Commit Graph

1136 Commits

Author SHA1 Message Date
Naohiro Aota
f7ef5287a6 btrfs: zoned: relocate block group to repair IO failure in zoned filesystems
When a bad checksum is found and if the filesystem has a mirror of the
damaged data, we read the correct data from the mirror and writes it to
damaged blocks. This however, violates the sequential write constraints
of a zoned block device.

We can consider three methods to repair an IO failure in zoned filesystems:

(1) Reset and rewrite the damaged zone
(2) Allocate new device extent and replace the damaged device extent to
    the new extent
(3) Relocate the corresponding block group

Method (1) is most similar to a behavior done with regular devices.
However, it also wipes non-damaged data in the same device extent, and
so it unnecessary degrades non-damaged data.

Method (2) is much like device replacing but done in the same device. It
is safe because it keeps the device extent until the replacing finish.
However, extending device replacing is non-trivial. It assumes
"src_dev->physical == dst_dev->physical". Also, the extent mapping
replacing function should be extended to support replacing device extent
position in one device.

Method (3) invokes relocation of the damaged block group and is
straightforward to implement. It relocates all the mirrored device
extents, so it potentially is a more costly operation than method (1) or
(2). But it relocates only used extents which reduce the total IO size.

Let's apply method (3) for now. In the future, we can extend device-replace
and apply method (2).

For protecting a block group gets relocated multiple time with multiple
IO errors, this commit introduces "relocating_repair" bit to show it's
now relocating to repair IO failures. Also it uses a new kthread
"btrfs-relocating-repair", not to block IO path with relocating process.

This commit also supports repairing in the scrub process.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-02-09 02:46:07 +01:00
Naohiro Aota
de17addce7 btrfs: zoned: implement copying for zoned device-replace
This is 3/4 patch to implement device-replace on zoned filesystems.

This commit implements copying. To do this, it tracks the write pointer
during the device replace process. As device-replace's copy process is
smart enough to only copy used extents on the source device, we have to
fill the gap to honor the sequential write requirement in the target
device.

The device-replace process on zoned filesystems must copy or clone all
the extents in the source device exactly once. So, we need to ensure
allocations started just before the dev-replace process to have their
corresponding extent information in the B-trees.
finish_extent_writes_for_zoned() implements that functionality, which
basically is the removed code in the commit 042528f8d8 ("Btrfs: fix
block group remaining RO forever after error during device replace").

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-02-09 02:46:07 +01:00
Naohiro Aota
6143c23ccc btrfs: zoned: implement cloning for zoned device-replace
This is 2/4 patch to implement device replace for zoned filesystems.

In zoned mode, a block group must be either copied (from the source
device to the target device) or cloned (to both devices).

Implement the cloning part. If a block group targeted by an IO is marked
to copy, we should not clone the IO to the destination device, because
the block group is eventually copied by the replace process.

This commit also handles cloning of device reset.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-02-09 02:46:07 +01:00
Naohiro Aota
d8e3fb106f btrfs: zoned: use ZONE_APPEND write for zoned mode
Enable zone append writing for zoned mode. When using zone append, a
bio is issued to the start of a target zone and the device decides to
place it inside the zone. Upon completion the device reports the actual
written position back to the host.

Three parts are necessary to enable zone append mode. First, modify the
bio to use REQ_OP_ZONE_APPEND in btrfs_submit_bio_hook() and adjust the
bi_sector to point the beginning of the zone.

Second, record the returned physical address (and disk/partno) to the
ordered extent in end_bio_extent_writepage() after the bio has been
completed. We cannot resolve the physical address to the logical address
because we can neither take locks nor allocate a buffer in this end_bio
context. So, we need to record the physical address to resolve it later
in btrfs_finish_ordered_io().

And finally, rewrite the logical addresses of the extent mapping and
checksum data according to the physical address using btrfs_rmap_block.
If the returned address matches the originally allocated address, we can
skip this rewriting process.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-02-09 02:46:06 +01:00
Naohiro Aota
cfe94440d1 btrfs: zoned: handle REQ_OP_ZONE_APPEND as writing
Zoned filesystems use REQ_OP_ZONE_APPEND bios for writing to actual
devices.

Let btrfs_end_bio() and btrfs_op be aware of it, by mapping
REQ_OP_ZONE_APPEND to BTRFS_MAP_WRITE and using btrfs_op() instead of
bio_op().

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-02-09 02:46:05 +01:00
Naohiro Aota
381a696eb5 btrfs: zoned: verify device extent is aligned to zone
Add a check in verify_one_dev_extent() to ensure that a device extent on
a zoned block device is aligned to the respective zone boundary.

If it isn't, mark the filesystem as unclean.

Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-02-09 02:46:03 +01:00
Naohiro Aota
1cd6121f2a btrfs: zoned: implement zoned chunk allocator
Implement a zoned chunk and device extent allocator. One device zone
becomes a device extent so that a zone reset affects only this device
extent and does not change the state of blocks in the neighbor device
extents.

To implement the allocator, we need to extend the following functions for
a zoned filesystem.

- init_alloc_chunk_ctl
- dev_extent_search_start
- dev_extent_hole_check
- decide_stripe_size

init_alloc_chunk_ctl_zoned() is mostly the same as regular one. It always
set the stripe_size to the zone size and aligns the parameters to the zone
size.

dev_extent_search_start() only aligns the start offset to zone boundaries.
We don't care about the first 1MB like in regular filesystem because we
anyway reserve the first two zones for superblock logging.

dev_extent_hole_check_zoned() checks if zones in given hole are either
conventional or empty sequential zones. Also, it skips zones reserved for
superblock logging.

With the change to the hole, the new hole may now contain pending extents.
So, in this case, loop again to check that.

Finally, decide_stripe_size_zoned() should shrink the number of devices
instead of stripe size because we need to honor stripe_size == zone_size.

Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-02-09 02:46:03 +01:00
Naohiro Aota
7365104236 btrfs: zoned: defer loading zone info after opening trees
This is a preparation patch to implement zone emulation on a regular
device.

To emulate a zoned filesystem on a regular (non-zoned) device, we need to
decide an emulated zone size. Instead of making it a compile-time static
value, we'll make it configurable at mkfs time. Since we have one zone ==
one device extent restriction, we can determine the emulated zone size
from the size of a device extent. We can extend btrfs_get_dev_zone_info()
to show a regular device filled with conventional zones once the zone size
is decided.

The current call site of btrfs_get_dev_zone_info() during the mount process
is earlier than loading the file system trees so that we don't know the
size of a device extent at this point. Thus we can't slice a regular device
to conventional zones.

This patch introduces btrfs_get_dev_zone_info_all_devices to load the zone
info for all the devices. And, it places this function in open_ctree()
after loading the trees.

Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-02-09 02:32:16 +01:00
Michal Rostecki
4203431319 btrfs: let callers of btrfs_get_io_geometry pass the em
Before this change, the btrfs_get_io_geometry() function was calling
btrfs_get_chunk_map() to get the extent mapping, necessary for
calculating the I/O geometry. It was using that extent mapping only
internally and freeing the pointer after its execution.

That resulted in calling btrfs_get_chunk_map() de facto twice by the
__btrfs_map_block() function. It was calling btrfs_get_io_geometry()
first and then calling btrfs_get_chunk_map() directly to get the extent
mapping, used by the rest of the function.

Change that to passing the extent mapping to the btrfs_get_io_geometry()
function as an argument.

This could improve performance in some cases.  For very large
filesystems, i.e. several thousands of allocated chunks, not only this
avoids searching two times the rbtree, saving time, it may also help
reducing contention on the lock that protects the tree - thinking of
writeback starting for multiple inodes, other tasks allocating or
removing chunks, and anything else that requires access to the rbtree.

Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Michal Rostecki <mrostecki@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add Filipe's analysis ]
Signed-off-by: David Sterba <dsterba@suse.com>
2021-02-08 22:59:00 +01:00
Nikolay Borisov
7056bf69e5 btrfs: consolidate btrfs_previous_item ret val handling in btrfs_shrink_device
Instead of having three 'if' to handle non-NULL return value consolidate
this in one 'if (ret)'. That way the code is more obvious:

 - Always drop delete_unused_bgs_mutex if ret is not NULL
 - If ret is negative -> goto done
 - If it's 1 -> reset ret to 0, release the path and finish the loop.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-02-08 22:58:51 +01:00
Linus Torvalds
c05d51c773 for-5.11-rc5-tag
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE8rQSAMVO+zA4DBdWxWXV+ddtWDsFAmAUIkAACgkQxWXV+ddt
 WDsWVg/+IIEk9H1v9q9ShvVmPvmnlT8/0ywj1hdwFMBkFBjIeU8tBz9ZMGPXCzrF
 XemmWKChVOnR3SIq/bMrwuRC/Gv/pBvwVshXLP51YJHv7lSGX0Ayrb27BFQcVaC/
 3QhpE7veEiqxwLyMj+LWG4hE2X+oqiqzrXCpeC5un4zEluT45RSKooqueQ4jM8aw
 DrKLQA57a1YEIqrE2KQzy5A6BnSNyxPXEEX34kbugmmen46Fh77hrwme1K9vQn1t
 v3/V4LcarXADxxokAxU2Igb/vK0+BN33NOYsBwLWWD4kUaTGS4KczsDOowkRRTMH
 /qiQUdca0X7ElR+VFl8rgB8PxuJcZ87aCdsMkErUA4sjxyp11VDIeEgirPNAcXtR
 b+1LIkn3k3l8JzkKyXwDuZuNBsh0idTY24IE+QDBMIGq+jE1N6N3t5gEwa2NeaiP
 9O5QnS5XAJCo8a9+gp1aF5z94vwQwvf9TA80nGrnpxGmXEEEZ9PgXsc4JON1Blhn
 NtJDwBPzEjHCEYdE73/lRMsLmYeGhpRugKb+lQ+OTo2iZzxH2SjWn9vXKiN7vAp2
 zysjzdPfkY5BLggH5cPg0fuRaf/Is00EeVqn3eA7QsFKDhrpoPFBO+aV5xeshsaz
 8fjt7kkXFb+Vyy4SDvmPioJQ7/MFZ5Czn+BL1JwO4l/vYcEMUzM=
 =/yHv
 -----END PGP SIGNATURE-----

Merge tag 'for-5.11-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:
 "A few more fixes for a late rc:

   - fix lockdep complaint on 32bit arches and also remove an unsafe
     memory use due to device vs filesystem lifetime

   - two fixes for free space tree:

      * race during log replay and cache rebuild, now more likely to
        happen due to changes in this dev cycle

      * possible free space tree corruption with online conversion
        during initial tree population"

* tag 'for-5.11-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: fix log replay failure due to race with space cache rebuild
  btrfs: fix lockdep warning due to seqcount_mutex on 32bit arch
  btrfs: fix possible free space tree corruption with online conversion
2021-01-29 13:54:40 -08:00
Su Yue
c41ec4529d btrfs: fix lockdep warning due to seqcount_mutex on 32bit arch
This effectively reverts commit d5c8238849 ("btrfs: convert
data_seqcount to seqcount_mutex_t").

While running fstests on 32 bits test box, many tests failed because of
warnings in dmesg. One of those warnings (btrfs/003):

  [66.441317] WARNING: CPU: 6 PID: 9251 at include/linux/seqlock.h:279 btrfs_remove_chunk+0x58b/0x7b0 [btrfs]
  [66.441446] CPU: 6 PID: 9251 Comm: btrfs Tainted: G           O      5.11.0-rc4-custom+ #5
  [66.441449] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ArchLinux 1.14.0-1 04/01/2014
  [66.441451] EIP: btrfs_remove_chunk+0x58b/0x7b0 [btrfs]
  [66.441472] EAX: 00000000 EBX: 00000001 ECX: c576070c EDX: c6b15803
  [66.441475] ESI: 10000000 EDI: 00000000 EBP: c56fbcfc ESP: c56fbc70
  [66.441477] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010246
  [66.441481] CR0: 80050033 CR2: 05c8da20 CR3: 04b20000 CR4: 00350ed0
  [66.441485] Call Trace:
  [66.441510]  btrfs_relocate_chunk+0xb1/0x100 [btrfs]
  [66.441529]  ? btrfs_lookup_block_group+0x17/0x20 [btrfs]
  [66.441562]  btrfs_balance+0x8ed/0x13b0 [btrfs]
  [66.441586]  ? btrfs_ioctl_balance+0x333/0x3c0 [btrfs]
  [66.441619]  ? __this_cpu_preempt_check+0xf/0x11
  [66.441643]  btrfs_ioctl_balance+0x333/0x3c0 [btrfs]
  [66.441664]  ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs]
  [66.441683]  btrfs_ioctl+0x414/0x2ae0 [btrfs]
  [66.441700]  ? __lock_acquire+0x35f/0x2650
  [66.441717]  ? lockdep_hardirqs_on+0x87/0x120
  [66.441720]  ? lockdep_hardirqs_on_prepare+0xd0/0x1e0
  [66.441724]  ? call_rcu+0x2d3/0x530
  [66.441731]  ? __might_fault+0x41/0x90
  [66.441736]  ? kvm_sched_clock_read+0x15/0x50
  [66.441740]  ? sched_clock+0x8/0x10
  [66.441745]  ? sched_clock_cpu+0x13/0x180
  [66.441750]  ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs]
  [66.441750]  ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs]
  [66.441768]  __ia32_sys_ioctl+0x165/0x8a0
  [66.441773]  ? __this_cpu_preempt_check+0xf/0x11
  [66.441785]  ? __might_fault+0x89/0x90
  [66.441791]  __do_fast_syscall_32+0x54/0x80
  [66.441796]  do_fast_syscall_32+0x32/0x70
  [66.441801]  do_SYSENTER_32+0x15/0x20
  [66.441805]  entry_SYSENTER_32+0x9f/0xf2
  [66.441808] EIP: 0xab7b5549
  [66.441814] EAX: ffffffda EBX: 00000003 ECX: c4009420 EDX: bfa91f5c
  [66.441816] ESI: 00000003 EDI: 00000001 EBP: 00000000 ESP: bfa91e98
  [66.441818] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b EFLAGS: 00000292
  [66.441833] irq event stamp: 42579
  [66.441835] hardirqs last  enabled at (42585): [<c60eb065>] console_unlock+0x495/0x590
  [66.441838] hardirqs last disabled at (42590): [<c60eafd5>] console_unlock+0x405/0x590
  [66.441840] softirqs last  enabled at (41698): [<c601b76c>] call_on_stack+0x1c/0x60
  [66.441843] softirqs last disabled at (41681): [<c601b76c>] call_on_stack+0x1c/0x60

  ========================================================================
  btrfs_remove_chunk+0x58b/0x7b0:
  __seqprop_mutex_assert at linux/./include/linux/seqlock.h:279
  (inlined by) btrfs_device_set_bytes_used at linux/fs/btrfs/volumes.h:212
  (inlined by) btrfs_remove_chunk at linux/fs/btrfs/volumes.c:2994
  ========================================================================

The warning is produced by lockdep_assert_held() in
__seqprop_mutex_assert() if CONFIG_LOCKDEP is enabled.
And "olumes.c:2994 is btrfs_device_set_bytes_used() with mutex lock
fs_info->chunk_mutex held already.

After adding some debug prints, the cause was found that many
__alloc_device() are called with NULL @fs_info (during scanning ioctl).
Inside the function, btrfs_device_data_ordered_init() is expanded to
seqcount_mutex_init().  In this scenario, its second
parameter info->chunk_mutex  is &NULL->chunk_mutex which equals
to offsetof(struct btrfs_fs_info, chunk_mutex) unexpectedly. Thus,
seqcount_mutex_init() is called in wrong way. And later
btrfs_device_get/set helpers trigger lockdep warnings.

The device and filesystem object lifetimes are different and we'd have
to synchronize initialization of the btrfs_device::data_seqcount with
the fs_info, possibly using some additional synchronization. It would
still not prevent concurrent access to the seqcount lock when it's used
for read and initialization.

Commit d5c8238849 ("btrfs: convert data_seqcount to seqcount_mutex_t")
does not mention a particular problem being fixed so revert should not
cause any harm and we'll get the lockdep warning fixed.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=210139
Reported-by: Erhard F <erhard_f@mailbox.org>
Fixes: d5c8238849 ("btrfs: convert data_seqcount to seqcount_mutex_t")
CC: stable@vger.kernel.org # 5.10
CC: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Su Yue <l@damenly.su>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-01-25 18:44:50 +01:00
Linus Torvalds
9791581c04 for-5.11-rc4-tag
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE8rQSAMVO+zA4DBdWxWXV+ddtWDsFAmAIojwACgkQxWXV+ddt
 WDstnw/+O0KSsK6ChZCNdjqFAgWL41RYj0fPOgM/8xlNaQyYHS0Jczeoud6m/2Wm
 U41kTb/a6xpmx0Z/2uf/5pDIBPFld/IUuUf/AdJsMzy8Bpky2/sfg6Kmx0tKGLXQ
 1WKp9ox0MlAUI0Tz/jGfX5rwsIgWKYKIF2iGUio/H1ktR3l+cXlmLWsSIB43F6VL
 AjKRRyFCNU//dV7syNMmmj9yU0HpSs53SpWxUIURuTFaE71LyUgzaxDTlZ6c/PET
 e4wdf8nl0wzEESCgSUPdh2AWNNiTEbbGhhhNi9250PUyQki2f4AGBlxVSLZH/fDn
 6PbBDvefW4umCMeMxxmgnYJU6tG78qg/LvxzZXt54rOtB0WMbrIl0u7hFCVhQ3Qk
 nqrS4tqeaL+OeuR6xamBMaRohgRFa9S+QVjTwtDFo/oVYH4TVvQDfKQS6GsWwDvB
 ySzz3WewoFqhe47cMsy28Dg49xkDSIJIr5hmSNGSXTreZ2JIa+qLKywoH87+YDIE
 ql0PN47z4NB+MbWDV7SZM8DCVqiQ7+1LOV9bPmqfvNl3YTfvXyMaoPLmWWVstPr2
 iyhXrvESgm1s2RCF1a0tXIkv82L6QYjJ3eeEDsvAmtKBouNL9BnMvwi3zW5yKiry
 m1qj7C7e6C1TivYitcCfbRCKqeAnUv8VwkSbW9BvNDe7i5AD++U=
 =gSYr
 -----END PGP SIGNATURE-----

Merge tag 'for-5.11-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:
 "A few more one line fixes for various bugs, stable material.

