Check return code of syscall_trace_enter(), and skip syscall
if -1. Return code will be left at what had been set by
ptrace or seccomp (in regs->d0).
No regression seen in testing with strace on ARAnyM.
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20230112035529.13521-2-schmitzmic@gmail.com
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
The objects placed at the head of vmlinux need special treatments:
- arch/$(SRCARCH)/Makefile adds them to head-y in order to place
them before other archives in the linker command line.
- arch/$(SRCARCH)/kernel/Makefile adds them to extra-y instead of
obj-y to avoid them going into built-in.a.
This commit gets rid of the latter.
Create vmlinux.a to collect all the objects that are unconditionally
linked to vmlinux. The objects listed in head-y are moved to the head
of vmlinux.a by using 'ar m'.
With this, arch/$(SRCARCH)/kernel/Makefile can consistently use obj-y
for builtin objects.
There is no *.o that is directly linked to vmlinux. Drop unneeded code
in scripts/clang-tools/gen_compile_commands.py.
$(AR) mPi needs 'T' to workaround the llvm-ar bug. The fix was suggested
by Nathan Chancellor [1].
[1]: https://lore.kernel.org/llvm/YyjjT5gQ2hGMH0ni@dev-arch.thelio-3990X/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
comments "the the" should be replaced by "of the" instead.
Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Fix sparse warnings:
arch/m68k/coldfire/m523x.c:31:19: sparse: sparse: symbol 'm523x_clk_lookup' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Jingjin <wangjingjin1@huawei.com>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
When CAN_FLEXCAN=y and M5441x is not set/enabled, there are build
errors in coldfire/device.c:
../arch/m68k/coldfire/device.c:595:26: error: 'MCFFLEXCAN_BASE0' undeclared here (not in a function); did you mean 'MCFDMA_BASE0'?
595 | .start = MCFFLEXCAN_BASE0,
../arch/m68k/coldfire/device.c:596:43: error: 'MCFFLEXCAN_SIZE' undeclared here (not in a function)
596 | .end = MCFFLEXCAN_BASE0 + MCFFLEXCAN_SIZE,
../arch/m68k/coldfire/device.c:600:26: error: 'MCF_IRQ_IFL0' undeclared here (not in a function); did you mean 'MCF_IRQ_I2C0'?
600 | .start = MCF_IRQ_IFL0,
../arch/m68k/coldfire/device.c:605:26: error: 'MCF_IRQ_BOFF0' undeclared here (not in a function); did you mean 'MCF_IRQ_I2C0'?
605 | .start = MCF_IRQ_BOFF0,
../arch/m68k/coldfire/device.c:610:26: error: 'MCF_IRQ_ERR0' undeclared here (not in a function); did you mean 'MCF_IRQ_I2C0'?
610 | .start = MCF_IRQ_ERR0,
Protect the FLEXCAN code blocks by checking if MCFFLEXCAN_SIZE
is defined.
Fixes: 35a9f9363a ("m68k: m5441x: add flexcan support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: linux-m68k@lists.linux-m68k.org
Cc: uclinux-dev@uclinux.org
Cc: Angelo Dureghello <angelo@kernel-space.org>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Various spelling mistakes in comments.
Detected with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
After a build regression report, I took a look at possible users of
CONFIG_ISA_DMA_API on m68k and found none, which Greg confirmed. The
CONFIG_GENERIC_ISA_DMA option in turn is only needed to implement
ISA_DMA_API, and is clearly not used on the platforms with ISA support.
The CONFIG_ISA support for AMIGA_PCMCIA is probably also unneeded,
but this is less clear. Unlike other PCMCIA implementations, this one
does not use the drivers/pcmcia subsystem at all and just supports
the "apne" network driver. When it was first added, one could use
ISA drivers on it as well, but this probably broke at some point.
With no reason to keep this, let's just drop the corresponding files
and prevent the remaining ISA drivers that use this from getting built.
The remaining definitions in asm/dma.h are used for PCI support.
Link: https://lore.kernel.org/lkml/9e5ee1c3-ca80-f343-a1f5-66f3dd1c0727@linux-m68k.org/
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
Acked-by: Greg Ungerer <gerg@linux-m68k.org>
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
When CONFIG_MCF_EDMA is set (due to COMPILE_TEST, not due to
CONFIG_M5441x), coldfire/device.c has compile errors due to
missing MCFEDMA_* symbols. In the .config file that was provided,
CONFIG_M5206=y, not CONFIG_M5441x, so <asm/m5441xsim.h> is not
included in coldfire/device.c.
