Add a test for the issue when KVM_SET_CLOCK(0) call could cause
TSC page value to go very big because of a signedness issue around
hv_clock->system_time.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210326155551.17446-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When guest time is reset with KVM_SET_CLOCK(0), it is possible for
'hv_clock->system_time' to become a small negative number. This happens
because in KVM_SET_CLOCK handling we set 'kvm->arch.kvmclock_offset' based
on get_kvmclock_ns(kvm) but when KVM_REQ_CLOCK_UPDATE is handled,
kvm_guest_time_update() does (masterclock in use case):
hv_clock.system_time = ka->master_kernel_ns + v->kvm->arch.kvmclock_offset;
And 'master_kernel_ns' represents the last time when masterclock
got updated, it can precede KVM_SET_CLOCK() call. Normally, this is not a
problem, the difference is very small, e.g. I'm observing
hv_clock.system_time = -70 ns. The issue comes from the fact that
'hv_clock.system_time' is stored as unsigned and 'system_time / 100' in
compute_tsc_page_parameters() becomes a very big number.
Use 'master_kernel_ns' instead of get_kvmclock_ns() when masterclock is in
use and get_kvmclock_base_ns() when it's not to prevent 'system_time' from
going negative.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210331124130.337992-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
pvclock_gtod_sync_lock can be taken with interrupts disabled if the
preempt notifier calls get_kvmclock_ns to update the Xen
runstate information:
spin_lock include/linux/spinlock.h:354 [inline]
get_kvmclock_ns+0x25/0x390 arch/x86/kvm/x86.c:2587
kvm_xen_update_runstate+0x3d/0x2c0 arch/x86/kvm/xen.c:69
kvm_xen_update_runstate_guest+0x74/0x320 arch/x86/kvm/xen.c:100
kvm_xen_runstate_set_preempted arch/x86/kvm/xen.h:96 [inline]
kvm_arch_vcpu_put+0x2d8/0x5a0 arch/x86/kvm/x86.c:4062
So change the users of the spinlock to spin_lock_irqsave and
spin_unlock_irqrestore.
Reported-by: syzbot+b282b65c2c68492df769@syzkaller.appspotmail.com
Fixes: 30b5c851af ("KVM: x86/xen: Add support for vCPU runstate information")
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is no need to include changes to vcpu->requests into
the pvclock_gtod_sync_lock critical section. The changes to
the shared data structures (in pvclock_update_vm_gtod_copy)
already occur under the lock.
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fixing nested_vmcb_check_save to avoid all TOC/TOU races
is a bit harder in released kernels, so do the bare minimum
by avoiding that EFER.SVME is cleared. This is problematic
because svm_set_efer frees the data structures for nested
virtualization if EFER.SVME is cleared.
Also check that EFER.SVME remains set after a nested vmexit;
clearing it could happen if the bit is zero in the save area
that is passed to KVM_SET_NESTED_STATE (the save area of the
nested state corresponds to the nested hypervisor's state
and is restored on the next nested vmexit).
Cc: stable@vger.kernel.org
Fixes: 2fcf4876ad ("KVM: nSVM: implement on demand allocation of the nested state")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Avoid races between check and use of the nested VMCB controls. This
for example ensures that the VMRUN intercept is always reflected to the
nested hypervisor, instead of being processed by the host. Without this
patch, it is possible to end up with svm->nested.hsave pointing to
the MSR permission bitmap for nested guests.
This bug is CVE-2021-29657.
Reported-by: Felix Wilhelm <fwilhelm@google.com>
Cc: stable@vger.kernel.org
Fixes: 2fcf4876ad ("KVM: nSVM: implement on demand allocation of the nested state")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- This header file isn't used anymore so drop it.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Rp8S
-----END PGP SIGNATURE-----
Merge tag 'exynos-drm-fixes-for-v5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes
Just one cleanup which drops of_gpio.h inclusion.
