korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-15 16:24:13 +08:00
Code Issues Packages Projects Releases Wiki Activity
1,280,107 Commits 112 Branches 5,274 Tags 4.8 GiB
4adcaf969d
Commit Graph

680 Commits

Author SHA1 Message Date
Huacai Chen
eb36e520f4 LoongArch: Fix GMAC's phy-mode definitions in dts 
The GMAC of Loongson chips cannot insert the correct 1.5-2ns delay. So
we need the PHY to insert internal delays for both transmit and receive
data lines from/to the PHY device. Fix this by changing the "phy-mode"
from "rgmii" to "rgmii-id" in dts.

Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
 2024-06-03 15:45:53 +08:00
Jiaxun Yang
1098efd299 LoongArch: Override higher address bits in JUMP_VIRT_ADDR 
In JUMP_VIRT_ADDR we are performing an or calculation on address value
directly from pcaddi.

This will only work if we are currently running from direct 1:1 mapping
addresses or firmware's DMW is configured exactly same as kernel. Still,
we should not rely on such assumption.

Fix by overriding higher bits in address comes from pcaddi, so we can
get rid of or operator.

Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
 2024-06-03 15:45:53 +08:00
Jiaxun Yang
beb2800074 LoongArch: Fix entry point in kernel image header 
Currently kernel entry in head.S is in DMW address range, firmware is
instructed to jump to this address after loading the kernel image.

However kernel should not make any assumption on firmware's DMW
setting, thus the entry point should be a physical address falls into
direct translation region.

Fix by converting entry address to physical and amend entry calculation
logic in libstub accordingly.

BTW, use ABSOLUTE() to calculate variables to make Clang/LLVM happy.

Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
 2024-06-03 15:45:53 +08:00
Jiaxun Yang
3de9c42d02 LoongArch: Add all CPUs enabled by fdt to NUMA node 0 
NUMA enabled kernel on FDT based machine fails to boot because CPUs
are all in NUMA_NO_NODE and mm subsystem won't accept that.

Fix by adding them to default NUMA node at FDT parsing phase and move
numa_add_cpu(0) to a later point.

Cc: stable@vger.kernel.org
Fixes: 88d4d957ed ("LoongArch: Add FDT booting support from efi system table")
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
 2024-06-03 15:45:53 +08:00
Jiaxun Yang
b56f67a6c7 LoongArch: Fix built-in DTB detection 
fdt_check_header(__dtb_start) will always success because kernel
provides a dummy dtb, and by coincidence __dtb_start clashed with
entry of this dummy dtb. The consequence is fdt passed from firmware
will never be taken.

Fix by trying to utilise __dtb_start only when CONFIG_BUILTIN_DTB is
enabled.

Cc: stable@vger.kernel.org
Fixes: 7b937cc243 ("of: Create of_root if no dtb provided by firmware")
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
 2024-06-03 15:45:53 +08:00
Tiezhu Yang
6c3ca6654a LoongArch: Remove CONFIG_ACPI_TABLE_UPGRADE in platform_init() 
Both acpi_table_upgrade() and acpi_boot_table_init() are defined as
empty functions under !CONFIG_ACPI_TABLE_UPGRADE and !CONFIG_ACPI in
include/linux/acpi.h, there are no implicit declaration errors with
various configs.

  #ifdef CONFIG_ACPI_TABLE_UPGRADE
  void acpi_table_upgrade(void);
  #else
  static inline void acpi_table_upgrade(void) { }
  #endif

  #ifdef	CONFIG_ACPI
  ...
  void acpi_boot_table_init (void);
  ...
  #else	/* !CONFIG_ACPI */
  ...
  static inline void acpi_boot_table_init(void)
  {
  }
  ...
  #endif	/* !CONFIG_ACPI */

As Huacai suggested, CONFIG_ACPI_TABLE_UPGRADE is ugly and not necessary
here, just remove it. At the same time, just keep CONFIG_ACPI to prevent
potential build errors in future, and give a signal to indicate the code
is ACPI-specific. For the same reason, we also put acpi_table_upgrade()
under CONFIG_ACPI.

Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
 2024-06-03 15:45:53 +08:00
Linus Torvalds
c760b3725e - A series ("kbuild: enable more warnings by default") from Arnd 
Bergmann which enables a number of additional build-time warnings.  We
   fixed all the fallout which we could find, there may still be a few
   stragglers.
 
 - Samuel Holland has developed the series "Unified cross-architecture
   kernel-mode FPU API".  This does a lot of consolidation of
   per-architecture kernel-mode FPU usage and enables the use of newer AMD
   GPUs on RISC-V.
 
 - Tao Su has fixed some selftests build warnings in the series
   "Selftests: Fix compilation warnings due to missing _GNU_SOURCE
   definition".
 
 - This pull also includes a nilfs2 fixup from Ryusuke Konishi.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZk6OSAAKCRDdBJ7gKXxA
 jpTGAP9hQaZ+g7CO38hKQAtEI8rwcZJtvUAP84pZEGMjYMGLxQD/S8z1o7UHx61j
 DUbnunbOkU/UcPx3Fs/gp4KcJARMEgs=
 =EPi9
 -----END PGP SIGNATURE-----

Merge tag 'mm-nonmm-stable-2024-05-22-17-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull more non-mm updates from Andrew Morton:

 - A series ("kbuild: enable more warnings by default") from Arnd
   Bergmann which enables a number of additional build-time warnings. We
   fixed all the fallout which we could find, there may still be a few
   stragglers.

 - Samuel Holland has developed the series "Unified cross-architecture
   kernel-mode FPU API". This does a lot of consolidation of
   per-architecture kernel-mode FPU usage and enables the use of newer
   AMD GPUs on RISC-V.

 - Tao Su has fixed some selftests build warnings in the series
   "Selftests: Fix compilation warnings due to missing _GNU_SOURCE
   definition".

 - This pull also includes a nilfs2 fixup from Ryusuke Konishi.

* tag 'mm-nonmm-stable-2024-05-22-17-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (23 commits)
  nilfs2: make block erasure safe in nilfs_finish_roll_forward()
  selftests/harness: use 1024 in place of LINE_MAX
  Revert "selftests/harness: remove use of LINE_MAX"
  selftests/fpu: allow building on other architectures
  selftests/fpu: move FP code to a separate translation unit
  drm/amd/display: use ARCH_HAS_KERNEL_FPU_SUPPORT
  drm/amd/display: only use hard-float, not altivec on powerpc
  riscv: add support for kernel-mode FPU
  x86: implement ARCH_HAS_KERNEL_FPU_SUPPORT
  powerpc: implement ARCH_HAS_KERNEL_FPU_SUPPORT
  LoongArch: implement ARCH_HAS_KERNEL_FPU_SUPPORT
  lib/raid6: use CC_FLAGS_FPU for NEON CFLAGS
  arm64: crypto: use CC_FLAGS_FPU for NEON CFLAGS
  arm64: implement ARCH_HAS_KERNEL_FPU_SUPPORT
  ARM: crypto: use CC_FLAGS_FPU for NEON CFLAGS
  ARM: implement ARCH_HAS_KERNEL_FPU_SUPPORT
  arch: add ARCH_HAS_KERNEL_FPU_SUPPORT
  x86/fpu: fix asm/fpu/types.h include guard
  kbuild: enable -Wcast-function-type-strict unconditionally
  kbuild: enable -Wformat-truncation on clang
  ...
 2024-05-22 18:59:29 -07:00
Linus Torvalds
4f05e82003 LoongArch changes for v6.10 
1, Select some options in Kconfig;
 2, Give a chance to build with !CONFIG_SMP;
 3, Switch to use built-in rustc target;
 4, Add new supported device nodes to dts;
 5, Some bug fixes and other small changes;
 6, Update the default config file.
 -----BEGIN PGP SIGNATURE-----
 
