Commit Graph

2521 Commits

Author SHA1 Message Date
Kent Overstreet
2b69987be5 sched: Add task_struct->faults_disabled_mapping
There has been a long standing page cache coherence bug with direct IO.
This provides part of a mechanism to fix it, currently just used by
bcachefs but potentially worth promoting to the VFS.

Direct IO evicts the range of the pagecache being read or written to.

For reads, we need dirty pages to be written to disk, so that the read
doesn't return stale data. For writes, we need to evict that range of
the pagecache so that it's not stale after the write completes.

However, without a locking mechanism to prevent those pages from being
re-added to the pagecache - by a buffered read or page fault - page
cache inconsistency is still possible.

This isn't necessarily just an issue for userspace when they're playing
games; filesystems may hang arbitrary state off the pagecache, and so
page cache inconsistency may cause real filesystem bugs, depending on
the filesystem. This is less of an issue for iomap based filesystems,
but e.g. buffer heads caches disk block mappings (!) and attaches them
to the pagecache, and bcachefs attaches disk reservations to pagecache
pages.

This issue has been hard to fix, because
 - we need to add a lock (henceforth called pagecache_add_lock), which
   would be held for the duration of the direct IO
 - page faults add pages to the page cache, thus need to take the same
   lock
 - dio -> gup -> page fault thus can deadlock

And we cannot enforce a lock ordering with this lock, since userspace
will be controlling the lock ordering (via the fd and buffer arguments
to direct IOs), so we need a different method of deadlock avoidance.

We need to tell the page fault handler that we're already holding a
pagecache_add_lock, and since plumbing it through the entire gup() path
would be highly impractical this adds a field to task_struct.

Then the full method is:
 - in the dio path, when we first take the pagecache_add_lock, note the
   mapping in the current task_struct
 - in the page fault handler, if faults_disabled_mapping is set, we
   check if it's the same mapping as the one we're taking a page fault
   for, and if so return an error.

   Then we check lock ordering: if there's a lock ordering violation and
   trylock fails, we'll have to cycle the locks and return an error that
   tells the DIO path to retry: faults_disabled_mapping is also used for
   signalling "locks were dropped, please retry".

Also relevant to this patch: mapping->invalidate_lock.
mapping->invalidate_lock provides most of the required semantics - it's
used by truncate/fallocate to block pages being added to the pagecache.
However, since it's a rwsem, direct IOs would need to take the write
side in order to block page cache adds, and would then be exclusive with
each other - we'll need a new type of lock to pair with this approach.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Jan Kara <jack@suse.cz>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: linux-fsdevel@vger.kernel.org
Cc: Andreas Grünbacher <andreas.gruenbacher@gmail.com>
2023-09-11 23:59:46 -04:00
Linus Torvalds
bd30fe6a7d workqueue: Changes for v6.6
* Unbound workqueues now support more flexible affinity scopes. The default
   behavior is to soft-affine according to last level cache boundaries. A
   work item queued from a given LLC is executed by a worker running on the
   same LLC but the worker may be moved across cache boundaries as the
   scheduler sees fit. On machines which multiple L3 caches, which are
   becoming more popular along with chiplet designs, this improves cache
   locality while not harming work conservation too much.
 
   Unbound workqueues are now also a lot more flexible in terms of execution
   affinity. Differeing levels of affinity scopes are supported and both the
   default and per-workqueue affinity settings can be modified dynamically.
   This should help working around amny of sub-optimal behaviors observed
   recently with asymmetric ARM CPUs.
 
   This involved signficant restructuring of workqueue code. Nothing was
   reported yet but there's some risk of subtle regressions. Should keep an
   eye out.
 
 * Rescuer workers now has more identifiable comms.
 
 * workqueue.unbound_cpus added so that CPUs which can be used by workqueue
   can be constrained early during boot.
 
 * Now that all the in-tree users have been flushed out, trigger warning if
   system-wide workqueues are flushed.
 
 * One pull commit from for-6.5-fixes to avoid cascading conflicts in the
   affinity scope patchset.
 -----BEGIN PGP SIGNATURE-----
 
 iIQEABYIACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZPERlQ4cdGpAa2VybmVs
 Lm9yZwAKCRCxYfJx3gVYGVqQAPwIOy9tWY5jFAmMuIyH6wV50hbmfxCc2n5xhQNr
 5HoyGgEA8lw1W7afDCIPiQVA7AYsu8dhwuNSOcRCJxhrrn4XsA0=
 =g/Uu
 -----END PGP SIGNATURE-----

Merge tag 'wq-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq

Pull workqueue updates from Tejun Heo:

 - Unbound workqueues now support more flexible affinity scopes.

   The default behavior is to soft-affine according to last level cache
   boundaries. A work item queued from a given LLC is executed by a
   worker running on the same LLC but the worker may be moved across
   cache boundaries as the scheduler sees fit. On machines which
   multiple L3 caches, which are becoming more popular along with
   chiplet designs, this improves cache locality while not harming work
   conservation too much.

   Unbound workqueues are now also a lot more flexible in terms of
   execution affinity. Differeing levels of affinity scopes are
   supported and both the default and per-workqueue affinity settings
   can be modified dynamically. This should help working around amny of
   sub-optimal behaviors observed recently with asymmetric ARM CPUs.

   This involved signficant restructuring of workqueue code. Nothing was
   reported yet but there's some risk of subtle regressions. Should keep
   an eye out.

 - Rescuer workers now has more identifiable comms.

 - workqueue.unbound_cpus added so that CPUs which can be used by
   workqueue can be constrained early during boot.

 - Now that all the in-tree users have been flushed out, trigger warning
   if system-wide workqueues are flushed.

* tag 'wq-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (31 commits)
  workqueue: fix data race with the pwq->stats[] increment
  workqueue: Rename rescuer kworker
  workqueue: Make default affinity_scope dynamically updatable
  workqueue: Add "Affinity Scopes and Performance" section to documentation
  workqueue: Implement non-strict affinity scope for unbound workqueues
  workqueue: Add workqueue_attrs->__pod_cpumask
  workqueue: Factor out need_more_worker() check and worker wake-up
  workqueue: Factor out work to worker assignment and collision handling
  workqueue: Add multiple affinity scopes and interface to select them
  workqueue: Modularize wq_pod_type initialization
  workqueue: Add tools/workqueue/wq_dump.py which prints out workqueue configuration
  workqueue: Generalize unbound CPU pods
  workqueue: Factor out clearing of workqueue-only attrs fields
  workqueue: Factor out actual cpumask calculation to reduce subtlety in wq_update_pod()
  workqueue: Initialize unbound CPU pods later in the boot
  workqueue: Move wq_pod_init() below workqueue_init()
  workqueue: Rename NUMA related names to use pod instead
  workqueue: Rename workqueue_attrs->no_numa to ->ordered
  workqueue: Make unbound workqueues to use per-cpu pool_workqueues
  workqueue: Call wq_update_unbound_numa() on all CPUs in NUMA node on CPU hotplug
  ...
2023-09-01 16:06:32 -07:00
Linus Torvalds
d68b4b6f30 - An extensive rework of kexec and crash Kconfig from Eric DeVolder
("refactor Kconfig to consolidate KEXEC and CRASH options").
 
 - kernel.h slimming work from Andy Shevchenko ("kernel.h: Split out a
   couple of macros to args.h").
 
 - gdb feature work from Kuan-Ying Lee ("Add GDB memory helper
   commands").
 
 - vsprintf inclusion rationalization from Andy Shevchenko
   ("lib/vsprintf: Rework header inclusions").
 
 - Switch the handling of kdump from a udev scheme to in-kernel handling,
   by Eric DeVolder ("crash: Kernel handling of CPU and memory hot
   un/plug").
 
 - Many singleton patches to various parts of the tree
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZO2GpAAKCRDdBJ7gKXxA
 juW3AQD1moHzlSN6x9I3tjm5TWWNYFoFL8af7wXDJspp/DWH/AD/TO0XlWWhhbYy
 QHy7lL0Syha38kKLMXTM+bN6YQHi9AU=
 =WJQa
 -----END PGP SIGNATURE-----

Merge tag 'mm-nonmm-stable-2023-08-28-22-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull non-MM updates from Andrew Morton:

 - An extensive rework of kexec and crash Kconfig from Eric DeVolder
   ("refactor Kconfig to consolidate KEXEC and CRASH options")

 - kernel.h slimming work from Andy Shevchenko ("kernel.h: Split out a
   couple of macros to args.h")

 - gdb feature work from Kuan-Ying Lee ("Add GDB memory helper
   commands")

 - vsprintf inclusion rationalization from Andy Shevchenko
   ("lib/vsprintf: Rework header inclusions")

 - Switch the handling of kdump from a udev scheme to in-kernel
   handling, by Eric DeVolder ("crash: Kernel handling of CPU and memory
   hot un/plug")

 - Many singleton patches to various parts of the tree

* tag 'mm-nonmm-stable-2023-08-28-22-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (81 commits)
  document while_each_thread(), change first_tid() to use for_each_thread()
  drivers/char/mem.c: shrink character device's devlist[] array
  x86/crash: optimize CPU changes
  crash: change crash_prepare_elf64_headers() to for_each_possible_cpu()
  crash: hotplug support for kexec_load()
  x86/crash: add x86 crash hotplug support
  crash: memory and CPU hotplug sysfs attributes
  kexec: exclude elfcorehdr from the segment digest
  crash: add generic infrastructure for crash hotplug support
  crash: move a few code bits to setup support of crash hotplug
  kstrtox: consistently use _tolower()
  kill do_each_thread()
  nilfs2: fix WARNING in mark_buffer_dirty due to discarded buffer reuse
  scripts/bloat-o-meter: count weak symbol sizes
  treewide: drop CONFIG_EMBEDDED
  lockdep: fix static memory detection even more
  lib/vsprintf: declare no_hash_pointers in sprintf.h
  lib/vsprintf: split out sprintf() and friends
  kernel/fork: stop playing lockless games for exe_file replacement
  adfs: delete unused "union adfs_dirtail" definition
  ...
2023-08-29 14:53:51 -07:00
Linus Torvalds
b96a3e9142 - Some swap cleanups from Ma Wupeng ("fix WARN_ON in add_to_avail_list")
- Peter Xu has a series (mm/gup: Unify hugetlb, speed up thp") which
   reduces the special-case code for handling hugetlb pages in GUP.  It
   also speeds up GUP handling of transparent hugepages.
 
 - Peng Zhang provides some maple tree speedups ("Optimize the fast path
   of mas_store()").
 
 - Sergey Senozhatsky has improved te performance of zsmalloc during
   compaction (zsmalloc: small compaction improvements").
 
 - Domenico Cerasuolo has developed additional selftest code for zswap
   ("selftests: cgroup: add zswap test program").
 
 - xu xin has doe some work on KSM's handling of zero pages.  These
   changes are mainly to enable the user to better understand the
   effectiveness of KSM's treatment of zero pages ("ksm: support tracking
   KSM-placed zero-pages").
 
 - Jeff Xu has fixes the behaviour of memfd's
   MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED sysctl ("mm/memfd: fix sysctl
   MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED").
 
 - David Howells has fixed an fscache optimization ("mm, netfs, fscache:
   Stop read optimisation when folio removed from pagecache").
 
 - Axel Rasmussen has given userfaultfd the ability to simulate memory
   poisoning ("add UFFDIO_POISON to simulate memory poisoning with UFFD").
 
 - Miaohe Lin has contributed some routine maintenance work on the
   memory-failure code ("mm: memory-failure: remove unneeded PageHuge()
   check").
 
 - Peng Zhang has contributed some maintenance work on the maple tree
   code ("Improve the validation for maple tree and some cleanup").
 
 - Hugh Dickins has optimized the collapsing of shmem or file pages into
   THPs ("mm: free retracted page table by RCU").
 
 - Jiaqi Yan has a patch series which permits us to use the healthy
   subpages within a hardware poisoned huge page for general purposes
   ("Improve hugetlbfs read on HWPOISON hugepages").
 
 - Kemeng Shi has done some maintenance work on the pagetable-check code
   ("Remove unused parameters in page_table_check").
 
 - More folioification work from Matthew Wilcox ("More filesystem folio
   conversions for 6.6"), ("Followup folio conversions for zswap").  And
   from ZhangPeng ("Convert several functions in page_io.c to use a
   folio").
 
 - page_ext cleanups from Kemeng Shi ("minor cleanups for page_ext").
 
 - Baoquan He has converted some architectures to use the GENERIC_IOREMAP
   ioremap()/iounmap() code ("mm: ioremap: Convert architectures to take
   GENERIC_IOREMAP way").
 
 - Anshuman Khandual has optimized arm64 tlb shootdown ("arm64: support
   batched/deferred tlb shootdown during page reclamation/migration").
 
 - Better maple tree lockdep checking from Liam Howlett ("More strict
   maple tree lockdep").  Liam also developed some efficiency improvements
   ("Reduce preallocations for maple tree").
 
 - Cleanup and optimization to the secondary IOMMU TLB invalidation, from
   Alistair Popple ("Invalidate secondary IOMMU TLB on permission
   upgrade").
 
 - Ryan Roberts fixes some arm64 MM selftest issues ("selftests/mm fixes
   for arm64").
 
 - Kemeng Shi provides some maintenance work on the compaction code ("Two
   minor cleanups for compaction").
 
 - Some reduction in mmap_lock pressure from Matthew Wilcox ("Handle most
   file-backed faults under the VMA lock").
 
 - Aneesh Kumar contributes code to use the vmemmap optimization for DAX
   on ppc64, under some circumstances ("Add support for DAX vmemmap
   optimization for ppc64").
 
 - page-ext cleanups from Kemeng Shi ("add page_ext_data to get client
   data in page_ext"), ("minor cleanups to page_ext header").
 
 - Some zswap cleanups from Johannes Weiner ("mm: zswap: three
   cleanups").
 
 - kmsan cleanups from ZhangPeng ("minor cleanups for kmsan").
 
 - VMA handling cleanups from Kefeng Wang ("mm: convert to
   vma_is_initial_heap/stack()").
 
 - DAMON feature work from SeongJae Park ("mm/damon/sysfs-schemes:
   implement DAMOS tried total bytes file"), ("Extend DAMOS filters for
   address ranges and DAMON monitoring targets").
 
 - Compaction work from Kemeng Shi ("Fixes and cleanups to compaction").
 
 - Liam Howlett has improved the maple tree node replacement code
   ("maple_tree: Change replacement strategy").
 
 - ZhangPeng has a general code cleanup - use the K() macro more widely
   ("cleanup with helper macro K()").
 
 - Aneesh Kumar brings memmap-on-memory to ppc64 ("Add support for memmap
   on memory feature on ppc64").
 
 - pagealloc cleanups from Kemeng Shi ("Two minor cleanups for pcp list
   in page_alloc"), ("Two minor cleanups for get pageblock migratetype").
 
 - Vishal Moola introduces a memory descriptor for page table tracking,
   "struct ptdesc" ("Split ptdesc from struct page").
 
 - memfd selftest maintenance work from Aleksa Sarai ("memfd: cleanups
   for vm.memfd_noexec").
 
 - MM include file rationalization from Hugh Dickins ("arch: include
   asm/cacheflush.h in asm/hugetlb.h").
 
 - THP debug output fixes from Hugh Dickins ("mm,thp: fix sloppy text
   output").
 
 - kmemleak improvements from Xiaolei Wang ("mm/kmemleak: use
   object_cache instead of kmemleak_initialized").
 
 - More folio-related cleanups from Matthew Wilcox ("Remove _folio_dtor
   and _folio_order").
 
 - A VMA locking scalability improvement from Suren Baghdasaryan
   ("Per-VMA lock support for swap and userfaults").
 
