Suppresses the extraneous stack and memory dump when a parallel OOM killing
has been found. There's no need to fill the ring buffer with this information
if its already been printed and the condition that triggered the previous OOM
killer has not yet been alleviated.
Cc: Andrea Arcangeli <andrea@suse.de>
Acked-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Adds a new sysctl, 'oom_kill_allocating_task', which will automatically kill
the OOM-triggering task instead of scanning through the tasklist to find a
memory-hogging target. This is helpful for systems with an insanely large
number of tasks where scanning the tasklist significantly degrades
performance.
Cc: Andrea Arcangeli <andrea@suse.de>
Acked-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A final allocation attempt with a very high watermark needs to be attempted
before invoking out_of_memory(). OOM killer serialization needs to occur
before this final attempt, otherwise tasks attempting to OOM-lock all zones in
its zonelist may spin and acquire the lock unnecessarily after the OOM
condition has already been alleviated.
If the final allocation does succeed, the zonelist is simply OOM-unlocked and
__alloc_pages() returns the page. Otherwise, the OOM killer is invoked.
If the task cannot acquire OOM-locks on all zones in its zonelist, it is put
to sleep and the allocation is retried when it gets rescheduled. One of its
zones is already marked as being in the OOM killer so it'll hopefully be
getting some free memory soon, at least enough to satisfy a high watermark
allocation attempt. This prevents needlessly killing a task when the OOM
condition would have already been alleviated if it had simply been given
enough time.
Cc: Andrea Arcangeli <andrea@suse.de>
Acked-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
OOM killer synchronization should be done with zone granularity so that memory
policy and cpuset allocations may have their corresponding zones locked and
allow parallel kills for other OOM conditions that may exist elsewhere in the
system. DMA allocations can be targeted at the zone level, which would not be
possible if locking was done in nodes or globally.
Synchronization shall be done with a variation of "trylocks." The goal is to
put the current task to sleep and restart the failed allocation attempt later
if the trylock fails. Otherwise, the OOM killer is invoked.
Each zone in the zonelist that __alloc_pages() was called with is checked for
the newly-introduced ZONE_OOM_LOCKED flag. If any zone has this flag present,
the "trylock" to serialize the OOM killer fails and returns zero. Otherwise,
all the zones have ZONE_OOM_LOCKED set and the try_set_zone_oom() function
returns non-zero.
Cc: Andrea Arcangeli <andrea@suse.de>
Cc: Christoph Lameter <clameter@sgi.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Convert the int all_unreclaimable member of struct zone to unsigned long
flags. This can now be used to specify several different zone flags such as
all_unreclaimable and reclaim_in_progress, which can now be removed and
converted to a per-zone flag.
Flags are set and cleared as follows:
zone_set_flag(struct zone *zone, zone_flags_t flag)
zone_clear_flag(struct zone *zone, zone_flags_t flag)
Defines the first zone flags, ZONE_ALL_UNRECLAIMABLE and ZONE_RECLAIM_LOCKED,
which have the same semantics as the old zone->all_unreclaimable and
zone->reclaim_in_progress, respectively. Also converts all current users that
set or clear either flag to use the new interface.
Helper functions are defined to test the flags:
int zone_is_all_unreclaimable(const struct zone *zone)
int zone_is_reclaim_locked(const struct zone *zone)
All flag operators are of the atomic variety because there are currently
readers that are implemented that do not take zone->lock.
[akpm@linux-foundation.org: add needed include]
Cc: Andrea Arcangeli <andrea@suse.de>
Acked-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The OOM killer's CONSTRAINT definitions are really more appropriate in an
enum, so define them in include/linux/oom.h.
Cc: Andrea Arcangeli <andrea@suse.de>
Acked-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Move the OOM killer's extern function prototypes to include/linux/oom.h and
include it where necessary.
[clg@fr.ibm.com: build fix]
Cc: Andrea Arcangeli <andrea@suse.de>
Acked-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Cedric Le Goater <clg@fr.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Slab constructors currently have a flags parameter that is never used. And
the order of the arguments is opposite to other slab functions. The object
pointer is placed before the kmem_cache pointer.
Convert
ctor(void *object, struct kmem_cache *s, unsigned long flags)
to
ctor(struct kmem_cache *s, void *object)
throughout the kernel
[akpm@linux-foundation.org: coupla fixes]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Move irq handling out of new slab into __slab_alloc. That is useful for
Mathieu's cmpxchg_local patchset and also allows us to remove the crude
local_irq_off in early_kmem_cache_alloc().
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Based on ideas of Andrew:
http://marc.info/?l=linux-kernel&m=102912915020543&w=2
Scale the bdi dirty limit inversly with the tasks dirty rate.
This makes heavy writers have a lower dirty limit than the occasional writer.
Andrea proposed something similar:
http://lwn.net/Articles/152277/
The main disadvantage to his patch is that he uses an unrelated quantity to
measure time, which leaves him with a workload dependant tunable. Other than
that the two approaches appear quite similar.
[akpm@linux-foundation.org: fix warning]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Scale writeback cache per backing device, proportional to its writeout speed.
By decoupling the BDI dirty thresholds a number of problems we currently have
will go away, namely:
- mutual interference starvation (for any number of BDIs);
- deadlocks with stacked BDIs (loop, FUSE and local NFS mounts).
It might be that all dirty pages are for a single BDI while other BDIs are
idling. By giving each BDI a 'fair' share of the dirty limit, each one can have
dirty pages outstanding and make progress.
A global threshold also creates a deadlock for stacked BDIs; when A writes to
B, and A generates enough dirty pages to get throttled, B will never start
writeback until the dirty pages go away. Again, by giving each BDI its own
'independent' dirty limit, this problem is avoided.
So the problem is to determine how to distribute the total dirty limit across
the BDIs fairly and efficiently. A DBI that has a large dirty limit but does
not have any dirty pages outstanding is a waste.
What is done is to keep a floating proportion between the DBIs based on
writeback completions. This way faster/more active devices get a larger share
than slower/idle devices.
[akpm@linux-foundation.org: fix warnings]
[hugh@veritas.com: Fix occasional hang when a task couldn't get out of balance_dirty_pages]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Provide scalable per backing_dev_info statistics counters.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
These patches aim to improve balance_dirty_pages() and directly address three
issues:
1) inter device starvation
2) stacked device deadlocks
3) inter process starvation
1 and 2 are a direct result from removing the global dirty limit and using
per device dirty limits. By giving each device its own dirty limit is will
no longer starve another device, and the cyclic dependancy on the dirty limit
is broken.
In order to efficiently distribute the dirty limit across the independant
devices a floating proportion is used, this will allocate a share of the total
limit proportional to the device's recent activity.
3 is done by also scaling the dirty limit proportional to the current task's
recent dirty rate.
This patch:
nfs: remove congestion_end(). It's redundant, clear_bdi_congested() already
wakes the waiters.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When a pagetable is created, it is made globally visible in the rmap
prio tree before it is pinned via arch_dup_mmap(), and remains in the
rmap tree while it is unpinned with arch_exit_mmap().
This means that other CPUs may race with the pinning/unpinning
process, and see a pte between when it gets marked RO and actually
pinned, causing any pte updates to fail with write-protect faults.
As a result, all pte pages must be properly locked, and only unlocked
once the pinning/unpinning process has finished.
In order to avoid taking spinlocks for the whole pagetable - which may
overflow the PREEMPT_BITS portion of preempt counter - it locks and pins
each pte page individually, and then finally pins the whole pagetable.
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Hugh Dickens <hugh@veritas.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andi Kleen <ak@suse.de>
Cc: Keir Fraser <keir@xensource.com>
Cc: Jan Beulich <jbeulich@novell.com>
This patch contains the following cleanups:
- make the needlessly global setup_vmstat() static
- remove the unused refresh_vm_stats()
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch contains the following cleanups:
- every file should include the headers containing the prototypes for
its global functions
- make the follosing needlessly global functions static:
- migrate_to_node()
- do_mbind()
- sp_alloc()
- mpol_rebind_policy()
[akpm@linux-foundation.org: fix uninitialised var warning]
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch makes three needlessly global functions static.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When gather_surplus_pages() fails to allocate enough huge pages to satisfy
the requested reservation, it frees what it did allocate back to the buddy
allocator. put_page() should be called instead of update_and_free_page()
to ensure that pool counters are updated as appropriate and the page's
refcount is decremented.
Signed-off-by: Adam Litke <agl@us.ibm.com>
Acked-by: Dave Hansen <haveblue@us.ibm.com>
Cc: David Gibson <hermes@gibson.dropbear.id.au>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Cc: Ken Chen <kenchen@google.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Anton found a problem with the hugetlb pool allocation when some nodes have
no memory (http://marc.info/?l=linux-mm&m=118133042025995&w=2). Lee worked
on versions that tried to fix it, but none were accepted. Christoph has
created a set of patches which allow for GFP_THISNODE allocations to fail
if the node has no memory.
Currently, alloc_fresh_huge_page() returns NULL when it is not able to
allocate a huge page on the current node, as specified by its custom
interleave variable. The callers of this function, though, assume that a
failure in alloc_fresh_huge_page() indicates no hugepages can be allocated
on the system period. This might not be the case, for instance, if we have
an uneven NUMA system, and we happen to try to allocate a hugepage on a
node with less memory and fail, while there is still plenty of free memory
on the other nodes.
