The rt700 can only support single register read and write operations so
does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.
Tested-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-rt-sdw-maple-v1-1-85ee50c93905@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:
Currently, ASoC supports dailinks with the following mappings:
1 cpu DAI to N codec DAIs
N cpu DAIs to N codec DAIs
But the mapping between N cpu DAIs and M codec DAIs is not supported.
The reason is that we didn't have a mechanism to map cpu and codec DAIs
This series suggests a new snd_soc_dai_link_codec_ch_map struct in
struct snd_soc_dai_link{} which provides codec DAI to cpu DAI mapping
information used to implement N cpu DAIs to M codec DAIs support.
And add the codec_ch_maps to SOF SoundWire machine driver.
Merge series from Mark Brown <broonie@kernel.org>:
A lot of the Cirrus Logic devices only support single register
read/write operations so they get no benefit from using the rbtree cache
over the more modern maple tree cache, convert them to use maple tree.
ASoC is now supporting generic trigger ordering method.
This patch switch to use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/87o7lqfnzb.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current ASoC is assuming that trigger starting order is
Link -> Component -> DAI as default, and its reverse order for stopping.
But some Driver / Card want to reorder it for some reasons.
We have such flags, but is unbalance like below.
struct snd_soc_component_driver :: start_dma_last
struct snd_soc_dai_link :: stop_dma_first
We want to have more flexible, and more generic method.
This patch adds new snd_soc_trigger_order for start/stop at
component / DAI-link.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87r0qmfnzx.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The captured data will be combined from each cpu DAI if the dai link
has more than one cpu DAIs. We can set channel number indirectly by
adding sdw_codec_ch_maps.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230607031242.1032060-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, ASoC supports dailinks with the following mappings:
1 cpu DAI to N codec DAIs
N cpu DAIs to N codec DAIs
But the mapping between N cpu DAIs and M codec DAIs is not supported.
The reason is that we didn't have a mechanism to map cpu and codec DAIs
This patch suggests a new snd_soc_dai_link_codec_ch_map struct in
struct snd_soc_dai_link{} which provides codec DAI to cpu DAI mapping
information used to implement N cpu DAIs to M codec DAIs
support.
When a dailink contains two or more cpu DAIs, we should set channel
number of cpus based on its channel mask. The new struct also provides
channel mask information for each codec and we can construct the cpu
channel mask by combining all codec channel masks which map to the cpu.
The N:M mapping is however restricted to the N <= M case due to physical
restrictions on a time-multiplexed bus such as I2S/TDM, AC97, SoundWire
and HDaudio.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230607031242.1032060-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The cs35l30 can only support single register read and write operations
so does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.
Acked-by: David Rhodes <david.rhodes@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-cirrus-maple-v1-10-b806c4cbd1d4@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The cs43130 can only support single register read and write operations
so does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.
Acked-by: David Rhodes <david.rhodes@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-cirrus-maple-v1-9-b806c4cbd1d4@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The cs42l83 can only support single register read and write operations
so does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.
Acked-by: David Rhodes <david.rhodes@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-cirrus-maple-v1-8-b806c4cbd1d4@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The cs42l73 can only support single register read and write operations
so does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.
Acked-by: David Rhodes <david.rhodes@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-cirrus-maple-v1-7-b806c4cbd1d4@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The cs42l42 can only support single register read and write operations
so does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.
Acked-by: David Rhodes <david.rhodes@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-cirrus-maple-v1-6-b806c4cbd1d4@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The cs4234 can only support single register read and write operations
so does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.
Acked-by: David Rhodes <david.rhodes@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-cirrus-maple-v1-5-b806c4cbd1d4@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The cs35l35 can only support single register read and write operations
so does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.
Acked-by: David Rhodes <david.rhodes@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-cirrus-maple-v1-4-b806c4cbd1d4@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The cs35l34 can only support single register read and write operations
so does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.
Acked-by: David Rhodes <david.rhodes@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-cirrus-maple-v1-3-b806c4cbd1d4@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The cs35l33 can only support single register read and write operations
so does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.
Acked-by: David Rhodes <david.rhodes@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-cirrus-maple-v1-2-b806c4cbd1d4@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The cs35l32 can only support single register read and write operations
so does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.
Acked-by: David Rhodes <david.rhodes@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-cirrus-maple-v1-1-b806c4cbd1d4@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 3ed2b549b3 ("ALSA: pcm: fix wait_time calculations") corrected
the PCM wait_time calculations and in doing so reduced the calculated
wait_time. This exposed an issue with the Tegra Master Volume Control
(MVC) device where the reduced wait_time caused the MVC to fail. For now
fix this by setting the default wait_time for Tegra to be 500ms.
Fixes: 3ed2b549b3 ("ALSA: pcm: fix wait_time calculations")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20230613093453.13927-1-jonathanh@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The file is called spdif-in, but we abused it to show only sample rates
from various sources. Rectify it as far as possible (the FPGA doesn't
give us a lot of information).
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230612191325.1315854-10-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some info-querying code still used hw.resolution directly instead of
calling snd_timer_hw_resolution(), thus missing a possible
hw.c_resolution callback. This patch rectifies that.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230612191325.1315854-7-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is only a very partial fix - the frequency-dependent envelope & LFO
register values aren't adjusted.
But I'm not sure they were even correct at 48 kHz to start with, as most
of them are precalculated by common code which assumes an EMU8K-specific
44.1 kHz word clock, and it seems somewhat unlikely that the hardware's
register interpretation was adjusted to compensate for the different
word clock.
In any case I'm not going to spend time on fixing that, as this code is
unlikely to be actually used by anyone today.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230612191325.1315854-6-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now that we know the actual word clock, we can:
- Put the resulting rate into the hardware info
- At 44.1 kHz word clock shift the rate for the pitch calculations,
which presume a 48 kHz word clock
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230612191325.1315854-5-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The value isn't used yet; the subsequent commits will do that.
This ignores the existence of rates above 48 kHz, which is fine, as the
hardware will just switch to the fallback clock source when fed with a
rate which is incompatible with the base clock multiplier, which
currently is always x1.
The sample rate display in /proc spdif-in is adjusted to reflect our
understanding of the input rates.
This is tested only with an 0404b card without sync card, so there is a
lot of room for improvement.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230612191325.1315854-4-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The actually available clock sources depend on the available audio input
ports and dedicated clock input ports.
This includes refactoring the code to be data-driven to remain
manageable.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230612191325.1315854-3-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
So far, we set the fallback as a side effect of setting the source. But
the fallback makes no sense at all when an internal clock is selected.
Defaulting to 48k for S/PDIF & ADAT makes sense, but as that is the
global default and we're not changing it automatically any more, it's
just fine to leave it entirely to the explicit setting.
This changes the name of the pre-existing control to something more
appropriate (regardless of the split), so users will need to adjust
their mixer settings.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230612191325.1315854-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As the updated MIDI 2.0 spec has been published freshly, this is a
catch up to add the support for new specs, especially UMP v1.1
features, on Linux kernel.
The new UMP v1.1 introduced the concept of Function Blocks (FB), which
is a kind of superset of USB MIDI 2.0 Group Terminal Blocks (GTB).
