If BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET is set in incompat feature
set, it means the cache device is created with obsoleted layout with
obso_bucket_site_hi. Now bcache does not support this feature bit, a new
BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE incompat feature bit is added
for a better layout to support large bucket size.
For the legacy compatibility purpose, if a cache device created with
obsoleted BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET feature bit, all bcache
devices attached to this cache set should be set to read-only. Then the
dirty data can be written back to backing device before re-create the
cache device with BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE feature bit
by the latest bcache-tools.
This patch checks BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET feature bit
when running a cache set and attach a bcache device to the cache set. If
this bit is set,
- When run a cache set, print an error kernel message to indicate all
following attached bcache device will be read-only.
- When attach a bcache device, print an error kernel message to indicate
the attached bcache device will be read-only, and ask users to update
to latest bcache-tools.
Such change is only for cache device whose bucket size >= 32MB, this is
for the zoned SSD and almost nobody uses such large bucket size at this
moment. If you don't explicit set a large bucket size for a zoned SSD,
such change is totally transparent to your bcache device.
Fixes: ffa4703275 ("bcache: add bucket_size_hi into struct cache_sb_disk for large bucket")
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When large bucket feature was added, BCH_FEATURE_INCOMPAT_LARGE_BUCKET
was introduced into the incompat feature set. It used bucket_size_hi
(which was added at the tail of struct cache_sb_disk) to extend current
16bit bucket size to 32bit with existing bucket_size in struct
cache_sb_disk.
This is not a good idea, there are two obvious problems,
- Bucket size is always value power of 2, if store log2(bucket size) in
existing bucket_size of struct cache_sb_disk, it is unnecessary to add
bucket_size_hi.
- Macro csum_set() assumes d[SB_JOURNAL_BUCKETS] is the last member in
struct cache_sb_disk, bucket_size_hi was added after d[] which makes
csum_set calculate an unexpected super block checksum.
To fix the above problems, this patch introduces a new incompat feature
bit BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE, when this bit is set, it
means bucket_size in struct cache_sb_disk stores the order of power-of-2
bucket size value. When user specifies a bucket size larger than 32768
sectors, BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE will be set to
incompat feature set, and bucket_size stores log2(bucket size) more
than store the real bucket size value.
The obsoleted BCH_FEATURE_INCOMPAT_LARGE_BUCKET won't be used anymore,
it is renamed to BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET and still only
recognized by kernel driver for legacy compatible purpose. The previous
bucket_size_hi is renmaed to obso_bucket_size_hi in struct cache_sb_disk
and not used in bcache-tools anymore.
For cache device created with BCH_FEATURE_INCOMPAT_LARGE_BUCKET feature,
bcache-tools and kernel driver still recognize the feature string and
display it as "obso_large_bucket".
With this change, the unnecessary extra space extend of bcache on-disk
super block can be avoided, and csum_set() may generate expected check
sum as well.
Fixes: ffa4703275 ("bcache: add bucket_size_hi into struct cache_sb_disk for large bucket")
Signed-off-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org # 5.9+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch adds the check for features which is incompatible for
current supported feature sets.
Now if the bcache device created by bcache-tools has features that
current kernel doesn't support, read_super() will fail with error
messoage. E.g. if an unsupported incompatible feature detected,
bcache register will fail with dmesg "bcache: register_bcache() error :
Unsupported incompatible feature found".
Fixes: d721a43ff6 ("bcache: increase super block version for cache device and backing device")
Fixes: ffa4703275 ("bcache: add bucket_size_hi into struct cache_sb_disk for large bucket")
Signed-off-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org # 5.9+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch fixes the following typos,
from BCH_FEATURE_COMPAT_SUUP to BCH_FEATURE_COMPAT_SUPP
from BCH_FEATURE_INCOMPAT_SUUP to BCH_FEATURE_INCOMPAT_SUPP
from BCH_FEATURE_INCOMPAT_SUUP to BCH_FEATURE_RO_COMPAT_SUPP
Fixes: d721a43ff6 ("bcache: increase super block version for cache device and backing device")
Fixes: ffa4703275 ("bcache: add bucket_size_hi into struct cache_sb_disk for large bucket")
Signed-off-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org # 5.9+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is no need to reassign pdev_set_uuid in the second loop iteration,
so move it to the place before second loop.
