Dan's smatch tool reports
fs/btrfs/file-item.c:295 btrfs_lookup_bio_sums()
warn: should this be 'count == -1'
which points to the while (count--) loop. With count == 0 the check
itself could decrement it to -1. There's a WARN_ON a few lines below
that has never been seen in practice though.
It turns out that the value of page_bytes_left matches the count (by
sectorsize multiples). The loop never reaches the state where count
would go to -1, because page_bytes_left == 0 is found first and this
breaks out.
For clarity, use only plain check on count (and only for positive
value), decrement safely inside the loop. Any other discrepancy after
the whole bio list processing should be reported by the exising
WARN_ON_ONCE as well.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is a leftover from recently removed bio scheduling framework.
Fixes: ba8a9d0795 ("Btrfs: delete the entire async bio submission framework")
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_get_alloc_profile() is a simple wrapper over get_alloc_profile().
The only difference is btrfs_get_alloc_profile() is visible to other
functions in btrfs while get_alloc_profile() is static and thus only
visible to functions in block-group.c.
Let's just fold get_alloc_profile() into btrfs_get_alloc_profile() to
get rid of the unnecessary second function.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Johannes Thumshirn <jth@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
From Dave's testing described below, it's possible to drive a file
system to have bogus values of discardable_extents and _bytes. As
btrfs_discard_calc_delay() is the only user of discardable_extents, we
can correct here for any negative discardable_extents/discardable_bytes.
The problem is not reliably reproducible. The workload that created it
was based on linux git tree, switching between release tags, then
everytihng deleted followed by a full rebalance. At this state the
values of discardable_bytes was 16K and discardable_extents was -1,
expected values 0 and 0.
Repeating the workload again did not correct the bogus values so the
offset seems to be stable once it happens.
Reported-by: David Sterba <dsterba@suse.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Signed-off-by: David Sterba <dsterba@suse.com>
Most callers of free_bitmap() only call it if bitmap_info->bytes is 0.
However, there are certain cases where we may free the free space cache
via __btrfs_remove_free_space_cache(). This exposes a path where
free_bitmap() is called regardless. This may result in a bad accounting
situation for discardable_bytes and discardable_extents. So, remove the
stats and call btrfs_discard_update_discardable().
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Signed-off-by: David Sterba <dsterba@suse.com>
It's less than ideal for small extents to eat into our extent budget, so
force extents <= 32KB into the bitmaps save for the first handful.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently, there is no way for the free space cache to recover from
being serviced by purely bitmaps because the extent threshold is set to
0 in recalculate_thresholds() when we surpass the metadata allowance.
This adds a recovery mechanism by keeping large extents out of the
bitmaps and increases the metadata upper bound to 64KB. The recovery
mechanism bypasses this upper bound, thus making it a soft upper bound.
But, with the bypass being 1MB or greater, it shouldn't add unbounded
overhead.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Give a brief overview for how async discard is implemented.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Keep track of how much we are discarding and how often we are reusing
with async discard. The discard_*_bytes values don't need any special
protection because the work item provides the single threaded access.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
As mentioned earlier, discarding data can be done either by issuing an
explicit discard or implicitly by reusing the LBA. Metadata block_groups
see much more frequent reuse due to well it being metadata. So instead
of explicitly discarding metadata block_groups, just leave them be and
let the latter implicit discarding be done for them.
For mixed block_groups, block_groups which contain both metadata and
data, we let them be as higher fragmentation is expected.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Non-block group destruction discarding currently only had a single list
with no minimum discard length. This can lead to caravaning more
meaningful discards behind a heavily fragmented block group.
This adds support for multiple lists with minimum discard lengths to
prevent the caravan effect. We promote block groups back up when we
exceed the BTRFS_ASYNC_DISCARD_MAX_FILTER size, currently we support
only 2 lists with filters of 1MB and 32KB respectively.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Expose max_discard_size as a tunable via sysfs and switch the current
fixed maximum to the default value.
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Throttle the maximum size of a discard so that we can provide an upper
bound for the rate of async discard. While the block layer is able to
split discards into the appropriate sized discards, we want to be able
to account more accurately the rate at which we are consuming NCQ slots
as well as limit the upper bound of work for a discard.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Provide the ability to rate limit based on kbps in addition to iops as
additional guides for the target discard rate. The delay used ends up
being max(kbps_delay, iops_delay).
