Commit Graph

43 Commits

Author SHA1 Message Date
Andrey Smirnov
a8ab3547c7 ARM: dts: imx7d: Specify viewport count for PCIE block
i.MX7D comes with 4 viewports, so configure PCIE node accordingly so
that the driver won't assume we only have 2.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Richard Zhu <hongxing.zhu@nxp.com>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-04-03 16:39:56 +07:00
Trent Piepho
27f7717e23 ARM: dts: imx7d: Add node for PCIe PHY
This adds the PHY as a new node. The PCI-e controller node gains a
phandle property that points to it.

There isn't yet any code in the kernel that uses this device's
registers, but it will be added for a PCIe PLL erratum workaround.

Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2019-02-12 19:17:34 +00:00
Fabio Estevam
d7f3894f0e ARM: dts: imx7: Correct mask for GIC PPI interrupts
The GIC_CPU_MASK_SIMPLE() macro should take as its argument the actual
number of CPU cores the interrupt controller is wired to.

i.MX7S contains a single Cortex-A7, hence the second interrupt specifier
cell for Private Peripheral Interrupts should use "GIC_CPU_MASK_SIMPLE(1)".

Likewise, i.MX7D contains two Cortex-A7 cores, so it should use
"GIC_CPU_MASK_SIMPLE(2)" instead.

Tested on a imx7s-warp.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10 10:03:04 +08:00
Linus Torvalds
93335e5911 ARM: SoC device tree updates for 4.20
There are close to 800 indivudal changesets in this branch again, which
 feels like a lot. There are particularly many changes for the NVIDIA
 Tegra platform this time, in fact more than it has seen in the two years
 since the v4.9 merge window. Aside from this, it's been fairly normal,
 with lots of changes going into Renesas R-CAR, NXP i.MX, Allwinner Sunxi,
 Samsung Exynos, and TI OMAP.
 
 Most of the changes are for adding new features into existing boards,
 for brevity I'm only mentioning completely new machines and SoCs here.
 For the first time I think we have (slightly) more new 64-bit hardware
 than 32-bit:
 
 Two boards get added for TI OMAP: Moxa UC-2101 is an industrial
 computer, see https://www.moxa.com/product/UC-2100.htm; GTA04A5
 is a minor variation of the motherboards of the GTA04 phone, see
 https://shop.goldelico.com/wiki.php?page=GTA04A5
 
 Clearfog is a nice little board for quad-core
 Marvell Armada 8040 network processor, see
 https://www.solid-run.com/marvell-armada-family/clearfog-gt-8k/
 
 Two additional server boards come with the Aspeed baseboard management
 controllers: Stardragon4800 is an arm64 reference platform made by HXT
 (based on Qualcomm's server chips), and TiogaPass is an Open Compute
 mainboard with x86 CPUs. Both use the ARM11 based AST2500 chips in
 the BMC.
 
 NXP i.MX usually sees a lot of new boards each release. This time there
 we only add one minor variant: ConnectCore 6UL SBC Pro uses the same
 SoM design as the ConnectCore 6UL SBC Express added later. However,
 there is a new chip, the i.MX6ULZ, which is an even smaller variant
 of the i.MX6ULL, with features removed. There is also support for the
 reference board design, the i.MX6ULZ 14x14 EVK.
 
 A new Raspberry Pi variant gets added, this one is the CM3 compute module
 based on bcm2837, it was launched in early 2017 but only now added to
 the kernel, both as 32-bit and as 64-bit files, as we tend to do for
 Raspberry Pi.
 
 On the Allwinner side, everything is again about cheap development
 boards, usually of the "Fruit Pi" variety. The new ones this time
 are:
 Orange Pi Zero Plus2: http://www.orangepi.org/OrangePiZeroPlus2/
 Orange Pi One Plus: http://www.orangepi.org/OrangePiOneplus/
 Pine64 LTS: https://www.pine64.org/?product=pine-a64-lts
 Banana Pi M2+ H5: http://www.banana-pi.org/m2plus.html
 The last one of these is now a 64-bit version of the earlier Banana
 Pi M2+ H3, with the same board layout.
 
 Similarly, for Rockchips, get get another variant of the 32-bit
 Asus Tinker board, the model 'S' based on rk3288, and three now
 boards based on the popular RK3399 chip:
 ROC-RK3399-PC: https://libre.computer/products/boards/roc-rk3399-pc/
 Rock960: https://www.96boards.org/product/rock960/
 RockPro64: https://www.pine64.org/?page_id=61454
 These are all quite powerful boards with lots of RAM and I/O, and
 the RK3399 is the same chip used in several Chromebooks.  Finally,
 we get support for the PX30 (aka rk3326) chip, which is based on the
 low-end 64-bit Cortex-A35 CPU core. So far, only the evaluation board
 is supported.
 
 One more Banana Pi is added with a Mediatek chip: Banana Pi R64 is based
 on the MT7622 WiFi router platform, and the first product I've seen with
 a 64-bit Mediatek chip in that market: http://www.banana-pi.org/r64.html
 
 For HiSilicon, we gain support for the Hi3670 SoC and HiKey 370
 development board, which are similar to the Hi3660 and Hikey 360
 respectively, but add support for an NPU.
 
 Amlogic gets initial support for the Meson-G12A chip (S905D2),
 another quad-core Cortex-A53 SoC, and its evaluation platform.
 On the 32-bit side, we gain support for an actual end-user product,
 the Endless Computers Endless Mini based on Meson8b (S805), see
 https://endlessos.com/computers/
 
 Qualcomm adds support for their MSM8998 SoC and evaluation platform. This
 chip is commonly known as the Snapdragon 835, and is used in high-end
 phones as well as low-end laptops.
 
