Add support for the jack detection functionality in the A64 variant,
which uses a pair of IRQs; and microphone accessory (button) detection,
which uses an ADC with an IRQ trigger.
IRQs will only be triggered if the JACKDETEN, HMICBIASEN, and MICADCEN
bits are set appropriately in the analog codec component
(sun50i-codec-analog), but there is no direct software dependency
between the two components.
Setup ADC so that it samples with period of 16ms, disable smoothing
and enable MDATA threshold (should be below idle voltage/HMIC_DATA
value). Also enable HMIC_N, which makes sure we get HMIC_N samples
after HMIC_DATA crosses the threshold.
This allows us to perform steady state detection of HMIC_DATA, by
comparing current and previous ADC samples, to detect end of the
transient when the user de-presses the button. Otherwise ADC could
sample anywhere within the transient, and the driver may mis-issue
key-press events for other buttons attached to the resistor ladder.
[Ondrej: Almost complete rewrite of the patch, change to use set_jack
API. Better de-bounce, fix mic button handling, better interrupt
processing.]
Signed-off-by: Arnaud Ferraris <arnaud.ferraris@collabora.com>
[Samuel: Decouple from analog codec, fixes]
Co-developed-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Co-developed-by: Ondrej Jirman <megi@xff.cz>
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Link: https://msgid.link/r/20240302140042.1990256-5-megi@xff.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit adds the necessary setup to enable jack detection on startup
as well as the callback function enabling the microphone ADC when
headset bias is enabled. The microphone ADC is also disabled in suspend.
Signed-off-by: Arnaud Ferraris <arnaud.ferraris@collabora.com>
[Samuel: Moved MICADCEN setup to HBIAS event, added bias hooks]
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Ondřej Jirman <megi@xff.cz>
Link: https://msgid.link/r/20240302140042.1990256-4-megi@xff.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
For codec variants that have a bus clock, that clock must be running to
receive interrupts. Since jack and mic accessory detection should work
even when no audio is playing, that means the bus clock should be
enabled any time the system is on.
Accomplish that by tying the bus clock to the runtime PM state, which is
then tied to the bias level not being OFF. Since the codec sets
idle_bias_on, bias will generally never be OFF. However, we can set
suspend_bias_off to maintain the power savings of gating the bus clock
during suspend, when we don't expect jack/accessory detection to work.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Ondřej Jirman <megi@xff.cz>
Link: https://msgid.link/r/20240302140042.1990256-3-megi@xff.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
With idle_bias_on and suspend_bias_off, there are bias level transitions
that match the suspend/resume callbacks. However, there are also
transitions during probe (OFF => STANDBY) and removal (STANDBY => OFF).
By using the set_bias_level hook, the driver can have one copy of code
that would otherwise be duplicated between the probe/resume and
suspend/remove hooks.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Ondřej Jirman <megi@xff.cz>
Link: https://msgid.link/r/20240302140042.1990256-2-megi@xff.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
The SPDIF hardware block found in the H616 SoC has the same layout as
the one found in the H6 SoC, except that it is missing the receiver
side.
Since the driver currently only supports the transmit function, support
for the H616 is identical to what is currently done for the H6.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://msgid.link/r/20240127163247.384439-4-wens@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it was merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev> # for at91
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231006-dt-asoc-header-cleanups-v3-1-13a4f0f7fee6@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC is now unified asoc_xxx() into snd_soc_xxx().
This patch convert asoc_xxx() to snd_soc_xxx().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87o7i8qnie.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC merges DAI call backs into .ops.
This patch merge these into one.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/875y5pb0sr.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver depends on CONFIG_OF, it is not necessary to use
of_match_ptr() here.
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com
Link: https://lore.kernel.org/r/20230811071426.2343133-4-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230315150745.67084-145-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Ban Tao <fengzheng923@gmail.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230315150745.67084-144-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230315150745.67084-143-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230315150745.67084-142-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230315150745.67084-141-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Acked-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/202211111641514826535@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
In configurations with CONFIG_OF=n, we get a harmless build warning:
sound/soc/sunxi/sun50i-dmic.c:268:34: warning: unused variable
'sun50i_dmic_of_match' [-Wunused-const-variable]
Signed-off-by: Ban Tao <fengzheng923@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/1666511085-2748-1-git-send-email-fengzheng923@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Just fix compile error without any logic changes.
sound/soc/sunxi/sun50i-dmic.c:62:1: error: ‘static’ is not at beginning of declaration [-Werror=old-style-declaration]
62 | const static struct dmic_rate dmic_rate_s[] = {
| ^~~~~
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Link: https://lore.kernel.org/r/20220921033819.2188233-1-zengheng4@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
At present, succesfull probing of H3 Codec results in an error
debugfs: Directory '1c22c00.codec' with parent 'H3 Audio Codec' already present!
