Norbert reported that it's possible to race sys_perf_event_open() such
that the looser ends up in another context from the group leader,
triggering many WARNs.
The move_group case checks for races against itself, but the
!move_group case doesn't, seemingly relying on the previous
group_leader->ctx == ctx check. However, that check is racy due to not
holding any locks at that time.
Therefore, re-check the result after acquiring locks and bailing
if they no longer match.
Additionally, clarify the not_move_group case from the
move_group-vs-move_group race.
Fixes: f63a8daa58 ("perf: Fix event->ctx locking")
Reported-by: Norbert Slusarek <nslusarek@gmx.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* arm64/for-next/perf:
perf/arm-cmn: Decode CAL devices properly in debugfs
perf/arm-cmn: Fix filter_sel lookup
perf/marvell_cn10k: Fix tad_pmu_event_init() to check pmu type first
drivers/perf: hisi: Add Support for CPA PMU
drivers/perf: hisi: Associate PMUs in SICL with CPUs online
drivers/perf: arm_spe: Expose saturating counter to 16-bit
perf/arm-cmn: Add CMN-700 support
perf/arm-cmn: Refactor occupancy filter selector
perf/arm-cmn: Add CMN-650 support
dt-bindings: perf: arm-cmn: Add CMN-650 and CMN-700
perf: check return value of armpmu_request_irq()
perf: RISC-V: Remove non-kernel-doc ** comments
* for-next/sme: (30 commits)
: Scalable Matrix Extensions support.
arm64/sve: Move sve_free() into SVE code section
arm64/sve: Make kernel FPU protection RT friendly
arm64/sve: Delay freeing memory in fpsimd_flush_thread()
arm64/sme: More sensibly define the size for the ZA register set
arm64/sme: Fix NULL check after kzalloc
arm64/sme: Add ID_AA64SMFR0_EL1 to __read_sysreg_by_encoding()
arm64/sme: Provide Kconfig for SME
KVM: arm64: Handle SME host state when running guests
KVM: arm64: Trap SME usage in guest
KVM: arm64: Hide SME system registers from guests
arm64/sme: Save and restore streaming mode over EFI runtime calls
arm64/sme: Disable streaming mode and ZA when flushing CPU state
arm64/sme: Add ptrace support for ZA
arm64/sme: Implement ptrace support for streaming mode SVE registers
arm64/sme: Implement ZA signal handling
arm64/sme: Implement streaming SVE signal handling
arm64/sme: Disable ZA and streaming mode when handling signals
arm64/sme: Implement traps and syscall handling for SME
arm64/sme: Implement ZA context switching
arm64/sme: Implement streaming SVE context switching
...
* for-next/stacktrace:
: Stacktrace cleanups.
arm64: stacktrace: align with common naming
arm64: stacktrace: rename stackframe to unwind_state
arm64: stacktrace: rename unwinder functions
arm64: stacktrace: make struct stackframe private to stacktrace.c
arm64: stacktrace: delete PCS comment
arm64: stacktrace: remove NULL task check from unwind_frame()
* for-next/fault-in-subpage:
: btrfs search_ioctl() live-lock fix using fault_in_subpage_writeable().
btrfs: Avoid live-lock in search_ioctl() on hardware with sub-page faults
arm64: Add support for user sub-page fault probing
mm: Add fault_in_subpage_writeable() to probe at sub-page granularity
* for-next/misc:
: Miscellaneous patches.
arm64: Kconfig.platforms: Add comments
arm64: Kconfig: Fix indentation and add comments
arm64: mm: avoid writable executable mappings in kexec/hibernate code
arm64: lds: move special code sections out of kernel exec segment
arm64/hugetlb: Implement arm64 specific huge_ptep_get()
arm64/hugetlb: Use ptep_get() to get the pte value of a huge page
arm64: mm: Make arch_faults_on_old_pte() check for migratability
arm64: mte: Clean up user tag accessors
arm64/hugetlb: Drop TLB flush from get_clear_flush()
arm64: Declare non global symbols as static
arm64: mm: Cleanup useless parameters in zone_sizes_init()
arm64: fix types in copy_highpage()
arm64: Set ARCH_NR_GPIO to 2048 for ARCH_APPLE
arm64: cputype: Avoid overflow using MIDR_IMPLEMENTOR_MASK
arm64: document the boot requirements for MTE
arm64/mm: Compute PTRS_PER_[PMD|PUD] independently of PTRS_PER_PTE
* for-next/ftrace:
: ftrace cleanups.
arm64/ftrace: Make function graph use ftrace directly
ftrace: cleanup ftrace_graph_caller enable and disable
* for-next/crashkernel:
: Support for crashkernel reservations above ZONE_DMA.
arm64: kdump: Do not allocate crash low memory if not needed
docs: kdump: Update the crashkernel description for arm64
of: Support more than one crash kernel regions for kexec -s
of: fdt: Add memory for devices by DT property "linux,usable-memory-range"
arm64: kdump: Reimplement crashkernel=X
arm64: Use insert_resource() to simplify code
kdump: return -ENOENT if required cmdline option does not exist
- Add new infrastructure to stop gpiolib from rewriting irq_chip
structures behind our back. Convert a few of them, but this will
obviously be a long effort.
- A bunch of GICv3 improvements, such as using MMIO-based invalidations
when possible, and reducing the amount of polling we perform when
reconfiguring interrupts.
- Another set of GICv3 improvements for the Pseudo-NMI functionality,
with a nice cleanup making it easy to reason about the various
states we can be in when an NMI fires.
- The usual bunch of misc fixes and minor improvements.
-----BEGIN PGP SIGNATURE-----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=nQxd
-----END PGP SIGNATURE-----
Merge tag 'irqchip-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core
Pull irqchip updates from Marc Zyngier:
- Add new infrastructure to stop gpiolib from rewriting irq_chip
structures behind our back. Convert a few of them, but this will
obviously be a long effort.
- A bunch of GICv3 improvements, such as using MMIO-based invalidations
when possible, and reducing the amount of polling we perform when
reconfiguring interrupts.
- Another set of GICv3 improvements for the Pseudo-NMI functionality,
with a nice cleanup making it easy to reason about the various
states we can be in when an NMI fires.
- The usual bunch of misc fixes and minor improvements.
Link: https://lore.kernel.org/all/20220519165308.998315-1-maz@kernel.org
Remove the superfluous judgment since the function is
never called for a root cgroup, as suggested by Tejun.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Shida Zhang <zhangshida@kylinos.cn>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Because GCC-12 is fully stupid about array bounds and it's just really
hard to get a solid array definition from a linker script, flip the
array order to avoid needing negative offsets :-/
This makes the whole relational pointer magic a little less obvious, but
alas.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/YoOLLmLG7HRTXeEm@hirez.programming.kicks-ass.net
Use try_cmpxchg64 instead of cmpxchg64 (*ptr, old, new) != old in
sched_clock_{local,remote}. x86 cmpxchg returns success in ZF flag,
so this change saves a compare after cmpxchg (and related move
instruction in front of cmpxchg).
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220518184953.3446778-1-ubizjak@gmail.com
The most callers of khugepaged_enter() don't care about the return value.
Only dup_mmap(), anonymous THP page fault and MADV_HUGEPAGE handle the
error by returning -ENOMEM. Actually it is not harmful for them to ignore
the error case either. It also sounds overkilling to fail fork() and page
fault early due to khugepaged_enter() error, and MADV_HUGEPAGE does set
VM_HUGEPAGE flag regardless of the error.
Link: https://lkml.kernel.org/r/20220510203222.24246-6-shy828301@gmail.com
Signed-off-by: Yang Shi <shy828301@gmail.com>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Vlastmil Babka <vbabka@suse.cz>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When CONFIG_KEXEC_FILE is set for riscv platform, the compilation of
kernel/kexec_file.c generate build error:
kernel/kexec_file.c: In function 'crash_prepare_elf64_headers':
./arch/riscv/include/asm/page.h:110:71: error: request for member 'virt_addr' in something not a structure or union
110 | ((x) >= PAGE_OFFSET && (!IS_ENABLED(CONFIG_64BIT) || (x) < kernel_map.virt_addr))
| ^
./arch/riscv/include/asm/page.h:131:2: note: in expansion of macro 'is_linear_mapping'
131 | is_linear_mapping(_x) ? \
| ^~~~~~~~~~~~~~~~~
./arch/riscv/include/asm/page.h:140:31: note: in expansion of macro '__va_to_pa_nodebug'
140 | #define __phys_addr_symbol(x) __va_to_pa_nodebug(x)
| ^~~~~~~~~~~~~~~~~~
./arch/riscv/include/asm/page.h:143:24: note: in expansion of macro '__phys_addr_symbol'
143 | #define __pa_symbol(x) __phys_addr_symbol(RELOC_HIDE((unsigned long)(x), 0))
| ^~~~~~~~~~~~~~~~~~
kernel/kexec_file.c:1327:36: note: in expansion of macro '__pa_symbol'
1327 | phdr->p_offset = phdr->p_paddr = __pa_symbol(_text);
This occurs is because the "kernel_map" referenced in macro
is_linear_mapping() is suppose to be the one of struct kernel_mapping
defined in arch/riscv/mm/init.c, but the 2nd argument of
crash_prepare_elf64_header() has same symbol name, in expansion of macro
is_linear_mapping in function crash_prepare_elf64_header(), "kernel_map"
actually is the local variable.
Signed-off-by: Liao Chang <liaochang1@huawei.com>
Link: https://lore.kernel.org/r/20220408100914.150110-2-lizhengyu3@huawei.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Add devm_register_restart_handler() helper that registers sys-off
handler using restart mode and with a default priority. Most drivers
will want to register restart handler with a default priority, so this
helper will reduce the boilerplate code and make code easier to read and
follow.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add devm_register_power_off_handler() helper that registers sys-off
handler using power-off mode and with a default priority. Most drivers
will want to register power-off handler with a default priority, so this
helper will reduce the boilerplate code and make code easier to read and
follow.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
All pm_power_off_prepare() users were converted to sys-off handler API.
Remove the obsolete global callback variable.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add platform-level registration helpers that will ease transition of the
arch/platform power-off callbacks to the new sys-off based API, allowing
us to remove the global pm_power_off variable in the future.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add kernel_can_power_off() helper that replaces open-coded checks of
the global pm_power_off variable. This is a necessary step towards
supporting chained power-off handlers.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add weak stub for the global pm_power_off callback variable. This will
allow us to remove pm_power_off definitions from arch/ code and transition
to the new sys-off based API that will replace the global variable.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add do_kernel_power_off() helper that will remove open-coded pm_power_off
invocations from the architecture code. This is the first step on the way
to remove the global pm_power_off variable, which will allow us to
implement consistent power-off chaining support.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Wrap legacy power-off callbacks into sys-off handlers in order to
support co-existence of both legacy and new callbacks while we're
in process of upgrading legacy callbacks to the new API.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In order to support power-off chaining we need to get rid of the global
pm_* variables, replacing them with the new kernel API functions that
support chaining.
Introduce new generic sys-off handler API that brings the following
features:
1. Power-off and restart handlers are registered using same API function
that supports chaining, hence all power-off and restart modes will
support chaining using this unified function.
2. Prevents notifier priority collisions by disallowing registration of
multiple handlers at the non-default priority level.
3. Supports passing opaque user argument to callback, which allows us to
remove global variables from drivers.
This patch adds support of the following sys-off modes:
- SYS_OFF_MODE_POWER_OFF_PREPARE that replaces global pm_power_off_prepare
variable and provides chaining support for power-off-prepare handlers.
- SYS_OFF_MODE_POWER_OFF that replaces global pm_power_off variable and
provides chaining support for power-off handlers.
- SYS_OFF_MODE_RESTART that provides a better restart API, removing a need
from drivers to have a global scratch variable by utilizing the opaque
callback argument.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add variant of blocking/atomic_notifier_chain_register() functions that
allow registration of a notifier only if it has unique priority, otherwise
-EBUSY error code is returned by the new functions.
Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add atomic_notifier_call_chain_is_empty() that returns true if given
atomic call chain is empty.
The first user of this new notifier API function will be the kernel
power-off core code that will support power-off call chains. The core
code will need to check whether there is a power-off handler registered
at all in order to decide whether to halt machine or power it off.
Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Make cgroup_debug static since it's only used in cgroup.c
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
random32.c has two random number generators in it: one that is meant to
be used deterministically, with some predefined seed, and one that does
the same exact thing as random.c, except does it poorly. The first one
has some use cases. The second one no longer does and can be replaced
with calls to random.c's proper random number generator.
The relatively recent siphash-based bad random32.c code was added in
response to concerns that the prior random32.c was too deterministic.
Out of fears that random.c was (at the time) too slow, this code was
anonymously contributed. Then out of that emerged a kind of shadow
entropy gathering system, with its own tentacles throughout various net
code, added willy nilly.
Stop👏making👏bespoke👏random👏number👏generators👏.
Fortunately, recent advances in random.c mean that we can stop playing
with this sketchiness, and just use get_random_u32(), which is now fast
enough. In micro benchmarks using RDPMC, I'm seeing the same median
cycle count between the two functions, with the mean being _slightly_
higher due to batches refilling (which we can optimize further need be).
