Add the core SCMI notifications protocol-registration support: allow
protocols to register their own set of supported events, during their
initialization phase. Notification core can track multiple platform
instances by their handles.
Link: https://lore.kernel.org/r/20200701155348.52864-2-cristian.marussi@arm.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
When, at probe time, an SCMI communication failure inhibits the capacity
to query power domains states, such domains should be skipped.
Registering partially initialized SCMI power domains with genpd will
causes kernel panic.
arm-scmi timed out in resp(caller: scmi_power_state_get+0xa4/0xd0)
scmi-power-domain scmi_dev.2: failed to get state for domain 9
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Mem abort info:
ESR = 0x96000006
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000006
CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=00000009f3691000
[0000000000000000] pgd=00000009f1ca0003, p4d=00000009f1ca0003, pud=00000009f35ea003, pmd=0000000000000000
Internal error: Oops: 96000006 [#1] PREEMPT SMP
CPU: 2 PID: 381 Comm: bash Not tainted 5.8.0-rc1-00011-gebd118c2cca8 #2
Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform, BIOS EDK II Jan 3 2020
Internal error: Oops: 96000006 [#1] PREEMPT SMP
pstate: 80000005 (Nzcv daif -PAN -UAO BTYPE=--)
pc : of_genpd_add_provider_onecell+0x98/0x1f8
lr : of_genpd_add_provider_onecell+0x48/0x1f8
Call trace:
of_genpd_add_provider_onecell+0x98/0x1f8
scmi_pm_domain_probe+0x174/0x1e8
scmi_dev_probe+0x90/0xe0
really_probe+0xe4/0x448
driver_probe_device+0xfc/0x168
device_driver_attach+0x7c/0x88
bind_store+0xe8/0x128
drv_attr_store+0x2c/0x40
sysfs_kf_write+0x4c/0x60
kernfs_fop_write+0x114/0x230
__vfs_write+0x24/0x50
vfs_write+0xbc/0x1e0
ksys_write+0x70/0xf8
__arm64_sys_write+0x24/0x30
el0_svc_common.constprop.3+0x94/0x160
do_el0_svc+0x2c/0x98
el0_sync_handler+0x148/0x1a8
el0_sync+0x158/0x180
Do not register any power domain that failed to be queried with genpd.
Fixes: 898216c97e ("firmware: arm_scmi: add device power domain support using genpd")
Link: https://lore.kernel.org/r/20200619220330.12217-1-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Commit e5bfb21d98 ("firmware: smccc: Add HAVE_ARM_SMCCC_DISCOVERY to
identify SMCCC v1.1 and above") introduced new config option to identify
the availability of SMCCC discoverability of version and features
transparently hiding the indirect dependency on ARM_PSCI_FW.
Commit 5a897e3ab4 ("firmware: arm_scmi: fix psci dependency") just
worked around the build dependency making SCMI SMC/HVC transport depend
on ARM_PSCI_FW at the time. Since it really just relies on SMCCC directly
and not on ARM_PSCI_FW, let us move to use CONFIG_HAVE_ARM_SMCCC_DISCOVERY
instead of CONFIG_ARM_PSCI_FW.
Link: https://lore.kernel.org/r/20200625101937.51939-1-sudeep.holla@arm.com
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Add a new fast_switch_possible interface to the existing perf_ops to
export the information of whether or not fast_switch is possible for a
given device.
This can be used by the cpufreq driver and framework to choose proper
mechanism for frequency change.
Link: https://lore.kernel.org/r/20200617094332.8391-1-nicola.mazzucato@arm.com
Suggested-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Nicola Mazzucato <nicola.mazzucato@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Currently the trace event 'scmi_xfer_end' reports the status of the
transfer using the unsigned status field read from the firmware which
may not be easy to interpret. It may also miss to emit any timeouts
that happen in the driver resulting in emitting garbage in the status
field in those scenarios.
Let us use signed integer so that error values are emitted out after
they are mapped from firmware error formats to standard linux error
codes. While at this, also include any timeouts in the driver itself.
Link: https://lore.kernel.org/r/20200609134503.55860-1-sudeep.holla@arm.com
Cc: Jim Quinlan <james.quinlan@broadcom.com>
Cc: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Here are a couple of bug fixes, mostly for devicetree files
NXP i.MX:
- Use correct voltage on some i.MX8M board device trees to
avoid hardware damage
- Code fixes for a compiler warning and incorrect reference
counting, both harmless.
- Fix the i.MX8M SoC driver to correctly identify imx8mp
- Fix watchdog configuration in imx6ul-kontron device tree.
Broadcom:
- A small regression fix for the Raspberry-Pi firmware driver
- A Kconfig change to use the correct timer driver on Northstar
- A DT fix for the Luxul XWC-2000 machine
- Two more DT fixes for NSP SoCs
STmicroelectronics STI
- Revert one broken patch for L2 cache configuration
ARM Versatile Express:
- Fix a regression by reverting a broken DT cleanup
TEE drivers:
- MAINTAINERS: change tee mailing list
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=P5b/
-----END PGP SIGNATURE-----
Merge tag 'arm-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Here are a couple of bug fixes, mostly for devicetree files
NXP i.MX:
- Use correct voltage on some i.MX8M board device trees to avoid
hardware damage
- Code fixes for a compiler warning and incorrect reference counting,
both harmless.
- Fix the i.MX8M SoC driver to correctly identify imx8mp
- Fix watchdog configuration in imx6ul-kontron device tree.
Broadcom:
- A small regression fix for the Raspberry-Pi firmware driver
- A Kconfig change to use the correct timer driver on Northstar
- A DT fix for the Luxul XWC-2000 machine
- Two more DT fixes for NSP SoCs
STmicroelectronics STI
- Revert one broken patch for L2 cache configuration
ARM Versatile Express:
- Fix a regression by reverting a broken DT cleanup
TEE drivers:
- MAINTAINERS: change tee mailing list"
* tag 'arm-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
Revert "ARM: sti: Implement dummy L2 cache's write_sec"
soc: imx8m: fix build warning
ARM: imx6: add missing put_device() call in imx6q_suspend_init()
ARM: imx5: add missing put_device() call in imx_suspend_alloc_ocram()
soc: imx8m: Correct i.MX8MP UID fuse offset
ARM: dts: imx6ul-kontron: Change WDOG_ANY signal from push-pull to open-drain
ARM: dts: imx6ul-kontron: Move watchdog from Kontron i.MX6UL/ULL board to SoM
arm64: dts: imx8mm-beacon: Fix voltages on LDO1 and LDO2
arm64: dts: imx8mn-ddr4-evk: correct ldo1/ldo2 voltage range
arm64: dts: imx8mm-evk: correct ldo1/ldo2 voltage range
ARM: dts: NSP: Correct FA2 mailbox node
ARM: bcm2835: Fix integer overflow in rpi_firmware_print_firmware_revision()
MAINTAINERS: change tee mailing list
ARM: dts: NSP: Disable PL330 by default, add dma-coherent property
ARM: bcm: Select ARM_TIMER_SP804 for ARCH_BCM_NSP
ARM: dts: BCM5301X: Add missing memory "device_type" for Luxul XWC-2000
arm: dts: vexpress: Move mcc node back into motherboard node
- Robustness fix for TPM log parsing code
- kobject refcount fix for the ESRT parsing code
- Two efivarfs fixes to make it behave more like an ordinary file system
- Style fixup for zero length arrays
- Fix a regression in path separator handling in the initrd loader
- Fix a missing prototype warning
- Add some kerneldoc headers for newly introduced stub routines
- Allow support for SSDT overrides via EFI variables to be disabled
- Report CPU mode and MMU state upon entry for 32-bit ARM
- Use the correct stack pointer alignment when entering from mixed mode
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=F0bv
-----END PGP SIGNATURE-----
Merge tag 'efi-urgent-2020-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fixes from Ingo Molnar:
- Fix build regression on v4.8 and older
- Robustness fix for TPM log parsing code
- kobject refcount fix for the ESRT parsing code
- Two efivarfs fixes to make it behave more like an ordinary file
system
- Style fixup for zero length arrays
- Fix a regression in path separator handling in the initrd loader
- Fix a missing prototype warning
- Add some kerneldoc headers for newly introduced stub routines
- Allow support for SSDT overrides via EFI variables to be disabled
- Report CPU mode and MMU state upon entry for 32-bit ARM
- Use the correct stack pointer alignment when entering from mixed mode
* tag 'efi-urgent-2020-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/libstub: arm: Print CPU boot mode and MMU state at boot
efi/libstub: arm: Omit arch specific config table matching array on arm64
efi/x86: Setup stack correctly for efi_pe_entry
efi: Make it possible to disable efivar_ssdt entirely
efi/libstub: Descriptions for stub helper functions
efi/libstub: Fix path separator regression
efi/libstub: Fix missing-prototype warning for skip_spaces()
efi: Replace zero-length array and use struct_size() helper
efivarfs: Don't return -EINTR when rate-limiting reads
efivarfs: Update inode modification time for successful writes
efi/esrt: Fix reference count leak in esre_create_sysfs_entry.
efi/tpm: Verify event log header before parsing
efi/x86: Fix build with gcc 4
for 5.8, please pull the following:
- Andy provides a fix for the Raspberry Pi firmware driver to print the
correct time upon boot. This is a fallout from a converstion to use
the ptT format
-----BEGIN PGP SIGNATURE-----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=mIdj
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.8/drivers-fixes' of https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM/ARM64/MIPS SoCs drivers fixes
for 5.8, please pull the following:
- Andy provides a fix for the Raspberry Pi firmware driver to print the
correct time upon boot. This is a fallout from a converstion to use
the ptT format
* tag 'arm-soc/for-5.8/drivers-fixes' of https://github.com/Broadcom/stblinux:
ARM: bcm2835: Fix integer overflow in rpi_firmware_print_firmware_revision()
Link: https://lore.kernel.org/r/20200619202250.19029-2-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
When copying the setup_header into the boot_params buffer, only the data
that is actually part of the setup_header should be copied.
efi_pe_entry() currently copies the entire second sector, which
initializes some of the fields in boot_params beyond the setup_header
with garbage (i.e. part of the real-mode boot code gets copied into
those fields).
This does not cause any issues currently because the fields that are
overwritten are padding, BIOS EDD information that won't get used, and
the E820 table which will get properly filled in later.
Fix this to only copy data that is actually part of the setup_header
structure.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Commit
987053a300 ("efi/x86: Move command-line initrd loading to efi_main")
made the ramdisk_addr/ramdisk_size variables in efi_pe_entry unused, but
neglected to delete them.
Delete these unused variables.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Add more cm4 resources, then linux could use cm4's i2c/lpuart and
could kick cm4 core.
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add resource management API, when we have multiple
partition running together, resources not owned to current
partition should not be used.
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The postfix needs to be false. Alought compiler use 0 for postfix now,
and take start_from as 0, it is better we add explicit false to postfix.
Fixes: 705dcca91d0a("firmware: imx: scu-pd: add power domain for I2C and INTMUX in CM40 SS")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The firmware clocks driver was previously probed through a platform_device
created by the firmware driver.
Since we will now have a node for that clocks driver, we need to create the
device only in the case where there's no node for it already.
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/72114c4287ebda2dbd952ea238d4489d359897e5.1592210452.git-series.maxime@cerno.tech
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
IRQF_NO_SUSPEND flag is set for MU IRQ of IPC work, but with this
flag set, IRQD_WAKEUP_ARMED flag will NOT be set during
suspend_device_irq() phase, then when MU IRQ arrives, it will NOT
wake up system from suspend.
To fix this issue, pm_system_wakeup() is called in general MU IRQ
handler to make sure system can be waked up when MU IRQ arrives.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
On 32-bit ARM, we may boot at HYP mode, or with the MMU and caches off
(or both), even though the EFI spec does not actually support this.
While booting at HYP mode is something we might tolerate, fiddling
with the caches is a more serious issue, as disabling the caches is
tricky to do safely from C code, and running without the Dcache makes
it impossible to support unaligned memory accesses, which is another
explicit requirement imposed by the EFI spec.
So take note of the CPU mode and MMU state in the EFI stub diagnostic
output so that we can easily diagnose any issues that may arise from
this. E.g.,
EFI stub: Entering in SVC mode with MMU enabled
Also, capture the CPSR and SCTLR system register values at EFI stub
entry, and after ExitBootServices() returns, and check whether the
MMU and Dcache were disabled at any point. If this is the case, a
diagnostic message like the following will be emitted:
efi: [Firmware Bug]: EFI stub was entered with MMU and Dcache disabled, please fix your firmware!
efi: CPSR at EFI stub entry : 0x600001d3
efi: SCTLR at EFI stub entry : 0x00c51838
efi: CPSR after ExitBootServices() : 0x600001d3
efi: SCTLR after ExitBootServices(): 0x00c50838
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
On arm64, the EFI stub is built into the kernel proper, and so the stub
can refer to its symbols directly. Therefore, the practice of using EFI
configuration tables to pass information between them is never needed,
so we can omit any code consuming such tables when building for arm64.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
time64_t is 64-bit width type, we are not supposed to supply lesser ones
as in the case of rpi_firmware_print_firmware_revision() after the commit
4a60f58ee0 ("ARM: bcm2835: Switch to use %ptT"). Use temporary variable
of time64_t type to correctly handle lesser types.