This is caused by a directory name conflict between codec
components. Fix it by setting debugfs_prefix for the CPU DAI
component.
Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
Link: https://lore.kernel.org/r/20220913212256.151799-2-mike.rudenko@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the case when a codec device is probed before codec analog
controls, snd_soc_register_card() returns -EPROBE_DEFER, resulting in
a misleading error message
sun4i-codec 1c22c00.codec: Failed to register our card
even if the device is probed successfully later. Use dev_err_probe()
to demote the above error to a debug message.
Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220911145713.55199-1-mike.rudenko@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
Historically, the legacy DAI naming scheme was applied to platform
drivers and the newer scheme to CODEC drivers. During componentisation
the core lost the knowledge of if a driver was a CODEC or platform, they
were all now components. To continue to support the legacy naming on
older platform drivers a flag was added to the snd_soc_component_driver
structure, non_legacy_dai_naming, to indicate to use the new scheme and
this was applied to all CODECs as part of the migration.
However, a slight issue appears to be developing with respect to this
flag being opt in for the non-legacy scheme, which presumably we want to
be the primary scheme used. Many codec drivers appear to forget to
include this flag:
grep -l -r "snd_soc_component_driver" sound/soc/codecs/*.c |
xargs grep -L "non_legacy_dai_naming" | wc
48 48 556
Whilst in many cases the configuration of the DAIs themselves will cause
the core to apply the new scheme anyway, it would seem more sensible to
change the flag to legacy_dai_naming making the new scheme opt out. This
patch series migrates across to such a scheme.
In order to properly bias headset microphones, there should be a pull-up
resistor between pins HBIAS and MIC2P. This can be an external resistor,
but the codec also provides an internal 2.2K resistor which is enabled
by a register.
This patch enables or disables the internal bias resistor based on a
device tree property.
Signed-off-by: Arnaud Ferraris <arnaud.ferraris@collabora.com>
[Samuel: split binding and implementation; move to device probe]
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20220621035452.60272-3-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-42-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the legacy DAI naming flag from opting in to the new scheme
(non_legacy_dai_naming), to opting out of it (legacy_dai_naming).
These drivers appear to be on the CPU side of the DAI link and
currently uses the legacy naming, so add the new flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-15-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove warnings
sound/soc/sunxi/sun4i-i2s.c:205: warning: Function parameter or member
'num_din_pins' not described in 'sun4i_i2s_quirks'
sound/soc/sunxi/sun4i-i2s.c:205: warning: Function parameter or member
'num_dout_pins' not described in 'sun4i_i2s_quirks'
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220616220802.136282-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Li Chen <lchen.firstlove@zohomail.com>
This series proposes to add simple bit operations for setting, clearing
and testing specific bits with regmap_field and uses them in one of the
sunxi drivers.
Appropriately change calls to {regmap/regmap_field}_update_bits()
with {regmap/regmap_field}_set_bits()
and {regmap/regmap_field}_clear_bits() for improved readability.
Signed-off-by: Li Chen <lchen@ambarella.com>
Link: https://lore.kernel.org/r/180eef50e96.cb7c34db60740.8898768158778553647@zohomail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Recent updates accidentally updated the clock producer/consumer
specifiers on this device as part of refactoring the CPU side of the DAI
links. However, this device sits on the CODEC side and shouldn't have
been updated. Partially revert the changes keeping the switch to the new
clock terminology but going back to the CODEC defines.
Fixes: 7cc3965fde ("ASoC: sunxi: Update to use set_fmt_new callback")
Reported-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Tested-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20220613161552.481337-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now the core has been migrated across to the new direct clock
specification we can move the drivers back to the normal set_fmt
callback.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220519154318.2153729-50-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of updating the core to directly tell drivers if they are clock
provider or consumer update these CPU side drivers to use the new direct
callback.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220519154318.2153729-23-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This adds a new set of quirks to set the right RX channel map. Since
that is the only change to the register layout, reuse the H6 regmap
config by extending its last register. R329 support is added by its
compatible string. D1 uses R329 as its fallback compatible, so no
additional code change is needed for it.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220203020116.12279-4-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
H6 expands the number of channels in each direction to 16, so the slot
number fields need to be expanded from 3 to 4 bits each.
R329/D1 expand that further by allowing each of the 16 slots to map to
any of 4 data pins. For TX, the configuration of each pin is
independent, so there is a copy of the mapping registers for each pin.
For RX, each of the 16 slots can map to only one pin, so the registers
were changed to add the pin selection inline with the channel mapping.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220203020116.12279-3-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This allows changing the volume of each digital input/output
independently, and provides the only "master volume" for the DAC.
(The ADC also has a gain control on the analog side.)
