Add support for Lemans TLMM configuration and control via the pinctrl
framework.
Signed-off-by: Yadu MG <quic_ymg@quicinc.com>
Signed-off-by: Prasad Sodagudi <quic_psodagud@quicinc.com>
[Bartosz: made the driver ready for upstream]
Co-developed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230201150011.200613-3-brgl@bgdev.pl
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* Add ~4kOhm bias support to Intel pin control drivers
* Convert Intel pin control drivers to use INTEL_COMMUNITY_*()
* Add struct pinfunction and use it in Intel pin control drivers
* Make pin control documentation up to date
* Miscellaneous cleanups
The following is an automated git shortlog grouped by driver:
pinctrl:
- Proofreading and updating the documentation accordingly
- Proofreading and updating the documentation (part 2)
alderlake:
- Replace ADL_COMMUNITY() by INTEL_COMMUNITY_GPPS()
baytrail:
- Convert to use new memeber in struct intel_function
broxton:
- Replace BXT_COMMUNITY() by INTEL_COMMUNITY_SIZE()
cannonlake:
- Replace CNL_COMMUNITY() by INTEL_COMMUNITY_GPPS()
cedarfork:
- Replace CDF_COMMUNITY() by INTEL_COMMUNITY_GPPS()
cherryview:
- Convert to use new memeber in struct intel_function
denverton:
- Replace DNV_COMMUNITY() by INTEL_COMMUNITY_GPPS()
elkhartlake:
- Replace EHL_COMMUNITY() by INTEL_COMMUNITY_GPPS()
emmitsburg:
- Replace EBG_COMMUNITY() by INTEL_COMMUNITY_GPPS()
geminilake:
- Replace GLK_COMMUNITY() by INTEL_COMMUNITY_SIZE()
icelake:
- Replace ICL_COMMUNITY() by INTEL_COMMUNITY_GPPS()
intel:
- Get rid of unused members in struct intel_function
- Make use of struct pinfunction and PINCTRL_PINFUNCTION()
- Define maximum pad number in the group
- Use same order of bit fields for PADCFG2
- Add ~4k bias support
- Add definitions to all possible biases
- Deduplicate some code in intel_config_set_pull()
- Add default case to intel_config_set_pull()
- Convert to generic_handle_domain_irq()
- Always use gpp_num_padown_regs in the main driver
- Introduce INTEL_COMMUNITY_*() to unify community macros
Introduce struct pinfunction and PINCTRL_PINFUNCTION() macro:
- Introduce struct pinfunction and PINCTRL_PINFUNCTION() macro
jasperlake:
- Replace JSL_COMMUNITY() by INTEL_COMMUNITY_GPPS()
lakefield:
- Replace LKF_COMMUNITY() by INTEL_COMMUNITY_GPPS()
lewisburg:
- Replace LBG_COMMUNITY() by INTEL_COMMUNITY_SIZE()
lynxpoint:
- Convert to use new memeber in struct intel_function
merrifield:
- Convert to use new memeber in struct intel_function
meteorlake:
- Replace MTL_COMMUNITY() by INTEL_COMMUNITY_GPPS()
moorefield:
- Convert to use new memeber in struct intel_function
sunrisepoint:
- Replace SPT_COMMUNITY() by INTEL_COMMUNITY_*()
tigerlake:
- Replace TGL_COMMUNITY() by INTEL_COMMUNITY_GPPS()
-----BEGIN PGP SIGNATURE-----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=ZLEJ
-----END PGP SIGNATURE-----
Merge tag 'intel-pinctrl-v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into devel
intel-pinctrl for v6.3-1
* Add ~4kOhm bias support to Intel pin control drivers
* Convert Intel pin control drivers to use INTEL_COMMUNITY_*()
* Add struct pinfunction and use it in Intel pin control drivers
* Make pin control documentation up to date
* Miscellaneous cleanups
The following is an automated git shortlog grouped by driver:
pinctrl:
- Proofreading and updating the documentation accordingly
- Proofreading and updating the documentation (part 2)
alderlake:
- Replace ADL_COMMUNITY() by INTEL_COMMUNITY_GPPS()
baytrail:
- Convert to use new memeber in struct intel_function
broxton:
- Replace BXT_COMMUNITY() by INTEL_COMMUNITY_SIZE()
