Commit Graph

180 Commits

Author SHA1 Message Date
Dave Chinner
88e8fda99a Merge branch 'xfs-mmap-lock' into for-next 2015-02-24 10:27:47 +11:00
Dave Chinner
3cabb836d8 Merge branch 'xfs-misc-fixes-for-4.1' into for-next 2015-02-24 10:24:07 +11:00
Dave Chinner
58c904734c xfs: inodes are new until the dentry cache is set up
Al Viro noticed a generic set of issues to do with filehandle lookup
racing with dentry cache setup. They involve a filehandle lookup
occurring while an inode is being created and the filehandle lookup
racing with the dentry creation for the real file. This can lead to
multiple dentries for the one path being instantiated. There are a
host of other issues around this same set of paths.

The underlying cause is that file handle lookup only waits on inode
cache instantiation rather than full dentry cache instantiation. XFS
is mostly immune to the problems discovered due to it's own internal
inode cache, but there are a couple of corner cases where races can
happen.

We currently clear the XFS_INEW flag when the inode is fully set up
after insertion into the cache. Newly allocated inodes are inserted
locked and so aren't usable until the allocation transaction
commits. This, however, occurs before the dentry and security
information is fully initialised and hence the inode is unlocked and
available for lookups to find too early.

To solve the problem, only clear the XFS_INEW flag for newly created
inodes once the dentry is fully instantiated. This means lookups
will retry until the XFS_INEW flag is removed from the inode and
hence avoids the race conditions in questions.

THis also means that xfs_create(), xfs_create_tmpfile() and
xfs_symlink() need to finish the setup of the inode in their error
paths if we had allocated the inode but failed later in the creation
process. xfs_symlink(), in particular, needed a lot of help to make
it's error handling match that of xfs_create().

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-02-23 22:38:08 +11:00
Dave Chinner
5885ebda87 xfs: ensure truncate forces zeroed blocks to disk
A new fsync vs power fail test in xfstests indicated that XFS can
have unreliable data consistency when doing extending truncates that
require block zeroing. The blocks beyond EOF get zeroed in memory,
but we never force those changes to disk before we run the
transaction that extends the file size and exposes those blocks to
userspace. This can result in the blocks not being correctly zeroed
after a crash.

Because in-memory behaviour is correct, tools like fsx don't pick up
any coherency problems - it's not until the filesystem is shutdown
or the system crashes after writing the truncate transaction to the
journal but before the zeroed data in the page cache is flushed that
the issue is exposed.

Fix this by also flushing the dirty data in memory region between
the old size and new size when we've found blocks that need zeroing
in the truncate process.

Reported-by: Liu Bo <bo.li.liu@oracle.com>
cc: <stable@vger.kernel.org>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-02-23 22:37:08 +11:00
Dave Chinner
653c60b633 xfs: introduce mmap/truncate lock
Right now we cannot serialise mmap against truncate or hole punch
sanely. ->page_mkwrite is not able to take locks that the read IO
path normally takes (i.e. the inode iolock) because that could
result in lock inversions (read - iolock - page fault - page_mkwrite
- iolock) and so we cannot use an IO path lock to serialise page
write faults against truncate operations.

Instead, introduce a new lock that is used *only* in the
->page_mkwrite path that is the equivalent of the iolock. The lock
ordering in a page fault is i_mmaplock -> page lock -> i_ilock,
and so in truncate we can i_iolock -> i_mmaplock and so lock out
new write faults during the process of truncation.

Because i_mmap_lock is outside the page lock, we can hold it across
all the same operations we hold the i_iolock for. The only
difference is that we never hold the i_mmaplock in the normal IO
path and so do not ever have the possibility that we can page fault
inside it. Hence there are no recursion issues on the i_mmap_lock
and so we can use it to serialise page fault IO against inode
modification operations that affect the IO path.

