We no longer support HIGHPTE allocations, so ptes should always be
within the kernel's direct map, and don't need pagetable walks
to convert to machine addresses.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
xen_set_pte_at and xen_clear_pte are essentially identical to
xen_set_pte, so just make them all common.
When batched set_pte and pte_clear are the same, but the unbatch operation
must be different: they need to update the two halves of the pte in
different order.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
In principle update_va_mapping is a good match for set_pte_at, since
it gets the address being mapped, which allows Xen to use its linear
pagetable mapping.
However that assumes that the pmd for the address is attached to the
current pagetable, which may not be true for a given user address space
because the kernel pmd is not shared (at least on 32-bit guests).
Normally the kernel will automatically sync a missing part of the
pagetable with the init_mm pagetable transparently via faults, but that
fails when a missing address is passed to Xen.
And while the linear pagetable mapping is very useful for 32-bit Xen
(as it avoids an explicit domain mapping), 32-bit Xen is deprecated.
64-bit Xen has all memory mapped all the time, so it makes no real
difference.
The upshot is that we should use mmu_update, since it can operate on
non-current pagetables or detached pagetables.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Xen can work out when we're doing IO mappings for itself, so we don't
need to do anything special, and the extra tests just clog things up.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1446 commits)
macvlan: fix panic if lowerdev in a bond
tg3: Add braces around 5906 workaround.
tg3: Fix NETIF_F_LOOPBACK error
macvlan: remove one synchronize_rcu() call
networking: NET_CLS_ROUTE4 depends on INET
irda: Fix error propagation in ircomm_lmp_connect_response()
irda: Kill set but unused variable 'bytes' in irlan_check_command_param()
irda: Kill set but unused variable 'clen' in ircomm_connect_indication()
rxrpc: Fix set but unused variable 'usage' in rxrpc_get_transport()
be2net: Kill set but unused variable 'req' in lancer_fw_download()
irda: Kill set but unused vars 'saddr' and 'daddr' in irlan_provider_connect_indication()
atl1c: atl1c_resume() is only used when CONFIG_PM_SLEEP is defined.
rxrpc: Fix set but unused variable 'usage' in rxrpc_get_peer().
rxrpc: Kill set but unused variable 'local' in rxrpc_UDP_error_handler()
rxrpc: Kill set but unused variable 'sp' in rxrpc_process_connection()
rxrpc: Kill set but unused variable 'sp' in rxrpc_rotate_tx_window()
pkt_sched: Kill set but unused variable 'protocol' in tc_classify()
isdn: capi: Use pr_debug() instead of ifdefs.
tg3: Update version to 3.119
tg3: Apply rx_discards fix to 5719/5720
...
Fix up trivial conflicts in arch/x86/Kconfig and net/mac80211/agg-tx.c
as per Davem.
Commit e66eed651f ("list: remove prefetching from regular list
iterators") removed the include of prefetch.h from list.h, which
uncovered several cases that had apparently relied on that rather
obscure header file dependency.
So this fixes things up a bit, using
grep -L linux/prefetch.h $(git grep -l '[^a-z_]prefetchw*(' -- '*.[ch]')
grep -L 'prefetchw*(' $(git grep -l 'linux/prefetch.h' -- '*.[ch]')
to guide us in finding files that either need <linux/prefetch.h>
inclusion, or have it despite not needing it.
There are more of them around (mostly network drivers), but this gets
many core ones.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
IBS initialization is a mix of per-core register access and per-node
pci device setup. Register access should be pinned to the cpu, but pci
setup must run with preemption enabled.
This patch better separates the code into non-/preemptible sections
and fixes sleeping with preemption disabled. See bug message below.
Fixes also freeing the eilvt entry by introducing put_eilvt().
BUG: sleeping function called from invalid context at mm/slub.c:824
in_atomic(): 1, irqs_disabled(): 0, pid: 32357, name: modprobe
INFO: lockdep is turned off.
Pid: 32357, comm: modprobe Not tainted 2.6.39-rc7+ #14
Call Trace:
[<ffffffff8104bdc8>] __might_sleep+0x112/0x117
[<ffffffff81129693>] kmem_cache_alloc_trace+0x4b/0xe7
[<ffffffff81278f14>] kzalloc.constprop.0+0x29/0x2b
[<ffffffff81278f4c>] pci_get_subsys+0x36/0x78
[<ffffffff81022689>] ? setup_APIC_eilvt+0xfb/0x139
[<ffffffff81278fa4>] pci_get_device+0x16/0x18
[<ffffffffa06c8b5d>] op_amd_init+0xd3/0x211 [oprofile]
[<ffffffffa064d000>] ? 0xffffffffa064cfff
[<ffffffffa064d298>] op_nmi_init+0x21e/0x26a [oprofile]
[<ffffffffa064d062>] oprofile_arch_init+0xe/0x26 [oprofile]
[<ffffffffa064d010>] oprofile_init+0x10/0x42 [oprofile]
[<ffffffff81002099>] do_one_initcall+0x7f/0x13a
[<ffffffff81096524>] sys_init_module+0x132/0x281
[<ffffffff814cc682>] system_call_fastpath+0x16/0x1b
Reported-by: Dave Jones <davej@redhat.com>
Cc: <stable@kernel.org> [2.6.37.x]
Signed-off-by: Robert Richter <robert.richter@amd.com>
In the case of x2apic cluster mode we can group IPI register
writes based on the cluster group instead of individual per-cpu
destination messages.
This reduces the apic register writes and reduces the amount of
IPI messages (in the best case we can reduce it by a factor of
16).
With this change, the cost of flush_tlb_others(), with the flush
tlb IPI being sent from a cpu in the socket-1 to all the logical
cpus in socket-2 (on a Westmere-EX system that has 20 logical
cpus in a socket) is 3x times better now (compared to the former
'send one-by-one' algorithm).
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: steiner@sgi.com
Cc: yinghai@kernel.org
Link: http://lkml.kernel.org/r/20110519234637.512271057@sbsiddha-MOBL3.sc.intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In the case of x2apic cluster mode, we can group IPI register
writes based on the cluster group instead of individual per-cpu
destination messages.
For this purpose, track the cpu's that belong to the same x2apic
cluster.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: steiner@sgi.com
Cc: yinghai@kernel.org
Link: http://lkml.kernel.org/r/20110519234637.421800999@sbsiddha-MOBL3.sc.intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Use the unused probe routine in the apic driver to finalize the
apic model selection. This cleans up the
default_setup_apic_routing() and this probe routine in future
can also be used for doing any apic model specific
initialisation.
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: steiner@sgi.com
Cc: yinghai@kernel.org
Link: http://lkml.kernel.org/r/20110519234637.247458931@sbsiddha-MOBL3.sc.intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Code flow for enabling interrupt-remapping has its own routines
for saving and restoring io-apic RTE's. ioapic suspend/resume
code flow also has similar routines. Remove the duplicate code.
Tested-by: Daniel J Blueman <daniel.blueman@gmail.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Link: http://lkml.kernel.org/r/20110518233157.673130611@sbsiddha-MOBL3.sc.intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Code flow for enabling interrupt-remapping was
allocating/freeing buffers for saving/restoring io-apic RTE's.
ioapic suspend/resume code uses boot time allocated
ioapic_saved_data that is a perfect match for reuse here.
This will remove the unnecessary allocation/free of the
temporary buffers during suspend/resume of interrupt-remapping
enabled platforms aswell as paving the way for further code
consolidation.
Tested-by: Daniel J Blueman <daniel.blueman@gmail.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Link: http://lkml.kernel.org/r/20110518233157.574469296@sbsiddha-MOBL3.sc.intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This allows re-using this buffer for enabling
interrupt-remapping during boot and resume. And thus allow for
consolidating the code between ioapic suspend/resume and
interrupt-remapping.