Fixes: 4a60f58ee0 ("ARM: bcm2835: Switch to use %ptT")
Reported-by: Stefan Wahren <wahrenst@gmx.net>
Reported-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Revieved-by: Petr Mladek <pmladek@suse.com>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Link: https://lore.kernel.org/r/20200616163139.4229-1-andriy.shevchenko@linux.intel.com
In most cases, such as CONFIG_ACPI_CUSTOM_DSDT and
CONFIG_ACPI_TABLE_UPGRADE, boot-time modifications to firmware tables
are tied to specific Kconfig options. Currently this is not the case
for modifying the ACPI SSDT via the efivar_ssdt kernel command line
option and associated EFI variable.
This patch adds CONFIG_EFI_CUSTOM_SSDT_OVERLAYS, which defaults
disabled, in order to allow enabling or disabling that feature during
the build.
Cc: <stable@vger.kernel.org>
Signed-off-by: Peter Jones <pjones@redhat.com>
Link: https://lore.kernel.org/r/20200615202408.2242614-1-pjones@redhat.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Commit 9302c1bb8e ("efi/libstub: Rewrite file I/O routine") introduced a
regression that made a couple of (badly configured) systems fail to
boot [1]: Until 5.6, we silently accepted Unix-style file separators in
EFI paths, which might violate the EFI standard, but are an easy to make
mistake. This fix restores the pre-5.7 behaviour.
[1] https://bbs.archlinux.org/viewtopic.php?id=256273
Fixes: 9302c1bb8e ("efi/libstub: Rewrite file I/O routine")
Signed-off-by: Philipp Fent <fent@in.tum.de>
Link: https://lore.kernel.org/r/20200615115109.7823-1-fent@in.tum.de
[ardb: rewrite as chained if/else statements]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.
Lastly, make use of the sizeof_field() helper instead of an open-coded
version.
This issue was found with the help of Coccinelle and audited _manually_.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200527171425.GA4053@embeddedor
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
kobject_init_and_add() takes reference even when it fails.
If this function returns an error, kobject_put() must be called to
properly clean up the memory associated with the object. Previous
commit "b8eb718348b8" fixed a similar problem.
Fixes: 0bb549052d ("efi: Add esrt support")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Link: https://lore.kernel.org/r/20200528183804.4497-1-wu000273@umn.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Ingo suggested that since the new sched_set_*() functions are
implemented using the 'nocheck' variants, they really shouldn't ever
fail, so remove the return value.
Cc: axboe@kernel.dk
Cc: daniel.lezcano@linaro.org
Cc: sudeep.holla@arm.com
Cc: airlied@redhat.com
Cc: broonie@kernel.org
Cc: paulmck@kernel.org
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Because SCHED_FIFO is a broken scheduler model (see previous patches)
take away the priority field, the kernel can't possibly make an
informed decision.
Effectively changes prio from 99 to 50.
XXX this thing is horrific, it basically open-codes a stop-machine and
idle.
Cc: daniel.lezcano@linaro.org
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Valentin Schneider <valentin.schneider@arm.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Commit
bbf8e8b0fe ("efi/libstub: Optimize for size instead of speed")
changed the optimization level for the EFI stub to -Os from -O2.
Andrey Ignatov reports that this breaks the build with gcc 4.8.5.
Testing on godbolt.org, the combination of -Os,
-fno-asynchronous-unwind-tables, and ms_abi functions doesn't work,
failing with the error:
sorry, unimplemented: ms_abi attribute requires
-maccumulate-outgoing-args or subtarget optimization implying it
This does appear to work with gcc 4.9 onwards.
Add -maccumulate-outgoing-args explicitly to unbreak the build with
pre-4.9 versions of gcc.
Reported-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200605150638.1011637-1-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
- fix build rules in binderfs sample
- fix build errors when Kbuild recurses to the top Makefile
- covert '---help---' in Kconfig to 'help'
-----BEGIN PGP SIGNATURE-----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=1NIT
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- fix build rules in binderfs sample
- fix build errors when Kbuild recurses to the top Makefile
- covert '---help---' in Kconfig to 'help'
* tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
treewide: replace '---help---' in Kconfig files with 'help'
kbuild: fix broken builds because of GZIP,BZIP2,LZOP variables
samples: binderfs: really compile this sample and fix build issues
Since commit 84af7a6194 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.
This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.
There are a variety of indentation styles found.
a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'
In order to convert all of them to 1 tab + 'help', I ran the
following commend:
$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Merge the state of the locking kcsan branch before the read/write_once()
and the atomics modifications got merged.
Squash the fallout of the rebase on top of the read/write once and atomic
fallback work into the merge. The history of the original branch is
preserved in tag locking-kcsan-2020-06-02.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Define a new initializer for the mmap locking api. Initially this just
evaluates to __RWSEM_INITIALIZER as the API is defined as wrappers around
rwsem.
Signed-off-by: Michel Lespinasse <walken@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Liam Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ying Han <yinghan@google.com>
Link: http://lkml.kernel.org/r/20200520052908.204642-9-walken@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The replacement of <asm/pgrable.h> with <linux/pgtable.h> made the include
of the latter in the middle of asm includes. Fix this up with the aid of
the below script and manual adjustments here and there.
import sys
import re
if len(sys.argv) is not 3:
print "USAGE: %s <file> <header>" % (sys.argv[0])
sys.exit(1)
hdr_to_move="#include <linux/%s>" % sys.argv[2]
moved = False
in_hdrs = False
with open(sys.argv[1], "r") as f:
lines = f.readlines()
for _line in lines:
line = _line.rstrip('
')
if line == hdr_to_move:
continue
if line.startswith("#include <linux/"):
in_hdrs = True
elif not moved and in_hdrs:
moved = True
print hdr_to_move
print line
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-4-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The include/linux/pgtable.h is going to be the home of generic page table
manipulation functions.
Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and
make the latter include asm/pgtable.h.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-3-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Here is the large set of char/misc driver patches for 5.8-rc1
Included in here are:
- habanalabs driver updates, loads
- mhi bus driver updates
- extcon driver updates
- clk driver updates (approved by the clock maintainer)
- firmware driver updates
- fpga driver updates
- gnss driver updates
- coresight driver updates
- interconnect driver updates
- parport driver updates (it's still alive!)
- nvmem driver updates
- soundwire driver updates
- visorbus driver updates
- w1 driver updates
- various misc driver updates
In short, loads of different driver subsystem updates along with the
drivers as well.
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXtzkHw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yldOwCgus/DgpnI1UL4z+NdBxJrAXtkPmgAn2sgTUea
i5RblCmcVMqvHaGtYkY+
=tScN
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the large set of char/misc driver patches for 5.8-rc1
Included in here are:
- habanalabs driver updates, loads
- mhi bus driver updates
- extcon driver updates
- clk driver updates (approved by the clock maintainer)
- firmware driver updates
- fpga driver updates
- gnss driver updates
- coresight driver updates
- interconnect driver updates
- parport driver updates (it's still alive!)
- nvmem driver updates
- soundwire driver updates
- visorbus driver updates
- w1 driver updates
- various misc driver updates
In short, loads of different driver subsystem updates along with the
drivers as well.
All have been in linux-next for a while with no reported issues"
* tag 'char-misc-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (233 commits)
habanalabs: correctly cast u64 to void*
habanalabs: initialize variable to default value
extcon: arizona: Fix runtime PM imbalance on error
extcon: max14577: Add proper dt-compatible strings
extcon: adc-jack: Fix an error handling path in 'adc_jack_probe()'
extcon: remove redundant assignment to variable idx
w1: omap-hdq: print dev_err if irq flags are not cleared
w1: omap-hdq: fix interrupt handling which did show spurious timeouts
w1: omap-hdq: fix return value to be -1 if there is a timeout
w1: omap-hdq: cleanup to add missing newline for some dev_dbg
/dev/mem: Revoke mappings when a driver claims the region
misc: xilinx-sdfec: convert get_user_pages() --> pin_user_pages()
misc: xilinx-sdfec: cleanup return value in xsdfec_table_write()
misc: xilinx-sdfec: improve get_user_pages_fast() error handling
nvmem: qfprom: remove incorrect write support
habanalabs: handle MMU cache invalidation timeout
habanalabs: don't allow hard reset with open processes
habanalabs: GAUDI does not support soft-reset
habanalabs: add print for soft reset due to event
habanalabs: improve MMU cache invalidation code
...
Some vendors like HPe or Dell, encode the release version of their BIOS
in the "System BIOS {Major|Minor} Release" fields of Type 0.
This information is used to know which bios release actually runs.
It could be used for some quirks, debugging sessions or inventory tasks.
A typical output for a Dell system running the 65.27 bios is :
[root@t1700 ~]# cat /sys/devices/virtual/dmi/id/bios_release
65.27
[root@t1700 ~]#
Servers that have a BMC encode the release version of their firmware in the
"Embedded Controller Firmware {Major|Minor} Release" fields of Type 0.
This information is used to know which BMC release actually runs.
It could be used for some quirks, debugging sessions or inventory tasks.
A typical output for a Dell system running the 3.75 bmc release is :
[root@t1700 ~]# cat /sys/devices/virtual/dmi/id/ec_firmware_release
3.75
[root@t1700 ~]#
Signed-off-by: Erwan Velu <e.velu@criteo.com>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
These are updates to SoC specific drivers that did not have
another subsystem maintainer tree to go through for some
reason:
- Some bus and memory drivers for the MIPS P5600 based
Baikal-T1 SoC that is getting added through the MIPS tree.
- There are new soc_device identification drivers for TI K3,
Qualcomm MSM8939
- New reset controller drivers for NXP i.MX8MP, Renesas
RZ/G1H, and Hisilicon hi6220
- The SCMI firmware interface can now work across ARM SMC/HVC
as a transport.
- Mediatek platforms now use a new driver for their "MMSYS"
hardware block that controls clocks and some other aspects
in behalf of the media and gpu drivers.
- Some Tegra processors have improved power management
support, including getting woken up by the PMIC and cluster
power down during idle.
- A new v4l staging driver for Tegra is added.
- Cleanups and minor bugfixes for TI, NXP, Hisilicon,
Mediatek, and Tegra.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=44Jc
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM/SoC driver updates from Arnd Bergmann:
"These are updates to SoC specific drivers that did not have another
subsystem maintainer tree to go through for some reason:
- Some bus and memory drivers for the MIPS P5600 based Baikal-T1 SoC
that is getting added through the MIPS tree.
- There are new soc_device identification drivers for TI K3, Qualcomm
MSM8939
- New reset controller drivers for NXP i.MX8MP, Renesas RZ/G1H, and
Hisilicon hi6220
- The SCMI firmware interface can now work across ARM SMC/HVC as a
transport.
- Mediatek platforms now use a new driver for their "MMSYS" hardware
block that controls clocks and some other aspects in behalf of the
media and gpu drivers.
- Some Tegra processors have improved power management support,
including getting woken up by the PMIC and cluster power down
during idle.
- A new v4l staging driver for Tegra is added.
- Cleanups and minor bugfixes for TI, NXP, Hisilicon, Mediatek, and
Tegra"
* tag 'arm-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (155 commits)
clk: sprd: fix compile-testing
bus: bt1-axi: Build the driver into the kernel
bus: bt1-apb: Build the driver into the kernel
bus: bt1-axi: Use sysfs_streq instead of strncmp
bus: bt1-axi: Optimize the return points in the driver
bus: bt1-apb: Use sysfs_streq instead of strncmp
bus: bt1-apb: Use PTR_ERR_OR_ZERO to return from request-regs method
bus: bt1-apb: Fix show/store callback identations
bus: bt1-apb: Include linux/io.h
dt-bindings: memory: Add Baikal-T1 L2-cache Control Block binding
memory: Add Baikal-T1 L2-cache Control Block driver
bus: Add Baikal-T1 APB-bus driver
bus: Add Baikal-T1 AXI-bus driver
dt-bindings: bus: Add Baikal-T1 APB-bus binding
dt-bindings: bus: Add Baikal-T1 AXI-bus binding
staging: tegra-video: fix V4L2 dependency
tee: fix crypto select
drivers: soc: ti: knav_qmss_queue: Make knav_gp_range_ops static
soc: ti: add k3 platforms chipid module driver
dt-bindings: soc: ti: add binding for k3 platforms chipid module
...
