Pull HID fixes from Jiri Kosina:
- fix for Intel-ISH driver to make sure it gets aoutoloaded only on
matching devices and not universally (Thomas Weißschuh)
- fix for Wacom driver reporting invalid contact under certain
circumstances (Jason Gerecke)
- probing fix for ft260 dirver (Michael Zaidman)
- fix for generic keycode remapping (Thomas Weißschuh)
- fix for division by zero in hid-magicmouse (Claudia Pellegrino)
- other tiny assorted fixes and new device IDs
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: multitouch: Fix Iiyama ProLite T1931SAW (0eef:0001 again!)
HID: nintendo: eliminate dead datastructures in !CONFIG_NINTENDO_FF case
HID: magicmouse: prevent division by 0 on scroll
HID: thrustmaster: fix sparse warnings
HID: Ignore battery for Elan touchscreen on HP Envy X360 15-eu0xxx
HID: input: set usage type to key on keycode remap
HID: input: Fix parsing of HID_CP_CONSUMER_CONTROL fields
HID: ft260: fix i2c probing for hwmon devices
Revert "HID: hid-asus.c: Maps key 0x35 (display off) to KEY_SCREENLOCK"
HID: intel-ish-hid: fix module device-id handling
mod_devicetable: fix kdocs for ishtp_device_id
HID: wacom: Use "Confidence" flag to prevent reporting invalid contacts
HID: nintendo: unlock on error in joycon_leds_create()
platform/x86: isthp_eclite: only load for matching devices
platform/chrome: chros_ec_ishtp: only load for matching devices
HID: intel-ish-hid: hid-client: only load for matching devices
HID: intel-ish-hid: fw-loader: only load for matching devices
HID: intel-ish-hid: use constants for modaliases
HID: intel-ish-hid: add support for MODULE_DEVICE_TABLE()
A late addititon to the intel-ish-hid framework caused a build failure
with clang, and introduced an ABI to the module loader that stops working
if any driver ever needs to bind to more than one UUID:
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:1067:4: error: initializer element is not a compile-time constant
Change the ishtp_device_id to have correct documentation and a driver_data
field like all the other ones, and change the drivers to use the ID table
as the primary identification in a way that works with all compilers
and avoids duplciating the identifiers.
Fixes: f155dfeaa4 ("platform/x86: isthp_eclite: only load for matching devices")
Fixes: facfe0a4fd ("platform/chrome: chros_ec_ishtp: only load for matching devices")
Fixes: 0d0cccc0fd ("HID: intel-ish-hid: hid-client: only load for matching devices")
Fixes: 44e2a58cb8 ("HID: intel-ish-hid: fw-loader: only load for matching devices")
Fixes: cb1a2c6847 ("HID: intel-ish-hid: use constants for modaliases")
Fixes: fa443bc3c1 ("HID: intel-ish-hid: add support for MODULE_DEVICE_TABLE()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
[jkosina@suse.cz: fix ecl_ishtp_cl_driver.id initialization]
[jkosina@suse.cz: fix conflict with already fixed kerneldoc]
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Previously it was loaded for all ISHTP devices.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Use the existing cros_ec_command() for cros_ec_check_features(). This
eliminates an unnecessary duplication of the memory allocation/free and
memory copy code.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Link: https://lore.kernel.org/r/20211004170716.86601-2-pmalani@chromium.org
Signed-off-by: Benson Leung <bleung@chromium.org>
The Chrome EC's features are returned through an
ec_response_get_features struct, but they are stored in an independent
array. Although the two are effectively the same at present (2 unsigned
32 bit ints), there is the possibility that they could go out of sync.
Avoid this by only using the EC struct to store the features.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Link: https://lore.kernel.org/r/20211004170716.86601-1-pmalani@chromium.org
Signed-off-by: Benson Leung <bleung@chromium.org>
Add a version parameter to cros_ec_command() for callers that may want
to specify which version of the host command they would like to use.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210930022403.3358070-5-pmalani@chromium.org
Convert the input and output data pointers for cros_ec_command() to
void pointers so that the callers don't have to cast their custom
structs to uint8_t *.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210930022403.3358070-4-pmalani@chromium.org
cros_ec_command() can be used by other modules too. So, move it to a
common location and export it.
This patch does not introduce any functional changes.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210930022403.3358070-3-pmalani@chromium.org
Rename cros_ec_pd_command()_to cros_ec_command() since it can be used
for sending any host command, and not just PD related ones.
