Commit Graph

43 Commits

Author SHA1 Message Date
Joel Selvaraj
2a9e9daf75 drm/mipi-dsi: Introduce mipi_dsi_dcs_write_seq macro
A helper macro that can be used to simplify sending DCS commands.
It is useful in scenarios like panel initialization which can sometimes
involve sending lot of DCS commands.

Signed-off-by: Joel Selvaraj <jo@jsfamily.in>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/BY5PR02MB700952493EEB6F0E77DC8416D9DF9@BY5PR02MB7009.namprd02.prod.outlook.com
2022-06-24 22:34:39 +02:00
Rex-BC Chen
1498915233
drm/dsi: transfer DSI HS packets ending at the same time
Since a HS transmission is composed of an arbitrary number
of bytes that may not be an integer multiple of lanes, some
lanes may run out of data before others.
(Defined in 6.1.3 of mipi_DSI_specification_v.01-02-00)

However, for some DSI RX devices (for example, anx7625),
there is a limitation that packet number should be the same
on all DSI lanes. In other words, they need to end a HS at
the same time.

Because this limitation is for some specific DSI RX devices,
it is more reasonable to put the enable control in these
DSI RX drivers. If DSI TX driver knows the information,
they can adjust the setting for this situation.

Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220309073637.3591-2-rex-bc.chen@mediatek.com
2022-03-09 14:14:36 +01:00
Maxime Ripard
db6568498b
drm/mipi-dsi: Create devm device attachment
MIPI-DSI devices need to call mipi_dsi_attach() when their probe is done
to attach against their host.

However, at removal or when an error occurs, that attachment needs to be
undone through a call to mipi_dsi_detach().

Let's create a device-managed variant of the attachment function that
will automatically detach the device at unbind.

Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210910101218.1632297-5-maxime@cerno.tech
2021-09-24 19:25:33 +02:00
Maxime Ripard
a1419fb4a7
drm/mipi-dsi: Create devm device registration
Devices that take their data through the MIPI-DSI bus but are controlled
through a secondary bus like I2C have to register a secondary device on
the MIPI-DSI bus through the mipi_dsi_device_register_full() function.

At removal or when an error occurs, that device needs to be removed
through a call to mipi_dsi_device_unregister().

Let's create a device-managed variant of the registration function that
will automatically unregister the device at unbind.

Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210910101218.1632297-4-maxime@cerno.tech
2021-09-24 19:25:27 +02:00
Nicolas Boichat
0f3b68b66a drm/dsi: Add _NO_ to MIPI_DSI_* flags disabling features
Many of the DSI flags have names opposite to their actual effects,
e.g. MIPI_DSI_MODE_EOT_PACKET means that EoT packets will actually
be disabled. Fix this by including _NO_ in the flag names, e.g.
MIPI_DSI_MODE_NO_EOT_PACKET.

Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@samsung.com>
Reviewed-by: Xin Ji <xji@analogixsemi.com> # anx7625.c
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> # msm/dsi
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727094435.v3.1.I629b2366a6591410359c7fcf6d385b474b705ca2@changeid
2021-07-27 09:48:24 +02:00
Maxime Ripard
bacbab58f0
drm: Mention the power state requirement on side-channel operations
The drm_connector detect, drm_dp_aux transfer and mipi_dsi_host
operations typically require to access their underlying device to
perform what is expected of them.

However, there's no guarantee on the fact that the device has been
enabled through atomic_enable or similar that will usually power the
device. The access to an unpowered device is then an undefined behaviour
ranging from the access being ignored to a hard CPU hang.

Let's document that expectation to avoid as much as possible those
consequences.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210616141529.630719-3-maxime@cerno.tech
2021-06-23 14:32:27 +02:00
Jani Nikula
f4dea1aaa9 drm/dsi: add helpers for DSI compression mode and PPS packets
Add helper functions for sending the DSI compression mode and picture
parameter set data type packets. For the time being, limit the support
to using VESA DSC 1.1 and the default PPS. This may need updating if the
need arises for proprietary compression or non-default PPS, however keep
it simple for starters.

v2: Add missing EXPORT_SYMBOL

Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191028150047.22048-5-jani.nikula@intel.com
2019-11-07 15:00:16 +02:00
Thomas Gleixner
d2912cb15b treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19 17:09:55 +02:00
Linus Walleij
e982e3f020 drm: dsi: Add lane clock rate fields to DSI device
The DSI devices have a maximum operating frequency specified
in their data sheet per the MIPI specification, and DSI hosts
that can scale their frequency need this information to set
their clock dividers right.