One new platform gets added, the Realtek RTD1195, which is an older
Cortex-a7 based relative of the RTD12xx chips that are already supported
in arch/arm64. The platform may also be extended to support running
32-bit kernels on those 64-bit chips for memory-constrained machines.
In the Renesas shmobile platform, we gain support for "RZ/G1H" or R8A7742,
an eight-core chip based on Cortex-A15 and Cortex-A7 cores, originally
released in 2016 as one of the last high-end 32-bit designs.
There is ongoing cleanup for the integrator, tegra, imx, and omap2
platforms, with integrator getting very close to the goal of having
zero code in arch/arm/, and omap2 moving more of the chip specifics
from old board code into device tree files.
The Versatile Express platform is made more modular, with built-in
drivers now becoming loadable modules. This is part of a greater effort
for the Android OS to have a common kernel binary for all platforms and
any platform specific code in loadable modules.
The PXA platform drops support for Compulab's pxa2xx boards that had
rather unusual flash and PCI drivers but no known users remaining.
All device drivers specific to those boards can now get removed as
well.
Across platforms, there is ongoing cleanup, with Geert and Rob
revisiting some a lot of Kconfig options.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=gzCp
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC updates from Arnd Bergmann:
"One new platform gets added, the Realtek RTD1195, which is an older
Cortex-a7 based relative of the RTD12xx chips that are already
supported in arch/arm64. The platform may also be extended to support
running 32-bit kernels on those 64-bit chips for memory-constrained
machines.
In the Renesas shmobile platform, we gain support for "RZ/G1H" or
R8A7742, an eight-core chip based on Cortex-A15 and Cortex-A7 cores,
originally released in 2016 as one of the last high-end 32-bit
designs.
There is ongoing cleanup for the integrator, tegra, imx, and omap2
platforms, with integrator getting very close to the goal of having
zero code in arch/arm/, and omap2 moving more of the chip specifics
from old board code into device tree files.
The Versatile Express platform is made more modular, with built-in
drivers now becoming loadable modules. This is part of a greater
effort for the Android OS to have a common kernel binary for all
platforms and any platform specific code in loadable modules.
The PXA platform drops support for Compulab's pxa2xx boards that had
rather unusual flash and PCI drivers but no known users remaining. All
device drivers specific to those boards can now get removed as well.
Across platforms, there is ongoing cleanup, with Geert and Rob
revisiting some a lot of Kconfig options"
* tag 'arm-soc-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (94 commits)
ARM: omap2: fix omap5_realtime_timer_init definition
ARM: zynq: Don't select CONFIG_ICST
ARM: OMAP2+: Fix regression for using local timer on non-SMP SoCs
clk: versatile: Fix kconfig dependency on COMMON_CLK_VERSATILE
ARM: davinci: fix build failure without I2C
power: reset: vexpress: fix build issue
power: vexpress: cleanup: use builtin_platform_driver
power: vexpress: add suppress_bind_attrs to true
Revert "ARM: vexpress: Don't select VEXPRESS_CONFIG"
MAINTAINERS: pxa: remove Compulab arm/pxa support
ARM: pxa: remove Compulab pxa2xx boards
bus: arm-integrator-lm: Fix return value check in integrator_ap_lm_probe()
soc: imx: move cpu code to drivers/soc/imx
ARM: imx: move cpu definitions into a header
ARM: imx: use device_initcall for imx_soc_device_init
ARM: imx: pcm037: make pcm970_sja1000_platform_data static
bus: ti-sysc: Timers no longer need legacy quirk handling
ARM: OMAP2+: Drop old timer code for dmtimer and 32k counter
ARM: dts: Configure system timers for omap2
ARM: dts: Configure system timers for ti81xx
...
Pull uaccess/access_ok updates from Al Viro:
"Removals of trivially pointless access_ok() calls.
Note: the fiemap stuff was removed from the series, since they are
duplicates with part of ext4 series carried in Ted's tree"
* 'uaccess.access_ok' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vmci_host: get rid of pointless access_ok()
hfi1: get rid of pointless access_ok()
usb: get rid of pointless access_ok() calls
lpfc_debugfs: get rid of pointless access_ok()
efi_test: get rid of pointless access_ok()
drm_read(): get rid of pointless access_ok()
via-pmu: don't bother with access_ok()
drivers/crypto/ccp/sev-dev.c: get rid of pointless access_ok()
omapfb: get rid of pointless access_ok() calls
amifb: get rid of pointless access_ok() calls
drivers/fpga/dfl-afu-dma-region.c: get rid of pointless access_ok()
drivers/fpga/dfl-fme-pr.c: get rid of pointless access_ok()
cm4000_cs.c cmm_ioctl(): get rid of pointless access_ok()
nvram: drop useless access_ok()
n_hdlc_tty_read(): remove pointless access_ok()
tomoyo_write_control(): get rid of pointless access_ok()
btrfs_ioctl_send(): don't bother with access_ok()
fat_dir_ioctl(): hadn't needed that access_ok() for more than a decade...
dlmfs_file_write(): get rid of pointless access_ok()
- remove a now unnecessary usage of the KERNEL_DS for
sys_oabi_epoll_ctl()
- update my email address in a number of drivers
- decompressor EFI updates from Ard Biesheuvel
- module unwind section handling updates
- sparsemem Kconfig cleanups
- make act_mm macro respect THREAD_SIZE
-----BEGIN PGP SIGNATURE-----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=vMHE
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM updates from Russell King:
- remove a now unnecessary usage of the KERNEL_DS for
sys_oabi_epoll_ctl()
- update my email address in a number of drivers
- decompressor EFI updates from Ard Biesheuvel
- module unwind section handling updates
- sparsemem Kconfig cleanups
- make act_mm macro respect THREAD_SIZE
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 8980/1: Allow either FLATMEM or SPARSEMEM on the multiplatform build
ARM: 8979/1: Remove redundant ARCH_SPARSEMEM_DEFAULT setting
ARM: 8978/1: mm: make act_mm() respect THREAD_SIZE
ARM: decompressor: run decompressor in place if loaded via UEFI
ARM: decompressor: move GOT into .data for EFI enabled builds
ARM: decompressor: defer loading of the contents of the LC0 structure
ARM: decompressor: split off _edata and stack base into separate object
ARM: decompressor: move headroom variable out of LC0
ARM: 8976/1: module: allow arch overrides for .init section names
ARM: 8975/1: module: fix handling of unwind init sections
ARM: 8974/1: use SPARSMEM_STATIC when SPARSEMEM is enabled
ARM: 8971/1: replace the sole use of a symbol with its definition
ARM: 8969/1: decompressor: simplify libfdt builds
Update rmk's email address in various drivers
ARM: compat: remove KERNEL_DS usage in sys_oabi_epoll_ctl()
- Branch Target Identification (BTI)
* Support for ARMv8.5-BTI in both user- and kernel-space. This
allows branch targets to limit the types of branch from which
they can be called and additionally prevents branching to
arbitrary code, although kernel support requires a very recent
toolchain.
* Function annotation via SYM_FUNC_START() so that assembly
functions are wrapped with the relevant "landing pad"
instructions.
* BPF and vDSO updates to use the new instructions.
* Addition of a new HWCAP and exposure of BTI capability to
userspace via ID register emulation, along with ELF loader
support for the BTI feature in .note.gnu.property.
* Non-critical fixes to CFI unwind annotations in the sigreturn
trampoline.
- Shadow Call Stack (SCS)
* Support for Clang's Shadow Call Stack feature, which reserves
platform register x18 to point at a separate stack for each
task that holds only return addresses. This protects function
return control flow from buffer overruns on the main stack.
* Save/restore of x18 across problematic boundaries (user-mode,
hypervisor, EFI, suspend, etc).
* Core support for SCS, should other architectures want to use it
too.
* SCS overflow checking on context-switch as part of the existing
stack limit check if CONFIG_SCHED_STACK_END_CHECK=y.
- CPU feature detection
* Removed numerous "SANITY CHECK" errors when running on a system
with mismatched AArch32 support at EL1. This is primarily a
concern for KVM, which disabled support for 32-bit guests on
such a system.
* Addition of new ID registers and fields as the architecture has
been extended.
- Perf and PMU drivers
* Minor fixes and cleanups to system PMU drivers.
- Hardware errata
* Unify KVM workarounds for VHE and nVHE configurations.
* Sort vendor errata entries in Kconfig.
- Secure Monitor Call Calling Convention (SMCCC)
* Update to the latest specification from Arm (v1.2).
* Allow PSCI code to query the SMCCC version.
- Software Delegated Exception Interface (SDEI)
* Unexport a bunch of unused symbols.
* Minor fixes to handling of firmware data.
- Pointer authentication
* Add support for dumping the kernel PAC mask in vmcoreinfo so
that the stack can be unwound by tools such as kdump.
* Simplification of key initialisation during CPU bringup.
- BPF backend
* Improve immediate generation for logical and add/sub
instructions.
- vDSO
- Minor fixes to the linker flags for consistency with other
architectures and support for LLVM's unwinder.
- Clean up logic to initialise and map the vDSO into userspace.
- ACPI
- Work around for an ambiguity in the IORT specification relating
to the "num_ids" field.
- Support _DMA method for all named components rather than only
PCIe root complexes.
- Minor other IORT-related fixes.
- Miscellaneous
* Initialise debug traps early for KGDB and fix KDB cacheflushing
deadlock.
* Minor tweaks to early boot state (documentation update, set
TEXT_OFFSET to 0x0, increase alignment of PE/COFF sections).
* Refactoring and cleanup
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAl7U9csQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNLBHCACs/YU4SM7Om5f+7QnxIKao5DBr2CnGGvdC
yTfDghFDTLQVv3MufLlfno3yBe5G8sQpcZfcc+hewfcGoMzVZXu8s7LzH6VSn9T9
jmT3KjDMrg0RjSHzyumJp2McyelTk0a4FiKArSIIKsJSXUyb1uPSgm7SvKVDwEwU
JGDzL9IGilmq59GiXfDzGhTZgmC37QdwRoRxDuqtqWQe5CHoRXYexg87HwBKOQxx
HgU9L7ehri4MRZfpyjaDrr6quJo3TVnAAKXNBh3mZAskVS9ZrfKpEH0kYWYuqybv
znKyHRecl/rrGePV8RTMtrwnSdU26zMXE/omsVVauDfG9hqzqm+Q
=w3qi
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"A sizeable pile of arm64 updates for 5.8.
Summary below, but the big two features are support for Branch Target
Identification and Clang's Shadow Call stack. The latter is currently
arm64-only, but the high-level parts are all in core code so it could
easily be adopted by other architectures pending toolchain support
Branch Target Identification (BTI):
- Support for ARMv8.5-BTI in both user- and kernel-space. This allows
branch targets to limit the types of branch from which they can be
called and additionally prevents branching to arbitrary code,
although kernel support requires a very recent toolchain.
- Function annotation via SYM_FUNC_START() so that assembly functions
are wrapped with the relevant "landing pad" instructions.
- BPF and vDSO updates to use the new instructions.
- Addition of a new HWCAP and exposure of BTI capability to userspace
via ID register emulation, along with ELF loader support for the
BTI feature in .note.gnu.property.
- Non-critical fixes to CFI unwind annotations in the sigreturn
trampoline.
Shadow Call Stack (SCS):
- Support for Clang's Shadow Call Stack feature, which reserves
platform register x18 to point at a separate stack for each task
that holds only return addresses. This protects function return
control flow from buffer overruns on the main stack.
- Save/restore of x18 across problematic boundaries (user-mode,
hypervisor, EFI, suspend, etc).
- Core support for SCS, should other architectures want to use it
too.
- SCS overflow checking on context-switch as part of the existing
stack limit check if CONFIG_SCHED_STACK_END_CHECK=y.
CPU feature detection:
- Removed numerous "SANITY CHECK" errors when running on a system
with mismatched AArch32 support at EL1. This is primarily a concern
for KVM, which disabled support for 32-bit guests on such a system.
- Addition of new ID registers and fields as the architecture has
been extended.
Perf and PMU drivers:
- Minor fixes and cleanups to system PMU drivers.
Hardware errata:
- Unify KVM workarounds for VHE and nVHE configurations.
- Sort vendor errata entries in Kconfig.
Secure Monitor Call Calling Convention (SMCCC):
- Update to the latest specification from Arm (v1.2).
- Allow PSCI code to query the SMCCC version.
Software Delegated Exception Interface (SDEI):
- Unexport a bunch of unused symbols.
- Minor fixes to handling of firmware data.
Pointer authentication:
- Add support for dumping the kernel PAC mask in vmcoreinfo so that
the stack can be unwound by tools such as kdump.
- Simplification of key initialisation during CPU bringup.
BPF backend:
- Improve immediate generation for logical and add/sub instructions.
vDSO:
- Minor fixes to the linker flags for consistency with other
architectures and support for LLVM's unwinder.