 For Renesas, a very bare support for the r8a774a1 (RZ/G2M) is added,
 but no boards for this one. However, we do add boards for the previously
 added r8a77965 (R-Car M3-N): the M3NULCB Kingfisher and the M3NULCB
 Starter Kit Pro.
 
 While we have lots of DT changes for NVIDIA to update the existing files,
 the only board that gets added is the Toradex Colibri T20 on Colibri
 Evaluation Board for the old Tegra2.
 
 Synaptics add support for their AS370 SoC, which is part of the (formerly
 Marvell) Berlin line of set-top-box chips used e.g.  in the various Google
 Chromecast. Only the .dtsi gets added at this point, no actual machines.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJb1224AAoJEGCrR//JCVIn9uYP/jLMoGkVQRS5L9sRjOci1l5b
 EHl8veJ+uNJaTStp5XAZk90MoBcSdXtnISSEiR7a3qKJw1mYfgAWyPtQCttRFUCo
 rDp4GJpJ96TBg1tyt5Lop3V9eIYbCh9epf2foKTTdpRiX022AFk1031jvnh2Teuy
 fKA2VNeoyyOZqxh0ysJq7G8kWt8PTQTKXDebYPWEbsu0AFmqQ84lz7oGNdPk0GPm
 krtQIO6rh+sJR/8wWGYfnTYAIOk6jNrPhiyjEcyu+x2525rwKxJNKVY8P9PuNhrl
 hzqld1dPtb3gfdcxWxZUznHmVUGkVEIa1QNC6csSmLzuxqJJE0/J5u2P8lIfrhVI
 c5C8r3eaTxFM0s5uKhNhhewlJ6uiDhUQy13AG0JXteujP23BGObYstnV10pJrH75
 xq7uSUiU04v95MocPjodJ2I7dIlAoFCd6ELnsmD/mz743gY9AZ6DHaOBMMwIzK3H
 EQifF5E/4PWOjBx7fonumBm0LebPjWGmv4CNyCK5Q93ylK7U/kFDdjiNjNhyks5E
 CVQBFhA7sshKJQRDOiaofMxOfKJHeKGU2PR7yGRpT3YWQD/apIL/elG4qUNjLX46
 2Dwdgq8nDdbY2SzPwwy7ncTtyDRYcsFCtScT5slu1I1UxIhwEYJurzCKDM4jJNZb
 Cg2D7a+AlZ8N5Vsr1ldV
 =yaED
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree updates from Arnd Bergmann:
 "There are close to 800 indivudal changesets in this branch again,
  which feels like a lot. There are particularly many changes for the
  NVIDIA Tegra platform this time, in fact more than it has seen in the
  two years since the v4.9 merge window. Aside from this, it's been
  fairly normal, with lots of changes going into Renesas R-CAR, NXP
  i.MX, Allwinner Sunxi, Samsung Exynos, and TI OMAP.

  Most of the changes are for adding new features into existing boards,
  for brevity I'm only mentioning completely new machines and SoCs here.
  For the first time I think we have (slightly) more new 64-bit hardware
  than 32-bit:

  Two boards get added for TI OMAP: Moxa UC-2101 is an industrial
  computer, see https://www.moxa.com/product/UC-2100.htm; GTA04A5 is a
  minor variation of the motherboards of the GTA04 phone, see
  https://shop.goldelico.com/wiki.php?page=GTA04A5

  Clearfog is a nice little board for quad-core Marvell Armada 8040
  network processor, see
  https://www.solid-run.com/marvell-armada-family/clearfog-gt-8k/

  Two additional server boards come with the Aspeed baseboard management
  controllers: Stardragon4800 is an arm64 reference platform made by HXT
  (based on Qualcomm's server chips), and TiogaPass is an Open Compute
  mainboard with x86 CPUs. Both use the ARM11 based AST2500 chips in the
  BMC.

  NXP i.MX usually sees a lot of new boards each release. This time
  there we only add one minor variant: ConnectCore 6UL SBC Pro uses the
  same SoM design as the ConnectCore 6UL SBC Express added later.
  However, there is a new chip, the i.MX6ULZ, which is an even smaller
  variant of the i.MX6ULL, with features removed. There is also support
  for the reference board design, the i.MX6ULZ 14x14 EVK.

  A new Raspberry Pi variant gets added, this one is the CM3 compute
  module based on bcm2837, it was launched in early 2017 but only now
  added to the kernel, both as 32-bit and as 64-bit files, as we tend to
  do for Raspberry Pi.

  On the Allwinner side, everything is again about cheap development
  boards, usually of the "Fruit Pi" variety. The new ones this time are:
   - Orange Pi Zero Plus2: http://www.orangepi.org/OrangePiZeroPlus2/
   - Orange Pi One Plus: http://www.orangepi.org/OrangePiOneplus/
   - Pine64 LTS: https://www.pine64.org/?product=pine-a64-lts
   - Banana Pi M2+ H5: http://www.banana-pi.org/m2plus.html
  The last one of these is now a 64-bit version of the earlier Banana Pi
  M2+ H3, with the same board layout.

