Commit Graph

3547 Commits

Author SHA1 Message Date
Takeshi Kihara
5080947048 arm64: dts: r8a7796: Add pinctrl device node
This patch adds pinctrl device node for R8A7796 SoC.

Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-09-08 09:35:26 +02:00
Laurent Pinchart
272bde0384 arm64: dts: r8a7795: salvator-x: Configure pins for the DU RGB output
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-09-08 09:35:25 +02:00
Vladimir Barinov
e8c841f5ac arm64: dts: h3ulcb: enable GPIO leds
This supports GPIO leds on H3ULCB board

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-09-08 09:35:25 +02:00
Vladimir Barinov
2627d5179f arm64: dts: h3ulcb: Sound SSI support
This supports SSI sound for H3ULCB board.
SSI DMA mode used. CS2000 used as AUDIO_CLK_B.

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-09-08 09:35:24 +02:00
Vladimir Barinov
5709436319 arm64: dts: h3ulcb: enable SDHI0
This supports SDHI0 on H3ULCB board SD card slot

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-09-08 09:35:18 +02:00
Vladimir Barinov
0e3886a981 arm64: dts: h3ulcb: enable GPIO keys
This supports GPIO keys on H3ULCB board

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-09-08 09:35:17 +02:00
Simon Horman
56de959f53 arm64: dts: r8a7795: remove unnecessary cap-mmc-highspeed property
Remove cap-mmc-highspeed property from SDHI2 and SDHI3.

This property is unnecessary as the driver automatically sets
the highspeed capability. Furthermore its use is inconsistent with SDHI0
and SDHI1 which are also highspeed capable but do not have this property
present.

Found by inspection.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-09-08 09:35:16 +02:00
Vladimir Barinov
15907f1f87 arm64: dts: h3ulcb: enable USB2.0 Host channel 1
This supports USB2.0 Host channel 1 on H3ULCB board

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-09-08 09:35:06 +02:00
Vladimir Barinov
0baa64d8d2 arm64: dts: h3ulcb: enable USB2 PHY of channel 1
This supports USB2 PHY channel #1 on H3ULCB board

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-09-06 12:57:28 +02:00
Vladimir Barinov
4bdb25d0f1 arm64: dts: h3ulcb: enable WDT
This supports watchdog timer for H3ULCB board

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-09-06 12:57:27 +02:00
Vladimir Barinov
b00d23f71f arm64: dts: h3ulcb: enable EXTALR clk
This enables EXTALR clock that can be used for the watchdog.

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-09-06 12:57:26 +02:00
Vladimir Barinov
eb3f0f199f arm64: dts: h3ulcb: enable I2C2
This supports I2C2 bus on H3ULCB board

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-09-06 12:57:26 +02:00
Vladimir Barinov
144bf6ccb1 arm64: dts: h3ulcb: enable EthernetAVB
This supports Ethernet AVB on H3ULCB board

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-09-06 12:57:25 +02:00
Vladimir Barinov
af111bce54 arm64: dts: h3ulcb: enable SCIF clk and pins
This enables the external crystal for the SCIF_CLK and its pinctrl, to
be used by the Baud Rate Generator for External Clock (BRG) on (H)SCIF.

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-09-06 12:57:24 +02:00
Vladimir Barinov
b10690d11f arm64: dts: h3ulcb: initial device tree
Add the initial device tree for the R8A7795 SoC based H3ULCB low cost
board.

This commit supports the following peripherals:
- SCIF (console)

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-09-06 12:57:24 +02:00
Geert Uytterhoeven
f826473520 arm64: dts: r8a7795: Add SoC-specific compatible property to audio-dmac nodes
The audio-dmac nodes used the generic compatible property only.
Add the SoC-specific one, to make it future proof.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-09-06 12:57:23 +02:00
Laurent Pinchart
aadc4ee00a arm64: dts: r8a7795: renesas: salvator-x: Enable DU
Only the VGA output is supported for now.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-09-06 12:57:11 +02:00
Laurent Pinchart
a001a07fe8 arm64: dts: renesas: r8a7795: Add DU device to DT
Add the DU device to r8a7795.dtsi in a disabled state.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-09-06 12:57:10 +02:00
Laurent Pinchart
9f8573e38a arm64: dts: renesas: r8a7795: Add VSP instances
The r8a7795 has 9 VSP instances.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-09-06 12:57:10 +02:00
Laurent Pinchart
52cd078325 arm64: dts: renesas: r8a7795: Add FCPV nodes
The FCPs handle the interface between various IP cores and memory. Add
the instances related to the VSP2s.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-09-06 12:57:09 +02:00
Yoshihiro Shimoda
0b4dca78f0 arm64: dts: r8a7795: salvator-x: enable HSUSB
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-09-06 12:56:55 +02:00
Yoshihiro Shimoda
34ccd788a3 arm64: dts: r8a7795: salvator-x: enable USB 2.0 Host channel 0
We have to set SW15 to pin 2-3 side on the board before we use CN9
as USB host or peripheral.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-09-06 12:56:45 +02:00
Yoshihiro Shimoda
a905b72ce9 arm64: dts: r8a7795: salvator-x: enable usb2_phy of channel 0
This patch also adds a regulator node for USB2.0 to handle VBUS on/off
by the phy-rcar-gen3-usb2 driver.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-09-06 12:56:34 +02:00
Yoshihiro Shimoda
d2422e1088 arm64: dts: r8a7795: Add HSUSB device node
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-09-06 12:26:27 +02:00
Wolfram Sang
dcdca4d538 arm64: dts: r8a7795: set maximum frequency for SDHI clocks
Define the upper limit otherwise the driver cannot utilize max speeds.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-09-06 12:26:27 +02:00
Kieran Bingham
bfb3145934 arm64: dts: r8a7795: add FDP1 device nodes
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran@bingham.xyz>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-09-06 12:26:26 +02:00
Kieran Bingham
28fc813153 arm64: dts: r8a7795: add FCPF device nodes
Provide nodes for the FCP devices dedicated to the FDP device channels.

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Kieran Bingham <kieran@bingham.xyz>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-09-06 12:26:26 +02:00
Linus Torvalds
80fac0f577 * ARM bugfix and MSI injection support
* x86 nested virt tweak and OOPS fix
 * Simplify pvclock code (vdso bits acked by Andy Lutomirski).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJXpKOnAAoJEL/70l94x66D5z4H/R2660Vy3brQrI8lGxCtkXJt
 AVe8PwI8nDfYJ/UkMZ2KcHPSvy+sHW2ydaZXYNqXHVBeTaUxiPW9rTgK61ebypGL
 1tPOgJ3kGZF6XEdAz6gS8LniNFc+D3W6Y6sRylkEsqPj39/hxe7QMoOMSCQ9imbW
 WMIx7/81i1EMw6oi+9FVtq+yHCpvyfFnD8t1TDsYWOReVn1J15SxbEs4Ih+hBMLz
 HZ5DEjp9cAmzeR7GLje5eH1t6TEEoNb1MNgFWuscoAsDf8D9DKqRB9s0hC+TLFYn
 oZbGSqjQwu3/VMblgedinH6X9MTm8V0zW29ToGnDcoO00AUmdlNmXSaZUhvT/Rs=
 =H5cD
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull more KVM updates from Paolo Bonzini:
 - ARM bugfix and MSI injection support
 - x86 nested virt tweak and OOPS fix
 - Simplify pvclock code (vdso bits acked by Andy Lutomirski).

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  nvmx: mark ept single context invalidation as supported
  nvmx: remove comment about missing nested vpid support
  KVM: lapic: fix access preemption timer stuff even if kernel_irqchip=off
  KVM: documentation: fix KVM_CAP_X2APIC_API information
  x86: vdso: use __pvclock_read_cycles
  pvclock: introduce seqcount-like API
  arm64: KVM: Set cpsr before spsr on fault injection
  KVM: arm: vgic-irqfd: Workaround changing kvm_set_routing_entry prototype
  KVM: arm/arm64: Enable MSI routing
  KVM: arm/arm64: Enable irqchip routing
  KVM: Move kvm_setup_default/empty_irq_routing declaration in arch specific header
  KVM: irqchip: Convey devid to kvm_set_msi
  KVM: Add devid in kvm_kernel_irq_routing_entry
  KVM: api: Pass the devid in the msi routing entry
2016-08-06 09:18:21 -04:00
Linus Torvalds
194d6ad32e arm64 fixes:
- Fix HugeTLB leak due to CoW and PTE_RDONLY mismatch
 - Avoid accessing unmapped FDT fields when checking validity
 - Correctly account for vDSO AUX entry in ARCH_DLINFO
 - Fix kallsyms with absolute expressions in linker script
 - Kill unnecessary symbol-based relocs in vmlinux
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABCgAGBQJXpFZ5AAoJELescNyEwWM0PI4IALsTuHRzClOSMDLiqMUj8t+5
 WNAcqybxAjCOVxAHckhweju++TeJBxcRH1nvBoNwiHIdHTv4fq1TZ3PeEq9kWMg5
 JbKjYjvd9dW8k6LXMya8iXCYtG3kzbNejkNpOTVebC86yvas1IiEjNb/ztPdhJeM
 HBSOkhfk8RcskfNxhuscZzGXbbdH9/R+XSTNRHN/RwCZH8PlInmduD9BbMvDhZyP
 NLFonD2IgQ4as1kYG/HdIcw0BamHiURjd043+gyoqMvm7JjPksRzlQnr91SMkX17
 LykXjHYPi2Me3aTrZ1NtkUNd5FHLHZ6/b9Wg6nA19d5KWkd3ER9uSJqGxkkbnt0=
 =dtGK
 -----END PGP SIGNATURE-----

Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 fixes from Will Deacon:

 - fix HugeTLB leak due to CoW and PTE_RDONLY mismatch

 - avoid accessing unmapped FDT fields when checking validity

 - correctly account for vDSO AUX entry in ARCH_DLINFO

 - fix kallsyms with absolute expressions in linker script

 - kill unnecessary symbol-based relocs in vmlinux

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: Fix copy-on-write referencing in HugeTLB
  arm64: mm: avoid fdt_check_header() before the FDT is fully mapped
  arm64: Define AT_VECTOR_SIZE_ARCH for ARCH_DLINFO
  arm64: relocatable: suppress R_AARCH64_ABS64 relocations in vmlinux
  arm64: vmlinux.lds: make __rela_offset and __dynsym_offset ABSOLUTE
2016-08-06 08:58:59 -04:00
Krzysztof Kozlowski
00085f1efa dma-mapping: use unsigned long for dma_attrs
The dma-mapping core and the implementations do not change the DMA
attributes passed by pointer.  Thus the pointer can point to const data.
However the attributes do not have to be a bitfield.  Instead unsigned
long will do fine:

1. This is just simpler.  Both in terms of reading the code and setting
   attributes.  Instead of initializing local attributes on the stack
   and passing pointer to it to dma_set_attr(), just set the bits.

2. It brings safeness and checking for const correctness because the
   attributes are passed by value.

Semantic patches for this change (at least most of them):

    virtual patch
    virtual context

    @r@
    identifier f, attrs;

    @@
    f(...,
    - struct dma_attrs *attrs
    + unsigned long attrs
    , ...)
    {
    ...
    }

    @@
    identifier r.f;
    @@
    f(...,
    - NULL
    + 0
     )

and

    // Options: --all-includes
    virtual patch
    virtual context

    @r@
    identifier f, attrs;
    type t;

    @@
    t f(..., struct dma_attrs *attrs);

    @@
    identifier r.f;
    @@
    f(...,
    - NULL
    + 0
     )

Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.com
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no>
Acked-by: Mark Salter <msalter@redhat.com> [c6x]
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> [cris]
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> [drm]
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Acked-by: Joerg Roedel <jroedel@suse.de> [iommu]
Acked-by: Fabien Dessenne <fabien.dessenne@st.com> [bdisp]
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> [vb2-core]
Acked-by: David Vrabel <david.vrabel@citrix.com> [xen]
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [xen swiotlb]
Acked-by: Joerg Roedel <jroedel@suse.de> [iommu]
Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon]
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390]
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> [avr32]
Acked-by: Vineet Gupta <vgupta@synopsys.com> [arc]
Acked-by: Robin Murphy <robin.murphy@arm.com> [arm64 and dma-iommu]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-04 08:50:07 -04:00
Steve Capper
747a70e60b arm64: Fix copy-on-write referencing in HugeTLB
set_pte_at(.) will set or unset the PTE_RDONLY hardware bit before
writing the entry to the table.

This can cause problems with the copy-on-write logic in hugetlb_cow:
 *) hugetlb_cow(.) called to handle a write fault on read only pte,
 *) Before the copy-on-write updates the new page table a call is
    made to pte_same(huge_ptep_get(ptep), pte)), to check for a race,
 *) Because set_pte_at(.) changed the pte, *ptep != pte, and the
    hugetlb_cow(.) code erroneously assumes that it lost the race,
 *) The new page is subsequently freed without being used.

On arm64 this problem only becomes apparent when we apply:
67961f9 mm/hugetlb: fix huge page reserve accounting for private
mappings

When one runs the libhugetlbfs test suite, there are allocation errors
and hugetlbfs pages become erroneously locked in memory as reserved.
(There is a high HugePages_Rsvd: count).

In this patch we introduce pte_same which ignores the PTE_RDONLY bit,
allowing for the libhugetlbfs test suite to pass as expected and
without leaking any reserved HugeTLB pages.

Reported-by: Huang Shijie <shijie.huang@arm.com>
Signed-off-by: Steve Capper <steve.capper@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-08-04 13:41:18 +01:00
Paolo Bonzini
6f49b2f341 KVM/ARM Changes for v4.8 - Take 2
Includes GSI routing support to go along with the new VGIC and a small fix that
 has been cooking in -next for a while.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJXoydqAAoJEEtpOizt6ddyM3oH/1A4VeG/J9q4fBPXqY2tVWXs
 c3P7UgNcrEgUNs/F9ykQY/lb31deecUzaBt1OyTf+RlsNbihq3dQdYcBhxtUODw/
 Faok582ya3UFgLW+IRHcID0EbkVOpIzMhOStYsnU/Dz7HG1JL9HdPzwkid7iu9LT
 fI6yrrBnJFjdWAAQ4BkcEKBENRsY8NTs7jX5vnFA92MkUBby7BmariPDD3FtrB+f
 Ob9B7CxM30pNqsN7OA/QvFOHMJHxf3s1TBKwmPHe5TLIfSzV1YxcEGiMc0lWqF4v
 BT8ZeMGCtjDw94tND1DskfQQRPaMqPmGuRTrAW/IuE2n92bFtbqIqs7Cbw0fzLE=
 =Vm6Q
 -----END PGP SIGNATURE-----

Merge tag 'kvm-arm-for-4.8-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/ARM Changes for v4.8 - Take 2

Includes GSI routing support to go along with the new VGIC and a small fix that
has been cooking in -next for a while.
2016-08-04 13:59:56 +02:00
Linus Torvalds
c8d0267efd PCI changes for the v4.8 merge window:
Enumeration
     Move ecam.h to linux/include/pci-ecam.h (Jayachandran C)
     Add parent device field to ECAM struct pci_config_window (Jayachandran C)
     Add generic MCFG table handling (Tomasz Nowicki)
     Refactor pci_bus_assign_domain_nr() for CONFIG_PCI_DOMAINS_GENERIC (Tomasz Nowicki)
     Factor DT-specific pci_bus_find_domain_nr() code out (Tomasz Nowicki)
 
   Resource management
     Add devm_request_pci_bus_resources() (Bjorn Helgaas)
     Unify pci_resource_to_user() declarations (Bjorn Helgaas)
     Implement pci_resource_to_user() with pcibios_resource_to_bus() (microblaze, powerpc, sparc) (Bjorn Helgaas)
     Request host bridge window resources (designware, iproc, rcar, xgene, xilinx, xilinx-nwl) (Bjorn Helgaas)
     Make PCI I/O space optional on ARM32 (Bjorn Helgaas)
     Ignore write combining when mapping I/O port space (Bjorn Helgaas)
     Claim bus resources on MIPS PCI_PROBE_ONLY set-ups (Bjorn Helgaas)
     Remove unicore32 pci=firmware command line parameter handling (Bjorn Helgaas)
     Support I/O resources when parsing host bridge resources (Jayachandran C)
     Add helpers to request/release memory and I/O regions (Johannes Thumshirn)
     Use pci_(request|release)_mem_regions (NVMe, lpfc, GenWQE, ethernet/intel, alx) (Johannes Thumshirn)
     Extend pci=resource_alignment to specify device/vendor IDs (Koehrer Mathias (ETAS/ESW5))
     Add generic pci_bus_claim_resources() (Lorenzo Pieralisi)
     Claim bus resources on ARM32 PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi)
     Remove ARM32 and ARM64 arch-specific pcibios_enable_device() (Lorenzo Pieralisi)
     Add pci_unmap_iospace() to unmap I/O resources (Sinan Kaya)
     Remove powerpc __pci_mmap_set_pgprot() (Yinghai Lu)
 
   PCI device hotplug
     Allow additional bus numbers for hotplug bridges (Keith Busch)
     Ignore interrupts during D3cold (Lukas Wunner)
 
   Power management
     Enforce type casting for pci_power_t (Andy Shevchenko)
     Don't clear d3cold_allowed for PCIe ports (Mika Westerberg)
     Put PCIe ports into D3 during suspend (Mika Westerberg)
     Power on bridges before scanning new devices (Mika Westerberg)
     Runtime resume bridge before rescan (Mika Westerberg)
     Add runtime PM support for PCIe ports (Mika Westerberg)
     Remove redundant check of pcie_set_clkpm (Shawn Lin)
 