While the hardware supports digital gain up to +72dB, the controls here
are limited to +24dB maximum, as any gain above that level makes volume
sliders difficult to use, and is extremely likely to cause clipping.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20211118033645.43524-1-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
devm_ioremap_resource() prints error message in itself. Remove the
dev_err call to avoid redundant error message.
Signed-off-by: Muhammad Usama Anjum <musamaanjum@gmail.com>
Link: https://lore.kernel.org/r/20210407095634.GA1379642@LEGION
Signed-off-by: Mark Brown <broonie@kernel.org>
card->owner is a required property and since commit 81033c6b58 ("ALSA:
core: Warn on empty module") a warning is issued if it is empty. Add it.
This fixes following warning observed on Lamobo R1:
WARNING: CPU: 1 PID: 190 at sound/core/init.c:207 snd_card_new+0x430/0x480 [snd]
Modules linked in: sun4i_codec(E+) sun4i_backend(E+) snd_soc_core(E) ...
CPU: 1 PID: 190 Comm: systemd-udevd Tainted: G C E 5.10.0-1-armmp #1 Debian 5.10.4-1
Hardware name: Allwinner sun7i (A20) Family
Call trace:
(snd_card_new [snd])
(snd_soc_bind_card [snd_soc_core])
(snd_soc_register_card [snd_soc_core])
(sun4i_codec_probe [sun4i_codec])
Fixes: 45fb6b6f2a ("ASoC: sunxi: add support for the on-chip codec on early Allwinner SoCs")
Related: commit 3c27ea23ff ("ASoC: qcom: Set card->owner to avoid warnings")
Related: commit ec653df2a0 ("drm/vc4/vc4_hdmi: fill ASoC card owner")
Cc: linux-arm-kernel@lists.infradead.org
Cc: alsa-devel@alsa-project.org
Signed-off-by: Bastian Germann <bage@linutronix.de>
Link: https://lore.kernel.org/r/20210331151843.30583-1-bage@linutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dai_set_drvdata is not needed when the set data comes from
snd_soc_dai_get_drvdata or dev_get_drvdata. The problem was fixed
usingthe following semantic patch: (http://coccinelle.lip6.fr/)
// <smpl>
@@
expression x,y,e;
@@
x = dev_get_drvdata(y->dev)
... when != x = e
- snd_soc_dai_set_drvdata(y,x);
@@
expression x,y,e;
@@
x = snd_soc_dai_get_drvdata(y)
... when != x = e
- snd_soc_dai_set_drvdata(y,x);
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://lore.kernel.org/r/20210213101907.1318496-4-Julia.Lawall@inria.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
COMMON_CLK is a user-selectable option with its own dependencies. The
most important dependency is !HAVE_LEGACY_CLK. User-selectable drivers
should not select COMMON_CLK because they will create a dependency cycle
and build failures. For example on MIPS a configuration with COMMON_CLK
(selected by SND_SUN8I_CODEC) and HAVE_LEGACY_CLK (selected by
SOC_RT305X) is possible:
WARNING: unmet direct dependencies detected for COMMON_CLK
Depends on [n]: !HAVE_LEGACY_CLK [=y]
Selected by [y]:
- SND_SUN8I_CODEC [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] &&
(ARCH_SUNXI || COMPILE_TEST [=y]) && OF [=y] && (MACH_SUN8I || ARM64 && ARCH_SUNXI || COMPILE_TEST [=y])
/usr/bin/mips-linux-gnu-ld: drivers/clk/clk.o: in function `clk_set_rate':
(.text+0xaeb4): multiple definition of `clk_set_rate'; arch/mips/ralink/clk.o:(.text+0x88): first defined here
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20201118201420.4878-1-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Checkpatch script produces warning:
WARNING: function definition argument 'const struct sun4i_i2s *'
should also have an identifier name.
Let's fix this by adding identifier name to get_bclk_parent_rate()
and set_fmt() callback definition.
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Link: https://lore.kernel.org/r/20201030144648.397824-10-peron.clem@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Because SUN4I_I2S_FIFO_CTRL_REG is volatile, writes done while the
regmap is cache-only are ignored. To work around this, move the
configuration to a callback that runs while the ASoC core has a
runtime PM reference to the device.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Link: https://lore.kernel.org/r/20201030144648.397824-9-peron.clem@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The FIFO TX reg is volatile and sun8i i2s register
mapping is different from sun4i.
Even if in this case it's doesn't create an issue,
Avoid setting some regs that are undefined in sun8i.
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Link: https://lore.kernel.org/r/20201030144648.397824-8-peron.clem@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Extend the functionality of the driver to include support of 20 and
24 bits per sample.
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Link: https://lore.kernel.org/r/20201030144648.397824-7-peron.clem@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
