NULL check before kfree_sensitive function is not needed.
Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311301702.LxswfETY-lkp@intel.com/
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pre-store the valid value of the zip alg support related capability
register in hisi_zip_qm_init(), which will be called by hisi_zip_probe().
It can reduce the number of capability register queries and avoid
obtaining incorrect values in abnormal scenarios, such as reset failed
and the memory space disabled.
Fixes: db700974b6 ("crypto: hisilicon/zip - support zip capability")
Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pre-store the valid value of the sec alg support related capability
register in sec_qm_init(), which will be called by probe process.
It can reduce the number of capability register queries and avoid
obtaining incorrect values in abnormal scenarios, such as reset
failed and the memory space disabled.
Fixes: 921715b6b7 ("crypto: hisilicon/sec - get algorithm bitmap from registers")
Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pre-store the valid value of hpre alg support related capability
register in hpre_qm_init(), which will be called by hpre_probe().
It can reduce the number of capability register queries and avoid
obtaining incorrect values in abnormal scenarios, such as reset
failed and the memory space disabled.
Fixes: f214d59a06 ("crypto: hisilicon/hpre - support hpre capability")
Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In previous capability register implementation, qm irq related values
were read from capability registers dynamically when needed. But in
abnormal scenario, e.g. the core is timeout and the device needs to
soft reset and reset failed after disabling the MSE, the device can
not be removed normally, causing the following call trace:
| Call trace:
| pci_irq_vector+0xfc/0x140
| hisi_qm_uninit+0x278/0x3b0 [hisi_qm]
| hpre_remove+0x16c/0x1c0 [hisi_hpre]
| pci_device_remove+0x6c/0x264
| device_release_driver_internal+0x1ec/0x3e0
| device_release_driver+0x3c/0x60
| pci_stop_bus_device+0xfc/0x22c
| pci_stop_and_remove_bus_device+0x38/0x70
| pci_iov_remove_virtfn+0x108/0x1c0
| sriov_disable+0x7c/0x1e4
| pci_disable_sriov+0x4c/0x6c
| hisi_qm_sriov_disable+0x90/0x160 [hisi_qm]
| hpre_remove+0x1a8/0x1c0 [hisi_hpre]
| pci_device_remove+0x6c/0x264
| device_release_driver_internal+0x1ec/0x3e0
| driver_detach+0x168/0x2d0
| bus_remove_driver+0xc0/0x230
| driver_unregister+0x58/0xdc
| pci_unregister_driver+0x40/0x220
| hpre_exit+0x34/0x64 [hisi_hpre]
| __arm64_sys_delete_module+0x374/0x620
[...]
| Call trace:
| free_msi_irqs+0x25c/0x300
| pci_disable_msi+0x19c/0x264
| pci_free_irq_vectors+0x4c/0x70
| hisi_qm_pci_uninit+0x44/0x90 [hisi_qm]
| hisi_qm_uninit+0x28c/0x3b0 [hisi_qm]
| hpre_remove+0x16c/0x1c0 [hisi_hpre]
| pci_device_remove+0x6c/0x264
[...]
The reason for this call trace is that when the MSE is disabled, the value
of capability registers in the BAR space become invalid. This will make the
subsequent unregister process get the wrong irq vector through capability
registers and get the wrong irq number by pci_irq_vector().
So add a capability table structure to pre-store the valid value of the irq
information capability register in qm init process, avoid obtaining invalid
capability register value after the MSE is disabled.
Fixes: 3536cc55ca ("crypto: hisilicon/qm - support get device irq information from hardware registers")
Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Extract a public function to set qm algs and remove
the similar code for setting qm algs in each module.
Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com>
Signed-off-by: Hao Fang <fanghao11@huawei.com>
Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Factor out duplicated skcipher fallback handling code to a helper function
sahara_aes_fallback(). Also, keep a single check if fallback is required in
sahara_aes_crypt().
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The "error" field in sahara_dev struct hasn't been needed/used since commit
c0c3c89ae3 ("crypto: sahara - replace tasklets with kthread"), so remove
the remaining references.
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Do not call dma_unmap_sg() for scatterlists that were not mapped
successfully.
Fixes: 5de8875281 ("crypto: sahara - Add driver for SAHARA2 accelerator.")
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
It's not always the case that the entire sg entry needs to be processed.
Currently, when cryptlen is less than sg->legth, "Descriptor length" errors
are encountered.
The error was noticed when testing xts(sahara-ecb-aes) with arbitrary sized
input data. To fix this, take the actual request size into account when
populating the hw links.
Fixes: 5de8875281 ("crypto: sahara - Add driver for SAHARA2 accelerator.")
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
update() calls should not modify the result buffer, so add an additional
check for "rctx->last" to make sure that only the final hash value is
copied into the buffer.
Fixes the following selftest failure:
alg: ahash: sahara-sha256 update() used result buffer on test vector 3,
cfg="init+update+final aligned buffer"
Fixes: 5a2bb93f59 ("crypto: sahara - add support for SHA1/256")
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The kernel crypto API requires that all CBC implementations update the IV
buffer to contain the last ciphertext block.
This fixes the following cbc selftest error:
alg: skcipher: sahara-cbc-aes encryption test failed (wrong output IV) on
test vector 0, cfg="in-place (one sglist)"
Fixes: 5de8875281 ("crypto: sahara - Add driver for SAHARA2 accelerator.")
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove the FLAGS_NEW_KEY logic as it has the following issues:
- the wrong key may end up being used when there are multiple data streams:
t1 t2
setkey()
encrypt()
setkey()
encrypt()
encrypt() <--- key from t2 is used
- switching between encryption and decryption with the same key is not
possible, as the hdr flags are only updated when a new setkey() is
performed
With this change, the key is always sent along with the cryptdata when
performing encryption/decryption operations.
Fixes: 5de8875281 ("crypto: sahara - Add driver for SAHARA2 accelerator.")
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Macro dma_map_sg() may return 0 on error. This patch enables
checks in case of the macro failure and ensures unmapping of
previously mapped buffers with dma_unmap_sg().
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: 49186a7d9e ("crypto: inside_secure - Avoid dma map if size is zero")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There are limited number CPT LFs (example 64 LFs on cn10k) and
these LFs are allocated/attached to CPT VF on its creation.
cptpf sysfs parameter "kvf_limits" defines number of CPT LFs
per CPT VF. Default "kvf_limits" is initialized to zero and if
kvf_limits is zero then number of LF allocated are equal to
online cpus in system.
For example on 24 core system, 24 CPT LFs will be attached per VF.
That means no CPT LF available when creating more than 2 CPT VFs
on system which have total 64 LFs. Although VFs gets created but
no LF attached to it.
There seems no reason to default allocate as many LFs as many
online cpus in system. This patch initializes "kvf_limits" to
one to limit one LF allocated per CPT VF. "kvf_limits" can
be changed in range of 1 to number-of-online-cpus via sysfs.
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There is a possibility that the function adf_devmgr_pci_to_accel_dev()
might return a NULL pointer.
Add a NULL pointer check in the function rp2srv_show().
Fixes: dbc8876dd8 ("crypto: qat - add rp2svc sysfs attribute")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: David Guckian <david.guckian@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If the function validate_user_input() returns an error, the error path
attempts to unlock an unacquired mutex.
Acquire the mutex before calling validate_user_input(). This is not
strictly necessary but simplifies the code.
Fixes: d9fb840837 ("crypto: qat - add rate limiting feature to qat_4xxx")
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The input argument `sla_in` is a pointer to a structure that contains
the parameters of the SLA which is being added or updated.
If this pointer is NULL, the function should return an error as
the data required for the algorithm is not available.
By mistake, the logic jumps to the error path which dereferences
the pointer.
This results in a warnings reported by the static analyzer Smatch when
executed without a database:
drivers/crypto/intel/qat/qat_common/adf_rl.c:871 add_update_sla()
error: we previously assumed 'sla_in' could be null (see line 812)
This issue was not found in internal testing as the pointer cannot be
NULL. The function add_update_sla() is only called (indirectly) by
the rate limiting sysfs interface implementation in adf_sysfs_rl.c
which ensures that the data structure is allocated and valid. This is
also proven by the fact that Smatch executed with a database does not
report such error.
Fix it by returning with error if the pointer `sla_in` is NULL.
Fixes: d9fb840837 ("crypto: qat - add rate limiting feature to qat_4xxx")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When dma_map_single() fails, wa->address is supposed to be freed
by the callers of ccp_init_dm_workarea() through ccp_dm_free().
However, many of the call spots don't expect to have to call
ccp_dm_free() on failure of ccp_init_dm_workarea(), which may
lead to a memleak. Let's free wa->address in ccp_init_dm_workarea()
when dma_map_single() fails.
Fixes: 63b945091a ("crypto: ccp - CCP device driver and interface support")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Return crypto_aead_setkey() in order to transfer the error if
it fails.
