mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-20 10:44:23 +08:00
53f37d1d30
1726 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Greg Ungerer
|
0b98027122 |
m68knommu: fix user a5 register being overwritten
On no-MMU systems the application a5 register can be overwitten with the address of the process data segment when processing application signals. For flat format applications compiled with full absolute relocation this effectively corrupts the a5 register on signal processing - and this very quickly leads to process crash and often takes out the whole system with a panic as well. This has no effect on flat format applications compiled with the more common PIC methods (such as -msep-data). These format applications reserve a5 for the pointer to the data segment anyway - so it doesn't change it. A long time ago the a5 register was used in the code packed into the user stack to enable signal return processing. And so it had to be restored on end of signal cleanup processing back to the original a5 user value. This was historically done by saving away a5 in the sigcontext structure. At some point (a long time back it seems) the a5 restore process was changed and it was hard coded to put the user data segment address directly into a5. Which is ok for the common PIC compiled application case, but breaks the full relocation application code. We no longer use this type of signal handling mechanism and so we don't need to do anything special to save and restore a5 at all now. So remove the code that hard codes a5 to the address of the user data segment. Signed-off-by: Greg Ungerer <gerg@linux-m68k.org> |
||
Linus Torvalds
|
6c84239d59 |
RTC for 4.8
Cleanups:
- huge cleanup of rtc-generic and char/genrtc this allowed to cleanup rtc-cmos,
rtc-sh, rtc-m68k, rtc-powerpc and rtc-parisc
- move mn10300 to rtc-cmos
Subsystem:
- fix wakealarms after hibernate
- multiples fixes for rctest
- simplify implementations of .read_alarm
New drivers:
- Maxim MAX6916
Drivers:
- ds1307: fix weekday
- m41t80: add wakeup support
- pcf85063: add support for PCF85063A variant
- rv8803: extend i2c fix and other fixes
- s35390a: fix alarm reading, this fixes instant reboot after shutdown for QNAP
TS-41x
- s3c: clock fixes
-----BEGIN PGP SIGNATURE-----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=rpGB
-----END PGP SIGNATURE-----
Merge tag 'rtc-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"RTC for 4.8
Cleanups:
- huge cleanup of rtc-generic and char/genrtc this allowed to cleanup
rtc-cmos, rtc-sh, rtc-m68k, rtc-powerpc and rtc-parisc
- move mn10300 to rtc-cmos
Subsystem:
- fix wakealarms after hibernate
- multiples fixes for rctest
- simplify implementations of .read_alarm
New drivers:
- Maxim MAX6916
Drivers:
- ds1307: fix weekday
- m41t80: add wakeup support
- pcf85063: add support for PCF85063A variant
- rv8803: extend i2c fix and other fixes
- s35390a: fix alarm reading, this fixes instant reboot after
shutdown for QNAP TS-41x
- s3c: clock fixes"
* tag 'rtc-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (65 commits)
rtc: rv8803: Clear V1F when setting the time
rtc: rv8803: Stop the clock while setting the time
rtc: rv8803: Always apply the I²C workaround
rtc: rv8803: Fix read day of week
rtc: rv8803: Remove the check for valid time
rtc: rv8803: Kconfig: Indicate rx8900 support
rtc: asm9260: remove .owner field for driver
rtc: at91sam9: Fix missing spin_lock_init()
rtc: m41t80: add suspend handlers for alarm IRQ
rtc: m41t80: make it a real error message
rtc: pcf85063: Add support for the PCF85063A device
rtc: pcf85063: fix year range
rtc: hym8563: in .read_alarm set .tm_sec to 0 to signal minute accuracy
rtc: explicitly set tm_sec = 0 for drivers with minute accurancy
rtc: s3c: Add s3c_rtc_{enable/disable}_clk in s3c_rtc_setfreq()
rtc: s3c: Remove unnecessary call to disable already disabled clock
rtc: abx80x: use devm_add_action_or_reset()
rtc: m41t80: use devm_add_action_or_reset()
rtc: fix a typo and reduce three empty lines to one
rtc: s35390a: improve two comments in .set_alarm
...
|
||
|
Linus Torvalds
|
8e7106a607 |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu updates from Greg Ungerer: "This series is all about Nicolas flat format support for MMU systems. Traditional m68k no-MMU flat format binaries can now be run on m68k MMU enabled systems too. The series includes some nice cleanups of the binfmt_flat code and converts it to using proper user space accessor functions. With all this in place you can boot and run a complete no-MMU flat format based user space on an MMU enabled system" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68k: enable binfmt_flat on systems with an MMU binfmt_flat: allow compressed flat binary format to work on MMU systems binfmt_flat: add MMU-specific support binfmt_flat: update libraries' data segment pointer with userspace accessors binfmt_flat: use clear_user() rather than memset() to clear .bss binfmt_flat: use proper user space accessors with old relocs code binfmt_flat: use proper user space accessors with relocs processing code binfmt_flat: clean up create_flat_tables() and stack accesses binfmt_flat: use generic transfer_args_to_stack() elf_fdpic_transfer_args_to_stack(): make it generic binfmt_flat: prevent kernel dammage from corrupted executable headers binfmt_flat: convert printk invocations to their modern form binfmt_flat: assorted cleanups m68k: use same start_thread() on MMU and no-MMU m68k: fix file path comment m68k: fix bFLT executable running on MMU enabled systems |
||
Krzysztof Kozlowski
|
00085f1efa |
dma-mapping: use unsigned long for dma_attrs
The dma-mapping core and the implementations do not change the DMA
attributes passed by pointer. Thus the pointer can point to const data.
However the attributes do not have to be a bitfield. Instead unsigned
long will do fine:
1. This is just simpler. Both in terms of reading the code and setting
attributes. Instead of initializing local attributes on the stack
and passing pointer to it to dma_set_attr(), just set the bits.
2. It brings safeness and checking for const correctness because the
attributes are passed by value.
Semantic patches for this change (at least most of them):
virtual patch
virtual context
@r@
identifier f, attrs;
@@
f(...,
- struct dma_attrs *attrs
+ unsigned long attrs
, ...)
{
...
}
@@
identifier r.f;
@@
f(...,
- NULL
+ 0
)
and
// Options: --all-includes
virtual patch
virtual context
@r@
identifier f, attrs;
type t;
@@
t f(..., struct dma_attrs *attrs);
@@
identifier r.f;
@@
f(...,
- NULL
+ 0
)
Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.com
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no>
Acked-by: Mark Salter <msalter@redhat.com> [c6x]
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> [cris]
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> [drm]
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Acked-by: Joerg Roedel <jroedel@suse.de> [iommu]
Acked-by: Fabien Dessenne <fabien.dessenne@st.com> [bdisp]
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> [vb2-core]
Acked-by: David Vrabel <david.vrabel@citrix.com> [xen]
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [xen swiotlb]
Acked-by: Joerg Roedel <jroedel@suse.de> [iommu]
Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon]
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390]
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> [avr32]
Acked-by: Vineet Gupta <vgupta@synopsys.com> [arc]
Acked-by: Robin Murphy <robin.murphy@arm.com> [arm64 and dma-iommu]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
Nicolas Pitre
|
002d2f01f1 |
m68k: enable binfmt_flat on systems with an MMU
Now that the generic changes are in place, this can be enabled on m68k with the use of proper user space accessors in the flat_get_addr_from_rp() and flat_put_addr_at_rp() handlers as rp actually holds a user space address. Signed-off-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org> |
||
Kirill A. Shutemov
|
dcddffd41d |
mm: do not pass mm_struct into handle_mm_fault
We always have vma->vm_mm around. Link: http://lkml.kernel.org/r/1466021202-61880-8-git-send-email-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
c86ad14d30 |
Merge branch 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"The locking tree was busier in this cycle than the usual pattern - a
couple of major projects happened to coincide.
The main changes are:
- implement the atomic_fetch_{add,sub,and,or,xor}() API natively
across all SMP architectures (Peter Zijlstra)
- add atomic_fetch_{inc/dec}() as well, using the generic primitives
(Davidlohr Bueso)
- optimize various aspects of rwsems (Jason Low, Davidlohr Bueso,
Waiman Long)
- optimize smp_cond_load_acquire() on arm64 and implement LSE based
atomic{,64}_fetch_{add,sub,and,andnot,or,xor}{,_relaxed,_acquire,_release}()
on arm64 (Will Deacon)
- introduce smp_acquire__after_ctrl_dep() and fix various barrier
mis-uses and bugs (Peter Zijlstra)
- after discovering ancient spin_unlock_wait() barrier bugs in its
implementation and usage, strengthen its semantics and update/fix
usage sites (Peter Zijlstra)
- optimize mutex_trylock() fastpath (Peter Zijlstra)
- ... misc fixes and cleanups"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (67 commits)
locking/atomic: Introduce inc/dec variants for the atomic_fetch_$op() API
locking/barriers, arch/arm64: Implement LDXR+WFE based smp_cond_load_acquire()
locking/static_keys: Fix non static symbol Sparse warning
locking/qspinlock: Use __this_cpu_dec() instead of full-blown this_cpu_dec()
locking/atomic, arch/tile: Fix tilepro build
locking/atomic, arch/m68k: Remove comment
locking/atomic, arch/arc: Fix build
locking/Documentation: Clarify limited control-dependency scope
locking/atomic, arch/rwsem: Employ atomic_long_fetch_add()
locking/atomic, arch/qrwlock: Employ atomic_fetch_add_acquire()
locking/atomic, arch/mips: Convert to _relaxed atomics
locking/atomic, arch/alpha: Convert to _relaxed atomics
locking/atomic: Remove the deprecated atomic_{set,clear}_mask() functions
locking/atomic: Remove linux/atomic.h:atomic_fetch_or()
locking/atomic: Implement atomic{,64,_long}_fetch_{add,sub,and,andnot,or,xor}{,_relaxed,_acquire,_release}()
locking/atomic: Fix atomic64_relaxed() bits
locking/atomic, arch/xtensa: Implement atomic_fetch_{add,sub,and,or,xor}()
locking/atomic, arch/x86: Implement atomic{,64}_fetch_{add,sub,and,or,xor}()
locking/atomic, arch/tile: Implement atomic{,64}_fetch_{add,sub,and,or,xor}()
locking/atomic, arch/sparc: Implement atomic{,64}_fetch_{add,sub,and,or,xor}()
...
