The commit 99b5c5bb9a ("ALSA: hda - Remove the use of set_fs()")
converted the get_kctl_0dB_offset() call for killing set_fs() usage in
HD-audio codec code. The conversion assumed that the TLV callback
used in HD-audio code is only snd_hda_mixer_amp() and applies the TLV
calculation locally.
Although this assumption is correct, and all slave kctls are actually
with that callback, the current code is still utterly buggy; it
doesn't hit this condition and falls back to the next check. It's
because the function gets called after adding slave kctls to vmaster.
By assigning a slave kctl, the slave kctl object is faked inside
vmaster code, and the whole kctl ops are overridden. Thus the
callback op points to a different value from what we've assumed.
More badly, as reported by the KERNEXEC and UDEREF features of PaX,
the code flow turns into the unexpected pitfall. The next fallback
check is SNDRV_CTL_ELEM_ACCESS_TLV_READ access bit, and this always
hits for each kctl with TLV. Then it evaluates the callback function
pointer wrongly as if it were a TLV array. Although currently its
side-effect is fairly limited, this incorrect reference may lead to an
unpleasant result.
For addressing the regression, this patch introduces a new helper to
vmaster code, snd_ctl_apply_vmaster_slaves(). This works similarly
like the existing map_slaves() in hda_codec.c: it loops over the slave
list of the given master, and applies the given function to each
slave. Then the initializer function receives the right kctl object
and we can compare the correct pointer instead of the faked one.
Also, for catching the similar breakage in future, give an error
message when the unexpected TLV callback is found and bail out
immediately.
Fixes: 99b5c5bb9a ("ALSA: hda - Remove the use of set_fs()")
Reported-by: PaX Team <pageexec@freemail.hu>
Cc: <stable@vger.kernel.org> # v4.13
Signed-off-by: Takashi Iwai <tiwai@suse.de>
While converting the error messages to the standard macros in the
commit 4e76a8833f ("ALSA: hda - Replace with standard printk"), a
superfluous '-' slipped in the code mistakenly. Its influence is
almost negligible, merely shows a dB value as negative integer instead
of positive integer (or vice versa) in the rare error message.
So let's kill this embarrassing byte to show more correct value.
Fixes: 4e76a8833f ("ALSA: hda - Replace with standard printk")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This reverts commit 275353bb68 to fix a regression which can abort
'alsactl' program in alsa-utils due to assertion in alsa-lib.
alsactl: control.c:2513: snd_ctl_elem_value_get_integer: Assertion `idx < sizeof(obj->value.integer.value) / sizeof(obj->value.integer.value[0])' failed.
alsactl: control.c:2976: snd_ctl_elem_value_get_integer: Assertion `idx < ARRAY_SIZE(obj->value.integer.value)' failed.
This commit is a band-aid. In a point of usage of ALSA control interface,
the drivers still bring an issue that they prevent userspace applications
to have a consistent way to parse each levels of the dimension information
via ALSA control interface.
Let me investigate this issue. Current implementation of the drivers
have three control element sets with dimension information:
* 'Monitor Mixer Volume' (type: integer)
* 'VMixer Volume' (type: integer)
* 'VU-meters' (type: boolean)
Although the number of elements named as 'Monitor Mixer Volume' differs
depending on drivers in this group, it can be calculated by macros
defined by each driver (= (BX_NUM - BX_ANALOG_IN) * BX_ANALOG_IN). Each
of the elements has one member for value and has dimension information
with 2 levels (= BX_ANALOG_IN * (BX_NUM - BX_ANALOG_IN)). For these
elements, userspace applications are expected to handle the dimension
information so that all of the elements construct a matrix where the
number of rows and columns are represented by the dimension information.
The same way is applied to elements named as 'VMixer Volume'. The number
of these elements can also be calculated by macros defined by each
drivers (= PX_ANALOG_IN * BX_ANALOG_IN). Each of the element has one
member for value and has dimension information with 2 levels
(= BX_ANALOG_IN * PX_ANALOG_IN). All of the elements construct a matrix
with the dimension information.
An element named as 'VU-meters' gets a different way in a point of
dimension information. The element includes 96 members for value. The
element has dimension information with 3 levels (= 3 or 2 * 16 * 2). For
this element, userspace applications are expected to handle the dimension
information so that all of the members for value construct a matrix
where the number of rows and columns are represented by the dimension
information. This is different from the way for the former.
As a summary, the drivers were not designed to produce a consistent way to
parse the dimension information. This makes it hard for general userspace
applications such as amixer to parse the information by a consistent way,
and actually no userspace applications except for 'echomixer' utilize the
dimension information. Additionally, no drivers excluding this group use
the information.