However, when doing *real* benchmarks of the net functions that actually
use these random numbers, the mean cycles actually *decreased* slightly
(with the median still staying the same), likely because the additional
prandom code means icache misses and complexity, whereas random.c is
generally already being used by something else nearby.
The biggest benefit of this is that there are many users of prandom who
probably should be using cryptographically secure random numbers. This
makes all of those accidental cases become secure by just flipping a
switch. Later on, we can do a tree-wide cleanup to remove the static
inline wrapper functions that this commit adds.
There are also some low-ish hanging fruits for making this even faster
in the future: a get_random_u16() function for use in the networking
stack will give a 2x performance boost there, using SIMD for ChaCha20
will let us compute 4 or 8 or 16 blocks of output in parallel, instead
of just one, giving us large buffers for cheap, and introducing a
get_random_*_bh() function that assumes irqs are already disabled will
shave off a few cycles for ordinary calls. These are things we can chip
away at down the road.
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Not calling the function for dummy contexts will cause the context to
not be reset. During the next syscall, this will cause an error in
__audit_syscall_entry:
WARN_ON(context->context != AUDIT_CTX_UNUSED);
WARN_ON(context->name_count);
if (context->context != AUDIT_CTX_UNUSED || context->name_count) {
audit_panic("unrecoverable error in audit_syscall_entry()");
return;
}
These problematic dummy contexts are created via the following call
chain:
exit_to_user_mode_prepare
-> arch_do_signal_or_restart
-> get_signal
-> task_work_run
-> tctx_task_work
-> io_req_task_submit
-> io_issue_sqe
-> audit_uring_entry
Cc: stable@vger.kernel.org
Fixes: 5bd2182d58 ("audit,io_uring,io-wq: add some basic audit support to io_uring")
Signed-off-by: Julian Orth <ju.orth@gmail.com>
[PM: subject line tweaks]
Signed-off-by: Paul Moore <paul@paul-moore.com>
swiotlb_find_slots() skips slots according to io tlb aligned mask
calculated from min aligned mask and original physical address
offset. This affects max mapping size. The mapping size can't
achieve the IO_TLB_SEGSIZE * IO_TLB_SIZE when original offset is
non-zero. This will cause system boot up failure in Hyper-V
Isolation VM where swiotlb force is enabled. Scsi layer use return
value of dma_max_mapping_size() to set max segment size and it
finally calls swiotlb_max_mapping_size(). Hyper-V storage driver
sets min align mask to 4k - 1. Scsi layer may pass 256k length of
request buffer with 0~4k offset and Hyper-V storage driver can't
get swiotlb bounce buffer via DMA API. Swiotlb_find_slots() can't
find 256k length bounce buffer with offset. Make swiotlb_max_mapping
_size() take min align mask into account.
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Use the newly added suite_{init,exit} support for suite-wide init and
cleanup. This avoids the unsupported method by which the test used to do
suite-wide init and cleanup (avoiding issues such as missing TAP
headers, and possible future conflicts).
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
in the middle of the arguments. This reordering broke BPF programs which
relied on the old argument list. While tracepoints are not considered
stable ABI, it's not trivial to make BPF cope with such a change, but it's
being worked on. For now restore the original argument order and move the
new argument to the end of the argument list.
-----BEGIN PGP SIGNATURE-----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=6Bvx
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2022-05-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Thomas Gleixner:
"The recent expansion of the sched switch tracepoint inserted a new
argument in the middle of the arguments. This reordering broke BPF
programs which relied on the old argument list.
While tracepoints are not considered stable ABI, it's not trivial to
make BPF cope with such a change, but it's being worked on. For now
restore the original argument order and move the new argument to the
end of the argument list"
* tag 'sched-urgent-2022-05-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/tracing: Append prev_state to tp args instead
interrupt code. The consolidation of the interrupt handler invocation code
added an unconditional warning when generic_handle_domain_irq() is invoked
from outside hard interrupt context. That's overbroad as the requirement
for invoking these handlers in hard interrupt context is only required for
certain interrupt types. The subsequently called code already contains a
warning which triggers conditionally for interrupt chips which indicate
this requirement in their properties. Remove the overbroad one.
-----BEGIN PGP SIGNATURE-----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=pJj8
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2022-05-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Thomas Gleixner:
"A single fix for a recent (introduced in 5.16) regression in the core
interrupt code.
The consolidation of the interrupt handler invocation code added an
unconditional warning when generic_handle_domain_irq() is invoked from
outside hard interrupt context. That's overbroad as the requirement
for invoking these handlers in hard interrupt context is only required
for certain interrupt types. The subsequently called code already
contains a warning which triggers conditionally for interrupt chips
which indicate this requirement in their properties.
Remove the overbroad one"
* tag 'irq-urgent-2022-05-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Remove WARN_ON_ONCE() in generic_handle_domain_irq()
The IRQ simulator uses irq_work to trigger an interrupt. Without the
IRQ_WORK_HARD_IRQ flag the irq_work will be performed in thread context
on PREEMPT_RT. This causes locking errors later in handle_simple_irq()
which expects to be invoked with disabled interrupts.
Triggering individual interrupts in hardirq context should not lead to
unexpected high latencies since this is also what the hardware
controller does. Also it is used as a simulator so...
Use IRQ_WORK_INIT_HARD() to carry out the irq_work in hardirq context on
PREEMPT_RT.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/YnuZBoEVMGwKkLm+@linutronix.de
With debugobjects enabled the timer hint for freeing of active timers
embedded inside delayed works is always the same, i.e. the hint is
delayed_work_timer_fn, even though the function the delayed work is going
to run can be wildly different depending on what work was queued. Enabling
workqueue debugobjects doesn't help either because the delayed work isn't
considered active until it is actually queued to run on a workqueue. If the
work is freed while the timer is pending the work isn't considered active
so there is no information from workqueue debugobjects.
Special case delayed works in the timer debugobjects hint logic so that the
delayed work function is returned instead of the delayed_work_timer_fn.
This will help to understand which delayed work was pending that got
freed.
Apply the same treatment for kthread_delayed_work because it follows the
same pattern.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20220511201951.42408-1-swboyd@chromium.org
Instead of having uninitialized versions of arguments as separate
bpf_arg_types (eg ARG_PTR_TO_UNINIT_MEM as the uninitialized version
of ARG_PTR_TO_MEM), we can instead use MEM_UNINIT as a bpf_type_flag
modifier to denote that the argument is uninitialized.
Doing so cleans up some of the logic in the verifier. We no longer
need to do two checks against an argument type (eg "if
(base_type(arg_type) == ARG_PTR_TO_MEM || base_type(arg_type) ==
ARG_PTR_TO_UNINIT_MEM)"), since uninitialized and initialized
versions of the same argument type will now share the same base type.
In the near future, MEM_UNINIT will be used by dynptr helper functions
as well.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20220509224257.3222614-2-joannelkoong@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The addition of random_get_entropy_fallback() provides access to
whichever time source has the highest frequency, which is useful for
gathering entropy on platforms without available cycle counters. It's
not necessarily as good as being able to quickly access a cycle counter
that the CPU has, but it's still something, even when it falls back to
being jiffies-based.
In the event that a given arch does not define get_cycles(), falling
back to the get_cycles() default implementation that returns 0 is really
not the best we can do. Instead, at least calling
random_get_entropy_fallback() would be preferable, because that always
needs to return _something_, even falling back to jiffies eventually.
It's not as though random_get_entropy_fallback() is super high precision
or guaranteed to be entropic, but basically anything that's not zero all
the time is better than returning zero all the time.
Finally, since random_get_entropy_fallback() is used during extremely
early boot when randomizing freelists in mm_init(), it can be called
before timekeeping has been initialized. In that case there really is
nothing we can do; jiffies hasn't even started ticking yet. So just give
up and return 0.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Theodore Ts'o <tytso@mit.edu>
An inclusion of cache.h in printk.h was added in 2014 in commit
c28aa1f0a8 ("printk/cache: mark printk_once test variable
__read_mostly") in order to bring in the definition of __read_mostly. The
usage of __read_mostly was later removed in commit 3ec25826ae ("printk:
Tie printk_once / printk_deferred_once into .data.once for reset") which
made the inclusion of cache.h unnecessary, so remove it.
We have a small amount of code that depended on the inclusion of cache.h
from printk.h; fix that code to include the appropriate header.
This fixes a circular inclusion on arm64 (linux/printk.h -> linux/cache.h
-> asm/cache.h -> linux/kasan-enabled.h -> linux/static_key.h ->
linux/jump_label.h -> linux/bug.h -> asm/bug.h -> linux/printk.h) that
would otherwise be introduced by the next patch.
Build tested using {allyesconfig,defconfig} x {arm64,x86_64}.
Link: https://linux-review.googlesource.com/id/I8fd51f72c9ef1f2d6afd3b2cbc875aa4792c1fba
Link: https://lkml.kernel.org/r/20220427195820.1716975-1-pcc@google.com
Signed-off-by: Peter Collingbourne <pcc@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The combination of jit blinding and pointers to bpf subprogs causes:
[ 36.989548] BUG: unable to handle page fault for address: 0000000100000001
[ 36.990342] #PF: supervisor instruction fetch in kernel mode
[ 36.990968] #PF: error_code(0x0010) - not-present page
[ 36.994859] RIP: 0010:0x100000001
[ 36.995209] Code: Unable to access opcode bytes at RIP 0xffffffd7.
[ 37.004091] Call Trace:
[ 37.004351] <TASK>
[ 37.004576] ? bpf_loop+0x4d/0x70
[ 37.004932] ? bpf_prog_3899083f75e4c5de_F+0xe3/0x13b
The jit blinding logic didn't recognize that ld_imm64 with an address
of bpf subprogram is a special instruction and proceeded to randomize it.
By itself it wouldn't have been an issue, but jit_subprogs() logic
relies on two step process to JIT all subprogs and then JIT them
again when addresses of all subprogs are known.
Blinding process in the first JIT phase caused second JIT to miss
adjustment of special ld_imm64.
Fix this issue by ignoring special ld_imm64 instructions that don't have
user controlled constants and shouldn't be blinded.
Fixes: 69c087ba62 ("bpf: Add bpf_for_each_map_elem() helper")
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220513011025.13344-1-alexei.starovoitov@gmail.com
nslabs can shrink when allocations or the remap don't succeed, so make
sure to use it for all sizing. For that remove the bytes value that
can get stale and replace it with local calculations and a boolean to
indicate if the originally requested size could not be allocated.
Fixes: 6424e31b1c ("swiotlb: remove swiotlb_init_with_tbl and swiotlb_init_late_with_tbl")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
default_nslabs should only be used to initialize nslabs, after that we
need to use the local variable that can shrink when allocations or the
remap don't succeed.
Fixes: 6424e31b1c ("swiotlb: remove swiotlb_init_with_tbl and swiotlb_init_late_with_tbl")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
For historical reasons the switlb code paniced when the metadata could
not be allocated, but just printed a warning when the actual main
swiotlb buffer could not be allocated. Restore this somewhat unexpected
behavior as changing it caused a boot failure on the Microchip RISC-V
PolarFire SoC Icicle kit.
Fixes: 6424e31b1c ("swiotlb: remove swiotlb_init_with_tbl and swiotlb_init_late_with_tbl")
Reported-by: Conor Dooley <Conor.Dooley@microchip.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Conor Dooley <Conor.Dooley@microchip.com>
Earlier the PREEMPT_RT patch had a PREEMPT_RT_FULL and PREEMPT_RT_BASE
Kconfig option. The latter was a subset of the functionality that was
enabled with PREEMPT_RT_FULL and was mainly useful for debugging.
During the merging efforts the two Kconfig options were abandoned in the
v5.4.3-rt1 release and since then there is only PREEMPT_RT which enables
the full features set (as PREEMPT_RT_FULL did in earlier releases).
Replace the PREEMPT_RT_FULL reference with PREEMPT_RT.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Link: https://lore.kernel.org/r/YnvWUvq1vpqCfCU7@linutronix.de
Pointer buf is being assigned a value that is not being read, buf is being
re-assigned in the next starement. The assignment is redundant and can be
removed.
Cleans up clang scan build warning:
kernel/relay.c:443:8: warning: Although the value stored to 'buf' is
used in the enclosing expression, the value is never actually read
from 'buf' [deadcode.DeadStores]
Link: https://lkml.kernel.org/r/20220508212152.58753-1-colin.i.king@gmail.com
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
At the end of get_last_crashkernel(), the judgement of ck_cmdline is
obviously unnecessary and causes redundance, let's clean it up.
Link: https://lkml.kernel.org/r/20220506104116.259323-1-sensor1010@163.com
Signed-off-by: lizhe <sensor1010@163.com>
Acked-by: Baoquan He <bhe@redhat.com>
Acked-by: Philipp Rudo <prudo@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull cgroup fix from Tejun Heo:
"Waiman's fix for a cgroup2 cpuset bug where it could miss nodes which
were hot-added"
* 'for-5.18-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup/cpuset: Remove cpus_allowed/mems_allowed setup in cpuset_init_smp()
Now check_exported_symbol() always succeeds.