This patch introduces the i_mmaplock infrastructure, lockdep
annotations and initialisation/destruction code. Use of the new lock
will be in subsequent patches.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-02-23 21:43:37 +11:00
Dave Chinner
3fd1b0d158 Merge branch 'xfs-misc-fixes-for-3.20-3' into for-next 2015-02-02 10:03:18 +11:00
Christoph Hellwig
8add71ca3f xfs: factor out a xfs_update_prealloc_flags() helper
This logic is duplicated in xfs_file_fallocate and xfs_ioc_space, and
we'll need another copy of it for pNFS block support.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-02-02 09:53:56 +11:00
Carlos Maiolino
d31a182545 xfs: Add support to RENAME_EXCHANGE flag
Adds a new function named xfs_cross_rename(), responsible for
handling requests from sys_renameat2() using RENAME_EXCHANGE flag.

Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-12-24 08:51:42 +11:00
Christoph Hellwig
6d3ebaae7c xfs: merge xfs_dinode.h into xfs_format.h
More consolidatation for the on-disk format defintions.  Note that the
XFS_IS_REALTIME_INODE moves to xfs_linux.h instead as it is not related
to the on disk format, but depends on a CONFIG_ option.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-11-28 14:24:06 +11:00
Brian Foster
ce57bcf6b8 xfs: check for inode size overflow in xfs_new_eof()
If we write to the maximum file offset (2^63-2), XFS fails to log the
inode size update when the page is flushed. For example:

$ xfs_io -fc "pwrite `echo "2^63-1-1" | bc` 1" /mnt/file
wrote 1/1 bytes at offset 9223372036854775806
1.000000 bytes, 1 ops; 0.0000 sec (22.711 KiB/sec and 23255.8140 ops/sec)
$ stat -c %s /mnt/file
9223372036854775807
$ umount /mnt ; mount <dev> /mnt/
$ stat -c %s /mnt/file
0

This occurs because XFS calculates the new file size as io_offset +
io_size, I/O occurs in block sized requests, and the maximum supported
file size is not block aligned. Therefore, a write to the max allowable
offset on a 4k blocksize fs results in a write of size 4k to offset
2^63-4096 (e.g., equivalent to round_down(2^63-1, 4096), or IOW the
offset of the block that contains the max file size). The offset plus
size calculation (2^63 - 4096 + 4096 == 2^63) overflows the signed
64-bit variable which goes negative and causes the > comparison to the
on-disk inode size to fail. This returns 0 from xfs_new_eof() and
results in no change to the inode on-disk.

Update xfs_new_eof() to explicitly detect overflow of the local
calculation and use the VFS inode size in this scenario. The VFS inode
size is capped to the maximum and thus XFS writes the correct inode size
to disk.

Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-10-02 09:21:53 +10:00
Dave Chinner
b92cc59f69 xfs: kill xfs_vnode.h
Move the IO flag definitions to xfs_inode.h and kill the header file
as it is now empty.

Removing the xfs_vnode.h file showed up an implicit header include
path:
	xfs_linux.h -> xfs_vnode.h -> xfs_fs.h

And so every xfs header file has been inplicitly been including
xfs_fs.h where it is needed or not. Hence the removal of xfs_vnode.h
causes all sorts of build issues because BBTOB() and friends are no
longer automatically included in the build. This also gets fixed.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-08-04 13:28:20 +10:00
Dave Chinner
b70f14e1ff Merge branch 'xfs-feature-bit-cleanup' into for-next
Conflicts:
	fs/xfs/xfs_inode.c
2014-05-20 08:57:02 +10:00
Dave Chinner
263997a684 xfs: turn NLINK feature on by default
mkfs has turned on the XFS_SB_VERSION_NLINKBIT feature bit by
default since November 2007. It's about time we simply made the
kernel code turn it on by default and so always convert v1 inodes to
v2 inodes when reading them in from disk or allocating them. This
This removes needless version checks and modification when bumping
link counts on inodes, and will take code out of a few common code
paths.

   text    data     bss     dec     hex filename
 783251  100867     616  884734   d7ffe fs/xfs/xfs.o.orig
 782664  100867     616  884147   d7db3 fs/xfs/xfs.o.patched