The reverted commit was written based on the latter way. A commit
860c1994a7 ('ALSA: control: add dimension validator for userspace
elements') is written based on the latter way, too. The patch should be
reconsider too in the same time to re-define a consistent way to parse the
dimension information.
Reported-by: Mark Hills <mark@xwax.org>
Reported-by: S. Christian Collins <s.chriscollins@gmail.com>
Fixes: 275353bb68 ('ALSA: echoaudio: purge contradictions between dimension matrix members and total number of members')
Cc: <stable@vger.kernel.org> # v4.8+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On recent Intel platforms (Haswell, Broadwell, Skylake, ApolloLake,
KabyLake, ...), the IEC Coding Type (ICT) bitfield in the Digital
Converter Control #3 needs to be set explicitly for HDMI/DisplayPort
High Bit Rate (HBR) audio playback to work. This was not required in
earlier platforms when HBR was first introduced. The ICT bits are
defined in Section 7.3.3.9 of the HDaudio 1.0a specification.
Since the ICT bitfield was not specified for HDAudio 1.0 devices
(before 2009), we only program it on machines more recent than
Haswell.
We tested that this fix is not needed on Baytrail-I (MinnowBoard
Turbot) and believe by extension it also does not apply to Braswell.
[ Moved AC_VERB_SET_DIGI_CONVERT_3 definition to the right place
by tiwai ]
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98797
Signed-off-by: Sriram Periyasamy <sriramx.periyasamy@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The hm->h.size is intended to hold the actual size of the hm struct
that is copied from userspace and should always be <= sizeof(*hm).
However, after copy_from_user(hm, puhm, hm->h.size), since userspace
process has full control over the memory region pointed by puhm, it is
possible that the value of hm->h.size is different from what is fetched-in
previously (get_user(hm->h.size, (u16 __user *)puhm)). In other words,
hm->h.size is overriden and the relation between hm->h.size and the hm
struct is broken.
This patch proposes to use a seperate variable, msg_size, to hold
the value of the first fetch and override hm->h.size to msg_size
after the second fetch to maintain the relation.
Signed-off-by: Meng Xu <mengxu.gatech@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
BUG_ON() is the worst choice for a trivial sanity check.
Either it should be removed or replaced with a softer one like
WARN_ON() if still really needed.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
* Add a jump target so that a bit of exception handling can be better
reused at the end of this function.
This issue was detected by using the Coccinelle software.
* The script "checkpatch.pl" pointed information out like the following.
ERROR: do not use assignment in if condition
Thus fix a few source code places.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
* Add a jump target so that a bit of exception handling can be better
reused at the end of this function.
This issue was detected by using the Coccinelle software.
* The script "checkpatch.pl" pointed information out like the following.
ERROR: do not use assignment in if condition
Thus fix a few source code places.
[ This also fixed a potential use-after-free at error path of
snd_opl3_hwdep_new(), too -- tiwai ]
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a jump target so that a bit of exception handling can be better reused
at the end of this function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a jump target so that a bit of common code can be better reused
at the end of this function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add jump targets so that a bit of exception handling can be better reused
at the end of these functions.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The CA0132 codec driver doesn't call the free function at its error
path of the probe, which leaves the allocated memory. Call
ca0132_free() properly at the error handling.
Fixes: a73d511c48 ("ALSA: hda/ca0132: Add unsol handler for DSP and jack detection")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When hda_codec_driver_probe meet error and return failure, we need
to free resource with patch_ops.free, or we will get resource leak.
Signed-off-by: Wang YanQing <udknight@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Intel ALC 700 needs this patch for jack detection function.
Because ALC700's jack detect function defaults is disable.
So alc700 needs pathc to enable jack detection function.
Signed-off-by: PeiSen Hou <pshou@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Commit fb087eaaef ("ALSA: hda - hdmi eld control created based on pcm")
forget to filter out invalid pcm numbers, if there is only one invalid pcm
number, then this issue causes we create eld control for invalid pcm silently,
but when there are more than one invalid pcm numbers, then this issue bring
probe error looks like below dmesg:
"
kernel: [ 1.647283] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops 0xc2967540)
kernel: [ 1.651192] snd_hda_intel 0000:00:03.0: Too many HDMI devices
kernel: [ 1.651195] snd_hda_intel 0000:00:03.0: Consider building the kernel with CONFIG_SND_DYNAMIC_MINORS=y
kernel: [ 1.651197] snd_hda_intel 0000:00:03.0: Too many HDMI devices
kernel: [ 1.651199] snd_hda_intel 0000:00:03.0: Consider building the kernel with CONFIG_SND_DYNAMIC_MINORS=y
kernel: [ 1.651201] snd_hda_intel 0000:00:03.0: Too many HDMI devices
kernel: [ 1.651203] snd_hda_intel 0000:00:03.0: Consider building the kernel with CONFIG_SND_DYNAMIC_MINORS=y
kernel: [ 1.651676] snd_hda_intel 0000:00:03.0: control 3:0:0:ELD:0 is already present
kernel: [ 1.651787] snd_hda_codec_hdmi: probe of hdaudioC0D0 failed with error -16
"
This patch add invalid pcm number filter before calling hdmi_create_eld_ctl.