   Virtualization
     Add function 1 DMA alias quirk for Marvell 88SE9182 (Aaron Sierra)
     Add DMA alias quirk for Adaptec 3805 (Alex Williamson)
     Mark Atheros AR9485 and QCA9882 to avoid bus reset (Chris Blake)
     Add ACS quirk for Solarflare SFC9220 (Edward Cree)
 
   MSI
     Fix PCI_MSI dependencies (Arnd Bergmann)
     Add pci_msix_desc_addr() helper (Christoph Hellwig)
     Switch msix_program_entries() to use pci_msix_desc_addr() (Christoph Hellwig)
     Make the "entries" argument to pci_enable_msix() optional (Christoph Hellwig)
     Provide sensible IRQ vector alloc/free routines (Christoph Hellwig)
     Spread interrupt vectors in pci_alloc_irq_vectors() (Christoph Hellwig)
 
   Error Handling
     Bind DPC to Root Ports as well as Downstream Ports (Keith Busch)
     Remove DPC tristate module option (Keith Busch)
     Convert Downstream Port Containment driver to use devm_* functions (Mika Westerberg)
 
   Generic host bridge driver
     Select IRQ_DOMAIN (Arnd Bergmann)
     Claim bus resources on PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi)
 
   ACPI host bridge driver
     Add ARM64 acpi_pci_bus_find_domain_nr() (Tomasz Nowicki)
     Add ARM64 ACPI support for legacy IRQs parsing and consolidation with DT code (Tomasz Nowicki)
     Implement ARM64 AML accessors for PCI_Config region (Tomasz Nowicki)
     Support ARM64 ACPI-based PCI host controller (Tomasz Nowicki)
 
   Altera host bridge driver
     Check link status before retrain link (Ley Foon Tan)
     Poll for link up status after retraining the link (Ley Foon Tan)
 
   Axis ARTPEC-6 host bridge driver
     Add PCI_MSI_IRQ_DOMAIN dependency (Arnd Bergmann)
     Add DT binding for Axis ARTPEC-6 PCIe controller (Niklas Cassel)
     Add Axis ARTPEC-6 PCIe controller driver (Niklas Cassel)
 
   Intel VMD host bridge driver
     Use lock save/restore in interrupt enable path (Jon Derrick)
     Select device dma ops to override (Keith Busch)
     Initialize list item in IRQ disable (Keith Busch)
     Use x86_vector_domain as parent domain (Keith Busch)
     Separate MSI and MSI-X vector sharing (Keith Busch)
 
   Marvell Aardvark host bridge driver
     Add DT binding for the Aardvark PCIe controller (Thomas Petazzoni)
     Add Aardvark PCI host controller driver (Thomas Petazzoni)
     Add Aardvark PCIe support for Armada 3700 (Thomas Petazzoni)
 
   Microsoft Hyper-V host bridge driver
     Fix interrupt cleanup path (Cathy Avery)
     Don't leak buffer in hv_pci_onchannelcallback() (Vitaly Kuznetsov)
     Handle all pending messages in hv_pci_onchannelcallback() (Vitaly Kuznetsov)
 
   NVIDIA Tegra host bridge driver
     Program PADS_REFCLK_CFG* always, not just on legacy SoCs (Stephen Warren)
     Program PADS_REFCLK_CFG* registers with per-SoC values (Stephen Warren)
     Use lower-case hex consistently for register definitions (Thierry Reding)
     Use generic pci_remap_iospace() rather than ARM32-specific one (Thierry Reding)
     Stop setting pcibios_min_mem (Thierry Reding)
 
   Renesas R-Car host bridge driver
     Drop gen2 dummy I/O port region (Bjorn Helgaas)
 
   TI DRA7xx host bridge driver
     Fix return value in case of error (Christophe JAILLET)
 
   Xilinx AXI host bridge driver
     Fix return value in case of error (Christophe JAILLET)
 
   Miscellaneous
     Make bus_attr_resource_alignment static (Ben Dooks)
     Include <asm/dma.h> for isa_dma_bridge_buggy (Ben Dooks)
     MAINTAINERS: Add file patterns for PCI device tree bindings (Geert Uytterhoeven)
     Make host bridge drivers explicitly non-modular (Paul Gortmaker)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXoNRtAAoJEFmIoMA60/r8LMkP/3kiNh21QFS6RZGOaDft5/Py
 n14Zo0w51avspxoI3iyDlBd5q/SssMqi+2c6Ko/fh2D2xMxJgmQOjdMDrIGARxGA
 qEHk/5IoXquY2/GcptmCk3ap66cJ6kTovS4OPrb73m3fPuknFwFwdzExq22XHbnI
 crPya6xwQxPLc54VpY/TsgW8E+EKZd/3FW9wuzzNHXrXmTILyhBQzQAA0K470GMx
 wEXU6kc3M/XhRuF1zjV9/O+H/xguwfnbTpZLvd2NAF6uXKZoRytEHHtNnVqu1hoe
 UPpDS2xq32pMNbGxGqBetCdIbkY/hWOufmckHI7Yu2OfXBYyHBYMG2je1+nMPkOV
 WiFhhrchGt5KnEMUwXPS4ROqnSZVpZBl1Fd4s10GhUYkoE2HNKJXta398H9FR1jj
 4NEVSi4mSX/+CkaoIN3lXYiaf9P0wv4Wppve4Scr30+VnLjJhm7Vw5La7v12oo6x
 otrJ/g98AkmnbuUdLeWBUS/+TOcdPjZYbw52rqBsbOOjFm51Zcj6D7kf5WcTypQy
 HzbvygSVabcioWehUG1uudC8pdJmQlUGx1aES/iu+mZEae4cuUFALu6hDBD9IYnZ
 5JdwjVzI0UItEwT3rQt3t4xiAqHADQ0NAVNJVCeREdoy/YQpSoTWGXIpyqCZ1yCm
 aBykjRsxbKQXlhVeIxuc
 =NVxu
 -----END PGP SIGNATURE-----

Merge tag 'pci-v4.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "Highlights:

   - ARM64 support for ACPI host bridges

   - new drivers for Axis ARTPEC-6 and Marvell Aardvark

   - new pci_alloc_irq_vectors() interface for MSI-X, MSI, legacy INTx

   - pci_resource_to_user() cleanup (more to come)

  Detailed summary:

  Enumeration:
   - Move ecam.h to linux/include/pci-ecam.h (Jayachandran C)
   - Add parent device field to ECAM struct pci_config_window (Jayachandran C)
   - Add generic MCFG table handling (Tomasz Nowicki)
   - Refactor pci_bus_assign_domain_nr() for CONFIG_PCI_DOMAINS_GENERIC (Tomasz Nowicki)
   - Factor DT-specific pci_bus_find_domain_nr() code out (Tomasz Nowicki)

  Resource management:
   - Add devm_request_pci_bus_resources() (Bjorn Helgaas)
   - Unify pci_resource_to_user() declarations (Bjorn Helgaas)
   - Implement pci_resource_to_user() with pcibios_resource_to_bus() (microblaze, powerpc, sparc) (Bjorn Helgaas)
   - Request host bridge window resources (designware, iproc, rcar, xgene, xilinx, xilinx-nwl) (Bjorn Helgaas)
   - Make PCI I/O space optional on ARM32 (Bjorn Helgaas)
   - Ignore write combining when mapping I/O port space (Bjorn Helgaas)
   - Claim bus resources on MIPS PCI_PROBE_ONLY set-ups (Bjorn Helgaas)
   - Remove unicore32 pci=firmware command line parameter handling (Bjorn Helgaas)
   - Support I/O resources when parsing host bridge resources (Jayachandran C)
   - Add helpers to request/release memory and I/O regions (Johannes Thumshirn)
   - Use pci_(request|release)_mem_regions (NVMe, lpfc, GenWQE, ethernet/intel, alx) (Johannes Thumshirn)
   - Extend pci=resource_alignment to specify device/vendor IDs (Koehrer Mathias (ETAS/ESW5))
   - Add generic pci_bus_claim_resources() (Lorenzo Pieralisi)
   - Claim bus resources on ARM32 PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi)
   - Remove ARM32 and ARM64 arch-specific pcibios_enable_device() (Lorenzo Pieralisi)
   - Add pci_unmap_iospace() to unmap I/O resources (Sinan Kaya)
   - Remove powerpc __pci_mmap_set_pgprot() (Yinghai Lu)

  PCI device hotplug:
   - Allow additional bus numbers for hotplug bridges (Keith Busch)
   - Ignore interrupts during D3cold (Lukas Wunner)

