The goal is to check that the source address selected by the kernel is
routable when a leaking route is used. ICMP, TCP and UDP connections are
tested.
The symmetric topology is enough for this test.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240710081521.3809742-5-nicolas.dichtel@6wind.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lately, an additional locking was added by commit c0a40097f0
("drivers: core: synchronize really_probe() and dev_uevent()"). The
locking protects dev_uevent() calling. This function is used to send
messages from the kernel to user space. Uevent messages notify user space
about changes in device states, such as when a device is added, removed,
or changed. These messages are used by udev (or other similar user-space
tools) to apply device-specific rules.
After reloading devlink instance, udev events should be processed. This
locking causes a short delay of udev events handling.
One example for useful udev rule is renaming ports. 'forwading.config'
can be configured to use names after udev rules are applied. Some tests run
devlink_reload() and immediately use the updated names. This worked before
the above mentioned commit was pushed, but now the delay of uevent messages
causes that devlink_reload() returns before udev events are handled and
tests fail.
Adjust devlink_reload() to not assume that udev events are already
processed when devlink reload is done, instead, wait for udev events to
ensure they are processed before returning from the function.
Without this patch:
TESTS='rif_mac_profile' ./resource_scale.sh
TEST: 'rif_mac_profile' 4 [ OK ]
sysctl: cannot stat /proc/sys/net/ipv6/conf/swp1/disable_ipv6: No such file or directory
sysctl: cannot stat /proc/sys/net/ipv6/conf/swp1/disable_ipv6: No such file or directory
sysctl: cannot stat /proc/sys/net/ipv6/conf/swp2/disable_ipv6: No such file or directory
sysctl: cannot stat /proc/sys/net/ipv6/conf/swp2/disable_ipv6: No such file or directory
Cannot find device "swp1"
Cannot find device "swp2"
TEST: setup_wait_dev (: Interface swp1 does not come up.) [FAIL]
With this patch:
$ TESTS='rif_mac_profile' ./resource_scale.sh
TEST: 'rif_mac_profile' 4 [ OK ]
TEST: 'rif_mac_profile' overflow 5 [ OK ]
This is relevant not only for this test.
Fixes: bc7cbb1e9f ("selftests: forwarding: Add devlink_lib.sh")
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/89367666e04b38a8993027f1526801ca327ab96a.1720709333.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* kvm-arm64/ctr-el0:
: Support for user changes to CTR_EL0, courtesy of Sebastian Ott
:
: Allow userspace to change the guest-visible value of CTR_EL0 for a VM,
: so long as the requested value represents a subset of features supported
: by hardware. In other words, prevent the VMM from over-promising the
: capabilities of hardware.
:
: Make this happen by fitting CTR_EL0 into the existing infrastructure for
: feature ID registers.
KVM: selftests: Assert that MPIDR_EL1 is unchanged across vCPU reset
KVM: arm64: nv: Unfudge ID_AA64PFR0_EL1 masking
KVM: selftests: arm64: Test writes to CTR_EL0
KVM: arm64: rename functions for invariant sys regs
KVM: arm64: show writable masks for feature registers
KVM: arm64: Treat CTR_EL0 as a VM feature ID register
KVM: arm64: unify code to prepare traps
KVM: arm64: nv: Use accessors for modifying ID registers
KVM: arm64: Add helper for writing ID regs
KVM: arm64: Use read-only helper for reading VM ID registers
KVM: arm64: Make idregs debugfs iterator search sysreg table directly
KVM: arm64: Get sys_reg encoding from descriptor in idregs_debug_show()
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
It looks like we missed these two errors recently:
- SC2068: Double quote array expansions to avoid re-splitting elements.
- SC2145: Argument mixes string and array. Use * or separate argument.
Two simple fixes, it is not supposed to change the behaviour as the
variable names should not have any spaces in their names. Still, better
to fix them to easily spot new issues.
Fixes: f265d3119a ("selftests: mptcp: lib: use setup/cleanup_ns helpers")
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240712-upstream-net-next-20240712-selftests-mptcp-fix-shellcheck-v1-1-1cb7180db40a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp_ao/self-connect.c checked the following SNMP stats before/after
connect() to confirm that the test exercises the simultaneous connect()
path.
* TCPChallengeACK
* TCPSYNChallenge
But the stats should not be counted for self-connect in the first place,
and the assumption is no longer true.
Let's remove the check.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Dmitry Safonov <dima@arista.com>
Link: https://patch.msgid.link/20240710171246.87533-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add install target for vsock to make Yocto easy to install the images.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20240710122728.45044-1-peng.fan@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZpGVmAAKCRDbK58LschI
gxB4AQCgquQis63yqTI36j4iXBT+TuxHEBNoQBSLyzYdrLS1dgD/S5DRJDA+3LD+
394hn/VtB1qvX5vaqjsov4UIwSMyxA0=
=OhSn
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-07-12
We've added 23 non-merge commits during the last 3 day(s) which contain
a total of 18 files changed, 234 insertions(+), 243 deletions(-).
The main changes are:
1) Improve BPF verifier by utilizing overflow.h helpers to check
for overflows, from Shung-Hsi Yu.
2) Fix NULL pointer dereference in resolve_prog_type() for BPF_PROG_TYPE_EXT
when attr->attach_prog_fd was not specified, from Tengda Wu.
3) Fix arm64 BPF JIT when generating code for BPF trampolines with
BPF_TRAMP_F_CALL_ORIG which corrupted upper address bits,
from Puranjay Mohan.
4) Remove test_run callback from lwt_seg6local_prog_ops which never worked
in the first place and caused syzbot reports,
from Sebastian Andrzej Siewior.
5) Relax BPF verifier to accept non-zero offset on KF_TRUSTED_ARGS/
/KF_RCU-typed BPF kfuncs, from Matt Bobrowski.
6) Fix a long standing bug in libbpf with regards to handling of BPF
skeleton's forward and backward compatibility, from Andrii Nakryiko.
7) Annotate btf_{seq,snprintf}_show functions with __printf,
from Alan Maguire.
8) BPF selftest improvements to reuse common network helpers in sk_lookup
test and dropping the open-coded inetaddr_len() and make_socket() ones,
from Geliang Tang.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (23 commits)
selftests/bpf: Test for null-pointer-deref bugfix in resolve_prog_type()
bpf: Fix null pointer dereference in resolve_prog_type() for BPF_PROG_TYPE_EXT
selftests/bpf: DENYLIST.aarch64: Skip fexit_sleep again
bpf: use check_sub_overflow() to check for subtraction overflows
bpf: use check_add_overflow() to check for addition overflows
bpf: fix overflow check in adjust_jmp_off()
bpf: Eliminate remaining "make W=1" warnings in kernel/bpf/btf.o
bpf: annotate BTF show functions with __printf
bpf, arm64: Fix trampoline for BPF_TRAMP_F_CALL_ORIG
selftests/bpf: Close obj in error path in xdp_adjust_tail
selftests/bpf: Null checks for links in bpf_tcp_ca
selftests/bpf: Use connect_fd_to_fd in sk_lookup
selftests/bpf: Use start_server_addr in sk_lookup
selftests/bpf: Use start_server_str in sk_lookup
selftests/bpf: Close fd in error path in drop_on_reuseport
selftests/bpf: Add ASSERT_OK_FD macro
selftests/bpf: Add backlog for network_helper_opts
selftests/bpf: fix compilation failure when CONFIG_NF_FLOW_TABLE=m
bpf: Remove tst_run from lwt_seg6local_prog_ops.
bpf: relax zero fixed offset constraint on KF_TRUSTED_ARGS/KF_RCU
...
====================
Link: https://patch.msgid.link/20240712212448.5378-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend existing proc-pid-vm.c tests with PROCMAP_QUERY ioctl() API. Test
a few successful and negative cases, validating querying filtering and
exact vs next VMA logic works as expected.
Link: https://lkml.kernel.org/r/20240627170900.1672542-7-andrii@kernel.org
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We need this UAPI header in tools/include subdirectory for using it from
BPF selftests.
Link: https://lkml.kernel.org/r/20240627170900.1672542-6-andrii@kernel.org
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Since the memfd pages associated with a udmabuf may be migrated as part of
udmabuf create, we need to verify the data coherency after successful
migration. The new tests added in this patch try to do just that using 4k
sized pages and also 2 MB sized huge pages for the memfd.
Successful completion of the tests would mean that there is no disconnect
between the memfd pages and the ones associated with a udmabuf. And,
these tests can also be augmented in the future to test newer udmabuf
features (such as handling memfd hole punch).
The idea for these tests comes from a patch by Mike Kravetz here:
https://lists.freedesktop.org/archives/dri-devel/2023-June/410623.html
v1->v2: (suggestions from Shuah)
- Use ksft_* functions to print and capture results of tests
- Use appropriate KSFT_* status codes for exit()
- Add Mike Kravetz's suggested-by tag
Link: https://lkml.kernel.org/r/20240624063952.1572359-10-vivek.kasireddy@intel.com
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Suggested-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Hugh Dickins <hughd@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Dongwon Kim <dongwon.kim@intel.com>
Cc: Junxiao Chang <junxiao.chang@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This test verifies that resolve_prog_type() works as expected when
`attach_prog_fd` is not passed in.
`prog->aux->dst_prog` in resolve_prog_type() is assigned by
`attach_prog_fd`, and would be NULL if `attach_prog_fd` is not provided.
Loading EXT prog with bpf_dynptr_from_skb() kfunc call in this way will
lead to null-pointer-deref.
Verify that the null-pointer-deref bug in resolve_prog_type() is fixed.
Signed-off-by: Tengda Wu <wutengda@huaweicloud.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240711145819.254178-3-wutengda@huaweicloud.com
This is a bug found when implementing pretty-printing for the
landlock_add_rule system call, I decided to send this patch separately
because this is a serious bug that should be fixed fast.
I wrote a test program to do landlock_add_rule syscall in a loop,
yet perf trace -e landlock_add_rule freezes, giving no output.
This bug is introduced by the false understanding of the variable "key"
below:
```
for (key = 0; key < trace->sctbl->syscalls.nr_entries; ++key) {
struct syscall *sc = trace__syscall_info(trace, NULL, key);
...