Fixes: d2c8ac187f ("crypto: sa2ul - Add AEAD algorithm support")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
1. Remove redundant array element, prevent the size obtained by
ARRAY_SIZE() from qm_log_hw_error is greater than actual size.
2. Add comments in function qm_set_vf_mse() and qm_cq_ctx_cfg()
to make it easier to understand.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The 'QM_INIT' and 'QM_CLOSE' status of qm and 'QP_INIT'
and 'QP_CLOSE' status of queue are not actually used. Currently,
driver only needs to switch status when the device or queue
is enabled or stopped, Therefore, remove unneeded status to
simplify driver. In addition, rename'QM_START to'QM_WORK' for
ease to understand.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
1. Remove unnecessary brackets in function hisi_acc_create_sgl_pool().
2. Modify local variable type, ensure that the variable type is
consistent with the variable type to be compared.
3. Because the function clear_hw_sgl_sge() is in the task process,
obtain the value of le16_to_cpu(hw_sgl->entry_sum_in_sgl) before
loop execting to shorten the loop execution time.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
To meet specific application scenarios, the function of switching between
the high performance mode and the high compression mode is added.
Use the perf_mode=0/1 configuration to set the compression high perf mode,
0(default, high compression mode), 1(high performance mode). These two
modes only apply to the compression direction and are compatible with
software algorithm in both directions.
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The qat_rl sysfs attribute group is registered within the adf_dev_start()
function, alongside other driver components.
If any of the functions preceding the group registration fails,
the adf_dev_start() function returns, and the caller, to undo the
operation, invokes adf_dev_stop() followed by adf_dev_shutdown().
However, the current flow lacks information about whether the
registration of the qat_rl attribute group was successful or not.
In cases where this condition is encountered, an error similar to
the following might be reported:
4xxx 0000:6b:00.0: Starting device qat_dev0
4xxx 0000:6b:00.0: qat_dev0 started 9 acceleration engines
4xxx 0000:6b:00.0: Failed to send init message
4xxx 0000:6b:00.0: Failed to start device qat_dev0
sysfs group 'qat_rl' not found for kobject '0000:6b:00.0'
...
sysfs_remove_groups+0x2d/0x50
adf_sysfs_rl_rm+0x44/0x70 [intel_qat]
adf_rl_stop+0x2d/0xb0 [intel_qat]
adf_dev_stop+0x33/0x1d0 [intel_qat]
adf_dev_down+0xf1/0x150 [intel_qat]
...
4xxx 0000:6b:00.0: qat_dev0 stopped 9 acceleration engines
4xxx 0000:6b:00.0: Resetting device qat_dev0
To prevent attempting to remove attributes from a group that has not
been added yet, a flag named 'sysfs_added' is introduced. This flag
is set to true upon the successful registration of the attribute group.
Fixes: d9fb840837 ("crypto: qat - add rate limiting feature to qat_4xxx")
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The qat_ras sysfs attribute group is registered within the
adf_dev_start() function, alongside other driver components.
If any of the functions preceding the group registration fails,
the adf_dev_start() function returns, and the caller, to undo the
operation, invokes adf_dev_stop() followed by adf_dev_shutdown().
However, the current flow lacks information about whether the
registration of the qat_ras attribute group was successful or not.
In cases where this condition is encountered, an error similar to
the following might be reported:
4xxx 0000:6b:00.0: Starting device qat_dev0
4xxx 0000:6b:00.0: qat_dev0 started 9 acceleration engines
4xxx 0000:6b:00.0: Failed to send init message
4xxx 0000:6b:00.0: Failed to start device qat_dev0
sysfs group 'qat_ras' not found for kobject '0000:6b:00.0'
...
sysfs_remove_groups+0x29/0x50
adf_sysfs_stop_ras+0x4b/0x80 [intel_qat]
adf_dev_stop+0x43/0x1d0 [intel_qat]
adf_dev_down+0x4b/0x150 [intel_qat]
...
4xxx 0000:6b:00.0: qat_dev0 stopped 9 acceleration engines
4xxx 0000:6b:00.0: Resetting device qat_dev0
To prevent attempting to remove attributes from a group that has not
been added yet, a flag named 'sysfs_added' is introduced. This flag
is set to true upon the successful registration of the attribute group.
Fixes: 532d7f6bc4 ("crypto: qat - add error counters")
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Doing ipsec produces a spinlock recursion warning.
This is due to crypto_finalize_request() being called in the upper half.
Move virtual data queue processing of virtio-crypto driver to tasklet.
Fixes: dbaf0624ff ("crypto: add virtio-crypto driver")
Reported-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: wangyangxin <wangyangxin1@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Aad requires padding with zeroes up to 15 bytes in some cases. This
patch increases the allocated buffer size for aad and prevents the
driver accessing uninitialized memory region.
v1->v2: Specify reason for alloc size change in descriptions.
Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Hardware could not clear irq status without resetting the entire module.
Driver receives irq immediately when mask bit is cleared causing
intermittent errors in RSA calculations. Switch to use csr polling for
done status instead.
Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Change AMBA_PL08X to required dependency as the hash ops depends on it
for data transfer.
Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This fixes list_add corruption error when the driver is returned
with -EPROBE_DEFER. It is also required to roll back the previous
probe sequences in case of deferred_probe. So, this removes
'err_probe_defer" goto label and just use err_dma_init instead.
Fixes: 42ef0e944b ("crypto: starfive - Add crypto engine support")
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The "ring" variable has an upper bounds check but nothing checks for
negatives. This code uses kstrtouint() already and it was obviously
intended to be declared as unsigned int. Make it so.
Fixes: dbc8876dd8 ("crypto: qat - add rp2svc sysfs attribute")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Simplify sun8i_ss_hashkey() by using crypto_shash_tfm_digest() instead
of an alloc+init+update+final sequence. This should also improve
performance.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The 'offset' type is unsigned long in 'struct debugfs_reg32',
so type of values casts to unsigned long long is incorrect, and the
values do not require type cast, remove them.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When device is abnormal and reports abnormal interrupt event to driver,
the driver can print device information for error analysis. This patch
adds some device error-related information output after the device reports
an abnormal interrupt.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The heuristics used by gcc triggers false positive truncation
warnings in hifn_alg_alloc.
Add checks on snprintf calls to silence these warnings, including
the one for cra_driver_name even though it does not currently trigger
a gcc warning.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The heuristics used by gcc triggers false positive truncation
warnings in hifn_alg_alloc. The warnings are false positives
because nengines is at most 2.
Make the buffer bigger and change the snprintf to use unsigned
integers to eliminate these warnings.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The heuristics used by gcc triggers false positive truncation
warnings in hifn_alg_alloc. The warning triggered by the strings
here are clearly false positives (see
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=95755).
Add checks on snprintf calls to silence these warnings, including
the one for cra_driver_name even though it does not currently trigger
a gcc warning.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The function pointer crypto_ahash::init is an internal implementation
detail of the ahash API that exists to help it support both ahash and
shash algorithms. With an upcoming refactoring of how the ahash API
supports shash algorithms, this field will be removed.
Some drivers are invoking crypto_ahash::init to call into their own
code, which is unnecessary and inefficient. The talitos driver is one
of those drivers. Make it just call its own code directly.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The function pointer crypto_ahash::init is an internal implementation
detail of the ahash API that exists to help it support both ahash and
shash algorithms. With an upcoming refactoring of how the ahash API
supports shash algorithms, this field will be removed.
Some drivers are invoking crypto_ahash::init to call into their own
code, which is unnecessary and inefficient. The chelsio driver is one
of those drivers. Make it just call its own code directly.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The crypto API's support for alignmasks for ahash algorithms is nearly
useless, as its only effect is to cause the API to align the key and
result buffers. The drivers that happen to be specifying an alignmask
for ahash rarely actually need it. When they do, it's easily fixable,
especially considering that these buffers cannot be used for DMA.
In preparation for removing alignmask support from ahash, this patch
makes the stm32 driver no longer use it. This driver didn't actually
rely on it; it only writes to the result buffer in stm32_hash_finish(),
simply using memcpy(). And stm32_hash_setkey() does not assume any
alignment for the key buffer.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The crypto API's support for alignmasks for ahash algorithms is nearly
useless, as its only effect is to cause the API to align the key and
result buffers. The drivers that happen to be specifying an alignmask
for ahash rarely actually need it. When they do, it's easily fixable,
especially considering that these buffers cannot be used for DMA.
In preparation for removing alignmask support from ahash, this patch
makes the starfive driver no longer use it. This driver did actually
rely on it, but only for storing to the result buffer using int stores
in starfive_hash_copy_hash(). This patch makes
starfive_hash_copy_hash() use put_unaligned() instead. (It really
should use a specific endianness, but that's an existing bug.)
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The crypto API's support for alignmasks for ahash algorithms is nearly
useless, as its only effect is to cause the API to align the key and
result buffers. The drivers that happen to be specifying an alignmask
for ahash rarely actually need it. When they do, it's easily fixable,
especially considering that these buffers cannot be used for DMA.