As current panel drivers often lack this information, specify
that setting it to zero will make the DSI host use some
reasonable default.

Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181023072422.25754-1-linus.walleij@linaro.org
2018-10-24 16:26:35 +02:00
Vinay Simha BN
1a9d759331 drm/dsi: Implement DCS set/get display brightness
Provide a small convenience wrapper that set/get the display brightness.

Cc: John Stultz <john.stultz@linaro.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Archit Taneja <archit.taneja@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Vinay Simha BN <simhavcs@gmail.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-08-24 13:34:00 +02:00
Thierry Reding
bbdcf516a6 drm/dsi: Order DCS helpers by command code
Most of these helpers had been introduced in the correct order, but some
were simply appended, which wasn't detected when they were applied.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-08-24 13:33:24 +02:00
Thierry Reding
6308c983d7 drm/dsi: Make set_tear_scanline command consistent
Use a consistent name for the function that implements set_tear_scanline
and reword and reformat the kerneldoc slightly.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20160613133327.7630-1-thierry.reding@gmail.com
2016-07-12 13:19:26 +02:00
Thierry Reding
babb24fec1 drm/dsi: Add uevent callback
Implement a uevent callback for devices on the MIPI DSI bus. This
callback will append MODALIAS information to the uevent and allow
modules to be loaded when devices are added to the bus.

Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-06-13 10:45:57 +02:00
Vinay Simha BN
e839508163 drm/dsi: Implement set tear scanline
Provide a small convenience wrapper that transmits
a set_tear_scanline command.

v2:
  * helper function suggested by Thierry
    for set_tear_scanline
  * Also includes small build fixes from Sumit Semwal.

v3: one scanline parameter suggested by jani

v4: passing the payload properly as suggested by jani

Cc: Archit Taneja <archit.taneja@gmail.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Vinay Simha BN <simhavcs@gmail.com>
Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465285532-12676-1-git-send-email-simhavcs@gmail.com
2016-06-07 21:44:29 +02:00
Archit Taneja
97b6ae50e0 drm/dsi: Get DSI host by DT device node
MIPI DSI devices are inherently aware of their host because they share a
parent-child hierarchy in the device tree.

Non-DSI drivers that create DSI device don't have this data. In order to
get this information, they require to a phandle to the DSI host in the
device tree.

Maintain a list of all the DSI hosts that are currently registered. This
list will be used to find the struct mipi_dsi_host corresponding to the
device tree node passed to of_find_mipi_dsi_host_by_node().

Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-03-02 17:02:54 +01:00
Archit Taneja
509e42ce04 drm/dsi: Add routine to unregister a DSI device
A driver calling mipi_dsi_device_register_full() might want to remove
the device once it's done. It might also require it in an error handling
path in case something went wrong.

Create mipi_dsi_device_unregister() for this purpose and use it within
mipi_dsi_remove_device_fn() as it does the same thing.

Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-03-02 17:02:10 +01:00
Archit Taneja
bf4363ce3a drm/dsi: Try to match non-DT DSI devices
Add a device name field in struct mipi_dsi_device. This name is not the
same as the device name (which is of the format "hostname.reg"). When
the device is created via DT, this name is set to the modalias string.
In the non-DT case, the driver creating the DSI device provides the
name by populating a field in struct mipi_dsi_device_info.

Matching for DT case would be as it was before. For the non-DT case, we
compare the device and driver names. Other buses (like I2C/SPI) perform
a non-DT match by comparing the device name and entries in the driver's
id_table. Such a mechanism isn't used for the DSI bus.

Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-03-02 17:01:09 +01:00
Archit Taneja
c63ae8a968 drm/dsi: Use mipi_dsi_device_register_full() for DSI device creation
Use mipi_dsi_device_register_full() for device creation. This takes in
a struct mipi_dsi_device_info as a template to populate the DSI device
information.