The patch set adds the support for FB as the primary information
source while keeping the parse of GTB as fallback. Also UMP v1.1
supports the groupless messages, the protocol switch, static FBs, and
other new fundamental features, and those are supported as well.
Link: https://www.midi.org/midi-articles/details-about-midi-2-0-midi-ci-profiles-and-property-exchange
Link: https://lore.kernel.org/r/20230612081054.17200-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merge series from Brent Lu <brent.lu@intel.com>:
This patch series remove redundant dapm routes declared in multiple machine
drivers. These routes will be created by snd_soc_dapm_connect_dai_link_widgets()
during soundcard initialization. Following is the kernel log from a KBL
chromebook nocturne.
dmic:
[ 13.773455] avs_dmic avs_dmic: connected DAI link dmic-codec:Capture -> dmic-platform:DMIC Rx
[ 13.773460] avs_dmic avs_dmic: connected DAI link dmic-codec:Capture -> dmic-platform:DMIC WoV Rx
max98373:
[ 14.079536] avs_max98373 avs_max98373.1: connected DAI link avs_max98373.1-platform:ssp0 Tx -> i2c-MX98373:00:Right HiFi Playback
[ 14.079545] avs_max98373 avs_max98373.1: connected DAI link i2c-MX98373:00:Right HiFi Capture -> avs_max98373.1-platform:ssp0 Rx
[ 14.079550] avs_max98373 avs_max98373.1: connected DAI link avs_max98373.1-platform:ssp0 Tx -> i2c-MX98373:01:Left HiFi Playback
[ 14.079554] avs_max98373 avs_max98373.1: connected DAI link i2c-MX98373:01:Left HiFi Capture -> avs_max98373.1-platform:ssp0 Rx
hdaudio:
[ 14.094818] avs_hdaudio avs_hdaudio.2: connected DAI link hdaudioB0D2-platform:hdaudioB0D2-cpu0 Tx -> hdaudioB0D2:HDMI 0 Playback
[ 14.094824] avs_hdaudio avs_hdaudio.2: connected DAI link hdaudioB0D2-platform:hdaudioB0D2-cpu1 Tx -> hdaudioB0D2:HDMI 1 Playback
[ 14.094828] avs_hdaudio avs_hdaudio.2: connected DAI link hdaudioB0D2-platform:hdaudioB0D2-cpu2 Tx -> hdaudioB0D2:HDMI 2 Playback
UMP v1.1 spec allows to inform whether the function blocks are static
and not dynamically updated. Add a new flag bit to
snd_ump_endpoint_info to reflect that attribute, too.
The flag is set when a USB MIDI device is still in the old MIDI 2.0
without UMP 1.1 support. Then the driver falls back to GTBs, and they
are supposed to be static-only.
Link: https://lore.kernel.org/r/20230612081054.17200-10-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
UMP v1.1 supports the protocol switch via a UMP Stream message. When
it's received, we need to take care of the midi_version field in the
corresponding sequencer client, too.
This patch introduces a new ops to notify the protocol change to
snd_seq_ump_ops for handling it.
Link: https://lore.kernel.org/r/20230612081054.17200-9-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For allowing applications to track the FB active changes, this patch
adds the notification from the system port at each time a FB change is
handled and the active flag or re-grouping happens.
Link: https://lore.kernel.org/r/20230612081054.17200-8-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch implements the handling of the dynamic update of FB info.
When the FB info update is received after the initial parsing, it
means the dynamic FB info update. We compare the result, and if the
actual update is detected, it's notified via a new ops,
notify_fb_change, to the sequencer client, and the corresponding
sequencer ports are updated accordingly.
Link: https://lore.kernel.org/r/20230612081054.17200-7-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The UMP Utility and Stream messages are "groupless", i.e. an incoming
groupless packet should be sent only to the UMP EP port, and the event
with the groupless message is sent to UMP EP as is without the group
translation per port.
Also, the former reserved bit 0 for the client group filter is now
used for groupless events. When the bit 0 is set, the groupless
events are filtered out and skipped.
Link: https://lore.kernel.org/r/20230612081054.17200-6-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a new option to enable/disable the UMP Endpoint probing.
Some firmware seems screwed up when such a new command issued, and
this option allows user to suppress it.
Link: https://lore.kernel.org/r/20230612081054.17200-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Try to parse the UMP Endpoint and UMP Function Blocks for building the
topology at first. Only when those are missing (e.g. on an older USB
MIDI 2.0 spec or a unidirectional endpoint), the driver still creates
blocks based on USB group terminal block information as fallback.
Link: https://lore.kernel.org/r/20230612081054.17200-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds the basic support for UMP Endpoint and UMP Function
Block parsing, which are extended in the new UMP v1.1 spec.
The patch provides a new helper function to perform the query of the
UMP Endpoint information and builds up the UMP blocks based on UMP
Function Block information. For the communication over the UMP
Endpoint, it opens the rawmidi device once internally, inquiries the
UMP Endpoint and Function Block info by sending new UMP Stream
messages, and waits for the response for each query.
The new UMP spec allows to update the FB info and change its
associated groups or its activeness on the fly, too. For catching it,
the UMP core keeps watching the incoming UMP messages, and
snd_ump_receive() handles the incoming UMP Stream messages to refresh
the FB info.
Link: https://lore.kernel.org/r/20230612081054.17200-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a few more fields to snd_ump_endpoint_info and snd_ump_block_info
that are added in the new v1.1 spec. Those are filled by the UMP Stream
messages.
The rawmidi protocol version is bumped to 2.0.4 to indicate those
updates.
Also, update the proc outputs to show the newly introduced fields.
Link: https://lore.kernel.org/r/20230612081054.17200-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Current audio-graph-card2-custom-sample.dtsi is missing
address-cells / size-cells / reg. Thus it get too many DT warnings.
This patch solved it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87a5x5qw3d.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The previous conversion back to .probe() applied in commit 9abcd24002
("ASoC: Switch i2c drivers back to use .probe()") was created based on
v6.3. Since then two more drivers were added which need to be convert
back in the same way before eventually .probe_new() can be dropped from
struct i2c_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230612070608.836186-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
After reordering the irq probe, the error path was not properly done.
Lets fix it.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: stable@kernel.org
Fixes: 4cbb264d4e ("ASoC: mediatek: mt8173: Enable IRQ when pdata is ready")
Signed-off-by: Ricardo Ribalda Delgado <ribalda@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230612-mt8173-fixup-v2-2-432aa99ce24d@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
If the second component fails to initialize, cleanup the first on.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: stable@kernel.org
Fixes: f1b5bf0736 ("ASoC: mt2701/mt8173: replace platform to component")
Signed-off-by: Ricardo Ribalda Delgado <ribalda@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230612-mt8173-fixup-v2-1-432aa99ce24d@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Four routes "Left Playback<-sspX Tx", "Right Playback<-sspX Tx",
"sspX Rx<-Left Capture Sense", and "sspX Rx<-Right Capture Sense" are
created by snd_soc_dapm_connect_dai_link_widgets() automatically.
Remove the duplicate routes.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20230612110958.592674-13-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Two routes "AIF1 Playback<-sspX Tx" and "sspX Rx<-AIF1 Capture" are
created by snd_soc_dapm_connect_dai_link_widgets() automatically.
