One case was missed in the short IO retry handling, and that's hitting
-EAGAIN on a blocking attempt read (eg from io-wq context). This is a
problem on sockets that are marked as non-blocking when created, they
don't carry any REQ_F_NOWAIT information to help us terminate them
instead of perpetually retrying.
Fixes: 227c0c9673 ("io_uring: internally retry short reads")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There's a bit of confusion on the matching pairs of poll vs double poll,
depending on if the request is a pure poll (IORING_OP_POLL_ADD) or
poll driven retry.
Add io_poll_get_double() that returns the double poll waitqueue, if any,
and io_poll_get_single() that returns the original poll waitqueue. With
that, remove the argument to io_poll_remove_double().
Finally ensure that wait->private is cleared once the double poll handler
has run, so that remove knows it's already been seen.
Cc: stable@vger.kernel.org # v5.8
Reported-by: syzbot+7f617d4a9369028b8a2c@syzkaller.appspotmail.com
Fixes: 18bceab101 ("io_uring: allow POLL_ADD with double poll_wait() users")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We've had a few application cases of not handling short reads properly,
and it is understandable as short reads aren't really expected if the
application isn't doing non-blocking IO.
Now that we retain the iov_iter over retries, we can implement internal
retry pretty trivially. This ensures that we don't return a short read,
even for buffered reads on page cache conflicts.
Cleanup the deep nesting and hard to read nature of io_read() as well,
it's much more straight forward now to read and understand. Added a
few comments explaining the logic as well.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of maintaining (and setting/remembering) iov_iter size and
segment counts, just put the iov_iter in the async part of the IO
structure.
This is mostly a preparation patch for doing appropriate internal retries
for short reads, but it also cleans up the state handling nicely and
simplifies it quite a bit.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When a process exits, we cancel whatever requests it has pending that
are referencing the file table. However, if a link is holding a
reference, then we cannot find it by simply looking at the inflight
list.
Enable checking of the poll and timeout list to find the link, and
cancel it appropriately.
Cc: stable@vger.kernel.org
Reported-by: Josef <josef.grieb@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Check the ipt.error value, it must have been either cleared to zero or
set to another error than the default -EINVAL if we don't go through the
waitqueue proc addition. Just give up on poll at that point and return
failure, this will fallback to async work.
io_poll_add() doesn't suffer from this failure case, as it returns the
error value directly.
Cc: stable@vger.kernel.org # v5.7+
Reported-by: syzbot+a730016dc0bdce4f6ff5@syzkaller.appspotmail.com
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We're holding the request reference, but we need to go one higher
to ensure that the ctx remains valid after the request has finished.
If the ring is closed with pending task_work inflight, and the
given io_kiocb finishes sync during issue, then we need a reference
to the ring itself around the task_work execution cycle.
Cc: stable@vger.kernel.org # v5.7+
Reported-by: syzbot+9b260fc33297966f5a8e@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we're in the error path failing links and we have a link that has
grabbed a reference to the fs_struct, then we cannot safely drop our
reference to the table if we already hold the completion lock. This
adds a hardirq dependency to the fs_struct->lock, which it currently
doesn't have.
Defer the final cleanup and free of such requests to avoid adding this
dependency.
Reported-by: syzbot+ef4b654b49ed7ff049bf@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When we traverse into failing links or timeouts, we need to ensure we
propagate the REQ_F_COMP_LOCKED flag to ensure that we correctly signal
to the completion side that we already hold the completion lock.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
syszbot reports a scenario where we recurse on the completion lock
when flushing an overflow:
1 lock held by syz-executor287/6816:
#0: ffff888093cdb4d8 (&ctx->completion_lock){....}-{2:2}, at: io_cqring_overflow_flush+0xc6/0xab0 fs/io_uring.c:1333
stack backtrace:
CPU: 1 PID: 6816 Comm: syz-executor287 Not tainted 5.8.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1f0/0x31e lib/dump_stack.c:118
print_deadlock_bug kernel/locking/lockdep.c:2391 [inline]
check_deadlock kernel/locking/lockdep.c:2432 [inline]
validate_chain+0x69a4/0x88a0 kernel/locking/lockdep.c:3202
__lock_acquire+0x1161/0x2ab0 kernel/locking/lockdep.c:4426
lock_acquire+0x160/0x730 kernel/locking/lockdep.c:5005
__raw_spin_lock_irq include/linux/spinlock_api_smp.h:128 [inline]
_raw_spin_lock_irq+0x67/0x80 kernel/locking/spinlock.c:167
spin_lock_irq include/linux/spinlock.h:379 [inline]
io_queue_linked_timeout fs/io_uring.c:5928 [inline]
__io_queue_async_work fs/io_uring.c:1192 [inline]
__io_queue_deferred+0x36a/0x790 fs/io_uring.c:1237
io_cqring_overflow_flush+0x774/0xab0 fs/io_uring.c:1359
io_ring_ctx_wait_and_kill+0x2a1/0x570 fs/io_uring.c:7808
io_uring_release+0x59/0x70 fs/io_uring.c:7829
__fput+0x34f/0x7b0 fs/file_table.c:281
task_work_run+0x137/0x1c0 kernel/task_work.c:135
exit_task_work include/linux/task_work.h:25 [inline]
do_exit+0x5f3/0x1f20 kernel/exit.c:806
do_group_exit+0x161/0x2d0 kernel/exit.c:903
__do_sys_exit_group+0x13/0x20 kernel/exit.c:914
__se_sys_exit_group+0x10/0x10 kernel/exit.c:912
__x64_sys_exit_group+0x37/0x40 kernel/exit.c:912
do_syscall_64+0x31/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fix this by passing back the link from __io_queue_async_work(), and
then let the caller handle the queueing of the link. Take care to also
punt the submission reference put to the caller, as we're holding the
completion lock for the __io_queue_defer() case. Hence we need to mark
the io_kiocb appropriately for that case.
