API:
- Add linear akcipher/sig API.
- Add tfm cloning (hmac, cmac).
- Add statesize to crypto_ahash.
Algorithms:
- Allow only odd e and restrict value in FIPS mode for RSA.
- Replace LFSR with SHA3-256 in jitter.
- Add interface for gathering of raw entropy in jitter.
Drivers:
- Fix race on data_avail and actual data in hwrng/virtio.
- Add hash and HMAC support in starfive.
- Add RSA algo support in starfive.
- Add support for PCI device 0x156E in ccp.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEn51F/lCuNhUwmDeSxycdCkmxi6cFAmSdECcACgkQxycdCkmx
i6dW3g//a4DR6aaqYF8pU4svAzO56a0Plx3DVHUiJ4ygRB7xOzrQqXjCren6wY2a
LFuetwxebAhIAPsC79vI+3j8VAIlU9cNVqOxBIJHGY7wFO4m1AjqBjlealzqLrth
+nEIeUibqLeRw7imOO4adzSsKuSQgyU5rPtKWfrGqqI3RhuMgfWroCtmJ82jmq5l
uMZgB+aGGkzyXztxubHRPeJ3nOFEzo95SscpJ43lOjMcURRBhEa+20jXDhUGwpI7
9ycFV31AW+tfkIprAcliiIzZuwIbzlCkte6AxjAVsN100T/wh9JS1Y+uf1P0oZ9y
AUQQKyc8/QpSkzHZPTncat5P6zta28r8Q5neCvEEEGGuOE8Oc6kb0Os+RE5ANMU4
2A/zrKGOMIWeEWwXGc51xT3gxyl/Rn5wLw1pW7Lm4d5osGT9jiVXx/g66hKLpagJ
jegI6CqgvUajkRNi7JPVnSAauu0Ay8O6pU37/8gLOXNGVZBqONpRimk9qB05LNSF
QYzM2sgYv1tQEmjnG8jLhF5Z8brnqYTv2TZwBX43W10EDQNqUYUDff9Flean5xCb
+2mxJc81rgtUffnMXyYvQwKLhVKoLpeLR6Ts455S5aP06WAfoyEJyYTA/LHG24GX
H2HdS9g5y/K15k9yygMWaXgAx7O7MjM9gEa2VQakhnByj/eQM0s=
=rOLu
-----END PGP SIGNATURE-----
Merge tag 'v6.5-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Add linear akcipher/sig API
- Add tfm cloning (hmac, cmac)
- Add statesize to crypto_ahash
Algorithms:
- Allow only odd e and restrict value in FIPS mode for RSA
- Replace LFSR with SHA3-256 in jitter
- Add interface for gathering of raw entropy in jitter
Drivers:
- Fix race on data_avail and actual data in hwrng/virtio
- Add hash and HMAC support in starfive
- Add RSA algo support in starfive
- Add support for PCI device 0x156E in ccp"
* tag 'v6.5-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (85 commits)
crypto: akcipher - Do not copy dst if it is NULL
crypto: sig - Fix verify call
crypto: akcipher - Set request tfm on sync path
crypto: sm2 - Provide sm2_compute_z_digest when sm2 is disabled
hwrng: imx-rngc - switch to DEFINE_SIMPLE_DEV_PM_OPS
hwrng: st - keep clock enabled while hwrng is registered
hwrng: st - support compile-testing
hwrng: imx-rngc - fix the timeout for init and self check
KEYS: asymmetric: Use new crypto interface without scatterlists
KEYS: asymmetric: Move sm2 code into x509_public_key
KEYS: Add forward declaration in asymmetric-parser.h
crypto: sig - Add interface for sign/verify
crypto: akcipher - Add sync interface without SG lists
crypto: cipher - On clone do crypto_mod_get()
crypto: api - Add __crypto_alloc_tfmgfp
crypto: api - Remove crypto_init_ops()
crypto: rsa - allow only odd e and restrict value in FIPS mode
crypto: geniv - Split geniv out of AEAD Kconfig option
crypto: algboss - Add missing dependency on RNG2
crypto: starfive - Add RSA algo support
...
As signature verification has a NULL destination buffer, the pointer
needs to be checked before the memcpy is done.
Fixes: addde1f2c9 ("crypto: akcipher - Add sync interface without SG lists")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The dst SG list needs to be set to NULL for verify calls. Do
this as otherwise the underlying algorithm may fail.
Furthermore the digest needs to be copied just like the source.
Fixes: 6cb8815f41 ("crypto: sig - Add interface for sign/verify")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The sm2 certificate requires a modified digest. Move the code
for the hashing from the signature verification path into the
code where we generate the digest.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Split out the sign/verify functionality from the existing akcipher
interface. Most algorithms in akcipher either support encryption
and decryption, or signing and verify. Only one supports both.
As a signature algorithm may not support encryption at all, these
two should be spearated.
For now sig is simply a wrapper around akcipher as all algorithms
remain unchanged. This is a first step and allows users to start
allocating sig instead of akcipher.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The only user of akcipher does not use SG lists. Therefore forcing
users to use SG lists only results unnecessary overhead. Add a new
interface that supports arbitrary kernel pointers.
For the time being the copy will be performed unconditionally. But
this will go away once the underlying interface is updated.
Note also that only encryption and decryption is addressed by this
patch as sign/verify will go into a new interface (sig).