- This header file isn't used anymore so drop it.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1617016858-14081-1-git-send-email-inki.dae@samsung.com
The page table of AMDGPU requires an alignment to CPU page so we should
check ioctl parameters for it. Return -EINVAL if some parameter is
unaligned to CPU page, instead of corrupt the page table sliently.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Xi Ruoyao <xry111@mengyan1223.wang>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
In Mesa, dev_info.gart_page_size is used for alignment and it was
set to AMDGPU_GPU_PAGE_SIZE(4KB). However, the page table of AMDGPU
driver requires an alignment on CPU pages. So, for non-4KB page system,
gart_page_size should be max_t(u32, PAGE_SIZE, AMDGPU_GPU_PAGE_SIZE).
Signed-off-by: Rui Wang <wangr@lemote.com>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Link: https://github.com/loongson-community/linux-stable/commit/caa9c0a1
[Xi: rebased for drm-next, use max_t for checkpatch,
and reworded commit message.]
Signed-off-by: Xi Ruoyao <xry111@mengyan1223.wang>
BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1549
Tested-by: Dan Horák <dan@danny.cz>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Do the same thing we do for Renoir. We can check, but since
the sbios has started DPM, it will always return true which
causes the driver to skip some of the SMU init when it shouldn't.
Reviewed-by: Zhan Liu <zhan.liu@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Amdgpu driver uses 4-byte data type as DQM fence memory,
and transmits GPU address of fence memory to microcode
through query status PM4 message. However, query status
PM4 message definition and microcode processing are all
processed according to 8 bytes. Fence memory only allocates
4 bytes of memory, but microcode does write 8 bytes of memory,
so there is a memory corruption.
Changes since v1:
* Change dqm->fence_addr as a u64 pointer to fix this issue,
also fix up query_status and amdkfd_fence_wait_timeout function
uses 64 bit fence value to make them consistent.
Signed-off-by: Qu Huang <jinsdb@126.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
For multiple split bios, if one of the bio is fail, the whole
should return error to application. But we found there is a race
between bio_integrity_verify_fn and bio complete, which return
io success to application after one of the bio fail. The race as
following:
split bio(READ) kworker
nvme_complete_rq
blk_update_request //split error=0
bio_endio
bio_integrity_endio
queue_work(kintegrityd_wq, &bip->bip_work);
bio_integrity_verify_fn
bio_endio //split bio
__bio_chain_endio
if (!parent->bi_status)
<interrupt entry>
nvme_irq
blk_update_request //parent error=7
req_bio_endio
bio->bi_status = 7 //parent bio
<interrupt exit>
parent->bi_status = 0
parent->bi_end_io() // return bi_status=0
The bio has been split as two: split and parent. When split
bio completed, it depends on kworker to do endio, while
bio_integrity_verify_fn have been interrupted by parent bio
complete irq handler. Then, parent bio->bi_status which have
been set in irq handler will overwrite by kworker.
In fact, even without the above race, we also need to conside
the concurrency beteen mulitple split bio complete and update
the same parent bi_status. Normally, multiple split bios will
be issued to the same hctx and complete from the same irq
vector. But if we have updated queue map between multiple split
bios, these bios may complete on different hw queue and different
irq vector. Then the concurrency update parent bi_status may
cause the final status error.
Suggested-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20210331115359.1125679-1-yuyufen@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The function addresses that are traced by ftrace are stored in pages,
and the size is held in a variable. If there's some error in creating
them, the allocate ones will be freed. In this case, it is possible that
the order of pages to be freed may end up being negative due to a size of
zero passed to get_count_order(), and then that negative number will cause
free_pages() to free a very large section. Make sure that does not happen.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYGR30BQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qnbDAP9yEhTLcDRUi3VLWnEq19Dt4Lsg86Bf
QRpbWG6Ze9EbZQEAgYAOe1fsNCNEIMXXh/4nlKVpKKH+vviS0ux9Z6uhpQQ=
=Veyq
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull ftrace fix from Steven Rostedt:
"Add check of order < 0 before calling free_pages()
The function addresses that are traced by ftrace are stored in pages,
and the size is held in a variable. If there's some error in creating
them, the allocate ones will be freed. In this case, it is possible
that the order of pages to be freed may end up being negative due to a
size of zero passed to get_count_order(), and then that negative
number will cause free_pages() to free a very large section.
Make sure that does not happen"
* tag 'trace-v5.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace: Check if pages were allocated before calling free_pages()
- Fix up some Intel GPIO base calculations.
- Fix a register offset in the Microchip driver.
