atomisp_css_init() is always called after calling atomisp_power_on()
either directly or through getting a runtime-pm reference.
Likewise atomisp_css_uninit() is always called after calling
atomisp_power_off().
Move the call site of these 2 functions to inside atomisp_power_on() /
atomisp_power_off() to make this more explicit.
Note this makes atomisp_reset() also set isp_fatal_error on
atomisp_power_on() errors, where as before it only did this on
atomisp_css_init() errors. This behavior change is for the better,
since power-on failing is pretty fatal too.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
atomisp_suspend() contains a 1:1 copy of atomisp_runtime_suspend() and
the same goes for the resume() functions.
Rename the runtime functions to atomisp_power_on()/_off() and use these
as runtime-pm handlers as well as helper in other places to remove
the code duplication.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Remove the unnecessary sw_contex.power_state checks:
1. atomisp_freq_scaling() and atomisp_stop_streaming() only run when the
ISP is powered up through runtime-pm, so the checks are not necessary
2. atomisp_mrfld_pre_power_down() and atomisp_runtime_resume() are only
called through the driver-core pm handling code which already
guarantees they are not called when already powered down / up.
3. atomisp_isr() also checks isp->css_initialized which only gets set
by atomisp_css_init() which runs *after* powering up the ISP and which
gets cleared by atomisp_css_uninit() *before* powering down the ISP.
So all the checks are unnecessary, remove them as well as the
sw_contex.power_state field itself.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
atomisp_css_suspend() is a 1:1 copy of atomisp_css_uninit() and
atomisp_css_resume() is a 1:1 copy of atomisp_css_init().
Remove the 2 copies and have their one caller just call
atomisp_css_uninit() / atomisp_css_init() instead.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
atomisp_css_uninit() only runs when all streams are stopped and
atomisp_css_stop() already clears the config, so the clearing
of the config can be dropped from atomisp_css_uninit().
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
atomisp_mrfld_power_down()/_up() are unnecessary wrappers around
atomisp_mrfld_power() remove them and just call atomisp_mrfld_power()
directly.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
atomisp_reset() calls atomisp_mrfld_power_down() after calling
atomisp_runtime_suspend(), which already calls
atomisp_mrfld_power_down() itself.
And the some goes for atomisp_runtime_resume() / atomisp_mrfld_power_up().
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
After the conversion to videobuf2 userptr support is no longer needed,
drop it.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
After the conversion to videobuf2 a bunch of ia_css_frame_*()
functions are unused, remove them.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Remove atomisp_css_yuvpp_configure_viewfinder(), it is not used anywhere.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Remove ia_css_pipe_get_acc_stage_desc() and sh_css_flush(),
after removing the accelerator /dev/video# node and related ioctls
these are no longer used.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
atomisp_release() was taking pipe->vb_queue_mutex + isp->mutex at the
same time. But if the /dev/video# node is closed while still streaming
then vb2_queue_release() will call atomisp_stop_streaming() which takes
isp->mutex itself, leading to a deadlock.
To fix this only take isp->mutex after cleaning up the v4l2_fh /
the vb2_queue. While at it switch to vb2_fop_release() which will take
pipe->vb_queue_mutex for us, which also resolves a FIXME comment.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
I managed to trigger an atomisp_css_start() error by pushing my test
system towards an OOM situation, this resulted in the following errors:
atomisp-isp2 0000:00:03.0: alloc pages err...
atomisp-isp2 0000:00:03.0: hmm_bo_alloc_pages failed.
atomisp-isp2 0000:00:03.0: stream[0] start error.
But it is not entirely clear what the root cause of
the "alloc pages err..." error is. I suspect the root cause is
alloc_pages_bulk_array() failing. Add a log message to make
the root cause more clear if this is hit again.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
I managed to trigger an atomisp_css_start() error by pushing my test system
towards an OOM situation, this triggered the following WARN_ON() in
__vb2_queue_cancel() in videobuf2-core.c:
/*
* If you see this warning, then the driver isn't cleaning up properly
* after a failed start_streaming(). See the start_streaming()
* documentation in videobuf2-core.h for more information how buffers
* should be returned to vb2 in start_streaming().