 - pagetable handling cleanups from Matthew Wilcox ("New page table range
   API").
 
 - A batch of swap/thp cleanups from David Hildenbrand ("mm/swap: stop
   using page->private on tail pages for THP_SWAP + cleanups").
 
 - Cleanups and speedups to the hugetlb fault handling from Matthew
   Wilcox ("Change calling convention for ->huge_fault").
 
 - Matthew Wilcox has also done some maintenance work on the MM subsystem
   documentation ("Improve mm documentation").
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZO1JUQAKCRDdBJ7gKXxA
 jrMwAP47r/fS8vAVT3zp/7fXmxaJYTK27CTAM881Gw1SDhFM/wEAv8o84mDenCg6
 Nfio7afS1ncD+hPYT8947UnLxTgn+ww=
 =Afws
 -----END PGP SIGNATURE-----

Merge tag 'mm-stable-2023-08-28-18-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull MM updates from Andrew Morton:

 - Some swap cleanups from Ma Wupeng ("fix WARN_ON in
   add_to_avail_list")

 - Peter Xu has a series (mm/gup: Unify hugetlb, speed up thp") which
   reduces the special-case code for handling hugetlb pages in GUP. It
   also speeds up GUP handling of transparent hugepages.

 - Peng Zhang provides some maple tree speedups ("Optimize the fast path
   of mas_store()").

 - Sergey Senozhatsky has improved te performance of zsmalloc during
   compaction (zsmalloc: small compaction improvements").

 - Domenico Cerasuolo has developed additional selftest code for zswap
   ("selftests: cgroup: add zswap test program").

 - xu xin has doe some work on KSM's handling of zero pages. These
   changes are mainly to enable the user to better understand the
   effectiveness of KSM's treatment of zero pages ("ksm: support
   tracking KSM-placed zero-pages").

 - Jeff Xu has fixes the behaviour of memfd's
   MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED sysctl ("mm/memfd: fix sysctl
   MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED").

 - David Howells has fixed an fscache optimization ("mm, netfs, fscache:
   Stop read optimisation when folio removed from pagecache").

 - Axel Rasmussen has given userfaultfd the ability to simulate memory
   poisoning ("add UFFDIO_POISON to simulate memory poisoning with
   UFFD").

 - Miaohe Lin has contributed some routine maintenance work on the
   memory-failure code ("mm: memory-failure: remove unneeded PageHuge()
   check").

 - Peng Zhang has contributed some maintenance work on the maple tree
   code ("Improve the validation for maple tree and some cleanup").

 - Hugh Dickins has optimized the collapsing of shmem or file pages into
   THPs ("mm: free retracted page table by RCU").

 - Jiaqi Yan has a patch series which permits us to use the healthy
   subpages within a hardware poisoned huge page for general purposes
   ("Improve hugetlbfs read on HWPOISON hugepages").

 - Kemeng Shi has done some maintenance work on the pagetable-check code
   ("Remove unused parameters in page_table_check").

 - More folioification work from Matthew Wilcox ("More filesystem folio
   conversions for 6.6"), ("Followup folio conversions for zswap"). And
   from ZhangPeng ("Convert several functions in page_io.c to use a
   folio").

 - page_ext cleanups from Kemeng Shi ("minor cleanups for page_ext").

 - Baoquan He has converted some architectures to use the
   GENERIC_IOREMAP ioremap()/iounmap() code ("mm: ioremap: Convert
   architectures to take GENERIC_IOREMAP way").

 - Anshuman Khandual has optimized arm64 tlb shootdown ("arm64: support
   batched/deferred tlb shootdown during page reclamation/migration").

 - Better maple tree lockdep checking from Liam Howlett ("More strict
   maple tree lockdep"). Liam also developed some efficiency
   improvements ("Reduce preallocations for maple tree").

 - Cleanup and optimization to the secondary IOMMU TLB invalidation,
   from Alistair Popple ("Invalidate secondary IOMMU TLB on permission
   upgrade").

 - Ryan Roberts fixes some arm64 MM selftest issues ("selftests/mm fixes
   for arm64").

 - Kemeng Shi provides some maintenance work on the compaction code
   ("Two minor cleanups for compaction").

 - Some reduction in mmap_lock pressure from Matthew Wilcox ("Handle
   most file-backed faults under the VMA lock").

 - Aneesh Kumar contributes code to use the vmemmap optimization for DAX
   on ppc64, under some circumstances ("Add support for DAX vmemmap
   optimization for ppc64").

 - page-ext cleanups from Kemeng Shi ("add page_ext_data to get client
   data in page_ext"), ("minor cleanups to page_ext header").

 - Some zswap cleanups from Johannes Weiner ("mm: zswap: three
   cleanups").

 - kmsan cleanups from ZhangPeng ("minor cleanups for kmsan").

 - VMA handling cleanups from Kefeng Wang ("mm: convert to
   vma_is_initial_heap/stack()").

 - DAMON feature work from SeongJae Park ("mm/damon/sysfs-schemes:
   implement DAMOS tried total bytes file"), ("Extend DAMOS filters for
   address ranges and DAMON monitoring targets").

 - Compaction work from Kemeng Shi ("Fixes and cleanups to compaction").

 - Liam Howlett has improved the maple tree node replacement code
   ("maple_tree: Change replacement strategy").

 - ZhangPeng has a general code cleanup - use the K() macro more widely
   ("cleanup with helper macro K()").

 - Aneesh Kumar brings memmap-on-memory to ppc64 ("Add support for
   memmap on memory feature on ppc64").

 - pagealloc cleanups from Kemeng Shi ("Two minor cleanups for pcp list
   in page_alloc"), ("Two minor cleanups for get pageblock
   migratetype").

 - Vishal Moola introduces a memory descriptor for page table tracking,
   "struct ptdesc" ("Split ptdesc from struct page").

 - memfd selftest maintenance work from Aleksa Sarai ("memfd: cleanups
   for vm.memfd_noexec").

 - MM include file rationalization from Hugh Dickins ("arch: include
   asm/cacheflush.h in asm/hugetlb.h").

 - THP debug output fixes from Hugh Dickins ("mm,thp: fix sloppy text
   output").

 - kmemleak improvements from Xiaolei Wang ("mm/kmemleak: use
   object_cache instead of kmemleak_initialized").

 - More folio-related cleanups from Matthew Wilcox ("Remove _folio_dtor
   and _folio_order").

 - A VMA locking scalability improvement from Suren Baghdasaryan
   ("Per-VMA lock support for swap and userfaults").

 - pagetable handling cleanups from Matthew Wilcox ("New page table
   range API").

 - A batch of swap/thp cleanups from David Hildenbrand ("mm/swap: stop
   using page->private on tail pages for THP_SWAP + cleanups").

 - Cleanups and speedups to the hugetlb fault handling from Matthew
   Wilcox ("Change calling convention for ->huge_fault").

 - Matthew Wilcox has also done some maintenance work on the MM
   subsystem documentation ("Improve mm documentation").

* tag 'mm-stable-2023-08-28-18-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (489 commits)
  maple_tree: shrink struct maple_tree
  maple_tree: clean up mas_wr_append()
  secretmem: convert page_is_secretmem() to folio_is_secretmem()
  nios2: fix flush_dcache_page() for usage from irq context
  hugetlb: add documentation for vma_kernel_pagesize()
  mm: add orphaned kernel-doc to the rst files.
  mm: fix clean_record_shared_mapping_range kernel-doc
  mm: fix get_mctgt_type() kernel-doc
  mm: fix kernel-doc warning from tlb_flush_rmaps()
  mm: remove enum page_entry_size
  mm: allow ->huge_fault() to be called without the mmap_lock held
  mm: move PMD_ORDER to pgtable.h
  mm: remove checks for pte_index
  memcg: remove duplication detection for mem_cgroup_uncharge_swap
  mm/huge_memory: work on folio->swap instead of page->private when splitting folio
  mm/swap: inline folio_set_swap_entry() and folio_swap_entry()
  mm/swap: use dedicated entry for swap in folio
  mm/swap: stop using page->private on tail pages for THP_SWAP
  selftests/mm: fix WARNING comparing pointer to 0
  selftests: cgroup: fix test_kmem_memcg_deletion kernel mem check
  ...
2023-08-29 14:25:26 -07:00
Linus Torvalds
3ca9a836ff Scheduler changes for v6.6:
- The biggest change is introduction of a new iteration of the
   SCHED_FAIR interactivity code: the EEVDF ("Earliest Eligible Virtual
   Deadline First") scheduler.
 
   EEVDF too is a virtual-time scheduler, with two parameters (weight
   and relative deadline), compared to CFS that had weight only.
   It completely reworks the base scheduler: placement, preemption,
   picking -- everything.
 
   LWN.net, as usual, has a terrific writeup about EEVDF:
 
      https://lwn.net/Articles/925371/
 
   Preemption (both tick and wakeup) is driven by testing against
   a fresh pick. Because the tree is now effectively an interval
   tree, and the selection is no longer the 'leftmost' task,
   over-scheduling is less of a problem. A lot of the CFS
   heuristics are removed or replaced by more natural latency-space
   parameters & constructs.
 
   In terms of expected performance regressions: we'll and can fix
   everything where a 'good' workload misbehaves with the new scheduler,
   but EEVDF inevitably changes workload scheduling in a binary fashion,
   hopefully for the better in the overwhelming majority of cases,
   but in some cases it won't, especially in adversarial loads that
   got lucky with the previous code, such as some variants of hackbench.
   We are trying hard to err on the side of fixing all performance
   regressions, but we expect some inevitable post-release iterations
   of that process.
 
 - Improve load-balancing on hybrid x86 systems: enable cluster
   scheduling (again).
 
 - Improve & fix bandwidth-scheduling on nohz systems.
 
 - Improve bandwidth-throttling.
 
 - Use lock guards to simplify and de-goto-ify control flow.
 
 - Misc improvements, cleanups and fixes.
 
 Signed-off-by: Ingo Molnar <mingo@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmTtDOgRHG1pbmdvQGtl
 cm5lbC5vcmcACgkQEnMQ0APhK1iS4g//b9yewVW9OPxetKoN8zIJA0TjFYuuOVHK
 BlCJi5dbzXeCTrtENI65BRA7kPbTQ3AjwLRQ2BallAZ4dJceK0RhlZJvcrMNsm4e
 Adcpoch/FbqPKCrtAJQY04Ln1B244n/KyVifYett9220dMgTFQGJJYxrTc2G2+Kp
 F44vdUHzRczIE+KeOgBild1CwfKv5Zn5xgaXgtuoPLZtWBE0C1fSSzbK/PTINcUx
 bS4NVxK0CpOqSiNjnugV8KsYb71/0U6IgShBVjfHsrlBYigOH2NbVTH5xyjF8f83
 WxiGstlhxj+N6Kv4L6FOJIAr2BIggH82j3FaPACmv4c8pzEoBBbvlAJkfinLEgbn
 Povg3OF2t6uZ8NoHjeu3WxOjBsphbpkFz7H5nno1ibXSIR/JyUH5MdBPSx93QITB
 QoUKQpr/L8zWauWDOEzSaJjEsZbl8rkcIVq5Bk0bR3qn2xkZsIeVte+vCEu3+tBc
 b4JOZjq7AuPDqPnsBLvuyiFZ7zwsAfm+pOD5UF3/zbLjPn1N/7wTNQZ29zjc04jl
 SifpCZGgF1KlG8m8wNTlSfVvq0ksppCzJt+C6VFuejZ191IGpirQHn4Vp0sluMhC
 WRzXhb7v37Bq5JY10GMfeKb/jAiRs68kozhzqVPsBSAPS6I6jJssONgedq+LbQdC
 tFsmE9n09do=
 =XtCD
 -----END PGP SIGNATURE-----

Merge tag 'sched-core-2023-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull scheduler updates from Ingo Molnar:

 - The biggest change is introduction of a new iteration of the
   SCHED_FAIR interactivity code: the EEVDF ("Earliest Eligible Virtual
   Deadline First") scheduler

   EEVDF too is a virtual-time scheduler, with two parameters (weight
   and relative deadline), compared to CFS that had weight only. It
   completely reworks the base scheduler: placement, preemption, picking
   -- everything

   LWN.net, as usual, has a terrific writeup about EEVDF:

      https://lwn.net/Articles/925371/

   Preemption (both tick and wakeup) is driven by testing against a
   fresh pick. Because the tree is now effectively an interval tree, and
   the selection is no longer the 'leftmost' task, over-scheduling is
   less of a problem. A lot of the CFS heuristics are removed or
   replaced by more natural latency-space parameters & constructs

   In terms of expected performance regressions: we will and can fix
   everything where a 'good' workload misbehaves with the new scheduler,
   but EEVDF inevitably changes workload scheduling in a binary fashion,
   hopefully for the better in the overwhelming majority of cases, but
   in some cases it won't, especially in adversarial loads that got
   lucky with the previous code, such as some variants of hackbench. We
   are trying hard to err on the side of fixing all performance
   regressions, but we expect some inevitable post-release iterations of
   that process

 - Improve load-balancing on hybrid x86 systems: enable cluster
   scheduling (again)

 - Improve & fix bandwidth-scheduling on nohz systems

 - Improve bandwidth-throttling

 - Use lock guards to simplify and de-goto-ify control flow

 - Misc improvements, cleanups and fixes

* tag 'sched-core-2023-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (43 commits)
  sched/eevdf/doc: Modify the documented knob to base_slice_ns as well
  sched/eevdf: Curb wakeup-preemption
  sched: Simplify sched_core_cpu_{starting,deactivate}()
  sched: Simplify try_steal_cookie()
  sched: Simplify sched_tick_remote()
  sched: Simplify sched_exec()
  sched: Simplify ttwu()
  sched: Simplify wake_up_if_idle()
  sched: Simplify: migrate_swap_stop()
  sched: Simplify sysctl_sched_uclamp_handler()
  sched: Simplify get_nohz_timer_target()
  sched/rt: sysctl_sched_rr_timeslice show default timeslice after reset
  sched/rt: Fix sysctl_sched_rr_timeslice intial value
  sched/fair: Block nohz tick_stop when cfs bandwidth in use
  sched, cgroup: Restore meaning to hierarchical_quota
  MAINTAINERS: Add Peter explicitly to the psi section
  sched/psi: Select KERNFS as needed
  sched/topology: Align group flags when removing degenerate domain
  sched/fair: remove util_est boosting
  sched/fair: Propagate enqueue flags into place_entity()
  ...
2023-08-28 16:43:39 -07:00
Randy Dunlap
ef815d2cba treewide: drop CONFIG_EMBEDDED
There is only one Kconfig user of CONFIG_EMBEDDED and it can be switched
to EXPERT or "if !ARCH_MULTIPLATFORM" (suggested by Arnd).

Link: https://lkml.kernel.org/r/20230816055010.31534-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>	[RISC-V]
Acked-by: Greg Ungerer <gerg@linux-m68k.org>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>	[powerpc]
Cc: Russell King <linux@armlinux.org.uk>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Brian Cain <bcain@quicinc.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-21 13:46:25 -07:00
Eric DeVolder
89cde45591 kexec: consolidate kexec and crash options into kernel/Kconfig.kexec
Patch series "refactor Kconfig to consolidate KEXEC and CRASH options", v6.

The Kconfig is refactored to consolidate KEXEC and CRASH options from
various arch/<arch>/Kconfig files into new file kernel/Kconfig.kexec.

The Kconfig.kexec is now a submenu titled "Kexec and crash features"
located under "General Setup".