}
```
The code above seems right at the beginning, but when looking at
syscalltbl.c, I found these lines:
```
for (i = 0; i <= syscalltbl_native_max_id; ++i)
if (syscalltbl_native[i])
++nr_entries;
entries = tbl->syscalls.entries = malloc(sizeof(struct syscall) * nr_entries);
...
for (i = 0, j = 0; i <= syscalltbl_native_max_id; ++i) {
if (syscalltbl_native[i]) {
entries[j].name = syscalltbl_native[i];
entries[j].id = i;
++j;
}
}
```
meaning the key is merely an index to traverse the syscall table,
instead of the actual syscall id for this particular syscall.
So if one uses key to do trace__syscall_info(trace, NULL, key), because
key only goes up to trace->sctbl->syscalls.nr_entries, for example, on
my X86_64 machine, this number is 373, it will end up neglecting all
the rest of the syscall, in my case, everything after `rseq`, because
the traversal will stop at 373, and `rseq` is the last syscall whose id
is lower than 373
in tools/perf/arch/x86/include/generated/asm/syscalls_64.c:
```
...
[334] = "rseq",
[424] = "pidfd_send_signal",
...
```
The reason why the key is scrambled but perf trace works well is that
key is used in trace__syscall_info(trace, NULL, key) to do
trace->syscalls.table[id], this makes sure that the struct syscall returned
actually has an id the same value as key, making the later bpf_prog
matching all correct.
After fixing this bug, I can do perf trace on 38 more syscalls, and
because more syscalls are visible, we get 8 more syscalls that can be
augmented.
before:
perf $ perf trace -vv --max-events=1 |& grep Reusing
Reusing "open" BPF sys_enter augmenter for "stat"
Reusing "open" BPF sys_enter augmenter for "lstat"
Reusing "open" BPF sys_enter augmenter for "access"
Reusing "connect" BPF sys_enter augmenter for "accept"
Reusing "sendto" BPF sys_enter augmenter for "recvfrom"
Reusing "connect" BPF sys_enter augmenter for "bind"
Reusing "connect" BPF sys_enter augmenter for "getsockname"
Reusing "connect" BPF sys_enter augmenter for "getpeername"
Reusing "open" BPF sys_enter augmenter for "execve"
Reusing "open" BPF sys_enter augmenter for "truncate"
Reusing "open" BPF sys_enter augmenter for "chdir"
Reusing "open" BPF sys_enter augmenter for "mkdir"
Reusing "open" BPF sys_enter augmenter for "rmdir"
Reusing "open" BPF sys_enter augmenter for "creat"
Reusing "open" BPF sys_enter augmenter for "link"
Reusing "open" BPF sys_enter augmenter for "unlink"
Reusing "open" BPF sys_enter augmenter for "symlink"
Reusing "open" BPF sys_enter augmenter for "readlink"
Reusing "open" BPF sys_enter augmenter for "chmod"
Reusing "open" BPF sys_enter augmenter for "chown"
Reusing "open" BPF sys_enter augmenter for "lchown"
Reusing "open" BPF sys_enter augmenter for "mknod"
Reusing "open" BPF sys_enter augmenter for "statfs"
Reusing "open" BPF sys_enter augmenter for "pivot_root"
Reusing "open" BPF sys_enter augmenter for "chroot"
Reusing "open" BPF sys_enter augmenter for "acct"
Reusing "open" BPF sys_enter augmenter for "swapon"
Reusing "open" BPF sys_enter augmenter for "swapoff"
Reusing "open" BPF sys_enter augmenter for "delete_module"
Reusing "open" BPF sys_enter augmenter for "setxattr"
Reusing "open" BPF sys_enter augmenter for "lsetxattr"
Reusing "openat" BPF sys_enter augmenter for "fsetxattr"
Reusing "open" BPF sys_enter augmenter for "getxattr"
Reusing "open" BPF sys_enter augmenter for "lgetxattr"
Reusing "openat" BPF sys_enter augmenter for "fgetxattr"
Reusing "open" BPF sys_enter augmenter for "listxattr"
Reusing "open" BPF sys_enter augmenter for "llistxattr"
Reusing "open" BPF sys_enter augmenter for "removexattr"
Reusing "open" BPF sys_enter augmenter for "lremovexattr"
Reusing "fsetxattr" BPF sys_enter augmenter for "fremovexattr"
Reusing "open" BPF sys_enter augmenter for "mq_open"
Reusing "open" BPF sys_enter augmenter for "mq_unlink"
Reusing "fsetxattr" BPF sys_enter augmenter for "add_key"
Reusing "fremovexattr" BPF sys_enter augmenter for "request_key"
Reusing "fremovexattr" BPF sys_enter augmenter for "inotify_add_watch"
Reusing "fremovexattr" BPF sys_enter augmenter for "mkdirat"
Reusing "fremovexattr" BPF sys_enter augmenter for "mknodat"
Reusing "fremovexattr" BPF sys_enter augmenter for "fchownat"
Reusing "fremovexattr" BPF sys_enter augmenter for "futimesat"
Reusing "fremovexattr" BPF sys_enter augmenter for "newfstatat"
Reusing "fremovexattr" BPF sys_enter augmenter for "unlinkat"
Reusing "fremovexattr" BPF sys_enter augmenter for "linkat"
Reusing "open" BPF sys_enter augmenter for "symlinkat"
Reusing "fremovexattr" BPF sys_enter augmenter for "readlinkat"
Reusing "fremovexattr" BPF sys_enter augmenter for "fchmodat"
Reusing "fremovexattr" BPF sys_enter augmenter for "faccessat"
Reusing "fremovexattr" BPF sys_enter augmenter for "utimensat"
Reusing "connect" BPF sys_enter augmenter for "accept4"
Reusing "fremovexattr" BPF sys_enter augmenter for "name_to_handle_at"
Reusing "fremovexattr" BPF sys_enter augmenter for "renameat2"
Reusing "open" BPF sys_enter augmenter for "memfd_create"
Reusing "fremovexattr" BPF sys_enter augmenter for "execveat"
Reusing "fremovexattr" BPF sys_enter augmenter for "statx"
after
perf $ perf trace -vv --max-events=1 |& grep Reusing
Reusing "open" BPF sys_enter augmenter for "stat"
Reusing "open" BPF sys_enter augmenter for "lstat"
Reusing "open" BPF sys_enter augmenter for "access"
Reusing "connect" BPF sys_enter augmenter for "accept"
Reusing "sendto" BPF sys_enter augmenter for "recvfrom"
Reusing "connect" BPF sys_enter augmenter for "bind"
Reusing "connect" BPF sys_enter augmenter for "getsockname"
Reusing "connect" BPF sys_enter augmenter for "getpeername"
Reusing "open" BPF sys_enter augmenter for "execve"
Reusing "open" BPF sys_enter augmenter for "truncate"
Reusing "open" BPF sys_enter augmenter for "chdir"
Reusing "open" BPF sys_enter augmenter for "mkdir"
Reusing "open" BPF sys_enter augmenter for "rmdir"
Reusing "open" BPF sys_enter augmenter for "creat"
Reusing "open" BPF sys_enter augmenter for "link"
Reusing "open" BPF sys_enter augmenter for "unlink"
Reusing "open" BPF sys_enter augmenter for "symlink"
Reusing "open" BPF sys_enter augmenter for "readlink"
Reusing "open" BPF sys_enter augmenter for "chmod"
Reusing "open" BPF sys_enter augmenter for "chown"
Reusing "open" BPF sys_enter augmenter for "lchown"
Reusing "open" BPF sys_enter augmenter for "mknod"
Reusing "open" BPF sys_enter augmenter for "statfs"
Reusing "open" BPF sys_enter augmenter for "pivot_root"
Reusing "open" BPF sys_enter augmenter for "chroot"
Reusing "open" BPF sys_enter augmenter for "acct"
Reusing "open" BPF sys_enter augmenter for "swapon"
Reusing "open" BPF sys_enter augmenter for "swapoff"
Reusing "open" BPF sys_enter augmenter for "delete_module"
Reusing "open" BPF sys_enter augmenter for "setxattr"
Reusing "open" BPF sys_enter augmenter for "lsetxattr"
Reusing "openat" BPF sys_enter augmenter for "fsetxattr"
Reusing "open" BPF sys_enter augmenter for "getxattr"
Reusing "open" BPF sys_enter augmenter for "lgetxattr"
Reusing "openat" BPF sys_enter augmenter for "fgetxattr"
Reusing "open" BPF sys_enter augmenter for "listxattr"
Reusing "open" BPF sys_enter augmenter for "llistxattr"
Reusing "open" BPF sys_enter augmenter for "removexattr"
Reusing "open" BPF sys_enter augmenter for "lremovexattr"
Reusing "fsetxattr" BPF sys_enter augmenter for "fremovexattr"
Reusing "open" BPF sys_enter augmenter for "mq_open"
Reusing "open" BPF sys_enter augmenter for "mq_unlink"
Reusing "fsetxattr" BPF sys_enter augmenter for "add_key"
Reusing "fremovexattr" BPF sys_enter augmenter for "request_key"
Reusing "fremovexattr" BPF sys_enter augmenter for "inotify_add_watch"
Reusing "fremovexattr" BPF sys_enter augmenter for "mkdirat"
Reusing "fremovexattr" BPF sys_enter augmenter for "mknodat"
Reusing "fremovexattr" BPF sys_enter augmenter for "fchownat"
Reusing "fremovexattr" BPF sys_enter augmenter for "futimesat"
Reusing "fremovexattr" BPF sys_enter augmenter for "newfstatat"
Reusing "fremovexattr" BPF sys_enter augmenter for "unlinkat"
Reusing "fremovexattr" BPF sys_enter augmenter for "linkat"
Reusing "open" BPF sys_enter augmenter for "symlinkat"
Reusing "fremovexattr" BPF sys_enter augmenter for "readlinkat"
Reusing "fremovexattr" BPF sys_enter augmenter for "fchmodat"
Reusing "fremovexattr" BPF sys_enter augmenter for "faccessat"
Reusing "fremovexattr" BPF sys_enter augmenter for "utimensat"
Reusing "connect" BPF sys_enter augmenter for "accept4"
Reusing "fremovexattr" BPF sys_enter augmenter for "name_to_handle_at"
Reusing "fremovexattr" BPF sys_enter augmenter for "renameat2"
Reusing "open" BPF sys_enter augmenter for "memfd_create"
Reusing "fremovexattr" BPF sys_enter augmenter for "execveat"
Reusing "fremovexattr" BPF sys_enter augmenter for "statx"
TL;DR:
These are the new syscalls that can be augmented
Reusing "openat" BPF sys_enter augmenter for "open_tree"
Reusing "openat" BPF sys_enter augmenter for "openat2"
Reusing "openat" BPF sys_enter augmenter for "mount_setattr"
Reusing "openat" BPF sys_enter augmenter for "move_mount"
Reusing "open" BPF sys_enter augmenter for "fsopen"
Reusing "openat" BPF sys_enter augmenter for "fspick"
Reusing "openat" BPF sys_enter augmenter for "faccessat2"
Reusing "openat" BPF sys_enter augmenter for "fchmodat2"
as for the perf trace output:
before
perf $ perf trace -e faccessat2 --max-events=1
[no output]
after
perf $ ./perf trace -e faccessat2 --max-events=1
0.000 ( 0.037 ms): waybar/958 faccessat2(dfd: 40, filename: "uevent") = 0
P.S. The reason why this bug was not found in the past five years is
probably because it only happens to the newer syscalls whose id is
greater, for instance, faccessat2 of id 439, which not a lot of people
care about when using perf trace.