To correct this, make alloc_fresh_huge_page() search through all online
nodes before deciding no hugepages can be allocated. Add a helper function
for actually allocating the hugepage. Use a new global nid iterator to
control which nid to allocate on.
Note: we expect particular semantics for __GFP_THISNODE, which are now
enforced even for memoryless nodes. That is, there is should be no
fallback to other nodes. Therefore, we rely on the nid passed into
alloc_pages_node() to be the nid the page comes from. If this is
incorrect, accounting will break.
Tested on x86 !NUMA, x86 NUMA, x86_64 NUMA and ppc64 NUMA (with 2
memoryless nodes).
Before on the ppc64 box:
Trying to clear the hugetlb pool
Done. 0 free
Trying to resize the pool to 100
Node 0 HugePages_Free: 25
Node 1 HugePages_Free: 75
Node 2 HugePages_Free: 0
Node 3 HugePages_Free: 0
Done. Initially 100 free
Trying to resize the pool to 200
Node 0 HugePages_Free: 50
Node 1 HugePages_Free: 150
Node 2 HugePages_Free: 0
Node 3 HugePages_Free: 0
Done. 200 free
After:
Trying to clear the hugetlb pool
Done. 0 free
Trying to resize the pool to 100
Node 0 HugePages_Free: 50
Node 1 HugePages_Free: 50
Node 2 HugePages_Free: 0
Node 3 HugePages_Free: 0
Done. Initially 100 free
Trying to resize the pool to 200
Node 0 HugePages_Free: 100
Node 1 HugePages_Free: 100
Node 2 HugePages_Free: 0
Node 3 HugePages_Free: 0
Done. 200 free
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Acked-by: Christoph Lameter <clameter@sgi.com>
Cc: Adam Litke <agl@us.ibm.com>
Cc: David Gibson <hermes@gibson.dropbear.id.au>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Cc: Ken Chen <kenchen@google.com>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When shrinking the size of the hugetlb pool via the nr_hugepages sysctl, we
are careful to keep enough pages around to satisfy reservations. But the
calculation is flawed for the following scenario:
Action Pool Counters (Total, Free, Resv)
====== =============
Set pool to 1 page 1 1 0
Map 1 page MAP_PRIVATE 1 1 0
Touch the page to fault it in 1 0 0
Set pool to 3 pages 3 2 0
Map 2 pages MAP_SHARED 3 2 2
Set pool to 2 pages 2 1 2 <-- Mistake, should be 3 2 2
Touch the 2 shared pages 2 0 1 <-- Program crashes here
The last touch above will terminate the process due to lack of huge pages.
This patch corrects the calculation so that it factors in pages being used
for private mappings. Andrew, this is a standalone fix suitable for
mainline. It is also now corrected in my latest dynamic pool resizing
patchset which I will send out soon.
Signed-off-by: Adam Litke <agl@us.ibm.com>
Acked-by: Ken Chen <kenchen@google.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Cc: William Lee Irwin III <wli@holomorphy.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The maximum size of the huge page pool can be controlled using the overall
size of the hugetlb filesystem (via its 'size' mount option). However in the
common case the this will not be set as the pool is traditionally fixed in
size at boot time. In order to maintain the expected semantics, we need to
prevent the pool expanding by default.
This patch introduces a new sysctl controlling dynamic pool resizing. When
this is enabled the pool will expand beyond its base size up to the size of
the hugetlb filesystem. It is disabled by default.
Signed-off-by: Adam Litke <agl@us.ibm.com>
Acked-by: Andy Whitcroft <apw@shadowen.org>
Acked-by: Dave McCracken <dave.mccracken@oracle.com>
Cc: William Irwin <bill.irwin@oracle.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Ken Chen <kenchen@google.com>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Shared mappings require special handling because the huge pages needed to
fully populate the VMA must be reserved at mmap time. If not enough pages are
available when making the reservation, allocate all of the shortfall at once
from the buddy allocator and add the pages directly to the hugetlb pool. If
they cannot be allocated, then fail the mapping. The page surplus is
accounted for in the same way as for private mappings; faulted surplus pages
will be freed at unmap time. Reserved, surplus pages that have not been used
must be freed separately when their reservation has been released.
Signed-off-by: Adam Litke <agl@us.ibm.com>
Acked-by: Andy Whitcroft <apw@shadowen.org>
Acked-by: Dave McCracken <dave.mccracken@oracle.com>
Cc: William Irwin <bill.irwin@oracle.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Ken Chen <kenchen@google.com>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Because we overcommit hugepages for MAP_PRIVATE mappings, it is possible that
the hugetlb pool will be exhausted or completely reserved when a hugepage is
needed to satisfy a page fault. Before killing the process in this situation,
try to allocate a hugepage directly from the buddy allocator.
The explicitly configured pool size becomes a low watermark. When dynamically
grown, the allocated huge pages are accounted as a surplus over the watermark.
As huge pages are freed on a node, surplus pages are released to the buddy
allocator so that the pool will shrink back to the watermark.
Surplus accounting also allows for friendlier explicit pool resizing. When
shrinking a pool that is fully in-use, increase the surplus so pages will be
returned to the buddy allocator as soon as they are freed. When growing a
pool that has a surplus, consume the surplus first and then allocate new
pages.
Signed-off-by: Adam Litke <agl@us.ibm.com>
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Andy Whitcroft <apw@shadowen.org>
Acked-by: Dave McCracken <dave.mccracken@oracle.com>
Cc: William Irwin <bill.irwin@oracle.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Ken Chen <kenchen@google.com>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dynamic huge page pool resizing.
In most real-world scenarios, configuring the size of the hugetlb pool
correctly is a difficult task. If too few pages are allocated to the pool,
applications using MAP_SHARED may fail to mmap() a hugepage region and
applications using MAP_PRIVATE may receive SIGBUS. Isolating too much memory
in the hugetlb pool means it is not available for other uses, especially those
programs not using huge pages.
The obvious answer is to let the hugetlb pool grow and shrink in response to
the runtime demand for huge pages. The work Mel Gorman has been doing to
establish a memory zone for movable memory allocations makes dynamically
resizing the hugetlb pool reliable within the limits of that zone. This patch
series implements dynamic pool resizing for private and shared mappings while
being careful to maintain existing semantics. Please reply with your comments
and feedback; even just to say whether it would be a useful feature to you.
Thanks.
How it works
============
Upon depletion of the hugetlb pool, rather than reporting an error immediately,
first try and allocate the needed huge pages directly from the buddy allocator.
Care must be taken to avoid unbounded growth of the hugetlb pool, so the
hugetlb filesystem quota is used to limit overall pool size.
The real work begins when we decide there is a shortage of huge pages. What
happens next depends on whether the pages are for a private or shared mapping.
Private mappings are straightforward. At fault time, if alloc_huge_page()
fails, we allocate a page from the buddy allocator and increment the source
node's surplus_huge_pages counter. When free_huge_page() is called for a page
on a node with a surplus, the page is freed directly to the buddy allocator
instead of the hugetlb pool.
Because shared mappings require all of the pages to be reserved up front, some
additional work must be done at mmap() to support them. We determine the
reservation shortage and allocate the required number of pages all at once.
These pages are then added to the hugetlb pool and marked reserved. Where that
is not possible the mmap() will fail. As with private mappings, the
appropriate surplus counters are updated. Since reserved huge pages won't
necessarily be used by the process, we can't be sure that free_huge_page() will
always be called to return surplus pages to the buddy allocator. To prevent
the huge page pool from bloating, we must free unused surplus pages when their
reservation has ended.
Controlling it
==============
With the entire patch series applied, pool resizing is off by default so unless
specific action is taken, the semantics are unchanged.
To take advantage of the flexibility afforded by this patch series one must
tolerate a change in semantics. To control hugetlb pool growth, the following
techniques can be employed:
* A sysctl tunable to enable/disable the feature entirely
* The size= mount option for hugetlbfs filesystems to limit pool size
Performance
===========
When contiguous memory is readily available, it is expected that the cost of
dynamicly resizing the pool will be small. This series has been performance
tested with 'stream' to measure this cost.
Stream (http://www.cs.virginia.edu/stream/) was linked with libhugetlbfs to
enable remapping of the text and data/bss segments into huge pages.
Stream with small array
-----------------------
Baseline: nr_hugepages = 0, No libhugetlbfs segment remapping
Preallocated: nr_hugepages = 5, Text and data/bss remapping
Dynamic: nr_hugepages = 0, Text and data/bss remapping
Rate (MB/s)
Function Baseline Preallocated Dynamic
Copy: 4695.6266 5942.8371 5982.2287
Scale: 4451.5776 5017.1419 5658.7843
Add: 5815.8849 7927.7827 8119.3552
Triad: 5949.4144 8527.6492 8110.6903
Stream with large array
-----------------------
Baseline: nr_hugepages = 0, No libhugetlbfs segment remapping
Preallocated: nr_hugepages = 67, Text and data/bss remapping
Dynamic: nr_hugepages = 0, Text and data/bss remapping
Rate (MB/s)
Function Baseline Preallocated Dynamic
Copy: 2227.8281 2544.2732 2546.4947
Scale: 2136.3208 2430.7294 2421.2074
Add: 2773.1449 4004.0021 3999.4331
Triad: 2748.4502 3777.0109 3773.4970
* All numbers are averages taken from 10 consecutive runs with a maximum
standard deviation of 1.3 percent noted.