Tested-by: Daniel J Blueman <daniel.blueman@gmail.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Link: http://lkml.kernel.org/r/20110518233157.481404505@sbsiddha-MOBL3.sc.intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fix a potential deadlock when resuming; here the calling
function has disabled interrupts, so we cannot sleep.
Change the memory allocation flag from GFP_KERNEL to GFP_ATOMIC.
TODO: We can do away with this memory allocation during resume
by reusing the ioapic suspend/resume code that uses boot time
allocated buffers, but we want to keep this -stable patch
simple.
Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: <stable@kernel.org> # v2.6.38/39
Link: http://lkml.kernel.org/r/20110518233157.385970138@sbsiddha-MOBL3.sc.intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The workaround for Bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=33012
introduced a read and a write to the MC4 mask msr.
Unfortunatly this MSR is not emulated by the KVM hypervisor
so that the kernel will get a #GP and crashes when applying
this workaround when running inside KVM.
This issue was reported as:
https://bugzilla.kernel.org/show_bug.cgi?id=35132
and is fixed with this patch. The change just let the kernel
ignore any #GP it gets while accessing this MSR by using the
_safe msr access methods.
Reported-by: Török Edwin <edwintorok@gmail.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Maciej Rutecki <maciej.rutecki@gmail.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: <stable@kernel.org> # .39.x
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (44 commits)
debugfs: Silence DEBUG_STRICT_USER_COPY_CHECKS=y warning
sysfs: remove "last sysfs file:" line from the oops messages
drivers/base/memory.c: fix warning due to "memory hotplug: Speed up add/remove when blocks are larger than PAGES_PER_SECTION"
memory hotplug: Speed up add/remove when blocks are larger than PAGES_PER_SECTION
SYSFS: Fix erroneous comments for sysfs_update_group().
driver core: remove the driver-model structures from the documentation
driver core: Add the device driver-model structures to kerneldoc
Translated Documentation/email-clients.txt
RAW driver: Remove call to kobject_put().
reboot: disable usermodehelper to prevent fs access
efivars: prevent oops on unload when efi is not enabled
Allow setting of number of raw devices as a module parameter
Introduce CONFIG_GOOGLE_FIRMWARE
driver: Google Memory Console
driver: Google EFI SMI
x86: Better comments for get_bios_ebda()
x86: get_bios_ebda_length()
misc: fix ti-st build issues
params.c: Use new strtobool function to process boolean inputs
debugfs: move to new strtobool
...
Fix up trivial conflicts in fs/debugfs/file.c due to the same patch
being applied twice, and an unrelated cleanup nearby.
* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: Introduce pci_map_biosrom()
x86, olpc: Use device tree for platform identification
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (50 commits)
x86, mm: Allow ZONE_DMA to be configurable
x86, NUMA: Trim numa meminfo with max_pfn in a separate loop
x86, NUMA: Rename setup_node_bootmem() to setup_node_data()
x86, NUMA: Enable emulation on 32bit too
x86, NUMA: Enable CONFIG_AMD_NUMA on 32bit too
x86, NUMA: Rename amdtopology_64.c to amdtopology.c
x86, NUMA: Make numa_init_array() static
x86, NUMA: Make 32bit use common NUMA init path
x86, NUMA: Initialize and use remap allocator from setup_node_bootmem()
x86-32, NUMA: Add @start and @end to init_alloc_remap()
x86, NUMA: Remove long 64bit assumption from numa.c
x86, NUMA: Enable build of generic NUMA init code on 32bit
x86, NUMA: Move NUMA init logic from numa_64.c to numa.c
x86-32, NUMA: Update numaq to use new NUMA init protocol
x86-32, NUMA: Replace srat_32.c with srat.c
x86-32, NUMA: implement temporary NUMA init shims
x86, NUMA: Move numa_nodes_parsed to numa.[hc]
x86-32, NUMA: Move get_memcfg_numa() into numa_32.c
x86, NUMA: make srat.c 32bit safe
x86, NUMA: rename srat_64.c to srat.c
...
* 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, efi: Ensure that the entirity of a region is mapped
x86, efi: Pass a minimal map to SetVirtualAddressMap()
x86, efi: Merge contiguous memory regions of the same type and attribute
x86, efi: Consolidate EFI nx control
x86, efi: Remove virtual-mode SetVirtualAddressMap call
* 'x86-gart-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, gart: Don't enforce GART aperture lower-bound by alignment
* 'x86-irq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: Don't unmask disabled irqs when migrating them
x86: Skip migrating IRQF_PER_CPU irqs in fixup_irqs()
* 'x86-mce-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, mce: Drop the default decoding notifier
x86, MCE: Do not taint when handling correctable errors
* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, cpu: Fix detection of Celeron Covington stepping A1 and B0
Documentation, ABI: Update L3 cache index disable text
x86, AMD, cacheinfo: Fix L3 cache index disable checks
x86, AMD, cacheinfo: Fix fallout caused by max3 conversion
x86, cpu: Change NOP selection for certain Intel CPUs
x86, cpu: Clean up and unify the NOP selection infrastructure
x86, percpu: Use ASM_NOP4 instead of hardcoding P6_NOP4
x86, cpu: Move AMD Elan Kconfig under "Processor family"
Fix up trivial conflicts in alternative handling (commit dc326fca2b
"x86, cpu: Clean up and unify the NOP selection infrastructure" removed
some hacky 5-byte instruction stuff, while commit d430d3d7e6 "jump
label: Introduce static_branch() interface" renamed HAVE_JUMP_LABEL to
CONFIG_JUMP_LABEL in the code that went away)
* 'timers-clockevents-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: hpet: Cleanup the clockevents init and register code
x86: Convert PIT to clockevents_config_and_register()
clockevents: Provide interface to reconfigure an active clock event device
clockevents: Provide combined configure and register function
clockevents: Restructure clock_event_device members
clocksource: Get rid of the hardcoded 5 seconds sleep time limit
clocksource: Restructure clocksource struct members
* 'timers-clocksource-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
clocksource: convert mips to generic i8253 clocksource
clocksource: convert x86 to generic i8253 clocksource
clocksource: convert footbridge to generic i8253 clocksource
clocksource: add common i8253 PIT clocksource
blackfin: convert to clocksource_register_hz
mips: convert to clocksource_register_hz/khz
sparc: convert to clocksource_register_hz/khz
alpha: convert to clocksource_register_hz
microblaze: convert to clocksource_register_hz/khz
ia64: convert to clocksource_register_hz/khz
x86: Convert remaining x86 clocksources to clocksource_register_hz/khz
Make clocksource name const
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (60 commits)
sched: Fix and optimise calculation of the weight-inverse
sched: Avoid going ahead if ->cpus_allowed is not changed
sched, rt: Update rq clock when unthrottling of an otherwise idle CPU
sched: Remove unused parameters from sched_fork() and wake_up_new_task()
sched: Shorten the construction of the span cpu mask of sched domain
sched: Wrap the 'cfs_rq->nr_spread_over' field with CONFIG_SCHED_DEBUG
sched: Remove unused 'this_best_prio arg' from balance_tasks()
sched: Remove noop in alloc_rt_sched_group()
sched: Get rid of lock_depth
sched: Remove obsolete comment from scheduler_tick()
sched: Fix sched_domain iterations vs. RCU
sched: Next buddy hint on sleep and preempt path
sched: Make set_*_buddy() work on non-task entities
sched: Remove need_migrate_task()
sched: Move the second half of ttwu() to the remote cpu
sched: Restructure ttwu() some more
sched: Rename ttwu_post_activation() to ttwu_do_wakeup()
sched: Remove rq argument from ttwu_stat()
sched: Remove rq->lock from the first half of ttwu()
sched: Drop rq->lock from sched_exec()
...