The following options are impacted:

 - KEXEC
 - KEXEC_FILE
 - KEXEC_SIG
 - KEXEC_SIG_FORCE
 - KEXEC_IMAGE_VERIFY_SIG
 - KEXEC_BZIMAGE_VERIFY_SIG
 - KEXEC_JUMP
 - CRASH_DUMP

Over time, these options have been copied between Kconfig files and
are very similar to one another, but with slight differences.

The following architectures are impacted by the refactor (because of
use of one or more KEXEC/CRASH options):

 - arm
 - arm64
 - ia64
 - loongarch
 - m68k
 - mips
 - parisc
 - powerpc
 - riscv
 - s390
 - sh
 - x86 

More information:

In the patch series "crash: Kernel handling of CPU and memory hot
un/plug"

 https://lore.kernel.org/lkml/20230503224145.7405-1-eric.devolder@oracle.com/

the new kernel feature introduces the config option CRASH_HOTPLUG.

In reviewing, Thomas Gleixner requested that the new config option
not be placed in x86 Kconfig. Rather the option needs a generic/common
home. To Thomas' point, the KEXEC and CRASH options have largely been
duplicated in the various arch/<arch>/Kconfig files, with minor
differences. This kind of proliferation is to be avoid/stopped.

 https://lore.kernel.org/lkml/875y91yv63.ffs@tglx/

To that end, I have refactored the arch Kconfigs so as to consolidate
the various KEXEC and CRASH options. Generally speaking, this work has
the following themes:

- KEXEC and CRASH options are moved into new file kernel/Kconfig.kexec
  - These items from arch/Kconfig:
      CRASH_CORE KEXEC_CORE KEXEC_ELF HAVE_IMA_KEXEC
  - These items from arch/x86/Kconfig form the common options:
      KEXEC KEXEC_FILE KEXEC_SIG KEXEC_SIG_FORCE
      KEXEC_BZIMAGE_VERIFY_SIG KEXEC_JUMP CRASH_DUMP
  - These items from arch/arm64/Kconfig form the common options:
      KEXEC_IMAGE_VERIFY_SIG
  - The crash hotplug series appends CRASH_HOTPLUG to Kconfig.kexec
- The Kconfig.kexec is now a submenu titled "Kexec and crash features"
  and is now listed in "General Setup" submenu from init/Kconfig.
- To control the common options, each has a new ARCH_SUPPORTS_<option>
  option. These gateway options determine whether the common options
  options are valid for the architecture.
- To account for the slight differences in the original architecture
  coding of the common options, each now has a corresponding
  ARCH_SELECTS_<option> which are used to elicit the same side effects
  as the original arch/<arch>/Kconfig files for KEXEC and CRASH options.

An example, 'make menuconfig' illustrating the submenu:

  > General setup > Kexec and crash features
  [*] Enable kexec system call
  [*] Enable kexec file based system call
  [*]   Verify kernel signature during kexec_file_load() syscall
  [ ]     Require a valid signature in kexec_file_load() syscall
  [ ]     Enable bzImage signature verification support
  [*] kexec jump
  [*] kernel crash dumps
  [*]   Update the crash elfcorehdr on system configuration changes

In the process of consolidating the common options, I encountered
slight differences in the coding of these options in several of the
architectures. As a result, I settled on the following solution:

- Each of the common options has a 'depends on ARCH_SUPPORTS_<option>'
  statement. For example, the KEXEC_FILE option has a 'depends on
  ARCH_SUPPORTS_KEXEC_FILE' statement.

  This approach is needed on all common options so as to prevent
  options from appearing for architectures which previously did
  not allow/enable them. For example, arm supports KEXEC but not
  KEXEC_FILE. The arch/arm/Kconfig does not provide
  ARCH_SUPPORTS_KEXEC_FILE and so KEXEC_FILE and related options
  are not available to arm.

- The boolean ARCH_SUPPORTS_<option> in effect allows the arch to
  determine when the feature is allowed.  Archs which don't have the
  feature simply do not provide the corresponding ARCH_SUPPORTS_<option>.
  For each arch, where there previously were KEXEC and/or CRASH
  options, these have been replaced with the corresponding boolean
  ARCH_SUPPORTS_<option>, and an appropriate def_bool statement.

  For example, if the arch supports KEXEC_FILE, then the
  ARCH_SUPPORTS_KEXEC_FILE simply has a 'def_bool y'. This permits
  the KEXEC_FILE option to be available.

  If the arch has a 'depends on' statement in its original coding
  of the option, then that expression becomes part of the def_bool
  expression. For example, arm64 had:

  config KEXEC
    depends on PM_SLEEP_SMP

  and in this solution, this converts to:

  config ARCH_SUPPORTS_KEXEC
    def_bool PM_SLEEP_SMP


- In order to account for the architecture differences in the
  coding for the common options, the ARCH_SELECTS_<option> in the
  arch/<arch>/Kconfig is used. This option has a 'depends on
  <option>' statement to couple it to the main option, and from
  there can insert the differences from the common option and the
  arch original coding of that option.

  For example, a few archs enable CRYPTO and CRYTPO_SHA256 for
  KEXEC_FILE. These require a ARCH_SELECTS_KEXEC_FILE and
  'select CRYPTO' and 'select CRYPTO_SHA256' statements.

Illustrating the option relationships:

For each of the common KEXEC and CRASH options:
 ARCH_SUPPORTS_<option> <- <option> <- ARCH_SELECTS_<option>

 <option>                   # in Kconfig.kexec
 ARCH_SUPPORTS_<option>     # in arch/<arch>/Kconfig, as needed
 ARCH_SELECTS_<option>      # in arch/<arch>/Kconfig, as needed


For example, KEXEC:
 ARCH_SUPPORTS_KEXEC <- KEXEC <- ARCH_SELECTS_KEXEC

 KEXEC                      # in Kconfig.kexec
 ARCH_SUPPORTS_KEXEC        # in arch/<arch>/Kconfig, as needed
 ARCH_SELECTS_KEXEC         # in arch/<arch>/Kconfig, as needed


To summarize, the ARCH_SUPPORTS_<option> permits the <option> to be
enabled, and the ARCH_SELECTS_<option> handles side effects (ie.
select statements).

Examples:
A few examples to show the new strategy in action:

===== x86 (minus the help section) =====
Original:
 config KEXEC
    bool "kexec system call"
    select KEXEC_CORE

 config KEXEC_FILE
    bool "kexec file based system call"
    select KEXEC_CORE
    select HAVE_IMA_KEXEC if IMA
    depends on X86_64
    depends on CRYPTO=y
    depends on CRYPTO_SHA256=y

 config ARCH_HAS_KEXEC_PURGATORY
    def_bool KEXEC_FILE

 config KEXEC_SIG
    bool "Verify kernel signature during kexec_file_load() syscall"
    depends on KEXEC_FILE

 config KEXEC_SIG_FORCE
    bool "Require a valid signature in kexec_file_load() syscall"
    depends on KEXEC_SIG

 config KEXEC_BZIMAGE_VERIFY_SIG
    bool "Enable bzImage signature verification support"
    depends on KEXEC_SIG
    depends on SIGNED_PE_FILE_VERIFICATION
    select SYSTEM_TRUSTED_KEYRING

 config CRASH_DUMP
    bool "kernel crash dumps"
    depends on X86_64 || (X86_32 && HIGHMEM)

 config KEXEC_JUMP
    bool "kexec jump"
    depends on KEXEC && HIBERNATION
    help

becomes...
New:
config ARCH_SUPPORTS_KEXEC
    def_bool y

config ARCH_SUPPORTS_KEXEC_FILE
    def_bool X86_64 && CRYPTO && CRYPTO_SHA256

config ARCH_SELECTS_KEXEC_FILE
    def_bool y
    depends on KEXEC_FILE
    select HAVE_IMA_KEXEC if IMA

config ARCH_SUPPORTS_KEXEC_PURGATORY
    def_bool KEXEC_FILE

config ARCH_SUPPORTS_KEXEC_SIG
    def_bool y

config ARCH_SUPPORTS_KEXEC_SIG_FORCE
    def_bool y

config ARCH_SUPPORTS_KEXEC_BZIMAGE_VERIFY_SIG
    def_bool y

config ARCH_SUPPORTS_KEXEC_JUMP
    def_bool y

config ARCH_SUPPORTS_CRASH_DUMP
    def_bool X86_64 || (X86_32 && HIGHMEM)


===== powerpc (minus the help section) =====
Original:
 config KEXEC
    bool "kexec system call"
    depends on PPC_BOOK3S || PPC_E500 || (44x && !SMP)
    select KEXEC_CORE

 config KEXEC_FILE
    bool "kexec file based system call"
    select KEXEC_CORE
    select HAVE_IMA_KEXEC if IMA
    select KEXEC_ELF
    depends on PPC64
    depends on CRYPTO=y
    depends on CRYPTO_SHA256=y

 config ARCH_HAS_KEXEC_PURGATORY
    def_bool KEXEC_FILE

 config CRASH_DUMP
    bool "Build a dump capture kernel"
    depends on PPC64 || PPC_BOOK3S_32 || PPC_85xx || (44x && !SMP)
    select RELOCATABLE if PPC64 || 44x || PPC_85xx

becomes...
New:
config ARCH_SUPPORTS_KEXEC
    def_bool PPC_BOOK3S || PPC_E500 || (44x && !SMP)

config ARCH_SUPPORTS_KEXEC_FILE
    def_bool PPC64 && CRYPTO=y && CRYPTO_SHA256=y

config ARCH_SUPPORTS_KEXEC_PURGATORY
    def_bool KEXEC_FILE

config ARCH_SELECTS_KEXEC_FILE
    def_bool y
    depends on KEXEC_FILE
    select KEXEC_ELF
    select HAVE_IMA_KEXEC if IMA

config ARCH_SUPPORTS_CRASH_DUMP
    def_bool PPC64 || PPC_BOOK3S_32 || PPC_85xx || (44x && !SMP)

config ARCH_SELECTS_CRASH_DUMP
    def_bool y
    depends on CRASH_DUMP
    select RELOCATABLE if PPC64 || 44x || PPC_85xx


Testing Approach and Results

There are 388 config files in the arch/<arch>/configs directories.
For each of these config files, a .config is generated both before and
after this Kconfig series, and checked for equivalence. This approach
allows for a rather rapid check of all architectures and a wide
variety of configs wrt/ KEXEC and CRASH, and avoids requiring
compiling for all architectures and running kernels and run-time
testing.

For each config file, the olddefconfig, allnoconfig and allyesconfig
targets are utilized. In testing the randconfig has revealed problems
as well, but is not used in the before and after equivalence check
since one can not generate the "same" .config for before and after,
even if using the same KCONFIG_SEED since the option list is
different.

As such, the following script steps compare the before and after
of 'make olddefconfig'. The new symbols introduced by this series
are filtered out, but otherwise the config files are PASS only if
they were equivalent, and FAIL otherwise.

The script performs the test by doing the following:

 # Obtain the "golden" .config output for given config file
 # Reset test sandbox
 git checkout master
 git branch -D test_Kconfig
 git checkout -B test_Kconfig master
 make distclean
 # Write out updated config
 cp -f <config file> .config
 make ARCH=<arch> olddefconfig
 # Track each item in .config, LHSB is "golden"
 scoreboard .config 

 # Obtain the "changed" .config output for given config file
 # Reset test sandbox
 make distclean
 # Apply this Kconfig series
 git am <this Kconfig series>
 # Write out updated config
 cp -f <config file> .config
 make ARCH=<arch> olddefconfig
 # Track each item in .config, RHSB is "changed"
 scoreboard .config 

 # Determine test result
 # Filter-out new symbols introduced by this series
 # Filter-out symbol=n which not in either scoreboard
 # Compare LHSB "golden" and RHSB "changed" scoreboards and issue PASS/FAIL

The script was instrumental during the refactoring of Kconfig as it
continually revealed problems. The end result being that the solution
presented in this series passes all configs as checked by the script,
with the following exceptions:

- arch/ia64/configs/zx1_config with olddefconfig
  This config file has:
  # CONFIG_KEXEC is not set
  CONFIG_CRASH_DUMP=y
  and this refactor now couples KEXEC to CRASH_DUMP, so it is not
  possible to enable CRASH_DUMP without KEXEC.

- arch/sh/configs/* with allyesconfig
  The arch/sh/Kconfig codes CRASH_DUMP as dependent upon BROKEN_ON_MMU
  (which clearly is not meant to be set). This symbol is not provided
  but with the allyesconfig it is set to yes which enables CRASH_DUMP.
  But KEXEC is coded as dependent upon MMU, and is set to no in
  arch/sh/mm/Kconfig, so KEXEC is not enabled.
  This refactor now couples KEXEC to CRASH_DUMP, so it is not
  possible to enable CRASH_DUMP without KEXEC.

While the above exceptions are not equivalent to their original,
the config file produced is valid (and in fact better wrt/ CRASH_DUMP
handling).


This patch (of 14)

The config options for kexec and crash features are consolidated
into new file kernel/Kconfig.kexec. Under the "General Setup" submenu
is a new submenu "Kexec and crash handling". All the kexec and
crash options that were once in the arch-dependent submenu "Processor
type and features" are now consolidated in the new submenu.

The following options are impacted:

 - KEXEC
 - KEXEC_FILE
 - KEXEC_SIG
 - KEXEC_SIG_FORCE
 - KEXEC_BZIMAGE_VERIFY_SIG
 - KEXEC_JUMP
 - CRASH_DUMP

The three main options are KEXEC, KEXEC_FILE and CRASH_DUMP.

Architectures specify support of certain KEXEC and CRASH features with
similarly named new ARCH_SUPPORTS_<option> config options.

Architectures can utilize the new ARCH_SELECTS_<option> config
options to specify additional components when <option> is enabled.

To summarize, the ARCH_SUPPORTS_<option> permits the <option> to be
enabled, and the ARCH_SELECTS_<option> handles side effects (ie.
select statements).

Link: https://lkml.kernel.org/r/20230712161545.87870-1-eric.devolder@oracle.com
Link: https://lkml.kernel.org/r/20230712161545.87870-2-eric.devolder@oracle.com
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Cc. "H. Peter Anvin" <hpa@zytor.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com> # for x86
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Juerg Haefliger <juerg.haefliger@canonical.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Marc Aurèle La France <tsi@tuyoix.net>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Sebastian Reichel <sebastian.reichel@collabora.com>
Cc: Sourabh Jain <sourabhjain@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Will Deacon <will@kernel.org>
Cc: Xin Li <xin3.li@intel.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-18 10:18:51 -07:00
Kefeng Wang
527ed4f7d9 mm: remove arguments of show_mem()
All callers of show_mem() pass 0 and NULL, so we can remove the two
arguments by directly calling __show_mem(0, NULL, MAX_NR_ZONES - 1) in
show_mem().

Link: https://lkml.kernel.org/r/20230630062253.189440-1-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-18 10:12:02 -07:00
Loic Poulain
45071e1c28 init: Add support for rootwait timeout parameter
Add an optional timeout arg to 'rootwait' as the maximum time in
seconds to wait for the root device to show up before attempting
forced mount of the root filesystem.

Use case:
In case of device mapper usage for the rootfs (e.g. root=/dev/dm-0),
if the mapper is not able to create the virtual block for any reason
(wrong arguments, bad dm-verity signature, etc), the `rootwait` param
causes the kernel to wait forever. It may however be desirable to only
wait for a given time and then panic (force mount) to cause device reset.
This gives the bootloader a chance to detect the problem and to take some
measures, such as marking the booted partition as bad (for A/B case) or
entering a recovery mode.

In success case, mounting happens as soon as the root device is ready,
unlike the existing 'rootdelay' parameter which performs an unconditional
pause.