- Clean up logic to initialise and map the vDSO into userspace.
ACPI:
- Work around for an ambiguity in the IORT specification relating to
the "num_ids" field.
- Support _DMA method for all named components rather than only PCIe
root complexes.
- Minor other IORT-related fixes.
Miscellaneous:
- Initialise debug traps early for KGDB and fix KDB cacheflushing
deadlock.
- Minor tweaks to early boot state (documentation update, set
TEXT_OFFSET to 0x0, increase alignment of PE/COFF sections).
- Refactoring and cleanup"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (148 commits)
KVM: arm64: Move __load_guest_stage2 to kvm_mmu.h
KVM: arm64: Check advertised Stage-2 page size capability
arm64/cpufeature: Add get_arm64_ftr_reg_nowarn()
ACPI/IORT: Remove the unused __get_pci_rid()
arm64/cpuinfo: Add ID_MMFR4_EL1 into the cpuinfo_arm64 context
arm64/cpufeature: Add remaining feature bits in ID_AA64PFR1 register
arm64/cpufeature: Add remaining feature bits in ID_AA64PFR0 register
arm64/cpufeature: Add remaining feature bits in ID_AA64ISAR0 register
arm64/cpufeature: Add remaining feature bits in ID_MMFR4 register
arm64/cpufeature: Add remaining feature bits in ID_PFR0 register
arm64/cpufeature: Introduce ID_MMFR5 CPU register
arm64/cpufeature: Introduce ID_DFR1 CPU register
arm64/cpufeature: Introduce ID_PFR2 CPU register
arm64/cpufeature: Make doublelock a signed feature in ID_AA64DFR0
arm64/cpufeature: Drop TraceFilt feature exposure from ID_DFR0 register
arm64/cpufeature: Add explicit ftr_id_isar0[] for ID_ISAR0 register
arm64: mm: Add asid_gen_match() helper
firmware: smccc: Fix missing prototype warning for arm_smccc_version_init
arm64: vdso: Fix CFI directives in sigreturn trampoline
arm64: vdso: Don't prefix sigreturn trampoline with a BTI C instruction
...
- preliminary changes for RISC-V
- Add support for setting the resolution on the EFI framebuffer
- Simplify kernel image loading for arm64
- Move .bss into .data via the linker script instead of relying on symbol
annotations.
- Get rid of __pure getters to access global variables
- Clean up the config table matching arrays
- Rename pr_efi/pr_efi_err to efi_info/efi_err, and use them consistently
- Simplify and unify initrd loading
- Parse the builtin command line on x86 (if provided)
- Implement printk() support, including support for wide character strings
- Simplify GDT handling in early mixed mode thunking code
- Some other minor fixes and cleanups
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=XG4E
-----END PGP SIGNATURE-----
Merge tag 'efi-core-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI updates from Ingo Molnar:
"The EFI changes for this cycle are:
- preliminary changes for RISC-V
- Add support for setting the resolution on the EFI framebuffer
- Simplify kernel image loading for arm64
- Move .bss into .data via the linker script instead of relying on
symbol annotations.
- Get rid of __pure getters to access global variables
- Clean up the config table matching arrays
- Rename pr_efi/pr_efi_err to efi_info/efi_err, and use them
consistently
- Simplify and unify initrd loading
- Parse the builtin command line on x86 (if provided)
- Implement printk() support, including support for wide character
strings
- Simplify GDT handling in early mixed mode thunking code
- Some other minor fixes and cleanups"
* tag 'efi-core-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (79 commits)
efi/x86: Don't blow away existing initrd
efi/x86: Drop the special GDT for the EFI thunk
efi/libstub: Add missing prototype for PE/COFF entry point
efi/efivars: Add missing kobject_put() in sysfs entry creation error path
efi/libstub: Use pool allocation for the command line
efi/libstub: Don't parse overlong command lines
efi/libstub: Use snprintf with %ls to convert the command line
efi/libstub: Get the exact UTF-8 length
efi/libstub: Use %ls for filename
efi/libstub: Add UTF-8 decoding to efi_puts
efi/printf: Add support for wchar_t (UTF-16)
efi/gop: Add an option to list out the available GOP modes
efi/libstub: Add definitions for console input and events
efi/libstub: Implement printk-style logging
efi/printf: Turn vsprintf into vsnprintf
efi/printf: Abort on invalid format
efi/printf: Refactor code to consolidate padding and output
efi/printf: Handle null string input
efi/printf: Factor out integer argument retrieval
efi/printf: Factor out width/precision parsing
...
-----BEGIN PGP SIGNATURE-----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=pUBG
-----END PGP SIGNATURE-----
Merge tag 'printk-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Benjamin Herrenschmidt solved a problem with non-matched console
aliases by first checking consoles defined on the command line. It is
a more conservative approach than the previous attempts.
- Benjamin also made sure that the console accessible via /dev/console
always has CON_CONSDEV flag.
- Andy Shevchenko added the %ptT modifier for printing struct time64_t.
It extends the existing %ptR handling for struct rtc_time.
- Bruno Meneguele fixed /dev/kmsg error value returned by unsupported
SEEK_CUR.
- Tetsuo Handa removed unused pr_cont_once().
... and a few small fixes.
* tag 'printk-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: Remove pr_cont_once()
printk: handle blank console arguments passed in.
kernel/printk: add kmsg SEEK_CUR handling
printk: Fix a typo in comment "interator"->"iterator"
usb: pulse8-cec: Switch to use %ptT
ARM: bcm2835: Switch to use %ptT
lib/vsprintf: Print time64_t in human readable format
lib/vsprintf: update comment about simple_strto<foo>() functions
printk: Correctly set CON_CONSDEV even when preferred console was not registered
printk: Fix preferred console selection with multiple matches
printk: Move console matching logic into a separate function
printk: Convert a use of sprintf to snprintf in console_unlock
Support for Clang's Shadow Call Stack in the kernel
(Sami Tolvanen and Will Deacon)
* for-next/scs:
arm64: entry-ftrace.S: Update comment to indicate that x18 is live
scs: Move DEFINE_SCS macro into core code
scs: Remove references to asm/scs.h from core code
scs: Move scs_overflow_check() out of architecture code
arm64: scs: Use 'scs_sp' register alias for x18
scs: Move accounting into alloc/free functions
arm64: scs: Store absolute SCS stack pointer value in thread_info
efi/libstub: Disable Shadow Call Stack
arm64: scs: Add shadow stacks for SDEI
arm64: Implement Shadow Call Stack
arm64: Disable SCS for hypervisor code
arm64: vdso: Disable Shadow Call Stack
arm64: efi: Restore register x18 if it was corrupted
arm64: Preserve register x18 when CPU is suspended
arm64: Reserve register x18 from general allocation with SCS
scs: Disable when function graph tracing is enabled
scs: Add support for stack usage debugging
scs: Add page accounting for shadow call stack allocations
scs: Add support for Clang's Shadow Call Stack (SCS)
ACPI and IORT updates
(Lorenzo Pieralisi)
* for-next/acpi:
ACPI/IORT: Remove the unused __get_pci_rid()
ACPI/IORT: Fix PMCG node single ID mapping handling
ACPI: IORT: Add comments for not calling acpi_put_table()
ACPI: GTDT: Put GTDT table after parsing
ACPI: IORT: Add extra message "applying workaround" for off-by-1 issue
ACPI/IORT: work around num_ids ambiguity
Revert "ACPI/IORT: Fix 'Number of IDs' handling in iort_id_map()"
ACPI/IORT: take _DMA methods into account for named components
BPF JIT optimisations for immediate value generation
(Luke Nelson)
* for-next/bpf:
bpf, arm64: Optimize ADD,SUB,JMP BPF_K using arm64 add/sub immediates
bpf, arm64: Optimize AND,OR,XOR,JSET BPF_K using arm64 logical immediates
arm64: insn: Fix two bugs in encoding 32-bit logical immediates
Addition of new CPU ID register fields and removal of some benign sanity checks
(Anshuman Khandual and others)
* for-next/cpufeature: (27 commits)
KVM: arm64: Check advertised Stage-2 page size capability
arm64/cpufeature: Add get_arm64_ftr_reg_nowarn()
arm64/cpuinfo: Add ID_MMFR4_EL1 into the cpuinfo_arm64 context
arm64/cpufeature: Add remaining feature bits in ID_AA64PFR1 register
arm64/cpufeature: Add remaining feature bits in ID_AA64PFR0 register
arm64/cpufeature: Add remaining feature bits in ID_AA64ISAR0 register
arm64/cpufeature: Add remaining feature bits in ID_MMFR4 register
arm64/cpufeature: Add remaining feature bits in ID_PFR0 register
arm64/cpufeature: Introduce ID_MMFR5 CPU register
arm64/cpufeature: Introduce ID_DFR1 CPU register
arm64/cpufeature: Introduce ID_PFR2 CPU register
arm64/cpufeature: Make doublelock a signed feature in ID_AA64DFR0
arm64/cpufeature: Drop TraceFilt feature exposure from ID_DFR0 register
arm64/cpufeature: Add explicit ftr_id_isar0[] for ID_ISAR0 register
arm64/cpufeature: Drop open encodings while extracting parange
arm64/cpufeature: Validate hypervisor capabilities during CPU hotplug
arm64: cpufeature: Group indexed system register definitions by name
arm64: cpufeature: Extend comment to describe absence of field info
arm64: drop duplicate definitions of ID_AA64MMFR0_TGRAN constants
arm64: cpufeature: Add an overview comment for the cpufeature framework
...
Minor documentation tweaks for silicon errata and booting requirements
(Rob Herring and Will Deacon)
* for-next/docs:
arm64: silicon-errata.rst: Sort the Cortex-A55 entries
arm64: docs: Mandate that the I-cache doesn't hold stale kernel text
Minor Kconfig cleanups
(Geert Uytterhoeven)
* for-next/kconfig:
arm64: cpufeature: Add "or" to mitigations for multiple errata
arm64: Sort vendor-specific errata
Miscellaneous updates
(Ard Biesheuvel and others)
* for-next/misc:
arm64: mm: Add asid_gen_match() helper
arm64: stacktrace: Factor out some common code into on_stack()
arm64: Call debug_traps_init() from trap_init() to help early kgdb
arm64: cacheflush: Fix KGDB trap detection
arm64/cpuinfo: Move device_initcall() near cpuinfo_regs_init()
arm64: kexec_file: print appropriate variable
arm: mm: use __pfn_to_section() to get mem_section
arm64: Reorder the macro arguments in the copy routines
efi/libstub/arm64: align PE/COFF sections to segment alignment
KVM: arm64: Drop PTE_S2_MEMATTR_MASK
arm64/kernel: Fix range on invalidating dcache for boot page tables
arm64: set TEXT_OFFSET to 0x0 in preparation for removing it entirely
arm64: lib: Consistently enable crc32 extension
arm64/mm: Use phys_to_page() to access pgtable memory
arm64: smp: Make cpus_stuck_in_kernel static
arm64: entry: remove unneeded semicolon in el1_sync_handler()
arm64/kernel: vmlinux.lds: drop redundant discard/keep macros
arm64: drop GZFLAGS definition and export
arm64: kexec_file: Avoid temp buffer for RNG seed
arm64: rename stext to primary_entry
Perf PMU driver updates
(Tang Bin and others)
* for-next/perf:
pmu/smmuv3: Clear IRQ affinity hint on device removal
drivers/perf: hisi: Permit modular builds of HiSilicon uncore drivers
drivers/perf: hisi: Fix typo in events attribute array
drivers/perf: arm_spe_pmu: Avoid duplicate printouts
drivers/perf: arm_dsu_pmu: Avoid duplicate printouts
Pointer authentication updates and support for vmcoreinfo
(Amit Daniel Kachhap and Mark Rutland)
* for-next/ptr-auth:
Documentation/vmcoreinfo: Add documentation for 'KERNELPACMASK'
arm64/crash_core: Export KERNELPACMASK in vmcoreinfo
arm64: simplify ptrauth initialization
arm64: remove ptrauth_keys_install_kernel sync arg
SDEI cleanup and non-critical fixes
(James Morse and others)
* for-next/sdei:
firmware: arm_sdei: Document the motivation behind these set_fs() calls
firmware: arm_sdei: remove unused interfaces
firmware: arm_sdei: Put the SDEI table after using it
firmware: arm_sdei: Drop check for /firmware/ node and always register driver
SMCCC updates and refactoring
(Sudeep Holla)
* for-next/smccc:
firmware: smccc: Fix missing prototype warning for arm_smccc_version_init
firmware: smccc: Add function to fetch SMCCC version
firmware: smccc: Refactor SMCCC specific bits into separate file
firmware: smccc: Drop smccc_version enum and use ARM_SMCCC_VERSION_1_x instead
firmware: smccc: Add the definition for SMCCCv1.2 version/error codes
firmware: smccc: Update link to latest SMCCC specification
firmware: smccc: Add HAVE_ARM_SMCCC_DISCOVERY to identify SMCCC v1.1 and above
vDSO cleanup and non-critical fixes
(Mark Rutland and Vincenzo Frascino)
* for-next/vdso:
arm64: vdso: Add --eh-frame-hdr to ldflags
arm64: vdso: use consistent 'map' nomenclature
arm64: vdso: use consistent 'abi' nomenclature
arm64: vdso: simplify arch_vdso_type ifdeffery
arm64: vdso: remove aarch32_vdso_pages[]
arm64: vdso: Add '-Bsymbolic' to ldflags
Commit
987053a300 ("efi/x86: Move command-line initrd loading to efi_main")
moved the command-line initrd loading into efi_main(), with a check
to ensure that it was attempted only if the EFI stub was booted via
efi_pe_entry rather than the EFI handover entry.