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The refcounter of underlying algorithm should be incremented, otherwise
it'll be destroyed with the cloned cipher, wrecking the original cipher.
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use it straight away in crypto_clone_cipher(), as that is not meant to
sleep.
Fixes: 51d8d6d0f4 ("crypto: cipher - Add crypto_clone_cipher")
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Purge crypto_type::init() as well.
The last user seems to be gone with commit d63007eb95 ("crypto:
ablkcipher - remove deprecated and unused ablkcipher support").
Signed-off-by: Dmitry Safonov <dima@arista.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
check if rsa public exponent is odd and check its value is between
2^16 < e < 2^256.
FIPS 186-5 DSS (page 35)[1] specify that:
1. The public exponent e shall be selected with the following constraints:
(a) The public verification exponent e shall be selected prior to
generating the primes, p and q, and the private signature exponent
d.
(b) The exponent e shall be an odd positive integer such that:
2^16 < e < 2^256.
[1] https://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.186-5.pdf
Signed-off-by: Mahmoud Adam <mngyadam@amazon.com>
Reviewed-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Give geniv its own Kconfig option so that its dependencies are
distinct from that of the AEAD API code. This also allows it
to be disabled if no IV generators (seqiv/echainiv) are enabled.
Remove the obsolete select on RNG2 by SKCIPHER2 as skcipher IV
generators disappeared long ago.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The testmgr code uses crypto_rng without depending on it. Add
an explicit dependency to Kconfig.
Also sort the MANAGER2 dependencies alphabetically.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When af_alg_sendmsg() calls extract_iter_to_sg(), it passes MAX_SGL_ENTS as
the maximum number of elements that may be written to, but some of the
elements may already have been used (as recorded in sgl->cur), so
extract_iter_to_sg() may end up overrunning the scatterlist.
Fix this to limit the number of elements to "MAX_SGL_ENTS - sgl->cur".
Note: It probably makes sense in future to alter the behaviour of
extract_iter_to_sg() to stop if "sgtable->nents >= sg_max" instead, but
this is a smaller fix for now.
The bug causes errors looking something like:
BUG: KASAN: slab-out-of-bounds in sg_assign_page include/linux/scatterlist.h:109 [inline]
BUG: KASAN: slab-out-of-bounds in sg_set_page include/linux/scatterlist.h:139 [inline]
BUG: KASAN: slab-out-of-bounds in extract_bvec_to_sg lib/scatterlist.c:1183 [inline]
BUG: KASAN: slab-out-of-bounds in extract_iter_to_sg lib/scatterlist.c:1352 [inline]
BUG: KASAN: slab-out-of-bounds in extract_iter_to_sg+0x17a6/0x1960 lib/scatterlist.c:1339
Fixes: bf63e250c4 ("crypto: af_alg: Support MSG_SPLICE_PAGES")
Reported-by: syzbot+6efc50cc1f8d718d6cb7@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/000000000000b2585a05fdeb8379@google.com/
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: syzbot+6efc50cc1f8d718d6cb7@syzkaller.appspotmail.com
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-crypto@vger.kernel.org
cc: netdev@vger.kernel.org
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
The following checkpatch warning has been fixed:
- WARNING: Missing a blank line after declarations
Signed-off-by: Franziska Naepelt <franziska.naepelt@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Cross-merge networking fixes after downstream PR.
Conflicts:
net/sched/sch_taprio.c
d636fc5dd6 ("net: sched: add rcu annotations around qdisc->qdisc_sleeping")
dced11ef84 ("net/sched: taprio: don't overwrite "sch" variable in taprio_dump_class_stats()")
net/ipv4/sysctl_net_ipv4.c
e209fee411 ("net/ipv4: ping_group_range: allow GID from 2147483648 to 4294967294")
ccce324dab ("tcp: make the first N SYN RTO backoffs linear")
https://lore.kernel.org/all/20230605100816.08d41a7b@canb.auug.org.au/
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make AF_ALG sendmsg() support MSG_SPLICE_PAGES in the hashing code. This
causes pages to be spliced from the source iterator if possible.
This allows ->sendpage() to be replaced by something that can handle
multiple multipage folios in a single transaction.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-crypto@vger.kernel.org
cc: netdev@vger.kernel.org
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Convert af_alg_sendpage() to use sendmsg() with MSG_SPLICE_PAGES rather
than directly splicing in the pages itself.
This allows ->sendpage() to be replaced by something that can handle
multiple multipage folios in a single transaction.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-crypto@vger.kernel.org
cc: netdev@vger.kernel.org
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Make AF_ALG sendmsg() support MSG_SPLICE_PAGES. This causes pages to be
spliced from the source iterator.
This allows ->sendpage() to be replaced by something that can handle
multiple multipage folios in a single transaction.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-crypto@vger.kernel.org
cc: netdev@vger.kernel.org
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Put the loop in af_alg_sendmsg() into an if-statement to indent it to make
the next patch easier to review as that will add another branch to handle
MSG_SPLICE_PAGES to the if-statement.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-crypto@vger.kernel.org
cc: netdev@vger.kernel.org
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use extract_iter_to_sg() to decant the destination iterator into a
scatterlist in af_alg_get_rsgl(). af_alg_make_sg() can then be removed.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-crypto@vger.kernel.org
cc: netdev@vger.kernel.org
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Convert AF_ALG to use iov_iter_extract_pages() instead of
iov_iter_get_pages(). This will pin pages or leave them unaltered rather
than getting a ref on them as appropriate to the iterator.