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
An earlier patch keeps track of discardable_extents. These are
undiscarded extents managed by the free space cache. Here, we will use
this to dynamically calculate the discard delay interval.
There are 3 rate to consider. The first is the target convergence rate,
the rate to discard all discardable_extents over the
BTRFS_DISCARD_TARGET_MSEC time frame. This is clamped by the lower
limit, the iops limit or BTRFS_DISCARD_MIN_DELAY (1ms), and the upper
limit, BTRFS_DISCARD_MAX_DELAY (1s). We reevaluate this delay every
transaction commit.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Keep track of this metric so that we can understand how ahead or behind
we are in discarding rate. This uses the same accounting method as
discardable_extents, deltas between previous/current values and
propagating them up.
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
The number of discardable extents will serve as the rate limiting metric
for how often we should discard. This keeps track of discardable extents
in the free space caches by maintaining deltas and propagating them to
the global count.
The deltas are calculated from 2 values stored in PREV and CURR entries,
then propagated up to the global discard ctl. The current counter value
becomes the previous counter value after update.
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
Setup base sysfs directory for discard stats + tunables.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Btrfs only allowed attributes to be exposed in debug/. Let's let other
groups be created by making debug its own kobject.
This also makes the per-fs debug options separate from the global
features mount attributes. This seems to be needed as
sysfs_create_files() requires const struct attribute * while
sysfs_create_group() can take struct attribute *. This seems nicer as
per file system, you'll probably use to_fs_info().
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We probably should call sysfs_remove_group() on debug/.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The prior two patches added discarding via a background workqueue. This
just piggybacked off of the fstrim code to trim the whole block at once.
Well inevitably this is worse performance wise and will aggressively
overtrim. But it was nice to plumb the other infrastructure to keep the
patches easier to review.
This adds the real goal of this series which is discarding slowly (ie. a
slow long running fstrim). The discarding is split into two phases,
extents and then bitmaps. The reason for this is two fold. First, the
bitmap regions overlap the extent regions. Second, discarding the
extents first will let the newly trimmed bitmaps have the highest chance
of coalescing when being readded to the free space cache.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
block_group removal is a little tricky. It can race with the extent
allocator, the cleaner thread, and balancing. The current path is for a
block_group to be added to the unused_bgs list. Then, when the cleaner
thread comes around, it starts a transaction and then proceeds with
removing the block_group. Extents that are pinned are subsequently
removed from the pinned trees and then eventually a discard is issued
for the entire block_group.
Async discard introduces another player into the game, the discard
workqueue. While it has none of the racing issues, the new problem is
ensuring we don't leave free space untrimmed prior to forgetting the
block_group. This is handled by placing fully free block_groups on a
separate discard queue. This is necessary to maintain discarding order
as in the future we will slowly trim even fully free block_groups. The
ordering helps us make progress on the same block_group rather than say
the last fully freed block_group or needing to search through the fully
freed block groups at the beginning of a list and insert after.
The new order of events is a fully freed block group gets placed on the
unused discard queue first. Once it's processed, it will be placed on
the unusued_bgs list and then the original sequence of events will
happen, just without the final whole block_group discard.
The mount flags can change when processing unused_bgs, so when flipping
from DISCARD to DISCARD_ASYNC, the unused_bgs must be punted to the
discard_list to be trimmed. If we flip off DISCARD_ASYNC, we punt
free block groups on the discard_list to the unused_bg queue which will
do the final discard for us.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When discard is enabled, everytime a pinned extent is released back to
the block_group's free space cache, a discard is issued for the extent.
This is an overeager approach when it comes to discarding and helping
the SSD maintain enough free space to prevent severe garbage collection
situations.
This adds the beginning of async discard. Instead of issuing a discard
prior to returning it to the free space, it is just marked as untrimmed.
The block_group is then added to a LRU which then feeds into a workqueue
to issue discards at a much slower rate. Full discarding of unused block
groups is still done and will be addressed in a future patch of the
series.
For now, we don't persist the discard state of extents and bitmaps.
Therefore, our failure recovery mode will be to consider extents
untrimmed. This lets us handle failure and unmounting as one in the
same.