  Similarly, for Rockchips, get get another variant of the 32-bit Asus
  Tinker board, the model 'S' based on rk3288, and three now boards
  based on the popular RK3399 chip:
   - ROC-RK3399-PC: https://libre.computer/products/boards/roc-rk3399-pc/
   - Rock960: https://www.96boards.org/product/rock960/
   - RockPro64: https://www.pine64.org/?page_id=61454
  These are all quite powerful boards with lots of RAM and I/O, and the
  RK3399 is the same chip used in several Chromebooks. Finally, we get
  support for the PX30 (aka rk3326) chip, which is based on the low-end
  64-bit Cortex-A35 CPU core. So far, only the evaluation board is
  supported.

  One more Banana Pi is added with a Mediatek chip: Banana Pi R64 is
  based on the MT7622 WiFi router platform, and the first product I've
  seen with a 64-bit Mediatek chip in that market:
  http://www.banana-pi.org/r64.html

  For HiSilicon, we gain support for the Hi3670 SoC and HiKey 370
  development board, which are similar to the Hi3660 and Hikey 360
  respectively, but add support for an NPU.

  Amlogic gets initial support for the Meson-G12A chip (S905D2), another
  quad-core Cortex-A53 SoC, and its evaluation platform. On the 32-bit
  side, we gain support for an actual end-user product, the Endless
  Computers Endless Mini based on Meson8b (S805), see
  https://endlessos.com/computers/

  Qualcomm adds support for their MSM8998 SoC and evaluation platform.
  This chip is commonly known as the Snapdragon 835, and is used in
  high-end phones as well as low-end laptops.

  For Renesas, a very bare support for the r8a774a1 (RZ/G2M) is added,
  but no boards for this one. However, we do add boards for the
  previously added r8a77965 (R-Car M3-N): the M3NULCB Kingfisher and the
  M3NULCB Starter Kit Pro.

  While we have lots of DT changes for NVIDIA to update the existing
  files, the only board that gets added is the Toradex Colibri T20 on
  Colibri Evaluation Board for the old Tegra2.

  Synaptics add support for their AS370 SoC, which is part of the
  (formerly Marvell) Berlin line of set-top-box chips used e.g. in the
  various Google Chromecast. Only the .dtsi gets added at this point, no
  actual machines"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (721 commits)
  ARM: dts: socfgpa: remove ethernet aliases from dtsi
  arm64: dts: stratix10: add ethernet aliases
  dt-bindings: mediatek: Add bindig for MT7623 IOMMU and SMI
  dt-bindings: mediatek: Add JPEG Decoder binding for MT7623
  dt-bindings: iommu: mediatek: Add binding for MT7623
  dt-bindings: clock: mediatek: add support for MT7623
  ARM: dts: mvebu: armada-385-db-88f6820-amc: auto-detect nand ECC properites
  ARM: dts: da850-lego-ev3: slow down A/DC as much as possible
  ARM: dts: da850-evm: Enable tca6416 on baseboard
  arm64: dts: uniphier: Add USB2 PHY nodes
  arm64: dts: uniphier: Add USB3 controller nodes
  ARM: dts: uniphier: Add USB2 PHY nodes
  ARM: dts: uniphier: Add USB3 controller nodes
  arm64: dts: meson-axg: s400: disable emmc
  arm64: dts: meson-axg: s400: add missing emmc pwrseq
  arm64: dts: clearfog-gt-8k: add PCIe slot description
  ARM: dts: at91: sama5d4_xplained: even nand memory partitions
  ARM: dts: at91: sama5d3_xplained: even nand memory partitions
  ARM: dts: at91: at91sam9x5cm: even nand memory partitions
  ARM: dts: at91: sama5d2_ptc_ek: fix bootloader env offsets
  ...
2018-10-29 15:05:20 -07:00
Leonard Crestez
3aedf7e135 ARM: dts: imx7d: Add turnoff reset
This is required for the imx pci driver to send the PME_Turn_Off TLP.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
2018-10-05 09:56:37 +01:00
Suzuki K Poulose
f2e7398987 ARM: dts: imx7: Update coresight binding for hardware ports
Switch to the updated coresight bindings.

Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-26 10:21:47 +08:00
Anson Huang
6f4ec8842d ARM: dts: imx7s: enable cpuidle driver
Enable cpuidle for i.MX7S/D using generic ARM cpuidle
driver, below 2 idle states enabled:

1. ARM WFI;
2. SoC WAIT mode.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-03 12:30:43 +08:00
Leonard Crestez
538d6e9d59 Revert "ARM: dts: imx7d: Invert legacy PCI irq mapping"
This reverts commit 1c86c9dd82.

That commit followed the reference manual but unfortunately the imx7d
manual is incorrect.

Tested with ath9k pcie card and confirmed internally.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Acked-by: Lucas Stach <l.stach@pengutronix.de>
Fixes: 1c86c9dd82 ("ARM: dts: imx7d: Invert legacy PCI irq mapping")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-08-27 15:05:32 +08:00
Anson Huang
33a8d5a595 ARM: dts: imx7d: remove "operating-points" property for cpu1
Commit b97872d4eb ("ARM: dts: imx: Add missing OPP properties for CPUs")
added "operating-points" property for all CPUs, but i.MX7D already has
"operating-points-v2" property on both CPUs, so no need to add
"operating-points" property again, this patch removes it.

Fixes: b97872d4eb ("ARM: dts: imx: Add missing OPP properties for CPUs")
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-07-21 09:09:58 +08:00
Viresh Kumar
b97872d4eb ARM: dts: imx: Add missing OPP properties for CPUs
The OPP properties, like "operating-points", should either be present
for all the CPUs of a cluster or none. If these are present only for a
subset of CPUs of a cluster then things will start falling apart as soon
as the CPUs are brought online in a different order. For example, this
will happen because the operating system looks for such properties in
the CPU node it is trying to bring up, so that it can create an OPP
table.

