According to 82093AA (IOAPIC) manual, Remote IRR and Delivery Status are
read-only. QEMU implements the bits as RO in commit 479c2a1cb7fb
("ioapic: keep RO bits for IOAPIC entry").
Signed-off-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Wanpeng Li <wanpeng.li@hotmail.com>
Reviewed-by: Steve Rutherford <srutherford@google.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Some OSes (Linux, Xen) use this behavior to clear the Remote IRR bit for
IOAPICs without an EOI register. They simulate the EOI message manually
by changing the trigger mode to edge and then back to level, with the
entry being masked during this.
QEMU implements this feature in commit ed1263c363c9
("ioapic: clear remote irr bit for edge-triggered interrupts")
As a side effect, this commit removes an incorrect behavior where Remote
IRR was cleared when the redirection table entry was rewritten. This is not
consistent with the manual and also opens an opportunity for a strange
behavior when a redirection table entry is modified from an interrupt
handler that handles the same entry: The modification will clear the
Remote IRR bit even though the interrupt handler is still running.
Signed-off-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Wanpeng Li <wanpeng.li@hotmail.com>
Reviewed-by: Steve Rutherford <srutherford@google.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Remote IRR for level-triggered interrupts was previously checked in
ioapic_set_irq, but since we now have a check in ioapic_service we
can remove the redundant check from ioapic_set_irq.
This commit doesn't change semantics.
Signed-off-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Avoid firing a level-triggered interrupt that has the Remote IRR bit set,
because that means that some CPU is already processing it. The Remote
IRR bit will be cleared after an EOI and the interrupt will refire
if the irq line is still asserted.
This behavior is aligned with QEMU's IOAPIC implementation that was
introduced by commit f99b86b94987
("x86: ioapic: ignore level irq during processing") in QEMU.
Signed-off-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
KVM uses ioapic_handled_vectors to track vectors that need to notify the
IOAPIC on EOI. The problem is that IOAPIC can be reconfigured while an
interrupt with old configuration is pending or running and
ioapic_handled_vectors only remembers the newest configuration;
thus EOI from the old interrupt is not delievered to the IOAPIC.
A previous commit db2bdcbbbd
("KVM: x86: fix edge EOI and IOAPIC reconfig race")
addressed this issue by adding pending edge-triggered interrupts to
ioapic_handled_vectors, fixing this race for edge-triggered interrupts.
The commit explicitly ignored level-triggered interrupts,
but this race applies to them as well:
1) IOAPIC sends a level triggered interrupt vector to VCPU0
2) VCPU0's handler deasserts the irq line and reconfigures the IOAPIC
to route the vector to VCPU1. The reconfiguration rewrites only the
upper 32 bits of the IOREDTBLn register. (Causes KVM to update
ioapic_handled_vectors for VCPU0 and it no longer includes the vector.)
3) VCPU0 sends EOI for the vector, but it's not delievered to the
IOAPIC because the ioapic_handled_vectors doesn't include the vector.
4) New interrupts are not delievered to VCPU1 because remote_irr bit
is set forever.
Therefore, the correct behavior is to add all pending and running
interrupts to ioapic_handled_vectors.
This commit introduces a slight performance hit similar to
commit db2bdcbbbd ("KVM: x86: fix edge EOI and IOAPIC reconfig race")
for the rare case that the vector is reused by a non-IOAPIC source on
VCPU0. We prefer to keep solution simple and not handle this case just
as the original commit does.
Fixes: db2bdcbbbd ("KVM: x86: fix edge EOI and IOAPIC reconfig race")
Signed-off-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Let's rename it into a proper arch specific callback.
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
We know there is an ioapic, so let's call it directly.
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
kvm_ioapic_init() is guaranteed to be called without any created VCPUs,
so doing an all-vcpu request results in a NOP.
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Let's just move it to the place where it is actually needed.
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
When handling KVM_GET_IRQCHIP, we already check irqchip_kernel(), which
implies a fully inititalized ioapic.
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Mostly used for split irqchip mode. In that case, these two things are
not inited at all, so no need to release.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
KVM was using arrays of size KVM_MAX_VCPUS with vcpu_id, but ID can be
bigger that the maximal number of VCPUs, resulting in out-of-bounds
access.
Found by syzkaller:
BUG: KASAN: slab-out-of-bounds in __apic_accept_irq+0xb33/0xb50 at addr [...]
Write of size 1 by task a.out/27101
CPU: 1 PID: 27101 Comm: a.out Not tainted 4.9.0-rc5+ #49
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
[...]