On a number of Facebook webservers, I collected data every minute
accounting the time we spent in btrfs_finish_extent_commit() (col. 1)
and in btrfs_commit_transaction() (col. 2). btrfs_finish_extent_commit()
is where we discard extents synchronously before returning them to the
free space cache.
discard=sync:
p99 total per minute p99 total per minute
Drive | extent_commit() (ms) | commit_trans() (ms)
---------------------------------------------------------------
Drive A | 434 | 1170
Drive B | 880 | 2330
Drive C | 2943 | 3920
Drive D | 4763 | 5701
discard=async:
p99 total per minute p99 total per minute
Drive | extent_commit() (ms) | commit_trans() (ms)
--------------------------------------------------------------
Drive A | 134 | 956
Drive B | 64 | 1972
Drive C | 59 | 1032
Drive D | 62 | 1200
While it's not great that the stats are cumulative over 1m, all of these
servers are running the same workload and and the delta between the two
are substantial. We are spending significantly less time in
btrfs_finish_extent_commit() which is responsible for discarding.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There is a cap in btrfs in the amount of free extents that a block group
can have. When it surpasses that threshold, future extents are placed
into bitmaps. Instead of keeping track of if a certain bit is trimmed or
not in a second bitmap, keep track of the relative state of the bitmap.
With async discard, trimming bitmaps becomes a more frequent operation.
As a trade off with simplicity, we keep track of if discarding a bitmap
is in progress. If we fully scan a bitmap and trim as necessary, the
bitmap is marked clean. This has some caveats as the min block size may
skip over regions deemed too small. But this should be a reasonable
trade off rather than keeping a second bitmap and making allocation
paths more complex. The downside is we may overtrim, but ideally the min
block size should prevent us from doing that too often and getting stuck
trimming pathological cases.
BTRFS_TRIM_STATE_TRIMMING is added to indicate a bitmap is in the
process of being trimmed. If additional free space is added to that
bitmap, the bit is cleared. A bitmap will be marked
BTRFS_TRIM_STATE_TRIMMED if the trimming code was able to reach the end
of it and the former is still set.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Async discard will use the free space cache as backing knowledge for
which extents to discard. This patch plumbs knowledge about which
extents need to be discarded into the free space cache from
unpin_extent_range().
An untrimmed extent can merge with everything as this is a new region.
Absorbing trimmed extents is a tradeoff to for greater coalescing which
makes life better for find_free_extent(). Additionally, it seems the
size of a trim isn't as problematic as the trim io itself.
When reading in the free space cache from disk, if sync is set, mark all
extents as trimmed. The current code ensures at transaction commit that
all free space is trimmed when sync is set, so this reflects that.
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This series introduces async discard which will use the flag
DISCARD_ASYNC, so rename the original flag to DISCARD_SYNC as it is
synchronously done in transaction commit.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Bitmaps are fairly popular for their space efficiency, but we don't have
generic iterators available. Make percpu's bitmap region iterators
available to everyone.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[PROBLEM]
There is a user report in the mail list, showing the following corrupted
tree blocks:
item 62 key (486836 DIR_ITEM 2543451757) itemoff 6273 itemsize 74
location key (4065004 INODE_ITEM 1073741824) type FILE
transid 21397 data_len 0 name_len 44
name: FILENAME
Note that location key, its offset should be 0 for all INODE_ITEMS.
This caused failed lookup of the inode.
[CAUSE]
That offending value, 1073741824, is 0x40000000. So this looks like a
memory bit flip.
[FIX]
This patch will enhance tree-checker to check location key of
DIR_INDEX/DIR_ITEM/XATTR_ITEM.
There are several different combinations needs to check:
- item_key.type == DIR_INDEX/DIR_ITEM
* location_key.type == BTRFS_INODE_ITEM_KEY
This location_key should follow the check in inode_item check.
* location_key.type == BTRFS_ROOT_ITEM_KEY
Despite the existing check, DIR_INDEX/DIR_ITEM can only points to
subvolume trees.
* All other keys are not allowed.
- item_key.type == XATTR_ITEM
location_key should be all 0.