  Power management:
   - Enforce type casting for pci_power_t (Andy Shevchenko)
   - Don't clear d3cold_allowed for PCIe ports (Mika Westerberg)
   - Put PCIe ports into D3 during suspend (Mika Westerberg)
   - Power on bridges before scanning new devices (Mika Westerberg)
   - Runtime resume bridge before rescan (Mika Westerberg)
   - Add runtime PM support for PCIe ports (Mika Westerberg)
   - Remove redundant check of pcie_set_clkpm (Shawn Lin)

  Virtualization:
   - Add function 1 DMA alias quirk for Marvell 88SE9182 (Aaron Sierra)
   - Add DMA alias quirk for Adaptec 3805 (Alex Williamson)
   - Mark Atheros AR9485 and QCA9882 to avoid bus reset (Chris Blake)
   - Add ACS quirk for Solarflare SFC9220 (Edward Cree)

  MSI:
   - Fix PCI_MSI dependencies (Arnd Bergmann)
   - Add pci_msix_desc_addr() helper (Christoph Hellwig)
   - Switch msix_program_entries() to use pci_msix_desc_addr() (Christoph Hellwig)
   - Make the "entries" argument to pci_enable_msix() optional (Christoph Hellwig)
   - Provide sensible IRQ vector alloc/free routines (Christoph Hellwig)
   - Spread interrupt vectors in pci_alloc_irq_vectors() (Christoph Hellwig)

  Error Handling:
   - Bind DPC to Root Ports as well as Downstream Ports (Keith Busch)
   - Remove DPC tristate module option (Keith Busch)
   - Convert Downstream Port Containment driver to use devm_* functions (Mika Westerberg)

  Generic host bridge driver:
   - Select IRQ_DOMAIN (Arnd Bergmann)
   - Claim bus resources on PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi)

  ACPI host bridge driver:
   - Add ARM64 acpi_pci_bus_find_domain_nr() (Tomasz Nowicki)
   - Add ARM64 ACPI support for legacy IRQs parsing and consolidation with DT code (Tomasz Nowicki)
   - Implement ARM64 AML accessors for PCI_Config region (Tomasz Nowicki)
   - Support ARM64 ACPI-based PCI host controller (Tomasz Nowicki)

  Altera host bridge driver:
   - Check link status before retrain link (Ley Foon Tan)
   - Poll for link up status after retraining the link (Ley Foon Tan)

  Axis ARTPEC-6 host bridge driver:
   - Add PCI_MSI_IRQ_DOMAIN dependency (Arnd Bergmann)
   - Add DT binding for Axis ARTPEC-6 PCIe controller (Niklas Cassel)
   - Add Axis ARTPEC-6 PCIe controller driver (Niklas Cassel)

  Intel VMD host bridge driver:
   - Use lock save/restore in interrupt enable path (Jon Derrick)
   - Select device dma ops to override (Keith Busch)
   - Initialize list item in IRQ disable (Keith Busch)
   - Use x86_vector_domain as parent domain (Keith Busch)
   - Separate MSI and MSI-X vector sharing (Keith Busch)

  Marvell Aardvark host bridge driver:
   - Add DT binding for the Aardvark PCIe controller (Thomas Petazzoni)
   - Add Aardvark PCI host controller driver (Thomas Petazzoni)
   - Add Aardvark PCIe support for Armada 3700 (Thomas Petazzoni)

  Microsoft Hyper-V host bridge driver:
   - Fix interrupt cleanup path (Cathy Avery)
   - Don't leak buffer in hv_pci_onchannelcallback() (Vitaly Kuznetsov)
   - Handle all pending messages in hv_pci_onchannelcallback() (Vitaly Kuznetsov)

  NVIDIA Tegra host bridge driver:
   - Program PADS_REFCLK_CFG* always, not just on legacy SoCs (Stephen Warren)
   - Program PADS_REFCLK_CFG* registers with per-SoC values (Stephen Warren)
   - Use lower-case hex consistently for register definitions (Thierry Reding)
   - Use generic pci_remap_iospace() rather than ARM32-specific one (Thierry Reding)
   - Stop setting pcibios_min_mem (Thierry Reding)

  Renesas R-Car host bridge driver:
   - Drop gen2 dummy I/O port region (Bjorn Helgaas)

  TI DRA7xx host bridge driver:
   - Fix return value in case of error (Christophe JAILLET)

  Xilinx AXI host bridge driver:
   - Fix return value in case of error (Christophe JAILLET)

  Miscellaneous:
   - Make bus_attr_resource_alignment static (Ben Dooks)
   - Include <asm/dma.h> for isa_dma_bridge_buggy (Ben Dooks)
   - MAINTAINERS: Add file patterns for PCI device tree bindings (Geert Uytterhoeven)
   - Make host bridge drivers explicitly non-modular (Paul Gortmaker)"

* tag 'pci-v4.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (125 commits)
  PCI: xgene: Make explicitly non-modular
  PCI: thunder-pem: Make explicitly non-modular
  PCI: thunder-ecam: Make explicitly non-modular
  PCI: tegra: Make explicitly non-modular
  PCI: rcar-gen2: Make explicitly non-modular
  PCI: rcar: Make explicitly non-modular
  PCI: mvebu: Make explicitly non-modular
  PCI: layerscape: Make explicitly non-modular
  PCI: keystone: Make explicitly non-modular
  PCI: hisi: Make explicitly non-modular
  PCI: generic: Make explicitly non-modular
  PCI: designware-plat: Make it explicitly non-modular
  PCI: artpec6: Make explicitly non-modular
  PCI: armada8k: Make explicitly non-modular
  PCI: artpec: Add PCI_MSI_IRQ_DOMAIN dependency
  PCI: Add ACS quirk for Solarflare SFC9220
  arm64: dts: marvell: Add Aardvark PCIe support for Armada 3700
  PCI: aardvark: Add Aardvark PCI host controller driver
  dt-bindings: add DT binding for the Aardvark PCIe controller
  PCI: tegra: Program PADS_REFCLK_CFG* registers with per-SoC values
  ...
2016-08-02 17:12:29 -04:00
Linus Torvalds
f716a85cd6 Merge branch 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kbuild updates from Michal Marek:

 - GCC plugin support by Emese Revfy from grsecurity, with a fixup from
   Kees Cook.  The plugins are meant to be used for static analysis of
   the kernel code.  Two plugins are provided already.

 - reduction of the gcc commandline by Arnd Bergmann.

 - IS_ENABLED / IS_REACHABLE macro enhancements by Masahiro Yamada

 - bin2c fix by Michael Tautschnig

 - setlocalversion fix by Wolfram Sang

* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  gcc-plugins: disable under COMPILE_TEST
  kbuild: Abort build on bad stack protector flag
  scripts: Fix size mismatch of kexec_purgatory_size
  kbuild: make samples depend on headers_install
  Kbuild: don't add obj tree in additional includes
  Kbuild: arch: look for generated headers in obtree
  Kbuild: always prefix objtree in LINUXINCLUDE
  Kbuild: avoid duplicate include path
  Kbuild: don't add ../../ to include path
  vmlinux.lds.h: replace config_enabled() with IS_ENABLED()
  kconfig.h: allow to use IS_{ENABLE,REACHABLE} in macro expansion
  kconfig.h: use already defined macros for IS_REACHABLE() define
  export.h: use __is_defined() to check if __KSYM_* is defined
  kconfig.h: use __is_defined() to check if MODULE is defined
  kbuild: setlocalversion: print error to STDERR
  Add sancov plugin
  Add Cyclomatic complexity GCC plugin
  GCC plugin infrastructure
  Shared library support
2016-08-02 16:37:12 -04:00
Linus Torvalds
221bb8a46e - ARM: GICv3 ITS emulation and various fixes. Removal of the old
VGIC implementation.
 
 - s390: support for trapping software breakpoints, nested virtualization
 (vSIE), the STHYI opcode, initial extensions for CPU model support.
 
 - MIPS: support for MIPS64 hosts (32-bit guests only) and lots of cleanups,
 preliminary to this and the upcoming support for hardware virtualization
 extensions.
 
 - x86: support for execute-only mappings in nested EPT; reduced vmexit
 latency for TSC deadline timer (by about 30%) on Intel hosts; support for
 more than 255 vCPUs.
 
 - PPC: bugfixes.
 
 The ugly bit is the conflicts.  A couple of them are simple conflicts due
 to 4.7 fixes, but most of them are with other trees. There was definitely
 too much reliance on Acked-by here.  Some conflicts are for KVM patches
 where _I_ gave my Acked-by, but the worst are for this pull request's
 patches that touch files outside arch/*/kvm.  KVM submaintainers should
 probably learn to synchronize better with arch maintainers, with the
 latter providing topic branches whenever possible instead of Acked-by.
 This is what we do with arch/x86.  And I should learn to refuse pull
 requests when linux-next sends scary signals, even if that means that
 submaintainers have to rebase their branches.
 
 Anyhow, here's the list:
 
 - arch/x86/kvm/vmx.c: handle_pcommit and EXIT_REASON_PCOMMIT was removed
 by the nvdimm tree.  This tree adds handle_preemption_timer and
 EXIT_REASON_PREEMPTION_TIMER at the same place.  In general all mentions
 of pcommit have to go.
 