Merge it into find_exported_symbol_in_search() to make the code concise.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Currently, !fsa->gplok && syms->license == GPL_ONLY) is checked after
bsearch() succeeds.
It is meaningless to do the binary search in the GPL symbol table when
fsa->gplok is false because we know find_exported_symbol_in_section()
will fail anyway.
This check should be done before bsearch().
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
There is no need to use an opaque pointer for check_exported_symbol()
or find_exported_symbol_in_section.
Pass (struct find_symbol_arg *) explicitly.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
The error log for inherit_taint() doesn't really help to find the
symbol which violates GPL rules.
For example,
if a module has 300 symbol and includes 50 disallowed symbols,
the log only shows the content below and we have no idea what symbol is.
AAA: module using GPL-only symbols uses symbols from proprietary module BBB.
It's hard for user who doesn't really know how the symbol was parsing.
This patch add symbol name to tell the offending symbols explicitly.
AAA: module using GPL-only symbols uses symbols SSS from proprietary module BBB.
Signed-off-by: Lecopzer Chen <lecopzer.chen@mediatek.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Currently, only the initial module that tainted the kernel is
recorded e.g. when an out-of-tree module is loaded.
The purpose of this patch is to allow the kernel to maintain a record of
each unloaded module that taints the kernel. So, in addition to
displaying a list of linked modules (see print_modules()) e.g. in the
event of a detected bad page, unloaded modules that carried a taint/or
taints are displayed too. A tainted module unload count is maintained.
The number of tracked modules is not fixed. This feature is disabled by
default.
Signed-off-by: Aaron Tomlin <atomlin@redhat.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
No functional change.
This patch migrates module_assert_mutex_or_preempt() to internal.h.
So, the aforementiond function can be used outside of main/or core
module code yet will remain restricted for internal use only.
Signed-off-by: Aaron Tomlin <atomlin@redhat.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
No functional change.
The purpose of this patch is to modify module_flags_taint() to accept
a module's taints bitmap as a parameter and modifies all users
accordingly. Furthermore, it is now possible to access a given
module's taint flags data outside of non-essential code yet does
remain for internal use only.
This is in preparation for module unload taint tracking support.
Signed-off-by: Aaron Tomlin <atomlin@redhat.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Hardware core level testing features require near simultaneous execution
of WRMSR instructions on all threads of a core to initiate a test.
Provide a customized cut down version of stop_machine_cpuslocked() that
just operates on the threads of a single core.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20220506225410.1652287-4-tony.luck@intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The cnt value in the 'cnt >= BPF_MAX_TRAMP_PROGS' check does not
include BPF_TRAMP_MODIFY_RETURN bpf programs, so the number of
the attached BPF_TRAMP_MODIFY_RETURN bpf programs in a trampoline
can exceed BPF_MAX_TRAMP_PROGS.
When this happens, the assignment '*progs++ = aux->prog' in
bpf_trampoline_get_progs() will cause progs array overflow as the
progs field in the bpf_tramp_progs struct can only hold at most
BPF_MAX_TRAMP_PROGS bpf programs.
Fixes: 88fd9e5352 ("bpf: Refactor trampoline update code")
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Link: https://lore.kernel.org/r/20220430130803.210624-1-ytcoode@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add new ebpf helpers bpf_map_lookup_percpu_elem.
The implementation method is relatively simple, refer to the implementation
method of map_lookup_elem of percpu map, increase the parameters of cpu, and
obtain it according to the specified cpu.
Signed-off-by: Feng Zhou <zhoufeng.zf@bytedance.com>
Link: https://lore.kernel.org/r/20220511093854.411-2-zhoufeng.zf@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Commit fa2c3254d7 (sched/tracing: Don't re-read p->state when emitting
sched_switch event, 2022-01-20) added a new prev_state argument to the
sched_switch tracepoint, before the prev task_struct pointer.
This reordering of arguments broke BPF programs that use the raw
tracepoint (e.g. tp_btf programs). The type of the second argument has
changed and existing programs that assume a task_struct* argument
(e.g. for bpf_task_storage access) will now fail to verify.
If we instead append the new argument to the end, all existing programs
would continue to work and can conditionally extract the prev_state
argument on supported kernel versions.
Fixes: fa2c3254d7 (sched/tracing: Don't re-read p->state when emitting sched_switch event, 2022-01-20)
Signed-off-by: Delyan Kratunov <delyank@fb.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lkml.kernel.org/r/c8a6930dfdd58a4a5755fc01732675472979732b.camel@fb.com
Currently ptrace_stop() / do_signal_stop() rely on the special states
TASK_TRACED and TASK_STOPPED resp. to keep unique state. That is, this
state exists only in task->__state and nowhere else.
There's two spots of bother with this:
- PREEMPT_RT has task->saved_state which complicates matters,
meaning task_is_{traced,stopped}() needs to check an additional
variable.
- An alternative freezer implementation that itself relies on a
special TASK state would loose TASK_TRACED/TASK_STOPPED and will
result in misbehaviour.
As such, add additional state to task->jobctl to track this state
outside of task->__state.
NOTE: this doesn't actually fix anything yet, just adds extra state.
--EWB
* didn't add a unnecessary newline in signal.h
* Update t->jobctl in signal_wake_up and ptrace_signal_wake_up
instead of in signal_wake_up_state. This prevents the clearing
of TASK_STOPPED and TASK_TRACED from getting lost.
* Added warnings if JOBCTL_STOPPED or JOBCTL_TRACED are not cleared
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220421150654.757693825@infradead.org
Tested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lkml.kernel.org/r/20220505182645.497868-12-ebiederm@xmission.com
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Stop playing with tsk->__state to remove TASK_WAKEKILL while a ptrace
command is executing.
Instead remove TASK_WAKEKILL from the definition of TASK_TRACED, and
implement a new jobctl flag TASK_PTRACE_FROZEN. This new flag is set
in jobctl_freeze_task and cleared when ptrace_stop is awoken or in
jobctl_unfreeze_task (when ptrace_stop remains asleep).
In signal_wake_up add __TASK_TRACED to state along with TASK_WAKEKILL
when the wake up is for a fatal signal. Skip adding __TASK_TRACED
when TASK_PTRACE_FROZEN is not set. This has the same effect as
changing TASK_TRACED to __TASK_TRACED as all of the wake_ups that use
TASK_KILLABLE go through signal_wake_up.
Handle a ptrace_stop being called with a pending fatal signal.
Previously it would have been handled by schedule simply failing to
sleep. As TASK_WAKEKILL is no longer part of TASK_TRACED schedule
will sleep with a fatal_signal_pending. The code in signal_wake_up
guarantees that the code will be awaked by any fatal signal that
codes after TASK_TRACED is set.
Previously the __state value of __TASK_TRACED was changed to
TASK_RUNNING when woken up or back to TASK_TRACED when the code was
left in ptrace_stop. Now when woken up ptrace_stop now clears
JOBCTL_PTRACE_FROZEN and when left sleeping ptrace_unfreezed_traced
clears JOBCTL_PTRACE_FROZEN.
Tested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lkml.kernel.org/r/20220505182645.497868-10-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Long ago and far away there was a BUG_ON at the start of ptrace_stop
that did "BUG_ON(!(current->ptrace & PT_PTRACED));" [1]. The BUG_ON
had never triggered but examination of the code showed that the BUG_ON
could actually trigger. To complement removing the BUG_ON an attempt
to better handle the race was added.
The code detected the tracer had gone away and did not call
do_notify_parent_cldstop. The code also attempted to prevent
ptrace_report_syscall from sending spurious SIGTRAPs when the tracer
went away.
The code to detect when the tracer had gone away before sending a
signal to tracer was a legitimate fix and continues to work to this
date.
The code to prevent sending spurious SIGTRAPs is a failure. At the
time and until today the code only catches it when the tracer goes
away after siglock is dropped and before read_lock is acquired. If
the tracer goes away after read_lock is dropped a spurious SIGTRAP can
still be sent to the tracee. The tracer going away after read_lock
is dropped is the far likelier case as it is the bigger window.
Given that the attempt to prevent the generation of a SIGTRAP was a
failure and continues to be a failure remove the code that attempts to
do that. This simplifies the code in ptrace_stop and makes
ptrace_stop much easier to reason about.
To successfully deal with the tracer going away, all of the tracer's
instrumentation of the child would need to be removed, and reliably
detecting when the tracer has set a signal to continue with would need
to be implemented.
[1] 66519f549ae5 ("[PATCH] fix ptracer death race yielding bogus BUG_ON")
History-Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git
Tested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lkml.kernel.org/r/20220505182645.497868-9-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
After ptrace_freeze_traced succeeds it is known that the tracee
has a __state value of __TASK_TRACED and that no __ptrace_unlink will
happen because the tracer is waiting for the tracee, and the tracee is
in ptrace_stop.
The function ptrace_freeze_traced can succeed at any point after
ptrace_stop has set TASK_TRACED and dropped siglock. The read_lock on
tasklist_lock only excludes ptrace_attach.
This means that the !current->ptrace which executes under a read_lock
of tasklist_lock will never see a ptrace_freeze_trace as the tracer
must have gone away before the tasklist_lock was taken and
ptrace_attach can not occur until the read_lock is dropped. As
ptrace_freeze_traced depends upon ptrace_attach running before it can
run that excludes ptrace_freeze_traced until __state is set to
TASK_RUNNING. This means that task_is_traced will fail in
ptrace_freeze_attach and ptrace_freeze_attached will fail.
On the current->ptrace branch of ptrace_stop which will be reached any
time after ptrace_freeze_traced has succeed it is known that __state
is __TASK_TRACED and schedule() will be called with that state.
Use a WARN_ON_ONCE to document that wait_task_inactive(TASK_TRACED)
should never fail. Remove the stale comment about may_ptrace_stop.
Strictly speaking this is not true because if PREEMPT_RT is enabled
wait_task_inactive can fail because __state can be changed. I don't
see this as a problem as the ptrace code is currently broken on
PREMPT_RT, and this is one of the issues. Failing and warning when
the assumptions of the code are broken is good.
Tested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lkml.kernel.org/r/20220505182645.497868-8-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
The current implementation of PTRACE_KILL is buggy and has been for
many years as it assumes it's target has stopped in ptrace_stop. At a
quick skim it looks like this assumption has existed since ptrace
support was added in linux v1.0.
While PTRACE_KILL has been deprecated we can not remove it as
a quick search with google code search reveals many existing
programs calling it.
When the ptracee is not stopped at ptrace_stop some fields would be
set that are ignored except in ptrace_stop. Making the userspace
visible behavior of PTRACE_KILL a noop in those case.
As the usual rules are not obeyed it is not clear what the
consequences are of calling PTRACE_KILL on a running process.
Presumably userspace does not do this as it achieves nothing.
Replace the implementation of PTRACE_KILL with a simple
send_sig_info(SIGKILL) followed by a return 0. This changes the
observable user space behavior only in that PTRACE_KILL on a process
not stopped in ptrace_stop will also kill it. As that has always
been the intent of the code this seems like a reasonable change.
Cc: stable@vger.kernel.org
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lkml.kernel.org/r/20220505182645.497868-7-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
The last remaining implementation of arch_ptrace_attach is ia64's
ptrace_attach_sync_user_rbs which was added at the end of 2007 in
commit aa91a2e900 ("[IA64] Synchronize RBS on PTRACE_ATTACH").
Reading the comments and examining the code ptrace_attach_sync_user_rbs
has the sole purpose of saving registers to the stack when ptrace_attach
changes TASK_STOPPED to TASK_TRACED. In all other cases arch_ptrace_stop
takes care of the register saving.
In commit d79fdd6d96 ("ptrace: Clean transitions between TASK_STOPPED and TRACED")
modified ptrace_attach to wake up the thread and enter ptrace_stop normally even
when the thread starts out stopped.
This makes ptrace_attach_sync_user_rbs completely unnecessary. So just
remove it.
I read through the code to verify that ptrace_attach_sync_user_rbs is
unnecessary. What I found is that the code is quite dead.
Reading ptrace_attach_sync_user_rbs it is easy to see that the it does
nothing unless __state == TASK_STOPPED.
Calling arch_ptrace_attach (aka ptrace_attach_sync_user_rbs) after
ptrace_traceme it is easy to see that because we are talking about the
current process the value of __state is TASK_RUNNING. Which means
ptrace_attach_sync_user_rbs does nothing.
The only other call of arch_ptrace_attach (aka
ptrace_attach_sync_user_rbs) is after ptrace_attach.
If the task is running (and PTRACE_SEIZE is not specified), a SIGSTOP
is sent which results in do_signal_stop setting JOBCTL_TRAP_STOP on
the target task (as it is ptraced) and the target task stopping
in ptrace_stop with __state == TASK_TRACED.
If the task was already stopped then ptrace_attach sets
JOBCTL_TRAPPING and JOBCTL_TRAP_STOP, wakes it out of __TASK_STOPPED,
and waits until the JOBCTL_TRAPPING_BIT is clear. At which point
the task stops in ptrace_stop.
In both cases there are a couple of funning excpetions such as if the
traced task receiveds a SIGCONT, or is set a fatal signal.