Only build the MCF_EDMA code in coldfire/device.c if the MCFEDMA_*
hardware macros are defined.
Fixes these build errors:
../arch/m68k/coldfire/device.c:512:35: error: 'MCFEDMA_BASE' undeclared here (not in a function); did you mean 'MCFDMA_BASE1'?
512 | .start = MCFEDMA_BASE,
../arch/m68k/coldfire/device.c:513:50: error: 'MCFEDMA_SIZE' undeclared here (not in a function)
513 | .end = MCFEDMA_BASE + MCFEDMA_SIZE - 1,
../arch/m68k/coldfire/device.c:517:35: error: 'MCFEDMA_IRQ_INTR0' undeclared here (not in a function)
517 | .start = MCFEDMA_IRQ_INTR0,
../arch/m68k/coldfire/device.c:523:35: error: 'MCFEDMA_IRQ_INTR16' undeclared here (not in a function)
523 | .start = MCFEDMA_IRQ_INTR16,
../arch/m68k/coldfire/device.c:529:35: error: 'MCFEDMA_IRQ_INTR56' undeclared here (not in a function)
529 | .start = MCFEDMA_IRQ_INTR56,
../arch/m68k/coldfire/device.c:535:35: error: 'MCFEDMA_IRQ_ERR' undeclared here (not in a function)
535 | .start = MCFEDMA_IRQ_ERR,
Fixes: d7e9d01ac2 ("m68k: add ColdFire mcf5441x eDMA platform support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Link: lore.kernel.org/r/202203030252.P752DK46-lkp@intel.com
Cc: Angelo Dureghello <angelo@sysam.it>
Cc: Greg Ungerer <gerg@kernel.org>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: linux-m68k@lists.linux-m68k.org
Cc: uclinux-dev@uclinux.org
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Add a m68k-only set_fc helper to set the SFC and DFC registers for the
few places that need to override it for special MM operations, but
disconnect that from the deprecated kernel-wide set_fs() API.
Note that the SFC/DFC registers are context switched, so there is no need
to disable preemption.
Partially based on an earlier patch from
Linus Torvalds <torvalds@linux-foundation.org>.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Michael Schmitz <schmitzmic@gmail.com>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Link: https://lore.kernel.org/r/20210916070405.52750-7-hch@lst.de
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
sigreturn has to deal with an unpleasant problem - exception stack frames
have different sizes, depending upon the exception (and processor model, as
well) and variable-sized part of exception frame may contain information
needed for instruction restart. So when signal handler terminates and calls
sigreturn to resume the execution at the place where we'd been when we caught
the signal, it has to rearrange the frame at the bottom of kernel stack.
Worse, it might need to open a gap in the kernel stack, shifting pt_regs
towards lower addresses.
Doing that from C is insane - we'd need to shift stack frames (return addresses,
local variables, etc.) of C call chain, right under the nose of compiler and
hope it won't fall apart horribly. What had been actually done is only slightly
less insane - an inline asm in mangle_kernel_stack() moved the stuff around,
then reset stack pointer and jumped to label in asm glue.
However, we can avoid all that mess if the asm wrapper we have to use anyway
would reserve some space on the stack between switch_stack and the C stack
frame of do_{rt_,}sigreturn(). Then C part can simply memmove() pt_regs +
switch_stack, memcpy() the variable part of exception frame into the opened
gap - all of that without inline asm, buggering C call chain, magical jumps
to asm labels, etc.
Asm wrapper would need to know where the moved switch_stack has ended up -
it might have been shifted into the gap we'd reserved before do_rt_sigreturn()
call. That's where it needs to set the stack pointer to. So let the C part
return just that and be done with that.
While we are at it, the call of berr_040cleanup() we need to do when
returning via 68040 bus error exception frame can be moved into C part
as well.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Michael Schmitz <schmitzmic@gmail.com>
Tested-by: Finn Thain <fthain@linux-m68k.org>
Link: https://lore.kernel.org/r/YP2dTQPm1wGPWFgD@zeniv-ca.linux.org.uk
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
The clk_enable is supposed work when CONFIG_HAVE_CLK is false, but it
returns -EINVAL. That means some drivers fail during probe.
