Current release - regressions:
- Revert "net: team: use IFF_NO_ADDRCONF flag to prevent ipv6
addrconf", fix nsna_ping mode of team
- wifi: mt76: fix bugs in Rx queue handling and DMA mapping
- eth: mlx5:
- add missing mutex_unlock in error reporter
- protect global IPsec ASO with a lock
Current release - new code bugs:
- rxrpc: fix wrong error return in rxrpc_connect_call()
Previous releases - regressions:
- bluetooth: hci_sync: fix use of HCI_OP_LE_READ_BUFFER_SIZE_V2
- wifi:
- mac80211: fix crashes on Rx due to incorrect initialization of
rx->link and rx->link_sta
- mac80211: fix bugs in iTXQ conversion - Tx stalls, incorrect
aggregation handling, crashes
- brcmfmac: fix regression for Broadcom PCIe wifi devices
- rndis_wlan: prevent buffer overflow in rndis_query_oid
- netfilter: conntrack: handle tcp challenge acks during connection
reuse
- sched: avoid grafting on htb_destroy_class_offload when destroying
- virtio-net: correctly enable callback during start_xmit, fix stalls
- tcp: avoid the lookup process failing to get sk in ehash table
- ipa: disable ipa interrupt during suspend
- eth: stmmac: enable all safety features by default
Previous releases - always broken:
- bpf:
- fix pointer-leak due to insufficient speculative store bypass
mitigation (Spectre v4)
- skip task with pid=1 in send_signal_common() to avoid a splat
- fix BPF program ID information in BPF_AUDIT_UNLOAD as well as
PERF_BPF_EVENT_PROG_UNLOAD events
- fix potential deadlock in htab_lock_bucket from same bucket index
but different map_locked index
- bluetooth:
- fix a buffer overflow in mgmt_mesh_add()
- hci_qca: fix driver shutdown on closed serdev
- ISO: fix possible circular locking dependency
- CIS: hci_event: fix invalid wait context
- wifi: brcmfmac: fixes for survey dump handling
- mptcp: explicitly specify sock family at subflow creation time
- netfilter: nft_payload: incorrect arithmetics when fetching VLAN
header bits
- tcp: fix rate_app_limited to default to 1
- l2tp: close all race conditions in l2tp_tunnel_register()
- eth: mlx5: fixes for QoS config and eswitch configuration
- eth: enetc: avoid deadlock in enetc_tx_onestep_tstamp()
- eth: stmmac: fix invalid call to mdiobus_get_phy()
Misc:
- ethtool: add netlink attr in rss get reply only if the value is
not empty
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=F3be
-----END PGP SIGNATURE-----
Merge tag 'net-6.2-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless, bluetooth, bpf and netfilter.
Current release - regressions:
- Revert "net: team: use IFF_NO_ADDRCONF flag to prevent ipv6
addrconf", fix nsna_ping mode of team
- wifi: mt76: fix bugs in Rx queue handling and DMA mapping
- eth: mlx5:
- add missing mutex_unlock in error reporter
- protect global IPsec ASO with a lock
Current release - new code bugs:
- rxrpc: fix wrong error return in rxrpc_connect_call()
Previous releases - regressions:
- bluetooth: hci_sync: fix use of HCI_OP_LE_READ_BUFFER_SIZE_V2
- wifi:
- mac80211: fix crashes on Rx due to incorrect initialization of
rx->link and rx->link_sta
- mac80211: fix bugs in iTXQ conversion - Tx stalls, incorrect
aggregation handling, crashes
- brcmfmac: fix regression for Broadcom PCIe wifi devices
- rndis_wlan: prevent buffer overflow in rndis_query_oid
- netfilter: conntrack: handle tcp challenge acks during connection
reuse
- sched: avoid grafting on htb_destroy_class_offload when destroying
- virtio-net: correctly enable callback during start_xmit, fix stalls
- tcp: avoid the lookup process failing to get sk in ehash table
- ipa: disable ipa interrupt during suspend
- eth: stmmac: enable all safety features by default
Previous releases - always broken:
- bpf:
- fix pointer-leak due to insufficient speculative store bypass
mitigation (Spectre v4)
- skip task with pid=1 in send_signal_common() to avoid a splat
- fix BPF program ID information in BPF_AUDIT_UNLOAD as well as
PERF_BPF_EVENT_PROG_UNLOAD events
- fix potential deadlock in htab_lock_bucket from same bucket
index but different map_locked index
- bluetooth:
- fix a buffer overflow in mgmt_mesh_add()
- hci_qca: fix driver shutdown on closed serdev
- ISO: fix possible circular locking dependency
- CIS: hci_event: fix invalid wait context
- wifi: brcmfmac: fixes for survey dump handling
- mptcp: explicitly specify sock family at subflow creation time