 There is also a conflict between a stable fix and this patch, where the
 stable fix removed the vmx_create_pml_buffer function and its call.
 
 - virt/kvm/kvm_main.c: kvm_cpu_notifier was removed by the hotplug tree.
 This tree adds kvm_io_bus_get_dev at the same place.
 
 - virt/kvm/arm/vgic.c: a few final bugfixes went into 4.7 before the
 file was completely removed for 4.8.
 
 - include/linux/irqchip/arm-gic-v3.h: this one is entirely our fault;
 this is a change that should have gone in through the irqchip tree and
 pulled by kvm-arm.  I think I would have rejected this kvm-arm pull
 request.  The KVM version is the right one, except that it lacks
 GITS_BASER_PAGES_SHIFT.
 
 - arch/powerpc: what a mess.  For the idle_book3s.S conflict, the KVM
 tree is the right one; everything else is trivial.  In this case I am
 not quite sure what went wrong.  The commit that is causing the mess
 (fd7bacbca4, "KVM: PPC: Book3S HV: Fix TB corruption in guest exit
 path on HMI interrupt", 2016-05-15) touches both arch/powerpc/kernel/
 and arch/powerpc/kvm/.  It's large, but at 396 insertions/5 deletions
 I guessed that it wasn't really possible to split it and that the 5
 deletions wouldn't conflict.  That wasn't the case.
 
 - arch/s390: also messy.  First is hypfs_diag.c where the KVM tree
 moved some code and the s390 tree patched it.  You have to reapply the
 relevant part of commits 6c22c98637, plus all of e030c1125e, to
 arch/s390/kernel/diag.c.  Or pick the linux-next conflict
 resolution from http://marc.info/?l=kvm&m=146717549531603&w=2.
 Second, there is a conflict in gmap.c between a stable fix and 4.8.
 The KVM version here is the correct one.
 
 I have pushed my resolution at refs/heads/merge-20160802 (commit
 3d1f53419842) at git://git.kernel.org/pub/scm/virt/kvm/kvm.git.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJXoGm7AAoJEL/70l94x66DugQIAIj703ePAFepB/fCrKHkZZia
 SGrsBdvAtNsOhr7FQ5qvvjLxiv/cv7CymeuJivX8H+4kuUHUllDzey+RPHYHD9X7
 U6n1PdCH9F15a3IXc8tDjlDdOMNIKJixYuq1UyNZMU6NFwl00+TZf9JF8A2US65b
 x/41W98ilL6nNBAsoDVmCLtPNWAqQ3lajaZELGfcqRQ9ZGKcAYOaLFXHv2YHf2XC
 qIDMf+slBGSQ66UoATnYV2gAopNlWbZ7n0vO6tE2KyvhHZ1m399aBX1+k8la/0JI
 69r+Tz7ZHUSFtmlmyByi5IAB87myy2WQHyAPwj+4vwJkDGPcl0TrupzbG7+T05Y=
 =42ti
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM updates from Paolo Bonzini:

 - ARM: GICv3 ITS emulation and various fixes.  Removal of the
   old VGIC implementation.

 - s390: support for trapping software breakpoints, nested
   virtualization (vSIE), the STHYI opcode, initial extensions
   for CPU model support.

 - MIPS: support for MIPS64 hosts (32-bit guests only) and lots
   of cleanups, preliminary to this and the upcoming support for
   hardware virtualization extensions.

 - x86: support for execute-only mappings in nested EPT; reduced
   vmexit latency for TSC deadline timer (by about 30%) on Intel
   hosts; support for more than 255 vCPUs.

 - PPC: bugfixes.

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (302 commits)
  KVM: PPC: Introduce KVM_CAP_PPC_HTM
  MIPS: Select HAVE_KVM for MIPS64_R{2,6}
  MIPS: KVM: Reset CP0_PageMask during host TLB flush
  MIPS: KVM: Fix ptr->int cast via KVM_GUEST_KSEGX()
  MIPS: KVM: Sign extend MFC0/RDHWR results
  MIPS: KVM: Fix 64-bit big endian dynamic translation
  MIPS: KVM: Fail if ebase doesn't fit in CP0_EBase
  MIPS: KVM: Use 64-bit CP0_EBase when appropriate
  MIPS: KVM: Set CP0_Status.KX on MIPS64
  MIPS: KVM: Make entry code MIPS64 friendly
  MIPS: KVM: Use kmap instead of CKSEG0ADDR()
  MIPS: KVM: Use virt_to_phys() to get commpage PFN
  MIPS: Fix definition of KSEGX() for 64-bit
  KVM: VMX: Add VMCS to CPU's loaded VMCSs before VMPTRLD
  kvm: x86: nVMX: maintain internal copy of current VMCS
  KVM: PPC: Book3S HV: Save/restore TM state in H_CEDE
  KVM: PPC: Book3S HV: Pull out TM state save/restore into separate procedures
  KVM: arm64: vgic-its: Simplify MAPI error handling
  KVM: arm64: vgic-its: Make vgic_its_cmd_handle_mapi similar to other handlers
  KVM: arm64: vgic-its: Turn device_id validation into generic ID validation
  ...
2016-08-02 16:11:27 -04:00
Linus Torvalds
ed780686de ARM: 64-bit DT updates for v4.8
Just as the 32-bit contents, the 64-bit device tree branch also contains
 a number of additions this release cycle.
 
 New platforms:
  - LG LG1313
  - Mediatek MT6755
  - Renesas r8a7796
  - Broadcom 2837
 
  Other platforms with larger updates are:
  - Nvidia X1 platforms (USB 3.0, regulators, display subsystem)
  - Mediatek MT8173 (display subsystem added)
  - Rockchip RK3399 (a lot of new peripherals)
  - ARM Juno reference implementation (SCPI power domains, coresight, thermal)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXnnlFAAoJEIwa5zzehBx3vvQQAJRlQ8JtQYzPyyiBGn/F8rbr
 JFf2clMobYwPBQGFHQOC2WGEAZEhTMcc0exzfLp4Iu+9wsZW28KQCZvZHk3Gn60/
 U/e9/V3xFlCFudgOPoxrUzil1XWG6hxI6PMetn2+WwBa3PziZQczXiJu1iWWP1HE
 XSusuE9SL7w0EfBDtJcbdZPQC2Ciq3mzBB7wLEE0Dblz4WgZuE74wWMVpjtb9bhV
 sWtveX45J/UwzUkeIrErwhSzDRCD4D/Vw6p/1gcmCQfY+LFsLs6/QUJbglThyhSJ
 xo72jc6W2Y+FvX4XgFgjofS57mgfdwgmCSY0OhA7FRCWxbRllkzQrgE5JmPAP0J8
 SwfhNe7uH0onuSmiaaTPdcVy6lx572keN6LWjxdW08/qSsDY+TxdxG/zVP3C0lcZ
 Al5NgwP9oViUpSOLkzwmlZvva+8WBLzDLQjMfduX/JsTUubJSVht+34XS2o7uE9D
 15HkqdHX7tQ6GOcOoERr2bKVGkG2MKxMgFcwmILPOARcqKAbxJ/Sq97axJ3Hqdzg
 GLcPV3YKgQ005vhJfswUN1jjKQbjvOY+aAhCekfs/xMyJz+K9IzkRPxKuVDt/1Tg
 J6X5yqk12yRiCvfpHUeFs3LTHLsocX3dM8wevkEacNdEZ7hXyhBzkAgZKjt7ujJ/
 NQtezrdMW/ZRNq7CoS4z
 =g0hR
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull 64-bit ARM DT updates from Olof Johansson:
 "Just as the 32-bit contents, the 64-bit device tree branch also
  contains a number of additions this release cycle.

  New platforms:
   - LG LG1313
   - Mediatek MT6755
   - Renesas r8a7796
   - Broadcom 2837

  Other platforms with larger updates are:
   - Nvidia X1 platforms (USB 3.0, regulators, display subsystem)
   - Mediatek MT8173 (display subsystem added)
   - Rockchip RK3399 (a lot of new peripherals)
   - ARM Juno reference implementation (SCPI power domains, coresight,
     thermal)"

* tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (118 commits)
  arm64: tegra: Enable HDMI on Jetson TX1
  arm64: tegra: Add sor1_src clock
  arm64: tegra: Add XUSB powergates on Tegra210
  arm64: tegra: Add DPAUX pinctrl bindings
  arm64: tegra: Add ACONNECT bus node for Tegra210
  arm64: tegra: Add audio powergate node for Tegra210
  arm64: tegra: Add regulators for Tegra210 Smaug
  arm64: tegra: Correct Tegra210 XUSB mailbox interrupt
  arm64: tegra: Enable XUSB controller on Jetson TX1
  arm64: tegra: Enable debug serial on Jetson TX1
  arm64: tegra: Add Tegra210 XUSB controller
  arm64: tegra: Add Tegra210 XUSB pad controller
  arm64: tegra: Add DSI panel on Jetson TX1
  arm64: tegra: p2597: Add SDMMC power supplies
  arm64: tegra: Add PMIC support on Jetson TX1
  Revert "ARM64: DTS: meson-gxbb: switch ethernet to real clock"
  arm64: dts: hi6220: Add pl031 RTC support
  arm64: dts: r8a7796/salvator-x: Enable watchdog timer
  arm64: dts: r8a7796: Add RWDT node
  arm64: dts: r8a7796: Use SYSC "always-on" PM Domain
  ...
2016-08-01 18:47:01 -04:00
Linus Torvalds
43a0a98aa8 ARM: SoC driver updates for v4.8
Driver updates for ARM SoCs.
 