Signed-off-by: Yi Li <yili@winhong.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace a comma between expression statements by a semicolon.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: Coly Li <colyli@sue.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There have no reassign the bdev after check It is IS_ERR.
the double check !IS_ERR(bdev) is superfluous.
After commit 4e7b5671c6 ("block: remove i_bdev"),
"Switch the block device lookup interfaces to directly work with a dev_t
so that struct block_device references are only acquired by the
blkdev_get variants (and the blk-cgroup special case). This means that
we now don't need an extra reference in the inode and can generally
simplify handling of struct block_device to keep the lookups contained
in the core block layer code."
so after lookup_bdev call, there no need to do bdput.
remove a superfluous check the bdev & don't call bdput after lookup_bdev.
Fixes: 4e7b5671c6a8("block: remove i_bdev")
Signed-off-by: Yi Li <yili@winhong.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=ayp2
-----END PGP SIGNATURE-----
Merge tag 'for-5.11/drivers-2020-12-14' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
"Nothing major in here:
- NVMe pull request from Christoph:
- nvmet passthrough improvements (Chaitanya Kulkarni)
- fcloop error injection support (James Smart)
- read-only support for zoned namespaces without Zone Append
(Javier González)
- improve some error message (Minwoo Im)
- reject I/O to offline fabrics namespaces (Victor Gladkov)
- PCI queue allocation cleanups (Niklas Schnelle)
- remove an unused allocation in nvmet (Amit Engel)
- a Kconfig spelling fix (Colin Ian King)
- nvme_req_qid simplication (Baolin Wang)
- MD pull request from Song:
- Fix race condition in md_ioctl() (Dae R. Jeong)
- Initialize read_slot properly for raid10 (Kevin Vigor)
- Code cleanup (Pankaj Gupta)
- md-cluster resync/reshape fix (Zhao Heming)
- Move null_blk into its own directory (Damien Le Moal)
- null_blk zone and discard improvements (Damien Le Moal)
- bcache race fix (Dongsheng Yang)
- Set of rnbd fixes/improvements (Gioh Kim, Guoqing Jiang, Jack Wang,
Lutz Pogrell, Md Haris Iqbal)
- lightnvm NULL pointer deref fix (tangzhenhao)
- sr in_interrupt() removal (Sebastian Andrzej Siewior)
- FC endpoint security support for s390/dasd (Jan Höppner, Sebastian
Ott, Vineeth Vijayan). From the s390 arch guys, arch bits included
as it made it easier for them to funnel the feature through the
block driver tree.
- Follow up fixes (Colin Ian King)"
* tag 'for-5.11/drivers-2020-12-14' of git://git.kernel.dk/linux-block: (64 commits)
block: drop dead assignments in loop_init()
sr: Remove in_interrupt() usage in sr_init_command().
sr: Switch the sector size back to 2048 if sr_read_sector() changed it.
cdrom: Reset sector_size back it is not 2048.
drivers/lightnvm: fix a null-ptr-deref bug in pblk-core.c
null_blk: Move driver into its own directory
null_blk: Allow controlling max_hw_sectors limit
null_blk: discard zones on reset
null_blk: cleanup discard handling
null_blk: Improve implicit zone close
null_blk: improve zone locking
block: Align max_hw_sectors to logical blocksize
null_blk: Fail zone append to conventional zones
null_blk: Fix zone size initialization
bcache: fix race between setting bdev state to none and new write request direct to backing
block/rnbd: fix a null pointer dereference on dev->blk_symlink_name
block/rnbd-clt: Dynamically alloc buffer for pathname & blk_symlink_name
block/rnbd: call kobject_put in the failure path
Documentation/ABI/rnbd-srv: add document for force_close
block/rnbd-srv: close a mapped device from server side.
...
There is a race condition in detaching as below:
A. detaching B. Write request
(1) writing back
(2) write back done, set bdev
state to clean.
(3) cached_dev_put() and
schedule_work(&dc->detach);
(4) write data [0 - 4K] directly
into backing and ack to user.
(5) power-failure...
When we restart this bcache device, this bdev is clean but not detached,
and read [0 - 4K], we will get unexpected old data from cache device.
To fix this problem, set the bdev state to none when we writeback done
in detaching, and then if power-failure happened as above, the data in
cache will not be used in next bcache device starting, it's detached, we
will read the correct data from backing derectly.