Reported-by: syzbot+996f91b6ec3812c48042@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
An earlier commit:
b7db41c9e0 ("io_uring: fix regression with always ignoring signals in io_cqring_wait()")
ensured that we didn't get stuck waiting for eventfd reads when it's
registered with the io_uring ring for event notification, but we still
have cases where the task can be waiting on other events in the kernel and
need a bigger nudge to make forward progress. Or the task could be in the
kernel and running, but on its way to blocking.
This means that TWA_RESUME cannot reliably be used to ensure we make
progress. Use TWA_SIGNAL unconditionally.
Cc: stable@vger.kernel.org # v5.7+
Reported-by: Josef <josef.grieb@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The tear down path will always unaccount the memory, so ensure that we
have accounted it before hitting any of them.
Reported-by: Tomáš Chaloupka <chalucha@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we hit an earlier error path in io_uring_create(), then we will have
accounted memory, but not set ctx->{sq,cq}_entries yet. Then when the
ring is torn down in error, we use those values to unaccount the memory.
Ensure we set the ctx entries before we're able to hit a potential error
path.
Cc: stable@vger.kernel.org
Reported-by: Tomáš Chaloupka <chalucha@gmail.com>
Tested-by: Tomáš Chaloupka <chalucha@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The retry based logic here isn't easy to follow unless you're already
familiar with how io_uring does task_work based retries. Add some
comments explaining the flow a little better.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since we don't do exclusive waits or wakeups, we know that the bit is
always going to be set. Kill the test. Also see commit:
2a9127fcf2 ("mm: rewrite wait_on_page_bit_common() logic")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=2vmy
-----END PGP SIGNATURE-----
Merge tag 'for-5.9/io_uring-20200802' of git://git.kernel.dk/linux-block
Pull io_uring updates from Jens Axboe:
"Lots of cleanups in here, hardening the code and/or making it easier
to read and fixing bugs, but a core feature/change too adding support
for real async buffered reads. With the latter in place, we just need
buffered write async support and we're done relying on kthreads for
the fast path. In detail:
- Cleanup how memory accounting is done on ring setup/free (Bijan)
- sq array offset calculation fixup (Dmitry)
- Consistently handle blocking off O_DIRECT submission path (me)
- Support proper async buffered reads, instead of relying on kthread
offload for that. This uses the page waitqueue to drive retries
from task_work, like we handle poll based retry. (me)
- IO completion optimizations (me)
- Fix race with accounting and ring fd install (me)
- Support EPOLLEXCLUSIVE (Jiufei)
- Get rid of the io_kiocb unionizing, made possible by shrinking
other bits (Pavel)
- Completion side cleanups (Pavel)
- Cleanup REQ_F_ flags handling, and kill off many of them (Pavel)
- Request environment grabbing cleanups (Pavel)
- File and socket read/write cleanups (Pavel)
- Improve kiocb_set_rw_flags() (Pavel)
- Tons of fixes and cleanups (Pavel)
- IORING_SQ_NEED_WAKEUP clear fix (Xiaoguang)"
* tag 'for-5.9/io_uring-20200802' of git://git.kernel.dk/linux-block: (127 commits)
io_uring: flip if handling after io_setup_async_rw
fs: optimise kiocb_set_rw_flags()
io_uring: don't touch 'ctx' after installing file descriptor
io_uring: get rid of atomic FAA for cq_timeouts
io_uring: consolidate *_check_overflow accounting
io_uring: fix stalled deferred requests
io_uring: fix racy overflow count reporting
io_uring: deduplicate __io_complete_rw()
io_uring: de-unionise io_kiocb
io-wq: update hash bits
io_uring: fix missing io_queue_linked_timeout()
io_uring: mark ->work uninitialised after cleanup
io_uring: deduplicate io_grab_files() calls
io_uring: don't do opcode prep twice
io_uring: clear IORING_SQ_NEED_WAKEUP after executing task works
io_uring: batch put_task_struct()
tasks: add put_task_struct_many()
io_uring: return locked and pinned page accounting
io_uring: don't miscount pinned memory
io_uring: don't open-code recv kbuf managment
...
