mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-15 00:04:15 +08:00
4e58543e7d
975 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
1f24458a10 |
TTY/Serial changes for 6.7-rc1
Here is the big set of tty/serial driver changes for 6.7-rc1. Included
in here are:
- console/vgacon cleanups and removals from Arnd
- tty core and n_tty cleanups from Jiri
- lots of 8250 driver updates and cleanups
- sc16is7xx serial driver updates
- dt binding updates
- first set of port lock wrapers from Thomas for the printk fixes
coming in future releases
- other small serial and tty core cleanups and updates
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZUTbaw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk9+gCeKdoRb8FDwGCO/GaoHwR4EzwQXhQAoKXZRmN5
LTtw9sbfGIiBdOTtgLPb
=6PJr
-----END PGP SIGNATURE-----
Merge tag 'tty-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty and serial updates from Greg KH:
"Here is the big set of tty/serial driver changes for 6.7-rc1. Included
in here are:
- console/vgacon cleanups and removals from Arnd
- tty core and n_tty cleanups from Jiri
- lots of 8250 driver updates and cleanups
- sc16is7xx serial driver updates
- dt binding updates
- first set of port lock wrapers from Thomas for the printk fixes
coming in future releases
- other small serial and tty core cleanups and updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (193 commits)
serdev: Replace custom code with device_match_acpi_handle()
serdev: Simplify devm_serdev_device_open() function
serdev: Make use of device_set_node()
tty: n_gsm: add copyright Siemens Mobility GmbH
tty: n_gsm: fix race condition in status line change on dead connections
serial: core: Fix runtime PM handling for pending tx
vgacon: fix mips/sibyte build regression
dt-bindings: serial: drop unsupported samsung bindings
tty: serial: samsung: drop earlycon support for unsupported platforms
tty: 8250: Add note for PX-835
tty: 8250: Fix IS-200 PCI ID comment
tty: 8250: Add Brainboxes Oxford Semiconductor-based quirks
tty: 8250: Add support for Intashield IX cards
tty: 8250: Add support for additional Brainboxes PX cards
tty: 8250: Fix up PX-803/PX-857
tty: 8250: Fix port count of PX-257
tty: 8250: Add support for Intashield IS-100
tty: 8250: Add support for Brainboxes UP cards
tty: 8250: Add support for additional Brainboxes UC cards
tty: 8250: Remove UC-257 and UC-431
...
|
||
Arnd Bergmann
|
a07b50d80a |
hyperv: avoid dependency on screen_info
The two hyperv framebuffer drivers (hyperv_fb or hyperv_drm_drv) access the global screen_info in order to take over from the sysfb framebuffer, which in turn could be handled by simplefb, simpledrm or efifb. Similarly, the vmbus_drv code marks the original EFI framebuffer as reserved, but this is not required if there is no sysfb. As a preparation for making screen_info itself more local to the sysfb helper code, add a compile-time conditional in all three files that relate to hyperv fb and just skip this code if there is no sysfb that needs to be unregistered. Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Helge Deller <deller@gmx.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20231009211845.3136536-9-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Joel Granados
|
a90d3c46c0 |
Drivers: hv: Remove now superfluous sentinel element from ctl_table array
This commit comes at the tail end of a greater effort to remove the empty elements at the end of the ctl_table arrays (sentinels) which will reduce the overall build time size of the kernel and run time memory bloat by ~64 bytes per sentinel (further information Link : https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/) Remove sentinel from hv_ctl_table Signed-off-by: Joel Granados <j.granados@samsung.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> |
||
|
Linus Torvalds
|
0b90c5637d |
hyperv-next for v6.6
-----BEGIN PGP SIGNATURE----- iQFHBAABCgAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmT0EE8THHdlaS5saXVA a2VybmVsLm9yZwAKCRB2FHBfkEGgXg5FCACGJ6n2ikhtRHAENHIVY/mTh+HbhO07 ERzjADfqKF43u1Nt9cslgT4MioqwLjQsAu/A0YcJgVxVSOtg7dnbDmurRAjrGT/3 iKqcVvnaiwSV44TkF8evpeMttZSOg29ImmpyQjoZJJvDMfpxleEK53nuKB9EsjKL Mz/0gSPoNc79bWF+85cVhgPnGIh9nBarxHqVsuWjMhc+UFhzjf9mOtk34qqPfJ1Q 4RsKGEjkVkeXoG6nGd6Gl/+8WoTpenOZQLchhInocY+k9FlAzW1Kr+ICLDx+Topw 8OJ6fv2rMDOejT9aOaA3/imf7LMer0xSUKb6N0sqQAQX8KzwcOYyKtQJ =rC/v -----END PGP SIGNATURE----- Merge tag 'hyperv-next-signed-20230902' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv updates from Wei Liu: - Support for SEV-SNP guests on Hyper-V (Tianyu Lan) - Support for TDX guests on Hyper-V (Dexuan Cui) - Use SBRM API in Hyper-V balloon driver (Mitchell Levy) - Avoid dereferencing ACPI root object handle in VMBus driver (Maciej Szmigiero) - A few misecllaneous fixes (Jiapeng Chong, Nathan Chancellor, Saurabh Sengar) * tag 'hyperv-next-signed-20230902' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (24 commits) x86/hyperv: Remove duplicate include x86/hyperv: Move the code in ivm.c around to avoid unnecessary ifdef's x86/hyperv: Remove hv_isolation_type_en_snp x86/hyperv: Use TDX GHCI to access some MSRs in a TDX VM with the paravisor Drivers: hv: vmbus: Bring the post_msg_page back for TDX VMs with the paravisor x86/hyperv: Introduce a global variable hyperv_paravisor_present Drivers: hv: vmbus: Support >64 VPs for a fully enlightened TDX/SNP VM x86/hyperv: Fix serial console interrupts for fully enlightened TDX guests Drivers: hv: vmbus: Support fully enlightened TDX guests x86/hyperv: Support hypercalls for fully enlightened TDX guests x86/hyperv: Add hv_isolation_type_tdx() to detect TDX guests x86/hyperv: Fix undefined reference to isolation_type_en_snp without CONFIG_HYPERV x86/hyperv: Add missing 'inline' to hv_snp_boot_ap() stub hv: hyperv.h: Replace one-element array with flexible-array member Drivers: hv: vmbus: Don't dereference ACPI root object handle x86/hyperv: Add hyperv-specific handling for VMMCALL under SEV-ES x86/hyperv: Add smp support for SEV-SNP guest clocksource: hyper-v: Mark hyperv tsc page unencrypted in sev-snp enlightened guest x86/hyperv: Use vmmcall to implement Hyper-V hypercall in sev-snp enlightened guest drivers: hv: Mark percpu hvcall input arg page unencrypted in SEV-SNP enlightened guest ... |
||
Dexuan Cui
|
e3131f1c81 |
x86/hyperv: Remove hv_isolation_type_en_snp
In ms_hyperv_init_platform(), do not distinguish between a SNP VM with the paravisor and a SNP VM without the paravisor. Replace hv_isolation_type_en_snp() with !ms_hyperv.paravisor_present && hv_isolation_type_snp(). The hv_isolation_type_en_snp() in drivers/hv/hv.c and drivers/hv/hv_common.c can be changed to hv_isolation_type_snp() since we know !ms_hyperv.paravisor_present is true there. Signed-off-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Reviewed-by: Tianyu Lan <tiala@microsoft.com> Signed-off-by: Wei Liu <wei.liu@kernel.org> Link: https://lore.kernel.org/r/20230824080712.30327-10-decui@microsoft.com |
||
|
Dexuan Cui
|
2337829504 |
Drivers: hv: vmbus: Bring the post_msg_page back for TDX VMs with the paravisor
The post_msg_page was removed in
commit
|
||
|
Dexuan Cui
|
d3a9d7e49d |
x86/hyperv: Introduce a global variable hyperv_paravisor_present
The new variable hyperv_paravisor_present is set only when the VM is a SNP/TDX VM with the paravisor running: see ms_hyperv_init_platform(). We introduce hyperv_paravisor_present because we can not use ms_hyperv.paravisor_present in arch/x86/include/asm/mshyperv.h: struct ms_hyperv_info is defined in include/asm-generic/mshyperv.h, which is included at the end of arch/x86/include/asm/mshyperv.h, but at the beginning of arch/x86/include/asm/mshyperv.h, we would already need to use struct ms_hyperv_info in hv_do_hypercall(). We use hyperv_paravisor_present only in include/asm-generic/mshyperv.h, and use ms_hyperv.paravisor_present elsewhere. In the future, we'll introduce a hypercall function structure for different VM types, and at boot time, the right function pointers would be written into the structure so that runtime testing of TDX vs. SNP vs. normal will be avoided and hyperv_paravisor_present will no longer be needed. Call hv_vtom_init() when it's a VBS VM or when ms_hyperv.paravisor_present is true, i.e. the VM is a SNP VM or TDX VM with the paravisor. Enhance hv_vtom_init() for a TDX VM with the paravisor. In hv_common_cpu_init(), don't decrypt the hyperv_pcpu_input_arg for a TDX VM with the paravisor, just like we don't decrypt the page for a SNP VM with the paravisor. Signed-off-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Tianyu Lan <tiala@microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Wei Liu <wei.liu@kernel.org> Link: https://lore.kernel.org/r/20230824080712.30327-7-decui@microsoft.com |
||
|
Dexuan Cui
|
cceb4e0810 |
Drivers: hv: vmbus: Support >64 VPs for a fully enlightened TDX/SNP VM
Don't set *this_cpu_ptr(hyperv_pcpu_input_arg) before the function set_memory_decrypted() returns, otherwise we run into this ticky issue: For a fully enlightened TDX/SNP VM, in hv_common_cpu_init(), *this_cpu_ptr(hyperv_pcpu_input_arg) is an encrypted page before the set_memory_decrypted() returns. When such a VM has more than 64 VPs, if the hyperv_pcpu_input_arg is not NULL, hv_common_cpu_init() -> set_memory_decrypted() -> ... -> cpa_flush() -> on_each_cpu() -> ... -> hv_send_ipi_mask() -> ... -> __send_ipi_mask_ex() tries to call hv_do_rep_hypercall() with the hyperv_pcpu_input_arg as the hypercall input page, which must be a decrypted page in such a VM, but the page is still encrypted at this point, and a fatal fault is triggered. Fix the issue by setting *this_cpu_ptr(hyperv_pcpu_input_arg) after set_memory_decrypted(): if the hyperv_pcpu_input_arg is NULL, __send_ipi_mask_ex() returns HV_STATUS_INVALID_PARAMETER immediately, and hv_send_ipi_mask() falls back to orig_apic.send_IPI_mask(), which can use x2apic_send_IPI_all(), which may be slightly slower than the hypercall but still works correctly in such a VM. Reviewed-by: Michael Kelley <mikelley@microsoft.com> Reviewed-by: Tianyu Lan <tiala@microsoft.com> Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Wei Liu <wei.liu@kernel.org> Link: https://lore.kernel.org/r/20230824080712.30327-6-decui@microsoft.com |
||
|
Dexuan Cui
|
68f2f2bc16 |
Drivers: hv: vmbus: Support fully enlightened TDX guests
Add Hyper-V specific code so that a fully enlightened TDX guest (i.e.