- netfilter: nft_payload: incorrect arithmetics when fetching VLAN
header bits
- tcp: fix rate_app_limited to default to 1
- l2tp: close all race conditions in l2tp_tunnel_register()
- eth: mlx5: fixes for QoS config and eswitch configuration
- eth: enetc: avoid deadlock in enetc_tx_onestep_tstamp()
- eth: stmmac: fix invalid call to mdiobus_get_phy()
Misc:
- ethtool: add netlink attr in rss get reply only if the value is not
empty"
* tag 'net-6.2-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (88 commits)
Revert "Merge branch 'octeontx2-af-CPT'"
tcp: fix rate_app_limited to default to 1
bnxt: Do not read past the end of test names
net: stmmac: enable all safety features by default
octeontx2-af: add mbox to return CPT_AF_FLT_INT info
octeontx2-af: update cpt lf alloc mailbox
octeontx2-af: restore rxc conf after teardown sequence
octeontx2-af: optimize cpt pf identification
octeontx2-af: modify FLR sequence for CPT
octeontx2-af: add mbox for CPT LF reset
octeontx2-af: recover CPT engine when it gets fault
net: dsa: microchip: ksz9477: port map correction in ALU table entry register
selftests/net: toeplitz: fix race on tpacket_v3 block close
net/ulp: use consistent error code when blocking ULP
octeontx2-pf: Fix the use of GFP_KERNEL in atomic context on rt
tcp: avoid the lookup process failing to get sk in ehash table
Revert "net: team: use IFF_NO_ADDRCONF flag to prevent ipv6 addrconf"
MAINTAINERS: add networking entries for Willem
net: sched: gred: prevent races when adding offloads to stats
l2tp: prevent lockdep issue in l2tp_tunnel_register()
...
Merge an ACPI PRM (platform runtime) support fix and an ACPI backlight
quirk for 6.2-rc5:
- Check whether EFI runtime is available when registering the ACPI PRM
address space handler and when running it (Ard Biesheuvel).
- Add backlight=native DMI quirk for Acer Aspire 4810T to the ACPI
video driver (Hans de Goede).
* acpi-prm:
ACPI: PRM: Check whether EFI runtime is available
* acpi-video:
ACPI: video: Add backlight=native DMI quirk for Acer Aspire 4810T
IORING_SETUP_R_DISABLED rings don't have the submitter task set, so
it's not always safe to use ->submitter_task. Disallow posting msg_ring
messaged to disabled rings. Also add task NULL check for loosy sync
around testing for IORING_SETUP_R_DISABLED.
Cc: stable@vger.kernel.org
Fixes: 6d043ee116 ("io_uring: do msg_ring in target task via tw")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is a couple of problems with queueing a tw in io_msg_ring_data()
for remote execution. First, once we queue it the target ring can
go away and so setting IORING_SQ_TASKRUN there is not safe. Secondly,
the userspace might not expect IORING_SQ_TASKRUN.
Extract a helper and uniformly use TWA_SIGNAL without TWA_SIGNAL_NO_IPI
tricks for now, just as it was done in the original patch.
Cc: stable@vger.kernel.org
Fixes: 6d043ee116 ("io_uring: do msg_ring in target task via tw")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This reverts commit b4fbf0b27f, reversing
changes made to 6c977c5c2e.
This seems like net-next material.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- fix controller shutdown regression in nvme-apple (Janne Grunau)
- fix a polling on timeout regression in nvme-pci (Keith Busch)
-----BEGIN PGP SIGNATURE-----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=u9Pc
-----END PGP SIGNATURE-----
Merge tag 'nvme-6.2-2023-01-20' of git://git.infradead.org/nvme into block-6.2
Pull NVMe fixes from Christoph:
"nvme fixes for Linux 6.2
- fix controller shutdown regression in nvme-apple (Janne Grunau)
- fix a polling on timeout regression in nvme-pci (Keith Busch)"
* tag 'nvme-6.2-2023-01-20' of git://git.infradead.org/nvme:
nvme-pci: fix timeout request state check
nvme-apple: only reset the controller when RTKit is running
nvme-apple: reset controller during shutdown
The USB_DEVICE_ID_CODEMERCS_IOW100 header size was incorrect, it should
be 12, not 13.
Cc: stable <stable@kernel.org>
Fixes: 17a8271658 ("USB: iowarrior: fix up report size handling for some devices")
Reported-by: Christoph Jung <jung@codemercs.com>
Link: https://lore.kernel.org/r/20230120135330.3842518-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit ca07e1c1e4 ("drivers:usb:fsl:Make fsl ehci drv an independent
driver module") changed DRV_NAME which was used for MODULE_ALIAS as well.