Remove the duplicate routes.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20230612110958.592674-12-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Two routes "AIF1 Playback<-sspX Tx" and "sspX Rx<-AIF1 Capture" are
created by snd_soc_dapm_connect_dai_link_widgets() automatically.
Remove the duplicate routes.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20230612110958.592674-11-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Two routes "AIF1 Playback<-sspX Tx" and "sspX Rx<-AIF1 Capture" are
created by snd_soc_dapm_connect_dai_link_widgets() automatically.
Remove the duplicate routes.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20230612110958.592674-10-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Two routes "AIF1 Playback<-sspX Tx" and "sspX Rx<-AIF1 Capture" are
created by snd_soc_dapm_connect_dai_link_widgets() automatically.
Remove the duplicate routes.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20230612110958.592674-9-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Two routes "Playback<-sspX Tx" and "sspX Rx<-Capture" are created by
snd_soc_dapm_connect_dai_link_widgets() automatically. Remove the
duplicate routes.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20230612110958.592674-8-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Two routes "Left HiFi Playback<-sspX Tx" and
"Right HiFi Playback<-sspX Tx" are created by
snd_soc_dapm_connect_dai_link_widgets() automatically. Remove the
duplicate routes.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20230612110958.592674-7-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Two routes "Left HiFi Playback<-sspX Tx" and
"Right HiFi Playback<-sspX Tx" are created by
snd_soc_dapm_connect_dai_link_widgets() automatically. Remove the
duplicate routes.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20230612110958.592674-6-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The route "HiFi Playback<-sspX Tx" is created by
snd_soc_dapm_connect_dai_link_widgets() automatically. Remove the
duplicate routes.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20230612110958.592674-5-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Three routes "HDMI 0 Playback<-hdaudioB0D2-cpu0 Tx",
"HDMI 1 Playback<-hdaudioB0D2-cpu1 Tx" and
"HDMI 2 Playback<-hdaudioB0D2-cpu2 Tx" are created by
snd_soc_dapm_connect_dai_link_widgets() automatically. Remove the
duplicate routes.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20230612110958.592674-4-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Two routes "DMIC Rx<-Capture" and "DMIC WoV Rx<-Capture" are created
by snd_soc_dapm_connect_dai_link_widgets() automatically. Remove the
duplicate routes.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20230612110958.592674-3-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Two routes "Playback<-sspX Tx" and "sspX Rx<-Capture" are created by
snd_soc_dapm_connect_dai_link_widgets() automatically. Remove the
duplicate routes.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20230612110958.592674-2-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
HDA can only support single register read and write operations so does not
benefit from block writes. This means it gets no benefit from using the
rbtree register cache over the maple tree register cache so convert it to
use maple trees instead, it is more modern.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-alsa-hda-maple-v1-1-a2b725c8b8f5@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merge series from Walker Chen <walker.chen@starfivetech.com>:
Some minor issues were found during addtional testing and static
analysis. The first patch fix the error check for the return value of
devm_reset_control_array_get_exclusive(). The second patch drop some
unused macros.
It has CPU:Codec = 1:1 and N:N samples, but missing 1:N settings.
This patch adds it.
One note here is that because of registering timing, probing and
CPU/Codec numbering are mismatching.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87ilbx1kh3.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Refactor the function so reading the data is done outside the work
function so fuzzing can pass data directly into the work callbacks.
Also expose the inner function outside the module so we can call it from
the injector.
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230608221822.2825786-1-cujomalainey@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This reverts commit cbbc0ec6de ("ASoC: mediatek: mt8192-mt6359:
Remove " Jack" from Headphone pin name"). That commit removed the "
Jack" suffix with the reasoning that it is automatically added to the
name of the kcontrol created, which is true, but this name is also used
to look for the DAPM widget that will be toggled when the jack status is
updated. Since the widget is still called "Headphone Jack" the jack
can't link to the widget and the following error is shown:
mt8192_mt6359 sound: ASoC: DAPM unknown pin Headphone
It is not possible to also rename the headphone DAPM widget because its
name is used by a switch kcontrol, "Headphone Jack Switch", both to link
to the headphone widget and to assemble its name. This switch's name is
referenced in the upstream UCM file, so renaming it would break
userspace. Since the original commit didn't bring any benefit, besides
sparing a few CPU cycles, simply revert it.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20230608221050.217968-1-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the check for devm_reset_control_array_get_exclusive() return value.
The devm_reset_control_array_get_exclusive() function may return NULL if
it's an optional request. If optional is intended then NULL should not
be treated as an error case, but as a special kind of success case. So
here the IS_ERR() is used to check better.
Signed-off-by: Walker Chen <walker.chen@starfivetech.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230608135750.11041-2-walker.chen@starfivetech.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>:
This series performs some cleanups to the mt8188-mt6359 driver,
including usage of bitfield macros, adding definitions of register
fields and some others for readability and consistency.
clk_get_rate() returns an unsigned long, so there is no point in storing it
in a long, and test for negative values.
So, turn 'parent_rate' into an unsigned long, simplify the sanity check,
the error message and the return value, in case of error (i.e. 0).
Doing so also turns 'i' and 'valid_rates' into unsigned long, but it is
fine and harmless.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/53f928290f08f50ff43031e17fe1d88443c2c441.1686202022.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace open coded instances of FIELD_GET() with it, move register
definitions at the top of the file and also replace magic numbers
with register definitions.
While at it, also change a regmap_update_bits() call to regmap_write()
because the top 29 bits of AUD_TOP_CFG (31:3) are reserved (unused).
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20230608084727.74403-6-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change some dev_info prints to dev_err() and some to dev_dbg(),
depending on the actual severity of them.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20230608084727.74403-5-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change all instances of `return ret` to `return 0` at the end of
functions where ret is always zero and also change functions
mt8188_{hdmi,dptx}_codec_init to be consistent with how other
functions are returning errors
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20230608084727.74403-4-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This code triggers a Smatch static checker warning and does sort of
look like an error path.
sound/soc/mediatek/mt8188/mt8188-mt6359.c:597 mt8188_max98390_codec_init() warn: missing error code? 'ret'
However, returning 0 is intentional. Make that explicit.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20230608084727.74403-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Those entries fit in one line: compress them to reduce line count.
While at it, also add the sentinel comment to the last entry.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20230608084727.74403-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use existing define for WSA883X_GLOBAL_PA_ENABLE instead of hard-coded
value, just like in other places in this driver.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230607171326.179527-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
One removal of a non-existent Kconfig initialization and one
correction to enable SoundWire link when no HDaudio external codec is
detected. This will generate more information and help resolve cases
where the ACPI information is incorrect.
The 'hda_disable_rewinds' kernel parameter is initialized with a
non-existent CONFIG_SND_SOC_SOF_HDA_DISABLE_REWINDS.
We probably forgot to clean this up when this Kconfig option was
removed when upstreaming in 2021.