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
sched: Fix rt_rq runtime leakage bug
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (107 commits)
perf stat: Add more cache-miss percentage printouts
perf stat: Add -d -d and -d -d -d options to show more CPU events
ftrace/kbuild: Add recordmcount files to force full build
ftrace: Add self-tests for multiple function trace users
ftrace: Modify ftrace_set_filter/notrace to take ops
ftrace: Allow dynamically allocated function tracers
ftrace: Implement separate user function filtering
ftrace: Free hash with call_rcu_sched()
ftrace: Have global_ops store the functions that are to be traced
ftrace: Add ops parameter to ftrace_startup/shutdown functions
ftrace: Add enabled_functions file
ftrace: Use counters to enable functions to trace
ftrace: Separate hash allocation and assignment
ftrace: Create a global_ops to hold the filter and notrace hashes
ftrace: Use hash instead for FTRACE_FL_FILTER
ftrace: Replace FTRACE_FL_NOTRACE flag with a hash of ignored functions
perf bench, x86: Add alternatives-asm.h wrapper
x86, 64-bit: Fix copy_[to/from]_user() checks for the userspace address limit
x86, mem: memset_64.S: Optimize memset by enhanced REP MOVSB/STOSB
x86, mem: memmove_64.S: Optimize memmove by enhanced REP MOVSB/STOSB
...
* 'core-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, gart: Rename pci-gart_64.c to amd_gart_64.c
x86/amd-iommu: Use threaded interupt handler
arch/x86/kernel/pci-iommu_table.c: Convert sprintf_symbol to %pS
x86/amd-iommu: Add support for invalidate_all command
x86/amd-iommu: Add extended feature detection
x86/amd-iommu: Add ATS enable/disable code
x86/amd-iommu: Add flag to indicate IOTLB support
x86/amd-iommu: Flush device IOTLB if ATS is enabled
x86/amd-iommu: Select PCI_IOV with AMD IOMMU driver
PCI: Move ATS declarations in seperate header file
dma-debug: print information about leaked entry
x86/amd-iommu: Flush all internal TLBs when IOMMUs are enabled
x86/amd-iommu: Rename iommu_flush_device
x86/amd-iommu: Improve handling of full command buffer
x86/amd-iommu: Rename iommu_flush* to domain_flush*
x86/amd-iommu: Remove command buffer resetting logic
x86/amd-iommu: Cleanup completion-wait handling
x86/amd-iommu: Cleanup inv_pages command handling
x86/amd-iommu: Move inv-dte command building to own function
x86/amd-iommu: Move compl-wait command building to own function
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: (34 commits)
PM: Introduce generic prepare and complete callbacks for subsystems
PM: Allow drivers to allocate memory from .prepare() callbacks safely
PM: Remove CONFIG_PM_VERBOSE
Revert "PM / Hibernate: Reduce autotuned default image size"
PM / Hibernate: Add sysfs knob to control size of memory for drivers
PM / Wakeup: Remove useless synchronize_rcu() call
kmod: always provide usermodehelper_disable()
PM / ACPI: Remove acpi_sleep=s4_nonvs
PM / Wakeup: Fix build warning related to the "wakeup" sysfs file
PM: Print a warning if firmware is requested when tasks are frozen
PM / Runtime: Rework runtime PM handling during driver removal
Freezer: Use SMP barriers
PM / Suspend: Do not ignore error codes returned by suspend_enter()
PM: Fix build issue in clock_ops.c for CONFIG_PM_RUNTIME unset
PM: Revert "driver core: platform_bus: allow runtime override of dev_pm_ops"
OMAP1 / PM: Use generic clock manipulation routines for runtime PM
PM: Remove sysdev suspend, resume and shutdown operations
PM / PowerPC: Use struct syscore_ops instead of sysdevs for PM
PM / UNICORE32: Use struct syscore_ops instead of sysdevs for PM
PM / AVR32: Use struct syscore_ops instead of sysdevs for PM
...
* 'stable/irq' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen: do not clear and mask evtchns in __xen_evtchn_do_upcall
* 'stable/p2m.bugfixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen/p2m: Create entries in the P2M_MFN trees's to track 1-1 mappings
* 'stable/e820.bugfixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen/setup: Fix for incorrect xen_extra_mem_start initialization under 32-bit
xen/setup: Ignore E820_UNUSABLE when setting 1-1 mappings.
* 'stable/mmu.bugfixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen mmu: fix a race window causing leave_mm BUG()
* 'stable/backend.base.v3' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen/pci: Fix compiler error when CONFIG_XEN_PRIVILEGED_GUEST is not set.
xen/p2m: Add EXPORT_SYMBOL_GPL to the M2P override functions.
xen/p2m/m2p/gnttab: Support GNTMAP_host_map in the M2P override.
xen/irq: The Xen hypervisor cleans up the PIRQs if the other domain forgot.
xen/irq: Export 'xen_pirq_from_irq' function.
xen/irq: Add support to check if IRQ line is shared with other domains.
xen/irq: Check if the PCI device is owned by a domain different than DOMID_SELF.
xen/pci: Add xen_[find|register|unregister]_device_domain_owner functions.
* 'stable/gntalloc.v7' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen/gntdev,gntalloc: Remove unneeded VM flags
* 'docs-move' of git://git.kernel.org/pub/scm/linux/kernel/git/rdunlap/linux-docs:
Correct occurrences of - Documentation/kvm/ to Documentation/virtual/kvm - Documentation/uml/ to Documentation/virtual/uml - Documentation/lguest/ to Documentation/virtual/lguest throughout the kernel source tree.
Add a 00-INDEX file to Documentation/virtual Remove uml from the top level 00-INDEX file.
Move kvm, uml, and lguest subdirectories under a common "virtual" directory, I.E:
Cleanup code/data sections definitions
accordingly to include/linux/init.h.
Signed-off-by: Daniel Kiper <dkiper@net-space.pl>
[v1: Rebased on top of latest linus's to include fixes in mmu.c]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
It doesn't make sense to unconditionally unmask a disabled irq when
migrating it from offlined cpu to another. If the irq triggers then it
will be disabled in the interrupt handler anyway. So we can just avoid
unmasking it.
[ tglx: Made masking unconditional again and fixed the changelog ]
Signed-off-by: Fengzhe Zhang <fengzhe.zhang@intel.com>
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
Cc: Ian Campbell <Ian.Campbell@citrix.com>
Cc: Jan Beulich <JBeulich@novell.com>
Cc: "xen-devel@lists.xensource.com" <xen-devel@lists.xensource.com>
Link: http://lkml.kernel.org/r/%3C625BA99ED14B2D499DC4E29D8138F1505C8ED7F7E3%40shsmsx502.ccr.corp.intel.com%3E
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
IRQF_PER_CPU means that the irq cannot be moved away from a given
cpu. So it must not be migrated when the cpu goes offline.
[ tglx: massaged changelog ]
Signed-off-by: Fengzhe Zhang <fengzhe.zhang@intel.com>
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
Cc: Ian Campbell <Ian.Campbell@citrix.com>
Cc: Jan Beulich <JBeulich@novell.com>
Cc: "xen-devel@lists.xensource.com" <xen-devel@lists.xensource.com>
Link: http://lkml.kernel.org/r/%3C625BA99ED14B2D499DC4E29D8138F1505C8ED7F7E2%40shsmsx502.ccr.corp.intel.com%3E
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
No need to recalculate the frequency and the conversion factors over
and over. Calculate the frequency once and use the new config/register
interface and let the core code do the math.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Link: http://lkml.kernel.org/r/%3C20110518210136.646482357%40linutronix.de%3E
As reported in BZ #30352:
https://bugzilla.kernel.org/show_bug.cgi?id=30352
there's a kernel bug related to reading the last allowed page on x86_64.