This patch does not introduce any functional changes.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210930022403.3358070-2-pmalani@chromium.org
We should get 'driver_data' from 'struct device' directly. Going via
platform_device is an unneeded step back and forth.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210920090522.23784-9-wsa+renesas@sang-engineering.com
cros_ec_check_features() now returns a boolean. Remove the double NOT
operator since it's not required anymore.
No functional changes are expected with this patch.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210923200321.3623222-1-pmalani@chromium.org
The kerneldoc for cros_ec_check_features() states that it returns 1 or 0
depedending on whether a feature is supported or not, but it instead
returns a negative error number in one case, and a non-1 bitmask in
other cases.
Since all call-sites only check for a 1 or 0 return value, update
the function to return boolean values.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210916014632.2662612-1-pmalani@chromium.org
Replace the cros_typec_feature_supported() function with the
pre-existing cros_ec_check_features() function which does the same
thing.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Link: https://lore.kernel.org/r/20210803173619.91539-2-pmalani@chromium.org
Signed-off-by: Benson Leung <bleung@chromium.org>
Sometimes kernel is trying to probe Fingerprint MCU (FPMCU) when it
hasn't initialized SPI yet. This can happen because FPMCU is restarted
during system boot and kernel can send message in short window
eg. between sysjump to RW and SPI initialization.
Cc: <stable@vger.kernel.org> # 4.4+
Signed-off-by: Patryk Duda <pdk@semihalf.com>
Link: https://lore.kernel.org/r/20210518140758.29318-1-pdk@semihalf.com
Signed-off-by: Benson Leung <bleung@chromium.org>
Add trace event to report samples and their timestamp coming from the
EC. It allows to check if the timestamps are correct and the filter is
working correctly without introducing too much latency.
To enable these events:
cd /sys/kernel/debug/tracing/
echo 1 > events/cros_ec/enable
echo 0 > events/cros_ec/cros_ec_request_start/enable
echo 0 > events/cros_ec/cros_ec_request_done/enable
echo 1 > tracing_on
cat trace_pipe
Observe event flowing:
irq/105-chromeo-95 [000] .... 613.659758: cros_ec_sensorhub_timestamp: ...
irq/105-chromeo-95 [000] .... 613.665219: cros_ec_sensorhub_filter: dx: ...
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
cros_ec_typec:
* Changes around DP mode check, hard reset, tracking port change.
cros_ec misc:
* wilco_ec: Convert stream-like files from nonseekable to stream open
* cros_usbpd_notify: Listen to EC_HSOT_EVENT_USB_MUX host event
* fix format warning in cros_ec_typec
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQCtZK6p/AktxXfkOlzbaomhzOwwgUCYJWylAAKCRBzbaomhzOw
ws4SAQD9Alp6FpY6ne62JRHCyQBdEHwDWGQGBvE8NRkHSRcSWAD8C5vgBLGX7Zx8
wLfzrZ6x3BKGkOJuuk3+zhVu8He7WQQ=
=caTR
-----END PGP SIGNATURE-----
Merge tag 'tag-chrome-platform-for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Benson Leung:
"cros_ec_typec:
- Changes around DP mode check, hard reset, tracking port change.
cros_ec misc:
- wilco_ec: Convert stream-like files from nonseekable to stream open
- cros_usbpd_notify: Listen to EC_HSOT_EVENT_USB_MUX host event
- fix format warning in cros_ec_typec"
* tag 'tag-chrome-platform-for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_ec_lpc: Use DEFINE_MUTEX() for mutex lock
platform/chrome: cros_usbpd_notify: Listen to EC_HOST_EVENT_USB_MUX host event
platform/chrome: cros_ec_typec: Add DP mode check
platform/chrome: cros_ec_typec: Handle hard reset
platform/chrome: cros_ec: Add Type C hard reset
platform/chrome: cros_ec_typec: Track port role
platform/chrome: cros_ec_typec: fix clang -Wformat warning
platform/chrome: cros_ec_typec: Check for device within remove function
platform/chrome: wilco_ec: convert stream-like files from nonseekable_open -> stream_open
mutex lock can be initialized automatically with DEFINE_MUTEX()
rather than explicitly calling mutex_init().