*/
if (WARN_ON(atomic_read(&q->owned_by_drv_count))) {
Fix this by calling atomisp_flush_video_pipe() to return any queued buffers
back to the videobuf2-core on an atomisp_css_start() error.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
With the accel code gone this is unused, remove it.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The ATOMISP_ACC_* custom ioctls and the ACC device node have been removed
in commit a5c17adbadcb ("media: atomisp: Remove the ACC device node").
This means that pipe_configs[pipe_id].acc_extension now never gets set
which causes atomisp_compat_css20.c: __create_pipe() to always skip
creation of pipes with a pipe_id of IA_CSS_PIPE_ID_ACC / a mode of
IA_CSS_PIPE_MODE_ACC.
This allows removing of the acc_pipe creation / handling code
from mainly sh_css.c and a bunch of other places.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Standard v4l2 userspace apps do not consume the s3a statistics block
data. Until we have a userspace consumer for this (libcamera), which
might also involve changing the API for this, lower the log level
of these messages to dev_dbg() to avoid them filling up the logs.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Depending on which order userspace makes various v4l2 calls, the sensor
might still be powered down when set_fmt is called.
What should really happen here is delay the writing of the mode-related
registers till streaming is started, but for now use the same quick fix
as the atomisp_ov2680 code and call power_up() from set_fmt() in
combination with keeping track of the power-state to avoid doing the
power-up sequence twice.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Remove the complicated __atomisp_get_pipe() helper, atomisp_buf_done()
only needs the pipe pointer in cases where it has a frame, so we can
simply get the pipe from the frame using the vb_to_pipe() helper.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Make atomisp_g_fmt_cap() default to YUV420 so that it matches with what
atomisp_try_fmt_cap() and atomisp_queue_setup() do when they need to
pick a default pixelformat.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The atomisp_try_fmt() call in atomisp_try_fmt_cap() replaces
the pixelformat passed by userspace with the sensors native pixelformat.
Which always gets replaced by V4L2_PIX_FMT_YUV420 by atomisp_adjust_fmt()
because raw sensor formats are not supported.
This needs to be fixed so that userspace which does a try_fmt call before
s_fmt does not end up always getting YUV420 even if it passed something
else into the try_fmt call.
To fix this restore the userspace requested pixelformat before
the atomisp_adjust_fmt() call. atomisp_adjust_fmt() will replace this
with V4L2_PIX_FMT_YUV420 in case an unsupported format is requested.
Note this relies on the "media: atomisp: Refactor atomisp_adjust_fmt()"
change, before that atomisp_adjust_fmt() would return -EINVAL for
unsupported pixelformats.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Refactor atomisp_adjust_fmt():
1. The block starting at "format_bridge = atomisp_get_format_bridge(...)"
and ending with "if (field == V4L2_FIELD_ANY) field = V4L2_FIELD_NONE;"
is duplicated. With only the second block:
a) Properly checking that format_bridge is not NULL; amd
b) Having the special handling for IA_CSS_FRAME_FORMAT_RAW
Remove the first block.
2. On a NULL return from atomisp_get_format_bridge(f->fmt.pix.pixelformat)
fall back to V4L2_PIX_FMT_YUV420 just like in the IA_CSS_FRAME_FORMAT_RAW
case. atomisp_adjust_fmt() is used in VIDIOC_TRY_FMT handling and that
should jusy pick a fmt rather then returning -EINVAL.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
camorama calls VIDIOC_REQBUFS(V4L2_MEMORY_MMAP) to test if MMAP support
works (this was added specifically because of the previously broken
MMAP support in atomisp).
Currently this fails because atomisp_get_css_frame_info() fails in this
case. Although it is weird to call VIDIOC_REQBUFS before VIDIOC_S_FMT,
it is allowed to do this.
Fix this not working by doing a S_FMT to V4L2_PIX_FMT_YUV420 + the highest
supported resolution.
