Add the at76_usb wireless driver to the staging tree while the
other kernel driver (out of tree) gets rewritten to use the internal
wireless stack.
This patch comes directly from the Fedora kernel tree, with only the
directory placement of the files changed.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is needed as CONFIG_STAGING is set to y, yet there is no code in
drivers/staging/ to build, so the build-in.o doesn't get created
properly. Create a "dummy" module in drivers/staging called staging.c
to work around this bug.
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
slic_entry_probe() calls pci_request_regions() but there's no matching
pci_release_regions() at driver's exit or if slic_entry_probe() fails.
Signed-off-by: Lior Dotan <liodot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix the remaining variables that still had '_t' as a postfix and also
a couple of checkpatch warnings.
Signed-off-by: Lior Dotan <liodot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix a few warning messages that crept in due to conversion of all the
functions to static
Signed-off-by: Lior Dotan <liodot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix up some of the v4l issues that were recently changed to make the
go7007 driver a bit cleaner.
From: Ross Cohen <rcohen@snurgle.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix for compiler warning about format specifier in prints in
drivers/staging/sxg/sxg.c
Prints were using %x to print unsigned long data.
Signed-off-by: J.R. Mauro <jrm8005@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is used by mISDN and Zaptel drivers.
From: Steve Underwood <steveu@coppice.org>
From: David Rowe <david@rowetel.com>
Cc: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This adds the wlan-ng prism2 USB driver to the drivers/staging tree.
The code was originally written by the linux-wlan-ng team, patched by
some Novell engineers to properly work on newer kernels, and then hacked
into place in order to get it to build properly in a single subdirectory
within the kernel tree by me.
It supports a wide range of older USB prism2 devices, and contains a
80211 stack to support this single driver.
Cc: Christian Zoz <zoz@suse.de>
Cc: Andreas Gruenbacher <agruen@suse.de>
Cc: linux-wireless <linux-wireless@vger.kernel.org>
Cc: John Linville <linville@tuxdriver.com>
Cc: Helmut Schaa <helmut.schaa@googlemail.com>
Cc: linux-wlan-ng <solomon@linux-wlan.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is driver for w35und usb wifi -- also in kohjinsha
subnotebook. It should work well enough to associate and ping, but it
obviously needs to be rewritten two more times...
OTOH worst horrors (like embedded wifi stack) should have been fixed
already...
Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This adds the USB IP client driver
Brian Merrell cleaned up a lot of this code and submitted it for
inclusion. Greg also did a lot of cleanup.
Signed-off-by: Brian G. Merrell <bgmerrell@novell.com>
Cc: Takahiro Hirofuchi <hirofuchi@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This adds the USB IP client driver
Brian Merrell cleaned up a lot of this code and submitted it for
inclusion. Greg also did a lot of cleanup.
Signed-off-by: Brian G. Merrell <bgmerrell@novell.com>
Cc: Takahiro Hirofuchi <hirofuchi@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This adds the common functions needed by both the host and client side
of the USB/IP code.
Brian Merrell cleaned up a lot of this code and submitted it for
inclusion. Greg also did a lot of cleanup.
Signed-off-by: Brian G. Merrell <bgmerrell@novell.com>
Cc: Takahiro Hirofuchi <hirofuchi@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Todo:
- checkpatch.pl cleanups
- sparse cleanups
- lots of little modules, should be merged together
and added to the build.
- testing?
- handle churn in v4l layer.
Many thanks to Ross Cohen <rcohen@snurgle.org> for cleanup patches on
this driver.
Cc: Ross Cohen <rcohen@snurgle.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Originally written by Guenter Gebhardt <g.gebhardt@meilhaus.de>
TODO:
- checkpatch.pl cleanups
- sparse cleanups
- possible /proc interaction cleanups
- more info needed for Kconfig entry
- real device id?
- module parameter cleanup
Cc: Wolfgang Beiter <w.beiter@aon.at>
Cc: Guenter Gebhardt <g.gebhardt@meilhaus.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Originally written by Guenter Gebhardt <g.gebhardt@meilhaus.de>
TODO:
move this to the request_firmware() interface
Cc: Wolfgang Beiter <w.beiter@aon.at>
Cc: Guenter Gebhardt <g.gebhardt@meilhaus.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is the first rough cut at a driver for the Alacritech SLIC
Technology Non-Accelerated 10Gbe network driver
TODO:
- lindent the code
- remove typedefs
- remove wrappers
- checkpatch.pl cleanups
- new functionality that the card needs
Cc: Christopher Harrer <charrer@alacritech.com>
Cc: Michael Miles <mmiles@alacritech.com>
Cc: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This adds the Alacritech slicoss driver to the tree.
This driver is supposed to support:
Mojave cards (single port PCI Gigabit) both copper and fiber
Oasis cards (single and dual port PCI-x Gigabit) copper and fiber
Kalahari cards (dual and quad port PCI-e Gigabit) copper and fiber
The driver was acutally tested on Oasis and Kalahari cards.
TODO:
- move firmware loading to request_firmware()
- remove direct memory access of structures
- any remaining sparse and checkpatch.pl warnings
- any netdev recommended changes
Many thanks to Lior Dotan <liodot@gmail.com> for help with the cleanup
of this driver.
Cc: Lior Dotan <liodot@gmail.com>
Cc: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a driver for the ET1310 network device.
Based on the driver found at https://sourceforge.net/projects/et131x/
Cleaned up immensely by Olaf Hartman <o.hartmann@telovital.com> and Christoph
Hellwig <hch@infradead.org>
Note, the powermanagement options were removed from the vendor provided
driver as they did not build properly at the time.
TODO:
- kernel coding style cleanups
- forward port for latest network driver changes
- kill useless typecasts (e.g. in et1310_phy.c)
- alloc_etherdev is initializing memory with zero?!?
- add_timer call in et131x_netdev.c is correct?
- Add power saving functionality (suspend, sleep, resume)
- Implement a few more kernel Parameter (set mac )
Cc: Olaf Hartmann <o.hartmann@telovital.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dean Adams <dadams1969@gmail.com>
Cc: Victor Soriano <vjsoriano@agere.com>
Cc: Andre-Sebastian Liebe <andre@lianse.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