The pages need to be pinned for DIO-read rather than having refs taken on
them to prevent VM copy-on-write from malfunctioning during a concurrent
fork() (the result of the I/O would otherwise end up only visible to the
child process and not the parent).
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-crypto@vger.kernel.org
cc: netdev@vger.kernel.org
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit ac4e97abce ("scatterlist: sg_set_buf() argument must be in linear
mapping") checks that both the signature and the digest reside in the
linear mapping area.
However, more recently commit ba14a194a4 ("fork: Add generic vmalloced
stack support") made it possible to move the stack in the vmalloc area,
which is not contiguous, and thus not suitable for sg_set_buf() which needs
adjacent pages.
Always make a copy of the signature and digest in the same buffer used to
store the key and its parameters, and pass them to sg_init_one(). Prefer it
to conditionally doing the copy if necessary, to keep the code simple. The
buffer allocated with kmalloc() is in the linear mapping area.
Cc: stable@vger.kernel.org # 4.9.x
Fixes: ba14a194a4 ("fork: Add generic vmalloced stack support")
Link: https://lore.kernel.org/linux-integrity/Y4pIpxbjBdajymBJ@sol.localdomain/
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
With the update of the permanent and intermittent health errors, the
actual indicator for the health test indicates a potential error only
for the one offending time stamp gathered in the current iteration
round. The next iteration round will "overwrite" the health test result.
Thus, the entropy collection loop in jent_gen_entropy checks for
the health test failure upon each loop iteration. However, the
initialization operation checked for the APT health test once for
an APT window which implies it would not catch most errors.
Thus, the check for all health errors is now invoked unconditionally
during each loop iteration for the startup test.
With the change, the error JENT_ERCT becomes unused as all health
errors are only reported with the JENT_HEALTH return code. This
allows the removal of the error indicator.
Fixes: 3fde2fe99a ("crypto: jitter - permanent and intermittent health errors"
)
Reported-by: Joachim Vandersmissen <git@jvdsn.com>
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Make the help text for CRYPTO_STATS explicitly mention that it reduces
the performance of the crypto API.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Some shash algorithms are so simple that they don't have an init_tfm
function. These can be cloned trivially. Check this before failing
in crypto_clone_shash.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Allow cmac to be cloned. The underlying cipher needs to support
cloning by not having a cra_init function (all implementations of
aes that do not require a fallback can be cloned).
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Allow simple ciphers to be cloned, if they don't have a cra_init
function. This basically rules out those ciphers that require a
fallback.
In future simple ciphers will be eliminated, and replaced with a
linear skcipher interface. When that happens this restriction will
disappear.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use the modern init_tfm/exit_tfm interface instead of the obsolete
cra_init/cra_exit interface.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
gcc warns if prototypes are only visible to the caller but
not the callee:
crypto/aegis128-neon-inner.c:134:6: warning: no previous prototype for 'crypto_aegis128_init_neon' [-Wmissing-prototypes]
crypto/aegis128-neon-inner.c:164:6: warning: no previous prototype for 'crypto_aegis128_update_neon' [-Wmissing-prototypes]
crypto/aegis128-neon-inner.c:221:6: warning: no previous prototype for 'crypto_aegis128_encrypt_chunk_neon' [-Wmissing-prototypes]
crypto/aegis128-neon-inner.c:270:6: warning: no previous prototype for 'crypto_aegis128_decrypt_chunk_neon' [-Wmissing-prototypes]
crypto/aegis128-neon-inner.c:316:5: warning: no previous prototype for 'crypto_aegis128_final_neon' [-Wmissing-prototypes]
The prototypes cannot be in the regular aegis.h, as the inner neon code
cannot include normal kernel headers. Instead add a new header just for
the functions provided by this file.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The test interface allows a privileged process to capture the raw
unconditioned noise that is collected by the Jitter RNG for statistical
analysis. Such testing allows the analysis how much entropy
the Jitter RNG noise source provides on a given platform. The obtained
data is the time stamp sampled by the Jitter RNG. Considering that
the Jitter RNG inserts the delta of this time stamp compared to the
immediately preceding time stamp, the obtained data needs to be
post-processed accordingly to obtain the data the Jitter RNG inserts
into its entropy pool.
The raw entropy collection is provided to obtain the raw unmodified
time stamps that are about to be added to the Jitter RNG entropy pool
and are credited with entropy. Thus, this patch adds an interface
which renders the Jitter RNG insecure. This patch is NOT INTENDED
FOR PRODUCTION SYSTEMS, but solely for development/test systems to
verify the available entropy rate.
Access to the data is given through the jent_raw_hires debugfs file.
The data buffer should be multiples of sizeof(u32) to fill the entire
buffer. Using the option jitterentropy_testing.boot_raw_hires_test=1
the raw noise of the first 1000 entropy events since boot can be
sampled.
This test interface allows generating the data required for
analysis whether the Jitter RNG is in compliance with SP800-90B
sections 3.1.3 and 3.1.4.
If the test interface is not compiled, its code is a noop which has no
impact on the performance.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Using the kernel crypto API, the SHA3-256 algorithm is used as
conditioning element to replace the LFSR in the Jitter RNG. All other
parts of the Jitter RNG are unchanged.