|
||
|
Greg Ungerer
|
f987e5a13c |
m68k: use same start_thread() on MMU and no-MMU
The MMU and no-MMU versions of start_thread() are now identical, so use the same common code for both. Signed-off-by: Greg Ungerer <gerg@linux-m68k.org> |
||
|
Greg Ungerer
|
120c4d95b2 |
m68k: fix file path comment
Remove the wrong full path name of this file. Signed-off-by: Greg Ungerer <gerg@linux-m68k.org> |
||
|
Greg Ungerer
|
89e6ffd9f0 |
m68k: fix bFLT executable running on MMU enabled systems
Even after recent changes to support running flat format executables on MMU enabled systems (by nicolas.pitre@linaro.org) they still failed to run on m68k/ColdFire MMU enabled systems. On trying to run a flat format binary the application would immediately crash with a SIGSEGV. Code to setup the D5 register with the base of the application data region was only in the non-MMU code path, so it was not being set for the MMU enabled case. Flat binaries on m68k/ColdFire use this to support GOT/PIC flat built application code. Fix this so that D5 is always setup when loading/running a bFLT executable on m68k systems. Signed-off-by: Greg Ungerer <gerg@linux-m68k.org> |
||
|
Linus Torvalds
|
23218843d9 |
m68k updates for 4.8
- Assorted spelling fixes, - Defconfig updates. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJXjzcEAAoJEEgEtLw/Ve77Hc0P/15Bug+gPDioVBmqQuOxepa0 XhvgyrFPAnC32v8KIvQAreku1rw5FP5wJOA+dkUv4IYeqDqy0u3urZvyspjy7Lti VB9kZmuTHuBQWnZmvf48kUdLpKCz5vgpSYepzS89EikKbHS/ASjQ7iso803w2vSC gZ+lzFHYJHQkdWleEuHpWacL3hEQcmzAoX2uy6IF07Y9zQQZLCE2iy2RJB7qjqD1 ENBRns2CuisYhuTQrtCE3IIxStkqtARX7uaBBXirn34pkvBDOauYIXGYArbop1Xg JWS61L1MeVGIhHb1jH5Eo/FFZmK4pz+3KinQbGAYlwn+3q59Yotsrk3ibKExsVBs mE0CiuKPEHwGUXmHMkRs+gfuVBMWS7jOrVbIzhTDcSeeS3BSrUYVwNs6HBzVR1V9 TVifTqIgW9tC3ffqwjNKPVOstF+9nlfUn4AAzQ8PDtvEeVeTehqXymzi9Jx+BQnE jQ+zA0PWDZ+A68QxwqBVLSTL4t3NonFDVQE4e/VjlKZWUgrLTifTHfjaJNTzOuUk rZy18+pSLFW1tf3f0PmsPDtZZhiYHoTOejP8emUyBXampgj+VdyoFeUSi5Fon6t+ h5M2qPxlWy46LWH2CZ3p5QZZSILIKcqFr7FTMKxlScpbFe0e+ll9Nn/xHXLrta3o LnAPx+lQf0jKcmTX9Rdt =j3fG -----END PGP SIGNATURE----- Merge tag 'm68k-for-v4.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k upddates from Geert Uytterhoeven: - assorted spelling fixes - defconfig updates * tag 'm68k-for-v4.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k/defconfig: Update defconfigs for v4.7-rc2 m68k: Assorted spelling fixes |
||
Geert Uytterhoeven
|
6bd80f3723 |
m68k/defconfig: Update defconfigs for v4.7-rc2
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> |
||
Andrea Gelmini
|
86a8280a7f |
m68k: Assorted spelling fixes
- s/acccess/access/ - s/accoding/according/ - s/addad/added/ - s/addreess/address/ - s/allocatiom/allocation/ - s/Assember/Assembler/ - s/compactnes/compactness/ - s/conneced/connected/ - s/decending/descending/ - s/diectly/directly/ - s/diplacement/displacement/ Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> [geert: Squashed, fix arch/m68k/ifpsp060/src/pfpsp.S] Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> |
||
Michal Hocko
|
32d6bd9059 |
tree wide: get rid of __GFP_REPEAT for order-0 allocations part I
This is the third version of the patchset previously sent [1]. I have basically only rebased it on top of 4.7-rc1 tree and dropped "dm: get rid of superfluous gfp flags" which went through dm tree. I am sending it now because it is tree wide and chances for conflicts are reduced considerably when we want to target rc2. I plan to send the next step and rename the flag and move to a better semantic later during this release cycle so we will have a new semantic ready for 4.8 merge window hopefully. Motivation: While working on something unrelated I've checked the current usage of __GFP_REPEAT in the tree. It seems that a majority of the usage is and always has been bogus because __GFP_REPEAT has always been about costly high order allocations while we are using it for order-0 or very small orders very often. It seems that a big pile of them is just a copy&paste when a code has been adopted from one arch to another. I think it makes some sense to get rid of them because they are just making the semantic more unclear. Please note that GFP_REPEAT is documented as * __GFP_REPEAT: Try hard to allocate the memory, but the allocation attempt * _might_ fail. This depends upon the particular VM implementation. while !costly requests have basically nofail semantic. So one could reasonably expect that order-0 request with __GFP_REPEAT will not loop for ever. This is not implemented right now though. I would like to move on with __GFP_REPEAT and define a better semantic for it. $ git grep __GFP_REPEAT origin/master | wc -l 111 $ git grep __GFP_REPEAT | wc -l 36 So we are down to the third after this patch series. The remaining places really seem to be relying on __GFP_REPEAT due to large allocation requests. This still needs some double checking which I will do later after all the simple ones are sorted out. I am touching a lot of arch specific code here and I hope I got it right but as a matter of fact I even didn't compile test for some archs as I do not have cross compiler for them. Patches should be quite trivial to review for stupid compile mistakes though. The tricky parts are usually hidden by macro definitions and thats where I would appreciate help from arch maintainers. [1] http://lkml.kernel.org/r/1461849846-27209-1-git-send-email-mhocko@kernel.org This patch (of 19): __GFP_REPEAT has a rather weak semantic but since it has been introduced around 2.6.12 it has been ignored for low order allocations. Yet we have the full kernel tree with its usage for apparently order-0 allocations. This is really confusing because __GFP_REPEAT is explicitly documented to allow allocation failures which is a weaker semantic than the current order-0 has (basically nofail). Let's simply drop __GFP_REPEAT from those places. This would allow to identify place which really need allocator to retry harder and formulate a more specific semantic for what the flag is supposed to do actually. Link: http://lkml.kernel.org/r/1464599699-30131-2-git-send-email-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chen Liqin <liqin.linux@gmail.com> Cc: Chris Metcalf <cmetcalf@mellanox.com> [for tile] Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: John Crispin <blogic@openwrt.org> Cc: Lennox Wu <lennox.wu@gmail.com> Cc: Ley Foon Tan <lftan@altera.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Peter Zijlstra
|
86a664d58f |
locking/atomic, arch/m68k: Remove comment
I misread the inline asm. It uses a rare construct to provide an input to a previously declared output to do the atomic_read(). Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andreas Schwab <schwab@linux-m68k.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Cc: linux-m68k@lists.linux-m68k.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Peter Zijlstra
|
b53d6bedbe |
locking/atomic: Remove linux/atomic.h:atomic_fetch_or()
Since all architectures have this implemented now natively, remove this dead code. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Peter Zijlstra
|
e39d88ea3c |
locking/atomic, arch/m68k: Implement atomic_fetch_{add,sub,and,or,xor}()
Implement FETCH-OP atomic primitives, these are very similar to the existing OP-RETURN primitives we already have, except they return the value of the atomic variable _before_ modification. This is especially useful for irreversible operations -- such as bitops (because it becomes impossible to reconstruct the state prior to modification). Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-m68k@lists.linux-m68k.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
Arnd Bergmann
|
084b3600e2 |
char/genrtc: remove m68k support
The asm/rtc.h header is only used for the old gen_rtc driver that has been replaced by rtc-generic. According to Geert Uytterhoeven, nobody has used the old driver on m68k for a long time, so we can now just remove the header file and disallow the driver in Kconfig. All files that used to include asm/rtc.h are now changed so they include the headers that were used implicitly through asm/rtc.h. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> |
||
|
Arnd Bergmann
|
598e8a1fb5 |
rtc: m68k: provide ioctl for q40
The q40 platform is the only machine in the kernel that provides RTC_PLL_GET/RTC_PLL_SET ioctl commands in its rtc through the mach_get_rtc_pll/mach_set_rtc_pll callbacks. However, this currenctly works only in the old-style genrtc driver, not the (somewhat) modern rtc-generic driver replacing it. This adds an ioctl implementation to the m68k generic_rtc_ops in order to let both drivers provide the same API. After this, we should be able to remove support for genrtc from the m68k architecture. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> |
||
|
Arnd Bergmann
|
923c904c33 |
rtc: m68k: provide rtc_class_ops directly
The rtc-generic driver provides an architecture specific wrapper on top of the generic rtc_class_ops abstraction, and m68k has another abstraction on top, which is a bit silly. This changes the m68k rtc-generic device to provide its rtc_class_ops directly, to reduce the number of layers by one. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> |
||
|
Linus Torvalds
|
7e0fb73c52 |
Merge branch 'hash' of git://ftp.sciencehorizons.net/linux
Pull string hash improvements from George Spelvin:
"This series does several related things:
- Makes the dcache hash (fs/namei.c) useful for general kernel use.