However in all of those cases the tracee never stops in __state
TASK_STOPPED. Which is a long way of saying that ptrace_attach_sync_user_rbs
is guaranteed never to do anything.
Cc: linux-ia64@vger.kernel.org
Tested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lkml.kernel.org/r/20220505182645.497868-4-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
The function __group_send_sig_info is just a light wrapper around
send_signal_locked with one parameter fixed to a constant value. As
the wrapper adds no real value update the code to directly call the
wrapped function.
Tested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lkml.kernel.org/r/20220505182645.497868-2-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Rename send_signal and __send_signal to send_signal_locked and
__send_signal_locked to make send_signal usable outside of
signal.c.
Tested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lkml.kernel.org/r/20220505182645.497868-1-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Currently both expedited and regular grace period stall warnings use
a single timeout value that with units of seconds. However, recent
Android use cases problem require a sub-100-millisecond expedited RCU CPU
stall warning. Given that expedited RCU grace periods normally complete
in far less than a single millisecond, especially for small systems,
this is not unreasonable.
Therefore introduce the CONFIG_RCU_EXP_CPU_STALL_TIMEOUT kernel
configuration that defaults to 20 msec on Android and remains the same
as that of the non-expedited stall warnings otherwise. It also can be
changed in run-time via: /sys/.../parameters/rcu_exp_cpu_stall_timeout.
[ paulmck: Default of zero to use CONFIG_RCU_STALL_TIMEOUT. ]
Signed-off-by: Uladzislau Rezki <uladzislau.rezki@sony.com>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
We observed the error "cacheline tracking ENOMEM, dma-debug disabled"
during a light system load (copying some files). The reason for this error
is that the dma_active_cacheline radix tree uses GFP_NOWAIT allocation -
so it can't access the emergency memory reserves and it fails as soon as
anybody reaches the watermark.
This patch changes GFP_NOWAIT to GFP_ATOMIC, so that it can access the
emergency memory reserves.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When dma_direct_alloc_pages encounters a highmem page it just gives up
currently. But what we really should do is to try memory using the
page allocator instead - without this platforms with a global highmem
CMA pool will fail all dma_alloc_pages allocations.
Fixes: efa70f2fdc ("dma-mapping: add a new dma_alloc_pages API")
Reported-by: Mark O'Neill <mao@tumblingdice.co.uk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Qian Cai <quic_qiancai@quicinc.com> wrote:
> Reverting the last 3 commits of the series fixed a boot crash.
>
> 1b2552cbdb fork: Stop allowing kthreads to call execve
> 753550eb0c fork: Explicitly set PF_KTHREAD
> 68d85f0a33 init: Deal with the init process being a user mode process
>
> BUG: KASAN: null-ptr-deref in task_nr_scan_windows.isra.0
> arch_atomic_long_read at ./include/linux/atomic/atomic-long.h:29
> (inlined by) atomic_long_read at ./include/linux/atomic/atomic-instrumented.h:1266
> (inlined by) get_mm_counter at ./include/linux/mm.h:1996
> (inlined by) get_mm_rss at ./include/linux/mm.h:2049
> (inlined by) task_nr_scan_windows at kernel/sched/fair.c:1123
> Read of size 8 at addr 00000000000003d0 by task swapper/0/1
With the change to init and the user mode helper processes to not have
PF_KTHREAD set before they call kernel_execve the PF_KTHREAD test in
task_tick_numa became insufficient to detect all tasks that have
"->mm == NULL". Correct that by testing for "->mm == NULL" directly.
Reported-by: Qian Cai <quic_qiancai@quicinc.com>
Tested-by: Qian Cai <quic_qiancai@quicinc.com>
Fixes: 1b2552cbdb ("fork: Stop allowing kthreads to call execve")
Link: https://lkml.kernel.org/r/87r150ug1l.fsf_-_@email.froward.int.ebiederm.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
In commit e458716a92 ("PM: EM: Mark inefficiencies in CPUFreq"),
cpufreq_cpu_get() is called without a cpufreq_cpu_put(), permanently
increasing the reference counts of the policy struct.
Decrement the reference count once the policy struct is not used
anymore.
Fixes: e458716a92 ("PM: EM: Mark inefficiencies in CPUFreq")
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Vincent Donnefort <vincent.donnefort@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The change to call update_rq_clock() before activate_task()
commit 840d719604 ("sched/deadline: Update rq_clock of later_rq
when pushing a task") is no longer needed since commit f4904815f9
("sched/deadline: Fix double accounting of rq/running bw in push & pull")
removed the add_running_bw() before the activate_task().
So we remove some comments that are no longer needed and update
rq clock in activate_task().
Signed-off-by: Hao Jia <jiahao.os@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Link: https://lore.kernel.org/r/20220430085843.62939-3-jiahao.os@bytedance.com
When we use raw_spin_rq_lock() to acquire the rq lock and have to
update the rq clock while holding the lock, the kernel may issue
a WARN_DOUBLE_CLOCK warning.
Since we directly use raw_spin_rq_lock() to acquire rq lock instead of
rq_lock(), there is no corresponding change to rq->clock_update_flags.
In particular, we have obtained the rq lock of other CPUs, the
rq->clock_update_flags of this CPU may be RQCF_UPDATED at this time, and
then calling update_rq_clock() will trigger the WARN_DOUBLE_CLOCK warning.
So we need to clear RQCF_UPDATED of rq->clock_update_flags to avoid
the WARN_DOUBLE_CLOCK warning.
For the sched_rt_period_timer() and migrate_task_rq_dl() cases
we simply replace raw_spin_rq_lock()/raw_spin_rq_unlock() with
rq_lock()/rq_unlock().
For the {pull,push}_{rt,dl}_task() cases, we add the
double_rq_clock_clear_update() function to clear RQCF_UPDATED of
rq->clock_update_flags, and call double_rq_clock_clear_update()
before double_lock_balance()/double_rq_lock() returns to avoid the
WARN_DOUBLE_CLOCK warning.
Some call trace reports:
Call Trace 1:
<IRQ>
sched_rt_period_timer+0x10f/0x3a0
? enqueue_top_rt_rq+0x110/0x110
__hrtimer_run_queues+0x1a9/0x490
hrtimer_interrupt+0x10b/0x240
__sysvec_apic_timer_interrupt+0x8a/0x250
sysvec_apic_timer_interrupt+0x9a/0xd0
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x12/0x20
Call Trace 2:
<TASK>
activate_task+0x8b/0x110
push_rt_task.part.108+0x241/0x2c0
push_rt_tasks+0x15/0x30
finish_task_switch+0xaa/0x2e0
? __switch_to+0x134/0x420
__schedule+0x343/0x8e0
? hrtimer_start_range_ns+0x101/0x340
schedule+0x4e/0xb0
do_nanosleep+0x8e/0x160
hrtimer_nanosleep+0x89/0x120
? hrtimer_init_sleeper+0x90/0x90
__x64_sys_nanosleep+0x96/0xd0
do_syscall_64+0x34/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
Call Trace 3:
<TASK>
deactivate_task+0x93/0xe0
pull_rt_task+0x33e/0x400
balance_rt+0x7e/0x90
__schedule+0x62f/0x8e0
do_task_dead+0x3f/0x50
do_exit+0x7b8/0xbb0
do_group_exit+0x2d/0x90
get_signal+0x9df/0x9e0
? preempt_count_add+0x56/0xa0
? __remove_hrtimer+0x35/0x70
arch_do_signal_or_restart+0x36/0x720
? nanosleep_copyout+0x39/0x50
? do_nanosleep+0x131/0x160
? audit_filter_inodes+0xf5/0x120
exit_to_user_mode_prepare+0x10f/0x1e0
syscall_exit_to_user_mode+0x17/0x30
do_syscall_64+0x40/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
Call Trace 4:
update_rq_clock+0x128/0x1a0
migrate_task_rq_dl+0xec/0x310
set_task_cpu+0x84/0x1e4
try_to_wake_up+0x1d8/0x5c0
wake_up_process+0x1c/0x30
hrtimer_wakeup+0x24/0x3c
__hrtimer_run_queues+0x114/0x270
hrtimer_interrupt+0xe8/0x244
arch_timer_handler_phys+0x30/0x50
handle_percpu_devid_irq+0x88/0x140
generic_handle_domain_irq+0x40/0x60
gic_handle_irq+0x48/0xe0
call_on_irq_stack+0x2c/0x60
do_interrupt_handler+0x80/0x84
Steps to reproduce:
1. Enable CONFIG_SCHED_DEBUG when compiling the kernel
2. echo 1 > /sys/kernel/debug/clear_warn_once
echo "WARN_DOUBLE_CLOCK" > /sys/kernel/debug/sched/features
echo "NO_RT_PUSH_IPI" > /sys/kernel/debug/sched/features
3. Run some rt/dl tasks that periodically work and sleep, e.g.
Create 2*n rt or dl (90% running) tasks via rt-app (on a system
with n CPUs), and Dietmar Eggemann reports Call Trace 4 when running
on PREEMPT_RT kernel.
Signed-off-by: Hao Jia <jiahao.os@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/20220430085843.62939-2-jiahao.os@bytedance.com
Queued rwlock was originally named "queue rwlock" which wasn't quite
grammatically correct. However there are still some "queue rwlock"
references in the code. Change those to "queued rwlock" for consistency.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220510192134.434753-1-longman@redhat.com
Pass a cookie along with BPF_LINK_CREATE requests.
Add a bpf_cookie field to struct bpf_tracing_link to attach a cookie.
The cookie of a bpf_tracing_link is available by calling
bpf_get_attach_cookie when running the BPF program of the attached
link.
The value of a cookie will be set at bpf_tramp_run_ctx by the
trampoline of the link.
Signed-off-by: Kui-Feng Lee <kuifeng@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220510205923.3206889-4-kuifeng@fb.com
BPF trampolines will create a bpf_tramp_run_ctx, a bpf_run_ctx, on
stacks and set/reset the current bpf_run_ctx before/after calling a
bpf_prog.
Signed-off-by: Kui-Feng Lee <kuifeng@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220510205923.3206889-3-kuifeng@fb.com
Replace struct bpf_tramp_progs with struct bpf_tramp_links to collect
struct bpf_tramp_link(s) for a trampoline. struct bpf_tramp_link
extends bpf_link to act as a linked list node.
arch_prepare_bpf_trampoline() accepts a struct bpf_tramp_links to
collects all bpf_tramp_link(s) that a trampoline should call.
Change BPF trampoline and bpf_struct_ops to pass bpf_tramp_links
instead of bpf_tramp_progs.
Signed-off-by: Kui-Feng Lee <kuifeng@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220510205923.3206889-2-kuifeng@fb.com
Since commit 0953fb2637 ("irq: remove handle_domain_{irq,nmi}()"),
generic_handle_domain_irq() warns if called outside hardirq context, even
though the function calls down to handle_irq_desc(), which warns about the
same, but conditionally on handle_enforce_irqctx().
The newly added warning is a false positive if the interrupt originates
from any other irqchip than x86 APIC or ARM GIC/GICv3. Those are the only
ones for which handle_enforce_irqctx() returns true. Per commit
c16816acd0 ("genirq: Add protection against unsafe usage of
generic_handle_irq()"):
"In general calling generic_handle_irq() with interrupts disabled from non
interrupt context is harmless. For some interrupt controllers like the
x86 trainwrecks this is outright dangerous as it might corrupt state if
an interrupt affinity change is pending."
Examples for interrupt chips where the warning is a false positive are
USB-attached GPIO controllers such as drivers/gpio/gpio-dln2.c:
USB gadgets are incapable of directly signaling an interrupt because they
cannot initiate a bus transaction by themselves. All communication on
the bus is initiated by the host controller, which polls a gadget's
Interrupt Endpoint in regular intervals. If an interrupt is pending,
that information is passed up the stack in softirq context, from which a
hardirq is synthesized via generic_handle_domain_irq().
Remove the warning to eliminate such false positives.
Fixes: 0953fb2637 ("irq: remove handle_domain_{irq,nmi}()")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Jakub Kicinski <kuba@kernel.org>
CC: Linus Walleij <linus.walleij@linaro.org>
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: Octavian Purdila <octavian.purdila@nxp.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220505113207.487861b2@kernel.org
Link: https://lore.kernel.org/r/20220506203242.GA1855@wunner.de
Link: https://lore.kernel.org/r/c3caf60bfa78e5fdbdf483096b7174da65d1813a.1652168866.git.lukas@wunner.de
Using ftrace_lookup_symbols to speed up symbols lookup
in register_fprobe_syms API.
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20220510122616.2652285-4-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding ftrace_lookup_symbols function that resolves array of symbols
with single pass over kallsyms.
The user provides array of string pointers with count and pointer to
allocated array for resolved values.
int ftrace_lookup_symbols(const char **sorted_syms, size_t cnt,
unsigned long *addrs)
It iterates all kallsyms symbols and tries to loop up each in provided
symbols array with bsearch. The symbols array needs to be sorted by
name for this reason.
