Add support for Lemans TLMM configuration and control via the pinctrl
framework.
Signed-off-by: Yadu MG <quic_ymg@quicinc.com>
Signed-off-by: Prasad Sodagudi <quic_psodagud@quicinc.com>
[Bartosz: made the driver ready for upstream]
Co-developed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230201150011.200613-3-brgl@bgdev.pl
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* Add ~4kOhm bias support to Intel pin control drivers
* Convert Intel pin control drivers to use INTEL_COMMUNITY_*()
* Add struct pinfunction and use it in Intel pin control drivers
* Make pin control documentation up to date
* Miscellaneous cleanups
The following is an automated git shortlog grouped by driver:
pinctrl:
- Proofreading and updating the documentation accordingly
- Proofreading and updating the documentation (part 2)
alderlake:
- Replace ADL_COMMUNITY() by INTEL_COMMUNITY_GPPS()
baytrail:
- Convert to use new memeber in struct intel_function
broxton:
- Replace BXT_COMMUNITY() by INTEL_COMMUNITY_SIZE()
cannonlake:
- Replace CNL_COMMUNITY() by INTEL_COMMUNITY_GPPS()
cedarfork:
- Replace CDF_COMMUNITY() by INTEL_COMMUNITY_GPPS()
cherryview:
- Convert to use new memeber in struct intel_function
denverton:
- Replace DNV_COMMUNITY() by INTEL_COMMUNITY_GPPS()
elkhartlake:
- Replace EHL_COMMUNITY() by INTEL_COMMUNITY_GPPS()
emmitsburg:
- Replace EBG_COMMUNITY() by INTEL_COMMUNITY_GPPS()
geminilake:
- Replace GLK_COMMUNITY() by INTEL_COMMUNITY_SIZE()
icelake:
- Replace ICL_COMMUNITY() by INTEL_COMMUNITY_GPPS()
intel:
- Get rid of unused members in struct intel_function
- Make use of struct pinfunction and PINCTRL_PINFUNCTION()
- Define maximum pad number in the group
- Use same order of bit fields for PADCFG2
- Add ~4k bias support
- Add definitions to all possible biases
- Deduplicate some code in intel_config_set_pull()
- Add default case to intel_config_set_pull()
- Convert to generic_handle_domain_irq()
- Always use gpp_num_padown_regs in the main driver
- Introduce INTEL_COMMUNITY_*() to unify community macros
Introduce struct pinfunction and PINCTRL_PINFUNCTION() macro:
- Introduce struct pinfunction and PINCTRL_PINFUNCTION() macro
jasperlake:
- Replace JSL_COMMUNITY() by INTEL_COMMUNITY_GPPS()
lakefield:
- Replace LKF_COMMUNITY() by INTEL_COMMUNITY_GPPS()
lewisburg:
- Replace LBG_COMMUNITY() by INTEL_COMMUNITY_SIZE()
lynxpoint:
- Convert to use new memeber in struct intel_function
merrifield:
- Convert to use new memeber in struct intel_function
meteorlake:
- Replace MTL_COMMUNITY() by INTEL_COMMUNITY_GPPS()
moorefield:
- Convert to use new memeber in struct intel_function
sunrisepoint:
- Replace SPT_COMMUNITY() by INTEL_COMMUNITY_*()
tigerlake:
- Replace TGL_COMMUNITY() by INTEL_COMMUNITY_GPPS()
-----BEGIN PGP SIGNATURE-----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=ZLEJ
-----END PGP SIGNATURE-----
Merge tag 'intel-pinctrl-v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into devel
intel-pinctrl for v6.3-1