Reported-by: Mike Gilbert <floppymaster@gmail.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
ROOT_ITEM key check itself is not as simple as single line check, and
will be reused for both ROOT_ITEM and DIR_ITEM/DIR_INDEX location key
check, so refactor such check into check_root_key().
Also since we are here, fix a comment error about ROOT_ITEM offset,
which is transid of snapshot creation, not some "older kernel behavior".
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Inode key check is not as easy as several lines, and it will be called
in more than one location (INODE_ITEM check and
DIR_ITEM/DIR_INDEX/XATTR_ITEM location key check).
So here refactor such check into check_inode_key(). And add extra
checks for XATTR_ITEM.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The @fs_info parameter can be extracted from extent_buffer structure,
and there are already some wrappers getting rid of the @fs_info
parameter.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Inspired by btrfs-progs github issue #208, where chunk item in chunk
tree has invalid num_stripes (0).
Although that can already be caught by current btrfs_check_chunk_valid(),
that function doesn't really check item size as it needs to handle chunk
item in super block sys_chunk_array().
This patch will add two extra checks for chunk items in chunk tree:
- Basic chunk item size
If the item is smaller than btrfs_chunk (which already contains one
stripe), exit right now as reading num_stripes may even go beyond
eb boundary.
- Item size check against num_stripes
If item size doesn't match with calculated chunk size, then either the
item size or the num_stripes is corrupted. Error out anyway.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This hasn't been used since it was first introduced in commit
b4bd745d12 ("btrfs: Introduce find_free_extent_ctl structure for later
rework"). Passing that to btrfs_add_reserved_bytes in find_free_extent
is not strictly necessary and using the local ram_bytes instead seems
cleaner.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit 7087a9d8db ("btrfs: Remove
extent_io_ops::writepage_end_io_hook") left this logic in a confusing
state. Simplify it.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We only pass this as 1 from __extent_writepage_io(). The parameter
basically means "pretend I didn't pass in a page". This is silly since
we can simply not pass in the page. Get rid of the parameter from
btrfs_get_extent(), and since it's used as a get_extent_t callback,
remove it from get_extent_t and btree_get_extent(), neither of which
need it.
While we're here, let's document btrfs_get_extent().
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In __extent_writepage_io(), we check whether
i_size <= page_offset(page).
Note that if i_size < page_offset(page), then
i_size >> PAGE_SHIFT < page->index.
If i_size == page_offset(page), then
i_size >> PAGE_SHIFT == page->index && offset_in_page(i_size) == 0.
__extent_writepage() already has a check for these cases that
returns without calling __extent_writepage_io():
end_index = i_size >> PAGE_SHIFT
pg_offset = offset_in_page(i_size);
if (page->index > end_index ||
(page->index == end_index && !pg_offset)) {
page->mapping->a_ops->invalidatepage(page, 0, PAGE_SIZE);
unlock_page(page);
return 0;
}
Get rid of the one in __extent_writepage_io(), which was obsoleted in
211c17f51f ("Fix corners in writepage and btrfs_truncate_page").
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since 40f765805f ("Btrfs: split up __extent_writepage to lower stack
usage"), done_unlocked is simply a return 0. Get rid of it.
Mid-statement block returns don seem to make the code less readable here.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We're initializing pg_offset to 0, setting it immediately, then
reassigning it to 0 again after. The former became unnecessary in
211c17f51f ("Fix corners in writepage and btrfs_truncate_page"). The
latter is a leftover that should've been removed in 40f765805f
("Btrfs: split up __extent_writepage to lower stack usage"). Remove
both.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
ordered->start, ordered->len, and ordered->disk_len correspond to
fi->disk_bytenr, fi->num_bytes, and fi->disk_num_bytes, respectively.
It's confusing to translate between the two naming schemes. Since a
btrfs_ordered_extent is basically a pending btrfs_file_extent_item,
let's make the former use the naming from the latter.
Note that I didn't touch the names in tracepoints just in case there are
scripts depending on the current naming.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Snapshot-aware defrag has been disabled since commit 8101c8dbf6
("Btrfs: disable snapshot aware defrag for now") almost 6 years ago.
Let's remove the dead code. If someone is up to the task of bringing it
back, they can dig it up from git.
This is logically a revert of commit 38c227d87c ("Btrfs:
snapshot-aware defrag") except that now we have to clear the
EXTENT_DEFRAG bit to avoid need_force_cow() returning true forever.