Reported-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230606222529.57156-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The functionality described in Commit 61bef9e68d ("ASoC: SOF: Intel: hda: enforce exclusion between HDaudio and SoundWire")
does not seem to be properly implemented with two issues that need to
be corrected.
a) The test used is incorrect when DisplayAudio codecs are not supported.
b) Conversely when only Display Audio codecs can be found, we do want
to start the SoundWire links, if any. That will help add the relevant
topologies and machine descriptors, and identify cases where the
SoundWire information in ACPI needs to be modified with a quirk.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230606222529.57156-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have a lot of different virtual media drivers, which can be used for
testing of the userspace applications and media subsystem middle layer.
However, all of them are aimed at testing the video functionality and
simulating the video devices. For audio devices we have only snd-dummy
module, which is good in simulating the correct behavior of an ALSA device.
I decided to write a tool, which would help to test the userspace ALSA
programs (and the PCM middle layer as well) under unusual circumstances
to figure out how they would behave. So I came up with this Virtual PCM
Test Driver.
This new Virtual PCM Test Driver has several features which can be useful
during the userspace ALSA applications testing/fuzzing, or testing/fuzzing
of the PCM middle layer. Not all of them can be implemented using the
existing virtual drivers (like dummy or loopback). Here is what can this
driver do:
- Simulate both capture and playback processes
- Generate random or pattern-based capture data
- Inject delays into the playback and capturing processes
- Inject errors during the PCM callbacks
Also, this driver can check the playback stream for containing the
predefined pattern, which is used in the corresponding selftest to check
the PCM middle layer data transferring functionality. Additionally, this
driver redefines the default RESET ioctl, and the selftest covers this PCM
API functionality as well.
The driver supports both interleaved and non-interleaved access modes, and
have separate pattern buffers for each channel. The driver supports up to
4 channels and up to 8 substreams.
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230606193254.20791-2-ivan.orlov0322@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On loongson controller, the value of WALLCLK register
is always 0, which is meaningless, so we return directly.
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Yingkun Meng <mengyingkun@loongson.cn>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://lore.kernel.org/r/185df71ef413ab190460eb377703214ee7288aeb.1686128807.git.siyanteng@loongson.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On loongson controller, after calling snd_hdac_stream_updateb()
to enable DMA engine, the SDnCTL.STRM will become to zero. We
need to access SDnCTL in dword to keep SDnCTL.STRM is not changed.
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Yingkun Meng <mengyingkun@loongson.cn>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://lore.kernel.org/r/27aeddf5ebbe7c69631cec0e489c1b264be94990.1686128807.git.siyanteng@loongson.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On loongson controller, RIRBSTS.RINTFL cannot be cleared,
azx_interrupt() is called all the time. We disable RIRB
interrupt, and use polling mode by default.
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Yingkun Meng <mengyingkun@loongson.cn>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://lore.kernel.org/r/d309a75424d438b958d90d797b4f1ba45468e090.1686128807.git.siyanteng@loongson.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We are using get_stream_cpu() to get CPU stream which cares
Codec2Codec. But it is static function for now, and we want to use it
from other files. This patch makes it global function.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87fs7cj9mf.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the commit 7bb6234095 ("ALSA: hda/realtek: fix speaker, mute/micmute
LEDs not work on a HP platform"), speakers and LEDs are fixed but only 2
CS35L41 amplifiers on SPI bus connected to Realtek codec are enabled. Need
the ALC245_FIXUP_CS35L41_SPI_4_HP_GPIO_LED to get all amplifiers working.
Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Fixes: 7bb6234095 ("ALSA: hda/realtek: fix speaker, mute/micmute LEDs not work on a HP platform")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230606145747.135966-1-chris.chiu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
An unusually large set of patches to deal with new SoundWire-based
platforms.
The bulk of the patches addresses support for MTL using RT712, RT713,
MAX98363, CS42L42 jack codec and amplifiers. The sof_sdw machine
driver had to be updated to remove limitations on number of codecs per
links, dai types, dai naming, etc. We also moved parts of the Realtek
and Maxim support in common code to avoid duplication.
Community users also reported two Dell SKUs which were not supported
in the mainline due to hardware permutations.
A lot of routine driver specific fixes here, nothing in the core though
there are a couple of fixes for the generic cards. There's also a few
new quirks for x86 platforms.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmR/LuwACgkQJNaLcl1U
h9DUZgf/a6hZMe3KVyW86Migg2Gwo4rpuG5KyFHXsOQnOwJCom+UdzGP8C+Hwugt
lLXB9WqQ6rJPpnGFRfbVx7GXHhbxwWrQYUnkoZVXFDAB9xe5IYil7xnQxVl/R7Nr
2SIS0y8X8ckbqy4oGoAUUco4y2jRNF8RBXw4ksZzdALGcZ6/zwayDxC0aPMxtPco
hVJarYa5bRZR3lcxrr9jf5DQP6OFX8gYu3C5e11q6m2OC5B8f22i62vpQ1h44eS2
amHoamFNvVN3sso+ZCE1wWgZa5rYCuNB1Q7q9ZoZFiW/VEeDK2SVsmUso2xDnD3a
8amA62PV2zokmxquyDIn5lwrXuJmMA==
=iAoe
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.4-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.4
A lot of routine driver specific fixes here, nothing in the core though
there are a couple of fixes for the generic cards. There's also a few
new quirks for x86 platforms.
We don't need to change the numid at each time snd_ctl_rename_id() is
called, as the control element size itself doesn't change. Let's keep
the previous numid value.
Along with it, add a note about calling this function only in the
card init phase.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230606094035.14808-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Ensure Firmware Load control and Firmware Type control
returns 1 when the value changes.
Remove fw_mutex from firmware load control put, since it is
unnecessary, and prevents any possibility of mutex inversion.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230606103436.455348-2-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
HD-audio core code replaces the kctl->id.index of SPDIF-related
controls after assigning via snd_ctl_add(). This doesn't work any
longer with the new Xarray lookup change. The change of the kctl->id
content has to be done via snd_ctl_rename_id() helper, instead.
Fixes: c27e1efb61 ("ALSA: control: Use xarray for faster lookups")
Cc: <stable@vger.kernel.org>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230606093855.14685-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
GUS driver replaces the kctl->id.index after assigning the kctl via
snd_ctl_add(). This doesn't work any longer with the new Xarray
lookup change. It has to be set before snd_ctl_add() call instead.
Fixes: c27e1efb61 ("ALSA: control: Use xarray for faster lookups")
Cc: <stable@vger.kernel.org>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230606093855.14685-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
cmipci driver replaces the kctl->id.device after assigning the kctl
via snd_ctl_add(). This doesn't work any longer with the new Xarray
lookup change. It has to be set before snd_ctl_add() call instead.
Fixes: c27e1efb61 ("ALSA: control: Use xarray for faster lookups")
Cc: <stable@vger.kernel.org>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230606093855.14685-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ymfpci driver replaces the kctl->id.device after assigning the kctl
via snd_ctl_add(). This doesn't work any longer with the new Xarray
lookup change. It has to be set before snd_ctl_add() call instead.
Fixes: c27e1efb61 ("ALSA: control: Use xarray for faster lookups")
Cc: <stable@vger.kernel.org>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230606093855.14685-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The new xarray lookup code requires to know complete kcontrol->id before
snd_ctl_add() call. Reorder the code to make the initialization properly.