Add such missing properties.

Fix other missing properties (like clocks, supply, clock latency) as
well to make it all work.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-07-03 20:33:46 +08:00
Anson Huang
f3d80deb08 ARM: dts: imx: add cooling-cells for cpufreq cooling device
Add #cooling-cells for i.MX6/7 SoCs for cpufreq cooling device usage.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Bastian Stender <bst@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-06-28 08:59:09 +08:00
Linus Torvalds
721afaa2ae ARM: Device-tree updates
As always, a large number of DT updates. Too many to enumerate them all,
 but at a glance:
 
 New SoCs introduced in this release:
 
  - Amlogic:
    + Meson 8M2 SoC, a.k.a. S812. A quad Cortex-A9 SoC used in some set
      top boxes and other products.
 
  - Mediatek:
    + MT7623A, which is a flavor of the MT7623 family with other on-chip
      ethernet options.
 
  - Qualcomm:
    + SDM845, a.k.a Snapdragon 845, an 4+4-core Kryo 385/845
      (Cortex-A75/A55 derivative) SoC that's one of the current high-end
      mobile SoCs.
 
      It's great to see mainline support for it. So far, you
      can't do much with it, since a lot of peripherals are not yet in the
      DTs but driver support for USB, GPU and other pieces are starting to
      trickle in. This might end up being a well-supported SoC upstream if
      the momentum keeps up.
 
  - Renesas:
    + R8A77990, a.k.a R-Car E3, a new automotive entertainment-targeted
      SoC. Currently only one Cortex-A53 CPU is enabled, we are eagerly
      awaiting more. So far, basic drivers such as serial, gpios, PMU and
      ethernet are enabled.
    + R8A77470, a.k.a. RZ/G1C, a new dual Cortex-A7 SoC with PowerVR
      GPU. Same here, basic set of drivers such as serial, gpios and ethernet
      enabled, and SMP support is also forthcoming.
 
  - STMicroelectronics:
    + STM32F469, very similar tih STM32F429 but with display support
 
 Enhancements to SoCs/platforms (DTS contents, some driver portions might
 not be in yet):
 
  - Allwinner sun8i (h3/a33/a83t) SMP, DVFS tweaks, misc
  - Amlogic Meson: I2C, UFS, TDM, GPIO external interrupts, MMC resets
  - Hisilicon hi3660: Thermal cooling, CPU frequency scaling, mailbox interfaces
  - Marvell Berlin2CD: SMP support, thermal sensors
  - Mediatek MT7623: Highspeed DMA, audio support
  - Qualcomm IPQ8074 PCIe support, MSM8996 UFS support
  - Renesas: Watchdog and PMU support across many platforms
  - Rockchip RK3399: USB3 OTG support
  - Samsung Exynos: Audio-over-HDMI on Odroid X/X2/U3
  - STMicro STM32: Lots of peripherals added to STM32MP175C
  - Uniphier: Ethernet support
 
 New boards:
 
  - Allwinner A20: Olimex A20-SOM-EVB-eMMC variant
  - Allwinner H2+: Libre Computer ALL-H3-CC (h2+ version)
  - Allwinner A33: Nintendo NES/SuperNES Classic Edition
  - Aspeed: S2600WF, Inventec Lanyang BMC, Portwell Neptune
  - Berlin2CD: Valve Steam Link
  - Broadcom BCM5301X: Luxul XAP-1610 and XWR-3150 V1
  - Broadcom: Raspberry Pi 3 B+
  - Mediatek MT7623N and MT7623A: reference boards
  - Meson 8M2: Tronsmart MXIII Plus
  - NXP i.MX: Engicam i.CoreM6, DHCOM iMX6 SOM, BTicino i.MX6DL Mamoj
  - Qualcomm MSM8974: Sony Xperia Z1 Compact support
  - Qualcomm SDM845: MTP development board
  - Renesas: Ebisu R8A77990 board
  - Renesas RZ/G1C: iwg23s: iWave G235-SDB
  - TI am335x: Pocketbeagle support
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAlsfBtUPHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx3wfYQAI1hlPhRx7H1zbc59zdlW6daY7y1+dXuqoCs
 K5Hxsurlsbnx9fjeGcBp/razL5YtdZmBYII8IBhKzhLKp/A0gqmX7W9pTNQj9/Sp
 SOIl8dci/yr0HUpgwc4IdVhJBdpplv48GK3q8opSocI/J9dnD873NHLlvTpCB+Jy
 GCD9tB56JnOfTO+n0Yg+tyuig1jIQCc52Iwnmxv2vYPbsHUaEmqz1Z+wBe0BaDk+
 eVsohNQI/2xxRzv8PE13H/ojcZ532rF45aw6ypRwCvg1MzCYXSdKLJlIWx8Ci581
 YmRPlCOWai+AxSATgJhIR9n9dxn6hqxEgVyu7AOxPVa0O4DKB3oy8PPo5wlOCKcU
 J1n5zJwnULWw4eVa1ag/cEMbz95QMC1F9MmyiLUfz3esHwyD/Gl3ks9v1gwn9XYp
 xsI+oGnMy/Uz4oZ1/XM5CO5UUDXyixVD3pYEF8wLaYX2JY8zETI5qfvNL0bwZX3P
 lLFCI7Xdwsk3+HCp7aHs4KkWHLVGq65SxrXKTIpU+vEq+0RYiV/cWP9Swa/RNrMH
 gB00oZ2TBRuIr/KxsCKyCkKApocW4J4WtZ2sMY7QDXzW68lq8oIbefY+6Abgk4/7
 6J7D5n0gmTB38wrzZCY5UF0eQrLjPwnxuLywEll5oLFbNTr/7Aruk2kFYEMGjM9E
 QmXGoHXU
 =jLvk
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree updates from Olof Johansson:
 "As always, a large number of DT updates. Too many to enumerate them
  all, but at a glance:

  New SoCs introduced in this release:

   - Amlogic:
      + Meson 8M2 SoC, a.k.a. S812. A quad Cortex-A9 SoC used in some
        set top boxes and other products.