[ 1.680000] flexcan: probe of flexcan.0 failed with error -22
Fixes: c1fb1bf64b ("m68k: let clk_enable() return immediately if clk is NULL")
Fixes: bea8bcb12d ("m68knommu: Add support for the Coldfire m5441x.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Add flexcan support.
Signed-off-by: Angelo Dureghello <angelo@kernel-space.org>
Made the flexcan resource inclusion conditional based on the enablement
of the flexcan driver. This commit is no longer dependant on the
presence of the updated driver in mainline.
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
DEFINE_CLK() makes the variable name be clk_xyz, so variable
'pll' should instead be 'clk_pll'.
In file included from ../arch/m68k/coldfire/m525x.c:12:
../arch/m68k/coldfire/m525x.c:29:30: error: 'pll' undeclared here (not in a function)
29 | CLKDEV_INIT(NULL, "pll.0", &pll),
| ^~~
../include/linux/clkdev.h:30:10: note: in definition of macro 'CLKDEV_INIT'
30 | .clk = c, \
| ^
In file included from ../arch/m68k/coldfire/m525x.c:21:
../arch/m68k/include/asm/mcfclk.h:43:27: warning: 'clk_pll' defined but not used [-Wunused-variable]
43 | static struct clk clk_##clk_ref = { \
| ^~~~
../arch/m68k/coldfire/m525x.c:25:1: note: in expansion of macro 'DEFINE_CLK'
25 | DEFINE_CLK(pll, "pll.0", MCF_CLK);
| ^~~~~~~~~~
Fixes: 63aadb7766 ("m68k: coldfire: use clkdev_lookup on most coldfire")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: linux-m68k@lists.linux-m68k.org
Cc: uclinux-dev@uclinux.org
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Only three SoCs remain that use the custom clk_get/clk_put.
Move these over to clkdev_lookup tables as well. As before,
treat the "sys.0" and "pll.0" clocks as system-wide clocks,
and all the other ones as device specific.
The "name" field in 'struct clock' is now unused, so rename
that as well as a cleanup and to reduce the object code size.
The DEFINE_CLK macro could be changed the same way, but it
is less churn to just leave those in place, that can be
done as a follow-up later if someone is interested.
Acked-by: Greg Ungerer <gerg@linux-m68k.org>
Tested-by: Greg Ungerer <gerg@linux-m68k.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Coldfire is now the only target that implements the clk_get()/clk_put()
helpers itself rather than using the common implementation.
Most coldfire variants only have two distinct clocks and use the clk
code purely for lookup. Change those over to use clkdev_lookup instead
but leave the custom clk interface for those two clocks.
Also leave the four SoCs that have gated clocks.
Acked-by: Greg Ungerer <gerg@linux-m68k.org>
Tested-by: Greg Ungerer <gerg@linux-m68k.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Working on flexcan0, there was no way to have irq 128 working.
Fix irq 128 and 196 setup.
Signed-off-by: Angelo Dureghello <angelo@kernel-space.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Similar to commit<742859adc721>("m68k: let clk_disable() return immediately if clk is NULL").
there should be a check for clk to prevent NULL pointer dereference.
Signed-off-by: Defang Bo <bodefang@126.com>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
This gets passed to a number of init functions, but is
ignored everywhere, so remove the function and change the
mach_sched_init callback to take no arguments.
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Replace the indirect function calls in the timer code
with direct calls to the newly added legacy_timer_tick()
helper for those that have not yet been converted to
generic clockevents.
This makes the timer code a little more self-contained.
Tested-by: Greg Ungerer <gerg@linux-m68k.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The mere fact that the kernel has the MMC subsystem enabled (CONFIG_MMC
enabled) does not mean that the underlying hardware platform has the
SDHC hardware present. Within the ColdFire hardware defines that is
signified by MCFSDHC_BASE being defined with an address.