In preparation for removing alignmask support from ahash, this patch
makes the rockchip driver no longer use it. This driver didn't actually
rely on it; it only writes to the result buffer in rk_hash_run(),
already using put_unaligned_le32(). And this driver only supports
unkeyed hash algorithms, so the key buffer need not be considered.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The crypto API's support for alignmasks for ahash algorithms is nearly
useless, as its only effect is to cause the API to align the key and
result buffers. The drivers that happen to be specifying an alignmask
for ahash rarely actually need it. When they do, it's easily fixable,
especially considering that these buffers cannot be used for DMA.
In preparation for removing alignmask support from ahash, this patch
makes the omap-sham driver no longer use it. This driver did actually
rely on it, but only for storing to the result buffer using __u32 stores
in omap_sham_copy_ready_hash(). This patch makes
omap_sham_copy_ready_hash() use put_unaligned() instead. (It really
should use a specific endianness, but that's an existing bug.)
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The crypto API's support for alignmasks for ahash algorithms is nearly
useless, as its only effect is to cause the API to align the key and
result buffers. The drivers that happen to be specifying an alignmask
for ahash rarely actually need it. When they do, it's easily fixable,
especially considering that these buffers cannot be used for DMA.
In preparation for removing alignmask support from ahash, this patch
makes the talitos driver no longer use it. This driver didn't actually
rely on it; it only writes to the result buffer in
common_nonsnoop_hash_unmap(), simply using memcpy(). And this driver's
"ahash_setkey()" function does not assume any alignment for the key
buffer.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The crypto API's support for alignmasks for ahash algorithms is nearly
useless, as its only effect is to cause the API to align the key and
result buffers. The drivers that happen to be specifying an alignmask
for ahash rarely actually need it. When they do, it's easily fixable,
especially considering that these buffers cannot be used for DMA.
In preparation for removing alignmask support from ahash, this patch
makes the s5p-sss driver no longer use it. This driver didn't actually
rely on it; it only writes to the result buffer in
s5p_hash_copy_result(), simply using memcpy(). And this driver only
supports unkeyed hash algorithms, so the key buffer need not be
considered.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The crypto API's support for alignmasks for ahash algorithms is nearly
useless, as its only effect is to cause the API to align the key and
result buffers. The drivers that happen to be specifying an alignmask
for ahash rarely actually need it. When they do, it's easily fixable,
especially considering that these buffers cannot be used for DMA.
In preparation for removing alignmask support from ahash, this patch
makes the mxs-dcp driver no longer use it. This driver didn't actually
rely on it; it only writes to the result buffer in dcp_sha_req_to_buf(),
using a bytewise copy. And this driver only supports unkeyed hash
algorithms, so the key buffer need not be considered.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The crypto API's support for alignmasks for ahash algorithms is nearly
useless, as its only effect is to cause the API to align the key and
result buffers. The drivers that happen to be specifying an alignmask
for ahash rarely actually need it. When they do, it's easily fixable,
especially considering that these buffers cannot be used for DMA.
In preparation for removing alignmask support from ahash, this patch
makes the artpec6 driver no longer use it. This driver is unusual in
that it DMAs the digest directly to the result buffer. This is broken
because the crypto API provides the result buffer as an arbitrary
virtual address, which might not be valid for DMA, even after the crypto
API applies the alignmask. Maybe the alignmask (which this driver set
only to 3) made this code work in a few more cases than it otherwise
would have. But even if so, it doesn't make sense for this single
driver that is broken anyway to block removal of the alignmask support.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The crypto API's support for alignmasks for ahash algorithms is nearly
useless, as its only effect is to cause the API to align the key and
result buffers. The drivers that happen to be specifying an alignmask
for ahash rarely actually need it. When they do, it's easily fixable,
especially considering that these buffers cannot be used for DMA.
In preparation for removing alignmask support from ahash, this patch
makes the atmel driver no longer use it. This driver didn't actually
rely on it; it only writes to the result buffer in
atmel_sha_copy_ready_hash(), simply using memcpy(). And this driver
didn't set an alignmask for any keyed hash algorithms, so the key buffer
need not be considered.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The crypto API's support for alignmasks for ahash algorithms is nearly
useless, as its only effect is to cause the API to align the key and
result buffers. The drivers that happen to be specifying an alignmask
for ahash rarely actually need it. When they do, it's easily fixable,
especially considering that these buffers cannot be used for DMA.
In preparation for removing alignmask support from ahash, this patch
makes the sun8i-ss driver no longer use it. This driver didn't actually
rely on it; it only writes to the result buffer in sun8i_ss_hash_run(),
simply using memcpy(). And sun8i_ss_hmac_setkey() does not assume any
alignment for the key buffer.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The crypto API's support for alignmasks for ahash algorithms is nearly
useless, as its only effect is to cause the API to align the key and
result buffers. The drivers that happen to be specifying an alignmask
for ahash rarely actually need it. When they do, it's easily fixable,
especially considering that these buffers cannot be used for DMA.
In preparation for removing alignmask support from ahash, this patch
makes the sun8i-ce driver no longer use it. This driver didn't actually
rely on it; it only writes to the result buffer in sun8i_ce_hash_run(),
simply using memcpy(). And this driver only supports unkeyed hash
algorithms, so the key buffer need not be considered.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The crypto API's support for alignmasks for ahash algorithms is nearly
useless, as its only effect is to cause the API to align the key and
result buffers. The drivers that happen to be specifying an alignmask
for ahash rarely actually need it. When they do, it's easily fixable,
especially considering that these buffers cannot be used for DMA.
In preparation for removing alignmask support from ahash, this patch
makes the sun4i-ss driver no longer use it. This driver didn't actually
rely on it; it only writes to the result buffer in sun4i_hash(), already
using the unaligned access helpers. And this driver only supports
unkeyed hash algorithms, so the key buffer need not be considered.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If a request has the flag CRYPTO_TFM_REQ_MAY_BACKLOG set, the function
qat_alg_send_message_maybacklog(), enqueues it in a backlog list if
either (1) there is already at least one request in the backlog list, or
(2) the HW ring is nearly full or (3) the enqueue to the HW ring fails.
If an interrupt occurs right before the lock in qat_alg_backlog_req() is
taken and the backlog queue is being emptied, then there is no request
in the HW queues that can trigger a subsequent interrupt that can clear
the backlog queue. In addition subsequent requests are enqueued to the
backlog list and not sent to the hardware.
Fix it by holding the lock while taking the decision if the request
needs to be included in the backlog queue or not. This synchronizes the
flow with the interrupt handler that drains the backlog queue.
For performance reasons, the logic has been changed to try to enqueue
first without holding the lock.
Fixes: 3868238397 ("crypto: qat - add backlog mechanism")
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Closes: https://lore.kernel.org/all/af9581e2-58f9-cc19-428f-6f18f1f83d54@redhat.com/T/
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The file adf_cfg_services.h cannot be included in header files since it
instantiates the structure adf_cfg_services. Move that structure to its
own file and export the symbol.
This does not introduce any functional change.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add the attribute `num_rps` to the `qat` attribute group. This returns
the number of ring pairs that a single device has. This allows to know
the maximum value that can be set to the attribute `rp2svc`.
Signed-off-by: Ciunas Bennett <ciunas.bennett@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add the attribute `rp2svc` to the `qat` attribute group. This provides a
way for a user to query a specific ring pair for the type of service
that is currently configured for.
When read, the service will be returned for the defined ring pair.
When written to this value will be stored as the ring pair to return
the service of.
Signed-off-by: Ciunas Bennett <ciunas.bennett@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add an interface for the rate limiting feature which allows to add,
remove and modify a QAT SLA (Service Level Agreement).
This adds a new sysfs attribute group, `qat_rl`, which can be accessed
from /sys/bus/pci/devices/<BUS:DEV:FUNCTION> with the following
hierarchy:
|-+ qat_rl
|---- id (RW) # SLA identifier
|---- cir (RW) # Committed Information Rate
|---- pir (RW) # Peak Information Rate
|---- srv (RW) # Service to be rate limited
|---- rp (RW) (HEX) # Ring pairs to be rate limited
|---- cap_rem (RW) # Remaining capability for a service
|---- sla_op (WO) # Allows to perform an operation on an SLA
The API works by setting the appropriate RW attributes and then
issuing a command through the `sla_op`. For example, to create an SLA, a
user needs to input the necessary data into the attributes cir, pir, srv
and rp and then write into `sla_op` the command `add` to execute the
operation.
The API also provides `cap_rem` attribute to get information about
the remaining device capability within a certain service which is
required when setting an SLA.
Signed-off-by: Ciunas Bennett <ciunas.bennett@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The Rate Limiting (RL) feature allows to control the rate of requests
that can be submitted on a ring pair (RP). This allows sharing a QAT
device among multiple users while ensuring a guaranteed throughput.