Cc: stable@kernel.org # v5.19+
Reported-by: Martin Zidek <zidek@master.cz>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230606073122.597491-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merge series from Trevor Wu <trevor.wu@mediatek.com>:
In the series, we extend the capability of mt8188-mt6359 driver.
The following changes are included.
1. Divide ADDA BE dai into two dais for SOF.
2. Register hdmi/dp jack pins.
3. dai_fmt can be configured from device tree.
4. Add some I2S codecs support.
In addition, new compatible string "mediatek,mt8188-nau8825" is
included for a new board support.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
This patchset adds the changes required for the hda-dai extension to
deal with SSSP/DMIC/SoundWire starting with LunarLake, as well as the
new TLV IPC to provide the DMA stream_tag to the DSP firmware.
LunarLake support for SSP/DMIC is ready but is gated by the patch
"ASoC: SOF: Intel: shim: add enum for ACE 2.0 IP used in LunarLake"
currently only present in the SoundWire tree.
Currently the read event packet size in snd_seq_read() is defined by
client->midi_version value that is guaranteed to be zero if UMP isn't
enabled. But the static analyzer doesn't know of the fact, and it
still suspects as if it were leading to a potential overflow.
Add the more explicit check of CONFIG_SND_SEQ_UMP to determine the
aligned_size value for avoiding the confusion.
Fixes: 46397622a3 ("ALSA: seq: Add UMP support")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202305261415.NY0vapZK-lkp@intel.com/
Link: https://lore.kernel.org/r/20230605144758.6677-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The register changed with the HDaudio integration, the information is
present in the extended link descriptor and not in the SHIM.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230602205620.310879-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some functions can be used for newer LNL hardware.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230602205620.310879-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds a DMA config TLV structure and the relevant code to
copy this TLV after the gateway configuration. For now this is an
iso-functionality change, the TLVs are not configured just
yet. Additional patches will be needed for DMIC/SSP/ALH (aka
SoundWire).
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230602205620.310879-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Starting with LunarLake, the DMIC/SSP/SoundWire audio interfaces will
use the HDaudio DMA. This patch adds the DMA configuration structure
to be passed as a TLV appended at the end of each gateway
configuration.
This patch only provides the definitions for now, the TLV will be
added in the actual blobs separately for each interface.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230602205620.310879-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
LunarLake introduces a new TLV blob passed to the firmware for DMA
configuration. This TLV structure is directly inspired by the ALH
multi-gateway structure used so far. This patch suggest a transition
to the more abstract structure with no references to ALH.
This is an iso-functionality redefinition of structure, the TLV will
be added in a follow-up patch.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230602205620.310879-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The existing code for HDAudio DAIs cannot be extended to other types
of DAIs, specific programming sequences need to be abstracted
away.
This patch hides the mechanism to determine the multi-link structure
related to the DAI and program the LOSIDV register. An added benefit
is that we can remove all references to the codec DAI from what should
be a CPU dai configuration only.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230602205620.310879-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The existing code for HDAudio DAIs cannot be extended to other types
of DAIs, specific programming sequences need to be abstracted away.
This patch hides the stream format setup which is currently completely
related to the HDaudio codec setup - not something that will work for
other types of DAIs.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230602205620.310879-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The existing code for HDAudio DAIs cannot be extended to other types
of DAIs, specific programming sequences need to be abstracted
away. Start here with hiding the stream_tag needed by the HDAudio
codec_dai.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230602205620.310879-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
make KCFLAGS='-fanalyzer' sound/soc/sof/intel/ reports several NULL
pointer dereference paths.
Example log:
ops = hda_dai_get_ops(substream, cpu_dai);
| | ^~~~~
| | |
| | (14) return of NULL to ‘non_hda_dai_hw_params’ from ‘hda_dai_get_ops’
| 353 | sdev = widget_to_sdev(w);
| 354 | hext_stream = ops->get_hext_stream(sdev, cpu_dai, substream);
| | ~~~~~~~~~~~~~~~~~~~~
| | |
| | (15) dereference of NULL ‘ops’
The function hda_dai_get_ops() can return NULL, but the return value
is not checked across the board. It's not a problem today, since we do
check in the first use of the function, but static analysis tools are
not aware of the different ALSA stages. Rather than argue forever,
let's just add the error checks consistently and make sure this tool
can be added to the CI checks.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230602205620.310879-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for MAX98363 soundwire codec. Update build
configuration to include this codec.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Signed-off-by: Uday M Bhat <uday.m.bhat@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230602202225.249209-27-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Init function and structure names are modified to use maxim
instead of max98373. Card components and speaker names are
updated based on part id.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Signed-off-by: Uday M Bhat <uday.m.bhat@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230602202225.249209-26-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This is needed to use the common implementation for other maxim
soundwire codecs
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Signed-off-by: Uday M Bhat <uday.m.bhat@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230602202225.249209-25-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Helper functions added to support CS42l42 soundwire codec.
Build configuration is updated to include this codec.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Signed-off-by: Uday M Bhat <uday.m.bhat@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230602202225.249209-24-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Boards were using this in older kernels before adl and rpl ids were
split. Add this back to maintain support.
Reviewed-by: Curtis Malainey <cujomalainey@chromium.org>
Signed-off-by: Terry Cheong <htcheong@chromium.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230602202225.249209-23-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Corrected the author name camel case and initial.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Balamurugan C <balamurugan.c@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230602202225.249209-22-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Moving amp only boards into end of the match table to have
better order and maintenance.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Balamurugan C <balamurugan.c@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230602202225.249209-21-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adding HDMI-In capture support for the products doesn't have onboard
I2S codec.but need to support HDMI-In capture via I2S and audio playback
through HDMI/DP monitor.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Balamurugan C <balamurugan.c@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230602202225.249209-20-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To support multiple codecs per SoundWire link, we have to assign multiple
CPU DAIs to different DAI links sharing the same physical link. This is
not possible with the existing code since we assume that only 'Pin2' is
used for playback and 'Pin3' used for capture - additional DAIs cannot
be handled.
This patch enables more CPU DAIs to be used, e.g. "SDW0 Pin2",
"SDW0 Pin3", and "SDW0 Pin4" for SDW0-Playback-SimpleJack,
SDW0-Capture-SimpleJack, and SDW0-Playback-SmartAmp DAI links on physical
link #0.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230602202225.249209-15-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
rt713 is rt712 but without amp.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230602202225.249209-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rt712 is a multi function codec which shpports headset, amp, and dmic
functions. Rt712 has two sdw interfaces and codec drivers, one for jack
and amp, the other for dmic. part id 0x712 is for jack and amp, and 0x1712
is for dmic.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230602202225.249209-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Let rename rt711_sdca to rt_sdca_jack and let it be used for all
Realtek sdca jacks.
The commit uses component->name_prefix to construct card->components,
and determine which codec it is. So, we have to set name_prefix
properly.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230602202225.249209-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Jack Detection source can be applied to all jacks, not only rt711.
