This function takes the necessary rcu read lock to dereference the
client's rpc_xprt_switch and bump the reference count so it doesn't
disappear underneath us before returning. This does mean that callers
are responsible for calling xprt_switch_put() on the returned object
when they are done with it.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
We don't use the rpc_xprt_switch anywhere in this function, so let's not
take an extra reference to in unnecessarily.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Guillaume says:
> I believe commit 5f7fc5d69f ("SUNRPC: Resupply rq_pages from
> node-local memory") in Linux 6.5+ is incorrect. It passes
> unconditionally rq_pool->sp_id as the NUMA node.
>
> While the comment in the svc_pool declaration in sunrpc/svc.h says
> that sp_id is also the NUMA node id, it might not be the case if
> the svc is created using svc_create_pooled(). svc_created_pooled()
> can use the per-cpu pool mode therefore in this case sp_id would
> be the cpu id.
Fix this by reverting now. At a later point this minor optimization,
and the deceptive labeling of the sp_id field, can be revisited.
Reported-by: Guillaume Morin <guillaume@morinfr.org>
Closes: https://lore.kernel.org/linux-nfs/ZYC9rsno8qYggVt9@bender.morinfr.org/T/#u
Fixes: 5f7fc5d69f ("SUNRPC: Resupply rq_pages from node-local memory")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
This code is rarely (never?) enabled by distros, and it hasn't caught
anything in decades. Let's kill off this legacy debug code.
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
strlcpy() reads the entire source buffer first. This read may exceed
the destination size limit. This is both inefficient and can lead
to linear read overflows if a source string is not NUL-terminated[1].
Additionally, it returns the size of the source string, not the
resulting size of the destination string. In an effort to remove strlcpy()
completely[2], replace strlcpy() here with strscpy().
Explicitly handle the truncation case by returning the size of the
resulting string.
If "nodename" was ever longer than sizeof(clnt->cl_nodename) - 1, this
change will fix a bug where clnt->cl_nodelen would end up thinking there
were more characters in clnt->cl_nodename than there actually were,
which might have lead to kernel memory content exposures.
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Neil Brown <neilb@suse.de>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: linux-nfs@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy [1]
Link: https://github.com/KSPP/linux/issues/89 [2]
Co-developed-by: Azeem Shaikh <azeemshaikh38@gmail.com>
Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com>
Reviewed-by: NeilBrown <neilb@suse.de>
Link: https://lore.kernel.org/r/20231114175407.work.410-kees@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Highlights include:
Bugfixes:
- SUNRPC: A fix to re-probe the target RPC port after an ECONNRESET error
- SUNRPC: Handle allocation errors from rpcb_call_async()
- SUNRPC: Fix a use-after-free condition in rpc_pipefs
- SUNRPC: fix up various checks for timeouts
- NFSv4.1: Handle NFS4ERR_DELAY errors during session trunking
- NFSv4.1: fix SP4_MACH_CRED protection for pnfs IO
- NFSv4: Ensure that we test all delegations when the server notifies
us that it may have revoked some of them
Features:
- Allow knfsd processes to break out of NFS4ERR_DELAY loops when
re-exporting NFSv4.x by setting appropriate values for the
'delay_retrans' module parameter.
- nfs: Convert nfs_symlink() to use a folio
-----BEGIN PGP SIGNATURE-----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=TNRl
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-6.7-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Bugfixes:
- SUNRPC:
- re-probe the target RPC port after an ECONNRESET error
- handle allocation errors from rpcb_call_async()
- fix a use-after-free condition in rpc_pipefs
- fix up various checks for timeouts
- NFSv4.1:
- Handle NFS4ERR_DELAY errors during session trunking
- fix SP4_MACH_CRED protection for pnfs IO
- NFSv4:
- Ensure that we test all delegations when the server notifies
us that it may have revoked some of them
Features:
- Allow knfsd processes to break out of NFS4ERR_DELAY loops when
re-exporting NFSv4.x by setting appropriate values for the
'delay_retrans' module parameter
- nfs: Convert nfs_symlink() to use a folio"
* tag 'nfs-for-6.7-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
nfs: Convert nfs_symlink() to use a folio
SUNRPC: Fix RPC client cleaned up the freed pipefs dentries
NFSv4.1: fix SP4_MACH_CRED protection for pnfs IO
SUNRPC: Add an IS_ERR() check back to where it was
NFSv4.1: fix handling NFS4ERR_DELAY when testing for session trunking
nfs41: drop dependency between flexfiles layout driver and NFSv3 modules
NFSv4: fairly test all delegations on a SEQ4_ revocation
SUNRPC: SOFTCONN tasks should time out when on the sending list
SUNRPC: Force close the socket when a hard error is reported
SUNRPC: Don't skip timeout checks in call_connect_status()
SUNRPC: ECONNRESET might require a rebind
NFSv4/pnfs: Allow layoutget to return EAGAIN for softerr mounts
NFSv4: Add a parameter to limit the number of retries after NFS4ERR_DELAY
included in this merge do the following:
- Kemeng Shi has contributed some compation maintenance work in the
series "Fixes and cleanups to compaction".
- Joel Fernandes has a patchset ("Optimize mremap during mutual
alignment within PMD") which fixes an obscure issue with mremap()'s
pagetable handling during a subsequent exec(), based upon an
implementation which Linus suggested.
- More DAMON/DAMOS maintenance and feature work from SeongJae Park i the
following patch series:
mm/damon: misc fixups for documents, comments and its tracepoint
mm/damon: add a tracepoint for damos apply target regions
mm/damon: provide pseudo-moving sum based access rate
mm/damon: implement DAMOS apply intervals
mm/damon/core-test: Fix memory leaks in core-test
mm/damon/sysfs-schemes: Do DAMOS tried regions update for only one apply interval
- In the series "Do not try to access unaccepted memory" Adrian Hunter
provides some fixups for the recently-added "unaccepted memory' feature.
To increase the feature's checking coverage. "Plug a few gaps where
RAM is exposed without checking if it is unaccepted memory".
- In the series "cleanups for lockless slab shrink" Qi Zheng has done
some maintenance work which is preparation for the lockless slab
shrinking code.
- Qi Zheng has redone the earlier (and reverted) attempt to make slab
shrinking lockless in the series "use refcount+RCU method to implement
lockless slab shrink".
- David Hildenbrand contributes some maintenance work for the rmap code
in the series "Anon rmap cleanups".
- Kefeng Wang does more folio conversions and some maintenance work in
the migration code. Series "mm: migrate: more folio conversion and
unification".
- Matthew Wilcox has fixed an issue in the buffer_head code which was
causing long stalls under some heavy memory/IO loads. Some cleanups
were added on the way. Series "Add and use bdev_getblk()".
- In the series "Use nth_page() in place of direct struct page
manipulation" Zi Yan has fixed a potential issue with the direct
manipulation of hugetlb page frames.
- In the series "mm: hugetlb: Skip initialization of gigantic tail
struct pages if freed by HVO" has improved our handling of gigantic
pages in the hugetlb vmmemmep optimizaton code. This provides
significant boot time improvements when significant amounts of gigantic
pages are in use.
- Matthew Wilcox has sent the series "Small hugetlb cleanups" - code
rationalization and folio conversions in the hugetlb code.
- Yin Fengwei has improved mlock()'s handling of large folios in the
series "support large folio for mlock"
- In the series "Expose swapcache stat for memcg v1" Liu Shixin has
added statistics for memcg v1 users which are available (and useful)
under memcg v2.
- Florent Revest has enhanced the MDWE (Memory-Deny-Write-Executable)
prctl so that userspace may direct the kernel to not automatically
propagate the denial to child processes. The series is named "MDWE
without inheritance".
- Kefeng Wang has provided the series "mm: convert numa balancing
functions to use a folio" which does what it says.
- In the series "mm/ksm: add fork-exec support for prctl" Stefan Roesch
makes is possible for a process to propagate KSM treatment across
exec().
- Huang Ying has enhanced memory tiering's calculation of memory
distances. This is used to permit the dax/kmem driver to use "high
bandwidth memory" in addition to Optane Data Center Persistent Memory
Modules (DCPMM). The series is named "memory tiering: calculate
abstract distance based on ACPI HMAT"
- In the series "Smart scanning mode for KSM" Stefan Roesch has
optimized KSM by teaching it to retain and use some historical
information from previous scans.
- Yosry Ahmed has fixed some inconsistencies in memcg statistics in the
series "mm: memcg: fix tracking of pending stats updates values".
- In the series "Implement IOCTL to get and optionally clear info about
PTEs" Peter Xu has added an ioctl to /proc/<pid>/pagemap which permits
us to atomically read-then-clear page softdirty state. This is mainly
used by CRIU.
- Hugh Dickins contributed the series "shmem,tmpfs: general maintenance"
- a bunch of relatively minor maintenance tweaks to this code.
- Matthew Wilcox has increased the use of the VMA lock over file-backed
page faults in the series "Handle more faults under the VMA lock". Some
rationalizations of the fault path became possible as a result.
- In the series "mm/rmap: convert page_move_anon_rmap() to
folio_move_anon_rmap()" David Hildenbrand has implemented some cleanups
and folio conversions.
- In the series "various improvements to the GUP interface" Lorenzo
Stoakes has simplified and improved the GUP interface with an eye to
providing groundwork for future improvements.
- Andrey Konovalov has sent along the series "kasan: assorted fixes and
improvements" which does those things.
- Some page allocator maintenance work from Kemeng Shi in the series
"Two minor cleanups to break_down_buddy_pages".
- In thes series "New selftest for mm" Breno Leitao has developed
another MM self test which tickles a race we had between madvise() and
page faults.
- In the series "Add folio_end_read" Matthew Wilcox provides cleanups
and an optimization to the core pagecache code.
- Nhat Pham has added memcg accounting for hugetlb memory in the series
"hugetlb memcg accounting".
- Cleanups and rationalizations to the pagemap code from Lorenzo
Stoakes, in the series "Abstract vma_merge() and split_vma()".
- Audra Mitchell has fixed issues in the procfs page_owner code's new
timestamping feature which was causing some misbehaviours. In the
series "Fix page_owner's use of free timestamps".
- Lorenzo Stoakes has fixed the handling of new mappings of sealed files
in the series "permit write-sealed memfd read-only shared mappings".
- Mike Kravetz has optimized the hugetlb vmemmap optimization in the
series "Batch hugetlb vmemmap modification operations".
- Some buffer_head folio conversions and cleanups from Matthew Wilcox in
the series "Finish the create_empty_buffers() transition".
- As a page allocator performance optimization Huang Ying has added
automatic tuning to the allocator's per-cpu-pages feature, in the series
"mm: PCP high auto-tuning".
- Roman Gushchin has contributed the patchset "mm: improve performance
of accounted kernel memory allocations" which improves their performance
by ~30% as measured by a micro-benchmark.
- folio conversions from Kefeng Wang in the series "mm: convert page
cpupid functions to folios".
- Some kmemleak fixups in Liu Shixin's series "Some bugfix about
kmemleak".
- Qi Zheng has improved our handling of memoryless nodes by keeping them
off the allocation fallback list. This is done in the series "handle
memoryless nodes more appropriately".
- khugepaged conversions from Vishal Moola in the series "Some
khugepaged folio conversions".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZULEMwAKCRDdBJ7gKXxA
jhQHAQCYpD3g849x69DmHnHWHm/EHQLvQmRMDeYZI+nx/sCJOwEAw4AKg0Oemv9y
FgeUPAD1oasg6CP+INZvCj34waNxwAc=
=E+Y4
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-11-01-14-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Many singleton patches against the MM code. The patch series which are
included in this merge do the following:
- Kemeng Shi has contributed some compation maintenance work in the
series 'Fixes and cleanups to compaction'
- Joel Fernandes has a patchset ('Optimize mremap during mutual
alignment within PMD') which fixes an obscure issue with mremap()'s
pagetable handling during a subsequent exec(), based upon an
implementation which Linus suggested
- More DAMON/DAMOS maintenance and feature work from SeongJae Park i
the following patch series:
mm/damon: misc fixups for documents, comments and its tracepoint
mm/damon: add a tracepoint for damos apply target regions
mm/damon: provide pseudo-moving sum based access rate
mm/damon: implement DAMOS apply intervals
mm/damon/core-test: Fix memory leaks in core-test
mm/damon/sysfs-schemes: Do DAMOS tried regions update for only one apply interval
- In the series 'Do not try to access unaccepted memory' Adrian
Hunter provides some fixups for the recently-added 'unaccepted
memory' feature. To increase the feature's checking coverage. 'Plug
a few gaps where RAM is exposed without checking if it is
unaccepted memory'
- In the series 'cleanups for lockless slab shrink' Qi Zheng has done
some maintenance work which is preparation for the lockless slab
shrinking code
- Qi Zheng has redone the earlier (and reverted) attempt to make slab
shrinking lockless in the series 'use refcount+RCU method to
implement lockless slab shrink'
- David Hildenbrand contributes some maintenance work for the rmap
code in the series 'Anon rmap cleanups'
- Kefeng Wang does more folio conversions and some maintenance work
in the migration code. Series 'mm: migrate: more folio conversion
and unification'
- Matthew Wilcox has fixed an issue in the buffer_head code which was
causing long stalls under some heavy memory/IO loads. Some cleanups
were added on the way. Series 'Add and use bdev_getblk()'
- In the series 'Use nth_page() in place of direct struct page
manipulation' Zi Yan has fixed a potential issue with the direct
manipulation of hugetlb page frames
- In the series 'mm: hugetlb: Skip initialization of gigantic tail
struct pages if freed by HVO' has improved our handling of gigantic
pages in the hugetlb vmmemmep optimizaton code. This provides
significant boot time improvements when significant amounts of
gigantic pages are in use
- Matthew Wilcox has sent the series 'Small hugetlb cleanups' - code
rationalization and folio conversions in the hugetlb code
- Yin Fengwei has improved mlock()'s handling of large folios in the
series 'support large folio for mlock'
- In the series 'Expose swapcache stat for memcg v1' Liu Shixin has
added statistics for memcg v1 users which are available (and
useful) under memcg v2
- Florent Revest has enhanced the MDWE (Memory-Deny-Write-Executable)
prctl so that userspace may direct the kernel to not automatically
propagate the denial to child processes. The series is named 'MDWE
without inheritance'
- Kefeng Wang has provided the series 'mm: convert numa balancing
functions to use a folio' which does what it says
- In the series 'mm/ksm: add fork-exec support for prctl' Stefan
Roesch makes is possible for a process to propagate KSM treatment
across exec()
- Huang Ying has enhanced memory tiering's calculation of memory
distances. This is used to permit the dax/kmem driver to use 'high
bandwidth memory' in addition to Optane Data Center Persistent
Memory Modules (DCPMM). The series is named 'memory tiering:
calculate abstract distance based on ACPI HMAT'
- In the series 'Smart scanning mode for KSM' Stefan Roesch has
optimized KSM by teaching it to retain and use some historical
information from previous scans
- Yosry Ahmed has fixed some inconsistencies in memcg statistics in
the series 'mm: memcg: fix tracking of pending stats updates
values'
- In the series 'Implement IOCTL to get and optionally clear info
about PTEs' Peter Xu has added an ioctl to /proc/<pid>/pagemap
which permits us to atomically read-then-clear page softdirty
state. This is mainly used by CRIU
- Hugh Dickins contributed the series 'shmem,tmpfs: general
maintenance', a bunch of relatively minor maintenance tweaks to
this code
- Matthew Wilcox has increased the use of the VMA lock over
file-backed page faults in the series 'Handle more faults under the
VMA lock'. Some rationalizations of the fault path became possible
as a result
- In the series 'mm/rmap: convert page_move_anon_rmap() to
folio_move_anon_rmap()' David Hildenbrand has implemented some
cleanups and folio conversions
- In the series 'various improvements to the GUP interface' Lorenzo
Stoakes has simplified and improved the GUP interface with an eye
to providing groundwork for future improvements
- Andrey Konovalov has sent along the series 'kasan: assorted fixes
and improvements' which does those things
- Some page allocator maintenance work from Kemeng Shi in the series
'Two minor cleanups to break_down_buddy_pages'
- In thes series 'New selftest for mm' Breno Leitao has developed
another MM self test which tickles a race we had between madvise()
and page faults
- In the series 'Add folio_end_read' Matthew Wilcox provides cleanups
and an optimization to the core pagecache code
- Nhat Pham has added memcg accounting for hugetlb memory in the
series 'hugetlb memcg accounting'
- Cleanups and rationalizations to the pagemap code from Lorenzo
Stoakes, in the series 'Abstract vma_merge() and split_vma()'
- Audra Mitchell has fixed issues in the procfs page_owner code's new
timestamping feature which was causing some misbehaviours. In the
series 'Fix page_owner's use of free timestamps'
- Lorenzo Stoakes has fixed the handling of new mappings of sealed
files in the series 'permit write-sealed memfd read-only shared
mappings'
- Mike Kravetz has optimized the hugetlb vmemmap optimization in the
series 'Batch hugetlb vmemmap modification operations'
- Some buffer_head folio conversions and cleanups from Matthew Wilcox
in the series 'Finish the create_empty_buffers() transition'
- As a page allocator performance optimization Huang Ying has added
automatic tuning to the allocator's per-cpu-pages feature, in the
series 'mm: PCP high auto-tuning'
- Roman Gushchin has contributed the patchset 'mm: improve
performance of accounted kernel memory allocations' which improves
their performance by ~30% as measured by a micro-benchmark
- folio conversions from Kefeng Wang in the series 'mm: convert page
cpupid functions to folios'
- Some kmemleak fixups in Liu Shixin's series 'Some bugfix about
kmemleak'
- Qi Zheng has improved our handling of memoryless nodes by keeping
them off the allocation fallback list. This is done in the series
'handle memoryless nodes more appropriately'
- khugepaged conversions from Vishal Moola in the series 'Some
khugepaged folio conversions'"
[ bcachefs conflicts with the dynamically allocated shrinkers have been
resolved as per Stephen Rothwell in
https://lore.kernel.org/all/20230913093553.4290421e@canb.auug.org.au/
with help from Qi Zheng.
The clone3 test filtering conflict was half-arsed by yours truly ]
* tag 'mm-stable-2023-11-01-14-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (406 commits)
mm/damon/sysfs: update monitoring target regions for online input commit
mm/damon/sysfs: remove requested targets when online-commit inputs
selftests: add a sanity check for zswap
Documentation: maple_tree: fix word spelling error
mm/vmalloc: fix the unchecked dereference warning in vread_iter()
zswap: export compression failure stats
Documentation: ubsan: drop "the" from article title
mempolicy: migration attempt to match interleave nodes
mempolicy: mmap_lock is not needed while migrating folios
mempolicy: alloc_pages_mpol() for NUMA policy without vma
mm: add page_rmappable_folio() wrapper
mempolicy: remove confusing MPOL_MF_LAZY dead code
mempolicy: mpol_shared_policy_init() without pseudo-vma
mempolicy trivia: use pgoff_t in shared mempolicy tree
mempolicy trivia: slightly more consistent naming
mempolicy trivia: delete those ancient pr_debug()s
mempolicy: fix migrate_pages(2) syscall return nr_failed
kernfs: drop shared NUMA mempolicy hooks
hugetlbfs: drop shared NUMA mempolicy pretence
mm/damon/sysfs-test: add a unit test for damon_sysfs_set_targets()
...
API:
- Add virtual-address based lskcipher interface.
- Optimise ahash/shash performance in light of costly indirect calls.
- Remove ahash alignmask attribute.
Algorithms:
- Improve AES/XTS performance of 6-way unrolling for ppc.
- Remove some uses of obsolete algorithms (md4, md5, sha1).
- Add FIPS 202 SHA-3 support in pkcs1pad.
- Add fast path for single-page messages in adiantum.
- Remove zlib-deflate.
Drivers:
- Add support for S4 in meson RNG driver.
- Add STM32MP13x support in stm32.
- Add hwrng interface support in qcom-rng.
- Add support for deflate algorithm in hisilicon/zip.
-----BEGIN PGP SIGNATURE-----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=IZmR
-----END PGP SIGNATURE-----
Merge tag 'v6.7-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Add virtual-address based lskcipher interface
- Optimise ahash/shash performance in light of costly indirect calls
- Remove ahash alignmask attribute
Algorithms:
- Improve AES/XTS performance of 6-way unrolling for ppc
- Remove some uses of obsolete algorithms (md4, md5, sha1)
- Add FIPS 202 SHA-3 support in pkcs1pad
- Add fast path for single-page messages in adiantum
- Remove zlib-deflate
Drivers:
- Add support for S4 in meson RNG driver
- Add STM32MP13x support in stm32
- Add hwrng interface support in qcom-rng
- Add support for deflate algorithm in hisilicon/zip"
* tag 'v6.7-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (283 commits)
crypto: adiantum - flush destination page before unmapping
crypto: testmgr - move pkcs1pad(rsa,sha3-*) to correct place
Documentation/module-signing.txt: bring up to date
module: enable automatic module signing with FIPS 202 SHA-3
crypto: asymmetric_keys - allow FIPS 202 SHA-3 signatures
crypto: rsa-pkcs1pad - Add FIPS 202 SHA-3 support
crypto: FIPS 202 SHA-3 register in hash info for IMA
x509: Add OIDs for FIPS 202 SHA-3 hash and signatures
crypto: ahash - optimize performance when wrapping shash
crypto: ahash - check for shash type instead of not ahash type
crypto: hash - move "ahash wrapping shash" functions to ahash.c
crypto: talitos - stop using crypto_ahash::init
crypto: chelsio - stop using crypto_ahash::init
crypto: ahash - improve file comment
crypto: ahash - remove struct ahash_request_priv
crypto: ahash - remove crypto_ahash_alignmask
crypto: gcm - stop using alignmask of ahash
crypto: chacha20poly1305 - stop using alignmask of ahash
crypto: ccm - stop using alignmask of ahash
net: ipv6: stop checking crypto_ahash_alignmask
...