 iQJKBAABCAA0FiEEzOlt8mkP+tbeiYy5AoYrw/LiJnoFAmZKCycWHGNoZW5odWFj
 YWlAa2VybmVsLm9yZwAKCRAChivD8uImeoXWD/9pFhbbJj49T1xiwc2j/XgQL8HI
 s88/h4z5AXEbHFO8XIG1Cpw/Z3a1DsCiWBsOkCogagILzYuN0r7UqcrI02ZoeY6N
 fbuDatB3i+hJWCBzcl1HPkFy/9av4j4EktZs0+X/wVgKkd0aIh78qs8+1RwKhshf
 FoOv+cMu7zFS8Jrt+w16diNCY1JsDv7TCkCVhvJxAodrtGg4oo2NPfrGOrKAP8Dq
 LClvFEqDcXq1kKcipw3Q7BwDlBpJEvLZ0iAl19BnLAmBzI3Wfze9ouoYv8WiUyaY
 br0GPShGf16I3DKtTdHsHH/zmayQ7JSmFzZ9JEHzcBrE4AprfWLuwsUjd2WXDD6U
 wK+p4tWd0AUFf+/h4u1yQB9/rlt+JZ2ny/A2u4YR/BPtthiYqp8SDSH62vpCSFOE
 dByDeTbfjTdJsWr+bsI2gOO0sVwDYpph9SJfAyBn4miKw7v8w+2rI1oqo/ZQkP59
 0SczM9C9jzpgXSGDc4yQbnqoA4KA9U6zljd12mYL5HV/AjhD19va3FmENgByZUuE
 Z7A0RZsiU5T401xEZiOUhwzy9m/USc1O2ivCmeowx9kP/gWic0KeAsmlMiro0jeR
 y9jthci8iOgjjLmCEVC06GWGUojP2roXI/38We6enVevy2GXbEEDRa1QGbQ5ndoJ
 MEPm4NvW1wsBgWIYmg==
 =WR15
 -----END PGP SIGNATURE-----

Merge tag 'loongarch-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch updates from Huacai Chen:

 - Select some options in Kconfig

 - Give a chance to build with !CONFIG_SMP

 - Switch to use built-in rustc target

 - Add new supported device nodes to dts

 - Some bug fixes and other small changes

 - Update the default config file

* tag 'loongarch-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
  LoongArch: Update Loongson-3 default config file
  LoongArch: dts: Add new supported device nodes to Loongson-2K2000
  LoongArch: dts: Add new supported device nodes to Loongson-2K0500
  LoongArch: dts: Remove "disabled" state of clock controller node
  LoongArch: rust: Switch to use built-in rustc target
  LoongArch: Fix callchain parse error with kernel tracepoint events again
  LoongArch: Give a chance to build with !CONFIG_SMP
  LoongArch: Select THP_SWAP if HAVE_ARCH_TRANSPARENT_HUGEPAGE
  LoongArch: Select ARCH_WANT_DEFAULT_BPF_JIT
  LoongArch: Select ARCH_SUPPORTS_INT128 if CC_HAS_INT128
  LoongArch: Select ARCH_HAS_FAST_MULTIPLIER
 2024-05-22 09:43:07 -07:00
Linus Torvalds
3eb3c33c1d asm-generic cleanups for 6.10 
These are a few cross-architecture cleanup patches:
 
  - Thomas Zimmermann works on separating fbdev support from the asm/video.h
    contents that may be used by either the old fbdev drivers or the
    newer drm display code.
 
  - Thorsten Blum contributes cleanups for the generic bitops code
    and asm-generic/bug.h
 
  - I remove the orphaned include/asm-generic/page.h header that used to
    included by long-removed mmu-less architectures.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmZLvewACgkQYKtH/8kJ
 UicUEQ//b5WVLOVXkFGlQvAaZkagOLEF8xSTnchA7aKrWQ/C6hSwLN6CQU6MAY7j
 Fe54jYQtjwBwpVIj3jn20xiXP/pZbQp9aldkOx4v8YoGnjNF5UWLHm5510DV1ecE
 0LF/2YIH25vIXGY6MVm6sFq+nkDgWZee6fBFNc3GsCu2y0biD1Gob9xH/ngCHjIj
 tw9KS/j6MivPy/9vJ/Ml2YeutV6+pUA9hNmSrbSVlXSWFh3Wq6IZ+j6bNEftqtZY
 xdnYwdVfReOCIayq6hSHhAgIp/uw8JOqLuE2JNwG/9sSF4zp4ZHLvTaMhqEoCpyB
 3kZYd1qQTwV3eL5PyYtRcW03KvbhfZpMPzZT+wbl9SNPUljC2MSVeSFF30Uqatgb
 yUJ9d/vlb1ynu1yQrFfTZ/kK+U0pPByydwLybcMtEIZ6Hrb1h/eRicvHhUx7bKUB
 H9z/FN/TxGY+tPradx2lqm3J1wNu0ox8DUreXjtlJijKIUZQeAkJrGJgr6i6XLBz
 crwgKzuQUClzEjBcoWzuTVUB7v19jaDuHMsaBBu8O9f1g5FnEIJlItqnXf1J0Dno
 rJy68Mxsg4Dzt4YI3lpOJGDDDPhpOTBXfgsjkuru2MrdFMgZQh+DYLl3qOkJ4DJe
 rdiEJb9PygBaGGQnoXO71oOLf5yQuenj+Fg5GIe9AQrci5fXwRQ=
 =riCs
 -----END PGP SIGNATURE-----

Merge tag 'asm-generic-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pull asm-generic cleanups from Arnd Bergmann:
 "These are a few cross-architecture cleanup patches:

   - separate out fbdev support from the asm/video.h contents that may
     be used by either the old fbdev drivers or the newer drm display
     code (Thomas Zimmermann)

   - cleanups for the generic bitops code and asm-generic/bug.h
     (Thorsten Blum)

   - remove the orphaned include/asm-generic/page.h header that used to
     be included by long-removed mmu-less architectures (me)"

* tag 'asm-generic-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  arch: Fix name collision with ACPI's video.o
  bug: Improve comment
  asm-generic: remove unused asm-generic/page.h
  arch: Rename fbdev header and source files
  arch: Remove struct fb_info from video helpers
  arch: Select fbdev helpers with CONFIG_VIDEO
  bitops: Change function return types from long to int
 2024-05-20 15:18:34 -07:00
Samuel Holland
372f662345 LoongArch: implement ARCH_HAS_KERNEL_FPU_SUPPORT 
LoongArch already provides kernel_fpu_begin() and kernel_fpu_end() in
asm/fpu.h, so it only needs to add kernel_fpu_available() and export the
CFLAGS adjustments.

Link: https://lkml.kernel.org/r/20240329072441.591471-8-samuel.holland@sifive.com
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Acked-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian König <christian.koenig@amd.com> 
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
 2024-05-19 14:36:18 -07:00
Linus Torvalds
61307b7be4 The usual shower of singleton fixes and minor series all over MM, 
documented (hopefully adequately) in the respective changelogs.  Notable
 series include:
 
 - Lucas Stach has provided some page-mapping
   cleanup/consolidation/maintainability work in the series "mm/treewide:
   Remove pXd_huge() API".
 
 - In the series "Allow migrate on protnone reference with
   MPOL_PREFERRED_MANY policy", Donet Tom has optimized mempolicy's
   MPOL_PREFERRED_MANY mode, yielding almost doubled performance in one
   test.
 
 - In their series "Memory allocation profiling" Kent Overstreet and
   Suren Baghdasaryan have contributed a means of determining (via
   /proc/allocinfo) whereabouts in the kernel memory is being allocated:
   number of calls and amount of memory.
 
 - Matthew Wilcox has provided the series "Various significant MM
   patches" which does a number of rather unrelated things, but in largely
   similar code sites.
 
 - In his series "mm: page_alloc: freelist migratetype hygiene" Johannes
   Weiner has fixed the page allocator's handling of migratetype requests,
   with resulting improvements in compaction efficiency.
 
 - In the series "make the hugetlb migration strategy consistent" Baolin
   Wang has fixed a hugetlb migration issue, which should improve hugetlb
   allocation reliability.
 
 - Liu Shixin has hit an I/O meltdown caused by readahead in a
   memory-tight memcg.  Addressed in the series "Fix I/O high when memory
   almost met memcg limit".
 
 - In the series "mm/filemap: optimize folio adding and splitting" Kairui
   Song has optimized pagecache insertion, yielding ~10% performance
   improvement in one test.
 
 - Baoquan He has cleaned up and consolidated the early zone
   initialization code in the series "mm/mm_init.c: refactor
   free_area_init_core()".
 
 - Baoquan has also redone some MM initializatio code in the series
   "mm/init: minor clean up and improvement".
 
 - MM helper cleanups from Christoph Hellwig in his series "remove
   follow_pfn".
 
 - More cleanups from Matthew Wilcox in the series "Various page->flags
   cleanups".
 
 - Vlastimil Babka has contributed maintainability improvements in the
   series "memcg_kmem hooks refactoring".
 