Starting from this the module alias didn't match the platform device
name created in fsl-mph-dr-of.c
Change DRV_NAME to match the driver name for host mode in fsl-mph-dr-of.
This is needed for module autoloading on ls1021a.
Fixes: ca07e1c1e4 ("drivers:usb:fsl:Make fsl ehci drv an independent driver module")
Cc: stable <stable@kernel.org>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20230120122714.3848784-1-alexander.stein@ew.tq-group.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The initial default value of 0 for tp->rate_app_limited was incorrect,
since a flow is indeed application-limited until it first sends
data. Fixing the default to be 1 is generally correct but also
specifically will help user-space applications avoid using the initial
tcpi_delivery_rate value of 0 that persists until the connection has
some non-zero bandwidth sample.
Fixes: eb8329e0a0 ("tcp: export data delivery rate")
Suggested-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David Morley <morleyd@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Tested-by: David Morley <morleyd@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test names were being concatenated based on a offset beyond the end of
the first name, which tripped the buffer overflow detection logic:
detected buffer overflow in strnlen
[...]
Call Trace:
bnxt_ethtool_init.cold+0x18/0x18
Refactor struct hwrm_selftest_qlist_output to use an actual array,
and adjust the concatenation to use snprintf() rather than a series of
strncat() calls.
Reported-by: Niklas Cassel <Niklas.Cassel@wdc.com>
Link: https://lore.kernel.org/lkml/Y8F%2F1w1AZTvLglFX@x1-carbon/
Tested-by: Niklas Cassel <Niklas.Cassel@wdc.com>
Fixes: eb51365846 ("bnxt_en: Add basic ethtool -t selftest support.")
Cc: Michael Chan <michael.chan@broadcom.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for Sealevel 7xxxC serial cards.
This patch:
* Adds IDs to recognize 7xxxC cards from Sealevel Systems.
* Updates exar_pci_probe() to set nr_ports to last two bytes of primary
dev ID for these cards.
Signed-off-by: Matthew Howell <matthew.howell@sealevel.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2301191440010.22558@tstest-VirtualBox
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The srcvm parameter of qcom_scm_assign_mem is a pointer to a bitfield of
VMIDs. The bitfield is updated with which VMIDs have permissions
after the qcom_scm_assign_mem call. This makes it simpler for clients to
make qcom_scm_assign_mem calls later, they always pass in same srcvm
bitfield and do not need to closely track whether memory was originally
shared.
When restoring permissions to HLOS, fastrpc is incorrectly using the
first VMID directly -- neither the BIT nor the other possible VMIDs the
memory was already assigned to. We already have a field intended for
this purpose: "perms" in the struct fastrpc_channel_ctx, but it was
never used. Start using the perms field.
Cc: Abel Vesa <abel.vesa@linaro.org>
Cc: Vamsi Krishna Gattupalli <quic_vgattupa@quicinc.com>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Fixes: e90d911906 ("misc: fastrpc: Add support to secure memory map")
Fixes: 0871561055 ("misc: fastrpc: Add support for audiopd")
Fixes: 532ad70c6d ("misc: fastrpc: Add mmap request assigning for static PD pool")
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Elliot Berman <quic_eberman@quicinc.com>
drivers/misc/fastrpc.c | 15 ++++++---------
1 file changed, 6 insertions(+), 9 deletions(-)
Link: https://lore.kernel.org/r/20230112182313.521467-1-quic_eberman@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We can get EFI variables without fetching the attribute, so we must
allow for that in gsmi.
commit 859748255b ("efi: pstore: Omit efivars caching EFI varstore
access layer") added a new get_variable call with attr=NULL, which
triggers panic in gsmi.
Fixes: 74c5b31c66 ("driver: Google EFI SMI")
Cc: stable <stable@kernel.org>
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
Link: https://lore.kernel.org/r/20230118010212.1268474-1-khazhy@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is possible that in between calling fastrpc_map_get() until
map->fl->lock is taken in fastrpc_free_map(), another thread can call
fastrpc_map_lookup() and get a reference to a map that is about to be
deleted.
Rewrite fastrpc_map_get() to only increase the reference count of a map
if it's non-zero. Propagate this to callers so they can know if a map is
about to be deleted.
Fixes this warning:
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 5 PID: 10100 at lib/refcount.c:25 refcount_warn_saturate
...