RPC client pipefs dentries cleanup is in separated rpc_remove_pipedir()
workqueue,which takes care about pipefs superblock locking.
In some special scenarios, when kernel frees the pipefs sb of the
current client and immediately alloctes a new pipefs sb,
rpc_remove_pipedir function would misjudge the existence of pipefs
sb which is not the one it used to hold. As a result,
the rpc_remove_pipedir would clean the released freed pipefs dentries.
To fix this issue, rpc_remove_pipedir should check whether the
current pipefs sb is consistent with the original pipefs sb.
This error can be catched by KASAN:
=========================================================
[ 250.497700] BUG: KASAN: slab-use-after-free in dget_parent+0x195/0x200
[ 250.498315] Read of size 4 at addr ffff88800a2ab804 by task kworker/0:18/106503
[ 250.500549] Workqueue: events rpc_free_client_work
[ 250.501001] Call Trace:
[ 250.502880] kasan_report+0xb6/0xf0
[ 250.503209] ? dget_parent+0x195/0x200
[ 250.503561] dget_parent+0x195/0x200
[ 250.503897] ? __pfx_rpc_clntdir_depopulate+0x10/0x10
[ 250.504384] rpc_rmdir_depopulate+0x1b/0x90
[ 250.504781] rpc_remove_client_dir+0xf5/0x150
[ 250.505195] rpc_free_client_work+0xe4/0x230
[ 250.505598] process_one_work+0x8ee/0x13b0
...
[ 22.039056] Allocated by task 244:
[ 22.039390] kasan_save_stack+0x22/0x50
[ 22.039758] kasan_set_track+0x25/0x30
[ 22.040109] __kasan_slab_alloc+0x59/0x70
[ 22.040487] kmem_cache_alloc_lru+0xf0/0x240
[ 22.040889] __d_alloc+0x31/0x8e0
[ 22.041207] d_alloc+0x44/0x1f0
[ 22.041514] __rpc_lookup_create_exclusive+0x11c/0x140
[ 22.041987] rpc_mkdir_populate.constprop.0+0x5f/0x110
[ 22.042459] rpc_create_client_dir+0x34/0x150
[ 22.042874] rpc_setup_pipedir_sb+0x102/0x1c0
[ 22.043284] rpc_client_register+0x136/0x4e0
[ 22.043689] rpc_new_client+0x911/0x1020
[ 22.044057] rpc_create_xprt+0xcb/0x370
[ 22.044417] rpc_create+0x36b/0x6c0
...
[ 22.049524] Freed by task 0:
[ 22.049803] kasan_save_stack+0x22/0x50
[ 22.050165] kasan_set_track+0x25/0x30
[ 22.050520] kasan_save_free_info+0x2b/0x50
[ 22.050921] __kasan_slab_free+0x10e/0x1a0
[ 22.051306] kmem_cache_free+0xa5/0x390
[ 22.051667] rcu_core+0x62c/0x1930
[ 22.051995] __do_softirq+0x165/0x52a
[ 22.052347]
[ 22.052503] Last potentially related work creation:
[ 22.052952] kasan_save_stack+0x22/0x50
[ 22.053313] __kasan_record_aux_stack+0x8e/0xa0
[ 22.053739] __call_rcu_common.constprop.0+0x6b/0x8b0
[ 22.054209] dentry_free+0xb2/0x140
[ 22.054540] __dentry_kill+0x3be/0x540
[ 22.054900] shrink_dentry_list+0x199/0x510
[ 22.055293] shrink_dcache_parent+0x190/0x240
[ 22.055703] do_one_tree+0x11/0x40
[ 22.056028] shrink_dcache_for_umount+0x61/0x140
[ 22.056461] generic_shutdown_super+0x70/0x590
[ 22.056879] kill_anon_super+0x3a/0x60
[ 22.057234] rpc_kill_sb+0x121/0x200
Fixes: 0157d021d2 ("SUNRPC: handle RPC client pipefs dentries by network namespace aware routines")
Signed-off-by: felix <fuzhen5@huawei.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
This IS_ERR() check was deleted during in a cleanup because, at the time,
the rpcb_call_async() function could not return an error pointer. That
changed in commit 25cf32ad5d ("SUNRPC: Handle allocation failure in
rpc_new_task()") and now it can return an error pointer. Put the check
back.
A related revert was done in commit 13bd901418 ("Revert "SUNRPC:
Remove unreachable error condition"").
Fixes: 037e910b52 ("SUNRPC: Remove unreachable error condition in rpcb_getport_async()")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
This release completes the SunRPC thread scheduler work that was
begun in v6.6. The scheduler can now find an svc thread to wake in
constant time and without a list walk. Thanks again to Neil Brown
for this overhaul.
Lorenzo Bianconi contributed infrastructure for a netlink-based
NFSD control plane. The long-term plan is to provide the same
functionality as found in /proc/fs/nfsd, plus some interesting
additions, and then migrate the NFSD user space utilities to
netlink.
A long series to overhaul NFSD's NFSv4 operation encoding was
applied in this release. The goals are to bring this family of
encoding functions in line with the matching NFSv4 decoding
functions and with the NFSv2 and NFSv3 XDR functions, preparing
the way for better memory safety and maintainability.
A further improvement to NFSD's write delegation support was
contributed by Dai Ngo. This adds a CB_GETATTR callback,
enabling the server to retrieve cached size and mtime data from
clients holding write delegations. If the server can retrieve
this information, it does not have to recall the delegation in
some cases.
The usual panoply of bug fixes and minor improvements round out
this release. As always I am grateful to all contributors,
reviewers, and testers.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEKLLlsBKG3yQ88j7+M2qzM29mf5cFAmU5IuoACgkQM2qzM29m
f5eVsg//bVp8S93ci/oDlKfzOwH2fO5e5rna91wrDpJxkd51h6KTx55dSRG5sjAZ
EywIVOann6xCtsixAPyff5Cweg2dWvzQRsy1ZnvWQ1qZBzD5KAJY5LPkeSFUCKBo
Zani/qTOYbxzgFMjZx+yDSXDPKG68WYZBQK59SI7mURu4SYdk8aRyNY8mjHfr0Vh
Aqrcny4oVtXV4sL5P5G/2FUW7WKT3olA3jSYlRRNMhbs2qpEemRCCrspOEMMad+b
t1+ZCg+U27PMranvOJnof4RU7peZbaxDWA0gyiUbivVXVtZn9uOs0ffhktkvechL
ePc33dqdp2ITdKIPA6JlaRv5WflKXQw0YYM9Kv5mcR4A2el7owL4f/pMlPhtbYwJ
IOJv15KdKVN979G2e6WMYiKK+iHfaUUguhMEXnfnGoAajHOZNQiUEo3iFQAD7LDc
DvMF8d9QqYmB9IW8FOYaRRfZGJOQHf3TL79Nd08z/bn5swvlvfj77leux9Sb+0/m
Luk2Xvz2AJVSXE31wzabaGHkizN+BtH+e4MMbXUHBPW5jE9v7XOnEUFr4UdZyr9P
Gl87A7NcrzNjJWT5TrnzM4sOslNsx46Aeg+VuNt2fSRn2dm6iBu2B8s0N4imx6dV
PX1y9VSLq5WRhjrFZ1qeiZdsuTaQtrEiNDoRIQR6nCJPAV80iFk=
=B4wJ
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd updates from Chuck Lever:
"This release completes the SunRPC thread scheduler work that was begun
in v6.6. The scheduler can now find an svc thread to wake in constant
time and without a list walk. Thanks again to Neil Brown for this
overhaul.
Lorenzo Bianconi contributed infrastructure for a netlink-based NFSD
control plane. The long-term plan is to provide the same functionality
as found in /proc/fs/nfsd, plus some interesting additions, and then
migrate the NFSD user space utilities to netlink.
A long series to overhaul NFSD's NFSv4 operation encoding was applied
in this release. The goals are to bring this family of encoding
functions in line with the matching NFSv4 decoding functions and with
the NFSv2 and NFSv3 XDR functions, preparing the way for better memory
safety and maintainability.
A further improvement to NFSD's write delegation support was
contributed by Dai Ngo. This adds a CB_GETATTR callback, enabling the
server to retrieve cached size and mtime data from clients holding
write delegations. If the server can retrieve this information, it
does not have to recall the delegation in some cases.
The usual panoply of bug fixes and minor improvements round out this
release. As always I am grateful to all contributors, reviewers, and
testers"
* tag 'nfsd-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (127 commits)
svcrdma: Fix tracepoint printk format
svcrdma: Drop connection after an RDMA Read error
NFSD: clean up alloc_init_deleg()
NFSD: Fix frame size warning in svc_export_parse()
NFSD: Rewrite synopsis of nfsd_percpu_counters_init()
nfsd: Clean up errors in nfs3proc.c
nfsd: Clean up errors in nfs4state.c
NFSD: Clean up errors in stats.c
NFSD: simplify error paths in nfsd_svc()
NFSD: Clean up nfsd4_encode_seek()
NFSD: Clean up nfsd4_encode_offset_status()
NFSD: Clean up nfsd4_encode_copy_notify()
NFSD: Clean up nfsd4_encode_copy()
NFSD: Clean up nfsd4_encode_test_stateid()
NFSD: Clean up nfsd4_encode_exchange_id()
NFSD: Clean up nfsd4_do_encode_secinfo()
NFSD: Clean up nfsd4_encode_access()
NFSD: Clean up nfsd4_encode_readdir()
NFSD: Clean up nfsd4_encode_entry4()
NFSD: Add an nfsd4_encode_nfs_cookie4() helper
...
SOFTCONN tasks need to periodically check if the transport is still
connected, so that they can time out if that is not the case.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Fix up xs_wake_error() to close the socket when a hard error is being
reported. Usually, that means an ECONNRESET was received on a connection
attempt.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If connect() is returning ECONNRESET, it usually means that nothing is
listening on that port. If so, a rebind might be required in order to
obtain the new port on which the RPC service is listening.
Fixes: fd01b25979 ("SUNRPC: ECONNREFUSED should cause a rebind.")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
When an RPC Call message cannot be pulled from the client, that
is a message loss, by definition. Close the connection to trigger
the client to resend.
Cc: <stable@vger.kernel.org>
Reviewed-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
There is no need to take down the whole system for these assertions.
I'd rather not attempt a heroic save here, as some bug has occurred
that has left the transport data structures in an unknown state.
Just warn and then leak the left-over resources.
Acked-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
This removes the need to store and update back-links in the list.
It also remove the need for the _bh version of spin_lock().
Signed-off-by: NeilBrown <neilb@suse.de>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
sp_lock is now only used to protect sp_all_threads. This isn't needed
as sp_all_threads is only manipulated through svc_set_num_threads(),
which is already serialized. Read-acccess only requires rcu_read_lock().
So no more locking is needed.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Using an atomic_t avoids the need to take a spinlock (which can soon be
removed).
Choosing a thread to kill needs to be careful as we cannot set the "die
now" bit atomically with the test on the count. Instead we temporarily
increase the count.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
lwq avoids using back pointers in lists, and uses less locking.
This introduces a new spinlock, but the other one will be removed in a
future patch.
For svc_clean_up_xprts(), we now dequeue the entire queue, walk it to
remove and process the xprts that need cleaning up, then re-enqueue the
remaining queue.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Currently if several items of work become available in quick succession,
that number of threads (if available) will be woken. By the time some
of them wake up another thread that was already cache-warm might have
come along and completed the work. Anecdotal evidence suggests as many
as 15% of wakes find nothing to do once they get to the point of
looking.
This patch changes svc_pool_wake_idle_thread() to wake the first thread
on the queue but NOT remove it. Subsequent calls will wake the same
thread. Once that thread starts it will dequeue itself and after
dequeueing some work to do, it will wake the next thread if there is more
work ready. This results in a more orderly increase in the number of
busy threads.
As a bonus, this allows us to reduce locking around the idle queue.
svc_pool_wake_idle_thread() no longer needs to take a lock (beyond
rcu_read_lock()) as it doesn't manipulate the queue, it just looks at
the first item.
The thread itself can avoid locking by using the new
llist_del_first_this() interface. This will safely remove the thread
itself if it is the head. If it isn't the head, it will do nothing.
If multiple threads call this concurrently only one will succeed. The
others will do nothing, so no corruption can result.
If a thread wakes up and finds that it cannot dequeue itself that means
either
- that it wasn't woken because it was the head of the queue. Maybe the
freezer woke it. In that case it can go back to sleep (after trying
to freeze of course).
- some other thread found there was nothing to do very recently, and
placed itself on the head of the queue in front of this thread.
It must check again after placing itself there, so it can be deemed to
be responsible for any pending work, and this thread can go back to
sleep until woken.
No code ever tests for busy threads any more. Only each thread itself
cares if it is busy. So svc_thread_busy() is no longer needed.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Functions which directly manipulate a 'struct rqst', such as
svc_rqst_alloc() or svc_rqst_release_pages(), can reasonably
have "rqst" in there name.
However functions that act on the running thread, such as
XX_should_sleep() or XX_wait_for_work() should seem more
natural with a "svc_thread_" prefix.
So make those changes.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
With an llist we don't need to take a lock to add a thread to the list,
though we still need a lock to remove it. That will go in the next
patch.
Unlike double-linked lists, a thread cannot reliably remove itself from
the list. Only the first thread can be removed, and that can change
asynchronously. So some care is needed.
We already check if there is pending work to do, so we are unlikely to
add ourselves to the idle list and then want to remove ourselves again.
If we DO find something needs to be done after adding ourselves to the
list, we simply wake up the first thread on the list. If that was us,
we successfully removed ourselves and can continue. If it was some
other thread, they will do the work that needs to be done. We can
safely sleep until woken.
We also remove the test on freezing() from rqst_should_sleep(). Instead
we set TASK_FREEZABLE before scheduling. This makes is safe to
schedule() when a freeze is pending. As we now loop waiting to be
removed from the idle queue, this is a cleaner way to handle freezing.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
We can tell if a pool is congested by checking if the idle list is
empty. We don't need a separate flag.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Rather than searching a list of threads to find an idle one, having a
list of idle threads allows an idle thread to be found immediately.
This adds some spin_lock calls which is not ideal, but as the hold-time
is tiny it is still faster than searching a list. A future patch will
remove them using llist.h. This involves some subtlety and so is left
to a separate patch.
This removes the need for the RQ_BUSY flag. The rqst is "busy"
precisely when it is not on the "idle" list.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
svc threads are currently stopped using kthread_stop(). This requires
identifying a specific thread. However we don't care which thread
stops, just as long as one does.
So instead, set a flag in the svc_pool to say that a thread needs to
die, and have each thread check this flag instead of calling
kthread_should_stop(). The first thread to find and clear this flag
then moves towards exiting.
This removes an explicit dependency on sp_all_threads which will make a
future patch simpler.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Using svc_recv() for (NFSv4.1) back-channel handling means we have just
one mechanism for waking threads.
Also change kthread_freezable_should_stop() in nfs4_callback_svc() to
kthread_should_stop() as used elsewhere.
kthread_freezable_should_stop() effectively adds a try_to_freeze() call,
and svc_recv() already contains that at an appropriate place.
Signed-off-by: NeilBrown <neilb@suse.de>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The test robot complained that, in some build configurations, the
@error variable in bc_svc_process's only caller is set but never
used. This happens because dprintk() is the only consumer of that
value.
- Remove the dprintk() call sites in favor of the svc_process
tracepoint
- The @error variable and the return value of bc_svc_process() are
now unused, so get rid of them.
- The @serv parameter is set to rqstp->rq_serv by the only caller,
and bc_svc_process() then uses it only to set rqstp->rq_serv. It
can be removed.
- Rename bc_svc_process() according to the convention that
globally-visible RPC server functions have names that begin with
"svc_"; and because it is globally-visible, give it a proper
kdoc comment.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308121314.HA8Rq2XG-lkp@intel.com/
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
svc_get_next_xprt() does a lot more than just get an xprt. It also
decides if it needs to sleep, depending not only on the availability of
xprts but also on the need to exit or handle external work.
So rename it to svc_rqst_wait_for_work() and only do the testing and
waiting. Move all the waiting-related code out of svc_recv() into the
new svc_rqst_wait_for_work().
Move the dequeueing code out of svc_get_next_xprt() into svc_recv().
Previously svc_xprt_dequeue() would be called twice, once before waiting
and possibly once after. Now instead rqst_should_sleep() is called
twice. Once to decide if waiting is needed, and once to check against
after setting the task state do see if we might have missed a wakeup.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
svc_xprt_handle() does lots of things itself, but leaves some to the
caller - svc_recv(). This isn't elegant.
Move that code out of svc_recv() into svc_xprt_handle()
Move the calls to svc_xprt_release() from svc_send() and svc_drop()
(the two possible final steps in svc_process()) and from svc_recv() (in
the case where svc_process() wasn't called) into svc_xprt_handle().
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
This reverts commit 88428cc4ae.
The problem this commit is intended to fix was comprehensively fixed
in commit 7de62bc09f ("SUNRPC dont update timeout value on connection
reset").
Since then, this commit has been preventing the correct timeout of soft
mounted requests.
Cc: stable@vger.kernel.org # 5.9.x: 09252177d5: SUNRPC: Handle major timeout in xprt_adjust_timeout()
Cc: stable@vger.kernel.org # 5.9.x: 7de62bc09f: SUNRPC dont update timeout value on connection reset
Cc: stable@vger.kernel.org # 5.9.x
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
rpcauth_checkverf() should return a distinct error code when a
server recognizes the AUTH_TLS probe but does not support TLS so
that the client's header decoder can respond appropriately and
quickly. No retries are necessary is in this case, since the server
has already affirmatively answered "TLS is unsupported".
Suggested-by: Trond Myklebust <trondmy@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The header file crypto/algapi.h is for internal use only. Use the
header file crypto/utils.h instead.
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently, when GETDEVICEINFO returns multiple locations where each
is a different IP but the server's identity is same as MDS, then
nfs4_set_ds_client() finds the existing nfs_client structure which
has the MDS's max_connect value (and if it's 1), then the 1st IP
on the DS's list will get dropped due to MDS trunking rules. Other
IPs would be added as they fall under the pnfs trunking rules.
For the list of IPs the 1st goes thru calling nfs4_set_ds_client()
which will eventually call nfs4_add_trunk() and call into
rpc_clnt_test_and_add_xprt() which has the check for MDS trunking.
The other IPs (after the 1st one), would call rpc_clnt_add_xprt()
which doesn't go thru that check.
nfs4_add_trunk() is called when MDS trunking is happening and it
needs to enforce the usage of max_connect mount option of the
1st mount. However, this shouldn't be applied to pnfs flow.
Instead, this patch proposed to treat MDS=DS as DS trunking and
make sure that MDS's max_connect limit does not apply to the
1st IP returned in the GETDEVICEINFO list. It does so by
marking the newly created client with a new flag NFS_CS_PNFS
which then used to pass max_connect value to use into the
rpc_clnt_test_and_add_xprt() instead of the existing rpc
client's max_connect value set by the MDS connection.
For example, mount was done without max_connect value set
so MDS's rpc client has cl_max_connect=1. Upon calling into
rpc_clnt_test_and_add_xprt() and using rpc client's value,
the caller passes in max_connect value which is previously
been set in the pnfs path (as a part of handling
GETDEVICEINFO list of IPs) in nfs4_set_ds_client().
However, when NFS_CS_PNFS flag is not set and we know we
are doing MDS trunking, comparing a new IP of the same
server, we then set the max_connect value to the
existing MDS's value and pass that into
rpc_clnt_test_and_add_xprt().
Fixes: dc48e0abee ("SUNRPC enforce creation of no more than max_connect xprts")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
This reverts commit 0701214cd6.
The premise of this commit was incorrect. There are exactly 2 cases
where rpcauth_checkverf() will return an error:
1) If there was an XDR decode problem (i.e. garbage data).
2) If gss_validate() had a problem verifying the RPCSEC_GSS MIC.
In the second case, there are again 2 subcases:
a) The GSS context expires, in which case gss_validate() will force a
new context negotiation on retry by invalidating the cred.
b) The sequence number check failed because an RPC call timed out, and
the client retransmitted the request using a new sequence number,
as required by RFC2203.
In neither subcase is this a fatal error.
Reported-by: Russell Cattelan <cattelan@thebarn.com>
Fixes: 0701214cd6 ("SUNRPC: Fail faster on bad verifier")
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If the server rejects the credential as being stale, or bad, then we
should mark it for revalidation before retransmitting.