without the paravisor) can run on Hyper-V:
Don't use hv_vp_assist_page. Use GHCI instead.
Don't try to use the unsupported HV_REGISTER_CRASH_CTL.
Don't trust (use) Hyper-V's TLB-flushing hypercalls.
Don't use lazy EOI.
Share the SynIC Event/Message pages with the hypervisor.
Don't use the Hyper-V TSC page for now, because non-trivial work is
required to share the page with the hypervisor.
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230824080712.30327-4-decui@microsoft.com
|
||
|
Dexuan Cui
|
d6e0228d26 |
x86/hyperv: Support hypercalls for fully enlightened TDX guests
A fully enlightened TDX guest on Hyper-V (i.e. without the paravisor) only uses the GHCI call rather than hv_hypercall_pg. Do not initialize hypercall_pg for such a guest. In hv_common_cpu_init(), the hyperv_pcpu_input_arg page needs to be decrypted in such a guest. Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Reviewed-by: Tianyu Lan <tiala@microsoft.com> Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Wei Liu <wei.liu@kernel.org> Link: https://lore.kernel.org/r/20230824080712.30327-3-decui@microsoft.com |
||
|
Dexuan Cui
|
08e9d12077 |
x86/hyperv: Add hv_isolation_type_tdx() to detect TDX guests
No logic change to SNP/VBS guests. hv_isolation_type_tdx() will be used to instruct a TDX guest on Hyper-V to do some TDX-specific operations, e.g. for a fully enlightened TDX guest (i.e. without the paravisor), hv_do_hypercall() should use __tdx_hypercall() and such a guest on Hyper-V should handle the Hyper-V Event/Message/Monitor pages specially. Reviewed-by: Michael Kelley <mikelley@microsoft.com> Reviewed-by: Tianyu Lan <tiala@microsoft.com> Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Wei Liu <wei.liu@kernel.org> Link: https://lore.kernel.org/r/20230824080712.30327-2-decui@microsoft.com |
||
Maciej S. Szmigiero
|
78e04bbff8 |
Drivers: hv: vmbus: Don't dereference ACPI root object handle
Since the commit referenced in the Fixes: tag below the VMBus client driver
is walking the ACPI namespace up from the VMBus ACPI device to the ACPI
namespace root object trying to find Hyper-V MMIO ranges.
However, if it is not able to find them it ends trying to walk resources of
the ACPI namespace root object itself.
This object has all-ones handle, which causes a NULL pointer dereference
in the ACPI code (from dereferencing this pointer with an offset).
This in turn causes an oops on boot with VMBus host implementations that do
not provide Hyper-V MMIO ranges in their VMBus ACPI device or its
ancestors.
The QEMU VMBus implementation is an example of such implementation.
I guess providing these ranges is optional, since all tested Windows
versions seem to be able to use VMBus devices without them.
Fix this by explicitly terminating the lookup at the ACPI namespace root
object.
Note that Linux guests under KVM/QEMU do not use the Hyper-V PV interface
by default - they only do so if the KVM PV interface is missing or
disabled.
Example stack trace of such oops:
[ 3.710827] ? __die+0x1f/0x60
[ 3.715030] ? page_fault_oops+0x159/0x460
[ 3.716008] ? exc_page_fault+0x73/0x170
[ 3.716959] ? asm_exc_page_fault+0x22/0x30
[ 3.717957] ? acpi_ns_lookup+0x7a/0x4b0
[ 3.718898] ? acpi_ns_internalize_name+0x79/0xc0
[ 3.720018] acpi_ns_get_node_unlocked+0xb5/0xe0
[ 3.721120] ? acpi_ns_check_object_type+0xfe/0x200
[ 3.722285] ? acpi_rs_convert_aml_to_resource+0x37/0x6e0
[ 3.723559] ? down_timeout+0x3a/0x60
[ 3.724455] ? acpi_ns_get_node+0x3a/0x60
[ 3.725412] acpi_ns_get_node+0x3a/0x60
[ 3.726335] acpi_ns_evaluate+0x1c3/0x2c0
[ 3.727295] acpi_ut_evaluate_object+0x64/0x1b0
[ 3.728400] acpi_rs_get_method_data+0x2b/0x70
[ 3.729476] ? vmbus_platform_driver_probe+0x1d0/0x1d0 [hv_vmbus]
[ 3.730940] ? vmbus_platform_driver_probe+0x1d0/0x1d0 [hv_vmbus]
[ 3.732411] acpi_walk_resources+0x78/0xd0
[ 3.733398] vmbus_platform_driver_probe+0x9f/0x1d0 [hv_vmbus]
[ 3.734802] platform_probe+0x3d/0x90
[ 3.735684] really_probe+0x19b/0x400
[ 3.736570] ? __device_attach_driver+0x100/0x100
[ 3.737697] __driver_probe_device+0x78/0x160
[ 3.738746] driver_probe_device+0x1f/0x90
[ 3.739743] __driver_attach+0xc2/0x1b0
[ 3.740671] bus_for_each_dev+0x70/0xc0
[ 3.741601] bus_add_driver+0x10e/0x210
[ 3.742527] driver_register+0x55/0xf0
[ 3.744412] ? 0xffffffffc039a000
[ 3.745207] hv_acpi_init+0x3c/0x1000 [hv_vmbus]
Fixes:
|
||
Tianyu Lan
|
193061ea0a |
drivers: hv: Mark percpu hvcall input arg page unencrypted in SEV-SNP enlightened guest
Hypervisor needs to access input arg, VMBus synic event and message pages. Mark these pages unencrypted in the SEV-SNP guest and free them only if they have been marked encrypted successfully. Reviewed-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Tianyu Lan <tiala@microsoft.com> Signed-off-by: Wei Liu <wei.liu@kernel.org> Link: https://lore.kernel.org/r/20230818102919.1318039-5-ltykernel@gmail.com |
||
|
Tianyu Lan
|
8387ce06d7 |
x86/hyperv: Set Virtual Trust Level in VMBus init message
SEV-SNP guests on Hyper-V can run at multiple Virtual Trust Levels (VTL). During boot, get the VTL at which we're running using the GET_VP_REGISTERs hypercall, and save the value for future use. Then during VMBus initialization, set the VTL with the saved value as required in the VMBus init message. Reviewed-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Tianyu Lan <tiala@microsoft.com> Signed-off-by: Wei Liu <wei.liu@kernel.org> Link: https://lore.kernel.org/r/20230818102919.1318039-3-ltykernel@gmail.com |
||
|
Tianyu Lan
|
d6e2d65244 |
x86/hyperv: Add sev-snp enlightened guest static key
Introduce static key isolation_type_en_snp for enlightened sev-snp guest check. Reviewed-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Tianyu Lan <tiala@microsoft.com> Signed-off-by: Wei Liu <wei.liu@kernel.org> Link: https://lore.kernel.org/r/20230818102919.1318039-2-ltykernel@gmail.com |
||
Mitchell Levy
|
4f74fb30ea |
hv_balloon: Update the balloon driver to use the SBRM API
This patch is intended as a proof-of-concept for the new SBRM machinery[1]. For some brief background, the idea behind SBRM is using the __cleanup__ attribute to automatically unlock locks (or otherwise release resources) when they go out of scope, similar to C++ style RAII. This promises some benefits such as making code simpler (particularly where you have lots of goto fail; type constructs) as well as reducing the surface area for certain kinds of bugs. The changes in this patch should not result in any difference in how the code actually runs (i.e., it's purely an exercise in this new syntax sugar). In one instance SBRM was not appropriate, so I left that part alone, but all other locking/unlocking is handled automatically in this patch. [1] https://lore.kernel.org/all/20230626125726.GU4253@hirez.programming.kicks-ass.net/ Suggested-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: "Mitchell Levy (Microsoft)" <levymitchell0@gmail.com> Reviewed-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Wei Liu <wei.liu@kernel.org> Link: https://lore.kernel.org/r/20230807-sbrm-hyperv-v2-1-9d2ac15305bd@gmail.com |
||
Nischala Yelchuri
|
55e544e1a9 |
x86/hyperv: Improve code for referencing hyperv_pcpu_input_arg
Several places in code for Hyper-V reference the per-CPU variable hyperv_pcpu_input_arg. Older code uses a multi-line sequence to reference the variable, and usually includes a cast. Newer code does a much simpler direct assignment. The latter is preferable as the complexity of the older code is unnecessary. Update older code to use the simpler direct assignment. Signed-off-by: Nischala Yelchuri <niyelchu@linux.microsoft.com> Link: https://lore.kernel.org/r/1687286438-9421-1-git-send-email-niyelchu@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> |
||
Kameron Carr
|
a6fe043880 |
Drivers: hv: Change hv_free_hyperv_page() to take void * argument
Currently hv_free_hyperv_page() takes an unsigned long argument, which is inconsistent with the void * return value from the corresponding hv_alloc_hyperv_page() function and variants. This creates unnecessary extra casting. Change the hv_free_hyperv_page() argument type to void *. Also remove redundant casts from invocations of hv_alloc_hyperv_page() and variants. Signed-off-by: Kameron Carr <kameroncarr@linux.microsoft.com> Reviewed-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Dexuan Cui <decui@microsoft.com> Link: https://lore.kernel.org/r/1687558189-19734-1-git-send-email-kameroncarr@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> |
||
Michael Kelley
|
9636be85cc |
x86/hyperv: Fix hyperv_pcpu_input_arg handling when CPUs go online/offline
These commits |
||
|
Michael Kelley
|
320805ab61 |
Drivers: hv: vmbus: Fix vmbus_wait_for_unload() to scan present CPUs
vmbus_wait_for_unload() may be called in the panic path after other