The platform data for the ColdFire parts is including the SDHC hardware
if CONFIG_MMC is enabled, instead of MCFSDHC_BASE. This means that if
you are compiling for a ColdFire target that does not support SDHC but
enable CONFIG_MMC you will fail to compile with errors like this:
arch/m68k/coldfire/device.c:565:12: error: ‘MCFSDHC_BASE’ undeclared here (not in a function)
.start = MCFSDHC_BASE,
^
arch/m68k/coldfire/device.c:566:25: error: ‘MCFSDHC_SIZE’ undeclared here (not in a function)
.end = MCFSDHC_BASE + MCFSDHC_SIZE - 1,
^
arch/m68k/coldfire/device.c:569:12: error: ‘MCF_IRQ_SDHC’ undeclared here (not in a function)
.start = MCF_IRQ_SDHC,
^
Make the SDHC platform support depend on MCFSDHC_BASE, that is only
include it if the specific ColdFire SoC has that hardware module.
Fixes: 991f5c4dd2 ("m68k: mcf5441x: add support for esdhc mmc controller")
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Angelo Dureghello <angelo.dureghello@timesys.com>
Tested-by: Angelo Dureghello <angelo.dureghello@timesys.com>
Fixes include:
. casting clean up in the user access macros
. memory leak on error case fix for PCI probing
. update of a defconfig.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEmsfM6tQwfNjBOxr3TiQVqaG9L4AFAl7huk8ACgkQTiQVqaG9
L4C1jQ/+P6rtN1H+c9uBqWpfsqrvhc7wOeaFd3JL9kgSSEdWI7SRyJQobpl95WNZ
J2rtcANZD1qrx0cXnQP30TOq4Pap++9H0H1rNj930YJzA23wDrlbWta3OlqFyzGK
uFSKdAjADjyUzGUOdtpGW4g4nG3cv2BjO3vSCit12KMI1KHmhdaAlG6UOFr22drS
Yg3Z+SfPtkNv2okUNVdZ4gPbt/TGGfKHKIBbqE2YxQ0qRymsoMEbBOUpz71vfNKX
igYS+yf5r9Wm8oMRjAN61g0Jm/0hvs7s3IicOw/FVewK6m3IkIKIpXpKQ7gtEknd
USlnFpkdd9YJE/+qxCbEtJ6VwQBXno5EPRK79xhuW2WNaoPDZtlRDNtmMBD4CdDt
A/EyOBcC4//KIyUQvOEiS/He/iHN58T//XW8SgF2fpMRKgLGVqf7tttIDutjgPp2
36KWBmdPW42EhFFLdIKYBqlPnysZR0O/2cLyMpHAu4206Z59Qzupaqrq0/v8ITzA
UQ8eVaTTE9dMI40orrBsnMNCS309XkeVYVhUE6UN95KRpL1tvfI4fLqV/98tjBT8
2FXmj73OM75sMUketCQF3cSehPaGC5xhwLDrZXk47vNcob9n+bexy4wD5vGe6+kM
a5Fe2oKaIqBDsYCwtvRoJ0qB52uqWZu6FIudbfTJVORg3GmvWt8=
=/4NZ
-----END PGP SIGNATURE-----
Merge tag 'm68knommu-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu updates from Greg Ungerer:
- casting clean up in the user access macros
- memory leak on error case fix for PCI probing
- update of a defconfig
* tag 'm68knommu-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k,nommu: fix implicit cast from __user in __{get,put}_user_asm()
m68k,nommu: add missing __user in uaccess' __ptr() macro
m68k: Drop CONFIG_MTD_M25P80 in stmark2_defconfig
m68k/PCI: Fix a memory leak in an error handling path
request_irq() is preferred over setup_irq(). Invocations of setup_irq()
occur after memory allocators are ready.
Per tglx[1], setup_irq() existed in olden days when allocators were not
ready by the time early interrupts were initialized.
Hence replace setup_irq() by request_irq().
[1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos
Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>
Tested-by: Greg Ungerer <gerg@linux-m68k.org>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
CONFIG_PREEMPTION is selected by CONFIG_PREEMPT and by CONFIG_PREEMPT_RT.
Both PREEMPT and PREEMPT_RT require the same functionality which today
depends on CONFIG_PREEMPT.
Switch the entry code over to use CONFIG_PREEMPTION.
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: linux-m68k@lists.linux-m68k.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
The Coldfire GPIO driver needs to explicitly incldue the
GPIO driver header since it is providing a driver.