The application and use of the SHA-3 conditioning operation is identical
to the user space Jitter RNG 3.4.0 by applying the following concept:
- the Jitter RNG initializes a SHA-3 state which acts as the "entropy
pool" when the Jitter RNG is allocated.
- When a new time delta is obtained, it is inserted into the "entropy
pool" with a SHA-3 update operation. Note, this operation in most of
the cases is a simple memcpy() onto the SHA-3 stack.
- To cause a true SHA-3 operation for each time delta operation, a
second SHA-3 operation is performed hashing Jitter RNG status
information. The final message digest is also inserted into the
"entropy pool" with a SHA-3 update operation. Yet, this data is not
considered to provide any entropy, but it shall stir the entropy pool.
- To generate a random number, a SHA-3 final operation is performed to
calculate a message digest followed by an immediate SHA-3 init to
re-initialize the "entropy pool". The obtained message digest is one
block of the Jitter RNG that is returned to the caller.
Mathematically speaking, the random number generated by the Jitter RNG
is:
aux_t = SHA-3(Jitter RNG state data)
Jitter RNG block = SHA-3(time_i || aux_i || time_(i-1) || aux_(i-1) ||
... || time_(i-255) || aux_(i-255))
when assuming that the OSR = 1, i.e. the default value.
This operation implies that the Jitter RNG has an output-blocksize of
256 bits instead of the 64 bits of the LFSR-based Jitter RNG that is
replaced with this patch.
The patch also replaces the varying number of invocations of the
conditioning function with one fixed number of invocations. The use
of the conditioning function consistent with the userspace Jitter RNG
library version 3.4.0.
The code is tested with a system that exhibited the least amount of
entropy generated by the Jitter RNG: the SiFive Unmatched RISC-V
system. The measured entropy rate is well above the heuristically
implied entropy value of 1 bit of entropy per time delta. On all other
tested systems, the measured entropy rate is even higher by orders
of magnitude. The measurement was performed using updated tooling
provided with the user space Jitter RNG library test framework.
The performance of the Jitter RNG with this patch is about en par
with the performance of the Jitter RNG without the patch.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As ahash drivers may need to use fallbacks, their state size
is thus variable. Deal with this by making it an attribute
of crypto_ahash.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
- A long-standing bug in crypto_engine.
- A buggy but harmless check in the sun8i-ss driver.
- A regression in the CRYPTO_USER interface.
-----BEGIN PGP SIGNATURE-----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=9Us7
-----END PGP SIGNATURE-----
Merge tag 'v6.4-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
- A long-standing bug in crypto_engine
- A buggy but harmless check in the sun8i-ss driver
- A regression in the CRYPTO_USER interface
* tag 'v6.4-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: api - Fix CRYPTO_USER checks for report function
crypto: engine - fix crypto_queue backlog handling
crypto: sun8i-ss - Fix a test in sun8i_ss_setup_ivs()
1, Better backtraces for humanization;
2, Relay BCE exceptions to userland as SIGSEGV;
3, Provide kernel fpu functions;
4, Optimize memory ops (memset/memcpy/memmove);
5, Optimize checksum and crc32(c) calculation;
6, Add ARCH_HAS_FORTIFY_SOURCE selection;
7, Add function error injection support;
8, Add ftrace with direct call support;
9, Add basic perf tools support.
-----BEGIN PGP SIGNATURE-----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=3aTV
-----END PGP SIGNATURE-----
Merge tag 'loongarch-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Better backtraces for humanization
- Relay BCE exceptions to userland as SIGSEGV
- Provide kernel fpu functions
- Optimize memory ops (memset/memcpy/memmove)
- Optimize checksum and crc32(c) calculation
- Add ARCH_HAS_FORTIFY_SOURCE selection
- Add function error injection support
- Add ftrace with direct call support
- Add basic perf tools support
* tag 'loongarch-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (24 commits)
tools/perf: Add basic support for LoongArch
LoongArch: ftrace: Add direct call trampoline samples support
LoongArch: ftrace: Add direct call support
LoongArch: ftrace: Implement ftrace_find_callable_addr() to simplify code
LoongArch: ftrace: Fix build error if DYNAMIC_FTRACE_WITH_REGS is not set
LoongArch: ftrace: Abstract DYNAMIC_FTRACE_WITH_ARGS accesses
LoongArch: Add support for function error injection
LoongArch: Add ARCH_HAS_FORTIFY_SOURCE selection
LoongArch: crypto: Add crc32 and crc32c hw acceleration
LoongArch: Add checksum optimization for 64-bit system
LoongArch: Optimize memory ops (memset/memcpy/memmove)
LoongArch: Provide kernel fpu functions
LoongArch: Relay BCE exceptions to userland as SIGSEGV with si_code=SEGV_BNDERR
LoongArch: Tweak the BADV and CPUCFG.PRID lines in show_regs()
LoongArch: Humanize the ESTAT line when showing registers
LoongArch: Humanize the ECFG line when showing registers
LoongArch: Humanize the EUEN line when showing registers
LoongArch: Humanize the PRMD line when showing registers
LoongArch: Humanize the CRMD line when showing registers
LoongArch: Fix format of CSR lines during show_regs()
...
Checking the config via ifdef incorrectly compiles out the report
functions when CRYPTO_USER is set to =m. Fix it by using IS_ENABLED()
instead.