However, in the case where it was booted via handover entry, and thus an
initrd may have already been loaded by the bootloader, it then wrote 0
for the initrd address and size, removing any existing initrd.
Fix this by checking if size is positive before setting the fields in
the bootparams structure.
Fixes: 987053a300 ("efi/x86: Move command-line initrd loading to efi_main")
Reported-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lkml.kernel.org/r/20200527232602.21596-1-nivedita@alum.mit.edu
- Optimize imx-scu driver to use one TX and one RX instead of four for
talking to SCU.
- Fix one possible message header corruption where the response is
longer than the request.
- Move System Control defines into dt-bindings header, so that DT can
use them as well.
- A couple of small fixups.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl7IeuUUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM5CpAf/VV2krqXlgTXA1Ppl+ivdGkx9ntwo
dVtZYNr65Z1iqp6yujW7cH/qulXfkaFanwDptq9ulBkG6uiyV06GCtBxpp3VhNOB
60uaS8RsieYmCz3e8j4kZkMCBthpD72wt0DxF1TlJu2d/cWfsM4/bMbrx0qYiT0V
J5FqcGH0xbe+E5YITdoPQbNxEig49q2P6BhkNLQelVQtVgM0lwSpDX3WRpCizch4
bbKSVYudV/rGGPM7ZYM53N+ngwKZurRbIf7br1QgA4ZlQxdCtADB6IRd2RsfrC8P
4BizRONfh46ogrnb9/P951RZu9H7VFRkTurnXdU+NcFK8HPYDGQmm7P2SQ==
=cJwM
-----END PGP SIGNATURE-----
Merge tag 'imx-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers
i.MX drivers update for 5.8:
- Optimize imx-scu driver to use one TX and one RX instead of four for
talking to SCU.
- Fix one possible message header corruption where the response is
longer than the request.
- Move System Control defines into dt-bindings header, so that DT can
use them as well.
- A couple of small fixups.
* tag 'imx-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
firmware: imx: scu: Fix possible memory leak in imx_scu_probe()
dt-bindings: firmware: imx: Add more system controls and PM clock types
dt-bindings: firmware: imx: Move system control into dt-binding headfile
firmware: imx: scu: Fix corruption of header
firmware: imx-scu: Support one TX and one RX
soc: imx8m: No need to put node when of_find_compatible_node() failed
Link: https://lore.kernel.org/r/20200523032516.11016-1-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This contains a large set of cleanups, bug fixes, general improvements
and documentation fixes for the RPMH driver. It adds a debugfs mechanism
for inspecting Command DB. Socinfo got the "soc_id" attribute defines
and definitions for a various variants of MSM8939.
RPMH, RPMPD and RPMHPD where made possible to build as modules, but RPMH
had to be reverted due to a compilation issue when tracing is enabled.
RPMHPD gained power-domains for the SM8250 voltage corners.
The SCM driver gained fixes for two build warnings and the SMP2P had an
unnecessary error print removed.
-----BEGIN PGP SIGNATURE-----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=tkhb
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers
Qualcomm driver updates for v5.8
This contains a large set of cleanups, bug fixes, general improvements
and documentation fixes for the RPMH driver. It adds a debugfs mechanism
for inspecting Command DB. Socinfo got the "soc_id" attribute defines
and definitions for a various variants of MSM8939.
RPMH, RPMPD and RPMHPD where made possible to build as modules, but RPMH
had to be reverted due to a compilation issue when tracing is enabled.
RPMHPD gained power-domains for the SM8250 voltage corners.
The SCM driver gained fixes for two build warnings and the SMP2P had an
unnecessary error print removed.
* tag 'qcom-drivers-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (42 commits)
Revert "soc: qcom: rpmh: Allow RPMH driver to be loaded as a module"
soc: qcom: rpmh-rsc: Remove the pm_lock
soc: qcom: rpmh-rsc: Simplify locking by eliminating the per-TCS lock
kernel/cpu_pm: Fix uninitted local in cpu_pm
soc: qcom: rpmh-rsc: We aren't notified of our own failure w/ NOTIFY_BAD
soc: qcom: rpmh-rsc: Correctly ignore CPU_CLUSTER_PM notifications
firmware: qcom_scm-legacy: Replace zero-length array with flexible-array
soc: qcom: rpmh-rsc: Timeout after 1 second in write_tcs_reg_sync()
soc: qcom: rpmh-rsc: Factor "tcs_reg_addr" and "tcs_cmd_addr" calculation
soc: qcom: socinfo: add msm8936/39 and apq8036/39 soc ids
soc: qcom: aoss: Add SM8250 compatible
soc: qcom: pdr: Remove impossible error condition
soc: qcom: rpmh: Dirt can only make you dirtier, not cleaner
soc: qcom: rpmhpd: Add SM8250 power domains
firmware: qcom_scm: fix bogous abuse of dma-direct internals
dt-bindings: soc: qcom: apr: Use generic node names for APR services
firmware: qcom_scm: Remove unneeded conversion to bool
soc: qcom: cmd-db: Properly endian swap the slv_id for debugfs
soc: qcom: cmd-db: Use 5 digits for printing address
soc: qcom: cmd-db: Cast sizeof() to int to silence field width warning
...
Link: https://lore.kernel.org/r/20200519052533.1250024-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This contains a change that makes the BPMP driver a regular driver,
which fixes some weird suspend/resume ordering issues. Another fix is
also included to implement another way of enabling the L2 cache after
LP2 suspend.
-----BEGIN PGP SIGNATURE-----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=wn+X
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.8-firmware-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers
firmware: tegra: Changes for v5.8-rc1
This contains a change that makes the BPMP driver a regular driver,
which fixes some weird suspend/resume ordering issues. Another fix is
also included to implement another way of enabling the L2 cache after
LP2 suspend.
* tag 'tegra-for-5.8-firmware-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
firmware: tegra: Defer BPMP probe if shared memory not available
firmware: tf: Different way of L2 cache enabling after LP2 suspend
firmware: tegra: Make BPMP a regular driver
Link: https://lore.kernel.org/r/20200515145311.1580134-6-thierry.reding@gmail.com
Link: https://lore.kernel.org/r/20200522142846.2376224-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
1. Addition of ARM SMC/HVC as SCMI transport type with required
abstraction already in place
2. Initial infrastructure support to add SCMI notifications from
platform to agents
3. Miscellaneous fix adding header include guards
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEunHlEgbzHrJD3ZPhAEG6vDF+4pgFAl65dykACgkQAEG6vDF+
4pjNhBAAnUQhcRdUqVRo/sQ3VQ2G0arGnZF0w83GFoMwHFixL5bISFOP/FU27MEq
9QNYxFhG8Yj6pl2gNExN2cmdxGdr4lf+KWLWfKuHOaF+HWSs4G8FarycGQpLnf7n
ErPW+1WP/8JFXykiqU+K7d2n0q7YlL25kF3VjPQaXpwkd2/cz9YxbUL8jOwF+LzL
8rErVxnDGrQisxrk6A6eQ5cWh9D2Itr+hho1Cgyhwj5K3Z8PSorA24Jd+hpHvjt0
7oZjl/GQjqdytOXsZ/OxcvGdsid8afFFnmyEfH++knq8KjuwdieM5v2TAjq7oXlO
gMB4ztJfq5QM1bbRo0IuHdEMs1Abs/h1qGOeDQStN2M1VP5sDG/NiZYarlW+NdbM
ph2RsrtulOQoiXdhWx2UEHSXL2asdjSdwX9cCpYCxYy2BD/NCe97eglspVFFP+E8
/Hj/5ULAPxjnsLnToAudU3zgVxT6Ag0Pdt7K6YfmzGL7r/io+IQ8GJpdFefQit1S
8ucewpVaDdvmfmbRATjB9HWN+hnoF1lySp4X2svY2HMURXP0CN0fl3m0FFdLkoBA
v/Czu5iRwFsn0bBsXdTy3hvgiYWYS8gsMlQXa3TYGzherQgWNKQ8U+ScpKoo94Ln
tTYb0/Gh5bSB47c1vkfsF5sq1KLdF1r/REqZHLp3MkHgOOnrouc=
=qqL7
-----END PGP SIGNATURE-----
Merge tag 'scmi-updates-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/drivers
ARM SCMI/SCPI updates for v5.8
1. Addition of ARM SMC/HVC as SCMI transport type with required
abstraction already in place
2. Initial infrastructure support to add SCMI notifications from
platform to agents
3. Miscellaneous fix adding header include guards
* tag 'scmi-updates-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: fix psci dependency
firmware: arm_scmi: Fix return error code in smc_send_message
firmware: arm_scmi: Fix handling of unexpected delayed responses
firmware: arm_scmi: Clear channel for delayed responses
firmware: arm_scmi: Clear channel on reception of unexpected responses
firmware: arm_scmi: Rename .clear_notification() transport_ops
firmware: arm_scmi: Add support for notifications message processing
firmware: arm_scmi: Add notifications support in transport layer
firmware: arm_scmi: Update protocol commands and notification list
firmware: arm_scmi: Add receive buffer support for notifications
firmware: arm_scpi: Add include guard to linux/scpi_protocol.h
firmware: arm_scmi: Add include guard to linux/scmi_protocol.h
firmware: arm_scmi: Drop checking for shmem property in parent node
firmware: arm_scmi: Check shmem property for channel availablity
firmware: arm_scmi: Drop empty stub for smc_mark_txdone
firmware: arm_scmi: Make mutex channel specific
firmware: arm_scmi: Add smc/hvc transport
dt-bindings: arm: Add smc/hvc transport for SCMI
Link: https://lore.kernel.org/r/20200512110357.GA26454@bogus
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Rename pr_efi/pr_efi_err to efi_info/efi_err, and use them consistently
- Simplify and unify initrd loading
- Parse the builtin command line on x86 (if provided)
- Implement printk() support, including support for wide character strings
- Some fixes for issues introduced by the first batch of v5.8 changes
- Fix a missing prototypes warning
- Simplify GDT handling in early mixed mode thunking code
- Some other minor fixes and cleanups
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEnNKg2mrY9zMBdeK7wjcgfpV0+n0FAl7Lb8UACgkQwjcgfpV0
+n3/aAgAkEqqR/BoyzFiyYHujq6bXjESKYr8LrIjNWfnofB6nZqp1yXwFdL0qbj/
PTZ1qIQAnOMmj11lvy1X894h2ZLqE6XEkqv7Xd2oxkh3fF6amlQUWfMpXUuGLo1k
C4QGSfA0OOiM0OOi0Aqk1fL7sTmH23/j63dTR+fH8JMuYgjdls/yWNs0miqf8W2H
ftj8fAKgHIJzFvdTC0vn1DZ6dEKczGLPEcVZ2ns2IJOJ69DsStKPLcD0mlW+EgV2
EyfRSCQv55RYZRhdUOb+yVLRfU0M0IMDrrCDErHxZHXnQy00tmKXiEL20yuegv3u
MUtRRw8ocn2/RskjgZkxtMjAAlty9A==
=AwCh
-----END PGP SIGNATURE-----
Merge tag 'efi-changes-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi into efi/core
More EFI changes for v5.8:
- Rename pr_efi/pr_efi_err to efi_info/efi_err, and use them consistently
- Simplify and unify initrd loading
- Parse the builtin command line on x86 (if provided)
- Implement printk() support, including support for wide character strings
- Some fixes for issues introduced by the first batch of v5.8 changes
- Fix a missing prototypes warning
- Simplify GDT handling in early mixed mode thunking code
- Some other minor fixes and cleanups
Conflicts:
drivers/firmware/efi/libstub/efistub.h
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Fix a missing prototype warning by adding a forward declaration
for the PE/COFF entrypoint, and while at it, align the function
name between the x86 and ARM versions of the stub.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
- fix EFI framebuffer earlycon for wide fonts
- avoid filling screen_info with garbage if the EFI framebuffer is not
available
- fix a potential host tool build error due to a symbol clash on x86
- work around a EFI firmware bug regarding the binary format of the TPM
final events table
- fix a missing memory free by reworking the E820 table sizing routine to
not do the allocation in the first place
- add CPER parsing for firmware errors
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEnNKg2mrY9zMBdeK7wjcgfpV0+n0FAl7H3HIACgkQwjcgfpV0
+n1pEAgAjJfwDJmBcYhJzjX8WLnXPJiUmUH9d9tF1t3TlhF6c1G8auXU+Fyia4uI
ejRNw/N4+SXzM9yL+Z19PKBpQsPzQXgm2r9WTPVN5jTelUUI+jFZCH+pKC+TKRp1
/Tx/XIMifCw18gNXsjj6WJEeAyLoh4tb+6bwn7DlPO5cPrxX49LvPuQNMXybk2yi
KimdNKUry1wYpo/WpHqEdFq5//CLAWNkrL9UXlkANvQ6BJNIMI0kRIUC0MVsTMnE
BoCkBO93PdvqxOcnV3WTRvSFetb7qA59Jay62jLc26Myqc4t4pgVWojVm6RHLfZg
17btYACxICgF2mNTZYlKemEEqKPpzQ==
=mY5f
-----END PGP SIGNATURE-----
Merge tag 'efi-fixes-for-v5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi into efi/urgent
Pull EFI fixes from Ard Biesheuvel:
"- fix EFI framebuffer earlycon for wide fonts
- avoid filling screen_info with garbage if the EFI framebuffer is not
available
- fix a potential host tool build error due to a symbol clash on x86
- work around a EFI firmware bug regarding the binary format of the TPM
final events table
- fix a missing memory free by reworking the E820 table sizing routine to
not do the allocation in the first place
- add CPER parsing for firmware errors"
The documentation provided by kobject_init_and_add() clearly spells out
the need to call kobject_put() on the kobject if an error is returned.
