According to the DW APB DMAC data book the minimum burst transaction
length is 1 and it's true for any version of the controller since
isn't parametrised in the coreAssembler so can't be changed at the
IP-core synthesis stage. The maximum burst transaction can vary from
channel to channel and from controller to controller depending on a
IP-core parameter the system engineer activated during the IP-core
synthesis. Let's initialise both min_burst and max_burst members of the
DMA controller descriptor with extreme values so the DMA clients could
use them to properly optimize the DMA requests. The channels and
controller-specific max_burst length initialization will be introduced
by the follow-up patches.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200723005848.31907-9-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Maximum block size DW DMAC configuration corresponds to the max segment
size DMA parameter in the DMA core subsystem notation. Lets set it with a
value specific to the probed DW DMA controller. It shall help the DMA
clients to create size-optimized SG-list items for the controller. This in
turn will cause less dw_desc allocations, less LLP reinitializations,
better DMA device performance.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200723005848.31907-8-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Full multi-block transfers functionality is enabled in DW DMA
controller only if CHx_MULTI_BLK_EN is set. But LLP-based transfers
can be executed only if hardcode channel x LLP register feature isn't
enabled, which can be switched on at the IP core synthesis for
optimization. If it's enabled then the LLP register is hardcoded to
zero, so the blocks chaining based on the LLPs is unsupported.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200723005848.31907-7-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Vinod Koul <vkoul@kernel.org>
There are DMA devices (like ours version of Synopsys DW DMAC) which have
DMA capabilities non-uniformly redistributed between the device channels.
In order to provide a way of exposing the channel-specific parameters to
the DMA engine consumers, we introduce a new DMA-device callback. In case
if provided it gets called from the dma_get_slave_caps() method and is
able to override the generic DMA-device capabilities.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200723005848.31907-6-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Some devices may lack the support of the hardware accelerated SG list
entries automatic walking through and execution. In this case a burden of
the SG list traversal and DMA engine re-initialization lies on the
DMA engine driver (normally implemented by using a DMA transfer completion
IRQ to recharge the DMA device with a next SG list entry). But such
solution may not be suitable for some DMA consumers. In particular SPI
devices need both Tx and Rx DMA channels work synchronously in order
to avoid the Rx FIFO overflow. In case if Rx DMA channel is paused for
some time while the Tx DMA channel works implicitly pulling data into the
Rx FIFO, the later will be eventually overflown, which will cause the data
loss. So if SG list entries aren't automatically fetched by the DMA
engine, but are one-by-one manually selected for execution in the
ISRs/deferred work/etc., such problem will eventually happen due to the
non-deterministic latencies of the service execution.
In order to let the DMA consumer know about the DMA device capabilities
regarding the hardware accelerated SG list traversal we introduce the
max_sg_burst capability. It is supposed to be initialized by the DMA engine
driver with 0 if there is no limitation of the number of SG entries
atomically executed and with non-zero value if there is such constraints,
so the upper limit is determined by the number set to the property.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200723005848.31907-5-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Some hardware aside from default 0/1 may have greater minimum burst
transactions length constraints. Here we introduce the DMA device
and slave capability, which if required can be initialized by the DMA
engine driver with the device-specific value.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200723005848.31907-4-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This array property is used to indicate the maximum burst transaction
length supported by each DMA channel.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20200723005848.31907-3-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Modern device tree bindings are supposed to be created as YAML-files
in accordance with dt-schema. This commit replaces the Synopsis
Designware DMA controller legacy bare text bindings with YAML file.
The only required prorties are "compatible", "reg", "#dma-cells" and
"interrupts", which will be used by the driver to correctly find the
controller memory region and handle its events. The rest of the properties
are optional, since in case if either "dma-channels" or "dma-masters" isn't
specified, the driver will attempt to auto-detect the IP core
configuration.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20200723005848.31907-2-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The CAP3 register contains information about the number of
HCHAN (High Capacity) and UCHAN (Ultra High Capacity) channels in UDMAP.
Based on this information the start indexes of the levels can be calculated
without a need of a table in the match data.
On am654 the CAP3 does not contain information about the number different
channels. Set up the tpl information based on the available documentation.