The reason to introduce this is to have a way to create DSI devices not
available via DT. Drivers that want to create a DSI device can populate
a struct mipi_dsi_device_info and call this function. For DSI devices
available via DT, of_mipi_dsi_device_add() is used as before, but this
now calls mipi_dsi_device_register_full() internally.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-03-02 17:00:18 +01:00
Werner Johansson
6e8c9e3376 drm/dsi: Add Turn On/Shutdown Peripheral command helpers
The MIPI_DSI_TURN_ON_PERIPHERAL and MIPI_DSI_SHUTDOWN_PERIPHERAL packets
are required for some panels, for example the Panasonic VVX10F034N00.

Signed-off-by: Werner Johansson <werner.johansson@sonymobile.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-11-24 10:25:14 +01:00
Liu Ying
ec26d9e938 drm/dsi: Add a helper to get bits per pixel of MIPI DSI pixel format
Add a helper that can be used to obtain the number of bits per pixel
corresponding to a given MIPI DSI pixel format. This is useful in
bandwidth calculations, for example.

Signed-off-by: Liu Ying <Ying.Liu@freescale.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
[treding@nvidia.com: add kerneldoc comment and commit message]
Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-11-23 09:07:38 +01:00
Thierry Reding
99035e9931 drm/dsi: Do not require .owner field to be set
Drivers now no longer need to set the .owner field. It will be
automatically set at registration time.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-13 13:56:17 +01:00
Thierry Reding
3ef0592426 drm/dsi: Resolve MIPI DSI device from phandle
Add a function, of_find_mipi_dsi_device_by_node(), that can be used to
resolve a phandle to a MIPI DSI device.

Acked-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-13 13:56:14 +01:00
Thierry Reding
3b46d4a0de drm/dsi: Implement DCS set_{column,page}_address commands
Provide small convenience wrappers to set the column and page extents of
the frame memory accessed by the host processors.

Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-13 13:56:10 +01:00
Thierry Reding
5cc0af16fc drm/dsi: Implement DCS {get,set}_pixel_format commands
Provide small convenience wrappers to query or set the pixel format used
by the interface.

Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-13 13:56:07 +01:00
Thierry Reding
3d9a8fcf1c drm/dsi: Implement DCS get_power_mode command
Provide a small convenience wrapper that transmits a DCS get_power_mode
command. A set of bitmasks for the mode bits is also provided.

Acked-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-13 13:56:03 +01:00
Thierry Reding
2f16b89737 drm/dsi: Implement DCS soft_reset command
Provide a small convenience wrapper that transmits a DCS soft_reset
command.

Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-13 13:56:01 +01:00
Thierry Reding
083d573fd0 drm/dsi: Implement DCS nop command
Provide a small convenience wrapper that transmits a DCS nop command.

Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-13 13:55:59 +01:00
Thierry Reding
009081e087 drm/dsi: Add to DocBook documentation
Integrate the MIPI DSI helpers into DocBook and clean up various
kerneldoc warnings. Also add a brief DOC section and clarify some
aspects of the mipi_dsi_host struct's .transfer() operation.

Acked-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-13 13:55:57 +01:00
YoungJun Cho
42fe1e755d drm/dsi: Implement some standard DCS commands
Add helpers for the {enter,exit}_sleep_mode, set_display_{on,off} and
set_tear_{on,off} DCS commands.

Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
[treding: kerneldoc and other minor cleanup]
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-13 13:55:55 +01:00
Thierry Reding
550ab84836 drm/dsi: Implement generic read and write commands
Implement generic read and write commands. Selection of the proper data
type for packets is done automatically based on the number of parameters
or payload length.

Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-13 13:55:51 +01:00
YoungJun Cho
dbf30b6958 drm/dsi: Add mipi_dsi_set_maximum_return_packet_size() helper
This function can be used to set the maximum return packet size for a
MIPI DSI peripheral.

Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
[treding: endianess, kerneldoc, return value]
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-13 13:55:44 +01:00
Thierry Reding
ed6ff40ee7 drm/dsi: Constify mipi_dsi_msg
struct mipi_dsi_msg is a read-only structure, drivers should never need
to modify it. Make this explicit by making all references to the struct
const.