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210409095138.2293869-1-yebin10@huawei.com
There are certain transitional situations where the dp_mode field in the
PD_CONTROL response might not be populated with the right DP pin
assignment value yet. Add a check for that to avoid sending an invalid
value to the Type C mode switch.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210421042108.2002-1-pmalani@chromium.org
The Chrome Embedded Controller (EC) generates a hard reset type C event
when a USB Power Delivery (PD) hard reset is encountered. Handle this
event by unregistering the partner and cable on the associated port and
clearing the event flag.
Cc: Benson Leung <bleung@chromium.org>
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210420171617.3830902-2-pmalani@chromium.org
Stash the currently reported port role in the port struct and add a
check for that too while determining whether to re-configure on-board
Type C switches (this deals with cases like role swaps where the mux
flags don't change, but the port role does).
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Suggested-by: Nikunj A. Dadhania <nikunj.dadhania@intel.com>
Tested-by: Deepti Deshatty <deepti.deshatty@intel.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210420171008.3829549-1-pmalani@chromium.org
The older device property API is going to be removed soon
and that will affect also I2C subystem. Supplying complete
software nodes instead of only the properties in them for
the I2C devices.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Clang warns about using the %h format modifier to truncate an
integer:
drivers/platform/chrome/cros_ec_typec.c:1031:3: error: format specifies type 'unsigned char' but the argument has type 'unsigned int' [-Werror,-Wformat]
typec->pd_ctrl_ver);
^~~~~~~~~~~~~~~~~~
include/linux/dev_printk.h:131:47: note: expanded from macro 'dev_dbg'
dev_printk(KERN_DEBUG, dev, dev_fmt(fmt), ##__VA_ARGS__); \
~~~ ^~~~~~~~~~~
Use an explicit bit mask to limit the number to its lower eight bits
instead.
Fixes: ad7c0510c9 ("platform/chrome: cros_ec_typec: Update port info from EC")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210322115602.4003221-1-arnd@kernel.org
In a couple of call sites, we use the same pattern of checking for a
partner or cable device before attempting to remove it. Simplify this by
moving those checks into the remove functions.
Cc: Benson Leung <bleung@chromium.org>
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210319015103.3751672-1-pmalani@chromium.org
Eliminate the following coccicheck warning:
./drivers/platform/chrome/wilco_ec/telemetry.c:259:1-17: WARNING:
telem_fops: .read() and .write() have stream semantic; safe to change
nonseekable_open -> stream_open.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/1612688918-63132-1-git-send-email-yang.lee@linux.alibaba.com
The driver core ignores the return value of struct bus_type::remove()
because there is only little that can be done. To simplify the quest to
make this function return void, let struct ishtp_cl_driver::remove() return
void, too. All users already unconditionally return 0, this commit makes
it obvious that returning an error value is a bad idea.
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Lots of changes to the cros_ec_typec driver for 5.12.
A portion of this this set of cros_ec_typec driver's changes
(up to 8553a979fc platform/chrome: cros_ec_typec: Send mux configuration acknowledgment to EC)
was merged through GregKH's USB tree in immutable branch
tag-ib-usb-typec-chrome-platform-cros-ec-typec-changes-for-5.12
in order to satisfy cros_ec_typec driver and typec connector class subsystem
dependencies of subsequent changes. Please see greg's usb-5.12-rc1.
cros_ec_typec:
* Registration of cable plug information
* Support for SOP' plug registration and altmodes
* Support for reporting number of altmodes supported by partners and plugs
* Send mux configuration ack to EC via a new host command
* Support mux control with no port partner present
* Decouple cable removal from partner removal
cros_ec misc:
* Fix some event masking in cros_ec_proto.
* Gwendal reworked cros_ec's top and bottom half for consistency in ishtp and
rpmsg
* Constify static attribute_group structs
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQCtZK6p/AktxXfkOlzbaomhzOwwgUCYC3jIgAKCRBzbaomhzOw
wpNqAQCTtcpgAVit937B11VSjjJmT+Cb4evb5ny7BgFSzdCjtwD+Kg2AlJWGri5z
2AdFurQNqBu5FxlegXZbYa2tONVHqwE=
=3NuV
-----END PGP SIGNATURE-----
Merge tag 'tag-chrome-platform-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Benson Leung:
"Lots of changes to the cros_ec_typec driver for 5.12.