Signed-off-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use struct block_device to lookup partitions on a disk. This removes
all usage of struct hd_struct from the I/O path.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Coly Li <colyli@suse.de> [bcache]
Acked-by: Chao Yu <yuchao0@huawei.com> [f2fs]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that the hd_struct always has a block device attached to it, there is
no need for having two size field that just get out of sync.
Additionally the field in hd_struct did not use proper serialization,
possibly allowing for torn writes. By only using the block_device field
this problem also gets fixed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Coly Li <colyli@suse.de> [bcache]
Acked-by: Chao Yu <yuchao0@huawei.com> [f2fs]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Switch the block device lookup interfaces to directly work with a dev_t
so that struct block_device references are only acquired by the
blkdev_get variants (and the blk-cgroup special case). This means that
we now don't need an extra reference in the inode and can generally
simplify handling of struct block_device to keep the lookups contained
in the core block layer code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Coly Li <colyli@suse.de> [bcache]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a little helper to find the kobject for a struct block_device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Coly Li <colyli@suse.de> [bcache]
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since bcache code was merged into mainline kerrnel, each cache set only
as one single cache in it. The multiple caches framework is here but the
code is far from completed. Considering the multiple copies of cached
data can also be stored on e.g. md raid1 devices, it is unnecessary to
support multiple caches in one cache set indeed.
The previous preparation patches fix the dependencies of explicitly
making a cache set only have single cache. Now we don't have to maintain
an embedded partial super block in struct cache_set, the in-memory super
block can be directly referenced from struct cache.
This patch removes the embedded struct cache_sb from struct cache_set,
and fixes all locations where the superb lock was referenced from this
removed super block by referencing the in-memory super block of struct
cache.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently the cache's sync status is checked and set on cache set's in-
memory partial super block. After removing the embedded struct cache_sb
from cache set and reference cache's in-memory super block from struct
cache_set, the sync status can set and check directly on cache's super
block.
This patch checks and sets the cache sync status directly on cache's
in-memory super block. This is a preparation for later removing embedded
struct cache_sb from struct cache_set.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
After removing the embedded struct cache_sb from struct cache_set, cache
set will directly reference the in-memory super block of struct cache.
It is unnecessary to compare block_size, bucket_size and nr_in_set from
the identical in-memory super block in can_attach_cache().
This is a preparation patch for latter removing cache_set->sb from
struct cache_set.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In order to update the partial super block of cache set, the seq numbers
of cache and cache set are checked in register_cache_set(). If cache's
seq number is larger than cache set's seq number, cache set must update
its partial super block from cache's super block. It is unncessary when
the embedded struct cache_sb is removed from struct cache set.
This patch removed the seq numbers checking from register_cache_set(),
because later there will be no such partial super block in struct cache
set, the cache set will directly reference in-memory super block from
struct cache. This is a preparation patch for removing embedded struct
cache_sb from struct cache_set.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Because struct cache_set and struct cache both have struct cache_sb,
macro bucket_bytes() currently are used on both of them. When removing
the embedded struct cache_sb from struct cache_set, this macro won't be
used on struct cache_set anymore.
This patch unifies all bucket_bytes() usage only on struct cache, this is
one of the preparation to remove the embedded struct cache_sb from
struct cache_set.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It seems alloc_bucket_pages() is the only user of bucket_pages().
Considering alloc_bucket_pages() is removed from bcache code, it is safe
to remove the useless macro bucket_pages() now.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now no one uses alloc_bucket_pages() anymore, remove it from bcache.h.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Because struct cache_set and struct cache both have struct cache_sb,
therefore macro block_bytes() can be used on both of them. When removing
the embedded struct cache_sb from struct cache_set, this macro won't be
used on struct cache_set anymore.
This patch unifies all block_bytes() usage only on struct cache, this is
one of the preparation to remove the embedded struct cache_sb from
struct cache_set.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch adds a separated set_uuid[16] in struct cache_set, to store
the uuid of the cache set. This is the preparation to remove the
embedded struct cache_sb from struct cache_set.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since now each cache_set explicitly has single cache, for_each_cache()
is unnecessary. This patch removes this macro, and update all locations
where it is used, and makes sure all code logic still being consistent.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently although the bcache code has a framework for multiple caches
in a cache set, but indeed the multiple caches never completed and users
use md raid1 for multiple copies of the cached data.