Acked-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-13 13:55:41 +01:00
Thierry Reding
960dd616f6 drm/dsi: Make mipi_dsi_dcs_{read,write}() symmetrical
Currently the mipi_dsi_dcs_write() function requires the DCS command
byte to be embedded within the write buffer whereas mipi_dsi_dcs_read()
has a separate parameter. Make them more symmetrical by adding an extra
command parameter to mipi_dsi_dcs_write().

The S6E8AA0 driver relies on the old asymmetric API and there's concern
that moving to the new API may be less efficient. Provide a new function
with the old semantics for those cases and make the S6E8AA0 driver use
it instead.

Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-13 13:55:36 +01:00
Thierry Reding
a52879e8d7 drm/dsi: Add message to packet translator
This commit introduces a new function, mipi_dsi_create_packet(), which
converts from a MIPI DSI message to a MIPI DSI packet. The MIPI DSI
packet is as close to the protocol described in the DSI specification as
possible and useful in drivers that need to write a DSI packet into a
FIFO to send a message off to the peripheral.

Suggested-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-13 13:55:26 +01:00
Thierry Reding
02acb76d72 drm/dsi: Introduce packet format helpers
Add two helpers, mipi_dsi_packet_format_is_{short,long}(), that help in
determining the format of a packet.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-13 13:55:24 +01:00
Inki Dae
d87f09abb3 drm/mipi-dsi: consider low power transmission
This patch adds a new flag, MIPI_DSI-MODE_LPM, to transmit data
in low power. With this flag, msg.flags has MIPI_DSI_MSG_USE_LPM
so that host driver of each SoC can clear or set relevant register
bit for low power transmission.

All host drivers shall support continuous clock behavior on the
Clock Lane, and optionally may support non-continuous clock behavior.
Both of them can transmit data in high speed of low power.

With each clock behavior, non-continuous or continuous clock mode,
host controller will transmit data in high speed by default so if
peripheral wants to receive data in low power, the peripheral driver
should set MIPI_DSI_MODE_LPM flag.

Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-09-20 00:56:08 +09:00
Thierry Reding
77df01dcd3 drm/dsi: Replace upcasting macro by function
Using a function instead of a macro provides proper type checking.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-08-06 16:44:16 +02:00
Thierry Reding
3c523d7d38 drm/dsi: Use peripheral's channel for DCS commands
When executing DCS commands, use the channel associated with the DSI
peripheral rather than one explicitly specified in the function call.
Devices shouldn't be able to step on each others' toes like this.

Acked-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-07-22 09:06:32 +02:00
Thierry Reding
371c359f83 drm/dsi: Make mipi_dsi_dcs_write() return ssize_t
This function returns the value of the struct mipi_dsi_host_ops'
.transfer() so make sure the return types are consistent.

Acked-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-07-22 09:06:16 +02:00
Alexandre Courbot
884d6a0b55 drm/dsi: Flag for non-continuous clock behavior
As per section 5.6.1 of the DSI specification, all DSI transmitters must
support continuous clock behavior on the clock lane, while non-continuous
mode support is only optional. Add a flag that allows devices to indicate
that they support non-continuous clock mode so host drivers can adapt
their behavior accordingly.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-07-14 10:22:26 +02:00
Thierry Reding
d16218030f drm/dsi: Support device shutdown
Hook up the MIPI DSI bus's .shutdown() function to allow drivers to
implement code that should be run when a device is shut down.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-06-05 16:42:19 +02:00
Andrzej Hajda
1d96d4a677 drm/mipi_dsi: add flags to DSI messages
This patch adds flags field to mipi_dsi_msg structure and two flags:
- MIPI_DSI_MSG_REQ_ACK - request ACK from peripheral for given message,
- MIPI_DSI_MSG_USE_LPM - use Low Power Mode to transmit message.
The first flag is usually helpful during DSI diagnostic, the second
flag is required by some peripherals during configuration phase.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-04-04 21:24:47 +09:00
Andrzej Hajda
068a002339 drm: Add MIPI DSI bus support
MIPI DSI bus allows to model DSI hosts and DSI peripherals using the
Linux driver model. DSI hosts are registered by the DSI host drivers.
During registration DSI peripherals will be created from the children
of the DSI host's device tree node. Support for registration from
board-setup code will be added later when needed.

DSI hosts expose operations which can be used by DSI peripheral drivers
to access associated devices.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-12-17 18:09:43 +01:00