Fixes: c0f9e01dd2 ("crypto: api - Check CRYPTO_USER instead of NET for report")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
With a blatant copy of some MIPS bits we introduce the crc32 and crc32c
hw accelerated module to LoongArch.
LoongArch has provided these instructions to calculate crc32 and crc32c:
* crc.w.b.w crcc.w.b.w
* crc.w.h.w crcc.w.h.w
* crc.w.w.w crcc.w.w.w
* crc.w.d.w crcc.w.d.w
So we can make use of these instructions to improve the performance of
calculation for crc32(c) checksums.
As can be seen from the following test results, crc32(c) instructions
can improve the performance by 58%.
Software implemention Hardware acceleration
Buffer size time cost (seconds) time cost (seconds) Accel.
100 KB 0.000845 0.000534 59.1%
1 MB 0.007758 0.004836 59.4%
10 MB 0.076593 0.047682 59.4%
100 MB 0.756734 0.479126 58.5%
1000 MB 7.563841 4.778266 58.5%
Signed-off-by: Min Zhou <zhoumin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
CRYPTO_TFM_REQ_MAY_BACKLOG tells the crypto driver that it should
internally backlog requests until the crypto hw's queue becomes
full. At that point, crypto_engine backlogs the request and returns
-EBUSY. Calling driver such as dm-crypt then waits until the
complete() function is called with a status of -EINPROGRESS before
sending a new request.
The problem lies in the call to complete() with a value of -EINPROGRESS
that is made when a backlog item is present on the queue. The call is
done before the successful execution of the crypto request. In the case
that do_one_request() returns < 0 and the retry support is available,
the request is put back in the queue. This leads upper drivers to send
a new request even if the queue is still full.
The problem can be reproduced by doing a large dd into a crypto
dm-crypt device. This is pretty easy to see when using
Freescale CAAM crypto driver and SWIOTLB dma. Since the actual amount
of requests that can be hold in the queue is unlimited we get IOs error
and dma allocation.
The fix is to call complete with a value of -EINPROGRESS only if
the request is not enqueued back in crypto_queue. This is done
by calling complete() later in the code. In order to delay the decision,
crypto_queue is modified to correctly set the backlog pointer
when a request is enqueued back.
Fixes: 6a89f492f8 ("crypto: engine - support for parallel requests based on retry mechanism")
Co-developed-by: Sylvain Ouellet <souellet@genetec.com>
Signed-off-by: Sylvain Ouellet <souellet@genetec.com>
Signed-off-by: Olivier Bacon <obacon@genetec.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The summary of the changes for this pull requests is:
* Song Liu's new struct module_memory replacement
* Nick Alcock's MODULE_LICENSE() removal for non-modules
* My cleanups and enhancements to reduce the areas where we vmalloc
module memory for duplicates, and the respective debug code which
proves the remaining vmalloc pressure comes from userspace.
Most of the changes have been in linux-next for quite some time except
the minor fixes I made to check if a module was already loaded
prior to allocating the final module memory with vmalloc and the
respective debug code it introduces to help clarify the issue. Although
the functional change is small it is rather safe as it can only *help*
reduce vmalloc space for duplicates and is confirmed to fix a bootup
issue with over 400 CPUs with KASAN enabled. I don't expect stable
kernels to pick up that fix as the cleanups would have also had to have
been picked up. Folks on larger CPU systems with modules will want to
just upgrade if vmalloc space has been an issue on bootup.
Given the size of this request, here's some more elaborate details
on this pull request.
The functional change change in this pull request is the very first
patch from Song Liu which replaces the struct module_layout with a new
struct module memory. The old data structure tried to put together all
types of supported module memory types in one data structure, the new
one abstracts the differences in memory types in a module to allow each
one to provide their own set of details. This paves the way in the
future so we can deal with them in a cleaner way. If you look at changes
they also provide a nice cleanup of how we handle these different memory
areas in a module. This change has been in linux-next since before the
merge window opened for v6.3 so to provide more than a full kernel cycle
of testing. It's a good thing as quite a bit of fixes have been found
for it.
Jason Baron then made dynamic debug a first class citizen module user by
using module notifier callbacks to allocate / remove module specific
dynamic debug information.
Nick Alcock has done quite a bit of work cross-tree to remove module
license tags from things which cannot possibly be module at my request
so to:
a) help him with his longer term tooling goals which require a
deterministic evaluation if a piece a symbol code could ever be
part of a module or not. But quite recently it is has been made
clear that tooling is not the only one that would benefit.
Disambiguating symbols also helps efforts such as live patching,
kprobes and BPF, but for other reasons and R&D on this area
is active with no clear solution in sight.
b) help us inch closer to the now generally accepted long term goal
of automating all the MODULE_LICENSE() tags from SPDX license tags
In so far as a) is concerned, although module license tags are a no-op
for non-modules, tools which would want create a mapping of possible
modules can only rely on the module license tag after the commit
8b41fc4454 ("kbuild: create modules.builtin without Makefile.modbuiltin
or tristate.conf"). Nick has been working on this *for years* and
AFAICT I was the only one to suggest two alternatives to this approach
for tooling. The complexity in one of my suggested approaches lies in
that we'd need a possible-obj-m and a could-be-module which would check
if the object being built is part of any kconfig build which could ever
lead to it being part of a module, and if so define a new define
-DPOSSIBLE_MODULE [0]. A more obvious yet theoretical approach I've
suggested would be to have a tristate in kconfig imply the same new
-DPOSSIBLE_MODULE as well but that means getting kconfig symbol names
mapping to modules always, and I don't think that's the case today. I am
not aware of Nick or anyone exploring either of these options. Quite
recently Josh Poimboeuf has pointed out that live patching, kprobes and
BPF would benefit from resolving some part of the disambiguation as
well but for other reasons. The function granularity KASLR (fgkaslr)
patches were mentioned but Joe Lawrence has clarified this effort has
been dropped with no clear solution in sight [1].