Fixes: 7f5667a5f8 ("SUNRPC: Clean up rpc_verify_header()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
New Features:
* Enable the NFS v4.2 READ_PLUS operation by default
Stable Fixes:
* NFSv4/pnfs: minor fix for cleanup path in nfs4_get_device_info
* NFS: Fix a potential data corruption
Bugfixes:
* Fix various READ_PLUS issues including:
* smatch warnings
* xdr size calculations
* scratch buffer handling
* 32bit / highmem xdr page handling
* Fix checkpatch errors in file.c
* Fix redundant readdir request after an EOF
* Fix handling of COPY ERR_OFFLOAD_NO_REQ
* Fix assignment of xprtdata.cred
Cleanups:
* Remove unused xprtrdma function declarations
* Clean up an integer overflow check to avoid a warning
* Clean up #includes in dns_resolve.c
* Clean up nfs4_get_device_info so we don't pass a NULL pointer to __free_page()
* Clean up sunrpc TCP socket timeout configuration
* Guard against READDIR loops when entry names are too long
* Use EXCHID4_FLAG_USE_PNFS_DS for DS servers
-----BEGIN PGP SIGNATURE-----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=rjmq
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-6.6-1' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client updates from Anna Schumaker:
"New Features:
- Enable the NFS v4.2 READ_PLUS operation by default
Stable Fixes:
- NFSv4/pnfs: minor fix for cleanup path in nfs4_get_device_info
- NFS: Fix a potential data corruption
Bugfixes:
- Fix various READ_PLUS issues including:
- smatch warnings
- xdr size calculations
- scratch buffer handling
- 32bit / highmem xdr page handling
- Fix checkpatch errors in file.c
- Fix redundant readdir request after an EOF
- Fix handling of COPY ERR_OFFLOAD_NO_REQ
- Fix assignment of xprtdata.cred
Cleanups:
- Remove unused xprtrdma function declarations
- Clean up an integer overflow check to avoid a warning
- Clean up #includes in dns_resolve.c
- Clean up nfs4_get_device_info so we don't pass a NULL pointer
to __free_page()
- Clean up sunrpc TCP socket timeout configuration
- Guard against READDIR loops when entry names are too long
- Use EXCHID4_FLAG_USE_PNFS_DS for DS servers"
* tag 'nfs-for-6.6-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (22 commits)
pNFS: Fix assignment of xprtdata.cred
NFSv4.2: fix handling of COPY ERR_OFFLOAD_NO_REQ
NFS: Guard against READDIR loop when entry names exceed MAXNAMELEN
NFSv4.1: use EXCHGID4_FLAG_USE_PNFS_DS for DS server
NFS/pNFS: Set the connect timeout for the pNFS flexfiles driver
SUNRPC: Don't override connect timeouts in rpc_clnt_add_xprt()
SUNRPC: Allow specification of TCP client connect timeout at setup
SUNRPC: Refactor and simplify connect timeout
SUNRPC: Set the TCP_SYNCNT to match the socket timeout
NFS: Fix a potential data corruption
nfs: fix redundant readdir request after get eof
nfs/blocklayout: Use the passed in gfp flags
filemap: Fix errors in file.c
NFSv4/pnfs: minor fix for cleanup path in nfs4_get_device_info
NFS: Move common includes outside ifdef
SUNRPC: clean up integer overflow check
xprtrdma: Remove unused function declaration rpcrdma_bc_post_recv()
NFS: Enable the READ_PLUS operation by default
SUNRPC: kmap() the xdr pages during decode
NFSv4.2: Rework scratch handling for READ_PLUS (again)
...
I'm thrilled to announce that the Linux in-kernel NFS server now
offers NFSv4 write delegations. A write delegation enables a client
to cache data and metadata for a single file more aggressively,
reducing network round trips and server workload. Many thanks to Dai
Ngo for contributing this facility, and to Jeff Layton and Neil
Brown for reviewing and testing it.
This release also sees the removal of all support for DES- and
triple-DES-based Kerberos encryption types in the kernel's SunRPC
implementation. These encryption types have been deprecated by the
Internet community for years and are considered insecure. This
change affects both the in-kernel NFS client and server.
The server's UDP and TCP socket transports have now fully adopted
David Howells' new bio_vec iterator so that no more than one
sendmsg() call is needed to transmit each RPC message. In
particular, this helps kTLS optimize record boundaries when sending
RPC-with-TLS replies, and it takes the server a baby step closer to
handling file I/O via folios.
We've begun work on overhauling the SunRPC thread scheduler to
remove a costly linked-list walk when looking for an idle RPC
service thread to wake. The pre-requisites are included in this
release. Thanks to Neil Brown for his ongoing work on this
improvement.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEKLLlsBKG3yQ88j7+M2qzM29mf5cFAmTwoa0ACgkQM2qzM29m
f5cZvw/8CmFVNC27aMrJEhRRhwwrXbLzUkWh9GCYkG98PHYiLxLTvZ6qELXAax/a
UjSgIDSRcWl4z8M/tyBQtgsw7NADr+7XWqEoXR7HZ5pEEC/KNGM0oQWQ92ojjKYy
JmHdB02uaDJfcd9ioFTU13cw7q2BQfoe2xLI8yqis2vcVSu92AM7aIw+cvJIpwQB
inA3TIIsYTV/gPByXSfEtvmYACadoFiMvfvYwaWhjFS9MdSzFmcVG0Dp3EFIig29
odmWEofcz6uIvUWvUswWEGdoSu7uOKIztSuAI4PlTwaofUaSKG6e5kmtpr3cLERD
Uhg2lm5JgqkXBd7QHObNimJ4DtQzFwHmhA08qo8rd/zba75mn/Hr5IF0q3Rxs99J
SRYHcAeP8afKn5Ge0yzoTgCNcqhfz8KLRfoCQX49mljr+muNxld4nMklD2KdUwJi
XEB512/q3E4nUgopXZiSJYQYAq1CfdR5WpGipZ9X0XK9HZBDF/qhXGtk1YQuNWyj
ZxJS3bfBza4oVIvP5/ehjCIQwOvqkcrC5zZGDIgDvw9Q6L3L1wqmVntsdCLCLRcJ
jB4IOsj+DECfJ6w2vP2SZ3GeMtFnyuTQjhUTkjPuAKTBBiKo4Tj0o/agpfDYbWZy
1l3a2yH5jqJgkm4MaVh3YHRJGc0ub0ccpIrs3QQ4jvjMLQ/3Gcs=
=XGHs
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd updates from Chuck Lever:
"I'm thrilled to announce that the Linux in-kernel NFS server now
offers NFSv4 write delegations. A write delegation enables a client to
cache data and metadata for a single file more aggressively, reducing
network round trips and server workload. Many thanks to Dai Ngo for
contributing this facility, and to Jeff Layton and Neil Brown for
reviewing and testing it.
This release also sees the removal of all support for DES- and
triple-DES-based Kerberos encryption types in the kernel's SunRPC
implementation. These encryption types have been deprecated by the
Internet community for years and are considered insecure. This change
affects both the in-kernel NFS client and server.
The server's UDP and TCP socket transports have now fully adopted
David Howells' new bio_vec iterator so that no more than one sendmsg()
call is needed to transmit each RPC message. In particular, this helps
kTLS optimize record boundaries when sending RPC-with-TLS replies, and
it takes the server a baby step closer to handling file I/O via
folios.
We've begun work on overhauling the SunRPC thread scheduler to remove
a costly linked-list walk when looking for an idle RPC service thread
to wake. The pre-requisites are included in this release. Thanks to
Neil Brown for his ongoing work on this improvement"
* tag 'nfsd-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (56 commits)
Documentation: Add missing documentation for EXPORT_OP flags
SUNRPC: Remove unused declaration rpc_modcount()
SUNRPC: Remove unused declarations
NFSD: da_addr_body field missing in some GETDEVICEINFO replies
SUNRPC: Remove return value of svc_pool_wake_idle_thread()
SUNRPC: make rqst_should_sleep() idempotent()
SUNRPC: Clean up svc_set_num_threads
SUNRPC: Count ingress RPC messages per svc_pool
SUNRPC: Deduplicate thread wake-up code
SUNRPC: Move trace_svc_xprt_enqueue
SUNRPC: Add enum svc_auth_status
SUNRPC: change svc_xprt::xpt_flags bits to enum
SUNRPC: change svc_rqst::rq_flags bits to enum
SUNRPC: change svc_pool::sp_flags bits to enum
SUNRPC: change cache_head.flags bits to enum
SUNRPC: remove timeout arg from svc_recv()
SUNRPC: change svc_recv() to return void.
SUNRPC: call svc_process() from svc_recv().
nfsd: separate nfsd_last_thread() from nfsd_put()
nfsd: Simplify code around svc_exit_thread() call in nfsd()
...
The returned value is not used (any more), so don't return it.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Based on its name you would think that rqst_should_sleep() would be
read-only, not changing anything. But in fact it will clear
SP_TASK_PENDING if that was set. This is surprising, and it blurs the
line between "check for work to do" and "dequeue work to do".
So change the "test_and_clear" to simple "test" and clear the bit once
the thread has decided to wake up and return to the caller.
With this, it makes sense to *always* set SP_TASK_PENDING when asked,
rather than to set it only if no thread could be woken up.
[ cel: Previously TASK_PENDING indicated there is work waiting but no
idle threads were found to pick up that work. After this patch, it acts
as an XPT_BUSY flag for wake-ups that have no associated xprt. ]
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Document the API contract and remove stale or obvious comments.
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
svc_xprt_enqueue() can be costly, since it involves selecting and
waking up a process.
More than one enqueue is done per incoming RPC. For example,
svc_data_ready() enqueues, and so does svc_xprt_receive(). Also, if
an RPC message requires more than one call to ->recvfrom() to
receive it fully, each one of those calls does an enqueue.
To get a sense of the average number of transport enqueue operations
needed to process an incoming RPC message, re-use the "packets" pool
stat. Track the number of complete RPC messages processed by each
thread pool.
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Refactor: Extract the loop that finds an idle service thread from
svc_xprt_enqueue() and svc_wake_up(). Both functions do just about
the same thing.
Note that svc_wake_up() currently does not hold the RCU read lock
while waking the target thread. It indeed should hold the lock, just
as svc_xprt_enqueue() does, to ensure the rqstp does not vanish
during the wake-up. This patch adds the RCU lock for svc_wake_up().
Note that shrinking the pool thread count is rare, and calls to
svc_wake_up() are also quite infrequent. In practice, this race is
very unlikely to be hit, so we are not marking the lock fix for
stable backport at this time.
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The xpt_flags field frequently changes between the time that
svc_xprt_ready() grabs a copy and execution flow arrives at the
tracepoint at the tail of svc_xprt_enqueue(). In fact, there's
usually a sleep/wake-up in there, so those flags are almost
guaranteed to be different.
It would be more useful to record the exact flags that were used to
decide whether the transport is ready, so move the tracepoint.
Moving it means the tracepoint can't pick up the waker's pid. That
can be added to struct svc_rqst if it turns out that is important.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
In addition to the benefits of using an enum rather than a set of
macros, we now have a named type that can improve static type
checking of function return values.
As part of this change, I removed a stale comment from svcauth.h;
the return values from current implementations of the
auth_ops::release method are all zero/negative errno, not the SVC_OK
enum values as the old comment suggested.
Suggested-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Most svc threads have no interest in a timeout.
nfsd sets it to 1 hour, but this is a wart of no significance.
lockd uses the timeout so that it can call nlmsvc_retry_blocked().
It also sometimes calls svc_wake_up() to ensure this is called.
So change lockd to be consistent and always use svc_wake_up() to trigger
nlmsvc_retry_blocked() - using a timer instead of a timeout to
svc_recv().
And change svc_recv() to not take a timeout arg.
This makes the sp_threads_timedout counter always zero.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
svc_recv() currently returns a 0 on success or one of two errors:
- -EAGAIN means no message was successfully received
- -EINTR means the thread has been told to stop
Previously nfsd would stop as the result of a signal as well as
following kthread_stop(). In that case the difference was useful: EINTR
means stop unconditionally. EAGAIN means stop if kthread_should_stop(),
continue otherwise.
Now threads only exit when kthread_should_stop() so we don't need the
distinction.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
All callers of svc_recv() go on to call svc_process() on success.
Simplify callers by having svc_recv() do that for them.
This loses one call to validate_process_creds() in nfsd. That was
debugging code added 14 years ago. I don't think we need to keep it.
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The original implementation of nfsd used signals to stop threads during
shutdown.
In Linux 2.3.46pre5 nfsd gained the ability to shutdown threads
internally it if was asked to run "0" threads. After this user-space
transitioned to using "rpc.nfsd 0" to stop nfsd and sending signals to
threads was no longer an important part of the API.
In commit 3ebdbe5203 ("SUNRPC: discard svo_setup and rename
svc_set_num_threads_sync()") (v5.17-rc1~75^2~41) we finally removed the
use of signals for stopping threads, using kthread_stop() instead.
This patch makes the "obvious" next step and removes the ability to
signal nfsd threads - or any svc threads. nfsd stops allowing signals
and we don't check for their delivery any more.
This will allow for some simplification in later patches.
A change worth noting is in nfsd4_ssc_setup_dul(). There was previously
a signal_pending() check which would only succeed when the thread was
being shut down. It should really have tested kthread_should_stop() as
well. Now it just does the latter, not the former.
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
With large NFS WRITE requests on TCP, I measured 5-10 thread wake-
ups to receive each request. This is because the socket layer
calls ->sk_data_ready() frequently, and each call triggers a
thread wake-up. Each recvmsg() seems to pull in less than 100KB.
Have the socket layer hold ->sk_data_ready() calls until the full
incoming message has arrived to reduce the wake-up rate.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Flamegraph analysis showed that the cork/uncork calls consume
nearly a third of the CPU time spent in svc_tcp_sendto(). The
other two consumers are mutex lock/unlock and svc_tcp_sendmsg().
Now that svc_tcp_sendto() coalesces RPC messages properly, there
is no need to introduce artificial delays to prevent sending
partial messages.
After applying this change, I measured a 1.2K read IOPS increase
for 8KB random I/O (several percent) on 56Gb IP over IB.
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Commit da1661b93b ("SUNRPC: Teach server to use xprt_sock_sendmsg
for socket sends") modified svc_udp_sendto() to use xprt_sock_sendmsg()
because we originally believed xprt_sock_sendmsg() would be needed
for TLS support. That does not actually appear to be the case.
In addition, the linkage between the client and server send code has
been a bit of a maintenance headache because of the distinct ways
that the client and server handle memory allocation.
Going forward, eventually the XDR layer will deal with its buffers
in the form of bio_vec arrays, so convert this function accordingly.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
There is now enough infrastructure in place to combine the stream
record marker into the biovec array used to send each outgoing RPC
message on TCP. The whole message can be more efficiently sent with
a single call to sock_sendmsg() using a bio_vec iterator.
Note that this also helps with RPC-with-TLS: the TLS implementation
can now clearly see where the upper layer message boundaries are.
Before, it would send each component of the xdr_buf (record marker,
head, page payload, tail) in separate TLS records.
Suggested-by: David Howells <dhowells@redhat.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Add a helper to convert a whole xdr_buf directly into an array of
bio_vecs, then send this array instead of iterating piecemeal over
the xdr_buf containing the outbound RPC message.
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
All supported encryption types now use the same context import
function.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
This code is now always on, so the ifdef can be removed.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Make it impossible to enable support for the DES or DES3 Kerberos
encryption types in SunRPC. These enctypes were deprecated by RFCs
6649 and 8429 because they are known to be insecure.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Jeff confirmed his original fix addressed his pynfs test failure,
but this same bug also impacted qemu: accessing qcow2 virtual disks
using direct I/O was failing. Jeff's fix missed that you have to
shorten the bio_vec element by the same amount as you increased
the page offset.
Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Fixes: c96e2a695e ("sunrpc: set the bv_offset of first bvec in svc_tcp_sendmsg")
Tested-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Core
----
- Increase size limits for to-be-sent skb frag allocations. This
allows tun, tap devices and packet sockets to better cope with large
writes operations.
- Store netdevs in an xarray, to simplify iterating over netdevs.
- Refactor nexthop selection for multipath routes.
- Improve sched class lifetime handling.
- Add backup nexthop ID support for bridge.
- Implement drop reasons support in openvswitch.
- Several data races annotations and fixes.
- Constify the sk parameter of routing functions.
- Prepend kernel version to netconsole message.
Protocols
---------
- Implement support for TCP probing the peer being under memory
pressure.
- Remove hard coded limitation on IPv6 specific info placement
inside the socket struct.
- Get rid of sysctl_tcp_adv_win_scale and use an auto-estimated
per socket scaling factor.
- Scaling-up the IPv6 expired route GC via a separated list of
expiring routes.
- In-kernel support for the TLS alert protocol.
- Better support for UDP reuseport with connected sockets.
- Add NEXT-C-SID support for SRv6 End.X behavior, reducing the SR
header size.
- Get rid of additional ancillary per MPTCP connection struct socket.
- Implement support for BPF-based MPTCP packet schedulers.
- Format MPTCP subtests selftests results in TAP.
- Several new SMC 2.1 features including unique experimental options,
max connections per lgr negotiation, max links per lgr negotiation.
BPF
---
- Multi-buffer support in AF_XDP.
- Add multi uprobe BPF links for attaching multiple uprobes
and usdt probes, which is significantly faster and saves extra fds.
- Implement an fd-based tc BPF attach API (TCX) and BPF link support on
top of it.
- Add SO_REUSEPORT support for TC bpf_sk_assign.
- Support new instructions from cpu v4 to simplify the generated code and
feature completeness, for x86, arm64, riscv64.
- Support defragmenting IPv(4|6) packets in BPF.
- Teach verifier actual bounds of bpf_get_smp_processor_id()
and fix perf+libbpf issue related to custom section handling.
- Introduce bpf map element count and enable it for all program types.
- Add a BPF hook in sys_socket() to change the protocol ID
from IPPROTO_TCP to IPPROTO_MPTCP to cover migration for legacy.
- Introduce bpf_me_mcache_free_rcu() and fix OOM under stress.
- Add uprobe support for the bpf_get_func_ip helper.
- Check skb ownership against full socket.
- Support for up to 12 arguments in BPF trampoline.
- Extend link_info for kprobe_multi and perf_event links.
Netfilter
---------
- Speed-up process exit by aborting ruleset validation if a
fatal signal is pending.
- Allow NLA_POLICY_MASK to be used with BE16/BE32 types.
Driver API
----------
- Page pool optimizations, to improve data locality and cache usage.
- Introduce ndo_hwtstamp_get() and ndo_hwtstamp_set() to avoid the need
for raw ioctl() handling in drivers.
- Simplify genetlink dump operations (doit/dumpit) providing them
the common information already populated in struct genl_info.
- Extend and use the yaml devlink specs to [re]generate the split ops.
- Introduce devlink selective dumps, to allow SF filtering SF based on
handle and other attributes.
- Add yaml netlink spec for netlink-raw families, allow route, link and
address related queries via the ynl tool.
- Remove phylink legacy mode support.
- Support offload LED blinking to phy.
- Add devlink port function attributes for IPsec.
