Commit Graph

83 Commits

Author SHA1 Message Date
David Howells
530403d9ba rxrpc: Clean up ACK handling
Clean up the rxrpc_propose_ACK() function.  If deferred PING ACK proposal
is split out, it's only really needed for deferred DELAY ACKs.  All other
ACKs, bar terminal IDLE ACK are sent immediately.  The deferred IDLE ACK
submission can be handled by conversion of a DELAY ACK into an IDLE ACK if
there's nothing to be SACK'd.

Also, because there's a delay between an ACK being generated and being
transmitted, it's possible that other ACKs of the same type will be
generated during that interval.  Apart from the ACK time and the serial
number responded to, most of the ACK body, including window and SACK
parameters, are not filled out till the point of transmission - so we can
avoid generating a new ACK if there's one pending that will cover the SACK
data we need to convey.

Therefore, don't propose a new DELAY or IDLE ACK for a call if there's one
already pending.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
2022-11-08 16:42:28 +00:00
David Howells
72f0c6fb05 rxrpc: Allocate ACK records at proposal and queue for transmission
Allocate rxrpc_txbuf records for ACKs and put onto a queue for the
transmitter thread to dispatch.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
2022-11-08 16:42:28 +00:00
David Howells
ed472b0c87 rxrpc: Call udp_sendmsg() directly
Call udp_sendmsg() and udpv6_sendmsg() directly rather than calling
kernel_sendmsg() as the latter assumes we want a kvec-class iterator.
However, zerocopy explicitly doesn't work with such an iterator.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
2022-11-08 16:42:28 +00:00
David Howells
8889a711f9 rxrpc: Fix ack.bufferSize to be 0 when generating an ack
ack.bufferSize should be set to 0 when generating an ack.

Fixes: 8d94aa381d ("rxrpc: Calls shouldn't hold socket refs")
Reported-by: Jeffrey Altman <jaltman@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
2022-11-08 16:42:15 +00:00
David Howells
f7fa52421f rxrpc: Record stats for why the REQUEST-ACK flag is being set
Record stats for why the REQUEST-ACK flag is being set.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
2022-11-08 16:42:15 +00:00
David Howells
f2a676d100 rxrpc: Record statistics about ACK types
Record statistics about the different types of ACKs that have been
transmitted and received and the number of ACKs that have been filled out
and transmitted or that have been skipped.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
2022-11-08 16:42:15 +00:00
David Howells
b015424695 rxrpc: Add stats procfile and DATA packet stats
Add a procfile, /proc/net/rxrpc/stats, to display some statistics about
what rxrpc has been doing.  Writing a blank line to the stats file will
clear the increment-only counters.  Allocated resource counters don't get
cleared.

Add some counters to count various things about DATA packets, including the
number created, transmitted and retransmitted and the number received, the
number of ACK-requests markings and the number of jumbo packets received.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
2022-11-08 16:42:15 +00:00
David Howells
4d843be56b rxrpc: Trace setting of the request-ack flag
Add a tracepoint to log why the request-ack flag is set on an outgoing DATA
packet, allowing debugging as to why.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
2022-11-08 16:42:15 +00:00
David Howells
9a3dedcf18 rxrpc: Fix decision on when to generate an IDLE ACK
Fix the decision on when to generate an IDLE ACK by keeping a count of the
number of packets we've received, but not yet soft-ACK'd, and the number of
packets we've processed, but not yet hard-ACK'd, rather than trying to keep
track of which DATA sequence numbers correspond to those points.

We then generate an ACK when either counter exceeds 2.  The counters are
both cleared when we transcribe the information into any sort of ACK packet
for transmission.  IDLE and DELAY ACKs are skipped if both counters are 0
(ie. no change).

Fixes: 805b21b929 ("rxrpc: Send an ACK after every few DATA packets we receive")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-22 21:30:53 +01:00
David Howells
81524b6312 rxrpc: Don't let ack.previousPacket regress
The previousPacket field in the rx ACK packet should never go backwards -
it's now the highest DATA sequence number received, not the last on
received (it used to be used for out of sequence detection).

Fixes: 248f219cb8 ("rxrpc: Rewrite the data and ack handling code")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-22 21:30:53 +01:00
David Howells
2c13c05c5f rxrpc: Adjust retransmission backoff
Improve retransmission backoff by only backing off when we retransmit data
packets rather than when we set the lost ack timer.

To this end:

 (1) In rxrpc_resend(), use rxrpc_get_rto_backoff() when setting the
     retransmission timer and only tell it that we are retransmitting if we
     actually have things to retransmit.

     Note that it's possible for the retransmission algorithm to race with
     the processing of a received ACK, so we may see no packets needing
     retransmission.