   - fix send when emitting clone operation from the same file and root

   - fix double free on error when cleaning backrefs

   - lockdep fix during relocation

   - handle potential error during reloc when starting transaction

   - skip running delayed refs during commit (leftover from code removal
     in this dev cycle)"

* tag 'for-5.11-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: don't clear ret in btrfs_start_dirty_block_groups
  btrfs: fix lockdep splat in btrfs_recover_relocation
  btrfs: do not double free backref nodes on error
  btrfs: don't get an EINTR during drop_snapshot for reloc
  btrfs: send: fix invalid clone operations when cloning from the same file and root
  btrfs: no need to run delayed refs after commit_fs_roots during commit
2021-01-20 14:15:33 -08:00
Josef Bacik
fb28610097 btrfs: fix lockdep splat in btrfs_recover_relocation
While testing the error paths of relocation I hit the following lockdep
splat:

  ======================================================
  WARNING: possible circular locking dependency detected
  5.10.0-rc6+ #217 Not tainted
  ------------------------------------------------------
  mount/779 is trying to acquire lock:
  ffffa0e676945418 (&fs_info->balance_mutex){+.+.}-{3:3}, at: btrfs_recover_balance+0x2f0/0x340

  but task is already holding lock:
  ffffa0e60ee31da8 (btrfs-root-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x27/0x100

  which lock already depends on the new lock.

  the existing dependency chain (in reverse order) is:

  -> #2 (btrfs-root-00){++++}-{3:3}:
	 down_read_nested+0x43/0x130
	 __btrfs_tree_read_lock+0x27/0x100
	 btrfs_read_lock_root_node+0x31/0x40
	 btrfs_search_slot+0x462/0x8f0
	 btrfs_update_root+0x55/0x2b0
	 btrfs_drop_snapshot+0x398/0x750
	 clean_dirty_subvols+0xdf/0x120
	 btrfs_recover_relocation+0x534/0x5a0
	 btrfs_start_pre_rw_mount+0xcb/0x170
	 open_ctree+0x151f/0x1726
	 btrfs_mount_root.cold+0x12/0xea
	 legacy_get_tree+0x30/0x50
	 vfs_get_tree+0x28/0xc0
	 vfs_kern_mount.part.0+0x71/0xb0
	 btrfs_mount+0x10d/0x380
	 legacy_get_tree+0x30/0x50
	 vfs_get_tree+0x28/0xc0
	 path_mount+0x433/0xc10
	 __x64_sys_mount+0xe3/0x120
	 do_syscall_64+0x33/0x40
	 entry_SYSCALL_64_after_hwframe+0x44/0xa9

  -> #1 (sb_internal#2){.+.+}-{0:0}:
	 start_transaction+0x444/0x700
	 insert_balance_item.isra.0+0x37/0x320
	 btrfs_balance+0x354/0xf40
	 btrfs_ioctl_balance+0x2cf/0x380
	 __x64_sys_ioctl+0x83/0xb0
	 do_syscall_64+0x33/0x40
	 entry_SYSCALL_64_after_hwframe+0x44/0xa9

  -> #0 (&fs_info->balance_mutex){+.+.}-{3:3}:
	 __lock_acquire+0x1120/0x1e10
	 lock_acquire+0x116/0x370
	 __mutex_lock+0x7e/0x7b0
	 btrfs_recover_balance+0x2f0/0x340
	 open_ctree+0x1095/0x1726
	 btrfs_mount_root.cold+0x12/0xea
	 legacy_get_tree+0x30/0x50
	 vfs_get_tree+0x28/0xc0
	 vfs_kern_mount.part.0+0x71/0xb0
	 btrfs_mount+0x10d/0x380
	 legacy_get_tree+0x30/0x50
	 vfs_get_tree+0x28/0xc0
	 path_mount+0x433/0xc10
	 __x64_sys_mount+0xe3/0x120
	 do_syscall_64+0x33/0x40
	 entry_SYSCALL_64_after_hwframe+0x44/0xa9

  other info that might help us debug this:

  Chain exists of:
    &fs_info->balance_mutex --> sb_internal#2 --> btrfs-root-00

   Possible unsafe locking scenario:

	 CPU0                    CPU1
	 ----                    ----
    lock(btrfs-root-00);
				 lock(sb_internal#2);
				 lock(btrfs-root-00);
    lock(&fs_info->balance_mutex);

   *** DEADLOCK ***

  2 locks held by mount/779:
   #0: ffffa0e60dc040e0 (&type->s_umount_key#47/1){+.+.}-{3:3}, at: alloc_super+0xb5/0x380
   #1: ffffa0e60ee31da8 (btrfs-root-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x27/0x100

  stack backtrace:
  CPU: 0 PID: 779 Comm: mount Not tainted 5.10.0-rc6+ #217
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
  Call Trace:
   dump_stack+0x8b/0xb0
   check_noncircular+0xcf/0xf0
   ? trace_call_bpf+0x139/0x260
   __lock_acquire+0x1120/0x1e10
   lock_acquire+0x116/0x370
   ? btrfs_recover_balance+0x2f0/0x340
   __mutex_lock+0x7e/0x7b0
   ? btrfs_recover_balance+0x2f0/0x340
   ? btrfs_recover_balance+0x2f0/0x340
   ? rcu_read_lock_sched_held+0x3f/0x80
   ? kmem_cache_alloc_trace+0x2c4/0x2f0
   ? btrfs_get_64+0x5e/0x100
   btrfs_recover_balance+0x2f0/0x340
   open_ctree+0x1095/0x1726
   btrfs_mount_root.cold+0x12/0xea
   ? rcu_read_lock_sched_held+0x3f/0x80
   legacy_get_tree+0x30/0x50
   vfs_get_tree+0x28/0xc0
   vfs_kern_mount.part.0+0x71/0xb0
   btrfs_mount+0x10d/0x380
   ? __kmalloc_track_caller+0x2f2/0x320
   legacy_get_tree+0x30/0x50
   vfs_get_tree+0x28/0xc0
   ? capable+0x3a/0x60
   path_mount+0x433/0xc10
   __x64_sys_mount+0xe3/0x120
   do_syscall_64+0x33/0x40
   entry_SYSCALL_64_after_hwframe+0x44/0xa9

This is straightforward to fix, simply release the path before we setup
the balance_ctl.

CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-01-18 15:44:59 +01:00
Linus Torvalds
71c061d244 for-5.11-rc2-tag
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE8rQSAMVO+zA4DBdWxWXV+ddtWDsFAl/0cI8ACgkQxWXV+ddt
 WDspQw/8DcC8zhGgunk0m2kcXd6dFOGbsr3hNGCsgUSKESRw6AgTZ0rJf/QLjayF
 /vaJWzQW9ijfZ92fWZS+mrmskk0N8RFOsEvkCRLesgRaasbrkchLBo5HGQasOBEV
 LXyU878GrBkNaHzClJz+JdU26i0d17BFdddgtZVQ1St9Wd9ecc7Q6iqG80RWFeE7
 uVbhv+QjocM3EieOnwIy5Mz6jZgJLYwqw7/y2njKduBeJtbt1K1j/y7IJk0WFMUM
 8eUpDL6vlAHB8FjV2wWOzO46bbEaUpaBADM6yabrq0lnM0kr7Rb+WV/WSLM/AZ3g
 Hzs4qROOEP+zjfZ5nYjJQDJRMpSipZomsUY5uMZnhRxlZuHPaoBotRRzs5AIZYj2
 BnkfucOcjxS/JTBD//ltJXE8RxbMIyMBBBipbBwqmxOkR9gM9BPuJ6iJPfUX//gG
 1GHJ+FPns8ua3JW21ih6H31xNEPS36tsywvE8yCEtEWMxCFCBwgGu+4D8KpGBjtY
 ySFxkxxAbTuFi9fqSE/mBC+6lpbVTO0OvizuoEQh8C2izkXRbDsDVgPN8d7rCW7h
 Cdox4DUp61sNf+G3ll9Dv9ceAXroZTVRTHGjlav6NAFpydz3yPo5x54Ex7S+k3oN
 BAcZEl1Tl3hz4WxF8Ywc+yJ8n8l9AVa3KcYRXVbyVjTGg+JjU94=
 =jlQf
 -----END PGP SIGNATURE-----

Merge tag 'for-5.11-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:
 "A few more fixes that arrived before the end of the year:

   - a bunch of fixes related to transaction handle lifetime wrt various
     operations (umount, remount, qgroup scan, orphan cleanup)

   - async discard scheduling fixes

   - fix item size calculation when item keys collide for extend refs
     (hardlinks)

   - fix qgroup flushing from running transaction

   - fix send, wrong file path when there is an inode with a pending
     rmdir

   - fix deadlock when cloning inline extent and low on free metadata
     space"

* tag 'for-5.11-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: run delayed iputs when remounting RO to avoid leaking them
  btrfs: add assertion for empty list of transactions at late stage of umount
  btrfs: fix race between RO remount and the cleaner task
  btrfs: fix transaction leak and crash after cleaning up orphans on RO mount
  btrfs: fix transaction leak and crash after RO remount caused by qgroup rescan
  btrfs: merge critical sections of discard lock in workfn
  btrfs: fix racy access to discard_ctl data
  btrfs: fix async discard stall
  btrfs: tests: initialize test inodes location
  btrfs: send: fix wrong file path when there is an inode with a pending rmdir
  btrfs: qgroup: don't try to wait flushing if we're already holding a transaction
  btrfs: correctly calculate item size used when item key collision happens
  btrfs: fix deadlock when cloning inline extent and low on free metadata space
2021-01-06 11:19:08 -08:00
Filipe Manana
a0a1db70df btrfs: fix race between RO remount and the cleaner task
When we are remounting a filesystem in RO mode we can race with the cleaner
task and result in leaking a transaction if the filesystem is unmounted
shortly after, before the transaction kthread had a chance to commit that
transaction. That also results in a crash during unmount, due to a
use-after-free, if hardware acceleration is not available for crc32c.

The following sequence of steps explains how the race happens.

1) The filesystem is mounted in RW mode and the cleaner task is running.
   This means that currently BTRFS_FS_CLEANER_RUNNING is set at
   fs_info->flags;

2) The cleaner task is currently running delayed iputs for example;

3) A filesystem RO remount operation starts;

4) The RO remount task calls btrfs_commit_super(), which commits any
   currently open transaction, and it finishes;

5) At this point the cleaner task is still running and it creates a new
   transaction by doing one of the following things:

   * When running the delayed iput() for an inode with a 0 link count,
     in which case at btrfs_evict_inode() we start a transaction through
     the call to evict_refill_and_join(), use it and then release its
     handle through btrfs_end_transaction();

   * When deleting a dead root through btrfs_clean_one_deleted_snapshot(),
     a transaction is started at btrfs_drop_snapshot() and then its handle
     is released through a call to btrfs_end_transaction_throttle();

   * When the remount task was still running, and before the remount task
     called btrfs_delete_unused_bgs(), the cleaner task also called
     btrfs_delete_unused_bgs() and it picked and removed one block group
     from the list of unused block groups. Before the cleaner task started
     a transaction, through btrfs_start_trans_remove_block_group() at
     btrfs_delete_unused_bgs(), the remount task had already called
     btrfs_commit_super();

6) So at this point the filesystem is in RO mode and we have an open
   transaction that was started by the cleaner task;

7) Shortly after a filesystem unmount operation starts. At close_ctree()
   we stop the transaction kthread before it had a chance to commit the
   transaction, since less than 30 seconds (the default commit interval)
   have elapsed since the last transaction was committed;

8) We end up calling iput() against the btree inode at close_ctree() while
   there is an open transaction, and since that transaction was used to
   update btrees by the cleaner, we have dirty pages in the btree inode
   due to COW operations on metadata extents, and therefore writeback is
   triggered for the btree inode.

   So btree_write_cache_pages() is invoked to flush those dirty pages
   during the final iput() on the btree inode. This results in creating a
   bio and submitting it, which makes us end up at
   btrfs_submit_metadata_bio();

9) At btrfs_submit_metadata_bio() we end up at the if-then-else branch
   that calls btrfs_wq_submit_bio(), because check_async_write() returned
   a value of 1. This value of 1 is because we did not have hardware
   acceleration available for crc32c, so BTRFS_FS_CSUM_IMPL_FAST was not
   set in fs_info->flags;

10) Then at btrfs_wq_submit_bio() we call btrfs_queue_work() against the
    workqueue at fs_info->workers, which was already freed before by the
    call to btrfs_stop_all_workers() at close_ctree(). This results in an
    invalid memory access due to a use-after-free, leading to a crash.

When this happens, before the crash there are several warnings triggered,
since we have reserved metadata space in a block group, the delayed refs
reservation, etc:

  ------------[ cut here ]------------
  WARNING: CPU: 4 PID: 1729896 at fs/btrfs/block-group.c:125 btrfs_put_block_group+0x63/0xa0 [btrfs]
  Modules linked in: btrfs dm_snapshot dm_thin_pool (...)
  CPU: 4 PID: 1729896 Comm: umount Tainted: G    B   W         5.10.0-rc4-btrfs-next-73 #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
  RIP: 0010:btrfs_put_block_group+0x63/0xa0 [btrfs]
  Code: f0 01 00 00 48 39 c2 75 (...)
  RSP: 0018:ffffb270826bbdd8 EFLAGS: 00010206
  RAX: 0000000000000001 RBX: ffff947ed73e4000 RCX: ffff947ebc8b29c8
  RDX: 0000000000000001 RSI: ffffffffc0b150a0 RDI: ffff947ebc8b2800
  RBP: ffff947ebc8b2800 R08: 0000000000000000 R09: 0000000000000000
  R10: 0000000000000000 R11: 0000000000000001 R12: ffff947ed73e4110
  R13: ffff947ed73e4160 R14: ffff947ebc8b2988 R15: dead000000000100
  FS:  00007f15edfea840(0000) GS:ffff9481ad600000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007f37e2893320 CR3: 0000000138f68001 CR4: 00000000003706e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   btrfs_free_block_groups+0x17f/0x2f0 [btrfs]
   close_ctree+0x2ba/0x2fa [btrfs]
   generic_shutdown_super+0x6c/0x100
   kill_anon_super+0x14/0x30
   btrfs_kill_super+0x12/0x20 [btrfs]
   deactivate_locked_super+0x31/0x70
   cleanup_mnt+0x100/0x160
   task_work_run+0x68/0xb0
   exit_to_user_mode_prepare+0x1bb/0x1c0
   syscall_exit_to_user_mode+0x4b/0x260
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7f15ee221ee7
  Code: ff 0b 00 f7 d8 64 89 01 48 (...)
  RSP: 002b:00007ffe9470f0f8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
  RAX: 0000000000000000 RBX: 00007f15ee347264 RCX: 00007f15ee221ee7
  RDX: ffffffffffffff78 RSI: 0000000000000000 RDI: 000056169701d000
  RBP: 0000561697018a30 R08: 0000000000000000 R09: 00007f15ee2e2be0
  R10: 000056169701efe0 R11: 0000000000000246 R12: 0000000000000000
  R13: 000056169701d000 R14: 0000561697018b40 R15: 0000561697018c60
  irq event stamp: 0
  hardirqs last  enabled at (0): [<0000000000000000>] 0x0
  hardirqs last disabled at (0): [<ffffffff8bcae560>] copy_process+0x8a0/0x1d70
  softirqs last  enabled at (0): [<ffffffff8bcae560>] copy_process+0x8a0/0x1d70
  softirqs last disabled at (0): [<0000000000000000>] 0x0
  ---[ end trace dd74718fef1ed5c6 ]---
  ------------[ cut here ]------------
  WARNING: CPU: 2 PID: 1729896 at fs/btrfs/block-rsv.c:459 btrfs_release_global_block_rsv+0x70/0xc0 [btrfs]
  Modules linked in: btrfs dm_snapshot dm_thin_pool (...)
  CPU: 2 PID: 1729896 Comm: umount Tainted: G    B   W         5.10.0-rc4-btrfs-next-73 #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
  RIP: 0010:btrfs_release_global_block_rsv+0x70/0xc0 [btrfs]
  Code: 48 83 bb b0 03 00 00 00 (...)
  RSP: 0018:ffffb270826bbdd8 EFLAGS: 00010206
  RAX: 000000000033c000 RBX: ffff947ed73e4000 RCX: 0000000000000000
  RDX: 0000000000000001 RSI: ffffffffc0b0d8c1 RDI: 00000000ffffffff
  RBP: ffff947ebc8b7000 R08: 0000000000000001 R09: 0000000000000000
  R10: 0000000000000000 R11: 0000000000000001 R12: ffff947ed73e4110
  R13: ffff947ed73e5278 R14: dead000000000122 R15: dead000000000100
  FS:  00007f15edfea840(0000) GS:ffff9481aca00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000561a79f76e20 CR3: 0000000138f68006 CR4: 00000000003706e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   btrfs_free_block_groups+0x24c/0x2f0 [btrfs]
   close_ctree+0x2ba/0x2fa [btrfs]
   generic_shutdown_super+0x6c/0x100
   kill_anon_super+0x14/0x30
   btrfs_kill_super+0x12/0x20 [btrfs]
   deactivate_locked_super+0x31/0x70
   cleanup_mnt+0x100/0x160
   task_work_run+0x68/0xb0
   exit_to_user_mode_prepare+0x1bb/0x1c0
   syscall_exit_to_user_mode+0x4b/0x260
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7f15ee221ee7
  Code: ff 0b 00 f7 d8 64 89 01 (...)
  RSP: 002b:00007ffe9470f0f8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
  RAX: 0000000000000000 RBX: 00007f15ee347264 RCX: 00007f15ee221ee7
  RDX: ffffffffffffff78 RSI: 0000000000000000 RDI: 000056169701d000
  RBP: 0000561697018a30 R08: 0000000000000000 R09: 00007f15ee2e2be0
  R10: 000056169701efe0 R11: 0000000000000246 R12: 0000000000000000
  R13: 000056169701d000 R14: 0000561697018b40 R15: 0000561697018c60
  irq event stamp: 0
  hardirqs last  enabled at (0): [<0000000000000000>] 0x0
  hardirqs last disabled at (0): [<ffffffff8bcae560>] copy_process+0x8a0/0x1d70
  softirqs last  enabled at (0): [<ffffffff8bcae560>] copy_process+0x8a0/0x1d70
  softirqs last disabled at (0): [<0000000000000000>] 0x0
  ---[ end trace dd74718fef1ed5c7 ]---
  ------------[ cut here ]------------
  WARNING: CPU: 2 PID: 1729896 at fs/btrfs/block-group.c:3377 btrfs_free_block_groups+0x25d/0x2f0 [btrfs]
  Modules linked in: btrfs dm_snapshot dm_thin_pool (...)
  CPU: 5 PID: 1729896 Comm: umount Tainted: G    B   W         5.10.0-rc4-btrfs-next-73 #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
  RIP: 0010:btrfs_free_block_groups+0x25d/0x2f0 [btrfs]
  Code: ad de 49 be 22 01 00 (...)
  RSP: 0018:ffffb270826bbde8 EFLAGS: 00010206
  RAX: ffff947ebeae1d08 RBX: ffff947ed73e4000 RCX: 0000000000000000
  RDX: 0000000000000001 RSI: ffff947e9d823ae8 RDI: 0000000000000246
  RBP: ffff947ebeae1d08 R08: 0000000000000000 R09: 0000000000000000
  R10: 0000000000000000 R11: 0000000000000001 R12: ffff947ebeae1c00
  R13: ffff947ed73e5278 R14: dead000000000122 R15: dead000000000100
  FS:  00007f15edfea840(0000) GS:ffff9481ad200000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007f1475d98ea8 CR3: 0000000138f68005 CR4: 00000000003706e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   close_ctree+0x2ba/0x2fa [btrfs]
   generic_shutdown_super+0x6c/0x100
   kill_anon_super+0x14/0x30
   btrfs_kill_super+0x12/0x20 [btrfs]
   deactivate_locked_super+0x31/0x70
   cleanup_mnt+0x100/0x160
   task_work_run+0x68/0xb0
   exit_to_user_mode_prepare+0x1bb/0x1c0
   syscall_exit_to_user_mode+0x4b/0x260
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7f15ee221ee7
  Code: ff 0b 00 f7 d8 64 89 (...)
  RSP: 002b:00007ffe9470f0f8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
  RAX: 0000000000000000 RBX: 00007f15ee347264 RCX: 00007f15ee221ee7
  RDX: ffffffffffffff78 RSI: 0000000000000000 RDI: 000056169701d000
  RBP: 0000561697018a30 R08: 0000000000000000 R09: 00007f15ee2e2be0
  R10: 000056169701efe0 R11: 0000000000000246 R12: 0000000000000000
  R13: 000056169701d000 R14: 0000561697018b40 R15: 0000561697018c60
  irq event stamp: 0
  hardirqs last  enabled at (0): [<0000000000000000>] 0x0
  hardirqs last disabled at (0): [<ffffffff8bcae560>] copy_process+0x8a0/0x1d70
  softirqs last  enabled at (0): [<ffffffff8bcae560>] copy_process+0x8a0/0x1d70
  softirqs last disabled at (0): [<0000000000000000>] 0x0
  ---[ end trace dd74718fef1ed5c8 ]---
  BTRFS info (device sdc): space_info 4 has 268238848 free, is not full
  BTRFS info (device sdc): space_info total=268435456, used=114688, pinned=0, reserved=16384, may_use=0, readonly=65536
  BTRFS info (device sdc): global_block_rsv: size 0 reserved 0
  BTRFS info (device sdc): trans_block_rsv: size 0 reserved 0
  BTRFS info (device sdc): chunk_block_rsv: size 0 reserved 0
  BTRFS info (device sdc): delayed_block_rsv: size 0 reserved 0
  BTRFS info (device sdc): delayed_refs_rsv: size 524288 reserved 0