(Thanks to Bruce for noticing the zero-length corner case)
- Converts the string hashes in <linux/sunrpc/svcauth.h> to use the
above.
- Avoids 64-bit multiplies in hash_64() on 32-bit platforms. Two
32-bit multiplies will do well enough.
- Rids the world of the bad hash multipliers in hash_32.
This finishes the job started in commit
|
||
George Spelvin
|
14c44b95b3 |
m68k: Add <asm/hash.h>
This provides a multiply by constant GOLDEN_RATIO_32 = 0x61C88647 for the original mc68000, which lacks a 32x32-bit multiply instruction. Yes, the amount of optimization effort put in is excessive. :-) Shift-add chain found by Yevgen Voronenko's Hcub algorithm at http://spiral.ece.cmu.edu/mcm/gen.html Signed-off-by: George Spelvin <linux@sciencehorizons.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Andreas Schwab <schwab@linux-m68k.org> Cc: Philippe De Muyter <phdm@macq.eu> Cc: linux-m68k@lists.linux-m68k.org |
||
Zhaoxiu Zeng
|
fff7fb0b2d |
lib/GCD.c: use binary GCD algorithm instead of Euclidean
The binary GCD algorithm is based on the following facts:
1. If a and b are all evens, then gcd(a,b) = 2 * gcd(a/2, b/2)
2. If a is even and b is odd, then gcd(a,b) = gcd(a/2, b)
3. If a and b are all odds, then gcd(a,b) = gcd((a-b)/2, b) = gcd((a+b)/2, b)
Even on x86 machines with reasonable division hardware, the binary
algorithm runs about 25% faster (80% the execution time) than the
division-based Euclidian algorithm.
On platforms like Alpha and ARMv6 where division is a function call to
emulation code, it's even more significant.
There are two variants of the code here, depending on whether a fast
__ffs (find least significant set bit) instruction is available. This
allows the unpredictable branches in the bit-at-a-time shifting loop to
be eliminated.
If fast __ffs is not available, the "even/odd" GCD variant is used.
I use the following code to benchmark:
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <string.h>
#include <time.h>
#include <unistd.h>
#define swap(a, b) \
do { \
a ^= b; \
b ^= a; \
a ^= b; \
} while (0)
unsigned long gcd0(unsigned long a, unsigned long b)
{
unsigned long r;
if (a < b) {
swap(a, b);
}
if (b == 0)
return a;
while ((r = a % b) != 0) {
a = b;
b = r;
}
return b;
}
unsigned long gcd1(unsigned long a, unsigned long b)
{
unsigned long r = a | b;
if (!a || !b)
return r;
b >>= __builtin_ctzl(b);
for (;;) {
a >>= __builtin_ctzl(a);
if (a == b)
return a << __builtin_ctzl(r);
if (a < b)
swap(a, b);
a -= b;
}
}
unsigned long gcd2(unsigned long a, unsigned long b)
{
unsigned long r = a | b;
if (!a || !b)
return r;
r &= -r;
while (!(b & r))
b >>= 1;
for (;;) {
while (!(a & r))
a >>= 1;
if (a == b)
return a;
if (a < b)
swap(a, b);
a -= b;
a >>= 1;
if (a & r)
a += b;
a >>= 1;
}
}
unsigned long gcd3(unsigned long a, unsigned long b)
{
unsigned long r = a | b;
if (!a || !b)
return r;
b >>= __builtin_ctzl(b);
if (b == 1)
return r & -r;
for (;;) {
a >>= __builtin_ctzl(a);
if (a == 1)
return r & -r;
if (a == b)
return a << __builtin_ctzl(r);
if (a < b)
swap(a, b);
a -= b;
}
}
unsigned long gcd4(unsigned long a, unsigned long b)
{
unsigned long r = a | b;
if (!a || !b)
return r;
r &= -r;
while (!(b & r))
b >>= 1;
if (b == r)
return r;
for (;;) {
while (!(a & r))
a >>= 1;
if (a == r)
return r;
if (a == b)
return a;
if (a < b)
swap(a, b);
a -= b;
a >>= 1;
if (a & r)
a += b;
a >>= 1;
}
}
static unsigned long (*gcd_func[])(unsigned long a, unsigned long b) = {
gcd0, gcd1, gcd2, gcd3, gcd4,
};
#define TEST_ENTRIES (sizeof(gcd_func) / sizeof(gcd_func[0]))
#if defined(__x86_64__)
#define rdtscll(val) do { \
unsigned long __a,__d; \
__asm__ __volatile__("rdtsc" : "=a" (__a), "=d" (__d)); \
(val) = ((unsigned long long)__a) | (((unsigned long long)__d)<<32); \
} while(0)
static unsigned long long benchmark_gcd_func(unsigned long (*gcd)(unsigned long, unsigned long),
unsigned long a, unsigned long b, unsigned long *res)
{
unsigned long long start, end;
unsigned long long ret;
unsigned long gcd_res;
rdtscll(start);
gcd_res = gcd(a, b);
rdtscll(end);
if (end >= start)
ret = end - start;
else
ret = ~0ULL - start + 1 + end;
*res = gcd_res;
return ret;
}
#else
static inline struct timespec read_time(void)
{
struct timespec time;
clock_gettime(CLOCK_PROCESS_CPUTIME_ID, &time);
return time;
}
static inline unsigned long long diff_time(struct timespec start, struct timespec end)
{
struct timespec temp;
if ((end.tv_nsec - start.tv_nsec) < 0) {
temp.tv_sec = end.tv_sec - start.tv_sec - 1;
temp.tv_nsec = 1000000000ULL + end.tv_nsec - start.tv_nsec;
} else {
temp.tv_sec = end.tv_sec - start.tv_sec;
temp.tv_nsec = end.tv_nsec - start.tv_nsec;
}
return temp.tv_sec * 1000000000ULL + temp.tv_nsec;
}
static unsigned long long benchmark_gcd_func(unsigned long (*gcd)(unsigned long, unsigned long),
unsigned long a, unsigned long b, unsigned long *res)
{
struct timespec start, end;
unsigned long gcd_res;
start = read_time();
gcd_res = gcd(a, b);
end = read_time();
*res = gcd_res;
return diff_time(start, end);
}
#endif
static inline unsigned long get_rand()
{
if (sizeof(long) == 8)
return (unsigned long)rand() << 32 | rand();
else
return rand();
}
int main(int argc, char **argv)
{
unsigned int seed = time(0);
int loops = 100;
int repeats = 1000;
unsigned long (*res)[TEST_ENTRIES];
unsigned long long elapsed[TEST_ENTRIES];
int i, j, k;
for (;;) {
int opt = getopt(argc, argv, "n:r:s:");
/* End condition always first */
if (opt == -1)
break;
switch (opt) {
case 'n':
loops = atoi(optarg);
break;
case 'r':
repeats = atoi(optarg);
break;
case 's':
seed = strtoul(optarg, NULL, 10);
break;
default:
/* You won't actually get here. */
break;
}
}
res = malloc(sizeof(unsigned long) * TEST_ENTRIES * loops);
memset(elapsed, 0, sizeof(elapsed));
srand(seed);
for (j = 0; j < loops; j++) {
unsigned long a = get_rand();
/* Do we have args? */
unsigned long b = argc > optind ? strtoul(argv[optind], NULL, 10) : get_rand();
unsigned long long min_elapsed[TEST_ENTRIES];
for (k = 0; k < repeats; k++) {
for (i = 0; i < TEST_ENTRIES; i++) {
unsigned long long tmp = benchmark_gcd_func(gcd_func[i], a, b, &res[j][i]);
if (k == 0 || min_elapsed[i] > tmp)
min_elapsed[i] = tmp;
}
}
for (i = 0; i < TEST_ENTRIES; i++)
elapsed[i] += min_elapsed[i];
}
for (i = 0; i < TEST_ENTRIES; i++)
printf("gcd%d: elapsed %llu\n", i, elapsed[i]);
k = 0;
srand(seed);
for (j = 0; j < loops; j++) {
unsigned long a = get_rand();
unsigned long b = argc > optind ? strtoul(argv[optind], NULL, 10) : get_rand();
for (i = 1; i < TEST_ENTRIES; i++) {
if (res[j][i] != res[j][0])
break;
}
if (i < TEST_ENTRIES) {
if (k == 0) {
k = 1;
fprintf(stderr, "Error:\n");
}
fprintf(stderr, "gcd(%lu, %lu): ", a, b);
for (i = 0; i < TEST_ENTRIES; i++)
fprintf(stderr, "%ld%s", res[j][i], i < TEST_ENTRIES - 1 ? ", " : "\n");
}
}
if (k == 0)
fprintf(stderr, "PASS\n");
free(res);
return 0;
}
Compiled with "-O2", on "VirtualBox 4.4.0-22-generic #38-Ubuntu x86_64" got:
zhaoxiuzeng@zhaoxiuzeng-VirtualBox:~/develop$ ./gcd -r 500000 -n 10
gcd0: elapsed 10174
gcd1: elapsed 2120
gcd2: elapsed 2902
gcd3: elapsed 2039
gcd4: elapsed 2812
PASS
zhaoxiuzeng@zhaoxiuzeng-VirtualBox:~/develop$ ./gcd -r 500000 -n 10
gcd0: elapsed 9309
gcd1: elapsed 2280
gcd2: elapsed 2822
gcd3: elapsed 2217
gcd4: elapsed 2710
PASS
zhaoxiuzeng@zhaoxiuzeng-VirtualBox:~/develop$ ./gcd -r 500000 -n 10
gcd0: elapsed 9589
gcd1: elapsed 2098
gcd2: elapsed 2815
gcd3: elapsed 2030
gcd4: elapsed 2718
PASS
zhaoxiuzeng@zhaoxiuzeng-VirtualBox:~/develop$ ./gcd -r 500000 -n 10
gcd0: elapsed 9914
gcd1: elapsed 2309
gcd2: elapsed 2779
gcd3: elapsed 2228
gcd4: elapsed 2709
PASS
[akpm@linux-foundation.org: avoid #defining a CONFIG_ variable]
Signed-off-by: Zhaoxiu Zeng <zhaoxiu.zeng@gmail.com>
Signed-off-by: George Spelvin <linux@horizon.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
Jiri Slaby
|
5f56a5dfdb |
exit_thread: remove empty bodies
Define HAVE_EXIT_THREAD for archs which want to do something in exit_thread. For others, let's define exit_thread as an empty inline. This is a cleanup before we change the prototype of exit_thread to accept a task parameter. [akpm@linux-foundation.org: fix mips] Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: "David S. Miller" <davem@davemloft.net> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chen Liqin <liqin.linux@gmail.com> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Chris Zankel <chris@zankel.net> Cc: David Howells <dhowells@redhat.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: James Hogan <james.hogan@imgtec.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Jonas Bonn <jonas@southpole.se> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: Lennox Wu <lennox.wu@gmail.com> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Mikael Starvik <starvik@axis.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@arm.linux.org.uk> Cc: Steven Miao <realmz6@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
1eccc6e152 |
This is the bulk of GPIO changes for kernel cycle v4.7:
Core infrastructural changes:
- Support for natively single-ended GPIO driver stages. This
means that if the hardware has registers to configure open
drain or open source configuration, we use that rather than
(as we did before) try to emulate it by switching the line
to an input to get high impedance. This is also documented
throughly in Documentation/gpio/driver.txt for those of you
who did not understand one word of what I just wrote.