 A slew of changes this release cycle. The reset driver tree, that we merge
 through arm-soc for historical reasons, is also sizable this time around.
 
 Among the changes:
 
  - clps711x: Treewide changes to compatible strings, merged here for simplicity.
  - Qualcomm: SCM firmware driver cleanups, move to platform driver
  - ux500: Major cleanups, removal of old mach-specific infrastructure.
  - Atmel external bus memory driver
  - Move of brcmstb platform to the rest of bcm
  - PMC driver updates for tegra, various fixes and improvements
  - Samsung platform driver updates to support 64-bit Exynos platforms
  - Reset controller cleanups moving to devm_reset_controller_register() APIs
  - Reset controller driver for Amlogic Meson
  - Reset controller driver for Hisilicon hi6220
  - ARM SCPI power domain support
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXnm1XAAoJEIwa5zzehBx35lcP/ApuQarIXeZCQZtjlUBV9McW
 o3o7FhKFHePmEPeoYCvVeK5D8NykTkQv3WpnCknoxPJzxGJF7jbPWQJcVnXfKOXD
 kTcyIK15WL2HHtSE3lYyLfyUPz8AbJyRt0l0cxgcg6jvo+uzlWooNz1y78rLIYzg
 UwRssj7OiHv4dsyYRHZIsjnB8gMWw8rYMk154gP2xy6MnNXXzzOVVnOiVqxSZBm+
 EgIIcROMOqkkHuFlClMYKluIgrmgz1Ypjf+FuAg7dqXZd+TGRrmGXeI7SkGThfLu
 nyvY3N18NViNu7xOUkI9zg7+ifyYM8Si9ylalSICSJdIAxZfiwFqFaLJvVWKU1rY
 rBOBjKckQI0/X9WYusFNFHcijhIFV8/FgGAnVRRMPdvlCss7Zp03C9mR4AEhmKMX
 rLG49x81hU1C+LftC59ml3iB8dhZrrRkbxNHjLFHVGWNrKMrmJKa8JhXGRAoNM+u
 LRauiuJZatqvLfISNvpfcoW2EashVoU3f+uC8ymT3QCyME3wZm0t7T4tllxhMfBl
 sOgJqNkTKDmPLofwm/dASiLML7ZF1WePScrFyOACnj9K4mUD+OaCnowtWoQPu0eI
 aNmT84oosJ2S9F/iUDPtFHXdzQ+1QPPfSiQ9FXMoauciVq/2F+pqq68yYgqoxFOG
 vmkmG2YM4Wyq43u0BONR
 =O8+y
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Olof Johansson:
 "Driver updates for ARM SoCs.

  A slew of changes this release cycle.  The reset driver tree, that we
  merge through arm-soc for historical reasons, is also sizable this
  time around.

  Among the changes:

   - clps711x: Treewide changes to compatible strings, merged here for simplicity.
   - Qualcomm: SCM firmware driver cleanups, move to platform driver
   - ux500: Major cleanups, removal of old mach-specific infrastructure.
   - Atmel external bus memory driver
   - Move of brcmstb platform to the rest of bcm
   - PMC driver updates for tegra, various fixes and improvements
   - Samsung platform driver updates to support 64-bit Exynos platforms
   - Reset controller cleanups moving to devm_reset_controller_register() APIs
   - Reset controller driver for Amlogic Meson
   - Reset controller driver for Hisilicon hi6220
   - ARM SCPI power domain support"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (100 commits)
  ARM: ux500: consolidate base platform files
  ARM: ux500: move soc_id driver to drivers/soc
  ARM: ux500: call ux500_setup_id later
  ARM: ux500: consolidate soc_device code in id.c
  ARM: ux500: remove cpu_is_u* helpers
  ARM: ux500: use CLK_OF_DECLARE()
  ARM: ux500: move l2x0 init to .init_irq
  mfd: db8500 stop passing around platform data
  ASoC: ab8500-codec: remove platform data based probe
  ARM: ux500: move ab8500_regulator_plat_data into driver
  ARM: ux500: remove unused regulator data
  soc: raspberrypi-power: add CONFIG_OF dependency
  firmware: scpi: add CONFIG_OF dependency
  video: clps711x-fb: Changing the compatibility string to match with the smallest supported chip
  input: clps711x-keypad: Changing the compatibility string to match with the smallest supported chip
  pwm: clps711x: Changing the compatibility string to match with the smallest supported chip
  serial: clps711x: Changing the compatibility string to match with the smallest supported chip
  irqchip: clps711x: Changing the compatibility string to match with the smallest supported chip
  clocksource: clps711x: Changing the compatibility string to match with the smallest supported chip
  clk: clps711x: Changing the compatibility string to match with the smallest supported chip
  ...
2016-08-01 18:36:01 -04:00
Linus Torvalds
3fbff9c874 ARM: SoC 64-bit changes for v4.8
Changes to platform code for 64-bit ARM platforms.
 
 Nearlt all of these are defconfig updates to enable new drivers or old
 drivers still used on these 64-bit platforms.
 
 Added platforms for this release are:
 
  - Broadcom BCM2837
  - Renesas R8A7796
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXn8CqAAoJEIwa5zzehBx3GRAP/1BxUsof8EAXqsaUAvaCHhcD
 rAj2QEPUzV9TYHB/QRQHyoLdll/sND+SOcCOlC3hqUJNEFVNm0DUKjLcKLITqJr4
 S9qrWuDRn+mWNXO2AfHCpQILMZloiRtM8xE51wmTIyT0S6APXZ1kvhJDrfFNGM0O
 iSlWoulCUztT0AhZiA+TWduzrUiBarvOX6oVx0z7eTV5R0v/bSHDc9x/VhYOKFN6
 rhg0164io3XNZ1ItiFODh7deFMztz5mJBegYvGufVNTdP6nLjJ//KGSUI67Ibae1
 wNORW96nUVz/N4tJ4iL6z87CodgZIFS/cQlMjnyOe2wCWv0rgaYaeEoDqsUUI2oj
 N/VGneCgLtmBcUnDf1Tpi8z4VnkAiXIsJwbAaOCkmsRimJxILm4+7s3ARrKKUmld
 Za9ExSpQICwiHj9mm5ak4B6e83/MFRqbeA3v3d+I2xoc1rT+eC7+cyXTCYtnUKng
 7oOb7Zjtm1As3ZlzD3qK5mZuTFkEZ7bwZjZAlcPEGbepN9+Nyo5JhCbKH8diLy2j
 wXrov9LvvwHfoKepkt7OUz8xb33GNgmaRFURZbmXai8SfV+uqLetCrmZse5fUVMp
 4eRVLcgCSUDUb/2Mzw8309tVYoHY45g1NMnaGZY94j2NJhDXDR9ztv8u5WcVLOHa
 zjvp3/pwyGZB4h5CW+e6
 =vsam
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull 64-bit ARM SoC updates from Olof Johansson:
 "Changes to platform code for 64-bit ARM platforms.

  Nearly all of these are defconfig updates to enable new drivers or old
  drivers still used on these 64-bit platforms.