Call Trace:
[...] __apic_accept_irq+0xb33/0xb50 arch/x86/kvm/lapic.c:905
[...] kvm_apic_set_irq+0x10e/0x180 arch/x86/kvm/lapic.c:495
[...] kvm_irq_delivery_to_apic+0x732/0xc10 arch/x86/kvm/irq_comm.c:86
[...] ioapic_service+0x41d/0x760 arch/x86/kvm/ioapic.c:360
[...] ioapic_set_irq+0x275/0x6c0 arch/x86/kvm/ioapic.c:222
[...] kvm_ioapic_inject_all arch/x86/kvm/ioapic.c:235
[...] kvm_set_ioapic+0x223/0x310 arch/x86/kvm/ioapic.c:670
[...] kvm_vm_ioctl_set_irqchip arch/x86/kvm/x86.c:3668
[...] kvm_arch_vm_ioctl+0x1a08/0x23c0 arch/x86/kvm/x86.c:3999
[...] kvm_vm_ioctl+0x1fa/0x1a70 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3099
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: stable@vger.kernel.org
Fixes: af1bae5497 ("KVM: x86: bump KVM_MAX_VCPU_ID to 1023")
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
gcc 7 warns:
arch/x86/kvm/ioapic.c: In function 'kvm_ioapic_reset':
arch/x86/kvm/ioapic.c:597:2: warning: 'memset' used with length equal to number of elements without multiplication by element size [-Wmemset-elt-size]
And it is right. Memset whole array using sizeof operator.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: x86@kernel.org
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
[Added x86 subject tag]
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
When userspace sends KVM_SET_LAPIC, KVM schedules a check between
the vCPU's IRR and ISR and the IOAPIC redirection table, in order
to re-establish the IOAPIC's dest_map (the list of CPUs servicing
the real-time clock interrupt with the corresponding vectors).
However, __rtc_irq_eoi_tracking_restore_one was forgetting to
set dest_map->vectors. Because of this, the IOAPIC did not process
the real-time clock interrupt EOI, ioapic->rtc_status.pending_eoi
got stuck at a non-zero value, and further RTC interrupts were
reported to userspace as coalesced.
Fixes: 9e4aabe2bb
Fixes: 4d99ba898d
Cc: stable@vger.kernel.org
Cc: Joerg Roedel <jroedel@suse.de>
Cc: David Gilbert <dgilbert@redhat.com>
Reviewed-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename kvm_apic_get_reg to kvm_lapic_get_reg to be consistent with
the existing kvm_lapic_set_reg counterpart.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Using the vector stored at interrupt delivery makes the eoi
matching safe agains irq migration in the ioapic.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently this is a bitmap which tracks which CPUs we expect
an EOI from. Move this bitmap to a struct so that we can
track additional information there.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The function to determine if the vector is handled by ioapic used to
rely on the fact that only ioapic-handled vectors were set up to
cause vmexits when virtual apic was in use.
We're going to break this assumption when introducing Hyper-V
synthetic interrupts: they may need to cause vmexits too.
To achieve that, introduce a new bitmap dedicated specifically for
ioapic-handled vectors, and populate EOI exit bitmap from it for now.
Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com>
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Gleb Natapov <gleb@kernel.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Roman Kagan <rkagan@virtuozzo.com>
CC: Denis V. Lunev <den@openvz.org>
CC: qemu-devel@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM uses eoi_exit_bitmap to track vectors that need an action on EOI.
The problem is that IOAPIC can be reconfigured while an interrupt with
old configuration is pending and eoi_exit_bitmap only remembers the
newest configuration; thus EOI from the pending interrupt is not
recognized.
(Reconfiguration is not a problem for level interrupts, because IOAPIC
sends interrupt with the new configuration.)
For an edge interrupt with ACK notifiers, like i8254 timer; things can
happen in this order
1) IOAPIC inject a vector from i8254
2) guest reconfigures that vector's VCPU and therefore eoi_exit_bitmap
on original VCPU gets cleared
3) guest's handler for the vector does EOI
4) KVM's EOI handler doesn't pass that vector to IOAPIC because it is
not in that VCPU's eoi_exit_bitmap
5) i8254 stops working
A simple solution is to set the IOAPIC vector in eoi_exit_bitmap if the
vector is in PIR/IRR/ISR.
This creates an unwanted situation if the vector is reused by a
non-IOAPIC source, but I think it is so rare that we don't want to make
the solution more sophisticated. The simple solution also doesn't work
if we are reconfiguring the vector. (Shouldn't happen in the wild and
I'd rather fix users of ACK notifiers instead of working around that.)
The are no races because ioapic injection and reconfig are locked.
Fixes: b053b2aef2 ("KVM: x86: Add EOI exit bitmap inference")
[Before b053b2aef2, this bug happened only with APICv.]
Fixes: c7c9c56ca2 ("x86, apicv: add virtual interrupt delivery support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We can reuse the algorithm that computes the EOI exit bitmap to figure
out which vectors are handled by the IOAPIC. The only difference
between the two is for edge-triggered interrupts other than IRQ8
that have no notifiers active; however, the IOAPIC does not have to
do anything special for these interrupts anyway.
This again limits the interactions between the IOAPIC and the LAPIC,
making it easier to move the former to userspace.
Inspired by a patch from Steve Rutherford.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do not compute TMR in advance. Instead, set the TMR just before the interrupt
is accepted into the IRR. This limits the coupling between IOAPIC and LAPIC.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If the null test is needed, the call to cancel_delayed_work_sync would have
already crashed. Normally, the destroy function should only be called
if the init function has succeeded, in which case ioapic is not null.
Problem found using Coccinelle.