The _copy_to_user() and _copy_from_user() functions use the following
check for address limit:
if (buf + size >= limit)
fail();
while it should be more permissive:
if (buf + size > limit)
fail();
That's because the size represents the number of bytes being
read/write from/to buf address AND including the buf address.
So the copy function will actually never touch the limit
address even if "buf + size == limit".
Following program fails to use the last page as buffer
due to the wrong limit check:
#include <sys/mman.h>
#include <sys/socket.h>
#include <assert.h>
#define PAGE_SIZE (4096)
#define LAST_PAGE ((void*)(0x7fffffffe000))
int main()
{
int fds[2], err;
void * ptr = mmap(LAST_PAGE, PAGE_SIZE, PROT_READ | PROT_WRITE,
MAP_ANONYMOUS | MAP_PRIVATE | MAP_FIXED, -1, 0);
assert(ptr == LAST_PAGE);
err = socketpair(AF_LOCAL, SOCK_STREAM, 0, fds);
assert(err == 0);
err = send(fds[0], ptr, PAGE_SIZE, 0);
perror("send");
assert(err == PAGE_SIZE);
err = recv(fds[1], ptr, PAGE_SIZE, MSG_WAITALL);
perror("recv");
assert(err == PAGE_SIZE);
return 0;
}
The other place checking the addr limit is the access_ok() function,
which is working properly. There's just a misleading comment
for the __range_not_ok() macro - which this patch fixes as well.
The last page of the user-space address range is a guard page and
Brian Gerst observed that the guard page itself due to an erratum on K8 cpus
(#121 Sequential Execution Across Non-Canonical Boundary Causes Processor
Hang).
However, the test code is using the last valid page before the guard page.
The bug is that the last byte before the guard page can't be read
because of the off-by-one error. The guard page is left in place.
This bug would normally not show up because the last page is
part of the process stack and never accessed via syscalls.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Brian Gerst <brgerst@gmail.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@kernel.org>
Link: http://lkml.kernel.org/r/1305210630-7136-1-git-send-email-jolsa@redhat.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
perf evlist: Fix per thread mmap setup
perf tools: Honour the cpu list parameter when also monitoring a thread list
kprobes, x86: Disable irqs during optimized callback
Enable/disable newly documented SMEP (Supervisor Mode Execution Protection) CPU
feature in kernel. CR4.SMEP (bit 20) is 0 at power-on. If the feature is
supported by CPU (X86_FEATURE_SMEP), enable SMEP by setting CR4.SMEP. New kernel
option nosmep disables the feature even if the feature is supported by CPU.
[ hpa: moved the call to setup_smep() until after the vendor-specific
initialization; that ensures that CPUID features are unmasked. We
will still run it before we have userspace (never mind uncontrolled
userspace). ]
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
LKML-Reference: <1305157865-31727-1-git-send-email-fenghua.yu@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Add support for newly documented SMEP (Supervisor Mode Execution Protection)
CPU feature in CR4.
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
LKML-Reference: <1305683069-25394-3-git-send-email-fenghua.yu@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Add support for newly documented SMEP (Supervisor Mode Execution Protection) CPU
feature flag.
SMEP prevents the CPU in kernel-mode to jump to an executable page
that has the user flag set in the PTE. This prevents the kernel from
executing user-space code accidentally or maliciously, so it for
example prevents kernel exploits from jumping to specially prepared
user-mode shell code.
[ hpa: added better description by Ingo Molnar ]
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
LKML-Reference: <1305683069-25394-2-git-send-email-fenghua.yu@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Fix build error on i386 by moving function prototypes:
arch/x86/crypto/aesni-intel_glue.c: In function 'aesni_init':
arch/x86/crypto/aesni-intel_glue.c:1263: error: implicit declaration of function 'crypto_fpu_init'
arch/x86/crypto/aesni-intel_glue.c: In function 'aesni_exit':
arch/x86/crypto/aesni-intel_glue.c:1373: error: implicit declaration of function 'crypto_fpu_exit'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Support memset() with enhanced rep stosb. On processors supporting enhanced
REP MOVSB/STOSB, the alternative memset_c_e function using enhanced rep stosb
overrides the fast string alternative memset_c and the original function.
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: http://lkml.kernel.org/r/1305671358-14478-10-git-send-email-fenghua.yu@intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Support memmove() by enhanced rep movsb. On processors supporting enhanced
REP MOVSB/STOSB, the alternative memmove() function using enhanced rep movsb
overrides the original function.
The patch doesn't change the backward memmove case to use enhanced rep
movsb.
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: http://lkml.kernel.org/r/1305671358-14478-9-git-send-email-fenghua.yu@intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Support memcpy() with enhanced rep movsb. On processors supporting enhanced
rep movsb, the alternative memcpy() function using enhanced rep movsb overrides the original function and the fast string
function.
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: http://lkml.kernel.org/r/1305671358-14478-8-git-send-email-fenghua.yu@intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Support copy_to_user/copy_from_user() by enhanced REP MOVSB/STOSB.
On processors supporting enhanced REP MOVSB/STOSB, the alternative
copy_user_enhanced_fast_string function using enhanced rep movsb overrides the
original function and the fast string function.
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: http://lkml.kernel.org/r/1305671358-14478-7-git-send-email-fenghua.yu@intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Intel processors are adding enhancements to REP MOVSB/STOSB and the use of
REP MOVSB/STOSB for optimal memcpy/memset or similar functions is recommended.
Enhancement availability is indicated by CPUID.7.0.EBX[9] (Enhanced REP MOVSB/
STOSB).
Support clear_page() with rep stosb for processor supporting enhanced REP MOVSB
/STOSB. On processors supporting enhanced REP MOVSB/STOSB, the alternative
clear_page_c_e function using enhanced REP STOSB overrides the original function
and the fast string function.
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: http://lkml.kernel.org/r/1305671358-14478-6-git-send-email-fenghua.yu@intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Add altinstruction_entry macro to generate .altinstructions section
entries from assembly code. This should be less failure-prone than
open-coding.
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: http://lkml.kernel.org/r/1305671358-14478-5-git-send-email-fenghua.yu@intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Some string operation functions may be patched twice, e.g. on enhanced REP MOVSB
/STOSB processors, memcpy is patched first by fast string alternative function,
then it is patched by enhanced REP MOVSB/STOSB alternative function.
Add comment for applying alternatives order to warn people who may change the
applying alternatives order for any reason.
[ Documentation-only patch ]
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: http://lkml.kernel.org/r/1305671358-14478-4-git-send-email-fenghua.yu@intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
If kernel intends to use enhanced REP MOVSB/STOSB, it must ensure
IA32_MISC_ENABLE.Fast_String_Enable (bit 0) is set and CPUID.(EAX=07H, ECX=0H):
EBX[bit 9] also reports 1.
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: http://lkml.kernel.org/r/1305671358-14478-3-git-send-email-fenghua.yu@intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Intel processors are adding enhancements to REP MOVSB/STOSB and the use of
REP MOVSB/STOSB for optimal memcpy/memset or similar functions is recommended.
Enhancement availability is indicated by CPUID.7.0.EBX[9] (Enhanced REP MOVSB/
STOSB).