A portion of this this set of cros_ec_typec driver's changes was
merged through GregKH's USB tree in order to satisfy cros_ec_typec
driver and typec connector class subsystem dependencies of subsequent
changes.
Summary:
cros_ec_typec:
- Registration of cable plug information
- Support for SOP' plug registration and altmodes
- Support for reporting number of altmodes supported by partners and
plugs
- Send mux configuration ack to EC via a new host command
- Support mux control with no port partner present
- Decouple cable removal from partner removal
cros_ec misc:
- Fix some event masking in cros_ec_proto.
- Gwendal reworked cros_ec's top and bottom half for consistency in
ishtp and rpmsg
- Constify static attribute_group structs"
* tag 'tag-chrome-platform-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_ec_typec: Flush pending work
platform/chrome: cros_ec_types: Support disconnect events without partners
platform/chrome: cros_ec_typec: Skip port partner check in configure_mux()
platform/chrome: cros_ec_typec: Decouple partner removal
platform/chrome: cros_ec: Call interrupt bottom half at probe time
platform/chrome: cros_ec: Call interrupt bottom half in ISH or RPMSG mode
platform/chrome: cros_ec_sysfs: Add cold-ap-off to sysfs reboot.
platform/chrome: cros_ec_commands: Add host command to keep AP off after EC reset.
platform/chrome: Constify static attribute_group structs
platform/chrome: cros_ec_proto: Add LID and BATTERY to default mask
platform/chrome: cros_ec_proto: Use EC_HOST_EVENT_MASK not BIT
When a PD notifier event arrives, a new work event won't be enqueued if
the current one hasn't completed. This could lead to dropped events.
So, flush any pending work before scheduling the new instance.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Link: https://lore.kernel.org/r/20210211193221.610867-1-pmalani@chromium.org
Signed-off-by: Benson Leung <bleung@chromium.org>
There are certain scenarios, where a disconnect event might
occur on a Type-C port with no port partners. This is required
to enable communication to Burnside Bridge USB4 retimers.
Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com>
Reviewed-by: Prashant Malani <pmalani@chromium.org>
Link: https://lore.kernel.org/r/20210205195113.20277-3-rajmohan.mani@intel.com
Signed-off-by: Benson Leung <bleung@chromium.org>
For certain needs like updating the USB4 retimer firmware when no
device are connected, the Type-C ports require mux configuration,
to be able to communicate with the retimer. So removed the above
check to allow for mux configuration of Type-C ports, to enable
retimer communication.
Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com>
Reviewed-by: Prashant Malani <pmalani@chromium.org>
Link: https://lore.kernel.org/r/20210205195113.20277-2-rajmohan.mani@intel.com
Signed-off-by: Benson Leung <bleung@chromium.org>
Clear USB Type C discovery events from the Chrome EC once they've been
successfully handled.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reported-by: Benson Leung <bleung@chromium.org>
Tested-by: Benson Leung <bleung@chromium.org>
Link: https://lore.kernel.org/r/20210203021539.745239-2-pmalani@chromium.org
Signed-off-by: Benson Leung <bleung@chromium.org>
Currently, we return if there is no partner present when
!PD_CTRL_RESP_ENABLED_CONNECTED, without proceeding further. This ties
partner removal to cable removal, whereas the two should be independent.
Update the check to remove a partner if one was registered, but continue
after that instead of returning.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Link: https://lore.kernel.org/r/20210202224001.3810274-1-pmalani@chromium.org
Signed-off-by: Benson Leung <bleung@chromium.org>
When SOP Discovery is done, set the opmode to PD if status indicates
SOP is connected.
SOP connected indicates a PD contract is in place, and is a solid
indication we have transitioned to PD power negotiation, either as
source or sink.
Signed-off-by: Benson Leung <bleung@chromium.org>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Prashant Malani <pmalani@chromium.org>
Link: https://lore.kernel.org/r/20210129061406.2680146-7-bleung@chromium.org
Signed-off-by: Benson Leung <bleung@chromium.org>
Status provides sop_revision. Process it, and set it using the new
setter in the typec class.
Signed-off-by: Benson Leung <bleung@chromium.org>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Prashant Malani <pmalani@chomium.org>
Link: https://lore.kernel.org/r/20210129061406.2680146-6-bleung@chromium.org
Signed-off-by: Benson Leung <bleung@chromium.org>
cros_typec_handle_sop_prime_disc now takes the PD revision provided
by the EC_CMD_TYPEC_STATUS command response for the SOP'.