 (2) In rxrpc_send_data_packet(), don't bump the backoff when setting the
     ack_lost_at timer, as it may then get bumped twice.

With this, when looking at one particular packet, the retransmission
intervals were seen to be 1.5ms, 2ms, 3ms, 5ms, 9ms, 17ms, 33ms, 71ms,
136ms, 264ms, 544ms, 1.088s, 2.1s, 4.2s and 8.3s.

Fixes: c410bf0193 ("rxrpc: Fix the excessive initial retransmission timeout")
Suggested-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/164138117069.2023386.17446904856843997127.stgit@warthog.procyon.org.uk/
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-22 02:03:24 +00:00
David Howells
245500d853 rxrpc: Rewrite the client connection manager
Rewrite the rxrpc client connection manager so that it can support multiple
connections for a given security key to a peer.  The following changes are
made:

 (1) For each open socket, the code currently maintains an rbtree with the
     connections placed into it, keyed by communications parameters.  This
     is tricky to maintain as connections can be culled from the tree or
     replaced within it.  Connections can require replacement for a number
     of reasons, e.g. their IDs span too great a range for the IDR data
     type to represent efficiently, the call ID numbers on that conn would
     overflow or the conn got aborted.

     This is changed so that there's now a connection bundle object placed
     in the tree, keyed on the same parameters.  The bundle, however, does
     not need to be replaced.

 (2) An rxrpc_bundle object can now manage the available channels for a set
     of parallel connections.  The lock that manages this is moved there
     from the rxrpc_connection struct (channel_lock).

 (3) There'a a dummy bundle for all incoming connections to share so that
     they have a channel_lock too.  It might be better to give each
     incoming connection its own bundle.  This bundle is not needed to
     manage which channels incoming calls are made on because that's the
     solely at whim of the client.

 (4) The restrictions on how many client connections are around are
     removed.  Instead, a previous patch limits the number of client calls
     that can be allocated.  Ordinarily, client connections are reaped
     after 2 minutes on the idle queue, but when more than a certain number
     of connections are in existence, the reaper starts reaping them after
     2s of idleness instead to get the numbers back down.

     It could also be made such that new call allocations are forced to
     wait until the number of outstanding connections subsides.

Signed-off-by: David Howells <dhowells@redhat.com>
2020-09-08 21:11:43 +01:00
David Howells
4700c4d80b rxrpc: Fix loss of RTT samples due to interposed ACK
The Rx protocol has a mechanism to help generate RTT samples that works by
a client transmitting a REQUESTED-type ACK when it receives a DATA packet
that has the REQUEST_ACK flag set.

The peer, however, may interpose other ACKs before transmitting the
REQUESTED-ACK, as can be seen in the following trace excerpt:

 rxrpc_tx_data: c=00000044 DATA d0b5ece8:00000001 00000001 q=00000001 fl=07
 rxrpc_rx_ack: c=00000044 00000001 PNG r=00000000 f=00000002 p=00000000 n=0
 rxrpc_rx_ack: c=00000044 00000002 REQ r=00000001 f=00000002 p=00000001 n=0
 ...

DATA packet 1 (q=xx) has REQUEST_ACK set (bit 1 of fl=xx).  The incoming
ping (labelled PNG) hard-acks the request DATA packet (f=xx exceeds the
sequence number of the DATA packet), causing it to be discarded from the Tx
ring.  The ACK that was requested (labelled REQ, r=xx references the serial
of the DATA packet) comes after the ping, but the sk_buff holding the
timestamp has gone and the RTT sample is lost.

This is particularly noticeable on RPC calls used to probe the service
offered by the peer.  A lot of peers end up with an unknown RTT because we
only ever sent a single RPC.  This confuses the server rotation algorithm.

Fix this by caching the information about the outgoing packet in RTT
calculations in the rxrpc_call struct rather than looking in the Tx ring.

A four-deep buffer is maintained and both REQUEST_ACK-flagged DATA and
PING-ACK transmissions are recorded in there.  When the appropriate
response ACK is received, the buffer is checked for a match and, if found,
an RTT sample is recorded.

If a received ACK refers to a packet with a later serial number than an
entry in the cache, that entry is presumed lost and the entry is made
available to record a new transmission.

ACKs types other than REQUESTED-type and PING-type cause any matching
sample to be cancelled as they don't necessarily represent a useful
measurement.

If there's no space in the buffer on ping/data transmission, the sample
base is discarded.