We also check each symbol to pass ftrace_location, because this API
will be used for fprobe symbols resolving.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20220510122616.2652285-3-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Making kallsyms_on_each_symbol generally available, so it can be
used outside CONFIG_LIVEPATCH option in following changes.
Rather than adding another ifdef option let's make the function
generally available (when CONFIG_KALLSYMS option is defined).
Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20220510122616.2652285-2-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch extends batch operations support for map-in-map map-types:
BPF_MAP_TYPE_HASH_OF_MAPS and BPF_MAP_TYPE_ARRAY_OF_MAPS
A usecase where outer HASH map holds hundred of VIP entries and its
associated reuse-ports per VIP stored in REUSEPORT_SOCKARRAY type
inner map, needs to do batch operation for performance gain.
This patch leverages the exiting generic functions for most of the batch
operations. As map-in-map's value contains the actual reference of the inner map,
for BPF_MAP_TYPE_HASH_OF_MAPS type, it needed an extra step to fetch the
map_id from the reference value.
selftests are added in next patch 2/2.
Signed-off-by: Takshak Chahande <ctakshak@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220510082221.2390540-1-ctakshak@fb.com
New anonymous pages are always mapped natively: only THP/khugepaged code
maps a new compound anonymous page and passes "true". Otherwise, we're
just dealing with simple, non-compound pages.
Let's give the interface clearer semantics and document these. Remove the
PageTransCompound() sanity check from page_add_new_anon_rmap().
Link: https://lkml.kernel.org/r/20220428083441.37290-9-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Don Dutile <ddutile@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Liang Zhang <zhangliang5@huawei.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The func_id parameter in find_kfunc_desc_btf() is not used, get rid of it.
Fixes: 2357672c54 ("bpf: Introduce BPF support for kernel module function calls")
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20220505070114.3522522-1-ytcoode@gmail.com
IF CONFIG_SYSCTL is n, build warn:
kernel/sched/core.c:1782:12: warning: ‘sysctl_sched_uclamp_handler’ defined but not used [-Wunused-function]
static int sysctl_sched_uclamp_handler(struct ctl_table *table, int write,
^~~~~~~~~~~~~~~~~~~~~~~~~~~
sysctl_sched_uclamp_handler() is used while CONFIG_SYSCTL enabled,
wrap all related code with CONFIG_SYSCTL to fix this.
Fixes: 3267e0156c ("sched: Move uclamp_util sysctls to core.c")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
If CONFIG_SYSCTL is n, build warn:
kernel/reboot.c:443:20: error: ‘kernel_reboot_sysctls_init’ defined but not used [-Werror=unused-function]
static void __init kernel_reboot_sysctls_init(void)
^~~~~~~~~~~~~~~~~~~~~~~~~~
Move kernel_reboot_sysctls_init() to #ifdef block to fix this.
Fixes: 06d177662f ("kernel/reboot: move reboot sysctls to its own file")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
With all implementations of aops->readpage converted to aops->read_folio,
we can stop checking whether it's set and remove the member from aops.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Change all the callers of ->readpage to call ->read_folio in preference,
if it exists. This is a transitional duplication, and will be removed
by the end of the series.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
arch_check_user_regs() is used at the moment to verify that struct pt_regs
contains valid values when entering the kernel from userspace. s390 needs
a place in the generic entry code to modify a cpu data structure when
switching from userspace to kernel mode. As arch_check_user_regs() is
exactly this, rename it to arch_enter_from_user_mode().
When entering the kernel from userspace, arch_check_user_regs() is
used to verify that struct pt_regs contains valid values. Note that
the NMI codepath doesn't call this function. s390 needs a place in the
generic entry code to modify a cpu data structure when switching from
userspace to kernel mode. As arch_check_user_regs() is exactly this,
rename it to arch_enter_from_user_mode().
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20220504062351.2954280-2-tmricht@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
- Mark the NMI safe time accessors notrace to prevent tracer recursion
when they are selected as trace clocks.
- John Stultz has a new email address
-----BEGIN PGP SIGNATURE-----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=LX9Y
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2022-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"A fix and an email address update:
- Mark the NMI safe time accessors notrace to prevent tracer
recursion when they are selected as trace clocks.
- John Stultz has a new email address"
* tag 'timers-urgent-2022-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timekeeping: Mark NMI safe time accessors as notrace
MAINTAINERS: Update email address for John Stultz
request/free_irq() can result in a hang because the interrupt thread did
not reach the thread function and got stopped in the kthread core
already. That leaves a state active counter arround which makes a
invocation of synchronized_irq() on that interrupt hang forever. Ensure
that the thread reached the thread function in request_irq() to prevent
that.
-----BEGIN PGP SIGNATURE-----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=f7Ph
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2022-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Thomas Gleixner:
"A fix for the threaded interrupt core.
A quick sequence of request/free_irq() can result in a hang because
the interrupt thread did not reach the thread function and got stopped
in the kthread core already. That leaves a state active counter
arround which makes a invocation of synchronized_irq() on that
interrupt hang forever.
Ensure that the thread reached the thread function in request_irq() to
prevent that"
* tag 'irq-urgent-2022-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Synchronize interrupt thread startup
The stackleak_erase() code dynamically handles being on a task stack or
another stack. In most cases, this is a fixed property of the caller,
which the caller is aware of, as an architecture might always return
using the task stack, or might always return using a trampoline stack.
This patch adds stackleak_erase_on_task_stack() and
stackleak_erase_off_task_stack() functions which callers can use to
avoid on_thread_stack() check and associated redundant work when the
calling stack is known. The existing stackleak_erase() is retained as a
safe default.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Popov <alex.popov@linux.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220427173128.2603085-13-mark.rutland@arm.com
Currently we over-estimate the region of stack which must be erased.
To determine the region to be erased, we scan downwards for a contiguous
block of poison values (or the low bound of the stack). There are a few
minor problems with this today:
* When we find a block of poison values, we include this block within
the region to erase.
As this is included within the region to erase, this causes us to
redundantly overwrite 'STACKLEAK_SEARCH_DEPTH' (128) bytes with
poison.
* As the loop condition checks 'poison_count <= depth', it will run an
additional iteration after finding the contiguous block of poison,
decrementing 'erase_low' once more than necessary.
As this is included within the region to erase, this causes us to
redundantly overwrite an additional unsigned long with poison.
* As we always decrement 'erase_low' after checking an element on the
stack, we always include the element below this within the region to
erase.
As this is included within the region to erase, this causes us to
redundantly overwrite an additional unsigned long with poison.
Note that this is not a functional problem. As the loop condition
checks 'erase_low > task_stack_low', we'll never clobber the
STACK_END_MAGIC. As we always decrement 'erase_low' after this, we'll
never fail to erase the element immediately above the STACK_END_MAGIC.
In total, this can cause us to erase `128 + 2 * sizeof(unsigned long)`
bytes more than necessary, which is unfortunate.
This patch reworks the logic to find the address immediately above the
poisoned region, by finding the lowest non-poisoned address. This is
factored into a stackleak_find_top_of_poison() helper both for clarity
and so that this can be shared with the LKDTM test in subsequent
patches.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Popov <alex.popov@linux.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220427173128.2603085-8-mark.rutland@arm.com
Prior to returning to userspace, we reset current->lowest_stack to a
reasonable high bound. Currently we do this by subtracting the arbitrary
value `THREAD_SIZE/64` from the top of the stack, for reasons lost to
history.
Looking at configurations today:
* On i386 where THREAD_SIZE is 8K, the bound will be 128 bytes. The
pt_regs at the top of the stack is 68 bytes (with 0 to 16 bytes of
padding above), and so this covers an additional portion of 44 to 60
bytes.
* On x86_64 where THREAD_SIZE is at least 16K (up to 32K with KASAN) the
bound will be at least 256 bytes (up to 512 with KASAN). The pt_regs
at the top of the stack is 168 bytes, and so this cover an additional
88 bytes of stack (up to 344 with KASAN).
* On arm64 where THREAD_SIZE is at least 16K (up to 64K with 64K pages
and VMAP_STACK), the bound will be at least 256 bytes (up to 1024 with
KASAN). The pt_regs at the top of the stack is 336 bytes, so this can
fall within the pt_regs, or can cover an additional 688 bytes of
stack.
Clearly the `THREAD_SIZE/64` value doesn't make much sense -- in the
worst case, this will cause more than 600 bytes of stack to be erased
for every syscall, even if actual stack usage were substantially
smaller.
This patches makes this slightly less nonsensical by consistently
resetting current->lowest_stack to the base of the task pt_regs. For
clarity and for consistency with the handling of the low bound, the
generation of the high bound is split into a helper with commentary
explaining why.
Since the pt_regs at the top of the stack will be clobbered upon the
next exception entry, we don't need to poison these at exception exit.
By using task_pt_regs() as the high stack boundary instead of
current_top_of_stack() we avoid some redundant poisoning, and the
compiler can share the address generation between the poisoning and
resetting of `current->lowest_stack`, making the generated code more
optimal.
It's not clear to me whether the existing `THREAD_SIZE/64` offset was a
dodgy heuristic to skip the pt_regs, or whether it was attempting to
minimize the number of times stackleak_check_stack() would have to
update `current->lowest_stack` when stack usage was shallow at the cost
of unconditionally poisoning a small portion of the stack for every exit
to userspace.
For now I've simply removed the offset, and if we need/want to minimize
updates for shallow stack usage it should be easy to add a better
heuristic atop, with appropriate commentary so we know what's going on.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Popov <alex.popov@linux.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220427173128.2603085-7-mark.rutland@arm.com
The logic within __stackleak_erase() can be a little hard to follow, as
`boundary` switches from being the low bound to the high bound mid way
through the function, and `kstack_ptr` is used to represent the start of
the region to erase while `boundary` represents the end of the region to
erase.
Make this a little clearer by consistently using clearer variable names.
The `boundary` variable is removed, the bounds of the region to erase
are described by `erase_low` and `erase_high`, and bounds of the task
stack are described by `task_stack_low` and `task_stack_high`.
As the same time, remove the comment above the variables, since it is
unclear whether it's intended as rationale, a complaint, or a TODO, and
is more confusing than helpful.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Popov <alex.popov@linux.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220427173128.2603085-6-mark.rutland@arm.com
In stackleak_task_init(), stackleak_track_stack(), and
__stackleak_erase(), we open-code skipping the STACK_END_MAGIC at the
bottom of the stack. Each case is implemented slightly differently, and
only the __stackleak_erase() case is commented.
In stackleak_task_init() and stackleak_track_stack() we unconditionally
add sizeof(unsigned long) to the lowest stack address. In
stackleak_task_init() we use end_of_stack() for this, and in
stackleak_track_stack() we use task_stack_page(). In __stackleak_erase()
we handle this by detecting if `kstack_ptr` has hit the stack end
boundary, and if so, conditionally moving it above the magic.
This patch adds a new stackleak_task_low_bound() helper which is used in
all three cases, which unconditionally adds sizeof(unsigned long) to the
lowest address on the task stack, with commentary as to why. This uses
end_of_stack() as stackleak_task_init() did prior to this patch, as this
is consistent with the code in kernel/fork.c which initializes the
STACK_END_MAGIC value.
In __stackleak_erase() we no longer need to check whether we've spilled
into the STACK_END_MAGIC value, as stackleak_track_stack() ensures that
`current->lowest_stack` stops immediately above this, and similarly the
poison scan will stop immediately above this.
For stackleak_task_init() and stackleak_track_stack() this results in no
change to code generation. For __stackleak_erase() the generated
assembly is slightly simpler and shorter.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Popov <alex.popov@linux.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220427173128.2603085-5-mark.rutland@arm.com
In __stackleak_erase() we check that the `erase_low` value derived from
`current->lowest_stack` is above the lowest legitimate stack pointer
value, but this is already enforced by stackleak_track_stack() when
recording the lowest stack value.
Remove the redundant check.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Popov <alex.popov@linux.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220427173128.2603085-4-mark.rutland@arm.com
In stackleak_erase() we check skip_erasing() after accessing some fields
from current. As generating the address of current uses asm which
hazards with the static branch asm, this work is always performed, even
when the static branch is patched to jump to the return at the end of the
function.
This patch avoids this redundant work by moving the skip_erasing() check
earlier.
To avoid complicating initialization within stackleak_erase(), the body
of the function is split out into a __stackleak_erase() helper, with the
check left in a wrapper function. The __stackleak_erase() helper is
marked __always_inline to ensure that this is inlined into
stackleak_erase() and not instrumented.