Attach the properly formatted pd_revision to the cable desc before
registering the cable.
Signed-off-by: Benson Leung <bleung@chromium.org>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Prashant Malani <pmalani@chromium.org>
Link: https://lore.kernel.org/r/20210129061406.2680146-5-bleung@chromium.org
Signed-off-by: Benson Leung <bleung@chromium.org>
While the AP was powered off, the EC may have send messages.
If the message is not serviced within 3s, the EC stops sending message.
Unlock the EC by purging stale messages at probe time.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210122054637.1422289-3-gwendal@chromium.org
Add cold-ap-off to ChromeOS EC sysfs reboot file option, corresponds to
the EC_REBOOT_COLD_AP_OFF flag, that will reset EC and keep AP off.
Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20201221041231.14516-2-pihsun@chromium.org
The only usage of these is to print their name in a dev_err-message, and
to pass their address to sysfs_create_group() and sysfs_remove_group(),
both which takes pointers to const. Make them const to allow the compiler
to put them in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210109001748.58036-1-rikard.falkeborn@gmail.com
After 'platform/chrome: cros_ec_proto: Use EC_HOST_EVENT_MASK not BIT'
some of the flags are not quite correct.
LID_CLOSED is used to suspend the device, so it makes sense to ignore that.
BATTERY events are also frequent and causing spurious wakes on elm/hana
mt8173 devices.
Fixes: c214e564ac ("platform/chrome: cros_ec_proto: ignore unnecessary wakeups on old ECs")
Signed-off-by: Evan Benn <evanbenn@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20201209220306.2.I3291bf83e4884c206b097ede34780e014fa3e265@changeid
The host_event_code enum is 1-based, use EC_HOST_EVENT_MASK not BIT to
generate the intended mask. This patch changes the behaviour of the
mask, a following patch will restore the intended behaviour:
'Add LID and BATTERY to default mask'
Fixes: c214e564ac ("platform/chrome: cros_ec_proto: ignore unnecessary wakeups on old ECs")
Signed-off-by: Evan Benn <evanbenn@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20201209220306.1.I6133572c0ab3c6b95426f804bac2d3833e24acb1@changeid
In some corner cases downgrade of the superspeed typec device(e.g. Dell
typec Dock, apple dongle) was seen because before the SOC mux configuration
finishes, EC starts configuring the next mux state.
With this change, once the SOC mux is configured, kernel will send an
acknowledgment to EC via Host command EC_CMD_USB_PD_MUX_ACK [1].
After sending the host event EC will wait for the acknowledgment from
kernel before starting the PD negotiation for the next mux state. This
helps to have a framework to build better error handling along with the
synchronization of timing sensitive mux states.
This change also brings in corresponding EC header updates from the EC code
base [1].
[1]:
https://chromium.googlesource.com/chromiumos/platform/ec/+/refs/heads/master/include/ec_commands.h
Signed-off-by: Utkarsh Patel <utkarsh.h.patel@intel.com>
Reviewed-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Benson Leung <bleung@chromium.org>
Link: https://lore.kernel.org/r/20201210060903.2205-3-utkarsh.h.patel@intel.com
cros_typec_cmds_supported() is currently being used to check only one
feature flag.
Add a new feature parameter to it so that it can be used to check
multiple feature flags supported in cros_ec.
Rename cros_typec_cmds_supported() to cros_typec_feature_supported().
Signed-off-by: Utkarsh Patel <utkarsh.h.patel@intel.com>
Reviewed-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Benson Leung <bleung@chromium.org>
Link: https://lore.kernel.org/r/20201210060903.2205-2-utkarsh.h.patel@intel.com
Modify the altmode registration (and unregistration) code so that it
can be used by both partners and plugs.
Then, add code to register plug altmodes using the newly parameterized
function. Also set the number of alternate modes for the plug using the
associated Type C connector class function
typec_plug_set_num_altmodes().
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Link: https://lore.kernel.org/r/20201116201150.2919178-12-pmalani@chromium.org
In order to register cable alternate modes, we need to first register a
plug object. Use the Type C connector class framework to register a SOP'
plug for this purpose.
Since a cable and plug go hand in hand, we can handle the registration
and removal together.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Link: https://lore.kernel.org/r/20201116201150.2919178-11-pmalani@chromium.org