- Fix suspend/resume bug in the Rockchip driver.
- Default pull up strength in the Qualcomm LPASS
driver.
- Fix two pingroup offsets in the Qualcomm SC7280
driver.
- Fix SDC1 register offset in the Qualcomm SC7280
driver.
- Fix a nasty string concatenation in the
Qualcomm SDX55 driver.
- Check the REVID register to see if the device is
real or virtualized during virtualization in the
Intel driver.
-----BEGIN PGP SIGNATURE-----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=+Gsn
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Some overly ripe fixes for the v5.12 kernel. I should have sent
earlier but had my head stuck in GDB.
All are driver fixes:
- Fix up some Intel GPIO base calculations.
- Fix a register offset in the Microchip driver.
- Fix suspend/resume bug in the Rockchip driver.
- Default pull up strength in the Qualcomm LPASS driver.
- Fix two pingroup offsets in the Qualcomm SC7280 driver.
- Fix SDC1 register offset in the Qualcomm SC7280 driver.
- Fix a nasty string concatenation in the Qualcomm SDX55 driver.
- Check the REVID register to see if the device is real or
virtualized during virtualization in the Intel driver"
* tag 'pinctrl-v5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: intel: check REVID register value for device presence
pinctrl: qcom: fix unintentional string concatenation
pinctrl: qcom: sc7280: Fix SDC1_RCLK configurations
pinctrl: qcom: sc7280: Fix SDC_QDSD_PINGROUP and UFS_RESET offsets
pinctrl: qcom: lpass lpi: use default pullup/strength values
pinctrl: rockchip: fix restore error in resume
pinctrl: microchip-sgpio: Fix wrong register offset for IRQ trigger
pinctrl: intel: Show the GPIO base calculation explicitly
syzbot is reporting NULL pointer dereference at reiserfs_security_init()
[1], for commit ab17c4f021 ("reiserfs: fixup xattr_root caching")
is assuming that REISERFS_SB(s)->xattr_root != NULL in
reiserfs_xattr_jcreate_nblocks() despite that commit made
REISERFS_SB(sb)->priv_root != NULL && REISERFS_SB(s)->xattr_root == NULL
case possible.
I guess that commit 6cb4aff0a7 ("reiserfs: fix oops while creating
privroot with selinux enabled") wanted to check xattr_root != NULL
before reiserfs_xattr_jcreate_nblocks(), for the changelog is talking
about the xattr root.
The issue is that while creating the privroot during mount
reiserfs_security_init calls reiserfs_xattr_jcreate_nblocks which
dereferences the xattr root. The xattr root doesn't exist, so we get
an oops.
Therefore, update reiserfs_xattrs_initialized() to check both the
privroot and the xattr root.
Link: https://syzkaller.appspot.com/bug?id=8abaedbdeb32c861dc5340544284167dd0e46cde # [1]
Reported-and-tested-by: syzbot <syzbot+690cb1e51970435f9775@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Fixes: 6cb4aff0a7 ("reiserfs: fix oops while creating privroot with selinux enabled")
Acked-by: Jeff Mahoney <jeffm@suse.com>
Acked-by: Jan Kara <jack@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Don't call into get_signal() with the sqd mutex held, it'll fail if we're
freezing the task and we'll get complaints on locks still being held:
====================================
WARNING: iou-sqp-8386/8387 still has locks held!
5.12.0-rc4-syzkaller #0 Not tainted
------------------------------------
1 lock held by iou-sqp-8386/8387:
#0: ffff88801e1d2470 (&sqd->lock){+.+.}-{3:3}, at: io_sq_thread+0x24c/0x13a0 fs/io_uring.c:6731
stack backtrace:
CPU: 1 PID: 8387 Comm: iou-sqp-8386 Not tainted 5.12.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack+0x141/0x1d7 lib/dump_stack.c:120
try_to_freeze include/linux/freezer.h:66 [inline]
get_signal+0x171a/0x2150 kernel/signal.c:2576
io_sq_thread+0x8d2/0x13a0 fs/io_uring.c:6748
Fold the get_signal() case in with the parking checks, as we need to drop
the lock in both cases, and since we need to be checking for parking when
juggling the lock anyway.