This patch does the following change in struct cache_set, to explicitly
make a cache_set only have single cache,
- Change pointer array "*cache[MAX_CACHES_PER_SET]" to a single pointer
"*cache".
- Remove pointer array "*cache_by_alloc[MAX_CACHES_PER_SET]".
- Remove "caches_loaded".
Now the code looks as exactly what it does in practic: only one cache is
used in the cache set.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The parameter 'int n' from bch_bucket_alloc_set() is not cleared
defined. From the code comments n is the number of buckets to alloc, but
from the code itself 'n' is the maximum cache to iterate. Indeed all the
locations where bch_bucket_alloc_set() is called, 'n' is alwasy 1.
This patch removes the confused and unnecessary 'int n' from parameter
list of bch_bucket_alloc_set(), and explicitly allocates only 1 bucket
for its caller.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.
As inode->iprivate equals to third parameter of
debugfs_create_file() which is NULL. So it's equivalent
to original code logic.
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In mca_reserve(c) macro, we are checking root whether is NULL or not.
But that's not enough, when we read the root node in run_cache_set(),
if we got an error in bch_btree_node_read_done(), we will return
ERR_PTR(-EIO) to c->root.
And then we will go continue to unregister, but before calling
unregister_shrinker(&c->shrink), there is a possibility to call
bch_mca_count(), and we would get a crash with call trace like that:
[ 2149.876008] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000b5
... ...
[ 2150.598931] Call trace:
[ 2150.606439] bch_mca_count+0x58/0x98 [escache]
[ 2150.615866] do_shrink_slab+0x54/0x310
[ 2150.624429] shrink_slab+0x248/0x2d0
[ 2150.632633] drop_slab_node+0x54/0x88
[ 2150.640746] drop_slab+0x50/0x88
[ 2150.648228] drop_caches_sysctl_handler+0xf0/0x118
[ 2150.657219] proc_sys_call_handler.isra.18+0xb8/0x110
[ 2150.666342] proc_sys_write+0x40/0x50
[ 2150.673889] __vfs_write+0x48/0x90
[ 2150.681095] vfs_write+0xac/0x1b8
[ 2150.688145] ksys_write+0x6c/0xd0
[ 2150.695127] __arm64_sys_write+0x24/0x30
[ 2150.702749] el0_svc_handler+0xa0/0x128
[ 2150.710296] el0_svc+0x8/0xc
Signed-off-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Previously the experimental async registration uses a separate sysfs
file register_async. Now the async registration code seems working well
for a while, we can do furtuher testing with it now.
This patch changes the async bcache registration shares the same sysfs
file /sys/fs/bcache/register (and register_quiet). Async registration
will be default behavior if BCACHE_ASYNC_REGISTRATION is set in kernel
configure. By default, BCACHE_ASYNC_REGISTRATION is not configured yet.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Drivers shouldn't really mess with the readahead size, as that is a VM
concept. Instead set it based on the optimal I/O size by lifting the
algorithm from the md driver when registering the disk. Also set
bdi->io_pages there as well by applying the same scheme based on
max_sectors. To ensure the limits work well for stacking drivers a
new helper is added to update the readahead limits from the block
limits, which is also called from disk_stack_limits.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Inherit the optimal I/O size setting just like the readahead window,
as any reason to do larger I/O does not apply to just readahead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This enables proper statistics in /proc/diskstats for bcache partitions.
Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Coly Li <colyli@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=oADH
-----END PGP SIGNATURE-----
Merge tag 'for-5.9/drivers-20200803' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
- NVMe:
- ZNS support (Aravind, Keith, Matias, Niklas)
- Misc cleanups, optimizations, fixes (Baolin, Chaitanya, David,
Dongli, Max, Sagi)
- null_blk zone capacity support (Aravind)
- MD:
- raid5/6 fixes (ChangSyun)
- Warning fixes (Damien)
- raid5 stripe fixes (Guoqing, Song, Yufen)
- sysfs deadlock fix (Junxiao)
- raid10 deadlock fix (Vitaly)
- struct_size conversions (Gustavo)
- Set of bcache updates/fixes (Coly)
* tag 'for-5.9/drivers-20200803' of git://git.kernel.dk/linux-block: (117 commits)
md/raid5: Allow degraded raid6 to do rmw
md/raid5: Fix Force reconstruct-write io stuck in degraded raid5
raid5: don't duplicate code for different paths in handle_stripe
raid5-cache: hold spinlock instead of mutex in r5c_journal_mode_show
md: print errno in super_written
md/raid5: remove the redundant setting of STRIPE_HANDLE
md: register new md sysfs file 'uuid' read-only
md: fix max sectors calculation for super 1.0
nvme-loop: remove extra variable in create ctrl
nvme-loop: set ctrl state connecting after init
nvme-multipath: do not fall back to __nvme_find_path() for non-optimized paths
nvme-multipath: fix logic for non-optimized paths
nvme-rdma: fix controller reset hang during traffic
nvme-tcp: fix controller reset hang during traffic
nvmet: introduce the passthru Kconfig option
nvmet: introduce the passthru configfs interface
nvmet: Add passthru enable/disable helpers
nvmet: add passthru code to process commands
nvme: export nvme_find_get_ns() and nvme_put_ns()
nvme: introduce nvme_ctrl_get_by_path()
...