  Added platforms for this release are:

   - Broadcom BCM2837
   - Renesas R8A7796"

* tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (22 commits)
  arm64: remove duplicate PWM entry in defconfig
  arm64: Update default configuration
  arm64: defconfig: Enable more IP blocks for Exynos7 and Exynos5433
  arm64: amlogic: select gxbb clk driver
  arm64: defconfig: Enable S2MPS11 clock and S3C RTC driver
  arm64: marvell: enable Armada 3700 clock drivers
  arm64: defconfig: enable msm8996 pinctrl support
  arm64: defconfig: Enable qcom msm8996 clk drivers
  arm: defconfig: Enable PM8941 pwr key
  arm64: defconfig: enable stmmac and realtek PHY as modules
  arm64: Kconfig: select PM{,_GENERIC_DOMAINS} for ARCH_VEXPRESS
  arm64: defconfig: enable SENSORS_ARM_SCPI
  arm64: defconfig: enable Generic on-chip SRAM driver
  arm64: configs: enable PCIe driver for Armada 7K/8K
  arm64: Add platform selection for BCM2835.
  arm64: defconfig: disable plain NEON implementation of AES
  arm64: Allow for different DMA and CPU bus offsets
  arm64: defconfig: enable Renesas R8A7796 SoC
  arm64: defconfig: Enable Cadence MACB/GEM support
  ARM64: Kconfig: Select the Amlogic Meson pin controller driver
  ...
2016-08-01 18:29:28 -04:00
Bjorn Helgaas
9454c23852 Merge branch 'pci/msi-affinity' into next
Conflicts:
	drivers/nvme/host/pci.c
2016-08-01 12:34:01 -05:00
Bjorn Helgaas
a04bee8285 Merge branches 'pci/host-aardvark', 'pci/host-altera', 'pci/host-dra7xx', 'pci/host-hv', 'pci/host-vmd' and 'pci/host-xilinx' into next
* pci/host-aardvark:
  arm64: dts: marvell: Add Aardvark PCIe support for Armada 3700
  PCI: aardvark: Add Aardvark PCI host controller driver
  dt-bindings: add DT binding for the Aardvark PCIe controller

* pci/host-altera:
  PCI: altera: Poll for link up status after retraining the link
  PCI: altera: Check link status before retrain link
  PCI: altera: Reorder read/write functions

* pci/host-dra7xx:
  PCI: dra7xx: Fix return value in case of error

* pci/host-hv:
  PCI: hv: Fix interrupt cleanup path
  PCI: hv: Handle all pending messages in hv_pci_onchannelcallback()
  PCI: hv: Don't leak buffer in hv_pci_onchannelcallback()

* pci/host-vmd:
  x86/PCI: VMD: Separate MSI and MSI-X vector sharing
  x86/PCI: VMD: Use x86_vector_domain as parent domain
  x86/PCI: VMD: Use lock save/restore in interrupt enable path
  x86/PCI: VMD: Initialize list item in IRQ disable
  x86/PCI: VMD: Select device dma ops to override

* pci/host-xilinx:
  PCI: xilinx: Fix return value in case of error

Manually apply changes from pci/demodularize-hosts and
pci/host-request-windows to drivers/pci/host/pci-aardvark.c
2016-08-01 12:32:13 -05:00
Bjorn Helgaas
3efc702378 Merge branch 'pci/resource' into next
* pci/resource:
  unicore32/PCI: Remove pci=firmware command line parameter handling
  ARM/PCI: Remove arch-specific pcibios_enable_device()
  ARM64/PCI: Remove arch-specific pcibios_enable_device()
  MIPS/PCI: Claim bus resources on PCI_PROBE_ONLY set-ups
  ARM/PCI: Claim bus resources on PCI_PROBE_ONLY set-ups
  PCI: generic: Claim bus resources on PCI_PROBE_ONLY set-ups
  PCI: Add generic pci_bus_claim_resources()
  alx: Use pci_(request|release)_mem_regions
  ethernet/intel: Use pci_(request|release)_mem_regions
  GenWQE: Use pci_(request|release)_mem_regions
  lpfc: Use pci_(request|release)_mem_regions
  NVMe: Use pci_(request|release)_mem_regions
  PCI: Add helpers to request/release memory and I/O regions
  PCI: Extending pci=resource_alignment to specify device/vendor IDs
  sparc/PCI: Implement pci_resource_to_user() with pcibios_resource_to_bus()
  powerpc/pci: Implement pci_resource_to_user() with pcibios_resource_to_bus()
  microblaze/PCI: Implement pci_resource_to_user() with pcibios_resource_to_bus()
  PCI: Unify pci_resource_to_user() declarations
  microblaze/PCI: Remove useless __pci_mmap_set_pgprot()
  powerpc/pci: Remove __pci_mmap_set_pgprot()
  PCI: Ignore write combining when mapping I/O port space
2016-08-01 12:23:44 -05:00
Bjorn Helgaas
a00c74c166 Merge branches 'pci/aspm', 'pci/dpc', 'pci/hotplug', 'pci/misc', 'pci/msi', 'pci/pm' and 'pci/virtualization' into next
* pci/aspm:
  PCI/ASPM: Remove redundant check of pcie_set_clkpm

* pci/dpc:
  PCI: Remove DPC tristate module option
  PCI: Bind DPC to Root Ports as well as Downstream Ports
  PCI: Fix whitespace in struct dpc_dev
  PCI: Convert Downstream Port Containment driver to use devm_* functions

* pci/hotplug:
  PCI: Allow additional bus numbers for hotplug bridges

* pci/misc:
  PCI: Include <asm/dma.h> for isa_dma_bridge_buggy
  PCI: Make bus_attr_resource_alignment static
  MAINTAINERS: Add file patterns for PCI device tree bindings
  PCI: Fix comment typo

* pci/msi:
  PCI/MSI: irqchip: Fix PCI_MSI dependencies

* pci/pm:
  PCI: pciehp: Ignore interrupts during D3cold
  PCI: Document connection between pci_power_t and hardware PM capability
  PCI: Add runtime PM support for PCIe ports
  ACPI / hotplug / PCI: Runtime resume bridge before rescan
  PCI: Power on bridges before scanning new devices
  PCI: Put PCIe ports into D3 during suspend
  PCI: Don't clear d3cold_allowed for PCIe ports
  PCI / PM: Enforce type casting for pci_power_t

* pci/virtualization:
  PCI: Add ACS quirk for Solarflare SFC9220
  PCI: Add DMA alias quirk for Adaptec 3805
  PCI: Mark Atheros AR9485 and QCA9882 to avoid bus reset
  PCI: Add function 1 DMA alias quirk for Marvell 88SE9182
2016-08-01 12:23:31 -05:00
Andrew Jones
89581f06b2 arm64: KVM: Set cpsr before spsr on fault injection
We need to set cpsr before determining the spsr bank, as the bank
depends on the target exception level of the injection, not the
current mode of the vcpu. Normally this is one in the same (EL1),
but not when we manage to trap an EL0 fault. It still doesn't really
matter for the 64-bit EL0 case though, as vcpu_spsr() unconditionally
uses the EL1 bank for that. However the 32-bit EL0 case gets fun, as
that path will lead to the BUG() in vcpu_spsr32().

This patch fixes the assignment order and also modifies some white
space in order to better group pairs of lines that have strict order.

Cc: stable@vger.kernel.org # v4.5
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-08-01 15:09:47 +01:00
Ard Biesheuvel
04a8481061 arm64: mm: avoid fdt_check_header() before the FDT is fully mapped
As reported by Zijun, the fdt_check_header() call in __fixmap_remap_fdt()
is not safe since it is not guaranteed that the FDT header is mapped
completely. Due to the minimum alignment of 8 bytes, the only fields we
can assume to be mapped are 'magic' and 'totalsize'.

Since the OF layer is in charge of validating the FDT image, and we are
only interested in making reasonably sure that the size field contains
a meaningful value, replace the fdt_check_header() call with an explicit
comparison of the magic field's value against the expected value.

Cc: <stable@vger.kernel.org>
Reported-by: Zijun Hu <zijun_hu@htc.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-08-01 14:17:01 +01:00
Linus Torvalds
f64d6e2aaa DeviceTree update for 4.8:
- Removal of most of_platform_populate() calls in arch code. Now the DT
 core code calls it in the default case and platforms only need to call
 it if they have special needs.
 
 - Use pr_fmt on all the DT core print statements.
 
 - CoreSight binding doc improvements to block name descriptions.
 
 - Add dt_to_config script which can parse dts files and list
 corresponding kernel config options.
 
 - Fix memory leak hit with a PowerMac DT.
 
 - Correct a bunch of STMicro compatible strings to use the correct
 vendor prefix.
 