Reported-by: syzbot+796d767eb376810256f5@syzkaller.appspotmail.com
Fixes: dbe1bdbb39 ("io_uring: handle signals for IO threads like a normal thread")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 71da201f38 ("ACPI: scan: Defer enumeration of devices with
_DEP lists") dropped the following 2 lines from acpi_init_device_object():
/* Assume there are unmet deps until acpi_device_dep_initialize() runs */
device->dep_unmet = 1;
Leaving the initial value of dep_unmet at the 0 from the kzalloc(). This
causes the acpi_bus_get_status() call in acpi_add_single_object() to
actually call _STA, even though there maybe unmet deps, leading to errors
like these:
[ 0.123579] ACPI Error: No handler for Region [ECRM] (00000000ba9edc4c)
[GenericSerialBus] (20170831/evregion-166)
[ 0.123601] ACPI Error: Region GenericSerialBus (ID=9) has no handler
(20170831/exfldio-299)
[ 0.123618] ACPI Error: Method parse/execution failed
\_SB.I2C1.BAT1._STA, AE_NOT_EXIST (20170831/psparse-550)
Fix this by re-adding the dep_unmet = 1 initialization to
acpi_init_device_object() and modifying acpi_bus_check_add() to make sure
that dep_unmet always gets setup there, overriding the initial 1 value.
This re-fixes the issue initially fixed by
commit 63347db0af ("ACPI / scan: Use acpi_bus_get_status() to initialize
ACPI_TYPE_DEVICE devs"), which introduced the removed
"device->dep_unmet = 1;" statement.
This issue was noticed; and the fix tested on a Dell Venue 10 Pro 5055.
Fixes: 71da201f38 ("ACPI: scan: Defer enumeration of devices with _DEP lists")
Suggested-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: 5.11+ <stable@vger.kernel.org> # 5.11+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- fix incorrect initialization and update of vdso data pages, which
results in incorrect tod clock steering, and that
clock_gettime(CLOCK_MONOTONIC_RAW, ...) returns incorrect values.
- update MAINTAINERS for s390 vfio drivers
-----BEGIN PGP SIGNATURE-----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=5z4s
-----END PGP SIGNATURE-----
Merge tag 's390-5.12-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- fix incorrect initialization and update of vdso data pages, which
results in incorrect tod clock steering, and that
clock_gettime(CLOCK_MONOTONIC_RAW, ...) returns incorrect values.
- update MAINTAINERS for s390 vfio drivers
* tag 's390-5.12-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
MAINTAINERS: add backups for s390 vfio drivers
s390/vdso: fix initializing and updating of vdso_data
s390/vdso: fix tod_steering_delta type
s390/vdso: copy tod_steering_delta value to vdso_data page
The SOR resets are exclusively shared with the SOR power domain. This
means that exclusive access can only be granted temporarily and in order
for that to work, a rigorous sequence must be observed. To ensure that a
single consumer gets exclusive access to a reset, each consumer must
implement a rigorous protocol using the reset_control_acquire() and
reset_control_release() functions.
However, these functions alone don't provide any guarantees at the
system level. Drivers need to ensure that the only a single consumer has
access to the reset at the same time. In order for the SOR to be able to
exclusively access its reset, it must therefore ensure that the SOR
power domain is not powered off by holding on to a runtime PM reference
to that power domain across the reset assert/deassert operation.
This used to work fine by accident, but was revealed when recently more
devices started to rely on the SOR power domain.
Fixes: 11c632e1cf ("drm/tegra: sor: Implement acquire/release for reset")
Reported-by: Jonathan Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Commit 4bba4c4bb0 added tools/include/linux/compiler_types.h which
includes linux/compiler-gcc.h. Unfortunately, we had our own (empty)
compiler_types.h which overrode the one added by that commit, and
so we lost the definition of __must_be_array(). Removing our empty
compiler_types.h fixes the problem and reduces our divergence from the
rest of the tools.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Splitting an order-4 entry into order-2 entries would leave the array
containing pointers to 000040008000c000 instead of 000044448888cccc.
This is a one-character fix, but enhance the test suite to check this
case.
Reported-by: Zi Yan <ziy@nvidia.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
I wrote the documentation backwards; the new order of the entry is stored
in the xas and the caller passes the old entry.