This patch is a fix to patch "bcache: fix bio_{start,end}_io_acct with
proper device". The previous patch uses a hack to temporarily set
bi_disk to bcache device, which is mistaken too.
As Christoph suggests, this patch uses disk_{start,end}_io_acct() to
count I/O for bcache device in the correct way.
Fixes: 85750aeb74 ("bcache: use bio_{start,end}_io_acct")
Signed-off-by: Coly Li <colyli@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 85750aeb74 ("bcache: use bio_{start,end}_io_acct") moves the
io account code to the location after bio_set_dev(bio, dc->bdev) in
cached_dev_make_request(). Then the account is performed incorrectly on
backing device, indeed the I/O should be counted to bcache device like
/dev/bcache0.
With the mistaken I/O account, iostat does not display I/O counts for
bcache device and all the numbers go to backing device. In writeback
mode, the hard drive may have 340K+ IOPS which is impossible and wrong
for spinning disk.
This patch introduces bch_bio_start_io_acct() and bch_bio_end_io_acct(),
which switches bio->bi_disk to bcache device before calling
bio_start_io_acct() or bio_end_io_acct(). Now the I/Os are counted to
bcache device, and bcache device, cache device and backing device have
their correct I/O count information back.
Fixes: 85750aeb74 ("bcache: use bio_{start,end}_io_acct")
Signed-off-by: Coly Li <colyli@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bcache uses struct bbio to do I/Os for meta data pages like uuids,
disk_buckets, prio_buckets, and btree nodes.
Example writing a btree node onto cache device, the process is,
- Allocate a struct bbio from mempool c->bio_meta.
- Inside struct bbio embedded a struct bio, initialize bi_inline_vecs
for this embedded bio.
- Call bch_bio_map() to map each meta data page to each bv from the
inlined bi_io_vec table.
- Call bch_submit_bbio() to submit the bio into underlying block layer.
- When the I/O completed, only release the struct bbio, don't touch the
reference counter of the meta data pages.
The struct bbio is defined as,
738 struct bbio {
739 unsigned int submit_time_us;
[snipped]
748 struct bio bio;
749 };
Because struct bio is embedded at the end of struct bbio, therefore the
actual size of struct bbio is sizeof(struct bio) + size of the embedded
bio->bi_inline_vecs.
Now all the meta data bucket size are limited to meta_bucket_pages(), if
the bucket size is large than meta_bucket_pages()*PAGE_SECTORS, rested
space in the bucket is unused. Therefore the most used space in meta
bucket is (1<<MAX_ORDER) pages, or (1<<CONFIG_FORCE_MAX_ZONEORDER) if it
is configured.
Therefore for large bucket size, it is unnecessary to calculate the
allocation size of mempool c->bio_meta as,
mempool_init_kmalloc_pool(&c->bio_meta, 2,
sizeof(struct bbio) +
sizeof(struct bio_vec) * bucket_pages(c))
It is too large, neither the Linux buddy allocator cannot allocate so
much continuous pages, nor the extra allocated pages are wasted.
This patch replace bucket_pages() to meta_bucket_pages() in two places,
- In bch_cache_set_alloc(), when initialize mempool c->bio_meta, uses
sizeof(struct bbio) + sizeof(struct bio_vec) * bucket_pages(c) to set
the allocating object size.
- In bch_bbio_alloc(), when calling bio_init() to set inline bvec talbe
bi_inline_bvecs, uses meta_bucket_pages() to indicate number of the
inline bio vencs number.