Fixes: 50235c4b5a ("rxrpc: Obtain RTT data by requesting ACKs on DATA packets")
Signed-off-by: David Howells <dhowells@redhat.com>
2020-08-20 17:59:27 +01:00
Christoph Hellwig
2de569bda2 ipv4: add ip_sock_set_mtu_discover
Add a helper to directly set the IP_MTU_DISCOVER sockopt from kernel
space without going through a fake uaccess.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Howells <dhowells@redhat.com> [rxrpc bits]
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28 11:11:45 -07:00
David Howells
c410bf0193 rxrpc: Fix the excessive initial retransmission timeout
rxrpc currently uses a fixed 4s retransmission timeout until the RTT is
sufficiently sampled.  This can cause problems with some fileservers with
calls to the cache manager in the afs filesystem being dropped from the
fileserver because a packet goes missing and the retransmission timeout is
greater than the call expiry timeout.

Fix this by:

 (1) Copying the RTT/RTO calculation code from Linux's TCP implementation
     and altering it to fit rxrpc.

 (2) Altering the various users of the RTT to make use of the new SRTT
     value.

 (3) Replacing the use of rxrpc_resend_timeout to use the calculated RTO
     value instead (which is needed in jiffies), along with a backoff.

Notes:

 (1) rxrpc provides RTT samples by matching the serial numbers on outgoing
     DATA packets that have the RXRPC_REQUEST_ACK set and PING ACK packets
     against the reference serial number in incoming REQUESTED ACK and
     PING-RESPONSE ACK packets.

 (2) Each packet that is transmitted on an rxrpc connection gets a new
     per-connection serial number, even for retransmissions, so an ACK can
     be cross-referenced to a specific trigger packet.  This allows RTT
     information to be drawn from retransmitted DATA packets also.

 (3) rxrpc maintains the RTT/RTO state on the rxrpc_peer record rather than
     on an rxrpc_call because many RPC calls won't live long enough to
     generate more than one sample.

 (4) The calculated SRTT value is in units of 8ths of a microsecond rather
     than nanoseconds.

The (S)RTT and RTO values are displayed in /proc/net/rxrpc/peers.

Fixes: 17926a7932 ([AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both"")
Signed-off-by: David Howells <dhowells@redhat.com>
2020-05-11 16:42:28 +01:00
David Howells
0e631eee17 rxrpc: Fix DATA Tx to disable nofrag for UDP on AF_INET6 socket
Fix the DATA packet transmission to disable nofrag for UDPv4 on an AF_INET6
socket as well as UDPv6 when trying to transmit fragmentably.

Without this, packets filled to the normal size used by the kernel AFS
client of 1412 bytes be rejected by udp_sendmsg() with EMSGSIZE
immediately.  The ->sk_error_report() notification hook is called, but
rxrpc doesn't generate a trace for it.

This is a temporary fix; a more permanent solution needs to involve
changing the size of the packets being filled in accordance with the MTU,
which isn't currently done in AF_RXRPC.  The reason for not doing so was
that, barring the last packet in an rx jumbo packet, jumbos can only be
assembled out of 1412-byte packets - and the plan was to construct jumbos
on the fly at transmission time.

Also, there's no point turning on IPV6_MTU_DISCOVER, since IPv6 has to
engage in this anyway since fragmentation is only done by the sender.  We
can then condense the switch-statement in rxrpc_send_data_packet().

Fixes: 75b54cb57c ("rxrpc: Add IPv6 support")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-14 16:26:47 -07:00
David Howells
5273a191dc rxrpc: Fix NULL pointer deref due to call->conn being cleared on disconnect
When a call is disconnected, the connection pointer from the call is
cleared to make sure it isn't used again and to prevent further attempted
transmission for the call.  Unfortunately, there might be a daemon trying
to use it at the same time to transmit a packet.

Fix this by keeping call->conn set, but setting a flag on the call to
indicate disconnection instead.

Remove also the bits in the transmission functions where the conn pointer is
checked and a ref taken under spinlock as this is now redundant.

Fixes: 8d94aa381d ("rxrpc: Calls shouldn't hold socket refs")
Signed-off-by: David Howells <dhowells@redhat.com>
2020-02-03 10:25:30 +00:00
David Howells
987db9f7cd rxrpc: Use the tx-phase skb flag to simplify tracing
Use the previously-added transmit-phase skbuff private flag to simplify the
socket buffer tracing a bit.  Which phase the skbuff comes from can now be
divined from the skb rather than having to be guessed from the call state.

We can also reduce the number of rxrpc_skb_trace values by eliminating the
difference between Tx and Rx in the symbols.

