Pass @opaque to kvm_arch_hardware_setup() and
kvm_arch_check_processor_compat() to allow architecture specific code to
reference @opaque without having to stash it away in a temporary global
variable. This will enable x86 to separate its vendor specific callback
ops, which are passed via @opaque, into "init" and "runtime" ops without
having to stash away the "init" ops.
No functional change intended.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Tested-by: Cornelia Huck <cohuck@redhat.com> #s390
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200321202603.19355-2-sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The vgic-state debugfs file could do with showing the pending state
of the HW-backed SGIs. Plug it into the low-level code.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20200304203330.4967-24-maz@kernel.org
Each time a Group-enable bit gets flipped, the state of these bits
needs to be forwarded to the hardware. This is a pretty heavy
handed operation, requiring all vcpus to reload their GICv4
configuration. It is thus implemented as a new request type.
These enable bits are programmed into the HW by setting the VGrp{0,1}En
fields of GICR_VPENDBASER when the vPEs are made resident again.
Of course, we only support Group-1 for now...
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20200304203330.4967-22-maz@kernel.org
The GICv4.1 architecture gives the hypervisor the option to let
the guest choose whether it wants the good old SGIs with an
active state, or the new, HW-based ones that do not have one.
For this, plumb the configuration of SGIs into the GICv3 MMIO
handling, present the GICD_TYPER2.nASSGIcap to the guest,
and handle the GICD_CTLR.nASSGIreq setting.
In order to be able to deal with the restore of a guest, also
apply the GICD_CTLR.nASSGIreq setting at first run so that we
can move the restored SGIs to the HW if that's what the guest
had selected in a previous life.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20200304203330.4967-21-maz@kernel.org
In order to let a guest buy in the new, active-less SGIs, we
need to be able to switch between the two modes.
Handle this by stopping all guest activity, transfer the state
from one mode to the other, and resume the guest. Nothing calls
this code so far, but a later patch will plug it into the MMIO
emulation.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20200304203330.4967-20-maz@kernel.org
Most of the GICv3 emulation code that deals with SGIs now has to be
aware of the v4.1 capabilities in order to benefit from it.
Add such support, keyed on the interrupt having the hw flag set and
being a SGI.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20200304203330.4967-19-maz@kernel.org
As GICv4.1 understands the life cycle of doorbells (instead of
just randomly firing them at the most inconvenient time), just
enable them at irq_request time, and be done with it.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20200304203330.4967-18-maz@kernel.org
In order to hide some of the differences between v4.0 and v4.1, move
the doorbell management out of the KVM code, and into the GICv4-specific
layer. This allows the calling code to ask for the doorbell when blocking,
and otherwise to leave the doorbell permanently disabled.
This matches the v4.1 code perfectly, and only results in a minor
refactoring of the v4.0 code.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20200304203330.4967-14-maz@kernel.org
Remove includes of asm/kvm_host.h from files that already include
linux/kvm_host.h to make it more obvious that there is no ordering issue
between the two headers. linux/kvm_host.h includes asm/kvm_host.h to
pick up architecture specific settings, and this will never change, i.e.
including asm/kvm_host.h after linux/kvm_host.h may seem problematic,
but in practice is simply redundant.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Refactor memslot handling to treat the number of used slots as the de
facto size of the memslot array, e.g. return NULL from id_to_memslot()
when an invalid index is provided instead of relying on npages==0 to
detect an invalid memslot. Rework the sorting and walking of memslots
in advance of dynamically sizing memslots to aid bisection and debug,
e.g. with luck, a bug in the refactoring will bisect here and/or hit a
WARN instead of randomly corrupting memory.
Alternatively, a global null/invalid memslot could be returned, i.e. so
callers of id_to_memslot() don't have to explicitly check for a NULL
memslot, but that approach runs the risk of introducing difficult-to-
debug issues, e.g. if the global null slot is modified. Constifying
the return from id_to_memslot() to combat such issues is possible, but
would require a massive refactoring of arch specific code and would
still be susceptible to casting shenanigans.