CPUs are stopped. vmbus_wait_for_unload() currently loops through
online CPUs looking for the UNLOAD response message. But the values of
CONFIG_KEXEC_CORE and crash_kexec_post_notifiers affect the path used
to stop the other CPUs, and in one of the paths the stopped CPUs
are removed from cpu_online_mask. This removal happens in both
x86/x64 and arm64 architectures. In such a case, vmbus_wait_for_unload()
only checks the panic'ing CPU, and misses the UNLOAD response message
except when the panic'ing CPU is CPU 0. vmbus_wait_for_unload()
eventually times out, but only after waiting 100 seconds.
Fix this by looping through *present* CPUs in vmbus_wait_for_unload().
The cpu_present_mask is not modified by stopping the other CPUs in the
panic path, nor should it be.
Also, in a CoCo VM the synic_message_page is not allocated in
hv_synic_alloc(), but is set and cleared in hv_synic_enable_regs()
and hv_synic_disable_regs() such that it is set only when the CPU is
online. If not all present CPUs are online when vmbus_wait_for_unload()
is called, the synic_message_page might be NULL. Add a check for this.
Fixes:
|
||
|
Dexuan Cui
|
ec97e11298 |
Drivers: hv: vmbus: Call hv_synic_free() if hv_synic_alloc() fails
Commit |
||
|
Linus Torvalds
|
da46b58ff8 |
hyperv-next for v6.4
-----BEGIN PGP SIGNATURE----- iQFHBAABCgAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmRHJSgTHHdlaS5saXVA a2VybmVsLm9yZwAKCRB2FHBfkEGgXjSOCAClsmFmyP320yAB74vQer5cSzxbIpFW 3qt/P3D8zABn0UxjjmD8+LTHuyB+72KANU6qQ9No6zdYs8yaA1vGX8j8UglWWHuj fmaAD4DuZl+V+fmqDgHukgaPlhakmW0m5tJkR+TW3kCgnyrtvSWpXPoxUAe6CLvj Kb/SPl6ylHRWlIAEZ51gy0Ipqxjvs5vR/h9CWpTmRMuZvxdWUro2Cm82wJgzXPqq 3eLbAzB29kLFEIIUpba9a/rif1yrWgVFlfpuENFZ+HUYuR78wrPB9evhwuPvhXd2 +f+Wk0IXORAJo8h7aaMMIr6bd4Lyn98GPgmS5YSe92HRIqjBvtYs3Dq8 =F6+n -----END PGP SIGNATURE----- Merge tag 'hyperv-next-signed-20230424' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv updates from Wei Liu: - PCI passthrough for Hyper-V confidential VMs (Michael Kelley) - Hyper-V VTL mode support (Saurabh Sengar) - Move panic report initialization code earlier (Long Li) - Various improvements and bug fixes (Dexuan Cui and Michael Kelley) * tag 'hyperv-next-signed-20230424' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (22 commits) PCI: hv: Replace retarget_msi_interrupt_params with hyperv_pcpu_input_arg Drivers: hv: move panic report code from vmbus to hv early init code x86/hyperv: VTL support for Hyper-V Drivers: hv: Kconfig: Add HYPERV_VTL_MODE x86/hyperv: Make hv_get_nmi_reason public x86/hyperv: Add VTL specific structs and hypercalls x86/init: Make get/set_rtc_noop() public x86/hyperv: Exclude lazy TLB mode CPUs from enlightened TLB flushes x86/hyperv: Add callback filter to cpumask_to_vpset() Drivers: hv: vmbus: Remove the per-CPU post_msg_page clocksource: hyper-v: make sure Invariant-TSC is used if it is available PCI: hv: Enable PCI pass-thru devices in Confidential VMs Drivers: hv: Don't remap addresses that are above shared_gpa_boundary hv_netvsc: Remove second mapping of send and recv buffers Drivers: hv: vmbus: Remove second way of mapping ring buffers Drivers: hv: vmbus: Remove second mapping of VMBus monitor pages swiotlb: Remove bounce buffer remapping for Hyper-V Driver: VMBus: Add Devicetree support dt-bindings: bus: Add Hyper-V VMBus Drivers: hv: vmbus: Convert acpi_device to more generic platform_device ... |
||
|
Linus Torvalds
|
888d3c9f7f |
sysctl-6.4-rc1
This pull request goes with only a few sysctl moves from the kernel/sysctl.c file, the rest of the work has been put towards deprecating two API calls which incur recursion and prevent us from simplifying the registration process / saving memory per move. Most of the changes have been soaking on linux-next since v6.3-rc3. I've slowed down the kernel/sysctl.c moves due to Matthew Wilcox's feedback that we should see if we could *save* memory with these moves instead of incurring more memory. We currently incur more memory since when we move a syctl from kernel/sysclt.c out to its own file we end up having to add a new empty sysctl used to register it. To achieve saving memory we want to allow syctls to be passed without requiring the end element being empty, and just have our registration process rely on ARRAY_SIZE(). Without this, supporting both styles of sysctls would make the sysctl registration pretty brittle, hard to read and maintain as can be seen from Meng Tang's efforts to do just this [0]. Fortunately, in order to use ARRAY_SIZE() for all sysctl registrations also implies doing the work to deprecate two API calls which use recursion in order to support sysctl declarations with subdirectories. And so during this development cycle quite a bit of effort went into this deprecation effort. I've annotated the following two APIs are deprecated and in few kernel releases we should be good to remove them: * register_sysctl_table() * register_sysctl_paths() During this merge window we should be able to deprecate and unexport register_sysctl_paths(), we can probably do that towards the end of this merge window. Deprecating register_sysctl_table() will take a bit more time but this pull request goes with a few example of how to do this. As it turns out each of the conversions to move away from either of these two API calls *also* saves memory. And so long term, all these changes *will* prove to have saved a bit of memory on boot. The way I see it then is if remove a user of one deprecated call, it gives us enough savings to move one kernel/sysctl.c out from the generic arrays as we end up with about the same amount of bytes. Since deprecating register_sysctl_table() and register_sysctl_paths() does not require maintainer coordination except the final unexport you'll see quite a bit of these changes from other pull requests, I've just kept the stragglers after rc3. Most of these changes have been soaking on linux-next since around rc3. [0] https://lkml.kernel.org/r/ZAD+cpbrqlc5vmry@bombadil.infradead.org -----BEGIN PGP SIGNATURE----- iQJGBAABCgAwFiEENnNq2KuOejlQLZofziMdCjCSiKcFAmRHAjQSHG1jZ3JvZkBr ZXJuZWwub3JnAAoJEM4jHQowkoinTzgQAI/uKHKi0VlUR1l2Psl0XbseUVueuyj3 ZDxSJpbVUmsoDf2MlLjzB8mYE3ricnNTDbLr7qOyA6pXdM1N0mY5LQmRVRu8/ffd 2T1hQ5pl7YnJdWP5dPhcF9Y+jnu1tjX1MW5DS4fzllwK7FnD86HuIruGq52RAPS/ /FH+BD9eodLWWXk6A/o2GFqoWxPKQI0GLxEYWa7Hg7yt8E/3PQL9QsRzn8i6U+HW BrN/+G3YD1VCCzXu0UAeXnm+i1Z7CdvqNdZuSkvE3DObiZ5WpOS+/i7FrDB7zdiu zAbHaifHnDPtcK3w2ZodbLAAwEWD/mG4iwIjE2kgIMVYxBv7TFDBRREXAWYAevIT UUuZnWDQsGaWdjywrebaUycEfd6dytKyan0fTXgMFkcoWRjejhitfdM2iZDdQROg q453p4HqOw4vTrhy4ov4zOX7J3EFiBzpZdl+SmLqcXk+jbLVb/Q9snUWz1AFtHBl gHoP5bS82uVktGG3MsObjgTzYYMQjO9YGIrVuW1VP9uWs8WaoWx6M9FQJIIhtwE+ h6wG2s7CjuFWnS0/IxWmDOn91QyUn1w7ohiz9TuvYj/5GLSBpBDGCJHsNB5T2WS1 qbQRaZ2Kg3j9TeyWfXxdlxBx7bt3ni+J/IXDY0zom2sTpGHKl8D2g5AzmEXJDTpl kd7Z3gsmwhDh =0U0W -----END PGP SIGNATURE----- Merge tag 'sysctl-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux Pull sysctl updates from Luis Chamberlain: "This only does a few sysctl moves from the kernel/sysctl.c file, the rest of the work has been put towards deprecating two API calls which incur recursion and prevent us from simplifying the registration process / saving memory per move. Most of the changes have been soaking on linux-next since v6.3-rc3. I've slowed down the kernel/sysctl.c moves due to Matthew Wilcox's feedback that we should see if we could *save* memory with these moves instead of incurring more memory. We currently incur more memory since when we move a syctl from kernel/sysclt.c out to its own file we end up having to add a new empty sysctl used to register it. To achieve saving memory we want to allow syctls to be passed without requiring the end element being empty, and just have our registration process rely on ARRAY_SIZE(). Without this, supporting both styles of sysctls would make the sysctl registration pretty brittle, hard to read and maintain as can be seen from Meng Tang's efforts to do just this [0]. Fortunately, in order to use ARRAY_SIZE() for all sysctl registrations also implies doing the work to deprecate two API calls which use recursion in order to support sysctl declarations with subdirectories. And so during this development cycle quite a bit of effort went into this deprecation effort. I've annotated the following two APIs are deprecated and in few kernel releases we should be good to remove them: - register_sysctl_table() - register_sysctl_paths() During this merge window we should be able to deprecate and unexport register_sysctl_paths(), we can probably do that towards the end of this merge window. Deprecating register_sysctl_table() will take a bit more time but this pull request goes with a few example of how to do this. As it turns out each