No function changes.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230602202225.249209-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
if (!SOF_RT711_JDSRC(sof_sdw_quirk)) is tested in rt711_sdca_add_codec_
device_props(), and we don't add software node to the device if jack
source is not set. We need to do the same test in
sof_sdw_rt711_sdca_exit(), and avoid removing software node if jack
source is not set.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230602202225.249209-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A codec may support multiple dais for different purpose. For example,
the rt712 codec supports jack and amp on different dais and machine
driver needs to create different dailink for those dais.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230602202225.249209-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We append codec type to dailink name to distinguish different dailink
on the same sdw link and direction. But we could create multi dailinks
for a codec and the dailink name will be duplicated if we append codec
type to the dailink name.
Appending dai type instead of codec type can solve the issue.
For example, if a codec supports JACK on dai 0 and AMP on dai 1, the
existing code will create dailinks
SDW0-Playback-SimpleJack or SDW0-Playback-SmartAmp for both dailinks,
and it will be SDW0-Playback-SimpleJack for dailink 0 and
SDW0-Playback-SmartAmp for dailink 1 after this change.
Then codec type is not used any more and can be removed.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230602202225.249209-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
codec_info_list[codec_index] is used multiple times in the
create_sdw_dailink() function. Adding a codec_info pointer to shorten
the code. This is a preparation for the following up patches.
No function changed.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230602202225.249209-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, we assign dailink ids in order, and shift with codec type.
The purpose is to have consistent dailink ids for topologies.
This can be simplified if we have a predefined dailink id in
sof_sdw_dai_info.
We reuse the existing ids as the predefine ids. So the dailink ids will
not be changed by this commit.
With this change, we no longer need to check the adr order described in a
snd_soc_acpi_link_adr array.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230602202225.249209-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The existing code create a dailink for a codec. However, we may need
multi dailinks for a codec. This commit adds a new struct in
sof_sdw_codec_info{} to store the dai info of a codec.
The initial assumption if that we will create at most 3 dailink types
for a codec, since this is the max known with upcoming SDCA devices. We
may need to increase this number as new SDCA 'functions' become available.
One strong assumption is that all dailinks exposed are independent, as per
SDCA directions.
This commit just moves some items into the new sof_sdw_dai_info struct.
There is no function changed. Multi dais supported will be added in the
follow up commits.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230602202225.249209-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The vangogh driver just gained a link time dependency that now causes
randconfig builds to fail:
x86_64-linux-ld: sound/soc/amd/vangogh/pci-acp5x.o: in function `snd_acp5x_probe':
pci-acp5x.c:(.text+0xbb): undefined reference to `snd_amd_acp_find_config'
Fixes: e89f45edb7 ("ASoC: amd: vangogh: Add check for acp config flags in vangogh platform")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230605085839.2157268-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Headset microphone on this platform does not work without
ALC897_FIXUP_HEADSET_MIC_PIN fixup.
Signed-off-by: RenHai <kean0048@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230602003604.975892-1-kean0048@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
- Include the FX bus map, without which the already present send routing
info would require looking up the documentation.
- Include the physical I/O channels as known to the driver
- Make the multi-channel capture map actually name the mapped input
channels rather than "FXBUS" (Audigy) or even "???" (SbLive)
- The latter two are omitted for E-MU cards, as their physical I/O is
routed through the FPGA
- While at it, make the "Card" field somewhat more useful
This includes de-duplicating the label tables between emuproc and emufx,
updating/improving the FX bus label table, and making the SB Live! 5.1
multi-track capture channel mapping hack data-driven.
Tested-by: Jonathan Dowland <jon@dow.land>
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230526101659.437969-7-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Include the routing information, which can be actually read back.
Somewhat as a drive-by, make the register dump format less obscure - the
previous one made no sense at all.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230526101659.437969-6-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It seems to make little sense to include the FX send routing, but not
the amounts.
This also simplifies the code somewhat, and lines up the output.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230526101659.437969-5-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The limits were appropriate only for the 2nd set.
FWIW, the channel count 4 for the 2nd set is suspicious as well - at
least P17V_PLAYBACK_FIFO_PTR actually has 8 channels, and comments on
HCFG2 hint at that as well. But all bitmasks are documented only for 4
channels. Anyway, rectifying that is out of scope for this patch.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230526101659.437969-3-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The 2nd register set belongs to the P16V chip (or embedded P17V module),
so there is nothing to show when no such part is present. Gen2 E-MU
cards have a P17V, but it's entirely unused, so we hide it there as
well.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230526101659.437969-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
After commit b8a1a4cd5a ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f498 ("i2c: Switch .probe() to not take an id parameter") convert
back to (the new) .probe() to be able to eventually drop .probe_new() from
struct i2c_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/r/20230525203640.677826-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The vangogh driver just gained a link time dependency that now causes
randconfig builds to fail:
x86_64-linux-ld: sound/soc/amd/vangogh/pci-acp5x.o: in function `snd_acp5x_probe':
pci-acp5x.c:(.text+0xbb): undefined reference to `snd_amd_acp_find_config'
Fixes: e89f45edb7 ("ASoC: amd: vangogh: Add check for acp config flags in vangogh platform")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230602124447.863476-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds multiple i2s codecs support including NAU88L25,
MAX98390, and the dumb amp like NAU8318 usage. In addition, dmic-codec
is also added to skip the beginning pop noise.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://lore.kernel.org/r/20230526093150.22923-7-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When a widget is added to dapm via snd_soc_dapm_new_widgets,
dapm_debugfs_add_widget is also called to create a corresponding debugfs
file. However, when a widget is freed by snd_soc_dapm_free_widget, the
corresponding debugfs is not cleared. As a result, the freed widget is
still seen in the dapm directory.
This patch adds dapm_debugfs_free_widget to free the debugfs of a
specified widget, and it's called at snd_soc_dapm_free_widget to clean
up the debugfs for freed widget.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20230526093150.22923-6-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There are two changes included in the patch.
First, add set_dailink_daifmt() function, so dai_fmt can be updated by
the configuration in dai-link sub node.
Second, remove codec phandle from required property in dai-link sub node.
For example, user possibly needs to update dai-format for all etdm
co-clock dai-links, but codec doesn't need to be specified in capture
dai-link for a speaker amp.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20230526093150.22923-5-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some userspace applications need jack control events, so register hdmi
and dp jack pins to activate jack control events.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20230526093150.22923-4-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
MT8188 will support SOF. In SOF, be_hw_params_fixup callback are used to
configure BE hardware parameters. However, playback and capture stream
share the same callback function in which it can't know the stream type.
It's possible to require different parameters for playback and capture
stream, so separate them into two dais for SOF usage.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20230526093150.22923-2-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There's an issue on SAI synchronous mode that TX/RX side can't get BCLK
from RX/TX it sync with if BYP bit is asserted. It's a workaround to
fix it that enable SION of IOMUX pad control and assert BCI.
For example if TX sync with RX which means both TX and RX are using clk
form RX and BYP=1. TX can get BCLK only if the following two conditions
are valid:
1. SION of RX BCLK IOMUX pad is set to 1
2. BCI of TX is set to 1
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20230530103012.3448838-1-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The code in asoc_simple_startup was treating any non-zero return from
snd_pcm_hw_constraint_minmax as an error, when this can return 1 in some
normal cases and only negative values indicate an error.
When this happened, it caused asoc_simple_startup to disable the clocks
it just enabled and return 1, which was not treated as an error by the
calling code which only checks for negative return values. Then when the
PCM is eventually shut down, it causes the clock framework to complain
about disabling clocks that were not enabled.