Add function comments to update_memslots() and search_memslots() to
explicitly (and loudly) state how memslots are sorted.
Opportunistically stuff @hva with a non-canonical value when deleting a
private memslot on x86 to detect bogus usage of the freed slot.
No functional change intended.
Tested-by: Christoffer Dall <christoffer.dall@arm.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the implementations of KVM_GET_DIRTY_LOG and KVM_CLEAR_DIRTY_LOG
for CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT into common KVM code.
The arch specific implemenations are extremely similar, differing
only in whether the dirty log needs to be sync'd from hardware (x86)
and how the TLBs are flushed. Add new arch hooks to handle sync
and TLB flush; the sync will also be used for non-generic dirty log
support in a future patch (s390).
The ulterior motive for providing a common implementation is to
eliminate the dependency between arch and common code with respect to
the memslot referenced by the dirty log, i.e. to make it obvious in the
code that the validity of the memslot is guaranteed, as a future patch
will rework memslot handling such that id_to_memslot() can return NULL.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that all callers of kvm_free_memslot() pass NULL for @dont, remove
the param from the top-level routine and all arch's implementations.
No functional change intended.
Tested-by: Christoffer Dall <christoffer.dall@arm.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop the "const" attribute from @old in kvm_arch_commit_memory_region()
to allow arch specific code to free arch specific resources in the old
memslot without having to cast away the attribute. Freeing resources in
kvm_arch_commit_memory_region() paves the way for simplifying
kvm_free_memslot() by eliminating the last usage of its @dont param.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove kvm_arch_create_memslot() now that all arch implementations are
effectively nops. Removing kvm_arch_create_memslot() eliminates the
possibility for arch specific code to allocate memory prior to setting
a memslot, which sets the stage for simplifying kvm_free_memslot().
Cc: Janosch Frank <frankja@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the physical timer structure when reading the physical counter
instead of using the virtual timer structure. Thankfully, nothing is
accessing this code path yet (at least not until we enable save/restore
of the physical counter). It doesn't hurt for this to be correct though.
Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de>
[maz: amended commit log]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Fixes: 84135d3d18 ("KVM: arm/arm64: consolidate arch timer trap handlers")
Link: https://lore.kernel.org/r/1584351546-5018-1-git-send-email-karahmed@amazon.de
- Fix compilation on 32bit
- Move VHE guest entry/exit into the VHE-specific entry code
- Make sure all functions called by the non-VHE HYP code is tagged as __always_inline
-----BEGIN PGP SIGNATURE-----
iQJDBAABCgAtFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAl5VsNMPHG1hekBrZXJu
ZWwub3JnAAoJECPQ0LrRPXpDLhUQAIsecO9IyYjy1J0Q5AxaKLL7NuKYlAaty2xX
uY6UkTfPNsEaHFXSGYXWPDxrmkgArp2wuy4WVQB59Om00+LE7h9kiz7+xKpcUy1G
UoHa5mzMlqoOeUIWO/oSU6LYHhYDnIpHTDco93YrscU4nNRevJZ/GVeuQeMblzuZ
Sg7cWc+0V43FXUt9Jw8BsNhXH/D0l0p3v86p7GZLcSfFAccO62YfOwC8J/znLPym
4S+O9RYQkCczvzFeQVYQwqImOAunaOb0OzERUbm8icOF6ekYGwywjrtlmAC/3q+q
1g/te1yfwQ8fpprWl4QSH0sQVdfAcxdDZqcWtN2LhNaEShZtNa5yKpsRGn1V0eAS
tIO8eexAKCXoASHrrwfSkizYjRAeDabmodBQmS50/isY9OdBE2tDel+BLrCjzBJ2
hABwEZ3Q78216EuoqsZqWaEUZ3ck0iSW3IcXglmHE4TC8Iq6dwskvOPjay+msHr9
dcHDCxFIN4jzv9QcpKN8LkxfmW0Us28bzap3OhKfrz0nv7b4n+j0q1xbKL1QnN/l
RcDPW0dQeXuX9vYMeYIUDQcV4IgTUkF6IPDCRW7KCApi98HfPTbrfQ97nir79zDp
pD8NXaNFr4PtxJoheYYia3sjZMt/fgfvP2dM32iOpsMu7W1FXdfQN7heNSc6MQmO
ciyhf/mj
=NpPo
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm fixes for 5.6, take #1
- Fix compilation on 32bit
- Move VHE guest entry/exit into the VHE-specific entry code
- Make sure all functions called by the non-VHE HYP code is tagged as __always_inline
With VHE, running a vCPU always requires the sequence:
1. kvm_arm_vhe_guest_enter();
2. kvm_vcpu_run_vhe();
3. kvm_arm_vhe_guest_exit()
... and as we invoke this from the shared arm/arm64 KVM code, 32-bit arm
has to provide stubs for all three functions.