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: http://lkml.kernel.org/r/1305671358-14478-2-git-send-email-fenghua.yu@intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
* syscore:
PM: Remove sysdev suspend, resume and shutdown operations
PM / PowerPC: Use struct syscore_ops instead of sysdevs for PM
PM / UNICORE32: Use struct syscore_ops instead of sysdevs for PM
PM / AVR32: Use struct syscore_ops instead of sysdevs for PM
PM / Blackfin: Use struct syscore_ops instead of sysdevs for PM
ARM / Samsung: Use struct syscore_ops for "core" power management
ARM / PXA: Use struct syscore_ops for "core" power management
ARM / SA1100: Use struct syscore_ops for "core" power management
ARM / Integrator: Use struct syscore_ops for core PM
ARM / OMAP: Use struct syscore_ops for "core" power management
ARM: Use struct syscore_ops instead of sysdevs for PM in common code
acpi_sleep=s4_nonvs is superseded by acpi_sleep=nonvs, so remove it.
Signed-off-by: WANG Cong <amwang@redhat.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Len Brown <lenb@kernel.org>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
CPUID leaf 7, subleaf 0 returns the maximum subleaf in EAX, not the
number of subleaves. Since so far only subleaf 0 is defined (and only
the EBX bitfield) we do not need to qualify the test.
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: http://lkml.kernel.org/r/1305660806-17519-1-git-send-email-fenghua.yu@intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: <stable@kernel.org> 2.6.36..39
Trying to enable the local APIC timer on early K8 revisions
uncovers a number of other issues with it, in conjunction with
the C1E enter path on AMD. Fixing those causes much more churn
and troubles than the benefit of using that timer brings so
don't enable it on K8 at all, falling back to the original
functionality the kernel had wrt to that.
Reported-and-bisected-by: Nick Bowler <nbowler@elliptictech.com>
Cc: Boris Ostrovsky <Boris.Ostrovsky@amd.com>
Cc: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Cc: Hans Rosenfeld <hans.rosenfeld@amd.com>
Cc: Nick Bowler <nbowler@elliptictech.com>
Cc: Joerg-Volker-Peetz <jvpeetz@web.de>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Link: http://lkml.kernel.org/r/1305636919-31165-3-git-send-email-bp@amd64.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This reverts commit e20a2d205c, as it crashes
certain boxes with specific AMD CPU models.
Moving the lower endpoint of the Erratum 400 check to accomodate
earlier K8 revisions (A-E) opens a can of worms which is simply
not worth to fix properly by tweaking the errata checking
framework:
* missing IntPenging MSR on revisions < CG cause #GP:
http://marc.info/?l=linux-kernel&m=130541471818831
* makes earlier revisions use the LAPIC timer instead of the C1E
idle routine which switches to HPET, thus not waking up in
deeper C-states:
http://lkml.org/lkml/2011/4/24/20
Therefore, leave the original boundary starting with K8-revF.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
ZONE_DMA is unnecessary for a large number of machines that do not
require less than 32-bit DMA addressing, e.g. ISA legacy DMA or PCI
cards with a restricted DMA address mask.
This patch allows users to disable ZONE_DMA for x86 if they know they
will not be using such devices with their kernel.
This prevents the VM from unnecessarily reserving a ratio of memory
(defaulting to 1/256th of system capacity) with lowmem_reserve_ratio
for such allocations when it will never be used.
Signed-off-by: David Rientjes <rientjes@google.com>
Link: http://lkml.kernel.org/r/alpine.DEB.2.00.1105161353560.4353@chino.kir.corp.google.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Steppings A1 and B0 of Celeron Covington are currently misdetected as
Pentium II (Dixon). Fix it by removing the stepping check.
[ hpa: this fixes this specific bug... the CPUID documentation
specifies that the L2 cache size can disambiguate additional CPUs;
this patch does not fix that. ]
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Link: http://lkml.kernel.org/r/201105162138.15416.linux@rainbow-software.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Do the mcount offset adjustment in the recordmcount.pl/recordmcount.[ch]
at compile time and not in ftrace_call_adjust at run time.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The section called .discard.text has tracing attached to it and is
currently ignored by ftrace. But it does include a call to the mcount
stub. Adding a notrace to the code keeps gcc from adding the useless
mcount caller to it.
Link: http://lkml.kernel.org/r/20110421023739.243651696@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
We provide two slots to disable cache indices, and have a check to
prevent both slots to be used for the same index.
If the user disables the same index on different subcaches, both slots
will hold the same index, e.g.
$ echo 2047 > /sys/devices/system/cpu/cpu0/cache/index3/cache_disable_0
$ cat /sys/devices/system/cpu/cpu0/cache/index3/cache_disable_0
2047
$ echo 1050623 > /sys/devices/system/cpu/cpu0/cache/index3/cache_disable_1
$ cat /sys/devices/system/cpu/cpu0/cache/index3/cache_disable_1
2047
due to the fact that the check was looking only at index bits [11:0]
and was ignoring writes to bits outside that range. The more correct
fix is to simply check whether the index is within the bounds of
[0..l3->indices].
While at it, cleanup comments and drop now-unused local macros.
Signed-off-by: Frank Arnold <frank.arnold@amd.com>
Link: http://lkml.kernel.org/r/1305553188-21061-3-git-send-email-bp@amd64.org
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
732eacc054 converted code around the
kernel using nested max() macros to use the new max3 macro but forgot to
remove the old line in intel_cacheinfo.c. Fix it.
Cc: Hagen Paul Pfeifer <hagen@jauu.net>
Cc: Frank Arnold <farnold@amd64.org>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Link: http://lkml.kernel.org/r/1305553188-21061-2-git-send-email-bp@amd64.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
If we have CONFIG_XEN and the other parameters to build an
Linux kernel that is non-privileged, the xen_[find|register|unregister]_
device_domain_owner functions should not be compiled. They should
use the nops defined in arch/x86/include/asm/xen/pci.h instead.
This fixes:
arch/x86/pci/xen.c:496: error: redefinition of ‘xen_find_device_domain_owner’
arch/x86/include/asm/xen/pci.h:25: note: previous definition of ‘xen_find_device_domain_owner’ was here
arch/x86/pci/xen.c:510: error: redefinition of ‘xen_register_device_domain_owner’
arch/x86/include/asm/xen/pci.h:29: note: previous definition of ‘xen_register_device_domain_owner’ was here
arch/x86/pci/xen.c:532: error: redefinition of ‘xen_unregister_device_domain_owner’
arch/x86/include/asm/xen/pci.h:34: note: previous definition of ‘xen_unregister_device_domain_owner’ was here
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
This patch fixes a bug reported by a customer, who found
that many unreasonable error interrupts reported on all
non-boot CPUs (APs) during the system boot stage.
According to Chapter 10 of Intel Software Developer Manual
Volume 3A, Local APIC may signal an illegal vector error when
an LVT entry is set as an illegal vector value (0~15) under
FIXED delivery mode (bits 8-11 is 0), regardless of whether
the mask bit is set or an interrupt actually happen. These
errors are seen as error interrupts.
The initial value of thermal LVT entries on all APs always reads
0x10000 because APs are woken up by BSP issuing INIT-SIPI-SIPI
sequence to them and LVT registers are reset to 0s except for
the mask bits which are set to 1s when APs receive INIT IPI.
When the BIOS takes over the thermal throttling interrupt,
the LVT thermal deliver mode should be SMI and it is required
from the kernel to keep AP's LVT thermal monitoring register
programmed as such as well.
This issue happens when BIOS does not take over thermal throttling
interrupt, AP's LVT thermal monitor register will be restored to
0x10000 which means vector 0 and fixed deliver mode, so all APs will
signal illegal vector error interrupts.
This patch check if interrupt delivery mode is not fixed mode before
restoring AP's LVT thermal monitor register.