This change will allow to use the same compatible for different SoCs where
the only difference is the number of channel types.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200717120903.8774-3-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Extend NXP QDMA driver to check transmission errors
The NXP QDMA driver (fsl-qdma.c) does not check the status bits
that indicate if a DMA transfer has been completed successfully.
This patch extends the driver to do exactly this.
Signed-off-by: Mathias Koehrer <mathias.koehrer@etas.com>
Link: https://lore.kernel.org/r/744443c0462aac2df4754f99500a911527c0b235.camel@bosch.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Fixes the following W=1 kernel build warning(s):
drivers/dma/ioat/dma.c:202: warning: Function parameter or member 'ioat_chan' not described in 'ioat_update_pending'
drivers/dma/ioat/dma.c:202: warning: Excess function parameter 'ioat' description in 'ioat_update_pending'
drivers/dma/ioat/dma.c:465: warning: Function parameter or member 'ioat_chan' not described in 'ioat_check_space_lock'
drivers/dma/ioat/dma.c:465: warning: Excess function parameter 'ioat' description in 'ioat_check_space_lock'
drivers/dma/ioat/dma.c:591: warning: Function parameter or member 'ioat_chan' not described in '__cleanup'
drivers/dma/ioat/dma.c:591: warning: Function parameter or member 'phys_complete' not described in '__cleanup'
drivers/dma/ioat/dma.c:591: warning: Excess function parameter 'ioat' description in '__cleanup'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Leonid Ravich <Leonid.Ravich@emc.com>
Link: https://lore.kernel.org/r/20200714111546.1755231-18-lee.jones@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Fixes the following W=1 kernel build warning(s):
drivers/dma/ioat/init.c:608: warning: Function parameter or member 'c' not described in 'ioat_free_chan_resources'
drivers/dma/ioat/init.c:608: warning: Excess function parameter 'chan' description in 'ioat_free_chan_resources'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Logan Gunthorpe <logang@deltatee.com>
Link: https://lore.kernel.org/r/20200714111546.1755231-17-lee.jones@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Fixes the following W=1 kernel build warning(s):
drivers/dma/mv_xor_v2.c:168: warning: Function parameter or member 'clk' not described in 'mv_xor_v2_device'
drivers/dma/mv_xor_v2.c:168: warning: Function parameter or member 'reg_clk' not described in 'mv_xor_v2_device'
drivers/dma/mv_xor_v2.c:168: warning: Function parameter or member 'irq_tasklet' not described in 'mv_xor_v2_device'
drivers/dma/mv_xor_v2.c:168: warning: Function parameter or member 'hw_queue_idx' not described in 'mv_xor_v2_device'
drivers/dma/mv_xor_v2.c:168: warning: Function parameter or member 'msi_desc' not described in 'mv_xor_v2_device'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200714111546.1755231-16-lee.jones@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Fixes the following W=1 kernel build warning(s):
drivers/dma/xgene-dma.c:310: warning: Function parameter or member 'dev' not described in 'xgene_dma'
drivers/dma/xgene-dma.c:310: warning: Function parameter or member 'clk' not described in 'xgene_dma'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Prasad Sahu <rsahu@apm.com>
Cc: Loc Ho <lho@apm.com>
Link: https://lore.kernel.org/r/20200714111546.1755231-15-lee.jones@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Fixes the following W=1 kernel build warning(s):
drivers/dma/nbpfaxi.c:157: warning: Function parameter or member 'chan' not described in 'nbpf_desc'
drivers/dma/nbpfaxi.c:220: warning: Function parameter or member 'tasklet' not described in 'nbpf_channel'
drivers/dma/nbpfaxi.c:220: warning: Function parameter or member 'slave_src_addr' not described in 'nbpf_channel'
drivers/dma/nbpfaxi.c:220: warning: Function parameter or member 'slave_src_width' not described in 'nbpf_channel'
drivers/dma/nbpfaxi.c:220: warning: Function parameter or member 'slave_src_burst' not described in 'nbpf_channel'
drivers/dma/nbpfaxi.c:220: warning: Function parameter or member 'slave_dst_addr' not described in 'nbpf_channel'
drivers/dma/nbpfaxi.c:220: warning: Function parameter or member 'slave_dst_width' not described in 'nbpf_channel'
drivers/dma/nbpfaxi.c:220: warning: Function parameter or member 'slave_dst_burst' not described in 'nbpf_channel'
drivers/dma/nbpfaxi.c:220: warning: Function parameter or member 'running' not described in 'nbpf_channel'
drivers/dma/nbpfaxi.c:220: warning: Function parameter or member 'paused' not described in 'nbpf_channel'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@chromium.org>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: netdev@vger.kernel.org
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20200714111546.1755231-14-lee.jones@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Also remove superfluous entry.