Signed-off-by: David Howells <dhowells@redhat.com>
2019-08-27 10:04:18 +01:00
David Howells
e8c3af6bb3 rxrpc: Don't bother generating maxSkew in the ACK packet
Don't bother generating maxSkew in the ACK packet as it has been obsolete
since AFS 3.1.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
2019-08-09 15:24:00 +01:00
David Howells
3427beb637 rxrpc: Fix uninitialized error code in rxrpc_send_data_packet()
With gcc 4.1:

    net/rxrpc/output.c: In function ‘rxrpc_send_data_packet’:
    net/rxrpc/output.c:338: warning: ‘ret’ may be used uninitialized in this function

Indeed, if the first jump to the send_fragmentable label is made, and
the address family is not handled in the switch() statement, ret will be
used uninitialized.

Fix this by BUG()'ing as is done in other places in rxrpc where internal
support for future address families will need adding.  It should not be
possible to reach this normally as the address families are checked
up-front.

Fixes: 5a924b8951 ("rxrpc: Don't store the rxrpc header in the Tx queue sk_buffs")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-02 12:09:09 -07:00
Thomas Gleixner
2874c5fd28 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:26:32 -07:00
Arnd Bergmann
526949e877 rxrpc: avoid clang -Wuninitialized warning
clang produces a false-positive warning as it fails to notice
that "lost = true" implies that "ret" is initialized:

net/rxrpc/output.c:402:6: error: variable 'ret' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized]
        if (lost)
            ^~~~
net/rxrpc/output.c:437:6: note: uninitialized use occurs here
        if (ret >= 0) {
            ^~~
net/rxrpc/output.c:402:2: note: remove the 'if' if its condition is always false
        if (lost)
        ^~~~~~~~~
net/rxrpc/output.c:339:9: note: initialize the variable 'ret' to silence this warning
        int ret, opt;
               ^
                = 0

Rearrange the code to make that more obvious and avoid the warning.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-23 21:48:30 -04:00
David Howells
c7e86acfce rxrpc: Fix lockup due to no error backoff after ack transmit error
If the network becomes (partially) unavailable, say by disabling IPv6, the
background ACK transmission routine can get itself into a tizzy by
proposing immediate ACK retransmission.  Since we're in the call event
processor, that happens immediately without returning to the workqueue
manager.

The condition should clear after a while when either the network comes back
or the call times out.

Fix this by:

 (1) When re-proposing an ACK on failed Tx, don't schedule it immediately.
     This will allow a certain amount of time to elapse before we try
     again.

 (2) Enforce a return to the workqueue manager after a certain number of
     iterations of the call processing loop.

 (3) Add a backoff delay that increases the delay on deferred ACKs by a
     jiffy per failed transmission to a limit of HZ.  The backoff delay is
     cleared on a successful return from kernel_sendmsg().

 (4) Cancel calls immediately if the opening sendmsg fails.  The layer
     above can arrange retransmission or rotate to another server.

Fixes: 248f219cb8 ("rxrpc: Rewrite the data and ack handling code")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-02 23:59:26 -07:00
David S. Miller
2e2d6f0342 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
net/sched/cls_api.c has overlapping changes to a call to
nlmsg_parse(), one (from 'net') added rtm_tca_policy instead of NULL
to the 5th argument, and another (from 'net-next') added cb->extack
instead of NULL to the 6th argument.

net/ipv4/ipmr_base.c is a case of a bug fix in 'net' being done to
code which moved (to mr_table_dump)) in 'net-next'.  Thanks to David
Ahern for the heads up.

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-19 11:03:06 -07:00
YueHaibing
d6672a5a97 rxrpc: use correct kvec num when sending BUSY response packet
Fixes gcc '-Wunused-but-set-variable' warning:

net/rxrpc/output.c: In function 'rxrpc_reject_packets':
net/rxrpc/output.c:527:11: warning:
 variable 'ioc' set but not used [-Wunused-but-set-variable]

'ioc' is the correct kvec num when sending a BUSY (or an ABORT) response
packet.

Fixes: ece64fec16 ("rxrpc: Emit BUSY packets when supposed to rather than ABORTs")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-15 22:08:17 -07:00
David Howells
5a790b7375 rxrpc: Drop the local endpoint arg from rxrpc_extract_addr_from_skb()
rxrpc_extract_addr_from_skb() doesn't use the argument that points to the
local endpoint, so remove the argument.

Signed-off-by: David Howells <dhowells@redhat.com>
2018-10-04 09:32:28 +01:00
David Howells
b3cfb6f567 rxrpc: Emit the data Tx trace line before transmitting
Print the data Tx trace line before transmitting so that it appears before
the trace lines indicating success or failure of the transmission.  This
makes the trace log less confusing.