of the conversions to move away from either of these two API calls *also* saves memory. And so long term, all these changes *will* prove to have saved a bit of memory on boot. The way I see it then is if remove a user of one deprecated call, it gives us enough savings to move one kernel/sysctl.c out from the generic arrays as we end up with about the same amount of bytes. Since deprecating register_sysctl_table() and register_sysctl_paths() does not require maintainer coordination except the final unexport you'll see quite a bit of these changes from other pull requests, I've just kept the stragglers after rc3" Link: https://lkml.kernel.org/r/ZAD+cpbrqlc5vmry@bombadil.infradead.org [0] * tag 'sysctl-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (29 commits) fs: fix sysctls.c built mm: compaction: remove incorrect #ifdef checks mm: compaction: move compaction sysctl to its own file mm: memory-failure: Move memory failure sysctls to its own file arm: simplify two-level sysctl registration for ctl_isa_vars ia64: simplify one-level sysctl registration for kdump_ctl_table utsname: simplify one-level sysctl registration for uts_kern_table ntfs: simplfy one-level sysctl registration for ntfs_sysctls coda: simplify one-level sysctl registration for coda_table fs/cachefiles: simplify one-level sysctl registration for cachefiles_sysctls xfs: simplify two-level sysctl registration for xfs_table nfs: simplify two-level sysctl registration for nfs_cb_sysctls nfs: simplify two-level sysctl registration for nfs4_cb_sysctls lockd: simplify two-level sysctl registration for nlm_sysctls proc_sysctl: enhance documentation xen: simplify sysctl registration for balloon md: simplify sysctl registration hv: simplify sysctl registration scsi: simplify sysctl registration with register_sysctl() csky: simplify alignment sysctl registration ... |
||
|
Linus Torvalds
|
556eb8b791 |
Driver core changes for 6.4-rc1
Here is the large set of driver core changes for 6.4-rc1. Once again, a busy development cycle, with lots of changes happening in the driver core in the quest to be able to move "struct bus" and "struct class" into read-only memory, a task now complete with these changes. This will make the future rust interactions with the driver core more "provably correct" as well as providing more obvious lifetime rules for all busses and classes in the kernel. The changes required for this did touch many individual classes and busses as many callbacks were changed to take const * parameters instead. All of these changes have been submitted to the various subsystem maintainers, giving them plenty of time to review, and most of them actually did so. Other than those changes, included in here are a small set of other things: - kobject logging improvements - cacheinfo improvements and updates - obligatory fw_devlink updates and fixes - documentation updates - device property cleanups and const * changes - firwmare loader dependency fixes. All of these have been in linux-next for a while with no reported problems. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZEp7Sw8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ykitQCfamUHpxGcKOAGuLXMotXNakTEsxgAoIquENm5 LEGadNS38k5fs+73UaxV =7K4B -----END PGP SIGNATURE----- Merge tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the large set of driver core changes for 6.4-rc1. Once again, a busy development cycle, with lots of changes happening in the driver core in the quest to be able to move "struct bus" and "struct class" into read-only memory, a task now complete with these changes. This will make the future rust interactions with the driver core more "provably correct" as well as providing more obvious lifetime rules for all busses and classes in the kernel. The changes required for this did touch many individual classes and busses as many callbacks were changed to take const * parameters instead. All of these changes have been submitted to the various subsystem maintainers, giving them plenty of time to review, and most of them actually did so. Other than those changes, included in here are a small set of other things: - kobject logging improvements - cacheinfo improvements and updates - obligatory fw_devlink updates and fixes - documentation updates - device property cleanups and const * changes - firwmare loader dependency fixes. All of these have been in linux-next for a while with no reported problems" * tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits) device property: make device_property functions take const device * driver core: update comments in device_rename() driver core: Don't require dynamic_debug for initcall_debug probe timing firmware_loader: rework crypto dependencies firmware_loader: Strip off \n from customized path zram: fix up permission for the hot_add sysfs file cacheinfo: Add use_arch[|_cache]_info field/function arch_topology: Remove early cacheinfo error message if -ENOENT cacheinfo: Check cache properties are present in DT cacheinfo: Check sib_leaf in cache_leaves_are_shared() cacheinfo: Allow early level detection when DT/ACPI info is missing/broken cacheinfo: Add arm64 early level initializer implementation cacheinfo: Add arch specific early level initializer tty: make tty_class a static const structure driver core: class: remove struct class_interface * from callbacks driver core: class: mark the struct class in struct class_interface constant driver core: class: make class_register() take a const * driver core: class: mark class_release() as taking a const * driver core: remove incorrect comment for device_create* MIPS: vpe-cmp: remove module owner pointer from struct class usage. ... |
||
|
Linus Torvalds
|
bc1bb2a49b |
- Add the necessary glue so that the kernel can run as a confidential
SEV-SNP vTOM guest on Hyper-V. A vTOM guest basically splits the address space in two parts: encrypted and unencrypted. The use case being running unmodified guests on the Hyper-V confidential computing hypervisor - Double-buffer messages between the guest and the hardware PSP device so that no partial buffers are copied back'n'forth and thus potential message integrity and leak attacks are possible - Name the return value the sev-guest driver returns when the hw PSP device hasn't been called, explicitly - Cleanups -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmRGl8gACgkQEsHwGGHe VUoEDhAAiw4+2nZR7XUJ7pewlXG7AJJZsVIpzzcF6Gyymn0LFCyMnP7O3snmFqzz aik0q2LzWrmDQ3Nmmzul0wtdsuW7Nik6BP9oF3WnB911+gGbpXyNWZ8EhOPNzkUR 9D8Sp6f0xmqNE3YuzEpanufiDswgUxi++DRdmIRAs1TTh4bfUFWZcib1pdwoqSmR oS3UfVwVZ4Ee2Qm1f3n3XQ0FUpsjWeARPExUkLEvd8XeonTP+6aGAdggg9MnPcsl 3zpSmOpuZ6VQbDrHxo3BH9HFuIUOd6S9PO++b9F6WxNPGEMk7fHa7ahOA6HjhgVz 5Da3BN16OS9j64cZsYHMPsBcd+ja1YmvvZGypsY0d6X4d3M1zTPW+XeLbyb+VFBy SvA7z+JuxtLKVpju65sNiJWw8ZDTSu+eEYNDeeGLvAj3bxtclJjcPdMEPdzxmC5K eAhmRmiFuVM4nXMAR6cspVTsxvlTHFtd5gdm6RlRnvd7aV77Zl1CLzTy8IHTVpvI t7XTbtjEjYc0pI6cXXptHEOnBLjXUMPcqgGFgJYEauH6EvrxoWszUZD0tS3Hw80A K+Rwnc70ubq/PsgZcF4Ayer1j49z1NPfk5D4EA7/ChN6iNhQA8OqHT1UBrHAgqls 2UAwzE2sQZnjDvGZghlOtFIQUIhwue7m93DaRi19EOdKYxVjV6U= =ZAw9 -----END PGP SIGNATURE----- Merge tag 'x86_sev_for_v6.4_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 SEV updates from Borislav Petkov: - Add the necessary glue so that the kernel can run as a confidential SEV-SNP vTOM guest on Hyper-V. A vTOM guest basically splits the address space in two parts: encrypted and unencrypted. The use case being running unmodified guests on the Hyper-V confidential computing hypervisor - Double-buffer messages between the guest and the hardware PSP device so that no partial buffers are copied back'n'forth and thus potential message integrity and leak attacks are possible - Name the return value the sev-guest driver returns when the hw PSP device hasn't been called, explicitly - Cleanups * tag 'x86_sev_for_v6.4_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/hyperv: Change vTOM handling to use standard coco mechanisms init: Call mem_encrypt_init() after Hyper-V hypercall init is done x86/mm: Handle decryption/re-encryption of bss_decrypted consistently Drivers: hv: Explicitly request decrypted in vmap_pfn() calls x86/hyperv: Reorder code to facilitate future work x86/ioremap: Add hypervisor callback for private MMIO mapping in coco VM x86/sev: Change snp_guest_issue_request()'s fw_err argument virt/coco/sev-guest: Double-buffer messages crypto: ccp: Get rid of __sev_platform_init_locked()'s local function pointer crypto: ccp - Name -1 return value as SEV_RET_NO_FW_CALL |
||
Long Li
|
9c318a1d9b |
Drivers: hv: move panic report code from vmbus to hv early init code
The panic reporting code was added in commit
|
||
Saurabh Sengar
|
d01b9a9f2d |
Drivers: hv: Kconfig: Add HYPERV_VTL_MODE