Now the maximum size of embedded bio inside struct bbio exactly matches
the limit of meta_bucket_pages(), no extra page wasted.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Mempool c->fill_iter is used to allocate memory for struct btree_iter in
bch_btree_node_read_done() to iterate all keys of a read-in btree node.
The allocation size is defined in bch_cache_set_alloc() by,
mempool_init_kmalloc_pool(&c->fill_iter, 1, iter_size))
where iter_size is defined by a calculation,
(sb->bucket_size / sb->block_size + 1) * sizeof(struct btree_iter_set)
For 16bit width bucket_size the calculation is OK, but now the bucket
size is extended to 32bit, the bucket size can be 2GB. By the above
calculation, iter_size can be 2048 pages (order 11 is still accepted by
buddy allocator).
But the actual size holds the bkeys in meta data bucket is limited to
meta_bucket_pages() already, which is 16MB. By the above calculation,
if replace sb->bucket_size by meta_bucket_pages() * PAGE_SECTORS, the
result is 16 pages. This is the size large enough for the mempool
allocation to struct btree_iter.
Therefore in worst case every time mempool c->fill_iter allocates, at
most 4080 pages are wasted and won't be used. Therefore this patch uses
meta_bucket_pages() * PAGE_SECTORS to calculate the iter size in
bch_cache_set_alloc(), to avoid extra memory allocation from mempool
c->fill_iter.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The following three sysfs files are created to display according feature
set information of bcache:
/sys/fs/bcache/<cache set UUID>/internal/feature_compat
/sys/fs/bcache/<cache set UUID>/internal/feature_ro_compat
/sys/fs/bcache/<cache set UUID>/internal/feature_incompat
is added by this patch, to display feature sets information of the cache
set.
Now only an incompat feature 'large_bucket' added in bcache, the sysfs
file content is:
[large_bucket]
string large_bucket means the running bcache drive supports incompat
feature 'large_bucket', the wrapping [] means the 'large_bucket' feature
is currently enabled on this cache set.
This patch is ready to display compat and ro_compat features, in future
once bcache code implements such feature sets, the according feature
strings will be displayed in their sysfs files too.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The large bucket feature is to extend bucket_size from 16bit to 32bit.
When create cache device on zoned device (e.g. zoned NVMe SSD), making
a single bucket cover one or more zones of the zoned device is the
simplest way to support zoned device as cache by bcache.
But current maximum bucket size is 16MB and a typical zone size of zoned
device is 256MB, this is the major motiviation to extend bucket size to
a larger bit width.
This patch is the basic and first change to support large bucket size,
the major changes it makes are,
- Add BCH_FEATURE_INCOMPAT_LARGE_BUCKET for the large bucket feature,
INCOMPAT means it introduces incompatible on-disk format change.
- Add BCH_FEATURE_INCOMPAT_FUNCS(large_bucket, LARGE_BUCKET) routines.
- Adds __le16 bucket_size_hi into struct cache_sb_disk at offset 0x8d0
for the on-disk super block format.
- For the in-memory super block struct cache_sb, member bucket_size is
extended from __u16 to __32.
- Add get_bucket_size() to combine the bucket_size and bucket_size_hi
from struct cache_sb_disk into an unsigned int value.
Since we already have large bucket size helpers meta_bucket_pages(),
meta_bucket_bytes() and alloc_meta_bucket_pages(), they make sure when
bucket size > 8MB, the memory allocation for bcache meta data bucket
won't fail no matter how large the bucket size extended. So these meta
data buckets are handled properly when the bucket size width increase
from 16bit to 32bit, we don't need to worry about them.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently the bcache internal btree node occupies a whole bucket. When
loading the btree node from cache device into memory, mca_data_alloc()
will call bch_btree_keys_alloc() to allocate memory for the whole bucket
size, ilog2(b->c->btree_pages) is send to bch_btree_keys_alloc() as the
parameter 'page_order'.
c->btree_pages is set as bucket_pages() in bch_cache_set_alloc(), for
bucket size > 8MB, ilog2(b->c->btree_pages) is 12 for 4KB page size. By
default the maximum page order __get_free_pages() accepts is MAX_ORDER
(11), in this condition bch_btree_keys_alloc() will always fail.