To simplify the common code, and make it easier to make further
modifications to the arm64-specific portions in the near future, let's
fold kvm_arm_vhe_guest_enter() and kvm_arm_vhe_guest_exit() into
kvm_vcpu_run_vhe().
The 32-bit stubs for kvm_arm_vhe_guest_enter() and
kvm_arm_vhe_guest_exit() are removed, as they are no longer used. The
32-bit stub for kvm_vcpu_run_vhe() is left as-is.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200210114757.2889-1-mark.rutland@arm.com
Accessing a per-cpu variable only makes sense when preemption is
disabled (and the kernel does check this when the right debug options
are switched on).
For kvm_get_running_vcpu(), it is fine to return the value after
re-enabling preemption, as the preempt notifiers will make sure that
this is kept consistent across task migration (the comment above the
function hints at it, but lacks the crucial preemption management).
While we're at it, move the comment from the ARM code, which explains
why the whole thing works.
Fixes: 7495e22bb1 ("KVM: Move running VCPU from ARM to common code").
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reported-by: Zenghui Yu <yuzenghui@huawei.com>
Tested-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/318984f6-bc36-33a3-abc6-bf2295974b06@huawei.com
Message-id: <20200207163410.31276-1-maz@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fedora kernel builds on armv7hl began failing recently because
kvm_arm_exception_type and kvm_arm_exception_class were undeclared in
trace.h. Add the missing include.
Fixes: 0e20f5e255 ("KVM: arm/arm64: Cleanup MMIO handling")
Signed-off-by: Jeremy Cline <jcline@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200205134146.82678-1-jcline@redhat.com
According to the ARM ARM, registers CNT{P,V}_TVAL_EL0 have bits [63:32]
RES0 [1]. When reading the register, the value is truncated to the least
significant 32 bits [2], and on writes, TimerValue is treated as a signed
32-bit integer [1, 2].
When the guest behaves correctly and writes 32-bit values, treating TVAL
as an unsigned 64 bit register works as expected. However, things start
to break down when the guest writes larger values, because
(u64)0x1_ffff_ffff = 8589934591. but (s32)0x1_ffff_ffff = -1, and the
former will cause the timer interrupt to be asserted in the future, but
the latter will cause it to be asserted now. Let's treat TVAL as a
signed 32-bit register on writes, to match the behaviour described in
the architecture, and the behaviour experimentally exhibited by the
virtual timer on a non-vhe host.
[1] Arm DDI 0487E.a, section D13.8.18
[2] Arm DDI 0487E.a, section D11.2.4
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
[maz: replaced the read-side mask with lower_32_bits]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Fixes: 8fa7616248 ("KVM: arm/arm64: arch_timer: Fix CNTP_TVAL calculation")
Link: https://lore.kernel.org/r/20200127103652.2326-1-alexandru.elisei@arm.com
Let the code never use unsupported event counters. Change
kvm_pmu_handle_pmcr() to only reset supported counters and
kvm_pmu_vcpu_reset() to only stop supported counters.
Other actions are filtered on the supported counters in
kvm/sysregs.c
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200124142535.29386-5-eric.auger@redhat.com
At the moment a SW_INCR counter always overflows on 32-bit
boundary, independently on whether the n+1th counter is
programmed as CHAIN.