Add this missing call to the error path.
Cc: <stable@vger.kernel.org>
Reported-by: 亿一 <teroincn@gmail.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Now that we removed the memory limit for the allocation of the
command line, there is no longer a need to use the page based
allocator so switch to a pool allocation instead.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Check if the command line passed in is larger than COMMAND_LINE_SIZE,
and truncate it to the last full argument if so.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200521002921.69650-1-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Since commit 93d2e4322a ("of: platform: Batch fwnode parsing when
adding all top level devices") was added, the probing of the Tegra
SRAM device has occurred later in the boot sequence, after the BPMP
has been probed. The BPMP uses sections of the SRAM for shared memory
and if the BPMP is probed before the SRAM then it fails to probe and
never tries again. This is causing a boot failure on Tegra186 and
Tegra194. Fix this by allowing the probe of the BPMP to be deferred if
the SRAM is not available yet.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Commit f2ae97062a ("firmware: smccc: Refactor SMCCC specific bits into
separate file") introduced the following build warning:
drivers/firmware/smccc/smccc.c:14:13: warning: no previous prototype for
function 'arm_smccc_version_init' [-Wmissing-prototypes]
void __init arm_smccc_version_init(u32 version, enum arm_smccc_conduit conduit)
^~~~~~~~~~~~~~~~~~~~~~
Fix the same by adding the missing prototype in arm-smccc.h
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20200521110836.57252-1-sudeep.holla@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
For backward compatibility reasons, PSCI maintains SMCCC version as
SMCCC didn't provide ARM_SMCCC_VERSION_FUNC_ID until v1.1.
PSCI initialises both the SMCCC version and conduit. Similar to the
conduit, let us provide accessors to fetch the SMCCC version also so
that other SMCCC v1.1+ features can use it.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Etienne Carriere <etienne.carriere@st.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Etienne Carriere <etienne.carriere@st.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20200518091222.27467-7-sudeep.holla@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
In order to add newer SMCCC v1.1+ functionality and to avoid cluttering
PSCI firmware driver with SMCCC bits, let us move the SMCCC specific
details under drivers/firmware/smccc/smccc.c
We can also drop conduit and smccc_version from psci_operations structure
as SMCCC was the sole user and now it maintains those.
No functionality change in this patch though.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Etienne Carriere <etienne.carriere@st.com>
Reviewed-by: Etienne Carriere <etienne.carriere@st.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20200518091222.27467-6-sudeep.holla@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Instead of maintaining 2 sets of enums/macros for tracking SMCCC version,
let us drop smccc_version enum and use ARM_SMCCC_VERSION_1_x directly
instead.
This is in preparation to drop smccc_version here and move it separately
under drivers/firmware/smccc.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Etienne Carriere <etienne.carriere@st.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Etienne Carriere <etienne.carriere@st.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20200518091222.27467-5-sudeep.holla@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
SMCCC v1.0 lacked discoverability of version and features. To accelerate
adoption of few mitigations and protect systems more rapidly from various
vulnerability, PSCI v1.0 was updated to add SMCCC discovery mechanism
though the PSCI firmware implementation of PSCI_FEATURES(SMCCC_VERSION)
which returns success on firmware compliant to SMCCC v1.1 and above.
This inturn makes SMCCC v1.1 and above dependent on ARM_PSCI_FW for
backward compatibility. Let us introduce a new hidden config for the
same to build more features on top of SMCCC v1.1 and above.
While at it, also sort alphabetically the psci entry.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Etienne Carriere <etienne.carriere@st.com>
Reviewed-by: Etienne Carriere <etienne.carriere@st.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20200518091222.27467-2-sudeep.holla@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Now we can use snprintf to do the UTF-16 to UTF-8 translation for the
command line.
Drop the special "zero" trick to handle an empty command line. This was
unnecessary even before this since with options_chars == 0,
efi_utf16_to_utf8 would not have accessed options at all. snprintf won't
access it either with a precision of 0.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200518190716.751506-25-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
efi_convert_cmdline currently overestimates the length of the equivalent
UTF-8 encoding.
snprintf can now be used to do the conversion to UTF-8, however, it does
not have a way to specify the size of the UTF-16 string, only the size
of the resulting UTF-8 string. So in order to use it, we need to
precalculate the exact UTF-8 size.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200518190716.751506-24-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
efi_printk can now handle the UTF-16 filename, so print it using efi_err
instead of a separate efi_char16_puts call.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200518190716.751506-23-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
In order to be able to use the UTF-16 support added to vsprintf in the
previous commit, enhance efi_puts to decode UTF-8 into UTF-16. Invalid
UTF-8 encodings are passed through unchanged.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200518190716.751506-22-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Add the required typedefs etc for using con_in's simple text input
protocol, and for using the boottime event services.
Also add the prototype for the "stall" boot service.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200518190716.751506-19-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Use the efi_printk function in efi_info/efi_err, and add efi_debug. This
allows formatted output at different log levels.
Add the notion of a loglevel instead of just quiet/not-quiet, and
parse the efi=debug kernel parameter in addition to quiet.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200520170223.GA3333632@rani.riverdale.lan/
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Use %ptT instead of open coded variant to print content of
time64_t type in human readable format.
Link: https://lore.kernel.org/r/20200415170046.33374-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Rewieved-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
The SDEI handler save/restores the addr_limit using set_fs(). It isn't
very clear why. The reason is to mirror the arch code's entry assembly.
The arch code does this because perf may access user-space, and
inheriting the addr_limit may be a problem.
Add a comment explaining why this is here.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Morse <james.morse@arm.com>
Link: https://bugs.chromium.org/p/project-zero/issues/detail?id=822
Link: https://lore.kernel.org/r/20200519182108.13693-4-james.morse@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
'chan_name' is malloced in imx_scu_probe() and should be freed
before leaving from the error handling cases, otherwise it will
cause memory leak.
Fixes: edbee095fa ("firmware: imx: add SCU firmware driver support")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The decompressor can load from anywhere in memory, and the only reason
the EFI stub code relocates it is to ensure it appears within the first
128 MiB of memory, so that the uncompressed kernel ends up at the right
offset in memory.
We can short circuit this, and simply jump into the decompressor startup
code at the point where it knows where the base of memory lives. This
also means there is no need to disable the MMU and caches, create new
page tables and re-enable them.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Nicolas Pitre <nico@fluxnic.net>
If we get an invalid conversion specifier, bail out instead of trying to
fix it up. The format string likely has a typo or assumed we support
something that we don't, in either case the remaining arguments won't
match up with the remaining format string.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200518190716.751506-16-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Consolidate the actual output of the formatted text into one place.
Fix a couple of edge cases:
1. If 0 is printed with a precision of 0, the printf specification says
that nothing should be output, with one exception (2b).
2. The specification for octal alternate format (%#o) adds the leading
zero not as a prefix as the 0x for hexadecimal is, but by increasing
the precision if necessary to add the zero. This means that
a. %#.2o turns 8 into "010", but 1 into "01" rather than "001".
b. %#.o prints 0 as "0" rather than "", unlike the situation for
decimal, hexadecimal and regular octal format, which all output an
empty string.
Reduce the space allocated for printing a number to the maximum actually
required (22 bytes for a 64-bit number in octal), instead of the 66
bytes previously allocated.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200518190716.751506-15-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
A negative precision should be ignored completely, and the presence of a
valid precision should turn off the 0 flag.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200518190716.751506-10-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Move flags parsing code out into a helper function.
The '%%' case can be handled up front: it is not allowed to have flags,
width etc.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200518190716.751506-9-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Support 'll' qualifier for long long by copying the decimal printing
code from lib/vsprintf.c. For simplicity, the 32-bit code is used on
64-bit architectures as well.
Support 'hh' qualifier for signed/unsigned char type integers.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200518190716.751506-8-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reclaim the bloat from the addition of printf by optimizing the stub for
size. With gcc 9, the text size of the stub is:
ARCH before +printf -Os
arm 35197 37889 34638
arm64 34883 38159 34479
i386 18571 21657 17025
x86_64 25677 29328 22144
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200518190716.751506-6-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Copy vsprintf from arch/x86/boot/printf.c to get a simple printf
implementation.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200518190716.751506-5-nivedita@alum.mit.edu
[ardb: add some missing braces in if...else clauses]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Use a buffer to convert the string to UTF-16. This will reduce the
number of firmware calls required to print the string from one per
character to one per string in most cases.
Cast the input char to unsigned char before converting to efi_char16_t
to avoid sign-extension in case there are any non-ASCII characters in
the input.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200518190716.751506-4-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
These functions do not support formatting, unlike printk. Rename them to
puts to make that clear.
Move the implementations of these two functions next to each other.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200518190716.751506-3-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Add #include directives for include files that efistub.h depends on,
instead of relying on them having been included by the C source files
prior to efistub.h.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200518190716.751506-2-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
This fixes the boot issues since 5.3 on several Dell models when the TPM
is enabled. Depending on the exact grub binary, booting the kernel would
freeze early, or just report an error parsing the final events log.
We get an event log in the SHA-1 format, which doesn't have a
tcg_efi_specid_event_head in the first event, and there is a final events
table which doesn't match the crypto agile format.
__calc_tpm2_event_size reads bad "count" and "efispecid->num_algs", and
either fails, or loops long enough for the machine to be appear frozen.
So we now only parse the final events table, which is per the spec always
supposed to be in the crypto agile format, when we got a event log in this
format.
Fixes: c46f340569 ("tpm: Reserve the TPM final events table")
Fixes: 166a2809d6 ("tpm: Don't duplicate events from the final event log in the TCG2 log")
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1779611
Signed-off-by: Loïc Yhuel <loic.yhuel@gmail.com>
Link: https://lore.kernel.org/r/20200512040113.277768-1-loic.yhuel@gmail.com
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Matthew Garrett <mjg59@google.com>
[ardb: warn when final events table is missing or in the wrong format]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Pull up arch-specific prototype efi_systab_show_arch() in order to
fix a -Wmissing-prototypes warning:
arch/x86/platform/efi/efi.c:957:7: warning: no previous prototype for
‘efi_systab_show_arch’ [-Wmissing-prototypes]
char *efi_systab_show_arch(char *str)
Signed-off-by: Benjamin Thiel <b.thiel@posteo.de>
Link: https://lore.kernel.org/r/20200516132647.14568-1-b.thiel@posteo.de
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
This contains core changes needed for the CPU frequency scaling and CPU
idle drivers on Tegra20 and Tegra30.
-----BEGIN PGP SIGNATURE-----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=7XEQ
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.8-arm-core' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/soc
ARM: tegra: Core changes for v5.8-rc1
This contains core changes needed for the CPU frequency scaling and CPU
idle drivers on Tegra20 and Tegra30.
* tag 'tegra-for-5.8-arm-core' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Create tegra20-cpufreq platform device on Tegra30
ARM: tegra: Don't enable PLLX while resuming from LP1 on Tegra30
ARM: tegra: Switch CPU to PLLP on resume from LP1 on Tegra30/114/124
ARM: tegra: Correct PL310 Auxiliary Control Register initialization
ARM: tegra: Do not fully reinitialize L2 on resume
ARM: tegra: Initialize r0 register for firmware wake-up
firmware: tf: Different way of L2 cache enabling after LP2 suspend
firmware: tegra: Make BPMP a regular driver
Link: https://lore.kernel.org/r/20200515145311.1580134-10-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Shadow stacks are not available in the EFI stub, filter out SCS flags.