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation version 2 of the license this program
is distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 100 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141900.918357685@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 3029 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull m68knommu update from Greg Ungerer:
"Only a single change to provide platform side support for the eDMA
hardware module on the ColdFire MCF5441X SoC"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: add ColdFire mcf5441x eDMA platform support
All users of the fixed_phy_add() pass -1 as GPIO number
to the fixed phy driver, and all users of fixed_phy_register()
pass -1 as GPIO number as well, except for the device
tree MDIO bus.
Any new users should create a proper device and pass the
GPIO as a descriptor associated with the device so delete
the GPIO argument from the calls and drop the code looking
requesting a GPIO in fixed_phy_add().
In fixed phy_register(), investigate the "fixed-link"
node and pick the GPIO descriptor from "link-gpios" if
this property exists. Move the corresponding code out
of of_mdio.c as the fixed phy code anyways requires
OF to be in use.
Tested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move remaining definitions and declarations from include/linux/bootmem.h
into include/linux/memblock.h and remove the redundant header.
The includes were replaced with the semantic patch below and then
semi-automated removal of duplicated '#include <linux/memblock.h>
@@
@@
- #include <linux/bootmem.h>
+ #include <linux/memblock.h>
[sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h]
Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au
[sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h]
Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au
[sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal]
Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au
Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Coldfire still provides its own variant of the clk API rather than using
the generic COMMON_CLK API. This generally works, but it causes some
link errors with drivers using the clk_round_rate(), clk_set_rate(),
clk_set_parent(), or clk_get_parent() functions when a platform lacks
those interfaces.
This adds empty stub implementations for each of them, and I don't even
try to do something useful here but instead just print a WARN() message
to make it obvious what is going on if they ever end up being called.
The drivers that call these won't be used on these platforms (otherwise
we'd get a link error today), so the added code is harmless bloat and
will warn about accidental use.
Based on commit bd7fefe1f0 ("ARM: w90x900: normalize clk API").
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
The ColdFire PCI configuration space access functions swap addressing
regions to do their work. Just letting the read/write cycles exit
the CPU core (via the ColdFire "nop" instruction) is not enough to
guarantee that the address region remapping has actually completed.
Insert a read back of the mapping register to be absolutely sure
that the remapping has completed.
This fixes an occasional boot hang during the ColdFire PCI initialization
phase.
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Reviewed-by: Angelo Dureghello <angelo@sysam.it>
Tested-by: Angelo Dureghello <angelo@sysam.it>
All the ColdFire IO access support code has been moved to io_no.h.
This means that all ColdFire support is at least now consistent no
matter whether the MMU is enabled or not for them.
Now that io_mm.h has reverted to only support the traditional m68k MMU
enabled processors we can remove the ColdFire specific definitions.
We can also remove the old ColdFire PCI bus IO access functions.
The new io_no.h uses asm-generic/io.h to provide all the basic support.
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Reviewed-by: Angelo Dureghello <angelo@sysam.it>
Tested-by: Angelo Dureghello <angelo@sysam.it>
As of commit 205e1b7f51 ("dma-mapping: warn when there is no
coherent_dma_mask") the Freescale FEC driver is issuing the following
warning on driver initialization on ColdFire systems:
WARNING: CPU: 0 PID: 1 at ./include/linux/dma-mapping.h:516 0x40159e20
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted 4.16.0-rc7-dirty #4
Stack from 41833dd8:
41833dd8 40259c53 40025534 40279e26 00000003 00000000 4004e514 41827000
400255de 40244e42 00000204 40159e20 00000009 00000000 00000000 4024531d
40159e20 40244e42 00000204 00000000 00000000 00000000 00000007 00000000
00000000 40279e26 4028d040 40226576 4003ae88 40279e26 418273f6 41833ef8
7fffffff 418273f2 41867028 4003c9a2 4180ac6c 00000004 41833f8c 4013e71c
40279e1c 40279e26 40226c16 4013ced2 40279e26 40279e58 4028d040 00000000
Call Trace:
[<40025534>] 0x40025534
[<4004e514>] 0x4004e514
[<400255de>] 0x400255de
[<40159e20>] 0x40159e20
[<40159e20>] 0x40159e20
It is not fatal, the driver and the system continue to function normally.
As per the warning the coherent_dma_mask is not set on this device.