Before this patch, on x86-64 w/ GCC 11.1.0 the start of the function is:
<stackleak_erase>:
65 48 8b 04 25 00 00 mov %gs:0x0,%rax
00 00
48 8b 48 20 mov 0x20(%rax),%rcx
48 8b 80 98 0a 00 00 mov 0xa98(%rax),%rax
66 90 xchg %ax,%ax <------------ static branch
48 89 c2 mov %rax,%rdx
48 29 ca sub %rcx,%rdx
48 81 fa ff 3f 00 00 cmp $0x3fff,%rdx
After this patch, on x86-64 w/ GCC 11.1.0 the start of the function is:
<stackleak_erase>:
0f 1f 44 00 00 nopl 0x0(%rax,%rax,1) <--- static branch
65 48 8b 04 25 00 00 mov %gs:0x0,%rax
00 00
48 8b 48 20 mov 0x20(%rax),%rcx
48 8b 80 98 0a 00 00 mov 0xa98(%rax),%rax
48 89 c2 mov %rax,%rdx
48 29 ca sub %rcx,%rdx
48 81 fa ff 3f 00 00 cmp $0x3fff,%rdx
Before this patch, on arm64 w/ GCC 11.1.0 the start of the function is:
<stackleak_erase>:
d503245f bti c
d5384100 mrs x0, sp_el0
f9401003 ldr x3, [x0, #32]
f9451000 ldr x0, [x0, #2592]
d503201f nop <------------------------------- static branch
d503233f paciasp
cb030002 sub x2, x0, x3
d287ffe1 mov x1, #0x3fff
eb01005f cmp x2, x1
After this patch, on arm64 w/ GCC 11.1.0 the start of the function is:
<stackleak_erase>:
d503245f bti c
d503201f nop <------------------------------- static branch
d503233f paciasp
d5384100 mrs x0, sp_el0
f9401003 ldr x3, [x0, #32]
d287ffe1 mov x1, #0x3fff
f9451000 ldr x0, [x0, #2592]
cb030002 sub x2, x0, x3
eb01005f cmp x2, x1
While this may not be a huge win on its own, moving the static branch
will permit further optimization of the body of the function in
subsequent patches.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Popov <alex.popov@linux.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220427173128.2603085-3-mark.rutland@arm.com
In preparation for Clang supporting randstruct, reorganize the Kconfigs,
move the attribute macros, and generalize the feature to be named
CONFIG_RANDSTRUCT for on/off, CONFIG_RANDSTRUCT_FULL for the full
randomization mode, and CONFIG_RANDSTRUCT_PERFORMANCE for the cache-line
sized mode.
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220503205503.3054173-4-keescook@chromium.org
According to the current crashkernel=Y,low support in other ARCHes, it's
an optional command-line option. When it doesn't exist, kernel will try
to allocate minimum required memory below 4G automatically.
However, __parse_crashkernel() returns '-EINVAL' for all error cases. It
can't distinguish the nonexistent option from invalid option.
Change __parse_crashkernel() to return '-ENOENT' for the nonexistent option
case. With this change, crashkernel,low memory will take the default
value if crashkernel=,low is not specified; while crashkernel reservation
will fail and bail out if an invalid option is specified.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Acked-by: Baoquan He <bhe@redhat.com>
Link: https://lore.kernel.org/r/20220506114402.365-2-thunder.leizhen@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
For out-of-tree builds, this script invokes cpio twice to copy header
files from the srctree and subsequently from the objtree. According to a
comment in the script, there might be situations in which certain files
already exist in the destination directory when header files are copied
from the objtree:
"The second CPIO can complain if files already exist which can happen
with out of tree builds having stale headers in srctree. Just silence
CPIO for now."
GNU cpio might simply print a warning like "newer or same age version
exists", but toybox cpio exits with a non-zero exit code unless the
command line option "-u" is specified.
To improve compatibility with toybox cpio, add the command line option
"-u" to unconditionally replace existing files in the destination
directory.
Signed-off-by: Daniel Mentz <danielmentz@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Instead of implicitly inheriting PF_KTHREAD from the parent process
examine arguments in kernel_clone_args to see if PF_KTHREAD should be
set. This makes knowledge of which new threads are kernel threads
explicit.
This also makes it so that init and the user mode helper processes
no longer have PF_KTHREAD set.
Link: https://lkml.kernel.org/r/20220506141512.516114-6-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Add fn and fn_arg members into struct kernel_clone_args and test for
them in copy_thread (instead of testing for PF_KTHREAD | PF_IO_WORKER).
This allows any task that wants to be a user space task that only runs
in kernel mode to use this functionality.
The code on x86 is an exception and still retains a PF_KTHREAD test
because x86 unlikely everything else handles kthreads slightly
differently than user space tasks that start with a function.
The functions that created tasks that start with a function
have been updated to set ".fn" and ".fn_arg" instead of
".stack" and ".stack_size". These functions are fork_idle(),
create_io_thread(), kernel_thread(), and user_mode_thread().
Link: https://lkml.kernel.org/r/20220506141512.516114-4-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
The architectures ia64 and parisc have special handling for the idle
thread in copy_process. Add a flag named idle to kernel_clone_args
and use it to explicity test if an idle process is being created.
Fullfill the expectations of the rest of the copy_thread
implemetations and pass a function pointer in .stack from fork_idle().
This makes what is happening in copy_thread better defined, and is
useful to make idle threads less special.
Link: https://lkml.kernel.org/r/20220506141512.516114-3-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
With io_uring we have started supporting tasks that are for most
purposes user space tasks that exclusively run code in kernel mode.
The kernel task that exec's init and tasks that exec user mode
helpers are also user mode tasks that just run kernel code
until they call kernel execve.
Pass kernel_clone_args into copy_thread so these oddball
tasks can be supported more cleanly and easily.
v2: Fix spelling of kenrel_clone_args on h8300
Link: https://lkml.kernel.org/r/20220506141512.516114-2-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
If kthread_is_per_cpu runs concurrently with free_kthread_struct the
kthread_struct that was just freed may be read from.
This bug was introduced by commit 40966e316f ("kthread: Ensure
struct kthread is present for all kthreads"). When kthread_struct
started to be allocated for all tasks that have PF_KTHREAD set. This
in turn required the kthread_struct to be freed in kernel_execve and
violated the assumption that kthread_struct will have the same
lifetime as the task.
Looking a bit deeper this only applies to callers of kernel_execve
which is just the init process and the user mode helper processes.
These processes really don't want to be kernel threads but are for
historical reasons. Mostly that copy_thread does not know how to take
a kernel mode function to the process with for processes without
PF_KTHREAD or PF_IO_WORKER set.
Solve this by not allocating kthread_struct for the init process and
the user mode helper processes.
This is done by adding a kthread member to struct kernel_clone_args.
Setting kthread in fork_idle and kernel_thread. Adding
user_mode_thread that works like kernel_thread except it does not set
kthread. In fork only allocating the kthread_struct if .kthread is set.
I have looked at kernel/kthread.c and since commit 40966e316f
("kthread: Ensure struct kthread is present for all kthreads") there
have been no assumptions added that to_kthread or __to_kthread will
not return NULL.
There are a few callers of to_kthread or __to_kthread that assume a
non-NULL struct kthread pointer will be returned. These functions are
kthread_data(), kthread_parmme(), kthread_exit(), kthread(),
kthread_park(), kthread_unpark(), kthread_stop(). All of those functions
can reasonably expected to be called when it is know that a task is a
kthread so that assumption seems reasonable.
Cc: stable@vger.kernel.org
Fixes: 40966e316f ("kthread: Ensure struct kthread is present for all kthreads")
Reported-by: Максим Кутявин <maximkabox13@gmail.com>
Link: https://lkml.kernel.org/r/20220506141512.516114-1-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
The original intent of the 'console' tracepoint per the commit 9510035849
("printk/tracing: Add console output tracing") had been to "[...] record
any printk messages into the trace, regardless of the current console
loglevel. This can help correlate (existing) printk debugging with other
tracing."
Petr points out [1] that calling trace_console_rcuidle() in
call_console_driver() had been the wrong thing for a while, because
"printk() always used console_trylock() and the message was flushed to
the console only when the trylock succeeded. And it was always deferred
in NMI or when printed via printk_deferred()."
With the commit 09c5ba0aa2 ("printk: add kthread console printers"),
things only got worse, and calls to call_console_driver() no longer
happen with typical printk() calls but always appear deferred [2].
As such, the tracepoint can no longer serve its purpose to clearly
correlate printk() calls and other tracing, as well as breaks usecases
that expect every printk() call to result in a callback of the console
tracepoint. Notably, the KFENCE and KCSAN test suites, which want to
capture console output and assume a printk() immediately gives us a
callback to the console tracepoint.
Fix the console tracepoint by moving it into printk_sprint() [3].
One notable difference is that by moving tracing into printk_sprint(),
the 'text' will no longer include the "header" (loglevel and timestamp),
but only the raw message. Arguably this is less of a problem now that
the console tracepoint happens on the printk() call and isn't delayed.
Link: https://lore.kernel.org/all/Ym+WqKStCg%2FEHfh3@alley/ [1]
Link: https://lore.kernel.org/all/CA+G9fYu2kS0wR4WqMRsj2rePKV9XLgOU1PiXnMvpT+Z=c2ucHA@mail.gmail.com/ [2]
Link: https://lore.kernel.org/all/87fslup9dx.fsf@jogness.linutronix.de/ [3]
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Marco Elver <elver@google.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Petr Mladek <pmladek@suse.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: John Ogness <john.ogness@linutronix.de>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20220503073844.4148944-1-elver@google.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmJu9FYeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGAyEH/16xtJSpLmLwrQzG
o+4ToQxSQ+/9UHyu0RTEvHg2THm9/8emtIuYyc/5FgdoWctcSa3AaDcveWmuWmkS
KYcdhfJsaEqjNHS3OPYXN84fmo9Hel7263shu5+IYmP/sN0DfQp6UWTryX1q4B3Q
4Pdutkuq63Uwd8nBZ5LXQBumaBrmkkuMgWEdT4+6FOo1mPzwdIGBxCuz1UsNNl5k
chLWxkQfe2eqgWbYJrgCQfrVdORXVtoU2fGilZUNrHRVGkkldXkkz5clJfapyZD3
odmZCEbrE4GPKgZwCmDERMfD1hzhZDtYKiHfOQ506szH5ykJjPBcOjHed7dA60eB
J3+wdek=
=39Ca
-----END PGP SIGNATURE-----
Merge tag 'v5.18-rc5' into sched/core to pull in fixes & to resolve a conflict
- sched/core is on a pretty old -rc1 base - refresh it to include recent fixes.
- this also allows up to resolve a (trivial) .mailmap conflict
Conflicts:
.mailmap
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There are 3 places where the cpu and node masks of the top cpuset can
be initialized in the order they are executed:
1) start_kernel -> cpuset_init()
2) start_kernel -> cgroup_init() -> cpuset_bind()
3) kernel_init_freeable() -> do_basic_setup() -> cpuset_init_smp()
The first cpuset_init() call just sets all the bits in the masks.
The second cpuset_bind() call sets cpus_allowed and mems_allowed to the
default v2 values. The third cpuset_init_smp() call sets them back to
v1 values.
For systems with cgroup v2 setup, cpuset_bind() is called once. As a
result, cpu and memory node hot add may fail to update the cpu and node
masks of the top cpuset to include the newly added cpu or node in a
cgroup v2 environment.
For systems with cgroup v1 setup, cpuset_bind() is called again by
rebind_subsystem() when the v1 cpuset filesystem is mounted as shown
in the dmesg log below with an instrumented kernel.
[ 2.609781] cpuset_bind() called - v2 = 1
[ 3.079473] cpuset_init_smp() called
[ 7.103710] cpuset_bind() called - v2 = 0
smp_init() is called after the first two init functions. So we don't
have a complete list of active cpus and memory nodes until later in
cpuset_init_smp() which is the right time to set up effective_cpus
and effective_mems.
To fix this cgroup v2 mask setup problem, the potentially incorrect
cpus_allowed & mems_allowed setting in cpuset_init_smp() are removed.
For cgroup v2 systems, the initial cpuset_bind() call will set the masks
correctly. For cgroup v1 systems, the second call to cpuset_bind()
will do the right setup.
cc: stable@vger.kernel.org
Signed-off-by: Waiman Long <longman@redhat.com>
Tested-by: Feng Tang <feng.tang@intel.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
A kernel hang can be observed when running setserial in a loop on a kernel
with force threaded interrupts. The sequence of events is:
setserial
open("/dev/ttyXXX")
request_irq()
do_stuff()
-> serial interrupt
-> wake(irq_thread)
desc->threads_active++;
close()
free_irq()
kthread_stop(irq_thread)
synchronize_irq() <- hangs because desc->threads_active != 0
The thread is created in request_irq() and woken up, but does not get on a
CPU to reach the actual thread function, which would handle the pending
wake-up. kthread_stop() sets the should stop condition which makes the
thread immediately exit, which in turn leaves the stale threads_active
count around.
This problem was introduced with commit 519cc8652b, which addressed a
interrupt sharing issue in the PCIe code.
Before that commit free_irq() invoked synchronize_irq(), which waits for
the hard interrupt handler and also for associated threads to complete.
To address the PCIe issue synchronize_irq() was replaced with
__synchronize_hardirq(), which only waits for the hard interrupt handler to
complete, but not for threaded handlers.
This was done under the assumption, that the interrupt thread already
reached the thread function and waits for a wake-up, which is guaranteed to
be handled before acting on the stop condition. The problematic case, that
the thread would not reach the thread function, was obviously overlooked.
Make sure that the interrupt thread is really started and reaches
thread_fn() before returning from __setup_irq().