 - More folio conversions and cleanups in Matthew Wilcox's series
 
 	"Convert huge_zero_page to huge_zero_folio"
 	"khugepaged folio conversions"
 	"Remove page_idle and page_young wrappers"
 	"Use folio APIs in procfs"
 	"Clean up __folio_put()"
 	"Some cleanups for memory-failure"
 	"Remove page_mapping()"
 	"More folio compat code removal"
 
 - David Hildenbrand chipped in with "fs/proc/task_mmu: convert hugetlb
   functions to work on folis".
 
 - Code consolidation and cleanup work related to GUP's handling of
   hugetlbs in Peter Xu's series "mm/gup: Unify hugetlb, part 2".
 
 - Rick Edgecombe has developed some fixes to stack guard gaps in the
   series "Cover a guard gap corner case".
 
 - Jinjiang Tu has fixed KSM's behaviour after a fork+exec in the series
   "mm/ksm: fix ksm exec support for prctl".
 
 - Baolin Wang has implemented NUMA balancing for multi-size THPs.  This
   is a simple first-cut implementation for now.  The series is "support
   multi-size THP numa balancing".
 
 - Cleanups to vma handling helper functions from Matthew Wilcox in the
   series "Unify vma_address and vma_pgoff_address".
 
 - Some selftests maintenance work from Dev Jain in the series
   "selftests/mm: mremap_test: Optimizations and style fixes".
 
 - Improvements to the swapping of multi-size THPs from Ryan Roberts in
   the series "Swap-out mTHP without splitting".
 
 - Kefeng Wang has significantly optimized the handling of arm64's
   permission page faults in the series
 
 	"arch/mm/fault: accelerate pagefault when badaccess"
 	"mm: remove arch's private VM_FAULT_BADMAP/BADACCESS"
 
 - GUP cleanups from David Hildenbrand in "mm/gup: consistently call it
   GUP-fast".
 
 - hugetlb fault code cleanups from Vishal Moola in "Hugetlb fault path to
   use struct vm_fault".
 
 - selftests build fixes from John Hubbard in the series "Fix
   selftests/mm build without requiring "make headers"".
 
 - Memory tiering fixes/improvements from Ho-Ren (Jack) Chuang in the
   series "Improved Memory Tier Creation for CPUless NUMA Nodes".  Fixes
   the initialization code so that migration between different memory types
   works as intended.
 
 - David Hildenbrand has improved follow_pte() and fixed an errant driver
   in the series "mm: follow_pte() improvements and acrn follow_pte()
   fixes".
 
 - David also did some cleanup work on large folio mapcounts in his
   series "mm: mapcount for large folios + page_mapcount() cleanups".
 
 - Folio conversions in KSM in Alex Shi's series "transfer page to folio
   in KSM".
 
 - Barry Song has added some sysfs stats for monitoring multi-size THP's
   in the series "mm: add per-order mTHP alloc and swpout counters".
 
 - Some zswap cleanups from Yosry Ahmed in the series "zswap same-filled
   and limit checking cleanups".
 
 - Matthew Wilcox has been looking at buffer_head code and found the
   documentation to be lacking.  The series is "Improve buffer head
   documentation".
 
 - Multi-size THPs get more work, this time from Lance Yang.  His series
   "mm/madvise: enhance lazyfreeing with mTHP in madvise_free" optimizes
   the freeing of these things.
 
 - Kemeng Shi has added more userspace-visible writeback instrumentation
   in the series "Improve visibility of writeback".
 
 - Kemeng Shi then sent some maintenance work on top in the series "Fix
   and cleanups to page-writeback".
 
 - Matthew Wilcox reduces mmap_lock traffic in the anon vma code in the
   series "Improve anon_vma scalability for anon VMAs".  Intel's test bot
   reported an improbable 3x improvement in one test.
 
 - SeongJae Park adds some DAMON feature work in the series
 
 	"mm/damon: add a DAMOS filter type for page granularity access recheck"
 	"selftests/damon: add DAMOS quota goal test"
 
 - Also some maintenance work in the series
 
 	"mm/damon/paddr: simplify page level access re-check for pageout"
 	"mm/damon: misc fixes and improvements"
 
 - David Hildenbrand has disabled some known-to-fail selftests ni the
   series "selftests: mm: cow: flag vmsplice() hugetlb tests as XFAIL".
 
 - memcg metadata storage optimizations from Shakeel Butt in "memcg:
   reduce memory consumption by memcg stats".
 
 - DAX fixes and maintenance work from Vishal Verma in the series
   "dax/bus.c: Fixups for dax-bus locking".
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZkgQYwAKCRDdBJ7gKXxA
 jrdKAP9WVJdpEcXxpoub/vVE0UWGtffr8foifi9bCwrQrGh5mgEAx7Yf0+d/oBZB
 nvA4E0DcPrUAFy144FNM0NTCb7u9vAw=
 =V3R/
 -----END PGP SIGNATURE-----

Merge tag 'mm-stable-2024-05-17-19-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull mm updates from Andrew Morton:
 "The usual shower of singleton fixes and minor series all over MM,
  documented (hopefully adequately) in the respective changelogs.
  Notable series include:

   - Lucas Stach has provided some page-mapping cleanup/consolidation/
     maintainability work in the series "mm/treewide: Remove pXd_huge()
     API".

   - In the series "Allow migrate on protnone reference with
     MPOL_PREFERRED_MANY policy", Donet Tom has optimized mempolicy's
     MPOL_PREFERRED_MANY mode, yielding almost doubled performance in
     one test.

   - In their series "Memory allocation profiling" Kent Overstreet and
     Suren Baghdasaryan have contributed a means of determining (via
     /proc/allocinfo) whereabouts in the kernel memory is being
     allocated: number of calls and amount of memory.

   - Matthew Wilcox has provided the series "Various significant MM
     patches" which does a number of rather unrelated things, but in
     largely similar code sites.

   - In his series "mm: page_alloc: freelist migratetype hygiene"
     Johannes Weiner has fixed the page allocator's handling of
     migratetype requests, with resulting improvements in compaction
     efficiency.

   - In the series "make the hugetlb migration strategy consistent"
     Baolin Wang has fixed a hugetlb migration issue, which should
     improve hugetlb allocation reliability.

   - Liu Shixin has hit an I/O meltdown caused by readahead in a
     memory-tight memcg. Addressed in the series "Fix I/O high when
     memory almost met memcg limit".

   - In the series "mm/filemap: optimize folio adding and splitting"
     Kairui Song has optimized pagecache insertion, yielding ~10%
     performance improvement in one test.

   - Baoquan He has cleaned up and consolidated the early zone
     initialization code in the series "mm/mm_init.c: refactor
     free_area_init_core()".

   - Baoquan has also redone some MM initializatio code in the series
     "mm/init: minor clean up and improvement".

   - MM helper cleanups from Christoph Hellwig in his series "remove
     follow_pfn".

   - More cleanups from Matthew Wilcox in the series "Various
     page->flags cleanups".

   - Vlastimil Babka has contributed maintainability improvements in the
     series "memcg_kmem hooks refactoring".

   - More folio conversions and cleanups in Matthew Wilcox's series:
	"Convert huge_zero_page to huge_zero_folio"
	"khugepaged folio conversions"
	"Remove page_idle and page_young wrappers"
	"Use folio APIs in procfs"
	"Clean up __folio_put()"
	"Some cleanups for memory-failure"
	"Remove page_mapping()"
	"More folio compat code removal"

   - David Hildenbrand chipped in with "fs/proc/task_mmu: convert
     hugetlb functions to work on folis".

   - Code consolidation and cleanup work related to GUP's handling of
     hugetlbs in Peter Xu's series "mm/gup: Unify hugetlb, part 2".

   - Rick Edgecombe has developed some fixes to stack guard gaps in the
     series "Cover a guard gap corner case".

   - Jinjiang Tu has fixed KSM's behaviour after a fork+exec in the
     series "mm/ksm: fix ksm exec support for prctl".

   - Baolin Wang has implemented NUMA balancing for multi-size THPs.
     This is a simple first-cut implementation for now. The series is
     "support multi-size THP numa balancing".

   - Cleanups to vma handling helper functions from Matthew Wilcox in
     the series "Unify vma_address and vma_pgoff_address".

   - Some selftests maintenance work from Dev Jain in the series
     "selftests/mm: mremap_test: Optimizations and style fixes".

   - Improvements to the swapping of multi-size THPs from Ryan Roberts
     in the series "Swap-out mTHP without splitting".