cannonlake:
- Replace CNL_COMMUNITY() by INTEL_COMMUNITY_GPPS()
cedarfork:
- Replace CDF_COMMUNITY() by INTEL_COMMUNITY_GPPS()
cherryview:
- Convert to use new memeber in struct intel_function
denverton:
- Replace DNV_COMMUNITY() by INTEL_COMMUNITY_GPPS()
elkhartlake:
- Replace EHL_COMMUNITY() by INTEL_COMMUNITY_GPPS()
emmitsburg:
- Replace EBG_COMMUNITY() by INTEL_COMMUNITY_GPPS()
geminilake:
- Replace GLK_COMMUNITY() by INTEL_COMMUNITY_SIZE()
icelake:
- Replace ICL_COMMUNITY() by INTEL_COMMUNITY_GPPS()
intel:
- Get rid of unused members in struct intel_function
- Make use of struct pinfunction and PINCTRL_PINFUNCTION()
- Define maximum pad number in the group
- Use same order of bit fields for PADCFG2
- Add ~4k bias support
- Add definitions to all possible biases
- Deduplicate some code in intel_config_set_pull()
- Add default case to intel_config_set_pull()
- Convert to generic_handle_domain_irq()
- Always use gpp_num_padown_regs in the main driver
- Introduce INTEL_COMMUNITY_*() to unify community macros
Introduce struct pinfunction and PINCTRL_PINFUNCTION() macro:
- Introduce struct pinfunction and PINCTRL_PINFUNCTION() macro
jasperlake:
- Replace JSL_COMMUNITY() by INTEL_COMMUNITY_GPPS()
lakefield:
- Replace LKF_COMMUNITY() by INTEL_COMMUNITY_GPPS()
lewisburg:
- Replace LBG_COMMUNITY() by INTEL_COMMUNITY_SIZE()
lynxpoint:
- Convert to use new memeber in struct intel_function
merrifield:
- Convert to use new memeber in struct intel_function
meteorlake:
- Replace MTL_COMMUNITY() by INTEL_COMMUNITY_GPPS()
moorefield:
- Convert to use new memeber in struct intel_function
sunrisepoint:
- Replace SPT_COMMUNITY() by INTEL_COMMUNITY_*()
tigerlake:
- Replace TGL_COMMUNITY() by INTEL_COMMUNITY_GPPS()
- Add pin groups for Video-In channels 4 and 5 on R-Car H3 ES1.x,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCY9OikgAKCRCKwlD9ZEnx
cOR6AP44CdQSYTJyvmVXgpAXWOXOi9Sb8qepzd+W8KTRnpKjjwEAsw0s47FX2UKn
42t+ogdLb9eqGezdciNJOsXF5ybJ4Ao=
=NQNh
-----END PGP SIGNATURE-----
Merge tag 'renesas-pinctrl-for-v6.3-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: renesas: Updates for v6.3
- Add pin groups for Video-In channels 4 and 5 on R-Car H3 ES1.x,
- Miscellaneous fixes and improvements.
AT91 pinctrl deferred probing support is broken if the GPIO devices
haven't probed first and set gpio_banks to non-zero. The later condition
that only some GPIO devices haven't probed can't actually happen as
either all the GPIO devices have probed first or none of them have. Plus
the pinctrl driver has already returned -EINVAL, so it's not on the
deferred list to retry probing.
Fix this by consolidating the checking that all GPIO devices are probed.
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-gpio@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Tested-by: Nicolas Ferre <nicolas.ferre@microchip.com> # on sama5d3 xplained
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20180712192222.32481-1-robh@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tag the suspend/resume callbacks as __maybe_unused to silence
complaints from the build robots.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add pins, groups, and functions for channels 4 and 5 of the Video Input
Module (VIN) on the Renesas R-Car H3 ES1.x (R8A77950) SoC, based on
the version for the R-Car H3 ES2.0+ (R8A77951) SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/92c9b3b535d27ea7fcc0aa73d298783d710c214a.1673425207.git.geert+renesas@glider.be
Add BUILD_BUG_ON() checks to avoid overflows for GPIO configs for each
supported SoC.