Because of other over-page-order allocation failure fails the cache
device registration, such btree node allocation failure wasn't observed
during runtime. After other blocking page allocation failures for bucket
size > 8MB, this btree node allocation issue may trigger potentical risk
e.g. infinite dead-loop to retry btree node allocation after failure.
This patch fixes the potential problem by setting c->btree_pages to
meta_bucket_pages() in bch_cache_set_alloc(). In the condition that
bucket size > 8MB, meta_bucket_pages() will always return a number which
won't exceed the maximum page order of the buddy allocator.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In bch_btree_cache_alloc() when CONFIG_BCACHE_DEBUG is configured,
allocate memory for c->verify_ondisk may fail if the bucket size > 8MB,
which will require __get_free_pages() to allocate continuous pages
with order > 11 (the default MAX_ORDER of Linux buddy allocator). Such
over size allocation will fail, and cause 2 problems,
- When CONFIG_BCACHE_DEBUG is configured, bch_btree_verify() does not
work, because c->verify_ondisk is NULL and bch_btree_verify() returns
immediately.
- bch_btree_cache_alloc() will fail due to c->verify_ondisk allocation
failed, then the whole cache device registration fails. And because of
this failure, the first problem of bch_btree_verify() has no chance to
be triggered.
This patch fixes the above problem by two means,
1) If pages allocation of c->verify_ondisk fails, set it to NULL and
returns bch_btree_cache_alloc() with -ENOMEM.
2) When calling __get_free_pages() to allocate c->verify_ondisk pages,
use ilog2(meta_bucket_pages(&c->sb)) to make sure ilog2() will always
generate a pages order <= MAX_ORDER (or CONFIG_FORCE_MAX_ZONEORDER).
Then the buddy system won't directly reject the allocation request.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Similar to c->uuids, struct cache's prio_buckets and disk_buckets also
have the potential memory allocation failure during cache registration
if the bucket size > 8MB.
ca->prio_buckets can be stored on cache device in multiple buckets, its
in-memory space is allocated by kzalloc() interface but normally
allocated by alloc_pages() because the size > KMALLOC_MAX_CACHE_SIZE.
So allocation of ca->prio_buckets has the MAX_ORDER restriction too. If
the bucket size > 8MB, by default the page allocator will fail because
the page order > 11 (default MAX_ORDER value). ca->prio_buckets should
also use meta_bucket_bytes(), meta_bucket_pages() to decide its memory
size and use alloc_meta_bucket_pages() to allocate pages, to avoid the
allocation failure during cache set registration when bucket size > 8MB.
ca->disk_buckets is a single bucket size memory buffer, it is used to
iterate each bucket of ca->prio_buckets, and compose the bio based on
memory of ca->disk_buckets, then write ca->disk_buckets memory to cache
disk one-by-one for each bucket of ca->prio_buckets. ca->disk_buckets
should have in-memory size exact to the meta_bucket_pages(), this is the
size that ca->prio_buckets will be stored into each on-disk bucket.
This patch fixes the above issues and handle cache's prio_buckets and
disk_buckets properly for bucket size larger than 8MB.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bcache allocates a whole bucket to store c->uuids on cache device, and
allocates continuous pages to store it in-memory. When the bucket size
exceeds maximum allocable continuous pages, bch_cache_set_alloc() will
fail and cache device registration will fail.
This patch allocates c->uuids by alloc_meta_bucket_pages(), and uses
ilog2(meta_bucket_pages(c)) to indicate order of c->uuids pages when
free it. When writing c->uuids to cache device, its size is decided
by meta_bucket_pages(c) * PAGE_SECTORS. Now c->uuids is properly handled
for bucket size > 8MB.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently the in-memory meta data like c->uuids or c->disk_buckets
are allocated by alloc_bucket_pages(). The macro alloc_bucket_pages()
calls __get_free_pages() to allocated continuous pages with order
indicated by ilog2(bucket_pages(c)),
#define alloc_bucket_pages(gfp, c) \
((void *) __get_free_pages(__GFP_ZERO|gfp, ilog2(bucket_pages(c))))
The maximum order is defined as MAX_ORDER, the default value is 11 (and
can be overwritten by CONFIG_FORCE_MAX_ZONEORDER). In bcache code the
maximum bucket size width is 16bits, this is restricted both by KEY_SIZE
size and bucket_size size from struct cache_sb_disk. The maximum 16bits
width and power-of-2 value is (1<<15) in unit of sector (512byte). It
means the maximum value of bucket size in bytes is (1<<24) bytes a.k.a
4096 pages.