Check whether the SW_INCR counter is a 64b counter and if so,
implement the 64b logic.
Fixes: 80f393a23b ("KVM: arm/arm64: Support chained PMU counters")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200124142535.29386-4-eric.auger@redhat.com
At the moment we update the chain bitmap on type setting. This
does not take into account the enable state of the odd register.
Let's make sure a counter is never considered as chained if
the high counter is disabled.
We recompute the chain state on enable/disable and type changes.
Also let create_perf_event() use the chain bitmap and not use
kvm_pmu_idx_has_chain_evtype().
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200124142535.29386-3-eric.auger@redhat.com
The specification says PMSWINC increments PMEVCNTR<n>_EL1 by 1
if PMEVCNTR<n>_EL0 is enabled and configured to count SW_INCR.
For PMEVCNTR<n>_EL0 to be enabled, we need both PMCNTENSET to
be set for the corresponding event counter but we also need
the PMCR.E bit to be set.
Fixes: 7a0adc7064 ("arm64: KVM: Add access handler for PMSWINC register")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200124142535.29386-2-eric.auger@redhat.com
Add a helper, is_transparent_hugepage(), to explicitly check whether a
compound page is a THP and use it when populating KVM's secondary MMU.
The explicit check fixes a bug where a remapped compound page, e.g. for
an XDP Rx socket, is mapped into a KVM guest and is mistaken for a THP,
which results in KVM incorrectly creating a huge page in its secondary
MMU.
Fixes: 936a5fe6e6 ("thp: kvm mmu transparent hugepage support")
Reported-by: syzbot+c9d1fb51ac9d0d10c39d@syzkaller.appspotmail.com
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For ring-based dirty log tracking, it will be more efficient to account
writes during schedule-out or schedule-in to the currently running VCPU.
We would like to do it even if the write doesn't use the current VCPU's
address space, as is the case for cached writes (see commit 4e335d9e7d,
"Revert "KVM: Support vCPU-based gfn->hva cache"", 2017-05-02).
Therefore, add a mechanism to track the currently-loaded kvm_vcpu struct.
There is already something similar in KVM/ARM; one important difference
is that kvm_arch_vcpu_{load,put} have two callers in virt/kvm/kvm_main.c:
we have to update both the architecture-independent vcpu_{load,put} and
the preempt notifiers.
Another change made in the process is to allow using kvm_get_running_vcpu()
in preemptible code. This is allowed because preempt notifiers ensure
that the value does not change even after the VCPU thread is migrated.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove kvm_arch_vcpu_init() and kvm_arch_vcpu_uninit() now that all
arch specific implementations are nops.
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add an arm specific hook to free the arm64-only sve_state. Doing so
eliminates the last functional code from kvm_arch_vcpu_uninit() across
all architectures and paves the way for removing kvm_arch_vcpu_init()
and kvm_arch_vcpu_uninit() entirely.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fold init() into create() now that the two are called back-to-back by
common KVM code (kvm_vcpu_init() calls kvm_arch_vcpu_init() as its last
action, and kvm_vm_ioctl_create_vcpu() calls kvm_arch_vcpu_create()
immediately thereafter). This paves the way for removing
kvm_arch_vcpu_{un}init() entirely.
Note, there is no associated unwinding in kvm_arch_vcpu_uninit() that
needs to be relocated (to kvm_arch_vcpu_destroy()).
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that all architectures tightly couple vcpu allocation/free with the
mandatory calls to kvm_{un}init_vcpu(), move the sequences verbatim to
common KVM code.
Move both allocation and initialization in a single patch to eliminate
thrash in arch specific code. The bisection benefits of moving the two
pieces in separate patches is marginal at best, whereas the odds of
introducing a transient arch specific bug are non-zero.
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add kvm_vcpu_destroy() and wire up all architectures to call the common
function instead of their arch specific implementation. The common
destruction function will be used by future patches to move allocation
and initialization of vCPUs to common KVM code, i.e. to free resources
that are allocated by arch agnostic code.
No functional change intended.