Call trace:
refcount_warn_saturate
[fastrpc_map_get inlined]
[fastrpc_map_lookup inlined]
fastrpc_map_create
fastrpc_internal_invoke
fastrpc_device_ioctl
__arm64_sys_ioctl
invoke_syscall
Fixes: c68cfb718c ("misc: fastrpc: Add support for context Invoke method")
Cc: stable <stable@kernel.org>
Signed-off-by: Ola Jeppsson <ola@snap.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221124174941.418450-4-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Do not remove the map from the list on error path in
fastrpc_init_create_process, instead call fastrpc_map_put, to avoid
use-after-free. Do not remove it on fastrpc_device_release either,
call fastrpc_map_put instead.
The fastrpc_free_map is the only proper place to remove the map.
This is called only after the reference count is 0.
Fixes: b49f6d83e2 ("misc: fastrpc: Fix a possible double free")
Cc: stable <stable@kernel.org>
Co-developed-by: Ola Jeppsson <ola@snap.com>
Signed-off-by: Ola Jeppsson <ola@snap.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221124174941.418450-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, there is a race window between the point when the mutex is
unlocked in fastrpc_map_lookup and the reference count increasing
(fastrpc_map_get) in fastrpc_map_find, which can also lead to
use-after-free.
So lets merge fastrpc_map_find into fastrpc_map_lookup which allows us
to both protect the maps list by also taking the &fl->lock spinlock and
the reference count, since the spinlock will be released only after.
Add take_ref argument to make this suitable for all callers.
Fixes: 8f6c1d8c4f ("misc: fastrpc: Add fdlist implementation")
Cc: stable <stable@kernel.org>
Co-developed-by: Ola Jeppsson <ola@snap.com>
Signed-off-by: Ola Jeppsson <ola@snap.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221124174941.418450-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "err" variable shadows an earlier global variable so this code
returns success instead of a negative error code.
Fixes: 532ad70c6d ("misc: fastrpc: Add mmap request assigning for static PD pool")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/Y4XUrMETCl1O6t0A@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add Meteor Lake Point M device id.
Cc: <stable@vger.kernel.org>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20221212220247.286019-2-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Unconditional call to mei_cl_unlink in mei_cl_bus_dev_release leads
to call of the mei_cl_unlink without corresponding mei_cl_link.
This leads to miscalculation of open_handle_count (decrease without
increase).
Call unlink in mei_cldev_enable fail path and remove blanket unlink
from mei_cl_bus_dev_release.
Fixes: 34f1166afd ("mei: bus: need to unlink client before freeing")
Cc: <stable@vger.kernel.org>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Reviewed-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20221212220247.286019-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This contains fixes for a rare boot hang issue that has been reported
on the db820c dragonboard.
- dt-bindings: interconnect: Add UFS clocks to MSM8996 A2NoC
- interconnect: qcom: msm8996: Provide UFS clocks to A2NoC
- interconnect: qcom: msm8996: Fix regmap max_register values
- interconnect: qcom: rpm: Use _optional func for provider clocks
Signed-off-by: Georgi Djakov <djakov@kernel.org>
-----BEGIN PGP SIGNATURE-----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=5D8l
-----END PGP SIGNATURE-----
Merge tag 'icc-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-linus
Georgi writes:
interconnect fixes for v6.2-rc
This contains fixes for a rare boot hang issue that has been reported
on the db820c dragonboard.
- dt-bindings: interconnect: Add UFS clocks to MSM8996 A2NoC
- interconnect: qcom: msm8996: Provide UFS clocks to A2NoC
- interconnect: qcom: msm8996: Fix regmap max_register values
- interconnect: qcom: rpm: Use _optional func for provider clocks
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
interconnect: qcom: rpm: Use _optional func for provider clocks
interconnect: qcom: msm8996: Fix regmap max_register values
interconnect: qcom: msm8996: Provide UFS clocks to A2NoC
dt-bindings: interconnect: Add UFS clocks to MSM8996 A2NoC
This reverts commit f24771b62a as it is
reported to break the build.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/202301200130.ttBiTzfO-lkp@intel.com
Fixes: f24771b62a ("serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler")