In the meantime removing module license tags from code which could never
be modules is welcomed for both objectives mentioned above. Some
developers have also welcomed these changes as it has helped clarify
when a module was never possible and they forgot to clean this up,
and so you'll see quite a bit of Nick's patches in other pull
requests for this merge window. I just picked up the stragglers after
rc3. LWN has good coverage on the motivation behind this work [2] and
the typical cross-tree issues he ran into along the way. The only
concrete blocker issue he ran into was that we should not remove the
MODULE_LICENSE() tags from files which have no SPDX tags yet, even if
they can never be modules. Nick ended up giving up on his efforts due
to having to do this vetting and backlash he ran into from folks who
really did *not understand* the core of the issue nor were providing
any alternative / guidance. I've gone through his changes and dropped
the patches which dropped the module license tags where an SPDX
license tag was missing, it only consisted of 11 drivers. To see
if a pull request deals with a file which lacks SPDX tags you
can just use:
./scripts/spdxcheck.py -f \
$(git diff --name-only commid-id | xargs echo)
You'll see a core module file in this pull request for the above,
but that's not related to his changes. WE just need to add the SPDX
license tag for the kernel/module/kmod.c file in the future but
it demonstrates the effectiveness of the script.
Most of Nick's changes were spread out through different trees,
and I just picked up the slack after rc3 for the last kernel was out.
Those changes have been in linux-next for over two weeks.
The cleanups, debug code I added and final fix I added for modules
were motivated by David Hildenbrand's report of boot failing on
a systems with over 400 CPUs when KASAN was enabled due to running
out of virtual memory space. Although the functional change only
consists of 3 lines in the patch "module: avoid allocation if module is
already present and ready", proving that this was the best we can
do on the modules side took quite a bit of effort and new debug code.
The initial cleanups I did on the modules side of things has been
in linux-next since around rc3 of the last kernel, the actual final
fix for and debug code however have only been in linux-next for about a
week or so but I think it is worth getting that code in for this merge
window as it does help fix / prove / evaluate the issues reported
with larger number of CPUs. Userspace is not yet fixed as it is taking
a bit of time for folks to understand the crux of the issue and find a
proper resolution. Worst come to worst, I have a kludge-of-concept [3]
of how to make kernel_read*() calls for modules unique / converge them,
but I'm currently inclined to just see if userspace can fix this
instead.
[0] https://lore.kernel.org/all/Y/kXDqW+7d71C4wz@bombadil.infradead.org/
[1] https://lkml.kernel.org/r/025f2151-ce7c-5630-9b90-98742c97ac65@redhat.com
[2] https://lwn.net/Articles/927569/
[3] https://lkml.kernel.org/r/20230414052840.1994456-3-mcgrof@kernel.org
-----BEGIN PGP SIGNATURE-----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=56WK
-----END PGP SIGNATURE-----
Merge tag 'modules-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull module updates from Luis Chamberlain:
"The summary of the changes for this pull requests is:
- Song Liu's new struct module_memory replacement
- Nick Alcock's MODULE_LICENSE() removal for non-modules
- My cleanups and enhancements to reduce the areas where we vmalloc
module memory for duplicates, and the respective debug code which
proves the remaining vmalloc pressure comes from userspace.
Most of the changes have been in linux-next for quite some time except
the minor fixes I made to check if a module was already loaded prior
to allocating the final module memory with vmalloc and the respective
debug code it introduces to help clarify the issue. Although the
functional change is small it is rather safe as it can only *help*
reduce vmalloc space for duplicates and is confirmed to fix a bootup
issue with over 400 CPUs with KASAN enabled. I don't expect stable
kernels to pick up that fix as the cleanups would have also had to
have been picked up. Folks on larger CPU systems with modules will
want to just upgrade if vmalloc space has been an issue on bootup.
Given the size of this request, here's some more elaborate details:
The functional change change in this pull request is the very first
patch from Song Liu which replaces the 'struct module_layout' with a
new 'struct module_memory'. The old data structure tried to put
together all types of supported module memory types in one data
structure, the new one abstracts the differences in memory types in a
module to allow each one to provide their own set of details. This
paves the way in the future so we can deal with them in a cleaner way.
If you look at changes they also provide a nice cleanup of how we
handle these different memory areas in a module. This change has been
in linux-next since before the merge window opened for v6.3 so to
provide more than a full kernel cycle of testing. It's a good thing as
quite a bit of fixes have been found for it.
Jason Baron then made dynamic debug a first class citizen module user
by using module notifier callbacks to allocate / remove module
specific dynamic debug information.
Nick Alcock has done quite a bit of work cross-tree to remove module
license tags from things which cannot possibly be module at my request
so to:
a) help him with his longer term tooling goals which require a
deterministic evaluation if a piece a symbol code could ever be
part of a module or not. But quite recently it is has been made
clear that tooling is not the only one that would benefit.