Note this will cause camorama to use mmap mode, which means it will also
use libv4l2 to do format conversion. libv4l2 will pick V4L2_PIX_FMT_RGB565
as input format and this will lead to a garbled video display. This is
a libv4lconvert bug, the RGB565 -> RGB24 path in libv4lconvert assumes
that stride == width which is not true on the atomisp.
I've already send out a libv4lconvert fix for this. Also this can be worked
around by passing --dont-use-libv4l2 as argument to camorama.
Link: https://git.linuxtv.org/v4l-utils.git/commit/?id=aecfcfccfc2f78d7531456ffa5465666c6bc641e
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
To fix atomisp_queue_setup() sometimes failing it needs to be able to call
atomisp_set_fmt(), but atomisp_queue_setup() (VIDIOC_REQBUFS) does not get
passed a file handle by the videobuf2 core.
Partly revert commit b3be98f984d4 ("media: atomisp: Remove a couple of not
useful function wrappers") so that atomisp_set_fmt() can be used
without a file handle.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Convert atomisp to use videobuf2.
This fixes mmap not working and in general moving over to
the more modern videobuf2 is a good plan.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Several places rely on the [frame_]info member being the first member of
struct ia_css_frame, so that &frame->info will yield NULL when frame is
NULL (some places already explicitly check for a NULL frame pointer but
not nearly all).
For videobuf2 support the vb2_v4l2_buffer struct needs to be embedded
in the frame struct and it needs to be the first member. Breaking the
assumption that &frame->info will yield NULL when frame is NULL.
Add a ia_css_frame_get_info() helper to return either the ia_css_frame_info
struct embedded in the frame, or NULL when the frame pointer is NULL and
use this in places where a ia_css_frame_info ptr or NULL is expected.
To make sure that we catch all uses of the info field this patch also
renames the info field to frame_info.
This is a preparation patch for converting the driver to videobuf2.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Use the new atomisp_flush_video_pipe() helper instead of open-coding it.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
With the videobuf2 conversion accessing the index of a frame is going
to become more involved and writing this out each time is undesired.
Add an 'i' helper variable for the index and assing this once as
preparation for the videobuf2 conversion.
This also makes use of the new rules wrt max line-lengths in the kernel
to avoid breaking up a bunch of lines. Not breaking these lines results
in better readable code (IMHO).
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Instead of using an integer to keep count of how many buffers have
been handed over to the ISP (buffers_in_css) move buffers handed
over to the ISP to a new buffers_in_css list_head so that we can
easily loop over them.
This removes the need for atomisp_flush_video_pipe() to loop over
all buffers and then (ab)use the state to figure out if they
were handed over to the ISP.
Since the buffers are now always on a list when owned by the driver
this also allows the buffer_done path on flush vs normal completion
to be unified (both now need a list_del()) and this common code can
now be factored out into a new atomisp_buffer_done() helper.
This is a preparation patch for moving the driver over to
the videobuf2 framework.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The atomisp_buffers_queued[_pipe] functions are not used anywhere,
remove them.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
There is no guarantee that when we stop the pipeline all buffers owned
by the CSS are cleanly returned to the videobuf queue.
This is a problem with videobuf2 which will complain loudly when not
all buffers have been returned after the streamoff() queue op has
returned.
And this also allows removing a WARN() in the continuous mode path.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
atomisp_q_video_buffers_to_css() is only used insidd atomisp_fops.c, make
it static.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add a function to initialize (rather then alloc/create) a
ia_css_frame struct based on an ia_css_frame_info struct.
This is a preparation patch for adding videobuf2 support.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add a new hmm creating function to create a vmm object from a vmalloc-ed
kernel buffer. This is a preparation patch for adding videobuf2 (and
working MMAP mode) support.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The function send_packet() has a race condition as follows:
func send_packet()
{
// do work
call usb_submit_urb()
mutex_unlock()
wait_for_event_interruptible() <-- lock gone
mutex_lock()
}
func vfd_write()
{
mutex_lock()
call send_packet() <- prev call is not completed
mutex_unlock()
}
When the mutex is unlocked and the function send_packet() waits for the
call to complete, vfd_write() can start another call, which leads to the
"URB submitted while active" warning in usb_submit_urb().