This patch:
Simply move update_and_free_page() so that it can be reused later in this
patch series. The implementation is not changed.
Signed-off-by: Adam Litke <agl@us.ibm.com>
Acked-by: Andy Whitcroft <apw@shadowen.org>
Acked-by: Dave McCracken <dave.mccracken@oracle.com>
Acked-by: William Irwin <bill.irwin@oracle.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Ken Chen <kenchen@google.com>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch is to avoid panic when memory hot-add is executed with
sparsemem-vmemmap. Current vmemmap-sparsemem code doesn't support memory
hot-add. Vmemmap must be populated when hot-add. This is for
2.6.23-rc2-mm2.
Todo: # Even if this patch is applied, the message "[xxxx-xxxx] potential
offnode page_structs" is displayed. To allocate memmap on its node,
memmap (and pgdat) must be initialized itself like chicken and
egg relationship.
# vmemmap_unpopulate will be necessary for followings.
- For cancel hot-add due to error.
- For unplug.
Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now, arch dependent code around CONFIG_MEMORY_HOTREMOVE is a mess.
This patch cleans up them. This is against 2.6.23-rc6-mm1.
- fix compile failure on ia64/ CONFIG_MEMORY_HOTPLUG && !CONFIG_MEMORY_HOTREMOVE case.
- For !CONFIG_MEMORY_HOTREMOVE, add generic no-op remove_memory(),
which returns -EINVAL.
- removed remove_pages() only used in powerpc.
- removed no-op remove_memory() in i386, sh, sparc64, x86_64.
- only powerpc returns -ENOSYS at memory hot remove(no-op). changes it
to return -EINVAL.
Note:
Currently, only ia64 supports CONFIG_MEMORY_HOTREMOVE. I welcome other
archs if there are requirements and testers.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Logic.
- set all pages in [start,end) as isolated migration-type.
by this, all free pages in the range will be not-for-use.
- Migrate all LRU pages in the range.
- Test all pages in the range's refcnt is zero or not.
Todo:
- allocate migration destination page from better area.
- confirm page_count(page)== 0 && PageReserved(page) page is safe to be freed..
(I don't like this kind of page but..
- Find out pages which cannot be migrated.
- more running tests.
- Use reclaim for unplugging other memory type area.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Implement generic chunk-of-pages isolation method by using page grouping ops.
This patch add MIGRATE_ISOLATE to MIGRATE_TYPES. By this
- MIGRATE_TYPES increases.
- bitmap for migratetype is enlarged.
pages of MIGRATE_ISOLATE migratetype will not be allocated even if it is free.
By this, you can isolated *freed* pages from users. How-to-free pages is not
a purpose of this patch. You may use reclaim and migrate codes to free pages.
If start_isolate_page_range(start,end) is called,
- migratetype of the range turns to be MIGRATE_ISOLATE if
its type is MIGRATE_MOVABLE. (*) this check can be updated if other
memory reclaiming works make progress.
- MIGRATE_ISOLATE is not on migratetype fallback list.
- All free pages and will-be-freed pages are isolated.
To check all pages in the range are isolated or not, use test_pages_isolated(),
To cancel isolation, use undo_isolate_page_range().
Changes V6 -> V7
- removed unnecessary #ifdef
There are HOLES_IN_ZONE handling codes...I'm glad if we can remove them..
Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A clean up patch for "scanning memory resource [start, end)" operation.
Now, find_next_system_ram() function is used in memory hotplug, but this
interface is not easy to use and codes are complicated.
This patch adds walk_memory_resouce(start,len,arg,func) function.
The function 'func' is called per valid memory resouce range in [start,pfn).
[pbadari@us.ibm.com: Error handling in walk_memory_resource()]
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The statistics patch later needs to know what order a free page is on the free
lists. Rather than having special knowledge of page_private() when
PageBuddy() is set, this patch places out page_order() in internal.h and adds
a VM_BUG_ON to catch using it on non-PageBuddy pages.
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Acked-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We touch a cacheline in the kmem_cache structure for zeroing to get the
size. However, the hot paths in slab_alloc and slab_free do not reference
any other fields in kmem_cache, so we may have to just bring in the
cacheline for this one access.
Add a new field to kmem_cache_cpu that contains the object size. That
cacheline must already be used in the hotpaths. So we save one cacheline
on every slab_alloc if we zero.
We need to update the kmem_cache_cpu object size if an aliasing operation
changes the objsize of an non debug slab.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The kmem_cache_cpu structures introduced are currently an array placed in the
kmem_cache struct. Meaning the kmem_cache_cpu structures are overwhelmingly
on the wrong node for systems with a higher amount of nodes. These are
performance critical structures since the per node information has
to be touched for every alloc and free in a slab.
In order to place the kmem_cache_cpu structure optimally we put an array
of pointers to kmem_cache_cpu structs in kmem_cache (similar to SLAB).
However, the kmem_cache_cpu structures can now be allocated in a more
intelligent way.
We would like to put per cpu structures for the same cpu but different
slab caches in cachelines together to save space and decrease the cache
footprint. However, the slab allocators itself control only allocations
per node. We set up a simple per cpu array for every processor with
100 per cpu structures which is usually enough to get them all set up right.
If we run out then we fall back to kmalloc_node. This also solves the
bootstrap problem since we do not have to use slab allocator functions
early in boot to get memory for the small per cpu structures.
Pro:
- NUMA aware placement improves memory performance
- All global structures in struct kmem_cache become readonly
- Dense packing of per cpu structures reduces cacheline
footprint in SMP and NUMA.
- Potential avoidance of exclusive cacheline fetches
on the free and alloc hotpath since multiple kmem_cache_cpu
structures are in one cacheline. This is particularly important
for the kmalloc array.
Cons:
- Additional reference to one read only cacheline (per cpu
array of pointers to kmem_cache_cpu) in both slab_alloc()
and slab_free().
[akinobu.mita@gmail.com: fix cpu hotplug offline/online path]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: "Pekka Enberg" <penberg@cs.helsinki.fi>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Set c->node to -1 if we allocate from a debug slab instead for SlabDebug
which requires access the page struct cacheline.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Tested-by: Alexey Dobriyan <adobriyan@sw.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We need the offset from the page struct during slab_alloc and slab_free. In
both cases we also reference the cacheline of the kmem_cache_cpu structure.
We can therefore move the offset field into the kmem_cache_cpu structure
freeing up 16 bits in the page struct.
Moving the offset allows an allocation from slab_alloc() without touching the
page struct in the hot path.
The only thing left in slab_free() that touches the page struct cacheline for
per cpu freeing is the checking of SlabDebug(page). The next patch deals with
that.
Use the available 16 bits to broaden page->inuse. More than 64k objects per
slab become possible and we can get rid of the checks for that limitation.
No need anymore to shrink the order of slabs if we boot with 2M sized slabs
(slub_min_order=9).
No need anymore to switch off the offset calculation for very large slabs
since the field in the kmem_cache_cpu structure is 32 bits and so the offset
field can now handle slab sizes of up to 8GB.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After moving the lockless_freelist to kmem_cache_cpu we no longer need
page->lockless_freelist. Restructure the use of the struct page fields in
such a way that we never touch the mapping field.
This is turn allows us to remove the special casing of SLUB when determining
the mapping of a page (needed for corner cases of virtual caches machines that
need to flush caches of processors mapping a page).
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A remote free may access the same page struct that also contains the lockless
freelist for the cpu slab. If objects have a short lifetime and are freed by
a different processor then remote frees back to the slab from which we are
currently allocating are frequent. The cacheline with the page struct needs
to be repeately acquired in exclusive mode by both the allocating thread and
the freeing thread. If this is frequent enough then performance will suffer
because of cacheline bouncing.
This patchset puts the lockless_freelist pointer in its own cacheline. In
order to make that happen we introduce a per cpu structure called
kmem_cache_cpu.
Instead of keeping an array of pointers to page structs we now keep an array
to a per cpu structure that--among other things--contains the pointer to the
lockless freelist. The freeing thread can then keep possession of exclusive
access to the page struct cacheline while the allocating thread keeps its
exclusive access to the cacheline containing the per cpu structure.
This works as long as the allocating cpu is able to service its request
from the lockless freelist. If the lockless freelist runs empty then the
allocating thread needs to acquire exclusive access to the cacheline with
the page struct lock the slab.
The allocating thread will then check if new objects were freed to the per
cpu slab. If so it will keep the slab as the cpu slab and continue with the
recently remote freed objects. So the allocating thread can take a series
of just freed remote pages and dish them out again. Ideally allocations
could be just recycling objects in the same slab this way which will lead
to an ideal allocation / remote free pattern.
The number of objects that can be handled in this way is limited by the
capacity of one slab. Increasing slab size via slub_min_objects/
slub_max_order may increase the number of objects and therefore performance.
If the allocating thread runs out of objects and finds that no objects were
put back by the remote processor then it will retrieve a new slab (from the
partial lists or from the page allocator) and start with a whole
new set of objects while the remote thread may still be freeing objects to
the old cpu slab. This may then repeat until the new slab is also exhausted.
If remote freeing has freed objects in the earlier slab then that earlier
slab will now be on the partial freelist and the allocating thread will
pick that slab next for allocation. So the loop is extended. However,
both threads need to take the list_lock to make the swizzling via
the partial list happen.
It is likely that this kind of scheme will keep the objects being passed
around to a small set that can be kept in the cpu caches leading to increased
performance.