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Message-Id: <20230813082349.513386-1-loic.poulain@linaro.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-15 11:34:23 +02:00
Tejun Heo
2930155b2e workqueue: Initialize unbound CPU pods later in the boot
During boot, to initialize unbound CPU pods, wq_pod_init() was called from
workqueue_init(). This is early enough for NUMA nodes to be set up but
before SMP is brought up and CPU topology information is populated.

Workqueue is in the process of improving CPU locality for unbound workqueues
and will need access to topology information during pod init. This adds a
new init function workqueue_init_topology() which is called after CPU
topology information is available and replaces wq_pod_init().

As unbound CPU pods are now initialized after workqueues are activated, we
need to revisit the workqueues to apply the pod configuration. Workqueues
which are created before workqueue_init_topology() are set up so that they
always use the default worker pool. After pods are set up in
workqueue_init_topology(), wq_update_pod() is called on all existing
workqueues to update the pool associations accordingly.

Note that wq_update_pod_attrs_buf allocation is moved to
workqueue_init_early(). This isn't necessary right now but enables further
generalization of pod handling in the future.

This patch changes the initialization sequence but the end result should be
the same.

Signed-off-by: Tejun Heo <tj@kernel.org>
2023-08-07 15:57:24 -10:00
Randy Dunlap
98dfdd9ee9 sched/psi: Select KERNFS as needed
Users of KERNFS should select it to enforce its being built, so
do this to prevent a build error.

In file included from ../kernel/sched/build_utility.c:97:
../kernel/sched/psi.c: In function 'psi_trigger_poll':
../kernel/sched/psi.c:1479:17: error: implicit declaration of function 'kernfs_generic_poll' [-Werror=implicit-function-declaration]
 1479 |                 kernfs_generic_poll(t->of, wait);

Fixes: aff037078e ("sched/psi: use kernfs polling functions for PSI trigger polling")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Suren Baghdasaryan <surenb@google.com>
Link: lore.kernel.org/r/202307310732.r65EQFY0-lkp@intel.com
2023-08-02 16:19:25 +02:00
Linus Torvalds
ad2885979e Kbuild updates for v6.5
- Remove the deprecated rule to build *.dtbo from *.dts
 
  - Refactor section mismatch detection in modpost
 
  - Fix bogus ARM section mismatch detections
 
  - Fix error of 'make gtags' with O= option
 
  - Add Clang's target triple to KBUILD_CPPFLAGS to fix a build error with
    the latest LLVM version
 
  - Rebuild the built-in initrd when KBUILD_BUILD_TIMESTAMP is changed
 
  - Ignore more compiler-generated symbols for kallsyms
 
  - Fix 'make local*config' to handle the ${CONFIG_FOO} form in Makefiles
 
  - Enable more kernel-doc warnings with W=2
 
  - Refactor <linux/export.h> by generating KSYMTAB data by modpost
 
  - Deprecate <asm/export.h> and <asm-generic/export.h>
 
  - Remove the EXPORT_DATA_SYMBOL macro
 
  - Move the check for static EXPORT_SYMBOL back to modpost, which makes
    the build faster
 
  - Re-implement CONFIG_TRIM_UNUSED_KSYMS with one-pass algorithm
 
  - Warn missing MODULE_DESCRIPTION when building modules with W=1
 
  - Make 'make clean' robust against too long argument error
 
  - Exclude more objects from GCOV to fix CFI failures with GCOV
 
  - Allow 'make modules_install' to install modules.builtin and
    modules.builtin.modinfo even when CONFIG_MODULES is disabled
 
  - Include modules.builtin and modules.builtin.modinfo in the linux-image
    Debian package even when CONFIG_MODULES is disabled
 
  - Revive "Entering directory" logging for the latest Make version
 -----BEGIN PGP SIGNATURE-----
 
 iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAmSf6B0VHG1hc2FoaXJv
 eUBrZXJuZWwub3JnAAoJED2LAQed4NsGS2wP/1izzNJ/64XmQoyBDhZCbuOl7ODF
 n4wgVJnsJmRnD/RxXR/AZ0JZwQHhzpGISWQM61rVIf/RVFOB7Apx1HpmomKUUjrL
 Yc53wLfhTEizGgwttP6tusLM3RO6jkuMKhjC4rllc0tDLJ3zCcwAjSyiOQQ9PBcH
 txwAb8r4/TZUzDDCJ0d98WdhIsNDca/ISeRXKHMiIkfvHe+6yizDKu25Y4B6BL5g
 0VPJ9nVJZ+XVwRqdVR+UQoPYGZzZ/O2NqAtU7n4PpBKvFfLACILJW+aBDAz9SqN7
 RSxn1ahxwq0vrhlB9bSrQRj3N0g8zsi7/xShEZSnGLCbyxYilr5Gq8C59+QxOIJf
 5lGBwZlEgn5aWH+D9abwjEI/QOQbTI9kX09sVzweulGCN9iJlJqyIGsB0Ri0/S2R
 c/n7c8nLwnWnGF/+LXYvkrak8L9YRKori//YYf9zdvh4h1c2/0SS0nDoC29DhDru
 Am7YmhBAkJXXX3NUB2gLvtdp94GSumqefHeSJ5Sp9v/+f2Ft7ruY2ouJC81xDa4p
 nNpvolAq2txlZ9t5OU7x7DQiuCWYSws0W7PJ9FBhyHJchf21UHbcm97/HfDoU8rN
 ioLQGm+h+g6oZt8pArk45wccjkR3ydpEFDWenYbTEr2o3zLfeKigZps5uhCK3DW2
 gnVk50VNagkzrzvA
 =Rc1z
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild updates from Masahiro Yamada:

 - Remove the deprecated rule to build *.dtbo from *.dts

 - Refactor section mismatch detection in modpost

 - Fix bogus ARM section mismatch detections

 - Fix error of 'make gtags' with O= option

 - Add Clang's target triple to KBUILD_CPPFLAGS to fix a build error
   with the latest LLVM version

 - Rebuild the built-in initrd when KBUILD_BUILD_TIMESTAMP is changed

 - Ignore more compiler-generated symbols for kallsyms

 - Fix 'make local*config' to handle the ${CONFIG_FOO} form in Makefiles

 - Enable more kernel-doc warnings with W=2

 - Refactor <linux/export.h> by generating KSYMTAB data by modpost

 - Deprecate <asm/export.h> and <asm-generic/export.h>

 - Remove the EXPORT_DATA_SYMBOL macro

 - Move the check for static EXPORT_SYMBOL back to modpost, which makes
   the build faster

 - Re-implement CONFIG_TRIM_UNUSED_KSYMS with one-pass algorithm

 - Warn missing MODULE_DESCRIPTION when building modules with W=1

 - Make 'make clean' robust against too long argument error

 - Exclude more objects from GCOV to fix CFI failures with GCOV

 - Allow 'make modules_install' to install modules.builtin and
   modules.builtin.modinfo even when CONFIG_MODULES is disabled

 - Include modules.builtin and modules.builtin.modinfo in the
   linux-image Debian package even when CONFIG_MODULES is disabled

 - Revive "Entering directory" logging for the latest Make version

* tag 'kbuild-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (72 commits)
  modpost: define more R_ARM_* for old distributions
  kbuild: revive "Entering directory" for Make >= 4.4.1
  kbuild: set correct abs_srctree and abs_objtree for package builds
  scripts/mksysmap: Ignore prefixed KCFI symbols
  kbuild: deb-pkg: remove the CONFIG_MODULES check in buildeb
  kbuild: builddeb: always make modules_install, to install modules.builtin*
  modpost: continue even with unknown relocation type
  modpost: factor out Elf_Sym pointer calculation to section_rel()
  modpost: factor out inst location calculation to section_rel()
  kbuild: Disable GCOV for *.mod.o
  kbuild: Fix CFI failures with GCOV
  kbuild: make clean rule robust against too long argument error
  script: modpost: emit a warning when the description is missing
  kbuild: make modules_install copy modules.builtin(.modinfo)
  linux/export.h: rename 'sec' argument to 'license'
  modpost: show offset from symbol for section mismatch warnings
  modpost: merge two similar section mismatch warnings
  kbuild: implement CONFIG_TRIM_UNUSED_KSYMS without recursion
  modpost: use null string instead of NULL pointer for default namespace
  modpost: squash sym_update_namespace() into sym_add_exported()
  ...
2023-07-01 09:24:31 -07:00
Linus Torvalds
77b1a7f7a0 - Arnd Bergmann has fixed a bunch of -Wmissing-prototypes in
top-level directories.
 
 - Douglas Anderson has added a new "buddy" mode to the hardlockup
   detector.  It permits the detector to work on architectures which
   cannot provide the required interrupts, by having CPUs periodically
   perform checks on other CPUs.
 
 - Zhen Lei has enhanced kexec's ability to support two crash regions.
 
 - Petr Mladek has done a lot of cleanup on the hard lockup detector's
   Kconfig entries.
 
 - And the usual bunch of singleton patches in various places.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZJelTAAKCRDdBJ7gKXxA
 juDkAP0VXWynzkXoojdS/8e/hhi+htedmQ3v2dLZD+vBrctLhAEA7rcH58zAVoWa
 2ejqO6wDrRGUC7JQcO9VEjT0nv73UwU=
 =F293
 -----END PGP SIGNATURE-----

Merge tag 'mm-nonmm-stable-2023-06-24-19-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull non-mm updates from Andrew Morton:

 - Arnd Bergmann has fixed a bunch of -Wmissing-prototypes in top-level
   directories

 - Douglas Anderson has added a new "buddy" mode to the hardlockup
   detector. It permits the detector to work on architectures which
   cannot provide the required interrupts, by having CPUs periodically
   perform checks on other CPUs

 - Zhen Lei has enhanced kexec's ability to support two crash regions

 - Petr Mladek has done a lot of cleanup on the hard lockup detector's
   Kconfig entries

 - And the usual bunch of singleton patches in various places

* tag 'mm-nonmm-stable-2023-06-24-19-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (72 commits)
  kernel/time/posix-stubs.c: remove duplicated include
  ocfs2: remove redundant assignment to variable bit_off
  watchdog/hardlockup: fix typo in config HARDLOCKUP_DETECTOR_PREFER_BUDDY
  powerpc: move arch_trigger_cpumask_backtrace from nmi.h to irq.h
  devres: show which resource was invalid in __devm_ioremap_resource()
  watchdog/hardlockup: define HARDLOCKUP_DETECTOR_ARCH
  watchdog/sparc64: define HARDLOCKUP_DETECTOR_SPARC64
  watchdog/hardlockup: make HAVE_NMI_WATCHDOG sparc64-specific
  watchdog/hardlockup: declare arch_touch_nmi_watchdog() only in linux/nmi.h
  watchdog/hardlockup: make the config checks more straightforward
  watchdog/hardlockup: sort hardlockup detector related config values a logical way
  watchdog/hardlockup: move SMP barriers from common code to buddy code
  watchdog/buddy: simplify the dependency for HARDLOCKUP_DETECTOR_PREFER_BUDDY
  watchdog/buddy: don't copy the cpumask in watchdog_next_cpu()
  watchdog/buddy: cleanup how watchdog_buddy_check_hardlockup() is called
  watchdog/hardlockup: remove softlockup comment in touch_nmi_watchdog()
  watchdog/hardlockup: in watchdog_hardlockup_check() use cpumask_copy()
  watchdog/hardlockup: don't use raw_cpu_ptr() in watchdog_hardlockup_kick()
  watchdog/hardlockup: HAVE_NMI_WATCHDOG must implement watchdog_hardlockup_probe()
  watchdog/hardlockup: keep kernel.nmi_watchdog sysctl as 0444 if probe fails
  ...
2023-06-28 10:59:38 -07:00
Linus Torvalds
6e17c6de3d - Yosry Ahmed brought back some cgroup v1 stats in OOM logs.
- Yosry has also eliminated cgroup's atomic rstat flushing.
 
 - Nhat Pham adds the new cachestat() syscall.  It provides userspace
   with the ability to query pagecache status - a similar concept to
   mincore() but more powerful and with improved usability.
 
 - Mel Gorman provides more optimizations for compaction, reducing the
   prevalence of page rescanning.
 
 - Lorenzo Stoakes has done some maintanance work on the get_user_pages()
   interface.
 
 - Liam Howlett continues with cleanups and maintenance work to the maple
   tree code.  Peng Zhang also does some work on maple tree.
 
 - Johannes Weiner has done some cleanup work on the compaction code.
 
 - David Hildenbrand has contributed additional selftests for
   get_user_pages().
 
 - Thomas Gleixner has contributed some maintenance and optimization work
   for the vmalloc code.
 
 - Baolin Wang has provided some compaction cleanups,
 
 - SeongJae Park continues maintenance work on the DAMON code.
 
 - Huang Ying has done some maintenance on the swap code's usage of
   device refcounting.
 
 - Christoph Hellwig has some cleanups for the filemap/directio code.
 
 - Ryan Roberts provides two patch series which yield some
   rationalization of the kernel's access to pte entries - use the provided
   APIs rather than open-coding accesses.
 
 - Lorenzo Stoakes has some fixes to the interaction between pagecache
   and directio access to file mappings.
 
 - John Hubbard has a series of fixes to the MM selftesting code.
 
 - ZhangPeng continues the folio conversion campaign.
 
 - Hugh Dickins has been working on the pagetable handling code, mainly
   with a view to reducing the load on the mmap_lock.
 
 - Catalin Marinas has reduced the arm64 kmalloc() minimum alignment from
   128 to 8.
 
 - Domenico Cerasuolo has improved the zswap reclaim mechanism by
   reorganizing the LRU management.
 
 - Matthew Wilcox provides some fixups to make gfs2 work better with the
   buffer_head code.
 
 - Vishal Moola also has done some folio conversion work.
 