[Arnaldo]: notes
That and the fact that the BPF code was hidden before having to use -e,
that got changed kinda recently when we switched to using BPF skels for
augmenting syscalls in 'perf trace':
⬢[acme@toolbox perf-tools-next]$ git log --oneline tools/perf/util/bpf_skel/augmented_raw_syscalls.bpf.c
a9f4c6c999 perf trace: Collect sys_nanosleep first argument
29d16de26d perf augmented_raw_syscalls.bpf: Move 'struct timespec64' to vmlinux.h
5069211e2f perf trace: Use the right bpf_probe_read(_str) variant for reading user data
33b725ce7b perf trace: Avoid compile error wrt redefining bool
7d9642311b perf bpf augmented_raw_syscalls: Add an assert to make sure sizeof(augmented_arg->value) is a power of two.
262b54b6c9 perf bpf augmented_raw_syscalls: Add an assert to make sure sizeof(saddr) is a power of two.
1836480429 perf bpf_skel augmented_raw_syscalls: Cap the socklen parameter using &= sizeof(saddr)
cd2cece61a perf trace: Tidy comments related to BPF + syscall augmentation
5e6da6be30 perf trace: Migrate BPF augmentation to use a skeleton
⬢[acme@toolbox perf-tools-next]$
⬢[acme@toolbox perf-tools-next]$ git show --oneline --pretty=reference 5e6da6be30 | head -1
5e6da6be30 (perf trace: Migrate BPF augmentation to use a skeleton, 2023-08-10)
⬢[acme@toolbox perf-tools-next]$
I.e. from August, 2023.
One had as well to ask for BUILD_BPF_SKEL=1, which now is default if all
it needs is available on the system.
I simplified the code to not expose the 'struct syscall' outside of
tools/perf/util/syscalltbl.c, instead providing a function to go from
the index to the syscall id:
int syscalltbl__id_at_idx(struct syscalltbl *tbl, int idx);
Signed-off-by: Howard Chu <howardchu95@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/lkml/ZmhlAxbVcAKoPTg8@x1
Link: https://lore.kernel.org/r/20240705132059.853205-2-howardchu95@gmail.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Various files had been missed from having accessor functions added for
the sake of dso reference count checking. Add the function calls and
missing dso accessor functions.
Fixes: ee756ef749 ("perf dso: Add reference count checking and accessor functions")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Yunseong Kim <yskelg@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240704011745.1021288-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
It is possible that memory events are not supported on all CPUs.
Prints a warning by dumping the enabled CPU maps in this case.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: John Garry <john.g.garry@oracle.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20240706152035.86983-3-leo.yan@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
A platform can have more than one Arm SPE PMU. For example, a system
with multiple clusters may have each cluster enabled with its own Arm
SPE instance. In such case, the PMU devices will be named 'arm_spe_0',
'arm_spe_1', and so on.
Currently, the tool only supports 'arm_spe_0'. This commit extends
support to multiple Arm SPE PMUs by detecting the substring 'arm_spe_'.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: John Garry <john.g.garry@oracle.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20240706152035.86983-2-leo.yan@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Change the unused var in 'arch/x86/entry/syscalls/syscalltbl.sh' to '_'
when reading from '$sorted_table'. This change allows the script to pass
tests of ShellCheck before and after version 0.7.2 at the same time.
When building in arch x86, syscalltbl.sh got a ShellCheck warning, which
makes compilation error:
In arch/x86/entry/syscalls/syscalltbl.sh line 27:
while read nr _abi name entry _compat; do
^-^ SC2034: abi appears unused.
Verify use (or export if used externally).
^----^ SC2034: compat appears unused.
Verify use (or export if used externally).
The script reads unused param abi and compat. It uses format '_xxx' to
indicate dummy vars, which won't work properly when ShellCheck <= 0.7.2.
According to SC2034, the more general way of writing is to use directly
'_' to indicate discarding vars. 'entry' is also replaced by '_' because
it just happens to be defined in emit function, otherwise it will lead
to some misunderstandings.
Link: https://www.shellcheck.net/wiki/SC2034
Signed-off-by: Haoze Xie <royenheart@gmail.com>
Signed-off-by: Yuan Tan <tanyuan@tinylab.org>
Link: https://lore.kernel.org/r/2143cab4cd8468c88860f4e5e382d0e6b4d89ac9.1720372178.git.royenheart@gmail.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Modified the object of 'memset' from '&lost.lost' to '&lost' in
record__read_lost_samples. This allows 'memset' to access memory properly
without causing out-of-bounds problems.
The problems got from builtin-record.c are:
In file included from /usr/include/string.h:495,
from util/parse-events.h:13,
from builtin-record.c:14:
In function 'memset',
inlined from 'record__read_lost_samples' at
builtin-record.c:1958:6,
inlined from '__cmd_record.constprop' at builtin-record.c:2817:2:
/usr/include/x86_64-linux-gnu/bits/string_fortified.h:71:10: error:
'__builtin_memset' offset [17, 64] from the object at 'lost' is out
of the bounds of referenced subobject 'lost' with type
'struct perf_record_lost_samples' at offset 0 [-Werror=array-bounds]
71|return __builtin___memset_chk (__dest,__ch,__len,__bos0 (__dest));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The error arised when performing a memset operation on the 'lost' variable,
the bytes of 'sizeof(lost)' exceeds that of '&lost.lost', which are 64
and 16.
Fixes: 6c1785cd75 ("perf record: Ensure space for lost samples")
Signed-off-by: Haoze Xie <royenheart@gmail.com>
Signed-off-by: Yuan Tan <tanyuan@tinylab.org>
Link: https://lore.kernel.org/r/11e12f171b846577cac698cd3999db3d7f6c4d03.1720372317.git.royenheart@gmail.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
By default, perf sched map prints sched-in events for all the tasks
which may not be required all the time as it prints lot of symbols
and rows to the terminal.
With --task-name option, one could specify the specific task name
for which the map has to be shown. This would help in analyzing the
CPU usage patterns easier for that specific task. Since multiple
PID's might have the same task name, using task-name filter
would be more useful for debugging.
For other tasks, instead of printing the symbol, '-' is printed and
the same '.' is used to represent idle. '-' is used instead of symbol
for other tasks because it helps in clear visualization of task
of interest and secondly the symbol itself doesn't mean anything
because the sched-in of that symbol will not be printed(first sched-in
contains pid and the corresponding symbol).
When using the --task-name option, the sched-out time is represented
by a '*-'. Since not all task sched-in events are printed, the sched-out
time of the relevant task might be lost. This representation ensures
that the sched-out time of the interested task is not overlooked.
6.10.0-rc1
==========
*A0 131040.639793 secs A0 => migration/0:19
*. 131040.639801 secs . => swapper:0
. *B0 131040.639830 secs B0 => migration/1:24
. *. 131040.639836 secs
. . *C0 131040.640108 secs C0 => migration/2:30
. . *. 131040.640163 secs
. . . *D0 131040.640386 secs D0 => migration/3:36
. . . *. 131040.640395 secs
6.10.0-rc1 + patch (--task-name wdavdaemon)
=============
. *A0 . . . . - . 131040.641346 secs A0 => wdavdaemon:62509
. A0 *B0 . . . - . 131040.641378 secs B0 => wdavdaemon:62274
- *- B0 . . . - . 131040.641379 secs
*C0 . B0 . . . . . 131040.641572 secs C0 => wdavdaemon:62283
C0 . B0 . *D0 . . . 131040.641572 secs D0 => wdavdaemon:62277
C0 . B0 . D0 . *E0 . 131040.641578 secs E0 => wdavdaemon:62270
*- . B0 . D0 . E0 . 131040.641581 secs
. . B0 . D0 . *- . 131040.641583 secs
Reviewed-and-tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Chen Yu <yu.c.chen@intel.com>
Link: https://lore.kernel.org/r/20240707182716.22054-2-vineethr@linux.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Revert commit 90dc946059 ("selftests/bpf: DENYLIST.aarch64: Remove
fexit_sleep") again. The fix in 19d3c179a3 ("bpf, arm64: Fix trampoline
for BPF_TRAMP_F_CALL_ORIG") does not address all of the issues and BPF
CI is still hanging and timing out:
https://github.com/kernel-patches/bpf/actions/runs/9905842936/job/27366435436
[...]
#89/11 fexit_bpf2bpf/func_replace_global_func:OK
#89/12 fexit_bpf2bpf/fentry_to_cgroup_bpf:OK
#89/13 fexit_bpf2bpf/func_replace_progmap:OK
#89 fexit_bpf2bpf:OK
Error: The operation was canceled.