And the crash, which only happens when we do not have crc32c hardware
acceleration, produces the following trace immediately after those
warnings:

  stack segment: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI
  CPU: 2 PID: 1749129 Comm: umount Tainted: G    B   W         5.10.0-rc4-btrfs-next-73 #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
  RIP: 0010:btrfs_queue_work+0x36/0x190 [btrfs]
  Code: 54 55 53 48 89 f3 (...)
  RSP: 0018:ffffb27082443ae8 EFLAGS: 00010282
  RAX: 0000000000000004 RBX: ffff94810ee9ad90 RCX: 0000000000000000
  RDX: 0000000000000001 RSI: ffff94810ee9ad90 RDI: ffff947ed8ee75a0
  RBP: a56b6b6b6b6b6b6b R08: 0000000000000000 R09: 0000000000000000
  R10: 0000000000000007 R11: 0000000000000001 R12: ffff947fa9b435a8
  R13: ffff94810ee9ad90 R14: 0000000000000000 R15: ffff947e93dc0000
  FS:  00007f3cfe974840(0000) GS:ffff9481ac600000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007f1b42995a70 CR3: 0000000127638003 CR4: 00000000003706e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   btrfs_wq_submit_bio+0xb3/0xd0 [btrfs]
   btrfs_submit_metadata_bio+0x44/0xc0 [btrfs]
   submit_one_bio+0x61/0x70 [btrfs]
   btree_write_cache_pages+0x414/0x450 [btrfs]
   ? kobject_put+0x9a/0x1d0
   ? trace_hardirqs_on+0x1b/0xf0
   ? _raw_spin_unlock_irqrestore+0x3c/0x60
   ? free_debug_processing+0x1e1/0x2b0
   do_writepages+0x43/0xe0
   ? lock_acquired+0x199/0x490
   __writeback_single_inode+0x59/0x650
   writeback_single_inode+0xaf/0x120
   write_inode_now+0x94/0xd0
   iput+0x187/0x2b0
   close_ctree+0x2c6/0x2fa [btrfs]
   generic_shutdown_super+0x6c/0x100
   kill_anon_super+0x14/0x30
   btrfs_kill_super+0x12/0x20 [btrfs]
   deactivate_locked_super+0x31/0x70
   cleanup_mnt+0x100/0x160
   task_work_run+0x68/0xb0
   exit_to_user_mode_prepare+0x1bb/0x1c0
   syscall_exit_to_user_mode+0x4b/0x260
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7f3cfebabee7
  Code: ff 0b 00 f7 d8 64 89 01 (...)
  RSP: 002b:00007ffc9c9a05f8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
  RAX: 0000000000000000 RBX: 00007f3cfecd1264 RCX: 00007f3cfebabee7
  RDX: ffffffffffffff78 RSI: 0000000000000000 RDI: 0000562b6b478000
  RBP: 0000562b6b473a30 R08: 0000000000000000 R09: 00007f3cfec6cbe0
  R10: 0000562b6b479fe0 R11: 0000000000000246 R12: 0000000000000000
  R13: 0000562b6b478000 R14: 0000562b6b473b40 R15: 0000562b6b473c60
  Modules linked in: btrfs dm_snapshot dm_thin_pool (...)
  ---[ end trace dd74718fef1ed5cc ]---

Finally when we remove the btrfs module (rmmod btrfs), there are several
warnings about objects that were allocated from our slabs but were never
freed, consequence of the transaction that was never committed and got
leaked:

  =============================================================================
  BUG btrfs_delayed_ref_head (Tainted: G    B   W        ): Objects remaining in btrfs_delayed_ref_head on __kmem_cache_shutdown()
  -----------------------------------------------------------------------------

  INFO: Slab 0x0000000094c2ae56 objects=24 used=2 fp=0x000000002bfa2521 flags=0x17fffc000010200
  CPU: 5 PID: 1729921 Comm: rmmod Tainted: G    B   W         5.10.0-rc4-btrfs-next-73 #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
  Call Trace:
   dump_stack+0x8d/0xb5
   slab_err+0xb7/0xdc
   ? lock_acquired+0x199/0x490
   __kmem_cache_shutdown+0x1ac/0x3c0
   ? lock_release+0x20e/0x4c0
   kmem_cache_destroy+0x55/0x120
   btrfs_delayed_ref_exit+0x11/0x35 [btrfs]
   exit_btrfs_fs+0xa/0x59 [btrfs]
   __x64_sys_delete_module+0x194/0x260
   ? fpregs_assert_state_consistent+0x1e/0x40
   ? exit_to_user_mode_prepare+0x55/0x1c0
   ? trace_hardirqs_on+0x1b/0xf0
   do_syscall_64+0x33/0x80
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7f693e305897
  Code: 73 01 c3 48 8b 0d f9 f5 (...)
  RSP: 002b:00007ffcf73eb508 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
  RAX: ffffffffffffffda RBX: 0000559df504f760 RCX: 00007f693e305897
  RDX: 000000000000000a RSI: 0000000000000800 RDI: 0000559df504f7c8
  RBP: 00007ffcf73eb568 R08: 0000000000000000 R09: 0000000000000000
  R10: 00007f693e378ac0 R11: 0000000000000206 R12: 00007ffcf73eb740
  R13: 00007ffcf73ec5a6 R14: 0000559df504f2a0 R15: 0000559df504f760
  INFO: Object 0x0000000050cbdd61 @offset=12104
  INFO: Allocated in btrfs_add_delayed_tree_ref+0xbb/0x480 [btrfs] age=1894 cpu=6 pid=1729873
        __slab_alloc.isra.0+0x109/0x1c0
        kmem_cache_alloc+0x7bb/0x830
        btrfs_add_delayed_tree_ref+0xbb/0x480 [btrfs]
        btrfs_free_tree_block+0x128/0x360 [btrfs]
        __btrfs_cow_block+0x489/0x5f0 [btrfs]
        btrfs_cow_block+0xf7/0x220 [btrfs]
        btrfs_search_slot+0x62a/0xc40 [btrfs]
        btrfs_del_orphan_item+0x65/0xd0 [btrfs]
        btrfs_find_orphan_roots+0x1bf/0x200 [btrfs]
        open_ctree+0x125a/0x18a0 [btrfs]
        btrfs_mount_root.cold+0x13/0xed [btrfs]
        legacy_get_tree+0x30/0x60
        vfs_get_tree+0x28/0xe0
        fc_mount+0xe/0x40
        vfs_kern_mount.part.0+0x71/0x90
        btrfs_mount+0x13b/0x3e0 [btrfs]
  INFO: Freed in __btrfs_run_delayed_refs+0x1117/0x1290 [btrfs] age=4292 cpu=2 pid=1729526
        kmem_cache_free+0x34c/0x3c0
        __btrfs_run_delayed_refs+0x1117/0x1290 [btrfs]
        btrfs_run_delayed_refs+0x81/0x210 [btrfs]
        commit_cowonly_roots+0xfb/0x300 [btrfs]
        btrfs_commit_transaction+0x367/0xc40 [btrfs]
        sync_filesystem+0x74/0x90
        generic_shutdown_super+0x22/0x100
        kill_anon_super+0x14/0x30
        btrfs_kill_super+0x12/0x20 [btrfs]
        deactivate_locked_super+0x31/0x70
        cleanup_mnt+0x100/0x160
        task_work_run+0x68/0xb0
        exit_to_user_mode_prepare+0x1bb/0x1c0
        syscall_exit_to_user_mode+0x4b/0x260
        entry_SYSCALL_64_after_hwframe+0x44/0xa9
  INFO: Object 0x0000000086e9b0ff @offset=12776
  INFO: Allocated in btrfs_add_delayed_tree_ref+0xbb/0x480 [btrfs] age=1900 cpu=6 pid=1729873
        __slab_alloc.isra.0+0x109/0x1c0
        kmem_cache_alloc+0x7bb/0x830
        btrfs_add_delayed_tree_ref+0xbb/0x480 [btrfs]
        btrfs_alloc_tree_block+0x2bf/0x360 [btrfs]
        alloc_tree_block_no_bg_flush+0x4f/0x60 [btrfs]
        __btrfs_cow_block+0x12d/0x5f0 [btrfs]
        btrfs_cow_block+0xf7/0x220 [btrfs]
        btrfs_search_slot+0x62a/0xc40 [btrfs]
        btrfs_del_orphan_item+0x65/0xd0 [btrfs]
        btrfs_find_orphan_roots+0x1bf/0x200 [btrfs]
        open_ctree+0x125a/0x18a0 [btrfs]
        btrfs_mount_root.cold+0x13/0xed [btrfs]
        legacy_get_tree+0x30/0x60
        vfs_get_tree+0x28/0xe0
        fc_mount+0xe/0x40
        vfs_kern_mount.part.0+0x71/0x90
  INFO: Freed in __btrfs_run_delayed_refs+0x1117/0x1290 [btrfs] age=3141 cpu=6 pid=1729803
        kmem_cache_free+0x34c/0x3c0
        __btrfs_run_delayed_refs+0x1117/0x1290 [btrfs]
        btrfs_run_delayed_refs+0x81/0x210 [btrfs]
        btrfs_write_dirty_block_groups+0x17d/0x3d0 [btrfs]
        commit_cowonly_roots+0x248/0x300 [btrfs]
        btrfs_commit_transaction+0x367/0xc40 [btrfs]
        close_ctree+0x113/0x2fa [btrfs]
        generic_shutdown_super+0x6c/0x100
        kill_anon_super+0x14/0x30
        btrfs_kill_super+0x12/0x20 [btrfs]
        deactivate_locked_super+0x31/0x70
        cleanup_mnt+0x100/0x160
        task_work_run+0x68/0xb0
        exit_to_user_mode_prepare+0x1bb/0x1c0
        syscall_exit_to_user_mode+0x4b/0x260
        entry_SYSCALL_64_after_hwframe+0x44/0xa9
  kmem_cache_destroy btrfs_delayed_ref_head: Slab cache still has objects
  CPU: 5 PID: 1729921 Comm: rmmod Tainted: G    B   W         5.10.0-rc4-btrfs-next-73 #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
  Call Trace:
   dump_stack+0x8d/0xb5
   kmem_cache_destroy+0x119/0x120
   btrfs_delayed_ref_exit+0x11/0x35 [btrfs]
   exit_btrfs_fs+0xa/0x59 [btrfs]
   __x64_sys_delete_module+0x194/0x260
   ? fpregs_assert_state_consistent+0x1e/0x40
   ? exit_to_user_mode_prepare+0x55/0x1c0
   ? trace_hardirqs_on+0x1b/0xf0
   do_syscall_64+0x33/0x80
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7f693e305897
  Code: 73 01 c3 48 8b 0d f9 f5 0b (...)
  RSP: 002b:00007ffcf73eb508 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
  RAX: ffffffffffffffda RBX: 0000559df504f760 RCX: 00007f693e305897
  RDX: 000000000000000a RSI: 0000000000000800 RDI: 0000559df504f7c8
  RBP: 00007ffcf73eb568 R08: 0000000000000000 R09: 0000000000000000
  R10: 00007f693e378ac0 R11: 0000000000000206 R12: 00007ffcf73eb740
  R13: 00007ffcf73ec5a6 R14: 0000559df504f2a0 R15: 0000559df504f760
  =============================================================================
  BUG btrfs_delayed_tree_ref (Tainted: G    B   W        ): Objects remaining in btrfs_delayed_tree_ref on __kmem_cache_shutdown()
  -----------------------------------------------------------------------------