* Add ~4kOhm bias support to Intel pin control drivers
* Convert Intel pin control drivers to use INTEL_COMMUNITY_*()
* Add struct pinfunction and use it in Intel pin control drivers
* Make pin control documentation up to date
* Miscellaneous cleanups
The following is an automated git shortlog grouped by driver:
pinctrl:
- Proofreading and updating the documentation accordingly
- Proofreading and updating the documentation (part 2)
alderlake:
- Replace ADL_COMMUNITY() by INTEL_COMMUNITY_GPPS()
baytrail:
- Convert to use new memeber in struct intel_function
broxton:
- Replace BXT_COMMUNITY() by INTEL_COMMUNITY_SIZE()
cannonlake:
- Replace CNL_COMMUNITY() by INTEL_COMMUNITY_GPPS()
cedarfork:
- Replace CDF_COMMUNITY() by INTEL_COMMUNITY_GPPS()
cherryview:
- Convert to use new memeber in struct intel_function
denverton:
- Replace DNV_COMMUNITY() by INTEL_COMMUNITY_GPPS()
elkhartlake:
- Replace EHL_COMMUNITY() by INTEL_COMMUNITY_GPPS()
emmitsburg:
- Replace EBG_COMMUNITY() by INTEL_COMMUNITY_GPPS()
geminilake:
- Replace GLK_COMMUNITY() by INTEL_COMMUNITY_SIZE()
icelake:
- Replace ICL_COMMUNITY() by INTEL_COMMUNITY_GPPS()
intel:
- Get rid of unused members in struct intel_function
- Make use of struct pinfunction and PINCTRL_PINFUNCTION()
- Define maximum pad number in the group
- Use same order of bit fields for PADCFG2
- Add ~4k bias support
- Add definitions to all possible biases
- Deduplicate some code in intel_config_set_pull()
- Add default case to intel_config_set_pull()
- Convert to generic_handle_domain_irq()
- Always use gpp_num_padown_regs in the main driver
- Introduce INTEL_COMMUNITY_*() to unify community macros
Introduce struct pinfunction and PINCTRL_PINFUNCTION() macro:
- Introduce struct pinfunction and PINCTRL_PINFUNCTION() macro
jasperlake:
- Replace JSL_COMMUNITY() by INTEL_COMMUNITY_GPPS()
lakefield:
- Replace LKF_COMMUNITY() by INTEL_COMMUNITY_GPPS()
lewisburg:
- Replace LBG_COMMUNITY() by INTEL_COMMUNITY_SIZE()
lynxpoint:
- Convert to use new memeber in struct intel_function
merrifield:
- Convert to use new memeber in struct intel_function
meteorlake:
- Replace MTL_COMMUNITY() by INTEL_COMMUNITY_GPPS()
moorefield:
- Convert to use new memeber in struct intel_function
sunrisepoint:
- Replace SPT_COMMUNITY() by INTEL_COMMUNITY_*()
tigerlake:
- Replace TGL_COMMUNITY() by INTEL_COMMUNITY_GPPS()
- Add pin groups for Video-In channels 4 and 5 on R-Car H3 ES1.x,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCY9OikgAKCRCKwlD9ZEnx
cOR6AP44CdQSYTJyvmVXgpAXWOXOi9Sb8qepzd+W8KTRnpKjjwEAsw0s47FX2UKn
42t+ogdLb9eqGezdciNJOsXF5ybJ4Ao=
=NQNh
-----END PGP SIGNATURE-----
Merge tag 'renesas-pinctrl-for-v6.3-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: renesas: Updates for v6.3
- Add pin groups for Video-In channels 4 and 5 on R-Car H3 ES1.x,
- Miscellaneous fixes and improvements.
Set of cleanups and fixes for Qualcomm pin controller bindings, to match
existing DTS and correct the schema.