The driver provides a mechanism that allows users to set policies, that
are programmed to the device. The device is then enforcing those policies.
Configuration of RL is accomplished through entities called SLAs
(Service Level Agreement). Each SLA object gets a unique identifier
and defines the limitations for a single service across up to four
ring pairs (RPs count allocated to a single VF).
The rate is determined using two fields:
* CIR (Committed Information Rate), i.e., the guaranteed rate.
* PIR (Peak Information Rate), i.e., the maximum rate achievable
when the device has available resources.
The rate values are expressed in permille scale i.e. 0-1000.
Ring pair selection is achieved by providing a 64-bit mask, where
each bit corresponds to one of the ring pairs.
This adds an interface and logic that allow to add, update, retrieve
and remove an SLA.
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The QAT firmware provides a mechanism to retrieve its capabilities
through the init admin interface.
Add logic to retrieve the firmware capability mask from the firmware
through the init/admin channel. This mask reports if the
power management, telemetry and rate limiting features are supported.
The fw capabilities are stored in the accel_dev structure and are used
to detect if a certain feature is supported by the firmware loaded
in the device.
This is supported only by devices which have an admin AE.
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Some enums use the macro BIT. Include bits.h as it is missing.
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The admin API is growing and deserves its own include.
Move it from adf_common_drv.h to adf_admin.h.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The 4xxx drivers hardcode the ring to service mapping. However, when
additional configurations where added to the driver, the mappings were
not updated. This implies that an incorrect mapping might be reported
through pfvf for certain configurations.
Add an algorithm that computes the correct ring to service mapping based
on the firmware loaded on the device.
Fixes: 0cec19c761 ("crypto: qat - add support for compression for 4xxx")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The adf_fw_config structures hardcode a bit mask that represents the
acceleration engines (AEs) where a certain firmware image will have to
be loaded to. Remove the hardcoded masks and replace them with defines.
This does not introduce any functional change.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The logic that selects the correct adf_fw_config structure based on the
configured service is replicated twice in the uof_get_name() and
uof_get_ae_mask() functions. Refactor the code so that there is no
replication.
This does not introduce any functional change.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add logic to count correctable, non fatal and fatal error for QAT GEN4
devices.
These counters are reported through sysfs attributes in the group
qat_ras.
Signed-off-by: Shashank Gupta <shashank.gupta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Introduce ras counters interface for counting QAT specific device
errors and expose them through the newly created qat_ras sysfs
group attribute.
This adds the following attributes:
- errors_correctable: number of correctable errors
- errors_nonfatal: number of uncorrectable non fatal errors
- errors_fatal: number of uncorrectable fatal errors
- reset_error_counters: resets all counters
These counters are initialized during device bring up and cleared
during device shutdown and are applicable only to QAT GEN4 devices.
Signed-off-by: Shashank Gupta <shashank.gupta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add logic to detect, report and handle uncorrectable errors reported
through the ERRSOU3 register in QAT GEN4 devices.
Signed-off-by: Shashank Gupta <shashank.gupta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add the function adf_get_aram_base() which allows to return the
base address of the aram bar.
Signed-off-by: Shashank Gupta <shashank.gupta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add logic to detect, report and handle correctable and uncorrectable
errors related to the compression hardware.
These are detected through the EXPRPSSMXLT, EXPRPSSMCPR and EXPRPSSMDCPR
registers.
Signed-off-by: Shashank Gupta <shashank.gupta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add logic to detect, report and handle uncorrectable errors reported
through the ERRSOU2 register in QAT GEN4 devices.
Signed-off-by: Shashank Gupta <shashank.gupta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add logic to detect and report uncorrectable errors reported through
the ERRSOU1 register in QAT GEN4 devices.
This also introduces the adf_dev_err_mask structure as part of
adf_hw_device_data which will allow to provide different error masks
per device generation.
Signed-off-by: Shashank Gupta <shashank.gupta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add logic to detect and report correctable errors in QAT GEN4
devices.
This includes (1) enabling, disabling and handling error reported
through the ERRSOU0 register and (2) logic to log the errors
in the system log.
Signed-off-by: Shashank Gupta <shashank.gupta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add infrastructure for enabling, disabling and reporting errors in the QAT
driver. This adds a new structure, adf_ras_ops, to adf_hw_device_data that
contains the following methods:
- enable_ras_errors(): allows to enable RAS errors at device
initialization.
- disable_ras_errors(): allows to disable RAS errors at device shutdown.
- handle_interrupt(): allows to detect if there is an error and report if
a reset is required. This is executed immediately after the error is
reported, in the context of an ISR.
An initial, empty, implementation of the methods above is provided
for QAT GEN4.
Signed-off-by: Shashank Gupta <shashank.gupta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In the scenario where the accelerator business is fully loaded.
When the workqueue receiving messages and performing callback
processing, there are a large number of messages that need to be
received, and there are continuously messages that have been
processed and need to be received.
This will cause the receive loop here to be locked for a long time.
This scenario will cause watchdog timeout problems on OS with kernel
preemption turned off.
The error logs:
watchdog: BUG: soft lockup - CPU#23 stuck for 23s! [kworker/u262:1:1407]
[ 1461.978428][ C23] Call trace:
[ 1461.981890][ C23] complete+0x8c/0xf0
[ 1461.986031][ C23] kcryptd_async_done+0x154/0x1f4 [dm_crypt]
[ 1461.992154][ C23] sec_skcipher_callback+0x7c/0xf4 [hisi_sec2]
[ 1461.998446][ C23] sec_req_cb+0x104/0x1f4 [hisi_sec2]
[ 1462.003950][ C23] qm_poll_req_cb+0xcc/0x150 [hisi_qm]
[ 1462.009531][ C23] qm_work_process+0x60/0xc0 [hisi_qm]
[ 1462.015101][ C23] process_one_work+0x1c4/0x470
[ 1462.020052][ C23] worker_thread+0x150/0x3c4
[ 1462.024735][ C23] kthread+0x108/0x13c
[ 1462.028889][ C23] ret_from_fork+0x10/0x18
Therefore, it is necessary to add an actively scheduled operation in the
while loop to prevent this problem.
After adding it, no matter whether the OS turns on or off the kernel
preemption function. Neither will cause watchdog timeout issues.
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
The driver adapted here suffered from this wrong assumption and had
several error paths resulting in resource leaks.
The check for cryp being non-NULL is harmless. This can never happen as
.remove() is only called after .probe() completed successfully and in
that case drvdata was set to a non-NULL value. So this check can just be
dropped.
If pm_runtime_get() fails, the other resources held by the device must
still be freed. Only clk_disable_unprepare() should be skipped as the
pm_runtime_get() failed to call clk_prepare_enable().
After these changes the remove function returns zero unconditionally and
can trivially be converted to the prototype required for .remove_new().
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
The driver adapted here suffered from this wrong assumption and had an
error paths resulting in resource leaks.
If pm_runtime_get() fails, the other resources held by the device must
still be freed. Only clk_disable() should be skipped as the
pm_runtime_get() failed to call clk_enable().
After this change the remove function returns zero unconditionally and
can trivially be converted to the prototype required for .remove_new().
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
The driver adapted here suffers from this wrong assumption. Returning
-EBUSY if there are still users results in resource leaks and probably a
crash. Also further down passing the error code of caam_jr_shutdown() to
the caller only results in another error message and has no further
consequences compared to returning zero.
Still convert the driver to return no value in the remove callback. This
also allows to drop caam_jr_platform_shutdown() as the only function
called by it now has the same prototype.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Hari Prasath Gujulan Elango <hari.prasathge@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The zynqmp-sha3-384 algorithm sets a nonzero alignmask, but it doesn't
appear to actually need it. Therefore, stop setting it. This will
allow this algorithm to keep being registered after alignmask support is
removed from shash.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The stm32 crc32 algorithms set a nonzero alignmask, but they don't seem
to actually need it. Their ->update function already has code that
handles aligning the data to the same alignment that the alignmask
specifies, their ->setkey function already uses get_unaligned_le32(),
and their ->final function already uses put_unaligned_le32().
Therefore, stop setting the alignmask. This will allow these algorithms
to keep being registered after alignmask support is removed from shash.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
During hisilicon accelerator live migration operation. In order to
prevent the problem of EQ/AEQ interrupt loss. Migration driver will
trigger an EQ/AEQ doorbell at the end of the migration.
This operation may cause double interruption of EQ/AEQ events.
To ensure that the EQ/AEQ interrupt processing function is normal.
The interrupt handling functionality of EQ/AEQ needs to be updated.
Used to handle repeated interrupts event.
Fixes: b0eed08590 ("hisi_acc_vfio_pci: Add support for VFIO live migration")
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The heuristics used by gcc triggers false positive truncation
warnings in hifn_alg_alloc. The warning triggered by the strings
here are clearly false positives (see
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=95755).