Signed-off-by: Youquan Song <youquan.song@intel.com>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Acked-by: Yong Wang <yong.y.wang@intel.com>
Cc: hpa@linux.intel.com
Cc: joe@perches.com
Cc: jbaron@redhat.com
Cc: trenn@suse.de
Cc: kent.liu@intel.com
Cc: chaohong.guo@intel.com
Cc: <stable@kernel.org> # As far back as possible
Link: http://lkml.kernel.org/r/1303402963-17738-1-git-send-email-youquan.song@intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Loading fpu without aesni-intel does nothing. Loading aesni-intel
without fpu causes modes like xts to fail. (Unloading
aesni-intel will restore those modes.)
One solution would be to make aesni-intel depend on fpu, but it
seems cleaner to just combine the modules.
This is probably responsible for bugs like:
https://bugzilla.redhat.com/show_bug.cgi?id=589390
Signed-off-by: Andy Lutomirski <luto@mit.edu>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Conflicts:
arch/ia64/kernel/cyclone.c
arch/mips/kernel/i8253.c
arch/x86/kernel/i8253.c
Reason: Resolve conflicts so further cleanups do not conflict further
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Convert x86 i8253 clocksource code to use generic i8253 clocksource.
Acked-by: John Stultz <john.stultz@linaro.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
On some arches (x86, sh, arm, unicore, powerpc) the oops message would
print out the last sysfs file accessed.
This was very useful in finding a number of sysfs and driver core bugs
in the 2.5 and early 2.6 development days, but it has been a number of
years since this file has actually helped in debugging anything that
couldn't also be trivially determined from the stack traceback.
So it's time to delete the line. This is good as we need all the space
we can get for oops messages at times on consoles.
Acked-by: Phil Carmody <ext-phil.2.carmody@nokia.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
b may be added to a list, but is not removed before being freed
in the case of an error. This is done in the corresponding
deallocation function, so the code here has been changed to
follow that.
The sematic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression E,E1,E2;
identifier l;
@@
*list_add(&E->l,E1);
... when != E1
when != list_del(&E->l)
when != list_del_init(&E->l)
when != E = E2
*kfree(E);// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: <stable@kernel.org>
Link: http://lkml.kernel.org/r/1305294731-12127-1-git-send-email-julia@diku.dk
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This is a fix for the SGI Altix-UV Broadcast Assist Unit code,
which is used for TLB flushing.
Certain hardware configurations (that customers are ordering)
cause nasids (numa address space id's) to be non-consecutive.
Specifically, once you have more than 4 blades in a IRU
(Individual Rack Unit - or 1/2 rack) but less than the maximum
of 16, the nasid numbering becomes non-consecutive. This
currently results in a 'catastrophic error' (CATERR) detected by
the firmware during OS boot. The BAU is generating an 'INTD'
request that is targeting a non-existent nasid value. Such
configurations may also occur when a blade is configured off
because of hardware errors. (There is one UV hub per blade.)
This patch is required to support such configurations.
The problem with the tlb_uv.c code is that is using the
consecutive hub numbers as indices to the BAU distribution bit
map. These are simply the ordinal position of the hub or blade
within its partition. It should be using physical node numbers
(pnodes), which correspond to the physical nasid values. Use of
the hub number only works as long as the nasids in the partition
are consecutive and increase with a stride of 1.
This patch changes the index to be the pnode number, thus
allowing nasids to be non-consecutive.
It also provides a table in local memory for each cpu to
translate target cpu number to target pnode and nasid.
And it improves naming to properly reflect 'node' and 'uvhub'
versus 'nasid'.
Signed-off-by: Cliff Wickman <cpw@sgi.com>
Cc: <stable@kernel.org>
Link: http://lkml.kernel.org/r/E1QJmxX-0002Mz-Fk@eag09.americas.sgi.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
.. when applicable. We need to track in the p2m_mfn and
p2m_mfn_p the MFNs and pointers, respectivly, for the P2M entries
that are allocated for the identity mappings. Without this,
a PV domain with an E820 that triggers the 1-1 mapping to kick in,
won't be able to be restored as the P2M won't have the identity
mappings.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
git commit 24bdb0b62c (xen: do not create
the extra e820 region at an addr lower than 4G) does not take into
account that ifdef CONFIG_X86_32 instead of e820_end_of_low_ram_pfn()
find_low_pfn_range() is called (both calls are from arch/x86/kernel/setup.c).
find_low_pfn_range() behaves correctly and does not require change in
xen_extra_mem_start initialization. Additionally, if xen_extra_mem_start
is initialized in the same way as ifdef CONFIG_X86_64 then memory hotplug
support for Xen balloon driver (under development) is broken.
Signed-off-by: Daniel Kiper <dkiper@net-space.pl>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
When we parse the raw E820, the Xen hypervisor can set "E820_RAM"
to "E820_UNUSABLE" if the mem=X argument is used. As such we
should _not_ consider the E820_UNUSABLE as an 1-1 identity
mapping, but instead use the same case as for E820_RAM.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
With CONFIG_DEBUG_SECTION_MISMATCH=y I see these warnings in next-20110415:
LD vmlinux.o
MODPOST vmlinux.o
WARNING: vmlinux.o(.text+0x1ba48): Section mismatch in reference from the function native_pagetable_reserve() to the function .init.text:memblock_x86_reserve_range()
The function native_pagetable_reserve() references
the function __init memblock_x86_reserve_range().
This is often because native_pagetable_reserve lacks a __init
annotation or the annotation of memblock_x86_reserve_range is wrong.
This patch fixes the issue.
Thanks to pipacs from PaX project for help on IRC.
Acked-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Introduce a new x86_init hook called pagetable_reserve that at the end
of init_memory_mapping is used to reserve a range of memory addresses for
the kernel pagetable pages we used and free the other ones.
On native it just calls memblock_x86_reserve_range while on xen it also
takes care of setting the spare memory previously allocated
for kernel pagetable pages from RO to RW, so that it can be used for
other purposes.
A detailed explanation of the reason why this hook is needed follows.
As a consequence of the commit:
commit 4b239f458c
Author: Yinghai Lu <yinghai@kernel.org>
Date: Fri Dec 17 16:58:28 2010 -0800
x86-64, mm: Put early page table high
at some point init_memory_mapping is going to reach the pagetable pages
area and map those pages too (mapping them as normal memory that falls
in the range of addresses passed to init_memory_mapping as argument).
Some of those pages are already pagetable pages (they are in the range
pgt_buf_start-pgt_buf_end) therefore they are going to be mapped RO and
everything is fine.
Some of these pages are not pagetable pages yet (they fall in the range
pgt_buf_end-pgt_buf_top; for example the page at pgt_buf_end) so they
are going to be mapped RW. When these pages become pagetable pages and
are hooked into the pagetable, xen will find that the guest has already
a RW mapping of them somewhere and fail the operation.
The reason Xen requires pagetables to be RO is that the hypervisor needs
to verify that the pagetables are valid before using them. The validation
operations are called "pinning" (more details in arch/x86/xen/mmu.c).
In order to fix the issue we mark all the pages in the entire range
pgt_buf_start-pgt_buf_top as RO, however when the pagetable allocation
is completed only the range pgt_buf_start-pgt_buf_end is reserved by
init_memory_mapping. Hence the kernel is going to crash as soon as one
of the pages in the range pgt_buf_end-pgt_buf_top is reused (b/c those
ranges are RO).
For this reason we need a hook to reserve the kernel pagetable pages we
used and free the other ones so that they can be reused for other
purposes.
On native it just means calling memblock_x86_reserve_range, on Xen it
also means marking RW the pagetable pages that we allocated before but
that haven't been used before.
Another way to fix this is without using the hook is by adding a 'if
(xen_pv_domain)' in the 'init_memory_mapping' code and calling the Xen
counterpart, but that is just nasty.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Both warning and warning_symbol are nowhere used.