-----BEGIN PGP SIGNATURE-----
iQJEBAABCgAuFiEE3dJiKD0RGyM7briowTdm5oaLg9cFAmPK0z0QHGtyemtAa2Vy
bmVsLm9yZwAKCRDBN2bmhouD1/SQD/wJg0b+a76FBFbckFglgxhi90jsTZo3lXG9
TCZzZzVIl2pGGipxPpAzrrIQ5F7nF9HdD0ngirxWZjJB8tubeTXav0G/5Mnh9uLq
RcQcDKpMZAoH8g/C+tN9DOBq8WeGeAN+dSSBE3nfMsHN5JnbADbgWkVHf57WYfMq
2kh0609JUcgg5rqg3GxhOJqQfbyDMK3EC+fyqkuqiBacT9uRXlbwzqQ4cDmNlVi9
4SFbnDHXNXhsykhegz6bZU+nwepumnoPMXuTWjspSoSeeb1anQNDe8lR+x7i2kJA
1V6AOC/mpllxU4n6RenVq9+ASEsa6oQ/TKNu5+oGalvQPAnFoTKk0c7TbZTecFC6
pM0ograh1bNTUqDxw4LNCF6QVDcjTci2h0vXWKk8MFVTJgOUfBg6u5Yh824Q7yDk
crrNaMxwL2et6q0tNmcEuXqtLHLiwhmh0qflMgXU/+iHCfIohepE4ktjLSduvUCo
bvM+xAbZl9l4jlATbOJNQ3LGEKBAjlZAbYhb4imWR1ndW6MhXMYf4AjEB9pgeM8S
bXC9kdfcqG1WxwVq+LNY9kYZ43dUhARzQmueY49QLEiTHJeHVHVD+FlqjBH9KZ/g
jjMAE+VYXxt3cmvSVbTurH802BKzAskdDlsySTjEvGKbXxP6InFb9jb75EScYLP3
Xl2k476vIg==
=RdQE
-----END PGP SIGNATURE-----
Merge tag 'qcom-pinctrl-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into devel
Qualcomm pinctrl Devicetree bindings changes for v6.3
Set of cleanups and fixes for Qualcomm pin controller bindings, to match
existing DTS and correct the schema.
AT91 pinctrl deferred probing support is broken if the GPIO devices
haven't probed first and set gpio_banks to non-zero. The later condition
that only some GPIO devices haven't probed can't actually happen as
either all the GPIO devices have probed first or none of them have. Plus
the pinctrl driver has already returned -EINVAL, so it's not on the
deferred list to retry probing.
Fix this by consolidating the checking that all GPIO devices are probed.
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-gpio@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Tested-by: Nicolas Ferre <nicolas.ferre@microchip.com> # on sama5d3 xplained
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20180712192222.32481-1-robh@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The child node name patterns in Mediatek pinctrl bindings don't match
reality. I don't know where '-[0-9]+$' came from, but I don't see any nodes
with a matching pattern. Also, patterns such as 'pins' or 'mux' are
ambiguous because any prefix or suffix is allowed. If that's desired, it
should be explicit.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230120020536.3229300-1-robh@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tag the suspend/resume callbacks as __maybe_unused to silence
complaints from the build robots.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add pins, groups, and functions for channels 4 and 5 of the Video Input
Module (VIN) on the Renesas R-Car H3 ES1.x (R8A77950) SoC, based on
the version for the R-Car H3 ES2.0+ (R8A77951) SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/92c9b3b535d27ea7fcc0aa73d298783d710c214a.1673425207.git.geert+renesas@glider.be
Add BUILD_BUG_ON() checks to avoid overflows for GPIO configs for each
supported SoC.
While at it, for readability set n_port_pins based on the GPIO pin configs
and not on GPIO names for r9a07g044_data as done for r9a07g043_data.
Suggested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230102221815.273719-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
On the RZ/G2UL SoC we have less number of pins compared to RZ/G2L and also
the pin configs are completely different. This patch makes sure we use the
appropriate pin configs for each SoC (which is passed as part of the OF
data) while configuring the GPIO pin as interrupts instead of using
rzg2l_gpio_configs[] for all the SoCs.
Fixes: bfc69bdbaa ("pinctrl: renesas: rzg2l: Add RZ/G2UL support")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230102221815.273719-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Coverity spotted that *buf is not initialized to zero in
mtk_pctrl_dbg_show. Using uninitialized variable *buf as argument to %s
when calling seq_printf. Fix this coverity by initializing *buf as zero.