Signed-off-by: David Howells <dhowells@redhat.com>
2018-10-04 09:32:27 +01:00
David Howells
ece64fec16 rxrpc: Emit BUSY packets when supposed to rather than ABORTs
In the input path, a received sk_buff can be marked for rejection by
setting RXRPC_SKB_MARK_* in skb->mark and, if needed, some auxiliary data
(such as an abort code) in skb->priority.  The rejection is handled by
queueing the sk_buff up for dealing with in process context.  The output
code reads the mark and priority and, theoretically, generates an
appropriate response packet.

However, if RXRPC_SKB_MARK_BUSY is set, this isn't noticed and an ABORT
message with a random abort code is generated (since skb->priority wasn't
set to anything).

Fix this by outputting the appropriate sort of packet.

Also, whilst we're at it, most of the marks are no longer used, so remove
them and rename the remaining two to something more obvious.

Fixes: 248f219cb8 ("rxrpc: Rewrite the data and ack handling code")
Signed-off-by: David Howells <dhowells@redhat.com>
2018-09-28 10:32:19 +01:00
David Howells
b604dd9883 rxrpc: Fix RTT gathering
Fix RTT information gathering in AF_RXRPC by the following means:

 (1) Enable Rx timestamping on the transport socket with SO_TIMESTAMPNS.

 (2) If the sk_buff doesn't have a timestamp set when rxrpc_data_ready()
     collects it, set it at that point.

 (3) Allow ACKs to be requested on the last packet of a client call, but
     not a service call.  We need to be careful lest we undo:

	bf7d620abf
	Author: David Howells <dhowells@redhat.com>
	Date:   Thu Oct 6 08:11:51 2016 +0100
	rxrpc: Don't request an ACK on the last DATA packet of a call's Tx phase

     but that only really applies to service calls that we're handling,
     since the client side gets to send the final ACK (or not).

 (4) When about to transmit an ACK or DATA packet, record the Tx timestamp
     before only; don't update the timestamp afterwards.

 (5) Switch the ordering between recording the serial and recording the
     timestamp to always set the serial number first.  The serial number
     shouldn't be seen referenced by an ACK packet until we've transmitted
     the packet bearing it - so in the Rx path, we don't need the timestamp
     until we've checked the serial number.

Fixes: cf1a6474f8 ("rxrpc: Add per-peer RTT tracker")
Signed-off-by: David Howells <dhowells@redhat.com>
2018-09-28 10:32:03 +01:00
David S. Miller
a736e07468 Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/net
Overlapping changes in RXRPC, changing to ktime_get_seconds() whilst
adding some tracepoints.

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09 11:52:36 -07:00
David Howells
330bdcfadc rxrpc: Fix the keepalive generator [ver #2]
AF_RXRPC has a keepalive message generator that generates a message for a
peer ~20s after the last transmission to that peer to keep firewall ports
open.  The implementation is incorrect in the following ways:

 (1) It mixes up ktime_t and time64_t types.

 (2) It uses ktime_get_real(), the output of which may jump forward or
     backward due to adjustments to the time of day.

 (3) If the current time jumps forward too much or jumps backwards, the
     generator function will crank the base of the time ring round one slot
     at a time (ie. a 1s period) until it catches up, spewing out VERSION
     packets as it goes.

Fix the problem by:

 (1) Only using time64_t.  There's no need for sub-second resolution.

 (2) Use ktime_get_seconds() rather than ktime_get_real() so that time
     isn't perceived to go backwards.

 (3) Simplifying rxrpc_peer_keepalive_worker() by splitting it into two
     parts:

     (a) The "worker" function that manages the buckets and the timer.

     (b) The "dispatch" function that takes the pending peers and
     	 potentially transmits a keepalive packet before putting them back
     	 in the ring into the slot appropriate to the revised last-Tx time.

 (4) Taking everything that's pending out of the ring and splicing it into
     a temporary collector list for processing.

     In the case that there's been a significant jump forward, the ring
     gets entirely emptied and then the time base can be warped forward
     before the peers are processed.

     The warping can't happen if the ring isn't empty because the slot a
     peer is in is keepalive-time dependent, relative to the base time.

 (5) Limit the number of iterations of the bucket array when scanning it.

 (6) Set the timer to skip any empty slots as there's no point waking up if
     there's nothing to do yet.

