The recent fix c4824ae7db ("ALSA: pcm: Fix mmap capability check")
restricts the mmap capability only to the drivers that properly set up
the buffers, but it caused a regression for a few drivers that manage
the buffer on its own way.
For those with UNKNOWN buffer type (i.e. the uninitialized / unused
substream->dma_buffer), just assume that the driver handles the mmap
properly and blindly trust the hardware info bit.
Fixes: c4824ae7db ("ALSA: pcm: Fix mmap capability check")
Reported-and-tested-by: Jeff Woods <jwoods@fnordco.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/s5him0gpghv.wl-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It turned out that the current implementation of the port subscription
is racy. The subscription contains two linked lists, and we have to
add to or delete from both lists. Since both connection and
disconnection procedures perform the same order for those two lists
(i.e. src list, then dest list), when a deletion happens during a
connection procedure, the src list may be deleted before the dest list
addition completes, and this may lead to a use-after-free or an Oops,
even though the access to both lists are protected via mutex.
The simple workaround for this race is to change the access order for
the disconnection, namely, dest list, then src list. This assures
that the connection has been established when disconnecting, and also
the concurrent deletion can be avoided.
Reported-and-tested-by: folkert <folkert@vanheusden.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210801182754.GP890690@belle.intranet.vanheusden.com
Link: https://lore.kernel.org/r/20210803114312.2536-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent code refactoring made the mmap of continuous pages to be
done via the own helper snd_dma_continuous_mmap() with
remap_pfn_range(). There I overlooked that dmab->addr isn't set for
the allocation with SNDRV_DMA_TYPE_CONTINUOUS. This resulted always
in an error at mmap with this buffer type on the system such as
Intel SST Baytrail driver.
This patch fixes the regression by passing the correct address.
Fixes: 30b7ba6972 ("ALSA: core: Add continuous and vmalloc mmap ops")
Reported-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/8d6674da-7d7b-803e-acc9-7de6cb1223fa@redhat.com
Link: https://lore.kernel.org/r/20210801113801.31290-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent rewrite of the memory allocation helpers also changed the
page extraction to a common helper, snd_sgbuf_get_page(). But this
assumes implicitly that the buffer was allocated via the standard
helper (usually via preallocation), and didn't consider the case of
the manual buffer handling.
This patch fixes it and also covers the manual buffer management.
Fixes: 37af81c599 ("ALSA: core: Abstract memory alloc helpers")
Link: https://lore.kernel.org/r/20210720092732.12412-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The hw_support_mmap() doesn't cover all memory allocation types and
might use a wrong device pointer for checking the capability.
Check the all memory allocation types more completely.
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210720092640.12338-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If a 32-bit application is being used with a 64-bit kernel and is using
the mmap mechanism to write data, then the SNDRV_PCM_IOCTL_SYNC_PTR
ioctl results in calling snd_pcm_ioctl_sync_ptr_compat(). Make this use
pcm_lib_apply_appl_ptr() so that the substream's ack() method, if
defined, is called.
The snd_pcm_sync_ptr() function, used in the 64-bit ioctl case, already
uses snd_pcm_ioctl_sync_ptr_compat().
Fixes: 9027c4639e ("ALSA: pcm: Call ack() whenever appl_ptr is updated")
Signed-off-by: Alan Young <consult.awy@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/c441f18c-eb2a-3bdd-299a-696ccca2de9c@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This release sees a nice new feature in the core from Morimoto-san,
support for automatic negotiation of DAI formats between the components
on the link. Otherwise the big highlight was the merging of the Tegra
machine drivers into a single driver avoiding a bunch of duplication.
- Support for automatic negotiation of DAI formats.
- Accessory detection support for several Qualcomm parts.
- Support for IEC958 control with hdmi-codec.
- Merging of Tegra machine drivers into a single driver.