Thus more investigation work & fixing is needed before the test can be put
in place again.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/bpf/20240705145009.32340-1-puranjay@kernel.org
Andrew Jones <ajones@ventanamicro.com> says:
Zawrs provides two instructions (wrs.nto and wrs.sto), where both are
meant to allow the hart to enter a low-power state while waiting on a
store to a memory location. The instructions also both wait an
implementation-defined "short" duration (unless the implementation
terminates the stall for another reason). The difference is that while
wrs.sto will terminate when the duration elapses, wrs.nto, depending on
configuration, will either just keep waiting or an ILL exception will be
raised. Linux will use wrs.nto, so if platforms have an implementation
which falls in the "just keep waiting" category (which is not expected),
then it should _not_ advertise Zawrs in the hardware description.
Like wfi (and with the same {m,h}status bits to configure it), when
wrs.nto is configured to raise exceptions it's expected that the higher
privilege level will see the instruction was a wait instruction, do
something, and then resume execution following the instruction. For
example, KVM does configure exceptions for wfi (hstatus.VTW=1) and
therefore also for wrs.nto. KVM does this for wfi since it's better to
allow other tasks to be scheduled while a VCPU waits for an interrupt.
For waits such as those where wrs.nto/sto would be used, which are
typically locks, it is also a good idea for KVM to be involved, as it
can attempt to schedule the lock holding VCPU.
This series starts with Christoph's addition of the riscv
smp_cond_load_relaxed function which applies wrs.sto when available.
That patch has been reworked to use wrs.nto and to use the same approach
as Arm for the wait loop, since we can't have arbitrary C code between
the load-reserved and the wrs. Then, hwprobe support is added (since the
instructions are also usable from usermode), and finally KVM is
taught about wrs.nto, allowing guests to see and use the Zawrs
extension.
We still don't have test results from hardware, and it's not possible to
prove that using Zawrs is a win when testing on QEMU, not even when
oversubscribing VCPUs to guests. However, it is possible to use KVM
selftests to force a scenario where we can prove Zawrs does its job and
does it well. [4] is a test which does this and, on my machine, without
Zawrs it takes 16 seconds to complete and with Zawrs it takes 0.25
seconds.
This series is also available here [1]. In order to use QEMU for testing
a build with [2] is needed. In order to enable guests to use Zawrs with
KVM using kvmtool, the branch at [3] may be used.
[1] https://github.com/jones-drew/linux/commits/riscv/zawrs-v3/
[2] https://lore.kernel.org/all/20240312152901.512001-2-ajones@ventanamicro.com/
[3] https://github.com/jones-drew/kvmtool/commits/riscv/zawrs/
[4] cb2beccebc
Link: https://lore.kernel.org/r/20240426100820.14762-8-ajones@ventanamicro.com
* b4-shazam-merge:
KVM: riscv: selftests: Add Zawrs extension to get-reg-list test
KVM: riscv: Support guest wrs.nto
riscv: hwprobe: export Zawrs ISA extension
riscv: Add Zawrs support for spinlocks
dt-bindings: riscv: Add Zawrs ISA extension description
riscv: Provide a definition for 'pause'
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
KVM RISC-V allows the Zawrs extension for the Guest/VM, so add it
to the get-reg-list test.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240426100820.14762-14-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
1. Add ParaVirt steal time support.
2. Add some VM migration enhancement.
3. Add perf kvm-stat support for loongarch.
-----BEGIN PGP SIGNATURE-----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=DpIK
-----END PGP SIGNATURE-----
Merge tag 'loongarch-kvm-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD
LoongArch KVM changes for v6.11
1. Add ParaVirt steal time support.
2. Add some VM migration enhancement.
3. Add perf kvm-stat support for loongarch.
- Redirect AMO load/store access fault traps to guest
- Perf kvm stat support for RISC-V
- Use HW IMSIC guest files when available
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEZdn75s5e6LHDQ+f/rUjsVaLHLAcFAmaRDW4ACgkQrUjsVaLH
LAcU2Q/+IaL17M8D8ueOcbmCMqZRReyVdR9vH6q87E9NJYRH2dewZ656bNQnnU20
3hkbHOnF+NJAHJ0SfXwqNTVkJcQ8u+F3Xui4DlnFZ/lkpcWpvT/DRI5SCjIjiB/G
SS/xWaRoSjvVJ7M8SyQhHUb2Y/tiDRXOOEl59ROGAKjzC3SY5/NJJ6g5FeE5akT8
/Q7WisZmc+ZH+a9EEOnl+Do7AFakrlaFM5KnweamfqSlSFrQB12YNpSsmA16k6X9
fqK/xPQTjeNakdQDPKw8INCbXkt8dsnlrPS6ivL0FCVf38aIJK0jxyLk9JbZGBK8
+dGCJOLVJontEyOVTYheq2oWv40xAlkXDjLNbnz+Nf7Sau8evFBpE2mPnbUBoGZi
fu5UCddSw3CFwrFNM+qiBRPz/mNuUpCC4pCh8yJSCDZ374ew9ili2l3Nb2IvBcJ2
36lQuxlPVTPOv1J76/WtYwsSwaYBHHcBshweTJCkAkezp0d/wAE8bpaw3n4YnfSn
l4u8/rrnEBb3Cd9cbW1Vk77Vw5e02RlZY5T+JLj7TXWSAFzstYxMpLsf097tqqcn
vY1iTrpxTcJuY0Rra3SI05eKgliXI5snh08xlW2NiVxu8NjjZMU73b6tg3JX8FHl
DMCafyQUBueV2jCpwbYribpbWv/UuUl92AKyJOwZ76W/e9YVBLA=
=atJQ
-----END PGP SIGNATURE-----
Merge tag 'kvm-riscv-6.11-1' of https://github.com/kvm-riscv/linux into HEAD
KVM/riscv changes for 6.11
- Redirect AMO load/store access fault traps to guest
- Perf kvm stat support for RISC-V
- Use guest files for IMSIC virtualization, when available
ONE_REG support for the Zimop, Zcmop, Zca, Zcf, Zcd, Zcb and Zawrs ISA
extensions is coming through the RISC-V tree.
Add a test case to exercise KVM_PRE_FAULT_MEMORY and run the guest to access the
pre-populated area. It tests KVM_PRE_FAULT_MEMORY ioctl for KVM_X86_DEFAULT_VM
and KVM_X86_SW_PROTECTED_VM.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Message-ID: <32427791ef42e5efaafb05d2ac37fa4372715f47.1712785629.git.isaku.yamahata@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Log errors are the most widely used mechanism for reporting issues in
the kernel. When an error is logged using the device helpers, eg
dev_err(), it gets metadata attached that identifies the subsystem and
device where the message is coming from. Introduce a new test that makes
use of that metadata to report which devices logged errors (or more
critical messages).
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240705-dev-err-log-selftest-v2-3-163b9cd7b3c1@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the ksft python module, which provides generic helpers for
kselftests, to a common directory so it can be more easily shared
between different tests.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240705-dev-err-log-selftest-v2-2-163b9cd7b3c1@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the discoverable devices test to a subdirectory to allow other
related tests to be added to the devices directory.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240705-dev-err-log-selftest-v2-1-163b9cd7b3c1@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are a couple of places where the test script "sleep"s to wait for
some external condition to be met.
This is error prone, specially in slow systems (identified in CI by
"KSFT_MACHINE_SLOW=yes").
To fix this, add a "ovs_wait" function that tries to execute a command
a few times until it succeeds. The timeout used is set to 5s for
"normal" systems and doubled if a slow CI machine is detected.
This should make the following work:
$ vng --build \
--config tools/testing/selftests/net/config \
--config kernel/configs/debug.config
$ vng --run . --user root -- "make -C tools/testing/selftests/ \
KSFT_MACHINE_SLOW=yes TARGETS=net/openvswitch run_tests"
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Reviewed-by: Ilya Maximets <i.maximets@ovn.org>
Link: https://patch.msgid.link/20240710090500.1655212-1-amorenoz@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This avoids reported warnings when the packages are not installed.
[namhyung]: Removed the dummy assignment and unnecessary ifeq checks.
Fixes: 0f0e1f4456 ("perf build: Use pkg-config for feature check for libtrace{event,fs}")
Signed-off-by: Guilherme Amadio <amadio@gentoo.org>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Thorsten Leemhuis <linux@leemhuis.info>
Link: https://lore.kernel.org/r/20240628203432.3273625-1-amadio@gentoo.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cross-merge networking fixes after downstream PR.
Conflicts:
net/sched/act_ct.c
26488172b0 ("net/sched: Fix UAF when resolving a clash")
3abbd7ed8b ("act_ct: prepare for stolen verdict coming from conntrack and nat engine")
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The run_tags_test.sh script is used to run tags_test and print out if
the test succeeded or failed. As tags_test has been TAP conformed, this
script is unneeded and hence can be removed.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20240602132502.4186771-2-usama.anjum@collabora.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Conform the layout, informational and status messages to TAP. No
functional change is intended other than the layout of output messages.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20240602132502.4186771-1-usama.anjum@collabora.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
There are two selftest scenarios for ARRAY BIST(Board Integrated System
Test) tests:
1. Perform IFS ARRAY BIST tests once on each CPU.
2. Perform IFS ARRAY BIST tests on a random CPU with 3 rounds.
These are not meant to be exhaustive, but are some minimal tests for
for checking IFS ARRAY BIST.
Reviewed-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Co-developed-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Pengfei Xu <pengfei.xu@intel.com>
Acked-by: Jithu Joseph <jithu.joseph@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Two selftests are added to verify IFS scan test feature:
1. Perform IFS scan test once on each CPU using all the available image
files.
2. Perform IFS scan test with the default image on a random cpu for 3
rounds.
Reviewed-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Co-developed-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Pengfei Xu <pengfei.xu@intel.com>
Acked-by: Jithu Joseph <jithu.joseph@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Scan test image files have to be loaded before starting IFS test.