Reported-by: Zi Yan <ziy@nvidia.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Coupling of display controllers used to rely on runtime PM to take the
companion controller out of reset. Commit fd67e9c6ed ("drm/tegra: Do
not implement runtime PM") accidentally broke this when runtime PM was
removed.
Restore this functionality by reusing the hierarchical host1x client
suspend/resume infrastructure that's similar to runtime PM and which
perfectly fits this use-case.
Fixes: fd67e9c6ed ("drm/tegra: Do not implement runtime PM")
Reported-by: Dmitry Osipenko <digetx@gmail.com>
Reported-by: Paul Fertser <fercerpav@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
To avoid false lockdep warnings, give each client lock a different
lock class, passed from the initialization site by macro.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
RGB output doesn't allow to change parent clock rate of the display and
PCLK rate is set to 0Hz in this case. The tegra_dc_commit_state() shall
not set the display clock to 0Hz since this change propagates to the
parent clock. The DISP clock is defined as a NODIV clock by the tegra-clk
driver and all NODIV clocks use the CLK_SET_RATE_PARENT flag.
This bug stayed unnoticed because by default PLLP is used as the parent
clock for the display controller and PLLP silently skips the erroneous 0Hz
rate changes because it always has active child clocks that don't permit
rate changes. The PLLP isn't acceptable for some devices that we want to
upstream (like Samsung Galaxy Tab and ASUS TF700T) due to a display panel
clock rate requirements that can't be fulfilled by using PLLP and then the
bug pops up in this case since parent clock is set to 0Hz, killing the
display output.
Don't touch DC clock if pclk=0 in order to fix the problem.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Prevent the TDP MMU from yielding when zapping a gfn range during NX
page recovery. If a flush is pending from a previous invocation of the
zapping helper, either in the TDP MMU or the legacy MMU, but the TDP MMU
has not accumulated a flush for the current invocation, then yielding
will release mmu_lock with stale TLB entries.
That being said, this isn't technically a bug fix in the current code, as
the TDP MMU will never yield in this case. tdp_mmu_iter_cond_resched()
will yield if and only if it has made forward progress, as defined by the
current gfn vs. the last yielded (or starting) gfn. Because zapping a
single shadow page is guaranteed to (a) find that page and (b) step
sideways at the level of the shadow page, the TDP iter will break its loop
before getting a chance to yield.
But that is all very, very subtle, and will break at the slightest sneeze,
e.g. zapping while holding mmu_lock for read would break as the TDP MMU
wouldn't be guaranteed to see the present shadow page, and thus could step
sideways at a lower level.
Cc: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210325200119.1359384-4-seanjc@google.com>
[Add lockdep assertion. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Honor the "flush needed" return from kvm_tdp_mmu_zap_gfn_range(), which
does the flush itself if and only if it yields (which it will never do in
this particular scenario), and otherwise expects the caller to do the
flush. If pages are zapped from the TDP MMU but not the legacy MMU, then
no flush will occur.
Fixes: 29cf0f5007 ("kvm: x86/mmu: NX largepage recovery for TDP MMU")
Cc: stable@vger.kernel.org
Cc: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210325200119.1359384-3-seanjc@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When flushing a range of GFNs across multiple roots, ensure any pending
flush from a previous root is honored before yielding while walking the
tables of the current root.
Note, kvm_tdp_mmu_zap_gfn_range() now intentionally overwrites its local
"flush" with the result to avoid redundant flushes. zap_gfn_range()
preserves and return the incoming "flush", unless of course the flush was
performed prior to yielding and no new flush was triggered.
Fixes: 1af4a96025 ("KVM: x86/mmu: Yield in TDU MMU iter even if no SPTES changed")
Cc: stable@vger.kernel.org
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210325200119.1359384-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Building kvm module out-of-source with,
make -C $SRC O=$BIN M=arch/x86/kvm
fails to find "irq.h" as the include dir passed to cflags-y does not
prefix the source dir. Fix this by prefixing $(srctree) to the include
dir path.
Signed-off-by: Siddharth Chandrasekaran <sidcha@amazon.de>
Message-Id: <20210324124347.18336-1-sidcha@amazon.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
hardware_disable_test produces 512 snippets like
...
main: [511] waiting semaphore
run_test: [511] start vcpus
run_test: [511] all threads launched
main: [511] waiting 368us
main: [511] killing child
and this doesn't have much value, let's print this info with pr_debug().