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Extended struct kvm_lapic_irq with bool msi_redir_hint, which will
be used to determine if the delivery of the MSI should target only
the lowest priority CPU in the logical group specified for delivery.
(In physical dest mode, the RH bit is not relevant). Initialized the value
of msi_redir_hint to true when RH=1 in kvm_set_msi_irq(), and initialized
to false in all other cases.
Added value of msi_redir_hint to a debug message dump of an IRQ in
apic_send_ipi().
Signed-off-by: James Sullivan <sullivan.james.f@gmail.com>
Reviewed-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ARM/ARM64: fixes for live migration, irqfd and ioeventfd support (enabling
vhost, too), page aging
s390: interrupt handling rework, allowing to inject all local interrupts
via new ioctl and to get/set the full local irq state for migration
and introspection. New ioctls to access memory by virtual address,
and to get/set the guest storage keys. SIMD support.
MIPS: FPU and MIPS SIMD Architecture (MSA) support. Includes some patches
from Ralf Baechle's MIPS tree.
x86: bugfixes (notably for pvclock, the others are small) and cleanups.
Another small latency improvement for the TSC deadline timer.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJVJ9vmAAoJEL/70l94x66DoMEH/R3rh8IMf4jTiWRkcqohOMPX
k1+NaSY/lCKayaSgggJ2hcQenMbQoXEOdslvaA/H0oC+VfJGK+lmU6E63eMyyhjQ
Y+Px6L85NENIzDzaVu/TIWWuhil5PvIRr3VO8cvntExRoCjuekTUmNdOgCvN2ObW
wswN2qRdPIeEj2kkulbnye+9IV4G0Ne9bvsmUdOdfSSdi6ZcV43JcvrpOZT++mKj
RrKB+3gTMZYGJXMMLBwMkdl8mK1ozriD+q0mbomT04LUyGlPwYLl4pVRDBqyksD7
KsSSybaK2E4i5R80WEljgDMkNqrCgNfg6VZe4n9Y+CfAAOToNnkMJaFEi+yuqbs=
=yu2b
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"First batch of KVM changes for 4.1
The most interesting bit here is irqfd/ioeventfd support for ARM and
ARM64.
Summary:
ARM/ARM64:
fixes for live migration, irqfd and ioeventfd support (enabling
vhost, too), page aging
s390:
interrupt handling rework, allowing to inject all local interrupts
via new ioctl and to get/set the full local irq state for migration
and introspection. New ioctls to access memory by virtual address,
and to get/set the guest storage keys. SIMD support.
MIPS:
FPU and MIPS SIMD Architecture (MSA) support. Includes some
patches from Ralf Baechle's MIPS tree.
x86:
bugfixes (notably for pvclock, the others are small) and cleanups.
Another small latency improvement for the TSC deadline timer"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (146 commits)
KVM: use slowpath for cross page cached accesses
kvm: mmu: lazy collapse small sptes into large sptes
KVM: x86: Clear CR2 on VCPU reset
KVM: x86: DR0-DR3 are not clear on reset
KVM: x86: BSP in MSR_IA32_APICBASE is writable
KVM: x86: simplify kvm_apic_map
KVM: x86: avoid logical_map when it is invalid
KVM: x86: fix mixed APIC mode broadcast
KVM: x86: use MDA for interrupt matching
kvm/ppc/mpic: drop unused IRQ_testbit
KVM: nVMX: remove unnecessary double caching of MAXPHYADDR
KVM: nVMX: checks for address bits beyond MAXPHYADDR on VM-entry
KVM: x86: cache maxphyaddr CPUID leaf in struct kvm_vcpu
KVM: vmx: pass error code with internal error #2
x86: vdso: fix pvclock races with task migration
KVM: remove kvm_read_hva and kvm_read_hva_atomic
KVM: x86: optimize delivery of TSC deadline timer interrupt
KVM: x86: extract blocking logic from __vcpu_run
kvm: x86: fix x86 eflags fixed bit
KVM: s390: migrate vcpu interrupt state
...
This is needed in e.g. ARM vGIC emulation, where the MMIO handling
depends on the VCPU that does the access.
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
An overhead from function call is not appropriate for its size and
frequency of execution.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
kvm_ioapic_update_eoi() wasn't called if directed EOI was enabled.
We need to do that for irq notifiers. (Like with edge interrupts.)
Fix it by skipping EOI broadcast only.
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=82211
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This patch fixes the bug discussed in
https://www.mail-archive.com/kvm@vger.kernel.org/msg109813.html
This patch uses a new field named irr_delivered to record the
delivery status of edge-triggered interrupts, and clears the
delivered interrupts in kvm_get_ioapic. So it has the same effect
of commit 0bc830b05c
("KVM: ioapic: clear IRR for edge-triggered interrupts at delivery")
while avoids the bug of Windows guests.
Signed-off-by: Wincy Van <fanwenyi0529@gmail.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
ia64 does not need them anymore. Ack notifiers become x86-specific
too.
Suggested-by: Gleb Natapov <gleb@kernel.org>
Reviewed-by: Radim Krcmar <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