More code cleanups become possible:
- Instead of passing a cpu we can now pass a kmem_cache_cpu structure around.
Allows reducing the number of parameters to various functions.
- Can define a new node_match() function for NUMA to encapsulate locality
checks.
Effect on allocations:
Cachelines touched before this patch:
Write: page cache struct and first cacheline of object
Cachelines touched after this patch:
Write: kmem_cache_cpu cacheline and first cacheline of object
Read: page cache struct (but see later patch that avoids touching
that cacheline)
The handling when the lockless alloc list runs empty gets to be a bit more
complicated since another cacheline has now to be written to. But that is
halfway out of the hot path.
Effect on freeing:
Cachelines touched before this patch:
Write: page_struct and first cacheline of object
Cachelines touched after this patch depending on how we free:
Write(to cpu_slab): kmem_cache_cpu struct and first cacheline of object
Write(to other): page struct and first cacheline of object
Read(to cpu_slab): page struct to id slab etc. (but see later patch that
avoids touching the page struct on free)
Read(to other): cpu local kmem_cache_cpu struct to verify its not
the cpu slab.
Summary:
Pro:
- Distinct cachelines so that concurrent remote frees and local
allocs on a cpuslab can occur without cacheline bouncing.
- Avoids potential bouncing cachelines because of neighboring
per cpu pointer updates in kmem_cache's cpu_slab structure since
it now grows to a cacheline (Therefore remove the comment
that talks about that concern).
Cons:
- Freeing objects now requires the reading of one additional
cacheline. That can be mitigated for some cases by the following
patches but its not possible to completely eliminate these
references.
- Memory usage grows slightly.
The size of each per cpu object is blown up from one word
(pointing to the page_struct) to one cacheline with various data.
So this is NR_CPUS*NR_SLABS*L1_BYTES more memory use. Lets say
NR_SLABS is 100 and a cache line size of 128 then we have just
increased SLAB metadata requirements by 12.8k per cpu.
(Another later patch reduces these requirements)
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch makes needlessly global code static.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch provides fragmentation avoidance statistics via /proc/pagetypeinfo.
The information is collected only on request so there is no runtime overhead.
The statistics are in three parts:
The first part prints information on the size of blocks that pages are
being grouped on and looks like
Page block order: 10
Pages per block: 1024
The second part is a more detailed version of /proc/buddyinfo and looks like
Free pages count per migrate type at order 0 1 2 3 4 5 6 7 8 9 10
Node 0, zone DMA, type Unmovable 0 0 0 0 0 0 0 0 0 0 0
Node 0, zone DMA, type Reclaimable 1 0 0 0 0 0 0 0 0 0 0
Node 0, zone DMA, type Movable 0 0 0 0 0 0 0 0 0 0 0
Node 0, zone DMA, type Reserve 0 4 4 0 0 0 0 1 0 1 0
Node 0, zone Normal, type Unmovable 111 8 4 4 2 3 1 0 0 0 0
Node 0, zone Normal, type Reclaimable 293 89 8 0 0 0 0 0 0 0 0
Node 0, zone Normal, type Movable 1 6 13 9 7 6 3 0 0 0 0
Node 0, zone Normal, type Reserve 0 0 0 0 0 0 0 0 0 0 4
The third part looks like
Number of blocks type Unmovable Reclaimable Movable Reserve
Node 0, zone DMA 0 1 2 1
Node 0, zone Normal 3 17 94 4
To walk the zones within a node with interrupts disabled, walk_zones_in_node()
is introduced and shared between /proc/buddyinfo, /proc/zoneinfo and
/proc/pagetypeinfo to reduce code duplication. It seems specific to what
vmstat.c requires but could be broken out as a general utility function in
mmzone.c if there were other other potential users.
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Andy Whitcroft <apw@shadowen.org>
Acked-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently mobility grouping works at the MAX_ORDER_NR_PAGES level. This makes
sense for the majority of users where this is also the huge page size.
However, on platforms like ia64 where the huge page size is runtime
configurable it is desirable to group at a lower order. On x86_64 and
occasionally on x86, the hugepage size may not always be MAX_ORDER_NR_PAGES.
This patch groups pages together based on the value of HUGETLB_PAGE_ORDER. It
uses a compile-time constant if possible and a variable where the huge page
size is runtime configurable.
It is assumed that grouping should be done at the lowest sensible order and
that the user would not want to override this. If this is not true,
page_block order could be forced to a variable initialised via a boot-time
kernel parameter.
One potential issue with this patch is that IA64 now parses hugepagesz with
early_param() instead of __setup(). __setup() is called after the memory
allocator has been initialised and the pageblock bitmaps already setup. In
tests on one IA64 there did not seem to be any problem with using
early_param() and in fact may be more correct as it guarantees the parameter
is handled before the parsing of hugepages=.
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Andy Whitcroft <apw@shadowen.org>
Acked-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
move_freepages_block() returns the number of blocks moved. This value is used
to determine if a block of pages should be stolen for the exclusive use of a
migrate type or not. However, the value returned is being used correctly.
This patch fixes the calculation to return the number of base pages that have
been moved.
This should be considered a fix to the patch
move-free-pages-between-lists-on-steal.patch
Credit to Andy Whitcroft for spotting the problem.
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Andy Whitcroft <apw@shadowen.org>
Acked-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Grouping high-order atomic allocations together was intended to allow
bursty users of atomic allocations to work such as e1000 in situations
where their preallocated buffers were depleted. This did not work in at
least one case with a wireless network adapter needing order-1 allocations
frequently. To resolve that, the free pages used for min_free_kbytes were
moved to separate contiguous blocks with the patch
bias-the-location-of-pages-freed-for-min_free_kbytes-in-the-same-max_order_nr_pages-blocks.
It is felt that keeping the free pages in the same contiguous blocks should
be sufficient for bursty short-lived high-order atomic allocations to
succeed, maybe even with the e1000. Even if there is a failure, increasing
the value of min_free_kbytes will free pages as contiguous bloks in
contrast to the standard buddy allocator which makes no attempt to keep the
minimum number of free pages contiguous.
This patch backs out grouping high order atomic allocations together to
determine if it is really needed or not. If a new report comes in about
high-order atomic allocations failing, the feature can be reintroduced to
determine if it fixes the problem or not. As a side-effect, this patch
reduces by 1 the number of bits required to track the mobility type of
pages within a MAX_ORDER_NR_PAGES block.
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Grouping pages by mobility can be disabled at compile-time. This was
considered undesirable by a number of people. However, in the current stack of
patches, it is not a simple case of just dropping the configurable patch as it
would cause merge conflicts. This patch backs out the configuration option.
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The standard buddy allocator always favours the smallest block of pages.
The effect of this is that the pages free to satisfy min_free_kbytes tends
to be preserved since boot time at the same location of memory ffor a very
long time and as a contiguous block. When an administrator sets the
reserve at 16384 at boot time, it tends to be the same MAX_ORDER blocks
that remain free. This allows the occasional high atomic allocation to
succeed up until the point the blocks are split. In practice, it is
difficult to split these blocks but when they do split, the benefit of
having min_free_kbytes for contiguous blocks disappears. Additionally,
increasing min_free_kbytes once the system has been running for some time
has no guarantee of creating contiguous blocks.
On the other hand, CONFIG_PAGE_GROUP_BY_MOBILITY favours splitting large
blocks when there are no free pages of the appropriate type available. A
side-effect of this is that all blocks in memory tends to be used up and
the contiguous free blocks from boot time are not preserved like in the
vanilla allocator. This can cause a problem if a new caller is unwilling
to reclaim or does not reclaim for long enough.
A failure scenario was found for a wireless network device allocating
order-1 atomic allocations but the allocations were not intense or frequent
enough for a whole block of pages to be preserved for MIGRATE_HIGHALLOC.
This was reproduced on a desktop by booting with mem=256mb, forcing the
driver to allocate at order-1, running a bittorrent client (downloading a
debian ISO) and building a kernel with -j2.
This patch addresses the problem on the desktop machine booted with
mem=256mb. It works by setting aside a reserve of MAX_ORDER_NR_PAGES
blocks, the number of which depends on the value of min_free_kbytes. These
blocks are only fallen back to when there is no other free pages. Then the
smallest possible page is used just like the normal buddy allocator instead
of the largest possible page to preserve contiguous pages The pages in free
lists in the reserve blocks are never taken for another migrate type. The
results is that even if min_free_kbytes is set to a low value, contiguous
blocks will be preserved in the MIGRATE_RESERVE blocks.
This works better than the vanilla allocator because if min_free_kbytes is
increased, a new reserve block will be chosen based on the location of
reclaimable pages and the block will free up as contiguous pages. In the
vanilla allocator, no effort is made to target a block of pages to free as
contiguous pages and min_free_kbytes pages are scattered randomly.
This effect has been observed on the test machine. min_free_kbytes was set
initially low but it was kept as a contiguous free block within
MIGRATE_RESERVE. min_free_kbytes was then set to a higher value and over a
period of time, the free blocks were within the reserve and coalescing.
How long it takes to free up depends on how quickly LRU is rotating.
Amusingly, this means that more activity will free the blocks faster.
This mechanism potentially replaces MIGRATE_HIGHALLOC as it may be more
effective than grouping contiguous free pages together. It all depends on
whether the number of active atomic high allocations exceeds
min_free_kbytes or not. If the number of active allocations exceeds
min_free_kbytes, it's worth it but maybe in that situation, min_free_kbytes
should be set higher. Once there are no more reports of allocation
failures, a patch will be submitted that backs out MIGRATE_HIGHALLOC and
see if the reports stay missing.