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Valentin Caron <valentin.caron@foss.st.com> # V3
Cc: Marek Vasut <marex@denx.de>
Cc: Johan Hovold <johan@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
gcc-13.0.1 reports a type mismatch for two functions:
drivers/firmware/xilinx/zynqmp.c:1228:5: error: conflicting types for 'zynqmp_pm_set_rpu_mode' due to enum/integer mismatch; have 'int(u32, enum rpu_oper_mode)' {aka 'int(unsigned int, enum rpu_oper_mode)'} [-Werror=enum-int-mismatch]
1228 | int zynqmp_pm_set_rpu_mode(u32 node_id, enum rpu_oper_mode rpu_mode)
| ^~~~~~~~~~~~~~~~~~~~~~
In file included from drivers/firmware/xilinx/zynqmp.c:25:
include/linux/firmware/xlnx-zynqmp.h:552:5: note: previous declaration of 'zynqmp_pm_set_rpu_mode' with type 'int(u32, u32)' {aka 'int(unsigned int, unsigned int)'}
552 | int zynqmp_pm_set_rpu_mode(u32 node_id, u32 arg1);
| ^~~~~~~~~~~~~~~~~~~~~~
drivers/firmware/xilinx/zynqmp.c:1246:5: error: conflicting types for 'zynqmp_pm_set_tcm_config' due to enum/integer mismatch; have 'int(u32, enum rpu_tcm_comb)' {aka 'int(unsigned int, enum rpu_tcm_comb)'} [-Werror=enum-int-mismatch]
1246 | int zynqmp_pm_set_tcm_config(u32 node_id, enum rpu_tcm_comb tcm_mode)
| ^~~~~~~~~~~~~~~~~~~~~~~~
include/linux/firmware/xlnx-zynqmp.h:553:5: note: previous declaration of 'zynqmp_pm_set_tcm_config' with type 'int(u32, u32)' {aka 'int(unsigned int, unsigned int)'}
553 | int zynqmp_pm_set_tcm_config(u32 node_id, u32 arg1);
| ^~~~~~~~~~~~~~~~~~~~~~~~
Change the declaration in the header to match the function definition.
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
It contains:
- fix the clock provided via DT for DDR controller on SAM9X60
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTsZ8eserC1pmhwqDmejrg/N2X7/QUCY8kW6wAKCRCejrg/N2X7
/W+HAQCZreNe8nCBX9JqGzUjPlLw2Gz35a42i6LxlBpIL+jeWwD+P4x2lVwO3lLB
Kf1eFRE3aKV3Xs9dVMmp6QTD7MchkgU=
=SMKY
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=bkxS
-----END PGP SIGNATURE-----
Merge tag 'at91-fixes-6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/fixes
AT91 fixes for 6.2:
It contains:
- fix the clock provided via DT for DDR controller on SAM9X60
* tag 'at91-fixes-6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: at91: sam9x60: fix the ddr clock for sam9x60
Link: https://lore.kernel.org/r/20230119112101.42045-1-claudiu.beznea@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In the original implementation of dwmac5
commit 8bf993a587 ("net: stmmac: Add support for DWMAC5 and implement Safety Features")
all safety features were enabled by default.
Later it seems some implementations didn't have support for all the
features, so in
commit 5ac712dcdf ("net: stmmac: enable platform specific safety features")
the safety_feat_cfg structure was added to the callback and defined for
some platforms to selectively enable these safety features.
The problem is that only certain platforms were given that software
support. If the automotive safety package bit is set in the hardware
features register the safety feature callback is called for the platform,
and for platforms that didn't get a safety_feat_cfg defined this results
in the following NULL pointer dereference:
[ 7.933303] Call trace:
[ 7.935812] dwmac5_safety_feat_config+0x20/0x170 [stmmac]
[ 7.941455] __stmmac_open+0x16c/0x474 [stmmac]
[ 7.946117] stmmac_open+0x38/0x70 [stmmac]
[ 7.950414] __dev_open+0x100/0x1dc
[ 7.954006] __dev_change_flags+0x18c/0x204
[ 7.958297] dev_change_flags+0x24/0x6c
[ 7.962237] do_setlink+0x2b8/0xfa4
[ 7.965827] __rtnl_newlink+0x4ec/0x840
[ 7.969766] rtnl_newlink+0x50/0x80
[ 7.973353] rtnetlink_rcv_msg+0x12c/0x374
[ 7.977557] netlink_rcv_skb+0x5c/0x130
[ 7.981500] rtnetlink_rcv+0x18/0x2c
[ 7.985172] netlink_unicast+0x2e8/0x340
[ 7.989197] netlink_sendmsg+0x1a8/0x420
[ 7.993222] ____sys_sendmsg+0x218/0x280
[ 7.997249] ___sys_sendmsg+0xac/0x100
[ 8.001103] __sys_sendmsg+0x84/0xe0
[ 8.004776] __arm64_sys_sendmsg+0x24/0x30
[ 8.008983] invoke_syscall+0x48/0x114
[ 8.012840] el0_svc_common.constprop.0+0xcc/0xec
[ 8.017665] do_el0_svc+0x38/0xb0
[ 8.021071] el0_svc+0x2c/0x84
[ 8.024212] el0t_64_sync_handler+0xf4/0x120
[ 8.028598] el0t_64_sync+0x190/0x194
Go back to the original behavior, if the automotive safety package
is found to be supported in hardware enable all the features unless
safety_feat_cfg is passed in saying this particular platform only
supports a subset of the features.