- Support for AmLogic SM1 TOACODEC, Intel AlderLake-M, several NXP
i.MX8 variants, NXP TFA1 and TDF9897, Rockchip RK817, Qualcomm
Quinary MI2S, Texas Instruments TAS2505
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmDZzCgACgkQJNaLcl1U
h9DmKAf+IhmeYLxMuSe7uC/BZHQN1PFFHDb9rNyznqYD0kCzgfqvt7RIbbpOB83g
Rw6+SnKWq1k2LOtJc7nVfFXfCrWTCH/GkqH22YoDWUjc2ZLTLE4V/dZhrYzggkjz
qE4bOUNBHUyqO0Xir1iMFCdr9V4+Fc5iYT83FccHB+hF+o8GNcU0MkovUKgiTeuz
EChmQlfsOHxKU6DbRUQrO30plSTaCQZ9CHAOXlGRQnGaYH/99ecav2O7sM1F4SrI
uHR544UuJUiZ26PcZ5M66GvuwAOoSw/v6Tr/OykBulgFUX8wafDcHq7vGK5A6WCE
qGwWpe12E+veMsJjn7wzifryaxJ9zQ==
=F1Zu
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v5.14
This release sees a nice new feature in the core from Morimoto-san,
support for automatic negotiation of DAI formats between the components
on the link. Otherwise the big highlight was the merging of the Tegra
machine drivers into a single driver avoiding a bunch of duplication.
- Support for automatic negotiation of DAI formats.
- Accessory detection support for several Qualcomm parts.
- Support for IEC958 control with hdmi-codec.
- Merging of Tegra machine drivers into a single driver.
- Support for AmLogic SM1 TOACODEC, Intel AlderLake-M, several NXP
i.MX8 variants, NXP TFA1 and TDF9897, Rockchip RK817, Qualcomm
Quinary MI2S, Texas Instruments TAS2505
Hi,
this is v2 from my patchset that add support for the TAS2505 to the tlv320aic32x4 driver.
kind regards,
Claudius
Changes from v1:
- clarified commit message of first patch, which add the type value to the struct
- removed unnecessary code to put and get speaker volume
- removed 'Gain' from 'HP Driver Playback Volume' control
- fixed rebase issues
Claudius Heine (3):
ASoC: tlv320aic32x4: add type to device private data struct
ASoC: tlv320aic32x4: add support for TAS2505
ASoC: tlv320aic32x4: dt-bindings: add TAS2505 to compatible
.../bindings/sound/tlv320aic32x4.txt | 1 +
sound/soc/codecs/tlv320aic32x4-i2c.c | 22 ++-
sound/soc/codecs/tlv320aic32x4-spi.c | 23 ++-
sound/soc/codecs/tlv320aic32x4.c | 139 +++++++++++++++++-
sound/soc/codecs/tlv320aic32x4.h | 10 ++
5 files changed, 186 insertions(+), 9 deletions(-)
base-commit: 70585216fe
--
2.32.0
The system port creation in ALSA OSS sequencer was wrongly checked
against to the port number that can be never negative. The error code
should be checked rather against the ioctl call.
This patch corrects the error check.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20210617134742.6321-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The str variable should be always initialized before use even if
the switch covers all cases. This is a minimalistic fix: Assign NULL,
the sprintf() may print '(null)' if something is corrupted.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210614071710.1786866-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The timer instance per queue is exclusive, and snd_seq_timer_open()
should have managed the concurrent accesses. It looks as if it's
checking the already existing timer instance at the beginning, but
it's not right, because there is no protection, hence any later
concurrent call of snd_seq_timer_open() may override the timer
instance easily. This may result in UAF, as the leftover timer
instance can keep running while the queue itself gets closed, as
spotted by syzkaller recently.
For avoiding the race, add a proper check at the assignment of
tmr->timeri again, and return -EBUSY if it's been already registered.
Reported-by: syzbot+ddc1260a83ed1cbf6fb5@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/000000000000dce34f05c42f110c@google.com
Link: https://lore.kernel.org/r/20210610152059.24633-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The mmap of continuous pages and vmalloc'ed pages are relatively
easily done in a shot with the existing helper functions.
Implement the mmap ops for those types, so that the mmap works without
relying on the page fault handling.
Link: https://lore.kernel.org/r/20210609162551.7842-6-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch moves the mmap handling code into the common memalloc
handler. It allows us to reduce the memory-type specific code in PCM
code gracefully.
Link: https://lore.kernel.org/r/20210609162551.7842-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch introduces the ops table to each memory allocation type
(SNDRV_DMA_TYPE_XXX) and abstract the handling for the better code
management. Then we get separate the page allocation, release and
other tasks for each type, especially for the SG buffer.
Each buffer type has now callbacks in the struct snd_malloc_ops, and
the common helper functions call those ops accordingly. The former
inline code that is specific to SG-buffer is moved into the local
sgbuf.c, and we can simplify the PCM code without details of memory
handling.