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-05-20 07:46:40 +10:00
Dave Chinner
232c2f5c65 Merge branch 'xfs-filestreams-lookup' into for-next 2014-05-15 09:36:59 +10:00
Christoph Hellwig
f37211c336 xfs: remove XFS_IFILESTREAM
We never test the flag except in xfs_inode_is_filestream, but that
function already tests the on-disk flag or filesystem wide flags,
and is used to decide if we want to set XFS_IFILESTREAM in the
first place.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-04-23 07:11:51 +10:00
Brian Foster
330033d697 xfs: fix tmpfile/selinux deadlock and initialize security
xfstests generic/004 reproduces an ilock deadlock using the tmpfile
interface when selinux is enabled. This occurs because
xfs_create_tmpfile() takes the ilock and then calls d_tmpfile(). The
latter eventually calls into xfs_xattr_get() which attempts to get the
lock again. E.g.:

xfs_io          D ffffffff81c134c0  4096  3561   3560 0x00000080
ffff8801176a1a68 0000000000000046 ffff8800b401b540 ffff8801176a1fd8
00000000001d5800 00000000001d5800 ffff8800b401b540 ffff8800b401b540
ffff8800b73a6bd0 fffffffeffffffff ffff8800b73a6bd8 ffff8800b5ddb480
Call Trace:
[<ffffffff8177f969>] schedule+0x29/0x70
[<ffffffff81783a65>] rwsem_down_read_failed+0xc5/0x120
[<ffffffffa05aa97f>] ? xfs_ilock_attr_map_shared+0x1f/0x50 [xfs]
[<ffffffff813b3434>] call_rwsem_down_read_failed+0x14/0x30
[<ffffffff810ed179>] ? down_read_nested+0x89/0xa0
[<ffffffffa05aa7f2>] ? xfs_ilock+0x122/0x250 [xfs]
[<ffffffffa05aa7f2>] xfs_ilock+0x122/0x250 [xfs]
[<ffffffffa05aa97f>] xfs_ilock_attr_map_shared+0x1f/0x50 [xfs]
[<ffffffffa05701d0>] xfs_attr_get+0x90/0xe0 [xfs]
[<ffffffffa0565e07>] xfs_xattr_get+0x37/0x50 [xfs]
[<ffffffff8124842f>] generic_getxattr+0x4f/0x70
[<ffffffff8133fd9e>] inode_doinit_with_dentry+0x1ae/0x650
[<ffffffff81340e0c>] selinux_d_instantiate+0x1c/0x20
[<ffffffff813351bb>] security_d_instantiate+0x1b/0x30
[<ffffffff81237db0>] d_instantiate+0x50/0x70
[<ffffffff81237e85>] d_tmpfile+0xb5/0xc0
[<ffffffffa05add02>] xfs_create_tmpfile+0x362/0x410 [xfs]
[<ffffffffa0559ac8>] xfs_vn_tmpfile+0x18/0x20 [xfs]
[<ffffffff81230388>] path_openat+0x228/0x6a0
[<ffffffff810230f9>] ? sched_clock+0x9/0x10
[<ffffffff8105a427>] ? kvm_clock_read+0x27/0x40
[<ffffffff8124054f>] ? __alloc_fd+0xaf/0x1f0
[<ffffffff8123101a>] do_filp_open+0x3a/0x90
[<ffffffff817845e7>] ? _raw_spin_unlock+0x27/0x40
[<ffffffff8124054f>] ? __alloc_fd+0xaf/0x1f0
[<ffffffff8121e3ce>] do_sys_open+0x12e/0x210
[<ffffffff8121e4ce>] SyS_open+0x1e/0x20
[<ffffffff8178eda9>] system_call_fastpath+0x16/0x1b

xfs_vn_tmpfile() also fails to initialize security on the newly created
inode.

Pull the d_tmpfile() call up into xfs_vn_tmpfile() after the transaction
has been committed and the inode unlocked. Also, initialize security on
the inode based on the parent directory provided via the tmpfile call.

Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-04-17 08:15:30 +10:00
Dave Chinner
fe986f9d88 Merge branch 'xfs-O_TMPFILE-support' into for-next
Conflicts:
	fs/xfs/xfs_trans_resv.c
	- fix for XFS_INODE_CLUSTER_SIZE macro removal
2014-03-13 19:14:43 +11:00
Zhi Yong Wu
99b6436bc2 xfs: add O_TMPFILE support
Add two functions xfs_create_tmpfile() and xfs_vn_tmpfile()
to support O_TMPFILE file creation.