This utilizes the existing wait queue in the interrupt descriptor. The
wait queue is unused for non-shared interrupts. For shared interrupts the
usage might cause a spurious wake-up of a waiter in synchronize_irq() or the
completion of a threaded handler might cause a spurious wake-up of the
waiter for the ready flag. Both are harmless and have no functional impact.
[ tglx: Amended changelog ]
Fixes: 519cc8652b ("genirq: Synchronize only with single thread on free_irq()")
Signed-off-by: Thomas Pfaff <tpfaff@pcs.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/552fe7b4-9224-b183-bb87-a8f36d335690@pcs.com
This introduces a per-filter flag (SECCOMP_FILTER_FLAG_WAIT_KILLABLE_RECV)
that makes it so that when notifications are received by the supervisor the
notifying process will transition to wait killable semantics. Although wait
killable isn't a set of semantics formally exposed to userspace, the
concept is searchable. If the notifying process is signaled prior to the
notification being received by the userspace agent, it will be handled as
normal.
One quirk about how this is handled is that the notifying process
only switches to TASK_KILLABLE if it receives a wakeup from either
an addfd or a signal. This is to avoid an unnecessary wakeup of
the notifying task.
The reasons behind switching into wait_killable only after userspace
receives the notification are:
* Avoiding unncessary work - Often, workloads will perform work that they
may abort (request racing comes to mind). This allows for syscalls to be
aborted safely prior to the notification being received by the
supervisor. In this, the supervisor doesn't end up doing work that the
workload does not want to complete anyways.
* Avoiding side effects - We don't want the syscall to be interruptible
once the supervisor starts doing work because it may not be trivial
to reverse the operation. For example, unmounting a file system may
take a long time, and it's hard to rollback, or treat that as
reentrant.
* Avoid breaking runtimes - Various runtimes do not GC when they are
during a syscall (or while running native code that subsequently
calls a syscall). If many notifications are blocked, and not picked
up by the supervisor, this can get the application into a bad state.
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220503080958.20220-2-sargun@sargun.me
Commit 9c7ef4c30f12 ("srcu: Make Tree SRCU able to operate without
snp_node array") initializes the local variable sdp differently depending
on the srcu's state in srcu_gp_start(). Either way, this initialization
overwrites the value used when sdp is defined.
This commit therefore drops this pointless definition-time initialization.
Although there is no functional change, compiler code generation may
be affected.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
If an SRCU reader blocks while a synchronize_srcu_expedited() waits for
that same reader, then that grace period will spawn an endless series of
workqueue handlers, consuming a full CPU. This quickly gets pointless
because consuming more CPU isn't going to make that reader get done
faster, especially if it is blocked waiting for an external event.
This commit therefore spawns at most one pair of back-to-back workqueue
handlers per expedited grace period phase, instead inserting increasing
delays as that grace period phase grows older, but capped at 10 jiffies.
In any case, if there have been at least 100 back-to-back workqueue
handlers within a single jiffy, regardless of grace period or grace-period
phase, then a one-jiffy delay is inserted.
[ paulmck: Apply feedback from kernel test robot. ]
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Reported-by: Song Liu <song@kernel.org>
Tested-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit increases the sensitivity of contention detection by adding
checks to the acquisition of the srcu_data structure's lock on the
call_srcu() code path.
Co-developed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds a srcutree.convert_to_big option of zero that causes
SRCU to decide at boot whether to wait for contention (small systems) or
immediately expand to large (large systems). A new srcutree.big_cpu_lim
(defaulting to 128) defines how many CPUs constitute a large system.
Co-developed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmJu9FYeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGAyEH/16xtJSpLmLwrQzG
o+4ToQxSQ+/9UHyu0RTEvHg2THm9/8emtIuYyc/5FgdoWctcSa3AaDcveWmuWmkS
KYcdhfJsaEqjNHS3OPYXN84fmo9Hel7263shu5+IYmP/sN0DfQp6UWTryX1q4B3Q
4Pdutkuq63Uwd8nBZ5LXQBumaBrmkkuMgWEdT4+6FOo1mPzwdIGBxCuz1UsNNl5k
chLWxkQfe2eqgWbYJrgCQfrVdORXVtoU2fGilZUNrHRVGkkldXkkz5clJfapyZD3
odmZCEbrE4GPKgZwCmDERMfD1hzhZDtYKiHfOQ506szH5ykJjPBcOjHed7dA60eB
J3+wdek=
=39Ca
-----END PGP SIGNATURE-----
Backmerge tag 'v5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next
Linux 5.18-rc5
There was a build fix for arm I wanted in drm-next, so backmerge rather then cherry-pick.
Signed-off-by: Dave Airlie <airlied@redhat.com>
kthread_blkcg is only used by the built-in blk-cgroup code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220420042723.1010598-16-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
All callers of bio_blkcg actually want the CSS, so replace it with an
interface that does return the CSS. This now allows to move
struct blkcg_gq to block/blk-cgroup.h instead of exposing it in a
public header.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220420042723.1010598-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass the cgroup_subsys_state instead of a the blkg so that blktrace
doesn't need to poke into blk-cgroup internals, and give the name a
blk prefix as the current name is way too generic for a public
interface.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220420042723.1010598-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use flat rather than nested indentation for chained else/if clauses as
per coding-style.rst:
if (x == y) {
..
} else if (x > y) {
...
} else {
....
}
This also improves readability.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2204240148220.9383@angie.orcam.me.uk
The kernel uses kHz as the unit for clock rates reported between 1MHz
(inclusive) and 4MHz (exclusive), e.g.:
sched_clock: 64 bits at 1000kHz, resolution 1000ns, wraps every 2199023255500ns
This reduces the amount of data lost due to rounding, but hasn't been
replicated for the kHz range when support was added for proper reporting of
sub-kHz clock rates. Take the same approach for rates between 1kHz
(inclusive) and 4kHz (exclusive), which makes it consistent.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2204240106380.9383@angie.orcam.me.uk
The frequency reported for clock sources are rounded down, which gives
misleading figures, e.g.:
I/O ASIC clock frequency 24999480Hz
sched_clock: 32 bits at 24MHz, resolution 40ns, wraps every 85901132779ns
MIPS counter frequency 59998512Hz
sched_clock: 32 bits at 59MHz, resolution 16ns, wraps every 35792281591ns
Rounding to nearest is more adequate:
I/O ASIC clock frequency 24999664Hz
sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 85900499947ns
MIPS counter frequency 59999728Hz
sched_clock: 32 bits at 60MHz, resolution 16ns, wraps every 35791556599ns
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2204240055590.9383@angie.orcam.me.uk
pm_runtime_resume_and_get() achieves the same and simplifies the code.
[ tglx: Simplify it further by presetting retval ]
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20220418110716.2559453-1-chi.minghao@zte.com.cn
Accessing timekeeper::offset_boot in ktime_get_boot_fast_ns() is an
intended data race as the reader side cannot synchronize with a writer and
there is no space in struct tk_read_base of the NMI safe timekeeper.
Mark it so.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20220415091920.956045162@linutronix.de
The PASID is being freed too early. It needs to stay around until after
device drivers that might be using it have had a chance to clear it out
of the hardware.
The relevant refcounts are:
mmget() /mmput() refcount the mm's address space
mmgrab()/mmdrop() refcount the mm itself
The PASID is currently tied to the life of the mm's address space and freed
in __mmput(). This makes logical sense because the PASID can't be used
once the address space is gone.
But, this misses an important point: even after the address space is gone,
the PASID will still be programmed into a device. Device drivers might,
for instance, still need to flush operations that are outstanding and need
to use that PASID. They do this at file->release() time.
Device drivers call the IOMMU driver to hold a reference on the mm itself
and drop it at file->release() time. But, the IOMMU driver holds a
reference on the mm itself, not the address space. The address space (and
the PASID) is long gone by the time the driver tries to clean up. This is
effectively a use-after-free bug on the PASID.
To fix this, move the PASID free operation from __mmput() to __mmdrop().
This ensures that the IOMMU driver's existing mmgrab() keeps the PASID
allocated until it drops its mm reference.
Fixes: 701fac4038 ("iommu/sva: Assign a PASID to mm on PASID allocation and free it on mm exit")
Reported-by: Zhangfei Gao <zhangfei.gao@foxmail.com>
Suggested-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Suggested-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Zhangfei Gao <zhangfei.gao@foxmail.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/20220428180041.806809-1-fenghua.yu@intel.com
flush_smp_call_function_queue() invokes do_softirq() which is not available
on PREEMPT_RT. flush_smp_call_function_queue() is invoked from the idle
task and the migration task with preemption or interrupts disabled.
So RT kernels cannot process soft interrupts in that context as that has to
acquire 'sleeping spinlocks' which is not possible with preemption or
interrupts disabled and forbidden from the idle task anyway.
The currently known SMP function call which raises a soft interrupt is in
the block layer, but this functionality is not enabled on RT kernels due to
latency and performance reasons.
RT could wake up ksoftirqd unconditionally, but this wants to be avoided if
there were soft interrupts pending already when this is invoked in the
context of the migration task. The migration task might have preempted a
threaded interrupt handler which raised a soft interrupt, but did not reach
the local_bh_enable() to process it. The "running" ksoftirqd might prevent
the handling in the interrupt thread context which is causing latency
issues.
Add a new function which handles this case explicitely for RT and falls
back to do_softirq() on !RT kernels. In the RT case this warns when one of
the flushed SMP function calls raised a soft interrupt so this can be
investigated.
[ tglx: Moved the RT part out of SMP code ]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/YgKgL6aPj8aBES6G@linutronix.de
Link: https://lore.kernel.org/r/20220413133024.356509586@linutronix.de
This is invoked from the stopper thread too, which is definitely not idle.
Rename it to flush_smp_call_function_queue() and fixup the callers.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220413133024.305001096@linutronix.de
A W=1 build emits more than a dozen missing prototype warnings related to
scheduler and scheduler specific includes.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220413133024.249118058@linutronix.de
Some use cases don't always need an IPI when sending a TWA_SIGNAL
notification. Add TWA_SIGNAL_NO_IPI, which is just like TWA_SIGNAL, except
it doesn't send an IPI to the target task. It merely sets
TIF_NOTIFY_SIGNAL and wakes up the task.
This can be useful in avoiding a forceful transition to the kernel if the
task is running in userspace. Depending on the task_work in question, it
may be quite fine waiting for the next reschedule or kernel enter anyway,
or the use case may even have other mechanisms for hinting to the task
that a transition may be useful. This can drive more cooperative
scheduling of task_work.
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/821f42b6-7d91-8074-8212-d34998097de4@kernel.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If getdelays runs in a non-init network namespace, it will fail in getting
delayacct stats even if it has privilege of root user, which seems to be
not very reasonable. We can simply reproduce this by executing commands:
unshare -n
getdelays -d -p <pid>
I don't think net namespace should be an obstacle to the normal execution
of getdelay function. So let's make it available from all net namespaces.
Link: https://lkml.kernel.org/r/20220412071946.2532318-1-xu.xin16@zte.com.cn
Signed-off-by: xu xin <xu.xin16@zte.com.cn>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Yang Yang <yang.yang29@zte.com.cn>
Cc: "Dr. Thomas Orgis" <thomas.orgis@uni-hamburg.de>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Ismael Luceno <ismael@iodev.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The task exit struct needs some crucial information to be able to provide
an enhanced version of process and thread accounting. This change
provides:
1. ac_tgid in additon to ac_pid
2. thread group execution walltime in ac_tgetime
3. flag AGROUP in ac_flag to indicate the last task
in a thread group / process
4. device ID and inode of task's /proc/self/exe in
ac_exe_dev and ac_exe_inode
5. tools/accounting/procacct as demonstrator
When a task exits, taskstats are reported to userspace including the
task's pid and ppid, but without the id of the thread group this task is
part of. Without the tgid, the stats of single tasks cannot be correlated
to each other as a thread group (process).
The taskstats documentation suggests that on process exit a data set
consisting of accumulated stats for the whole group is produced. But such
an additional set of stats is only produced for actually multithreaded
processes, not groups that had only one thread, and also those stats only
contain data about delay accounting and not the more basic information
about CPU and memory resource usage. Adding the AGROUP flag to be set
when the last task of a group exited enables determination of process end
also for single-threaded processes.
My applicaton basically does enhanced process accounting with summed
cputime, biggest maxrss, tasks per process. The data is not available
with the traditional BSD process accounting (which is not designed to be
extensible) and the taskstats interface allows more efficient on-the-fly
grouping and summing of the stats, anyway, without intermediate disk
writes.
Furthermore, I do carry statistics on which exact program binary is used
how often with associated resources, getting a picture on how important
which parts of a collection of installed scientific software in different
versions are, and how well they put load on the machine. This is enabled
by providing information on /proc/self/exe for each task. I assume the
two 64-bit fields for device ID and inode are more appropriate than the
possibly large resolved path to keep the data volume down.
Add the tgid to the stats to complete task identification, the flag AGROUP
to mark the last task of a group, the group wallclock time, and
inode-based identification of the associated executable file.
Add tools/accounting/procacct.c as a simplified fork of getdelays.c to
demonstrate process and thread accounting.