Add checks on snprintf calls to silence these warnings, including
the one for cra_driver_name even though it does not currently trigger
a gcc warning.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
PSP firmware may report additional error information in the SEV command
buffer registers in situations where an error occurs as the result of an
SEV command. In this case, check if the command buffer registers have been
modified and if so, dump the contents.
Signed-off-by: John Allen <john.allen@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There is no need to free the reset_data structure if the recovery is
unsuccessful and the reset is synchronous. The function
adf_dev_aer_schedule_reset() handles the cleanup properly. Only
asynchronous resets require such structure to be freed inside the reset
worker.
Fixes: d8cba25d2c ("crypto: qat - Intel(R) QAT driver framework")
Signed-off-by: Svyatoslav Pankratov <svyatoslav.pankratov@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
MST pointed out: config change callback is also handled incorrectly
in this driver, it takes a mutex from interrupt context.
Handle config changed by work queue instead.
Cc: Gonglei (Arei) <arei.gonglei@huawei.com>
Cc: Halil Pasic <pasic@linux.ibm.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If the temporarily applied memory is used to set or get the xqc
information, the driver releases the memory immediately after the
hardware mailbox operation time exceeds the driver waiting time.
However, the hardware does not cancel the operation, so the hardware
may write data to released memory.
Therefore, when the driver is bound to a device, the driver reserves
memory for the xqc configuration. The subsequent xqc configuration
uses the reserved memory to prevent hardware from accessing the
released memory.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use preferred device_get_match_data() instead of of_match_device() to
get the driver match data. With this, adjust the includes to explicitly
include the correct headers.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Reviewed-by: Neal Liu <neal_liu@aspeedtech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The Compress and Verify (CnV) feature check and ensures data integrity
in the compression operation. The implementation of CnV keeps a record
of the CnV errors that have occurred since the driver was loaded.
Expose CnV error stats by providing the "cnv_errors" file under
debugfs. This includes the number of errors detected up to now and
the type of the last error. The error count is provided on a per
Acceleration Engine basis and it is reset every time the driver is loaded.
Signed-off-by: Lucas Segarra Fernandez <lucas.segarra.fernandez@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
QAT devices implement a mechanism that allows them to go autonomously
to a low power state depending on the load.
Expose power management info by providing the "pm_status" file under
debugfs. This includes PM state, PM event log, PM event counters, PM HW
CSRs, per-resource type constrain counters and per-domain power gating
status specific to the QAT device.
This information is retrieved from (1) the FW by means of
ICP_QAT_FW_PM_INFO command, (2) CSRs and (3) counters collected by the
device driver.
In addition, add logic to keep track and report power management event
interrupts and acks/nacks sent to FW to allow/prevent state transitions.
Signed-off-by: Lucas Segarra Fernandez <lucas.segarra.fernandez@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Include kernel.h for GENMASK(), kstrtobool() and types.
Add forward declaration for struct adf_accel_dev. Remove unneeded
include.
This change doesn't introduce any function change.
Signed-off-by: Lucas Segarra Fernandez <lucas.segarra.fernandez@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add hw_random interface support in qcom-rng driver as new IP block
in Qualcomm SoC has inbuilt NIST SP800 90B compliant entropic source
to generate true random number.
Keeping current rng_alg interface as well for random number generation
using Kernel Crypto API.
Signed-off-by: Om Prakash Singh <quic_omprsing@quicinc.com>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Om Prakash Singh <quic_omprsing@quicinc.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Create CRYPTO_QAT namespace for symbols exported by the qat_common
module and import those in the QAT drivers. It will reduce the global
namespace crowdedness and potential misuse or the API.
This does not introduce any functional change.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Lucas Segarra Fernandez <lucas.segarra.fernandez@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove the implementation of zlib-deflate because it is completely
unused in the kernel.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
When the Kunpeng accelerator executes tasks such as encryption
and decryption have minimum requirements on the number of device
queues. If the number of queues does not meet the requirement,
the process initialization will fail. Therefore, the driver checks
the number of queues on the device before registering the algorithm.
If the number does not meet the requirements, the driver does not register
the algorithm to crypto subsystem, the device is still added to the
qm_list.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The type of aeq has only 4bits in dw0 17 to 20bits, but 15bits(17 to
31bits) are read in function qm_aeq_thread(). The remaining 11bits(21
to 31bits) are reserved for aeq, but may not be 0. To avoid getting
incorrect value of type, other bits are cleared.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If the queue isolation feature is enabled, the number of queues
supported by the device changes. When PF is enabled using the
current default number of queues, the default number of queues may
be greater than the number supported by the device. As a result,
the PF fails to be bound to the driver.
After modification, if queue isolation feature is enabled, when
the default queue parameter is greater than the number supported
by the device, the number of enabled queues will be changed to
the number supported by the device, so that the PF and driver
can be properly bound.
Fixes: 8bbecfb402 ("crypto: hisilicon/qm - add queue isolation support for Kunpeng930")
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Returning an error code in the remove function of a platform device has
no effect (compared to returning zero) apart from an error message, that
the error is ignored. Then the device is removed irrespective of the
returned value.
As kmb_ocs_hcu_remove is only called after kmb_ocs_hcu_probe() returned
successfully, platform_get_drvdata() never returns NULL and so the
respective check can just be dropped.
crypto_engine_exit() might return an error code but already emits an
error message in that case, so better return zero in
kmb_ocs_hcu_remove() even in this case to suppress another error
message. All other crypto drivers also ignore the return value of
crypto_engine_exit().
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct adf_fw_counters.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Tom Rix <trix@redhat.com>
Cc: Adam Guerin <adam.guerin@intel.com>
Cc: Lucas Segarra Fernandez <lucas.segarra.fernandez@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: qat-linux@intel.com
Cc: linux-crypto@vger.kernel.org
Cc: llvm@lists.linux.dev
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Increase the size of the buffers used for composing the names used for
the transport debugfs entries and the vector name to avoid a potential
truncation.
This resolves the following errors when compiling the driver with W=1
and KCFLAGS=-Werror on GCC 12.3.1:
drivers/crypto/intel/qat/qat_common/adf_transport_debug.c: In function ‘adf_ring_debugfs_add’:
drivers/crypto/intel/qat/qat_common/adf_transport_debug.c💯60: error: ‘snprintf’ output may be truncated before the last format character [-Werror=format-truncation=]
drivers/crypto/intel/qat/qat_common/adf_isr.c: In function ‘adf_isr_resource_alloc’:
drivers/crypto/intel/qat/qat_common/adf_isr.c:197:47: error: ‘%d’ directive output may be truncated writing between 1 and 11 bytes into a region of size between 0 and 5 [-Werror=format-truncation=]
Fixes: a672a9dc87 ("crypto: qat - Intel(R) QAT transport code")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
key buffer is not copied in chachapoly_setkey function,
results in wrong output for encryption/decryption operation.
fix this by memcpy the key in caam_ctx key arrary
Fixes: d6bbd4eea2 ("crypto: caam/jr - add support for Chacha20 + Poly1305")
Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
key buffer is not copied in chachapoly_setkey function,
results in wrong output for encryption/decryption operation.
fix this by memcpy the key in caam_ctx key arrary
Fixes: c10a533679 ("crypto: caam/qi2 - add support for Chacha20 + Poly1305")
Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When sec_aead_mac_init returns an error code, sec_cipher_map
will exit abnormally, the hardware sgl should be unmmaped.
Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
QAT GEN4 devices support chained compression operations. These
allow, with a single request to firmware, to hash then compress
data.
Extend the configuration to enable such mode. The cfg_services
operations in sysfs are extended to allow the string "dcc". When
selected, the driver downloads to the device both the symmetric
crypto and the compression firmware images and sends an admin message
to firmware which enables `chained` operations.
In addition, it sets the device's capabilities as the combination
of compression and symmetric crypto capabilities, while excluding
the ICP_ACCEL_CAPABILITIES_CRYPTO_SYMMETRIC bit to indicate
that in this mode, symmetric crypto instances are not supported.
When "dcc" is enabled, the device will handle compression requests
as if the "dc" configuration is loaded ("dcc" is a variation of "dc")
and the driver will register the acomp algorithms.
As for the other extended configurations, "dcc" is only available for
qat_4xxx devices and the chaining service will be only accessible from
user space.
Signed-off-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The data structure that associates a service id with its name is
replicated across the driver.
Remove duplication by moving this data structure to a new include file,
adf_cfg_services.h in order to have consistency across the drivers.
Note that the data structure is re-instantiated every time the new
include is added to a compilation unit.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The function adf_dev_init(), through the subsystem qat_compression,
populates the list of list of compression instances
accel_dev->compression_list. If the list of instances is not empty,
the function adf_dev_start() will then call qat_compression_registers()
register the compression algorithms into the crypto framework.
If any of the functions in adf_dev_start() fail, the caller of such
function, in the error path calls adf_dev_down() which in turn call
adf_dev_stop() and adf_dev_shutdown(), see for example the function
state_store in adf_sriov.c.