In contrast to xfs_create(), xfs_create_tmpfile() has a different
log reservation to the regular file creation because there is no
directory modification, and doesn't check if an entry can be added
to the directory, but the reservation quotas is required appropriately,
and finally its inode is added to the unlinked list.

xfs_vn_tmpfile() add one O_TMPFILE method to VFS interface and directly
invoke xfs_create_tmpfile().

Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
2014-01-06 13:50:06 -06:00
Zhi Yong Wu
163467d375 xfs: factor prid related codes into xfs_get_initial_prid()
It will be reused by the O_TMPFILE creation function.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2014-01-06 13:46:25 -06:00
Christoph Hellwig
efa70be165 xfs: add xfs_ilock_attr_map_shared
Equivalent to xfs_ilock_data_map_shared, except for the attribute fork.

Make xfs_getbmap use it if called for the attribute fork instead of
xfs_ilock_data_map_shared.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2013-12-18 15:48:44 -06:00
Christoph Hellwig
309ecac8e7 xfs: rename xfs_ilock_map_shared
Make it clear that we're only locking against the extent map on the data
fork.  Also clean the function up a little bit.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2013-12-18 15:39:30 -06:00
Christoph Hellwig
01f4f32775 xfs: remove xfs_iunlock_map_shared
We can just use xfs_iunlock without any loss of clarity.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2013-12-18 15:38:57 -06:00
Dave Chinner
32c5483a8a xfs: abstract the differences in dir2/dir3 via an ops vector
Lots of the dir code now goes through switches to determine what is
the correct on-disk format to parse. It generally involves a
"xfs_sbversion_hasfoo" check, deferencing the superblock version and
feature fields and hence touching several cache lines per operation
in the process. Some operations do multiple checks because they nest
conditional operations and they don't pass the information in a
direct fashion between each other.

Hence, add an ops vector to the xfs_inode structure that is
configured when the inode is initialised to point to all the correct
decode and encoding operations.  This will significantly reduce the
branchiness and cacheline footprint of the directory object decoding
and encoding.

This is the first patch in a series of conversion patches. It will
introduce the ops structure, the setup of it and add the first
operation to the vector. Subsequent patches will convert directory
ops one at a time to keep the changes simple and obvious.

Just this patch shows the benefit of such an approach on code size.
Just converting the two shortform dir operations as this patch does
decreases the built binary size by ~1500 bytes:

$ size fs/xfs/xfs.o.orig fs/xfs/xfs.o.p1
   text    data     bss     dec     hex filename
 794490   96802    1096  892388   d9de4 fs/xfs/xfs.o.orig
 792986   96802    1096  890884   d9804 fs/xfs/xfs.o.p1
$

That's a significant decrease in the instruction cache footprint of
the directory code for such a simple change, and indicates that this
approach is definitely worth pursuing further.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
2013-10-30 13:37:38 -05:00
Dave Chinner
a4fbe6ab1e xfs: decouple inode and bmap btree header files
Currently the xfs_inode.h header has a dependency on the definition
of the BMAP btree records as the inode fork includes an array of
xfs_bmbt_rec_host_t objects in it's definition.

Move all the btree format definitions from xfs_btree.h,
xfs_bmap_btree.h, xfs_alloc_btree.h and xfs_ialloc_btree.h to
xfs_format.h to continue the process of centralising the on-disk
format definitions. With this done, the xfs inode definitions are no
longer dependent on btree header files.

The enables a massive culling of unnecessary includes, with close to
200 #include directives removed from the XFS kernel code base.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2013-10-23 16:28:49 -05:00
Brian Foster
74564fb48c xfs: clean up xfs_inactive() error handling, kill VN_INACTIVE_[NO]CACHE
The xfs_inactive() return value is meaningless. Turn xfs_inactive()
into a void function and clean up the error handling appropriately.
Kill the VN_INACTIVE_[NO]CACHE directives as they are not relevant
to Linux.

Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2013-10-08 17:20:41 -05:00
Dave Chinner
e546cb79ef xfs: consolidate xfs_utils.c
There are a few small helper functions in xfs_util, all related to
xfs_inode modifications. Move them all to xfs_inode.c so all
xfs_inode operations are consiolidated in the one place.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2013-08-12 16:55:17 -05:00
Dave Chinner
c24b5dfadc xfs: kill xfs_vnodeops.[ch]
Now we have xfs_inode.c for holding kernel-only XFS inode
operations, move all the inode operations from xfs_vnodeops.c to
this new file as it holds another set of kernel-only inode
operations. The name of this file traces back to the days of Irix
and it's vnodes which we don't have anymore.