There is nothing special about the DMA memory coherency on this hardware
so we can just set the mask to 32bits in the platform data for the FEC
ethernet devices.
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Add support for Sysam stmark2 board, an open hardware embedded
Linux board, see http://sysam.it/cff_stmark2.html for any info.
Signed-off-by: Angelo Dureghello <angelo@sysam.it>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
This patch adds initial module base address and irq for dspi0.
It also defines the dspi0 clock to be used by the Freescale driver.
Signed-off-by: Angelo Dureghello <angelo@sysam.it>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
The M54[78]x ColdFire parts are not the only members of the ColdFire family
that have an MMU. But currently some of the early MMU initialization code
is inside the startup code specific to only the ColdFire M54[78]x parts.
Move that early ColdFire MMU init code so that it is run for other ColdFire
parts running with MMU enabled.
Specifically this means that the MMU initialization code will now also be
run for the ColdFire M5441x parts when running with MMU enabled.
The code move meant that the extern definition for the mmu_context_init()
function had to be moved as well. To make it clear that is ColdFire specific
I have renamed that with a "cf_" in front of it and put its extern definition
in the mcfmmu.h (which is already included by the setup code).
Reported-by: Angelo Dureghello <angelo@sysam.it>
Tested-by: Angelo Dureghello <angelo@sysam.it>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull m68knommu updates from Greg Ungerer:
"Only two changes. One removes unused code, the other makes local clock
code arguments consistent with generic clock code"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68knommu: remove dead code
m68k: allow NULL clock for clk_get_rate
As CONFIG_RTC_DRV_M5441x doesn't exist because the driver never made it
upstream, there is no device to register. Remove code that is never
compiled and init_BSP() as it doesn't do anything.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Make the behaviour of clk_get_rate consistent with common clk's
clk_get_rate by accepting NULL clocks as parameter. Some device
drivers rely on this, and will cause an OOPS otherwise.
Fixes: facdf0ed4f ("m68knommu: introduce basic clk infrastructure")
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: linux-m68k@lists.linux-m68k.org
Cc: linux-kernel@vger.kernel.org
Reported-by: Mathias Kresin <dev@kresin.me>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
The pci_fixup_irqs() function allocates IRQs for all PCI devices present in
a system; those PCI devices possibly belong to different PCI bus trees (and
possibly rooted at different host bridges) and may well be enabled (ie
probed and bound to a driver) by the time pci_fixup_irqs() is called when
probing a given host bridge driver.
Furthermore, current kernel code relying on pci_fixup_irqs() to assign
legacy PCI IRQs to devices does not work at all for hotplugged devices in
that the code carrying out the IRQ fixup is called at host bridge driver
probe time, which just cannot take into account devices hotplugged after
the system has booted.
The introduction of map/swizzle function hooks in struct pci_host_bridge
allows us to define per-bridge map/swizzle functions that can be used at
device probe time in PCI core code to allocate IRQs for a given device
(through pci_assign_irq()).
Convert PCI host bridge initialization code to the
pci_scan_root_bus_bridge() API (that allows to pass a struct
pci_host_bridge with initialized map/swizzle pointers) and remove the
pci_fixup_irqs() call from arch code.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Make the code like the rest of the kernel.
Link: http://lkml.kernel.org/r/14db9c166d5b68efa77e337cfe49bb9b29bca3f7.1499284835.git.joe@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Greg Ungerer <gerg@linux-m68k.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In preparation for making the clockevents core NTP correction aware,
all clockevent device drivers must set ->min_delta_ticks and
->max_delta_ticks rather than ->min_delta_ns and ->max_delta_ns: a
clockevent device's rate is going to change dynamically and thus, the
ratio of ns to ticks ceases to stay invariant.
Make the m68k arch's coldfire clockevent driver initialize these fields
properly.
This patch alone doesn't introduce any change in functionality as the
clockevents core still looks exclusively at the (untouched) ->min_delta_ns
and ->max_delta_ns. As soon as this has changed, a followup patch will
purge the initialization of ->min_delta_ns and ->max_delta_ns from this
driver.
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Greg Ungerer <gerg@linux-m68k.org>
CC: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: linux-m68k@lists.linux-m68k.org
Acked-by: Greg Ungerer <gerg@linux-m68k.org>
Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