   - Kefeng Wang has significantly optimized the handling of arm64's
     permission page faults in the series
	"arch/mm/fault: accelerate pagefault when badaccess"
	"mm: remove arch's private VM_FAULT_BADMAP/BADACCESS"

   - GUP cleanups from David Hildenbrand in "mm/gup: consistently call
     it GUP-fast".

   - hugetlb fault code cleanups from Vishal Moola in "Hugetlb fault
     path to use struct vm_fault".

   - selftests build fixes from John Hubbard in the series "Fix
     selftests/mm build without requiring "make headers"".

   - Memory tiering fixes/improvements from Ho-Ren (Jack) Chuang in the
     series "Improved Memory Tier Creation for CPUless NUMA Nodes".
     Fixes the initialization code so that migration between different
     memory types works as intended.

   - David Hildenbrand has improved follow_pte() and fixed an errant
     driver in the series "mm: follow_pte() improvements and acrn
     follow_pte() fixes".

   - David also did some cleanup work on large folio mapcounts in his
     series "mm: mapcount for large folios + page_mapcount() cleanups".

   - Folio conversions in KSM in Alex Shi's series "transfer page to
     folio in KSM".

   - Barry Song has added some sysfs stats for monitoring multi-size
     THP's in the series "mm: add per-order mTHP alloc and swpout
     counters".

   - Some zswap cleanups from Yosry Ahmed in the series "zswap
     same-filled and limit checking cleanups".

   - Matthew Wilcox has been looking at buffer_head code and found the
     documentation to be lacking. The series is "Improve buffer head
     documentation".

   - Multi-size THPs get more work, this time from Lance Yang. His
     series "mm/madvise: enhance lazyfreeing with mTHP in madvise_free"
     optimizes the freeing of these things.

   - Kemeng Shi has added more userspace-visible writeback
     instrumentation in the series "Improve visibility of writeback".

   - Kemeng Shi then sent some maintenance work on top in the series
     "Fix and cleanups to page-writeback".

   - Matthew Wilcox reduces mmap_lock traffic in the anon vma code in
     the series "Improve anon_vma scalability for anon VMAs". Intel's
     test bot reported an improbable 3x improvement in one test.

   - SeongJae Park adds some DAMON feature work in the series
	"mm/damon: add a DAMOS filter type for page granularity access recheck"
	"selftests/damon: add DAMOS quota goal test"

   - Also some maintenance work in the series
	"mm/damon/paddr: simplify page level access re-check for pageout"
	"mm/damon: misc fixes and improvements"

   - David Hildenbrand has disabled some known-to-fail selftests ni the
     series "selftests: mm: cow: flag vmsplice() hugetlb tests as
     XFAIL".

   - memcg metadata storage optimizations from Shakeel Butt in "memcg:
     reduce memory consumption by memcg stats".

   - DAX fixes and maintenance work from Vishal Verma in the series
     "dax/bus.c: Fixups for dax-bus locking""

* tag 'mm-stable-2024-05-17-19-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (426 commits)
  memcg, oom: cleanup unused memcg_oom_gfp_mask and memcg_oom_order
  selftests/mm: hugetlb_madv_vs_map: avoid test skipping by querying hugepage size at runtime
  mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_wp
  mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_fault
  selftests: cgroup: add tests to verify the zswap writeback path
  mm: memcg: make alloc_mem_cgroup_per_node_info() return bool
  mm/damon/core: fix return value from damos_wmark_metric_value
  mm: do not update memcg stats for NR_{FILE/SHMEM}_PMDMAPPED
  selftests: cgroup: remove redundant enabling of memory controller
  Docs/mm/damon/maintainer-profile: allow posting patches based on damon/next tree
  Docs/mm/damon/maintainer-profile: change the maintainer's timezone from PST to PT
  Docs/mm/damon/design: use a list for supported filters
  Docs/admin-guide/mm/damon/usage: fix wrong schemes effective quota update command
  Docs/admin-guide/mm/damon/usage: fix wrong example of DAMOS filter matching sysfs file
  selftests/damon: classify tests for functionalities and regressions
  selftests/damon/_damon_sysfs: use 'is' instead of '==' for 'None'
  selftests/damon/_damon_sysfs: find sysfs mount point from /proc/mounts
  selftests/damon/_damon_sysfs: check errors from nr_schemes file reads
  mm/damon/core: initialize ->esz_bp from damos_quota_init_priv()
  selftests/damon: add a test for DAMOS quota goal
  ...
 2024-05-19 09:21:03 -07:00
Huacai Chen
9cc1df421f LoongArch: Update Loongson-3 default config file 
1, Enable PSI tracking.
2, Enable IKCONFIG/IKHEADERS.
3, Enable Generic PHY driver.
4, Enable Motorcomm PHY driver.
5, Enable ORC stack unwinder.
6, Enable some squashfs options.
7, Enable some netfilter options.

Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
 2024-05-19 22:18:56 +08:00
Linus Torvalds
ff9a79307f Kbuild updates for v6.10 
- Avoid 'constexpr', which is a keyword in C23
 
  - Allow 'dtbs_check' and 'dt_compatible_check' run independently of
    'dt_binding_check'
 
  - Fix weak references to avoid GOT entries in position-independent
    code generation
 
  - Convert the last use of 'optional' property in arch/sh/Kconfig
 
  - Remove support for the 'optional' property in Kconfig
 
  - Remove support for Clang's ThinLTO caching, which does not work with
    the .incbin directive
 
  - Change the semantics of $(src) so it always points to the source
    directory, which fixes Makefile inconsistencies between upstream and
    downstream
 
  - Fix 'make tar-pkg' for RISC-V to produce a consistent package
 
  - Provide reasonable default coverage for objtool, sanitizers, and
    profilers
 
  - Remove redundant OBJECT_FILES_NON_STANDARD, KASAN_SANITIZE, etc.
 
  - Remove the last use of tristate choice in drivers/rapidio/Kconfig
 
  - Various cleanups and fixes in Kconfig
 -----BEGIN PGP SIGNATURE-----
 
 iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAmZFlGcVHG1hc2FoaXJv
 eUBrZXJuZWwub3JnAAoJED2LAQed4NsG8voQALC8NtFpduWVfLRj2Qg6Ll/xf1vX
 2igcTJEOFHkeqXLGoT8dTDKLEipUBUvKyguPq66CGwVTe2g6zy/nUSXeVtFrUsIa
 msLTi8FqhqUo5lodNvGMRf8qqmuqcvnXoiQwIocF92jtsFy14bhiFY+n4HfcFNjj
 GOKwqBZYQUwY/VVb090efc7RfS9c7uwABJSBelSoxg3AGZriwjGy7Pw5aSKGgVYi
 inqL1eR6qwPP6z7CgQWM99soP+zwybFZmnQrsD9SniRBI4rtAat8Ih5jQFaSUFUQ
 lk2w0NQBRFN88/uR2IJ2GWuIlQ74WeJ+QnCqVuQ59tV5zw90wqSmLzngfPD057Dv
 JjNuhk0UyXVtpIg3lRtd4810ppNSTe33b9OM4O2H846W/crju5oDRNDHcflUXcwm
 Rmn5ho1rb5QVzDVejJbgwidnUInSgJ9PZcvXQ/RJVZPhpgsBzAY9pQexG1G3hviw
 y9UDrt6KP6bF9tHjmolmtdIes9Pj0c4dN6/Rdj4HS4hIQ/GDar0tnwvOvtfUctNL
 orJlBsA6GeMmDVXKkR0ytOCWRYqWWbyt8g70RVKQJfuHX7/hGyAQPaQ2/u4mQhC2
 aevYfbNJMj0VDfGz81HDBKFtkc5n+Ite8l157dHEl2LEabkOkRdNVcn7SNbOvZmd
 ZCSnZ31h7woGfNho
 =D5B/
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild updates from Masahiro Yamada:

 - Avoid 'constexpr', which is a keyword in C23

 - Allow 'dtbs_check' and 'dt_compatible_check' run independently of
   'dt_binding_check'

 - Fix weak references to avoid GOT entries in position-independent code
   generation

 - Convert the last use of 'optional' property in arch/sh/Kconfig

 - Remove support for the 'optional' property in Kconfig

 - Remove support for Clang's ThinLTO caching, which does not work with
   the .incbin directive

 - Change the semantics of $(src) so it always points to the source
   directory, which fixes Makefile inconsistencies between upstream and
   downstream

 - Fix 'make tar-pkg' for RISC-V to produce a consistent package

 - Provide reasonable default coverage for objtool, sanitizers, and
   profilers

 - Remove redundant OBJECT_FILES_NON_STANDARD, KASAN_SANITIZE, etc.