  INFO: Slab 0x0000000011f78dc0 objects=37 used=2 fp=0x0000000032d55d91 flags=0x17fffc000010200
  CPU: 3 PID: 1729921 Comm: rmmod Tainted: G    B   W         5.10.0-rc4-btrfs-next-73 #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
  Call Trace:
   dump_stack+0x8d/0xb5
   slab_err+0xb7/0xdc
   ? lock_acquired+0x199/0x490
   __kmem_cache_shutdown+0x1ac/0x3c0
   ? lock_release+0x20e/0x4c0
   kmem_cache_destroy+0x55/0x120
   btrfs_delayed_ref_exit+0x1d/0x35 [btrfs]
   exit_btrfs_fs+0xa/0x59 [btrfs]
   __x64_sys_delete_module+0x194/0x260
   ? fpregs_assert_state_consistent+0x1e/0x40
   ? exit_to_user_mode_prepare+0x55/0x1c0
   ? trace_hardirqs_on+0x1b/0xf0
   do_syscall_64+0x33/0x80
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7f693e305897
  Code: 73 01 c3 48 8b 0d f9 f5 (...)
  RSP: 002b:00007ffcf73eb508 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
  RAX: ffffffffffffffda RBX: 0000559df504f760 RCX: 00007f693e305897
  RDX: 000000000000000a RSI: 0000000000000800 RDI: 0000559df504f7c8
  RBP: 00007ffcf73eb568 R08: 0000000000000000 R09: 0000000000000000
  R10: 00007f693e378ac0 R11: 0000000000000206 R12: 00007ffcf73eb740
  R13: 00007ffcf73ec5a6 R14: 0000559df504f2a0 R15: 0000559df504f760
  INFO: Object 0x000000001a340018 @offset=4408
  INFO: Allocated in btrfs_add_delayed_tree_ref+0x9e/0x480 [btrfs] age=1917 cpu=6 pid=1729873
        __slab_alloc.isra.0+0x109/0x1c0
        kmem_cache_alloc+0x7bb/0x830
        btrfs_add_delayed_tree_ref+0x9e/0x480 [btrfs]
        btrfs_free_tree_block+0x128/0x360 [btrfs]
        __btrfs_cow_block+0x489/0x5f0 [btrfs]
        btrfs_cow_block+0xf7/0x220 [btrfs]
        btrfs_search_slot+0x62a/0xc40 [btrfs]
        btrfs_del_orphan_item+0x65/0xd0 [btrfs]
        btrfs_find_orphan_roots+0x1bf/0x200 [btrfs]
        open_ctree+0x125a/0x18a0 [btrfs]
        btrfs_mount_root.cold+0x13/0xed [btrfs]
        legacy_get_tree+0x30/0x60
        vfs_get_tree+0x28/0xe0
        fc_mount+0xe/0x40
        vfs_kern_mount.part.0+0x71/0x90
        btrfs_mount+0x13b/0x3e0 [btrfs]
  INFO: Freed in __btrfs_run_delayed_refs+0x63d/0x1290 [btrfs] age=4167 cpu=4 pid=1729795
        kmem_cache_free+0x34c/0x3c0
        __btrfs_run_delayed_refs+0x63d/0x1290 [btrfs]
        btrfs_run_delayed_refs+0x81/0x210 [btrfs]
        btrfs_commit_transaction+0x60/0xc40 [btrfs]
        create_subvol+0x56a/0x990 [btrfs]
        btrfs_mksubvol+0x3fb/0x4a0 [btrfs]
        __btrfs_ioctl_snap_create+0x119/0x1a0 [btrfs]
        btrfs_ioctl_snap_create+0x58/0x80 [btrfs]
        btrfs_ioctl+0x1a92/0x36f0 [btrfs]
        __x64_sys_ioctl+0x83/0xb0
        do_syscall_64+0x33/0x80
        entry_SYSCALL_64_after_hwframe+0x44/0xa9
  INFO: Object 0x000000002b46292a @offset=13648
  INFO: Allocated in btrfs_add_delayed_tree_ref+0x9e/0x480 [btrfs] age=1923 cpu=6 pid=1729873
        __slab_alloc.isra.0+0x109/0x1c0
        kmem_cache_alloc+0x7bb/0x830
        btrfs_add_delayed_tree_ref+0x9e/0x480 [btrfs]
        btrfs_alloc_tree_block+0x2bf/0x360 [btrfs]
        alloc_tree_block_no_bg_flush+0x4f/0x60 [btrfs]
        __btrfs_cow_block+0x12d/0x5f0 [btrfs]
        btrfs_cow_block+0xf7/0x220 [btrfs]
        btrfs_search_slot+0x62a/0xc40 [btrfs]
        btrfs_del_orphan_item+0x65/0xd0 [btrfs]
        btrfs_find_orphan_roots+0x1bf/0x200 [btrfs]
        open_ctree+0x125a/0x18a0 [btrfs]
        btrfs_mount_root.cold+0x13/0xed [btrfs]
        legacy_get_tree+0x30/0x60
        vfs_get_tree+0x28/0xe0
        fc_mount+0xe/0x40
        vfs_kern_mount.part.0+0x71/0x90
  INFO: Freed in __btrfs_run_delayed_refs+0x63d/0x1290 [btrfs] age=3164 cpu=6 pid=1729803
        kmem_cache_free+0x34c/0x3c0
        __btrfs_run_delayed_refs+0x63d/0x1290 [btrfs]
        btrfs_run_delayed_refs+0x81/0x210 [btrfs]
        commit_cowonly_roots+0xfb/0x300 [btrfs]
        btrfs_commit_transaction+0x367/0xc40 [btrfs]
        close_ctree+0x113/0x2fa [btrfs]
        generic_shutdown_super+0x6c/0x100
        kill_anon_super+0x14/0x30
        btrfs_kill_super+0x12/0x20 [btrfs]
        deactivate_locked_super+0x31/0x70
        cleanup_mnt+0x100/0x160
        task_work_run+0x68/0xb0
        exit_to_user_mode_prepare+0x1bb/0x1c0
        syscall_exit_to_user_mode+0x4b/0x260
        entry_SYSCALL_64_after_hwframe+0x44/0xa9
  kmem_cache_destroy btrfs_delayed_tree_ref: Slab cache still has objects
  CPU: 5 PID: 1729921 Comm: rmmod Tainted: G    B   W         5.10.0-rc4-btrfs-next-73 #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
  Call Trace:
   dump_stack+0x8d/0xb5
   kmem_cache_destroy+0x119/0x120
   btrfs_delayed_ref_exit+0x1d/0x35 [btrfs]
   exit_btrfs_fs+0xa/0x59 [btrfs]
   __x64_sys_delete_module+0x194/0x260
   ? fpregs_assert_state_consistent+0x1e/0x40
   ? exit_to_user_mode_prepare+0x55/0x1c0
   ? trace_hardirqs_on+0x1b/0xf0
   do_syscall_64+0x33/0x80
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7f693e305897
  Code: 73 01 c3 48 8b 0d f9 f5 (...)
  RSP: 002b:00007ffcf73eb508 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
  RAX: ffffffffffffffda RBX: 0000559df504f760 RCX: 00007f693e305897
  RDX: 000000000000000a RSI: 0000000000000800 RDI: 0000559df504f7c8
  RBP: 00007ffcf73eb568 R08: 0000000000000000 R09: 0000000000000000
  R10: 00007f693e378ac0 R11: 0000000000000206 R12: 00007ffcf73eb740
  R13: 00007ffcf73ec5a6 R14: 0000559df504f2a0 R15: 0000559df504f760
  =============================================================================
  BUG btrfs_delayed_extent_op (Tainted: G    B   W        ): Objects remaining in btrfs_delayed_extent_op on __kmem_cache_shutdown()
  -----------------------------------------------------------------------------
  INFO: Slab 0x00000000f145ce2f objects=22 used=1 fp=0x00000000af0f92cf flags=0x17fffc000010200
  CPU: 5 PID: 1729921 Comm: rmmod Tainted: G    B   W         5.10.0-rc4-btrfs-next-73 #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
  Call Trace:
   dump_stack+0x8d/0xb5
   slab_err+0xb7/0xdc
   ? lock_acquired+0x199/0x490
   __kmem_cache_shutdown+0x1ac/0x3c0
   ? __mutex_unlock_slowpath+0x45/0x2a0
   kmem_cache_destroy+0x55/0x120
   exit_btrfs_fs+0xa/0x59 [btrfs]
   __x64_sys_delete_module+0x194/0x260
   ? fpregs_assert_state_consistent+0x1e/0x40
   ? exit_to_user_mode_prepare+0x55/0x1c0
   ? trace_hardirqs_on+0x1b/0xf0
   do_syscall_64+0x33/0x80
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7f693e305897
  Code: 73 01 c3 48 8b 0d f9 f5 (...)
  RSP: 002b:00007ffcf73eb508 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
  RAX: ffffffffffffffda RBX: 0000559df504f760 RCX: 00007f693e305897
  RDX: 000000000000000a RSI: 0000000000000800 RDI: 0000559df504f7c8
  RBP: 00007ffcf73eb568 R08: 0000000000000000 R09: 0000000000000000
  R10: 00007f693e378ac0 R11: 0000000000000206 R12: 00007ffcf73eb740
  R13: 00007ffcf73ec5a6 R14: 0000559df504f2a0 R15: 0000559df504f760
  INFO: Object 0x000000004cf95ea8 @offset=6264
  INFO: Allocated in btrfs_alloc_tree_block+0x1e0/0x360 [btrfs] age=1931 cpu=6 pid=1729873
        __slab_alloc.isra.0+0x109/0x1c0
        kmem_cache_alloc+0x7bb/0x830
        btrfs_alloc_tree_block+0x1e0/0x360 [btrfs]
        alloc_tree_block_no_bg_flush+0x4f/0x60 [btrfs]
        __btrfs_cow_block+0x12d/0x5f0 [btrfs]
        btrfs_cow_block+0xf7/0x220 [btrfs]
        btrfs_search_slot+0x62a/0xc40 [btrfs]
        btrfs_del_orphan_item+0x65/0xd0 [btrfs]
        btrfs_find_orphan_roots+0x1bf/0x200 [btrfs]
        open_ctree+0x125a/0x18a0 [btrfs]
        btrfs_mount_root.cold+0x13/0xed [btrfs]
        legacy_get_tree+0x30/0x60
        vfs_get_tree+0x28/0xe0
        fc_mount+0xe/0x40
        vfs_kern_mount.part.0+0x71/0x90
        btrfs_mount+0x13b/0x3e0 [btrfs]
  INFO: Freed in __btrfs_run_delayed_refs+0xabd/0x1290 [btrfs] age=3173 cpu=6 pid=1729803
        kmem_cache_free+0x34c/0x3c0
        __btrfs_run_delayed_refs+0xabd/0x1290 [btrfs]
        btrfs_run_delayed_refs+0x81/0x210 [btrfs]
        commit_cowonly_roots+0xfb/0x300 [btrfs]
        btrfs_commit_transaction+0x367/0xc40 [btrfs]
        close_ctree+0x113/0x2fa [btrfs]
        generic_shutdown_super+0x6c/0x100
        kill_anon_super+0x14/0x30
        btrfs_kill_super+0x12/0x20 [btrfs]
        deactivate_locked_super+0x31/0x70
        cleanup_mnt+0x100/0x160
        task_work_run+0x68/0xb0
        exit_to_user_mode_prepare+0x1bb/0x1c0
        syscall_exit_to_user_mode+0x4b/0x260
        entry_SYSCALL_64_after_hwframe+0x44/0xa9
  kmem_cache_destroy btrfs_delayed_extent_op: Slab cache still has objects
  CPU: 3 PID: 1729921 Comm: rmmod Tainted: G    B   W         5.10.0-rc4-btrfs-next-73 #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
  Call Trace:
   dump_stack+0x8d/0xb5
   kmem_cache_destroy+0x119/0x120
   exit_btrfs_fs+0xa/0x59 [btrfs]
   __x64_sys_delete_module+0x194/0x260
   ? fpregs_assert_state_consistent+0x1e/0x40
   ? exit_to_user_mode_prepare+0x55/0x1c0
   ? trace_hardirqs_on+0x1b/0xf0
   do_syscall_64+0x33/0x80
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7f693e305897
  Code: 73 01 c3 48 8b 0d f9 (...)
  RSP: 002b:00007ffcf73eb508 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
  RAX: ffffffffffffffda RBX: 0000559df504f760 RCX: 00007f693e305897
  RDX: 000000000000000a RSI: 0000000000000800 RDI: 0000559df504f7c8
  RBP: 00007ffcf73eb568 R08: 0000000000000000 R09: 0000000000000000
  R10: 00007f693e378ac0 R11: 0000000000000206 R12: 00007ffcf73eb740
  R13: 00007ffcf73ec5a6 R14: 0000559df504f2a0 R15: 0000559df504f760
  BTRFS: state leak: start 30408704 end 30425087 state 1 in tree 1 refs 1

So fix this by making the remount path to wait for the cleaner task before
calling btrfs_commit_super(). The remount path now waits for the bit
BTRFS_FS_CLEANER_RUNNING to be cleared from fs_info->flags before calling
btrfs_commit_super() and this ensures the cleaner can not start a
transaction after that, because it sleeps when the filesystem is in RO
mode and we have already flagged the filesystem as RO before waiting for
BTRFS_FS_CLEANER_RUNNING to be cleared.

This also introduces a new flag BTRFS_FS_STATE_RO to be used for
fs_info->fs_state when the filesystem is in RO mode. This is because we
were doing the RO check using the flags of the superblock and setting the
RO mode simply by ORing into the superblock's flags - those operations are
not atomic and could result in the cleaner not seeing the update from the
remount task after it clears BTRFS_FS_CLEANER_RUNNING.

Tested-by: Fabian Vogt <fvogt@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2020-12-18 15:00:02 +01:00
Linus Torvalds
ac7ac4618c for-5.11/block-2020-12-14
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl/Xec8QHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpoLbEACzXypgZWwMdfgRckA/Vt333rXHtbhUV+hK
 2XP+P81iRvr9Esi31UPbRp82vrgcDO0cpI1QmQojS5U5TIQP88BfXptfRZZu48eb
 wT5RDDNQ34HItqAh/yEuYsv9yUKcxeIrB99tBVvM+4UmQg9zTdIW3mg6PvCBdbhV
 N38jI0tCF/PJatjfRuphT/nXonQLPWBlVDmZk06KZQFOwQe9ep1vUi1+nbiRPuo3
 geFBpTh1Kp6Vl1B3n4RpECs6Y7I0RRuJdaH2sDizICla1/BW91F9fQwHimNnUxUq
 e1Q1kMuh6ftcQGkYlHSYcPhuv6CvorldTZCO5arPxWpcwvxriTSMRPWAgUr5pEiF
 fhiGhqeDu9e6vl9vS31wUD1B30hy+jFz9wyjRrDwJ3cPHH1JVBjTzvdX+cIh/1ku
 IbIwUMteUtvUrzqAv/DzbGhedp7xWtOFaVo8j0QFYh9zkjd6b8yDOF/yztwX2gjY
 Xt1cd+KpDSiN449ZRaoMI0sCJAxqzhMa6nsWlb0L7KuNyWKAbvKQBm9Rb47FLV9A
 Vx70KC+zkFoyw23capvIahmQazerriUJ5PGe0lVm6ROgmIFdCpXTPDjnrvq/6RZ/
 GEpD7gTW9atGJ7EuEE8686sAfKD5kneChWLX5EHXf0d0AG5Mr2lKsluiGp5LpPJg
 Q1Xqs6xwww==
 =zo4w
 -----END PGP SIGNATURE-----

Merge tag 'for-5.11/block-2020-12-14' of git://git.kernel.dk/linux-block

Pull block updates from Jens Axboe:
 "Another series of killing more code than what is being added, again
  thanks to Christoph's relentless cleanups and tech debt tackling.

  This contains:

   - blk-iocost improvements (Baolin Wang)

   - part0 iostat fix (Jeffle Xu)

   - Disable iopoll for split bios (Jeffle Xu)

   - block tracepoint cleanups (Christoph Hellwig)

   - Merging of struct block_device and hd_struct (Christoph Hellwig)

   - Rework/cleanup of how block device sizes are updated (Christoph
     Hellwig)

   - Simplification of gendisk lookup and removal of block device
     aliasing (Christoph Hellwig)

   - Block device ioctl cleanups (Christoph Hellwig)

   - Removal of bdget()/blkdev_get() as exported API (Christoph Hellwig)

   - Disk change rework, avoid ->revalidate_disk() (Christoph Hellwig)

   - sbitmap improvements (Pavel Begunkov)

   - Hybrid polling fix (Pavel Begunkov)

   - bvec iteration improvements (Pavel Begunkov)

   - Zone revalidation fixes (Damien Le Moal)

   - blk-throttle limit fix (Yu Kuai)

   - Various little fixes"

* tag 'for-5.11/block-2020-12-14' of git://git.kernel.dk/linux-block: (126 commits)
  blk-mq: fix msec comment from micro to milli seconds
  blk-mq: update arg in comment of blk_mq_map_queue
  blk-mq: add helper allocating tagset->tags
  Revert "block: Fix a lockdep complaint triggered by request queue flushing"
  nvme-loop: use blk_mq_hctx_set_fq_lock_class to set loop's lock class
  blk-mq: add new API of blk_mq_hctx_set_fq_lock_class
  block: disable iopoll for split bio
  block: Improve blk_revalidate_disk_zones() checks
  sbitmap: simplify wrap check
  sbitmap: replace CAS with atomic and
  sbitmap: remove swap_lock
  sbitmap: optimise sbitmap_deferred_clear()
  blk-mq: skip hybrid polling if iopoll doesn't spin
  blk-iocost: Factor out the base vrate change into a separate function
  blk-iocost: Factor out the active iocgs' state check into a separate function
  blk-iocost: Move the usage ratio calculation to the correct place
  blk-iocost: Remove unnecessary advance declaration
  blk-iocost: Fix some typos in comments
  blktrace: fix up a kerneldoc comment
  block: remove the request_queue to argument request based tracepoints
  ...
2020-12-16 12:57:51 -08:00
David Sterba
1201b58b67 btrfs: drop casts of bio bi_sector
Since commit 72deb455b5 ("block: remove CONFIG_LBDAF") (5.2) the
sector_t type is u64 on all arches and configs so we don't need to
typecast it.  It used to be unsigned long and the result of sector size
shifts were not guaranteed to fit in the type.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2020-12-09 19:16:05 +01:00
Naohiro Aota
12659251ca btrfs: implement log-structured superblock for ZONED mode
Superblock (and its copies) is the only data structure in btrfs which
has a fixed location on a device. Since we cannot overwrite in a
sequential write required zone, we cannot place superblock in the zone.
One easy solution is limiting superblock and copies to be placed only in
conventional zones.  However, this method has two downsides: one is
reduced number of superblock copies. The location of the second copy of
superblock is 256GB, which is in a sequential write required zone on
typical devices in the market today.  So, the number of superblock and
copies is limited to be two.  Second downside is that we cannot support
devices which have no conventional zones at all.

To solve these two problems, we employ superblock log writing. It uses
two adjacent zones as a circular buffer to write updated superblocks.
Once the first zone is filled up, start writing into the second one.
Then, when both zones are filled up and before starting to write to the
first zone again, it reset the first zone.

We can determine the position of the latest superblock by reading write
pointer information from a device. One corner case is when both zones
are full. For this situation, we read out the last superblock of each
zone, and compare them to determine which zone is older.

The following zones are reserved as the circular buffer on ZONED btrfs.

- The primary superblock: zones 0 and 1
- The first copy: zones 16 and 17
- The second copy: zones 1024 or zone at 256GB which is minimum, and
  next to it

If these reserved zones are conventional, superblock is written fixed at
the start of the zone without logging.

Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2020-12-09 19:16:04 +01:00
Naohiro Aota
b70f509774 btrfs: check and enable ZONED mode
Introduce function btrfs_check_zoned_mode() to check if ZONED flag is
enabled on the file system and if the file system consists of zoned
devices with equal zone size.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2020-12-09 19:16:03 +01:00
Naohiro Aota
5b31646898 btrfs: get zone information of zoned block devices
If a zoned block device is found, get its zone information (number of
zones and zone size).  To avoid costly run-time zone report
commands to test the device zones type during block allocation, attach
the seq_zones bitmap to the device structure to indicate if a zone is
sequential or accept random writes. Also it attaches the empty_zones
bitmap to indicate if a zone is empty or not.

This patch also introduces the helper function btrfs_dev_is_sequential()
to test if the zone storing a block is a sequential write required zone
and btrfs_dev_is_empty_zone() to test if the zone is a empty zone.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2020-12-09 19:15:57 +01:00
Anand Jain
b2598edf8b btrfs: remove unused argument seed from btrfs_find_device
Commit 343694eee8d8 ("btrfs: switch seed device to list api"), missed to
check if the parameter seed is true in the function btrfs_find_device().
This tells it whether to traverse the seed device list or not.

After this commit, the argument is unused and can be removed.

In device_list_add() it's not necessary because fs_devices always points
to the device's fs_devices. So with the devid+uuid matching, it will
find the right device and return, thus not needing to traverse seed
devices.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2020-12-08 15:54:08 +01:00
Anand Jain
3a160a9331 btrfs: drop never met disk total bytes check in verify_one_dev_extent
Drop the condition in verify_one_dev_extent,
btrfs_device::disk_total_bytes is set even for a seed device. The
comment is wrong, the size is properly set when cloning the device.