Disambiguating symbols also helps efforts such as live patching,
kprobes and BPF, but for other reasons and R&D on this area is
active with no clear solution in sight.
b) help us inch closer to the now generally accepted long term goal
of automating all the MODULE_LICENSE() tags from SPDX license tags
In so far as a) is concerned, although module license tags are a no-op
for non-modules, tools which would want create a mapping of possible
modules can only rely on the module license tag after the commit
8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf").
Nick has been working on this *for years* and AFAICT I was the only
one to suggest two alternatives to this approach for tooling. The
complexity in one of my suggested approaches lies in that we'd need a
possible-obj-m and a could-be-module which would check if the object
being built is part of any kconfig build which could ever lead to it
being part of a module, and if so define a new define
-DPOSSIBLE_MODULE [0].
A more obvious yet theoretical approach I've suggested would be to
have a tristate in kconfig imply the same new -DPOSSIBLE_MODULE as
well but that means getting kconfig symbol names mapping to modules
always, and I don't think that's the case today. I am not aware of
Nick or anyone exploring either of these options. Quite recently Josh
Poimboeuf has pointed out that live patching, kprobes and BPF would
benefit from resolving some part of the disambiguation as well but for
other reasons. The function granularity KASLR (fgkaslr) patches were
mentioned but Joe Lawrence has clarified this effort has been dropped
with no clear solution in sight [1].
In the meantime removing module license tags from code which could
never be modules is welcomed for both objectives mentioned above. Some
developers have also welcomed these changes as it has helped clarify
when a module was never possible and they forgot to clean this up, and
so you'll see quite a bit of Nick's patches in other pull requests for
this merge window. I just picked up the stragglers after rc3. LWN has
good coverage on the motivation behind this work [2] and the typical
cross-tree issues he ran into along the way. The only concrete blocker
issue he ran into was that we should not remove the MODULE_LICENSE()
tags from files which have no SPDX tags yet, even if they can never be
modules. Nick ended up giving up on his efforts due to having to do
this vetting and backlash he ran into from folks who really did *not
understand* the core of the issue nor were providing any alternative /
guidance. I've gone through his changes and dropped the patches which
dropped the module license tags where an SPDX license tag was missing,
it only consisted of 11 drivers. To see if a pull request deals with a
file which lacks SPDX tags you can just use:
./scripts/spdxcheck.py -f \
$(git diff --name-only commid-id | xargs echo)
You'll see a core module file in this pull request for the above, but
that's not related to his changes. WE just need to add the SPDX
license tag for the kernel/module/kmod.c file in the future but it
demonstrates the effectiveness of the script.
Most of Nick's changes were spread out through different trees, and I
just picked up the slack after rc3 for the last kernel was out. Those
changes have been in linux-next for over two weeks.
The cleanups, debug code I added and final fix I added for modules
were motivated by David Hildenbrand's report of boot failing on a
systems with over 400 CPUs when KASAN was enabled due to running out
of virtual memory space. Although the functional change only consists
of 3 lines in the patch "module: avoid allocation if module is already
present and ready", proving that this was the best we can do on the
modules side took quite a bit of effort and new debug code.
The initial cleanups I did on the modules side of things has been in
linux-next since around rc3 of the last kernel, the actual final fix
for and debug code however have only been in linux-next for about a
week or so but I think it is worth getting that code in for this merge
window as it does help fix / prove / evaluate the issues reported with
larger number of CPUs. Userspace is not yet fixed as it is taking a
bit of time for folks to understand the crux of the issue and find a
proper resolution. Worst come to worst, I have a kludge-of-concept [3]
of how to make kernel_read*() calls for modules unique / converge
them, but I'm currently inclined to just see if userspace can fix this
instead"
Link: https://lore.kernel.org/all/Y/kXDqW+7d71C4wz@bombadil.infradead.org/ [0]
Link: https://lkml.kernel.org/r/025f2151-ce7c-5630-9b90-98742c97ac65@redhat.com [1]
Link: https://lwn.net/Articles/927569/ [2]
Link: https://lkml.kernel.org/r/20230414052840.1994456-3-mcgrof@kernel.org [3]
* tag 'modules-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (121 commits)
module: add debugging auto-load duplicate module support
module: stats: fix invalid_mod_bytes typo
module: remove use of uninitialized variable len
module: fix building stats for 32-bit targets
module: stats: include uapi/linux/module.h
module: avoid allocation if module is already present and ready
module: add debug stats to help identify memory pressure
module: extract patient module check into helper
modules/kmod: replace implementation with a semaphore
Change DEFINE_SEMAPHORE() to take a number argument
module: fix kmemleak annotations for non init ELF sections
module: Ignore L0 and rename is_arm_mapping_symbol()
module: Move is_arm_mapping_symbol() to module_symbol.h
module: Sync code of is_arm_mapping_symbol()
scripts/gdb: use mem instead of core_layout to get the module address
interconnect: remove module-related code
interconnect: remove MODULE_LICENSE in non-modules
zswap: remove MODULE_LICENSE in non-modules
zpool: remove MODULE_LICENSE in non-modules
x86/mm/dump_pagetables: remove MODULE_LICENSE in non-modules
...
API:
- Total usage stats now include all that returned error (instead of some).
- Remove maximum hash statesize limit.
- Add cloning support for hmac and unkeyed hashes.
- Demote BUG_ON in crypto_unregister_alg to a WARN_ON.