 - Remove the last use of tristate choice in drivers/rapidio/Kconfig

 - Various cleanups and fixes in Kconfig

* tag 'kbuild-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (46 commits)
  kconfig: use sym_get_choice_menu() in sym_check_prop()
  rapidio: remove choice for enumeration
  kconfig: lxdialog: remove initialization with A_NORMAL
  kconfig: m/nconf: merge two item_add_str() calls
  kconfig: m/nconf: remove dead code to display value of bool choice
  kconfig: m/nconf: remove dead code to display children of choice members
  kconfig: gconf: show checkbox for choice correctly
  kbuild: use GCOV_PROFILE and KCSAN_SANITIZE in scripts/Makefile.modfinal
  Makefile: remove redundant tool coverage variables
  kbuild: provide reasonable defaults for tool coverage
  modules: Drop the .export_symbol section from the final modules
  kconfig: use menu_list_for_each_sym() in sym_check_choice_deps()
  kconfig: use sym_get_choice_menu() in conf_write_defconfig()
  kconfig: add sym_get_choice_menu() helper
  kconfig: turn defaults and additional prompt for choice members into error
  kconfig: turn missing prompt for choice members into error
  kconfig: turn conf_choice() into void function
  kconfig: use linked list in sym_set_changed()
  kconfig: gconf: use MENU_CHANGED instead of SYMBOL_CHANGED
  kconfig: gconf: remove debug code
  ...
 2024-05-18 12:39:20 -07:00
Linus Torvalds
0cc6f45cec IOMMU Updates for Linux v6.10 
Including:
 
 	- Core:
 	  - IOMMU memory usage observability - This will make the memory used
 	    for IO page tables explicitly visible.
 	  - Simplify arch_setup_dma_ops()
 
 	- Intel VT-d:
 	  - Consolidate domain cache invalidation
 	  - Remove private data from page fault message
 	  - Allocate DMAR fault interrupts locally
 	  - Cleanup and refactoring
 
 	- ARM-SMMUv2:
 	  - Support for fault debugging hardware on Qualcomm implementations
 	  - Re-land support for the ->domain_alloc_paging() callback
 
 	- ARM-SMMUv3:
 	  - Improve handling of MSI allocation failure
 	  - Drop support for the "disable_bypass" cmdline option
 	  - Major rework of the CD creation code, following on directly from the
 	    STE rework merged last time around.
 	  - Add unit tests for the new STE/CD manipulation logic
 
 	- AMD-Vi:
 	  - Final part of SVA changes with generic IO page fault handling
 
 	- Renesas IPMMU:
 	  - Add support for R8A779H0 hardware
 
 	- A couple smaller fixes and updates across the sub-tree
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEr9jSbILcajRFYWYyK/BELZcBGuMFAmZHJMkACgkQK/BELZcB
 GuND1Q/+M4RN5jM66XCfhqoP8QaI8I7zDlPDd14ismx0bjtOZhoiXpptKkAA8guo
 7mS57MLqBw/hKYucm1mw+F1qi1HnRWSstKXiCPmzDm3UXYgZJlKkrOw6vydFeHJH
 zx2ei7TmBrc0SrsybWK3NWRfVBBkO8enGZTmti0DfHL/rOFcUM0LHegY51GcDaaH
 SlDr+LLDMeGynSQWhRlVNJVmEI5gpVPitY/mDUpVPoELiW9C0WGk8kPlR11z2pCR
 eUNiqGJUcGasOhmfiYnpJR462eg7J41glquu+YHj8ivPbbu3C4wxgruY/tR4dmJG
 8s6AMAWR53JzG2SrCCwtzyRPSXmKfvixF+VKmlB2Ksc7VAn1xA0DYnY5Tx99EtXu
 qcEaR4SICMti0urmBGo/cGFdXi2TB1ccXqwoRtp1N3KiYnnOaQdLNO9qZdl9uUTI
 uleXACzkCVSssSpBfGjFcPyHU4r3WjMfX0f5ZJPpFMoQmvwV1yeMX7xTEZz4Sxew
 cHfBt9FAW9+4mBMTQfokBt0hZ6jwKcYl/z3Xi2oD+Ik/Qrzx5kcLA8LZLEVRXIBa
 SZh2ASazq/dr8YoZ744VRmlmi+nISAIHbbQMeqQEQgYQh0HpwS9g5HtpsBzNP6aB
 91RHqZSccb/zNdi8e+RH79Y7pX/G5QcuVKcW6KQUBcAAb6hAgOg=
 =JUzp
 -----END PGP SIGNATURE-----

Merge tag 'iommu-updates-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull iommu updates from Joerg Roedel:
 "Core:
   - IOMMU memory usage observability - This will make the memory used
     for IO page tables explicitly visible.
   - Simplify arch_setup_dma_ops()

  Intel VT-d:
   - Consolidate domain cache invalidation
   - Remove private data from page fault message
   - Allocate DMAR fault interrupts locally
   - Cleanup and refactoring

  ARM-SMMUv2:
   - Support for fault debugging hardware on Qualcomm implementations
   - Re-land support for the ->domain_alloc_paging() callback

  ARM-SMMUv3:
   - Improve handling of MSI allocation failure
   - Drop support for the "disable_bypass" cmdline option
   - Major rework of the CD creation code, following on directly from
     the STE rework merged last time around.
   - Add unit tests for the new STE/CD manipulation logic

  AMD-Vi:
   - Final part of SVA changes with generic IO page fault handling

  Renesas IPMMU:
   - Add support for R8A779H0 hardware

  ... and a couple smaller fixes and updates across the sub-tree"

* tag 'iommu-updates-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (80 commits)
  iommu/arm-smmu-v3: Make the kunit into a module
  arm64: Properly clean up iommu-dma remnants
  iommu/amd: Enable Guest Translation after reading IOMMU feature register
  iommu/vt-d: Decouple igfx_off from graphic identity mapping
  iommu/amd: Fix compilation error
  iommu/arm-smmu-v3: Add unit tests for arm_smmu_write_entry
  iommu/arm-smmu-v3: Build the whole CD in arm_smmu_make_s1_cd()
  iommu/arm-smmu-v3: Move the CD generation for SVA into a function
  iommu/arm-smmu-v3: Allocate the CD table entry in advance
  iommu/arm-smmu-v3: Make arm_smmu_alloc_cd_ptr()
  iommu/arm-smmu-v3: Consolidate clearing a CD table entry
  iommu/arm-smmu-v3: Move the CD generation for S1 domains into a function
  iommu/arm-smmu-v3: Make CD programming use arm_smmu_write_entry()
  iommu/arm-smmu-v3: Add an ops indirection to the STE code
  iommu/arm-smmu-qcom: Don't build debug features as a kernel module
  iommu/amd: Add SVA domain support
  iommu: Add ops->domain_alloc_sva()
  iommu/amd: Initial SVA support for AMD IOMMU
  iommu/amd: Add support for enable/disable IOPF
  iommu/amd: Add IO page fault notifier handler
  ...
 2024-05-18 10:55:13 -07:00
Linus Torvalds
70a663205d Probes updates for v6.10: 
- tracing/probes: Adding new pseudo-types %pd and %pD support for dumping
   dentry name from 'struct dentry *' and file name from 'struct file *'.
 
 - uprobes: Some performance optimizations have been done.
  . Speed up the BPF uprobe event by delaying the fetching of the uprobe
    event arguments that are not used in BPF.
  . Avoid locking by speculatively checking whether uprobe event is valid.
  . Reduce lock contention by using read/write_lock instead of spinlock for
    uprobe list operation. This improved BPF uprobe benchmark result 43% on
    average.
 
 - rethook: Removes non-fatal warning messages when tracing stack from BPF
   and skip rcu_is_watching() validation in rethook if possible.
 
 - objpool: Optimizing objpool (which is used by kretprobes and fprobe as
   rethook backend storage) by inlining functions and avoid caching nr_cpu_ids
   because it is a const value.
 