This can be triggered by an incoming call from a server after a reboot with
AF_RXRPC and AFS built into the kernel causing a peer record to be set up
before userspace is started.  The system clock is then adjusted by
userspace, thereby potentially causing the keepalive generator to have a
meltdown - which leads to a message like:

	watchdog: BUG: soft lockup - CPU#0 stuck for 23s! [kworker/0:1:23]
	...
	Workqueue: krxrpcd rxrpc_peer_keepalive_worker
	EIP: lock_acquire+0x69/0x80
	...
	Call Trace:
	 ? rxrpc_peer_keepalive_worker+0x5e/0x350
	 ? _raw_spin_lock_bh+0x29/0x60
	 ? rxrpc_peer_keepalive_worker+0x5e/0x350
	 ? rxrpc_peer_keepalive_worker+0x5e/0x350
	 ? __lock_acquire+0x3d3/0x870
	 ? process_one_work+0x110/0x340
	 ? process_one_work+0x166/0x340
	 ? process_one_work+0x110/0x340
	 ? worker_thread+0x39/0x3c0
	 ? kthread+0xdb/0x110
	 ? cancel_delayed_work+0x90/0x90
	 ? kthread_stop+0x70/0x70
	 ? ret_from_fork+0x19/0x24

Fixes: ace45bec6d ("rxrpc: Fix firewall route keepalive")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-08 19:10:26 -07:00
David Howells
4764c0da69 rxrpc: Trace packet transmission
Trace successful packet transmission (kernel_sendmsg() succeeded, that is)
in AF_RXRPC.  We can share the enum that defines the transmission points
with the trace_rxrpc_tx_fail() tracepoint, so rename its constants to be
applicable to both.

Also, save the internal call->debug_id in the rxrpc_channel struct so that
it can be used in retransmission trace lines.

Signed-off-by: David Howells <dhowells@redhat.com>
2018-08-01 13:28:23 +01:00
David Howells
6b47fe1d1c rxrpc: Trace UDP transmission failure
Add a tracepoint to log transmission failure from the UDP transport socket
being used by AF_RXRPC.

Signed-off-by: David Howells <dhowells@redhat.com>
2018-05-10 23:26:01 +01:00
David Howells
c54e43d752 rxrpc: Fix missing start of call timeout
The expect_rx_by call timeout is supposed to be set when a call is started
to indicate that we need to receive a packet by that point.  This is
currently put back every time we receive a packet, but it isn't started
when we first send a packet.  Without this, the call may wait forever if
the server doesn't deign to reply.

Fix this by setting the timeout upon a successful UDP sendmsg call for the
first DATA packet.  The timeout is initiated only for initial transmission
and not for subsequent retries as we don't want the retry mechanism to
extend the timeout indefinitely.

Fixes: a158bdd324 ("rxrpc: Fix call timeouts")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2018-05-10 23:26:00 +01:00
David Howells
ace45bec6d rxrpc: Fix firewall route keepalive
Fix the firewall route keepalive part of AF_RXRPC which is currently
function incorrectly by replying to VERSION REPLY packets from the server
with VERSION REQUEST packets.

Instead, send VERSION REPLY packets to the peers of service connections to
act as keep-alives 20s after the latest packet was transmitted to that
peer.

Also, just discard VERSION REPLY packets rather than replying to them.

Signed-off-by: David Howells <dhowells@redhat.com>
2018-03-30 21:04:43 +01:00
David Howells
93c62c45ed rxrpc: Fix send in rxrpc_send_data_packet()
All the kernel_sendmsg() calls in rxrpc_send_data_packet() need to send
both parts of the iov[] buffer, but one of them does not.  Fix it so that
it does.

Without this, short IPv6 rxrpc DATA packets may be seen that have the rxrpc
header included, but no payload.

Fixes: 5a924b8951 ("rxrpc: Don't store the rxrpc header in the Tx queue sk_buffs")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-22 15:37:47 -05:00
David Howells
415f44e432 rxrpc: Add keepalive for a call
We need to transmit a packet every so often to act as a keepalive for the
peer (which has a timeout from the last time it received a packet) and also
to prevent any intervening firewalls from closing the route.

Do this by resetting a timer every time we transmit a packet.  If the timer
ever expires, we transmit a PING ACK packet and thereby also elicit a PING
RESPONSE ACK from the other side - which prevents our last-rx timeout from
expiring.

The timer is set to 1/6 of the last-rx timeout so that we can detect the
other side going away if it misses 6 replies in a row.

This is particularly necessary for servers where the processing of the
service function may take a significant amount of time.

Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-24 10:18:42 +00:00
David Howells
bd1fdf8cfd rxrpc: Add a timeout for detecting lost ACKs/lost DATA
Add an extra timeout that is set/updated when we send a DATA packet that
has the request-ack flag set.  This allows us to detect if we don't get an
ACK in response to the latest flagged packet.

The ACK packet is adjudged to have been lost if it doesn't turn up within
2*RTT of the transmission.