Fixes: fb087eaaef ("ALSA: hda - hdmi eld control created based on pcm")
Signed-off-by: Wang YanQing <udknight@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
kfree on NULL pointer is a no-op and therefore checking is redundant.
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The asihpi driver has a debug printk code without proper KERN_
prefix. On recent kernels, KERN_CONT prefix is mandatory for
continued output lines. Put it properly.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_ac97_res_table are not supposed to change at runtime. All functions
working with snd_ac97_res_table provided by <sound/ac97_codec.h> work with
const snd_ac97_res_table. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Make these const as they are only used in a copy operation.
Done using Coccinelle:
@match disable optional_qualifier@
identifier s;
@@
static struct hw s = {...};
@ref@
position p;
identifier match.s;
@@
s@p
@good1@
position ref.p;
identifier match.s,f,c;
expression e;
@@
(
e = s@p
|
e = s@p.f
|
c(...,s@p.f,...)
|
c(...,s@p,...)
)
@bad depends on !good1@
position ref.p;
identifier match.s;
@@
s@p
@depends on forall !bad disable optional_qualifier@
identifier match.s;
@@
static
+ const
struct hw s;
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ac97_pcm are not supposed to change at runtime. All functions
working with ac97_pcm provided by <sound/ac97_codec.h> work with
const ac97_pcm. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ac97_pcm are not supposed to change at runtime. All functions
working with ac97_pcm provided by <sound/ac97_codec.h> work with
const ac97_pcm. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Lenovo G50-70 (17aa:3978) with Conexant codec chip requires the
similar workaround for the inverted stereo dmic like other Lenovo
models.
Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1020657
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a jump target so that a bit of exception handling can be better reused
at the end of this function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Dell laptops have another LED for mic-mute in addition to the master
mute. The former is tied with the capture switch (in a reverse way)
while the latter is tied with the master playback switch. We already
have an enum control to change the behavior for the master mute LED in
different ways, e.g. keeping always off or turning off at mute. But,
the mic-mute LED has no such management but its behavior is
hard-coded.
This patch implements an enum control to change the mic-mute LED
behavior like what we have for the master mute LED. The ctl provides
four modes: keep-on, keep-off, follow-capture and follow-mute. The
default mode is the last one, follow-mute, which follows the capture
mute, i.e. LED turning on when the capture is off, and turning off
when the capture is active.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add jump targets so that a bit of exception handling can be better reused
at the end of these functions.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
STAudio ADCIII has the same SSID as Hoontech STDSP24, but requires a
slightly different configuration. This patch allows user to choose
this model via model=staudio option to set the proper configuration
for the board.
Bugzilla: http://bugzilla.suse.com/show_bug.cgi?id=1048934
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The commit d42fe63d58 ("ALSA: emu10k1: Get rid of set_fs() usage")
converted the user-space copy hack with set_fs() to the direct
memcpy(), but one place was forgotten. This resulted in the error
from snd_emu10k1_init_efx(), eventually failed to load the driver.
Fix the missing piece.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196687
Fixes: d42fe63d58 ("ALSA: emu10k1: Get rid of set_fs() usage")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Make these const as they are only used in a copy operation.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Make these const as they are only passed as the 3rd argument to the
function snd_hda_gen_add_kctl, which is of type const.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Make these const as they are only used during a copy operation.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a jump target so that a bit of exception handling can be better reused
in these functions.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Omit an extra message for a memory allocation failure in this function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Omit an extra message for a memory allocation failure in this function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Omit an extra message for a memory allocation failure in this function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Make these const as they are only used during a copy operation.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Make these const as they are only used during a copy operation.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Make these const as they are only used during a copy operation.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Make these const as they are only used during a copy operation.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Make these const as they are only used during a copy operation.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Make this const as it is only used during a copy operation.
Done using Coccinelle
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Make these const as they are only used during a copy operation.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Make these const as they are only used during a copy operation.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Make this const as it is only used during a copy operation.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Make this const as it is only used during a copy operation.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Make these const as they are only used during a copy operation.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Make these const as they are only used during a copy operation.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