Link: https://lore.kernel.org/r/20210609162551.7842-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Current implementation of ALSA PCM core has a kernel API,
snd_pcm_period_elapsed(), for drivers to queue event to awaken processes
from waiting for available frames. The function voluntarily acquires lock
of PCM substream, therefore it is not called in process context for any
PCM operation since the lock is already acquired.
It is convenient for packet-oriented driver, at least for drivers to audio
and music unit in IEEE 1394 bus. The drivers are allowed by Linux
FireWire subsystem to process isochronous packets queued till recent
isochronous cycle in process context in any time.
This commit adds snd_pcm_period_elapsed() variant,
snd_pcm_period_elapsed_without_lock(), for drivers to queue the event in
the process context.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210610031733.56297-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There are lots of places doing assignments in if condition in ALSA
sequencer core, which is a bad coding style that may confuse readers
and occasionally lead to bugs.
This patch is merely for coding-style fixes, no functional changes.
Link: https://lore.kernel.org/r/20210608140540.17885-57-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There are a few places doing assignments in if condition in ALSA PCM
and OSS emulation layers, which is a bad coding style that may confuse
readers and occasionally lead to bugs.
This patch is merely for coding-style fixes, no functional changes.
Link: https://lore.kernel.org/r/20210608140540.17885-56-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There are a few places doing assignments in if condition in ALSA PCM
core code, which is a bad coding style that may confuse readers and
occasionally lead to bugs.
This patch is merely for coding-style fixes, no functional changes.
Link: https://lore.kernel.org/r/20210608140540.17885-55-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There are a few places doing assignments in if condition in ALSA core
code, which is a bad coding style that may confuse readers and
occasionally lead to bugs.
This patch is merely for coding-style fixes, no functional changes.
Link: https://lore.kernel.org/r/20210608140540.17885-54-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In some situations, like a codec probe, we need to provide an IEC status
default but don't have access to the sampling rate and width yet since
no stream has been configured yet.
Each and every driver has its own default, whereas the core iec958 code
also has some buried in the snd_pcm_create_iec958_consumer functions.
Let's split these functions in two to provide a default that doesn't
rely on the sampling rate and width, and another function to fill them
when available.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20210525132354.297468-3-maxime@cerno.tech
The snd_ctl_led_sysfs_add and snd_ctl_led_sysfs_remove should contain
the refcount operations in pair. However, snd_ctl_led_sysfs_remove fails
to decrease the refcount to zero, which causes device_release never to
be invoked. This leads to memory leak to some resources, like struct
device_private. In addition, we also free some other similar memory
leaks in snd_ctl_led_init/snd_ctl_led_exit.
Fix this by replacing device_del to device_unregister
in snd_ctl_led_sysfs_remove/snd_ctl_led_init/snd_ctl_led_exit.
Note that, when CONFIG_DEBUG_KOBJECT_RELEASE is enabled, put_device will
call kobject_release and delay the release of kobject, which will cause
use-after-free when the memory backing the kobject is freed at once.
Reported-by: syzbot+08a7d8b51ea048a74ffb@syzkaller.appspotmail.com
Fixes: a135dfb5de ("ALSA: led control - add sysfs kcontrol LED marking layer")
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210602034136.2762497-1-mudongliangabcd@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use DEVICE_ATTR_*() helper instead of plain DEVICE_ATTR,
which makes the code a bit shorter and easier to read.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20210526121828.8460-1-yuehaibing@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use DEVICE_ATTR_*() helper instead of plain DEVICE_ATTR,
which makes the code a bit shorter and easier to read.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210523071109.28940-1-yuehaibing@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use DEVICE_ATTR_RO() helper instead of plain DEVICE_ATTR(),
which makes the code a bit shorter and easier to read.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20210524120007.39728-1-yuehaibing@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The normal PCM operations are already blocked during the card power
off state in the PCM common ioctl handler, but the release isn't
covered. As the PCM stream release may also access the hardware,
let's block the release until the card power turns on.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210523090920.15345-7-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The power_state argument of snd_power_wait() is superfluous, receiving
only SNDRV_POWER_STATE_D0. Let's drop it in all callers for
simplicity.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210523090920.15345-6-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Long long time ago, before the proper PM framework was introduced, it
was still possible to reach SNDRV_CTL_IOCTL_POWER ioctl during the
power off state. This ioctl existed as a main control for the suspend
resume state in the past, but the feature was already dropped along
with the standard PM framework. Now the read part,
SNDRV_IOCTL_POWER_STATE ioctl, returns practically always D0, and we
can do some minor optimization there.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210523090920.15345-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now we have more fine-grained power controls in each kcontrol ops, the
coarse checks of snd_power_wait() in a few control ioctls became
superfluous. Let's drop them.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210523090920.15345-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Although the power state check is performed in various places (e.g. at
the entrance of quite a few ioctls), there can be still some pending
tasks that already went into the ioctl handler or other ops, and those
may access the hardware even after the power state check. For
example, kcontrol access ioctl paths that call info/get/put callbacks
may update the hardware registers. If a system wants to assure the
free from such hw access (like the case of PCI rescan feature we're
going to implement in future), this situation must be avoided, and we
have to sync such in-flight tasks finishing beforehand.