 - Matthew Wilcox has removed the remnants of the pagevec code - their
   functionality is migrated over to struct folio_batch.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZJejewAKCRDdBJ7gKXxA
 joggAPwKMfT9lvDBEUnJagY7dbDPky1cSYZdJKxxM2cApGa42gEA6Cl8HRAWqSOh
 J0qXCzqaaN8+BuEyLGDVPaXur9KirwY=
 =B7yQ
 -----END PGP SIGNATURE-----

Merge tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull mm updates from Andrew Morton:

 - Yosry Ahmed brought back some cgroup v1 stats in OOM logs

 - Yosry has also eliminated cgroup's atomic rstat flushing

 - Nhat Pham adds the new cachestat() syscall. It provides userspace
   with the ability to query pagecache status - a similar concept to
   mincore() but more powerful and with improved usability

 - Mel Gorman provides more optimizations for compaction, reducing the
   prevalence of page rescanning

 - Lorenzo Stoakes has done some maintanance work on the
   get_user_pages() interface

 - Liam Howlett continues with cleanups and maintenance work to the
   maple tree code. Peng Zhang also does some work on maple tree

 - Johannes Weiner has done some cleanup work on the compaction code

 - David Hildenbrand has contributed additional selftests for
   get_user_pages()

 - Thomas Gleixner has contributed some maintenance and optimization
   work for the vmalloc code

 - Baolin Wang has provided some compaction cleanups,

 - SeongJae Park continues maintenance work on the DAMON code

 - Huang Ying has done some maintenance on the swap code's usage of
   device refcounting

 - Christoph Hellwig has some cleanups for the filemap/directio code

 - Ryan Roberts provides two patch series which yield some
   rationalization of the kernel's access to pte entries - use the
   provided APIs rather than open-coding accesses

 - Lorenzo Stoakes has some fixes to the interaction between pagecache
   and directio access to file mappings

 - John Hubbard has a series of fixes to the MM selftesting code

 - ZhangPeng continues the folio conversion campaign

 - Hugh Dickins has been working on the pagetable handling code, mainly
   with a view to reducing the load on the mmap_lock

 - Catalin Marinas has reduced the arm64 kmalloc() minimum alignment
   from 128 to 8

 - Domenico Cerasuolo has improved the zswap reclaim mechanism by
   reorganizing the LRU management

 - Matthew Wilcox provides some fixups to make gfs2 work better with the
   buffer_head code

 - Vishal Moola also has done some folio conversion work

 - Matthew Wilcox has removed the remnants of the pagevec code - their
   functionality is migrated over to struct folio_batch

* tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (380 commits)
  mm/hugetlb: remove hugetlb_set_page_subpool()
  mm: nommu: correct the range of mmap_sem_read_lock in task_mem()
  hugetlb: revert use of page_cache_next_miss()
  Revert "page cache: fix page_cache_next/prev_miss off by one"
  mm/vmscan: fix root proactive reclaim unthrottling unbalanced node
  mm: memcg: rename and document global_reclaim()
  mm: kill [add|del]_page_to_lru_list()
  mm: compaction: convert to use a folio in isolate_migratepages_block()
  mm: zswap: fix double invalidate with exclusive loads
  mm: remove unnecessary pagevec includes
  mm: remove references to pagevec
  mm: rename invalidate_mapping_pagevec to mapping_try_invalidate
  mm: remove struct pagevec
  net: convert sunrpc from pagevec to folio_batch
  i915: convert i915_gpu_error to use a folio_batch
  pagevec: rename fbatch_count()
  mm: remove check_move_unevictable_pages()
  drm: convert drm_gem_put_pages() to use a folio_batch
  i915: convert shmem_sg_free_table() to use a folio_batch
  scatterlist: add sg_set_folio()
  ...
2023-06-28 10:28:11 -07:00
Linus Torvalds
6f612579be objtool changes for v6.5:
- Build footprint & performance improvements:
 
     - Reduce memory usage with CONFIG_DEBUG_INFO=y
 
       In the worst case of an allyesconfig+CONFIG_DEBUG_INFO=y kernel, DWARF
       creates almost 200 million relocations, ballooning objtool's peak heap
       usage to 53GB.  These patches reduce that to 25GB.
 
       On a distro-type kernel with kernel IBT enabled, they reduce objtool's
       peak heap usage from 4.2GB to 2.8GB.
 
       These changes also improve the runtime significantly.
 
 - Debuggability improvements:
 
     - Add the unwind_debug command-line option, for more extend unwinding
       debugging output.
     - Limit unreachable warnings to once per function
     - Add verbose option for disassembling affected functions
     - Include backtrace in verbose mode
     - Detect missing __noreturn annotations
     - Ignore exc_double_fault() __noreturn warnings
     - Remove superfluous global_noreturns entries
     - Move noreturn function list to separate file
     - Add __kunit_abort() to noreturns
 
 - Unwinder improvements:
 
     - Allow stack operations in UNWIND_HINT_UNDEFINED regions
     - drm/vmwgfx: Add unwind hints around RBP clobber
 
 - Cleanups:
 
     - Move the x86 entry thunk restore code into thunk functions
     - x86/unwind/orc: Use swap() instead of open coding it
     - Remove unnecessary/unused variables
 
 - Fixes for modern stack canary handling
 
 Signed-off-by: Ingo Molnar <mingo@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmSaxcoRHG1pbmdvQGtl
 cm5lbC5vcmcACgkQEnMQ0APhK1ht5w//f8mBoABct29pS4ib6pDwRZQDoG8fCA7M
 +KWjFD1AhX7RsJVEbM4uBUXdSWZD61xxIa8p8LO2jjzE5RyhM+EuNaisKujKqmfj
 uQTSnRhIRHMPqqVGK/gQxy1v4+3+12O32XFIJhAPYCp/dpbZJ2yKDsiHjapzZTDy
 BM+86hbIyHFmSl5uJcBFHEv6EGhoxwdrrrOxhpao1CqfAUi+uVgamHGwVqx+NtTY
 MvOmcy3/0ukHwDLON0MIMu9MSwvnXorD7+RSkYstwAM/k6ao/k78iJ31sOcynpRn
 ri0gmfygJsh2bxL4JUlY4ZeTs7PLWkj3i60deePc5u6EyV4JDJ2borUibs5oGoF6
 pN0AwbtubLHHhUI/v74B3E6K6ZGvLiEn9dsNTuXsJffD+qU2REb+WLhr4ut+E1Wi
 IKWrYh811yBLyOqFEW3XudZTiXSJlgi3eYiCxspEsKw2RIFFt2g6vYcwrIb0Hatw
 8R4/jCWk1nc6Wa3RQYsVnhkglAECSKQdDfS7p2e1hNUTjZuess4EEJjSLs8upIQ9
 D1bmuUxEzRxVwAZtXYNh0NKe7OtyOrqgsVTQuqxvWXq2CpC7Hqj8piVJWHdBWgHO
 0o2OQqjwSrzAtevpAIaYQv9zhPs1hV7CpBgzzqWGXrwJ3vM6YoSRLf0bg+5OkN8I
 O4U2xq2OVa8=
 =uNnc
 -----END PGP SIGNATURE-----

Merge tag 'objtool-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull objtool updates from Ingo Molar:
 "Build footprint & performance improvements:

   - Reduce memory usage with CONFIG_DEBUG_INFO=y

     In the worst case of an allyesconfig+CONFIG_DEBUG_INFO=y kernel,
     DWARF creates almost 200 million relocations, ballooning objtool's
     peak heap usage to 53GB. These patches reduce that to 25GB.

     On a distro-type kernel with kernel IBT enabled, they reduce
     objtool's peak heap usage from 4.2GB to 2.8GB.

     These changes also improve the runtime significantly.

  Debuggability improvements:

   - Add the unwind_debug command-line option, for more extend unwinding
     debugging output
   - Limit unreachable warnings to once per function
   - Add verbose option for disassembling affected functions
   - Include backtrace in verbose mode
   - Detect missing __noreturn annotations
   - Ignore exc_double_fault() __noreturn warnings
   - Remove superfluous global_noreturns entries
   - Move noreturn function list to separate file
   - Add __kunit_abort() to noreturns

  Unwinder improvements:

   - Allow stack operations in UNWIND_HINT_UNDEFINED regions
   - drm/vmwgfx: Add unwind hints around RBP clobber

  Cleanups:

   - Move the x86 entry thunk restore code into thunk functions
   - x86/unwind/orc: Use swap() instead of open coding it
   - Remove unnecessary/unused variables

  Fixes for modern stack canary handling"

* tag 'objtool-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits)
  x86/orc: Make the is_callthunk() definition depend on CONFIG_BPF_JIT=y
  objtool: Skip reading DWARF section data
  objtool: Free insns when done
  objtool: Get rid of reloc->rel[a]
  objtool: Shrink elf hash nodes
  objtool: Shrink reloc->sym_reloc_entry
  objtool: Get rid of reloc->jump_table_start
  objtool: Get rid of reloc->addend
  objtool: Get rid of reloc->type
  objtool: Get rid of reloc->offset
  objtool: Get rid of reloc->idx
  objtool: Get rid of reloc->list
  objtool: Allocate relocs in advance for new rela sections
  objtool: Add for_each_reloc()
  objtool: Don't free memory in elf_close()
  objtool: Keep GElf_Rel[a] structs synced
  objtool: Add elf_create_section_pair()
  objtool: Add mark_sec_changed()
  objtool: Fix reloc_hash size
  objtool: Consolidate rel/rela handling
  ...
2023-06-27 15:05:41 -07:00
Linus Torvalds
7cffdbe360 Updates for the x86 boot process:
- Initialize FPU late.
 
    Right now FPU is initialized very early during boot. There is no real
    requirement to do so. The only requirement is to have it done before
    alternatives are patched.
 
    That's done in check_bugs() which does way more than what the function
    name suggests.
 
    So first rename check_bugs() to arch_cpu_finalize_init() which makes it
    clear what this is about.
 
    Move the invocation of arch_cpu_finalize_init() earlier in
    start_kernel() as it has to be done before fork_init() which needs to
    know the FPU register buffer size.
 
    With those prerequisites the FPU initialization can be moved into
    arch_cpu_finalize_init(), which removes it from the early and fragile
    part of the x86 bringup.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmSZdNYTHHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYoaNBEACWtVd1uhqQldIFgSvZYujsrWXlmkU+
 pok6gDzKQNwZADiXW/tn5fP8SBLWT0pgLM9d+oZ5mEaLaOW7HcZLEHcVrn74e3TT
 53xN8e1zCzyjCJ/x22vrKH4sn/bU+bQyzSNVu9Disqn9Fl+ts37FqAHDv/ExbneD
 DaYXXCLgQsyGbPLD8B7yGOpJTGBUTJxNQS1ZFElBaRsAaw0mYZOEoPvuTFK4o7Uz
 GUB2vGefmeNfX+EgLYKG9QoS0F3SMS9X2IYswy1H76ZnV/eXmTsA1S3u3X9yX7kC
 XBnPtCC+iX+7o3xFkTpa0oQUdzEyGOItExZZgce6jEQu4Fl7NoIJxhlMg9/Y+vcF
 ntipEKSWFLAi1GkZzeKRwSSsoWqRaFxOKLy8qhn9kud09k+UtMBkNrF1CSp9laAz
 QParu3B1oHPEzx/jS0bSOCMN+AQZH8rX7LxRp4kpBOeBSZNCnfaBUzfIvmccPls+
 EJTO/0JUpRm5LsPSDiJhypPRoOOIP26IloR6OoZTcI3p76NrnYblRvisvuFAgDU6
 bk7Belf+GDx0kBZugqQgok7nDaHIBR7vEmca1NV8507UrffVyxLAiI4CiWPcFdOq
 ovhO8K+gP4xvzZx4cXZBwYwusjvl/oxKy8yQiGgoftDiWU4sdUCSrwX3x27+hUYL
 2P1OLDOXSGwESQ==
 =yxMj
 -----END PGP SIGNATURE-----

Merge tag 'x86-boot-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 boot updates from Thomas Gleixner:
 "Initialize FPU late.

  Right now FPU is initialized very early during boot. There is no real
  requirement to do so. The only requirement is to have it done before
  alternatives are patched.

  That's done in check_bugs() which does way more than what the function
  name suggests.

  So first rename check_bugs() to arch_cpu_finalize_init() which makes
  it clear what this is about.

  Move the invocation of arch_cpu_finalize_init() earlier in
  start_kernel() as it has to be done before fork_init() which needs to
  know the FPU register buffer size.

  With those prerequisites the FPU initialization can be moved into
  arch_cpu_finalize_init(), which removes it from the early and fragile
  part of the x86 bringup"

* tag 'x86-boot-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mem_encrypt: Unbreak the AMD_MEM_ENCRYPT=n build
  x86/fpu: Move FPU initialization into arch_cpu_finalize_init()
  x86/fpu: Mark init functions __init
  x86/fpu: Remove cpuinfo argument from init functions
  x86/init: Initialize signal frame size late
  init, x86: Move mem_encrypt_init() into arch_cpu_finalize_init()
  init: Invoke arch_cpu_finalize_init() earlier
  init: Remove check_bugs() leftovers
  um/cpu: Switch to arch_cpu_finalize_init()
  sparc/cpu: Switch to arch_cpu_finalize_init()
  sh/cpu: Switch to arch_cpu_finalize_init()
  mips/cpu: Switch to arch_cpu_finalize_init()
  m68k/cpu: Switch to arch_cpu_finalize_init()
  loongarch/cpu: Switch to arch_cpu_finalize_init()
  ia64/cpu: Switch to arch_cpu_finalize_init()
  ARM: cpu: Switch to arch_cpu_finalize_init()
  x86/cpu: Switch to arch_cpu_finalize_init()
  init: Provide arch_cpu_finalize_init()
2023-06-26 13:39:10 -07:00
Linus Torvalds
a0433f8cae for-6.5/block-2023-06-23
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmSV8dwQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpilGD/9Yys1oxIXJpRf00fzrylAlBthRxMjFQVWw
 zAut106hAQiBHvU8IkmGA3MvEFVHxtzwYhHI7IR8K3aZBIqscweCqmVI9JyogJw9
 U9Twnzel47VmuKdM94FeoN+hbj1fP8EWTjzmy67/zEEfFCdmHvNlMi3lSrGYIpFy
 39LxTB99Y4UarM5PtWbes37GYYljzMSWKuo4AfBkvq1eQa+sZ0Vq2xAABKq3UM7f
 apqhgHtkJooRePDP0eQp+kAyyVMgW2jIK+oIdJDxNF3CKTu2w40RzaYz6fp+jVSU
 H4R/xS59GW4/xql+VBJDh/qJg9K62DPPYjlW8BmSR8+IjvfFpsyH3/MacE50CD3P
 20fs/Mnj49H79fDrQEHJI53cOOb2EmUitbwLbvOcColNTPpt8loBtdQxjF2RMU8R
 Nyort9DJPFclYCxky1LYg1CNEC2Ln4Zy/jD47wPvqRmOQphOoVlV/hPnOEqvjaZC
 49Vn70W2DeE9cXvYI7ha+XIg6/oj+Gs3iusEbV08Ci7EAtXgI+ZUUsQ97K8UNiUh
 h2lqSJtuI7lBpYP9sf+BeCch5UCC+xGYyTdoM5f58lehWBBPtbs0g7S9RyRyOYxe
 n+yxEUo3dAGzJ/xsKAjinbZfeWIpr0b1TkAh4w3Cq/BKzRr9Bp8lBAxYuancbQ+Y
 1ADPteUOTA==
 =zP4Y
 -----END PGP SIGNATURE-----

Merge tag 'for-6.5/block-2023-06-23' of git://git.kernel.dk/linux

Pull block updates from Jens Axboe:

 - NVMe pull request via Keith:
      - Various cleanups all around (Irvin, Chaitanya, Christophe)
      - Better struct packing (Christophe JAILLET)
      - Reduce controller error logs for optional commands (Keith)
      - Support for >=64KiB block sizes (Daniel Gomez)
      - Fabrics fixes and code organization (Max, Chaitanya, Daniel
        Wagner)

 - bcache updates via Coly:
      - Fix a race at init time (Mingzhe Zou)
      - Misc fixes and cleanups (Andrea, Thomas, Zheng, Ye)

 - use page pinning in the block layer for dio (David)

 - convert old block dio code to page pinning (David, Christoph)

 - cleanups for pktcdvd (Andy)

 - cleanups for rnbd (Guoqing)

 - use the unchecked __bio_add_page() for the initial single page
   additions (Johannes)

 - fix overflows in the Amiga partition handling code (Michael)

 - improve mq-deadline zoned device support (Bart)

 - keep passthrough requests out of the IO schedulers (Christoph, Ming)

 - improve support for flush requests, making them less special to deal
   with (Christoph)

 - add bdev holder ops and shutdown methods (Christoph)

 - fix the name_to_dev_t() situation and use cases (Christoph)

 - decouple the block open flags from fmode_t (Christoph)

 - ublk updates and cleanups, including adding user copy support (Ming)

 - BFQ sanity checking (Bart)

 - convert brd from radix to xarray (Pankaj)

 - constify various structures (Thomas, Ivan)

 - more fine grained persistent reservation ioctl capability checks
   (Jingbo)

 - misc fixes and cleanups (Arnd, Azeem, Demi, Ed, Hengqi, Hou, Jan,
   Jordy, Li, Min, Yu, Zhong, Waiman)

* tag 'for-6.5/block-2023-06-23' of git://git.kernel.dk/linux: (266 commits)
  scsi/sg: don't grab scsi host module reference
  ext4: Fix warning in blkdev_put()
  block: don't return -EINVAL for not found names in devt_from_devname
  cdrom: Fix spectre-v1 gadget
  block: Improve kernel-doc headers
  blk-mq: don't insert passthrough request into sw queue
  bsg: make bsg_class a static const structure
  ublk: make ublk_chr_class a static const structure
  aoe: make aoe_class a static const structure
  block/rnbd: make all 'class' structures const
  block: fix the exclusive open mask in disk_scan_partitions
  block: add overflow checks for Amiga partition support
  block: change all __u32 annotations to __be32 in affs_hardblocks.h
  block: fix signed int overflow in Amiga partition support
  block: add capacity validation in bdev_add_partition()
  block: fine-granular CAP_SYS_ADMIN for Persistent Reservation
  block: disallow Persistent Reservation on partitions
  reiserfs: fix blkdev_put() warning from release_journal_dev()
  block: fix wrong mode for blkdev_get_by_dev() from disk_scan_partitions()
  block: document the holder argument to blkdev_get_by_path
  ...
2023-06-26 12:47:20 -07:00
Sami Tolvanen
ddf56288ee kbuild: Fix CFI failures with GCOV
With GCOV_PROFILE_ALL, Clang injects __llvm_gcov_* functions to
each object file, and the functions are indirectly called during
boot. However, when code is injected to object files that are not
part of vmlinux.o, it's also not processed by objtool, which breaks
CFI hash randomization as the hashes in these files won't be
included in the .cfi_sites section and thus won't be randomized.