   - Mediatek:
      + MT7623A, which is a flavor of the MT7623 family with other
        on-chip ethernet options.

   - Qualcomm:
      + SDM845, a.k.a Snapdragon 845, an 4+4-core Kryo 385/845
        (Cortex-A75/A55 derivative) SoC that's one of the current
        high-end mobile SoCs.

        It's great to see mainline support for it. So far, you can't do
        much with it, since a lot of peripherals are not yet in the DTs
        but driver support for USB, GPU and other pieces are starting to
        trickle in. This might end up being a well-supported SoC
        upstream if the momentum keeps up.

   - Renesas:
      + R8A77990, a.k.a R-Car E3, a new automotive
        entertainment-targeted SoC. Currently only one Cortex-A53 CPU is
        enabled, we are eagerly awaiting more. So far, basic drivers
        such as serial, gpios, PMU and ethernet are enabled.
      + R8A77470, a.k.a. RZ/G1C, a new dual Cortex-A7 SoC with PowerVR
        GPU. Same here, basic set of drivers such as serial, gpios and
        ethernet enabled, and SMP support is also forthcoming.

   - STMicroelectronics:
      + STM32F469, very similar tih STM32F429 but with display support

  Enhancements to SoCs/platforms (DTS contents, some driver portions
  might not be in yet):
   - Allwinner sun8i (h3/a33/a83t) SMP, DVFS tweaks, misc
   - Amlogic Meson: I2C, UFS, TDM, GPIO external interrupts, MMC resets
   - Hisilicon hi3660: Thermal cooling, CPU frequency scaling, mailbox interfaces
   - Marvell Berlin2CD: SMP support, thermal sensors
   - Mediatek MT7623: Highspeed DMA, audio support
   - Qualcomm IPQ8074 PCIe support, MSM8996 UFS support
   - Renesas: Watchdog and PMU support across many platforms
   - Rockchip RK3399: USB3 OTG support
   - Samsung Exynos: Audio-over-HDMI on Odroid X/X2/U3
   - STMicro STM32: Lots of peripherals added to STM32MP175C
   - Uniphier: Ethernet support

  New boards:
   - Allwinner A20: Olimex A20-SOM-EVB-eMMC variant
   - Allwinner H2+: Libre Computer ALL-H3-CC (h2+ version)
   - Allwinner A33: Nintendo NES/SuperNES Classic Edition
   - Aspeed: S2600WF, Inventec Lanyang BMC, Portwell Neptune
   - Berlin2CD: Valve Steam Link
   - Broadcom BCM5301X: Luxul XAP-1610 and XWR-3150 V1
   - Broadcom: Raspberry Pi 3 B+
   - Mediatek MT7623N and MT7623A: reference boards
   - Meson 8M2: Tronsmart MXIII Plus
   - NXP i.MX: Engicam i.CoreM6, DHCOM iMX6 SOM, BTicino i.MX6DL Mamoj
   - Qualcomm MSM8974: Sony Xperia Z1 Compact support
   - Qualcomm SDM845: MTP development board
   - Renesas: Ebisu R8A77990 board
   - Renesas RZ/G1C: iwg23s: iWave G235-SDB
   - TI am335x: Pocketbeagle support"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (448 commits)
  ARM: dts: aspeed: Fix hwrng register address
  arm64: dts: sprd: whale2: Add the rtc enable clock for watchdog
  arm64: dts: sprd: Add GPIO and GPIO keys device nodes
  arm64: dts: sprd: fix typo in 'remote-endpoint'
  arm64: dts: apq8096-db820c: Removed bt-en-1-8v regulator
  arm64: dts: fix regulator property name for wlan pcie endpoint
  arm64: dts: qcom: msm8996: Use UFS_GDSC for UFS
  ARM: dts: pxa3xx: fix MMC clocks
  ARM: pxa: dts: add pin definitions for extended GPIOs
  ARM: pxa: dts: add gpio-ranges to gpio controller
  ARM: dts: ipq8074: Enable few peripherals for hk01 board
  ARM: dts: ipq8074: Add pcie nodes
  ARM: dts: ipq8074: Add peripheral nodes
  ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c2 board file
  ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c1 board file
  ARM: dts: ipq4019: Add ipq4019-ap.dk07.1 common data
  ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk04.1-c3 board file
  ARM: dts: ipq4019: Add ipq4019-ap.dk04.1-c1 board file
  ARM: dts: ipq4019: Add ipq4019-ap.dk04.dtsi
  ARM: dts: ipq4019: Change the max opp frequency
  ...
2018-06-11 17:57:38 -07:00
Anson Huang
64f929d824 ARM: dts: imx7: correct enet ipg clock
ENET "ipg" clock should be IMX7D_ENETx_IPG_ROOT_CLK
rather than IMX7D_ENET_AXI_ROOT_CLK which is for ENET bus
clock.