If the timeout occurs, we schedule the sending of a PING ACK to find out
the state of the other side.  If a new DATA packet is ready to go sooner,
we cancel the sending of the ping and set the request-ack flag on that
instead.

If we get back a PING-RESPONSE ACK that indicates a lower tx_top than what
we had at the time of the ping transmission, we adjudge all the DATA
packets sent between the response tx_top and the ping-time tx_top to have
been lost and retransmit immediately.

Rather than sending a PING ACK, we could just pick a DATA packet and
speculatively retransmit that with request-ack set.  It should result in
either a REQUESTED ACK or a DUPLICATE ACK which we can then use in lieu the
a PING-RESPONSE ACK mentioned above.

Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-24 10:18:42 +00:00
David Howells
dcbefc30fb rxrpc: Fix call expiry handling
Fix call expiry handling in the following ways

 (1) If all the request data from a client call is acked, don't send a
     follow up IDLE ACK with firstPacket == 1 and previousPacket == 0 as
     this appears to fool some servers into thinking everything has been
     accepted.

 (2) Never send an abort back to the server once it has ACK'd all the
     request packets; rather just try to reuse the channel for the next
     call.  The first request DATA packet of the next call on the same
     channel will implicitly ACK the entire reply of the dead call - even
     if we haven't transmitted it yet.

 (3) Don't send RX_CALL_TIMEOUT in an ABORT packet, librx uses abort codes
     to pass local errors to the caller in addition to remote errors, and
     this is meant to be local only.

The following also need to be addressed in future patches:

 (4) Service calls should send PING ACKs as 'keep alives' if the server is
     still processing the call.

 (5) VERSION REPLY packets should be sent to the peers of service
     connections to act as keep-alives.  This is used to keep firewall
     routes in place.  The AFS CM should enable this.

Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-02 15:20:43 +00:00
David Howells
1457cc4cfb rxrpc: Fix a null ptr deref in rxrpc_fill_out_ack()
rxrpc_fill_out_ack() needs to be passed the connection pointer from its
caller rather than using call->conn as the call may be disconnected in
parallel with it, clearing call->conn, leading to:

	BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
	IP: rxrpc_send_ack_packet+0x231/0x6a4

Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-02 15:20:43 +00:00
David Howells
7b674e390e rxrpc: Fix IPv6 support
Fix IPv6 support in AF_RXRPC in the following ways:

 (1) When extracting the address from a received IPv4 packet, if the local
     transport socket is open for IPv6 then fill out the sockaddr_rxrpc
     struct for an IPv4-mapped-to-IPv6 AF_INET6 transport address instead
     of an AF_INET one.

 (2) When sending CHALLENGE or RESPONSE packets, the transport length needs
     to be set from the sockaddr_rxrpc::transport_len field rather than
     sizeof() on the IPv4 transport address.

 (3) When processing an IPv4 ICMP packet received by an IPv6 socket, set up
     the address correctly before searching for the affected peer.

Signed-off-by: David Howells <dhowells@redhat.com>
2017-08-29 10:55:20 +01:00
David Howells
4e255721d1 rxrpc: Add service upgrade support for client connections
Make it possible for a client to use AuriStor's service upgrade facility.

The client does this by adding an RXRPC_UPGRADE_SERVICE control message to
the first sendmsg() of a call.  This takes no parameters.

When recvmsg() starts returning data from the call, the service ID field in
the returned msg_name will reflect the result of the upgrade attempt.  If
the upgrade was ignored, srx_service will match what was set in the
sendmsg(); if the upgrade happened the srx_service will be altered to
indicate the service the server upgraded to.

Note that:

 (1) The choice of upgrade service is up to the server

 (2) Further client calls to the same server that would share a connection
     are blocked if an upgrade probe is in progress.

 (3) This should only be used to probe the service.  Clients should then
     use the returned service ID in all subsequent communications with that
     server (and not set the upgrade).  Note that the kernel will not
     retain this information should the connection expire from its cache.

 (4) If a server that supports upgrading is replaced by one that doesn't,
     whilst a connection is live, and if the replacement is running, say,
     OpenAFS 1.6.4 or older or an older IBM AFS, then the replacement
     server will not respond to packets sent to the upgraded connection.

     At this point, calls will time out and the server must be reprobed.

Signed-off-by: David Howells <dhowells@redhat.com>
2017-06-05 14:30:49 +01:00
David Howells
bf7d620abf rxrpc: Don't request an ACK on the last DATA packet of a call's Tx phase
Don't request an ACK on the last DATA packet of a call's Tx phase as for a
client there will be a reply packet or some sort of ACK to shift phase.  If
the ACK is requested, OpenAFS sends a REQUESTED-ACK ACK with soft-ACKs in
it and doesn't follow up with a hard-ACK.