Similarly to commit 42633ed852 ("kbuild: Fix CFI hash
randomization with KASAN"), disable GCOV for .vmlinux.export.o and
init/version-timestamp.o to avoid emitting unnecessary functions to
object files that don't otherwise have executable code.

Fixes: 0c3e806ec0 ("x86/cfi: Add boot time hash randomization")
Reported-by: Joe Fradley <joefradley@google.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-06-25 23:12:20 +09:00
Thomas Gleixner
439e17576e init, x86: Move mem_encrypt_init() into arch_cpu_finalize_init()
Invoke the X86ism mem_encrypt_init() from X86 arch_cpu_finalize_init() and
remove the weak fallback from the core code.

No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230613224545.670360645@linutronix.de
2023-06-16 10:16:00 +02:00
Thomas Gleixner
9df9d2f047 init: Invoke arch_cpu_finalize_init() earlier
X86 is reworking the boot process so that initializations which are not
required during early boot can be moved into the late boot process and out
of the fragile and restricted initial boot phase.

arch_cpu_finalize_init() is the obvious place to do such initializations,
but arch_cpu_finalize_init() is invoked too late in start_kernel() e.g. for
initializing the FPU completely. fork_init() requires that the FPU is
initialized as the size of task_struct on X86 depends on the size of the
required FPU register buffer.

Fortunately none of the init calls between calibrate_delay() and
arch_cpu_finalize_init() is relevant for the functionality of
arch_cpu_finalize_init().

Invoke it right after calibrate_delay() where everything which is relevant
for arch_cpu_finalize_init() has been set up already.

No functional change intended.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Link: https://lore.kernel.org/r/20230613224545.612182854@linutronix.de
2023-06-16 10:16:00 +02:00
Thomas Gleixner
61235b24b9 init: Remove check_bugs() leftovers
Everything is converted over to arch_cpu_finalize_init(). Remove the
check_bugs() leftovers including the empty stubs in asm-generic, alpha,
parisc, powerpc and xtensa.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Link: https://lore.kernel.org/r/20230613224545.553215951@linutronix.de
2023-06-16 10:16:00 +02:00
Thomas Gleixner
7725acaa4f init: Provide arch_cpu_finalize_init()
check_bugs() has become a dumping ground for all sorts of activities to
finalize the CPU initialization before running the rest of the init code.

Most are empty, a few do actual bug checks, some do alternative patching
and some cobble a CPU advertisement string together....

Aside of that the current implementation requires duplicated function
declaration and mostly empty header files for them.

Provide a new function arch_cpu_finalize_init(). Provide a generic
declaration if CONFIG_ARCH_HAS_CPU_FINALIZE_INIT is selected and a stub
inline otherwise.

This requires a temporary #ifdef in start_kernel() which will be removed
along with check_bugs() once the architectures are converted over.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230613224544.957805717@linutronix.de
2023-06-16 10:15:59 +02:00
Angus Chen
6aee6723f1 init: add bdev fs printk if mount_block_root failed
Booting with the QEMU command line:
"qemu-system-x86_64 -append root=/dev/vda rootfstype=ext4 ..."
will panic if ext4 is not builtin and a request to load the ext4 module
fails.

[    1.729006] VFS: Cannot open root device "vda" or unknown-block(253,0): error -19
[    1.730603] Please append a correct "root=" boot option; here are the available partitions:
[    1.732323] fd00          256000 vda
[    1.732329]  driver: virtio_blk
[    1.734194] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(253,0)
[    1.734771] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.4.0-rc2+ #53
[    1.735194] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.10.2-1ubuntu1 04/01/2014
[    1.735772] Call Trace:
[    1.735950]  <TASK>
[    1.736113]  dump_stack_lvl+0x32/0x50
[    1.736367]  panic+0x108/0x310
[    1.736570]  mount_block_root+0x161/0x310
[    1.736849]  ? rdinit_setup+0x40/0x40
[    1.737088]  prepare_namespace+0x10c/0x180
[    1.737393]  kernel_init_freeable+0x354/0x450
[    1.737707]  ? rest_init+0xd0/0xd0
[    1.737945]  kernel_init+0x16/0x130
[    1.738196]  ret_from_fork+0x1f/0x30

As a hint, print all the bdev fstypes which are available.

[akpm@linux-foundation.org: fix spelling in printk message]
Link: https://lkml.kernel.org/r/20230518035321.1672-1-angus.chen@jaguarmicro.com
Signed-off-by: Angus Chen <angus.chen@jaguarmicro.com>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 17:44:17 -07:00
Arnd Bergmann
73648e6fa7 init: move cifs_root_data() prototype into linux/mount.h
cifs_root_data() is defined in cifs and called from early init code, but
lacks a global prototype:

fs/cifs/cifsroot.c:83:12: error: no previous prototype for 'cifs_root_data'

Move the declaration from do_mounts.c into an appropriate header.

Link: https://lkml.kernel.org/r/20230517131102.934196-13-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Eric Paris <eparis@redhat.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 17:44:16 -07:00
Arnd Bergmann
ad1a48301f init: consolidate prototypes in linux/init.h
The init/main.c file contains some extern declarations for functions
defined in architecture code, and it defines some other functions that are
called from architecture code with a custom prototype.  Both of those
result in warnings with 'make W=1':

init/calibrate.c:261:37: error: no previous prototype for 'calibrate_delay_is_known' [-Werror=missing-prototypes]
init/main.c:790:20: error: no previous prototype for 'mem_encrypt_init' [-Werror=missing-prototypes]
init/main.c:792:20: error: no previous prototype for 'poking_init' [-Werror=missing-prototypes]
arch/arm64/kernel/irq.c:122:13: error: no previous prototype for 'init_IRQ' [-Werror=missing-prototypes]
arch/arm64/kernel/time.c:55:13: error: no previous prototype for 'time_init' [-Werror=missing-prototypes]
arch/x86/kernel/process.c:935:13: error: no previous prototype for 'arch_post_acpi_subsys_init' [-Werror=missing-prototypes]
init/calibrate.c:261:37: error: no previous prototype for 'calibrate_delay_is_known' [-Werror=missing-prototypes]
kernel/fork.c:991:20: error: no previous prototype for 'arch_task_cache_init' [-Werror=missing-prototypes]

Add prototypes for all of these in include/linux/init.h or another
appropriate header, and remove the duplicate declarations from
architecture specific code.

[sfr@canb.auug.org.au: declare time_init_early()]
  Link: https://lkml.kernel.org/r/20230519124311.5167221c@canb.auug.org.au
Link: https://lkml.kernel.org/r/20230517131102.934196-12-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Eric Paris <eparis@redhat.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 17:44:16 -07:00
Nhat Pham
cf264e1329 cachestat: implement cachestat syscall
There is currently no good way to query the page cache state of large file
sets and directory trees.  There is mincore(), but it scales poorly: the
kernel writes out a lot of bitmap data that userspace has to aggregate,
when the user really doesn not care about per-page information in that
case.  The user also needs to mmap and unmap each file as it goes along,
which can be quite slow as well.

Some use cases where this information could come in handy:
  * Allowing database to decide whether to perform an index scan or
    direct table queries based on the in-memory cache state of the
    index.
  * Visibility into the writeback algorithm, for performance issues
    diagnostic.
  * Workload-aware writeback pacing: estimating IO fulfilled by page
    cache (and IO to be done) within a range of a file, allowing for
    more frequent syncing when and where there is IO capacity, and
    batching when there is not.
  * Computing memory usage of large files/directory trees, analogous to
    the du tool for disk usage.

More information about these use cases could be found in the following
thread:

https://lore.kernel.org/lkml/20230315170934.GA97793@cmpxchg.org/

This patch implements a new syscall that queries cache state of a file and
summarizes the number of cached pages, number of dirty pages, number of
pages marked for writeback, number of (recently) evicted pages, etc.  in a
given range.  Currently, the syscall is only wired in for x86
architecture.

NAME
    cachestat - query the page cache statistics of a file.

SYNOPSIS
    #include <sys/mman.h>

    struct cachestat_range {
        __u64 off;
        __u64 len;
    };

    struct cachestat {
        __u64 nr_cache;
        __u64 nr_dirty;
        __u64 nr_writeback;
        __u64 nr_evicted;
        __u64 nr_recently_evicted;
    };

    int cachestat(unsigned int fd, struct cachestat_range *cstat_range,
        struct cachestat *cstat, unsigned int flags);

DESCRIPTION
    cachestat() queries the number of cached pages, number of dirty
    pages, number of pages marked for writeback, number of evicted
    pages, number of recently evicted pages, in the bytes range given by
    `off` and `len`.

    An evicted page is a page that is previously in the page cache but
    has been evicted since. A page is recently evicted if its last
    eviction was recent enough that its reentry to the cache would
    indicate that it is actively being used by the system, and that
    there is memory pressure on the system.

    These values are returned in a cachestat struct, whose address is
    given by the `cstat` argument.

    The `off` and `len` arguments must be non-negative integers. If
    `len` > 0, the queried range is [`off`, `off` + `len`]. If `len` ==
    0, we will query in the range from `off` to the end of the file.

    The `flags` argument is unused for now, but is included for future
    extensibility. User should pass 0 (i.e no flag specified).

    Currently, hugetlbfs is not supported.

    Because the status of a page can change after cachestat() checks it
    but before it returns to the application, the returned values may
    contain stale information.

RETURN VALUE
    On success, cachestat returns 0. On error, -1 is returned, and errno
    is set to indicate the error.

ERRORS
    EFAULT cstat or cstat_args points to an invalid address.

    EINVAL invalid flags.

    EBADF  invalid file descriptor.

    EOPNOTSUPP file descriptor is of a hugetlbfs file

[nphamcs@gmail.com: replace rounddown logic with the existing helper]
  Link: https://lkml.kernel.org/r/20230504022044.3675469-1-nphamcs@gmail.com
Link: https://lkml.kernel.org/r/20230503013608.2431726-3-nphamcs@gmail.com
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Brian Foster <bfoster@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 16:25:16 -07:00
Christoph Hellwig
702f3189e4 block: move the code to do early boot lookup of block devices to block/
Create a new block/early-lookup.c to keep the early block device lookup
code instead of having this code sit with the early mount code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230531125535.676098-16-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-05 10:57:40 -06:00
Christoph Hellwig
079caa35f7 init: clear root_wait on all invalid root= strings
Instead of only clearing root_wait in devt_from_partuuid when the UUID
format was invalid, do that in parse_root_device for all strings that
failed to parse.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230531125535.676098-15-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-05 10:57:40 -06:00
Christoph Hellwig
cf056a4312 init: improve the name_to_dev_t interface
name_to_dev_t has a very misleading name, that doesn't make clear
it should only be used by the early init code, and also has a bad
calling convention that doesn't allow returning different kinds of
errors.  Rename it to early_lookup_bdev to make the use case clear,
and return an errno, where -EINVAL means the string could not be
parsed, and -ENODEV means it the string was valid, but there was
no device found for it.

Also stub out the whole call for !CONFIG_BLOCK as all the non-block
root cases are always covered in the caller.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230531125535.676098-14-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-05 10:56:46 -06:00
Christoph Hellwig
c0c1a7dcb6 init: move the nfs/cifs/ram special cases out of name_to_dev_t
The nfs/cifs/ram special case only needs to be parsed once, and only in
the boot code.  Move them out of name_to_dev_t and into
prepare_namespace.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230531125535.676098-13-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-05 10:55:20 -06:00
Christoph Hellwig
3701c600a3 init: factor the root_wait logic in prepare_namespace into a helper
The root_wait logic is a bit obsfucated right now.  Expand it and move it
into a helper.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230531125535.676098-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-05 10:55:20 -06:00
Christoph Hellwig
07d63cbb67 init: handle ubi/mtd root mounting like all other root types
Assign a Root_Generic magic value for UBI/MTD root and handle the root
mounting in mount_root like all other root types.  Besides making the
code more clear this also means that UBI/MTD root can be used together
with an initrd (not that anyone should care).

Also factor parsing of the root name into a helper now that it can
be easily done and will get more complicated with subsequent patches.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230531125535.676098-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-05 10:55:20 -06:00
Christoph Hellwig
73231b58b1 init: don't remove the /dev/ prefix from error messages
Remove the code that drops the /dev/ prefix from root_device_name, which
is only used for error messages when mounting the root device fails.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230531125535.676098-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-05 10:55:20 -06:00
Christoph Hellwig
c8643c72bc init: pass root_device_name explicitly
Instead of declaring root_device_name as a global variable pass it as an
argument to the functions using it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230531125535.676098-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-05 10:55:20 -06:00
Christoph Hellwig
a6a41d39c2 init: refactor mount_root
Provide stubs for all the lower level mount helpers, and just switch
on ROOT_DEV in the main function.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230531125535.676098-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-05 10:55:20 -06:00
Christoph Hellwig
e3102722ff init: rename mount_block_root to mount_root_generic
mount_block_root is also used to mount non-block file systems, so give
it a better name.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230531125535.676098-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-05 10:55:20 -06:00
Christoph Hellwig
aa5f6ed8c2 driver core: return bool from driver_probe_done
bool is the most sensible return value for a yes/no return.  Also
add __init as this funtion is only called from the early boot code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230531125535.676098-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-05 10:55:20 -06:00
Yihuan Pan
26e293f73f init: remove unused names parameter in split_fs_names()
The split_fs_names() function takes a names parameter, but the function
actually uses the root_fs_names global variable instead. This names
parameter is not used in the function, so it can be safely removed.

This change does not affect the functionality of split_fs_names() or any
other part of the kernel.

Signed-off-by: Yihuan Pan <xun794@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Message-Id: <4lsiigvaw4lxcs37rlhgepv77xyxym6krkqcpc3xfncnswok3y@b67z3b44orar>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-06-05 10:45:31 +02:00
ndesaulniers@google.com
dc1d05536f start_kernel: Omit prevent_tail_call_optimization() for newer toolchains
prevent_tail_call_optimization() was added in
commit a9a3ed1eff ("x86: Fix early boot crash on gcc-10, third try")
to work around stack canaries getting inserted into functions that would
initialize the stack canary in the first place.

Now that we have no_stack_protector function attribute (gcc-11+,
clang-7+) and use it on start_kernel(), remove the call to
prevent_tail_call_optimization() such that we may one day remove it
outright.

Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20230412-no_stackp-v2-2-116f9fe4bbe7@google.com
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2023-05-16 06:28:24 -07:00
ndesaulniers@google.com
514ca14ed5 start_kernel: Add __no_stack_protector function attribute
Back during the discussion of
commit a9a3ed1eff ("x86: Fix early boot crash on gcc-10, third try")
we discussed the need for a function attribute to control the omission
of stack protectors on a per-function basis; at the time Clang had
support for no_stack_protector but GCC did not. This was fixed in
gcc-11. Now that the function attribute is available, let's start using
it.

Callers of boot_init_stack_canary need to use this function attribute
unless they're compiled with -fno-stack-protector, otherwise the canary
stored in the stack slot of the caller will differ upon the call to
boot_init_stack_canary. This will lead to a call to __stack_chk_fail()
then panic.

Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=94722
Link: https://lore.kernel.org/all/20200316130414.GC12561@hirez.programming.kicks-ass.net/
Tested-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20230412-no_stackp-v2-1-116f9fe4bbe7@google.com
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>

Signed-off-by: ndesaulniers@google.com <ndesaulniers@google.com>
2023-05-16 06:28:15 -07:00
Linus Torvalds
2aff7c706c Objtool changes for v6.4:
- Mark arch_cpu_idle_dead() __noreturn, make all architectures & drivers that did
    this inconsistently follow this new, common convention, and fix all the fallout
    that objtool can now detect statically.
 
  - Fix/improve the ORC unwinder becoming unreliable due to UNWIND_HINT_EMPTY ambiguity,
    split it into UNWIND_HINT_END_OF_STACK and UNWIND_HINT_UNDEFINED to resolve it.
 
  - Fix noinstr violations in the KCSAN code and the lkdtm/stackleak code.
 
  - Generate ORC data for __pfx code
 
  - Add more __noreturn annotations to various kernel startup/shutdown/panic functions.
 
  - Misc improvements & fixes.
 
 Signed-off-by: Ingo Molnar <mingo@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmRK1x0RHG1pbmdvQGtl
 cm5lbC5vcmcACgkQEnMQ0APhK1ghxQ/+IkCynMYtdF5OG9YwbcGJqsPSfOPMEcEM
 pUSFYg+gGPBDT/fJfcVSqvUtdnWbLC2kXt9yiswXz3X3J2nmNkBk5YKQftsNDcul
 TmKeqIIAK51XTncpegKH0EGnOX63oZ9Vxa8CTPdDlb+YF23Km2FoudGRI9F5qbUd
 LoraXqGYeiaeySkGyWmZVl6Uc8dIxnMkTN3H/oI9aB6TOrsi059hAtFcSaFfyemP
 c4LqXXCH7k2baiQt+qaLZ8cuZVG/+K5r2N2cmjO5kmJc6ynIaFnfMe4XxZLjp5LT
 /PulYI15bXkvSARKx5CRh/CDHMOx5Blw+ASO0RhWbdy0WH4ZhhcaVF5AeIpPW86a
 1LBcz97rMp72WmvKgrJeVO1r9+ll4SI6/YKGJRsxsCMdP3hgFpqntXyVjTFNdTM1
 0gH6H5v55x06vJHvhtTk8SR3PfMTEM2fRU5jXEOrGowoGifx+wNUwORiwj6LE3KQ
 SKUdT19RNzoW3VkFxhgk65ThK1S7YsJUKRoac3YdhttpqqqtFV//erenrZoR4k/p
 vzvKy68EQ7RCNyD5wNWNFe0YjeJl5G8gQ8bUm4Xmab7djjgz+pn4WpQB8yYKJLAo
 x9dqQ+6eUbw3Hcgk6qQ9E+r/svbulnAL0AeALAWK/91DwnZ2mCzKroFkLN7napKi
 fRho4CqzrtM=
 =NwEV
 -----END PGP SIGNATURE-----

Merge tag 'objtool-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull objtool updates from Ingo Molnar:

 - Mark arch_cpu_idle_dead() __noreturn, make all architectures &
   drivers that did this inconsistently follow this new, common
   convention, and fix all the fallout that objtool can now detect
   statically

 - Fix/improve the ORC unwinder becoming unreliable due to
   UNWIND_HINT_EMPTY ambiguity, split it into UNWIND_HINT_END_OF_STACK
   and UNWIND_HINT_UNDEFINED to resolve it

 - Fix noinstr violations in the KCSAN code and the lkdtm/stackleak code

 - Generate ORC data for __pfx code

 - Add more __noreturn annotations to various kernel startup/shutdown
   and panic functions

 - Misc improvements & fixes

* tag 'objtool-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
  x86/hyperv: Mark hv_ghcb_terminate() as noreturn
  scsi: message: fusion: Mark mpt_halt_firmware() __noreturn
  x86/cpu: Mark {hlt,resume}_play_dead() __noreturn
  btrfs: Mark btrfs_assertfail() __noreturn
  objtool: Include weak functions in global_noreturns check
  cpu: Mark nmi_panic_self_stop() __noreturn
  cpu: Mark panic_smp_self_stop() __noreturn
  arm64/cpu: Mark cpu_park_loop() and friends __noreturn
  x86/head: Mark *_start_kernel() __noreturn
  init: Mark start_kernel() __noreturn
  init: Mark [arch_call_]rest_init() __noreturn
  objtool: Generate ORC data for __pfx code
  x86/linkage: Fix padding for typed functions
  objtool: Separate prefix code from stack validation code
  objtool: Remove superfluous dead_end_function() check
  objtool: Add symbol iteration helpers
  objtool: Add WARN_INSN()
  scripts/objdump-func: Support multiple functions
  context_tracking: Fix KCSAN noinstr violation
  objtool: Add stackleak instrumentation to uaccess safe list
  ...
2023-04-28 14:02:54 -07:00
Linus Torvalds
7fa8a8ee94 - Nick Piggin's "shoot lazy tlbs" series, to improve the peformance of
switching from a user process to a kernel thread.
 
 - More folio conversions from Kefeng Wang, Zhang Peng and Pankaj Raghav.
 
 - zsmalloc performance improvements from Sergey Senozhatsky.
 
 - Yue Zhao has found and fixed some data race issues around the
   alteration of memcg userspace tunables.
 
 - VFS rationalizations from Christoph Hellwig:
 
   - removal of most of the callers of write_one_page().
 
   - make __filemap_get_folio()'s return value more useful
 
 - Luis Chamberlain has changed tmpfs so it no longer requires swap
   backing.  Use `mount -o noswap'.
 
 - Qi Zheng has made the slab shrinkers operate locklessly, providing
   some scalability benefits.
 
 - Keith Busch has improved dmapool's performance, making part of its
   operations O(1) rather than O(n).
 
 - Peter Xu adds the UFFD_FEATURE_WP_UNPOPULATED feature to userfaultd,
   permitting userspace to wr-protect anon memory unpopulated ptes.
 
 - Kirill Shutemov has changed MAX_ORDER's meaning to be inclusive rather
   than exclusive, and has fixed a bunch of errors which were caused by its
   unintuitive meaning.
 
 - Axel Rasmussen give userfaultfd the UFFDIO_CONTINUE_MODE_WP feature,
   which causes minor faults to install a write-protected pte.
 
 - Vlastimil Babka has done some maintenance work on vma_merge():
   cleanups to the kernel code and improvements to our userspace test
   harness.
 
 - Cleanups to do_fault_around() by Lorenzo Stoakes.
 
 - Mike Rapoport has moved a lot of initialization code out of various
   mm/ files and into mm/mm_init.c.
 
 - Lorenzo Stoakes removd vmf_insert_mixed_prot(), which was added for
   DRM, but DRM doesn't use it any more.
 
 - Lorenzo has also coverted read_kcore() and vread() to use iterators
   and has thereby removed the use of bounce buffers in some cases.
 
 - Lorenzo has also contributed further cleanups of vma_merge().
 
 - Chaitanya Prakash provides some fixes to the mmap selftesting code.
 
 - Matthew Wilcox changes xfs and afs so they no longer take sleeping
   locks in ->map_page(), a step towards RCUification of pagefaults.
 
 - Suren Baghdasaryan has improved mmap_lock scalability by switching to
   per-VMA locking.
 
 - Frederic Weisbecker has reworked the percpu cache draining so that it
   no longer causes latency glitches on cpu isolated workloads.
 
 - Mike Rapoport cleans up and corrects the ARCH_FORCE_MAX_ORDER Kconfig
   logic.
 
 - Liu Shixin has changed zswap's initialization so we no longer waste a
   chunk of memory if zswap is not being used.
 
 - Yosry Ahmed has improved the performance of memcg statistics flushing.
 
 - David Stevens has fixed several issues involving khugepaged,
   userfaultfd and shmem.
 
 - Christoph Hellwig has provided some cleanup work to zram's IO-related
   code paths.
 
 - David Hildenbrand has fixed up some issues in the selftest code's
   testing of our pte state changing.
 
 - Pankaj Raghav has made page_endio() unneeded and has removed it.
 
 - Peter Xu contributed some rationalizations of the userfaultfd
   selftests.
 
 - Yosry Ahmed has fixed an issue around memcg's page recalim accounting.
 
 - Chaitanya Prakash has fixed some arm-related issues in the
   selftests/mm code.
 
 - Longlong Xia has improved the way in which KSM handles hwpoisoned
   pages.
 
 - Peter Xu fixes a few issues with uffd-wp at fork() time.
 
 - Stefan Roesch has changed KSM so that it may now be used on a
   per-process and per-cgroup basis.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZEr3zQAKCRDdBJ7gKXxA
 jlLoAP0fpQBipwFxED0Us4SKQfupV6z4caXNJGPeay7Aj11/kQD/aMRC2uPfgr96
 eMG3kwn2pqkB9ST2QpkaRbxA//eMbQY=
 =J+Dj
 -----END PGP SIGNATURE-----

Merge tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull MM updates from Andrew Morton:

 - Nick Piggin's "shoot lazy tlbs" series, to improve the peformance of
   switching from a user process to a kernel thread.

 - More folio conversions from Kefeng Wang, Zhang Peng and Pankaj
   Raghav.

 - zsmalloc performance improvements from Sergey Senozhatsky.

 - Yue Zhao has found and fixed some data race issues around the
   alteration of memcg userspace tunables.

 - VFS rationalizations from Christoph Hellwig:
     - removal of most of the callers of write_one_page()
     - make __filemap_get_folio()'s return value more useful

 - Luis Chamberlain has changed tmpfs so it no longer requires swap
   backing. Use `mount -o noswap'.

 - Qi Zheng has made the slab shrinkers operate locklessly, providing
   some scalability benefits.

 - Keith Busch has improved dmapool's performance, making part of its
   operations O(1) rather than O(n).

 - Peter Xu adds the UFFD_FEATURE_WP_UNPOPULATED feature to userfaultd,
   permitting userspace to wr-protect anon memory unpopulated ptes.

 - Kirill Shutemov has changed MAX_ORDER's meaning to be inclusive
   rather than exclusive, and has fixed a bunch of errors which were
   caused by its unintuitive meaning.

 - Axel Rasmussen give userfaultfd the UFFDIO_CONTINUE_MODE_WP feature,
   which causes minor faults to install a write-protected pte.

 - Vlastimil Babka has done some maintenance work on vma_merge():
   cleanups to the kernel code and improvements to our userspace test
   harness.

 - Cleanups to do_fault_around() by Lorenzo Stoakes.

 - Mike Rapoport has moved a lot of initialization code out of various
   mm/ files and into mm/mm_init.c.

 - Lorenzo Stoakes removd vmf_insert_mixed_prot(), which was added for
   DRM, but DRM doesn't use it any more.

 - Lorenzo has also coverted read_kcore() and vread() to use iterators
   and has thereby removed the use of bounce buffers in some cases.

 - Lorenzo has also contributed further cleanups of vma_merge().

 - Chaitanya Prakash provides some fixes to the mmap selftesting code.

 - Matthew Wilcox changes xfs and afs so they no longer take sleeping
   locks in ->map_page(), a step towards RCUification of pagefaults.

 - Suren Baghdasaryan has improved mmap_lock scalability by switching to
   per-VMA locking.

 - Frederic Weisbecker has reworked the percpu cache draining so that it
   no longer causes latency glitches on cpu isolated workloads.

 - Mike Rapoport cleans up and corrects the ARCH_FORCE_MAX_ORDER Kconfig
   logic.

 - Liu Shixin has changed zswap's initialization so we no longer waste a
   chunk of memory if zswap is not being used.

 - Yosry Ahmed has improved the performance of memcg statistics
   flushing.

 - David Stevens has fixed several issues involving khugepaged,
   userfaultfd and shmem.

 - Christoph Hellwig has provided some cleanup work to zram's IO-related
   code paths.

 - David Hildenbrand has fixed up some issues in the selftest code's
   testing of our pte state changing.

 - Pankaj Raghav has made page_endio() unneeded and has removed it.

 - Peter Xu contributed some rationalizations of the userfaultfd
   selftests.

 - Yosry Ahmed has fixed an issue around memcg's page recalim
   accounting.

 - Chaitanya Prakash has fixed some arm-related issues in the
   selftests/mm code.

 - Longlong Xia has improved the way in which KSM handles hwpoisoned
   pages.

 - Peter Xu fixes a few issues with uffd-wp at fork() time.

 - Stefan Roesch has changed KSM so that it may now be used on a
   per-process and per-cgroup basis.

* tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (369 commits)
  mm,unmap: avoid flushing TLB in batch if PTE is inaccessible
  shmem: restrict noswap option to initial user namespace
  mm/khugepaged: fix conflicting mods to collapse_file()
  sparse: remove unnecessary 0 values from rc
  mm: move 'mmap_min_addr' logic from callers into vm_unmapped_area()
  hugetlb: pte_alloc_huge() to replace huge pte_alloc_map()
  maple_tree: fix allocation in mas_sparse_area()
  mm: do not increment pgfault stats when page fault handler retries
  zsmalloc: allow only one active pool compaction context
  selftests/mm: add new selftests for KSM
  mm: add new KSM process and sysfs knobs
  mm: add new api to enable ksm per process
  mm: shrinkers: fix debugfs file permissions
  mm: don't check VMA write permissions if the PTE/PMD indicates write permissions
  migrate_pages_batch: fix statistics for longterm pin retry
  userfaultfd: use helper function range_in_vma()
  lib/show_mem.c: use for_each_populated_zone() simplify code
  mm: correct arg in reclaim_pages()/reclaim_clean_pages_from_list()
  fs/buffer: convert create_page_buffers to folio_create_buffers
  fs/buffer: add folio_create_empty_buffers helper
  ...
2023-04-27 19:42:02 -07:00
Linus Torvalds
556eb8b791 Driver core changes for 6.4-rc1
Here is the large set of driver core changes for 6.4-rc1.
 
 Once again, a busy development cycle, with lots of changes happening in
 the driver core in the quest to be able to move "struct bus" and "struct
 class" into read-only memory, a task now complete with these changes.
 
 This will make the future rust interactions with the driver core more
 "provably correct" as well as providing more obvious lifetime rules for
 all busses and classes in the kernel.
 
 The changes required for this did touch many individual classes and
 busses as many callbacks were changed to take const * parameters
 instead.  All of these changes have been submitted to the various
 subsystem maintainers, giving them plenty of time to review, and most of
 them actually did so.
 
 Other than those changes, included in here are a small set of other
 things:
   - kobject logging improvements
   - cacheinfo improvements and updates
   - obligatory fw_devlink updates and fixes
   - documentation updates
   - device property cleanups and const * changes
   - firwmare loader dependency fixes.
 