Based on Andy Duan's patch from the NXP kernel tree.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-06-01 12:15:39 -07:00
Anson Huang
bce48c92a6 ARM: dts: imx7d: use operating-points-v2 for cpu
This patch uses "operating-points-v2" instead of
"operating-points" to be more fit with cpufreq-dt
driver.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-05-20 20:47:58 +08:00
Fabio Estevam
241f76b24b ARM: dts: imx: Switch to SPDX identifier
Adopt the SPDX license identifier headers to ease license compliance
management.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-05-14 22:08:05 +08:00
Fabio Estevam
2290ad1139 ARM: dts: imx7d: Fix pcie node warnings
Fix the unit address notation and pass bus-range property in order to
fix the following build warnings with W=1:

arch/arm/boot/dts/imx7d-cl-som-imx7.dtb: Warning (pci_bridge): Node /soc/aips-bus@30800000/pcie@0x33800000 missing bus-range for PCI bridge
arch/arm/boot/dts/imx7d-cl-som-imx7.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge'
arch/arm/boot/dts/imx7d-cl-som-imx7.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge'
arch/arm/boot/dts/imx7d-cl-som-imx7.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge'
arch/arm/boot/dts/imx7d-cl-som-imx7.dtb: Warning (simple_bus_reg): Node /soc/aips-bus@30800000/pcie@0x33800000 simple-bus unit address format error, expected "33800000"

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26 16:15:44 +08:00
Fabio Estevam
dd55cb40a8 ARM: dts: imx7: Move nodes which have no reg property out of bus
Move usbphynop1, usbphynop2, usbhypnop3, replicator and timer and nodes
from soc node to root node.

The nodes that have been moved do not have any register properties and thus
shouldn't be placed on the bus.

This fixes the following build warnings with W=1:

arch/arm/boot/dts/imx7d-cl-som-imx7.dtb: Warning (simple_bus_reg): Node /soc/replicator missing or empty reg/ranges property
arch/arm/boot/dts/imx7d-cl-som-imx7.dtb: Warning (simple_bus_reg): Node /soc/timer missing or empty reg/ranges property
arch/arm/boot/dts/imx7d-cl-som-imx7.dtb: Warning (simple_bus_reg): Node /soc/aips-bus@30800000/usbphynop1 missing or empty reg/ranges property
arch/arm/boot/dts/imx7d-cl-som-imx7.dtb: Warning (simple_bus_reg): Node /soc/aips-bus@30800000/usbphynop3 missing or empty reg/ranges property
arch/arm/boot/dts/imx7d-cl-som-imx7.dtb: Warning (simple_bus_reg): Node /soc/aips-bus@30800000/usbphynop2 missing or empty reg/ranges property

Based on a patch from Simon Horman for r8a7795.dtsi.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26 16:15:44 +08:00
Rob Herring
915fbe59cb ARM: dts: imx: Add missing #phy-cells to usb-nop-xceiv
"usb-nop-xceiv" is using the phy binding, but is missing #phy-cells
property. This is probably because the binding was the precursor to the phy
binding.

Fixes the following warning in i.MX dts files:

Warning (phys_property): Missing property '#phy-cells' in node ...

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26 16:15:44 +08:00
Troy Kisky
e94a2309b0 ARM: dts: imx: name the interrupts for the fec ethernet driver
imx7s/imx7d has the ptp interrupt newly added as well.

For imx7, "int0" is the interrupt for queue 0 and ENET_MII
"int1" is for queue 1
"int2" is for queue 2

For imx6sx, "int0" handles all 3 queues and ENET_MII

And of course, the "pps" interrupt is for the PTP_CLOCK_PPS interrupts
This will help document what each interrupt does.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26 16:15:44 +08:00
Andrey Smirnov
1c86c9dd82 ARM: dts: imx7d: Invert legacy PCI irq mapping
According to i.MX7D reference manual (Rev. 0.1, table 7-1, page 1221)
legacy PCI interrupt mapping is as follows:

 - PCIE INT A is IRQ 122
 - PCIE INT B is IRQ 123
 - PCIE INT C is IRQ 124
 - PCIE INT D is IRQ 125

Invert the mapping information in corresponding DT node to reflect
that.

Cc: yurovsky@gmail.com
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Fixes: a816d5750e ("ARM: dts: imx7d: Add node for PCIe controller")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-10-14 23:32:51 +08:00
Andrey Smirnov
a816d5750e ARM: dts: imx7d: Add node for PCIe controller
Cc: yurovsky@gmail.com
Cc: Dong Aisheng <aisheng.dong@nxp.com>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-05-21 09:53:43 +08:00
Stefan Agner
1c4e2a11ba ARM: dts: imx7d: add clock-frequency to CPU nodes
Add clock-frequency property to CPU nodes. Avoids warnings like
"/cpus/cpu@0 missing clock-frequency property".

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-08-17 22:34:33 +08:00
Stefan Agner
f5bd51b60f ARM: dts: imx7d: move CPU operating points to imx7d.dtsi
Only i.MX 7Dual SoC supports CPU frequencies of up to 1GHz. The i.MX
7Solo can run with up to 800MHz and does so without making use of DVFS
usually. While the device tree clearly specified a too fast operating
point for i.MX 7Solo, the kernel did not used it in practise so far
because the CPUfreq driver does not get loaded on i.MX 7Solo devices
(since the fsl,imx7s compatible string is not in the list of devices
making use of the cpufreq-dt driver...).