- Start to do away with the unnecessarily complex and
unitelligible ARCH_REQUIRE_GPIOLIB and
ARCH_WANT_OPTIONAL_GPIOLIB, another evolutional artifact from
the time when the GPIO subsystem was unmaintained. Archs can
now just select GPIOLIB and be done with it, cleanups to
arches will trickle in for the next kernel. Some minor archs
ACKed the changes immediately so these are included in this
pull request.
- Advancing the use of the data pointer inside the GPIO device
for storing driver data by switching the PowerPC, Super-H
Unicore and a few other subarches or subsystem drivers in
ALSA SoC, Input, serial, SSB, staging etc to use it.
- The initialization now reads the input/output state of the
GPIO lines, so that each GPIO descriptor knows - if this
callback is implemented - whether the line is input or
output. This also reflects nicely in userspace "lsgpio".
- It is now possible to name GPIO producer names, line names,
from the device tree. (Platform data has been supported for
a while.) I bet we will get a similar mechanism for ACPI
one of those days. This makes is possible to get sensible
producer names for e.g. GPIO rails in "lsgpio" in userspace.
New drivers:
- New driver for the Loongson1.
- The XLP driver now supports Broadcom Vulcan ARM64.
- The IT87 driver now supports IT8620 and IT8628.
- The PCA953X driver now supports Galileo Gen2.
Driver improvements:
- MCP23S08 was switched to use the gpiolib irqchip helpers and
now also suppors level-triggered interrupts.
- 74x164 and RCAR now supports the .set_multiple() callback
- AMDPT was converted to use generic GPIO.
- TC3589x, TPS65218, SX150X, F7188X, MENZ127, VX855, WM831X, WM8994
support the new single ended callback for open drain
and in some cases open source.
- Implement the .get_direction() callback for a few more drivers
like PL061, Xgene.
Cleanups:
- Paul Gortmaker combed through the drivers and de-modularized
those who are not really modules.
- Move the GPIO poweroff DT bindings to the power subdir where
they belong.
- Rename gpio-generic.c to gpio-mmio.c, which is much more to the
point. That's what it is handling, nothing more, nothing less.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=z4d6
-----END PGP SIGNATURE-----
Merge tag 'gpio-v4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO updates from Linus Walleij:
"This is the bulk of GPIO changes for kernel cycle v4.7:
Core infrastructural changes:
- Support for natively single-ended GPIO driver stages.
This means that if the hardware has registers to configure open
drain or open source configuration, we use that rather than (as we
did before) try to emulate it by switching the line to an input to
get high impedance.
This is also documented throughly in Documentation/gpio/driver.txt
for those of you who did not understand one word of what I just
wrote.
- Start to do away with the unnecessarily complex and unitelligible
ARCH_REQUIRE_GPIOLIB and ARCH_WANT_OPTIONAL_GPIOLIB, another
evolutional artifact from the time when the GPIO subsystem was
unmaintained.
Archs can now just select GPIOLIB and be done with it, cleanups to
arches will trickle in for the next kernel. Some minor archs ACKed
the changes immediately so these are included in this pull request.
- Advancing the use of the data pointer inside the GPIO device for
storing driver data by switching the PowerPC, Super-H Unicore and
a few other subarches or subsystem drivers in ALSA SoC, Input,
serial, SSB, staging etc to use it.
- The initialization now reads the input/output state of the GPIO
lines, so that each GPIO descriptor knows - if this callback is
implemented - whether the line is input or output. This also
reflects nicely in userspace "lsgpio".
- It is now possible to name GPIO producer names, line names, from
the device tree. (Platform data has been supported for a while).
I bet we will get a similar mechanism for ACPI one of those days.
This makes is possible to get sensible producer names for e.g.
GPIO rails in "lsgpio" in userspace.
New drivers:
- New driver for the Loongson1.
- The XLP driver now supports Broadcom Vulcan ARM64.
- The IT87 driver now supports IT8620 and IT8628.
- The PCA953X driver now supports Galileo Gen2.
Driver improvements:
- MCP23S08 was switched to use the gpiolib irqchip helpers and now
also suppors level-triggered interrupts.
- 74x164 and RCAR now supports the .set_multiple() callback
- AMDPT was converted to use generic GPIO.
- TC3589x, TPS65218, SX150X, F7188X, MENZ127, VX855, WM831X, WM8994
support the new single ended callback for open drain and in some
cases open source.
- Implement the .get_direction() callback for a few more drivers like
PL061, Xgene.
Cleanups:
- Paul Gortmaker combed through the drivers and de-modularized those
who are not really modules.
- Move the GPIO poweroff DT bindings to the power subdir where they
belong.
- Rename gpio-generic.c to gpio-mmio.c, which is much more to the
point. That's what it is handling, nothing more, nothing less"
* tag 'gpio-v4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (126 commits)
MIPS: do away with ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB
gpio: zevio: make it explicitly non-modular
gpio: timberdale: make it explicitly non-modular
gpio: stmpe: make it explicitly non-modular
gpio: sodaville: make it explicitly non-modular
pinctrl: sh-pfc: Let gpio_chip.to_irq() return zero on error
gpio: dwapb: Add ACPI device ID for DWAPB GPIO controller on X-Gene platforms
gpio: dt-bindings: add wd,mbl-gpio bindings
gpio: of: make it possible to name GPIO lines
gpio: make gpiod_to_irq() return negative for NO_IRQ
gpio: xgene: implement .get_direction()
gpio: xgene: Enable ACPI support for X-Gene GFC GPIO driver
gpio: tegra: Implement gpio_get_direction callback
gpio: set up initial state from .get_direction()
gpio: rename gpio-generic.c into gpio-mmio.c
gpio: generic: fix GPIO_GENERIC_PLATFORM is set to module case
gpio: dwapb: add gpio-signaled acpi event support
gpio: dwapb: convert device node to fwnode
gpio: dwapb: remove name from dwapb_port_property
gpio/qoriq: select IRQ_DOMAIN
...