Fix this by removing the mutex_unlock() call in send_packet() and using
mutex_lock_interruptible().
Link: https://syzkaller.appspot.com/bug?id=e378e6a51fbe6c5cc43e34f131cc9a315ef0337e
Fixes: 21677cfc56 ("V4L/DVB: ir-core: add imon driver")
Reported-by: syzbot+0c3cb6dc05fbbdc3ad66@syzkaller.appspotmail.com
Signed-off-by: Gautam Menghani <gautammenghani201@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
SPI devices use the spi_device_id for module autoloading even on
systems using device tree, after commit 5fa6863ba6 ("spi: Check
we have a spi_device_id for each DT compatible"), kernel warns as
follows since the spi_device_id is missing:
SPI driver ir-spi has no spi_device_id for ir-spi-led
Add spi_device_id entries to silence the warning, and ensure driver
module autoloading works.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRSrcquik9wuZrNjXJrQl33mxwedgUCY3toaQAKCRBrQl33mxwe
dpoQAP4r5trvhHqB/9BLDYn+AwnXOewgywAoD8zBPntAL/WuBwD9HGmnwpJhGdXU
ImIEVNqjGmH9gLJjqNHPm4t4YvxgBAg=
=ZV3Y
-----END PGP SIGNATURE-----
Merge tag 'br-v6.2g' of git://linuxtv.org/hverkuil/media_tree into media_stage
Despite being big, the changes here are trivial: they just change the
probing method for I2C. So, apply it as a merge.
Tag branch
* tag 'br-v6.2g' of git://linuxtv.org/hverkuil/media_tree: (96 commits)
media: v4l2-core/tuner-core: Convert to i2c's .probe_new()
media: usb: go7007: s2250-board: Convert to i2c's .probe_new()
media: tuners/tua9001: Convert to i2c's .probe_new()
media: tuners/tda18250: Convert to i2c's .probe_new()
media: tuners/tda18212: Convert to i2c's .probe_new()
media: tuners/qm1d1c0042: Convert to i2c's .probe_new()
media: tuners/qm1d1b0004: Convert to i2c's .probe_new()
media: tuners/mxl301rf: Convert to i2c's .probe_new()
media: tuners/mt2060: Convert to i2c's .probe_new()
media: tuners/m88rs6000t: Convert to i2c's .probe_new()
media: tuners/fc2580: Convert to i2c's .probe_new()
media: tuners/e4000: Convert to i2c's .probe_new()
media: vidtv: Convert to i2c's .probe_new()
media: radio/tef6862: Convert to i2c's .probe_new()
media: radio/saa7706h: Convert to i2c's .probe_new()
media: radio/radio-tea5764: Convert to i2c's .probe_new()
media: i2c/wm8775: Convert to i2c's .probe_new()
media: i2c/wm8739: Convert to i2c's .probe_new()
media: i2c/vs6624: Convert to i2c's .probe_new()
media: i2c/vpx3220: Convert to i2c's .probe_new()
...
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The Atmel ISC driver is not compliant with media controller specification.
In order to evolve this driver, it has to move to media controller, to
support enhanced features and future products which embed it.
The move to media controller involves several changes which are
not backwards compatible with the current usability of the driver.
The best example is the way the format is propagated from the top video
driver /dev/videoX down to the sensor.
In a simple configuration sensor ==> isc , the isc just calls subdev s_fmt
and controls the sensor directly. This is achieved by having a lot of code
inside the driver that will query the subdev at probe time and make a list
of formats which are usable.
Basically the user has nothing to configure, as the isc will handle
everything at the top level. This is an easy way to capture, but also comes
with the drawback of lack of flexibility.
In a more complicated pipeline
sensor ==> controller 1 ==> controller 2 ==> isc
this will not be achievable, as controller 1 and controller 2 might be
media-controller configurable, and will not propagate the formats down to
the sensor.
After discussions with the media maintainers, the decision is to move
Atmel ISC to staging as-is, to keep the Kconfig symbols and the users
to the driver in staging. Thus, all the existing users of the non
media-controller paradigm will continue to be happy and use the old config
way.