Fix the check for snd_pcm_hw_constraint_minmax return value to only
treat negative values as an error.
Fixes: 5ca2ab4598 ("ASoC: simple-card-utils: Add new system-clock-fixed flag")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20230602011936.231931-1-robert.hancock@calian.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Walker Chen <walker.chen@starfivetech.com>:
This patchset adds TDM audio driver for the StarFive JH7110 SoC. The
first patch adds device tree binding for TDM module. The second patch
adds tdm driver support for JH7110 SoC. The last patch adds device tree
node and pins configuration of tdm to JH7110 dts.
The series has been tested on the VisionFive 2 board by plugging an
audio expansion board.
For more information of audio expansion board, you can take a look
at the following webpage:
https://wiki.seeedstudio.com/ReSpeaker_2_Mics_Pi_HAT/
Merge series from Trevor Wu <trevor.wu@mediatek.com>:
These patches concern modifications made in mt8186[1]. The clock
unregistration mechanism used in mt8188 and mt8195 is similar with
mt8186, resulting in the same problem existing within the driver.
Therefore, the solution has also been applied to these two platforms.
[1] https://lore.kernel.org/all/20230511092437.1.I31cceffc8c45bb1af16eb613e197b3df92cdc19e@changeid/
The dma pointer must be set to the passed stream pointer, even
if that pointer is NULL.
Fixes: e496112529 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230601124907.3128170-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
MAX98363 does not support 32bit depth audio.
Removed 32bit from the supported format list.
Instead, added 16bit and 24bit to the list.
Signed-off-by: Ryan Lee <ryans.lee@analog.com>
Link: https://lore.kernel.org/r/20230601130600.25344-1-ryan.lee.analog@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add mt8188 and mt8186 .dbg_dump callback to print some information when
DSP panic occurs.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Yaochun Hung <yc.hung@mediatek.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230601034939.15802-2-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
During mt8195_afe_init_clock(), mt8195_audsys_clk_register() was called
followed by several other devm functions. At mt8195_afe_deinit_clock()
located at mt8195_afe_pcm_dev_remove(), mt8195_audsys_clk_unregister()
was called.
However, there was an issue with the order in which these functions were
called. Specifically, the remove callback of platform_driver was called
before devres released the resource, resulting in a use-after-free issue
during remove time.
At probe time, the order of calls was:
1. mt8195_audsys_clk_register
2. afe_priv->clk = devm_kcalloc
3. afe_priv->clk[i] = devm_clk_get
At remove time, the order of calls was:
1. mt8195_audsys_clk_unregister
3. free afe_priv->clk[i]
2. free afe_priv->clk
To resolve the problem, we can utilize devm_add_action_or_reset() in
mt8195_audsys_clk_register() so that the remove order can be changed to
3->2->1.
Fixes: 6746cc8582 ("ASoC: mediatek: mt8195: add platform driver")
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230601033318.10408-3-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
During mt8188_afe_init_clock(), mt8188_audsys_clk_register() was called
followed by several other devm functions. The caller of
mt8188_afe_init_clock() utilized devm_add_action_or_reset() to call
mt8188_afe_deinit_clock(). However, the order was incorrect, causing a
use-after-free issue during remove time.
At probe time, the order of calls was:
1. mt8188_audsys_clk_register
2. afe_priv->clk = devm_kcalloc
3. afe_priv->clk[i] = devm_clk_get
At remove time, the order of calls was:
1. mt8188_audsys_clk_unregister
3. free afe_priv->clk[i]
2. free afe_priv->clk
To resolve the problem, it's necessary to move devm_add_action_or_reset()
to the appropriate position so that the remove order can be 3->2->1.
Fixes: f6b026479b ("ASoC: mediatek: mt8188: support audio clock control")
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230601033318.10408-2-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The patch is to manage HSD feature for power saving. The detail is to
disable HSD feature after the headset detection is done. When the jack
is inserted, the HSD feature will be enabled again.
Signed-off-by: David Lin <CTLIN0@nuvoton.com>
Link: https://lore.kernel.org/r/20230531075334.168637-1-CTLIN0@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_get_playback_capture() (A) returns number of substreams for
playback/capture, and then, we can use playback/capture_only flag (X)(Y).
(A) static int soc_get_playback_capture(...)
{
...
(X) if (dai_link->playback_only) {
(*) *playback = 1;
*capture = 0;
}
(Y) if (dai_link->capture_only) {
*playback = 0;
(*) *capture = 1;
}
...
}
But this flag should not have effect to opposite side stream (*).
This patch tidyup it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87sfbezlq8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_get_playback_capture() (A) returns number of substreams for
playback/capture (B).
(A) static int soc_get_playback_capture(...,
(B) int *playback, int *capture)
{
...
for_each_xxx(...) {
if (xxx)
return -EINVAL;
=> *playback = 1;
...
=> *capture = 1;
...
}
...
}
But, it is directly updating playback/capture which is the result of this
function even though it might be error. It should be updated in case of
succeed only. This patch updates it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87ttvuzlqe.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_get_playback_capture() (A) checks dai_link status, and indicate error
if it was not matching (B).
(A) static int soc_get_playback_capture(...)
{
...
^ if (dai_link->dynamic && dai_link->num_cpus > 1) {
| dev_err(rtd->dev,
(B) "DPCM doesn't support Multi CPU for Front-Ends yet\n");
| return -EINVAL;
v }
...
}
We can use 100 char for 1 line today. This patch cleanup error code line.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87v8gazlqk.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_get_playback_capture() (A) is using rtd->dai_link->xxx everywhere.
Because of that, 1 line is unnecessarily long and not readable.
(A) static int soc_get_playback_capture(...)
{
if (rtd->dai_link->dynamic ...) {
^^^^^^^^^^^^^
...
} else {
int cpu_capture = rtd->dai_link->c2c_params ?
^^^^^^^^^^^^^
...
}
if (rtd->dai_link->playback_only) {
^^^^^^^^^^^^^
...
}
...
}
This patch uses variable "dai_link" to be clear code.
Nothing changes the meanings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87wn0qzlqp.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_get_playback_capture() (A) returns number of substreams for
playback/capture (B).
ASoC will probe the Sound Card and mapps CPU<->Codec pair.
(A) static int soc_get_playback_capture(...,
(B) int *playback, int *capture)
{
...
if (rtd->dai_link->playback_only) {
*playback = 1;
*capture = 0;
}
if (rtd->dai_link->capture_only) {
*playback = 0;
*capture = 1;
}
(C)
return 0;
}
But it might be no playback no capture if it returns playback=0, capture=0.
It is very difficult to notice about it. This patch indicates error at (C)
then.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87y1l6zlqx.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Thinkpad Neo14 Ryzen Edition uses Ryzen 6800H processor, and adding to
quirks list for acp6x will enable internal mic.
Signed-off-by: Sicong Jiang <kevin.jiangsc@gmail.com>
Link: https://lore.kernel.org/r/20230531090635.89565-1-kevin.jiangsc@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Cristian Ciocaltea <cristian.ciocaltea@collabora.com>:
This patch series handles a few issues related to the ES8316 audio
codec, discovered while doing some testing on the Rock 5B board.