Fixes the following W=1 kernel build warning(s):
drivers/dma/iop-adma.c:418: warning: Function parameter or member 'chan' not described in 'iop_adma_alloc_chan_resources'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200714111546.1755231-13-lee.jones@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Fixes the following W=1 kernel build warning(s):
drivers/dma/imx-sdma.c:383: warning: Function parameter or member 'slave_config' not described in 'sdma_channel'
drivers/dma/imx-sdma.c:383: warning: Function parameter or member 'context_loaded' not described in 'sdma_channel'
drivers/dma/imx-sdma.c:383: warning: Function parameter or member 'terminate_worker' not described in 'sdma_channel'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Link: https://lore.kernel.org/r/20200714111546.1755231-12-lee.jones@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Kerneldoc formatting for attributes should be '@.*: '.
Fixes the following W=1 kernel build warning(s):
drivers/dma/fsl-qdma.c:154: warning: Function parameter or member 'data' not described in 'fsl_qdma_format'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Wen He <wen.he_1@nxp.com>
Cc: Jiaheng Fan <jiaheng.fan@nxp.com>
Link: https://lore.kernel.org/r/20200714111546.1755231-11-lee.jones@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
No attempt has been made to document any of the demoted functions here.
Fixes the following W=1 kernel build warning(s):
drivers/dma/sun4i-dma.c:321: warning: Function parameter or member 'priv' not described in '__execute_vchan_pending'
drivers/dma/sun4i-dma.c:321: warning: Function parameter or member 'vchan' not described in '__execute_vchan_pending'
drivers/dma/sun4i-dma.c:435: warning: Function parameter or member 'chan' not described in 'generate_ndma_promise'
drivers/dma/sun4i-dma.c:435: warning: Function parameter or member 'src' not described in 'generate_ndma_promise'
drivers/dma/sun4i-dma.c:435: warning: Function parameter or member 'dest' not described in 'generate_ndma_promise'
drivers/dma/sun4i-dma.c:435: warning: Function parameter or member 'len' not described in 'generate_ndma_promise'
drivers/dma/sun4i-dma.c:435: warning: Function parameter or member 'sconfig' not described in 'generate_ndma_promise'
drivers/dma/sun4i-dma.c:435: warning: Function parameter or member 'direction' not described in 'generate_ndma_promise'
drivers/dma/sun4i-dma.c:501: warning: Function parameter or member 'chan' not described in 'generate_ddma_promise'
drivers/dma/sun4i-dma.c:501: warning: Function parameter or member 'src' not described in 'generate_ddma_promise'
drivers/dma/sun4i-dma.c:501: warning: Function parameter or member 'dest' not described in 'generate_ddma_promise'
drivers/dma/sun4i-dma.c:501: warning: Function parameter or member 'len' not described in 'generate_ddma_promise'
drivers/dma/sun4i-dma.c:501: warning: Function parameter or member 'sconfig' not described in 'generate_ddma_promise'
drivers/dma/sun4i-dma.c:577: warning: Function parameter or member 'contract' not described in 'get_next_cyclic_promise'
drivers/dma/sun4i-dma.c:596: warning: Function parameter or member 'vd' not described in 'sun4i_dma_free_contract'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: "Emilio López" <emilio@elopez.com.ar>
Link: https://lore.kernel.org/r/20200714111546.1755231-10-lee.jones@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Fixes the following W=1 kernel build warning(s):
drivers/dma/at_hdmac.c:666: warning: Function parameter or member 'tx' not described in 'atc_tx_submit'
drivers/dma/at_hdmac.c:666: warning: Excess function parameter 'desc' description in 'atc_tx_submit'
drivers/dma/at_hdmac.c:1206: warning: Function parameter or member 'reg_width' not described in 'atc_dma_cyclic_check_values'
drivers/dma/at_hdmac.c:1206: warning: Function parameter or member 'buf_addr' not described in 'atc_dma_cyclic_check_values'
drivers/dma/at_hdmac.c:1206: warning: Function parameter or member 'period_len' not described in 'atc_dma_cyclic_check_values'
drivers/dma/at_hdmac.c:1228: warning: Function parameter or member 'chan' not described in 'atc_dma_cyclic_fill_desc'
drivers/dma/at_hdmac.c:1228: warning: Function parameter or member 'desc' not described in 'atc_dma_cyclic_fill_desc'
drivers/dma/at_hdmac.c:1228: warning: Function parameter or member 'period_index' not described in 'atc_dma_cyclic_fill_desc'