Credit to Mariusz Kozlowski for discovering the problem, describing the
failure scenario and testing patches and scenarios.
[akpm@linux-foundation.org: cleanups]
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are problems in the use of SPARSEMEM and pageblock flags that causes
problems on ia64.
The first part of the problem is that units are incorrect in
SECTION_BLOCKFLAGS_BITS computation. This results in a map_section's
section_mem_map being treated as part of a bitmap which isn't good. This
was evident with an invalid virtual address when mem_init attempted to free
bootmem pages while relinquishing control from the bootmem allocator.
The second part of the problem occurs because the pageblock flags bitmap is
be located with the mem_section. The SECTIONS_PER_ROOT computation using
sizeof (mem_section) may not be a power of 2 depending on the size of the
bitmap. This renders masks and other such things not power of 2 base.
This issue was seen with SPARSEMEM_EXTREME on ia64. This patch moves the
bitmap outside of mem_section and uses a pointer instead in the
mem_section. The bitmaps are allocated when the section is being
initialised.
Note that sparse_early_usemap_alloc() does not use alloc_remap() like
sparse_early_mem_map_alloc(). The allocation required for the bitmap on
x86, the only architecture that uses alloc_remap is typically smaller than
a cache line. alloc_remap() pads out allocations to the cache size which
would be a needless waste.
Credit to Bob Picco for identifying the original problem and effecting a
fix for the SECTION_BLOCKFLAGS_BITS calculation. Credit to Andy Whitcroft
for devising the best way of allocating the bitmaps only when required for
the section.
[wli@holomorphy.com: warning fix]
Signed-off-by: Bob Picco <bob.picco@hp.com>
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: William Irwin <bill.irwin@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
MIGRATE_RECLAIMABLE allocations tend to be very bursty in nature like when
updatedb starts. It is likely this will occur in situations where MAX_ORDER
blocks of pages are not free. This means that updatedb can scatter
MIGRATE_RECLAIMABLE pages throughout the address space. This patch is more
agressive about stealing blocks of pages for MIGRATE_RECLAIMABLE.
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch chooses blocks with lower PFNs when placing kernel allocations.
This is particularly important during fallback in low memory situations to
stop unmovable pages being placed throughout the entire address space.
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Grouping pages by mobility can only successfully operate when there are more
MAX_ORDER_NR_PAGES areas than mobility types. When there are insufficient
areas, fallbacks cannot be avoided. This has noticeable performance impacts
on machines with small amounts of memory in comparison to MAX_ORDER_NR_PAGES.
For example, on IA64 with a configuration including huge pages spans 1GiB with
MAX_ORDER_NR_PAGES so would need at least 4GiB of RAM before grouping pages by
mobility would be useful. In comparison, an x86 would need 16MB.
This patch checks the size of vm_total_pages in build_all_zonelists(). If
there are not enough areas, mobility is effectivly disabled by considering
all allocations as the same type (UNMOVABLE). This is achived via a
__read_mostly flag.
With this patch, performance is comparable to disabling grouping pages
by mobility at compile-time on a test machine with insufficient memory.
With this patch, it is reasonable to get rid of grouping pages by mobility
a compile-time option.
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In rare cases, the kernel needs to allocate a high-order block of pages
without sleeping. For example, this is the case with e1000 cards configured
to use jumbo frames. Migrating or reclaiming pages in this situation is not
an option.
This patch groups these allocations together as much as possible by adding a
new MIGRATE_TYPE. The MIGRATE_HIGHATOMIC type are exactly what they sound
like. Care is taken that pages of other migrate types do not use the same
blocks as high-order atomic allocations.
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch marks a number of allocations that are either short-lived such as
network buffers or are reclaimable such as inode allocations. When something
like updatedb is called, long-lived and unmovable kernel allocations tend to
be spread throughout the address space which increases fragmentation.
This patch groups these allocations together as much as possible by adding a
new MIGRATE_TYPE. The MIGRATE_RECLAIMABLE type is for allocations that can be
reclaimed on demand, but not moved. i.e. they can be migrated by deleting
them and re-reading the information from elsewhere.
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When a fallback occurs, there will be free pages for one allocation type
stored on the list for another. When a large steal occurs, this patch will
move all the free pages within one list to the other.
[y-goto@jp.fujitsu.com: fix BUG_ON check at move_freepages()]
[apw@shadowen.org: Move to using pfn_valid_within()]
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Cc: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andy Whitcroft <andyw@uk.ibm.com>
Cc: Bob Picco <bob.picco@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Per-cpu pages can accidentally cause fragmentation because they are free, but
pinned pages in an otherwise contiguous block. When this patch is applied,
the per-cpu caches are drained after the direct-reclaim is entered if the
requested order is greater than 0. It simply reuses the code used by suspend
and hotplug.
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The grouping mechanism has some memory overhead and a more complex allocation
path. This patch allows the strategy to be disabled for small memory systems
or if it is known the workload is suffering because of the strategy. It also
acts to show where the page groupings strategy interacts with the standard
buddy allocator.
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Joel Schopp <jschopp@austin.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The freelists for each migrate type can slowly become polluted due to the
per-cpu list. Consider what happens when the following happens
1. A 2^(MAX_ORDER-1) list is reserved for __GFP_MOVABLE pages
2. An order-0 page is allocated from the newly reserved block
3. The page is freed and placed on the per-cpu list
4. alloc_page() is called with GFP_KERNEL as the gfp_mask
5. The per-cpu list is used to satisfy the allocation
This results in a kernel page is in the middle of a migratable region. This
patch prevents this leak occuring by storing the MIGRATE_ type of the page in
page->private. On allocate, a page will only be returned of the desired type,
else more pages will be allocated. This may temporarily allow a per-cpu list
to go over the pcp->high limit but it'll be corrected on the next free. Care
is taken to preserve the hotness of pages recently freed.
The additional code is not measurably slower for the workloads we've tested.
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch adds the core of the fragmentation reduction strategy. It works by
grouping pages together based on their ability to migrate or be reclaimed.
Basically, it works by breaking the list in zone->free_area list into
MIGRATE_TYPES number of lists.
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Here is the latest revision of the anti-fragmentation patches. Of particular
note in this version is special treatment of high-order atomic allocations.
Care is taken to group them together and avoid grouping pages of other types
near them. Artifical tests imply that it works. I'm trying to get the
hardware together that would allow setting up of a "real" test. If anyone
already has a setup and test that can trigger the atomic-allocation problem,
I'd appreciate a test of these patches and a report. The second major change
is that these patches will apply cleanly with patches that implement
anti-fragmentation through zones.
kernbench shows effectively no performance difference varying between -0.2%
and +2% on a variety of test machines. Success rates for huge page allocation
are dramatically increased. For example, on a ppc64 machine, the vanilla
kernel was only able to allocate 1% of memory as a hugepage and this was due
to a single hugepage reserved as min_free_kbytes. With these patches applied,
17% was allocatable as superpages. With reclaim-related fixes from Andy
Whitcroft, it was 40% and further reclaim-related improvements should increase
this further.
Changelog Since V28
o Group high-order atomic allocations together
o It is no longer required to set min_free_kbytes to 10% of memory. A value
of 16384 in most cases will be sufficient
o Now applied with zone-based anti-fragmentation
o Fix incorrect VM_BUG_ON within buffered_rmqueue()
o Reorder the stack so later patches do not back out work from earlier patches
o Fix bug were journal pages were being treated as movable
o Bias placement of non-movable pages to lower PFNs
o More agressive clustering of reclaimable pages in reactions to workloads
like updatedb that flood the size of inode caches
Changelog Since V27
o Renamed anti-fragmentation to Page Clustering. Anti-fragmentation was giving
the mistaken impression that it was the 100% solution for high order
allocations. Instead, it greatly increases the chances high-order
allocations will succeed and lays the foundation for defragmentation and
memory hot-remove to work properly
o Redefine page groupings based on ability to migrate or reclaim instead of
basing on reclaimability alone
o Get rid of spurious inits
o Per-cpu lists are no longer split up per-type. Instead the per-cpu list is
searched for a page of the appropriate type
o Added more explanation commentary
o Fix up bug in pageblock code where bitmap was used before being initalised
Changelog Since V26
o Fix double init of lists in setup_pageset
Changelog Since V25
o Fix loop order of for_each_rclmtype_order so that order of loop matches args
o gfpflags_to_rclmtype uses gfp_t instead of unsigned long
o Rename get_pageblock_type() to get_page_rclmtype()
o Fix alignment problem in move_freepages()
o Add mechanism for assigning flags to blocks of pages instead of page->flags
o On fallback, do not examine the preferred list of free pages a second time
The purpose of these patches is to reduce external fragmentation by grouping
pages of related types together. When pages are migrated (or reclaimed under
memory pressure), large contiguous pages will be freed.
This patch works by categorising allocations by their ability to migrate;
Movable - The pages may be moved with the page migration mechanism. These are
generally userspace pages.
Reclaimable - These are allocations for some kernel caches that are
reclaimable or allocations that are known to be very short-lived.