Essentially this move consolidates the inode locking functions
and a bunch of XFS inode operations into the one file. Eventually
the high level functions will be merged into the VFS interface
functions in xfs_iops.c.

This leaves only internal preallocation, EOF block manipulation and
hole punching functions in vnodeops.c. Move these to xfs_bmap_util.c
where we are already consolidating various in-kernel physical extent
manipulation and querying functions.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2013-08-12 16:53:39 -05:00
Dave Chinner
1fd7115eda xfs: introduce xfs_inode_buf.c for inode buffer operations
The only thing remaining in xfs_inode.[ch] are the operations that
read, write or verify physical inodes in their underlying buffers.
Move all this code to xfs_inode_buf.[ch] and so we can stop sharing
xfs_inode.[ch] with userspace.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2013-08-12 16:39:05 -05:00
Dave Chinner
7bb85ef360 xfs: move unrelated definitions out of xfs_inode.h
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2013-08-12 16:37:57 -05:00
Dave Chinner
5c4d97d01a xfs: move inode fork definitions to a new header file
The inode fork definitions are a combination of on-disk format
definition and in-memory tracking and manipulation. They are both
shared with userspace, so move them all into their own file so
sharing is easy to do and track.  This removes all inode fork
related information from xfs_inode.h.

Do the same for the all the C code that currently resides in
xfs_inode.c for the same reason.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2013-08-12 16:37:32 -05:00
Dave Chinner
69432832fd xfs: split out inode log item format definition
The log item format definitions are shared with userspace. Split
them out of header files that contain kernel only defintions to make
it simple to shared them.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2013-08-12 16:05:19 -05:00
Chandra Seetharaman
92f8ff73f1 xfs: Add pquota fields where gquota is used.
Add project quota changes to all the places where group quota field
is used:
   * add separate project quota members into various structures
   * split project quota and group quotas so that instead of overriding
     the group quota members incore, the new project quota members are
     used instead
   * get rid of usage of the OQUOTA flag incore, in favor of separate
     group and project quota flags.
   * add a project dquot argument to various functions.

Not using the pquotino field from superblock yet.

Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2013-07-11 10:35:32 -05:00
Christoph Hellwig
93848a999c xfs: add version 3 inode format with CRCs
Add a new inode version with a larger core.  The primary objective is
to allow for a crc of the inode, and location information (uuid and ino)
to verify it was written in the right place.  We also extend it by:

	a creation time (for Samba);
	a changecount (for NFSv4);
	a flush sequence (in LSN format for recovery);
	an additional inode flags field; and
	some additional padding.

These additional fields are not implemented yet, but already laid
out in the structure.

[dchinner@redhat.com] Added LSN and flags field, some factoring and rework to
capture all the necessary information in the crc calculation.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2013-04-21 15:03:33 -05:00
Christoph Hellwig
56cea2d088 xfs: take inode version into account in XFS_LITINO
Add a version argument to XFS_LITINO so that it can return different values
depending on the inode version.  This is required for the upcoming v3 inodes
with a larger fixed layout dinode.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2013-03-14 16:19:14 -05:00
Alex Elder
311f08acde xfs: memory barrier before wake_up_bit()
In xfs_ifunlock() there is a call to wake_up_bit() after clearing
the flush lock on the xfs inode.  This is not guaranteed to be safe,
as noted in the comments above wake_up_bit() beginning with:

    In order for this to function properly, as it uses
    waitqueue_active() internally, some kind of memory
    barrier must be done prior to calling this.


Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2013-02-07 09:39:48 -06:00
Dave Chinner
1813dd6405 xfs: convert buffer verifiers to an ops structure.
To separate the verifiers from iodone functions and associate read
and write verifiers at the same time, introduce a buffer verifier
operations structure to the xfs_buf.

This avoids the need for assigning the write verifier, clearing the
iodone function and re-running ioend processing in the read
verifier, and gets rid of the nasty "b_pre_io" name for the write
verifier function pointer. If we ever need to, it will also be
easier to add further content specific callbacks to a buffer with an
ops structure in place.