|
||
|
Linus Torvalds
|
fb6363e9f4 |
m68k updates for 4.7
- Preparatory work for Arnd's genrtc removal series. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJXOazVAAoJEEgEtLw/Ve779gAP/3g94gIw2dl4bJSUaostIzjK K4CK8iMD+fJ+d8HT4QJrX3e4bJS5GJK19t875URCRK2EHRK9gArLh5BHmzVo7wn+ BmKBoeW3L/4lpOsYqNcL8F/hfsste8gFH4eB/P2jy6CfuTBQiih1JhV1zgVVnvjz GXNPG5EKlfVPUaWByeUGhnSKJsn/32z9ZdIChWvuX82HJ+rU5AKf+YoFETzvB7tq 5WOhTvczomqZPaeb1hf6v5vG6qoDk2ykR/j9NHOLDjW3WovQiwsnyA3k6/a2XCdb E4aIGxXR3jCHVNdCLXCCN1LMEKP3TX3MyowUXijXWOuv3LJPQu/Ei5LAxSgpsuqE Ue1yO7gBNOLeEw37NQaWkTgq1D0jSawz151NW6jJMK4HhNDvF8b9Fhv8PXM0ljcF X0ZGal1zgWeuF0SjV/DctrxGw78r1Mz5Of7Yy5B8vHmDNZbuqR4fFnAKfaMPSLwV TVZEtfuSWWoaALA3Z6eieMVAH1dJqMqx1TP0GyVYLXWQ59FVSMmsu8QEPmjG+Gnr TKLuLRLj9Ggw5JH8Vbxl8eckBNkDFb0Ueo+799josWgdKIQn1xE5RrYunGGmaPa4 anSVv/tBkbNAM+oi0+keKmAXcxhiaddguib/FtxeVYJnVhPFZhm4CVmyzy4j01t+ uQzBLd7SGjZuqS4sUCAe =EDWM -----END PGP SIGNATURE----- Merge tag 'm68k-for-v4.7-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k updates from Geert Uytterhoeven: "Preparatory work for Arnd's genrtc removal series" * tag 'm68k-for-v4.7-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k/mvme16x: Include generic <linux/rtc.h> m68k/bvme6000: Include generic <linux/rtc.h> |
||
|
Geert Uytterhoeven
|
9a6462763b |
m68k/mvme16x: Include generic <linux/rtc.h>
The MVME16x RTC driver doesn't use any MC146818-specific definitions, hence include the generic <linux/rtc.h> instead of <linux/mc146818rtc.h>. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> |
||
|
Geert Uytterhoeven
|
8c66854b68 |
m68k/bvme6000: Include generic <linux/rtc.h>
The BVME6000 RTC driver doesn't use any MC146818-specific definitions, hence include the generic <linux/rtc.h> instead of <linux/mc146818rtc.h>. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> |
||
Linus Walleij
|
e05f2e1878 |
m68k: do away with ARCH_REQUIRE_GPIOLIB
Replace "select ARCH_REQUIRE_GPIOLIB" with "select GPIOLIB" as this can now be selected directly. Cc: Michael Büsch <m@bues.ch> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: linux-m68k@lists.linux-m68k.org Acked-by: Greg Ungerer <gerg@linux-m68k.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
||
|
Linus Torvalds
|
5b523ff281 |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu/coldfire fix from Greg Ungerer: "Only a single change that removes a local arch specific gpio bus sysfs device that now clashes with the generic gpio bus sysfs device interface" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68k/gpio: remove arch specific sysfs bus device |
||
Greg Ungerer
|
2763ee6448 |
m68k/gpio: remove arch specific sysfs bus device
The ColdFire architecture specific gpio support code registers a sysfs
bus device named "gpio". This clashes with the new generic API device
added in commit
|
||
|
Geert Uytterhoeven
|
7b8ba82ad4 |
m68k/defconfig: Update defconfigs for v4.6-rc2
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> |
||
|
Geert Uytterhoeven
|
0eb2c80c39 |
m68k: Wire up preadv2 and pwritev2
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> |
||
|
Linus Torvalds
|
11caf57f6a |
asm-generic changes for 4.6
There are only three patches this time, most other changes to files in include/asm-generic tend to go through the tree of whoever depends on the change. Two patches are cleanups for stuff that is no longer needed, the main change is to adapt the generic version of BUG_ON() for CONFIG_BUG=n to make it behave consistently with BUG(). This avoids undefined behavior along with a number of warnings about that undefined behavior in randconfig builds when we keep going on after hitting a BUG_ON(). -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIVAwUAVvRXDGCrR//JCVInAQKUFRAAmp23pohv08LZzXL8Qu7XfFN+b1RkZ936 WYBeiA9PEWufQs2hgXaEUXy0onO7ah4cs2NWfkaBPyxT+I9mN+ThdzqVrlTE+AEO 2K0f2RaZANC238zB86Yv/YvTj7FegH0DDdMBq/P06vlYdgBegx49U3pMpguxl3d0 /q9MyqTzo9j4uOEK4ix4/Dko+4eKIS5Y/xeb0TkeKA6HiBVzAhGLZFl+eMku07Bf ap8B705hBDXSBFeWcK9AvKjHZCM+FCkb+C3TXo9x5tUu8g5OIG1t962OQvT9ldsP rvo5ppRh/TAY2Z9chN3cKrsvshbHiZ9uRzeksCunL+SK+dOhEIPCVzLXndQpi3RD NgeNKgo6gKYdle44pEj0EH2ktuvr0u8sbjQg9SY2miC1H4DmEbCakSqtQegHXTKd chJ6xyNiQXktdfo0pFOtCA2gjqiAriugttBqUtGcK9zRqjGGpP5hOUQVm3jR7UMp Hjb+oj5o+Gjz5J1t5zsjbhFINDCHAgXRzqqaoT9RfE9+QlUftUhu+N9KVFgzhe9I 93VHaqgGIRoi856BO7UZSaMGhy7ljm1nQ18jP9aZl/tBco0kpd3AO8og9dJ0u2j+ 3fEqAHH30ia8GJCfIDnolxTL6uaqcCIeAoLgGcmn+QZS7ka+tD+000rtgd2pdy9/ gy/VPpFG064= =8tPL -----END PGP SIGNATURE----- Merge tag 'asm-generic-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic updates from Arnd Bergmann: "There are only three patches this time, most other changes to files in include/asm-generic tend to go through the tree of whoever depends on the change. Two patches are cleanups for stuff that is no longer needed, the main change is to adapt the generic version of BUG_ON() for CONFIG_BUG=n to make it behave consistently with BUG(). This avoids undefined behavior along with a number of warnings about that undefined behavior in randconfig builds when we keep going on after hitting a BUG_ON()" * tag 'asm-generic-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: asm-generic: remove old nonatomic-io wrapper files asm-generic: default BUG_ON(x) to if(x)BUG() asm-generic: page.h: Remove useless get_user_page and free_user_page |
||
|
Linus Torvalds
|
1200b6809d |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
"Highlights:
1) Support more Realtek wireless chips, from Jes Sorenson.
2) New BPF types for per-cpu hash and arrap maps, from Alexei
Starovoitov.
3) Make several TCP sysctls per-namespace, from Nikolay Borisov.
4) Allow the use of SO_REUSEPORT in order to do per-thread processing
of incoming TCP/UDP connections. The muxing can be done using a
BPF program which hashes the incoming packet. From Craig Gallek.
5) Add a multiplexer for TCP streams, to provide a messaged based
interface. BPF programs can be used to determine the message
boundaries. From Tom Herbert.
6) Add 802.1AE MACSEC support, from Sabrina Dubroca.
7) Avoid factorial complexity when taking down an inetdev interface
with lots of configured addresses. We were doing things like
traversing the entire address less for each address removed, and
flushing the entire netfilter conntrack table for every address as
well.
8) Add and use SKB bulk free infrastructure, from Jesper Brouer.
9) Allow offloading u32 classifiers to hardware, and implement for
ixgbe, from John Fastabend.
10) Allow configuring IRQ coalescing parameters on a per-queue basis,
from Kan Liang.
11) Extend ethtool so that larger link mode masks can be supported.
From David Decotigny.
12) Introduce devlink, which can be used to configure port link types
(ethernet vs Infiniband, etc.), port splitting, and switch device
level attributes as a whole. From Jiri Pirko.
13) Hardware offload support for flower classifiers, from Amir Vadai.
14) Add "Local Checksum Offload". Basically, for a tunneled packet
the checksum of the outer header is 'constant' (because with the
checksum field filled into the inner protocol header, the payload
of the outer frame checksums to 'zero'), and we can take advantage
of that in various ways. From Edward Cree"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1548 commits)
bonding: fix bond_get_stats()
net: bcmgenet: fix dma api length mismatch
net/mlx4_core: Fix backward compatibility on VFs
phy: mdio-thunder: Fix some Kconfig typos
lan78xx: add ndo_get_stats64
lan78xx: handle statistics counter rollover
RDS: TCP: Remove unused constant
RDS: TCP: Add sysctl tunables for sndbuf/rcvbuf on rds-tcp socket
net: smc911x: convert pxa dma to dmaengine
team: remove duplicate set of flag IFF_MULTICAST
bonding: remove duplicate set of flag IFF_MULTICAST
net: fix a comment typo
ethernet: micrel: fix some error codes
ip_tunnels, bpf: define IP_TUNNEL_OPTS_MAX and use it
bpf, dst: add and use dst_tclassid helper
bpf: make skb->tc_classid also readable
net: mvneta: bm: clarify dependencies
cls_bpf: reset class and reuse major in da
ldmvsw: Checkpatch sunvnet.c and sunvnet_common.c
ldmvsw: Add ldmvsw.c driver code
...
|
||
|
Linus Torvalds
|
1a46712aa9 |
This is the bulk of GPIO changes for kernel v4.6:
Core changes:
- The gpio_chip is now a *real device*. Until now the gpio chips
were just piggybacking the parent device or (gasp) floating in
space outside of the device model. We now finally make GPIO chips
devices. The gpio_chip will create a gpio_device which contains
a struct device, and this gpio_device struct is kept private.
Anything that needs to be kept private from the rest of the kernel
will gradually be moved over to the gpio_device.