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a pre-allocation arch hook to handle checks that are currently done
by arch specific code prior to allocating the vCPU object. This paves
the way for moving the allocation to common KVM code.
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the superfluous kvm_arch_vcpu_free() as it is no longer called
from commmon KVM code. Note, kvm_arch_vcpu_destroy() *is* called from
common code, i.e. choosing which function to whack is not completely
arbitrary.
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM's inject_abt64() injects an external-abort into an aarch64 guest.
The KVM_CAP_ARM_INJECT_EXT_DABT is intended to do exactly this, but
for an aarch32 guest inject_abt32() injects an implementation-defined
exception, 'Lockdown fault'.
Change this to external abort. For non-LPAE we now get the documented:
| Unhandled fault: external abort on non-linefetch (0x008) at 0x9c800f00
and for LPAE:
| Unhandled fault: synchronous external abort (0x210) at 0x9c800f00
Fixes: 74a64a9816 ("KVM: arm/arm64: Unify 32bit fault injection")
Reported-by: Beata Michalska <beata.michalska@linaro.org>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200121123356.203000-3-james.morse@arm.com
Beata reports that KVM_SET_VCPU_EVENTS doesn't inject the expected
exception to a non-LPAE aarch32 guest.
The host intends to inject DFSR.FS=0x14 "IMPLEMENTATION DEFINED fault
(Lockdown fault)", but the guest receives DFSR.FS=0x04 "Fault on
instruction cache maintenance". This fault is hooked by
do_translation_fault() since ARMv6, which goes on to silently 'handle'
the exception, and restart the faulting instruction.
It turns out, when TTBCR.EAE is clear DFSR is split, and FS[4] has
to shuffle up to DFSR[10].
As KVM only does this in one place, fix up the static values. We
now get the expected:
| Unhandled fault: lock abort (0x404) at 0x9c800f00
Fixes: 74a64a9816 ("KVM: arm/arm64: Unify 32bit fault injection")
Reported-by: Beata Michalska <beata.michalska@linaro.org>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200121123356.203000-2-james.morse@arm.com
kvm_test_age_hva() is called upon mmu_notifier_test_young(), but wrong
address range has been passed to handle_hva_to_gpa(). With the wrong
address range, no young bits will be checked in handle_hva_to_gpa().
It means zero is always returned from mmu_notifier_test_young().
This fixes the issue by passing correct address range to the underly
function handle_hva_to_gpa(), so that the hardware young (access) bit
will be visited.
Fixes: 35307b9a5f ("arm/arm64: KVM: Implement Stage-2 page aging")
Signed-off-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200121055659.19560-1-gshan@redhat.com
Our MMIO handling is a bit odd, in the sense that it uses an
intermediate per-vcpu structure to store the various decoded
information that describe the access.
But the same information is readily available in the HSR/ESR_EL2
field, and we actually use this field to populate the structure.
Let's simplify the whole thing by getting rid of the superfluous
structure and save a (tiny) bit of space in the vcpu structure.
[32bit fix courtesy of Olof Johansson <olof@lixom.net>]
Signed-off-by: Marc Zyngier <maz@kernel.org>
kvm_vgic_register_mmio_region() was introduced in commit 4493b1c486
("KVM: arm/arm64: vgic-new: Add MMIO handling framework") but never
used, and even never implemented. Remove it to avoid confusing readers.
Reported-by: Haibin Wang <wanghaibin.wang@huawei.com>
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200119090604.398-1-yuzenghui@huawei.com
Discard is supposed to fail if the collection is not mapped to any
target redistributor. We currently check if the collection is mapped
by "ite->collection" but this is incomplete (e.g., mapping a LPI to
an unmapped collection also results in a non NULL ite->collection).
What actually needs to be checked is its_is_collection_mapped(), let's
turn to it.