Unmovable - These are pages that are allocated by the kernel that
are not trivially reclaimed. For example, the memory allocated for a
loaded module would be in this category. By default, allocations are
considered to be of this type
HighAtomic - These are high-order allocations belonging to callers that
cannot sleep or perform any IO. In practice, this is restricted to
jumbo frame allocation for network receive. It is assumed that the
allocations are short-lived
Instead of having one MAX_ORDER-sized array of free lists in struct free_area,
there is one for each type of reclaimability. Once a 2^MAX_ORDER block of
pages is split for a type of allocation, it is added to the free-lists for
that type, in effect reserving it. Hence, over time, pages of the different
types can be clustered together.
When the preferred freelists are expired, the largest possible block is taken
from an alternative list. Buddies that are split from that large block are
placed on the preferred allocation-type freelists to mitigate fragmentation.
This implementation gives best-effort for low fragmentation in all zones.
Ideally, min_free_kbytes needs to be set to a value equal to 4 * (1 <<
(MAX_ORDER-1)) pages in most cases. This would be 16384 on x86 and x86_64 for
example.
Our tests show that about 60-70% of physical memory can be allocated on a
desktop after a few days uptime. In benchmarks and stress tests, we are
finding that 80% of memory is available as contiguous blocks at the end of the
test. To compare, a standard kernel was getting < 1% of memory as large pages
on a desktop and about 8-12% of memory as large pages at the end of stress
tests.
Following this email are 12 patches that implement thie page grouping feature.
The first patch introduces a mechanism for storing flags related to a whole
block of pages. Then allocations are split between movable and all other
allocations. Following that are patches to deal with per-cpu pages and make
the mechanism configurable. The next patch moves free pages between lists
when partially allocated blocks are used for pages of another migrate type.
The second last patch groups reclaimable kernel allocations such as inode
caches together. The final patch related to groupings keeps high-order atomic
allocations.
The last two patches are more concerned with control of fragmentation. The
second last patch biases placement of non-movable allocations towards the
start of memory. This is with a view of supporting memory hot-remove of DIMMs
with higher PFNs in the future. The biasing could be enforced a lot heavier
but it would cost. The last patch agressively clusters reclaimable pages like
inode caches together.
The fragmentation reduction strategy needs to track if pages within a block
can be moved or reclaimed so that pages are freed to the appropriate list.
This patch adds a bitmap for flags affecting a whole a MAX_ORDER block of
pages.
In non-SPARSEMEM configurations, the bitmap is stored in the struct zone and
allocated during initialisation. SPARSEMEM statically allocates the bitmap in
a struct mem_section so that bitmaps do not have to be resized during memory
hotadd. This wastes a small amount of memory per unused section (usually
sizeof(unsigned long)) but the complexity of dynamically allocating the memory
is quite high.
Additional credit to Andy Whitcroft who reviewed up an earlier implementation
of the mechanism an suggested how to make it a *lot* cleaner.
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Current ia64 kernel flushes icache by lazy_mmu_prot_update() *after*
set_pte(). This is too late. This patch removes lazy_mmu_prot_update and
add modfied set_pte() for flushing if necessary.
This patch flush icache of a page when
new pte has exec bit.
&& new pte has present bit
&& new pte is user's page.
&& (old *ptep is not present
|| new pte's pfn is not same to old *ptep's ptn)
&& new pte's page has no Pg_arch_1 bit.
Pg_arch_1 is set when a page is cache consistent.
I think this condition checks are much easier to understand than considering
"Where sync_icache_dcache() should be inserted ?".
pte_user() for ia64 was removed by http://lkml.org/lkml/2007/6/12/67 as
clean-up. So, I added it again.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In migration, a new page should be cache flushed before set_pte() in some
archs which have virtually-tagged cache.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Swappiness isn't a safe sysctl. Setting it to 0 for example can hang a
system. That's a corner case but even setting it to 10 or lower can waste
enormous amounts of cpu without making much progress. We've customers who
wants to use swappiness but they can't because of the current
implementation (if you change it so the system stops swapping it really
stops swapping and nothing works sane anymore if you really had to swap
something to make progress).
This patch from Kurt Garloff makes swappiness safer to use (no more huge
cpu usage or hangs with low swappiness values).
I think the prev_priority can also be nuked since it wastes 4 bytes per
zone (that would be an incremental patch but I wait the nr_scan_[in]active
to be nuked first for similar reasons). Clearly somebody at some point
noticed how broken that thing was and they had to add min(priority,
prev_priority) to give it some reliability, but they didn't go the last
mile to nuke prev_priority too. Calculating distress only in function of
not-racy priority is correct and sure more than enough without having to
add randomness into the equation.
Patch is tested on older kernels but it compiles and it's quite simple
so...
Overall I'm not very satisified by the swappiness tweak, since it doesn't
rally do anything with the dirty pagecache that may be inactive. We need
another kind of tweak that controls the inactive scan and tunes the
can_writepage feature (not yet in mainline despite having submitted it a
few times), not only the active one. That new tweak will tell the kernel
how hard to scan the inactive list for pure clean pagecache (something the
mainline kernel isn't capable of yet). We already have that feature
working in all our enterprise kernels with the default reasonable tune, or
they can't even run a readonly backup with tar without triggering huge
write I/O. I think it should be available also in mainline later.
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Kurt Garloff <garloff@suse.de>
Signed-off-by: Andrea Arcangeli <andrea@suse.de>
Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The function of GFP_LEVEL_MASK seems to be unclear. In order to clear up
the mystery we get rid of it and replace GFP_LEVEL_MASK with 3 sets of GFP
flags:
GFP_RECLAIM_MASK Flags used to control page allocator reclaim behavior.
GFP_CONSTRAINT_MASK Flags used to limit where allocations can occur.
GFP_SLAB_BUG_MASK Flags that the slab allocator BUG()s on.
These replace the uses of GFP_LEVEL mask in the slab allocators and in
vmalloc.c.
The use of the flags not included in these sets may occur as a result of a
slab allocation standing in for a page allocation when constructing scatter
gather lists. Extraneous flags are cleared and not passed through to the
page allocator. __GFP_MOVABLE/RECLAIMABLE, __GFP_COLD and __GFP_COMP will
now be ignored if passed to a slab allocator.
Change the allocation of allocator meta data in SLAB and vmalloc to not
pass through flags listed in GFP_CONSTRAINT_MASK. SLAB already removes the
__GFP_THISNODE flag for such allocations. Generalize that to also cover
vmalloc. The use of GFP_CONSTRAINT_MASK also includes __GFP_HARDWALL.
The impact of allocator metadata placement on access latency to the
cachelines of the object itself is minimal since metadata is only
referenced on alloc and free. The attempt is still made to place the meta
data optimally but we consistently allow fallback both in SLAB and vmalloc
(SLUB does not need to allocate metadata like that).
Allocator metadata may serve multiple in kernel users and thus should not
be subject to the limitations arising from a single allocation context.
[akpm@linux-foundation.org: fix fallback_alloc()]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When a cpu is onlined on memory-less-node box, kernel panics due to touch
NULL pointer of pgdat->kswapd. Current kswapd runs only nodes which have
memory. So, calling of set_cpus_allowed() is not necessary for memory-less
node.
This is fix for it.
Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Here's a cut at fixing up uses of the online node map in generic code.
mm/shmem.c:shmem_parse_mpol()
Ensure nodelist is subset of nodes with memory.
Use node_states[N_HIGH_MEMORY] as default for missing
nodelist for interleave policy.
mm/shmem.c:shmem_fill_super()
initialize policy_nodes to node_states[N_HIGH_MEMORY]
mm/page-writeback.c:highmem_dirtyable_memory()
sum over nodes with memory
mm/page_alloc.c:zlc_setup()
allowednodes - use nodes with memory.
mm/page_alloc.c:default_zonelist_order()
average over nodes with memory.
mm/page_alloc.c:find_next_best_node()
skip nodes w/o memory.
N_HIGH_MEMORY state mask may not be initialized at this time,
unless we want to depend on early_calculate_totalpages() [see
below]. Will ZONE_MOVABLE ever be configurable?
mm/page_alloc.c:find_zone_movable_pfns_for_nodes()
spread kernelcore over nodes with memory.
This required calling early_calculate_totalpages()
unconditionally, and populating N_HIGH_MEMORY node
state therein from nodes in the early_node_map[].
If we can depend on this, we can eliminate the
population of N_HIGH_MEMORY mask from __build_all_zonelists()
and use the N_HIGH_MEMORY mask in find_next_best_node().
mm/mempolicy.c:mpol_check_policy()
Ensure nodes specified for policy are subset of
nodes with memory.
[akpm@linux-foundation.org: fix warnings]
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: Christoph Lameter <clameter@sgi.com>
Cc: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
GFP_THISNODE checks that the zone selected is within the pgdat (node) of the
first zone of a nodelist. That only works if the node has memory. A
memoryless node will have its first node on another pgdat (node).
GFP_THISNODE currently will return simply memory on the first pgdat. Thus it
is returning memory on other nodes. GFP_THISNODE should fail if there is no
local memory on a node.
Add a new set of zonelists for each node that only contain the nodes that
belong to the zones itself so that no fallback is possible.
Then modify gfp_type to pickup the right zone based on the presence of
__GFP_THISNODE.
Drop the existing GFP_THISNODE checks from the page_allocators hot path.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Acked-by: Nishanth Aravamudan <nacc@us.ibm.com>
Tested-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: Bob Picco <bob.picco@hp.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@skynet.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
get_pfn_range_for_nid() is called multiple times for each node at boot time.