Let's get rid of them.
Signed-off-by: Richard Weinberger <richard@nod.at>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Soeren Sandmann Pedersen <ssp@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: x86 <x86@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Link: http://lkml.kernel.org/r/1305205872-10321-2-git-send-email-richard@nod.at
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Since suspend, resume and shutdown operations in struct sysdev_class
and struct sysdev_driver are not used any more, remove them. Also
drop sysdev_suspend(), sysdev_resume() and sysdev_shutdown() used
for executing those operations and modify all of their users
accordingly. This reduces kernel code size quite a bit and reduces
its complexity.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Since segments need to be handled slightly differently when fetching
instructions, we add a __linearize helper that accepts a new 'fetch' boolean.
[avi: fix oops caused by wrong segmented_address initialization order]
Signed-off-by: Nelson Elhage <nelhage@ksplice.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The last_guest_tsc is used in vcpu_load to adjust the
tsc_offset since tsc-scaling is merged. So the
last_guest_tsc needs to be updated in vcpu_put instead of
the the last_host_tsc. This is fixed with this patch.
Reported-by: Jan Kiszka <jan.kiszka@web.de>
Tested-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch fixes a bug in the nested-svm path when
decode-assists is available on the machine. After a
selective-cr0 intercept is detected the rip is advanced
unconditionally. This causes the l1-guest to continue
running with an l2-rip.
This bug was with the sel_cr0 unit-test on decode-assists
capable hardware.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Currently, setting a large (i.e. negative) base address for %cs does not work on
a 64-bit host. The "JOS" teaching operating system, used by MIT and other
universities, relies on such segments while bootstrapping its way to full
virtual memory management.
Signed-off-by: Nelson Elhage <nelhage@ksplice.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Just remove useless function define kvm_inject_pit_timer_irqs() from
file arch/x86/kvm/i8254.h
Signed-off-by:Duan Jiong<djduanjiong@gmail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Just remove useless function define kvm_pic_clear_isr_ack() and
pit_has_pending_timer()
Signed-off-by: Duan Jiong<djduanjiong@gmail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
When doing a soft int, we need to bump eip before pushing it to
the stack. Otherwise we'll do the int a second time.
[apw@canonical.com: merged eip update as per Jan's recommendation.]
Signed-off-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
em_push() is a simple wrapper of emulate_push(). So this patch replaces
emulate_push() with em_push() and removes the unnecessary former.
In addition, the unused ops arguments are removed from emulate_pusha()
and emulate_grp45().
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Avi Kivity <avi@redhat.com>
PUSH emulation stores the value by calling writeback() after setting
the dst operand appropriately in emulate_push().
This writeback() using dst is not needed at all because we know the
target is the stack. So this patch makes emulate_push() call, newly
introduced, segmented_write() directly.
By this, many inlined writeback()'s are removed.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Avi Kivity <avi@redhat.com>
This stops "CMP r/m, reg" to write back the data into memory.
Pointed out by Avi.
The writeback suppression now covers CMP, CMPS, SCAS.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Avi Kivity <avi@redhat.com>
In case certain allocations fail, vmx_create_vcpu may return 0 as error
instead of a negative value encoded via ERR_PTR. This causes a NULL
pointer dereferencing later on in kvm_vm_ioctl_vcpu_create.
Reported-by: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Currently we sync registers back and forth before/after exiting
to userspace for IO, but during IO device model shouldn't need to
read/write the registers, so we can as well skip those sync points. The
only exaception is broken vmware backdor interface. The new code sync
registers content during IO only if registers are read from/written to
by userspace in the middle of the IO operation and this almost never
happens in practise.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
When the emulation of vmload or vmsave fails because the
guest passed an unsupported physical address it gets an #GP
with rip pointing to the instruction after vmsave/vmload.
This is a bug and fixed by this patch.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch implements two new vm-ioctls to get and set the
virtual_tsc_khz if the machine supports tsc-scaling. Setting
the tsc-frequency is only possible before userspace creates
any vcpu.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
With TSC scaling in SVM the tsc-offset needs to be
calculated differently. This patch propagates this
calculation into the architecture specific modules so that
this complexity can be handled there.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch implements a call-back into the architecture code
to allow the propagation of changes to the virtual tsc_khz
of the vcpu.
On SVM it updates the tsc_ratio variable, on VMX it does
nothing.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The calculation of the tsc_delta value to ensure a
forward-going tsc for the guest is a function of the
host-tsc. This works as long as the guests tsc_khz is equal
to the hosts tsc_khz. With tsc-scaling hardware support this
is not longer true and the tsc_delta needs to be calculated
using guest_tsc values.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch changes the kvm_guest_time_update function to use
TSC frequency the guest actually has for updating its clock.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch enhances the kvm_amd module with functions to
support the TSC_RATE_MSR which can be used to set a given
tsc frequency for the guest vcpu.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
VMMCALL needs the VendorSpecific tag so that #UD emulation
(called if a guest running on AMD was migrated to an Intel host)
is allowed to process the instruction.
Signed-off-by: Avi Kivity <avi@redhat.com>
The mmu_seq verification can be removed since we get the pfn in the
protection of mmu_lock.
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The patch below removes unsigned long base_addresss; in i8254.h
since it is unused.
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch removes all the old code which handled the nested
selective cr0 write intercepts. This code was only in place
as a work-around until the instruction emulator is capable
of doing the same. This is the case with this patch-set and
so the code can be removed.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch adds code to check for IOIO intercepts on
instructions decoded by the KVM instruction emulator.
[avi: fix build error due to missing #define D2bvIP]
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch add intercept checks for emulated one-byte
instructions to the KVM instruction emulation path.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch adds intercepts checks for the remaining twobyte
instructions to the KVM instruction emulator.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch implements the emulator intercept checks for the
RDTSCP, MONITOR, and MWAIT instructions.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch adds the necessary code changes in the
instruction emulator and the extensions to svm.c to
implement intercept checks for the svm instructions.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch add intercept checks into the KVM instruction
emulator to check for the 8 instructions that access the
descriptor table addresses.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch adds the intercept checks for instruction
accessing the debug registers.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch adds all necessary intercept checks for
instructions that access the crX registers.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch adds a callback into kvm_x86_ops so that svm and
vmx code can do intercept checks on emulated instructions.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch adds a flag for the opcoded to tag instruction
which are only recognized in protected mode. The necessary
check is added too.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch adds a check_perm callback for each opcode into
the instruction emulator. This will be used to do all
necessary permission checks on instructions before checking
whether they are intercepted or not.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch prevents the changed CPU state to be written back
when the emulator detected that the instruction was
intercepted by the guest.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Add intercept codes for instructions defined by SVM as
interceptable.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
When running in guest mode, certain instructions can be intercepted by
hardware. This also holds for nested guests running on emulated
virtualization hardware, in particular instructions emulated by kvm
itself.
This patch adds a framework for intercepting instructions. If an
instruction is marked for interception, and if we're running in guest
mode, a callback is called to check whether an intercept is needed or
not. The callback is called at three points in time: immediately after
beginning execution, after checking privilge exceptions, and after
checking memory exception. This suits the different interception points
defined for different instructions and for the various virtualization
instruction sets.
In addition, a new X86EMUL_INTERCEPT is defined, which any callback or
memory access may define, allowing the more complicated intercepts to be
implemented in existing callbacks.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Most SIMD instructions use the 66/f2/f3 prefixes to distinguish between
different variants of the same instruction. Usually the encoding is quite
regular, but in some cases (including non-SIMD instructions) the prefixes
generate very different instructions. Examples include XCHG/PAUSE,
MOVQ/MOVDQA/MOVDQU, and MOVBE/CRC32.