We also avoid needing to export verifier functions, instead we
can simply export the ops structures for those that are needed
outside the function they are defined in.

This patch also fixes a directory block readahead verifier issue
it exposed.

This patch also adds ops callbacks to the inode/alloc btree blocks
initialised by growfs. These will need more work before they will
work with CRCs.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Phil White <pwhite@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-11-15 21:35:12 -06:00
Dave Chinner
b0f539de9f xfs: connect up write verifiers to new buffers
Metadata buffers that are read from disk have write verifiers
already attached to them, but newly allocated buffers do not. Add
appropriate write verifiers to all new metadata buffers.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-11-15 21:35:09 -06:00
Dave Chinner
612cfbfe17 xfs: add pre-write metadata buffer verifier callbacks
These verifiers are essentially the same code as the read verifiers,
but do not require ioend processing. Hence factor the read verifier
functions and add a new write verifier wrapper that is used as the
callback.

This is done as one large patch for all verifiers rather than one
patch per verifier as the change is largely mechanical. This
includes hooking up the write verifier via the read verifier
function.

Hooking up the write verifier for buffers obtained via
xfs_trans_get_buf() will be done in a separate patch as that touches
code in many different places rather than just the verifier
functions.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-11-15 21:35:02 -06:00
Dave Chinner
3d3e6f64e2 xfs: verify btree blocks as they are read from disk
Add an btree block verify callback function and pass it into the
buffer read functions. Because each different btree block type
requires different verification, add a function to the ops structure
that is called from the generic code.

Also, propagate the verification callback functions through the
readahead functions, and into the external bmap and bulkstat inode
readahead code that uses the generic btree buffer read functions.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Phil White <pwhite@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-11-15 21:34:31 -06:00
Brian Foster
72b53efa4a xfs: create helper to check whether to free eofblocks on inode
This check is used in multiple places to determine whether we
should check for (and potentially free) post EOF blocks on an
inode. Add a helper to consolidate the check.

Note that when we remove an inode from the cache (xfs_inactive()),
we are required to trim post-EOF blocks even if the inode is marked
preallocated or append-only to maintain correct space accounting.
The 'force' parameter to xfs_can_free_eofblocks() specifies whether
we should ignore the prealloc/append-only status of the inode.

Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-11-08 15:22:34 -06:00
Dave Chinner
33479e0542 xfs: remove xfs_iget.c
The inode cache functions remaining in xfs_iget.c can be moved to xfs_icache.c
along with the other inode cache functions. This removes all functionality from
xfs_iget.c, so the file can simply be removed.

This move results in various functions now only having the scope of a single
file (e.g. xfs_inode_free()), so clean up all the definitions and exported
prototypes in xfs_icache.[ch] and xfs_inode.h appropriately.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-10-17 13:42:25 -05:00
Christoph Hellwig
4f59af758f xfs: remove iolock lock classes
Content-Disposition: inline; filename=xfs-remove-iolock-classes

Now that we never take the iolock during inode reclaim we don't need
to play games with lock classes.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-07-29 16:23:51 -05:00
Christoph Hellwig
08358906ed xfs: remove the alloc_done argument to xfs_dialloc
We can simplify check the IO_agbp pointer for being non-NULL instead of
passing another argument through two layers of function calls.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-07-29 16:00:31 -05:00
Christoph Hellwig
129dbc9a2d xfs: remove xfs_inotobp
There is no need to keep this helper around, opencoding it in the only
caller is just as clear.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-07-22 10:55:36 -05:00
Christoph Hellwig
475ee413f3 xfs: merge xfs_itobp into xfs_imap_to_bp
All callers of xfs_imap_to_bp want the dinode pointer, so let's calculate it
inside xfs_imap_to_bp.  Once that is done xfs_itobp becomes a fairly pointless
wrapper which can be replaced with direct calls to xfs_imap_to_bp.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-07-22 10:46:56 -05:00
Dave Chinner
2a0ec1d9ed xfs: move xfs_get_extsz_hint() and kill xfs_rw.h
The only thing left in xfs_rw.h is a function prototype for an inode
function.  Move that to xfs_inode.h, and kill xfs_rw.h.