For that purpose, this patch introduces a few new things in core code:
- A refcount, power_ref, and a wait queue, power_ref_sleep, to the
card object
- A few new helpers, snd_power_ref(), snd_power_unref(),
snd_power_ref_and_wait(), and snd_power_sync_ref()
In the code paths that call kctl info/read/write/tlv ops, we check the
power state with the newly introduced snd_power_ref_and_wait(). This
function also takes the card.power_ref refcount for tracking this
in-flight task. Once after the access finishes, snd_power_unref() is
called to released the refcount in return. So the driver can sync via
snd_power_sync_ref() assuring that all in-flight tasks have been
finished.
As of this patch, snd_power_sync_ref() is called only at
snd_card_disconnect(), but it'll be used in other places in future.
Note that atomic_t is used for power_ref intentionally instead of
refcount_t. It's because of the design of refcount_t type; refcount_t
cannot be zero-based, and it cannot do dec_and_test() call for
multiple times, hence it's not suitable for our purpose.
Also, this patch changes snd_power_wait() to accept only
SNDRV_CTL_POWER_D0, which is the only value that makes sense.
In later patch, the snd_power_wait() calls will be cleaned up.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210523090920.15345-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The array bounds check on clock_names is currently checking the size
of the entire array rather than the number of elements in the array
leading to a potential array bounds read error. Fix this by using
the ARRAY_SIZE macro instead of sizeof.
Addresses-Coverity: ("Out-of-bounds read")
Fixes: 08fdced60c ("ALSA: rawmidi: Add framing mode")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210519105424.55221-1-colin.king@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit adds a new framing mode that frames all MIDI data into
32-byte frames with a timestamp.
The main benefit is that we can get accurate timestamps even if
userspace wakeup and processing is not immediate.
Testing on a Celeron N3150 with this mode has a max jitter of 2.8 ms,
compared to the in-kernel seq implementation which has a max jitter
of 5 ms during idle and much worse when running scheduler stress tests
in parallel.
Signed-off-by: David Henningsson <coding@diwic.se>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210515071533.55332-1-coding@diwic.se
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We've got a report about the possible race in the user control element
counts (card->user_ctl_count), and it was confirmed that the race
wasn't serious in the old code up to 5.12. There, the value
modification itself was exclusive and protected via a write semaphore,
hence it's at most concurrent reads and evaluations before the
increment. Since it's only about the soft-limit to avoid the
exhausting memory usage, one-off isn't a big problem at all.
Meanwhile, the relevant code has been largely modified recently, and
now card->user_ctl_count was replaced with card->user_ctl_alloc_size,
and a few more places were added to access this field. And, in this
new code, it turned out to be more serious: the modifications are
scattered in various places, and a few of them are without protection.
It implies that it may lead to an inconsistent value by racy
accesses.
For addressing it, this patch extends the range covered by the
card->controls_rwsem write lock at snd_ctl_elem_add() so that the all
code paths that modify and refer to card->user_ctl_alloc_size are
protected by the rwsem properly.
The patch adds also comments in a couple of functions to indicate that
they are under the rwsem lock.
Fixes: 66c6d1ef86 ("ALSA: control: Add memory consumption limit to user controls")
Link: https://lore.kernel.org/r/FEEBF384-44BE-42CF-8FB3-93470933F64F@purdue.edu
Link: https://lore.kernel.org/r/20210415131856.13113-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It's a bad idea to allocate big structures on the stack.
Mark the variables as static and add a note for the locking.
Fixes: 22d8de62f1 ("ALSA: control - add generic LED trigger module as the new control layer")
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210414105858.1937710-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
"group - 1" was intended here instead of "group". The current error
handling will double free the first item in the array and leak the last
item.