Fixes: 5ac712dcdf ("net: stmmac: enable platform specific safety features")
Reported-by: Ning Cai <ncai@quicinc.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Srujana Challa says:
====================
octeontx2-af: Miscellaneous changes for CPT
This patchset consists of miscellaneous changes for CPT.
- Adds a new mailbox to reset the requested CPT LF.
- Modify FLR sequence as per HW team suggested.
- Adds support to recover CPT engines when they gets fault.
- Updates CPT inbound inline IPsec configuration mailbox,
as per new generation of the OcteonTX2 chips.
- Adds a new mailbox to return CPT FLT Interrupt info.
---
v2:
- Addressed a review comment.
v1:
- Dropped patch "octeontx2-af: Fix interrupt name strings completely"
to submit to net.
---
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
CPT HW would trigger the CPT AF FLT interrupt when CPT engines
hits some uncorrectable errors and AF is the one which receives
the interrupt and recovers the engines.
This patch adds a mailbox for CPT VFs to request for CPT faulted
and recovered engines info.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The CN10K CPT coprocessor contains a context processor
to accelerate updates to the IPsec security association
contexts. The context processor contains a context cache.
This patch updates CPT LF ALLOC mailbox to config ctx_ilen
requested by VFs. CPT_LF_ALLOC:ctx_ilen is the size of
initial context fetch.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
CN10K CPT coprocessor includes a component named RXC which
is responsible for reassembly of inner IP packets. RXC has
the feature to evict oldest entries based on age/threshold.
The age/threshold is being set to minimum values to evict
all entries at the time of teardown.
This patch adds code to restore timeout and threshold config
after teardown sequence is complete as it is global config.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Optimize CPT PF identification in mbox handling for faster
mbox response by doing it at AF driver probe instead of
every mbox message.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On OcteonTX2 platform CPT instruction enqueue is only
possible via LMTST operations.
The existing FLR sequence mentioned in HRM requires
a dummy LMTST to CPT but LMTST can't be submitted from
AF driver. So, HW team provided a new sequence to avoid
dummy LMTST. This patch adds code for the same.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On OcteonTX2 SoC, the admin function (AF) is the only one with all
priviliges to configure HW and alloc resources, PFs and it's VFs
have to request AF via mailbox for all their needs.
This patch adds a new mailbox for CPT VFs to request for CPT LF
reset.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When CPT engine has uncorrectable errors, it will get halted and
must be disabled and re-enabled. This patch adds code for the same.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kconfig fix for panfrost and two fixes for i915 and fb-helper to
address some bugs with vga-switcheroo.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCY8j9NQAKCRDj7w1vZxhR
xYDhAP4mPeqkQWEcKD0KOxd+vG3khWTcB8BrHS8gJfxZgDVUxQEA5hsRluQ9MsNV
o1Q/qYvpAJzNYKJiPkff/SCOuy8JpQE=
=1LL3
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2023-01-19' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
A fix for vc4 to address a memory leak when allocating a buffer, a
Kconfig fix for panfrost and two fixes for i915 and fb-helper to
address some bugs with vga-switcheroo.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230119082059.h32bs7zqoxmjbcvn@houat
- Prevent reading into undefined memory in the expression lexer,
accounting for a trailer backslash followed by the null byte.
- Fix file mode when copying files to the build id cache, the problem
happens when the cache directory is in a different file system than the
file being cached, otherwise the mode was preserved as only a hard link
would be done to save space.
- Fix a related build-id 'perf test' entry that checked that permission
when caching PE (Portable Executable) files, used when profiling
Windows executables under wine.
- Sync the tools/ copies of kvm headers, build_bug.h, socket.h and
arm64's cputype.h with the kernel sources.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCY8l5UgAKCRCyPKLppCJ+
J5eQAP4o2h70ULZ6m7/AFDCG5GW/wAIKgsBmEwPQQcKNWY19QQD6AsSszQ8pu4Ct
q65WT0qvpaSFA1KdrAWJenaVrkJCrwk=
=MUmJ
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v6.2-3-2023-01-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Prevent reading into undefined memory in the expression lexer,
accounting for a trailer backslash followed by the null byte.
- Fix file mode when copying files to the build id cache, the problem
happens when the cache directory is in a different file system than
the file being cached, otherwise the mode was preserved as only a
hard link would be done to save space.
- Fix a related build-id 'perf test' entry that checked that permission
when caching PE (Portable Executable) files, used when profiling
Windows executables under wine.