Verify that In Field scan driver is able to load valid test image files.
Also check if loading an invalid test image file fails.
Reviewed-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Co-developed-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Pengfei Xu <pengfei.xu@intel.com>
Acked-by: Jithu Joseph <jithu.joseph@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
IFS (In Field Scan) driver exposes its functionality via sysfs interfaces.
Applications prepare and exercise the tests by interacting with the
aforementioned sysfs files.
Verify that the necessary sysfs entries are created after loading the IFS
driver.
Initialize test variables needed for building subsequent kself-test cases.
Reviewed-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Co-developed-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Pengfei Xu <pengfei.xu@intel.com>
Acked-by: Jithu Joseph <jithu.joseph@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The variable are never referenced in the code, just remove it
that this problem was discovered by reading code
Signed-off-by: Zhu Jun <zhujun2@cmss.chinamobile.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This variable is never referenced in the code, just remove them
that this problem was discovered by reading the code
Signed-off-by: Zhu Jun <zhujun2@cmss.chinamobile.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
These warnings are all of the form, "the format specified a short
(signed or unsigned) int, but the value is a full length int".
Acked-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When building with clang, via:
make LLVM=1 -C tools/testing/selftests
...quite a few functions are variables are generating "unused" warnings.
Fix the warnings by deleting the unused items.
One item, the "nerrs" variable in vsdo_restorer.c's main(), is unused
but probably wants to be returned from main(), as a non-zero result.
That result is also unused right now, so another option would be to
delete it entirely, but this way, main() also gets fixed. It was missing
a return value.
Acked-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When building with clang, via:
make LLVM=1 -C tools/testing/selftests
...clang warns that -no-pie is "unused during compilation".
This occurs because clang only wants to see -no-pie during linking.
Here, we don't have a separate linking stage, so a compiler warning is
unavoidable without (wastefully) restructuring the Makefile.
Avoid the warning by simply disabling that warning, for clang builds.
Acked-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When building with clang, via:
make LLVM=1 -C tools/testing/selftests
...the build fails because clang's inline asm doesn't support all of the
features that are used in the asm() snippet in sysret_rip.c.
Fix this by moving the asm code into the clang_helpers_64.S file, where
it can be built with the assembler's full set of features.
Acked-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When building with clang, via:
make LLVM=1 -C tools/testing/selftests
Fix this by moving the inline asm to "pure" assembly, in two new files:
clang_helpers_32.S, clang_helpers_64.S.
As a bonus, the pure asm avoids the need for ifdefs, and is now very
simple and easy on the eyes.
Acked-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Use fisttps instead of fisttp to specify correctly that the output
variable is of size short.
test_FISTTP.c:28:3: error: ambiguous instructions require an explicit suffix (could be 'fisttps', or 'fisttpl')
28 | " fisttp res16""\n"
| ^
<inline asm>:3:2: note: instantiated into assembly here
3 | fisttp res16
| ^
...followed by three more cases of the same warning for other lines.
[jh: removed a bit of duplication from the warnings report, above, and
fixed a typo in the title]
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When building with clang, via:
make LLVM=1 -C tools/testing/selftests
...the following build failure occurs in selftests/x86:
clang: error: cannot specify -o when generating multiple output files
This happens because, although gcc doesn't complain if you invoke it
like this:
gcc file1.c header2.h
...clang won't accept that form--it rejects the .h file(s). Also, the
above approach is inaccurate anyway, because file.c includes header2.h
in this case, and the inclusion of header2.h on the invocation is an
artifact of the Makefile's desire to maintain dependencies.
In Makefiles of this type, a better way to do it is to use Makefile
dependencies to trigger the appropriate incremental rebuilds, and
separately use file lists (see EXTRA_FILES in this commit) to track what
to pass to the compiler.
This commit splits those concepts up, by setting up both EXTRA_FILES and
the Makefile dependencies with a single call to the new Makefile
function extra-files.
That fixes the build failure, while still providing the correct
dependencies in all cases.
Acked-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When building with clang, via:
make LLVM=1 -C tools/testing/selftest
...clang warns about an unused irqcount variable. clang is correct: the
variable is incremented and then ignored.
Fix this by deleting the irqcount variable.
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: John Stultz <jstultz@google.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
write_bm_pid_to_resctrl() uses resctrl_val to check test name which is
not a good interface generic resctrl FS functions should provide.
Tests define mongrp when needed. Remove the test name check in
write_bm_pid_to_resctrl() to only rely on the mongrp parameter being
non-NULL.
Remove write_bm_pid_to_resctrl() resctrl_val parameter and resctrl_val
member from the struct resctrl_val_param that are not used anymore.
Similarly, remove the test name constants that are no longer used.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The CMT selftest instantiates a monitor group to read LLC occupancy.
Since the test also creates a control group, it is unnecessary to
create another one for monitoring because control groups already
provide monitoring too.
Remove the unnecessary monitor group from the CMT selftest.
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Nothing during MBA test uses mongrp even if it has been defined ever
since the introduction of the MBA test in the commit 01fee6b4d1
("selftests/resctrl: Add MBA test").
Remove the mongrp from MBA test.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The struct resctrl_val_param has control and monitor groups as char
arrays but they are not supposed to be mutated within resctrl_val().
Convert the ctrlgrp and mongrp char array within resctrl_val_param to
plain const char pointers and adjust the strlen() based checks to
check NULL instead.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Control group, monitor group and resctrl_val are not mutated and
should not be mutated within resctrlfs.c functions.
Mark this by using const char * for the arguments.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
bw_report is only needed for selecting the correct value from the
values IMC measured. It is a member in the resctrl_val_param struct and
is always set to "reads". The value is then checked in resctrl_val()
using validate_bw_report_request() that besides validating the input,
assumes it can mutate the string which is questionable programming
practice.
Simplify handling bw_report:
- Convert validate_bw_report_request() into get_bw_report_type() that
inputs and returns const char *. Use NULL to indicate error.
- Validate the report types inside measure_mem_bw(), not in
resctrl_val().
- Pass bw_report to measure_mem_bw() from ->measure() hook because
resctrl_val() no longer needs bw_report for anything.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The struct resctrl_val_param is there to customize behavior inside
resctrl_val() which is currently not used to full extent and there are
number of strcmp()s for test name in resctrl_val done by resctrl_val().
Create ->init() hook into the struct resctrl_val_param to cleanly
do per test initialization.
Remove also unused branches to setup paths and the related #defines
for CMT test.
While touching kerneldoc, make the adjacent line consistent with the
newly added form (callback vs call back).
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The measurement done in resctrl_val() varies depending on test type.
The decision for how to measure is decided based on the string compare
to test name which is quite inflexible.
Add ->measure() callback into the struct resctrl_val_param to allow
each test to provide necessary code as a function which simplifies what
resctrl_val() has to do.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
initialize_mem_bw_resctrl() and set_mbm_path() contain complicated set
of conditions, each yielding different file to be opened to measure
memory bandwidth through resctrl FS. In practice, only two of them are
used. For MBA test, ctrlgrp is always provided, and for MBM test both
ctrlgrp and mongrp are set.
The file used differ between MBA/MBM test, however, MBM test
unnecessarily create monitor group because resctrl FS already provides
monitoring interface underneath any ctrlgrp too, which is what the MBA
selftest uses.
Consolidate memory bandwidth file used to the one used by the MBA
selftest. Remove all unused branches opening other files to simplify
the code.
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
measure_vals() is awfully generic name so rename it to measure_mem_bw()
to describe better what it does and document the function parameters.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
'bm_pid' and 'ppid' are global variables. As they are used by different
processes and in signal handler, they cannot be entirely converted into
local variables.
The scope of those variables can still be reduced into resctrl_val.c
only. As PARENT_EXIT() macro is using 'ppid', make it a function in
resctrl_val.c and pass ppid to it as an argument because it is easier
to understand than using the global variable directly.
Pass 'bm_pid' into measure_vals() instead of relying on the global
variable which helps to make the call signatures of measure_vals() and
measure_llc_resctrl() more similar to each other.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
A few functions receive PIDs through int arguments. PIDs variables
should be of type pid_t, not int.
Convert pid arguments from int to pid_t.
Before printing PID, match the type to %d by casting to int which is
enough for Linux (standard would allow using a longer integer type but
generalizing for that would complicate the code unnecessarily, the
selftest code does not need to be portable).
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Both initialize_mem_bw_resctrl() and initialize_llc_occu_resctrl() that
are called from resctrl_val() need to determine domain ID to construct
resctrl fs related paths. Both functions do it by taking CPU ID which
neither needs for any other purpose than determining the domain ID.
Consolidate determining the domain ID into resctrl_val() and pass the
domain ID instead of CPU ID to initialize_mem_bw_resctrl() and
initialize_llc_occu_resctrl().
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Resctrl selftests refer to "bandwidth" currently in two other forms in
the code ("B/W" and "band width").
Use "bandwidth" consistently everywhere. While at it, fix also one
"over flow" -> "overflow" on a line that is touched by the change.
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
For MBM/MBA tests, measure_vals() calls get_mem_bw_imc() that performs
the measurement over a duration of sleep(1) call. The memory bandwidth
numbers from IMC are derived over this duration. The resctrl FS derived
memory bandwidth, however, is calculated inside measure_vals() and only
takes delta between the previous value and the current one which
besides the actual test, also samples inter-test noise.
Rework the logic in measure_vals() and get_mem_bw_imc() such that the
resctrl FS memory bandwidth section covers much shorter duration
closely matching that of the IMC perf counters to improve measurement
accuracy.
For the second read after rewind() to return a fresh value, also
newline has to be consumed by the fscanf().
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The imc perf fd close() calls are missing from all error paths. In
addition, get_mem_bw_imc() handles fds in a for loop but close() is
based on two fixed indexes READ and WRITE.
Open code inner for loops to READ+WRITE entries for clarity and add a
function to close() IMC fds properly in all cases.
Fixes: 7f4d257e3a ("selftests/resctrl: Add callback to start a benchmark")
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
There are extra spaces in the middle of #define. It is recommended
to delete the spaces to make the code look more comfortable.