Each time, it will warn about nodes with no memory, resulting in boot messages
like:
Node 0 active with no memory
Node 0 active with no memory
Node 0 active with no memory
Node 0 active with no memory
Node 0 active with no memory
Node 0 active with no memory
On node 0 totalpages: 0
Node 0 active with no memory
Node 0 active with no memory
DMA zone: 0 pages used for memmap
Node 0 active with no memory
Node 0 active with no memory
Normal zone: 0 pages used for memmap
Node 0 active with no memory
Node 0 active with no memory
Movable zone: 0 pages used for memmap
and so on for each memoryless node.
We already have the "On node N totalpages: ..." and other related messages, so
drop the "Node N active with no memory" warnings.
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Bob Picco <bob.picco@hp.com>
Cc: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@skynet.ie>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We need the check for a node with cpu in zone reclaim. Zone reclaim will not
allow remote zone reclaim if a node has a cpu.
[Lee.Schermerhorn@hp.com: Move setup of N_CPU node state mask]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Tested-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: Bob Picco <bob.picco@hp.com>
Cc: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@skynet.ie>
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Online nodes now may have no memory. The checks and initialization must
therefore be changed to no longer use the online functions.
This will correctly initialize the interleave on bootup to only target nodes
with memory and will make sys_move_pages return an error when a page is to be
moved to a memoryless node. Similarly we will get an error if MPOL_BIND and
MPOL_INTERLEAVE is used on a memoryless node.
These are somewhat new semantics. So far one could specify memoryless nodes
and we would maybe do the right thing and just ignore the node (or we'd do
something strange like with MPOL_INTERLEAVE). If we want to allow the
specification of memoryless nodes via memory policies then we need to keep
checking for online nodes.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Acked-by: Nishanth Aravamudan <nacc@us.ibm.com>
Tested-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: Bob Picco <bob.picco@hp.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@skynet.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Simply switch all for_each_online_node to for_each_node_state(NORMAL_MEMORY).
That way SLUB only operates on nodes with regular memory. Any allocation
attempt on a memoryless node or a node with just highmem will fall whereupon
SLUB will fetch memory from a nearby node (depending on how memory policies
and cpuset describe fallback).
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Tested-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: Bob Picco <bob.picco@hp.com>
Cc: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@skynet.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Slab should not allocate control structures for nodes without memory. This
may seem to work right now but its unreliable since not all allocations can
fall back due to the use of GFP_THISNODE.
Switching a few for_each_online_node's to N_NORMAL_MEMORY will allow us to
only allocate for nodes that have regular memory.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Acked-by: Nishanth Aravamudan <nacc@us.ibm.com>
Acked-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: Bob Picco <bob.picco@hp.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@skynet.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A node without memory does not need a kswapd. So use the memory map instead
of the online map when starting kswapd.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Acked-by: Nishanth Aravamudan <nacc@us.ibm.com>
Tested-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: Bob Picco <bob.picco@hp.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@skynet.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
constrained_alloc() builds its own memory map for nodes with memory. We have
that available in N_HIGH_MEMORY now. So simplify the code.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Acked-by: Nishanth Aravamudan <nacc@us.ibm.com>
Acked-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: Bob Picco <bob.picco@hp.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@skynet.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
MPOL_INTERLEAVE currently simply loops over all nodes. Allocations on
memoryless nodes will be redirected to nodes with memory. This results in an
imbalance because the neighboring nodes to memoryless nodes will get
significantly more interleave hits that the rest of the nodes on the system.
We can avoid this imbalance by clearing the nodes in the interleave node set
that have no memory. If we use the node map of the memory nodes instead of
the online nodes then we have only the nodes we want.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Tested-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: Bob Picco <bob.picco@hp.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@skynet.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It is necessary to know if nodes have memory since we have recently begun to
add support for memoryless nodes. For that purpose we introduce a two new
node states: N_HIGH_MEMORY and N_NORMAL_MEMORY.
A node has its bit in N_HIGH_MEMORY set if it has any memory regardless of the
type of mmemory. If a node has memory then it has at least one zone defined
in its pgdat structure that is located in the pgdat itself.
A node has its bit in N_NORMAL_MEMORY set if it has a lower zone than
ZONE_HIGHMEM. This means it is possible to allocate memory that is not
subject to kmap.
N_HIGH_MEMORY and N_NORMAL_MEMORY can then be used in various places to insure
that we do the right thing when we encounter a memoryless node.
[akpm@linux-foundation.org: build fix]
[Lee.Schermerhorn@hp.com: update N_HIGH_MEMORY node state for memory hotadd]
[y-goto@jp.fujitsu.com: Fix memory hotplug + sparsemem build]
Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Acked-by: Bob Picco <bob.picco@hp.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@skynet.ie>
Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Why do we need to support memoryless nodes?
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> wrote:
> For fujitsu, problem is called "empty" node.
>
> When ACPI's SRAT table includes "possible nodes", ia64 bootstrap(acpi_numa_init)
> creates nodes, which includes no memory, no cpu.
>
> I tried to remove empty-node in past, but that was denied.
> It was because we can hot-add cpu to the empty node.
> (node-hotplug triggered by cpu is not implemented now. and it will be ugly.)
>
>
> For HP, (Lee can comment on this later), they have memory-less-node.
> As far as I hear, HP's machine can have following configration.
>
> (example)
> Node0: CPU0 memory AAA MB
> Node1: CPU1 memory AAA MB
> Node2: CPU2 memory AAA MB
> Node3: CPU3 memory AAA MB
> Node4: Memory XXX GB
>
> AAA is very small value (below 16MB) and will be omitted by ia64 bootstrap.
> After boot, only Node 4 has valid memory (but have no cpu.)
>
> Maybe this is memory-interleave by firmware config.
Christoph Lameter <clameter@sgi.com> wrote:
> Future SGI platforms (actually also current one can have but nothing like
> that is deployed to my knowledge) have nodes with only cpus. Current SGI
> platforms have nodes with just I/O that we so far cannot manage in the
> core. So the arch code maps them to the nearest memory node.
Lee Schermerhorn <Lee.Schermerhorn@hp.com> wrote:
> For the HP platforms, we can configure each cell with from 0% to 100%
> "cell local memory". When we configure with <100% CLM, the "missing
> percentages" are interleaved by hardware on a cache-line granularity to
> improve bandwidth at the expense of latency for numa-challenged
> applications [and OSes, but not our problem ;-)]. When we boot Linux on
> such a config, all of the real nodes have no memory--it all resides in a
> single interleaved pseudo-node.
>
> When we boot Linux on a 100% CLM configuration [== NUMA], we still have
> the interleaved pseudo-node. It contains a few hundred MB stolen from
> the real nodes to contain the DMA zone. [Interleaved memory resides at
> phys addr 0]. The memoryless-nodes patches, along with the zoneorder
> patches, support this config as well.
>
> Also, when we boot a NUMA config with the "mem=" command line,
> specifying less memory than actually exists, Linux takes the excluded
> memory "off the top" rather than distributing it across the nodes. This
> can result in memoryless nodes, as well.
>
This patch:
Preparation for memoryless node patches.
Provide a generic way to keep nodemasks describing various characteristics of
NUMA nodes.
Remove the node_online_map and the node_possible map and realize the same
functionality using two nodes stats: N_POSSIBLE and N_ONLINE.
[Lee.Schermerhorn@hp.com: Initialize N_*_MEMORY and N_CPU masks for non-NUMA config]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Tested-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: Bob Picco <bob.picco@hp.com>
Cc: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@skynet.ie>
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
prepare/commit_write no longer returns AOP_TRUNCATED_PAGE since OCFS2 and
GFS2 were converted to the new aops, so we can make some simplifications
for that.
[michal.k.k.piotrowski@gmail.com: fix warning]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rework the generic block "cont" routines to handle the new aops. Supporting
cont_prepare_write would take quite a lot of code to support, so remove it
instead (and we later convert all filesystems to use it).
write_begin gets passed AOP_FLAG_CONT_EXPAND when called from
generic_cont_expand, so filesystems can avoid the old hacks they used.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Implement new aops for some of the simpler filesystems.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Restore the KERNEL_DS optimisation, especially helpful to the 2copy write
path.
This may be a pretty questionable gain in most cases, especially after the
legacy 2copy write path is removed, but it doesn't cost much.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
These are intended to replace prepare_write and commit_write with more
flexible alternatives that are also able to avoid the buffered write
deadlock problems efficiently (which prepare_write is unable to do).
[mark.fasheh@oracle.com: API design contributions, code review and fixes]
[akpm@linux-foundation.org: various fixes]
[dmonakhov@sw.ru: new aop block_write_begin fix]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Signed-off-by: Dmitriy Monakhov <dmonakhov@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add an iterator data structure to operate over an iovec. Add usercopy
operators needed by generic_file_buffered_write, and convert that function
over.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Modify the core write() code so that it won't take a pagefault while holding a
lock on the pagecache page. There are a number of different deadlocks possible
if we try to do such a thing:
1. generic_buffered_write
2. lock_page
3. prepare_write
4. unlock_page+vmtruncate
5. copy_from_user
6. mmap_sem(r)
7. handle_mm_fault
8. lock_page (filemap_nopage)
9. commit_write
10. unlock_page
a. sys_munmap / sys_mlock / others
b. mmap_sem(w)
c. make_pages_present
d. get_user_pages
e. handle_mm_fault
f. lock_page (filemap_nopage)
2,8 - recursive deadlock if page is same
2,8;2,8 - ABBA deadlock is page is different
2,6;b,f - ABBA deadlock if page is same
The solution is as follows:
1. If we find the destination page is uptodate, continue as normal, but use
atomic usercopies which do not take pagefaults and do not zero the uncopied
tail of the destination. The destination is already uptodate, so we can
commit_write the full length even if there was a partial copy: it does not
matter that the tail was not modified, because if it is dirtied and written
back to disk it will not cause any problems (uptodate *means* that the
destination page is as new or newer than the copy on disk).