Add HYPERV_VTL_MODE Kconfig flag for VTL mode. Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/1681192532-15460-5-git-send-email-ssengar@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> |
||
|
Dexuan Cui
|
9a6b1a170c |
Drivers: hv: vmbus: Remove the per-CPU post_msg_page
The post_msg_page was introduced in 2014 in commit |
||
|
Michael Kelley
|
2c6ba42168 |
PCI: hv: Enable PCI pass-thru devices in Confidential VMs
For PCI pass-thru devices in a Confidential VM, Hyper-V requires that PCI config space be accessed via hypercalls. In normal VMs, config space accesses are trapped to the Hyper-V host and emulated. But in a confidential VM, the host can't access guest memory to decode the instruction for emulation, so an explicit hypercall must be used. Add functions to make the new MMIO read and MMIO write hypercalls. Update the PCI config space access functions to use the hypercalls when such use is indicated by Hyper-V flags. Also, set the flag to allow the Hyper-V PCI driver to be loaded and used in a Confidential VM (a.k.a., "Isolation VM"). The driver has previously been hardened against a malicious Hyper-V host[1]. [1] https://lore.kernel.org/all/20220511223207.3386-2-parri.andrea@gmail.com/ Co-developed-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Michael Kelley <mikelley@microsoft.com> Reviewed-by: Boqun Feng <boqun.feng@gmail.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Link: https://lore.kernel.org/r/1679838727-87310-13-git-send-email-mikelley@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> |
||
|
Michael Kelley
|
6afd9dc1a4 |
Drivers: hv: Don't remap addresses that are above shared_gpa_boundary
With the vTOM bit now treated as a protection flag and not part of the physical address, avoid remapping physical addresses with vTOM set since technically such addresses aren't valid. Use ioremap_cache() instead of memremap() to ensure that the mapping provides decrypted access, which will correctly set the vTOM bit as a protection flag. While this change is not required for correctness with the current implementation of memremap(), for general code hygiene it's better to not depend on the mapping functions doing something reasonable with a physical address that is out-of-range. While here, fix typos in two error messages. Signed-off-by: Michael Kelley <mikelley@microsoft.com> Reviewed-by: Tianyu Lan <Tianyu.Lan@microsoft.com> Link: https://lore.kernel.org/r/1679838727-87310-12-git-send-email-mikelley@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> |
||
|
Michael Kelley
|
25727aaed6 |
hv_netvsc: Remove second mapping of send and recv buffers
With changes to how Hyper-V guest VMs flip memory between private (encrypted) and shared (decrypted), creating a second kernel virtual mapping for shared memory is no longer necessary. Everything needed for the transition to shared is handled by set_memory_decrypted(). As such, remove the code to create and manage the second mapping for the pre-allocated send and recv buffers. This mapping is the last user of hv_map_memory()/hv_unmap_memory(), so delete these functions as well. Finally, hv_map_memory() is the last user of vmap_pfn() in Hyper-V guest code, so remove the Kconfig selection of VMAP_PFN. Signed-off-by: Michael Kelley <mikelley@microsoft.com> Reviewed-by: Tianyu Lan <Tianyu.Lan@microsoft.com> Link: https://lore.kernel.org/r/1679838727-87310-11-git-send-email-mikelley@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> |
||
|
Michael Kelley
|
bb862397f4 |
Drivers: hv: vmbus: Remove second way of mapping ring buffers
With changes to how Hyper-V guest VMs flip memory between private (encrypted) and shared (decrypted), it's no longer necessary to have separate code paths for mapping VMBus ring buffers for for normal VMs and for Confidential VMs. As such, remove the code path that uses vmap_pfn(), and set the protection flags argument to vmap() to account for the difference between normal and Confidential VMs. Signed-off-by: Michael Kelley <mikelley@microsoft.com> Reviewed-by: Tianyu Lan <Tianyu.Lan@microsoft.com> Link: https://lore.kernel.org/r/1679838727-87310-10-git-send-email-mikelley@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> |
||
|
Michael Kelley
|
a5ddb74588 |
Drivers: hv: vmbus: Remove second mapping of VMBus monitor pages
With changes to how Hyper-V guest VMs flip memory between private (encrypted) and shared (decrypted), creating a second kernel virtual mapping for shared memory is no longer necessary. Everything needed for the transition to shared is handled by set_memory_decrypted(). As such, remove the code to create and manage the second mapping for VMBus monitor pages. Because set_memory_decrypted() and set_memory_encrypted() are no-ops in normal VMs, it's not even necessary to test for being in a Confidential VM (a.k.a., "Isolation VM"). Signed-off-by: Michael Kelley <mikelley@microsoft.com> Reviewed-by: Tianyu Lan <Tianyu.Lan@microsoft.com> Link: https://lore.kernel.org/r/1679838727-87310-9-git-send-email-mikelley@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> |
||
Wei Liu
|
21eb596fce |
Merge remote-tracking branch 'tip/x86/sev' into hyperv-next
Merge the following 6 patches from tip/x86/sev, which are taken from Michael Kelley's series [0]. The rest of Michael's series depend on them. x86/hyperv: Change vTOM handling to use standard coco mechanisms init: Call mem_encrypt_init() after Hyper-V hypercall init is done x86/mm: Handle decryption/re-encryption of bss_decrypted consistently Drivers: hv: Explicitly request decrypted in vmap_pfn() calls x86/hyperv: Reorder code to facilitate future work x86/ioremap: Add hypervisor callback for private MMIO mapping in coco VM 0: https://lore.kernel.org/linux-hyperv/1679838727-87310-1-git-send-email-mikelley@microsoft.com/ |
||
|
Saurabh Sengar
|
f83705a512 |
Driver: VMBus: Add Devicetree support
Update the driver to support Devicetree boot as well along with ACPI. At present the Devicetree parsing only provides the mmio region info and is not the exact copy of ACPI parsing. This is sufficient to cater all the current Devicetree usecases for VMBus. Currently Devicetree is supported only for x86 systems. Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/1679298460-11855-6-git-send-email-ssengar@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> |
||
|
Saurabh Sengar
|
9c84342380 |
Drivers: hv: vmbus: Convert acpi_device to more generic platform_device
VMBus driver code currently has direct dependency on ACPI and struct acpi_device. As a staging step toward optionally configuring based on Devicetree instead of ACPI, use a more generic platform device to reduce the dependency on ACPI where possible, though the dependency on ACPI is not completely removed. Also rename the function vmbus_acpi_remove() to the more generic vmbus_mmio_remove(). Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/1679298460-11855-4-git-send-email-ssengar@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> |
||
Luis Chamberlain
|
525f23fe58 |
hv: simplify sysctl registration
register_sysctl_table() is a deprecated compatibility wrapper. register_sysctl() can do the directory creation for you so just use that. Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Reviewed-by: Wei Liu <wei.liu@kernel.org> |
||
|
Michael Kelley
|
812b0597fb |
x86/hyperv: Change vTOM handling to use standard coco mechanisms
Hyper-V guests on AMD SEV-SNP hardware have the option of using the "virtual Top Of Memory" (vTOM) feature specified by the SEV-SNP architecture. With vTOM, shared vs. private memory accesses are controlled by splitting the guest physical address space into two halves. vTOM is the dividing line where the uppermost bit of the physical address space is set; e.g., with 47 bits of guest physical address space, vTOM is 0x400000000000 (bit 46 is set). Guest physical memory is accessible at two parallel physical addresses -- one below vTOM and one above vTOM. Accesses below vTOM are private (encrypted) while accesses above vTOM are shared (decrypted). In this sense, vTOM is like the GPA.SHARED bit in Intel TDX. Support for Hyper-V guests using vTOM was added to the Linux kernel in two patch sets[1][2]. This support treats the vTOM bit as part of the physical address. For accessing shared (decrypted) memory, these patch sets create a second kernel virtual mapping that maps to physical addresses above vTOM. A better approach is to treat the vTOM bit as a protection flag, not as part of the physical address. This new approach is like the approach for the GPA.SHARED bit in Intel TDX. Rather than creating a second kernel virtual mapping, the existing mapping is updated using recently added coco mechanisms. When memory is changed between private and shared using set_memory_decrypted() and