While at it, for readability set n_port_pins based on the GPIO pin configs
and not on GPIO names for r9a07g044_data as done for r9a07g043_data.
Suggested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230102221815.273719-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
On the RZ/G2UL SoC we have less number of pins compared to RZ/G2L and also
the pin configs are completely different. This patch makes sure we use the
appropriate pin configs for each SoC (which is passed as part of the OF
data) while configuring the GPIO pin as interrupts instead of using
rzg2l_gpio_configs[] for all the SoCs.
Fixes: bfc69bdbaa ("pinctrl: renesas: rzg2l: Add RZ/G2UL support")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230102221815.273719-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Coverity spotted that *buf is not initialized to zero in
mtk_pctrl_dbg_show. Using uninitialized variable *buf as argument to %s
when calling seq_printf. Fix this coverity by initializing *buf as zero.
Fixes: 184d8e13f9 ("pinctrl: mediatek: Add support for pin configuration dump via debugfs.")
Signed-off-by: Guodong Liu <Guodong.Liu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230118062036.26258-3-Guodong.Liu@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Coverity spotted that pullen and pullup is not initialized to zero in
mtk_pctrl_show_one_pin. The uninitialized variable pullen is used in
assignment statement "rsel = pullen;" in mtk_pctrl_show_one_pin, and
Uninitialized variable pullup is used when calling scnprintf. Fix this
coverity by initializing pullen and pullup as zero.
Fixes: 184d8e13f9 ("pinctrl: mediatek: Add support for pin configuration dump via debugfs.")
Signed-off-by: Guodong Liu <Guodong.Liu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230118062036.26258-2-Guodong.Liu@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Yeah, while the ->add_pin_ranges() shouldn't be used by DT drivers,
this one requires it to support quite old firmware descriptions that
do not have gpio-ranges property.
The change allows to clean up GPIO library from OF specifics.
There is no functional change intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20230113215352.44272-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The driver doesn't depend on the OF to be complied. Hence
the proper header to use is mod_devicetable.h. Replace of*.h with
the above mentioned and drop redundant dependency.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Link: https://lore.kernel.org/r/20230113143640.24302-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The of_gpio_n_cells default is 2 when ->of_xlate() callback is
not defined. No need to assign it explicitly in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Link: https://lore.kernel.org/r/20230113143640.24302-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The of_gpio_n_cells default is 2 when ->of_xlate() callback is
not defined. No need to assign it explicitly in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230112185122.45216-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The of_gpio_n_cells default is 2 when ->of_xlate() callback is
not defined. No need to assign it explicitly in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230112184923.80442-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The of_gpio_n_cells default is 2 when ->of_xlate() callback is
not defined. No need to assign it explicitly in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230112184340.79606-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
These variables define a list of functions which can be muxed to the pin
group which the name of the pin group was originally intended to be pointed
out on the name of the said variables.
Therefore, rename "func" to "grp" across all subdrivers where this applies.
Fixes: 18653d4bd8 ("pinctrl: ralink: rename variable names for functions on MT7620 and MT7621")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20221231160849.40544-2-arinc.unal@arinc9.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221118224540.619276-512-uwe@kleine-koenig.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl_get_group_selector() prints an error message when group
is not found in the list. No need to repeat this in the caller.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230109132719.86009-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221118224540.619276-511-uwe@kleine-koenig.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add support for the general purpose clocks that are found on MSM8226.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Co-developed-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Link: https://lore.kernel.org/r/20230106114403.275865-3-matti.lehtimaki@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add support for the pm8550, pm8550b, pm8550ve, pm8550vs, pmk8550 & pmr735d
gpio controllers providing GPIO control over SPMI.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20221114-narmstrong-sm8550-upstream-spmi-v2-3-b839bf2d558a@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
of_find_node_by_phandle() returns a node pointer with refcount incremented,
We should use of_node_put() on it when not needed anymore.