Signed-off-by: aigourensheng <shechenglong001@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
gcc defaults to silence (off) for the following warnings, but clang
defaults to the opposite. The warnings are not useful for the kernel
itself, which is why they have remained disabled in gcc for the main
kernel build. And it is only due to including kernel data structures in
the selftests, that we get the warnings from clang.
-Waddress-of-packed-member
-Wgnu-variable-sized-type-not-at-end
In other words, the warnings are not unique to the selftests: there is
nothing that the selftests' code does that triggers these warnings,
other than the act of including the kernel's data structures. Therefore,
silence them for the clang builds as well.
This eliminates warnings for the net/ and user_events/ kselftest
subsystems, in these files:
./net/af_unix/scm_rights.c
./net/timestamping.c
./net/ipsec.c
./user_events/perf_test.c
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Current release - regressions:
- core: fix rc7's __skb_datagram_iter() regression
Current release - new code bugs:
- eth: bnxt: fix crashes when reducing ring count with active RSS contexts
Previous releases - regressions:
- sched: fix UAF when resolving a clash
- skmsg: skip zero length skb in sk_msg_recvmsg2
- sunrpc: fix kernel free on connection failure in xs_tcp_setup_socket
- tcp: avoid too many retransmit packets
- tcp: fix incorrect undo caused by DSACK of TLP retransmit
- udp: Set SOCK_RCU_FREE earlier in udp_lib_get_port().
- eth: ks8851: fix deadlock with the SPI chip variant
- eth: i40e: fix XDP program unloading while removing the driver
Previous releases - always broken:
- bpf:
- fix too early release of tcx_entry
- fail bpf_timer_cancel when callback is being cancelled
- bpf: fix order of args in call to bpf_map_kvcalloc
- netfilter: nf_tables: prefer nft_chain_validate
- ppp: reject claimed-as-LCP but actually malformed packets
- wireguard: avoid unaligned 64-bit memory accesses
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=qwVA
-----END PGP SIGNATURE-----
Merge tag 'net-6.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf and netfilter.
Current release - regressions:
- core: fix rc7's __skb_datagram_iter() regression
Current release - new code bugs:
- eth: bnxt: fix crashes when reducing ring count with active RSS
contexts
Previous releases - regressions:
- sched: fix UAF when resolving a clash
- skmsg: skip zero length skb in sk_msg_recvmsg2
- sunrpc: fix kernel free on connection failure in
xs_tcp_setup_socket
- tcp: avoid too many retransmit packets
- tcp: fix incorrect undo caused by DSACK of TLP retransmit
- udp: Set SOCK_RCU_FREE earlier in udp_lib_get_port().
- eth: ks8851: fix deadlock with the SPI chip variant
- eth: i40e: fix XDP program unloading while removing the driver
Previous releases - always broken:
- bpf:
- fix too early release of tcx_entry
- fail bpf_timer_cancel when callback is being cancelled
- bpf: fix order of args in call to bpf_map_kvcalloc
- netfilter: nf_tables: prefer nft_chain_validate
- ppp: reject claimed-as-LCP but actually malformed packets
- wireguard: avoid unaligned 64-bit memory accesses"
* tag 'net-6.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (33 commits)
net, sunrpc: Remap EPERM in case of connection failure in xs_tcp_setup_socket
net/sched: Fix UAF when resolving a clash
net: ks8851: Fix potential TX stall after interface reopen
udp: Set SOCK_RCU_FREE earlier in udp_lib_get_port().
netfilter: nf_tables: prefer nft_chain_validate
netfilter: nfnetlink_queue: drop bogus WARN_ON
ethtool: netlink: do not return SQI value if link is down
ppp: reject claimed-as-LCP but actually malformed packets
selftests/bpf: Add timer lockup selftest
net: ethernet: mtk-star-emac: set mac_managed_pm when probing
e1000e: fix force smbus during suspend flow
tcp: avoid too many retransmit packets
bpf: Defer work in bpf_timer_cancel_and_free
bpf: Fail bpf_timer_cancel when callback is being cancelled
bpf: fix order of args in call to bpf_map_kvcalloc
net: ethernet: lantiq_etop: fix double free in detach
i40e: Fix XDP program unloading while removing the driver
net: fix rc7's __skb_datagram_iter()
net: ks8851: Fix deadlock with the SPI chip variant
octeontx2-af: Fix incorrect value output on error path in rvu_check_rsrc_availability()
...
Add a selftest that tries to trigger a situation where two timer callbacks
are attempting to cancel each other's timer. By running them continuously,
we hit a condition where both run in parallel and cancel each other.
Without the fix in the previous patch, this would cause a lockup as
hrtimer_cancel on either side will wait for forward progress from the
callback.
Ensure that this situation leads to a EDEADLK error.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240711052709.2148616-1-memxor@gmail.com
If bpf_object__load() fails in test_xdp_adjust_frags_tail_grow(), "obj"
opened before this should be closed. So use "goto out" to close it instead
of using "return" here.
Fixes: 110221081a ("bpf: selftests: update xdp_adjust_tail selftest to include xdp frags")
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/f282a1ed2d0e3fb38cceefec8e81cabb69cab260.1720615848.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Run bpf_tcp_ca selftests (./test_progs -t bpf_tcp_ca) on a Loongarch
platform, some "Segmentation fault" errors occur:
'''
test_dctcp:PASS:bpf_dctcp__open_and_load 0 nsec
test_dctcp:FAIL:bpf_map__attach_struct_ops unexpected error: -524
#29/1 bpf_tcp_ca/dctcp:FAIL
test_cubic:PASS:bpf_cubic__open_and_load 0 nsec
test_cubic:FAIL:bpf_map__attach_struct_ops unexpected error: -524
#29/2 bpf_tcp_ca/cubic:FAIL
test_dctcp_fallback:PASS:dctcp_skel 0 nsec
test_dctcp_fallback:PASS:bpf_dctcp__load 0 nsec
test_dctcp_fallback:FAIL:dctcp link unexpected error: -524
#29/4 bpf_tcp_ca/dctcp_fallback:FAIL
test_write_sk_pacing:PASS:open_and_load 0 nsec
test_write_sk_pacing:FAIL:attach_struct_ops unexpected error: -524
#29/6 bpf_tcp_ca/write_sk_pacing:FAIL
test_update_ca:PASS:open 0 nsec
test_update_ca:FAIL:attach_struct_ops unexpected error: -524
settcpca:FAIL:setsockopt unexpected setsockopt: \
actual -1 == expected -1
(network_helpers.c:99: errno: No such file or directory) \
Failed to call post_socket_cb
start_test:FAIL:start_server_str unexpected start_server_str: \
actual -1 == expected -1
test_update_ca:FAIL:ca1_ca1_cnt unexpected ca1_ca1_cnt: \
actual 0 <= expected 0
#29/9 bpf_tcp_ca/update_ca:FAIL
#29 bpf_tcp_ca:FAIL
Caught signal #11!
Stack trace:
./test_progs(crash_handler+0x28)[0x5555567ed91c]
linux-vdso.so.1(__vdso_rt_sigreturn+0x0)[0x7ffffee408b0]
./test_progs(bpf_link__update_map+0x80)[0x555556824a78]
./test_progs(+0x94d68)[0x5555564c4d68]
./test_progs(test_bpf_tcp_ca+0xe8)[0x5555564c6a88]
./test_progs(+0x3bde54)[0x5555567ede54]
./test_progs(main+0x61c)[0x5555567efd54]
/usr/lib64/libc.so.6(+0x22208)[0x7ffff2aaa208]
/usr/lib64/libc.so.6(__libc_start_main+0xac)[0x7ffff2aaa30c]
./test_progs(_start+0x48)[0x55555646bca8]
Segmentation fault
'''
This is because BPF trampoline is not implemented on Loongarch yet,
"link" returned by bpf_map__attach_struct_ops() is NULL. test_progs
crashs when this NULL link passes to bpf_link__update_map(). This
patch adds NULL checks for all links in bpf_tcp_ca to fix these errors.
If "link" is NULL, goto the newly added label "out" to destroy the skel.
v2:
- use "goto out" instead of "return" as Eduard suggested.
Fixes: 06da9f3bd6 ("selftests/bpf: Test switching TCP Congestion Control algorithms.")
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/r/b4c841492bd4ed97964e4e61e92827ce51bf1dc9.1720615848.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
CONFIG_MEMCG_KMEM used to be a user-visible option for whether slab
tracking is enabled. It has been default-enabled and equivalent to
CONFIG_MEMCG for almost a decade. We've only grown more kernel memory
accounting sites since, and there is no imaginable cgroup usecase going
forward that wants to track user pages but not the multitude of
user-drivable kernel allocations.
Link: https://lkml.kernel.org/r/20240701153148.452230-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Centralize the _GNU_SOURCE definition to CFLAGS in lib.mk. Remove
redundant defines from Makefiles that import lib.mk. Convert any usage of
"#define _GNU_SOURCE 1" to "#define _GNU_SOURCE".
This uses the form "-D_GNU_SOURCE=", which is equivalent to
"#define _GNU_SOURCE".
Otherwise using "-D_GNU_SOURCE" is equivalent to "-D_GNU_SOURCE=1" and
"#define _GNU_SOURCE 1", which is less commonly seen in source code and
would require many changes in selftests to avoid redefinition warnings.
Link: https://lkml.kernel.org/r/20240625223454.1586259-2-edliaw@google.com
Signed-off-by: Edward Liaw <edliaw@google.com>
Suggested-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: André Almeida <andrealmeid@igalia.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Kees Cook <kees@kernel.org>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Both Ryan and Chris have been utilizing the small test program to aid in
debugging and identifying issues with swap entry allocation. While a real
or intricate workload might be more suitable for assessing the correctness
and effectiveness of the swap allocation policy, a small test program
presents a simpler means of understanding the problem and initially
verifying the improvements being made.
Let's endeavor to integrate it into tools/mm. Although it presently only
accommodates 64KB and 4KB, I'm optimistic that we can expand its
capabilities to support multiple sizes and simulate more complex systems
in the future as required.