If we don't set the flag, OpenAFS will send a DELAY ACK that hard-ACKs the
reply data, thereby allowing the call to terminate cleanly.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-10-06 08:11:51 +01:00
David Howells
a5af7e1fc6 rxrpc: Fix loss of PING RESPONSE ACK production due to PING ACKs
Separate the output of PING ACKs from the output of other sorts of ACK so
that if we receive a PING ACK and schedule transmission of a PING RESPONSE
ACK, the response doesn't get cancelled by a PING ACK we happen to be
scheduling transmission of at the same time.

If a PING RESPONSE gets lost, the other side might just sit there waiting
for it and refuse to proceed otherwise.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-10-06 08:11:49 +01:00
David Howells
26cb02aa6d rxrpc: Fix warning by splitting rxrpc_send_call_packet()
Split rxrpc_send_data_packet() to separate ACK generation (which is more
complicated) from ABORT generation.  This simplifies the code a bit and
fixes the following warning:

In file included from ../net/rxrpc/output.c:20:0:
net/rxrpc/output.c: In function 'rxrpc_send_call_packet':
net/rxrpc/ar-internal.h:1187:27: error: 'top' may be used uninitialized in this function [-Werror=maybe-uninitialized]
net/rxrpc/output.c:103:24: note: 'top' was declared here
net/rxrpc/output.c:225:25: error: 'hard_ack' may be used uninitialized in this function [-Werror=maybe-uninitialized]

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David Howells <dhowells@redhat.com>
2016-10-06 08:11:49 +01:00
David Howells
b112a67081 rxrpc: Request more ACKs in slow-start mode
Set the request-ACK on more DATA packets whilst we're in slow start mode so
that we get sufficient ACKs back to supply information to configure the
window.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-29 22:57:47 +01:00
David Howells
a1767077b0 rxrpc: Make Tx loss-injection go through normal return and adjust tracing
In rxrpc_send_data_packet() make the loss-injection path return through the
same code as the transmission path so that the RTT determination is
initiated and any future timer shuffling will be done, despite the packet
having been binned.

Whilst we're at it:

 (1) Add to the tx_data tracepoint an indication of whether or not we're
     retransmitting a data packet.

 (2) When we're deciding whether or not to request an ACK, rather than
     checking if we're in fast-retransmit mode check instead if we're
     retransmitting.

 (3) Don't invoke the lose_skb tracepoint when losing a Tx packet as we're
     not altering the sk_buff refcount nor are we just seeing it after
     getting it off the Tx list.

 (4) The rxrpc_skb_tx_lost note is then no longer used so remove it.

 (5) rxrpc_lose_skb() no longer needs to deal with rxrpc_skb_tx_lost.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-29 22:37:15 +01:00
David Howells
57494343cb rxrpc: Implement slow-start
Implement RxRPC slow-start, which is similar to RFC 5681 for TCP.  A
tracepoint is added to log the state of the congestion management algorithm
and the decisions it makes.

Notes:

 (1) Since we send fixed-size DATA packets (apart from the final packet in
     each phase), counters and calculations are in terms of packets rather
     than bytes.

 (2) The ACK packet carries the equivalent of TCP SACK.

 (3) The FLIGHT_SIZE calculation in RFC 5681 doesn't seem particularly
     suited to SACK of a small number of packets.  It seems that, almost
     inevitably, by the time three 'duplicate' ACKs have been seen, we have
     narrowed the loss down to one or two missing packets, and the
     FLIGHT_SIZE calculation ends up as 2.

 (4) In rxrpc_resend(), if there was no data that apparently needed
     retransmission, we transmit a PING ACK to ask the peer to tell us what
     its Rx window state is.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-24 23:49:46 +01:00
David Howells
805b21b929 rxrpc: Send an ACK after every few DATA packets we receive
Send an ACK if we haven't sent one for the last two packets we've received.
This keeps the other end apprised of where we've got to - which is
important if they're doing slow-start.

We do this in recvmsg so that we can dispatch a packet directly without the
need to wake up the background thread.

This should possibly be made configurable in future.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-24 18:05:26 +01:00
David Howells
9c7ad43444 rxrpc: Add tracepoint for ACK proposal
Add a tracepoint to log proposed ACKs, including whether the proposal is
used to update a pending ACK or is discarded in favour of an easlier,
higher priority ACK.

Whilst we're at it, get rid of the rxrpc_acks() function and access the
name array directly.  We do, however, need to validate the ACK reason
number given to trace_rxrpc_rx_ack() to make sure we don't overrun the
array.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-23 15:49:19 +01:00