Fixes: cb17fe0045 ("ALSA: control - add sysfs support to the LED trigger module")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/YHBJ4frGxErWB182@mwanda
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALSA control interface allows users to add arbitrary control elements
(called "user controls" or "user elements"), and its resource usage is
limited just by the max number of control sets (currently 32). This
limit, however, is quite loose: each allocation of control set may
have 1028 elements, and each element may have up to 512 bytes (ILP32) or
1024 bytes (LP64) of value data. Moreover, each control set may contain
the enum strings and TLV data, which can be up to 64kB and 128kB,
respectively. Totally, the whole memory consumption may go over 38MB --
it's quite large, and we'd rather like to reduce the size.
OTOH, there have been other requests even to increase the max number
of user elements; e.g. ALSA firewire stack require the more user
controls, hence we want to raise the bar, too.
For satisfying both requirements, this patch changes the management of
user controls: instead of setting the upper limit of the number of
user controls, we check the actual memory allocation size and set the
upper limit of the total allocation in bytes. As long as the memory
consumption stays below the limit, more user controls are allowed than
the current limit 32. At the same time, we set the lower limit (8MB)
as default than the current theoretical limit, in order to lower the
risk of DoS.
As a compromise for lowering the default limit, now the actual memory
limit is defined as a module option, 'max_user_ctl_alloc_size', so that
user can increase/decrease the limit if really needed, too.
Link: https://lore.kernel.org/r/s5htur3zl5e.wl-tiwai@suse.de
Co-developed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Tested-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210408103149.40357-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If count is 16 then this will put the NUL terminator one element beyond
the end of the array.
Fixes: cb17fe0045 ("ALSA: control - add sysfs support to the LED trigger module")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/YGcDOtrimR46vr0k@mwanda
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It may be possible that the string pointer does not move
when parsing. Add a code which detects this state and
simply break the parser loop in this case.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210331180725.663623-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patchset tries to resolve the diversity in the audio LED
control among the ALSA drivers. A new control layer registration
is introduced which allows to run additional operations on
top of the elementary ALSA sound controls.
A new control access group (three bits in the access flags)
was introduced to carry the LED group information for
the sound controls. The low-level sound drivers can just
mark those controls using this access group. This information
is not exported to the user space, but user space can
manage the LED sound control associations through sysfs
(last patch) per Mark's request. It makes things fully
configurable in the kernel and user space (UCM).
The actual state ('route') evaluation is really easy
(the minimal value check for all channels / controls / cards).
If there's more complicated logic for a given hardware,
the card driver may eventually export a new read-only
sound control for the LED group and do the logic itself.
The new LED trigger control code is completely separated
and possibly optional (there's no symbol dependency).
The full code separation allows eventually to move this
LED trigger control to the user space in future.
Actually it replaces the already present functionality
in the kernel space (HDA drivers) and allows a quick adoption
for the recent hardware (ASoC codecs including SoundWire).
snd_ctl_led 24576 0
The sound driver implementation is really easy:
1) call snd_ctl_led_request() when control LED layer should be
automatically activated
/ it calls module_request("snd-ctl-led") on demand /
2) mark all related kcontrols with
SNDRV_CTL_ELEM_ACCESS_SPK_LED or
SNDRV_CTL_ELEM_ACCESS_MIC_LED
Link: https://lore.kernel.org/r/20210317172945.842280-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-----BEGIN PGP SIGNATURE-----
iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAmBjRuQOHHRpd2FpQHN1
c2UuZGUACgkQLtJE4w1nLE9ZQw/6Ao2X1io4TVnyO/gO8HtwmnZ6TWcrLUlySaep
H6Suf0RHsOQO9VOaMcUarA3Wnz1vZ44qJ/fkdLTslnIPGSRJDUx15bbb+n2N6pQJ
gS7Umxy6n73rQyEoDjd3ZorvDGjFSVFpjM+RYjk/Ohq+yziz7nQ/SZuHPPeqm1GU
C5d9SxyXGdqlJJ6yFCHzbtjSmIey+l1TZ+j3rSSww/CzDKxB2l5J6JZAMUjVdL9b
J80Mcw0XLdG9iTtEnkUt3TwvLMcMl95UPeQHIkVQlwsRRb3BtHNIwJLPQ/n+Cou7
Hre3y2miUYHrNICEzMdMlpDzQBqu5wvpXgbgIV0CwAwCXPZBVWE1hVJ9gG0l+r1G
fy1a75OmEin4V9g8w+wNTWDEgjwAOkWhA67WVjpbvHtd6kEbISzt4JHFksG1rjU2
vXOIj2VBmQN6zHtxfcZqY8Ge4A7XGo7tAM/3NsUxin+2y7ZXI6sDvv+0esYmqrYr
9as/tD84L5LTrbUYewaUgEdauQXluQI1egRi7pSeg7hZyLeYYkmszk54Ra3zdlmM
m7Hr6u+Y/G7yeFdn/WdeG3VzdmxhC2ZFfk3gq0vneBS3WrATbf6nAORp2bwzGSz4
pUsVLSv+vhpZdSF+IxpUuMnsLkkbUCvFivXLjQ6irSWvp7uts1HWdRowdg7Pe2lC
FVbFRuA=
=1uM7
-----END PGP SIGNATURE-----
Merge tag 'tags/mute-led-rework' into for-next
ALSA: control - add generic LED API
This patchset tries to resolve the diversity in the audio LED
control among the ALSA drivers. A new control layer registration
is introduced which allows to run additional operations on
top of the elementary ALSA sound controls.