Basically, we have
1. Use MADV_PAGEPUT for rapid swap-out, putting the swap allocation
code under high exercise in a short time.
2. Use MADV_DONTNEED to simulate the behavior of libc and Java heap in
freeing memory, as well as for munmap, app exits, or OOM killer
scenarios. This ensures new mTHP is always generated, released or
swapped out, similar to the behavior on a PC or Android phone where
many applications are frequently started and terminated.
3. Swap in with or without the "-a" option to observe how fragments
due to swap-in and the incoming swap-in of large folios will impact
swap-out fallback.
Due to 2, we ensure a certain proportion of mTHP. Similarly, because of
3, we maintain a certain proportion of small folios, as we don't support
large folios swap-in, meaning any swap-in will immediately result in small
folios. Therefore, with both 2 and 3, we automatically achieve a system
containing both mTHP and small folios. Additionally, 1 provides the
ability to continuously swap them out.
We can also use "-s" to add a dedicated small folios memory area.
[akpm@linux-foundation.org: thp_swap_allocator_test.c needs mman.h, per Kairui Song]
Link: https://lkml.kernel.org/r/20240622071231.576056-2-21cnbao@gmail.com
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Acked-by: Chris Li <chrisl@kernel.org>
Tested-by: Chris Li <chrisl@kernel.org>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Tested-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kairui Song <kasong@tencent.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This patch uses public helper connect_fd_to_fd() exported in
network_helpers.h instead of using getsockname() + connect() in
run_lookup_prog() in prog_tests/sk_lookup.c. This can simplify
the code.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/7077c277cde5a1864cdc244727162fb75c8bb9c5.1720515893.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
This patch uses public helper start_server_addr() in udp_recv_send()
in prog_tests/sk_lookup.c to simplify the code.
And use ASSERT_OK_FD() to check fd returned by start_server_addr().
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/f11cabfef4a2170ecb66a1e8e2e72116d8f621b3.1720515893.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
This patch uses public helper start_server_str() to simplify make_server()
in prog_tests/sk_lookup.c.
Add a callback setsockopts() to do all sockopts, set it to post_socket_cb
pointer of struct network_helper_opts. And add a new struct cb_opts to save
the data needed to pass to the callback. Then pass this network_helper_opts
to start_server_str().
Also use ASSERT_OK_FD() to check fd returned by start_server_str().
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/5981539f5591d2c4998c962ef2bf45f34c940548.1720515893.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
In the error path when update_lookup_map() fails in drop_on_reuseport in
prog_tests/sk_lookup.c, "server1", the fd of server 1, should be closed.
This patch fixes this by using "goto close_srv1" lable instead of "detach"
to close "server1" in this case.
Fixes: 0ab5539f85 ("selftests/bpf: Tests for BPF_SK_LOOKUP attach point")
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/86aed33b4b0ea3f04497c757845cff7e8e621a2d.1720515893.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Add a new dedicated ASSERT macro ASSERT_OK_FD to test whether a socket
FD is valid or not. It can be used to replace macros ASSERT_GT(fd, 0, ""),
ASSERT_NEQ(fd, -1, "") or statements (fd < 0), (fd != -1).
Suggested-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/ded75be86ac630a3a5099739431854c1ec33f0ea.1720515893.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Some callers expect __start_server() helper to pass their own "backlog"
value to listen() instead of the default of 1. So this patch adds struct
member "backlog" for network_helper_opts to allow callers to set "backlog"
value via start_server_str() helper.
listen(fd, 0 /* backlog */) can be used to enforce syncookie. Meaning
backlog 0 is a legit value.
Using 0 as a default and changing it to 1 here is fine. It makes the test
program easier to write for the common case. Enforcing syncookie mode by
using backlog 0 is a niche use case but it should at least have a way for
the caller to do that. Thus, -ve backlog value is used here for the
syncookie use case. Please see the comment in network_helpers.h for
the details.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/1660229659b66eaad07aa2126e9c9fe217eba0dd.1720515893.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
In many cases, kernel netfilter functionality is built as modules.
If CONFIG_NF_FLOW_TABLE=m in particular, progs/xdp_flowtable.c
(and hence selftests) will fail to compile, so add a ___local
version of "struct flow_ports".
Fixes: c77e572d3a ("selftests/bpf: Add selftest for bpf_xdp_flow_lookup kfunc")
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/r/20240710150051.192598-1-alan.maguire@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When clone3() was introduced, it was not obvious how each architecture
deals with setting up the stack and keeping the register contents in
a fork()-like system call, so this was left for the architecture
maintainers to implement, with __ARCH_WANT_SYS_CLONE3 defined by those
that already implement it.
Five years later, we still have a few architectures left that are missing
clone3(), and the macro keeps getting in the way as it's fundamentally
different from all the other __ARCH_WANT_SYS_* macros that are meant
to provide backwards-compatibility with applications using older
syscalls that are no longer provided by default.
Address this by reversing the polarity of the macro, adding an
__ARCH_BROKEN_SYS_CLONE3 macro to all architectures that don't
already provide the syscall, and remove __ARCH_WANT_SYS_CLONE3
from all the other ones.
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Currently, BPF kfuncs which accept trusted pointer arguments
i.e. those flagged as KF_TRUSTED_ARGS, KF_RCU, or KF_RELEASE, all
require an original/unmodified trusted pointer argument to be supplied
to them. By original/unmodified, it means that the backing register
holding the trusted pointer argument that is to be supplied to the BPF
kfunc must have its fixed offset set to zero, or else the BPF verifier
will outright reject the BPF program load. However, this zero fixed
offset constraint that is currently enforced by the BPF verifier onto
BPF kfuncs specifically flagged to accept KF_TRUSTED_ARGS or KF_RCU
trusted pointer arguments is rather unnecessary, and can limit their
usability in practice. Specifically, it completely eliminates the
possibility of constructing a derived trusted pointer from an original
trusted pointer. To put it simply, a derived pointer is a pointer
which points to one of the nested member fields of the object being
pointed to by the original trusted pointer.
This patch relaxes the zero fixed offset constraint that is enforced
upon BPF kfuncs which specifically accept KF_TRUSTED_ARGS, or KF_RCU
arguments. Although, the zero fixed offset constraint technically also
applies to BPF kfuncs accepting KF_RELEASE arguments, relaxing this
constraint for such BPF kfuncs has subtle and unwanted
side-effects. This was discovered by experimenting a little further
with an initial version of this patch series [0]. The primary issue
with relaxing the zero fixed offset constraint on BPF kfuncs accepting
KF_RELEASE arguments is that it'd would open up the opportunity for
BPF programs to supply both trusted pointers and derived trusted
pointers to them. For KF_RELEASE BPF kfuncs specifically, this could
be problematic as resources associated with the backing pointer could
be released by the backing BPF kfunc and cause instabilities for the
rest of the kernel.
With this new fixed offset semantic in-place for BPF kfuncs accepting
KF_TRUSTED_ARGS and KF_RCU arguments, we now have more flexibility
when it comes to the BPF kfuncs that we're able to introduce moving
forward.
Early discussions covering the possibility of relaxing the zero fixed
offset constraint can be found using the link below. This will provide
more context on where all this has stemmed from [1].
Notably, pre-existing tests have been updated such that they provide
coverage for the updated zero fixed offset
functionality. Specifically, the nested offset test was converted from
a negative to positive test as it was already designed to assert zero
fixed offset semantics of a KF_TRUSTED_ARGS BPF kfunc.
[0] https://lore.kernel.org/bpf/ZnA9ndnXKtHOuYMe@google.com/
[1] https://lore.kernel.org/bpf/ZhkbrM55MKQ0KeIV@google.com/
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20240709210939.1544011-1-mattbobrowski@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Improve how we handle old BPF skeletons when it comes to BPF map
auto-attachment. Emit one warn-level message per each struct_ops map
that could have been auto-attached, if user provided recent enough BPF
skeleton version. Don't spam log if there are no relevant struct_ops
maps, though.
This should help users realize that they probably need to regenerate BPF
skeleton header with more recent bpftool/libbpf-cargo (or whatever other
means of BPF skeleton generation).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240708204540.4188946-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
BPF skeleton was designed from day one to be extensible. Generated BPF
skeleton code specifies actual sizes of map/prog/variable skeletons for
that reason and libbpf is supposed to work with newer/older versions
correctly.
Unfortunately, it was missed that we implicitly embed hard-coded most
up-to-date (according to libbpf's version of libbpf.h header used to
compile BPF skeleton header) sizes of those structs, which can differ
from the actual sizes at runtime when libbpf is used as a shared
library.
We have a few places were we just index array of maps/progs/vars, which
implicitly uses these potentially invalid sizes of structs.
This patch aims to fix this problem going forward. Once this lands,
we'll backport these changes in Github repo to create patched releases
for older libbpfs.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Fixes: d66562fba1 ("libbpf: Add BPF object skeleton support")
Fixes: 430025e5dc ("libbpf: Add subskeleton scaffolding")
Fixes: 08ac454e25 ("libbpf: Auto-attach struct_ops BPF maps in BPF skeleton")
Co-developed-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240708204540.4188946-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Old versions of libbpf don't handle varying sizes of bpf_map_skeleton
struct correctly. As such, BPF skeleton generated by newest bpftool
might not be compatible with older libbpf (though only when libbpf is
used as a shared library), even though it, by design, should.
Going forward libbpf will be fixed, plus we'll release bug fixed
versions of relevant old libbpfs, but meanwhile try to mitigate from
bpftool side by conservatively assuming older and smaller definition of
bpf_map_skeleton, if possible. Meaning, if there are no struct_ops maps.
If there are struct_ops, then presumably user would like to have
auto-attaching logic and struct_ops map link placeholders, so use the
full bpf_map_skeleton definition in that case.
Acked-by: Quentin Monnet <qmo@kernel.org>
Co-developed-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240708204540.4188946-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Some workloads may want to rehash the flows in response to an imbalance.
Most effective way to do that is changing the RSS key. Check that changing
the key does not cause link flaps or traffic disruption.
Disrupting traffic for key update is not incorrect, but makes the key
update unusable for rehashing under load.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240708213627.226025-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some devices dynamically increase and decrease the size of the RSS
indirection table based on the number of enabled queues.