 All of these have been in linux-next for a while with no reported
 problems.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZEp7Sw8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ykitQCfamUHpxGcKOAGuLXMotXNakTEsxgAoIquENm5
 LEGadNS38k5fs+73UaxV
 =7K4B
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here is the large set of driver core changes for 6.4-rc1.

  Once again, a busy development cycle, with lots of changes happening
  in the driver core in the quest to be able to move "struct bus" and
  "struct class" into read-only memory, a task now complete with these
  changes.

  This will make the future rust interactions with the driver core more
  "provably correct" as well as providing more obvious lifetime rules
  for all busses and classes in the kernel.

  The changes required for this did touch many individual classes and
  busses as many callbacks were changed to take const * parameters
  instead. All of these changes have been submitted to the various
  subsystem maintainers, giving them plenty of time to review, and most
  of them actually did so.

  Other than those changes, included in here are a small set of other
  things:

   - kobject logging improvements

   - cacheinfo improvements and updates

   - obligatory fw_devlink updates and fixes

   - documentation updates

   - device property cleanups and const * changes

   - firwmare loader dependency fixes.

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits)
  device property: make device_property functions take const device *
  driver core: update comments in device_rename()
  driver core: Don't require dynamic_debug for initcall_debug probe timing
  firmware_loader: rework crypto dependencies
  firmware_loader: Strip off \n from customized path
  zram: fix up permission for the hot_add sysfs file
  cacheinfo: Add use_arch[|_cache]_info field/function
  arch_topology: Remove early cacheinfo error message if -ENOENT
  cacheinfo: Check cache properties are present in DT
  cacheinfo: Check sib_leaf in cache_leaves_are_shared()
  cacheinfo: Allow early level detection when DT/ACPI info is missing/broken
  cacheinfo: Add arm64 early level initializer implementation
  cacheinfo: Add arch specific early level initializer
  tty: make tty_class a static const structure
  driver core: class: remove struct class_interface * from callbacks
  driver core: class: mark the struct class in struct class_interface constant
  driver core: class: make class_register() take a const *
  driver core: class: mark class_release() as taking a const *
  driver core: remove incorrect comment for device_create*
  MIPS: vpe-cmp: remove module owner pointer from struct class usage.
  ...
2023-04-27 11:53:57 -07:00
Linus Torvalds
736b378b29 slab changes for 6.4
-----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEe7vIQRWZI0iWSE3xu+CwddJFiJoFAmRCSGEACgkQu+CwddJF
 iJpA2wgAkwMP++Znd8JU3iQ4N53lv18euNuEMLTOY+jk7zXHvsRX8KyzLmsohUKO
 SSGVi1Om785AidOsJhARJawW7AWYuJ5l7ri+FyskTwrTUcMC4UZ/IT2tB22lRsXi
 0f3lgbdArZbj7aq7AVO9N7bh9rgVUHa/RHIwXzMp0sc9nekne9t+FFv7tyRnr7cc
 SMp/FdMZqbt9pVf0Uwud1BpdgER7QqQaSfaxITL7D2oJTePRZVWiXerrr4hMcQl1
 s6kgUgKdlaYmIx2N8eP1Nmp7undtwHo1C8dLLWKGCEuEAaXIxtXUtaUWFFmBDzH9
 Fv6qswNFcfwiLNPsY+xi9iA+vlGKAg==
 =T0EM
 -----END PGP SIGNATURE-----

Merge tag 'slab-for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab

Pull slab updates from Vlastimil Babka:
 "The main change is naturally the SLOB removal. Since its deprecation
  in 6.2 I've seen no complaints so hopefully SLUB_(TINY) works well for
  everyone and we can proceed.

  Besides the code cleanup, the main immediate benefit will be allowing
  kfree() family of function to work on kmem_cache_alloc() objects,
  which was incompatible with SLOB. This includes kfree_rcu() which had
  no kmem_cache_free_rcu() counterpart yet and now it shouldn't be
  necessary anymore.

  Besides that, there are several small code and comment improvements
  from Thomas, Thorsten and Vernon"

* tag 'slab-for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
  mm/slab: document kfree() as allowed for kmem_cache_alloc() objects
  mm/slob: remove slob.c
  mm/slab: remove CONFIG_SLOB code from slab common code
  mm, pagemap: remove SLOB and SLQB from comments and documentation
  mm, page_flags: remove PG_slob_free
  mm/slob: remove CONFIG_SLOB
  mm/slub: fix help comment of SLUB_DEBUG
  mm: slub: make kobj_type structure constant
  slab: Adjust comment after refactoring of gfp.h
2023-04-25 13:00:41 -07:00
Linus Torvalds
7ec85f3e08 printk changes for 6.4
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEESH4wyp42V4tXvYsjUqAMR0iAlPIFAmRGaygACgkQUqAMR0iA
 lPKlGBAAqn0yS8E2CP16Oo8nCB5AjoPVzohh6pQ6O8G0CFhvu47EKVTHPTa1BEFE
 YAz94geN5crpAmEcQyBcqkcJuLRXmYBOqE1x9M4PcCUUXTjcyYEzBYsOZO+j5jB7
 LUPX6jBbm2PpbT/e1ZSr90R8MhblVfBTD7DJHmXGhibYHj5D4KOwxQnhx8uWz9aT
 dgTWm1AgwEX85wUpXil5phD+YnvI/TxGlyV4AVOYh3y3K7Kc4CAeHFzCsg3h/Amr
 c2RR1dzvmMcEvg8lF3U9MsnVNF/2i0Tg9BXLRxSe1c20CKhtzNNPH5krPa3vHGeP
 P//FWDAd9S2hev54TN7LO92V+IsDh8nlU++HwRua50wflzJU/tkyWDtcmmlkGU6A
 hqtMUWE4libAaAW7FBJomRFirmEtEA4GwXN5WH3+B6htgVwKKrKhL9U/PtQtZxZ1
 GUEvtjmnBIfGndu7fHv70a1sLc9LuebOfmOQs3W6p6KUZkmL1Hqg1WGQoYwmUz4A
 bZRbCwMYNJCG4iO2jDmPU27D6tWMbQdt1kZ20svP6p3PRGy8EuI1C5tnO5Jhkw3E
 FCFudMMZEuZmBoztWWqEkZSfbMDlH6kc1+6+HMuCfSrpg6QD87TzO5CONIHCZyk9
 f3UD04R//BubTdiKQ4y/g6OwctihX7F8i3O71hTj5etuYqPs0nI=
 =t0d6
 -----END PGP SIGNATURE-----

Merge tag 'printk-for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux

Pull printk updates from Petr Mladek:

 - Code cleanup and dead code removal

* tag 'printk-for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
  printk: Remove obsoleted check for non-existent "user" object
  lib/vsprintf: Use isodigit() for the octal number check
  Remove orphaned CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT
2023-04-25 12:46:48 -07:00
Linus Torvalds
bc1bb2a49b - Add the necessary glue so that the kernel can run as a confidential
SEV-SNP vTOM guest on Hyper-V. A vTOM guest basically splits the
   address space in two parts: encrypted and unencrypted. The use case
   being running unmodified guests on the Hyper-V confidential computing
   hypervisor
 
 - Double-buffer messages between the guest and the hardware PSP device
   so that no partial buffers are copied back'n'forth and thus potential
   message integrity and leak attacks are possible
 
 - Name the return value the sev-guest driver returns when the hw PSP
   device hasn't been called, explicitly
 
 - Cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmRGl8gACgkQEsHwGGHe
 VUoEDhAAiw4+2nZR7XUJ7pewlXG7AJJZsVIpzzcF6Gyymn0LFCyMnP7O3snmFqzz
 aik0q2LzWrmDQ3Nmmzul0wtdsuW7Nik6BP9oF3WnB911+gGbpXyNWZ8EhOPNzkUR
 9D8Sp6f0xmqNE3YuzEpanufiDswgUxi++DRdmIRAs1TTh4bfUFWZcib1pdwoqSmR
 oS3UfVwVZ4Ee2Qm1f3n3XQ0FUpsjWeARPExUkLEvd8XeonTP+6aGAdggg9MnPcsl
 3zpSmOpuZ6VQbDrHxo3BH9HFuIUOd6S9PO++b9F6WxNPGEMk7fHa7ahOA6HjhgVz
 5Da3BN16OS9j64cZsYHMPsBcd+ja1YmvvZGypsY0d6X4d3M1zTPW+XeLbyb+VFBy
 SvA7z+JuxtLKVpju65sNiJWw8ZDTSu+eEYNDeeGLvAj3bxtclJjcPdMEPdzxmC5K
 eAhmRmiFuVM4nXMAR6cspVTsxvlTHFtd5gdm6RlRnvd7aV77Zl1CLzTy8IHTVpvI
 t7XTbtjEjYc0pI6cXXptHEOnBLjXUMPcqgGFgJYEauH6EvrxoWszUZD0tS3Hw80A
 K+Rwnc70ubq/PsgZcF4Ayer1j49z1NPfk5D4EA7/ChN6iNhQA8OqHT1UBrHAgqls
 2UAwzE2sQZnjDvGZghlOtFIQUIhwue7m93DaRi19EOdKYxVjV6U=
 =ZAw9
 -----END PGP SIGNATURE-----

Merge tag 'x86_sev_for_v6.4_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 SEV updates from Borislav Petkov:

 - Add the necessary glue so that the kernel can run as a confidential
   SEV-SNP vTOM guest on Hyper-V. A vTOM guest basically splits the
   address space in two parts: encrypted and unencrypted. The use case
   being running unmodified guests on the Hyper-V confidential computing
   hypervisor

 - Double-buffer messages between the guest and the hardware PSP device
   so that no partial buffers are copied back'n'forth and thus potential
   message integrity and leak attacks are possible

 - Name the return value the sev-guest driver returns when the hw PSP
   device hasn't been called, explicitly

 - Cleanups

* tag 'x86_sev_for_v6.4_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/hyperv: Change vTOM handling to use standard coco mechanisms
  init: Call mem_encrypt_init() after Hyper-V hypercall init is done
  x86/mm: Handle decryption/re-encryption of bss_decrypted consistently
  Drivers: hv: Explicitly request decrypted in vmap_pfn() calls
  x86/hyperv: Reorder code to facilitate future work
  x86/ioremap: Add hypervisor callback for private MMIO mapping in coco VM
  x86/sev: Change snp_guest_issue_request()'s fw_err argument
  virt/coco/sev-guest: Double-buffer messages
  crypto: ccp: Get rid of __sev_platform_init_locked()'s local function pointer
  crypto: ccp - Name -1 return value as SEV_RET_NO_FW_CALL
2023-04-25 10:48:08 -07:00
Linus Torvalds
3323ddce08 v6.4/kernel.user_worker
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZEEvmQAKCRCRxhvAZXjc
 omUmAP0YaHa0gGgC1HEqZUpr0wRCo9WCyDCIZh3CYHUsgSwtvAD/Skl3jeWPPhlm
 pmRA2DDxmwYFP3vhhFMjP+Z6AuUpEQQ=
 =9XpZ
 -----END PGP SIGNATURE-----

Merge tag 'v6.4/kernel.user_worker' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux

Pull user work thread updates from Christian Brauner:
 "This contains the work generalizing the ability to create a kernel
  worker from a userspace process.

  Such user workers will run with the same credentials as the userspace
  process they were created from providing stronger security and
  accounting guarantees than the traditional override_creds() approach
  ever could've hoped for.

  The original work was heavily based and optimzed for the needs of
  io_uring which was the first user. However, as it quickly turned out
  the ability to create user workers inherting properties from a
  userspace process is generally useful.

  The vhost subsystem currently creates workers using the kthread api.
  The consequences of using the kthread api are that RLIMITs don't work
  correctly as they are inherited from khtreadd. This leads to bugs
  where more workers are created than would be allowed by the RLIMITs of
  the userspace process in lieu of which workers are created.

  Problems like this disappear with user workers created from the
  userspace processes for which they perform the work. In addition,
  providing this api allows vhost to remove additional complexity. For
  example, cgroup and mm sharing will just work out of the box with user
  workers based on the relevant userspace process instead of manually
  ensuring the correct cgroup and mm contexts are used.

  So the vhost subsystem should simply be made to use the same mechanism
  as io_uring. To this end the original mechanism used for
  create_io_thread() is generalized into user workers:

   - Introduce PF_USER_WORKER as a generic indicator that a given task
     is a user worker, i.e., a kernel task that was created from a
     userspace process. Now a PF_IO_WORKER thread is just a specialized
     version of PF_USER_WORKER. So io_uring io workers raise both flags.

   - Make copy_process() available to core kernel code

   - Extend struct kernel_clone_args with the following bitfields
     allowing to indicate to copy_process():
       - to create a user worker (raise PF_USER_WORKER)
       - to not inherit any files from the userspace process
       - to ignore signals

  After all generic changes are in place the vhost subsystem implements
  a new dedicated vhost api based on user workers. Finally, vhost is
  switched to rely on the new api moving it off of kthreads.

  Thanks to Mike for sticking it out and making it through this rather
  arduous journey"

* tag 'v6.4/kernel.user_worker' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  vhost: use vhost_tasks for worker threads
  vhost: move worker thread fields to new struct
  vhost_task: Allow vhost layer to use copy_process
  fork: allow kernel code to call copy_process
  fork: Add kernel_clone_args flag to ignore signals
  fork: add kernel_clone_args flag to not dup/clone files
  fork/vm: Move common PF_IO_WORKER behavior to new flag
  kernel: Make io_thread and kthread bit fields
  kthread: Pass in the thread's name during creation
  kernel: Allow a kernel thread's name to be set in copy_process
  csky: Remove kernel_thread declaration
2023-04-24 12:52:35 -07:00
Linus Torvalds
0da6e5fd6c gcc: disable '-Warray-bounds' for gcc-13 too
We started disabling '-Warray-bounds' for gcc-12 originally on s390,
because it resulted in some warnings that weren't realistically fixable
(commit 8b202ee218: "s390: disable -Warray-bounds").

That s390-specific issue was then found to be less common elsewhere, but
generic (see f0be87c42c: "gcc-12: disable '-Warray-bounds' universally
for now"), and then later expanded the version check was expanded to
gcc-11 (5a41237ad1: "gcc: disable -Warray-bounds for gcc-11 too").

And it turns out that I was much too optimistic in thinking that it's
all going to go away, and here we are with gcc-13 showing all the same
issues.  So instead of expanding this one version at a time, let's just
disable it for gcc-11+, and put an end limit to it only when we actually
find a solution.

Yes, I'm sure some of this is because the kernel just does odd things
(like our "container_of()" use, but also knowingly playing games with
things like linker tables and array layouts).

And yes, some of the warnings are likely signs of real bugs, but when
there are hundreds of false positives, that doesn't really help.

Oh well.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-04-23 09:56:20 -07:00
Benjamin Gray
735faf92fb init/initramfs: Fix argument forwarding to panic() in panic_show_mem()
Forwarding variadic argument lists can't be done by passing a va_list
to a function with signature foo(...) (as panic() has). It ends up
interpreting the va_list itself as a single argument instead of
iterating it. printf() happily accepts it of course, leading to corrupt
output.

Convert panic_show_mem() to a macro to allow forwarding the arguments.
The function is trivial enough that it's easier than trying to introduce
a vpanic() variant.

Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-04-16 17:37:01 +09:00
Josh Poimboeuf
25a6917ca6 init: Mark start_kernel() __noreturn
Now that arch_call_rest_init() is __noreturn, mark its caller
start_kernel() __noreturn.

Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/7069acf026a195f26a88061227fba5a3b0337b9a.1681342859.git.jpoimboe@kernel.org
2023-04-14 17:31:23 +02:00