New hardware / drivers
----------------------
- Ethernet:
- Broadcom ASP 2.0 (72165) ethernet controller
- MediaTek MT7988 SoC
- Texas Instruments AM654 SoC
- Texas Instruments IEP driver
- Atheros qca8081 phy
- Marvell 88Q2110 phy
- NXP TJA1120 phy
- WiFi:
- MediaTek mt7981 support
- Can:
- Kvaser SmartFusion2 PCI Express devices
- Allwinner T113 controllers
- Texas Instruments tcan4552/4553 chips
- Bluetooth:
- Intel Gale Peak
- Qualcomm WCN3988 and WCN7850
- NXP AW693 and IW624
- Mediatek MT2925
Drivers
-------
- Ethernet NICs:
- nVidia/Mellanox:
- mlx5:
- support UDP encapsulation in packet offload mode
- IPsec packet offload support in eswitch mode
- improve aRFS observability by adding new set of counters
- extends MACsec offload support to cover RoCE traffic
- dynamic completion EQs
- mlx4:
- convert to use auxiliary bus instead of custom interface logic
- Intel
- ice:
- implement switchdev bridge offload, even for LAG interfaces
- implement SRIOV support for LAG interfaces
- igc:
- add support for multiple in-flight TX timestamps
- Broadcom:
- bnxt:
- use the unified RX page pool buffers for XDP and non-XDP
- use the NAPI skb allocation cache
- OcteonTX2:
- support Round Robin scheduling HTB offload
- TC flower offload support for SPI field
- Freescale:
- add XDP_TX feature support
- AMD:
- ionic: add support for PCI FLR event
- sfc:
- basic conntrack offload
- introduce eth, ipv4 and ipv6 pedit offloads
- ST Microelectronics:
- stmmac: maximze PTP timestamping resolution
- Virtual NICs:
- Microsoft vNIC:
- batch ringing RX queue doorbell on receiving packets
- add page pool for RX buffers
- Virtio vNIC:
- add per queue interrupt coalescing support
- Google vNIC:
- add queue-page-list mode support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add port range matching tc-flower offload
- permit enslavement to netdevices with uppers
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- convert to phylink_pcs
- Renesas:
- r8A779fx: add speed change support
- rzn1: enables vlan support
- Ethernet PHYs:
- convert mv88e6xxx to phylink_pcs
- WiFi:
- Qualcomm Wi-Fi 7 (ath12k):
- extremely High Throughput (EHT) PHY support
- RealTek (rtl8xxxu):
- enable AP mode for: RTL8192FU, RTL8710BU (RTL8188GU),
RTL8192EU and RTL8723BU
- RealTek (rtw89):
- Introduce Time Averaged SAR (TAS) support
- Connector:
- support for event filtering
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=9CsR
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Increase size limits for to-be-sent skb frag allocations. This
allows tun, tap devices and packet sockets to better cope with
large writes operations
- Store netdevs in an xarray, to simplify iterating over netdevs
- Refactor nexthop selection for multipath routes
- Improve sched class lifetime handling
- Add backup nexthop ID support for bridge
- Implement drop reasons support in openvswitch
- Several data races annotations and fixes
- Constify the sk parameter of routing functions
- Prepend kernel version to netconsole message
Protocols:
- Implement support for TCP probing the peer being under memory
pressure
- Remove hard coded limitation on IPv6 specific info placement inside
the socket struct
- Get rid of sysctl_tcp_adv_win_scale and use an auto-estimated per
socket scaling factor
- Scaling-up the IPv6 expired route GC via a separated list of
expiring routes
- In-kernel support for the TLS alert protocol
- Better support for UDP reuseport with connected sockets
- Add NEXT-C-SID support for SRv6 End.X behavior, reducing the SR
header size
- Get rid of additional ancillary per MPTCP connection struct socket
- Implement support for BPF-based MPTCP packet schedulers
- Format MPTCP subtests selftests results in TAP
- Several new SMC 2.1 features including unique experimental options,
max connections per lgr negotiation, max links per lgr negotiation
BPF:
- Multi-buffer support in AF_XDP
- Add multi uprobe BPF links for attaching multiple uprobes and usdt
probes, which is significantly faster and saves extra fds
- Implement an fd-based tc BPF attach API (TCX) and BPF link support
on top of it
- Add SO_REUSEPORT support for TC bpf_sk_assign
- Support new instructions from cpu v4 to simplify the generated code
and feature completeness, for x86, arm64, riscv64
- Support defragmenting IPv(4|6) packets in BPF
- Teach verifier actual bounds of bpf_get_smp_processor_id() and fix
perf+libbpf issue related to custom section handling
- Introduce bpf map element count and enable it for all program types
- Add a BPF hook in sys_socket() to change the protocol ID from
IPPROTO_TCP to IPPROTO_MPTCP to cover migration for legacy
- Introduce bpf_me_mcache_free_rcu() and fix OOM under stress
- Add uprobe support for the bpf_get_func_ip helper
- Check skb ownership against full socket
- Support for up to 12 arguments in BPF trampoline
- Extend link_info for kprobe_multi and perf_event links
Netfilter:
- Speed-up process exit by aborting ruleset validation if a fatal
signal is pending
- Allow NLA_POLICY_MASK to be used with BE16/BE32 types
Driver API:
- Page pool optimizations, to improve data locality and cache usage
- Introduce ndo_hwtstamp_get() and ndo_hwtstamp_set() to avoid the
need for raw ioctl() handling in drivers
- Simplify genetlink dump operations (doit/dumpit) providing them the
common information already populated in struct genl_info
- Extend and use the yaml devlink specs to [re]generate the split ops
- Introduce devlink selective dumps, to allow SF filtering SF based
on handle and other attributes
- Add yaml netlink spec for netlink-raw families, allow route, link
and address related queries via the ynl tool
- Remove phylink legacy mode support
- Support offload LED blinking to phy
- Add devlink port function attributes for IPsec
New hardware / drivers:
- Ethernet:
- Broadcom ASP 2.0 (72165) ethernet controller
- MediaTek MT7988 SoC
- Texas Instruments AM654 SoC
- Texas Instruments IEP driver
- Atheros qca8081 phy
- Marvell 88Q2110 phy
- NXP TJA1120 phy
- WiFi:
- MediaTek mt7981 support
- Can:
- Kvaser SmartFusion2 PCI Express devices
- Allwinner T113 controllers
- Texas Instruments tcan4552/4553 chips
- Bluetooth:
- Intel Gale Peak
- Qualcomm WCN3988 and WCN7850
- NXP AW693 and IW624
- Mediatek MT2925
Drivers:
- Ethernet NICs:
- nVidia/Mellanox:
- mlx5:
- support UDP encapsulation in packet offload mode
- IPsec packet offload support in eswitch mode
- improve aRFS observability by adding new set of counters
- extends MACsec offload support to cover RoCE traffic
- dynamic completion EQs
- mlx4:
- convert to use auxiliary bus instead of custom interface
logic
- Intel
- ice:
- implement switchdev bridge offload, even for LAG
interfaces
- implement SRIOV support for LAG interfaces
- igc:
- add support for multiple in-flight TX timestamps
- Broadcom:
- bnxt:
- use the unified RX page pool buffers for XDP and non-XDP
- use the NAPI skb allocation cache
- OcteonTX2:
- support Round Robin scheduling HTB offload
- TC flower offload support for SPI field
- Freescale:
- add XDP_TX feature support
- AMD:
- ionic: add support for PCI FLR event
- sfc:
- basic conntrack offload
- introduce eth, ipv4 and ipv6 pedit offloads
- ST Microelectronics:
- stmmac: maximze PTP timestamping resolution
- Virtual NICs:
- Microsoft vNIC:
- batch ringing RX queue doorbell on receiving packets
- add page pool for RX buffers
- Virtio vNIC:
- add per queue interrupt coalescing support
- Google vNIC:
- add queue-page-list mode support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add port range matching tc-flower offload
- permit enslavement to netdevices with uppers
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- convert to phylink_pcs
- Renesas:
- r8A779fx: add speed change support
- rzn1: enables vlan support
- Ethernet PHYs:
- convert mv88e6xxx to phylink_pcs
- WiFi:
- Qualcomm Wi-Fi 7 (ath12k):
- extremely High Throughput (EHT) PHY support
- RealTek (rtl8xxxu):
- enable AP mode for: RTL8192FU, RTL8710BU (RTL8188GU),
RTL8192EU and RTL8723BU
- RealTek (rtw89):
- Introduce Time Averaged SAR (TAS) support
- Connector:
- support for event filtering"
* tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1806 commits)
net: ethernet: mtk_wed: minor change in wed_{tx,rx}info_show
net: ethernet: mtk_wed: add some more info in wed_txinfo_show handler
net: stmmac: clarify difference between "interface" and "phy_interface"
r8152: add vendor/device ID pair for D-Link DUB-E250
devlink: move devlink_notify_register/unregister() to dev.c
devlink: move small_ops definition into netlink.c
devlink: move tracepoint definitions into core.c
devlink: push linecard related code into separate file
devlink: push rate related code into separate file
devlink: push trap related code into separate file
devlink: use tracepoint_enabled() helper
devlink: push region related code into separate file
devlink: push param related code into separate file
devlink: push resource related code into separate file
devlink: push dpipe related code into separate file
devlink: move and rename devlink_dpipe_send_and_alloc_skb() helper
devlink: push shared buffer related code into separate file
devlink: push port related code into separate file
devlink: push object register/unregister notifications into separate helpers
inet: fix IP_TRANSPARENT error handling
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZOXTKAAKCRCRxhvAZXjc
oifJAQCzi/p+AdQu8LA/0XvR7fTwaq64ZDCibU4BISuLGT2kEgEAuGbuoFZa0rs2
XYD/s4+gi64p9Z01MmXm2XO1pu3GPg0=
=eJz5
-----END PGP SIGNATURE-----
Merge tag 'v6.6-vfs.ctime' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs timestamp updates from Christian Brauner:
"This adds VFS support for multi-grain timestamps and converts tmpfs,
xfs, ext4, and btrfs to use them. This carries acks from all relevant
filesystems.
The VFS always uses coarse-grained timestamps when updating the ctime
and mtime after a change. This has the benefit of allowing filesystems
to optimize away a lot of metadata updates, down to around 1 per
jiffy, even when a file is under heavy writes.
Unfortunately, this has always been an issue when we're exporting via
NFSv3, which relies on timestamps to validate caches. A lot of changes
can happen in a jiffy, so timestamps aren't sufficient to help the
client decide to invalidate the cache.
Even with NFSv4, a lot of exported filesystems don't properly support
a change attribute and are subject to the same problems with timestamp
granularity. Other applications have similar issues with timestamps
(e.g., backup applications).
If we were to always use fine-grained timestamps, that would improve
the situation, but that becomes rather expensive, as the underlying
filesystem would have to log a lot more metadata updates.
This introduces fine-grained timestamps that are used when they are
actively queried.
This uses the 31st bit of the ctime tv_nsec field to indicate that
something has queried the inode for the mtime or ctime. When this flag
is set, on the next mtime or ctime update, the kernel will fetch a
fine-grained timestamp instead of the usual coarse-grained one.
As POSIX generally mandates that when the mtime changes, the ctime
must also change the kernel always stores normalized ctime values, so
only the first 30 bits of the tv_nsec field are ever used.
Filesytems can opt into this behavior by setting the FS_MGTIME flag in
the fstype. Filesystems that don't set this flag will continue to use
coarse-grained timestamps.
Various preparatory changes, fixes and cleanups are included:
- Fixup all relevant places where POSIX requires updating ctime
together with mtime. This is a wide-range of places and all
maintainers provided necessary Acks.
- Add new accessors for inode->i_ctime directly and change all
callers to rely on them. Plain accesses to inode->i_ctime are now
gone and it is accordingly rename to inode->__i_ctime and commented
as requiring accessors.
- Extend generic_fillattr() to pass in a request mask mirroring in a
sense the statx() uapi. This allows callers to pass in a request
mask to only get a subset of attributes filled in.
- Rework timestamp updates so it's possible to drop the @now
parameter the update_time() inode operation and associated helpers.
- Add inode_update_timestamps() and convert all filesystems to it
removing a bunch of open-coding"
* tag 'v6.6-vfs.ctime' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (107 commits)
btrfs: convert to multigrain timestamps
ext4: switch to multigrain timestamps
xfs: switch to multigrain timestamps
tmpfs: add support for multigrain timestamps
fs: add infrastructure for multigrain timestamps
fs: drop the timespec64 argument from update_time
xfs: have xfs_vn_update_time gets its own timestamp
fat: make fat_update_time get its own timestamp
fat: remove i_version handling from fat_update_time
ubifs: have ubifs_update_time use inode_update_timestamps
btrfs: have it use inode_update_timestamps
fs: drop the timespec64 arg from generic_update_time
fs: pass the request_mask to generic_fillattr
fs: remove silly warning from current_time
gfs2: fix timestamp handling on quota inodes
fs: rename i_ctime field to __i_ctime
selinux: convert to ctime accessor functions
security: convert to ctime accessor functions
apparmor: convert to ctime accessor functions
sunrpc: convert to ctime accessor functions
...
If the caller specifies the connect timeouts in the arguments to
rpc_clnt_add_xprt(), then we shouldn't override them.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
When we create a TCP transport, the connect timeout parameters are
currently fixed to be 90s. This is problematic in the pNFS flexfiles
case, where we may have multiple mirrors, and we would like to fail over
quickly to the next mirror if a data server is down.
This patch adds the ability to specify the connection parameters at RPC
client creation time.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Instead of requiring the requests to redrive the connection several
times, just let the TCP connect code manage it now that we've adjusted
the TCP_SYNCNT value.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Set the TCP SYN count so that we abort the connection attempt at around
the expected timeout value.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
rpcrdma_bc_post_recv() is never implemented since introduction in
commit f531a5dbc4 ("xprtrdma: Pre-allocate backward rpc_rqst and send/receive buffers").
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If the pages are in HIGHMEM then we need to make sure they're mapped
before trying to read data off of them, otherwise we could end up with a
NULL pointer dereference.
The downside to this is that we need an extra cleanup step at the end of
decode to kunmap() the last page. I introduced an xdr_finish_decode()
function to do this. Right now this function only calls the
unmap_current_page() function, but other generic cleanup steps could be
added in the future if we come across anything else.
Reported-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Highlights include:
Stable fixes
- NFS: Fix a use after free in nfs_direct_join_group()
Bugfixes
- NFS: Fix a sysfs server name memory leak
- NFS: Fix a lock recovery hang in NFSv4.0
- NFS: Fix page free in the error path for nfs42_proc_getxattr
- NFS: Fix page free in the error path for __nfs4_get_acl_uncached
- SUNRPC/rdma: Fix receive buffer dma-mapping after a server disconnect
-----BEGIN PGP SIGNATURE-----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=nd41
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-6.5-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client fixes from Trond Myklebust:
- fix a use after free in nfs_direct_join_group() (Cc: stable)
- fix sysfs server name memory leak
- fix lock recovery hang in NFSv4.0
- fix page free in the error path for nfs42_proc_getxattr() and
__nfs4_get_acl_uncached()
- SUNRPC/rdma: fix receive buffer dma-mapping after a server disconnect
* tag 'nfs-for-6.5-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
xprtrdma: Remap Receive buffers after a reconnect
NFSv4: fix out path in __nfs4_get_acl_uncached
NFSv4.2: fix error handling in nfs42_proc_getxattr
NFS: Fix sysfs server name memory leak
NFS: Fix a use after free in nfs_direct_join_group()
NFSv4: Fix dropped lock for racing OPEN and delegation return
On server-initiated disconnect, rpcrdma_xprt_disconnect() was DMA-
unmapping the Receive buffers, but rpcrdma_post_recvs() neglected
to remap them after a new connection had been established. The
result was immediate failure of the new connection with the Receives
flushing with LOCAL_PROT_ERR.
Fixes: 671c450b6f ("xprtrdma: Fix oops in Receive handler after device removal")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/sfc/tc.c
fa165e1949 ("sfc: don't unregister flow_indr if it was never registered")
3bf969e88a ("sfc: add MAE table machinery for conntrack table")
https://lore.kernel.org/all/20230818112159.7430e9b4@canb.auug.org.au/
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
svc_tcp_sendmsg used to factor in the xdr->page_base when sending pages,
but commit 5df5dd03a8 ("sunrpc: Use sendmsg(MSG_SPLICE_PAGES) rather
then sendpage") dropped that part of the handling. Fix it by setting
the bv_offset of the first bvec.
Fixes: 5df5dd03a8 ("sunrpc: Use sendmsg(MSG_SPLICE_PAGES) rather then sendpage")
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Kernel TLS consumers will need definitions of various parts of the
TLS protocol, but often do not need the function declarations and
other infrastructure provided in <net/tls.h>.
Break out existing standardized protocol elements into a separate
header, and make room for a few more elements in subsequent patches.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/169047931374.5241.7713175865185969309.stgit@oracle-102.nfsv4bat.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In later patches, we're going to change how the inode's ctime field is
used. Switch to using accessor functions instead of raw accesses of
inode->i_ctime.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230705190309.579783-86-jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Highlights include:
Stable fixes and other bugfixes:
- nfs: don't report STATX_BTIME in ->getattr
- Revert "NFSv4: Retry LOCK on OLD_STATEID during delegation return"
since it breaks NFSv4 state recovery.
- NFSv4.1: freeze the session table upon receiving NFS4ERR_BADSESSION
- Fix the NFSv4.2 xattr cache shrinker_id
- Force a ctime update after a NFSv4.2 SETXATTR call
Features and cleanups:
- NFS and RPC over TLS client code from Chuck Lever.
- Support for use of abstract unix socket addresses with the rpcbind
daemon.
- Sysfs API to allow shutdown of the kernel RPC client and prevent
umount() hangs if the server is known to be permanently down.
- XDR cleanups from Anna.
-----BEGIN PGP SIGNATURE-----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=leGh
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-6.5-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Stable fixes and other bugfixes:
- nfs: don't report STATX_BTIME in ->getattr
- Revert 'NFSv4: Retry LOCK on OLD_STATEID during delegation return'
since it breaks NFSv4 state recovery.
- NFSv4.1: freeze the session table upon receiving NFS4ERR_BADSESSION
- Fix the NFSv4.2 xattr cache shrinker_id
- Force a ctime update after a NFSv4.2 SETXATTR call
Features and cleanups:
- NFS and RPC over TLS client code from Chuck Lever
- Support for use of abstract unix socket addresses with the rpcbind
daemon
- Sysfs API to allow shutdown of the kernel RPC client and prevent
umount() hangs if the server is known to be permanently down
- XDR cleanups from Anna"
* tag 'nfs-for-6.5-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (33 commits)
Revert "NFSv4: Retry LOCK on OLD_STATEID during delegation return"
NFS: Don't cleanup sysfs superblock entry if uninitialized
nfs: don't report STATX_BTIME in ->getattr
NFSv4.1: freeze the session table upon receiving NFS4ERR_BADSESSION
NFSv4.2: fix wrong shrinker_id
NFSv4: Clean up some shutdown loops
NFS: Cancel all existing RPC tasks when shutdown
NFS: add sysfs shutdown knob
NFS: add a sysfs link to the acl rpc_client
NFS: add a sysfs link to the lockd rpc_client
NFS: Add sysfs links to sunrpc clients for nfs_clients
NFS: add superblock sysfs entries
NFS: Make all of /sys/fs/nfs network-namespace unique
NFS: Open-code the nfs_kset kset_create_and_add()
NFS: rename nfs_client_kobj to nfs_net_kobj
NFS: rename nfs_client_kset to nfs_kset
NFS: Add an "xprtsec=" NFS mount option
NFS: Have struct nfs_client carry a TLS policy field
SUNRPC: Add a TCP-with-TLS RPC transport class
SUNRPC: Capture CMSG metadata on client-side receive
...
Core
----
- Rework the sendpage & splice implementations. Instead of feeding
data into sockets page by page extend sendmsg handlers to support
taking a reference on the data, controlled by a new flag called
MSG_SPLICE_PAGES. Rework the handling of unexpected-end-of-file
to invoke an additional callback instead of trying to predict what
the right combination of MORE/NOTLAST flags is.
Remove the MSG_SENDPAGE_NOTLAST flag completely.
- Implement SCM_PIDFD, a new type of CMSG type analogous to
SCM_CREDENTIALS, but it contains pidfd instead of plain pid.
- Enable socket busy polling with CONFIG_RT.
- Improve reliability and efficiency of reporting for ref_tracker.
- Auto-generate a user space C library for various Netlink families.
Protocols
---------
- Allow TCP to shrink the advertised window when necessary, prevent
sk_rcvbuf auto-tuning from growing the window all the way up to
tcp_rmem[2].
- Use per-VMA locking for "page-flipping" TCP receive zerocopy.
- Prepare TCP for device-to-device data transfers, by making sure
that payloads are always attached to skbs as page frags.
- Make the backoff time for the first N TCP SYN retransmissions
linear. Exponential backoff is unnecessarily conservative.
- Create a new MPTCP getsockopt to retrieve all info (MPTCP_FULL_INFO).
- Avoid waking up applications using TLS sockets until we have
a full record.
- Allow using kernel memory for protocol ioctl callbacks, paving
the way to issuing ioctls over io_uring.
- Add nolocalbypass option to VxLAN, forcing packets to be fully
encapsulated even if they are destined for a local IP address.
- Make TCPv4 use consistent hash in TIME_WAIT and SYN_RECV. Ensure
in-kernel ECMP implementation (e.g. Open vSwitch) select the same
link for all packets. Support L4 symmetric hashing in Open vSwitch.
- PPPoE: make number of hash bits configurable.
- Allow DNS to be overwritten by DHCPACK in the in-kernel DHCP client
(ipconfig).
- Add layer 2 miss indication and filtering, allowing higher layers
(e.g. ACL filters) to make forwarding decisions based on whether
packet matched forwarding state in lower devices (bridge).
- Support matching on Connectivity Fault Management (CFM) packets.
- Hide the "link becomes ready" IPv6 messages by demoting their
printk level to debug.
- HSR: don't enable promiscuous mode if device offloads the proto.
- Support active scanning in IEEE 802.15.4.
- Continue work on Multi-Link Operation for WiFi 7.
BPF
---
- Add precision propagation for subprogs and callbacks. This allows
maintaining verification efficiency when subprograms are used,
or in fact passing the verifier at all for complex programs,
especially those using open-coded iterators.
- Improve BPF's {g,s}setsockopt() length handling. Previously BPF
assumed the length is always equal to the amount of written data.
But some protos allow passing a NULL buffer to discover what
the output buffer *should* be, without writing anything.
- Accept dynptr memory as memory arguments passed to helpers.
- Add routing table ID to bpf_fib_lookup BPF helper.
- Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands.
- Drop bpf_capable() check in BPF_MAP_FREEZE command (used to mark
maps as read-only).
- Show target_{obj,btf}_id in tracing link fdinfo.
- Addition of several new kfuncs (most of the names are self-explanatory):
- Add a set of new dynptr kfuncs: bpf_dynptr_adjust(),
bpf_dynptr_is_null(), bpf_dynptr_is_rdonly(), bpf_dynptr_size()
and bpf_dynptr_clone().
- bpf_task_under_cgroup()
- bpf_sock_destroy() - force closing sockets
- bpf_cpumask_first_and(), rework bpf_cpumask_any*() kfuncs
Netfilter
---------
- Relax set/map validation checks in nf_tables. Allow checking
presence of an entry in a map without using the value.
- Increase ip_vs_conn_tab_bits range for 64BIT builds.
- Allow updating size of a set.
- Improve NAT tuple selection when connection is closing.
Driver API
----------
- Integrate netdev with LED subsystem, to allow configuring HW
"offloaded" blinking of LEDs based on link state and activity
(i.e. packets coming in and out).
- Support configuring rate selection pins of SFP modules.
- Factor Clause 73 auto-negotiation code out of the drivers, provide
common helper routines.
- Add more fool-proof helpers for managing lifetime of MDIO devices
associated with the PCS layer.
- Allow drivers to report advanced statistics related to Time Aware
scheduler offload (taprio).
- Allow opting out of VF statistics in link dump, to allow more VFs
to fit into the message.
- Split devlink instance and devlink port operations.