drivers/dma/at_hdmac.c:1228: warning: Function parameter or member 'buf_addr' not described in 'atc_dma_cyclic_fill_desc'
drivers/dma/at_hdmac.c:1228: warning: Function parameter or member 'reg_width' not described in 'atc_dma_cyclic_fill_desc'
drivers/dma/at_hdmac.c:1228: warning: Function parameter or member 'period_len' not described in 'atc_dma_cyclic_fill_desc'
drivers/dma/at_hdmac.c:1228: warning: Function parameter or member 'direction' not described in 'atc_dma_cyclic_fill_desc'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Link: https://lore.kernel.org/r/20200714111546.1755231-9-lee.jones@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Fix some misspelling/description issues, demote non-kerneldoc header
to standard comment block and provide a new description for
msgdma_desc_config()'s 'stride' parameter.
Fixes the following W=1 kernel build warning(s):
drivers/dma/altera-msgdma.c:163: warning: Function parameter or member 'node' not described in 'msgdma_sw_desc'
drivers/dma/altera-msgdma.c:163: warning: Function parameter or member 'tx_list' not described in 'msgdma_sw_desc'
drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'lock' not described in 'msgdma_device'
drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'dev' not described in 'msgdma_device'
drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'irq_tasklet' not described in 'msgdma_device'
drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'pending_list' not described in 'msgdma_device'
drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'free_list' not described in 'msgdma_device'
drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'active_list' not described in 'msgdma_device'
drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'done_list' not described in 'msgdma_device'
drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'desc_free_cnt' not described in 'msgdma_device'
drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'idle' not described in 'msgdma_device'
drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'dmadev' not described in 'msgdma_device'
drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'dmachan' not described in 'msgdma_device'
drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'hw_desq' not described in 'msgdma_device'
drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'sw_desq' not described in 'msgdma_device'
drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'npendings' not described in 'msgdma_device'
drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'slave_cfg' not described in 'msgdma_device'
drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'irq' not described in 'msgdma_device'
drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'csr' not described in 'msgdma_device'
drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'desc' not described in 'msgdma_device'
drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'resp' not described in 'msgdma_device'
drivers/dma/altera-msgdma.c:265: warning: Function parameter or member 'stride' not described in 'msgdma_desc_config'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Stefan Roese <sr@denx.de>
Link: https://lore.kernel.org/r/20200714111546.1755231-8-lee.jones@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Fixes the following W=1 kernel build warning(s):
drivers/dma/ste_dma40.c:398: warning: Function parameter or member 'dma_addr' not described in 'd40_lcla_pool'
drivers/dma/ste_dma40.c:601: warning: Function parameter or member 'dma_parms' not described in 'd40_base'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Per Forlin <per.forlin@stericsson.com>
Cc: Jonas Aaberg <jonas.aberg@stericsson.com>
Link: https://lore.kernel.org/r/20200714111546.1755231-7-lee.jones@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
No 'struct' title is provided. Nor are any attribute descriptions.
Fixes the following W=1 kernel build warning(s):
drivers/dma/pl330.c:295: warning: cannot understand function prototype: 'struct pl330_reqcfg '
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Jaswinder Singh <jassi.brar@samsung.com>
Link: https://lore.kernel.org/r/20200714111546.1755231-6-lee.jones@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
No attempt has been made to document any of the demoted functions here.