- Sync the tools/ copies of kvm headers, build_bug.h, socket.h and
arm64's cputype.h with the kernel sources.
* tag 'perf-tools-fixes-for-v6.2-3-2023-01-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf test build-id: Fix test check for PE file
perf buildid-cache: Fix the file mode with copyfile() while adding file to build-id cache
perf expr: Prevent normalize() from reading into undefined memory in the expression lexer
tools headers: Syncronize linux/build_bug.h with the kernel sources
perf beauty: Update copy of linux/socket.h with the kernel sources
tools headers arm64: Sync arm64's cputype.h with the kernel sources
tools kvm headers arm64: Update KVM header from the kernel sources
tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources
tools headers UAPI: Sync linux/kvm.h with the kernel sources
msm-fixes for v6.3-rc5
Two GPU fixes which were meant to be part of the previous pull request,
but I'd forgotten to fetch from gitlab after the MR was merged so that
git tag was applied to the wrong commit.
- kexec shutdown fix
- fix potential double free
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGskguoVsz2wqAK2k+f32LwcVY5JC6+e2RwLqZswz3RY2Q@mail.gmail.com
- Workaround invalid gcc-11 out of bounds read warning caused by s390's
S390_lowcore definition. This happens only with gcc 11.1.0 and 11.2.0.
The code which causes this warning will be gone with the next merge
window. Therefore just replace the memcpy() with a for loop to get rid of
the warning.
-----BEGIN PGP SIGNATURE-----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=XnbT
-----END PGP SIGNATURE-----
Merge tag 's390-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 build fix from Heiko Carstens:
- Workaround invalid gcc-11 out of bounds read warning caused by s390's
S390_lowcore definition. This happens only with gcc 11.1.0 and
11.2.0.
The code which causes this warning will be gone with the next merge
window. Therefore just replace the memcpy() with a for loop to get
rid of the warning.
* tag 's390-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: workaround invalid gcc-11 out of bounds read warning
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEjUuTAak14xi+SF7M4CHKc/GJqRAFAmPJEEYACgkQ4CHKc/GJ
qRD7HwgApZ8UyimDo5zUGOgV7wAgOsNNAYTxB6r/JacYcukVOHRlcPKvvNbWrFZI
xj6R7/jSTERE8Fdep91t3v6bD/YrALBHbx71vQdATD4M3LJUexqzhVRdsVy9Sd1f
QUJ+dgcsP/YGQiBJ4HYeiOZ5s4PUGDYomjnv8RLPsNX6XuOFW9JJPui39OwuItqo
NBT2Ab/imwH5eTGiI3N7otRkXiKgtQWbPKlfQUQ+eG/oqp9TBRvsuUhCnxdKuM5k
aeIa3daAUrB2A5j137X81bp/7TWvYGwuq8sgCh40X+Q21EoalEJMuoA8VgwpML4m
bmknsEyCfv+3V2c36IPH2BKXgfaYrw==
=HczB
-----END PGP SIGNATURE-----
Merge tag 'slab-for-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fix from Vlastimil Babka:
"Just a single fix, since the lkp report originally for a slub-tiny
commit ended up being a gcov/compiler bug:
- periodically resched in SLAB's drain_freelist(), by David Rientjes"
* tag 'slab-for-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm, slab: periodically resched in drain_freelist()
put_device() shouldn't be called before a prior call to
device_register(). __thermal_cooling_device_register() doesn't follow
that properly and needs fixing. Also
thermal_cooling_device_destroy_sysfs() is getting called unnecessarily
on few error paths.
Fix all this by placing the calls at the right place.
Based on initial work done by Caleb Connolly.
Fixes: 4748f9687c ("thermal: core: fix some possible name leaks in error paths")
Fixes: c408b3d1d9 ("thermal: Validate new state in cur_state_store()")
Reported-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Frank Rowand <frowand.list@gmail.com>
Reviewed-by: Yang Yingliang <yangyingliang@huawei.com>
Tested-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Here are some new device ids, mostly for Quectel modems.
All have been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCY8l4hAAKCRALxc3C7H1l
CAhnAQCtxS5cqMsdWKKACWTEUgwsEU1i6DG7F7jtuc/3A6SE0wD/Q85aBBoMO9iM
z/sX2CfGDx43WR3PgGak754JKN15qg0=
=uNcv
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-6.2-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
"USB-serial fixes for 6.2-rc5
Here are some new device ids, mostly for Quectel modems.
All have been in linux-next with no reported issues."