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-08-17 22:34:32 +08:00
Stefan Agner
974a3abcff ARM: dts: imx7d: move ARM platform peripherals inside soc node
Since we have a SoC level node we should make use of it and have
all nodes which are within the SoC, inside that node. This also
saves an extra interrupt-parent properties. While at it, also
order the Coresight nodes according to register addresses.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-08-15 19:46:24 +08:00
Stefan Agner
a67970a226 ARM: dts: imx7d: recreate imx7d.dtsi with i.MX 7Dual specifics
The i.MX 7Solo implements a subset of features available on
i.MX 7Dual. Recreate imx7s.dtsi as the base device tree for
i.MX 7Dual boards. The i.MX 7Dual's additional features over
i.MX 7Solo are:
- Second Cortex-A7 core
- Second Gigabit Ethernet controller
- EPD (Electronc Paper Display, not yet part of the device tree)
- PCIe (not yet part of the device tree)
- Additional USB2.0 OTG controller

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-28 10:45:30 +08:00
Stefan Agner
3ef79ca6bd ARM: dts: imx7d: use imx7s.dtsi as base device tree
The i.MX 7 series currently consists of two SoCs: i.MX 7Solo and
7Dual. The former has a subset of features of the latter, hence
use imx7s.dtsi as the new base device tree. To keep diffstat nice,
just move imx7d.dtsi to imx7s.dtsi temporarily and recreate
imx7d.dtsi in a second commit.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-28 10:45:23 +08:00
Diego Dorta
b754af313f ARM: dts: imx7d: Add SPI support
Add ecspi nodes and aliases.

Signed-off-by: Diego Dorta <diego.dorta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-28 09:59:03 +08:00
Fabio Estevam
298701ec04 ARM: dts: imx: Remove unneeded unit-addresses
Building with W=1 option leads to several warnings like:

Warning (unit_address_vs_reg): Node /soc/aips-bus@02000000/anatop@020c8000/regulator-1p1@110 has a unit name, but no reg property

Fix them by removing the unneeded unit-addresses.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-06 16:17:16 +08:00
Gary Bisson
c147401d45 ARM: dts: imx7d: add flexcan support
Add the device nodes for the i.MX7 FlexCAN buses.

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-13 17:42:01 +08:00
Gary Bisson
e8ed73f691 ARM: dts: imx7d: add lcdif support
Add the device node for the i.MX7 eLCDIF interface.

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-13 17:42:00 +08:00
Frank Li
ecea9fec0f ARM: dts: imx7d: add arch timer
Since uboot v2016.01-rc2, which supported basic psci for i.mx7d.
So imx7d's second core can be enabled by psci.

Without arch timer, every timer event will be boardcasted to each core.
arch timer has local timer irq for each core.

Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-02-29 16:14:31 +08:00
Haibo Chen
a3d19f2179 ARM: dts: imx7d.dtsi: add ADC support
Add imx7d ADC support.

Signed-off-by: Haibo Chen <haibo.chen@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22 20:43:38 +08:00
Bai Ping
698e2ac536 ARM: dts: imx: modify the clocks used by cpufreq driver
As on i.MX7D, we using a virtual arm clk for CPU frequency
scaling, so correct the clocks info used by the cpufreq driver.

Signed-off-by: Bai Ping <b51503@freescale.com>
Acked-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22 20:43:36 +08:00
Linus Torvalds
c0d6fe2f01 ARM: DT updates for v4.4
As usual, this is the massive branch we have for each release. Lots of
 various updates and additions of hardware descriptions on existing hardware,
 as well as the usual additions of new boards and SoCs.
 
 This is also the first release where we've started mixing 64- and 32-bit
 DT updates in one branch.
 
 (Specific details on what's actually here and new is pretty easy to tell
 from the diffstat, so there's little point in duplicating listing it here.)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWQT2WAAoJEIwa5zzehBx37tgQAIBe5eDJFXFihTlyOQ2plL3q
 vVH4OCzXIHELfM1J8CGZNah1wCQqNOts8RAmDCzxr+zSYuLOwJOEDZ6NKmErMxl0
 NTj3+BsqKO3NRym970ofPqU9JRLQmpZ8K7dzk8Nwj2+r1WZHFu/j6Jv44n/Ns0lw
 7+wxnG322lTm7SnvALCMD5lD4Y7VpThooWy5SdFtRoAetn+cLbVCJIeeQvO6Vxkp
 NooeJR0t2e8cpbAND5Jwu6eeWRcIbrvgjYDe0omhrIY05i9yNvIsC2HuQFGjF43z
 p2CnQvcKnhOXTZw3yse1Fx5igA7jqwVjjC/lVeDyxhusAtLpmuB6qbSaj7DpqkSQ
 nJxX1d49WKm68K+aknmee1kYRrvc4DE/kORI4IxXnsVNMu16ifTVLnxKgUhwzukb
 eZdTP6rsqgNozaYvh0k1vfSFd+CNSkBg+E9nrI3tU95yo3LOIhobVBCvBcWlmUvQ
 JdavRztqosChjIx3a9i1eCNKJtCg9p4m+gWjUqVVWsxBHe/3HojzjZnsBSynIQMA
 uGIVm0TKhNl1Svxl3oJo9257UCUK7+5PqJHK9IHrcWDULYx05JGSjuZcyvNS6Fo+
 u1DMf0ud4gXJYhecFBa7b3zRjk5YxptgCCTjeEEOTUJbbhZqDjGFZlNuFi6dmqD3
 ILJ2QMe/DGiPIlUmCfsx
 =qY1q
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM DT updates from Olof Johansson:
 "As usual, this is the massive branch we have for each release.  Lots
  of various updates and additions of hardware descriptions on existing
  hardware, as well as the usual additions of new boards and SoCs.