1a. The above requires that fault_in_pages_readable correctly returns access
information, because atomic usercopies cannot distinguish between
non-present pages in a readable mapping, from lack of a readable mapping.
2. If we find the destination page is non uptodate, unlock it (this could be
made slightly more optimal), then allocate a temporary page to copy the
source data into. Relock the destination page and continue with the copy.
However, instead of a usercopy (which might take a fault), copy the data
from the pinned temporary page via the kernel address space.
(also, rename maxlen to seglen, because it was confusing)
This increases the CPU/memory copy cost by almost 50% on the affected
workloads. That will be solved by introducing a new set of pagecache write
aops in a subsequent patch.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hide some of the open-coded nr_segs tests into the iovec helpers. This is all
to simplify generic_file_buffered_write, because that gets more complex in the
next patch.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Quite a bit of code is used in maintaining these "cached pages" that are
probably pretty unlikely to get used. It would require a narrow race where
the page is inserted concurrently while this process is allocating a page
in order to create the spare page. Then a multi-page write into an uncached
part of the file, to make use of it.
Next, the buffered write path (and others) uses its own LRU pagevec when it
should be just using the per-CPU LRU pagevec (which will cut down on both data
and code size cacheline footprint). Also, these private LRU pagevecs are
emptied after just a very short time, in contrast with the per-CPU pagevecs
that are persistent. Net result: 7.3 times fewer lru_lock acquisitions required
to add the pages to pagecache for a bulk write (in 4K chunks).
[this gets rid of some cond_resched() calls in readahead.c and mpage.c due
to clashes in -mm. What put them there, and why? ]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If prepare_write fails with AOP_TRUNCATED_PAGE, or if commit_write fails, then
we may have failed the write operation despite prepare_write having
instantiated blocks past i_size. Fix this, and consolidate the trimming into
one place.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Allow CONFIG_DEBUG_VM to switch off the prefaulting logic, to simulate the
Makes the race much easier to hit.
This is useful for demonstration and testing purposes, but is removed in a
subsequent patch.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rename some variables and fix some types.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit 6527c2bdf1, which
fixed the following bug:
When prefaulting in the pages in generic_file_buffered_write(), we only
faulted in the pages for the firts segment of the iovec. If the second of
successive segment described a mmapping of the page into which we're
write()ing, and that page is not up-to-date, the fault handler tries to lock
the already-locked page (to bring it up to date) and deadlocks.
An exploit for this bug is in writev-deadlock-demo.c, in
http://www.zip.com.au/~akpm/linux/patches/stuff/ext3-tools.tar.gz.
(These demos assume blocksize < PAGE_CACHE_SIZE).
The problem with this fix is that it takes the kernel back to doing a single
prepare_write()/commit_write() per iovec segment. So in the worst case we'll
run prepare_write+commit_write 1024 times where we previously would have run
it once. The other problem with the fix is that it fix all the locking problems.
<insert numbers obtained via ext3-tools's writev-speed.c here>
And apparently this change killed NFS overwrite performance, because, I
suppose, it talks to the server for each prepare_write+commit_write.
So just back that patch out - we'll be fixing the deadlock by other means.
Nick says: also it only ever actually papered over the bug, because after
faulting in the pages, they might be unmapped or reclaimed.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit 81b0c87133, which was
a bugfix against 6527c2bdf1 ("[PATCH]
generic_file_buffered_write(): deadlock on vectored write"), which we
also revert.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Revert the patch from Neil Brown to optimise NFSD writev handling.
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
While running some memory intensive load, system response deteriorated just
after swap-out started.
The cause of this problem is that when a PG_reclaim page is moved to the tail
of the inactive LRU list in rotate_reclaimable_page(), lru_lock spin lock is
acquired every page writeback . This deteriorates system performance and
makes interrupt hold off time longer when swap-out started.
Following patch solves this problem. I use pagevec in rotating reclaimable
pages to mitigate LRU spin lock contention and reduce interrupt hold off time.
I did a test that allocating and touching pages in multiple processes, and
pinging to the test machine in flooding mode to measure response under memory
intensive load.
The test result is:
-2.6.23-rc5
--- testmachine ping statistics ---
3000 packets transmitted, 3000 received, 0% packet loss, time 53222ms
rtt min/avg/max/mdev = 0.074/0.652/172.228/7.176 ms, pipe 11, ipg/ewma
17.746/0.092 ms
-2.6.23-rc5-patched
--- testmachine ping statistics ---
3000 packets transmitted, 3000 received, 0% packet loss, time 51924ms
rtt min/avg/max/mdev = 0.072/0.108/3.884/0.114 ms, pipe 2, ipg/ewma
17.314/0.091 ms
Max round-trip-time was improved.
The test machine spec is that 4CPU(3.16GHz, Hyper-threading enabled)
8GB memory , 8GB swap.
I did ping test again to observe performance deterioration caused by taking
a ref.
-2.6.23-rc6-with-modifiedpatch
--- testmachine ping statistics ---
3000 packets transmitted, 3000 received, 0% packet loss, time 53386ms
rtt min/avg/max/mdev = 0.074/0.110/4.716/0.147 ms, pipe 2, ipg/ewma 17.801/0.129 ms
The result for my original patch is as follows.
-2.6.23-rc5-with-originalpatch
--- testmachine ping statistics ---
3000 packets transmitted, 3000 received, 0% packet loss, time 51924ms
rtt min/avg/max/mdev = 0.072/0.108/3.884/0.114 ms, pipe 2, ipg/ewma 17.314/0.091 ms
The influence to response was small.
[akpm@linux-foundation.org: fix uninitalised var warning]
[hugh@veritas.com: fix locking]
[randy.dunlap@oracle.com: fix function declaration]
[hugh@veritas.com: fix BUG at include/linux/mm.h:220!]
[hugh@veritas.com: kill redundancy in rotate_reclaimable_page]
[hugh@veritas.com: move_tail_pages into lru_add_drain]
Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Allow an application to query the memories allowed by its context.
Updated numa_memory_policy.txt to mention that applications can use this to
obtain allowed memories for constructing valid policies.
TODO: update out-of-tree libnuma wrapper[s], or maybe add a new
wrapper--e.g., numa_get_mems_allowed() ?
Also, update numa syscall man pages.
Tested with memtoy V>=0.13.
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: Christoph Lameter <clameter@sgi.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The current VM can get itself into trouble fairly easily on systems with a
small ZONE_HIGHMEM, which is common on i686 computers with 1GB of memory.
On one side, page_alloc() will allocate down to zone->pages_low, while on
the other side, kswapd() and balance_pgdat() will try to free memory from
every zone, until every zone has more free pages than zone->pages_high.
Highmem can be filled up to zone->pages_low with page tables, ramfs,
vmalloc allocations and other unswappable things quite easily and without
many bad side effects, since we still have a huge ZONE_NORMAL to do future
allocations from.
However, as long as the number of free pages in the highmem zone is below
zone->pages_high, kswapd will continue swapping things out from
ZONE_NORMAL, too!
Sami Farin managed to get his system into a stage where kswapd had freed
about 700MB of low memory and was still "going strong".
The attached patch will make kswapd stop paging out data from zones when
there is more than enough memory free. We do go above zone->pages_high in
order to keep pressure between zones equal in normal circumstances, but the
patch should prevent the kind of excesses that made Sami's computer totally
unusable.
Signed-off-by: Rik van Riel <riel@redhat.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
vmalloc() returns a void pointer, so there's no need to cast its
return value in mm/page_alloc.c::zone_wait_table_init().
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A NULL pointer means that the object was not allocated. One cannot
determine the size of an object that has not been allocated. Currently we
return 0 but we really should BUG() on attempts to determine the size of
something nonexistent.
krealloc() interprets NULL to mean a zero sized object. Handle that
separately in krealloc().
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The calculation of pgoff in do_linear_fault() should use PAGE_SHIFT and not
PAGE_CACHE_SHIFT since vma->vm_pgoff is in units of PAGE_SIZE and not
PAGE_CACHE_SIZE. At the moment linux/pagemap.h has PAGE_CACHE_SHIFT
defined as PAGE_SHIFT, but should that ever change this calculation would
break.
Signed-off-by: Dean Nelson <dcn@sgi.com>
Acked-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Considering kfree(NULL) would normally occur only in error paths and
kfree(ZERO_SIZE_PTR) is uncommon as well, so let's use unlikely() for the
condition check in SLUB's and SLOB's kfree() to optimize for the common
case. SLAB has this already.
Signed-off-by: Satyam Sharma <satyam@infradead.org>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
__add_to_swap_cache unconditionally sets the page locked, which can be a bit
alarming to the unsuspecting reader: in the code paths where the page is
visible to other CPUs, the page should be (and is) already locked.
Instead, just add a check to ensure the page is locked here, and teach the one
path relying on the old behaviour to call SetPageLocked itself.
[hugh@veritas.com: locking fix]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