Fixes: 184d8e13f9 ("pinctrl: mediatek: Add support for pin configuration dump via debugfs.")
Signed-off-by: Guodong Liu <Guodong.Liu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230118062036.26258-3-Guodong.Liu@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Coverity spotted that pullen and pullup is not initialized to zero in
mtk_pctrl_show_one_pin. The uninitialized variable pullen is used in
assignment statement "rsel = pullen;" in mtk_pctrl_show_one_pin, and
Uninitialized variable pullup is used when calling scnprintf. Fix this
coverity by initializing pullen and pullup as zero.
Fixes: 184d8e13f9 ("pinctrl: mediatek: Add support for pin configuration dump via debugfs.")
Signed-off-by: Guodong Liu <Guodong.Liu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230118062036.26258-2-Guodong.Liu@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This reverts commit 3550bba25d.
No users for this one, revert it for good.
The ->add_pin_ranges() can be used instead.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20230113215352.44272-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Yeah, while the ->add_pin_ranges() shouldn't be used by DT drivers,
this one requires it to support quite old firmware descriptions that
do not have gpio-ranges property.
The change allows to clean up GPIO library from OF specifics.
There is no functional change intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20230113215352.44272-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The ->add_pin_ranges() is supposed to be called for the backward
compatiblity on Device Tree platforms or non-DT ones. Ensure that
by checking presense of the "gpio-ranges" property.
This allows to clean up a few existing drivers to avoid duplication
of the check.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20230113215352.44272-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Just 'mpp' is a bit ambiguous for a pattern as it allows any prefix or
suffix. Change the node name pattern to "-pins$" to align with other
Qualcomm pinctrl bindings.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230120165103.1278852-1-robh@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Do the following:
- update the "Definitions" style in two sections
- don't use "I" for technical documentation
- inline the remaining (variables, function names, file paths)
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Proofreading and updating the documentation accordingly, i.e. fixed:
- ambiguity of foo_set_mux() implementation and explanations
- semantics in some of the examples, e.g. _probe() --> _init()
- references to the callbacks to make them start with dot
- references to the legacy API by replacing them with newer one
- indentation in some of the examples
- double words or phrases
updated:
- unsigned --> unsigned int in some of the examples
- use struct pingroup and PINCTRL_PINGROUP() in some of the examples
- use struct pinfunction and PINCTRL_PINFUNCTION() in some of the examples
and enabled:
- syntax highlighting for the examples in the programming languages
- chapter references
Yet to clarify:
- "gpioN" menton for the default function when requesting GPIO
Co-developed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
The driver doesn't depend on the OF to be complied. Hence
the proper header to use is mod_devicetable.h. Replace of*.h with
the above mentioned and drop redundant dependency.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Link: https://lore.kernel.org/r/20230113143640.24302-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The of_gpio_n_cells default is 2 when ->of_xlate() callback is
not defined. No need to assign it explicitly in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Link: https://lore.kernel.org/r/20230113143640.24302-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The of_gpio_n_cells default is 2 when ->of_xlate() callback is
not defined. No need to assign it explicitly in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230112185122.45216-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The of_gpio_n_cells default is 2 when ->of_xlate() callback is
not defined. No need to assign it explicitly in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230112184923.80442-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The of_gpio_n_cells default is 2 when ->of_xlate() callback is
not defined. No need to assign it explicitly in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230112184340.79606-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Not every function can be muxed to a group. Add proper binding which
documents which function can be muxed to a group or set of groups.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20221231160849.40544-7-arinc.unal@arinc9.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Not every function can be muxed to a group. Add proper binding which
documents which function can be muxed to a group or set of groups.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20221231160849.40544-6-arinc.unal@arinc9.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Not every function can be muxed to a group. Add proper binding which
documents which function can be muxed to a group or set of groups.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20221231160849.40544-5-arinc.unal@arinc9.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Not every function can be muxed to a group. Add proper binding which
documents which function can be muxed to a group or set of groups.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20221231160849.40544-4-arinc.unal@arinc9.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Not every function can be muxed to a group. Add proper binding which
documents which function can be muxed to a group or set of groups.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20221231160849.40544-3-arinc.unal@arinc9.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
These variables define a list of functions which can be muxed to the pin
group which the name of the pin group was originally intended to be pointed
out on the name of the said variables.