The new driver was added in the media subsystem with a different
symbol, with the conversion to media controller done, and new users
of the driver will be able to use all the new features.
This patch is merely a file move to staging, not affecting any of the
users.
The exported symbols had to be renamed to atmel_* to avoid duplication with
the new Microchip ISC driver.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Move the media_pipeline_start/stop calls from start/stop streaming to
the new prepare_streaming and unprepare_streaming callbacks.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
As a top MC video driver, the microchip-isc should not propagate the format
to the subdevice, it should rather check at start_streaming() time if the
subdev is properly configured with a compatible format.
Removed the whole format finding logic, and reworked the format
verification at start_streaming time, such that the ISC will return an
error if the subdevice is not properly configured.
To achieve this, media_pipeline_start is called and a link_validate
callback is created to check the formats.
With this being done, the module parameter 'sensor_preferred' makes no
sense anymore. The ISC should not decide which format the sensor is using.
The ISC should only cope with the situation and inform userspace if the
streaming is possible in the current configuration.
The redesign of the format propagation has also risen the question of the
enumfmt callback. If enumfmt is called with an mbus_code, the enumfmt
handler should only return the formats that are supported for this
mbus_code. Otherwise, the enumfmt will report all the formats that the ISC
could output.
With this rework, the dynamic list of user formats is removed. It makes no
more sense to identify at complete time which formats the sensor could
emit, and add those into a separate dynamic list.
The ISC will start with a simple preconfigured default format, and at
link validate time, decide whether it can use the format that is
configured on the sink or not.
>From now on, the driver also advertises the IO_MC capability.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Prepare the support for media-controller.
This means that the capabilities of the driver have changed and now it's
capable of media controller operations.
The driver will register its media device, and add the video entity to this
media device. The subdevices are registered to the same media device.
The ISC will have a base entity which is auto-detected as
microchip_isc_base.
It will also register a subdevice that allows cropping of the incoming
frame to the maximum frame size supported by the ISC.
The ISC will create a link between the subdevice that is asynchronously
registered and the microchip_isc_scaler entity.
Then, the microchip_isc_scaler and microchip_isc_base are connected
through another link.
This patch does not change the previous capability of the driver, the
fact that the format is still being propagated from the top video node
down to the sensor.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The Atmel ISC driver will be moved to staging to support old users that
are not using the media controller paradigm.
The ISC driver was converted to media controller in the public patch
series:
https://lore.kernel.org/lkml/20220503095127.48710-1-eugen.hristev@microchip.com/T/#m2c320fa8153c01379a1c35b1d90a00903949513a
However the conversion cannot be done directly as it would affect existing
users by breaking the old way of configuration for sama5d2 platforms.
After discussions with the media maintainers, the decision is to move
Atmel ISC to staging as-is, to keep the Kconfig symbols and the users
to the driver in staging. Thus, all the existing users of the non
media-controller paradigm will continue to be happy and use the old config
way.
The converted driver would support both sama5d2 and sama7g5 platforms with
media controller paradigm, but it requires userspace configuration of the
pipeline for all the pipeline modules.
In a simple configuration sensor ==> isc , the old isc driver used to call
subdev s_fmt and control the sensor directly.
This was achieved by having a lot of code inside the driver that was
querying the subdev at probe time and made a list of formats which are
usable.
Basically the user had nothing to configure, as the isc would handle
everything at the top level. This was an easy way to capture, but also came
with the drawback of lack of flexibility.
In a more complicated pipeline
sensor ==> controller 1 ==> controller 2 ==> isc
this would not be achievable, as controller 1 and controller 2 might be
media-controller configurable, and will not propagate the formats down to
the sensor.
The new driver Microchip ISC would solve all these problems and exposes pads
entities and links to userspace.
For the ease of tracking, the patches that convert to media controller come
on top of this patch that simply readds the driver to the new location under
the new Kconfig symbols.
To differentiate between the old driver and the new driver, I have renamed
the new driver to Microchip ISC, renaming the Kconfig symbols as well, and
all the mentions inside the driver.