New hardware / drivers
----------------------
- Ethernet:
- Synopsys EMAC4 IP support (stmmac)
- Marvell 88E6361 8 port (5x1GE + 3x2.5GE) switches
- Marvell 88E6250 7 port switches
- Microchip LAN8650/1 Rev.B0 PHYs
- MediaTek MT7981/MT7988 built-in 1GE PHY driver
- WiFi:
- Realtek RTL8192FU, 2.4 GHz, b/g/n mode, 2T2R, 300 Mbps
- Realtek RTL8723DS (SDIO variant)
- Realtek RTL8851BE
- CAN:
- Fintek F81604
Drivers
-------
- Ethernet NICs:
- Intel (100G, ice):
- support dynamic interrupt allocation
- use meta data match instead of VF MAC addr on slow-path
- nVidia/Mellanox:
- extend link aggregation to handle 4, rather than just 2 ports
- spawn sub-functions without any features by default
- OcteonTX2:
- support HTB (Tx scheduling/QoS) offload
- make RSS hash generation configurable
- support selecting Rx queue using TC filters
- Wangxun (ngbe/txgbe):
- add basic Tx/Rx packet offloads
- add phylink support (SFP/PCS control)
- Freescale/NXP (enetc):
- report TAPRIO packet statistics
- Solarflare/AMD:
- support matching on IP ToS and UDP source port of outer header
- VxLAN and GENEVE tunnel encapsulation over IPv4 or IPv6
- add devlink dev info support for EF10
- Virtual NICs:
- Microsoft vNIC:
- size the Rx indirection table based on requested configuration
- support VLAN tagging
- Amazon vNIC:
- try to reuse Rx buffers if not fully consumed, useful for ARM
servers running with 16kB pages
- Google vNIC:
- support TCP segmentation of >64kB frames
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- enable USXGMII (88E6191X)
- Microchip:
- lan966x: add support for Egress Stage 0 ACL engine
- lan966x: support mapping packet priority to internal switch
priority (based on PCP or DSCP)
- Ethernet PHYs:
- Broadcom PHYs:
- support for Wake-on-LAN for BCM54210E/B50212E
- report LPI counter
- Microsemi PHYs: support RGMII delay configuration (VSC85xx)
- Micrel PHYs: receive timestamp in the frame (LAN8841)
- Realtek PHYs: support optional external PHY clock
- Altera TSE PCS: merge the driver into Lynx PCS which it is
a variant of
- CAN: Kvaser PCIEcan:
- support packet timestamping
- WiFi:
- Intel (iwlwifi):
- major update for new firmware and Multi-Link Operation (MLO)
- configuration rework to drop test devices and split
the different families
- support for segmented PNVM images and power tables
- new vendor entries for PPAG (platform antenna gain) feature
- Qualcomm 802.11ax (ath11k):
- Multiple Basic Service Set Identifier (MBSSID) and
Enhanced MBSSID Advertisement (EMA) support in AP mode
- support factory test mode
- RealTek (rtw89):
- add RSSI based antenna diversity
- support U-NII-4 channels on 5 GHz band
- RealTek (rtl8xxxu):
- AP mode support for 8188f
- support USB RX aggregation for the newer chips
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=9i4I
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking changes from Jakub Kicinski:
"WiFi 7 and sendpage changes are the biggest pieces of work for this
release. The latter will definitely require fixes but I think that we
got it to a reasonable point.
Core:
- Rework the sendpage & splice implementations
Instead of feeding data into sockets page by page extend sendmsg
handlers to support taking a reference on the data, controlled by a
new flag called MSG_SPLICE_PAGES
Rework the handling of unexpected-end-of-file to invoke an
additional callback instead of trying to predict what the right
combination of MORE/NOTLAST flags is
Remove the MSG_SENDPAGE_NOTLAST flag completely
- Implement SCM_PIDFD, a new type of CMSG type analogous to
SCM_CREDENTIALS, but it contains pidfd instead of plain pid
- Enable socket busy polling with CONFIG_RT
- Improve reliability and efficiency of reporting for ref_tracker
- Auto-generate a user space C library for various Netlink families
Protocols:
- Allow TCP to shrink the advertised window when necessary, prevent
sk_rcvbuf auto-tuning from growing the window all the way up to
tcp_rmem[2]
- Use per-VMA locking for "page-flipping" TCP receive zerocopy
- Prepare TCP for device-to-device data transfers, by making sure
that payloads are always attached to skbs as page frags
- Make the backoff time for the first N TCP SYN retransmissions
linear. Exponential backoff is unnecessarily conservative
- Create a new MPTCP getsockopt to retrieve all info
(MPTCP_FULL_INFO)
- Avoid waking up applications using TLS sockets until we have a full
record
- Allow using kernel memory for protocol ioctl callbacks, paving the
way to issuing ioctls over io_uring
- Add nolocalbypass option to VxLAN, forcing packets to be fully
encapsulated even if they are destined for a local IP address
- Make TCPv4 use consistent hash in TIME_WAIT and SYN_RECV. Ensure
in-kernel ECMP implementation (e.g. Open vSwitch) select the same
link for all packets. Support L4 symmetric hashing in Open vSwitch
- PPPoE: make number of hash bits configurable
- Allow DNS to be overwritten by DHCPACK in the in-kernel DHCP client
(ipconfig)
- Add layer 2 miss indication and filtering, allowing higher layers
(e.g. ACL filters) to make forwarding decisions based on whether
packet matched forwarding state in lower devices (bridge)
- Support matching on Connectivity Fault Management (CFM) packets
- Hide the "link becomes ready" IPv6 messages by demoting their
printk level to debug
- HSR: don't enable promiscuous mode if device offloads the proto
- Support active scanning in IEEE 802.15.4
- Continue work on Multi-Link Operation for WiFi 7
BPF:
- Add precision propagation for subprogs and callbacks. This allows
maintaining verification efficiency when subprograms are used, or
in fact passing the verifier at all for complex programs,
especially those using open-coded iterators
- Improve BPF's {g,s}setsockopt() length handling. Previously BPF
assumed the length is always equal to the amount of written data.
But some protos allow passing a NULL buffer to discover what the
output buffer *should* be, without writing anything
- Accept dynptr memory as memory arguments passed to helpers
- Add routing table ID to bpf_fib_lookup BPF helper
- Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands
- Drop bpf_capable() check in BPF_MAP_FREEZE command (used to mark
maps as read-only)
- Show target_{obj,btf}_id in tracing link fdinfo
- Addition of several new kfuncs (most of the names are
self-explanatory):
- Add a set of new dynptr kfuncs: bpf_dynptr_adjust(),
bpf_dynptr_is_null(), bpf_dynptr_is_rdonly(), bpf_dynptr_size()
and bpf_dynptr_clone().
- bpf_task_under_cgroup()
- bpf_sock_destroy() - force closing sockets
- bpf_cpumask_first_and(), rework bpf_cpumask_any*() kfuncs
Netfilter:
- Relax set/map validation checks in nf_tables. Allow checking
presence of an entry in a map without using the value
- Increase ip_vs_conn_tab_bits range for 64BIT builds
- Allow updating size of a set
- Improve NAT tuple selection when connection is closing
Driver API:
- Integrate netdev with LED subsystem, to allow configuring HW
"offloaded" blinking of LEDs based on link state and activity
(i.e. packets coming in and out)
- Support configuring rate selection pins of SFP modules
- Factor Clause 73 auto-negotiation code out of the drivers, provide
common helper routines
- Add more fool-proof helpers for managing lifetime of MDIO devices
associated with the PCS layer
- Allow drivers to report advanced statistics related to Time Aware
scheduler offload (taprio)
- Allow opting out of VF statistics in link dump, to allow more VFs
to fit into the message
- Split devlink instance and devlink port operations
New hardware / drivers:
- Ethernet:
- Synopsys EMAC4 IP support (stmmac)
- Marvell 88E6361 8 port (5x1GE + 3x2.5GE) switches
- Marvell 88E6250 7 port switches
- Microchip LAN8650/1 Rev.B0 PHYs
- MediaTek MT7981/MT7988 built-in 1GE PHY driver
- WiFi:
- Realtek RTL8192FU, 2.4 GHz, b/g/n mode, 2T2R, 300 Mbps
- Realtek RTL8723DS (SDIO variant)
- Realtek RTL8851BE
- CAN:
- Fintek F81604
Drivers:
- Ethernet NICs:
- Intel (100G, ice):
- support dynamic interrupt allocation
- use meta data match instead of VF MAC addr on slow-path
- nVidia/Mellanox:
- extend link aggregation to handle 4, rather than just 2 ports
- spawn sub-functions without any features by default
- OcteonTX2:
- support HTB (Tx scheduling/QoS) offload
- make RSS hash generation configurable
- support selecting Rx queue using TC filters
- Wangxun (ngbe/txgbe):
- add basic Tx/Rx packet offloads
- add phylink support (SFP/PCS control)
- Freescale/NXP (enetc):
- report TAPRIO packet statistics
- Solarflare/AMD:
- support matching on IP ToS and UDP source port of outer
header
- VxLAN and GENEVE tunnel encapsulation over IPv4 or IPv6
- add devlink dev info support for EF10
- Virtual NICs:
- Microsoft vNIC:
- size the Rx indirection table based on requested
configuration
- support VLAN tagging
- Amazon vNIC:
- try to reuse Rx buffers if not fully consumed, useful for ARM
servers running with 16kB pages
- Google vNIC:
- support TCP segmentation of >64kB frames
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- enable USXGMII (88E6191X)
- Microchip:
- lan966x: add support for Egress Stage 0 ACL engine
- lan966x: support mapping packet priority to internal switch
priority (based on PCP or DSCP)
- Ethernet PHYs:
- Broadcom PHYs:
- support for Wake-on-LAN for BCM54210E/B50212E
- report LPI counter
- Microsemi PHYs: support RGMII delay configuration (VSC85xx)
- Micrel PHYs: receive timestamp in the frame (LAN8841)
- Realtek PHYs: support optional external PHY clock
- Altera TSE PCS: merge the driver into Lynx PCS which it is a
variant of
- CAN: Kvaser PCIEcan:
- support packet timestamping
- WiFi:
- Intel (iwlwifi):
- major update for new firmware and Multi-Link Operation (MLO)
- configuration rework to drop test devices and split the
different families
- support for segmented PNVM images and power tables
- new vendor entries for PPAG (platform antenna gain) feature
- Qualcomm 802.11ax (ath11k):
- Multiple Basic Service Set Identifier (MBSSID) and Enhanced
MBSSID Advertisement (EMA) support in AP mode
- support factory test mode
- RealTek (rtw89):
- add RSSI based antenna diversity
- support U-NII-4 channels on 5 GHz band
- RealTek (rtl8xxxu):
- AP mode support for 8188f
- support USB RX aggregation for the newer chips"
* tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1602 commits)
net: scm: introduce and use scm_recv_unix helper
af_unix: Skip SCM_PIDFD if scm->pid is NULL.
net: lan743x: Simplify comparison
netlink: Add __sock_i_ino() for __netlink_diag_dump().
net: dsa: avoid suspicious RCU usage for synced VLAN-aware MAC addresses
Revert "af_unix: Call scm_recv() only after scm_set_cred()."
phylink: ReST-ify the phylink_pcs_neg_mode() kdoc
libceph: Partially revert changes to support MSG_SPLICE_PAGES
net: phy: mscc: fix packet loss due to RGMII delays
net: mana: use vmalloc_array and vcalloc
net: enetc: use vmalloc_array and vcalloc
ionic: use vmalloc_array and vcalloc
pds_core: use vmalloc_array and vcalloc
gve: use vmalloc_array and vcalloc
octeon_ep: use vmalloc_array and vcalloc
net: usb: qmi_wwan: add u-blox 0x1312 composition
perf trace: fix MSG_SPLICE_PAGES build error
ipvlan: Fix return value of ipvlan_queue_xmit()
netfilter: nf_tables: fix underflow in chain reference counter
netfilter: nf_tables: unbind non-anonymous set if rule construction fails
...
- Yosry has also eliminated cgroup's atomic rstat flushing.
- Nhat Pham adds the new cachestat() syscall. It provides userspace
with the ability to query pagecache status - a similar concept to
mincore() but more powerful and with improved usability.
- Mel Gorman provides more optimizations for compaction, reducing the
prevalence of page rescanning.
- Lorenzo Stoakes has done some maintanance work on the get_user_pages()
interface.
- Liam Howlett continues with cleanups and maintenance work to the maple
tree code. Peng Zhang also does some work on maple tree.
- Johannes Weiner has done some cleanup work on the compaction code.
- David Hildenbrand has contributed additional selftests for
get_user_pages().
- Thomas Gleixner has contributed some maintenance and optimization work
for the vmalloc code.
- Baolin Wang has provided some compaction cleanups,
- SeongJae Park continues maintenance work on the DAMON code.
- Huang Ying has done some maintenance on the swap code's usage of
device refcounting.
- Christoph Hellwig has some cleanups for the filemap/directio code.
- Ryan Roberts provides two patch series which yield some
rationalization of the kernel's access to pte entries - use the provided
APIs rather than open-coding accesses.
- Lorenzo Stoakes has some fixes to the interaction between pagecache
and directio access to file mappings.
- John Hubbard has a series of fixes to the MM selftesting code.
- ZhangPeng continues the folio conversion campaign.
- Hugh Dickins has been working on the pagetable handling code, mainly
with a view to reducing the load on the mmap_lock.
- Catalin Marinas has reduced the arm64 kmalloc() minimum alignment from
128 to 8.
- Domenico Cerasuolo has improved the zswap reclaim mechanism by
reorganizing the LRU management.
- Matthew Wilcox provides some fixups to make gfs2 work better with the
buffer_head code.
- Vishal Moola also has done some folio conversion work.
- Matthew Wilcox has removed the remnants of the pagevec code - their
functionality is migrated over to struct folio_batch.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZJejewAKCRDdBJ7gKXxA
joggAPwKMfT9lvDBEUnJagY7dbDPky1cSYZdJKxxM2cApGa42gEA6Cl8HRAWqSOh
J0qXCzqaaN8+BuEyLGDVPaXur9KirwY=
=B7yQ
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull mm updates from Andrew Morton:
- Yosry Ahmed brought back some cgroup v1 stats in OOM logs
- Yosry has also eliminated cgroup's atomic rstat flushing
- Nhat Pham adds the new cachestat() syscall. It provides userspace
with the ability to query pagecache status - a similar concept to
mincore() but more powerful and with improved usability
- Mel Gorman provides more optimizations for compaction, reducing the
prevalence of page rescanning
- Lorenzo Stoakes has done some maintanance work on the
get_user_pages() interface
- Liam Howlett continues with cleanups and maintenance work to the
maple tree code. Peng Zhang also does some work on maple tree
- Johannes Weiner has done some cleanup work on the compaction code
- David Hildenbrand has contributed additional selftests for
get_user_pages()
- Thomas Gleixner has contributed some maintenance and optimization
work for the vmalloc code
- Baolin Wang has provided some compaction cleanups,
- SeongJae Park continues maintenance work on the DAMON code
- Huang Ying has done some maintenance on the swap code's usage of
device refcounting
- Christoph Hellwig has some cleanups for the filemap/directio code
- Ryan Roberts provides two patch series which yield some
rationalization of the kernel's access to pte entries - use the
provided APIs rather than open-coding accesses
- Lorenzo Stoakes has some fixes to the interaction between pagecache
and directio access to file mappings
- John Hubbard has a series of fixes to the MM selftesting code
- ZhangPeng continues the folio conversion campaign
- Hugh Dickins has been working on the pagetable handling code, mainly
with a view to reducing the load on the mmap_lock
- Catalin Marinas has reduced the arm64 kmalloc() minimum alignment
from 128 to 8
- Domenico Cerasuolo has improved the zswap reclaim mechanism by
reorganizing the LRU management
- Matthew Wilcox provides some fixups to make gfs2 work better with the
buffer_head code
- Vishal Moola also has done some folio conversion work
- Matthew Wilcox has removed the remnants of the pagevec code - their
functionality is migrated over to struct folio_batch
* tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (380 commits)
mm/hugetlb: remove hugetlb_set_page_subpool()
mm: nommu: correct the range of mmap_sem_read_lock in task_mem()
hugetlb: revert use of page_cache_next_miss()
Revert "page cache: fix page_cache_next/prev_miss off by one"
mm/vmscan: fix root proactive reclaim unthrottling unbalanced node
mm: memcg: rename and document global_reclaim()
mm: kill [add|del]_page_to_lru_list()
mm: compaction: convert to use a folio in isolate_migratepages_block()
mm: zswap: fix double invalidate with exclusive loads
mm: remove unnecessary pagevec includes
mm: remove references to pagevec
mm: rename invalidate_mapping_pagevec to mapping_try_invalidate
mm: remove struct pagevec
net: convert sunrpc from pagevec to folio_batch
i915: convert i915_gpu_error to use a folio_batch
pagevec: rename fbatch_count()
mm: remove check_move_unevictable_pages()
drm: convert drm_gem_put_pages() to use a folio_batch
i915: convert shmem_sg_free_table() to use a folio_batch
scatterlist: add sg_set_folio()
...
Remove the last usage of pagevecs. There is a slight change here; we now
free the folio_batch as soon as it fills up instead of freeing the
folio_batch when we try to add a page to a full batch. This should have
no effect in practice.
Link: https://lkml.kernel.org/r/20230621164557.3510324-10-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Within each nfs_server sysfs tree, add an entry named "shutdown". Writing
1 to this file will set the cl_shutdown bit on the rpc_clnt structs
associated with that mount. If cl_shutdown is set, the task scheduler
immediately returns -EIO for new tasks.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
For the general and state management nfs_client under each mount, create
symlinks to their respective rpc_client sysfs entries.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Use the new TLS handshake API to enable the SunRPC client code
to request a TLS handshake. This implements support for RFC 9289,
only on TCP sockets.
Upper layers such as NFS use RPC-with-TLS to protect in-transit
traffic.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
kTLS sockets use CMSG to report decryption errors and the need
for session re-keying.
For RPC-with-TLS, an "application data" message contains a ULP
payload, and that is passed along to the RPC client. An "alert"
message triggers connection reset. Everything else is discarded.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
The RPC header parser doesn't recognize TLS handshake traffic, so it
will close the connection prematurely with an error. To avoid that,
shunt the transport's data_ready callback when there is a TLS
handshake in progress.
The XPRT_SOCK_IGNORE_RECV flag will be toggled by code added in a
subsequent patch.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
The new authentication flavor is used only to discover peer support
for RPC-over-TLS.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Pass the upper layer's rpc_create_args to the rpc_clnt_new()
tracepoint so additional parts of the upper layer's request can be
recorded.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Add an initial set of policies along with fields for upper layers to
pass the requested policy down to the transport layer.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
NFS is primarily name-spaced using network namespaces. However it
contacts rpcbind (and gss_proxy) using AF_UNIX sockets which are
name-spaced using the mount namespaces. This requires a container using
NFSv3 (the form that requires rpcbind) to manage both network and mount
namespaces, which can seem an unnecessary burden.
As NFS is primarily a network service it makes sense to use network
namespaces as much as possible, and to prefer to communicate with an
rpcbind running in the same network namespace. This can be done, while
preserving the benefits of AF_UNIX sockets, by using an abstract socket
address.
An abstract address has a nul at the start of sun_path, and a length
that is exactly the complete size of the sockaddr_un up to the end of
the name, NOT including any trailing nul (which is not part of the
address).
Abstract addresses are local to a network namespace - regular AF_UNIX
path names a resolved in the mount namespace ignoring the network
namespace.
This patch causes rpcb to first try an abstract address before
continuing with regular AF_UNIX and then IP addresses. This ensures
backwards compatibility.
Choosing the name needs some care as the same address will be configured
for rpcbind, and needs to be built in to libtirpc for this enhancement
to be fully successful. There is no formal standard for choosing
abstract addresses. The defacto standard appears to be to use a path
name similar to what would be used for a filesystem AF_UNIX address -
but with a leading nul.
In that case
"\0/var/run/rpcbind.sock"
seems like the best choice. However at this time /var/run is deprecated
in favour of /run, so
"\0/run/rpcbind.sock"
might be better.
Though as we are deliberately moving away from using the filesystem it
might seem more sensible to explicitly break the connection and just
have
"\0rpcbind.socket"
using the same name as the systemd unit file..
This patch chooses the second option, which seems least likely to raise
objections.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
An "abtract" address for an AF_UNIX socket start with a nul and can
contain any bytes for the given length, but traditionally doesn't
contain other nuls. When reported, the leading nul is replaced by '@'.
sunrpc currently rejects connections to these addresses and reports them
as an empty string. To provide support for future use of these
addresses, allow them for outgoing connections and report them more
usefully.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Commit 7d81ee8722 ("svcrdma: Single-stage RDMA Read") changed the
behavior of svc_rdma_recvfrom() but neglected to update the
documenting comment.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Remove a couple of dprintk call sites that are of little value.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The preceding block comment before svc_register_xprt_class() is
not related to that function.
While we're here, add proper documenting comments for these two
publicly-visible functions.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
This event brackets the svcrdma_post_* trace points. If this trace
event is enabled but does not appear as expected, that indicates a
chunk_ctxt leak.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Try to catch incorrect calling contexts mechanically rather than by
code review.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Micro-optimization: Call ktime_get() only when ->xpo_recvfrom() has
given us a full RPC message to process. rq_stime isn't used
otherwise, so this avoids pointless work.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Now that we have bulk page allocation and release APIs, it's more
efficient to use those than it is for nfsd threads to wait for send
completions. Previous patches have eliminated the calls to
wait_for_completion() and complete(), in order to avoid scheduler
overhead.