A new control access group (three bits in the access flags)
was introduced to carry the LED group information for
the sound controls. The low-level sound drivers can just
mark those controls using this access group. This information
is not exported to the user space, but user space can
manage the LED sound control associations through sysfs
(last patch) per Mark's request. It makes things fully
configurable in the kernel and user space (UCM).
The actual state ('route') evaluation is really easy
(the minimal value check for all channels / controls / cards).
If there's more complicated logic for a given hardware,
the card driver may eventually export a new read-only
sound control for the LED group and do the logic itself.
The new LED trigger control code is completely separated
and possibly optional (there's no symbol dependency).
The full code separation allows eventually to move this
LED trigger control to the user space in future.
Actually it replaces the already present functionality
in the kernel space (HDA drivers) and allows a quick adoption
for the recent hardware (ASoC codecs including SoundWire).
snd_ctl_led 24576 0
The sound driver implementation is really easy:
1) call snd_ctl_led_request() when control LED layer should be
automatically activated
/ it calls module_request("snd-ctl-led") on demand /
2) mark all related kcontrols with
SNDRV_CTL_ELEM_ACCESS_SPK_LED or
SNDRV_CTL_ELEM_ACCESS_MIC_LED
Link: https://lore.kernel.org/r/20210317172945.842280-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We need to manage the kcontrol entries association for the LED trigger
from the user space. This patch adds a layer to the sysfs tree like:
/sys/devices/virtual/sound/ctl-led/mic
+ card0
| + attach
| + detach
| ...
+ card1
+ attach
...
Operations:
attach and detach
- amixer style ID is accepted and easy strings for numid and
simple names
reset
- reset all associated kcontrol entries
list
- list associated kcontrol entries (numid values only)
Additional symlinks:
/sys/devices/virtual/sound/ctl-led/mic/card0/card ->
/sys/class/sound/card0
/sys/class/sound/card0/controlC0/led-mic ->
/sys/devices/virtual/sound/ctl-led/mic/card0
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210317172945.842280-7-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Create SYSFS/devices/virtual/sound/ctl-led tree
(with SYSFS/class/sound/ctl-led symlink).
speaker/
+-- mode
+-- brightness
mic/
+-- mode
+-- brightness
Copy the idea from the HDA driver and allow to set the audio
LEDs based on the various modes:
- follow mute
- follow moute (inverted to follow mute)
- off
- on
Also, the actual LED state is exposed.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210317172945.842280-6-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent laptops have usually two LEDs assigned to reflect
the speaker and microphone mute state. This implementation
adds a tiny layer on top of the control API which calculates
the state for those LEDs using the driver callbacks.
Two new access flags are introduced to describe the controls
which affects the audio path settings (an easy code change
for drivers).
The LED resource can be shared with multiple sound cards with
this code. The user space controls may be added to the state
chain on demand, too.
This code should replace the LED code in the HDA driver and
add a possibility to easy extend the other drivers (ASoC
codecs etc.).
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210317172945.842280-4-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The layer registration allows to handle an extra functionality
on top of the control API. It can be used for the audio
LED control for example.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210317172945.842280-3-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This helper is required for the following generic LED mute
patch. The helper also simplifies some other functions.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210317172945.842280-2-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