[thomas.orgis@uni-hamburg.de: fix version number in comment]
Link: https://lkml.kernel.org/r/20220405003601.7a5f6008@plasteblaster
Link: https://lkml.kernel.org/r/20220331004106.64e5616b@plasteblaster
Signed-off-by: Dr. Thomas Orgis <thomas.orgis@uni-hamburg.de>
Reviewed-by: Ismael Luceno <ismael@iodev.co.uk>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: xu xin <xu.xin16@zte.com.cn>
Cc: Yang Yang <yang.yang29@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Get rid of redundant assignments which end up in values not being read
either because they are overwritten or the function ends.
Reported by clang-tidy [deadcode.DeadStores]
Link: https://lkml.kernel.org/r/20220326180948.192154-1-michalorzel.eng@gmail.com
Signed-off-by: Michal Orzel <michalorzel.eng@gmail.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Michal Orzel <michalorzel.eng@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "ptrace: do some cleanup".
This patch (of 3):
PTRACE_SINGLESTEP is always defined as 9 in include/uapi/linux/ptrace.h,
remove redudant check of #ifdef PTRACE_SINGLESTEP.
Link: https://lkml.kernel.org/r/1649240981-11024-2-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
As in "kernel/panic.c: remove CONFIG_PANIC_ON_OOPS_VALUE indirection",
use the IS_ENABLED() helper rather than having a hidden config option.
Link: https://lkml.kernel.org/r/20220321121301.1389693-1-linux@rasmusvillemoes.dk
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Previously, the seccomp notifier used LIFO semantics, where each
notification would be added on top of the stack, and notifications
were popped off the top of the stack. This could result one process
that generates a large number of notifications preventing other
notifications from being handled. This patch moves from LIFO (stack)
semantics to FIFO (queue semantics).
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220428015447.13661-1-sargun@sargun.me
The ftrace_[enable,disable]_ftrace_graph_caller() are used to do
special hooks for graph tracer, which are not needed on some ARCHs
that use graph_ops:func function to install return_hooker.
So introduce the weak version in ftrace core code to cleanup
in x86.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20220420160006.17880-1-zhouchengming@bytedance.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
cfs_rq_tg_path() is used by a tracepoint-to traceevent (tp-2-te)
converter to format the path of a taskgroup or autogroup respectively.
It doesn't have any in-kernel users after the removal of the
sched_trace_cfs_rq_path() helper function.
cfs_rq_tg_path() can be coded in a tp-2-te converter.
Remove it from kernel/sched/fair.c.
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220428144338.479094-3-qais.yousef@arm.com
We no longer need them as we can use DWARF debug info or BTF + pahole to
re-generate the required structs to compile against them for a given
kernel.
This moves the burden of maintaining these helper functions to the
module.
https://github.com/qais-yousef/sched_tp
Note that pahole v1.15 is required at least for using DWARF. And for BTF
v1.23 which is not yet released will be required. There's alignment
problem that will lead to crashes in earlier versions when used with
BTF.
We should have enough infrastructure to make these helper functions now
obsolete, so remove them.
[Rewrote commit message to reflect the new alternative]
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220428144338.479094-2-qais.yousef@arm.com
Except the 'task has no contribution or is new' condition at the
beginning of cpu_util_without(), which it shares with the load and
runnable counterpart functions, a cpu_util_next(..., dst_cpu = -1)
call can replace the rest of it.
The UTIL_EST specific check that task util_est has to be subtracted
from the CPU one in case of an enqueued (or current (to cater for the
wakeup - lb race)) task has to be moved to cpu_util_next().
This was initially introduced by commit c469933e77
("sched/fair: Fix cpu_util_wake() for 'execl' type workloads").
UnixBench's `execl` throughput tests were run on the dual socket 40
CPUs Intel E5-2690 v2 to make sure it doesn't regress again.
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20220318163656.954440-1-dietmar.eggemann@arm.com
and netfilter.
Current release - new code bugs:
- bridge: switchdev: check br_vlan_group() return value
- use this_cpu_inc() to increment net->core_stats, fix preempt-rt
Previous releases - regressions:
- eth: stmmac: fix write to sgmii_adapter_base
Previous releases - always broken:
- netfilter: nf_conntrack_tcp: re-init for syn packets only,
resolving issues with TCP fastopen
- tcp: md5: fix incorrect tcp_header_len for incoming connections
- tcp: fix F-RTO may not work correctly when receiving DSACK
- tcp: ensure use of most recently sent skb when filling rate samples
- tcp: fix potential xmit stalls caused by TCP_NOTSENT_LOWAT
- virtio_net: fix wrong buf address calculation when using xdp
- xsk: fix forwarding when combining copy mode with busy poll
- xsk: fix possible crash when multiple sockets are created
- bpf: lwt: fix crash when using bpf_skb_set_tunnel_key() from
bpf_xmit lwt hook
- sctp: null-check asoc strreset_chunk in sctp_generate_reconf_event
- wireguard: device: check for metadata_dst with skb_valid_dst()
- netfilter: update ip6_route_me_harder to consider L3 domain
- gre: make o_seqno start from 0 in native mode
- gre: switch o_seqno to atomic to prevent races in collect_md mode
Misc:
- add Eric Dumazet to networking maintainers
- dt: dsa: realtek: remove realtek,rtl8367s string
- netfilter: flowtable: Remove the empty file
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=XOSt
-----END PGP SIGNATURE-----
Merge tag 'net-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, bpf and netfilter.
Current release - new code bugs:
- bridge: switchdev: check br_vlan_group() return value
- use this_cpu_inc() to increment net->core_stats, fix preempt-rt
Previous releases - regressions:
- eth: stmmac: fix write to sgmii_adapter_base
Previous releases - always broken:
- netfilter: nf_conntrack_tcp: re-init for syn packets only,
resolving issues with TCP fastopen
- tcp: md5: fix incorrect tcp_header_len for incoming connections
- tcp: fix F-RTO may not work correctly when receiving DSACK
- tcp: ensure use of most recently sent skb when filling rate samples
- tcp: fix potential xmit stalls caused by TCP_NOTSENT_LOWAT
- virtio_net: fix wrong buf address calculation when using xdp
- xsk: fix forwarding when combining copy mode with busy poll
- xsk: fix possible crash when multiple sockets are created
- bpf: lwt: fix crash when using bpf_skb_set_tunnel_key() from
bpf_xmit lwt hook
- sctp: null-check asoc strreset_chunk in sctp_generate_reconf_event
- wireguard: device: check for metadata_dst with skb_valid_dst()
- netfilter: update ip6_route_me_harder to consider L3 domain
- gre: make o_seqno start from 0 in native mode
- gre: switch o_seqno to atomic to prevent races in collect_md mode
Misc:
- add Eric Dumazet to networking maintainers
- dt: dsa: realtek: remove realtek,rtl8367s string
- netfilter: flowtable: Remove the empty file"
* tag 'net-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (65 commits)
tcp: fix F-RTO may not work correctly when receiving DSACK
Revert "ibmvnic: Add ethtool private flag for driver-defined queue limits"
net: enetc: allow tc-etf offload even with NETIF_F_CSUM_MASK
ixgbe: ensure IPsec VF<->PF compatibility
MAINTAINERS: Update BNXT entry with firmware files
netfilter: nft_socket: only do sk lookups when indev is available
net: fec: add missing of_node_put() in fec_enet_init_stop_mode()
bnx2x: fix napi API usage sequence
tls: Skip tls_append_frag on zero copy size
Add Eric Dumazet to networking maintainers
netfilter: conntrack: fix udp offload timeout sysctl
netfilter: nf_conntrack_tcp: re-init for syn packets only
net: dsa: lantiq_gswip: Don't set GSWIP_MII_CFG_RMII_CLK
net: Use this_cpu_inc() to increment net->core_stats
Bluetooth: hci_sync: Cleanup hci_conn if it cannot be aborted
Bluetooth: hci_event: Fix creating hci_conn object on error status
Bluetooth: hci_event: Fix checking for invalid handle on error status
ice: fix use-after-free when deinitializing mailbox snapshot
ice: wait 5 s for EMP reset after firmware flash
ice: Protect vf_state check by cfg_lock in ice_vc_process_vf_msg()
...
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-04-27
We've added 85 non-merge commits during the last 18 day(s) which contain
a total of 163 files changed, 4499 insertions(+), 1521 deletions(-).
The main changes are:
1) Teach libbpf to enhance BPF verifier log with human-readable and relevant
information about failed CO-RE relocations, from Andrii Nakryiko.
2) Add typed pointer support in BPF maps and enable it for unreferenced pointers
(via probe read) and referenced ones that can be passed to in-kernel helpers,
from Kumar Kartikeya Dwivedi.
3) Improve xsk to break NAPI loop when rx queue gets full to allow for forward
progress to consume descriptors, from Maciej Fijalkowski & Björn Töpel.
4) Fix a small RCU read-side race in BPF_PROG_RUN routines which dereferenced
the effective prog array before the rcu_read_lock, from Stanislav Fomichev.
5) Implement BPF atomic operations for RV64 JIT, and add libbpf parsing logic
for USDT arguments under riscv{32,64}, from Pu Lehui.
6) Implement libbpf parsing of USDT arguments under aarch64, from Alan Maguire.
7) Enable bpftool build for musl and remove nftw with FTW_ACTIONRETVAL usage
so it can be shipped under Alpine which is musl-based, from Dominique Martinet.
8) Clean up {sk,task,inode} local storage trace RCU handling as they do not
need to use call_rcu_tasks_trace() barrier, from KP Singh.
9) Improve libbpf API documentation and fix error return handling of various
API functions, from Grant Seltzer.
10) Enlarge offset check for bpf_skb_{load,store}_bytes() helpers given data
length of frags + frag_list may surpass old offset limit, from Liu Jian.
11) Various improvements to prog_tests in area of logging, test execution
and by-name subtest selection, from Mykola Lysenko.
12) Simplify map_btf_id generation for all map types by moving this process
to build time with help of resolve_btfids infra, from Menglong Dong.
13) Fix a libbpf bug in probing when falling back to legacy bpf_probe_read*()
helpers; the probing caused always to use old helpers, from Runqing Yang.
14) Add support for ARCompact and ARCv2 platforms for libbpf's PT_REGS
tracing macros, from Vladimir Isaev.
15) Cleanup BPF selftests to remove old & unneeded rlimit code given kernel
switched to memcg-based memory accouting a while ago, from Yafang Shao.
16) Refactor of BPF sysctl handlers to move them to BPF core, from Yan Zhu.
17) Fix BPF selftests in two occasions to work around regressions caused by latest
LLVM to unblock CI until their fixes are worked out, from Yonghong Song.
18) Misc cleanups all over the place, from various others.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (85 commits)
selftests/bpf: Add libbpf's log fixup logic selftests
libbpf: Fix up verifier log for unguarded failed CO-RE relos
libbpf: Simplify bpf_core_parse_spec() signature
libbpf: Refactor CO-RE relo human description formatting routine
libbpf: Record subprog-resolved CO-RE relocations unconditionally
selftests/bpf: Add CO-RE relos and SEC("?...") to linked_funcs selftests
libbpf: Avoid joining .BTF.ext data with BPF programs by section name
libbpf: Fix logic for finding matching program for CO-RE relocation
libbpf: Drop unhelpful "program too large" guess
libbpf: Fix anonymous type check in CO-RE logic
bpf: Compute map_btf_id during build time
selftests/bpf: Add test for strict BTF type check
selftests/bpf: Add verifier tests for kptr
selftests/bpf: Add C tests for kptr
libbpf: Add kptr type tag macros to bpf_helpers.h
bpf: Make BTF type match stricter for release arguments
bpf: Teach verifier about kptr_get kfunc helpers
bpf: Wire up freeing of referenced kptr
bpf: Populate pairs of btf_id and destructor kfunc in btf
bpf: Adapt copy_map_value for multiple offset case
...
====================
Link: https://lore.kernel.org/r/20220427224758.20976-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf 2022-04-27
We've added 5 non-merge commits during the last 20 day(s) which contain
a total of 6 files changed, 34 insertions(+), 12 deletions(-).
The main changes are:
1) Fix xsk sockets when rx and tx are separately bound to the same umem, also
fix xsk copy mode combined with busy poll, from Maciej Fijalkowski.
2) Fix BPF tunnel/collect_md helpers with bpf_xmit lwt hook usage which triggered
a crash due to invalid metadata_dst access, from Eyal Birger.
3) Fix release of page pool in XDP live packet mode, from Toke Høiland-Jørgensen.
4) Fix potential NULL pointer dereference in kretprobes, from Adam Zabrocki.
(Masami & Steven preferred this small fix to be routed via bpf tree given it's
follow-up fix to Masami's rethook work that went via bpf earlier, too.)
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
xsk: Fix possible crash when multiple sockets are created
kprobes: Fix KRETPROBES when CONFIG_KRETPROBE_ON_RETHOOK is set
bpf, lwt: Fix crash when using bpf_skb_set_tunnel_key() from bpf_xmit lwt hook
bpf: Fix release of page_pool in BPF_PROG_RUN in test runner
xsk: Fix l2fwd for copy mode + busy poll combo
====================
Link: https://lore.kernel.org/r/20220427212748.9576-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