When the bucket size is set to maximum permitted value, ilog2(4096) is
12, which exceeds the default maximum order __get_free_pages() can
accepted, the failed pages allocation will fail cache set registration
procedure and print a kernel oops message for the exceeded pages order.
This patch introduces meta_bucket_pages(), meta_bucket_bytes(), and
alloc_bucket_pages() helper routines. meta_bucket_pages() indicates the
maximum pages can be allocated to meta data bucket, meta_bucket_bytes()
indicates the according maximum bytes, and alloc_bucket_pages() does
the pages allocation for meta bucket. Because meta_bucket_pages()
chooses the smaller value among the bucket size and MAX_ORDER_NR_PAGES,
it still works when MAX_ORDER overwritten by CONFIG_FORCE_MAX_ZONEORDER.
Following patches will use these helper routines to decide maximum pages
can be allocated for different meta data buckets. If the bucket size is
larger than meta_bucket_bytes(), the bcache registration can continue to
success, just the space more than meta_bucket_bytes() inside the bucket
is wasted. Comparing bcache failed for large bucket size, wasting some
space for meta data buckets is acceptable at this moment.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Setting sb->first_bucket and checking sb->keys indeed are only for cache
device, it does not make sense to do them in read_super() for backing
device too.
This patch moves the related code piece into read_super_common()
explicitly for cache device and avoid the confusion.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The new added super block version BCACHE_SB_VERSION_BDEV_WITH_FEATURES
(5) BCACHE_SB_VERSION_CDEV_WITH_FEATURES value (6), is for the feature
set bits.
Devices have super block version equal to the new version will have
three new members for feature set bits in the on-disk super block,
__le64 feature_compat;
__le64 feature_incompat;
__le64 feature_ro_compat;
They are used for further new features which may introduce on-disk
format change, and avoid unncessary super block version increase.
The very basic features handling code skeleton is also initialized in
this patch.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In register_cache_set(), c is pointer to struct cache_set, and ca is
pointer to struct cache, if ca->sb.seq > c->sb.seq, it means this
registering cache has up to date version and other members, the in-
memory version and other members should be updated to the newer value.
But current implementation makes a cache set only has a single cache
device, so the above assumption works well except for a special case.
The execption is when a cache device new created and both ca->sb.seq and
c->sb.seq are 0, because the super block is never flushed out yet. In
the location for the following if() check,
2156 if (ca->sb.seq > c->sb.seq) {
2157 c->sb.version = ca->sb.version;
2158 memcpy(c->sb.set_uuid, ca->sb.set_uuid, 16);
2159 c->sb.flags = ca->sb.flags;
2160 c->sb.seq = ca->sb.seq;
2161 pr_debug("set version = %llu\n", c->sb.version);
2162 }
c->sb.version is not initialized yet and valued 0. When ca->sb.seq is 0,
the if() check will fail (because both values are 0), and the cache set
version, set_uuid, flags and seq won't be updated.
The above problem is hiden for current code, because the bucket size is
compatible among different super block version. And the next time when
running cache set again, ca->sb.seq will be larger than 0 and cache set
super block version will be updated properly.
But if the large bucket feature is enabled, sb->bucket_size is the low
16bits of the bucket size. For a power of 2 value, when the actual
bucket size exceeds 16bit width, sb->bucket_size will always be 0. Then
read_super_common() will fail because the if() check to
is_power_of_2(sb->bucket_size) is false. This is how the long time
hidden bug is triggered.
This patch modifies the if() check to the following way,
2156 if (ca->sb.seq > c->sb.seq || c->sb.seq == 0) {
Then cache set's version, set_uuid, flags and seq will always be updated
corectly including for a new created cache device.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In bch_cache_set_alloc() there is a big if() checks combined by 11 items
together. When this big if() statement fails, it is difficult to tell
exactly which item fails indeed.
This patch disassembles this big if() checks into 11 single if() checks,
which makes code debug more easier.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The improperly set bucket or block size will trigger error in
read_super_common(). For large bucket size, a more accurate error message
for invalid bucket or block size is necessary.
This patch disassembles the combined if() checks into multiple single
if() check, and provide more accurate error message for each check
failure condition.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