Also take this chance to remove an extra blank line.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20200114112212.1411-1-yuzenghui@huawei.com
Confusingly, there are three SPSR layouts that a kernel may need to deal
with:
(1) An AArch64 SPSR_ELx view of an AArch64 pstate
(2) An AArch64 SPSR_ELx view of an AArch32 pstate
(3) An AArch32 SPSR_* view of an AArch32 pstate
When the KVM AArch32 support code deals with SPSR_{EL2,HYP}, it's either
dealing with #2 or #3 consistently. On arm64 the PSR_AA32_* definitions
match the AArch64 SPSR_ELx view, and on arm the PSR_AA32_* definitions
match the AArch32 SPSR_* view.
However, when we inject an exception into an AArch32 guest, we have to
synthesize the AArch32 SPSR_* that the guest will see. Thus, an AArch64
host needs to synthesize layout #3 from layout #2.
This patch adds a new host_spsr_to_spsr32() helper for this, and makes
use of it in the KVM AArch32 support code. For arm64 we need to shuffle
the DIT bit around, and remove the SS bit, while for arm we can use the
value as-is.
I've open-coded the bit manipulation for now to avoid having to rework
the existing PSR_* definitions into PSR64_AA32_* and PSR32_AA32_*
definitions. I hope to perform a more thorough refactoring in future so
that we can handle pstate view manipulation more consistently across the
kernel tree.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200108134324.46500-4-mark.rutland@arm.com
When KVM injects an exception into a guest, it generates the CPSR value
from scratch, configuring CPSR.{M,A,I,T,E}, and setting all other
bits to zero.
This isn't correct, as the architecture specifies that some CPSR bits
are (conditionally) cleared or set upon an exception, and others are
unchanged from the original context.
This patch adds logic to match the architectural behaviour. To make this
simple to follow/audit/extend, documentation references are provided,
and bits are configured in order of their layout in SPSR_EL2. This
layout can be seen in the diagram on ARM DDI 0487E.a page C5-426.
Note that this code is used by both arm and arm64, and is intended to
fuction with the SPSR_EL2 and SPSR_HYP layouts.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200108134324.46500-3-mark.rutland@arm.com
When we check for a poisoned page, we use the VMA to tell userspace
about the looming disaster. But we pass a pointer to this VMA
after having released the mmap_sem, which isn't a good idea.
Instead, stash the shift value that goes with this pfn while
we are holding the mmap_sem.
Reported-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Link: https://lore.kernel.org/r/20191211165651.7889-3-maz@kernel.org
Link: https://lore.kernel.org/r/20191217123809.197392-1-james.morse@arm.com
It doesn't needs to call hyp_cpu_pm_exit() in init_hyp_mode() when some
error occurs. hyp_cpu_pm_exit() only needs to be called in
kvm_arch_init() if init_subsystems() fails. So move hyp_cpu_pm_exit()
out from teardown_hyp_mode() and call it directly in kvm_arch_init().
Signed-off-by: Shannon Zhao <shannon.zhao@linux.alibaba.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/1575272531-3204-1-git-send-email-shannon.zhao@linux.alibaba.com
Although guest will hardly read and use the PTZ (Pending Table Zero)
bit in GICR_PENDBASER, let us emulate the architecture strictly.
As per IHI 0069E 9.11.30, PTZ field is WO, and reads as 0.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20191220111833.1422-1-yuzenghui@huawei.com
Saving/restoring an unmapped collection is a valid scenario. For
example this happens if a MAPTI command was sent, featuring an
unmapped collection. At the moment the CTE fails to be restored.
Only compare against the number of online vcpus if the rdist
base is set.
Fixes: ea1ad53e1e ("KVM: arm64: vgic-its: Collection table save/restore")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20191213094237.19627-1-eric.auger@redhat.com
On AArch64 you can do a sign-extended load to either a 32-bit or 64-bit
register, and we should only sign extend the register up to the width of
the register as specified in the operation (by using the 32-bit Wn or
64-bit Xn register specifier).
As it turns out, the architecture provides this decoding information in
the SF ("Sixty-Four" -- how cute...) bit.
Let's take advantage of this with the usual 32-bit/64-bit header file
dance and do the right thing on AArch64 hosts.
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191212195055.5541-1-christoffer.dall@arm.com