- As a result of making the gpio_device a real device, we have added
resource management, so devm_gpiochip_add_data() will cut down on
overhead and reduce code lines. A huge slew of patches convert
almost all drivers in the subsystem to use this.
- Building on making the GPIO a real device, we add the first step
of a new userspace ABI: the GPIO character device. We take small
steps here, so we first add a pure *information* ABI and the tool
"lsgpio" that will list all GPIO devices on the system and all
lines on these devices. We can now discover GPIOs properly from
userspace. We still have not come up with a way to actually *use*
GPIOs from userspace.
- To encourage people to use the character device for the future,
we have it always-enabled when using GPIO. The old sysfs ABI is
still opt-in (and can be used in parallel), but is marked as
deprecated. We will keep it around for the foreseeable future,
but it will not be extended to cover ever more use cases.
Cleanup:
- Bjorn Helgaas removed a whole slew of per-architecture <asm/gpio.h>
includes. This dates back to when GPIO was an opt-in feature and
no shared library even existed: just a header file with proper
prototypes was provided and all semantics were up to the arch to
implement. These patches make the GPIO chip even more a proper
device and cleans out leftovers of the old in-kernel API here
and there. Still some cruft is left but it's very little now.
- There is still some clamping of return values for .get() going
on, but we now return sane values in the vast majority of drivers
and the errorpath is sanitized. Some patches for powerpc, blackfin
and unicore still drop in.
- We continue to switch the ARM, MIPS, blackfin, m68k local GPIO
implementations to use gpiochip_add_data() and cut down on code
lines.
- MPC8xxx is converted to use the generic GPIO helpers.
- ATH79 is converted to use the generic GPIO helpers.
New drivers:
- WinSystems WS16C48
- Acces 104-DIO-48E
- F81866 (a F7188x variant)
- Qoric (a MPC8xxx variant)
- TS-4800
- SPI serializers (pisosr): simple 74xx shift registers connected
to SPI to obtain a dirt-cheap output-only GPIO expander.
- Texas Instruments TPIC2810
- Texas Instruments TPS65218
- Texas Instruments TPS65912
- X-Gene (ARM64) standby GPIO controller
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=9AJ4
-----END PGP SIGNATURE-----
Merge tag 'gpio-v4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO updates from Linus Walleij:
"This is the bulk of GPIO changes for kernel v4.6. There is quite a
lot of interesting stuff going on.
The patches to other subsystems and arch-wide are ACKed as far as
possible, though I consider things like per-arch <asm/gpio.h> as
essentially a part of the GPIO subsystem so it should not be needed.
Core changes:
- The gpio_chip is now a *real device*. Until now the gpio chips
were just piggybacking the parent device or (gasp) floating in
space outside of the device model.
We now finally make GPIO chips devices. The gpio_chip will create
a gpio_device which contains a struct device, and this gpio_device
struct is kept private. Anything that needs to be kept private
from the rest of the kernel will gradually be moved over to the
gpio_device.
- As a result of making the gpio_device a real device, we have added
resource management, so devm_gpiochip_add_data() will cut down on
overhead and reduce code lines. A huge slew of patches convert
almost all drivers in the subsystem to use this.
- Building on making the GPIO a real device, we add the first step of
a new userspace ABI: the GPIO character device. We take small
steps here, so we first add a pure *information* ABI and the tool
"lsgpio" that will list all GPIO devices on the system and all
lines on these devices.
We can now discover GPIOs properly from userspace. We still have
not come up with a way to actually *use* GPIOs from userspace.
- To encourage people to use the character device for the future, we
have it always-enabled when using GPIO. The old sysfs ABI is still
opt-in (and can be used in parallel), but is marked as deprecated.
We will keep it around for the foreseeable future, but it will not
be extended to cover ever more use cases.
Cleanup:
- Bjorn Helgaas removed a whole slew of per-architecture <asm/gpio.h>
includes.
This dates back to when GPIO was an opt-in feature and no shared
library even existed: just a header file with proper prototypes was
provided and all semantics were up to the arch to implement. These
patches make the GPIO chip even more a proper device and cleans out
leftovers of the old in-kernel API here and there.
Still some cruft is left but it's very little now.
- There is still some clamping of return values for .get() going on,
but we now return sane values in the vast majority of drivers and
the errorpath is sanitized. Some patches for powerpc, blackfin and
unicore still drop in.
- We continue to switch the ARM, MIPS, blackfin, m68k local GPIO
implementations to use gpiochip_add_data() and cut down on code
lines.
- MPC8xxx is converted to use the generic GPIO helpers.
- ATH79 is converted to use the generic GPIO helpers.
New drivers:
- WinSystems WS16C48
- Acces 104-DIO-48E
- F81866 (a F7188x variant)
- Qoric (a MPC8xxx variant)
- TS-4800
- SPI serializers (pisosr): simple 74xx shift registers connected to
SPI to obtain a dirt-cheap output-only GPIO expander.
- Texas Instruments TPIC2810
- Texas Instruments TPS65218
- Texas Instruments TPS65912
- X-Gene (ARM64) standby GPIO controller"
* tag 'gpio-v4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (194 commits)
Revert "Share upstreaming patches"
gpio: mcp23s08: Fix clearing of interrupt.
gpiolib: Fix comment referring to gpio_*() in gpiod_*()
gpio: pca953x: Fix pca953x_gpio_set_multiple() on 64-bit
gpio: xgene: Fix kconfig for standby GIPO contoller
gpio: Add generic serializer DT binding
gpio: uapi: use 0xB4 as ioctl() major
gpio: tps65912: fix bad merge
Revert "gpio: lp3943: Drop pin_used and lp3943_gpio_request/lp3943_gpio_free"
gpio: omap: drop dev field from gpio_bank structure
gpio: mpc8xxx: Slightly update the code for better readability
gpio: mpc8xxx: Remove *read_reg and *write_reg from struct mpc8xxx_gpio_chip
gpio: mpc8xxx: Fixup setting gpio direction output
gpio: mcp23s08: Add support for mcp23s18
dt-bindings: gpio: altera: Fix altr,interrupt-type property
gpio: add driver for MEN 16Z127 GPIO controller
gpio: lp3943: Drop pin_used and lp3943_gpio_request/lp3943_gpio_free
gpio: timberdale: Switch to devm_ioremap_resource()
gpio: ts4800: Add IMX51 dependency
gpiolib: rewrite gpiodev_add_to_list
...
|
||
|
Linus Torvalds
|
82b666eee7 |
Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu updates from Greg Ungerer: "The main change is the removal of the bit-rotten 68360 support. Also a fix to always make the ethernet FEC platform info available" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68knommu: remove obsolete 68360 support m68knommu: fix FEC platform device registration when driver is modular |
||
|
Linus Torvalds
|
96b9b1c956 |
TTY/Serial patches for 4.6-rc1
Here's the big tty/serial driver pull request for 4.6-rc1. Lots of changes in here, Peter has been on a tear again, with lots of refactoring and bugs fixes, many thanks to the great work he has been doing. Lots of driver updates and fixes as well, full details in the shortlog. All have been in linux-next for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEABECAAYFAlbp8z8ACgkQMUfUDdst+ym1vwCgnOOCORaZyeQ4QrcxPAK5pHFn VrMAoNHvDgNYtG+Hmzv25Lgp3HnysPin =MLRG -----END PGP SIGNATURE----- Merge tag 'tty-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial updates from Greg KH: "Here's the big tty/serial driver pull request for 4.6-rc1. Lots of changes in here, Peter has been on a tear again, with lots of refactoring and bugs fixes, many thanks to the great work he has been doing. Lots of driver updates and fixes as well, full details in the shortlog. All have been in linux-next for a while with no reported issues" * tag 'tty-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (220 commits) serial: 8250: describe CONFIG_SERIAL_8250_RSA serial: samsung: optimize UART rx fifo access routine serial: pl011: add mark/space parity support serial: sa1100: make sa1100_register_uart_fns a function tty: serial: 8250: add MOXA Smartio MUE boards support serial: 8250: convert drivers to use up_to_u8250p() serial: 8250/mediatek: fix building with SERIAL_8250=m serial: 8250/ingenic: fix building with SERIAL_8250=m serial: 8250/uniphier: fix modular build Revert "drivers/tty/serial: make 8250/8250_ingenic.c explicitly non-modular" Revert "drivers/tty/serial: make 8250/8250_mtk.c explicitly non-modular" serial: mvebu-uart: initial support for Armada-3700 serial port serial: mctrl_gpio: Add missing module license serial: ifx6x60: avoid uninitialized variable use tty/serial: at91: fix bad offset for UART timeout register tty/serial: at91: restore dynamic driver binding serial: 8250: Add hardware dependency to RT288X option TTY, devpts: document pty count limiting tty: goldfish: support platform_device with id -1 drivers: tty: goldfish: Add device tree bindings ... |