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210323104331.1354800-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
MSR_F15H_PERF_CTL0-5, MSR_F15H_PERF_CTR0-5 MSRs are only available when
X86_FEATURE_PERFCTR_CORE CPUID bit was exposed to the guest. KVM, however,
allows these MSRs unconditionally because kvm_pmu_is_valid_msr() ->
amd_msr_idx_to_pmc() check always passes and because kvm_pmu_set_msr() ->
amd_pmu_set_msr() doesn't fail.
In case of a counter (CTRn), no big harm is done as we only increase
internal PMC's value but in case of an eventsel (CTLn), we go deep into
perf internals with a non-existing counter.
Note, kvm_get_msr_common() just returns '0' when these MSRs don't exist
and this also seems to contradict architectural behavior which is #GP
(I did check one old Opteron host) but changing this status quo is a bit
scarier.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210323084515.1346540-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_write_tsc() was renamed and made static since commit 0c899c25d7
("KVM: x86: do not attempt TSC synchronization on guest writes"). Remove
its unused declaration.
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Message-Id: <20210326070334.12310-1-dongli.zhang@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_msr_ignored_check function never uses vcpu argument. Clean up the
function and invokers.
Signed-off-by: Haiwei Li <lihaiwei@tencent.com>
Message-Id: <20210313051032.4171-1-lihaiwei.kernel@gmail.com>
Reviewed-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If this service is enabled and the system rebooted, Systemd's initial
attempt to start this unit file may fail in case the kvm module is not
loaded. Since we did not specify a delay for the retries, Systemd
restarts with a minimum delay a number of times before giving up and
disabling the service. Which means a subsequent kvm module load will
have kvm running without monitoring.
Adding a delay to fix this.
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com>
Message-Id: <20210325122949.1433271-1-raspl@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are code paths that rely on zero_pfn to be fully initialized
before core_initcall. For example, wq_sysfs_init() is a core_initcall
function that eventually results in a call to kernel_execve, which
causes a page fault with a subsequent mmput. If zero_pfn is not
initialized by then it may not get cleaned up properly and result in an
error:
BUG: Bad rss-counter state mm:(ptrval) type:MM_ANONPAGES val:1
Here is an analysis of the race as seen on a MIPS device. On this
particular MT7621 device (Ubiquiti ER-X), zero_pfn is PFN 0 until
initialized, at which point it becomes PFN 5120:
1. wq_sysfs_init calls into kobject_uevent_env at core_initcall:
kobject_uevent_env+0x7e4/0x7ec
kset_register+0x68/0x88
bus_register+0xdc/0x34c
subsys_virtual_register+0x34/0x78
wq_sysfs_init+0x1c/0x4c
do_one_initcall+0x50/0x1a8
kernel_init_freeable+0x230/0x2c8
kernel_init+0x10/0x100
ret_from_kernel_thread+0x14/0x1c
2. kobject_uevent_env() calls call_usermodehelper_exec() which executes
kernel_execve asynchronously.
3. Memory allocations in kernel_execve cause a page fault, bumping the
MM reference counter:
add_mm_counter_fast+0xb4/0xc0
handle_mm_fault+0x6e4/0xea0
__get_user_pages.part.78+0x190/0x37c
__get_user_pages_remote+0x128/0x360
get_arg_page+0x34/0xa0
copy_string_kernel+0x194/0x2a4
kernel_execve+0x11c/0x298
call_usermodehelper_exec_async+0x114/0x194
4. In case zero_pfn has not been initialized yet, zap_pte_range does
not decrement the MM_ANONPAGES RSS counter and the BUG message is
triggered shortly afterwards when __mmdrop checks the ref counters:
__mmdrop+0x98/0x1d0
free_bprm+0x44/0x118
kernel_execve+0x160/0x1d8
call_usermodehelper_exec_async+0x114/0x194
ret_from_kernel_thread+0x14/0x1c
To avoid races such as described above, initialize init_zero_pfn at
early_initcall level. Depending on the architecture, ZERO_PAGE is
either constant or gets initialized even earlier, at paging_init, so
there is no issue with initializing zero_pfn earlier.