However, if the registration of compression algorithms is not done,
adf_dev_stop() will try to unregister the algorithms regardless.
This might cause the counter active_devs in qat_compression.c to get
to a negative value.
Add a new state, ADF_STATUS_COMPRESSION_ALGS_REGISTERED, which tracks
if the compression algorithms are registered into the crypto framework.
Then use this to unregister the algorithms if such flag is set. This
ensures that the compression algorithms are only unregistered if
previously registered.
Fixes: 1198ae56c9 ("crypto: qat - expose deflate through acomp api for QAT GEN2")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The function adf_dev_init(), through the subsystem qat_crypto, populates
the list of list of crypto instances accel_dev->crypto_list.
If the list of instances is not empty, the function adf_dev_start() will
then call qat_algs_registers() and qat_asym_algs_register() to register
the crypto algorithms into the crypto framework.
If any of the functions in adf_dev_start() fail, the caller of such
function, in the error path calls adf_dev_down() which in turn call
adf_dev_stop() and adf_dev_shutdown(), see for example the function
state_store in adf_sriov.c.
However, if the registration of crypto algorithms is not done,
adf_dev_stop() will try to unregister the algorithms regardless.
This might cause the counter active_devs in qat_algs.c and
qat_asym_algs.c to get to a negative value.
Add a new state, ADF_STATUS_CRYPTO_ALGS_REGISTERED, which tracks if the
crypto algorithms are registered into the crypto framework. Then use
this to unregister the algorithms if such flag is set. This ensures that
the crypto algorithms are only unregistered if previously registered.
Fixes: d8cba25d2c ("crypto: qat - Intel(R) QAT driver framework")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If the device is already in the up state, a subsequent write of `up` to
the sysfs attribute /sys/bus/pci/devices/<BDF>/qat/state brings the
device down.
Fix this behaviour by ignoring subsequent `up` commands if the device is
already in the up state.
Fixes: 1bdc85550a ("crypto: qat - fix concurrency issue when device state changes")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Do not shadow the return code from adf_dev_down() in the error path of
the DEV_DOWN command.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Commit 1bdc85550a ("crypto: qat - fix concurrency issue when device
state changes") introduced the function adf_dev_down() which wraps the
functions adf_dev_stop() and adf_dev_shutdown().
In a subsequent change, the sequence adf_dev_stop() followed by
adf_dev_shutdown() was then replaced across the driver with just a call
to the function adf_dev_down().
The functions adf_dev_stop() and adf_dev_shutdown() are called in error
paths to stop the accelerator and free up resources and can be called
even if the counterparts adf_dev_init() and adf_dev_start() did not
complete successfully.
However, the implementation of adf_dev_down() prevents the stop/shutdown
sequence if the device is found already down.
For example, if adf_dev_init() fails, the device status is not set as
started and therefore a call to adf_dev_down() won't be calling
adf_dev_shutdown() to undo what adf_dev_init() did.
Do not check if a device is started in adf_dev_down() but do the
equivalent check in adf_sysfs.c when handling a DEV_DOWN command from
the user.
Fixes: 2b60f79c7b ("crypto: qat - replace state machine calls")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove the support of zlib-deflate and gzip.
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Reviewed-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add the deflate algorithm support for hisilicon zip hardware.
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
On some SOCs DBC is supported through the PSP mailbox instead of
the platform mailbox. This capability is advertised in the PSP
capabilities register. Allow using this communication path if
supported.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Offsets are checked by the capabilities register in multiple places.
To make the code more readable add a macro.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
DBC is currently accessed only from the platform access mailbox and
a lot of that implementation's communication path is intertwined
with DBC. Add an abstraction layer for pointers into the mailbox.
No intended functional changes.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The PSP mailbox supports a number of extended sub-commands. These
subcommands are placed in the header of the buffer sent to the mailbox.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
With the PSP mailbox registers supporting more than just TEE, access to
them must be maintained and serialized by the PSP device support. Remove
TEE support direct access and create an interface in the PSP support
where the register access can be controlled/serialized.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Rijo Thomas <Rijo-john.Thomas@amd.com>
Tested-by: Rijo Thomas <Rijo-john.Thomas@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This error handling looks really strange.
Check if the string has been truncated instead.
Fixes: 02ab994635 ("crypto: hisilicon - Fixed some tiny bugs of HPRE")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Improve AES/XTS performance of 6-way unrolling for PowerPC up
to 17% with tcrypt. This is done by using one instruction,
vpermxor, to replace xor and vsldoi.
The same changes were applied to OpenSSL code and a pull request was
submitted.
This patch has been tested with the kernel crypto module tcrypt.ko and
has passed the selftest. The patch is also tested with
CONFIG_CRYPTO_MANAGER_EXTRA_TESTS enabled.
Signed-off-by: Danny Tsen <dtsen@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Convert list_for_each() to list_for_each_entry() so that the list_itr
list_head pointer and list_entry() call are no longer needed, which
can reduce a few lines of code. No functional changed.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
dbc_dev_init() gets a free page from `GFP_KERNEL`, but if that page has
any data in it the first nonce request will fail.
This prevents dynamic boost control from probing. To fix this, explicitly
request a zeroed page with `__GFP_ZERO` to ensure first nonce fetch works.
Fixes: c04cf9e14f ("crypto: ccp - Add support for fetching a nonce for dynamic boost control")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
API:
- Move crypto engine callback from tfm ctx into algorithm object.
- Fix atomic sleep bug in crypto_destroy_instance.
- Move lib/mpi into lib/crypto.
Algorithms:
- Add chacha20 and poly1305 implementation for powerpc p10.
Drivers:
- Add AES skcipher and aead support to starfive.
- Add Dynamic Boost Control support to ccp.
- Add support for STM32P13 platform to stm32.
-----BEGIN PGP SIGNATURE-----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=LbcA
-----END PGP SIGNATURE-----
Merge tag 'v6.6-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Move crypto engine callback from tfm ctx into algorithm object
- Fix atomic sleep bug in crypto_destroy_instance
- Move lib/mpi into lib/crypto
Algorithms:
- Add chacha20 and poly1305 implementation for powerpc p10
Drivers:
- Add AES skcipher and aead support to starfive
- Add Dynamic Boost Control support to ccp
- Add support for STM32P13 platform to stm32"
* tag 'v6.6-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (149 commits)
Revert "dt-bindings: crypto: qcom,prng: Add SM8450"
crypto: chelsio - Remove unused declarations
X.509: if signature is unsupported skip validation
crypto: qat - fix crypto capability detection for 4xxx
crypto: drivers - Explicitly include correct DT includes
crypto: engine - Remove crypto_engine_ctx
crypto: zynqmp - Use new crypto_engine_op interface
crypto: virtio - Use new crypto_engine_op interface
crypto: stm32 - Use new crypto_engine_op interface
crypto: jh7110 - Use new crypto_engine_op interface
crypto: rk3288 - Use new crypto_engine_op interface
crypto: omap - Use new crypto_engine_op interface
crypto: keembay - Use new crypto_engine_op interface
crypto: sl3516 - Use new crypto_engine_op interface
crypto: caam - Use new crypto_engine_op interface
crypto: aspeed - Remove non-standard sha512 algorithms
crypto: aspeed - Use new crypto_engine_op interface
crypto: amlogic - Use new crypto_engine_op interface
crypto: sun8i-ss - Use new crypto_engine_op interface
crypto: sun8i-ce - Use new crypto_engine_op interface
...