As recently done with with send/recv, flip the if after
rw_verify_aread() in io_{read,write}() and tabulise left bits left.
This removes mispredicted by a compiler jump on the success/fast path.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
As soon as we install the file descriptor, we have to assume that it
can get arbitrarily closed. We currently account memory (and note that
we did) after installing the ring fd, which means that it could be a
potential use-after-free condition if the fd is closed right after
being installed, but before we fiddle with the ctx.
In fact, syzbot reported this exact scenario:
BUG: KASAN: use-after-free in io_account_mem fs/io_uring.c:7397 [inline]
BUG: KASAN: use-after-free in io_uring_create fs/io_uring.c:8369 [inline]
BUG: KASAN: use-after-free in io_uring_setup+0x2797/0x2910 fs/io_uring.c:8400
Read of size 1 at addr ffff888087a41044 by task syz-executor.5/18145
CPU: 0 PID: 18145 Comm: syz-executor.5 Not tainted 5.8.0-rc7-next-20200729-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x18f/0x20d lib/dump_stack.c:118
print_address_description.constprop.0.cold+0xae/0x497 mm/kasan/report.c:383
__kasan_report mm/kasan/report.c:513 [inline]
kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530
io_account_mem fs/io_uring.c:7397 [inline]
io_uring_create fs/io_uring.c:8369 [inline]
io_uring_setup+0x2797/0x2910 fs/io_uring.c:8400
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x45c429
Code: 8d b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 5b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f8f121d0c78 EFLAGS: 00000246 ORIG_RAX: 00000000000001a9
RAX: ffffffffffffffda RBX: 0000000000008540 RCX: 000000000045c429
RDX: 0000000000000000 RSI: 0000000020000040 RDI: 0000000000000196
RBP: 000000000078bf38 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 000000000078bf0c
R13: 00007fff86698cff R14: 00007f8f121d19c0 R15: 000000000078bf0c
Move the accounting of the ring used locked memory before we get and
install the ring file descriptor.
Cc: stable@vger.kernel.org
Reported-by: syzbot+9d46305e76057f30c74e@syzkaller.appspotmail.com
Fixes: 309758254e ("io_uring: report pinned memory usage")
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If ->cq_timeouts modifications are done under ->completion_lock, we
don't really nee any fetch-and-add and other complex atomics. Replace it
with non-atomic FAA, that saves an implicit full memory barrier.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a helper to mark ctx->{cq,sq}_check_overflow to get rid of
duplicates, and it's clearer to check cq_overflow_list directly anyway.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Always do io_commit_cqring() after completing a request, even if it was
accounted as overflowed on the CQ side. Failing to do that may lead to
not to pushing deferred requests when needed, and so stalling the whole
ring.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
All ->cq_overflow modifications should be under completion_lock,
otherwise it can report a wrong number to the userspace. Fix it in
io_uring_cancel_files().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Call __io_complete_rw() in io_iopoll_queue() instead of hand coding it.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
As io_kiocb have enough space, move ->work out of a union. It's safer
this way and removes ->work memcpy bouncing.
By the way make tabulation in struct io_kiocb consistent.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Whoever called io_prep_linked_timeout() should also do
io_queue_linked_timeout(). __io_queue_sqe() doesn't follow that for the
punting path leaving linked timeouts prepared but never queued.
Fixes: 6df1db6b54 ("io_uring: fix mis-refcounting linked timeouts")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove REQ_F_WORK_INITIALIZED after io_req_clean_work(). That's a cold
path but is safer for those using io_req_clean_work() out of
*dismantle_req()/*io_free(). And for the same reason zero work.fs
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move io_req_init_async() into io_grab_files(), it's safer this way. Note
that io_queue_async_work() does *init_async(), so it's valid to move out
of __io_queue_sqe() punt path. Also, add a helper around io_grab_files().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Calling into opcode prep handlers may be dangerous, as they re-read
SQE but might not re-initialise requests completely. If io_req_defer()
passed fast checks and is done with preparations, punt it async.