 - fprobe: Add entry/exit callbacks types (code cleanup)
 - kprobes: Check ftrace was killed in kprobes if it uses ftrace.
 -----BEGIN PGP SIGNATURE-----
 
 iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmZFUxsbHG1hc2FtaS5o
 aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8b+fIH/A96/SeC5WRLhXmHfTCM
 IvKUea2n0b0oV/2pVfHqfkCBTICuUZ97Opd9VH9jLtjBOTh0fUOGZ2DNVGdSYfWm
 IIkS5dhuZxHXrSHEVYykwLHI3AOL7Q6Ny9EmOg1CNMidUkPMNtBvppsBYPlFU/B/
 qQJAvOdkVOnNITCaas0+MNgepoVVKdJzdNQ1I4WrGyG8isCZBaCYKo2QcGyheCNN
 y8NXvnVHgmgHQ8nTaeE5AawclFzFnhwHfPQPe1kiyGrx15b8K+VYmaZxPKv33A1a
 KT3TKJ1Ep7s7iWFh2iPVJzIwOXCmSnvNTKfNx/MDuKtO7UVfFwytoMEaekbmv3bG
 VqM=
 =n/mW
 -----END PGP SIGNATURE-----

Merge tag 'probes-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull probes updates from Masami Hiramatsu:

 - tracing/probes: Add new pseudo-types %pd and %pD support for dumping
   dentry name from 'struct dentry *' and file name from 'struct file *'

 - uprobes performance optimizations:
    - Speed up the BPF uprobe event by delaying the fetching of the
      uprobe event arguments that are not used in BPF
    - Avoid locking by speculatively checking whether uprobe event is
      valid
    - Reduce lock contention by using read/write_lock instead of
      spinlock for uprobe list operation. This improved BPF uprobe
      benchmark result 43% on average

 - rethook: Remove non-fatal warning messages when tracing stack from
   BPF and skip rcu_is_watching() validation in rethook if possible

 - objpool: Optimize objpool (which is used by kretprobes and fprobe as
   rethook backend storage) by inlining functions and avoid caching
   nr_cpu_ids because it is a const value

 - fprobe: Add entry/exit callbacks types (code cleanup)

 - kprobes: Check ftrace was killed in kprobes if it uses ftrace

* tag 'probes-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  kprobe/ftrace: bail out if ftrace was killed
  selftests/ftrace: Fix required features for VFS type test case
  objpool: cache nr_possible_cpus() and avoid caching nr_cpu_ids
  objpool: enable inlining objpool_push() and objpool_pop() operations
  rethook: honor CONFIG_FTRACE_VALIDATE_RCU_IS_WATCHING in rethook_try_get()
  ftrace: make extra rcu_is_watching() validation check optional
  uprobes: reduce contention on uprobes_tree access
  rethook: Remove warning messages printed for finding return address of a frame.
  fprobe: Add entry/exit callbacks types
  selftests/ftrace: add fprobe test cases for VFS type "%pd" and "%pD"
  selftests/ftrace: add kprobe test cases for VFS type "%pd" and "%pD"
  Documentation: tracing: add new type '%pd' and '%pD' for kprobe
  tracing/probes: support '%pD' type for print struct file's name
  tracing/probes: support '%pd' type for print struct dentry's name
  uprobes: add speculative lockless system-wide uprobe filter check
  uprobes: prepare uprobe args buffer lazily
  uprobes: encapsulate preparation of uprobe args buffer
 2024-05-17 18:29:30 -07:00
Stephen Brennan
1a7d0890dd kprobe/ftrace: bail out if ftrace was killed 
If an error happens in ftrace, ftrace_kill() will prevent disarming
kprobes. Eventually, the ftrace_ops associated with the kprobes will be
freed, yet the kprobes will still be active, and when triggered, they
will use the freed memory, likely resulting in a page fault and panic.

This behavior can be reproduced quite easily, by creating a kprobe and
then triggering a ftrace_kill(). For simplicity, we can simulate an
ftrace error with a kernel module like [1]:

[1]: https://github.com/brenns10/kernel_stuff/tree/master/ftrace_killer

  sudo perf probe --add commit_creds
  sudo perf trace -e probe:commit_creds
  # In another terminal
  make
  sudo insmod ftrace_killer.ko  # calls ftrace_kill(), simulating bug
  # Back to perf terminal
  # ctrl-c
  sudo perf probe --del commit_creds

After a short period, a page fault and panic would occur as the kprobe
continues to execute and uses the freed ftrace_ops. While ftrace_kill()
is supposed to be used only in extreme circumstances, it is invoked in
FTRACE_WARN_ON() and so there are many places where an unexpected bug
could be triggered, yet the system may continue operating, possibly
without the administrator noticing. If ftrace_kill() does not panic the
system, then we should do everything we can to continue operating,
rather than leave a ticking time bomb.

Link: https://lore.kernel.org/all/20240501162956.229427-1-stephen.s.brennan@oracle.com/

Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
 2024-05-16 07:23:30 +09:00
Linus Torvalds
f4b0c4b508 ARM: 
* Move a lot of state that was previously stored on a per vcpu
   basis into a per-CPU area, because it is only pertinent to the
   host while the vcpu is loaded. This results in better state
   tracking, and a smaller vcpu structure.
 
 * Add full handling of the ERET/ERETAA/ERETAB instructions in
   nested virtualisation. The last two instructions also require
   emulating part of the pointer authentication extension.
   As a result, the trap handling of pointer authentication has
   been greatly simplified.
 
 * Turn the global (and not very scalable) LPI translation cache
   into a per-ITS, scalable cache, making non directly injected
   LPIs much cheaper to make visible to the vcpu.
 
 * A batch of pKVM patches, mostly fixes and cleanups, as the
   upstreaming process seems to be resuming. Fingers crossed!
 
 * Allocate PPIs and SGIs outside of the vcpu structure, allowing
   for smaller EL2 mapping and some flexibility in implementing
   more or less than 32 private IRQs.
 
 * Purge stale mpidr_data if a vcpu is created after the MPIDR
   map has been created.
 
 * Preserve vcpu-specific ID registers across a vcpu reset.
 
 * Various minor cleanups and improvements.
 
 LoongArch:
 
 * Add ParaVirt IPI support.
 
 * Add software breakpoint support.
 
 * Add mmio trace events support.
 
 RISC-V:
 
 * Support guest breakpoints using ebreak
 
 * Introduce per-VCPU mp_state_lock and reset_cntx_lock
 
 * Virtualize SBI PMU snapshot and counter overflow interrupts
 
 * New selftests for SBI PMU and Guest ebreak
 
 * Some preparatory work for both TDX and SNP page fault handling.
   This also cleans up the page fault path, so that the priorities
   of various kinds of fauls (private page, no memory, write
   to read-only slot, etc.) are easier to follow.
 
 x86:
 
 * Minimize amount of time that shadow PTEs remain in the special
   REMOVED_SPTE state.  This is a state where the mmu_lock is held for
   reading but concurrent accesses to the PTE have to spin; shortening
   its use allows other vCPUs to repopulate the zapped region while
   the zapper finishes tearing down the old, defunct page tables.
 
 * Advertise the max mappable GPA in the "guest MAXPHYADDR" CPUID field,
   which is defined by hardware but left for software use.  This lets KVM
   communicate its inability to map GPAs that set bits 51:48 on hosts
   without 5-level nested page tables.  Guest firmware is expected to
   use the information when mapping BARs; this avoids that they end up at
   a legal, but unmappable, GPA.
 
 * Fixed a bug where KVM would not reject accesses to MSR that aren't
   supposed to exist given the vCPU model and/or KVM configuration.
 
 * As usual, a bunch of code cleanups.
 
 x86 (AMD):
 
 * Implement a new and improved API to initialize SEV and SEV-ES VMs, which
   will also be extendable to SEV-SNP.  The new API specifies the desired
   encryption in KVM_CREATE_VM and then separately initializes the VM.
   The new API also allows customizing the desired set of VMSA features;
   the features affect the measurement of the VM's initial state, and
   therefore enabling them cannot be done tout court by the hypervisor.
 
   While at it, the new API includes two bugfixes that couldn't be
   applied to the old one without a flag day in userspace or without
   affecting the initial measurement.  When a SEV-ES VM is created with
   the new VM type, KVM_GET_REGS/KVM_SET_REGS and friends are
   rejected once the VMSA has been encrypted.  Also, the FPU and AVX
   state will be synchronized and encrypted too.
 
 * Support for GHCB version 2 as applicable to SEV-ES guests.  This, once
   more, is only accessible when using the new KVM_SEV_INIT2 flow for
   initialization of SEV-ES VMs.
 
 x86 (Intel):
 
 * An initial bunch of prerequisite patches for Intel TDX were merged.
   They generally don't do anything interesting.  The only somewhat user
   visible change is a new debugging mode that checks that KVM's MMU
   never triggers a #VE virtualization exception in the guest.
 