 - Fix DA9052 PMIC binding doc to match what is actually used in dts
 files.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXm9KcAAoJEPr7XbWNvGHDRT4QAIIIOSB4AWHardnMLROgGge9
 aOQKZ/05O9feOcxYKe8FkQbcH+IujJjrUL+yrRD36yGQPAyBP21gtcmmfrkCcwFM
 kH915f/JbGvXpfwEf8dcarHhzYH6FFJiQGduPpWfwSSWynx+xq5EKPwCqYzMg8bN
 SExxt7vUx1MKFOExZ0K8BNCo8VMVLUWQoJ1DNeJDuL25Op4EU3i2l1HQNYV/3XDk
 BSA3x7Lw3GjrWEH20VWYn2Azq1OFLY+E2FC2lnG4nbkk5X8dZbUH9PR1Sk7uTQDj
 uxTjWe59NBpliCxKSAbMbTAU/WwSB1pJ0I+zDJBiQsdFT+nb5F4zOrs3qSKHa/A9
 Rv6AC8k5gdSMrDB1dOspfF2vWvOOInXgNV4/Kza0D92mbCpwyUuF+vhE6rfcMrZU
 OiD7rj2/fvO7Y9fUAhrp6zrfrOfH9B1Z9vS+940AlK96YwPE2+J0SA2vBxR/wg8H
 7fj4Ud5X+SFisXWQhh5Wlv0W9o6e7C7fsi8vpkQ7gufmezLFWVnJKsUfQaxGEwhG
 Hkhm9kuSHHMd+6dEnn2756DnNfJAtQv6rSR0/QR4Lf9y5L4dvR3kAQIci8X/nx4P
 sIk+IJWGZG6wziZq59hh+SO6HEqdSNuvh+5sbR0iUimdE/1HsDBdPiocXf/r8iwK
 NY9nGeZPRrXmFgdpoZfm
 =wLMr
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull DeviceTree updates from Rob Herring:

 - remove most of_platform_populate() calls in arch code.  Now the DT
   core code calls it in the default case and platforms only need to
   call it if they have special needs

 - use pr_fmt on all the DT core print statements

 - CoreSight binding doc improvements to block name descriptions

 - add dt_to_config script which can parse dts files and list
   corresponding kernel config options

 - fix memory leak hit with a PowerMac DT

 - correct a bunch of STMicro compatible strings to use the correct
   vendor prefix

 - fix DA9052 PMIC binding doc to match what is actually used in dts
   files

* tag 'devicetree-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (35 commits)
  documentation: da9052: Update regulator bindings names to match DA9052/53 DTS expectations
  xtensa: Partially Revert "xtensa: Remove unnecessary of_platform_populate with default match table"
  xtensa: Fix build error due to missing include file
  MIPS: ath79: Add missing include file
  Fix spelling errors in Documentation/devicetree
  ARM: dts: fix STMicroelectronics compatible strings
  powerpc/dts: fix STMicroelectronics compatible strings
  Documentation: dt: i2c: use correct STMicroelectronics vendor prefix
  scripts/dtc: dt_to_config - kernel config options for a devicetree
  of: fdt: mark unflattened tree as detached
  of: overlay: add resolver error prints
  coresight: document binding acronyms
  Documentation/devicetree: document cavium-pip rx-delay/tx-delay properties
  of: use pr_fmt prefix for all console printing
  of/irq: Mark initialised interrupt controllers as populated
  of: fix memory leak related to safe_name()
  Revert "of/platform: export of_default_bus_match_table"
  of: unittest: use of_platform_default_populate() to populate default bus
  memory: omap-gpmc: use of_platform_default_populate() to populate default bus
  bus: uniphier-system-bus: use of_platform_default_populate() to populate default bus
  ...
2016-07-30 11:32:01 -07:00
Linus Torvalds
7a1e8b80fb Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security subsystem updates from James Morris:
 "Highlights:

   - TPM core and driver updates/fixes
   - IPv6 security labeling (CALIPSO)
   - Lots of Apparmor fixes
   - Seccomp: remove 2-phase API, close hole where ptrace can change
     syscall #"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (156 commits)
  apparmor: fix SECURITY_APPARMOR_HASH_DEFAULT parameter handling
  tpm: Add TPM 2.0 support to the Nuvoton i2c driver (NPCT6xx family)
  tpm: Factor out common startup code
  tpm: use devm_add_action_or_reset
  tpm2_i2c_nuvoton: add irq validity check
  tpm: read burstcount from TPM_STS in one 32-bit transaction
  tpm: fix byte-order for the value read by tpm2_get_tpm_pt
  tpm_tis_core: convert max timeouts from msec to jiffies
  apparmor: fix arg_size computation for when setprocattr is null terminated
  apparmor: fix oops, validate buffer size in apparmor_setprocattr()
  apparmor: do not expose kernel stack
  apparmor: fix module parameters can be changed after policy is locked
  apparmor: fix oops in profile_unpack() when policy_db is not present
  apparmor: don't check for vmalloc_addr if kvzalloc() failed
  apparmor: add missing id bounds check on dfa verification
  apparmor: allow SYS_CAP_RESOURCE to be sufficient to prlimit another task
  apparmor: use list_next_entry instead of list_entry_next
  apparmor: fix refcount race when finding a child profile
  apparmor: fix ref count leak when profile sha1 hash is read
  apparmor: check that xindex is in trans_table bounds
  ...
2016-07-29 17:38:46 -07:00
Linus Torvalds
a6408f6cb6 Merge branch 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull smp hotplug updates from Thomas Gleixner:
 "This is the next part of the hotplug rework.

   - Convert all notifiers with a priority assigned

   - Convert all CPU_STARTING/DYING notifiers

     The final removal of the STARTING/DYING infrastructure will happen
     when the merge window closes.

  Another 700 hundred line of unpenetrable maze gone :)"

* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits)
  timers/core: Correct callback order during CPU hot plug
  leds/trigger/cpu: Move from CPU_STARTING to ONLINE level
  powerpc/numa: Convert to hotplug state machine
  arm/perf: Fix hotplug state machine conversion
  irqchip/armada: Avoid unused function warnings
  ARC/time: Convert to hotplug state machine
  clocksource/atlas7: Convert to hotplug state machine
  clocksource/armada-370-xp: Convert to hotplug state machine
  clocksource/exynos_mct: Convert to hotplug state machine
  clocksource/arm_global_timer: Convert to hotplug state machine
  rcu: Convert rcutree to hotplug state machine
  KVM/arm/arm64/vgic-new: Convert to hotplug state machine
  smp/cfd: Convert core to hotplug state machine
  x86/x2apic: Convert to CPU hotplug state machine
  profile: Convert to hotplug state machine
  timers/core: Convert to hotplug state machine
  hrtimer: Convert to hotplug state machine
  x86/tboot: Convert to hotplug state machine
  arm64/armv8 deprecated: Convert to hotplug state machine
  hwtracing/coresight-etm4x: Convert to hotplug state machine
  ...
2016-07-29 13:55:30 -07:00
James Hogan
3146bc64d1 arm64: Define AT_VECTOR_SIZE_ARCH for ARCH_DLINFO
AT_VECTOR_SIZE_ARCH should be defined with the maximum number of
NEW_AUX_ENT entries that ARCH_DLINFO can contain, but it wasn't defined
for arm64 at all even though ARCH_DLINFO will contain one NEW_AUX_ENT
for the VDSO address.

This shouldn't be a problem as AT_VECTOR_SIZE_BASE includes space for
AT_BASE_PLATFORM which arm64 doesn't use, but lets define it now and add
the comment above ARCH_DLINFO as found in several other architectures to
remind future modifiers of ARCH_DLINFO to keep AT_VECTOR_SIZE_ARCH up to
date.

Fixes: f668cd1673 ("arm64: ELF definitions")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-07-29 10:45:58 +01:00
Ard Biesheuvel
08cc55b2af arm64: relocatable: suppress R_AARCH64_ABS64 relocations in vmlinux
The linker routines that we rely on to produce a relocatable PIE binary
treat it as a shared ELF object in some ways, i.e., it emits symbol based
R_AARCH64_ABS64 relocations into the final binary since doing so would be
appropriate when linking a shared library that is subject to symbol
preemption. (This means that an executable can override certain symbols
that are exported by a shared library it is linked with, and that the
shared library *must* update all its internal references as well, and point
them to the version provided by the executable.)

Symbol preemption does not occur for OS hosted PIE executables, let alone
for vmlinux, and so we would prefer to get rid of these symbol based
relocations. This would allow us to simplify the relocation routines, and
to strip the .dynsym, .dynstr and .hash sections from the binary. (Note
that these are tiny, and are placed in the .init segment, but they clutter
up the vmlinux binary.)

Note that these R_AARCH64_ABS64 relocations are only emitted for absolute
references to symbols defined in the linker script, all other relocatable
quantities are covered by anonymous R_AARCH64_RELATIVE relocations that
simply list the offsets to all 64-bit values in the binary that need to be
fixed up based on the offset between the link time and run time addresses.

Fortunately, GNU ld has a -Bsymbolic option, which is intended for shared
libraries to allow them to ignore symbol preemption, and unconditionally
bind all internal symbol references to its own definitions. So set it for
our PIE binary as well, and get rid of the asoociated sections and the
relocation code that processes them.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
[will: fixed conflict with __dynsym_offset linker script entry]
Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-07-29 10:45:01 +01:00
Ard Biesheuvel
d6732fc402 arm64: vmlinux.lds: make __rela_offset and __dynsym_offset ABSOLUTE
Due to the untyped KIMAGE_VADDR constant, the linker may not notice
that the __rela_offset and __dynsym_offset expressions are absolute
values (i.e., are not subject to relocation). This does not matter for
KASLR, but it does confuse kallsyms in relative mode, since it uses
the lowest non-absolute symbol address as the anchor point, and expects
all other symbol addresses to be within 4 GB of it.

Fix this by qualifying these expressions as ABSOLUTE() explicitly.

Fixes: 0cd3defe0a ("arm64: kernel: perform relocation processing from ID map")
Cc: <stable@vger.kernel.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-07-29 10:44:53 +01:00