  This is also the first release where we've started mixing 64- and
  32-bit DT updates in one branch.

  (Specific details on what's actually here and new is pretty easy to
  tell from the diffstat, so there's little point in duplicating listing
  it here)"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (499 commits)
  ARM: dts: uniphier: add system-bus-controller nodes
  ARM64: juno: disable NOR flash node by default
  ARM: dts: uniphier: add outer cache controller nodes
  arm64: defconfig: Enable PCI generic host bridge by default
  arm64: Juno: Add support for the PCIe host bridge on Juno R1
  Documentation: of: Document the bindings used by Juno R1 PCIe host bridge
  ARM: dts: uniphier: add I2C aliases for ProXstream2 boards
  dts/Makefile: Add build support for LS2080a QDS & RDB board DTS
  dts/ls2080a: Add DTS support for LS2080a QDS & RDB boards
  dts/ls2080a: Update Simulator DTS to add support of various peripherals
  dts/ls2080a: Remove text about writing to Free Software Foundation
  dts/ls2080a: Update DTSI to add support of various peripherals
  doc: DTS: Update DWC3 binding to provide reference to generic bindings
  doc/bindings: Update GPIO devicetree binding documentation for LS2080A
  Documentation/dts: Move FSL board-specific bindings out of /powerpc
  Documentation: DT: Add entry for FSL LS2080A QDS and RDB boards
  arm64: Rename FSL LS2085A SoC support code to LS2080A
  arm64: Use generic Layerscape SoC family naming
  ARM: dts: uniphier: add ProXstream2 Vodka board support
  ARM: dts: uniphier: add ProXstream2 Gentil board support
  ...
2015-11-10 15:06:26 -08:00
Adrian Alonso
149c08e075 ARM: dts: imx: imx7d add iomuxc lpsr device node
Add device tree node to support iomuxc-lpsr controller, fsl,input-sel
phandle allows to get input select register base address which is
shared from main iomuxc controller.

Signed-off-by: Adrian Alonso <aalonso@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-10-19 22:45:18 +08:00
Fabio Estevam
60f5a22382 ARM: dts: imx7d: Add USB support
Add USB OTG and Host support.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-10-19 22:45:15 +08:00
Fugang Duan
0f629217cf ARM: dts: imx7d: add fec1 and fec2 support for i.MX7d soc
Add fec1 and fec2 nodes for i.MX7d soc.

Signed-off-by: Fugang Duan <B38611@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-10-19 22:45:15 +08:00
Fabio Estevam
208c9fe215 ARM: dts: imx7d: Add PWM support
Add the PWM1-4 nodes.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-10-19 22:45:13 +08:00
Fabio Estevam
178b2d09af ARM: dts: imx7d: Fix UART2 base address
The UART2 memory space starts at address 0x30890000 (UART2_URXD).

Fix it so that UART2 can be used.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Fixes: 9496734502 ("ARM: dts: add imx7d soc dtsi file")
Cc: <stable@vger.kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-09-30 09:48:21 +08:00
Frank Li
abb9f253cd ARM: dts: imx7d: enable snvs rtc, onoffkey and power off
Change SNVS rtc to syscon interface.
Enable onoff key and power off function.

Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-08-11 23:15:25 +08:00
Frank Li
3adab7c796 ARM: dts: imx7d: add cortex-a7 coresight component
Added etm, etb, funnel and replicator

usage example:

    echo 1 >/sys/bus/coresight/devices/30086000.etr/enable_sink
    echo 1 >/sys/bus/coresight/devices/3007c000.etm/enable_source

        coresight-tmc 30086000.etr: TMC enabled
        coresight-replicator replicator.1: REPLICATOR enabled
        coresight-tmc 30084000.tmc: TMC enabled
        coresight-funnel 30083000.funnel: FUNNEL inport 0 enabled
        coresight-funnel 30041000.funnel: FUNNEL inport 0 enabled
        coresight-etm3x 3007c000.etm: ETM tracing enabled

    etm enable here.
    trace data save at /dev/30086000.etr

    cat /dev/30086000.etr > trace.data

        coresight-tmc 30086000.etr: TMC read start
        coresight-tmc 30086000.etr: TMC read end

    use ptm2human(https://github.com/hwangcc23/ptm2human) to show trace data

    ptm2human -i trace.data

Signed-off-by: Frank Li <Frank.Li@freescale.com>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-08-11 23:15:12 +08:00
Frank Li
6f5f9bc9a8 ARM: dts: imx7d: add watch dog support
Enable watchdog support

Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-07-15 10:18:53 +08:00
Frank Li
9496734502 ARM: dts: add imx7d soc dtsi file
imx7d intergrates the unique display controller for EPD panel, pixel engines
and graphics engines to make it a ideal solution for EPD based devices such
as eReader, Signage, as well as any application rely on the bistable charactersic
of the EPD panel.

imx7d include two ARM Cortex A7 Core and one Cortex-M4 core.
Included Main Peripheral
 - DDR3\LP-DDR2
 - GPMI\BCH\APBH DMA(NAND flash support)
 - QSPI
 - WEIM Nor
 - LCDIF\MIPI DSI
 - CSI\MIPI CSI
 - EPDC
 - PCIe RC\EP
 - USB OTG\Host
 - CAN x2
 - I2C x4
 - SIMv2 x2
 - ENET -x2
 - uSDHC x3
 - eCSPI x1
 - PWM x4
 - OCOTP (fuse)
 - GPT x4
 - WDOG x4
 - Flex Timer x2

Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03 15:04:32 +08:00