Therefore, rename "func" to "grp" across all subdrivers where this applies.
Fixes: 18653d4bd8 ("pinctrl: ralink: rename variable names for functions on MT7620 and MT7621")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20221231160849.40544-2-arinc.unal@arinc9.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221118224540.619276-512-uwe@kleine-koenig.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Almost all Qualcomm SoC Top Level Mode Multiplexers come with only
summary interrupt. SM6350 is different because downstream and upstream
DTS have nine of the interrupts. Allow such variation.
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221230135645.56401-7-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Allow gpio-line-names property (quite commonly used) and constrain
gpio-reserved-ranges:
sm8350-sony-xperia-sagami-pdx215.dtb: pinctrl@f100000: 'gpio-line-names' does not match any of the regexes: '-state$', 'pinctrl-[0-9]+'
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221230135645.56401-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Allow bias-bus-hold and input-enable properties (already used in
SC8280XP LPASS LPI nodes):
sa8540p-ride.dtb: pinctrl@33c0000: tx-swr-default-state: 'oneOf' conditional failed, one must be fixed:
'pins' is a required property
'function' is a required property
'clk-pins', 'data-pins' do not match any of the regexes: 'pinctrl-[0-9]+'
'bias-bus-hold' does not match any of the regexes: 'pinctrl-[0-9]+'
Link: https://lore.kernel.org/r/20221230135645.56401-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
SC8280XP LPASS LPI pin controller has GPIO 0-18:
sa8540p-ride.dtb: pinctrl@33c0000: tx-swr-default-state: 'oneOf' conditional failed, one must be fixed:
'pins' is a required property
'function' is a required property
'clk-pins', 'data-pins' do not match any of the regexes: 'pinctrl-[0-9]+'
'bias-bus-hold' does not match any of the regexes: 'pinctrl-[0-9]+'
'gpio2' does not match '^gpio([0-1]|1[0-8])$'
Fixes: 958bb025f5 ("dt-bindings: pinctrl: qcom: Add sc8280xp lpass lpi pinctrl bindings")
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221230135645.56401-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Allow bias-bus-hold and input-enable properties (already used in SM8450):
sm8450-qrd.dtb: pinctrl@3440000: dmic02-default-state: 'oneOf' conditional failed, one must be fixed:
'pins' is a required property
'function' is a required property
'clk-pins', 'data-pins' do not match any of the regexes: 'pinctrl-[0-9]+'
'input-enable' does not match any of the regexes: 'pinctrl-[0-9]+'
Compact the properties which are just set to true for readability.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221222161420.172824-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The SM8450 has GPIOs from 0 to 209, so 210 in total:
sm8450-sony-xperia-nagara-pdx223.dtb: pinctrl@f100000: gpio-line-names:
['NC', 'NC', 'NC', 'NC', 'WLC_I2C_SDA', 'WLC_I2C_SCL', ...
'APPS_I2C_0_SDA', 'APPS_I2C_0_SCL', 'CCI_I2C3_SDA', 'CCI_I2C3_SCL'] is too long
Fixes: 9779ed30f9 ("dt-bindings: pinctrl: qcom,sm8450-pinctrl: add gpio-line-names")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221223132226.81340-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl_get_group_selector() prints an error message when group
is not found in the list. No need to repeat this in the caller.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230109132719.86009-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221118224540.619276-511-uwe@kleine-koenig.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add support for the general purpose clocks that are found on MSM8226.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Co-developed-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Link: https://lore.kernel.org/r/20230106114403.275865-3-matti.lehtimaki@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