- Add vfio-ap support to pass-through crypto devices to secure execution
guests
- Add API ordinal 6 support to zcrypt_ep11misc device drive, which is
required to handle key generate and key derive (e.g. secure key to
protected key) correctly
- Add missing secure/has_secure sysfs files for the case where it is not
possible to figure where a system has been booted from. Existing user
space relies on that these files are always present
- Fix DCSS block device driver list corruption, caused by incorrect
error handling
- Convert virt_to_pfn() and pfn_to_virt() from defines to static inline
functions to enforce type checking
- Cleanups, improvements, and minor fixes to the kernel mapping setup
- Fix various virtual vs physical address confusions
- Move pfault code to separate file, since it has nothing to do with
regular fault handling
- Move s390 documentation to Documentation/arch/ like it has been done
for other architectures already
- Add HAVE_FUNCTION_GRAPH_RETVAL support
- Factor out the s390_hypfs filesystem and add a new config option for
it. The filesystem is deprecated and as soon as all users are gone it
can be removed some time in the not so near future
- Remove support for old CEX2 and CEX3 crypto cards from zcrypt device
driver
- Add support for user-defined certificates: receive user-defined
certificates with a diagnose call and provide them via 'cert_store'
keyring to user space
- Couple of other small fixes and improvements all over the place
-----BEGIN PGP SIGNATURE-----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=ewd9
-----END PGP SIGNATURE-----
Merge tag 's390-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- Add vfio-ap support to pass-through crypto devices to secure
execution guests
- Add API ordinal 6 support to zcrypt_ep11misc device drive, which is
required to handle key generate and key derive (e.g. secure key to
protected key) correctly
- Add missing secure/has_secure sysfs files for the case where it is
not possible to figure where a system has been booted from. Existing
user space relies on that these files are always present
- Fix DCSS block device driver list corruption, caused by incorrect
error handling
- Convert virt_to_pfn() and pfn_to_virt() from defines to static inline
functions to enforce type checking
- Cleanups, improvements, and minor fixes to the kernel mapping setup
- Fix various virtual vs physical address confusions
- Move pfault code to separate file, since it has nothing to do with
regular fault handling
- Move s390 documentation to Documentation/arch/ like it has been done
for other architectures already
- Add HAVE_FUNCTION_GRAPH_RETVAL support
- Factor out the s390_hypfs filesystem and add a new config option for
it. The filesystem is deprecated and as soon as all users are gone it
can be removed some time in the not so near future
- Remove support for old CEX2 and CEX3 crypto cards from zcrypt device
driver
- Add support for user-defined certificates: receive user-defined
certificates with a diagnose call and provide them via 'cert_store'
keyring to user space
- Couple of other small fixes and improvements all over the place
* tag 's390-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (66 commits)
s390/pci: use builtin_misc_device macro to simplify the code
s390/vfio-ap: make sure nib is shared
KVM: s390: export kvm_s390_pv*_is_protected functions
s390/uv: export uv_pin_shared for direct usage
s390/vfio-ap: check for TAPQ response codes 0x35 and 0x36
s390/vfio-ap: handle queue state change in progress on reset
s390/vfio-ap: use work struct to verify queue reset
s390/vfio-ap: store entire AP queue status word with the queue object
s390/vfio-ap: remove upper limit on wait for queue reset to complete
s390/vfio-ap: allow deconfigured queue to be passed through to a guest
s390/vfio-ap: wait for response code 05 to clear on queue reset
s390/vfio-ap: clean up irq resources if possible
s390/vfio-ap: no need to check the 'E' and 'I' bits in APQSW after TAPQ
s390/ipl: refactor deprecated strncpy
s390/ipl: fix virtual vs physical address confusion
s390/zcrypt_ep11misc: support API ordinal 6 with empty pin-blob
s390/paes: fix PKEY_TYPE_EP11_AES handling for secure keyblobs
s390/pkey: fix PKEY_TYPE_EP11_AES handling for sysfs attributes
s390/pkey: fix PKEY_TYPE_EP11_AES handling in PKEY_VERIFYKEY2 IOCTL
s390/pkey: fix PKEY_TYPE_EP11_AES handling in PKEY_KBLOB2PROTK[23]
...
These declarations are not implemented now, remove them.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When extending the capability detection logic for 4xxx devices the
SMx algorithms were accidentally missed.
Enable these SMx capabilities by default for QAT GEN4 devices.
Check for device variants where the SMx algorithms are explicitly
disabled by the GEN4 hardware. This is indicated in fusectl1
register.
Mask out SM3 and SM4 based on a bit specific to those algorithms.
Mask out SM2 if the PKE slice is not present.
Fixes: 4b44d28c71 ("crypto: qat - extend crypto capability detection for 4xxx")
Signed-off-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Algorithms must never be added to a driver unless there is a generic
implementation. These truncated versions of sha512 slipped through.
Remove them as they are useless.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The header file jh7110-cryp uses ahash_request without including
crypto/hash.h. Fix that by adding the inclusion.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The callbacks for prepare and unprepare request in crypto_engine
is superfluous. They can be done directly from do_one_request.
Move the code into do_one_request and remove the unused callbacks.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The callbacks for prepare and unprepare request in crypto_engine
is superfluous. They can be done directly from do_one_request.
Move the code into do_one_request and remove the unused callbacks.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The callbacks for prepare and unprepare request in crypto_engine
is superfluous. They can be done directly from do_one_request.
Move the code into do_one_request and remove the unused callbacks.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The callbacks for prepare and unprepare request in crypto_engine
is superfluous. They can be done directly from do_one_request.
Move the code into do_one_request and remove the unused callbacks.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The callbacks for prepare and unprepare request in crypto_engine
is superfluous. They can be done directly from do_one_request.
Move the code into do_one_request and remove the unused callbacks.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The callbacks for prepare and unprepare request in crypto_engine
is superfluous. They can be done directly from do_one_request.
Move the code into do_one_request and remove the unused callbacks.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The callbacks for prepare and unprepare request in crypto_engine
is superfluous. They can be done directly from do_one_request.
Move the code into do_one_request and remove the unused callbacks.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The callbacks for prepare and unprepare request in crypto_engine
is superfluous. They can be done directly from do_one_request.
Move the code into do_one_request and remove the unused callbacks.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The callbacks for prepare and unprepare request in crypto_engine
is superfluous. They can be done directly from do_one_request.
Move the code into do_one_request and remove the unused callbacks.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The callbacks for prepare and unprepare request in crypto_engine
is superfluous. They can be done directly from do_one_request.
Move the code into do_one_request and remove the unused callbacks.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The callbacks for prepare and unprepare request in crypto_engine
is superfluous. They can be done directly from do_one_request.
Move the code into do_one_request and remove the unused callbacks.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The callbacks for prepare and unprepare request in crypto_engine
is superfluous. They can be done directly from do_one_request.
Move the code into do_one_request and remove the unused callbacks.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Some newer SoCs (like SM8450) do not require a clock vote for the PRNG
to function. Make it entirely optional and rely on the bindings checker
to ensure platforms that need it, consume one.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Some configurations with gcc-12 or gcc-13 produce a warning for the source
and destination of a memcpy() in atmel_sha_hmac_compute_ipad_hash() potentially
overlapping:
In file included from include/linux/string.h:254,
from drivers/crypto/atmel-sha.c:15:
drivers/crypto/atmel-sha.c: In function 'atmel_sha_hmac_compute_ipad_hash':
include/linux/fortify-string.h:57:33: error: '__builtin_memcpy' accessing 129 or more bytes at offsets 408 and 280 overlaps 1 or more bytes at offset 408 [-Werror=restrict]
57 | #define __underlying_memcpy __builtin_memcpy
| ^
include/linux/fortify-string.h:648:9: note: in expansion of macro '__underlying_memcpy'
648 | __underlying_##op(p, q, __fortify_size); \
| ^~~~~~~~~~~~~
include/linux/fortify-string.h:693:26: note: in expansion of macro '__fortify_memcpy_chk'
693 | #define memcpy(p, q, s) __fortify_memcpy_chk(p, q, s, \
| ^~~~~~~~~~~~~~~~~~~~
drivers/crypto/atmel-sha.c:1773:9: note: in expansion of macro 'memcpy'
1773 | memcpy(hmac->opad, hmac->ipad, bs);
| ^~~~~~
The same thing happens in two more drivers that have the same logic:
drivers/crypto/chelsio/chcr_algo.c: In function 'chcr_ahash_setkey':
include/linux/fortify-string.h:57:33: error: '__builtin_memcpy' accessing 129 or more bytes at offsets 260 and 132 overlaps 1 or more bytes at offset 260 [-Werror=restrict]
drivers/crypto/bcm/cipher.c: In function 'ahash_hmac_setkey':
include/linux/fortify-string.h:57:33: error: '__builtin_memcpy' accessing between 129 and 4294967295 bytes at offsets 840 and 712 overlaps between 1 and 4294967167 bytes at offset 840 [-Werror=restrict]
I don't think it can actually happen because the size is strictly bounded
to the available block sizes, at most 128 bytes, though inlining decisions
could lead gcc to not see that.
Use the unsafe_memcpy() helper instead of memcpy(), with the only difference
being that this skips the hardening checks that produce the warning.
Suggested-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
'type' is an enum, thus cast of pointer on 64-bit compile test with W=1
causes:
exynos-rng.c:280:14: error: cast to smaller integer type 'enum exynos_prng_type' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There are cases when the interrupt status register (JRINTR) is non-zero,
even though:
1. An interrupt was generated, but it was masked OR
2. There was no interrupt generated at all
for the corresponding job ring.
1. The case when interrupt is masked (JRCFGR_LS[IMSK]=1b'1)
while other events have happened and are being accounted for, e.g.
-JRINTR[HALT]=2b'10 - input job ring underwent a flush of all on-going
jobs and processing of still-existing jobs (sitting in the ring) has been
halted
-JRINTR[HALT]=2b'01 - input job ring is currently undergoing a flush
-JRINTR[ENTER_FAIL]=1b'1 - SecMon / SNVS transitioned to FAIL MODE
It doesn't matter whether these events would assert the interrupt signal
or not, interrupt is anyhow masked.