 * Clear vmcs.EXIT_QUALIFICATION when synthesizing an EPT Misconfig VM-Exit to
   L1, as per the SDM.
 
 Generic:
 
 * Use vfree() instead of kvfree() for allocations that always use vcalloc()
   or __vcalloc().
 
 * Remove .change_pte() MMU notifier - the changes to non-KVM code are
   small and Andrew Morton asked that I also take those through the KVM
   tree.  The callback was only ever implemented by KVM (which was also the
   original user of MMU notifiers) but it had been nonfunctional ever since
   calls to set_pte_at_notify were wrapped with invalidate_range_start
   and invalidate_range_end... in 2012.
 
 Selftests:
 
 * Enhance the demand paging test to allow for better reporting and stressing
   of UFFD performance.
 
 * Convert the steal time test to generate TAP-friendly output.
 
 * Fix a flaky false positive in the xen_shinfo_test due to comparing elapsed
   time across two different clock domains.
 
 * Skip the MONITOR/MWAIT test if the host doesn't actually support MWAIT.
 
 * Avoid unnecessary use of "sudo" in the NX hugepage test wrapper shell
   script, to play nice with running in a minimal userspace environment.
 
 * Allow skipping the RSEQ test's sanity check that the vCPU was able to
   complete a reasonable number of KVM_RUNs, as the assert can fail on a
   completely valid setup.  If the test is run on a large-ish system that is
   otherwise idle, and the test isn't affined to a low-ish number of CPUs, the
   vCPU task can be repeatedly migrated to CPUs that are in deep sleep states,
   which results in the vCPU having very little net runtime before the next
   migration due to high wakeup latencies.
 
 * Define _GNU_SOURCE for all selftests to fix a warning that was introduced by
   a change to kselftest_harness.h late in the 6.9 cycle, and because forcing
   every test to #define _GNU_SOURCE is painful.
 
 * Provide a global pseudo-RNG instance for all tests, so that library code can
   generate random, but determinstic numbers.
 
 * Use the global pRNG to randomly force emulation of select writes from guest
   code on x86, e.g. to help validate KVM's emulation of locked accesses.
 
 * Allocate and initialize x86's GDT, IDT, TSS, segments, and default exception
   handlers at VM creation, instead of forcing tests to manually trigger the
   related setup.
 
 Documentation:
 
 * Fix a goof in the KVM_CREATE_GUEST_MEMFD documentation.
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmZE878UHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroOukQf+LcvZsWtrC7Wd5K9SQbYXaS4Rk6P6
 JHoQW2d0hUN893J2WibEw+l1J/0vn5JumqHXyZgJ7CbaMtXkWWQTwDSDLuURUKpv
 XNB3Sb17G87NH+s1tOh0tA9h5upbtlHVHvrtIwdbb9+XHgQ6HTL4uk+HdfO/p9fW
 cWBEZAKoWcCIa99Numv3pmq5vdrvBlNggwBugBS8TH69EKMw+V1Vu1SFkIdNDTQk
 NJJ28cohoP3wnwlIHaXSmU4RujipPH3Lm/xupyA5MwmzO713eq2yUqV49jzhD5/I
 MA4Ruvgrdm4wpp89N9lQMyci91u6q7R9iZfMu0tSg2qYI3UPKIdstd8sOA==
 =2lED
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM updates from Paolo Bonzini:
 "ARM:

   - Move a lot of state that was previously stored on a per vcpu basis
     into a per-CPU area, because it is only pertinent to the host while
     the vcpu is loaded. This results in better state tracking, and a
     smaller vcpu structure.

   - Add full handling of the ERET/ERETAA/ERETAB instructions in nested
     virtualisation. The last two instructions also require emulating
     part of the pointer authentication extension. As a result, the trap
     handling of pointer authentication has been greatly simplified.

   - Turn the global (and not very scalable) LPI translation cache into
     a per-ITS, scalable cache, making non directly injected LPIs much
     cheaper to make visible to the vcpu.

   - A batch of pKVM patches, mostly fixes and cleanups, as the
     upstreaming process seems to be resuming. Fingers crossed!

   - Allocate PPIs and SGIs outside of the vcpu structure, allowing for
     smaller EL2 mapping and some flexibility in implementing more or
     less than 32 private IRQs.

   - Purge stale mpidr_data if a vcpu is created after the MPIDR map has
     been created.

   - Preserve vcpu-specific ID registers across a vcpu reset.

   - Various minor cleanups and improvements.

  LoongArch:

   - Add ParaVirt IPI support

   - Add software breakpoint support

   - Add mmio trace events support

  RISC-V:

   - Support guest breakpoints using ebreak

   - Introduce per-VCPU mp_state_lock and reset_cntx_lock

   - Virtualize SBI PMU snapshot and counter overflow interrupts

   - New selftests for SBI PMU and Guest ebreak

   - Some preparatory work for both TDX and SNP page fault handling.

     This also cleans up the page fault path, so that the priorities of
     various kinds of fauls (private page, no memory, write to read-only
     slot, etc.) are easier to follow.

  x86:

   - Minimize amount of time that shadow PTEs remain in the special
     REMOVED_SPTE state.

     This is a state where the mmu_lock is held for reading but
     concurrent accesses to the PTE have to spin; shortening its use
     allows other vCPUs to repopulate the zapped region while the zapper
     finishes tearing down the old, defunct page tables.

   - Advertise the max mappable GPA in the "guest MAXPHYADDR" CPUID
     field, which is defined by hardware but left for software use.

     This lets KVM communicate its inability to map GPAs that set bits
     51:48 on hosts without 5-level nested page tables. Guest firmware
     is expected to use the information when mapping BARs; this avoids
     that they end up at a legal, but unmappable, GPA.

   - Fixed a bug where KVM would not reject accesses to MSR that aren't
     supposed to exist given the vCPU model and/or KVM configuration.

   - As usual, a bunch of code cleanups.

  x86 (AMD):

   - Implement a new and improved API to initialize SEV and SEV-ES VMs,
     which will also be extendable to SEV-SNP.

     The new API specifies the desired encryption in KVM_CREATE_VM and
     then separately initializes the VM. The new API also allows
     customizing the desired set of VMSA features; the features affect
     the measurement of the VM's initial state, and therefore enabling
     them cannot be done tout court by the hypervisor.

     While at it, the new API includes two bugfixes that couldn't be
     applied to the old one without a flag day in userspace or without
     affecting the initial measurement. When a SEV-ES VM is created with
     the new VM type, KVM_GET_REGS/KVM_SET_REGS and friends are rejected
     once the VMSA has been encrypted. Also, the FPU and AVX state will
     be synchronized and encrypted too.

   - Support for GHCB version 2 as applicable to SEV-ES guests.

     This, once more, is only accessible when using the new
     KVM_SEV_INIT2 flow for initialization of SEV-ES VMs.

  x86 (Intel):

   - An initial bunch of prerequisite patches for Intel TDX were merged.

     They generally don't do anything interesting. The only somewhat
     user visible change is a new debugging mode that checks that KVM's
     MMU never triggers a #VE virtualization exception in the guest.

   - Clear vmcs.EXIT_QUALIFICATION when synthesizing an EPT Misconfig
     VM-Exit to L1, as per the SDM.

  Generic:

   - Use vfree() instead of kvfree() for allocations that always use
     vcalloc() or __vcalloc().

   - Remove .change_pte() MMU notifier - the changes to non-KVM code are
     small and Andrew Morton asked that I also take those through the
     KVM tree.

     The callback was only ever implemented by KVM (which was also the
     original user of MMU notifiers) but it had been nonfunctional ever
     since calls to set_pte_at_notify were wrapped with
     invalidate_range_start and invalidate_range_end... in 2012.

  Selftests:

   - Enhance the demand paging test to allow for better reporting and
     stressing of UFFD performance.

   - Convert the steal time test to generate TAP-friendly output.

   - Fix a flaky false positive in the xen_shinfo_test due to comparing
     elapsed time across two different clock domains.

   - Skip the MONITOR/MWAIT test if the host doesn't actually support
     MWAIT.

   - Avoid unnecessary use of "sudo" in the NX hugepage test wrapper
     shell script, to play nice with running in a minimal userspace
     environment.

   - Allow skipping the RSEQ test's sanity check that the vCPU was able
     to complete a reasonable number of KVM_RUNs, as the assert can fail
     on a completely valid setup.