Also move the function implementing the prototype from xfs_rw.c to
xfs_inode.c so we only have one function left in xfs_rw.c

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-05-14 16:20:58 -05:00
Christoph Hellwig
43ff2122e6 xfs: on-stack delayed write buffer lists
Queue delwri buffers on a local on-stack list instead of a per-buftarg one,
and write back the buffers per-process instead of by waking up xfsbufd.

This is now easily doable given that we have very few places left that write
delwri buffers:

 - log recovery:
	Only done at mount time, and already forcing out the buffers
	synchronously using xfs_flush_buftarg

 - quotacheck:
	Same story.

 - dquot reclaim:
	Writes out dirty dquots on the LRU under memory pressure.  We might
	want to look into doing more of this via xfsaild, but it's already
	more optimal than the synchronous inode reclaim that writes each
	buffer synchronously.

 - xfsaild:
	This is the main beneficiary of the change.  By keeping a local list
	of buffers to write we reduce latency of writing out buffers, and
	more importably we can remove all the delwri list promotions which
	were hitting the buffer cache hard under sustained metadata loads.

The implementation is very straight forward - xfs_buf_delwri_queue now gets
a new list_head pointer that it adds the delwri buffers to, and all callers
need to eventually submit the list using xfs_buf_delwi_submit or
xfs_buf_delwi_submit_nowait.  Buffers that already are on a delwri list are
skipped in xfs_buf_delwri_queue, assuming they already are on another delwri
list.  The biggest change to pass down the buffer list was done to the AIL
pushing. Now that we operate on buffers the trylock, push and pushbuf log
item methods are merged into a single push routine, which tries to lock the
item, and if possible add the buffer that needs writeback to the buffer list.
This leads to much simpler code than the previous split but requires the
individual IOP_PUSH instances to unlock and reacquire the AIL around calls
to blocking routines.

Given that xfsailds now also handle writing out buffers, the conditions for
log forcing and the sleep times needed some small changes.  The most
important one is that we consider an AIL busy as long we still have buffers
to push, and the other one is that we do increment the pushed LSN for
buffers that are under flushing at this moment, but still count them towards
the stuck items for restart purposes.  Without this we could hammer on stuck
items without ever forcing the log and not make progress under heavy random
delete workloads on fast flash storage devices.

[ Dave Chinner:
	- rebase on previous patches.
	- improved comments for XBF_DELWRI_Q handling
	- fix XBF_ASYNC handling in queue submission (test 106 failure)
	- rename delwri submit function buffer list parameters for clarity
	- xfs_efd_item_push() should return XFS_ITEM_PINNED ]

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-05-14 16:20:31 -05:00
Christoph Hellwig
4c46819a80 xfs: do not write the buffer from xfs_iflush
Instead of writing the buffer directly from inside xfs_iflush return it to
the caller and let the caller decide what to do with the buffer.  Also
remove the pincount check in xfs_iflush that all non-blocking callers already
implement and the now unused flags parameter.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-05-14 16:20:28 -05:00
Dave Chinner
5132ba8f2b xfs: don't cache inodes read through bulkstat
When we read inodes via bulkstat, we generally only read them once
and then throw them away - they never get used again. If we retain
them in cache, then it simply causes the working set of inodes and
other cached items to be reclaimed just so the inode cache can grow.

Avoid this problem by marking inodes read by bulkstat not to be
cached and check this flag in .drop_inode to determine whether the
inode should be added to the VFS LRU or not. If the inode lookup
hits an already cached inode, then don't set the flag. If the inode
lookup hits an inode marked with no cache flag, remove the flag and
allow it to be cached once the current reference goes away.

Inodes marked as not cached will get cleaned up by the background
inode reclaim or via memory pressure, so they will still generate
some short term cache pressure. They will, however, be reclaimed
much sooner and in preference to cache hot inodes.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-03-26 17:19:08 -05:00
Christoph Hellwig
8a9c9980f2 xfs: log timestamp updates
Timestamps on regular files are the last metadata that XFS does not update
transactionally.  Now that we use the delaylog mode exclusively and made
the log scode scale extremly well there is no need to bypass that code for
timestamp updates.  Logging all updates allows to drop a lot of code, and
will allow for further performance improvements later on.

Note that this patch drops optimized handling of fdatasync - it will be
added back in a separate commit.

Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-03-13 17:01:15 -05:00