Now release pages-under-I/O in the send completion handler using
the efficient bulk release API.
I've measured a 7% reduction in cumulative CPU utilization in
svc_rdma_sendto(), svc_rdma_wc_send(), and svc_xprt_release(). In
particular, using release_pages() instead of complete() cuts the
time per svc_rdma_wc_send() call by two-thirds. This helps improve
scalability because svc_rdma_wc_send() is single-threaded per
connection.
Reviewed-by: Tom Talpey <tom@talpey.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
I noticed that svc_rqst_release_pages() was still unnecessarily
releasing a page when svc_rdma_recvfrom() returns zero.
Fixes: a53d5cb064 ("svcrdma: Avoid releasing a page in svc_xprt_release()")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
When transmitting data, call down into TCP using sendmsg with
MSG_SPLICE_PAGES to indicate that content should be spliced rather than
performing sendpage calls to transmit header, data pages and trailer.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
cc: Trond Myklebust <trond.myklebust@hammerspace.com>
cc: Anna Schumaker <anna@kernel.org>
cc: Jeff Layton <jlayton@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Get rid of the completion wait in svc_rdma_sendto(), and release
pages in the send completion handler again. A subsequent patch will
handle releasing those pages more efficiently.
Reverted by hand: patch -R would not apply cleanly.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Pre-requisite for releasing pages in the send completion handler.
Reverted by hand: patch -R would not apply cleanly.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Pre-requisite for releasing pages in the send completion handler.
Reverted by hand: patch -R would not apply cleanly.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The physical device's favored NUMA node ID is available when
allocating a rw_ctxt. Use that value instead of relying on the
assumption that the memory allocation happens to be running on a
node close to the device.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The physical device's favored NUMA node ID is available when
allocating a send_ctxt. Use that value instead of relying on the
assumption that the memory allocation happens to be running on a
node close to the device.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The physical device's favored NUMA node ID is available when
allocating a recv_ctxt. Use that value instead of relying on the
assumption that the memory allocation happens to be running on a
node close to the device.
This clean up eliminates the hack of destroying recv_ctxts that
were not created by the receive CQ thread -- recv_ctxts are now
always allocated on a "good" node.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The physical device's NUMA node ID is available when allocating an
svc_xprt for an incoming connection. Use that value to ensure the
svc_xprt structure is allocated on the NUMA node closest to the
device.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Now that the preparation of an rq_vec has been removed from the
generic read path, nfsd_splice_read() no longer needs to reset
rq_next_page.
nfsd4_encode_read() calls nfsd_splice_read() directly. As far as I
can ascertain, resetting rq_next_page for NFSv4 splice reads is
unnecessary because rq_next_page is already set correctly.
Moreover, resetting it might even be incorrect if previous
operations in the COMPOUND have already consumed at least a page of
the send buffer. I would expect that the result would be encoding
the READ payload over previously-encoded results.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
svc_init_buffer() is careful to allocate the initial set of server
thread buffer pages from memory on the local NUMA node.
svc_alloc_arg() should also be that careful.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Capture a timestamp and pointer address during the creation and
destruction of struct svc_sock to record its lifetime. This helps
to diagnose transport reference counting issues.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The -ENOMEM arm could fire repeatedly if the system runs low on
memory, so remove it.
Don't bother to trace -EAGAIN error events, since those fire after
a listener is created (with no work done) and once again after an
accept has been handled successfully (again, with no work done).
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
When enabled, this dprintk() fires for every incoming RPC, which is
an enormous amount of log traffic. These days, after the first few
hundred log messages, the system journald is just going to mute it,
along with all other NFSD debug output.
Let's rely on trace points for this high-traffic information
instead.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The correct function name is svc_tcp_listen_data_ready().
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
After the listener svc_sock is freed, and before invoking svc_tcp_accept()
for the established child sock, there is a window that the newsock
retaining a freed listener svc_sock in sk_user_data which cloning from
parent. In the race window, if data is received on the newsock, we will
observe use-after-free report in svc_tcp_listen_data_ready().
Reproduce by two tasks:
1. while :; do rpc.nfsd 0 ; rpc.nfsd; done
2. while :; do echo "" | ncat -4 127.0.0.1 2049 ; done
KASAN report:
==================================================================
BUG: KASAN: slab-use-after-free in svc_tcp_listen_data_ready+0x1cf/0x1f0 [sunrpc]
Read of size 8 at addr ffff888139d96228 by task nc/102553
CPU: 7 PID: 102553 Comm: nc Not tainted 6.3.0+ #18
Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020
Call Trace:
<IRQ>
dump_stack_lvl+0x33/0x50
print_address_description.constprop.0+0x27/0x310
print_report+0x3e/0x70
kasan_report+0xae/0xe0
svc_tcp_listen_data_ready+0x1cf/0x1f0 [sunrpc]
tcp_data_queue+0x9f4/0x20e0
tcp_rcv_established+0x666/0x1f60
tcp_v4_do_rcv+0x51c/0x850
tcp_v4_rcv+0x23fc/0x2e80
ip_protocol_deliver_rcu+0x62/0x300
ip_local_deliver_finish+0x267/0x350
ip_local_deliver+0x18b/0x2d0
ip_rcv+0x2fb/0x370
__netif_receive_skb_one_core+0x166/0x1b0
process_backlog+0x24c/0x5e0
__napi_poll+0xa2/0x500
net_rx_action+0x854/0xc90
__do_softirq+0x1bb/0x5de
do_softirq+0xcb/0x100
</IRQ>
<TASK>
...
</TASK>
Allocated by task 102371:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
__kasan_kmalloc+0x7b/0x90
svc_setup_socket+0x52/0x4f0 [sunrpc]
svc_addsock+0x20d/0x400 [sunrpc]
__write_ports_addfd+0x209/0x390 [nfsd]
write_ports+0x239/0x2c0 [nfsd]
nfsctl_transaction_write+0xac/0x110 [nfsd]
vfs_write+0x1c3/0xae0
ksys_write+0xed/0x1c0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
Freed by task 102551:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
kasan_save_free_info+0x2a/0x50
__kasan_slab_free+0x106/0x190
__kmem_cache_free+0x133/0x270
svc_xprt_free+0x1e2/0x350 [sunrpc]
svc_xprt_destroy_all+0x25a/0x440 [sunrpc]
nfsd_put+0x125/0x240 [nfsd]
nfsd_svc+0x2cb/0x3c0 [nfsd]
write_threads+0x1ac/0x2a0 [nfsd]
nfsctl_transaction_write+0xac/0x110 [nfsd]
vfs_write+0x1c3/0xae0
ksys_write+0xed/0x1c0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
Fix the UAF by simply doing nothing in svc_tcp_listen_data_ready()
if state != TCP_LISTEN, that will avoid dereferencing svsk for all
child socket.
Link: https://lore.kernel.org/lkml/20230507091131.23540-1-dinghui@sangfor.com.cn/
Fixes: fa9251afc3 ("SUNRPC: Call the default socket callbacks instead of open coding")
Signed-off-by: Ding Hui <dinghui@sangfor.com.cn>
Cc: <stable@vger.kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
- Two minor bug fixes
-----BEGIN PGP SIGNATURE-----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=2AMA
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Two minor bug fixes
* tag 'nfsd-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: fix double fget() bug in __write_ports_addfd()
nfsd: make a copy of struct iattr before calling notify_change
The bug here is that you cannot rely on getting the same socket
from multiple calls to fget() because userspace can influence
that. This is a kind of double fetch bug.
The fix is to delete the svc_alien_sock() function and instead do
the checking inside the svc_addsock() function.
Fixes: 3064639423 ("nfsd: check passed socket's net matches NFSd superblock's one")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: NeilBrown <neilb@suse.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Stable Fix:
* Don't change task->tk_status after the call to rpc_exit_task
Other Bugfixes:
* Convert kmap_atomic() to kmap_local_folio()
* Fix a potential double free with READ_PLUS
-----BEGIN PGP SIGNATURE-----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=6xFZ
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-6.4-2' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client fixes from Anna Schumaker:
"Stable Fix:
- Don't change task->tk_status after the call to rpc_exit_task
Other Bugfixes:
- Convert kmap_atomic() to kmap_local_folio()
- Fix a potential double free with READ_PLUS"
* tag 'nfs-for-6.4-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFSv4.2: Fix a potential double free with READ_PLUS
SUNRPC: Don't change task->tk_status after the call to rpc_exit_task
NFS: Convert kmap_atomic() to kmap_local_folio()
Some calls to rpc_exit_task() may deliberately change the value of
task->tk_status, for instance because it gets checked by the RPC call's
rpc_release() callback. That makes it wrong to reset the value to
task->tk_rpc_status.
In particular this causes a bug where the rpc_call_done() callback tries
to fail over a set of pNFS/flexfiles writes to a different IP address,
but the reset of task->tk_status causes nfs_commit_release_pages() to
immediately mark the file as having a fatal error.
Fixes: 39494194f9 ("SUNRPC: Fix races with rpc_killall_tasks()")
Cc: stable@vger.kernel.org # 6.1.x
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
- A collection of minor bug fixes
-----BEGIN PGP SIGNATURE-----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=PiNG
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- A collection of minor bug fixes
* tag 'nfsd-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
NFSD: Remove open coding of string copy
SUNRPC: Fix trace_svc_register() call site
SUNRPC: always free ctxt when freeing deferred request
SUNRPC: double free xprt_ctxt while still in use
SUNRPC: Fix error handling in svc_setup_socket()
SUNRPC: Fix encoding of accepted but unsuccessful RPC replies
lockd: define nlm_port_min,max with CONFIG_SYSCTL
nfsd: define exports_proc_ops with CONFIG_PROC_FS
SUNRPC: Avoid relying on crypto API to derive CBC-CTS output IV
The trace event recorded incorrect values for the registered family,
protocol, and port because the arguments are in the wrong order.
Fixes: b4af59328c ("SUNRPC: Trace server-side rpcbind registration events")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Since the ->xprt_ctxt pointer was added to svc_deferred_req, it has not
been sufficient to use kfree() to free a deferred request. We may need
to free the ctxt as well.
As freeing the ctxt is all that ->xpo_release_rqst() does, we repurpose
it to explicit do that even when the ctxt is not stored in an rqst.
So we now have ->xpo_release_ctxt() which is given an xprt and a ctxt,
which may have been taken either from an rqst or from a dreq. The
caller is now responsible for clearing that pointer after the call to
->xpo_release_ctxt.
We also clear dr->xprt_ctxt when the ctxt is moved into a new rqst when
revisiting a deferred request. This ensures there is only one pointer
to the ctxt, so the risk of double freeing in future is reduced. The
new code in svc_xprt_release which releases both the ctxt and any
rq_deferred depends on this.
Fixes: 773f91b2cf ("SUNRPC: Fix NFSD's request deferral on RDMA transports")
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
When an RPC request is deferred, the rq_xprt_ctxt pointer is moved out
of the svc_rqst into the svc_deferred_req.
When the deferred request is revisited, the pointer is copied into
the new svc_rqst - and also remains in the svc_deferred_req.
In the (rare?) case that the request is deferred a second time, the old
svc_deferred_req is reused - it still has all the correct content.
However in that case the rq_xprt_ctxt pointer is NOT cleared so that
when xpo_release_xprt is called, the ctxt is freed (UDP) or possible
added to a free list (RDMA).
When the deferred request is revisited for a second time, it will
reference this ctxt which may be invalid, and the free the object a
second time which is likely to oops.
So change svc_defer() to *always* clear rq_xprt_ctxt, and assert that
the value is now stored in the svc_deferred_req.
Fixes: 773f91b2cf ("SUNRPC: Fix NFSD's request deferral on RDMA transports")
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Dan points out that sock_alloc_file() releases @sock on error, but
so do all of svc_setup_socket's callers, resulting in a double-
release if sock_alloc_file() returns an error.
Rather than allocating a struct file for all new sockets, allocate
one only for sockets created during a TCP accept. For the moment,
those are the only ones that will ever be used with RPC-with-TLS.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: ae0d77708a ("SUNRPC: Ensure server-side sockets have a sock->file")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Scott reports SUNRPC self-test failures regarding the output IV on arm64
when using the SIMD accelerated implementation of AES in CBC mode with
ciphertext stealing ("cts(cbc(aes))" in crypto API speak).
These failures are the result of the fact that, while RFC 3962 does
specify what the output IV should be and includes test vectors for it,
the general concept of an output IV is poorly defined, and generally,
not specified by the various algorithms implemented by the crypto API.
Only algorithms that support transparent chaining (e.g., CBC mode on a
block boundary) have requirements on the output IV, but ciphertext
stealing (CTS) is fundamentally about how to encapsulate CBC in a way
where the length of the entire message may not be an integral multiple
of the cipher block size, and the concept of an output IV does not exist
here because it has no defined purpose past the end of the message.
The generic CTS template takes advantage of this chaining capability of
the CBC implementations, and as a result, happens to return an output
IV, simply because it passes its IV buffer directly to the encapsulated
CBC implementation, which operates on full blocks only, and always
returns an IV. This output IV happens to match how RFC 3962 defines it,
even though the CTS template itself does not contain any output IV logic
whatsoever, and, for this reason, lacks any test vectors that exercise
this accidental output IV generation.
The arm64 SIMD implementation of cts(cbc(aes)) does not use the generic
CTS template at all, but instead, implements the CBC mode and ciphertext
stealing directly, and therefore does not encapsule a CBC implementation
that returns an output IV in the same way. The arm64 SIMD implementation
complies with the specification and passes all internal tests, but when
invoked by the SUNRPC code, fails to produce the expected output IV and
causes its selftests to fail.
Given that the output IV is defined as the penultimate block (where the
final block may smaller than the block size), we can quite easily derive
it in the caller by copying the appropriate slice of ciphertext after
encryption.
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Jeff Layton <jlayton@kernel.org>
Reported-by: Scott Mayhew <smayhew@redhat.com>
Tested-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The big ticket item for this release is support for RPC-with-TLS
[RFC 9289] has been added to the Linux NFS server. The goal is to
provide a simple-to-deploy, low-overhead in-transit confidentiality
and peer authentication mechanism. It can supplement NFS Kerberos
and it can protect the use of legacy non-cryptographic user
authentication flavors such as AUTH_SYS. The TLS Record protocol is
handled entirely by kTLS, meaning it can use either software
encryption or offload encryption to smart NICs.
Work continues on improving NFSD's open file cache. Among the many
clean-ups in that area is a patch to convert the rhashtable to use
the list-hashing version of that data structure.
-----BEGIN PGP SIGNATURE-----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=lA2+
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd updates from Chuck Lever:
"The big ticket item for this release is that support for RPC-with-TLS
[RFC 9289] has been added to the Linux NFS server.
The goal is to provide a simple-to-deploy, low-overhead in-transit
confidentiality and peer authentication mechanism. It can supplement
NFS Kerberos and it can protect the use of legacy non-cryptographic
user authentication flavors such as AUTH_SYS. The TLS Record protocol
is handled entirely by kTLS, meaning it can use either software
encryption or offload encryption to smart NICs.
Aside from that, work continues on improving NFSD's open file cache.
Among the many clean-ups in that area is a patch to convert the
rhashtable to use the list-hashing version of that data structure"
* tag 'nfsd-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (31 commits)
NFSD: Handle new xprtsec= export option
SUNRPC: Support TLS handshake in the server-side TCP socket code
NFSD: Clean up xattr memory allocation flags
NFSD: Fix problem of COMMIT and NFS4ERR_DELAY in infinite loop
SUNRPC: Clear rq_xid when receiving a new RPC Call
SUNRPC: Recognize control messages in server-side TCP socket code
SUNRPC: Be even lazier about releasing pages
SUNRPC: Convert svc_xprt_release() to the release_pages() API
SUNRPC: Relocate svc_free_res_pages()
nfsd: simplify the delayed disposal list code
SUNRPC: Ignore return value of ->xpo_sendto
SUNRPC: Ensure server-side sockets have a sock->file
NFSD: Watch for rq_pages bounds checking errors in nfsd_splice_actor()
sunrpc: simplify two-level sysctl registration for svcrdma_parm_table
SUNRPC: return proper error from get_expiry()
lockd: add some client-side tracepoints
nfs: move nfs_fhandle_hash to common include file
lockd: server should unlock lock if client rejects the grant
lockd: fix races in client GRANTED_MSG wait logic
lockd: move struct nlm_wait to lockd.h
...
New Features:
* Convert the readdir path to use folios
* Convert the NFS fscache code to use netfs
Bugfixes and Cleanups:
* Always send a RECLAIM_COMPLETE after establishing a lease
* Simplify sysctl registrations and other cleanups
* Handle out-of-order write replies on NFS v3
* Have sunrpc call_bind_status use standard hard/soft task semantics
* Other minor cleanups
-----BEGIN PGP SIGNATURE-----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=gpBC
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-6.4-1' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client updates from Anna Schumaker:
"New Features:
- Convert the readdir path to use folios
- Convert the NFS fscache code to use netfs
Bugfixes and Cleanups:
- Always send a RECLAIM_COMPLETE after establishing a lease
- Simplify sysctl registrations and other cleanups
- Handle out-of-order write replies on NFS v3
- Have sunrpc call_bind_status use standard hard/soft task semantics
- Other minor cleanups"
* tag 'nfs-for-6.4-1' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFSv4.2: Rework scratch handling for READ_PLUS
NFS: Cleanup unused rpc_clnt variable
NFS: set varaiable nfs_netfs_debug_id storage-class-specifier to static
SUNRPC: remove the maximum number of retries in call_bind_status
NFS: Convert readdir page array functions to use a folio
NFS: Convert the readdir array-of-pages into an array-of-folios
NFSv3: handle out-of-order write replies.
NFS: Remove fscache specific trace points and NFS_INO_FSCACHE bit
NFS: Remove all NFSIOS_FSCACHE counters due to conversion to netfs API
NFS: Convert buffered read paths to use netfs when fscache is enabled
NFS: Configure support for netfs when NFS fscache is configured
NFS: Rename readpage_async_filler to nfs_read_add_folio
sunrpc: simplify one-level sysctl registration for debug_table
sunrpc: move sunrpc_table and proc routines above
sunrpc: simplify one-level sysctl registration for xs_tunables_table
sunrpc: simplify one-level sysctl registration for xr_tunables_table
nfs: simplify two-level sysctl registration for nfs_cb_sysctls
nfs: simplify two-level sysctl registration for nfs4_cb_sysctls
lockd: simplify two-level sysctl registration for nlm_sysctls
NFSv4.1: Always send a RECLAIM_COMPLETE after establishing lease
This patch adds opportunitistic RPC-with-TLS to the Linux in-kernel
NFS server. If the client requests RPC-with-TLS and the user space
handshake agent is running, the server will set up a TLS session.
There are no policy settings yet. For example, the server cannot
yet require the use of RPC-with-TLS to access its data.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
This is an eye-catcher for tracepoints that record the XID: it means
svc_rqst() has not received a full RPC Call with an XID yet.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
To support kTLS, the server-side TCP socket receive path needs to
watch for CMSGs.
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
A single RPC transaction that touches only a couple of pages means
rq_pvec will not be even close to full in svc_xpt_release(). This is
a common case.
Instead, just leave the pages in rq_pvec until it is completely
full. This improves the efficiency of the batch release mechanism
on workloads that involve small RPC messages.
The rq_pvec is also fully emptied just before thread exit.
Reviewed-by: Calum Mackay <calum.mackay@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Instead of invoking put_page() one-at-a-time, pass the "response"
portion of rq_pages directly to release_pages() to reduce the number
of times each nfsd thread invokes a page allocator API.
Since svc_xprt_release() is not invoked while a client is waiting
for an RPC Reply, this is not expected to directly impact mean
request latencies on a lightly or moderately loaded server. However
as workload intensity increases, I expect somewhat better
scalability: the same number of server threads should be able to
handle more work.
Reviewed-by: Calum Mackay <calum.mackay@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Clean-up: There doesn't seem to be a reason why this function is
stuck in a header. One thing it prevents is the convenient addition
of tracing. Moving it to a source file also makes the rq_respages
clean-up logic easier to find.
Reviewed-by: Calum Mackay <calum.mackay@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Clean up: All callers of svc_process() ignore its return value, so
svc_process() can safely be converted to return void. Ditto for
svc_send().
The return value of ->xpo_sendto() is now used only as part of a
trace event.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The TLS handshake upcall mechanism requires a non-NULL sock->file on
the socket it hands to user space. svc_sock_free() already releases
sock->file properly if one exists.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
There have been several bugs over the years where the NFSD splice
actor has attempted to write outside the rq_pages array.
This is a "should never happen" condition, but if for some reason
the pipe splice actor should attempt to walk past the end of
rq_pages, it needs to terminate the READ operation to prevent
corruption of the pointer addresses in the fields just beyond the
array.
A server crash is thus prevented. Since the code is not behaving,
the READ operation returns -EIO to the client. None of the READ
payload data can be trusted if the splice actor isn't operating as
expected.
Suggested-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
There is no need to declare two tables to just create directories,
this can be easily be done with a prefix path with register_sysctl().
Simplify this registration.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The get_expiry() function currently returns a timestamp, and uses the
special return value of 0 to indicate an error.
Unfortunately this causes a problem when 0 is the correct return value.
On a system with no RTC it is possible that the boot time will be seen
to be "3". When exportfs probes to see if a particular filesystem
supports NFS export it tries to cache information with an expiry time of
"3". The intention is for this to be "long in the past". Even with no
RTC it will not be far in the future (at most a second or two) so this
is harmless.