set_memory_encrypted(), the PTEs for the existing kernel mapping are changed to add or remove the vTOM bit in the guest physical address, just as with TDX. The hypercalls to change the memory status on the host side are made using the existing callback mechanism. Everything just works, with a minor tweak to map the IO-APIC to use private accesses. To accomplish the switch in approach, the following must be done: * Update Hyper-V initialization to set the cc_mask based on vTOM and do other coco initialization. * Update physical_mask so the vTOM bit is no longer treated as part of the physical address * Remove CC_VENDOR_HYPERV and merge the associated vTOM functionality under CC_VENDOR_AMD. Update cc_mkenc() and cc_mkdec() to set/clear the vTOM bit as a protection flag. * Code already exists to make hypercalls to inform Hyper-V about pages changing between shared and private. Update this code to run as a callback from __set_memory_enc_pgtable(). * Remove the Hyper-V special case from __set_memory_enc_dec() * Remove the Hyper-V specific call to swiotlb_update_mem_attributes() since mem_encrypt_init() will now do it. * Add a Hyper-V specific implementation of the is_private_mmio() callback that returns true for the IO-APIC and vTPM MMIO addresses [1] https://lore.kernel.org/all/20211025122116.264793-1-ltykernel@gmail.com/ [2] https://lore.kernel.org/all/20211213071407.314309-1-ltykernel@gmail.com/ [ bp: Touchups. ] Signed-off-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/1679838727-87310-7-git-send-email-mikelley@microsoft.com |
||
|
Michael Kelley
|
d33ddc92db |
Drivers: hv: Explicitly request decrypted in vmap_pfn() calls
Update vmap_pfn() calls to explicitly request that the mapping be for decrypted access to the memory. There's no change in functionality since the PFNs passed to vmap_pfn() are above the shared_gpa_boundary, implicitly producing a decrypted mapping. But explicitly requesting "decrypted" allows the code to work before and after changes that cause vmap_pfn() to mask the PFNs to being below the shared_gpa_boundary. Signed-off-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Tianyu Lan <Tianyu.Lan@microsoft.com> Link: https://lore.kernel.org/r/1679838727-87310-4-git-send-email-mikelley@microsoft.com |
||
Greg Kroah-Hartman
|
75cff725d9 |
driver core: bus: mark the struct bus_type for sysfs callbacks as constant
struct bus_type should never be modified in a sysfs callback as there is nothing in the structure to modify, and frankly, the structure is almost never used in a sysfs callback, so mark it as constant to allow struct bus_type to be moved to read-only memory. Cc: "David S. Miller" <davem@davemloft.net> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Alexandre Bounine <alex.bou9@gmail.com> Cc: Alison Schofield <alison.schofield@intel.com> Cc: Ben Widawsky <bwidawsk@kernel.org> Cc: Dexuan Cui <decui@microsoft.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Harald Freudenberger <freude@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Hu Haowen <src.res@email.cn> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Laurentiu Tudor <laurentiu.tudor@nxp.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Stuart Yoder <stuyoder@gmail.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Yanteng Si <siyanteng@loongson.cn> Acked-by: Ilya Dryomov <idryomov@gmail.com> # rbd Acked-by: Ira Weiny <ira.weiny@intel.com> # cxl Reviewed-by: Alex Shi <alexs@kernel.org> Acked-by: Iwona Winiarska <iwona.winiarska@intel.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> # pci Acked-by: Wei Liu <wei.liu@kernel.org> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> # scsi Link: https://lore.kernel.org/r/20230313182918.1312597-23-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Mohammed Gamal
|
1eb65c8687 |
Drivers: vmbus: Check for channel allocation before looking up relids
relid2channel() assumes vmbus channel array to be allocated when called.
However, in cases such as kdump/kexec, not all relids will be reset by the host.
When the second kernel boots and if the guest receives a vmbus interrupt during
vmbus driver initialization before vmbus_connect() is called, before it finishes,
or if it fails, the vmbus interrupt service routine is called which in turn calls
relid2channel() and can cause a null pointer dereference.
Print a warning and error out in relid2channel() for a channel id that's invalid
in the second kernel.
Fixes:
|
||
|
Linus Torvalds
|
a93e884edf |
Driver core changes for 6.3-rc1
Here is the large set of driver core changes for 6.3-rc1.
There's a lot of changes this development cycle, most of the work falls
into two different categories:
- fw_devlink fixes and updates. This has gone through numerous review
cycles and lots of review and testing by lots of different devices.
Hopefully all should be good now, and Saravana will be keeping a
watch for any potential regression on odd embedded systems.
- driver core changes to work to make struct bus_type able to be moved
into read-only memory (i.e. const) The recent work with Rust has
pointed out a number of areas in the driver core where we are
passing around and working with structures that really do not have
to be dynamic at all, and they should be able to be read-only making
things safer overall. This is the contuation of that work (started
last release with kobject changes) in moving struct bus_type to be
constant. We didn't quite make it for this release, but the
remaining patches will be finished up for the release after this
one, but the groundwork has been laid for this effort.
Other than that we have in here:
- debugfs memory leak fixes in some subsystems
- error path cleanups and fixes for some never-able-to-be-hit
codepaths.
- cacheinfo rework and fixes
- Other tiny fixes, full details are in the shortlog
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY/ipdg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynL3gCgwzbcWu0So3piZyLiJKxsVo9C2EsAn3sZ9gN6
6oeFOjD3JDju3cQsfGgd
=Su6W
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.3-rc1.
There's a lot of changes this development cycle, most of the work
falls into two different categories:
- fw_devlink fixes and updates. This has gone through numerous review
cycles and lots of review and testing by lots of different devices.
Hopefully all should be good now, and Saravana will be keeping a
watch for any potential regression on odd embedded systems.
- driver core changes to work to make struct bus_type able to be
moved into read-only memory (i.e. const) The recent work with Rust
has pointed out a number of areas in the driver core where we are
passing around and working with structures that really do not have
to be dynamic at all, and they should be able to be read-only
making things safer overall. This is the contuation of that work
(started last release with kobject changes) in moving struct
bus_type to be constant. We didn't quite make it for this release,
but the remaining patches will be finished up for the release after
this one, but the groundwork has been laid for this effort.
Other than that we have in here:
- debugfs memory leak fixes in some subsystems
- error path cleanups and fixes for some never-able-to-be-hit
codepaths.
- cacheinfo rework and fixes
- Other tiny fixes, full details are in the shortlog
All of these have been in linux-next for a while with no reported
problems"
[ Geert Uytterhoeven points out that that last sentence isn't true, and
that there's a pending report that has a fix that is queued up - Linus ]
* tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (124 commits)
debugfs: drop inline constant formatting for ERR_PTR(-ERROR)
OPP: fix error checking in opp_migrate_dentry()
debugfs: update comment of debugfs_rename()
i3c: fix device.h kernel-doc warnings
dma-mapping: no need to pass a bus_type into get_arch_dma_ops()
driver core: class: move EXPORT_SYMBOL_GPL() lines to the correct place
Revert "driver core: add error handling for devtmpfs_create_node()"
Revert "devtmpfs: add debug info to handle()"
Revert "devtmpfs: remove return value of devtmpfs_delete_node()"
driver core: cpu: don't hand-override the uevent bus_type callback.
devtmpfs: remove return value of devtmpfs_delete_node()
devtmpfs: add debug info to handle()
driver core: add error handling for devtmpfs_create_node()
driver core: bus: update my copyright notice
driver core: bus: add bus_get_dev_root() function
driver core: bus: constify bus_unregister()
driver core: bus: constify some internal functions
driver core: bus: constify bus_get_kset()
driver core: bus: constify bus_register/unregister_notifier()
driver core: remove private pointer from struct bus_type
...
|
||
|
Linus Torvalds
|
b8878e5a5c |
hyperv-next for v6.3.