When using the codec through the generic audio graph card, there are at
least two calls of es8316_set_dai_sysclk(), with the effect of limiting
the allowed sample rates according to the MCLK/LRCK ratios supported by
the codec:
1. During audio card setup, to set the initial MCLK - see
asoc_simple_init_dai().
2. Before opening a stream, to update MCLK, according to the stream
sample rate and the multiplication factor - see
asoc_simple_hw_params().
In some cases the initial MCLK might be set to a frequency that doesn't
match any of the supported ratios, e.g. 12287999 instead of 12288000,
which is only 1 Hz below the supported clock, as that is what the
hardware reports. This creates an empty list of rate constraints, which
is further passed to snd_pcm_hw_constraint_list() via
es8316_pcm_startup(), and causes the following error on the very first
access of the sound card:
$ speaker-test -D hw:Analog,0 -F S16_LE -c 2 -t wav
Broken configuration for playback: no configurations available: Invalid argument
Setting of hwparams failed: Invalid argument
Note that all subsequent retries succeed thanks to the updated MCLK set
at point 2 above, which uses a computed frequency value instead of a
reading from the hardware registers. Normally this would have mitigated
the issue, but es8316_pcm_startup() executes before the 2nd call to
es8316_set_dai_sysclk(), hence it cannot make use of the updated
constraints.
Since es8316_pcm_hw_params() performs anyway a final validation of MCLK
against the stream sample rate and the supported MCLK/LRCK ratios, fix
the issue by ensuring that sysclk_constraints list is only set when at
least one supported sample rate is autodetected by the codec.
Fixes: b8b88b7087 ("ASoC: add es8316 codec driver")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230530181140.483936-3-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The following error occurs when trying to restore a previously saved
ALSA mixer state (tested on a Rock 5B board):
$ alsactl --no-ucm -f /tmp/asound.state store hw:Analog
$ alsactl --no-ucm -I -f /tmp/asound.state restore hw:Analog
alsactl: set_control:1475: Cannot write control '2:0:0:ALC Capture Target Volume:0' : Invalid argument
According to ES8316 datasheet, the register at address 0x2B, which is
related to the above mixer control, contains by default the value 0xB0.
Considering the corresponding ALC target bits (ALCLVL) are 7:4, the
control is initialized with 11, which is one step above the maximum
value allowed by the driver:
ALCLVL | dB gain
-------+--------
0000 | -16.5
0001 | -15.0
0010 | -13.5
.... | .....
0111 | -6.0
1000 | -4.5
1001 | -3.0
1010 | -1.5
.... | .....
1111 | -1.5
The tests performed using the VU meter feature (--vumeter=TYPE) of
arecord/aplay confirm the specs are correct and there is no measured
gain if the 1011-1111 range would have been mapped to 0 dB:
dB gain | VU meter %
--------+-----------
-6.0 | 30-31
-4.5 | 35-36
-3.0 | 42-43
-1.5 | 50-51
0.0 | 50-51
Increment the max value allowed for ALC Capture Target Volume control,
so that it matches the hardware default. Additionally, update the
related TLV to prevent an artificial extension of the dB gain range.
Fixes: b8b88b7087 ("ASoC: add es8316 codec driver")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230530181140.483936-2-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
The topology file and the machine driver rely on common definitions
for the dailink stream_name. To avoid any backwards-compatibility
problems, the machine driver stream names are set in stone and cannot
be modified.
This is problematic when we try to name some of the topology widgets
after the stream_name, since the widget name is limited to 44
characters
tools/include/uapi/sound/asound.h:#define SNDRV_CTL_ELEM_ID_NAME_MAXLEN 44
Existing examples include "Analog Playback and Capture" for HDaudio
dailinks, which leaves less than 20 chars to identify widgets/controls
with a meaningful name.
Since the 44-char limit is part of the UAPI definitions, we assumed
there is no way to increase it.
This patchset suggests instead a partial match which allows topology
files to use a shorter stream_name, which in turn allows for
self-explanatory widget names that comply with the 44-char limit.
This should not break any existing setup but with the introduction of
a partial match new dailinks should be named carefully to avoid
confusions between e.g. 'link1' and 'link10'. The last patch fixes
such an issue in the 'nocodec' test topology used by Intel.
With a common kernel config for nocodec and codec modes, the number of DAI
drivers will be set to 15 for nocodec as well. So adjust this when set
the machine params for the nocodec mode if the debug flag is set.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230526204149.456068-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This allows setting shorter names for the widget stream names in
topology. For example, in the case of HDA Analog DAI link, the stream
name is "Analog Playback and Capture". But it is enough to match "Analog"
in the DAI link stream name with a widget's stream name. This is needed
to set more meaningful names for the DAI widgets using the stream name
in topology.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230526204149.456068-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This allows for setting shorter link names in topology. For example,
for the HDA Analog DAI link, just "Analog" would suffice instead of
"Analog Playback and Capture"
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230526204149.456068-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use pcm_for_each_format for the PCM format iteration and fix the
following sparse warnings.
sound/soc/ti/davinci-mcasp.c:1336:26: sparse: warning: restricted snd_pcm_format_t degrades to integer
sound/soc/ti/davinci-mcasp.c:1358:26: sparse: warning: restricted snd_pcm_format_t degrades to integer
sound/soc/ti/davinci-mcasp.c:1438:26: sparse: warning: restricted snd_pcm_format_t degrades to integer
No functional changes.
Signed-off-by: Min-Hua Chen <minhuadotchen@gmail.com>
Link: https://lore.kernel.org/r/20230519211636.3699-1-minhuadotchen@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have SOF and generic ACP support enabled for Vangogh platform
on some machines. Since we have same PCI id used for probing,
add check for machine configuration flag to avoid conflict with
newer pci drivers. Such machine flag has been initialized via
dmi match on few Vangogh based machines. If no flag is
specified probe and register older platform device.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://lore.kernel.org/r/20230530110802.674939-1-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add mt8188 dai driver and specify of_machine to support mt8188 audio.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Yaochun Hung <yc.hung@mediatek.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230523025933.30494-2-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add entries for Positivo laptops: CW14Q01P, K1424G, N14ZP74G to the
DMI table, so that active-high jack-detect will work properly on
these laptops.
Signed-off-by: Edson Juliano Drosdeck <edson.drosdeck@gmail.com>
Link: https://lore.kernel.org/r/20230529181911.632851-1-edson.drosdeck@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Sending the mutex address(acp_lock) as platform
data during ACP PDM platform driver register sequence,
its creating copy of the platform data.
Referencing this platform data in ACP PDM driver results
incorrect reference to the common lock usage.
Instead of directly passing the lock address as platform
data, retrieve it from parent driver data structure
and use the same lock reference in ACP PDM driver.
Fixes: 45aa83cb93 ("ASoC: amd: ps: use acp_lock to protect common registers in pdm driver")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230525113000.1290758-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the error path, a of_node_put() for platform is missing.
Just add it.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20230523151223.109551-9-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add 4.8Mhz 9.6Mhz and 19.2MHz SCLK values
for MCLK 12MHz and 12.288MHz requested by Intel.
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230524125236.57149-1-vitalyr@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