||
|
Linus Torvalds
|
63e30271b0 |
PCI changes for the v4.6 merge window:
Enumeration
Disable IO/MEM decoding for devices with non-compliant BARs (Bjorn Helgaas)
Mark Broadwell-EP Home Agent & PCU as having non-compliant BARs (Bjorn Helgaas
Resource management
Mark shadow copy of VGA ROM as IORESOURCE_PCI_FIXED (Bjorn Helgaas)
Don't assign or reassign immutable resources (Bjorn Helgaas)
Don't enable/disable ROM BAR if we're using a RAM shadow copy (Bjorn Helgaas)
Set ROM shadow location in arch code, not in PCI core (Bjorn Helgaas)
Remove arch-specific IORESOURCE_ROM_SHADOW size from sysfs (Bjorn Helgaas)
ia64: Use ioremap() instead of open-coded equivalent (Bjorn Helgaas)
ia64: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas)
MIPS: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas)
Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY (Bjorn Helgaas)
Don't leak memory if sysfs_create_bin_file() fails (Bjorn Helgaas)
rcar: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi)
designware: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi)
Virtualization
Wait for up to 1000ms after FLR reset (Alex Williamson)
Support SR-IOV on any function type (Kelly Zytaruk)
Add ACS quirk for all Cavium devices (Manish Jaggi)
AER
Rename pci_ops_aer to aer_inj_pci_ops (Bjorn Helgaas)
Restore pci_ops pointer while calling original pci_ops (David Daney)
Fix aer_inject error codes (Jean Delvare)
Use dev_warn() in aer_inject (Jean Delvare)
Log actual error causes in aer_inject (Jean Delvare)
Log aer_inject error injections (Jean Delvare)
VPD
Prevent VPD access for buggy devices (Babu Moger)
Move pci_read_vpd() and pci_write_vpd() close to other VPD code (Bjorn Helgaas)
Move pci_vpd_release() from header file to pci/access.c (Bjorn Helgaas)
Remove struct pci_vpd_ops.release function pointer (Bjorn Helgaas)
Rename VPD symbols to remove unnecessary "pci22" (Bjorn Helgaas)
Fold struct pci_vpd_pci22 into struct pci_vpd (Bjorn Helgaas)
Sleep rather than busy-wait for VPD access completion (Bjorn Helgaas)
Update VPD definitions (Hannes Reinecke)
Allow access to VPD attributes with size 0 (Hannes Reinecke)
Determine actual VPD size on first access (Hannes Reinecke)
Generic host bridge driver
Move structure definitions to separate header file (David Daney)
Add pci_host_common_probe(), based on gen_pci_probe() (David Daney)
Expose pci_host_common_probe() for use by other drivers (David Daney)
Altera host bridge driver
Fix altera_pcie_link_is_up() (Ley Foon Tan)
Cavium ThunderX host bridge driver
Add PCIe host driver for ThunderX processors (David Daney)
Add driver for ThunderX-pass{1,2} on-chip devices (David Daney)
Freescale i.MX6 host bridge driver
Add DT bindings to configure PHY Tx driver settings (Justin Waters)
Move imx6_pcie_reset_phy() near other PHY handling functions (Lucas Stach)
Move PHY reset into imx6_pcie_establish_link() (Lucas Stach)
Remove broken Gen2 workaround (Lucas Stach)
Move link up check into imx6_pcie_wait_for_link() (Lucas Stach)
Freescale Layerscape host bridge driver
Add "fsl,ls2085a-pcie" compatible ID (Yang Shi)
Intel VMD host bridge driver
Attach VMD resources to parent domain's resource tree (Jon Derrick)
Set bus resource start to 0 (Keith Busch)
Microsoft Hyper-V host bridge driver
Add fwnode_handle to x86 pci_sysdata (Jake Oshins)
Look up IRQ domain by fwnode_handle (Jake Oshins)
Add paravirtual PCI front-end for Microsoft Hyper-V VMs (Jake Oshins)
NVIDIA Tegra host bridge driver
Add pci_ops.{add,remove}_bus() callbacks (Thierry Reding)
Implement ->{add,remove}_bus() callbacks (Thierry Reding)
Remove unused struct tegra_pcie.num_ports field (Thierry Reding)
Track bus -> CPU mapping (Thierry Reding)
Remove misleading PHYS_OFFSET (Thierry Reding)
Renesas R-Car host bridge driver
Depend on ARCH_RENESAS, not ARCH_SHMOBILE (Simon Horman)
Synopsys DesignWare host bridge driver
ARC: Add PCI support (Joao Pinto)
Add generic dw_pcie_wait_for_link() (Joao Pinto)
Add default link up check if sub-driver doesn't override (Joao Pinto)
Add driver for prototyping kits based on ARC SDP (Joao Pinto)
TI Keystone host bridge driver
Defer probing if devm_phy_get() returns -EPROBE_DEFER (Shawn Lin)
Xilinx AXI host bridge driver
Use of_pci_get_host_bridge_resources() to parse DT (Bharat Kumar Gogada)
Remove dependency on ARM-specific struct hw_pci (Bharat Kumar Gogada)
Don't call pci_fixup_irqs() on Microblaze (Bharat Kumar Gogada)
Update Zynq binding with Microblaze node (Bharat Kumar Gogada)
microblaze: Support generic Xilinx AXI PCIe Host Bridge IP driver (Bharat Kumar Gogada)
Xilinx NWL host bridge driver
Add support for Xilinx NWL PCIe Host Controller (Bharat Kumar Gogada)
Miscellaneous
Check device_attach() return value always (Bjorn Helgaas)
Move pci_set_flags() from asm-generic/pci-bridge.h to linux/pci.h (Bjorn Helgaas)
Remove includes of empty asm-generic/pci-bridge.h (Bjorn Helgaas)
ARM64: Remove generated include of asm-generic/pci-bridge.h (Bjorn Helgaas)
Remove empty asm-generic/pci-bridge.h (Bjorn Helgaas)
Remove includes of asm/pci-bridge.h (Bjorn Helgaas)
Consolidate PCI DMA constants and interfaces in linux/pci-dma-compat.h (Bjorn Helgaas)
unicore32: Remove unused HAVE_ARCH_PCI_SET_DMA_MASK definition (Bjorn Helgaas)
Cleanup pci/pcie/Kconfig whitespace (Andreas Ziegler)
Include pci/hotplug Kconfig directly from pci/Kconfig (Bjorn Helgaas)
Include pci/pcie/Kconfig directly from pci/Kconfig (Bogicevic Sasa)
frv: Remove stray pci_{alloc,free}_consistent() declaration (Christoph Hellwig)
Move pci_dma_* helpers to common code (Christoph Hellwig)
Add PCI_CLASS_SERIAL_USB_DEVICE definition (Heikki Krogerus)
Add QEMU top-level IDs for (sub)vendor & device (Robin H. Johnson)
Fix broken URL for Dell biosdevname (Naga Venkata Sai Indubhaskar Jupudi)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=otsF
-----END PGP SIGNATURE-----
Merge tag 'pci-v4.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"PCI changes for v4.6:
Enumeration:
- Disable IO/MEM decoding for devices with non-compliant BARs (Bjorn Helgaas)
- Mark Broadwell-EP Home Agent & PCU as having non-compliant BARs (Bjorn Helgaas
Resource management:
- Mark shadow copy of VGA ROM as IORESOURCE_PCI_FIXED (Bjorn Helgaas)
- Don't assign or reassign immutable resources (Bjorn Helgaas)
- Don't enable/disable ROM BAR if we're using a RAM shadow copy (Bjorn Helgaas)
- Set ROM shadow location in arch code, not in PCI core (Bjorn Helgaas)
- Remove arch-specific IORESOURCE_ROM_SHADOW size from sysfs (Bjorn Helgaas)
- ia64: Use ioremap() instead of open-coded equivalent (Bjorn Helgaas)
- ia64: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas)
- MIPS: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas)
- Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY (Bjorn Helgaas)
- Don't leak memory if sysfs_create_bin_file() fails (Bjorn Helgaas)
- rcar: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi)
- designware: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi)
Virtualization:
- Wait for up to 1000ms after FLR reset (Alex Williamson)
- Support SR-IOV on any function type (Kelly Zytaruk)
- Add ACS quirk for all Cavium devices (Manish Jaggi)
AER:
- Rename pci_ops_aer to aer_inj_pci_ops (Bjorn Helgaas)
- Restore pci_ops pointer while calling original pci_ops (David Daney)
- Fix aer_inject error codes (Jean Delvare)
- Use dev_warn() in aer_inject (Jean Delvare)
- Log actual error causes in aer_inject (Jean Delvare)
- Log aer_inject error injections (Jean Delvare)
VPD:
- Prevent VPD access for buggy devices (Babu Moger)
- Move pci_read_vpd() and pci_write_vpd() close to other VPD code (Bjorn Helgaas)
- Move pci_vpd_release() from header file to pci/access.c (Bjorn Helgaas)
- Remove struct pci_vpd_ops.release function pointer (Bjorn Helgaas)
- Rename VPD symbols to remove unnecessary "pci22" (Bjorn Helgaas)
- Fold struct pci_vpd_pci22 into struct pci_vpd (Bjorn Helgaas)
- Sleep rather than busy-wait for VPD access completion (Bjorn Helgaas)
- Update VPD definitions (Hannes Reinecke)
- Allow access to VPD attributes with size 0 (Hannes Reinecke)
- Determine actual VPD size on first access (Hannes Reinecke)
Generic host bridge driver:
- Move structure definitions to separate header file (David Daney)
- Add pci_host_common_probe(), based on gen_pci_probe() (David Daney)
- Expose pci_host_common_probe() for use by other drivers (David Daney)
Altera host bridge driver:
- Fix altera_pcie_link_is_up() (Ley Foon Tan)
Cavium ThunderX host bridge driver:
- Add PCIe host driver for ThunderX processors (David Daney)
- Add driver for ThunderX-pass{1,2} on-chip devices (David Daney)
Freescale i.MX6 host bridge driver:
- Add DT bindings to configure PHY Tx driver settings (Justin Waters)
- Move imx6_pcie_reset_phy() near other PHY handling functions (Lucas Stach)
- Move PHY reset into imx6_pcie_establish_link() (Lucas Stach)
- Remove broken Gen2 workaround (Lucas Stach)
- Move link up check into imx6_pcie_wait_for_link() (Lucas Stach)
Freescale Layerscape host bridge driver:
- Add "fsl,ls2085a-pcie" compatible ID (Yang Shi)
Intel VMD host bridge driver:
- Attach VMD resources to parent domain's resource tree (Jon Derrick)
- Set bus resource start to 0 (Keith Busch)
Microsoft Hyper-V host bridge driver:
- Add fwnode_handle to x86 pci_sysdata (Jake Oshins)
- Look up IRQ domain by fwnode_handle (Jake Oshins)
- Add paravirtual PCI front-end for Microsoft Hyper-V VMs (Jake Oshins)
NVIDIA Tegra host bridge driver:
- Add pci_ops.{add,remove}_bus() callbacks (Thierry Reding)
- Implement ->{add,remove}_bus() callbacks (Thierry Reding)
- Remove unused struct tegra_pcie.num_ports field (Thierry Reding)
- Track bus -> CPU mapping (Thierry Reding)
- Remove misleading PHYS_OFFSET (Thierry Reding)
Renesas R-Car host bridge driver:
- Depend on ARCH_RENESAS, not ARCH_SHMOBILE (Simon Horman)
Synopsys DesignWare host bridge driver:
- ARC: Add PCI support (Joao Pinto)
- Add generic dw_pcie_wait_for_link() (Joao Pinto)
- Add default link up check if sub-driver doesn't override (Joao Pinto)
- Add driver for prototyping kits based on ARC SDP (Joao Pinto)
TI Keystone host bridge driver:
- Defer probing if devm_phy_get() returns -EPROBE_DEFER (Shawn Lin)
Xilinx AXI host bridge driver:
- Use of_pci_get_host_bridge_resources() to parse DT (Bharat Kumar Gogada)
- Remove dependency on ARM-specific struct hw_pci (Bharat Kumar Gogada)
- Don't call pci_fixup_irqs() on Microblaze (Bharat Kumar Gogada)
- Update Zynq binding with Microblaze node (Bharat Kumar Gogada)
- microblaze: Support generic Xilinx AXI PCIe Host Bridge IP driver (Bharat Kumar Gogada)
Xilinx NWL host bridge driver:
- Add support for Xilinx NWL PCIe Host Controller (Bharat Kumar Gogada)
Miscellaneous:
- Check device_attach() return value always (Bjorn Helgaas)
- Move pci_set_flags() from asm-generic/pci-bridge.h to linux/pci.h (Bjorn Helgaas)
- Remove includes of empty asm-generic/pci-bridge.h (Bjorn Helgaas)
- ARM64: Remove generated include of asm-generic/pci-bridge.h (Bjorn Helgaas)
- Remove empty asm-generic/pci-bridge.h (Bjorn Helgaas)
- Remove includes of asm/pci-bridge.h (Bjorn Helgaas)
- Consolidate PCI DMA constants and interfaces in linux/pci-dma-compat.h (Bjorn Helgaas)
- unicore32: Remove unused HAVE_ARCH_PCI_SET_DMA_MASK definition (Bjorn Helgaas)
- Cleanup pci/pcie/Kconfig whitespace (Andreas Ziegler)
- Include pci/hotplug Kconfig directly from pci/Kconfig (Bjorn Helgaas)
- Include pci/pcie/Kconfig directly from pci/Kconfig (Bogicevic Sasa)
- frv: Remove stray pci_{alloc,free}_consistent() declaration (Christoph Hellwig)
- Move pci_dma_* helpers to common code (Christoph Hellwig)
- Add PCI_CLASS_SERIAL_USB_DEVICE definition (Heikki Krogerus)
- Add QEMU top-level IDs for (sub)vendor & device (Robin H. Johnson)
- Fix broken URL for Dell biosdevname (Naga Venkata Sai Indubhaskar Jupudi)"
* tag 'pci-v4.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (94 commits)
PCI: Add PCI_CLASS_SERIAL_USB_DEVICE definition
PCI: designware: Add driver for prototyping kits based on ARC SDP
PCI: designware: Add default link up check if sub-driver doesn't override
PCI: designware: Add generic dw_pcie_wait_for_link()
PCI: Cleanup pci/pcie/Kconfig whitespace
PCI: Simplify pci_create_attr() control flow
PCI: Don't leak memory if sysfs_create_bin_file() fails
PCI: Simplify sysfs ROM cleanup
PCI: Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY
MIPS: Loongson 3: Keep CPU physical (not virtual) addresses in shadow ROM resource
MIPS: Loongson 3: Use temporary struct resource * to avoid repetition
ia64/PCI: Keep CPU physical (not virtual) addresses in shadow ROM resource
ia64/PCI: Use ioremap() instead of open-coded equivalent
ia64/PCI: Use temporary struct resource * to avoid repetition
PCI: Clean up pci_map_rom() whitespace
PCI: Remove arch-specific IORESOURCE_ROM_SHADOW size from sysfs
PCI: thunder: Add driver for ThunderX-pass{1,2} on-chip devices
PCI: thunder: Add PCIe host driver for ThunderX processors
PCI: generic: Expose pci_host_common_probe() for use by other drivers
PCI: generic: Add pci_host_common_probe(), based on gen_pci_probe()
...
|
||
|
Linus Torvalds
|
aa6865d836 |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Fix misspellings in comments. m68k: Use conventional function parameters for do_sigreturn zorro: Use kobj_to_dev() |
||
Alexander Duyck
|
1e94082963 |
ipv6: Pass proto to csum_ipv6_magic as __u8 instead of unsigned short
This patch updates csum_ipv6_magic so that it correctly recognizes that protocol is a unsigned 8 bit value. This will allow us to better understand what limitations may or may not be present in how we handle the data. For example there are a number of places that call htonl on the protocol value. This is likely not necessary and can be replaced with a multiplication by ntohl(1) which will be converted to a shift by the compiler. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Christoph Hellwig
|
bc4b024a8b |
PCI: Move pci_dma_* helpers to common code
For a long time all architectures implement the pci_dma_* functions using the generic DMA API, and they all use the same header to do so. Move this header, pci-dma-compat.h, to include/linux and include it from the generic pci.h instead of having each arch duplicate this include. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
|
Greg Ungerer
|
a3595962d8 |
m68knommu: remove obsolete 68360 support
Remove the obsolete Motorola/Freescale 68360 SoC support. It has been bit rotting for many years with little active use in mainlne. There has been no serial driver support for many years, so it is largely not useful in its current state. Signed-off-by: Greg Ungerer <gerg@uclinux.org> |
||
|
Greg Ungerer
|
ca6fafd183 |
m68knommu: fix FEC platform device registration when driver is modular
The FEC (Fast Ethernet Crontroller) module on many ColdFire parts can be compiled into the kernel, or as a module. Therefore the platform device support for it is required whenever the driver is enabled - not just when built into the kernel. Use IS_ENABLED(CONFIG_FEC) instead of a conditional check on only the driver being built into the kernel. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> |
||
Adam Buchbinder
|
efbec135f1 |
m68k: Fix misspellings in comments.
Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com> Acked-by: Greg Ungerer <gerg@uclinux.org> [nommu, coldfire] Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> |
||
|
Greg Ungerer
|
a95517992a |
m68k: Use conventional function parameters for do_sigreturn
Create conventional stack parameters for the calls to do_sigreturn and do_rt_sigreturn. The current C code for do_sigreturn and do_rt_sigreturn dig into the stack to create local pointers to the saved switch stack and the pt_regs structs. The motivation for this change is a problem with non-MMU targets that have broken signal return paths on newer versions of gcc. It appears as though gcc has determined that the pointers into the saved stack structs, and the saved structs themselves, are function parameters and updates to them will be lost on function return, so they are optimized away. This results in large parts of restore_sigcontext() and mangle_kernel_stack() functions being removed. Of course this results in non-functional code causing kernel oops. This problem has been observed with gcc version 5.2 and 5.3, and probably exists in earlier versions as well. Using conventional stack parameter pointers passed to these functions has the advantage of the code here not needing to know the exact details of how the underlying entry handler layed these structs out on the stack. So the rather ugly pointer setup casting and arg referencing can be removed. The resulting code after this change is a few bytes larger (due to the overhead of creating the stack args and their tear down). Not being hot paths I don't think this is too much of a problem here. An alternative solution is to put a barrier() in the do_sigreturn() code, but this doesn't feel quite as clean as this solution. This change has been compile tested on all defconfigs, and run tested on Atari (through aranym), ColdFire with MMU (M5407EVB) and ColdFire with no-MMU (QEMU and M5208EVB). Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> |
||
Chen Gang
|
4e0b6ca9da |
asm-generic: page.h: Remove useless get_user_page and free_user_page
They are not symmetric with each other, neither are used in real world (can not be found by grep command in source code root directory), so remove them. Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Linus Walleij
|
ebdbcba0d5 |
m68k: gpio: switch to gpiochip_add_data()
We're planning to remove the gpiochip_add() function to swith to gpiochip_add_data() with NULL for data argument. Cc: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
||
|
Geert Uytterhoeven
|
daf670bc9d |
m68k/defconfig: Update defconfigs for v4.5-rc1
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> |
||
|
Geert Uytterhoeven
|
78832a88e6 |
m68k: Wire up copy_file_range
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Greg Ungerer <gerg@uclinux.org> |