Fixes the following W=1 kernel build warning(s):
drivers/dma/mmp_pdma.c:298: warning: Function parameter or member 'chan' not described in 'start_pending_queue'
drivers/dma/mmp_pdma.c:393: warning: Function parameter or member 'dchan' not described in 'mmp_pdma_alloc_chan_resources'
drivers/dma/mmp_pdma.c:862: warning: Function parameter or member 'dchan' not described in 'mmp_pdma_issue_pending'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200714111546.1755231-5-lee.jones@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
A couple of entries were missed, causing kerneldoc to complain.
Fixes the following W=1 kernel build warning(s):
drivers/dma/ep93xx_dma.c:183: warning: Function parameter or member 'slave_config' not described in 'ep93xx_dma_chan'
drivers/dma/ep93xx_dma.c:215: warning: Function parameter or member 'hw_synchronize' not described in 'ep93xx_dma_engine'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Lennert Buytenhek <buytenh@wantstofly.org>
Cc: Ryan Mallon <rmallon@gmail.com>
Cc: Mika Westerberg <mika.westerberg@iki.fi>
Link: https://lore.kernel.org/r/20200714111546.1755231-4-lee.jones@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Fixes the following W=1 kernel build warning(s):
drivers/dma/of-dma.c:57: warning: Function parameter or member 'ofdma' not described in 'of_dma_router_xlate'
drivers/dma/of-dma.c:57: warning: Excess function parameter 'of_dma' description in 'of_dma_router_xlate'
drivers/dma/of-dma.c:107: warning: Function parameter or member 'data' not described in 'of_dma_controller_register'
drivers/dma/of-dma.c:308: warning: Function parameter or member 'ofdma' not described in 'of_dma_simple_xlate'
drivers/dma/of-dma.c:308: warning: Excess function parameter 'of_dma' description in 'of_dma_simple_xlate'
drivers/dma/of-dma.c:338: warning: Function parameter or member 'ofdma' not described in 'of_dma_xlate_by_chan_id'
drivers/dma/of-dma.c:338: warning: Excess function parameter 'of_dma' description in 'of_dma_xlate_by_chan_id'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200714111546.1755231-3-lee.jones@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Struct attribute names must be an exact match or the kerneldoc checker
gets confused.
Fixes the following W=1 kernel build warning(s):
drivers/dma/mediatek/mtk-hsdma.c:120: warning: Function parameter or member 'desc1' not described in 'mtk_hsdma_pdesc'
drivers/dma/mediatek/mtk-hsdma.c:120: warning: Function parameter or member 'desc2' not described in 'mtk_hsdma_pdesc'
drivers/dma/mediatek/mtk-hsdma.c:120: warning: Function parameter or member 'desc3' not described in 'mtk_hsdma_pdesc'
drivers/dma/mediatek/mtk-hsdma.c:120: warning: Function parameter or member 'desc4' not described in 'mtk_hsdma_pdesc'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Sean Wang <sean.wang@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: linux-mediatek@lists.infradead.org
Link: https://lore.kernel.org/r/20200714111546.1755231-2-lee.jones@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes.
This code was detected with the help of Coccinelle and, audited and
fixed manually.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Addresses-KSPP-ID: https://github.com/KSPP/linux/issues/83
Link: https://lore.kernel.org/r/20200619224334.GA7857@embeddedor
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Move the uc->tchan/rchan checks to the IO wrappers itself instead of
calling the functions with tchan/rchan directly.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Link: https://lore.kernel.org/r/20200707102352.28773-6-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Instead of using higher level wrappers (udma_rchanrt/tchanrt read/write),
use the underlying register access functions directly.
This will allow changes in the higher level wrappers within the DMAengine
driver.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Link: https://lore.kernel.org/r/20200707102352.28773-5-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The register offsets and functions are the same among TCHAN and RCHAN.
Use generic, common names for them.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Link: https://lore.kernel.org/r/20200707102352.28773-4-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The ring_get_occ is redundant as the k3_ringacc_ring_pop() is also
checking the occ of the ring.
With removing the ring_get_occ, the function can be simplified as well.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Link: https://lore.kernel.org/r/20200707102352.28773-3-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The descriptors are allocated via wither dma_pool or dma_alloc_coherent.