Allow the emulator to handle these special cases by splitting such opcodes
into groups, with different decode flags and execution functions for different
prefixes.
Signed-off-by: Avi Kivity <avi@redhat.com>
Currently we store a rep prefix as 1 or 2 depending on whether it is a REPE or
REPNE. Since sse instructions depend on the prefix value, store it as the
original opcode to simplify things further on.
Signed-off-by: Avi Kivity <avi@redhat.com>
Since sse instructions can issue 16-byte mmios, we need to support them. We
can't increase the kvm_run mmio buffer size to 16 bytes without breaking
compatibility, so instead we break the large mmios into two smaller 8-byte
ones. Since the bus is 64-bit we aren't breaking any atomicity guarantees.
Signed-off-by: Avi Kivity <avi@redhat.com>
As Avi recently mentioned, the new standard mechanism for exposing features
is KVM_GET_SUPPORTED_CPUID, not spamming CAPs. For some reason async pf
missed that.
So expose async_pf here.
Signed-off-by: Glauber Costa <glommer@redhat.com>
CC: Gleb Natapov <gleb@redhat.com>
CC: Avi Kivity <avi@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Use vmx_set_nmi_mask() instead of open-coding management of
the hardware bit and the software hint (nmi_known_unmasked).
There's a slight change of behaviour when running without
hardware virtual NMI support - we now clear the NMI mask if
NMI delivery faulted in that case as well. This improves
emulation accuracy.
Signed-off-by: Avi Kivity <avi@redhat.com>
When we haven't injected an interrupt, we don't need to recover
the nmi blocking state (since the guest can't set it by itself).
This allows us to avoid a VMREAD later on.
Signed-off-by: Avi Kivity <avi@redhat.com>
We may read the cpl quite often in the same vmexit (instruction privilege
check, memory access checks for instruction and operands), so we gain
a bit if we cache the value.
Signed-off-by: Avi Kivity <avi@redhat.com>
In long mode, vm86 mode is disallowed, so we need not check for
it. Reading rflags.vm may require a VMREAD, so it is expensive.
Signed-off-by: Avi Kivity <avi@redhat.com>
Some rflags bits are owned by the host, not guest, so we need to use
kvm_get_rflags() to strip those bits away or kvm_set_rflags() to add them
back.
Signed-off-by: Avi Kivity <avi@redhat.com>
Disable irqs during optimized callback, so we dont miss any in-irq kprobes.
The following commands:
# cd /debug/tracing/
# echo "p mutex_unlock" >> kprobe_events
# echo "p _raw_spin_lock" >> kprobe_events
# echo "p smp_apic_timer_interrupt" >> ./kprobe_events
# echo 1 > events/enable
Cause the optimized kprobes to be missed. None is missed
with the fix applied.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Link: http://lkml.kernel.org/r/20110511110613.GB2390@jolsa.brq.redhat.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch adds the LPC Controller DeviceIDs for the Intel Panther Point PCH.
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
This workaround holds a dma32 buffer at early boot to prevent later
bootmem allocations from stealing it in the case of large RAM configs.
Now that x86 is using memblock, and the nobootmem wrapper does top-down
allocation, it's no longer necessary, so remove it.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Request_region should be used with release_region, not release_resource.
The local variables region and region2 are dropped and the calls to
release_resource are replaced with calls to release_region, using the first
two arguments of the corresponding calls to request_region.
The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression x,E;
@@
(
*x = request_region(...)
|
*x = request_mem_region(...)
)
... when != release_region(x)
when != x = E
* release_resource(x);
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
This file only contains code relevant for the northbridge
gart in AMD processors. This patch renames the file to
represent this fact in the filename.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Move the interupt handling for the iommu into the interupt
thread to reduce latencies and prepare interupt handling for
pri handling.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This fixes problems seen on UV systems handling NMIs from the
node controller.
I isolated the "dazed..." messages that I saw earlier to a bug in
the BMC on our platform. It was sending NMIs w/o properly setting
a register that indicated the source of NMI.
So rather than _assuming_ any unhandled NMI came from the UV system
maintenance console (SMC), add a check to verify that the SMC actually
sent the NMI.
Signed-off-by: Jack Steiner <steiner@sgi.com>
Cc: gorcunov@gmail.com
Cc: dzickus@redhat.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
It's possible for init_memory_mapping() to fail to map the entire region
if it crosses a boundary, so ensure that we complete the mapping.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Link: http://lkml.kernel.org/r/1304623186-18261-5-git-send-email-mjg@redhat.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Experimentation with various EFI implementations has shown that functions
outside runtime services will still update their pointers if
SetVirtualAddressMap() is called with memory descriptors outside the
runtime area. This is obviously insane, and therefore is unsurprising.
Evidence from instrumenting another EFI implementation suggests that it
only passes the set of descriptors covering runtime regions, so let's
avoid any problems by doing the same. Runtime descriptors are copied to
a separate memory map, and only that map is passed back to the firmware.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Link: http://lkml.kernel.org/r/1304623186-18261-4-git-send-email-mjg@redhat.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Some firmware implementations assume that physically contiguous regions
will be contiguous in virtual address space. This assumption is, obviously,
entirely unjustifiable. Said firmware implementations lack the good grace
to handle their failings in a measured and reasonable manner, instead
tending to shit all over address space and oopsing the kernel.
In an ideal universe these firmware implementations would simultaneously
catch fire and cease to be a problem, but since some of them are present
in attractively thin and shiny metal devices vanity wins out and some
poor developer spends an extended period of time surrounded by a
growing array of empty bottles until the underlying reason becomes
apparent. Said developer presents this patch, which simply merges
adjacent regions if they happen to be contiguous and have the same EFI
memory type and caching attributes.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Link: http://lkml.kernel.org/r/1304623186-18261-3-git-send-email-mjg@redhat.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
The core EFI code and 64-bit EFI code currently have independent
implementations of code for setting memory regions as executable or not.
Let's consolidate them.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Link: http://lkml.kernel.org/r/1304623186-18261-2-git-send-email-mjg@redhat.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
The spec says that SetVirtualAddressMap doesn't work once you're in
virtual mode, so there's no point in having infrastructure for calling
it from there.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Link: http://lkml.kernel.org/r/1304623186-18261-1-git-send-email-mjg@redhat.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Fix these Sparse complaints:
CHECK arch/x86/platform/mrst/mrst.c
arch/x86/platform/mrst/mrst.c:197:13: warning: symbol 'mrst_time_init' was not declared. Should it be static?
arch/x86/platform/mrst/mrst.c:219:16: warning: symbol 'mrst_arch_setup' was not declared. Should it be static?
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Roman Gezikov <roman.gezikov@atheros.com>
Cc: Joonas Viskari <joonas.viskari@atheros.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Allen Kao <allen.kao@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Link: http://lkml.kernel.org/r/1304719209-26913-1-git-send-email-lrodriguez@atheros.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
- Documentation/kvm/ to Documentation/virtual/kvm
- Documentation/uml/ to Documentation/virtual/uml
- Documentation/lguest/ to Documentation/virtual/lguest
throughout the kernel source tree.
Signed-off-by: Rob Landley <rob@landley.net>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
The Intel Nehalem offcore bits implemented in:
e994d7d23a: perf: Fix LLC-* events on Intel Nehalem/Westmere
... are wrong: they implemented _ACCESS as _HIT and counted OTHER_CORE_HIT* as
MISS even though its clearly documented as an L3 hit ...
Fix them and the Westmere definitions as well.
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1299119690-13991-3-git-send-email-ming.m.lin@intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