2. The case when interrupt is not masked (JRCFGR_LS[IMSK]=1b'0), however
the events accounted for in JRINTR do not generate interrupts, e.g.:
-JRINTR[HALT]=2b'01
-JRINTR[ENTER_FAIL]=1b'1 and JRCFGR_MS[FAIL_MODE]=1b'0
Currently in these cases, when the JR interrupt handler is invoked (as a
consequence of JR sharing the interrupt line with other devices - e.g.
the two JRs on i.MX7ULP) it continues execution instead of returning
IRQ_NONE.
This could lead to situations like interrupt handler clearing JRINTR (and
thus also the JRINTR[HALT] field) while corresponding job ring is
suspended and then that job ring failing on resume path, due to expecting
JRINTR[HALT]=b'10 and reading instead JRINTR[HALT]=b'00.
Fix this by checking status of JRINTR[JRI] in the JR interrupt handler.
If JRINTR[JRI]=1b'0, there was no interrupt generated for this JR and
handler must return IRQ_NONE.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In caam_jr_enqueue, under heavy DDR load, smp_wmb() or dma_wmb()
fail to make the input ring be updated before the CAAM starts
reading it. So, CAAM will process, again, an old descriptor address
and will put it in the output ring. This will make caam_jr_dequeue()
to fail, since this old descriptor is not in the software ring.
To fix this, use wmb() which works on the full system instead of
inner/outer shareable domains.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The newly added PM operations use the deprecated SIMPLE_DEV_PM_OPS() macro,
causing a warning in some configurations:
drivers/crypto/caam/ctrl.c:828:12: error: 'caam_ctrl_resume' defined but not used [-Werror=unused-function]
828 | static int caam_ctrl_resume(struct device *dev)
| ^~~~~~~~~~~~~~~~
drivers/crypto/caam/ctrl.c:818:12: error: 'caam_ctrl_suspend' defined but not used [-Werror=unused-function]
818 | static int caam_ctrl_suspend(struct device *dev)
| ^~~~~~~~~~~~~~~~~
drivers/crypto/caam/jr.c:732:12: error: 'caam_jr_resume' defined but not used [-Werror=unused-function]
732 | static int caam_jr_resume(struct device *dev)
| ^~~~~~~~~~~~~~
drivers/crypto/caam/jr.c:687:12: error: 'caam_jr_suspend' defined but not used [-Werror=unused-function]
687 | static int caam_jr_suspend(struct device *dev)
| ^~~~~~~~~~~~~~~
Use the normal DEFINE_SIMPLE_DEV_PM_OPS() variant now, and use pm_ptr() to
completely eliminate the structure in configs without CONFIG_PM.
Fixes: 322d74752c ("crypto: caam - add power management support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since commit ce753ad154 ("platform: finally disallow IRQ0 in
platform_get_irq() and its ilk"), there is no possible for
platform_get_irq() to return 0. Use the return value
from platform_get_irq().
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use kfree_sensitive() instead of memset() and kfree().
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
stm32_hash_remove() is only called after stm32_hash_probe() succeeded. In
this case platform_set_drvdata() was called with a non-NULL data patameter.
The check for hdev being non-NULL can be dropped because hdev is never NULL
(or something bad like memory corruption happened and then the check
doesn't help any more either).
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If pm_runtime_get() (disguised as pm_runtime_resume_and_get()) fails, this
means the clk wasn't prepared and enabled. Returning early in this case
however is wrong as then the following resource frees are skipped and this
is never catched up. So do all the cleanups but clk_disable_unprepare().
Also don't emit a warning, as stm32_hash_runtime_resume() already emitted
one.
Note that the return value of stm32_hash_remove() is mostly ignored by
the device core. The only effect of returning zero instead of an error
value is to suppress another warning in platform_remove(). So return 0
even if pm_runtime_resume_and_get() failed.
Fixes: 8b4d566de6 ("crypto: stm32/hash - Add power management support")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
kzalloc() returns NULL pointer not PTR_ERR() when it fails,
so replace the IS_ERR() check with NULL pointer check.
Fixes: e22471c233 ("crypto: starfive - Add AES skcipher and aead support")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
It is possible that dma_request_chan will return EPROBE_DEFER,
which means that dd->dev is not ready yet. In this case,
dev_err(dd->dev), there will be no output. This patch fixes the bug.
Signed-off-by: Wang Ming <machel@vivo.com>
Reviewed-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for suspend and resume operation for PM in CAAM driver.
When the CAAM goes in suspend, the hardware is considered to do nothing.
On some platforms, the power of the CAAM is not turned off so it keeps
its configuration.
On other platforms, it doesn't so it is necessary to save the state of
the CAAM:
- JRs MID
- Address of input and output rings
Signed-off-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com>
Signed-off-by: Dan Douglass <dan.douglass@nxp.com>
Signed-off-by: Vipul Kumar <vipul_kumar@mentor.com>
Signed-off-by: Franck LENORMAND <franck.lenormand@nxp.com>
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The structure partid is not suitable to represent the DECO MID register.
This patch replace partid by masterid which is more appropriate.
Signed-off-by: Franck LENORMAND <franck.lenormand@nxp.com>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
On memory allocation failure, the function calling stack is already logged.
So there is no need to explicitly log an extra message.
Remove them, ans simplify some code accordingly.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use struct_size() instead of hand-writing it, when allocating a structure
with a flex array.
This is less verbose, more robust and more informative.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Adding AES skcipher and aead support to Starfive crypto module.
Skcipher modes of operation include ecb, cbc, ctr, ofb, cfb. Aead modes
include ccm and gcm.
v1->v2:
- Add include interrupt.h to fix compile error. (Herbert)
Co-developed-by: Huan Feng <huan.feng@starfivetech.com>
Signed-off-by: Huan Feng <huan.feng@starfivetech.com>
Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove the legacy device driver code for CEX2 and CEX3 cards.
The last machines which are able to handle CEX2 crypto cards
are z10 EC first available 2008 and z10 BC first available 2009.
The last machines able to handle a CEX3 crypto card are
z196 first available 2010 and z114 first available 2011.
Please note that this does not imply to drop CEX2 and CEX3
support in general. With older kernels on hardware up to the
aforementioned machine models these crypto cards will get
support by IBM.
The removal of the CEX2 and CEX3 device drivers code opens up
some simplifications, for example support for crypto cards
without rng support can be removed also.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Enable sva error interrupt event. When an error occurs on
the sva module, the device reports an abnormal interrupt to
the driver.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When both the accelerator device and SMMU are busy,
the processing time of the doorbell may be prolonged.
As a result, the doorbell may timeout, especially in the sva
scenario. Therefore, the doorbell timeout is increased.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When the system is shut down, the process is killed, but the
accelerator device does not stop executing the tasks. If the
accelerator device still accesses the memory and writes back data
to the memory after the memory is reclaimed by the system,
an NFE error may occur. Therefore, before the system is shut
down, the driver needs to stop the device and write data back
to the memory.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Before removing the driver, flush inter-function communication
work, and subsequent communication work is not processed.
This prevents communication threads from accessing released memory.
Fixes: ("crypto: hisilicon/qm - enable PF and VFs communication")
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove flag HASH_FLAGS_DMA_READY as it can put the driver in a deadlock
state.
If the DMA automatically set the DCAL bit, the interrupt indicating the
end of a computation can be raised before the DMA complete sequence.
Signed-off-by: Thomas Bourgoin <thomas.bourgoin@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If IP has MDMAT support, set or reset the bit MDMAT in Control Register.
Fixes: b56403a25a ("crypto: stm32/hash - Support Ux500 hash")
Cc: stable@vger.kernel.org
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Thomas Bourgoin <thomas.bourgoin@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When we are sending the data to HASH with the DMA, we send all the data
provided in the scatterlists of the request.
But in some cases (ex : tcrypt performances tests), we should only send
req->nbytes
When iterating through the scatterlist we verify if it is the last
scatterlist or if the number of bytes sent plus the data of the current
scatterlist is superior of the total number of bytes to hash.
Signed-off-by: Thomas Bourgoin <thomas.bourgoin@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
We were reading the length of the scatterlist sg after copying value of
tsg inside.
So we are using the size of the previous scatterlist and for the first
one we are using an unitialised value.
Fix this by copying tsg in sg[0] before reading the size.
Fixes : 8a1012d3f2 ("crypto: stm32 - Support for STM32 HASH module")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Bourgoin <thomas.bourgoin@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Commit "crypto: stm32 - Fix empty message processing" remove the use of
the argument bufcnt in stm32_hash_write_ctrl.
Hence, we can remove it from the function prototype and simplify the
function declaration.
Signed-off-by: Thomas Bourgoin <thomas.bourgoin@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add the all SHA-2 (up to 512) and SHA-3 algorithm support.
Update compatible table to add stm32mp13.
Signed-off-by: Thomas Bourgoin <thomas.bourgoin@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The private key of the curve key size generated by stdrng, which maybe
not less than n. Therefore, the private key with the curve key size
minus 1 is generated to ensure that the private key is less than n.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