Commit 1b3922a8bc ("btrfs: Use real device structure to verify
dev extent") introduced it but it's unclear why the total_disk_bytes
was 0.

Theoretically, all devices (including missing and seed) marked with the
BTRFS_DEV_STATE_IN_FS_METADATA flag gets the total_disk_bytes updated at
fill_device_from_item():

  open_ctree()
    btrfs_read_chunk_tree()
      read_one_dev()
        open_seed_device()
        fill_device_from_item()

Even if verify_one_dev_extent() reports total_disk_bytes == 0, then its
a bug to be fixed somewhere else and not in verify_one_dev_extent() as
it's just a messenger. It is never expected that a total_disk_bytes
shall be zero.

The function fill_device_from_item() does the job of reading it from the
item and updating btrfs_device::disk_total_bytes. So both the missing
device and the seed devices do have their disk_total_bytes updated.
btrfs_find_device can also return a device from fs_info->seed_list
because it searches it as well.

Furthermore, while removing the device if there is a power loss, we
could have a device with its total_bytes = 0, that's still valid.

Instead, introduce a check against maximum block device size in
read_one_dev().

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2020-12-08 15:54:08 +01:00
Anand Jain
bacce86ae8 btrfs: drop unused argument step from btrfs_free_extra_devids
Commit cf89af146b ("btrfs: dev-replace: fail mount if we don't have
replace item with target device") dropped the multi stage operation of
btrfs_free_extra_devids() that does not need to check replace target
anymore and we can remove the 'step' argument.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2020-12-08 15:54:08 +01:00
Josef Bacik
e114c545bb btrfs: set the lockdep class for extent buffers on creation
Both Filipe and Fedora QA recently hit the following lockdep splat:

  WARNING: possible recursive locking detected
  5.10.0-0.rc1.20201028gited8780e3f2ec.57.fc34.x86_64 #1 Not tainted
  --------------------------------------------
  rsync/2610 is trying to acquire lock:
  ffff89617ed48f20 (&eb->lock){++++}-{2:2}, at: btrfs_tree_read_lock_atomic+0x34/0x140

  but task is already holding lock:
  ffff8961757b1130 (&eb->lock){++++}-{2:2}, at: btrfs_tree_read_lock_atomic+0x34/0x140

  other info that might help us debug this:
   Possible unsafe locking scenario:
	 CPU0
	 ----
    lock(&eb->lock);
    lock(&eb->lock);

   *** DEADLOCK ***
   May be due to missing lock nesting notation
  2 locks held by rsync/2610:
   #0: ffff896107212b90 (&type->i_mutex_dir_key#10){++++}-{3:3}, at: walk_component+0x10c/0x190
   #1: ffff8961757b1130 (&eb->lock){++++}-{2:2}, at: btrfs_tree_read_lock_atomic+0x34/0x140

  stack backtrace:
  CPU: 1 PID: 2610 Comm: rsync Not tainted 5.10.0-0.rc1.20201028gited8780e3f2ec.57.fc34.x86_64 #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015
  Call Trace:
   dump_stack+0x8b/0xb0
   __lock_acquire.cold+0x12d/0x2a4
   ? kvm_sched_clock_read+0x14/0x30
   ? sched_clock+0x5/0x10
   lock_acquire+0xc8/0x400
   ? btrfs_tree_read_lock_atomic+0x34/0x140
   ? read_block_for_search.isra.0+0xdd/0x320
   _raw_read_lock+0x3d/0xa0
   ? btrfs_tree_read_lock_atomic+0x34/0x140
   btrfs_tree_read_lock_atomic+0x34/0x140
   btrfs_search_slot+0x616/0x9a0
   btrfs_lookup_dir_item+0x6c/0xb0
   btrfs_lookup_dentry+0xa8/0x520
   ? lockdep_init_map_waits+0x4c/0x210
   btrfs_lookup+0xe/0x30
   __lookup_slow+0x10f/0x1e0
   walk_component+0x11b/0x190
   path_lookupat+0x72/0x1c0
   filename_lookup+0x97/0x180
   ? strncpy_from_user+0x96/0x1e0
   ? getname_flags.part.0+0x45/0x1a0
   vfs_statx+0x64/0x100
   ? lockdep_hardirqs_on_prepare+0xff/0x180
   ? _raw_spin_unlock_irqrestore+0x41/0x50
   __do_sys_newlstat+0x26/0x40
   ? lockdep_hardirqs_on_prepare+0xff/0x180
   ? syscall_enter_from_user_mode+0x27/0x80
   ? syscall_enter_from_user_mode+0x27/0x80
   do_syscall_64+0x33/0x40
   entry_SYSCALL_64_after_hwframe+0x44/0xa9

I have also seen a report of lockdep complaining about the lock class
that was looked up being the same as the lock class on the lock we were
using, but I can't find the report.

These are problems that occur because we do not have the lockdep class
set on the extent buffer until _after_ we read the eb in properly.  This
is problematic for concurrent readers, because we will create the extent
buffer, lock it, and then attempt to read the extent buffer.

If a second thread comes in and tries to do a search down the same path
they'll get the above lockdep splat because the class isn't set properly
on the extent buffer.

There was a good reason for this, we generally didn't know the real
owner of the eb until we read it, specifically in refcounted roots.

However now all refcounted roots have the same class name, so we no
longer need to worry about this.  For non-refcounted trees we know
which root we're on based on the parent.

Fix this by setting the lockdep class on the eb at creation time instead
of read time.  This will fix the splat and the weirdness where the class
changes in the middle of locking the block.

Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2020-12-08 15:54:07 +01:00
Josef Bacik
3fbaf25817 btrfs: pass the owner_root and level to alloc_extent_buffer
Now that we've plumbed all of the callers to have the owner root and the
level, plumb it down into alloc_extent_buffer().

Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2020-12-08 15:54:07 +01:00
Josef Bacik
bfb484d922 btrfs: cleanup extent buffer readahead
We're going to pass around more information when we allocate extent
buffers, in order to make that cleaner how we do readahead.  Most of the
callers have the parent node that we're getting our blockptr from, with
the sole exception of relocation which simply has the bytenr it wants to
read.

Add a helper that takes the current arguments that we need (bytenr and
gen), and add another helper for simply reading the slot out of a node.
In followup patches the helper that takes all the extra arguments will
be expanded, and the simpler helper won't need to have it's arguments
adjusted.

Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2020-12-08 15:54:05 +01:00
Anand Jain
33fd2f714c btrfs: create read policy framework
As of now, we use the pid method to read striped mirrored data, which
means process id determines the stripe id to read. This type of routing
typically helps in a system with many small independent processes tying
to read random data. On the other hand, the pid based read IO policy is
inefficient because if there is a single process trying to read a large
file, the overall disk bandwidth remains underutilized.

So this patch introduces a read policy framework so that we could add
more read policies, such as IO routing based on the device's wait-queue
or manual when we have a read-preferred device or a policy based on the
target storage caching.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2020-12-08 15:53:44 +01:00
Josef Bacik
42437a6386 btrfs: introduce mount option rescue=ignorebadroots
In the face of extent root corruption, or any other core fs wide root
corruption we will fail to mount the file system.  This makes recovery
kind of a pain, because you need to fall back to userspace tools to
scrape off data.  Instead provide a mechanism to gracefully handle bad
roots, so we can at least mount read-only and possibly recover data from
the file system.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2020-12-08 15:53:41 +01:00
Christoph Hellwig
4e7b5671c6 block: remove i_bdev
Switch the block device lookup interfaces to directly work with a dev_t
so that struct block_device references are only acquired by the
blkdev_get variants (and the blk-cgroup special case).  This means that
we now don't need an extra reference in the inode and can generally
simplify handling of struct block_device to keep the lookups contained
in the core block layer code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Coly Li <colyli@suse.de>		[bcache]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-01 14:53:39 -07:00
Johannes Thumshirn
0697d9a610 btrfs: don't access possibly stale fs_info data for printing duplicate device
Syzbot reported a possible use-after-free when printing a duplicate device
warning device_list_add().

At this point it can happen that a btrfs_device::fs_info is not correctly
setup yet, so we're accessing stale data, when printing the warning
message using the btrfs_printk() wrappers.

  ==================================================================
  BUG: KASAN: use-after-free in btrfs_printk+0x3eb/0x435 fs/btrfs/super.c:245
  Read of size 8 at addr ffff8880878e06a8 by task syz-executor225/7068

  CPU: 1 PID: 7068 Comm: syz-executor225 Not tainted 5.9.0-rc5-syzkaller #0
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
  Call Trace:
   __dump_stack lib/dump_stack.c:77 [inline]
   dump_stack+0x1d6/0x29e lib/dump_stack.c:118
   print_address_description+0x66/0x620 mm/kasan/report.c:383
   __kasan_report mm/kasan/report.c:513 [inline]
   kasan_report+0x132/0x1d0 mm/kasan/report.c:530
   btrfs_printk+0x3eb/0x435 fs/btrfs/super.c:245
   device_list_add+0x1a88/0x1d60 fs/btrfs/volumes.c:943
   btrfs_scan_one_device+0x196/0x490 fs/btrfs/volumes.c:1359
   btrfs_mount_root+0x48f/0xb60 fs/btrfs/super.c:1634
   legacy_get_tree+0xea/0x180 fs/fs_context.c:592
   vfs_get_tree+0x88/0x270 fs/super.c:1547
   fc_mount fs/namespace.c:978 [inline]
   vfs_kern_mount+0xc9/0x160 fs/namespace.c:1008
   btrfs_mount+0x33c/0xae0 fs/btrfs/super.c:1732
   legacy_get_tree+0xea/0x180 fs/fs_context.c:592
   vfs_get_tree+0x88/0x270 fs/super.c:1547
   do_new_mount fs/namespace.c:2875 [inline]
   path_mount+0x179d/0x29e0 fs/namespace.c:3192
   do_mount fs/namespace.c:3205 [inline]
   __do_sys_mount fs/namespace.c:3413 [inline]
   __se_sys_mount+0x126/0x180 fs/namespace.c:3390
   do_syscall_64+0x31/0x70 arch/x86/entry/common.c:46
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x44840a
  RSP: 002b:00007ffedfffd608 EFLAGS: 00000293 ORIG_RAX: 00000000000000a5
  RAX: ffffffffffffffda RBX: 00007ffedfffd670 RCX: 000000000044840a
  RDX: 0000000020000000 RSI: 0000000020000100 RDI: 00007ffedfffd630
  RBP: 00007ffedfffd630 R08: 00007ffedfffd670 R09: 0000000000000000
  R10: 0000000000000000 R11: 0000000000000293 R12: 000000000000001a
  R13: 0000000000000004 R14: 0000000000000003 R15: 0000000000000003

  Allocated by task 6945:
   kasan_save_stack mm/kasan/common.c:48 [inline]
   kasan_set_track mm/kasan/common.c:56 [inline]
   __kasan_kmalloc+0x100/0x130 mm/kasan/common.c:461
   kmalloc_node include/linux/slab.h:577 [inline]
   kvmalloc_node+0x81/0x110 mm/util.c:574
   kvmalloc include/linux/mm.h:757 [inline]
   kvzalloc include/linux/mm.h:765 [inline]
   btrfs_mount_root+0xd0/0xb60 fs/btrfs/super.c:1613
   legacy_get_tree+0xea/0x180 fs/fs_context.c:592
   vfs_get_tree+0x88/0x270 fs/super.c:1547
   fc_mount fs/namespace.c:978 [inline]
   vfs_kern_mount+0xc9/0x160 fs/namespace.c:1008
   btrfs_mount+0x33c/0xae0 fs/btrfs/super.c:1732
   legacy_get_tree+0xea/0x180 fs/fs_context.c:592
   vfs_get_tree+0x88/0x270 fs/super.c:1547
   do_new_mount fs/namespace.c:2875 [inline]
   path_mount+0x179d/0x29e0 fs/namespace.c:3192
   do_mount fs/namespace.c:3205 [inline]
   __do_sys_mount fs/namespace.c:3413 [inline]
   __se_sys_mount+0x126/0x180 fs/namespace.c:3390
   do_syscall_64+0x31/0x70 arch/x86/entry/common.c:46
   entry_SYSCALL_64_after_hwframe+0x44/0xa9

  Freed by task 6945:
   kasan_save_stack mm/kasan/common.c:48 [inline]
   kasan_set_track+0x3d/0x70 mm/kasan/common.c:56
   kasan_set_free_info+0x17/0x30 mm/kasan/generic.c:355
   __kasan_slab_free+0xdd/0x110 mm/kasan/common.c:422
   __cache_free mm/slab.c:3418 [inline]
   kfree+0x113/0x200 mm/slab.c:3756
   deactivate_locked_super+0xa7/0xf0 fs/super.c:335
   btrfs_mount_root+0x72b/0xb60 fs/btrfs/super.c:1678
   legacy_get_tree+0xea/0x180 fs/fs_context.c:592
   vfs_get_tree+0x88/0x270 fs/super.c:1547
   fc_mount fs/namespace.c:978 [inline]
   vfs_kern_mount+0xc9/0x160 fs/namespace.c:1008
   btrfs_mount+0x33c/0xae0 fs/btrfs/super.c:1732
   legacy_get_tree+0xea/0x180 fs/fs_context.c:592
   vfs_get_tree+0x88/0x270 fs/super.c:1547
   do_new_mount fs/namespace.c:2875 [inline]
   path_mount+0x179d/0x29e0 fs/namespace.c:3192
   do_mount fs/namespace.c:3205 [inline]
   __do_sys_mount fs/namespace.c:3413 [inline]
   __se_sys_mount+0x126/0x180 fs/namespace.c:3390
   do_syscall_64+0x31/0x70 arch/x86/entry/common.c:46
   entry_SYSCALL_64_after_hwframe+0x44/0xa9

  The buggy address belongs to the object at ffff8880878e0000
   which belongs to the cache kmalloc-16k of size 16384
  The buggy address is located 1704 bytes inside of
   16384-byte region [ffff8880878e0000, ffff8880878e4000)
  The buggy address belongs to the page:
  page:0000000060704f30 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x878e0
  head:0000000060704f30 order:3 compound_mapcount:0 compound_pincount:0
  flags: 0xfffe0000010200(slab|head)
  raw: 00fffe0000010200 ffffea00028e9a08 ffffea00021e3608 ffff8880aa440b00
  raw: 0000000000000000 ffff8880878e0000 0000000100000001 0000000000000000
  page dumped because: kasan: bad access detected

  Memory state around the buggy address:
   ffff8880878e0580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
   ffff8880878e0600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
  >ffff8880878e0680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
				    ^
   ffff8880878e0700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
   ffff8880878e0780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
  ==================================================================

The syzkaller reproducer for this use-after-free crafts a filesystem image
and loop mounts it twice in a loop. The mount will fail as the crafted
image has an invalid chunk tree. When this happens btrfs_mount_root() will
call deactivate_locked_super(), which then cleans up fs_info and
fs_info::sb. If a second thread now adds the same block-device to the
filesystem, it will get detected as a duplicate device and
device_list_add() will reject the duplicate and print a warning. But as
the fs_info pointer passed in is non-NULL this will result in a
use-after-free.

Instead of printing possibly uninitialized or already freed memory in
btrfs_printk(), explicitly pass in a NULL fs_info so the printing of the
device name will be skipped altogether.

There was a slightly different approach discussed in
https://lore.kernel.org/linux-btrfs/20200114060920.4527-1-anand.jain@oracle.com/t/#u

Link: https://lore.kernel.org/linux-btrfs/000000000000c9e14b05afcc41ba@google.com
Reported-by: syzbot+582e66e5edf36a22c7b0@syzkaller.appspotmail.com
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2020-11-23 21:16:12 +01:00
Anand Jain
cf89af146b btrfs: dev-replace: fail mount if we don't have replace item with target device
If there is a device BTRFS_DEV_REPLACE_DEVID without the device replace
item, then it means the filesystem is inconsistent state. This is either
corruption or a crafted image.  Fail the mount as this needs a closer
look what is actually wrong.

As of now if BTRFS_DEV_REPLACE_DEVID is present without the replace
item, in __btrfs_free_extra_devids() we determine that there is an
extra device, and free those extra devices but continue to mount the
device.
However, we were wrong in keeping tack of the rw_devices so the syzbot
testcase failed:

  WARNING: CPU: 1 PID: 3612 at fs/btrfs/volumes.c:1166 close_fs_devices.part.0+0x607/0x800 fs/btrfs/volumes.c:1166
  Kernel panic - not syncing: panic_on_warn set ...
  CPU: 1 PID: 3612 Comm: syz-executor.2 Not tainted 5.9.0-rc4-syzkaller #0
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
  Call Trace:
   __dump_stack lib/dump_stack.c:77 [inline]
   dump_stack+0x198/0x1fd lib/dump_stack.c:118
   panic+0x347/0x7c0 kernel/panic.c:231
   __warn.cold+0x20/0x46 kernel/panic.c:600
   report_bug+0x1bd/0x210 lib/bug.c:198
   handle_bug+0x38/0x90 arch/x86/kernel/traps.c:234
   exc_invalid_op+0x14/0x40 arch/x86/kernel/traps.c:254
   asm_exc_invalid_op+0x12/0x20 arch/x86/include/asm/idtentry.h:536
  RIP: 0010:close_fs_devices.part.0+0x607/0x800 fs/btrfs/volumes.c:1166
  RSP: 0018:ffffc900091777e0 EFLAGS: 00010246
  RAX: 0000000000040000 RBX: ffffffffffffffff RCX: ffffc9000c8b7000
  RDX: 0000000000040000 RSI: ffffffff83097f47 RDI: 0000000000000007
  RBP: dffffc0000000000 R08: 0000000000000001 R09: ffff8880988a187f
  R10: 0000000000000000 R11: 0000000000000001 R12: ffff88809593a130
  R13: ffff88809593a1ec R14: ffff8880988a1908 R15: ffff88809593a050
   close_fs_devices fs/btrfs/volumes.c:1193 [inline]
   btrfs_close_devices+0x95/0x1f0 fs/btrfs/volumes.c:1179
   open_ctree+0x4984/0x4a2d fs/btrfs/disk-io.c:3434
   btrfs_fill_super fs/btrfs/super.c:1316 [inline]
   btrfs_mount_root.cold+0x14/0x165 fs/btrfs/super.c:1672

The fix here is, when we determine that there isn't a replace item
then fail the mount if there is a replace target device (devid 0).