Algorithms:
- Use RIP-relative addressing on x86 to prepare for PIE build.
- Add accelerated AES/GCM stitched implementation on powerpc P10.
- Add some test vectors for cmac(camellia).
- Remove failure case where jent is unavailable outside of FIPS mode in drbg.
- Add permanent and intermittent health error checks in jitter RNG.
Drivers:
- Add support for 402xx devices in qat.
- Add support for HiSTB TRNG.
- Fix hash concurrency issues in stm32.
- Add OP-TEE firmware support in caam.
-----BEGIN PGP SIGNATURE-----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=ITkW
-----END PGP SIGNATURE-----
Merge tag 'v6.4-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Total usage stats now include all that returned errors (instead of
just some)
- Remove maximum hash statesize limit
- Add cloning support for hmac and unkeyed hashes
- Demote BUG_ON in crypto_unregister_alg to a WARN_ON
Algorithms:
- Use RIP-relative addressing on x86 to prepare for PIE build
- Add accelerated AES/GCM stitched implementation on powerpc P10
- Add some test vectors for cmac(camellia)
- Remove failure case where jent is unavailable outside of FIPS mode
in drbg
- Add permanent and intermittent health error checks in jitter RNG
Drivers:
- Add support for 402xx devices in qat
- Add support for HiSTB TRNG
- Fix hash concurrency issues in stm32
- Add OP-TEE firmware support in caam"
* tag 'v6.4-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (139 commits)
i2c: designware: Add doorbell support for Mendocino
i2c: designware: Use PCI PSP driver for communication
powerpc: Move Power10 feature PPC_MODULE_FEATURE_P10
crypto: p10-aes-gcm - Remove POWER10_CPU dependency
crypto: testmgr - Add some test vectors for cmac(camellia)
crypto: cryptd - Add support for cloning hashes
crypto: cryptd - Convert hash to use modern init_tfm/exit_tfm
crypto: hmac - Add support for cloning
crypto: hash - Add crypto_clone_ahash/shash
crypto: api - Add crypto_clone_tfm
crypto: api - Add crypto_tfm_get
crypto: x86/sha - Use local .L symbols for code
crypto: x86/crc32 - Use local .L symbols for code
crypto: x86/aesni - Use local .L symbols for code
crypto: x86/sha256 - Use RIP-relative addressing
crypto: x86/ghash - Use RIP-relative addressing
crypto: x86/des3 - Use RIP-relative addressing
crypto: x86/crc32c - Use RIP-relative addressing
crypto: x86/cast6 - Use RIP-relative addressing
crypto: x86/cast5 - Use RIP-relative addressing
...
Add machine keyring CA restriction options to control the type of
keys that may be added to it. The motivation is separation of
certificate signing from code signing keys. Subsquent work will
limit certificates being loaded into the IMA keyring to code
signing keys used for signature verification.
When no restrictions are selected, all Machine Owner Keys (MOK) are added
to the machine keyring. When CONFIG_INTEGRITY_CA_MACHINE_KEYRING is
selected, the CA bit must be true. Also the key usage must contain
keyCertSign, any other usage field may be set as well.
When CONFIG_INTEGRITY_CA_MACHINE_KEYRING_MAX is selected, the CA bit must
be true. Also the key usage must contain keyCertSign and the
digitialSignature usage may not be set.
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Add a new link restriction. Restrict the addition of keys in a keyring
based on the key to be added being a CA.
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Parse the X.509 Key Usage. The key usage extension defines the purpose of
the key contained in the certificate.
id-ce-keyUsage OBJECT IDENTIFIER ::= { id-ce 15 }
KeyUsage ::= BIT STRING {
digitalSignature (0),
contentCommitment (1),
keyEncipherment (2),
dataEncipherment (3),
keyAgreement (4),
keyCertSign (5),
cRLSign (6),
encipherOnly (7),
decipherOnly (8) }
If the keyCertSign or digitalSignature is set, store it in the
public_key structure. Having the purpose of the key being stored
during parsing, allows enforcement on the usage field in the future.
This will be used in a follow on patch that requires knowing the
certificate key usage type.
Link: https://www.rfc-editor.org/rfc/rfc5280#section-4.2.1.3
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Parse the X.509 Basic Constraints. The basic constraints extension
identifies whether the subject of the certificate is a CA.
BasicConstraints ::= SEQUENCE {
cA BOOLEAN DEFAULT FALSE,
pathLenConstraint INTEGER (0..MAX) OPTIONAL }
If the CA is true, store it in the public_key. This will be used
in a follow on patch that requires knowing if the public key is a CA.
Link: https://www.rfc-editor.org/rfc/rfc5280#section-4.2.1.9
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Add some test vectors for 128-bit cmac(camellia) as found in
draft-kato-ipsec-camellia-cmac96and128-01 section 6.2.
The document also shows vectors for camellia-cmac-96, and for VK with a
length greater than 16, but I'm not sure how to express those in testmgr.
This also leaves cts(cbc(camellia)) untested, but I can't seem to find any
tests for that that I could put into testmgr.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: Chuck Lever <chuck.lever@oracle.com>
cc: Scott Mayhew <smayhew@redhat.com>
cc: linux-nfs@vger.kernel.org
cc: linux-crypto@vger.kernel.org
Link: https://datatracker.ietf.org/doc/pdf/draft-kato-ipsec-camellia-cmac96and128-01
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