Link: https://lkml.kernel.org/r/CALCv0x2YqOXEAy2Q=hafjhHCtTHVodChv1qpM=niAXOpqEbt7w@mail.gmail.com
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: stable@vger.kernel.org
Tested-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It is possible that on error pg->size can be zero when getting its order,
which would return a -1 value. It is dangerous to pass in an order of -1
to free_pages(). Check if order is greater than or equal to zero before
calling free_pages().
Link: https://lore.kernel.org/lkml/20210330093916.432697c7@gandalf.local.home/
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
With ath79_defconfig enabling CONFIG_MIPS_ELF_APPENDED_DTB gives a
compilation error. This patch fixes it.
Build log:
...
CC kernel/locking/percpu-rwsem.o
../arch/mips/kernel/setup.c:46:39: error: conflicting types for
'__appended_dtb'
const char __section(".appended_dtb") __appended_dtb[0x100000];
^~~~~~~~~~~~~~
In file included from ../arch/mips/kernel/setup.c:34:
../arch/mips/include/asm/bootinfo.h:118:13: note: previous declaration
of '__appended_dtb' was here
extern char __appended_dtb[];
^~~~~~~~~~~~~~
CC fs/attr.o
make[4]: *** [../scripts/Makefile.build:271: arch/mips/kernel/setup.o]
Error 1
...
Root cause seems to be:
Fixes: b83ba0b9df ("MIPS: of: Introduce helper function to get DTB")
Signed-off-by: Mauri Sandberg <sandberg@mailfence.com>
Reviewed-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: trivial@kernel.org
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The HP EliteBook 640 G8 Notebook PC is using ALC236 codec which is
using 0x02 to control mute LED and 0x01 to control micmute LED.
Therefore, add a quirk to make it works.
Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210330114428.40490-1-jeremy.szu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recently added PM prepare and complete callbacks don't have the
sanity check whether the card instance has been properly initialized,
which may potentially lead to Oops.
This patch adds the azx_is_pm_ready() call in each place
appropriately like other PM callbacks.
Fixes: f5dac54d9d ("ALSA: hda: Separate runtime and system suspend")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210329113059.25035-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The card power state change via snd_power_change_state() at the system
suspend/resume seems dropped mistakenly during the PM code rewrite.
The card power state doesn't play much role nowadays but it's still
referred in a few places such as the HDMI codec driver.
This patch restores them, but in a more appropriate place now in the
prepare and complete callbacks.
Fixes: f5dac54d9d ("ALSA: hda: Separate runtime and system suspend")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210329113059.25035-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A kernel panic was observed due to a timing issue between the sync thread
and the initiator processing a login response from the target. The session
reopen can be invoked both from the session sync thread when iscsid
restarts and from iscsid through the error handler. Before the initiator
receives the response to a login, another reopen request can be sent from
the error handler/sync session. When the initial login response is
subsequently processed, the connection has been closed and the socket has
been released.
To fix this a new connection state, ISCSI_CONN_BOUND, is added:
- Set the connection state value to ISCSI_CONN_DOWN upon
iscsi_if_ep_disconnect() and iscsi_if_stop_conn()
- Set the connection state to the newly created value ISCSI_CONN_BOUND
after bind connection (transport->bind_conn())
- In iscsi_set_param(), return -ENOTCONN if the connection state is not
either ISCSI_CONN_BOUND or ISCSI_CONN_UP
Link: https://lore.kernel.org/r/20210325093248.284678-1-gulam.mohamed@oracle.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Gulam Mohamed <gulam.mohamed@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
index 91074fd97f64..f4bf62b007a0 100644
* Check if device is present, which is not the case in Xen
The following is an automated git shortlog grouped by driver:
intel:
- check REVID register value for device presence
-----BEGIN PGP SIGNATURE-----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=s7pI
-----END PGP SIGNATURE-----
Merge tag 'intel-pinctrl-v5.12-3' of gitolite.kernel.org:pub/scm/linux/kernel/git/pinctrl/intel into fixes
intel-pinctrl for v5.12-3
* Check if device is present, which is not the case in Xen
The following is an automated git shortlog grouped by driver:
intel:
- check REVID register value for device presence