But if the boot time happens to have been calculated to be "3", then
get_expiry will fail incorrectly as it converts the number to "seconds
since bootime" - 0.
To avoid this problem we change get_expiry() to report the error quite
separately from the expiry time. The error is now the return value.
The expiry time is reported through a by-reference parameter.
Reported-by: Jerry Zhang <jerry@skydio.com>
Tested-by: Jerry Zhang <jerry@skydio.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Currently call_bind_status places a hard limit of 3 to the number of
retries on EACCES error. This limit was done to prevent NLM unlock
requests from being hang forever when the server keeps returning garbage.
However this change causes problem for cases when NLM service takes
longer than 9 seconds to register with the port mapper after a restart.
This patch removes this hard coded limit and let the RPC handles
the retry based on the standard hard/soft task semantics.
Fixes: 0b760113a3 ("NLM: Don't hang forever on NLM unlock requests")
Reported-by: Helen Chao <helen.chao@oracle.com>
Tested-by: Helen Chao <helen.chao@oracle.com>
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
- Address two issues with the new GSS krb5 Kunit tests
-----BEGIN PGP SIGNATURE-----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=a/Wj
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.3-6' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Address two issues with the new GSS krb5 Kunit tests
* tag 'nfsd-6.3-6' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
SUNRPC: Fix failures of checksum Kunit tests
sunrpc: Fix RFC6803 encryption test
Scott reports that when the new GSS krb5 Kunit tests are built as
a separate module and loaded, the RFC 6803 and RFC 8009 checksum
tests all fail, even though they pass when run under kunit.py.
It appears that passing a buffer backed by static const memory to
gss_krb5_checksum() is a problem. A printk in checksum_case() shows
the correct plaintext, but by the time the buffer has been converted
to a scatterlist and arrives at checksummer(), it contains all
zeroes.
Replacing this buffer with one that is dynamically allocated fixes
the issue.
Reported-by: Scott Mayhew <smayhew@redhat.com>
Fixes: 02142b2ca8 ("SUNRPC: Add checksum KUnit tests for the RFC 6803 encryption types")
Tested-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The usage_data[] array in rfc6803_encrypt_case() is uninitialised, so clear
it as it may cause the tests to fail otherwise.
Fixes: b958cff6b2 ("SUNRPC: Add encryption KUnit tests for the RFC 6803 encryption types")
Link: https://lore.kernel.org/r/380323.1681314997@warthog.procyon.org.uk/
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Chuck Lever <chuck.lever@oracle.com>
cc: Scott Mayhew <smayhew@redhat.com>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: linux-nfs@vger.kernel.org
cc: linux-crypto@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
There is no need to declare an extra tables to just create directory,
this can be easily be done with a prefix path with register_sysctl().
Simplify this registration.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
No need to do a forward declaration for sunrpc_table, just move
the sysctls up as everyone else does it. This will make the next
change easier to read. This change produces no functional changes.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
There is no need to declare an extra tables to just create directory,
this can be easily be done with a prefix path with register_sysctl().
Simplify this registration.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
There is no need to declare an extra tables to just create directory,
this can be easily be done with a prefix path with register_sysctl().
Simplify this registration.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
- Fix a crash and a resource leak in NFSv4 COMPOUND processing
- Fix issues with AUTH_SYS credential handling
- Try again to address an NFS/NFSD/SUNRPC build dependency regression
-----BEGIN PGP SIGNATURE-----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=bk6S
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.3-5' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Fix a crash and a resource leak in NFSv4 COMPOUND processing
- Fix issues with AUTH_SYS credential handling
- Try again to address an NFS/NFSD/SUNRPC build dependency regression
* tag 'nfsd-6.3-5' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
NFSD: callback request does not use correct credential for AUTH_SYS
NFS: Remove "select RPCSEC_GSS_KRB5
sunrpc: only free unix grouplist after RCU settles
nfsd: call op_release, even when op_func returns an error
NFSD: Avoid calling OPDESC() with ops->opnum == OP_ILLEGAL
While the unix_gid object is rcu-freed, the group_info list that it
contains is not. Ensure that we only put the group list reference once
we are really freeing the unix_gid object.
Reported-by: Zhi Li <yieli@redhat.com>
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2183056
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Fixes: fd5d2f7826 ("SUNRPC: Make server side AUTH_UNIX use lockless lookups")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Bugfixes:
* Fix shutdown of NFS TCP client sockets
* Fix hangs when recovering open state after a server reboot
-----BEGIN PGP SIGNATURE-----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=S4il
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-6.3-3' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client fixes from Anna Schumaker:
- Fix shutdown of NFS TCP client sockets
- Fix hangs when recovering open state after a server reboot
* tag 'nfs-for-6.3-3' of git://git.linux-nfs.org/projects/anna/linux-nfs:
SUNRPC: fix shutdown of NFS TCP client socket
NFSv4: Fix hangs when recovering open state after a server reboot
- Fix a crash when using NFS with krb5p
-----BEGIN PGP SIGNATURE-----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=FHAt
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fix from Chuck Lever:
- Fix a crash when using NFS with krb5p
* tag 'nfsd-6.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
SUNRPC: Fix a crash in gss_krb5_checksum()
NFS server Duplicate Request Cache (DRC) algorithms rely on NFS clients
reconnecting using the same local TCP port. Unique NFS operations are
identified by the per-TCP connection set of XIDs. This prevents file
corruption when non-idempotent NFS operations are retried.
Currently, NFS client TCP connections are using different local TCP ports
when reconnecting to NFS servers.
After an NFS server initiates shutdown of the TCP connection, the NFS
client's TCP socket is set to NULL after the socket state has reached
TCP_LAST_ACK(9). When reconnecting, the new socket attempts to reuse
the same local port but fails with EADDRNOTAVAIL (99). This forces the
socket to use a different local TCP port to reconnect to the remote NFS
server.
State Transition and Events:
TCP_CLOSE_WAIT(8)
TCP_LAST_ACK(9)
connect(fail EADDRNOTAVAIL(99))
TCP_CLOSE(7)
bind on new port
connect success
dmesg excerpts showing reconnect switching from TCP local port of 926 to
763 after commit 7c81e6a9d7:
[13354.947854] NFS call mkdir testW
...
[13405.654781] RPC: xs_tcp_state_change client 00000000037d0f03...
[13405.654813] RPC: state 8 conn 1 dead 0 zapped 1 sk_shutdown 1
[13405.654826] RPC: xs_data_ready...
[13405.654892] RPC: xs_tcp_state_change client 00000000037d0f03...
[13405.654895] RPC: state 9 conn 0 dead 0 zapped 1 sk_shutdown 3
[13405.654899] RPC: xs_tcp_state_change client 00000000037d0f03...
[13405.654900] RPC: state 9 conn 0 dead 0 zapped 1 sk_shutdown 3
[13405.654950] RPC: xs_connect scheduled xprt 00000000037d0f03
[13405.654975] RPC: xs_bind 0.0.0.0:926: ok (0)
[13405.654980] RPC: worker connecting xprt 00000000037d0f03 via tcp
to 10.101.6.228 (port 2049)
[13405.654991] RPC: 00000000037d0f03 connect status 99 connected 0
sock state 7
[13405.655001] RPC: xs_tcp_state_change client 00000000037d0f03...
[13405.655002] RPC: state 7 conn 0 dead 0 zapped 1 sk_shutdown 3
[13405.655024] RPC: xs_connect scheduled xprt 00000000037d0f03
[13405.655038] RPC: xs_bind 0.0.0.0:763: ok (0)
[13405.655041] RPC: worker connecting xprt 00000000037d0f03 via tcp
to 10.101.6.228 (port 2049)
[13405.655065] RPC: 00000000037d0f03 connect status 115 connected 0
sock state 2
State Transition and Events with patch applied:
TCP_CLOSE_WAIT(8)
TCP_LAST_ACK(9)
TCP_CLOSE(7)
connect(reuse of port succeeds)
dmesg excerpts showing reconnect on same TCP local port of 936 with patch
applied:
[ 257.139935] NFS: mkdir(0:59/560857152), testQ
[ 257.139937] NFS call mkdir testQ
...
[ 307.822702] RPC: state 8 conn 1 dead 0 zapped 1 sk_shutdown 1
[ 307.822714] RPC: xs_data_ready...
[ 307.822817] RPC: xs_tcp_state_change client 00000000ce702f14...
[ 307.822821] RPC: state 9 conn 0 dead 0 zapped 1 sk_shutdown 3
[ 307.822825] RPC: xs_tcp_state_change client 00000000ce702f14...
[ 307.822826] RPC: state 9 conn 0 dead 0 zapped 1 sk_shutdown 3
[ 307.823606] RPC: xs_tcp_state_change client 00000000ce702f14...
[ 307.823609] RPC: state 7 conn 0 dead 0 zapped 1 sk_shutdown 3
[ 307.823629] RPC: xs_tcp_state_change client 00000000ce702f14...
[ 307.823632] RPC: state 7 conn 0 dead 0 zapped 1 sk_shutdown 3
[ 307.823676] RPC: xs_connect scheduled xprt 00000000ce702f14
[ 307.823704] RPC: xs_bind 0.0.0.0:936: ok (0)
[ 307.823709] RPC: worker connecting xprt 00000000ce702f14 via tcp
to 10.101.1.30 (port 2049)
[ 307.823748] RPC: 00000000ce702f14 connect status 115 connected 0
sock state 2
...
[ 314.916193] RPC: state 7 conn 0 dead 0 zapped 1 sk_shutdown 3
[ 314.916251] RPC: xs_connect scheduled xprt 00000000ce702f14
[ 314.916282] RPC: xs_bind 0.0.0.0:936: ok (0)
[ 314.916292] RPC: worker connecting xprt 00000000ce702f14 via tcp
to 10.101.1.30 (port 2049)
[ 314.916342] RPC: 00000000ce702f14 connect status 115 connected 0
sock state 2
Fixes: 7c81e6a9d7 ("SUNRPC: Tweak TCP socket shutdown in the RPC client")
Signed-off-by: Siddharth Rajendra Kawar <sikawar@microsoft.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Anna says:
> KASAN reports [...] a slab-out-of-bounds in gss_krb5_checksum(),
> and it can cause my client to panic when running cthon basic
> tests with krb5p.
> Running faddr2line gives me:
>
> gss_krb5_checksum+0x4b6/0x630:
> ahash_request_free at
> /home/anna/Programs/linux-nfs.git/./include/crypto/hash.h:619
> (inlined by) gss_krb5_checksum at
> /home/anna/Programs/linux-nfs.git/net/sunrpc/auth_gss/gss_krb5_crypto.c:358
My diagnosis is that the memcpy() at the end of gss_krb5_checksum()
reads past the end of the buffer containing the checksum data
because the callers have ignored gss_krb5_checksum()'s API contract:
* Caller provides the truncation length of the output token (h) in
* cksumout.len.
Instead they provide the fixed length of the hmac buffer. This
length happens to be larger than the value returned by
crypto_ahash_digestsize().
Change these errant callers to work like krb5_etm_{en,de}crypt().
As a defensive measure, bound the length of the byte copy at the
end of gss_krb5_checksum().
Kunit sez:
Testing complete. Ran 68 tests: passed: 68
Elapsed time: 81.680s total, 5.875s configuring, 75.610s building, 0.103s running
Reported-by: Anna Schumaker <schumaker.anna@gmail.com>
Fixes: 8270dbfceb ("SUNRPC: Obscure Kerberos integrity keys")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
- Protect NFSD writes against filesystem freezing
- Fix a potential memory leak during server shutdown
-----BEGIN PGP SIGNATURE-----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=z6NN
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Protect NFSD writes against filesystem freezing
- Fix a potential memory leak during server shutdown
* tag 'nfsd-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
SUNRPC: Fix a server shutdown leak
NFSD: Protect against filesystem freezing
Fix a race where kthread_stop() may prevent the threadfn from ever getting
called. If that happens the svc_rqst will not be cleaned up.
Fixes: ed6473ddc7 ("NFSv4: Fix callback server shutdown")
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
- Make new GSS Kerberos Kunit tests work on non-x86 platforms
-----BEGIN PGP SIGNATURE-----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=SoeB
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fix from Chuck Lever:
- Make new GSS Kerberos Kunit tests work on non-x86 platforms
* tag 'nfsd-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
SUNRPC: Properly terminate test case arrays
SUNRPC: Let Kunit tests run with some enctypes compiled out
Unable to handle kernel paging request at virtual address 73657420 when execute
[73657420] *pgd=00000000
Internal error: Oops: 80000005 [#1] ARM
CPU: 0 PID: 1 Comm: swapper Tainted: G N 6.2.0-rc7-00133-g373f26a81164-dirty #9
Hardware name: Generic DT based system
PC is at 0x73657420
LR is at kunit_run_tests+0x3e0/0x5f4
On x86 with GCC 12, the missing array terminators did not seem to
matter. Other platforms appear to be more picky.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Allow the new GSS Kerberos encryption type test suites to run
outside of the kunit infrastructure. Replace the assertion that
fires when lookup_enctype() so that the case is skipped instead of
failing outright.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
New Features:
* Convert the read and write paths to use folios
Bugfixes and Cleanups:
* Fix tracepoint state manager flag printing
* Fix disabling swap files
* Fix NFSv4 client identifier sysfs path in the documentation
* Don't clear NFS_CAP_COPY if server returns NFS4ERR_OFFLOAD_DENIED
* Treat GETDEVICEINFO errors as a layout failure
* Replace kmap_atomic() calls with kmap_local_page()
* Constify sunrpc sysfs kobj_type structures
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEnZ5MQTpR7cLU7KEp18tUv7ClQOsFAmP2lSQACgkQ18tUv7Cl
QOuaPw//TNLuEMiiMtM6EXFPc2p2tNMfM+EeMjYKZkS5WnvszVOZRzQfXz4dvvif
R2BIHT+C6AWkPOxnbuhIk86acy/wRuAPD9OMyp+3PNa4oEqjyIk5QaTvgYeeRBNe
H7haAqCiEBx/g8F9DladWLAwpilTSPpupdmiXwTS7Q7wB6NkKqc1eAJ+BTuRYAsm
19p2nGTzenWrut4HMOOmuAVrA2OcWtzgYzdJlY19lWRmzfCvX1gh3i2JxGutmnl3
tduviVBdu5QGnTKHJiP853kzs3VwEHIFSO+5z137JWKTm3IgPxW/u3zf+ijmw22t
vjbtFAhb4+u5juchvVKyIX4lClPSKZincQ6dn9soOm7qJcxYWNm40DzxAF21GUAq
d4tp+zBoe9pfKxZrylp6YxIchLQYhU+dL0hhqbKzfOAFOg28k1JsJubl/wRvWKVe
LGbvFOrUYo8arPOKfxBWMf4HCouu/vGq/qng+U/Ppjw3h8gD32aniyP3qN9Fm1JA
rFAMKTnD4I3r3x1E4HX3icUMwil36zBr9cPglQBYD5DW54ConEW8e6hvQmjTdQHP
EgN9+PSYzYXuKR/Fij7BYOymUD9grT1+5hVaOPzlM4SY3jMy2novcQGoGiLVOd0t
PGQ5047qbESFD7VkW4GBAYftrSMLiU+l5KL3aN1JRtprxu6NaYA=
=39ue
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-6.3-1' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client updates from Anna Schumaker:
"New Features:
- Convert the read and write paths to use folios
Bugfixes and Cleanups:
- Fix tracepoint state manager flag printing
- Fix disabling swap files
- Fix NFSv4 client identifier sysfs path in the documentation
- Don't clear NFS_CAP_COPY if server returns NFS4ERR_OFFLOAD_DENIED
- Treat GETDEVICEINFO errors as a layout failure
- Replace kmap_atomic() calls with kmap_local_page()
- Constify sunrpc sysfs kobj_type structures"
* tag 'nfs-for-6.3-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (25 commits)
fs/nfs: Replace kmap_atomic() with kmap_local_page() in dir.c
pNFS/filelayout: treat GETDEVICEINFO errors as layout failure
Documentation: Fix sysfs path for the NFSv4 client identifier
nfs42: do not fail with EIO if ssc returns NFS4ERR_OFFLOAD_DENIED
NFS: fix disabling of swap
SUNRPC: make kobj_type structures constant
nfs4trace: fix state manager flag printing
NFS: Remove unnecessary check in nfs_read_folio()
NFS: Improve tracing of nfs_wb_folio()
NFS: Enable tracing of nfs_invalidate_folio() and nfs_launder_folio()
NFS: fix up nfs_release_folio() to try to release the page
NFS: Clean up O_DIRECT request allocation
NFS: Fix up nfs_vm_page_mkwrite() for folios
NFS: Convert nfs_write_begin/end to use folios
NFS: Remove unused function nfs_wb_page()
NFS: Convert buffered writes to use folios
NFS: Convert the function nfs_wb_page() to use folios
NFS: Convert buffered reads to use folios
NFS: Add a helper nfs_wb_folio()
NFS: Convert the remaining pagelist helper functions to support folios
...
Two significant security enhancements are part of this release:
* NFSD's RPC header encoding and decoding, including RPCSEC GSS
and gssproxy header parsing, has been overhauled to make it
more memory-safe.
* Support for Kerberos AES-SHA2-based encryption types has been
added for both the NFS client and server. This provides a clean
path for deprecating and removing insecure encryption types
based on DES and SHA-1. AES-SHA2 is also FIPS-140 compliant, so
that NFS with Kerberos may now be used on systems with fips
enabled.
In addition to these, NFSD is now able to handle crossing into an
auto-mounted mount point on an exported NFS mount. A number of
fixes have been made to NFSD's server-side copy implementation.
RPC metrics have been converted to per-CPU variables. This helps
reduce unnecessary cross-CPU and cross-node memory bus traffic,
and significantly reduces noise when KCSAN is enabled.
-----BEGIN PGP SIGNATURE-----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=ZG/7
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd updates from Chuck Lever:
"Two significant security enhancements are part of this release:
- NFSD's RPC header encoding and decoding, including RPCSEC GSS and
gssproxy header parsing, has been overhauled to make it more
memory-safe.
- Support for Kerberos AES-SHA2-based encryption types has been added
for both the NFS client and server. This provides a clean path for
deprecating and removing insecure encryption types based on DES and
SHA-1. AES-SHA2 is also FIPS-140 compliant, so that NFS with
Kerberos may now be used on systems with fips enabled.
In addition to these, NFSD is now able to handle crossing into an
auto-mounted mount point on an exported NFS mount. A number of fixes
have been made to NFSD's server-side copy implementation.
RPC metrics have been converted to per-CPU variables. This helps
reduce unnecessary cross-CPU and cross-node memory bus traffic, and
significantly reduces noise when KCSAN is enabled"
* tag 'nfsd-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (121 commits)
NFSD: Clean up nfsd_symlink()
NFSD: copy the whole verifier in nfsd_copy_write_verifier
nfsd: don't fsync nfsd_files on last close
SUNRPC: Fix occasional warning when destroying gss_krb5_enctypes
nfsd: fix courtesy client with deny mode handling in nfs4_upgrade_open
NFSD: fix problems with cleanup on errors in nfsd4_copy
nfsd: fix race to check ls_layouts
nfsd: don't hand out delegation on setuid files being opened for write
SUNRPC: Remove ->xpo_secure_port()
SUNRPC: Clean up the svc_xprt_flags() macro
nfsd: remove fs/nfsd/fault_inject.c
NFSD: fix leaked reference count of nfsd4_ssc_umount_item
nfsd: clean up potential nfsd_file refcount leaks in COPY codepath
nfsd: zero out pointers after putting nfsd_files on COPY setup error
SUNRPC: Fix whitespace damage in svcauth_unix.c
nfsd: eliminate __nfs4_get_fd
nfsd: add some kerneldoc comments for stateid preprocessing functions
nfsd: eliminate find_deleg_file_locked
nfsd: don't take nfsd4_copy ref for OP_OFFLOAD_STATUS
SUNRPC: Add encryption self-tests
...
Core
----
- Add dedicated kmem_cache for typical/small skb->head, avoid having
to access struct page at kfree time, and improve memory use.
- Introduce sysctl to set default RPS configuration for new netdevs.
- Define Netlink protocol specification format which can be used
to describe messages used by each family and auto-generate parsers.
Add tools for generating kernel data structures and uAPI headers.
- Expose all net/core sysctls inside netns.
- Remove 4s sleep in netpoll if carrier is instantly detected on boot.
- Add configurable limit of MDB entries per port, and port-vlan.
- Continue populating drop reasons throughout the stack.
- Retire a handful of legacy Qdiscs and classifiers.
Protocols
---------
- Support IPv4 big TCP (TSO frames larger than 64kB).
- Add IP_LOCAL_PORT_RANGE socket option, to control local port range
on socket by socket basis.
- Track and report in procfs number of MPTCP sockets used.
- Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP
path manager.
- IPv6: don't check net.ipv6.route.max_size and rely on garbage
collection to free memory (similarly to IPv4).
- Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
- ICMP: add per-rate limit counters.
- Add support for user scanning requests in ieee802154.
- Remove static WEP support.
- Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
reporting.
- WiFi 7 EHT channel puncturing support (client & AP).
BPF
---
- Add a rbtree data structure following the "next-gen data structure"
precedent set by recently added linked list, that is, by using
kfunc + kptr instead of adding a new BPF map type.
- Expose XDP hints via kfuncs with initial support for RX hash and
timestamp metadata.
- Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key
to better support decap on GRE tunnel devices not operating
in collect metadata.
- Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
- Remove the need for trace_printk_lock for bpf_trace_printk
and bpf_trace_vprintk helpers.
- Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case.
- Significantly reduce the search time for module symbols
by livepatch and BPF.
- Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs in
different time intervals.
- Add support for BPF trampoline on s390x and riscv64.
- Add capability to export the XDP features supported by the NIC.
- Add __bpf_kfunc tag for marking kernel functions as kfuncs.
- Add cgroup.memory=nobpf kernel parameter option to disable BPF
memory accounting for container environments.
Netfilter
---------
- Remove the CLUSTERIP target. It has been marked as obsolete
for years, and we still have WARN splats wrt. races of
the out-of-band /proc interface installed by this target.
- Add 'destroy' commands to nf_tables. They are identical to
the existing 'delete' commands, but do not return an error if
the referenced object (set, chain, rule...) did not exist.
Driver API
----------
- Improve cpumask_local_spread() locality to help NICs set the right
IRQ affinity on AMD platforms.
- Separate C22 and C45 MDIO bus transactions more clearly.
- Introduce new DCB table to control DSCP rewrite on egress.
- Support configuration of Physical Layer Collision Avoidance (PLCA)
Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
shared medium Ethernet.
- Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
preemption of low priority frames by high priority frames.
- Add support for controlling MACSec offload using netlink SET.
- Rework devlink instance refcounts to allow registration and
de-registration under the instance lock. Split the code into multiple
files, drop some of the unnecessarily granular locks and factor out
common parts of netlink operation handling.
- Add TX frame aggregation parameters (for USB drivers).
- Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
messages with notifications for debug.
- Allow offloading of UDP NEW connections via act_ct.
- Add support for per action HW stats in TC.
- Support hardware miss to TC action (continue processing in SW from
a specific point in the action chain).
- Warn if old Wireless Extension user space interface is used with
modern cfg80211/mac80211 drivers. Do not support Wireless Extensions
for Wi-Fi 7 devices at all. Everyone should switch to using nl80211
interface instead.
- Improve the CAN bit timing configuration. Use extack to return error
messages directly to user space, update the SJW handling, including
the definition of a new default value that will benefit CAN-FD
controllers, by increasing their oscillator tolerance.
New hardware / drivers
----------------------
- Ethernet:
- nVidia BlueField-3 support (control traffic driver)
- Ethernet support for imx93 SoCs
- Motorcomm yt8531 gigabit Ethernet PHY
- onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
- Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
- Amlogic gxl MDIO mux
- WiFi:
- RealTek RTL8188EU (rtl8xxxu)
- Qualcomm Wi-Fi 7 devices (ath12k)
- CAN:
- Renesas R-Car V4H
Drivers
-------
- Bluetooth:
- Set Per Platform Antenna Gain (PPAG) for Intel controllers.
- Ethernet NICs:
- Intel (1G, igc):
- support TSN / Qbv / packet scheduling features of i226 model
- Intel (100G, ice):
- use GNSS subsystem instead of TTY
- multi-buffer XDP support
- extend support for GPIO pins to E823 devices
- nVidia/Mellanox:
- update the shared buffer configuration on PFC commands
- implement PTP adjphase function for HW offset control
- TC support for Geneve and GRE with VF tunnel offload
- more efficient crypto key management method
- multi-port eswitch support
- Netronome/Corigine:
- add DCB IEEE support
- support IPsec offloading for NFP3800
- Freescale/NXP (enetc):
- enetc: support XDP_REDIRECT for XDP non-linear buffers
- enetc: improve reconfig, avoid link flap and waiting for idle
- enetc: support MAC Merge layer
- Other NICs:
- sfc/ef100: add basic devlink support for ef100
- ionic: rx_push mode operation (writing descriptors via MMIO)
- bnxt: use the auxiliary bus abstraction for RDMA
- r8169: disable ASPM and reset bus in case of tx timeout
- cpsw: support QSGMII mode for J721e CPSW9G
- cpts: support pulse-per-second output
- ngbe: add an mdio bus driver
- usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
- r8152: handle devices with FW with NCM support
- amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
- virtio-net: support multi buffer XDP
- virtio/vsock: replace virtio_vsock_pkt with sk_buff
- tsnep: XDP support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add support for latency TLV (in FW control messages)
- Microchip (sparx5):
- separate explicit and implicit traffic forwarding rules, make
the implicit rules always active
- add support for egress DSCP rewrite
- IS0 VCAP support (Ingress Classification)
- IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.)
- ES2 VCAP support (Egress Access Control)
- support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- add MAB (port auth) offload support
- enable PTP receive for mv88e6390
- NXP (ocelot):
- support MAC Merge layer
- support for the the vsc7512 internal copper phys
- Microchip:
- lan9303: convert to PHYLINK
- lan966x: support TC flower filter statistics
- lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
- lan937x: support Credit Based Shaper configuration
- ksz9477: support Energy Efficient Ethernet
- other:
- qca8k: convert to regmap read/write API, use bulk operations
- rswitch: Improve TX timestamp accuracy
- Intel WiFi (iwlwifi):
- EHT (Wi-Fi 7) rate reporting
- STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware.
- Qualcomm 802.11ax WiFi (ath11k):
- IPQ5018 support
- Fine Timing Measurement (FTM) responder role support
- channel 177 support
- MediaTek WiFi (mt76):
- per-PHY LED support
- mt7996: EHT (Wi-Fi 7) support
- Wireless Ethernet Dispatch (WED) reset support
- switch to using page pool allocator
- RealTek WiFi (rtw89):
- support new version of Bluetooth co-existance
- Mobile:
- rmnet: support TX aggregation.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=xXhC
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Add dedicated kmem_cache for typical/small skb->head, avoid having
to access struct page at kfree time, and improve memory use.
- Introduce sysctl to set default RPS configuration for new netdevs.
- Define Netlink protocol specification format which can be used to
describe messages used by each family and auto-generate parsers.
Add tools for generating kernel data structures and uAPI headers.
- Expose all net/core sysctls inside netns.
- Remove 4s sleep in netpoll if carrier is instantly detected on
boot.
- Add configurable limit of MDB entries per port, and port-vlan.
- Continue populating drop reasons throughout the stack.
- Retire a handful of legacy Qdiscs and classifiers.
Protocols:
- Support IPv4 big TCP (TSO frames larger than 64kB).
- Add IP_LOCAL_PORT_RANGE socket option, to control local port range
on socket by socket basis.
- Track and report in procfs number of MPTCP sockets used.
- Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
manager.
- IPv6: don't check net.ipv6.route.max_size and rely on garbage
collection to free memory (similarly to IPv4).
- Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
- ICMP: add per-rate limit counters.
- Add support for user scanning requests in ieee802154.
- Remove static WEP support.
- Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
reporting.
- WiFi 7 EHT channel puncturing support (client & AP).
BPF:
- Add a rbtree data structure following the "next-gen data structure"
precedent set by recently added linked list, that is, by using
kfunc + kptr instead of adding a new BPF map type.
- Expose XDP hints via kfuncs with initial support for RX hash and
timestamp metadata.
- Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
better support decap on GRE tunnel devices not operating in collect
metadata.
- Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
- Remove the need for trace_printk_lock for bpf_trace_printk and
bpf_trace_vprintk helpers.
- Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case.
- Significantly reduce the search time for module symbols by
livepatch and BPF.
- Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs in
different time intervals.
- Add support for BPF trampoline on s390x and riscv64.
- Add capability to export the XDP features supported by the NIC.
- Add __bpf_kfunc tag for marking kernel functions as kfuncs.
- Add cgroup.memory=nobpf kernel parameter option to disable BPF
memory accounting for container environments.
Netfilter:
- Remove the CLUSTERIP target. It has been marked as obsolete for
years, and we still have WARN splats wrt races of the out-of-band
/proc interface installed by this target.
- Add 'destroy' commands to nf_tables. They are identical to the
existing 'delete' commands, but do not return an error if the
referenced object (set, chain, rule...) did not exist.
Driver API:
- Improve cpumask_local_spread() locality to help NICs set the right
IRQ affinity on AMD platforms.
- Separate C22 and C45 MDIO bus transactions more clearly.
- Introduce new DCB table to control DSCP rewrite on egress.
- Support configuration of Physical Layer Collision Avoidance (PLCA)
Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
shared medium Ethernet.
- Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
preemption of low priority frames by high priority frames.
- Add support for controlling MACSec offload using netlink SET.
- Rework devlink instance refcounts to allow registration and
de-registration under the instance lock. Split the code into
multiple files, drop some of the unnecessarily granular locks and
factor out common parts of netlink operation handling.
- Add TX frame aggregation parameters (for USB drivers).
- Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
messages with notifications for debug.
- Allow offloading of UDP NEW connections via act_ct.
- Add support for per action HW stats in TC.
- Support hardware miss to TC action (continue processing in SW from
a specific point in the action chain).
- Warn if old Wireless Extension user space interface is used with
modern cfg80211/mac80211 drivers. Do not support Wireless
Extensions for Wi-Fi 7 devices at all. Everyone should switch to
using nl80211 interface instead.
- Improve the CAN bit timing configuration. Use extack to return
error messages directly to user space, update the SJW handling,
including the definition of a new default value that will benefit
CAN-FD controllers, by increasing their oscillator tolerance.
New hardware / drivers:
- Ethernet:
- nVidia BlueField-3 support (control traffic driver)
- Ethernet support for imx93 SoCs
- Motorcomm yt8531 gigabit Ethernet PHY
- onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
- Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
- Amlogic gxl MDIO mux
- WiFi:
- RealTek RTL8188EU (rtl8xxxu)
- Qualcomm Wi-Fi 7 devices (ath12k)
- CAN:
- Renesas R-Car V4H
Drivers:
- Bluetooth:
- Set Per Platform Antenna Gain (PPAG) for Intel controllers.
- Ethernet NICs:
- Intel (1G, igc):
- support TSN / Qbv / packet scheduling features of i226 model
- Intel (100G, ice):
- use GNSS subsystem instead of TTY
- multi-buffer XDP support
- extend support for GPIO pins to E823 devices
- nVidia/Mellanox:
- update the shared buffer configuration on PFC commands
- implement PTP adjphase function for HW offset control
- TC support for Geneve and GRE with VF tunnel offload
- more efficient crypto key management method
- multi-port eswitch support
- Netronome/Corigine:
- add DCB IEEE support
- support IPsec offloading for NFP3800
- Freescale/NXP (enetc):
- support XDP_REDIRECT for XDP non-linear buffers
- improve reconfig, avoid link flap and waiting for idle
- support MAC Merge layer
- Other NICs:
- sfc/ef100: add basic devlink support for ef100
- ionic: rx_push mode operation (writing descriptors via MMIO)
- bnxt: use the auxiliary bus abstraction for RDMA
- r8169: disable ASPM and reset bus in case of tx timeout
- cpsw: support QSGMII mode for J721e CPSW9G
- cpts: support pulse-per-second output
- ngbe: add an mdio bus driver
- usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
- r8152: handle devices with FW with NCM support
- amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
- virtio-net: support multi buffer XDP
- virtio/vsock: replace virtio_vsock_pkt with sk_buff
- tsnep: XDP support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add support for latency TLV (in FW control messages)
- Microchip (sparx5):
- separate explicit and implicit traffic forwarding rules, make
the implicit rules always active
- add support for egress DSCP rewrite
- IS0 VCAP support (Ingress Classification)
- IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
etc.)
- ES2 VCAP support (Egress Access Control)
- support for Per-Stream Filtering and Policing (802.1Q,
8.6.5.1)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- add MAB (port auth) offload support
- enable PTP receive for mv88e6390
- NXP (ocelot):
- support MAC Merge layer
- support for the the vsc7512 internal copper phys
- Microchip:
- lan9303: convert to PHYLINK
- lan966x: support TC flower filter statistics
- lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
- lan937x: support Credit Based Shaper configuration
- ksz9477: support Energy Efficient Ethernet
- other:
- qca8k: convert to regmap read/write API, use bulk operations
- rswitch: Improve TX timestamp accuracy
- Intel WiFi (iwlwifi):
- EHT (Wi-Fi 7) rate reporting
- STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware.
- Qualcomm 802.11ax WiFi (ath11k):
- IPQ5018 support
- Fine Timing Measurement (FTM) responder role support
- channel 177 support
- MediaTek WiFi (mt76):
- per-PHY LED support
- mt7996: EHT (Wi-Fi 7) support
- Wireless Ethernet Dispatch (WED) reset support
- switch to using page pool allocator
- RealTek WiFi (rtw89):
- support new version of Bluetooth co-existance
- Mobile:
- rmnet: support TX aggregation"
* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
page_pool: add a comment explaining the fragment counter usage
net: ethtool: fix __ethtool_dev_mm_supported() implementation
ethtool: pse-pd: Fix double word in comments
xsk: add linux/vmalloc.h to xsk.c
sefltests: netdevsim: wait for devlink instance after netns removal
selftest: fib_tests: Always cleanup before exit
net/mlx5e: Align IPsec ASO result memory to be as required by hardware
net/mlx5e: TC, Set CT miss to the specific ct action instance
net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
net/mlx5: Refactor tc miss handling to a single function
net/mlx5: Kconfig: Make tc offload depend on tc skb extension
net/sched: flower: Support hardware miss to tc action
net/sched: flower: Move filter handle initialization earlier
net/sched: cls_api: Support hardware miss to tc action
net/sched: Rename user cookie and act cookie
sfc: fix builds without CONFIG_RTC_LIB
sfc: clean up some inconsistent indentings
net/mlx4_en: Introduce flexible array to silence overflow warning
net: lan966x: Fix possible deadlock inside PTP
net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
...
I'm guessing that the warning fired because there's some code path
that is called on module unload where the gss_krb5_enctypes file
was never set up.
name 'gss_krb5_enctypes'
WARNING: CPU: 0 PID: 6187 at fs/proc/generic.c:712 remove_proc_entry+0x38d/0x460 fs/proc/generic.c:712
destroy_krb5_enctypes_proc_entry net/sunrpc/auth_gss/svcauth_gss.c:1543 [inline]
gss_svc_shutdown_net+0x7d/0x2b0 net/sunrpc/auth_gss/svcauth_gss.c:2120
ops_exit_list+0xb0/0x170 net/core/net_namespace.c:169
setup_net+0x9bd/0xe60 net/core/net_namespace.c:356
copy_net_ns+0x320/0x6b0 net/core/net_namespace.c:483
create_new_namespaces+0x3f6/0xb20 kernel/nsproxy.c:110
copy_namespaces+0x410/0x500 kernel/nsproxy.c:179
copy_process+0x311d/0x76b0 kernel/fork.c:2272
kernel_clone+0xeb/0x9a0 kernel/fork.c:2684
__do_sys_clone+0xba/0x100 kernel/fork.c:2825
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Reported-by: syzbot+04a8437497bcfb4afa95@syzkaller.appspotmail.com
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
There's no need for the cost of this extra virtual function call
during every RPC transaction: the RQ_SECURE bit can be set properly
in ->xpo_recvfrom() instead.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
With the KUnit infrastructure recently added, we are free to define
other unit tests particular to our implementation. As an example,
I've added a self-test that encrypts then decrypts a string, and
checks the result.
Tested-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Simo Sorce <simo@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
RFC 8009 provides sample encryption results. Add KUnit tests to
ensure our implementation derives the expected results for the
provided sample input.
I hate how large this test is, but using non-standard key usage
values means rfc8009_encrypt_case() can't simply reuse ->import_ctx
to allocate and key its ciphers; and the test provides its own
confounders, which means krb5_etm_encrypt() can't be used directly.
Tested-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Simo Sorce <simo@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
RFC 8009 provides sample checksum results. Add KUnit tests to ensure
our implementation derives the expected results for the provided
sample input.
Tested-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Simo Sorce <simo@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
RFC 8009 provides sample key derivation results, so Kunit tests are
added to ensure our implementation derives the expected keys for the
provided sample input.
Tested-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Simo Sorce <simo@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The Camellia enctypes use a new KDF, so add some tests to ensure it
is working properly.
Tested-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Add Kunit tests for ENCTYPE_AES128_CTS_HMAC_SHA1_96. The test
vectors come from RFC 3962 Appendix B.
Tested-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Simo Sorce <simo@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
RFC 3961 Appendix A provides tests for the KDF specified in that
document as well as other parts of Kerberos. The other three usage
scenarios in Section 10 are not implemented by the Linux kernel's
RPCSEC GSS Kerberos 5 mechanism, so tests are not added for those.
Tested-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Simo Sorce <simo@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
I plan to add KUnit tests that will need enctype profile
information. Export the enctype profile lookup function.
Tested-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Simo Sorce <simo@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The Kerberos RFCs provide test vectors to verify the operation of
an implementation. Introduce a KUnit test framework to exercise the
Linux kernel's implementation of Kerberos.
Start with test cases for the RFC 3961-defined n-fold function. The
sample vectors for that are found in RFC 3961 Section 10.
Run the GSS Kerberos 5 mechanism's unit tests with this command:
$ ./tools/testing/kunit/kunit.py run \
--kunitconfig ./net/sunrpc/.kunitconfig
Tested-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Simo Sorce <simo@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The goal is to leave only protocol-defined items in gss_krb5.h so
that it can be easily replaced by a generic header. Implementation
specific items are moved to the new internal header.
Tested-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Simo Sorce <simo@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Add the RFC 6803 encryption types to the string of integers that is
reported to gssd during upcalls. This enables gssd to utilize keys
with these encryption types when support for them is built into the
kernel.
Tested-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The Camellia enctypes use the KDF_FEEDBACK_CMAC Key Derivation
Function defined in RFC 6803 Section 3.
Tested-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
RFC 6803 defines two encryption types that use Camellia ciphers (RFC
3713) and CMAC digests. Implement support for those in SunRPC's GSS
Kerberos 5 mechanism.
There has not been an explicit request to support these enctypes.
However, this new set of enctypes provides a good alternative to the
AES-SHA1 enctypes that are to be deprecated at some point.
As this implementation is still a "beta", the default is to not
build it automatically.
Tested-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Add the RFC 8009 encryption types to the string of integers that is
reported to gssd during upcalls. This enables gssd to utilize keys
with these encryption types when support for them is built into the
kernel.
Link: https://bugzilla.linux-nfs.org/show_bug.cgi?id=400
Tested-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Simo Sorce <simo@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
RFC 8009 enctypes use different crypt formulae than previous
Kerberos 5 encryption types. Section 1 of RFC 8009 explains the
reason for this change:
> The new types conform to the framework specified in [RFC3961],
> but do not use the simplified profile, as the simplified profile
> is not compliant with modern cryptographic best practices such as
> calculating Message Authentication Codes (MACs) over ciphertext
> rather than plaintext.
Add new .encrypt and .decrypt functions to handle this variation.
The new approach described above is referred to as Encrypt-then-MAC
(or EtM). Hence the names of the new functions added here are
prefixed with "krb5_etm_".
A critical second difference with previous crypt formulae is that
the cipher state is included in the computed HMAC. Note however that
for RPCSEC, the initial cipher state is easy to compute on both
initiator and acceptor because it is always all zeroes.
Tested-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Simo Sorce <simo@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The RFC 8009 encryption types use a different key derivation
function than the RFC 3962 encryption types. The new key derivation
function is defined in Section 3 of RFC 8009.
Tested-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Simo Sorce <simo@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Fill in entries in the supported_gss_krb5_enctypes array for the
encryption types defined in RFC 8009. These new enctypes use the
SHA-256 and SHA-384 message digest algorithms (as defined in
FIPS-180) instead of the deprecated SHA-1 algorithm, and are thus
more secure.
Note that NIST has scheduled SHA-1 for deprecation:
https://www.nist.gov/news-events/news/2022/12/nist-retires-sha-1-cryptographic-algorithm
Thus these new encryption types are placed under a separate CONFIG
option to enable distributors to separately introduce support for
the AES-SHA2 enctypes and deprecate support for the current set of
AES-SHA1 encryption types as their user space allows.
As this implementation is still a "beta", the default is to not
build it automatically.
Tested-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Simo Sorce <simo@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cryptosystem profile enctypes all use cipher block chaining
with ciphertext steal (CBC-with-CTS). However enctypes that are
currently supported in the Linux kernel SunRPC implementation
use only the encrypt-&-MAC approach. The RFC 8009 enctypes use
encrypt-then-MAC, which performs encryption and checksumming in
a different order.
Refactor to make it possible to share the CBC with CTS encryption
and decryption mechanisms between e&M and etM enctypes.
Tested-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Simo Sorce <simo@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The aes256-cts-hmac-sha384-192 enctype specifies the length of its
checksum and integrity subkeys as 192 bits, but the length of its
encryption subkey (Ke) as 256 bits. Add new fields to struct
gss_krb5_enctype that specify the key lengths individually, and
where needed, use the correct new field instead of ->keylength.
Tested-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Simo Sorce <simo@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Although the Kerberos specs have always listed separate subkey
lengths, the Linux kernel's SunRPC GSS Kerberos enctype profiles
assume the base key and the derived keys have identical lengths.
The aes256-cts-hmac-sha384-192 enctype specifies the length of its
checksum and integrity subkeys as 192 bits, but the length of its
encryption subkey (Ke) as 256 bits.
To support that enctype, parametrize context_v2_alloc_cipher() so
that each of its call sites can pass in its desired key length. For
now it will be the same length as before (gk5e->keylength), but a
subsequent patch will change this.
Tested-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Simo Sorce <simo@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
De-duplicate some common code.
Tested-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Simo Sorce <simo@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