Suggested-by: James Morse <james.morse@arm.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
If 'mfd_add_devices()' fails, we must undo 'zynqmp_pm_api_debugfs_init()'
otherwise some debugfs directory and files will be left.
Just move the call to 'zynqmp_pm_api_debugfs_init()' a few lines below to
fix the issue.
Fixes: e23d9c6d0d ("drivers: soc: xilinx: Add ZynqMP power domain driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lore.kernel.org/r/20200510130357.233364-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While debugging a boot failure, the following unknown error record was
seen in the boot logs.
<...>
BERT: Error records from previous boot:
[Hardware Error]: event severity: fatal
[Hardware Error]: Error 0, type: fatal
[Hardware Error]: section type: unknown, 81212a96-09ed-4996-9471-8d729c8e69ed
[Hardware Error]: section length: 0x290
[Hardware Error]: 00000000: 00000001 00000000 00000000 00020002 ................
[Hardware Error]: 00000010: 00020002 0000001f 00000320 00000000 ........ .......
[Hardware Error]: 00000020: 00000000 00000000 00000000 00000000 ................
[Hardware Error]: 00000030: 00000000 00000000 00000000 00000000 ................
<...>
On further investigation, it was found that the error record with
UUID (81212a96-09ed-4996-9471-8d729c8e69ed) has been defined in the
UEFI Specification at least since v2.4 and has recently had additional
fields defined in v2.7 Section N.2.10 Firmware Error Record Reference.
Add support for parsing and printing the defined fields to give users
a chance to figure out what went wrong.
Signed-off-by: Punit Agrawal <punit1.agrawal@toshiba.co.jp>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: James Morse <james.morse@arm.com>
Cc: linux-acpi@vger.kernel.org
Cc: linux-efi@vger.kernel.org
Link: https://lore.kernel.org/r/20200512045502.3810339-1-punit1.agrawal@toshiba.co.jp
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
In allocate_e820(), call the EFI get_memory_map() service directly
instead of indirectly via efi_get_memory_map(). This avoids allocation
of a buffer and return of the full EFI memory map, which is not needed
here and would otherwise need to be freed.
Routine allocate_e820() only needs to know how many EFI memory
descriptors there are in the map to allocate an adequately sized
e820ext buffer, if it's needed. Note that since efi_get_memory_map()
returns a memory map buffer sized with extra headroom, allocate_e820()
now needs to explicitly factor that into the e820ext size calculation.
Signed-off-by: Lenny Szubowicz <lszubowi@redhat.com>
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
On the Raspberry Pi 4, after a PCI reset, VL805's firmware may either be
loaded directly from an EEPROM or, if not present, by the SoC's
VideoCore. Inform VideoCore that VL805 was just reset.
Also, as this creates a dependency between USB_PCI and VideoCore's
firmware interface, and since USB_PCI can't be set as a module neither
this can. Reflect that on the firmware interface Kconfg.
Link: https://lore.kernel.org/r/20200505161318.26200-5-nsaenzjulienne@suse.de
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
The Raspberry Pi 4 gets its USB functionality from VL805, a PCIe chip
that implements xHCI. After a PCI reset, VL805's firmware may either be
loaded directly from an EEPROM or, if not present, by the SoC's
co-processor, VideoCore. RPi4's VideoCore OS contains both the non public
firmware load logic and the VL805 firmware blob. The function this patch
introduces triggers the aforementioned process.
Link: https://lore.kernel.org/r/20200505161318.26200-3-nsaenzjulienne@suse.de
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
i.MX8 SoCs DTS file needs system control macro definitions, so move them
into dt-binding headfile, then include/linux/firmware/imx/types.h can be
removed and those drivers using it should be changed accordingly.
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20200508210805.GA24170@embeddedor
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
When I play with terminus fonts I noticed the efi early printk does
not work because the earlycon code assumes font width is 8.
Here add the code to adapt with larger fonts. Tested with all kinds
of kernel built-in fonts on my laptop. Also tested with a local draft
patch for 14x28 !bold terminus font.
Signed-off-by: Dave Young <dyoung@redhat.com>
Link: https://lore.kernel.org/r/20200412024927.GA6884@dhcp-128-65.nay.redhat.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
It seems that for whatever reason, gcc-10 ends up not inlining a couple
of functions that used to be inlined before. Even if they only have one
single callsite - it looks like gcc may have decided that the code was
unlikely, and not worth inlining.
The code generation difference is harmless, but caused a few new section
mismatch errors, since the (now no longer inlined) function wasn't in
the __init section, but called other init functions:
Section mismatch in reference from the function kexec_free_initrd() to the function .init.text:free_initrd_mem()
Section mismatch in reference from the function tpm2_calc_event_log_size() to the function .init.text:early_memremap()
Section mismatch in reference from the function tpm2_calc_event_log_size() to the function .init.text:early_memunmap()
So add the appropriate __init annotation to make modpost not complain.
In both cases there were trivially just a single callsite from another
__init function.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When CONFIG_ARM_PSCI_FW is disabled but CONFIG_HAVE_ARM_SMCCC is enabled,
arm-scmi runs into a link failure:
arm-linux-gnueabi-ld: drivers/firmware/arm_scmi/smc.o: in function `smc_send_message':
smc.c:(.text+0x200): undefined reference to `arm_smccc_1_1_get_conduit'
Change from HAVE_ARM_SMCCC to ARM_PSCI_FW config dependency for now.
We rely on PSCI bindings anyways for the conduit and this should be
fine.
Link: https://lore.kernel.org/r/20200507144905.11397-1-sudeep.holla@arm.com
Fixes: 1dc6558062 ("firmware: arm_scmi: Add smc/hvc transport")
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
ASUS TF300T device may not work properly if firmware is asked to fully
re-initialize L2 cache after resume from LP2 suspend. The downstream
kernel of TF300T uses different opcode to enable cache after resuming
from LP2, this opcode also works fine on Nexus 7 and Ouya devices.
Supposedly, this may be needed by an older firmware versions.
Reported-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Tested-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Tested-by: Jasper Korten <jja2000@gmail.com>
Tested-by: David Heidelberg <david@ixit.cz>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
To help the compiler figure out that efi_printk() will not modify
the string it is given, make the input argument type const char*.
While at it, simplify the implementation as well.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
When building the x86 EFI stub with Clang, the libstub Makefile rules
that manipulate the ELF object files may throw an error like:
STUBCPY drivers/firmware/efi/libstub/efi-stub-helper.stub.o
strip: drivers/firmware/efi/libstub/efi-stub-helper.stub.o: Failed to find link section for section 10
objcopy: drivers/firmware/efi/libstub/efi-stub-helper.stub.o: Failed to find link section for section 10
This is the result of a LLVM feature [0] where symbol references are
stored in a LLVM specific .llvm_addrsig section in a non-transparent way,
causing generic ELF tools such as strip or objcopy to choke on them.
So force the compiler not to emit these sections, by passing the
appropriate command line option.
[0] https://sourceware.org/bugzilla/show_bug.cgi?id=23817
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Sami Tolvanen <samitolvanen@google.com>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Fangrui Song <maskray@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Commit
22090f84bc ("efi/libstub: unify EFI call wrappers for non-x86")
refactored the macros that are used to provide wrappers for mixed-mode
calls on x86, allowing us to boot a 64-bit kernel on 32-bit firmware.
Unfortunately, this broke mixed mode boot due to the fact that
efi_is_native() is not a macro on x86.
All of these macros should go together, so rather than testing each one
to see if it is defined, condition the generic macro definitions on a
new ARCH_HAS_EFISTUB_WRAPPERS, and remove the wrapper definitions on x86
as well if CONFIG_EFI_MIXED is not enabled.
Fixes: 22090f84bc ("efi/libstub: unify EFI call wrappers for non-x86")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200504150248.62482-1-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
As with most of the drivers, let us register this driver unconditionally
by dropping the checks for presence of firmware nodes(DT) or entries(ACPI).
Further, as mentioned in the commit acafce48b0 ("firmware: arm_sdei:
Fix DT platform device creation"), the core takes care of creation of
platform device when the appropriate device node is found and probe
is called accordingly.
Let us check only for the presence of ACPI firmware entry before creating
the platform device and flag warning if we fail.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: James Morse <james.morse@arm.com>
Cc: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20200422122823.1390-1-sudeep.holla@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
When building arm64 allmodconfig:
ERROR: modpost: "zynqmp_pm_fpga_load" [drivers/fpga/zynqmp-fpga.ko] undefined!
ERROR: modpost: "zynqmp_pm_fpga_get_status" [drivers/fpga/zynqmp-fpga.ko] undefined!
These functions were added to drivers/fpga/zynqmp-fpga.c but not
exported so the module build breaks. Export them so that they can be
used in modules properly.
Fixes: 4db8180ffe ("firmware: xilinx: Remove eemi ops for fpga related APIs")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/r/20200502025958.2714249-1-natechancellor@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
efi_parse_options can fail if it is unable to allocate space for a copy
of the command line. Check the return value to make sure it succeeded.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200430182843.2510180-12-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Factor out the initrd loading into a common function that can be called
both from the generic efi-stub.c and the x86-specific x86-stub.c.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200430182843.2510180-10-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Rename pr_efi to efi_info and pr_efi_err to efi_err to make it more
obvious that they are part of the EFI stub and not generic printk infra.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200430182843.2510180-4-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
In several places 64-bit values need to be split up into two 32-bit
fields, in order to be backward-compatible with the old 32-bit ABIs.
Instead of open-coding this, add a helper function to set a 64-bit value
as two 32-bit fields.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200430182843.2510180-3-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
struct boot_params is only 4096 bytes, not 16384. Fix this by using
sizeof(struct boot_params) instead of hardcoding the incorrect value.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200430182843.2510180-2-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Currently, setup_graphics() ignores the return value of efi_setup_gop(). As
AllocatePool() does not zero out memory, the screen information table will
contain uninitialized data in this case.
We should free the screen information table if efi_setup_gop() returns an
error code.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Link: https://lore.kernel.org/r/20200426194946.112768-1-xypron.glpk@gmx.de
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Add sysfs interface to set boot health status from user space.
Add API used by this interface to communicate with firmware.
If PMUFW is compiled with CHECK_HEALTHY_BOOT, it will check the
healthy bit on FPD WDT expiration. If healthy bit is set by a user
application running in Linux, PMUFW will do APU only restart. If
healthy bit is not set during FPD WDT expiration, PMUFW will do
system restart.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lore.kernel.org/r/1587761887-4279-26-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Linux shutdown functionality implemented via PSCI system_off does
not include an option to set a scope, i.e. which parts of the system to
shut down.
This patch creates sysfs that allows to set the shutdown scope for the
next shutdown request. When the next shutdown is performed, the platform
specific portion of PSCI-system_off can use the chosen shutdown scope.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Stefan Krsmanovic <stefan.krsmanovic@aggios.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lore.kernel.org/r/1587761887-4279-25-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add system shutdown API interface which asks firmware to
perform system shutdown/restart.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lore.kernel.org/r/1587761887-4279-24-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add firmware-ggs sysfs interface which provides read/write
interface to global storage registers.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lore.kernel.org/r/1587761887-4279-23-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use direct function call instead of using eemi ops for fpga related
APIs. Also remove eemi ops structure.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lore.kernel.org/r/1587761887-4279-21-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use direct function call instead of using eemi ops for
clock_getdivider.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lore.kernel.org/r/1587761887-4279-9-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use direct function call instead of using eemi ops for
clock_setdivider.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lore.kernel.org/r/1587761887-4279-8-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use direct function calls instead of using eemi ops. So remove
eemi ops for get_api_version and use direct function call.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lore.kernel.org/r/1587761887-4279-2-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Intel service layer driver has defined error codes for the
specific services, which started from FPGA configuration then RSU
(Remote Status Update).
Intel service layer driver should define the standard error codes
rather than keep adding more error codes for the new services.
The standard error codes will be used by all the clients of Intel service
layer driver.
Replace FPGA and RSU specific error codes with Intel service layer’s
Common error codes.
Signed-off-by: Richard Gong <richard.gong@intel.com>
Link: https://lore.kernel.org/r/1586897274-307-2-git-send-email-richard.gong@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here are some small firmware/driver core/debugfs fixes for 5.7-rc3.
The debugfs change is now possible as now the last users of
debugfs_create_u32() have been fixed up in the different trees that got
merged into 5.7-rc1, and I don't want it creeping back in.