Add missing of_node_put() to avoid refcount leak.
Fixes: d3e5116119 ("pinctrl: add pinctrl driver for Rockchip SoCs")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20230102112845.3982407-1-linmq006@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
of_irq_find_parent() returns a node pointer with refcount incremented,
We should use of_node_put() on it when not needed anymore.
Add missing of_node_put() to avoid refcount leak.
Fixes: d86f4d71e4 ("pinctrl: stm32: check irq controller availability at probe")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20230102082503.3944927-1-linmq006@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Adjust names of function for wcss pins, also fix third gpio in bt group.
Fixes: bcd11493f0 ("pinctrl: qcom: Add a pinctrl driver for MSM8976 and 8956")
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Link: https://lore.kernel.org/r/20221231164250.74550-1-a39.skl@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add pinctrl driver for TLMM block found in SM8550 SoC.
Co-developed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20221230203637.2539900-3-abel.vesa@linaro.org
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The driver has been converted to a generic data type and macro for
the pin function definition, hence get rid of not used members in
the struct intel_function.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Convert driver to use generic data type and hence a new member in
the struct intel_function. No functional change intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Convert driver to use generic data type and hence a new member in
the struct intel_function. No functional change intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Convert driver to use generic data type and hence a new member in
the struct intel_function. No functional change intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Convert driver to use generic data type and hence a new member in
the struct intel_function. No functional change intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Convert driver to use generic data type and hence a new member in
the struct intel_function. No functional change intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Since pin control provides a generic data type and a macro for
the pin function definition, use them in the Intel driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Add pin control driver for the TLMM block found in the QDU1000
and QRU1000 SoC.
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20221216230852.21691-3-quic_molvera@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
With the old SET_NOIRQ_SYSTEM_SLEEP_PM_OPS, some configs result in a
build warning:
drivers/pinctrl/pinctrl-at91.c:1668:12: error: 'at91_gpio_resume' defined but not used [-Werror=unused-function]
1668 | static int at91_gpio_resume(struct device *dev)
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/pinctrl-at91.c:1650:12: error: 'at91_gpio_suspend' defined but not used [-Werror=unused-function]
1650 | static int at91_gpio_suspend(struct device *dev)
| ^~~~~~~~~~~~~~~~~
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Link: https://lore.kernel.org/r/20221215164301.934805-1-arnd@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Defines prefixed with "CONFIG" should be limited to proper Kconfig options,
that are introduced in a Kconfig file.
Here, expressions to convert pin configurations to booleans for pull-up,
voltage and mA are macro definitions that begin with "CONFIG".
To avoid defines prefixed with "CONFIG", rename these defines to begin with
"PIN_CONFIG" instead.
No functional change.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20221215092128.3954-1-lukas.bulwahn@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
GPIO registers include Bit 27 for WakeCntrlZ used to enable wake in
Z state. Hence add Z-state wake control bits to debugfs output to
debug and analyze Z-states problems.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Suggested-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Guruvendra Punugupati <Guruvendra.Punugupati@amd.com>
Link: https://lore.kernel.org/r/20221208093704.1151928-1-Basavaraj.Natikar@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Instead of using hard coded magic number here and there,
define maximum pad number in the group in newly added
INTEL_PINCTRL_MAX_GPP_SIZE.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
PADCFG0 and PADCFG1 are ordered from MSB to LSB, do the same
for PADCFG2 bit fields. No functional changes intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
All versions that have 20k and 5k resistance, i.e. all that
the driver supports, may support ~4k when the above mentioned
are connected in parallel. Add such a support.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Add definitions to all possible biases, i.e. add ~800 Ohms,
~952 Ohms, ~4 kOhms.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
First part is to assign default argument for all cases, since
bias disablement doesn't use it anyway.
Second part is to clear all bits in the bias setting and
depending on the argument and parameter set them as asked.
While at it, add break statement to the default cases.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
For the sake of symmetry with intel_config_get_pull(), add
a default case to the outer switch.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