When that happens driver must maintain the balance of entries
(preferably duplicating the smaller table).
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240708213627.226025-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
By default main RSS table should change to include all queues.
When user sets a specific RSS config the driver should preserve it,
even when queue count changes. Driver should refuse to deactivate
queues used in the user-set RSS config.
For additional contexts driver should still refuse to deactivate
queues in use. Whether the contexts should get resized like
context 0 when queue count increases is a bit unclear. I anticipate
most drivers today don't do that. Since main use case for additional
contexts is to set the indir table - it doesn't seem worthwhile to
care about behavior of the default table too much. Don't test that.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240708213627.226025-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Wrap up sending traffic and checking in which queues it landed
in a helper.
The method used for testing is to send a lot of iperf traffic
and check which queues received the most packets. Those should
be the queues where we expect iperf to land - either because we
installed a filter for the port iperf uses, or we didn't and
expect it to use context 0.
Contexts get disjoint queue sets, but the main context (AKA context 0)
may receive some background traffic (noise).
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240708213627.226025-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The basic test may fail without resetting the RSS indir table.
Use the .exec() method to run cleanup early since we re-test
with traffic that returning to default state works.
While at it reformat the doc a tiny bit.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240708213627.226025-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ageing time used by the test is too short for debug kernels and
results in entries being aged out prematurely [1].
Fix by increasing the ageing time.
The same change was done for the VLAN-aware version of the test in
commit dfbab74044 ("selftests: forwarding: Make vxlan-bridge-1q pass
on debug kernels").
[1]
# ./vxlan_bridge_1d.sh
[...]
# TEST: VXLAN: flood before learning [ OK ]
# TEST: VXLAN: show learned FDB entry [ OK ]
# TEST: VXLAN: learned FDB entry [FAIL]
# veth3: Expected to capture 0 packets, got 4.
# RTNETLINK answers: No such file or directory
# TEST: VXLAN: deletion of learned FDB entry [ OK ]
# TEST: VXLAN: Ageing of learned FDB entry [FAIL]
# veth3: Expected to capture 0 packets, got 2.
[...]
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240707095458.2870260-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lu Baolu says:
====================
This series implements the functionality of delivering IO page faults to
user space through the IOMMUFD framework. One feasible use case is the
nested translation. Nested translation is a hardware feature that supports
two-stage translation tables for IOMMU. The second-stage translation table
is managed by the host VMM, while the first-stage translation table is
owned by user space. This allows user space to control the IOMMU mappings
for its devices.
When an IO page fault occurs on the first-stage translation table, the
IOMMU hardware can deliver the page fault to user space through the
IOMMUFD framework. User space can then handle the page fault and respond
to the device top-down through the IOMMUFD. This allows user space to
implement its own IO page fault handling policies.
User space application that is capable of handling IO page faults should
allocate a fault object, and bind the fault object to any domain that it
is willing to handle the fault generatd for them. On a successful return
of fault object allocation, the user can retrieve and respond to page
faults by reading or writing to the file descriptor (FD) returned.
The iommu selftest framework has been updated to test the IO page fault
delivery and response functionality.
====================
* iommufd_pri:
iommufd/selftest: Add coverage for IOPF test
iommufd/selftest: Add IOPF support for mock device
iommufd: Associate fault object with iommufd_hw_pgtable
iommufd: Fault-capable hwpt attach/detach/replace
iommufd: Add iommufd fault object
iommufd: Add fault and response message definitions
iommu: Extend domain attach group with handle support
iommu: Add attach handle to struct iopf_group
iommu: Remove sva handle list
iommu: Introduce domain attachment handle
Link: https://lore.kernel.org/all/20240702063444.105814-1-baolu.lu@linux.intel.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Extend the selftest tool to add coverage of testing IOPF handling. This
would include the following tests:
- Allocating and destroying an iommufd fault object.
- Allocating and destroying an IOPF-capable HWPT.
- Attaching/detaching/replacing an IOPF-capable HWPT on a device.
- Triggering an IOPF on the mock device.
- Retrieving and responding to the IOPF through the file interface.
Link: https://lore.kernel.org/r/20240702063444.105814-11-baolu.lu@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This kselftest fixes update for Linux 6.10 consists of fixes to clang
build failures to timerns, vDSO tests and fixes to vDSO makefile.
-----BEGIN PGP SIGNATURE-----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=c2zt
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-fixes-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan
"Fixes to clang build failures to timerns, vDSO tests and fixes to vDSO
makefile"
* tag 'linux_kselftest-fixes-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/vDSO: remove duplicate compiler invocations from Makefile
selftests/vDSO: remove partially duplicated "all:" target in Makefile
selftests/vDSO: fix clang build errors and warnings
selftest/timerns: fix clang build failures for abs() calls
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZoxN0AAKCRDbK58LschI
g0c5AQDa3ZV9gfbN42y1zSDoM1uOgO60fb+ydxyOYh8l3+OiQQD/fLfpTY3gBFSY
9yi/pZhw/QdNzQskHNIBrHFGtJbMxgs=
=p1Zz
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-07-08
The following pull-request contains BPF updates for your *net-next* tree.
We've added 102 non-merge commits during the last 28 day(s) which contain
a total of 127 files changed, 4606 insertions(+), 980 deletions(-).
The main changes are:
1) Support resilient split BTF which cuts down on duplication and makes BTF
as compact as possible wrt BTF from modules, from Alan Maguire & Eduard Zingerman.
2) Add support for dumping kfunc prototypes from BTF which enables both detecting
as well as dumping compilable prototypes for kfuncs, from Daniel Xu.
3) Batch of s390x BPF JIT improvements to add support for BPF arena and to implement
support for BPF exceptions, from Ilya Leoshkevich.
4) Batch of riscv64 BPF JIT improvements in particular to add 12-argument support
for BPF trampolines and to utilize bpf_prog_pack for the latter, from Pu Lehui.
5) Extend BPF test infrastructure to add a CHECKSUM_COMPLETE validation option
for skbs and add coverage along with it, from Vadim Fedorenko.
6) Inline bpf_get_current_task/_btf() helpers in the arm64 BPF JIT which gives
a small 1% performance improvement in micro-benchmarks, from Puranjay Mohan.
7) Extend the BPF verifier to track the delta between linked registers in order
to better deal with recent LLVM code optimizations, from Alexei Starovoitov.
8) Fix bpf_wq_set_callback_impl() kfunc signature where the third argument should
have been a pointer to the map value, from Benjamin Tissoires.
9) Extend BPF selftests to add regular expression support for test output matching
and adjust some of the selftest when compiled under gcc, from Cupertino Miranda.
10) Simplify task_file_seq_get_next() and remove an unnecessary loop which always
iterates exactly once anyway, from Dan Carpenter.
11) Add the capability to offload the netfilter flowtable in XDP layer through
kfuncs, from Florian Westphal & Lorenzo Bianconi.
12) Various cleanups in networking helpers in BPF selftests to shave off a few
lines of open-coded functions on client/server handling, from Geliang Tang.
13) Properly propagate prog->aux->tail_call_reachable out of BPF verifier, so
that x86 JIT does not need to implement detection, from Leon Hwang.
14) Fix BPF verifier to add a missing check_func_arg_reg_off() to prevent an
out-of-bounds memory access for dynpointers, from Matt Bobrowski.
15) Fix bpf_session_cookie() kfunc to return __u64 instead of long pointer as
it might lead to problems on 32-bit archs, from Jiri Olsa.
16) Enhance traffic validation and dynamic batch size support in xsk selftests,
from Tushar Vyavahare.
bpf-next-for-netdev
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (102 commits)
selftests/bpf: DENYLIST.aarch64: Remove fexit_sleep
selftests/bpf: amend for wrong bpf_wq_set_callback_impl signature
bpf: helpers: fix bpf_wq_set_callback_impl signature
libbpf: Add NULL checks to bpf_object__{prev_map,next_map}
selftests/bpf: Remove exceptions tests from DENYLIST.s390x
s390/bpf: Implement exceptions
s390/bpf: Change seen_reg to a mask
bpf: Remove unnecessary loop in task_file_seq_get_next()
riscv, bpf: Optimize stack usage of trampoline
bpf, devmap: Add .map_alloc_check
selftests/bpf: Remove arena tests from DENYLIST.s390x
selftests/bpf: Add UAF tests for arena atomics
selftests/bpf: Introduce __arena_global
s390/bpf: Support arena atomics
s390/bpf: Enable arena
s390/bpf: Support address space cast instruction
s390/bpf: Support BPF_PROBE_MEM32
s390/bpf: Land on the next JITed instruction after exception
s390/bpf: Introduce pre- and post- probe functions
s390/bpf: Get rid of get_probe_mem_regno()
...
====================
Link: https://patch.msgid.link/20240708221438.10974-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
These addresses the performance issues reported by Matt, Namhyung and
Linus. Recently it changed processing comm string and DSO with sorted
arrays but it required to sort the array whenever it adds a new entry.
This caused a performance issue and fix is to enhance the sorting by
finding the insertion point in the sorted array and to shift righthand
side using memmove().
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSo2x5BnqMqsoHtzsmMstVUGiXMgwUCZov/wgAKCRCMstVUGiXM
g3olAQCFzp/BnopE7VgUSK5j0EOnMjSsvkQGkocqCVN1Km3y8AEAlV3EKb1rUN8s
SQ+QcEx7F4V38s+Aoo2SqU1yAwYsXAc=
=Ao/v
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v6.10-2024-07-08' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Namhyung Kim:
"Fix performance issue for v6.10
These address the performance issues reported by Matt, Namhyung and
Linus. Recently perf changed the processing of the comm string and DSO
using sorted arrays but this caused it to sort the array whenever
adding a new entry.
This caused a performance issue and the fix is to enhance the sorting
by finding the insertion point in the sorted array and to shift
righthand side using memmove()"
* tag 'perf-tools-fixes-for-v6.10-2024-07-08' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf dsos: When adding a dso into sorted dsos maintain the sort order
perf comm str: Avoid sort during insert