The firmware changes did cause a regression in linux-next, so the final
patch here reverts part of that, re-exporting the symbol to resolve that
issue. All of these patches, with the exception of the final one, have
been in linux-next with only that one reported issue.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXqVliw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymf6ACfS5HoPt+kWKtfKteN/mt6WUeJz6oAoMDg4Qvf
4ncqmH9jt0lj5NAwHxFi
=DP2q
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are some small firmware/driver core/debugfs fixes for 5.7-rc3.
The debugfs change is now possible as now the last users of
debugfs_create_u32() have been fixed up in the different trees that
got merged into 5.7-rc1, and I don't want it creeping back in.
The firmware changes did cause a regression in linux-next, so the
final patch here reverts part of that, re-exporting the symbol to
resolve that issue. All of these patches, with the exception of the
final one, have been in linux-next with only that one reported issue"
* tag 'driver-core-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
firmware_loader: revert removal of the fw_fallback_config export
debugfs: remove return value of debugfs_create_u32()
firmware_loader: remove unused exports
firmware: imx: fix compile-testing
Commit:
cf6b836648 ("efi/libstub: Make initrd file loader configurable")
inadvertently disabled support on x86 for loading an initrd passed via
the initrd= option on the kernel command line.
Add X86 to the newly introduced Kconfig option's title and depends
declarations, so it gets enabled by default, as before.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: linux-efi@vger.kernel.org
Instead of making match_config_table() test its table_types pointer for
NULL-ness, omit the call entirely if no arch_tables pointer was provided
to efi_config_parse_tables().
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Increase legibility by adding whitespace to the efi_config_table_type_t
arrays that describe which EFI config tables we look for when going over
the firmware provided list. While at it, replace the 'name' char pointer
with a char array, which is more space efficient on relocatable 64-bit
kernels, as it avoids a 8 byte pointer and the associated relocation
data (24 bytes when using RELA format)
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
We no longer need to take special care when using global variables
in the EFI stub, so switch to a simple symbol reference for efi_is64.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The practice of using __pure getter functions to access global
variables in the EFI stub dates back to the time when we had to
carefully prevent GOT entries from being emitted, because we
could not rely on the toolchain to do this for us.
Today, we use the hidden visibility pragma for all EFI stub source
files, which now all live in the same subdirectory, and we apply a
sanity check on the objects, so we can get rid of these getter
functions and simply refer to global data objects directly.
So switch over the remaining boolean variables carrying options set
on the kernel command line.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The practice of using __pure getter functions to access global
variables in the EFI stub dates back to the time when we had to
carefully prevent GOT entries from being emitted, because we
could not rely on the toolchain to do this for us.
Today, we use the hidden visibility pragma for all EFI stub source
files, which now all live in the same subdirectory, and we apply a
sanity check on the objects, so we can get rid of these getter
functions and simply refer to global data objects directly.
Start with efi_system_table(), and convert it into a global variable.
While at it, make it a pointer-to-const, because we can.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Now that both arm and x86 are using the linker script to place the EFI
stub's global variables in the correct section, remove __efistub_global.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20200416151227.3360778-4-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Instead of using __efistub_global to force variables into the .data
section, leave them in the .bss but pull the EFI stub's .bss section
into .data in the linker script for the compressed kernel.
Add relocation checking for x86 as well to catch non-PC-relative
relocations that require runtime processing, since the EFI stub does not
do any runtime relocation processing.
This will catch, for example, data relocations created by static
initializers of pointers.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200416151227.3360778-3-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Instead of using __efistub_global to force variables into the .data
section, leave them in the .bss but pull the EFI stub's .bss section
into .data in the linker script for the compressed kernel.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20200416151227.3360778-2-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Move efi_relocate_kernel() into a separate source file, so that it
only gets pulled into builds for architectures that use it. Since
efi_relocate_kernel() is the only user of efi_low_alloc(), let's
move that over as well.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
It is no longer necessary to locate the kernel as low as possible in
physical memory, and so we can switch from efi_low_alloc() [which is
a rather nasty concoction on top of GetMemoryMap()] to a new helper
called efi_allocate_pages_aligned(), which simply rounds up the size
to account for the alignment, and frees the misaligned pages again.
So considering that the kernel can live anywhere in the physical
address space, as long as its alignment requirements are met, let's
switch to efi_allocate_pages_aligned() to allocate the pages.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Break out the code to create an aligned page allocation from mem.c
and move it into a function efi_allocate_pages_aligned() in alignedmem.c.
Update efi_allocate_pages() to invoke it unless the minimum alignment
equals the EFI page size (4 KB), in which case the ordinary page
allocator is sufficient. This way, efi_allocate_pages_aligned() will
only be pulled into the build if it is actually being used (which will
be on arm64 only in the immediate future)
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The KASLR code path in the arm64 version of the EFI stub incorporates
some overly complicated logic to randomly allocate a region of the right
alignment: there is no need to randomize the placement of the kernel
modulo 2 MiB separately from the placement of the 2 MiB aligned allocation
itself - we can simply follow the same logic used by the non-randomized
placement, which is to allocate at the correct alignment, and only take
TEXT_OFFSET into account if it is not a round multiple of the alignment.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The notion of a 'preferred' load offset for the kernel dates back to the
times when the kernel's primary mapping overlapped with the linear region,
and memory below it could not be used at all.
Today, the arm64 kernel does not really care where it is loaded in physical
memory, as long as the alignment requirements are met, and so there is no
point in unconditionally moving the kernel to a new location in memory at
boot. Instead, we can
- check for a KASLR seed, and randomly reallocate the kernel if one is
provided
- otherwise, check whether the alignment requirements are met for the
current placement of the kernel, and just run it in place if they are
- finally, do an ordinary page allocation and reallocate the kernel to a
suitably aligned buffer anywhere in memory.
By the same reasoning, there is no need to take TEXT_OFFSET into account
if it is a round multiple of the minimum alignment, which is the usual
case for relocatable kernels with TEXT_OFFSET randomization disabled.
Otherwise, it suffices to use the relative misaligment of TEXT_OFFSET
when reallocating the kernel.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The implementation of efi_random_alloc() arbitrarily truncates the
provided random seed to 16 bits, which limits the granularity of the
randomly chosen allocation offset in memory. This is currently only
an issue if the size of physical memory exceeds 128 GB, but going
forward, we will reduce the allocation alignment to 64 KB, and this
means we need to increase the granularity to ensure that the random
memory allocations are distributed evenly.
We will need to switch to 64-bit arithmetic for the multiplication,
but this does not result in 64-bit integer intrinsic calls on ARM or
on i386.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The EFI stub uses a per-architecture #define for the minimum base
and size alignment of page allocations, which is set to 4 KB for
all architecures except arm64, which uses 64 KB, to ensure that
allocations can always be (un)mapped efficiently, regardless of
the page size used by the kernel proper, which could be a kexec'ee
The API wrappers around page based allocations assume that this
alignment is always taken into account, and so efi_free() will
also round up its size argument to EFI_ALLOC_ALIGN.
Currently, efi_random_alloc() does not honour this alignment for
the allocated size, and so freeing such an allocation may result
in unrelated memory to be freed, potentially leading to issues
after boot. So let's round up size in efi_random_alloc() as well.
Fixes: 2ddbfc81ea ("efi: stub: add implementation of efi_random_alloc()")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Add the ability to automatically pick the highest resolution video mode
(defined as the product of vertical and horizontal resolution) by using
a command-line argument of the form
video=efifb:auto
If there are multiple modes with the highest resolution, pick one with
the highest color depth.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200328160601.378299-2-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Extend the video mode argument to handle an optional color depth
specification of the form
video=efifb:<xres>x<yres>[-(rgb|bgr|<bpp>)]
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200320020028.1936003-14-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Add the ability to choose a video mode for the selected gop by using a
command-line argument of the form
video=efifb:mode=<n>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200320020028.1936003-12-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
pixel_format must be one of
PIXEL_RGB_RESERVED_8BIT_PER_COLOR
PIXEL_BGR_RESERVED_8BIT_PER_COLOR
PIXEL_BIT_MASK
since we skip PIXEL_BLT_ONLY when finding a gop.
Remove the redundant code and add another check in find_gop to skip any
pixel formats that we don't know about, in case a later version of the
UEFI spec adds one.
Reformat the code a little.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200320020028.1936003-10-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Use the __ffs/__fls macros to calculate the position and size of the
mask.
Correct type of mask to u32 instead of unsigned long.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200320020028.1936003-9-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Move extraction of the mode information parameters outside the loop to
find the gop, and eliminate some redundant variables.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200320020028.1936003-4-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Fix the following sparse warning:
drivers/firmware/efi/libstub/arm-stub.c:68:6: warning:
symbol 'install_memreserve_table' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Link: https://lore.kernel.org/r/1587643713-28169-1-git-send-email-zou_wei@huawei.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
We have wrappers around EFI calls so that x86 can define special
versions for mixed mode, while all other architectures can use the
same simple definition that just issues the call directly.
In preparation for the arrival of yet another architecture that doesn't
need anything special here (RISC-V), let's move the default definition
into a shared header.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Loading an initrd passed via the kernel command line is deprecated: it
is limited to files that reside in the same volume as the one the kernel
itself was loaded from, and we have more flexible ways to achieve the
same. So make it configurable so new architectures can decide not to
enable it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
A few smaller fixes for v5.7-rc3: The majority are fixes for bugs I found
after restarting my randconfig build testing that had been dormant for
a while.
On the Nokia N950/N9 phone, a DT fix is required to address a boot
regression.
For the bcm283x (Raspberry Pi), two DT fixes address minor issues.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=K1jH
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"A few smaller fixes for v5.7-rc3: The majority are fixes for bugs I
found after restarting my randconfig build testing that had been
dormant for a while.
On the Nokia N950/N9 phone, a DT fix is required to address a boot
regression.
For the bcm283x (Raspberry Pi), two DT fixes address minor issues"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
soc: imx8: select SOC_BUS
soc: tegra: fix tegra_pmc_get_suspend_mode definition
soc: fsl: dpio: avoid stack usage warning
soc: fsl: dpio: fix incorrect pointer conversions
ARM: imx: provide v7_cpu_resume() only on ARM_CPU_SUSPEND=y
ARM: dts: bcm283x: Disable dsi0 node
firmware: xilinx: make firmware_debugfs_root static
drivers: soc: xilinx: fix firmware driver Kconfig dependency
ARM: dts: bcm283x: Add cells encoding format to firmware bus
ARM: dts: OMAP3: disable RNG on N950/N9
The header of the message to send can be changed if the
response is longer than the request:
- 1st word, the header is sent
- the remaining words of the message are sent
- the response is received asynchronously during the
execution of the loop, changing the size field in
the header
- the for loop test the termination condition using
the corrupted header
It is the case for the API build_info which has just a
header as request but 3 words in response.
This issue is fixed storing the header locally instead of
using a pointer on it.
Fixes: edbee095fa (firmware: imx: add SCU firmware driver support)
Signed-off-by: Franck LENORMAND <franck.lenormand@nxp.com>
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Cc: stable@vger.kernel.org
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Most of the arm-stub code is written in an architecture independent manner.
As a result, RISC-V can reuse most of the arm-stub code.
Rename the arm-stub.c to efi-stub.c so that ARM, ARM64 and RISC-V can use it.
This patch doesn't introduce any functional changes.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Link: https://lore.kernel.org/r/20200415195422.19866-2-atish.patra@wdc.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The Tegra BPMP driver typically ends up deferring probe because it wants
to attach to the SMMU, so there's little sense in registering it at the
core init-level.
One side-effect of this is that the driver will be probed later even if
it doesn't want to attach to an SMMU, which means that consumers will
end up deferring probe, which in turn takes care of ordering the suspend
and resume queue in the correct way. Currently since suspend/resume
order depends on instantiation order, and because BPMP is listed at the
very end of the device tree (after most of its consumers), the suspend
and resume queue is ordered wrongly, which can cause issues for drivers
(like I2C) which suspend after and resume before BPMP. In the case of
I2C this typically leads to the clock failing to enable.
Besides fixing this suspend/resume ordering issue, this also has the
added benefit of allowing the driver to be built as a loadable module,
which can help decrease the size of multiplatform kernel.
Signed-off-by: Thierry Reding <treding@nvidia.com>
As far as the device is concerned the dma address is the physical
address. There is no need to convert it to a physical address,
especially not using dma-direct internals that are not available
to drivers and which will interact badly with IOMMUs. Last but not
least the commit introducing it claimed to just fix a type issue,
but actually changed behavior.
Fixes: 6e37ccf78a ("firmware: qcom_scm: Use proper types for dma mappings")
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20200414123136.441454-1-hch@lst.de
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The '>' expression itself is bool, no need to convert it to bool again.
This fixes the following coccicheck warning:
drivers/firmware/qcom_scm.c:946:25-30: WARNING: conversion to bool not
needed here
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20200420123516.7888-1-yanaijie@huawei.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