CC: stable@vger.kernel.org # 4.19+
Reported-by: syzbot+4cfe71a4da060be47502@syzkaller.appspotmail.com
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2020-11-05 13:03:31 +01:00
Davidlohr Bueso
d5c8238849 btrfs: convert data_seqcount to seqcount_mutex_t
By doing so we can associate the sequence counter to the chunk_mutex
for lockdep purposes (compiled-out otherwise), the mutex is otherwise
used on the write side.
Also avoid explicitly disabling preemption around the write region as it
will now be done automatically by the seqcount machinery based on the
lock type.

Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2020-10-27 15:11:51 +01:00
Filipe Manana
66d204a16c btrfs: fix readahead hang and use-after-free after removing a device
Very sporadically I had test case btrfs/069 from fstests hanging (for
years, it is not a recent regression), with the following traces in
dmesg/syslog:

  [162301.160628] BTRFS info (device sdc): dev_replace from /dev/sdd (devid 2) to /dev/sdg started
  [162301.181196] BTRFS info (device sdc): scrub: finished on devid 4 with status: 0
  [162301.287162] BTRFS info (device sdc): dev_replace from /dev/sdd (devid 2) to /dev/sdg finished
  [162513.513792] INFO: task btrfs-transacti:1356167 blocked for more than 120 seconds.
  [162513.514318]       Not tainted 5.9.0-rc6-btrfs-next-69 #1
  [162513.514522] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  [162513.514747] task:btrfs-transacti state:D stack:    0 pid:1356167 ppid:     2 flags:0x00004000
  [162513.514751] Call Trace:
  [162513.514761]  __schedule+0x5ce/0xd00
  [162513.514765]  ? _raw_spin_unlock_irqrestore+0x3c/0x60
  [162513.514771]  schedule+0x46/0xf0
  [162513.514844]  wait_current_trans+0xde/0x140 [btrfs]
  [162513.514850]  ? finish_wait+0x90/0x90
  [162513.514864]  start_transaction+0x37c/0x5f0 [btrfs]
  [162513.514879]  transaction_kthread+0xa4/0x170 [btrfs]
  [162513.514891]  ? btrfs_cleanup_transaction+0x660/0x660 [btrfs]
  [162513.514894]  kthread+0x153/0x170
  [162513.514897]  ? kthread_stop+0x2c0/0x2c0
  [162513.514902]  ret_from_fork+0x22/0x30
  [162513.514916] INFO: task fsstress:1356184 blocked for more than 120 seconds.
  [162513.515192]       Not tainted 5.9.0-rc6-btrfs-next-69 #1
  [162513.515431] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  [162513.515680] task:fsstress        state:D stack:    0 pid:1356184 ppid:1356177 flags:0x00004000
  [162513.515682] Call Trace:
  [162513.515688]  __schedule+0x5ce/0xd00
  [162513.515691]  ? _raw_spin_unlock_irqrestore+0x3c/0x60
  [162513.515697]  schedule+0x46/0xf0
  [162513.515712]  wait_current_trans+0xde/0x140 [btrfs]
  [162513.515716]  ? finish_wait+0x90/0x90
  [162513.515729]  start_transaction+0x37c/0x5f0 [btrfs]
  [162513.515743]  btrfs_attach_transaction_barrier+0x1f/0x50 [btrfs]
  [162513.515753]  btrfs_sync_fs+0x61/0x1c0 [btrfs]
  [162513.515758]  ? __ia32_sys_fdatasync+0x20/0x20
  [162513.515761]  iterate_supers+0x87/0xf0
  [162513.515765]  ksys_sync+0x60/0xb0
  [162513.515768]  __do_sys_sync+0xa/0x10
  [162513.515771]  do_syscall_64+0x33/0x80
  [162513.515774]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
  [162513.515781] RIP: 0033:0x7f5238f50bd7
  [162513.515782] Code: Bad RIP value.
  [162513.515784] RSP: 002b:00007fff67b978e8 EFLAGS: 00000206 ORIG_RAX: 00000000000000a2
  [162513.515786] RAX: ffffffffffffffda RBX: 000055b1fad2c560 RCX: 00007f5238f50bd7
  [162513.515788] RDX: 00000000ffffffff RSI: 000000000daf0e74 RDI: 000000000000003a
  [162513.515789] RBP: 0000000000000032 R08: 000000000000000a R09: 00007f5239019be0
  [162513.515791] R10: fffffffffffff24f R11: 0000000000000206 R12: 000000000000003a
  [162513.515792] R13: 00007fff67b97950 R14: 00007fff67b97906 R15: 000055b1fad1a340
  [162513.515804] INFO: task fsstress:1356185 blocked for more than 120 seconds.
  [162513.516064]       Not tainted 5.9.0-rc6-btrfs-next-69 #1
  [162513.516329] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  [162513.516617] task:fsstress        state:D stack:    0 pid:1356185 ppid:1356177 flags:0x00000000
  [162513.516620] Call Trace:
  [162513.516625]  __schedule+0x5ce/0xd00
  [162513.516628]  ? _raw_spin_unlock_irqrestore+0x3c/0x60
  [162513.516634]  schedule+0x46/0xf0
  [162513.516647]  wait_current_trans+0xde/0x140 [btrfs]
  [162513.516650]  ? finish_wait+0x90/0x90
  [162513.516662]  start_transaction+0x4d7/0x5f0 [btrfs]
  [162513.516679]  btrfs_setxattr_trans+0x3c/0x100 [btrfs]
  [162513.516686]  __vfs_setxattr+0x66/0x80
  [162513.516691]  __vfs_setxattr_noperm+0x70/0x200
  [162513.516697]  vfs_setxattr+0x6b/0x120
  [162513.516703]  setxattr+0x125/0x240
  [162513.516709]  ? lock_acquire+0xb1/0x480
  [162513.516712]  ? mnt_want_write+0x20/0x50
  [162513.516721]  ? rcu_read_lock_any_held+0x8e/0xb0
  [162513.516723]  ? preempt_count_add+0x49/0xa0
  [162513.516725]  ? __sb_start_write+0x19b/0x290
  [162513.516727]  ? preempt_count_add+0x49/0xa0
  [162513.516732]  path_setxattr+0xba/0xd0
  [162513.516739]  __x64_sys_setxattr+0x27/0x30
  [162513.516741]  do_syscall_64+0x33/0x80
  [162513.516743]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
  [162513.516745] RIP: 0033:0x7f5238f56d5a
  [162513.516746] Code: Bad RIP value.
  [162513.516748] RSP: 002b:00007fff67b97868 EFLAGS: 00000202 ORIG_RAX: 00000000000000bc
  [162513.516750] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f5238f56d5a
  [162513.516751] RDX: 000055b1fbb0d5a0 RSI: 00007fff67b978a0 RDI: 000055b1fbb0d470
  [162513.516753] RBP: 000055b1fbb0d5a0 R08: 0000000000000001 R09: 00007fff67b97700
  [162513.516754] R10: 0000000000000004 R11: 0000000000000202 R12: 0000000000000004
  [162513.516756] R13: 0000000000000024 R14: 0000000000000001 R15: 00007fff67b978a0
  [162513.516767] INFO: task fsstress:1356196 blocked for more than 120 seconds.
  [162513.517064]       Not tainted 5.9.0-rc6-btrfs-next-69 #1
  [162513.517365] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  [162513.517763] task:fsstress        state:D stack:    0 pid:1356196 ppid:1356177 flags:0x00004000
  [162513.517780] Call Trace:
  [162513.517786]  __schedule+0x5ce/0xd00
  [162513.517789]  ? _raw_spin_unlock_irqrestore+0x3c/0x60
  [162513.517796]  schedule+0x46/0xf0
  [162513.517810]  wait_current_trans+0xde/0x140 [btrfs]
  [162513.517814]  ? finish_wait+0x90/0x90
  [162513.517829]  start_transaction+0x37c/0x5f0 [btrfs]
  [162513.517845]  btrfs_attach_transaction_barrier+0x1f/0x50 [btrfs]
  [162513.517857]  btrfs_sync_fs+0x61/0x1c0 [btrfs]
  [162513.517862]  ? __ia32_sys_fdatasync+0x20/0x20
  [162513.517865]  iterate_supers+0x87/0xf0
  [162513.517869]  ksys_sync+0x60/0xb0
  [162513.517872]  __do_sys_sync+0xa/0x10
  [162513.517875]  do_syscall_64+0x33/0x80
  [162513.517878]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
  [162513.517881] RIP: 0033:0x7f5238f50bd7
  [162513.517883] Code: Bad RIP value.
  [162513.517885] RSP: 002b:00007fff67b978e8 EFLAGS: 00000206 ORIG_RAX: 00000000000000a2
  [162513.517887] RAX: ffffffffffffffda RBX: 000055b1fad2c560 RCX: 00007f5238f50bd7
  [162513.517889] RDX: 0000000000000000 RSI: 000000007660add2 RDI: 0000000000000053
  [162513.517891] RBP: 0000000000000032 R08: 0000000000000067 R09: 00007f5239019be0
  [162513.517893] R10: fffffffffffff24f R11: 0000000000000206 R12: 0000000000000053
  [162513.517895] R13: 00007fff67b97950 R14: 00007fff67b97906 R15: 000055b1fad1a340
  [162513.517908] INFO: task fsstress:1356197 blocked for more than 120 seconds.
  [162513.518298]       Not tainted 5.9.0-rc6-btrfs-next-69 #1
  [162513.518672] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  [162513.519157] task:fsstress        state:D stack:    0 pid:1356197 ppid:1356177 flags:0x00000000
  [162513.519160] Call Trace:
  [162513.519165]  __schedule+0x5ce/0xd00
  [162513.519168]  ? _raw_spin_unlock_irqrestore+0x3c/0x60
  [162513.519174]  schedule+0x46/0xf0
  [162513.519190]  wait_current_trans+0xde/0x140 [btrfs]
  [162513.519193]  ? finish_wait+0x90/0x90
  [162513.519206]  start_transaction+0x4d7/0x5f0 [btrfs]
  [162513.519222]  btrfs_create+0x57/0x200 [btrfs]
  [162513.519230]  lookup_open+0x522/0x650
  [162513.519246]  path_openat+0x2b8/0xa50
  [162513.519270]  do_filp_open+0x91/0x100
  [162513.519275]  ? find_held_lock+0x32/0x90
  [162513.519280]  ? lock_acquired+0x33b/0x470
  [162513.519285]  ? do_raw_spin_unlock+0x4b/0xc0
  [162513.519287]  ? _raw_spin_unlock+0x29/0x40
  [162513.519295]  do_sys_openat2+0x20d/0x2d0
  [162513.519300]  do_sys_open+0x44/0x80
  [162513.519304]  do_syscall_64+0x33/0x80
  [162513.519307]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
  [162513.519309] RIP: 0033:0x7f5238f4a903
  [162513.519310] Code: Bad RIP value.
  [162513.519312] RSP: 002b:00007fff67b97758 EFLAGS: 00000246 ORIG_RAX: 0000000000000055
  [162513.519314] RAX: ffffffffffffffda RBX: 00000000ffffffff RCX: 00007f5238f4a903
  [162513.519316] RDX: 0000000000000000 RSI: 00000000000001b6 RDI: 000055b1fbb0d470
  [162513.519317] RBP: 00007fff67b978c0 R08: 0000000000000001 R09: 0000000000000002
  [162513.519319] R10: 00007fff67b974f7 R11: 0000000000000246 R12: 0000000000000013
  [162513.519320] R13: 00000000000001b6 R14: 00007fff67b97906 R15: 000055b1fad1c620
  [162513.519332] INFO: task btrfs:1356211 blocked for more than 120 seconds.
  [162513.519727]       Not tainted 5.9.0-rc6-btrfs-next-69 #1
  [162513.520115] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  [162513.520508] task:btrfs           state:D stack:    0 pid:1356211 ppid:1356178 flags:0x00004002
  [162513.520511] Call Trace:
  [162513.520516]  __schedule+0x5ce/0xd00
  [162513.520519]  ? _raw_spin_unlock_irqrestore+0x3c/0x60
  [162513.520525]  schedule+0x46/0xf0
  [162513.520544]  btrfs_scrub_pause+0x11f/0x180 [btrfs]
  [162513.520548]  ? finish_wait+0x90/0x90
  [162513.520562]  btrfs_commit_transaction+0x45a/0xc30 [btrfs]
  [162513.520574]  ? start_transaction+0xe0/0x5f0 [btrfs]
  [162513.520596]  btrfs_dev_replace_finishing+0x6d8/0x711 [btrfs]
  [162513.520619]  btrfs_dev_replace_by_ioctl.cold+0x1cc/0x1fd [btrfs]
  [162513.520639]  btrfs_ioctl+0x2a25/0x36f0 [btrfs]
  [162513.520643]  ? do_sigaction+0xf3/0x240
  [162513.520645]  ? find_held_lock+0x32/0x90
  [162513.520648]  ? do_sigaction+0xf3/0x240
  [162513.520651]  ? lock_acquired+0x33b/0x470
  [162513.520655]  ? _raw_spin_unlock_irq+0x24/0x50
  [162513.520657]  ? lockdep_hardirqs_on+0x7d/0x100
  [162513.520660]  ? _raw_spin_unlock_irq+0x35/0x50
  [162513.520662]  ? do_sigaction+0xf3/0x240
  [162513.520671]  ? __x64_sys_ioctl+0x83/0xb0
  [162513.520672]  __x64_sys_ioctl+0x83/0xb0
  [162513.520677]  do_syscall_64+0x33/0x80
  [162513.520679]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
  [162513.520681] RIP: 0033:0x7fc3cd307d87
  [162513.520682] Code: Bad RIP value.
  [162513.520684] RSP: 002b:00007ffe30a56bb8 EFLAGS: 00000202 ORIG_RAX: 0000000000000010
  [162513.520686] RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00007fc3cd307d87
  [162513.520687] RDX: 00007ffe30a57a30 RSI: 00000000ca289435 RDI: 0000000000000003
  [162513.520689] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
  [162513.520690] R10: 0000000000000008 R11: 0000000000000202 R12: 0000000000000003
  [162513.520692] R13: 0000557323a212e0 R14: 00007ffe30a5a520 R15: 0000000000000001
  [162513.520703]
		  Showing all locks held in the system:
  [162513.520712] 1 lock held by khungtaskd/54:
  [162513.520713]  #0: ffffffffb40a91a0 (rcu_read_lock){....}-{1:2}, at: debug_show_all_locks+0x15/0x197
  [162513.520728] 1 lock held by in:imklog/596:
  [162513.520729]  #0: ffff8f3f0d781400 (&f->f_pos_lock){+.+.}-{3:3}, at: __fdget_pos+0x4d/0x60
  [162513.520782] 1 lock held by btrfs-transacti/1356167:
  [162513.520784]  #0: ffff8f3d810cc848 (&fs_info->transaction_kthread_mutex){+.+.}-{3:3}, at: transaction_kthread+0x4a/0x170 [btrfs]
  [162513.520798] 1 lock held by btrfs/1356190:
  [162513.520800]  #0: ffff8f3d57644470 (sb_writers#15){.+.+}-{0:0}, at: mnt_want_write_file+0x22/0x60
  [162513.520805] 1 lock held by fsstress/1356184:
  [162513.520806]  #0: ffff8f3d576440e8 (&type->s_umount_key#62){++++}-{3:3}, at: iterate_supers+0x6f/0xf0
  [162513.520811] 3 locks held by fsstress/1356185:
  [162513.520812]  #0: ffff8f3d57644470 (sb_writers#15){.+.+}-{0:0}, at: mnt_want_write+0x20/0x50
  [162513.520815]  #1: ffff8f3d80a650b8 (&type->i_mutex_dir_key#10){++++}-{3:3}, at: vfs_setxattr+0x50/0x120
  [162513.520820]  #2: ffff8f3d57644690 (sb_internal#2){.+.+}-{0:0}, at: start_transaction+0x40e/0x5f0 [btrfs]
  [162513.520833] 1 lock held by fsstress/1356196:
  [162513.520834]  #0: ffff8f3d576440e8 (&type->s_umount_key#62){++++}-{3:3}, at: iterate_supers+0x6f/0xf0
  [162513.520838] 3 locks held by fsstress/1356197:
  [162513.520839]  #0: ffff8f3d57644470 (sb_writers#15){.+.+}-{0:0}, at: mnt_want_write+0x20/0x50
  [162513.520843]  #1: ffff8f3d506465e8 (&type->i_mutex_dir_key#10){++++}-{3:3}, at: path_openat+0x2a7/0xa50
  [162513.520846]  #2: ffff8f3d57644690 (sb_internal#2){.+.+}-{0:0}, at: start_transaction+0x40e/0x5f0 [btrfs]
  [162513.520858] 2 locks held by btrfs/1356211:
  [162513.520859]  #0: ffff8f3d810cde30 (&fs_info->dev_replace.lock_finishing_cancel_unmount){+.+.}-{3:3}, at: btrfs_dev_replace_finishing+0x52/0x711 [btrfs]
  [162513.520877]  #1: ffff8f3d57644690 (sb_internal#2){.+.+}-{0:0}, at: start_transaction+0x40e/0x5f0 [btrfs]

This was weird because the stack traces show that a transaction commit,
triggered by a device replace operation, is blocking trying to pause any
running scrubs but there are no stack traces of blocked tasks doing a
scrub.