The reasons to disable were caused by runtime problems (like long stalls
or memory consumption) on heavily referenced extents (eg. thousands of
snapshots). There were attempts to fix that but never finished.
Current defrag breaks the extent references and some users prefer that
behaviour over the one implemented by snapshot aware (ie. keeping links
for defragmentation). To enable both usecases we'd need to extend
defrag ioctl but let's do that properly from scratch.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ enhance ]
Signed-off-by: David Sterba <dsterba@suse.com>
We can encode this in the offset parameter: -1 means use the page
offsets, anything else is a valid offset.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently, we have two wrappers for __btrfs_lookup_bio_sums():
btrfs_lookup_bio_sums_dio(), which is used for direct I/O, and
btrfs_lookup_bio_sums(), which is used everywhere else. The only
difference is that the _dio variant looks up csums starting at the given
offset instead of using the page index, which isn't actually direct
I/O-specific. Let's clean up the signature and return value of
__btrfs_lookup_bio_sums(), rename it to btrfs_lookup_bio_sums(), and get
rid of the trivial helpers.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When closing a device, btrfs_close_one_device() first allocates a new
device, copies the device to close's name, replaces it in the dev_list
with the copy and then finally frees it.
This involves two memory allocation, which can potentially fail. As this
code path is tricky to unwind, the allocation failures where handled by
BUG_ON()s.
But this copying isn't strictly needed, all that is needed is resetting
the device in question to it's state it had after the allocation.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In btrfs_close_one_device we're decrementing the number of open devices
before we're calling btrfs_close_bdev().
As there is no intermediate exit between these points in this function it
is technically OK to do so, but it makes the code a bit harder to understand.
Move both operations closer together and move the decrement step after
btrfs_close_bdev().
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When you snapshot a subvolume containing a subvolume, you get a
placeholder directory where the subvolume would be. These directories
have their own btrfs_dir_ro_inode_operations.
Al pointed out [1] that these directories can use simple_lookup()
instead of btrfs_lookup(), as they are always empty. Furthermore, they
can use the default generic_permission() instead of btrfs_permission();
the additional checks in the latter don't matter because we can't write
to the directory anyways. Finally, they can use the default
generic_update_time() instead of btrfs_update_time(), as the inode
doesn't exist on disk and doesn't need any special handling.
All together, this means that we can get rid of
btrfs_dir_ro_inode_operations and use simple_dir_inode_operations
instead.
1: https://lore.kernel.org/linux-btrfs/20190929052934.GY26530@ZenIV.linux.org.uk/
Cc: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add comment ]
Signed-off-by: David Sterba <dsterba@suse.com>
We have a user report, that cppcheck is complaining about a possible
NULL-pointer dereference in btrfs_destroy_dev_replace_tgtdev().
We're first dereferencing the 'tgtdev' variable and the later check for
the validity of the pointer with a WARN_ON(!tgtdev);
But all callers of btrfs_destroy_dev_replace_tgtdev() either explicitly
check if 'tgtdev' is non-NULL or directly allocate 'tgtdev', so the
WARN_ON() is impossible to hit. Just remove it to silence the checker's
complains.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=205003
Signed-off-by: Johannes Thumshirn <jth@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfsic_process_superblock() BUG_ON()s if 'state' is NULL. But this can
never happen as the only caller from btrfsic_process_superblock() is
btrfsic_mount() which allocates 'state' some lines above calling
btrfsic_process_superblock() and checks for the allocation to succeed.
Let's just remove the impossible to hit BUG_ON().
Signed-off-by: Johannes Thumshirn <jth@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
A user reports a possible NULL-pointer dereference in
btrfsic_process_superblock(). We are assigning state->fs_info to a local
fs_info variable and afterwards checking for the presence of state.
While we would BUG_ON() a NULL state anyways, we can also just remove
the local fs_info copy, as fs_info is only used once as the first
argument for btrfs_num_copies(). There we can just pass in
state->fs_info as well.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=205003
Signed-off-by: Johannes Thumshirn <jth@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is a relic from a time before we had a proper reservation mechanism
and you could end up with really full chunks at chunk allocation time.
This doesn't make sense anymore, so just kill it.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