There is no need for the dma_sync_singel_* calls.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Link: https://lore.kernel.org/r/20200707102352.28773-2-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Fix build errors when CONFIG_PCI_MSI is not enabled by making the
driver depend on PCI_MSI:
ld: drivers/dma/idxd/device.o: in function `idxd_mask_msix_vector':
device.c:(.text+0x26f): undefined reference to `pci_msi_mask_irq'
ld: drivers/dma/idxd/device.o: in function `idxd_unmask_msix_vector':
device.c:(.text+0x2af): undefined reference to `pci_msi_unmask_irq'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: dmaengine@vger.kernel.org
Cc: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/9dee3f46-70d9-ea75-10cb-5527ab297d1d@infradead.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This patch adds the qurik to use burst transfers only
for pl330 controller, even for request with a length of 1.
Although, the correct way should be: if the peripheral request
length is 1, the peripheral should use SINGLE request, and then
notify the dmac using SINGLE mode by src/dst_maxburst with 1.
For example, on the Rockchip SoCs, all the peripherals can use
SINGLE or BURST request by setting GRF registers. it is possible
that if these peripheral drivers are used only for Rockchip SoCs.
Unfortunately, it's not, such as dw uart, which is used so widely,
and we can't set src/dst_maxburst according to the SoCs' specific
to compatible with all the other SoCs.
So, for convenience, all the peripherals are set as BURST request
by default on the Rockchip SoCs. even for request with a length of 1.
the current pl330 driver will perform SINGLE transfer if the client's
maxburst is 1, which still should be working according to chapter 2.6.6
of datasheet which describe how DMAC performs SINGLE transfers for
a BURST request. Unfortunately, it's broken on the Rockchip SoCs,
which support only matching transfers, such as BURST transfer for
BURST request, SINGLE transfer for SINGLE request.
Finally, we add the quirk to specify pl330 to use burst transfers only.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Link: https://lore.kernel.org/r/1593439555-68130-5-git-send-email-sugar.zhang@rock-chips.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
There is no reason to limit the performance on the 'NO-FLUSHP' SoCs,
because 'FLUSHP' instruction is broken on these platforms, so remove
the limit to improve the efficiency.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Link: https://lore.kernel.org/r/1593439555-68130-2-git-send-email-sugar.zhang@rock-chips.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Switch driver to use MSIX mask and unmask instead of the ignore bit.
When ignore bit is cleared, we must issue an MMIO read to ensure writes
have all arrived and check and process any additional completions. The
ignore bit does not queue up any pending MSIX interrupts. The mask bit
however does. Use API call from interrupt subsystem to mask MSIX
interrupt since the hardware does not have convenient mask bit register.
Suggested-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/159319517621.70410.11816465052708900506.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add wq drain support. When a wq is being released, it needs to wait for
all in-flight operation to complete. A device control function
idxd_wq_drain() has been added to facilitate this. A wq drain call
is added to the char dev on release to make sure all user operations are
complete. A wq drain is also added before the wq is being disabled.
A drain command can take an unpredictable period of time. Interrupt support
for device commands is added to allow waiting on the command to
finish. If a previous command is in progress, the new submitter can block
until the current command is finished before proceeding. The interrupt
based submission will submit the command and then wait until a command
completion interrupt happens to complete. All commands are moved to the
interrupt based command submission except for the device reset during
probe, which will be polled.
Fixes: 42d279f913 ("dmaengine: idxd: add char driver to expose submission portal to userland")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/159319502515.69593.13451647706946040301.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
According to the datasheet of pl330:
Example 2-1 Using DMAGO with the debug instruction registers
1. Create a program for the DMA channel
2. Store the program in a region of system memory
3. Poll the DBGSTATUS Register to ensure that the debug is idle
4. Write to the DBGINST0 Register
5. Write to the DBGINST1 Register
6. Write zero to the DBGCMD Register
so, we should make sure the debug is idle before step 4/5/6, not
only step 6. if not, there maybe a risk that fail to write DBGINST0/1.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Link: https://lore.kernel.org/r/1591234598-78919-1-git-send-email-sugar.zhang@rock-chips.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
acpi_dev_get_resources() does perform the NULL pointer check against
ACPI companion device which is given as function parameter. Thus,
there is no need to duplicate this check in the caller.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200622181311.67649-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