After poking around with drgn, I noticed there was a scrub task that was
constantly running and blocking for shorts periods of time:

  >>> t = find_task(prog, 1356190)
  >>> prog.stack_trace(t)
  #0  __schedule+0x5ce/0xcfc
  #1  schedule+0x46/0xe4
  #2  schedule_timeout+0x1df/0x475
  #3  btrfs_reada_wait+0xda/0x132
  #4  scrub_stripe+0x2a8/0x112f
  #5  scrub_chunk+0xcd/0x134
  #6  scrub_enumerate_chunks+0x29e/0x5ee
  #7  btrfs_scrub_dev+0x2d5/0x91b
  #8  btrfs_ioctl+0x7f5/0x36e7
  #9  __x64_sys_ioctl+0x83/0xb0
  #10 do_syscall_64+0x33/0x77
  #11 entry_SYSCALL_64+0x7c/0x156

Which corresponds to:

int btrfs_reada_wait(void *handle)
{
    struct reada_control *rc = handle;
    struct btrfs_fs_info *fs_info = rc->fs_info;

    while (atomic_read(&rc->elems)) {
        if (!atomic_read(&fs_info->reada_works_cnt))
            reada_start_machine(fs_info);
        wait_event_timeout(rc->wait, atomic_read(&rc->elems) == 0,
                          (HZ + 9) / 10);
    }
(...)

So the counter "rc->elems" was set to 1 and never decreased to 0, causing
the scrub task to loop forever in that function. Then I used the following
script for drgn to check the readahead requests:

  $ cat dump_reada.py
  import sys
  import drgn
  from drgn import NULL, Object, cast, container_of, execscript, \
      reinterpret, sizeof
  from drgn.helpers.linux import *

  mnt_path = b"/home/fdmanana/btrfs-tests/scratch_1"

  mnt = None
  for mnt in for_each_mount(prog, dst = mnt_path):
      pass

  if mnt is None:
      sys.stderr.write(f'Error: mount point {mnt_path} not found\n')
      sys.exit(1)

  fs_info = cast('struct btrfs_fs_info *', mnt.mnt.mnt_sb.s_fs_info)

  def dump_re(re):
      nzones = re.nzones.value_()
      print(f're at {hex(re.value_())}')
      print(f'\t logical {re.logical.value_()}')
      print(f'\t refcnt {re.refcnt.value_()}')
      print(f'\t nzones {nzones}')
      for i in range(nzones):
          dev = re.zones[i].device
          name = dev.name.str.string_()
          print(f'\t\t dev id {dev.devid.value_()} name {name}')
      print()

  for _, e in radix_tree_for_each(fs_info.reada_tree):
      re = cast('struct reada_extent *', e)
      dump_re(re)

  $ drgn dump_reada.py
  re at 0xffff8f3da9d25ad8
          logical 38928384
          refcnt 1
          nzones 1
                 dev id 0 name b'/dev/sdd'
  $

So there was one readahead extent with a single zone corresponding to the
source device of that last device replace operation logged in dmesg/syslog.
Also the ID of that zone's device was 0 which is a special value set in
the source device of a device replace operation when the operation finishes
(constant BTRFS_DEV_REPLACE_DEVID set at btrfs_dev_replace_finishing()),
confirming again that device /dev/sdd was the source of a device replace
operation.

Normally there should be as many zones in the readahead extent as there are
devices, and I wasn't expecting the extent to be in a block group with a
'single' profile, so I went and confirmed with the following drgn script
that there weren't any single profile block groups:

  $ cat dump_block_groups.py
  import sys
  import drgn
  from drgn import NULL, Object, cast, container_of, execscript, \
      reinterpret, sizeof
  from drgn.helpers.linux import *

  mnt_path = b"/home/fdmanana/btrfs-tests/scratch_1"

  mnt = None
  for mnt in for_each_mount(prog, dst = mnt_path):
      pass

  if mnt is None:
      sys.stderr.write(f'Error: mount point {mnt_path} not found\n')
      sys.exit(1)

  fs_info = cast('struct btrfs_fs_info *', mnt.mnt.mnt_sb.s_fs_info)

  BTRFS_BLOCK_GROUP_DATA = (1 << 0)
  BTRFS_BLOCK_GROUP_SYSTEM = (1 << 1)
  BTRFS_BLOCK_GROUP_METADATA = (1 << 2)
  BTRFS_BLOCK_GROUP_RAID0 = (1 << 3)
  BTRFS_BLOCK_GROUP_RAID1 = (1 << 4)
  BTRFS_BLOCK_GROUP_DUP = (1 << 5)
  BTRFS_BLOCK_GROUP_RAID10 = (1 << 6)
  BTRFS_BLOCK_GROUP_RAID5 = (1 << 7)
  BTRFS_BLOCK_GROUP_RAID6 = (1 << 8)
  BTRFS_BLOCK_GROUP_RAID1C3 = (1 << 9)
  BTRFS_BLOCK_GROUP_RAID1C4 = (1 << 10)

  def bg_flags_string(bg):
      flags = bg.flags.value_()
      ret = ''
      if flags & BTRFS_BLOCK_GROUP_DATA:
          ret = 'data'
      if flags & BTRFS_BLOCK_GROUP_METADATA:
          if len(ret) > 0:
              ret += '|'
          ret += 'meta'
      if flags & BTRFS_BLOCK_GROUP_SYSTEM:
          if len(ret) > 0:
              ret += '|'
          ret += 'system'
      if flags & BTRFS_BLOCK_GROUP_RAID0:
          ret += ' raid0'
      elif flags & BTRFS_BLOCK_GROUP_RAID1:
          ret += ' raid1'
      elif flags & BTRFS_BLOCK_GROUP_DUP:
          ret += ' dup'
      elif flags & BTRFS_BLOCK_GROUP_RAID10:
          ret += ' raid10'
      elif flags & BTRFS_BLOCK_GROUP_RAID5:
          ret += ' raid5'
      elif flags & BTRFS_BLOCK_GROUP_RAID6:
          ret += ' raid6'
      elif flags & BTRFS_BLOCK_GROUP_RAID1C3:
          ret += ' raid1c3'
      elif flags & BTRFS_BLOCK_GROUP_RAID1C4:
          ret += ' raid1c4'
      else:
          ret += ' single'

      return ret

  def dump_bg(bg):
      print()
      print(f'block group at {hex(bg.value_())}')
      print(f'\t start {bg.start.value_()} length {bg.length.value_()}')
      print(f'\t flags {bg.flags.value_()} - {bg_flags_string(bg)}')

  bg_root = fs_info.block_group_cache_tree.address_of_()
  for bg in rbtree_inorder_for_each_entry('struct btrfs_block_group', bg_root, 'cache_node'):
      dump_bg(bg)

  $ drgn dump_block_groups.py

  block group at 0xffff8f3d673b0400
         start 22020096 length 16777216
         flags 258 - system raid6

  block group at 0xffff8f3d53ddb400
         start 38797312 length 536870912
         flags 260 - meta raid6

  block group at 0xffff8f3d5f4d9c00
         start 575668224 length 2147483648
         flags 257 - data raid6

  block group at 0xffff8f3d08189000
         start 2723151872 length 67108864
         flags 258 - system raid6

  block group at 0xffff8f3db70ff000
         start 2790260736 length 1073741824
         flags 260 - meta raid6

  block group at 0xffff8f3d5f4dd800
         start 3864002560 length 67108864
         flags 258 - system raid6

  block group at 0xffff8f3d67037000
         start 3931111424 length 2147483648
         flags 257 - data raid6
  $

So there were only 2 reasons left for having a readahead extent with a
single zone: reada_find_zone(), called when creating a readahead extent,
returned NULL either because we failed to find the corresponding block
group or because a memory allocation failed. With some additional and
custom tracing I figured out that on every further ocurrence of the
problem the block group had just been deleted when we were looping to
create the zones for the readahead extent (at reada_find_extent()), so we
ended up with only one zone in the readahead extent, corresponding to a
device that ends up getting replaced.

So after figuring that out it became obvious why the hang happens:

1) Task A starts a scrub on any device of the filesystem, except for
   device /dev/sdd;

2) Task B starts a device replace with /dev/sdd as the source device;

3) Task A calls btrfs_reada_add() from scrub_stripe() and it is currently
   starting to scrub a stripe from block group X. This call to
   btrfs_reada_add() is the one for the extent tree. When btrfs_reada_add()
   calls reada_add_block(), it passes the logical address of the extent
   tree's root node as its 'logical' argument - a value of 38928384;

4) Task A then enters reada_find_extent(), called from reada_add_block().
   It finds there isn't any existing readahead extent for the logical
   address 38928384, so it proceeds to the path of creating a new one.

   It calls btrfs_map_block() to find out which stripes exist for the block
   group X. On the first iteration of the for loop that iterates over the
   stripes, it finds the stripe for device /dev/sdd, so it creates one
   zone for that device and adds it to the readahead extent. Before getting
   into the second iteration of the loop, the cleanup kthread deletes block
   group X because it was empty. So in the iterations for the remaining
   stripes it does not add more zones to the readahead extent, because the
   calls to reada_find_zone() returned NULL because they couldn't find
   block group X anymore.

   As a result the new readahead extent has a single zone, corresponding to
   the device /dev/sdd;

4) Before task A returns to btrfs_reada_add() and queues the readahead job
   for the readahead work queue, task B finishes the device replace and at
   btrfs_dev_replace_finishing() swaps the device /dev/sdd with the new
   device /dev/sdg;

5) Task A returns to reada_add_block(), which increments the counter
   "->elems" of the reada_control structure allocated at btrfs_reada_add().

   Then it returns back to btrfs_reada_add() and calls
   reada_start_machine(). This queues a job in the readahead work queue to
   run the function reada_start_machine_worker(), which calls
   __reada_start_machine().

   At __reada_start_machine() we take the device list mutex and for each
   device found in the current device list, we call
   reada_start_machine_dev() to start the readahead work. However at this
   point the device /dev/sdd was already freed and is not in the device
   list anymore.

   This means the corresponding readahead for the extent at 38928384 is
   never started, and therefore the "->elems" counter of the reada_control
   structure allocated at btrfs_reada_add() never goes down to 0, causing
   the call to btrfs_reada_wait(), done by the scrub task, to wait forever.

Note that the readahead request can be made either after the device replace
started or before it started, however in pratice it is very unlikely that a
device replace is able to start after a readahead request is made and is
able to complete before the readahead request completes - maybe only on a
very small and nearly empty filesystem.

This hang however is not the only problem we can have with readahead and
device removals. When the readahead extent has other zones other than the
one corresponding to the device that is being removed (either by a device
replace or a device remove operation), we risk having a use-after-free on
the device when dropping the last reference of the readahead extent.

For example if we create a readahead extent with two zones, one for the
device /dev/sdd and one for the device /dev/sde:

1) Before the readahead worker starts, the device /dev/sdd is removed,
   and the corresponding btrfs_device structure is freed. However the
   readahead extent still has the zone pointing to the device structure;

2) When the readahead worker starts, it only finds device /dev/sde in the
   current device list of the filesystem;

3) It starts the readahead work, at reada_start_machine_dev(), using the
   device /dev/sde;

4) Then when it finishes reading the extent from device /dev/sde, it calls
   __readahead_hook() which ends up dropping the last reference on the
   readahead extent through the last call to reada_extent_put();

5) At reada_extent_put() it iterates over each zone of the readahead extent
   and attempts to delete an element from the device's 'reada_extents'
   radix tree, resulting in a use-after-free, as the device pointer of the
   zone for /dev/sdd is now stale. We can also access the device after
   dropping the last reference of a zone, through reada_zone_release(),
   also called by reada_extent_put().

And a device remove suffers the same problem, however since it shrinks the
device size down to zero before removing the device, it is very unlikely to
still have readahead requests not completed by the time we free the device,
the only possibility is if the device has a very little space allocated.

While the hang problem is exclusive to scrub, since it is currently the
only user of btrfs_reada_add() and btrfs_reada_wait(), the use-after-free
problem affects any path that triggers readhead, which includes
btree_readahead_hook() and __readahead_hook() (a readahead worker can
trigger readahed for the children of a node) for example - any path that
ends up calling reada_add_block() can trigger the use-after-free after a
device is removed.

So fix this by waiting for any readahead requests for a device to complete
before removing a device, ensuring that while waiting for existing ones no
new ones can be made.

This problem has been around for a very long time - the readahead code was
added in 2011, device remove exists since 2008 and device replace was
introduced in 2013, hard to pick a specific commit for a git Fixes tag.

CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2020-10-26 15:03:59 +01:00
Anand Jain
96c2e067ed btrfs: skip devices without magic signature when mounting
Many things can happen after the device is scanned and before the device
is mounted.  One such thing is losing the BTRFS_MAGIC on the device.
If it happens we still won't free that device from the memory and cause
the userland confusion.

For example: As the BTRFS_IOC_DEV_INFO still carries the device path
which does not have the BTRFS_MAGIC, 'btrfs fi show' still lists
device which does not belong to the filesystem anymore:

  $ mkfs.btrfs -fq -draid1 -mraid1 /dev/sda /dev/sdb
  $ wipefs -a /dev/sdb
  # /dev/sdb does not contain magic signature
  $ mount -o degraded /dev/sda /btrfs
  $ btrfs fi show -m
  Label: none  uuid: 470ec6fb-646b-4464-b3cb-df1b26c527bd
	  Total devices 2 FS bytes used 128.00KiB
	  devid    1 size 3.00GiB used 571.19MiB path /dev/sda
	  devid    2 size 3.00GiB used 571.19MiB path /dev/sdb

We need to distinguish the missing signature and invalid superblock, so
add a specific error code ENODATA for that. This also fixes failure of
fstest btrfs/198.

CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2020-10-07 12:17:59 +02:00
Josef Bacik
92e26df43b btrfs: return error if we're unable to read device stats
I noticed when fixing device stats for seed devices that we simply threw
away the return value from btrfs_search_slot().  This is because we may
not have stat items, but we could very well get an error, and thus miss
reporting the error up the chain.

Fix this by returning ret if it's an actual error, and then stop trying
to init the rest of the devices stats and return the error up the chain.

Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2020-10-07 12:17:58 +02:00
Josef Bacik
124604eb50 btrfs: init device stats for seed devices
We recently started recording device stats across the fleet, and noticed
a large increase in messages such as this

  BTRFS warning (device dm-0): get dev_stats failed, not yet valid

on our tiers that use seed devices for their root devices.  This is
because we do not initialize the device stats for any seed devices if we
have a sprout device and mount using that sprout device.  The basic
steps for reproducing are:

  $ mkfs seed device
  $ mount seed device
  # fill seed device
  $ umount seed device
  $ btrfstune -S 1 seed device
  $ mount seed device
  $ btrfs device add -f sprout device /mnt/wherever
  $ umount /mnt/wherever
  $ mount sprout device /mnt/wherever
  $ btrfs device stats /mnt/wherever

This will fail with the above message in dmesg.

Fix this by iterating over the fs_devices->seed if they exist in
btrfs_init_dev_stats.  This fixed the problem and properly reports the
stats for both devices.

Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ rename to btrfs_device_init_dev_stats ]
Signed-off-by: David Sterba <dsterba@suse.com>
2020-10-07 12:17:58 +02:00
Anand Jain
c83b60c0e4 btrfs: simplify gotos in open_seed_device
The function does not have a common exit block and returns immediatelly
so there's no point having the goto. Remove the two cases.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2020-10-07 12:12:22 +02:00
Anand Jain
e493e8f9bc btrfs: remove unnecessary tmp variable in btrfs_assign_next_active_device()
We can check the argument value directly, no need for the temporary
variable.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2020-10-07 12:12:22 +02:00
Anand Jain
e17125b52b btrfs: use sprout device_list_mutex in btrfs_init_devices_late
On a mounted sprout filesystem, all threads now are using the
sprout::device_list_mutex, and this is the only code using the
seed::device_list_mutex. This patch converts to use the sprouts
fs_info->fs_devices->device_list_mutex.

The same reasoning holds true here, that device delete is holding
the sprout::device_list_mutex.

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2020-10-07 12:12:22 +02:00
Anand Jain
53f8a74cbe btrfs: split and refactor btrfs_sysfs_remove_devices_dir
Similar to btrfs_sysfs_add_devices_dir()'s refactoring, split
btrfs_sysfs_remove_devices_dir() so that we don't have to use the device
argument to indicate whether to free all devices or just one device.

Export btrfs_sysfs_remove_device() as device operations outside of
sysfs.c now calls this instead of btrfs_sysfs_remove_devices_dir().

btrfs_sysfs_remove_devices_dir() is renamed to
btrfs_sysfs_remove_fs_devices() to suite its new role.

Now, no one outside of sysfs.c calls btrfs_sysfs_remove_fs_devices()
so it is redeclared s static. And the same function had to be moved
before its first caller.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2020-10-07 12:12:21 +02:00
Anand Jain
cd36da2e7e btrfs: simplify parameters of btrfs_sysfs_add_devices_dir
When we add a device we need to add it to sysfs, so instead of using the
btrfs_sysfs_add_devices_dir() fs_devices argument to specify whether to
add a device or all of fs_devices, call the helper function directly
btrfs_sysfs_add_device() and thus make it non-static.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2020-10-07 12:12:21 +02:00
Anand Jain
79dae17d8d btrfs: improve device scanning messages
Systems booting without the initramfs seems to scan an unusual kind
of device path (/dev/root). And at a later time, the device is updated
to the correct path. We generally print the process name and PID of the
process scanning the device but we don't capture the same information if
the device path is rescanned with a different pathname.

The current message is too long, so drop the unnecessary UUID and add
process name and PID.

While at this also update the duplicate device warning to include the
process name and PID so the messages are consistent

CC: stable@vger.kernel.org # 4.19+
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=89721
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2020-10-07 12:12:20 +02:00
Goldwyn Rodrigues
c3e1f96c37 btrfs: enumerate the type of exclusive operation in progress
Instead of using a flag bit for exclusive operation, use a variable to
store which exclusive operation is being performed.  Introduce an API
to start and finish an exclusive operation.

This would enable another way for tools to check which operation is
running on why starting an exclusive operation failed. The followup
patch adds a sysfs_notify() to alert userspace when the state changes, so
userspace can perform select() on it to get notified of the change.