-----BEGIN PGP SIGNATURE----- iQFHBAABCAAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmPzgDgTHHdlaS5saXVA a2VybmVsLm9yZwAKCRB2FHBfkEGgXrc7CACfG4SSd8KkWU/y8Q66Irxdau0a3ETD KL4UNRKGIyKujufgFsme79O6xVSSsCNSay449wk20hqn8lnwbSRi9pUwmLn29hfd CMFleWIqgwGFfC1do5DRF1vrt1siuG/jVE07mWsEwuY2iHx/es+H7LiQKidhkndZ DhXRqoi7VYiJv5fRSumpkUJrMZiI96o9Mk09HUksdMwCn3+7RQEqHnlTH5KOozKF iMroDB72iNw5Na/USZwWL2EDRptENam3lFkPBeDPqNw0SbG4g65JGPR9DSa0Lkbq AGCJQkdU33mcYQG5MY7R4K1evufpOl/apqLW7h92j45Znr9ok6Vr2c1R =J1VT -----END PGP SIGNATURE----- Merge tag 'hyperv-next-signed-20230220' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv updates from Wei Liu: - allow Linux to run as the nested root partition for Microsoft Hypervisor (Jinank Jain and Nuno Das Neves) - clean up the return type of callback functions (Dawei Li) * tag 'hyperv-next-signed-20230220' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: x86/hyperv: Fix hv_get/set_register for nested bringup Drivers: hv: Make remove callback of hyperv driver void returned Drivers: hv: Enable vmbus driver for nested root partition x86/hyperv: Add an interface to do nested hypercalls Drivers: hv: Setup synic registers in case of nested root partition x86/hyperv: Add support for detecting nested hypervisor |
||
|
Greg Kroah-Hartman
|
6dfb077142 |
HV: hv_balloon: fix memory leak with using debugfs_lookup()
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic
at once.
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Dexuan Cui <decui@microsoft.com>
Fixes:
|
||
|
Greg Kroah-Hartman
|
2a81ada32f |
driver core: make struct bus_type.uevent() take a const *
The uevent() callback in struct bus_type should not be modifying the device that is passed into it, so mark it as a const * and propagate the function signature changes out into all relevant subsystems that use this callback. Acked-by: Rafael J. Wysocki <rafael@kernel.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230111113018.459199-16-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Dawei Li
|
96ec293962 |
Drivers: hv: Make remove callback of hyperv driver void returned
Since commit
|
||
Jinank Jain
|
8536290f00 |
Drivers: hv: Enable vmbus driver for nested root partition
Currently VMBus driver is not initialized for root partition but we need to enable the VMBus driver for nested root partition. This is required, so that L2 root can use the VMBus devices. Signed-off-by: Jinank Jain <jinankjain@linux.microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/c3cdd2cf2bffeba388688640eb61bc182e4c041d.1672639707.git.jinankjain@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> |
||
|
Jinank Jain
|
7fec185a56 |
Drivers: hv: Setup synic registers in case of nested root partition
Child partitions are free to allocate SynIC message and event page but in case of root partition it must use the pages allocated by Microsoft Hypervisor (MSHV). Base address for these pages can be found using synthetic MSRs exposed by MSHV. There is a slight difference in those MSRs for nested vs non-nested root partition. Signed-off-by: Jinank Jain <jinankjain@linux.microsoft.com> Reviewed-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/cb951fb1ad6814996fc54f4a255c5841a20a151f.1672639707.git.jinankjain@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> |
||
|
Jinank Jain
|
c4bdf94f97 |
x86/hyperv: Add support for detecting nested hypervisor
Detect if Linux is running as a nested hypervisor in the root partition for Microsoft Hypervisor, using flags provided by MSHV. Expose a new variable hv_nested that is used later for decisions specific to the nested use case. Signed-off-by: Jinank Jain <jinankjain@linux.microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/8e3e7112806e81d2292a66a56fe547162754ecea.1672639707.git.jinankjain@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> |
||
|
Linus Torvalds
|
7e68dd7d07 |
Networking changes for 6.2.
Core
----
- Allow live renaming when an interface is up
- Add retpoline wrappers for tc, improving considerably the
performances of complex queue discipline configurations.
- Add inet drop monitor support.
- A few GRO performance improvements.
- Add infrastructure for atomic dev stats, addressing long standing
data races.
- De-duplicate common code between OVS and conntrack offloading
infrastructure.
- A bunch of UBSAN_BOUNDS/FORTIFY_SOURCE improvements.
- Netfilter: introduce packet parser for tunneled packets
- Replace IPVS timer-based estimators with kthreads to scale up
the workload with the number of available CPUs.
- Add the helper support for connection-tracking OVS offload.
BPF
---
- Support for user defined BPF objects: the use case is to allocate
own objects, build own object hierarchies and use the building
blocks to build own data structures flexibly, for example, linked
lists in BPF.
- Make cgroup local storage available to non-cgroup attached BPF
programs.
- Avoid unnecessary deadlock detection and failures wrt BPF task
storage helpers.
- A relevant bunch of BPF verifier fixes and improvements.
- Veristat tool improvements to support custom filtering, sorting,
and replay of results.
- Add LLVM disassembler as default library for dumping JITed code.
- Lots of new BPF documentation for various BPF maps.
- Add bpf_rcu_read_{,un}lock() support for sleepable programs.
- Add RCU grace period chaining to BPF to wait for the completion
of access from both sleepable and non-sleepable BPF programs.
- Add support storing struct task_struct objects as kptrs in maps.
- Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer
values.
- Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions.
Protocols
---------
- TCP: implement Protective Load Balancing across switch links.
- TCP: allow dynamically disabling TCP-MD5 static key, reverting
back to fast[er]-path.
- UDP: Introduce optional per-netns hash lookup table.
- IPv6: simplify and cleanup sockets disposal.
- Netlink: support different type policies for each generic
netlink operation.
- MPTCP: add MSG_FASTOPEN and FastOpen listener side support.
- MPTCP: add netlink notification support for listener sockets
events.
- SCTP: add VRF support, allowing sctp sockets binding to VRF
devices.
- Add bridging MAC Authentication Bypass (MAB) support.
- Extensions for Ethernet VPN bridging implementation to better
support multicast scenarios.
- More work for Wi-Fi 7 support, comprising conversion of all
the existing drivers to internal TX queue usage.
- IPSec: introduce a new offload type (packet offload) allowing
complete header processing and crypto offloading.
- IPSec: extended ack support for more descriptive XFRM error
reporting.
- RXRPC: increase SACK table size and move processing into a
per-local endpoint kernel thread, reducing considerably the
required locking.
- IEEE 802154: synchronous send frame and extended filtering
support, initial support for scanning available 15.4 networks.
- Tun: bump the link speed from 10Mbps to 10Gbps.
- Tun/VirtioNet: implement UDP segmentation offload support.
Driver API
----------
- PHY/SFP: improve power level switching between standard
level 1 and the higher power levels.
- New API for netdev <-> devlink_port linkage.
- PTP: convert existing drivers to new frequency adjustment
implementation.
- DSA: add support for rx offloading.
- Autoload DSA tagging driver when dynamically changing protocol.
- Add new PCP and APPTRUST attributes to Data Center Bridging.
- Add configuration support for 800Gbps link speed.
- Add devlink port function attribute to enable/disable RoCE and
migratable.
- Extend devlink-rate to support strict prioriry and weighted fair
queuing.
- Add devlink support to directly reading from region memory.
- New device tree helper to fetch MAC address from nvmem.
- New big TCP helper to simplify temporary header stripping.
New hardware / drivers
----------------------
- Ethernet:
- Marvel Octeon CNF95N and CN10KB Ethernet Switches.
- Marvel Prestera AC5X Ethernet Switch.
- WangXun 10 Gigabit NIC.
- Motorcomm yt8521 Gigabit Ethernet.
- Microchip ksz9563 Gigabit Ethernet Switch.
- Microsoft Azure Network Adapter.
- Linux Automation 10Base-T1L adapter.
- PHY:
- Aquantia AQR112 and AQR412.
- Motorcomm YT8531S.
- PTP:
- Orolia ART-CARD.
- WiFi:
- MediaTek Wi-Fi 7 (802.11be) devices.
- RealTek rtw8821cu, rtw8822bu, rtw8822cu and rtw8723du USB
devices.
- Bluetooth:
- Broadcom BCM4377/4378/4387 Bluetooth chipsets.
- Realtek RTL8852BE and RTL8723DS.
- Cypress.CYW4373A0 WiFi + Bluetooth combo device.
Drivers
-------
- CAN:
- gs_usb: bus error reporting support.
- kvaser_usb: listen only and bus error reporting support.
- Ethernet NICs:
- Intel (100G):
- extend action skbedit to RX queue mapping.
- implement devlink-rate support.
- support direct read from memory.
- nVidia/Mellanox (mlx5):
- SW steering improvements, increasing rules update rate.
- Support for enhanced events compression.
- extend H/W offload packet manipulation capabilities.
- implement IPSec packet offload mode.
- nVidia/Mellanox (mlx4):
- better big TCP support.
- Netronome Ethernet NICs (nfp):
- IPsec offload support.
- add support for multicast filter.
- Broadcom:
- RSS and PTP support improvements.
- AMD/SolarFlare:
- netlink extened ack improvements.
- add basic flower matches to offload, and related stats.
- Virtual NICs:
- ibmvnic: introduce affinity hint support.
- small / embedded:
- FreeScale fec: add initial XDP support.