* tag 'usb-serial-6.2-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add Quectel EM05CN modem
USB: serial: option: add Quectel EM05CN (SG) modem
USB: serial: cp210x: add SCALANCE LPE-9000 device id
USB: serial: option: add Quectel EC200U modem
USB: serial: option: add Quectel EM05-G (RS) modem
USB: serial: option: add Quectel EM05-G (GR) modem
USB: serial: option: add Quectel EM05-G (CS) modem
* A single patch to fix sync write operations to detect and handle
errors due to external zone corruptions resulting in writes at
invalid location, from me.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCY8ifmAAKCRDdoc3SxdoY
dqkXAP4tHVH3mrgtLsne2GsnjEuIl/fhZHf2J6kNDIMaflmoNgEAkWWNku9rn0OQ
sqGZRiMFRrrCSrGas9zy1O/0t26ILQY=
=MuX5
-----END PGP SIGNATURE-----
Merge tag 'zonefs-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs
Pull zonefs fix from Damien Le Moal:
- A single patch to fix sync write operations to detect and handle
errors due to external zone corruptions resulting in writes at
invalid location, from me.
* tag 'zonefs-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
zonefs: Detect append writes at invalid locations
If the target ring is configured with IOPOLL, then we always need to hold
the target ring uring_lock before posting CQEs. We could just grab it
unconditionally, but since we don't expect many target rings to be of this
type, make grabbing the uring_lock conditional on the ring type.
Link: https://lore.kernel.org/io-uring/Y8krlYa52%2F0YGqkg@ip-172-31-85-199.ec2.internal/
Reported-by: Xingyuan Mo <hdthky0@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
ALU table entry 2 register in KSZ9477 have bit positions reserved for
forwarding port map. This field is referred in ksz9477_fdb_del() for
clearing forward port map and alu table.
But current fdb_del refer ALU table entry 3 register for accessing forward
port map. Update ksz9477_fdb_del() to get forward port map from correct
alu table entry register.
With this bug, issue can be observed while deleting static MAC entries.
Delete any specific MAC entry using "bridge fdb del" command. This should
clear all the specified MAC entries. But it is observed that entries with
self static alone are retained.
Tested on LAN9370 EVB since ksz9477_fdb_del() is used common across
LAN937x and KSZ series.
Fixes: b987e98e50 ("dsa: add DSA switch driver for Microchip KSZ9477")
Signed-off-by: Rakesh Sankaranarayanan <rakesh.sankaranarayanan@microchip.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20230118174735.702377-1-rakesh.sankaranarayanan@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Avoid race between process wakeup and tpacket_v3 block timeout.
The test waits for cfg_timeout_msec for packets to arrive. Packets
arrive in tpacket_v3 rings, which pass packets ("frames") to the
process in batches ("blocks"). The sk waits for req3.tp_retire_blk_tov
msec to release a block.
Set the block timeout lower than the process waiting time, else
the process may find that no block has been released by the time it
scans the socket list. Convert to a ring of more than one, smaller,
blocks with shorter timeouts. Blocks must be page aligned, so >= 64KB.
Fixes: 5ebfb4cc30 ("selftests/net: toeplitz test")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20230118151847.4124260-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The referenced commit changed the error code returned by the kernel
when preventing a non-established socket from attaching the ktls
ULP. Before to such a commit, the user-space got ENOTCONN instead
of EINVAL.
The existing self-tests depend on such error code, and the change
caused a failure:
RUN global.non_established ...
tls.c:1673:non_established:Expected errno (22) == ENOTCONN (107)
non_established: Test failed at step #3
FAIL global.non_established
In the unlikely event existing applications do the same, address
the issue by restoring the prior error code in the above scenario.
Note that the only other ULP performing similar checks at init
time - smc_ulp_ops - also fails with ENOTCONN when trying to attach
the ULP to a non-established socket.
Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Fixes: 2c02d41d71 ("net/ulp: prevent ULP without clone op from entering the LISTEN status")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/7bb199e7a93317fb6f8bf8b9b2dc71c18f337cde.1674042685.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In test_async_probe_init, second set of asynchronous devices are saved
in sync_dev[sync_id], which should be async_dev[async_id].
This makes these devices not unregistered when exit.
> modprobe test_async_driver_probe && \
> modprobe -r test_async_driver_probe && \
> modprobe test_async_driver_probe
...
> sysfs: cannot create duplicate filename '/devices/platform/test_async_driver.4'
> kobject_add_internal failed for test_async_driver.4 with -EEXIST,
don't try to register things with the same name in the same directory.
Fixes: 57ea974fb8 ("driver core: Rewrite test_async_driver_probe to cover serialization and NUMA affinity")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Link: https://lore.kernel.org/r/20221125063541.241328-1-chenzhongjin@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