This would enable us to enqueue a command which will wait for current
exclusive operation to complete before issuing the next exclusive
operation. This has been done synchronously as opposed to a background
process, or else error collection (if any) will become difficult.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update comments ]
Signed-off-by: David Sterba <dsterba@suse.com>
2020-10-07 12:12:20 +02:00
Josef Bacik
ca10845a56 btrfs: sysfs: init devices outside of the chunk_mutex
While running btrfs/061, btrfs/073, btrfs/078, or btrfs/178 we hit the
following lockdep splat:

  ======================================================
  WARNING: possible circular locking dependency detected
  5.9.0-rc3+ #4 Not tainted
  ------------------------------------------------------
  kswapd0/100 is trying to acquire lock:
  ffff96ecc22ef4a0 (&delayed_node->mutex){+.+.}-{3:3}, at: __btrfs_release_delayed_node.part.0+0x3f/0x330

  but task is already holding lock:
  ffffffff8dd74700 (fs_reclaim){+.+.}-{0:0}, at: __fs_reclaim_acquire+0x5/0x30

  which lock already depends on the new lock.

  the existing dependency chain (in reverse order) is:

  -> #3 (fs_reclaim){+.+.}-{0:0}:
	 fs_reclaim_acquire+0x65/0x80
	 slab_pre_alloc_hook.constprop.0+0x20/0x200
	 kmem_cache_alloc+0x37/0x270
	 alloc_inode+0x82/0xb0
	 iget_locked+0x10d/0x2c0
	 kernfs_get_inode+0x1b/0x130
	 kernfs_get_tree+0x136/0x240
	 sysfs_get_tree+0x16/0x40
	 vfs_get_tree+0x28/0xc0
	 path_mount+0x434/0xc00
	 __x64_sys_mount+0xe3/0x120
	 do_syscall_64+0x33/0x40
	 entry_SYSCALL_64_after_hwframe+0x44/0xa9

  -> #2 (kernfs_mutex){+.+.}-{3:3}:
	 __mutex_lock+0x7e/0x7e0
	 kernfs_add_one+0x23/0x150
	 kernfs_create_link+0x63/0xa0
	 sysfs_do_create_link_sd+0x5e/0xd0
	 btrfs_sysfs_add_devices_dir+0x81/0x130
	 btrfs_init_new_device+0x67f/0x1250
	 btrfs_ioctl+0x1ef/0x2e20
	 __x64_sys_ioctl+0x83/0xb0
	 do_syscall_64+0x33/0x40
	 entry_SYSCALL_64_after_hwframe+0x44/0xa9

  -> #1 (&fs_info->chunk_mutex){+.+.}-{3:3}:
	 __mutex_lock+0x7e/0x7e0
	 btrfs_chunk_alloc+0x125/0x3a0
	 find_free_extent+0xdf6/0x1210
	 btrfs_reserve_extent+0xb3/0x1b0
	 btrfs_alloc_tree_block+0xb0/0x310
	 alloc_tree_block_no_bg_flush+0x4a/0x60
	 __btrfs_cow_block+0x11a/0x530
	 btrfs_cow_block+0x104/0x220
	 btrfs_search_slot+0x52e/0x9d0
	 btrfs_insert_empty_items+0x64/0xb0
	 btrfs_insert_delayed_items+0x90/0x4f0
	 btrfs_commit_inode_delayed_items+0x93/0x140
	 btrfs_log_inode+0x5de/0x2020
	 btrfs_log_inode_parent+0x429/0xc90
	 btrfs_log_new_name+0x95/0x9b
	 btrfs_rename2+0xbb9/0x1800
	 vfs_rename+0x64f/0x9f0
	 do_renameat2+0x320/0x4e0
	 __x64_sys_rename+0x1f/0x30
	 do_syscall_64+0x33/0x40
	 entry_SYSCALL_64_after_hwframe+0x44/0xa9

  -> #0 (&delayed_node->mutex){+.+.}-{3:3}:
	 __lock_acquire+0x119c/0x1fc0
	 lock_acquire+0xa7/0x3d0
	 __mutex_lock+0x7e/0x7e0
	 __btrfs_release_delayed_node.part.0+0x3f/0x330
	 btrfs_evict_inode+0x24c/0x500
	 evict+0xcf/0x1f0
	 dispose_list+0x48/0x70
	 prune_icache_sb+0x44/0x50
	 super_cache_scan+0x161/0x1e0
	 do_shrink_slab+0x178/0x3c0
	 shrink_slab+0x17c/0x290
	 shrink_node+0x2b2/0x6d0
	 balance_pgdat+0x30a/0x670
	 kswapd+0x213/0x4c0
	 kthread+0x138/0x160
	 ret_from_fork+0x1f/0x30

  other info that might help us debug this:

  Chain exists of:
    &delayed_node->mutex --> kernfs_mutex --> fs_reclaim

   Possible unsafe locking scenario:

	 CPU0                    CPU1
	 ----                    ----
    lock(fs_reclaim);
				 lock(kernfs_mutex);
				 lock(fs_reclaim);
    lock(&delayed_node->mutex);

   *** DEADLOCK ***

  3 locks held by kswapd0/100:
   #0: ffffffff8dd74700 (fs_reclaim){+.+.}-{0:0}, at: __fs_reclaim_acquire+0x5/0x30
   #1: ffffffff8dd65c50 (shrinker_rwsem){++++}-{3:3}, at: shrink_slab+0x115/0x290
   #2: ffff96ed2ade30e0 (&type->s_umount_key#36){++++}-{3:3}, at: super_cache_scan+0x38/0x1e0

  stack backtrace:
  CPU: 0 PID: 100 Comm: kswapd0 Not tainted 5.9.0-rc3+ #4
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
  Call Trace:
   dump_stack+0x8b/0xb8
   check_noncircular+0x12d/0x150
   __lock_acquire+0x119c/0x1fc0
   lock_acquire+0xa7/0x3d0
   ? __btrfs_release_delayed_node.part.0+0x3f/0x330
   __mutex_lock+0x7e/0x7e0
   ? __btrfs_release_delayed_node.part.0+0x3f/0x330
   ? __btrfs_release_delayed_node.part.0+0x3f/0x330
   ? lock_acquire+0xa7/0x3d0
   ? find_held_lock+0x2b/0x80
   __btrfs_release_delayed_node.part.0+0x3f/0x330
   btrfs_evict_inode+0x24c/0x500
   evict+0xcf/0x1f0
   dispose_list+0x48/0x70
   prune_icache_sb+0x44/0x50
   super_cache_scan+0x161/0x1e0
   do_shrink_slab+0x178/0x3c0
   shrink_slab+0x17c/0x290
   shrink_node+0x2b2/0x6d0
   balance_pgdat+0x30a/0x670
   kswapd+0x213/0x4c0
   ? _raw_spin_unlock_irqrestore+0x41/0x50
   ? add_wait_queue_exclusive+0x70/0x70
   ? balance_pgdat+0x670/0x670
   kthread+0x138/0x160
   ? kthread_create_worker_on_cpu+0x40/0x40
   ret_from_fork+0x1f/0x30

This happens because we are holding the chunk_mutex at the time of
adding in a new device.  However we only need to hold the
device_list_mutex, as we're going to iterate over the fs_devices
devices.  Move the sysfs init stuff outside of the chunk_mutex to get
rid of this lockdep splat.

CC: stable@vger.kernel.org # 4.4.x: f3cd2c5811: btrfs: sysfs, rename device_link add/remove functions
CC: stable@vger.kernel.org # 4.4.x
Reported-by: David Sterba <dsterba@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2020-10-07 12:12:19 +02:00
Nikolay Borisov
b9ba017fb0 btrfs: don't opencode sync_blockdev in btrfs_init_new_device
Instead of opencoding filemap_write_and_wait simply call syncblockdev as
it makes it abundantly clear what's going on and why this is used. No
semantics changes.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2020-10-07 12:12:15 +02:00
Nikolay Borisov
4ae312e972 btrfs: remove redundant code from btrfs_free_stale_devices
Following the refactor of btrfs_free_stale_devices in
7bcb8164ad ("btrfs: use device_list_mutex when removing stale devices")
fs_devices are freed after they have been iterated by the inner
list_for_each so the use-after-free fixed by introducing the break in
fd649f10c3 ("btrfs: Fix use-after-free when cleaning up fs_devs with
a single stale device") is no longer necessary. Just remove it
altogether. No functional changes.

Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2020-10-07 12:12:15 +02:00
Nikolay Borisov
44cab9ba37 btrfs: refactor locked condition in btrfs_init_new_device
Invert unlocked to locked and exploit the fact it can only ever be
modified if we are adding a new device to a seed filesystem. This allows
to simplify the check in error: label. No semantics changes.

Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2020-10-07 12:12:15 +02:00
Nikolay Borisov
f4cfa9bdd4 btrfs: use RCU for quick device check in btrfs_init_new_device
When adding a new device there's a mandatory check to see if a device is
being duplicated to the filesystem it's added to. Since this is a
read-only operations not necessary to take device_list_mutex and can simply
make do with an rcu-readlock.

Using just RCU is safe because there won't be another device add delete
running in parallel as btrfs_init_new_device is called only from
btrfs_ioctl_add_dev.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2020-10-07 12:12:15 +02:00
Josef Bacik
425c6ed648 btrfs: do not hold device_list_mutex when closing devices
The following lockdep splat

======================================================
WARNING: possible circular locking dependency detected
5.8.0-rc7-00169-g87212851a027-dirty #929 Not tainted
------------------------------------------------------
fsstress/8739 is trying to acquire lock:
ffff88bfd0eb0c90 (&fs_info->reloc_mutex){+.+.}-{3:3}, at: btrfs_record_root_in_trans+0x43/0x70

but task is already holding lock:
ffff88bfbd16e538 (sb_pagefaults){.+.+}-{0:0}, at: btrfs_page_mkwrite+0x6a/0x4a0

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #10 (sb_pagefaults){.+.+}-{0:0}:
       __sb_start_write+0x129/0x210
       btrfs_page_mkwrite+0x6a/0x4a0
       do_page_mkwrite+0x4d/0xc0
       handle_mm_fault+0x103c/0x1730
       exc_page_fault+0x340/0x660
       asm_exc_page_fault+0x1e/0x30

-> #9 (&mm->mmap_lock#2){++++}-{3:3}:
       __might_fault+0x68/0x90
       _copy_to_user+0x1e/0x80
       perf_read+0x141/0x2c0
       vfs_read+0xad/0x1b0
       ksys_read+0x5f/0xe0
       do_syscall_64+0x50/0x90
       entry_SYSCALL_64_after_hwframe+0x44/0xa9

-> #8 (&cpuctx_mutex){+.+.}-{3:3}:
       __mutex_lock+0x9f/0x930
       perf_event_init_cpu+0x88/0x150
       perf_event_init+0x1db/0x20b
       start_kernel+0x3ae/0x53c
       secondary_startup_64+0xa4/0xb0

-> #7 (pmus_lock){+.+.}-{3:3}:
       __mutex_lock+0x9f/0x930
       perf_event_init_cpu+0x4f/0x150
       cpuhp_invoke_callback+0xb1/0x900
       _cpu_up.constprop.26+0x9f/0x130
       cpu_up+0x7b/0xc0
       bringup_nonboot_cpus+0x4f/0x60
       smp_init+0x26/0x71
       kernel_init_freeable+0x110/0x258
       kernel_init+0xa/0x103
       ret_from_fork+0x1f/0x30

-> #6 (cpu_hotplug_lock){++++}-{0:0}:
       cpus_read_lock+0x39/0xb0
       kmem_cache_create_usercopy+0x28/0x230
       kmem_cache_create+0x12/0x20
       bioset_init+0x15e/0x2b0
       init_bio+0xa3/0xaa
       do_one_initcall+0x5a/0x2e0
       kernel_init_freeable+0x1f4/0x258
       kernel_init+0xa/0x103
       ret_from_fork+0x1f/0x30

-> #5 (bio_slab_lock){+.+.}-{3:3}:
       __mutex_lock+0x9f/0x930
       bioset_init+0xbc/0x2b0
       __blk_alloc_queue+0x6f/0x2d0
       blk_mq_init_queue_data+0x1b/0x70
       loop_add+0x110/0x290 [loop]
       fq_codel_tcf_block+0x12/0x20 [sch_fq_codel]
       do_one_initcall+0x5a/0x2e0
       do_init_module+0x5a/0x220
       load_module+0x2459/0x26e0
       __do_sys_finit_module+0xba/0xe0
       do_syscall_64+0x50/0x90
       entry_SYSCALL_64_after_hwframe+0x44/0xa9

-> #4 (loop_ctl_mutex){+.+.}-{3:3}:
       __mutex_lock+0x9f/0x930
       lo_open+0x18/0x50 [loop]
       __blkdev_get+0xec/0x570
       blkdev_get+0xe8/0x150
       do_dentry_open+0x167/0x410
       path_openat+0x7c9/0xa80
       do_filp_open+0x93/0x100
       do_sys_openat2+0x22a/0x2e0
       do_sys_open+0x4b/0x80
       do_syscall_64+0x50/0x90
       entry_SYSCALL_64_after_hwframe+0x44/0xa9

-> #3 (&bdev->bd_mutex){+.+.}-{3:3}:
       __mutex_lock+0x9f/0x930
       blkdev_put+0x1d/0x120
       close_fs_devices.part.31+0x84/0x130
       btrfs_close_devices+0x44/0xb0
       close_ctree+0x296/0x2b2
       generic_shutdown_super+0x69/0x100
       kill_anon_super+0xe/0x30
       btrfs_kill_super+0x12/0x20
       deactivate_locked_super+0x29/0x60
       cleanup_mnt+0xb8/0x140
       task_work_run+0x6d/0xb0
       __prepare_exit_to_usermode+0x1cc/0x1e0
       do_syscall_64+0x5c/0x90
       entry_SYSCALL_64_after_hwframe+0x44/0xa9

-> #2 (&fs_devs->device_list_mutex){+.+.}-{3:3}:
       __mutex_lock+0x9f/0x930
       btrfs_run_dev_stats+0x49/0x480
       commit_cowonly_roots+0xb5/0x2a0
       btrfs_commit_transaction+0x516/0xa60
       sync_filesystem+0x6b/0x90
       generic_shutdown_super+0x22/0x100
       kill_anon_super+0xe/0x30
       btrfs_kill_super+0x12/0x20
       deactivate_locked_super+0x29/0x60
       cleanup_mnt+0xb8/0x140
       task_work_run+0x6d/0xb0
       __prepare_exit_to_usermode+0x1cc/0x1e0
       do_syscall_64+0x5c/0x90
       entry_SYSCALL_64_after_hwframe+0x44/0xa9

-> #1 (&fs_info->tree_log_mutex){+.+.}-{3:3}:
       __mutex_lock+0x9f/0x930
       btrfs_commit_transaction+0x4bb/0xa60
       sync_filesystem+0x6b/0x90
       generic_shutdown_super+0x22/0x100
       kill_anon_super+0xe/0x30
       btrfs_kill_super+0x12/0x20
       deactivate_locked_super+0x29/0x60
       cleanup_mnt+0xb8/0x140
       task_work_run+0x6d/0xb0
       __prepare_exit_to_usermode+0x1cc/0x1e0
       do_syscall_64+0x5c/0x90
       entry_SYSCALL_64_after_hwframe+0x44/0xa9

-> #0 (&fs_info->reloc_mutex){+.+.}-{3:3}:
       __lock_acquire+0x1272/0x2310
       lock_acquire+0x9e/0x360
       __mutex_lock+0x9f/0x930
       btrfs_record_root_in_trans+0x43/0x70
       start_transaction+0xd1/0x5d0
       btrfs_dirty_inode+0x42/0xd0
       file_update_time+0xc8/0x110
       btrfs_page_mkwrite+0x10c/0x4a0
       do_page_mkwrite+0x4d/0xc0
       handle_mm_fault+0x103c/0x1730
       exc_page_fault+0x340/0x660
       asm_exc_page_fault+0x1e/0x30

other info that might help us debug this:

Chain exists of:
  &fs_info->reloc_mutex --> &mm->mmap_lock#2 --> sb_pagefaults

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(sb_pagefaults);
                               lock(&mm->mmap_lock#2);
                               lock(sb_pagefaults);
  lock(&fs_info->reloc_mutex);

 *** DEADLOCK ***

3 locks held by fsstress/8739:
 #0: ffff88bee66eeb68 (&mm->mmap_lock#2){++++}-{3:3}, at: exc_page_fault+0x173/0x660
 #1: ffff88bfbd16e538 (sb_pagefaults){.+.+}-{0:0}, at: btrfs_page_mkwrite+0x6a/0x4a0
 #2: ffff88bfbd16e630 (sb_internal){.+.+}-{0:0}, at: start_transaction+0x3da/0x5d0

stack backtrace:
CPU: 17 PID: 8739 Comm: fsstress Kdump: loaded Not tainted 5.8.0-rc7-00169-g87212851a027-dirty #929
Hardware name: Quanta Tioga Pass Single Side 01-0030993006/Tioga Pass Single Side, BIOS F08_3A18 12/20/2018
Call Trace:
 dump_stack+0x78/0xa0
 check_noncircular+0x165/0x180
 __lock_acquire+0x1272/0x2310
 ? btrfs_get_alloc_profile+0x150/0x210
 lock_acquire+0x9e/0x360
 ? btrfs_record_root_in_trans+0x43/0x70
 __mutex_lock+0x9f/0x930
 ? btrfs_record_root_in_trans+0x43/0x70
 ? lock_acquire+0x9e/0x360
 ? join_transaction+0x5d/0x450
 ? find_held_lock+0x2d/0x90
 ? btrfs_record_root_in_trans+0x43/0x70
 ? join_transaction+0x3d5/0x450
 ? btrfs_record_root_in_trans+0x43/0x70
 btrfs_record_root_in_trans+0x43/0x70
 start_transaction+0xd1/0x5d0
 btrfs_dirty_inode+0x42/0xd0
 file_update_time+0xc8/0x110
 btrfs_page_mkwrite+0x10c/0x4a0
 ? handle_mm_fault+0x5e/0x1730
 do_page_mkwrite+0x4d/0xc0
 ? __do_fault+0x32/0x150
 handle_mm_fault+0x103c/0x1730
 exc_page_fault+0x340/0x660
 ? asm_exc_page_fault+0x8/0x30
 asm_exc_page_fault+0x1e/0x30
RIP: 0033:0x7faa6c9969c4

Was seen in testing.  The fix is similar to that of

  btrfs: open device without device_list_mutex

where we're holding the device_list_mutex and then grab the bd_mutex,
which pulls in a bunch of dependencies under the bd_mutex.  We only ever
call btrfs_close_devices() on mount failure or unmount, so we're save to
not have the device_list_mutex here.  We're already holding the
uuid_mutex which keeps us safe from any external modification of the
fs_devices.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2020-10-07 12:12:13 +02:00