- Marvel mv643xx_eth: support MII/GMII/RGMII modes for Kirkwood.
- TI am65-cpsw: add suspend/resume support.
- Mediatek MT7986: add RX wireless wthernet dispatch support.
- Realtek 8169: enable GRO software interrupt coalescing per
default.
- Ethernet high-speed switches:
- Microchip (sparx5):
- add support for Sparx5 TC/flower H/W offload via VCAP.
- Mellanox mlxsw:
- add 802.1X and MAC Authentication Bypass offload support.
- add ip6gre support.
- Embedded Ethernet switches:
- Mediatek (mtk_eth_soc):
- improve PCS implementation, add DSA untag support.
- enable flow offload support.
- Renesas:
- add rswitch R-Car Gen4 gPTP support.
- Microchip (lan966x):
- add full XDP support.
- add TC H/W offload via VCAP.
- enable PTP on bridge interfaces.
- Microchip (ksz8):
- add MTU support for KSZ8 series.
- Qualcomm 802.11ax WiFi (ath11k):
- support configuring channel dwell time during scan.
- MediaTek WiFi (mt76):
- enable Wireless Ethernet Dispatch (WED) offload support.
- add ack signal support.
- enable coredump support.
- remain_on_channel support.
- Intel WiFi (iwlwifi):
- enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities.
- 320 MHz channels support.
- RealTek WiFi (rtw89):
- new dynamic header firmware format support.
- wake-over-WLAN support.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=CbJC
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Allow live renaming when an interface is up
- Add retpoline wrappers for tc, improving considerably the
performances of complex queue discipline configurations
- Add inet drop monitor support
- A few GRO performance improvements
- Add infrastructure for atomic dev stats, addressing long standing
data races
- De-duplicate common code between OVS and conntrack offloading
infrastructure
- A bunch of UBSAN_BOUNDS/FORTIFY_SOURCE improvements
- Netfilter: introduce packet parser for tunneled packets
- Replace IPVS timer-based estimators with kthreads to scale up the
workload with the number of available CPUs
- Add the helper support for connection-tracking OVS offload
BPF:
- Support for user defined BPF objects: the use case is to allocate
own objects, build own object hierarchies and use the building
blocks to build own data structures flexibly, for example, linked
lists in BPF
- Make cgroup local storage available to non-cgroup attached BPF
programs
- Avoid unnecessary deadlock detection and failures wrt BPF task
storage helpers
- A relevant bunch of BPF verifier fixes and improvements
- Veristat tool improvements to support custom filtering, sorting,
and replay of results
- Add LLVM disassembler as default library for dumping JITed code
- Lots of new BPF documentation for various BPF maps
- Add bpf_rcu_read_{,un}lock() support for sleepable programs
- Add RCU grace period chaining to BPF to wait for the completion of
access from both sleepable and non-sleepable BPF programs
- Add support storing struct task_struct objects as kptrs in maps
- Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer
values
- Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions
Protocols:
- TCP: implement Protective Load Balancing across switch links
- TCP: allow dynamically disabling TCP-MD5 static key, reverting back
to fast[er]-path
- UDP: Introduce optional per-netns hash lookup table
- IPv6: simplify and cleanup sockets disposal
- Netlink: support different type policies for each generic netlink
operation
- MPTCP: add MSG_FASTOPEN and FastOpen listener side support
- MPTCP: add netlink notification support for listener sockets events
- SCTP: add VRF support, allowing sctp sockets binding to VRF devices
- Add bridging MAC Authentication Bypass (MAB) support
- Extensions for Ethernet VPN bridging implementation to better
support multicast scenarios
- More work for Wi-Fi 7 support, comprising conversion of all the
existing drivers to internal TX queue usage
- IPSec: introduce a new offload type (packet offload) allowing
complete header processing and crypto offloading
- IPSec: extended ack support for more descriptive XFRM error
reporting
- RXRPC: increase SACK table size and move processing into a
per-local endpoint kernel thread, reducing considerably the
required locking
- IEEE 802154: synchronous send frame and extended filtering support,
initial support for scanning available 15.4 networks
- Tun: bump the link speed from 10Mbps to 10Gbps
- Tun/VirtioNet: implement UDP segmentation offload support
Driver API:
- PHY/SFP: improve power level switching between standard level 1 and
the higher power levels
- New API for netdev <-> devlink_port linkage
- PTP: convert existing drivers to new frequency adjustment
implementation
- DSA: add support for rx offloading
- Autoload DSA tagging driver when dynamically changing protocol
- Add new PCP and APPTRUST attributes to Data Center Bridging
- Add configuration support for 800Gbps link speed
- Add devlink port function attribute to enable/disable RoCE and
migratable
- Extend devlink-rate to support strict prioriry and weighted fair
queuing
- Add devlink support to directly reading from region memory
- New device tree helper to fetch MAC address from nvmem
- New big TCP helper to simplify temporary header stripping
New hardware / drivers:
- Ethernet:
- Marvel Octeon CNF95N and CN10KB Ethernet Switches
- Marvel Prestera AC5X Ethernet Switch
- WangXun 10 Gigabit NIC
- Motorcomm yt8521 Gigabit Ethernet
- Microchip ksz9563 Gigabit Ethernet Switch
- Microsoft Azure Network Adapter
- Linux Automation 10Base-T1L adapter
- PHY:
- Aquantia AQR112 and AQR412
- Motorcomm YT8531S
- PTP:
- Orolia ART-CARD
- WiFi:
- MediaTek Wi-Fi 7 (802.11be) devices
- RealTek rtw8821cu, rtw8822bu, rtw8822cu and rtw8723du USB
devices
- Bluetooth:
- Broadcom BCM4377/4378/4387 Bluetooth chipsets
- Realtek RTL8852BE and RTL8723DS
- Cypress.CYW4373A0 WiFi + Bluetooth combo device
Drivers:
- CAN:
- gs_usb: bus error reporting support
- kvaser_usb: listen only and bus error reporting support
- Ethernet NICs:
- Intel (100G):
- extend action skbedit to RX queue mapping
- implement devlink-rate support
- support direct read from memory
- nVidia/Mellanox (mlx5):
- SW steering improvements, increasing rules update rate
- Support for enhanced events compression
- extend H/W offload packet manipulation capabilities
- implement IPSec packet offload mode
- nVidia/Mellanox (mlx4):
- better big TCP support
- Netronome Ethernet NICs (nfp):
- IPsec offload support
- add support for multicast filter
- Broadcom:
- RSS and PTP support improvements
- AMD/SolarFlare:
- netlink extened ack improvements
- add basic flower matches to offload, and related stats
- Virtual NICs:
- ibmvnic: introduce affinity hint support
- small / embedded:
- FreeScale fec: add initial XDP support
- Marvel mv643xx_eth: support MII/GMII/RGMII modes for Kirkwood
- TI am65-cpsw: add suspend/resume support
- Mediatek MT7986: add RX wireless wthernet dispatch support
- Realtek 8169: enable GRO software interrupt coalescing per
default
- Ethernet high-speed switches:
- Microchip (sparx5):
- add support for Sparx5 TC/flower H/W offload via VCAP
- Mellanox mlxsw:
- add 802.1X and MAC Authentication Bypass offload support
- add ip6gre support
- Embedded Ethernet switches:
- Mediatek (mtk_eth_soc):
- improve PCS implementation, add DSA untag support
- enable flow offload support
- Renesas:
- add rswitch R-Car Gen4 gPTP support
- Microchip (lan966x):
- add full XDP support
- add TC H/W offload via VCAP
- enable PTP on bridge interfaces
- Microchip (ksz8):
- add MTU support for KSZ8 series
- Qualcomm 802.11ax WiFi (ath11k):
- support configuring channel dwell time during scan
- MediaTek WiFi (mt76):
- enable Wireless Ethernet Dispatch (WED) offload support
- add ack signal support
- enable coredump support
- remain_on_channel support
- Intel WiFi (iwlwifi):
- enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities
- 320 MHz channels support
- RealTek WiFi (rtw89):
- new dynamic header firmware format support
- wake-over-WLAN support"
* tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2002 commits)
ipvs: fix type warning in do_div() on 32 bit
net: lan966x: Remove a useless test in lan966x_ptp_add_trap()
net: ipa: add IPA v4.7 support
dt-bindings: net: qcom,ipa: Add SM6350 compatible
bnxt: Use generic HBH removal helper in tx path
IPv6/GRO: generic helper to remove temporary HBH/jumbo header in driver
selftests: forwarding: Add bridge MDB test
selftests: forwarding: Rename bridge_mdb test
bridge: mcast: Support replacement of MDB port group entries
bridge: mcast: Allow user space to specify MDB entry routing protocol
bridge: mcast: Allow user space to add (*, G) with a source list and filter mode
bridge: mcast: Add support for (*, G) with a source list and filter mode
bridge: mcast: Avoid arming group timer when (S, G) corresponds to a source
bridge: mcast: Add a flag for user installed source entries
bridge: mcast: Expose __br_multicast_del_group_src()
bridge: mcast: Expose br_multicast_new_group_src()
bridge: mcast: Add a centralized error path
bridge: mcast: Place netlink policy before validation functions
bridge: mcast: Split (*, G) and (S, G) addition into different functions
bridge: mcast: Do not derive entry type from its filter mode
...
|