The only thing that remains common is the file
include/linux/atmel-isc-media.h which is the ABI for the v4l2 custom
controls that the ISC exposes.
This file is used by both driver, so I kept it as-is.
To further avoid confusion all files have been renamed and all functions
named isc_* as well.
The exported symbols have been renamed with added microchip_ prefix, to
avoid symbol duplication with the old driver, and to avoid confusion.
Other than that, I have fixed small checkpatch issues when readding the
driver.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The Atmel ISC will be moved to staging thus the atmel platform will only
have the ISI driver.
The new media-controller converted ISC driver will be placed inside a
dedicated microchip platform directory.
It is then natural to have the microchip-csi2dc moved to this new platform
directory.
The next step is to add the Microchip ISC driver to the new platform
directory and reside together with the Microchip CSI2DC driver.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
With the new prepare_streaming op it is possible to move the ugly
v4l_vb2q_enable_media_source() call in vb2_core_streamon to the
driver. It was called incorrectly in vb2 as well: it was only
called if sufficient buffers were queued at STREAMON time, but not
if more buffers were queued later. This was not an issue with the
au0828 driver since it never set min_buffers_needed.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
When userspace called VIDIOC_STREAMON, then you want to claim any streaming
resources needed and validate the video pipeline. Waiting for
start_streaming to be called is too late, since that can be postponed
until the required minimum of buffers is queued.
So add a prepare_streaming op (optional) that can be used for that
purpose, and a matching unprepare_streaming op (optional) that can
release any claimed resources. The unprepare_streaming op is called
when VIDIOC_STREAMOFF is called and q->streaming is 1, or when the
filehandle is closed while q->streaming is 1.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Document administration details about CEC devices. This was formerly
documented in a cec-status.txt I kept on my website, but this really
belongs here as an admin guide.
Updated the original cec-status.txt, and converted it to .rst.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
This cleans up a checkstyle warning where the vb2_ops struct definitions
should be const.
Signed-off-by: Ian Cowan <ian@linux.cowan.aero>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
A problem about modprobe amphion-vpu failed is triggered with the
following log given:
[ 2208.634841] Error: Driver 'amphion-vpu' is already registered, aborting...
modprobe: ERROR: could not insert 'amphion_vpu': Device or resource busy
The reason is that vpu_driver_init() returns vpu_core_driver_init()
directly without checking its return value, if vpu_core_driver_init()
failed, it returns without unregister amphion_vpu_driver, resulting the
amphion-vpu can never be installed later.
A simple call graph is shown as below:
vpu_driver_init()
platform_driver_register() # register amphion_vpu_driver
vpu_core_driver_init()
platform_driver_register()
driver_register()
bus_add_driver()
dev = kzalloc(...) # OOM happened
# return without unregister amphion_vpu_driver
Fix by unregister amphion_vpu_driver when vpu_core_driver_init() returns
error.
Fixes: b50a64fc54 ("media: amphion: add amphion vpu device driver")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: ming_qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
A problem about modprobe s5p_fimc failed is triggered with the
following log given:
[ 272.075275] Error: Driver 'exynos4-fimc' is already registered, aborting...
modprobe: ERROR: could not insert 's5p_fimc': Device or resource busy
The reason is that fimc_md_init() returns platform_driver_register()
directly without checking its return value, if platform_driver_register()
failed, it returns without unregister fimc_driver, resulting the
s5p_fimc can never be installed later.
A simple call graph is shown as below:
fimc_md_init()
fimc_register_driver() # register fimc_driver
platform_driver_register()
platform_driver_register()
driver_register()
bus_add_driver()
dev = kzalloc(...) # OOM happened
# return without unregister fimc_driver
Fix by unregister fimc_driver when platform_driver_register() returns
error.
Fixes: d3953223b0 ("[media] s5p-fimc: Add the media device driver")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
destroy_workqueue() needs be called to when driver is
unloading, fix it by using devm_add_action_or_reset()
to make workqueuedevice-managed.
Fixes: dedc215003 ("media: mtk-jpegdec: add jpeg decode worker interface")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>