As all other cases are covered with nulling @sqe, this guarantees that
io_[opcode]_prep() are visited only once per request.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In io_sq_thread(), if there are task works to handle, current codes
will skip schedule() and go on polling sq again, but forget to clear
IORING_SQ_NEED_WAKEUP flag, fix this issue. Also add two helpers to
set and clear IORING_SQ_NEED_WAKEUP flag,
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
As every iopoll request have a task ref, it becomes expensive to put
them one by one, instead we can put several at once integrating that
into io_req_free_batch().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Locked and pinned memory accounting in io_{,un}account_mem() depends on
having ->sqo_mm, which is NULL after a recent change for non SQPOLL'ed
io_ring. That disables the accounting.
Return ->sqo_mm initialisation back, and do __io_sq_thread_acquire_mm()
based on IORING_SETUP_SQPOLL flag.
Fixes: 8eb06d7e8d ("io_uring: fix missing ->mm on exit")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_sqe_buffer_unregister() uses cxt->sqo_mm for memory accounting, but
io_ring_ctx_free() drops ->sqo_mm before leaving pinned_vm
over-accounted. Postpone mm cleanup for when it's not needed anymore.
Fixes: 309758254e ("io_uring: report pinned memory usage")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Don't implement fast path of kbuf freeing and management inlined into
io_recv{,msg}(), that's error prone and duplicates handling. Replace it
with a helper io_put_recv_kbuf(), which mimics io_put_rw_kbuf() in the
io_read/write().
This also keeps cflags calculation in one place, removing duplication
between rw and recv/send.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Extract a common helper for cleaning up a selected buffer, this will be
used shortly. By the way, correct cflags types to unsigned and, as kbufs
are anyway tracked by a flag, remove useless zeroing req->rw.addr.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move REQ_F_BUFFER_SELECT flag check out of io_recv_buffer_select(), and
do that in its call sites That saves us from double error checking and
possibly an extra function call.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_clean_op() may be skipped even if there is a selected io_buffer,
that's because *select_buffer() funcions never set REQ_F_NEED_CLEANUP.
Trigger io_clean_op() when REQ_F_BUFFER_SELECTED is set as well, and
and clear the flag if was freed out of it.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of returning error from io_recv(), go through generic cleanup
path, because it'll retain cflags for userspace. Do the same for
io_send() for consistency.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With the return on a bad socket, kmsg is always non-null by the end
of the function, prune left extra checks and initialisations.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Flip over "if (sock)" condition with return on error, the upper layer
will take care. That change will be handy later, but already removes
an extra jump from hot path.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, file refs in struct io_submit_state are tracked with 2 vars:
@has_refs -- how many refs were initially taken
@used_refs -- number of refs used
Replace it with a single variable counting how many refs left at the
current moment.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
RLIMIT_SIZE in needed only for execution from an io-wq context, hence
move all preparations from hot path to io-wq work setup.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Every call to io_req_defer_prep() is prepended with allocating ->io,
just do that in the function. And while we're at it, mark error paths
with unlikey and replace "if (ret < 0)" with "if (ret)".
There is only one change in the observable behaviour, that's instead of
killing the head request right away on error, it postpones it until the
link is assembled, that looks more preferable.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A switch in __io_clean_op() doesn't have default, it's pointless to list
opcodes that doesn't do any cleanup. Remove IORING_OP_OPEN* from there.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The only caller of io_req_work_grab_env() is io_prep_async_work(), and
they are both initialising req->work. Inline grab_env(), it's easier
to keep this way, moreover there already were bugs with misplacing
io_req_init_async().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
req->cflags is used only for defer-completion path, just use completion
data to store it. With the 4 bytes from the ->sequence patch and
compacting io_kiocb, this frees 8 bytes.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
req->sequence is used only for deferred (i.e. DRAIN) requests, but
initialised for every request. Remove req->sequence from io_kiocb
together with its initialisation in io_init_req().
Replace it with a new field in struct io_defer_entry, that will be
calculated only when needed in io_req_defer(), which is a slow path.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The only left user of req->list is DRAIN, hence instead of keeping a
separate per request list for it, do that with old fashion non-intrusive
lists allocated on demand. That's a really slow path, so that's OK.
This removes req->list and so sheds 16 bytes from io_kiocb.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of using shared req->list, hang timeouts up on their own list
entry. struct io_timeout have enough extra space for it, but if that
will be a problem ->inflight_entry can reused for that.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