     If the test is run on a large-ish system that is otherwise idle,
     and the test isn't affined to a low-ish number of CPUs, the vCPU
     task can be repeatedly migrated to CPUs that are in deep sleep
     states, which results in the vCPU having very little net runtime
     before the next migration due to high wakeup latencies.

   - Define _GNU_SOURCE for all selftests to fix a warning that was
     introduced by a change to kselftest_harness.h late in the 6.9
     cycle, and because forcing every test to #define _GNU_SOURCE is
     painful.

   - Provide a global pseudo-RNG instance for all tests, so that library
     code can generate random, but determinstic numbers.

   - Use the global pRNG to randomly force emulation of select writes
     from guest code on x86, e.g. to help validate KVM's emulation of
     locked accesses.

   - Allocate and initialize x86's GDT, IDT, TSS, segments, and default
     exception handlers at VM creation, instead of forcing tests to
     manually trigger the related setup.

  Documentation:

   - Fix a goof in the KVM_CREATE_GUEST_MEMFD documentation"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (225 commits)
  selftests/kvm: remove dead file
  KVM: selftests: arm64: Test vCPU-scoped feature ID registers
  KVM: selftests: arm64: Test that feature ID regs survive a reset
  KVM: selftests: arm64: Store expected register value in set_id_regs
  KVM: selftests: arm64: Rename helper in set_id_regs to imply VM scope
  KVM: arm64: Only reset vCPU-scoped feature ID regs once
  KVM: arm64: Reset VM feature ID regs from kvm_reset_sys_regs()
  KVM: arm64: Rename is_id_reg() to imply VM scope
  KVM: arm64: Destroy mpidr_data for 'late' vCPU creation
  KVM: arm64: Use hVHE in pKVM by default on CPUs with VHE support
  KVM: arm64: Fix hvhe/nvhe early alias parsing
  KVM: SEV: Allow per-guest configuration of GHCB protocol version
  KVM: SEV: Add GHCB handling for termination requests
  KVM: SEV: Add GHCB handling for Hypervisor Feature Support requests
  KVM: SEV: Add support to handle AP reset MSR protocol
  KVM: x86: Explicitly zero kvm_caps during vendor module load
  KVM: x86: Fully re-initialize supported_mce_cap on vendor module load
  KVM: x86: Fully re-initialize supported_vm_types on vendor module load
  KVM: x86/mmu: Sanity check that __kvm_faultin_pfn() doesn't create noslot pfns
  KVM: x86/mmu: Initialize kvm_page_fault's pfn and hva to error values
  ...
 2024-05-15 14:46:43 -07:00
Linus Torvalds
a49468240e Modules changes for v6.10-rc1 
Finally something fun. Mike Rapoport does some cleanup to allow us to
 take out module_alloc() out of modules into a new paint shedded execmem_alloc()
 and execmem_free() so to make emphasis these helpers are actually used outside
 of modules. It starts with a no-functional changes API rename / placeholders
 to then allow architectures to define their requirements into a new shiny
 struct execmem_info with ranges, and requirements for those ranges. Archs
 now can intitialize this execmem_info as the last part of mm_core_init() if
 they have to diverge from the norm. Each range is a known type clearly
 articulated and spelled out in enum execmem_type.
 
 Although a lot of this is major cleanup and prep work for future enhancements an
 immediate clear gain is we get to enable KPROBES without MODULES now. That is
 ultimately what motiviated to pick this work up again, now with smaller goal as
 concrete stepping stone.
 
 This has been sitting on linux-next for a little less than a month, a few issues
 were found already and fixed, in particular an odd mips boot issue. Arch folks
 reviewed the code too. This is ready for wider exposure and testing.
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCgAwFiEENnNq2KuOejlQLZofziMdCjCSiKcFAmZDHfMSHG1jZ3JvZkBr
 ZXJuZWwub3JnAAoJEM4jHQowkoinfIwP/iFsr89v9BjWdRTqzufuHwjOxvFymWxU
 BbEpOppRny3CckDU9ag9hLIlUaSL1Bg56Zb+znzp5stKOoiQYMDBvjSYdfybPxW2
 mRS6SClMF1ubWbzdysdp5Ld9u8T0MQPCLX+P2pKhZRGi0wjkBf5WEkTje+muJKI3
 4vYkXS7bNhuTwRQ+EGfze4+AeleGdQJKDWFY00TW9mZTTBADjfHyYU5o0m9ijf5l
 3V/weUznODvjVJStbIF7wEQ845Ae02LN1zXfsloIOuBMhcMju+x8IjPgPbD0KhX2
 yA48q7mVWkirYp0L5GSQchtqV1GBiP0NK1xXWEpyx6EqQZ4RJCsQhlhjijoExYBR
 ylP4bqiGVuE3IN075X0OzGCnmOStuzwssfDmug0sMAZH/MvmOQ21WzZdet2nLMas
 wwJArHqZsBI9BnBlvH9ZM4Y9f1zC7iR1wULaNGwXLPx34X9PIch8Yk+RElP1kMFQ
 +YrjOuWPjl63pmSkrkk+Pe2eesMPcPB41M6Q2iCjDlp0iBp63LIx2XISUbTf0ljM
 EsI4ZQseYpx+BmC7AuQfmXvEOjuXII9z072/artVWcB2u/87ixIprnqZVhcs/spy
 73DnXB4ufor2PCCC5Xrb/6kT6G+PzF3VwTbHQ1D+fYZ5n2qdyG+LKxgXbtxsRVTp
 oUg+Z/AJaCMt
 =Nsg4
 -----END PGP SIGNATURE-----

Merge tag 'modules-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux

Pull modules updates from Luis Chamberlain:
 "Finally something fun. Mike Rapoport does some cleanup to allow us to
  take out module_alloc() out of modules into a new paint shedded
  execmem_alloc() and execmem_free() so to make emphasis these helpers
  are actually used outside of modules.

  It starts with a non-functional changes API rename / placeholders to
  then allow architectures to define their requirements into a new shiny
  struct execmem_info with ranges, and requirements for those ranges.

  Archs now can intitialize this execmem_info as the last part of
  mm_core_init() if they have to diverge from the norm. Each range is a
  known type clearly articulated and spelled out in enum execmem_type.

  Although a lot of this is major cleanup and prep work for future
  enhancements an immediate clear gain is we get to enable KPROBES
  without MODULES now. That is ultimately what motiviated to pick this
  work up again, now with smaller goal as concrete stepping stone"

* tag 'modules-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
  bpf: remove CONFIG_BPF_JIT dependency on CONFIG_MODULES of
  kprobes: remove dependency on CONFIG_MODULES
  powerpc: use CONFIG_EXECMEM instead of CONFIG_MODULES where appropriate
  x86/ftrace: enable dynamic ftrace without CONFIG_MODULES
  arch: make execmem setup available regardless of CONFIG_MODULES
  powerpc: extend execmem_params for kprobes allocations
  arm64: extend execmem_info for generated code allocations
  riscv: extend execmem_params for generated code allocations
  mm/execmem, arch: convert remaining overrides of module_alloc to execmem
  mm/execmem, arch: convert simple overrides of module_alloc to execmem
  mm: introduce execmem_alloc() and execmem_free()
  module: make module_memory_{alloc,free} more self-contained
  sparc: simplify module_alloc()
  nios2: define virtual address space for modules
  mips: module: rename MODULE_START to MODULES_VADDR
  arm64: module: remove unneeded call to kasan_alloc_module_shadow()
  kallsyms: replace deprecated strncpy with strscpy
  module: allow UNUSED_KSYMS_WHITELIST to be relative against objtree.
 2024-05-15 14:05:08 -07:00
Linus Torvalds
1b294a1f35 Networking changes for 6.10. 
Core & protocols
 ----------------
 
  - Complete rework of garbage collection of AF_UNIX sockets.
    AF_UNIX is prone to forming reference count cycles due to fd passing
    functionality. New method based on Tarjan's Strongly Connected Components
    algorithm should be both faster and remove a lot of workarounds
    we accumulated over the years.
 
  - Add TCP fraglist GRO support, allowing chaining multiple TCP packets
    and forwarding them together. Useful for small switches / routers which
    lack basic checksum offload in some scenarios (e.g. PPPoE).
 
  - Support using SMP threads for handling packet backlog i.e. packet
    processing from software interfaces and old drivers which don't
    use NAPI. This helps move the processing out of the softirq jumble.
 
  - Continue work of converting from rtnl lock to RCU protection.
    Don't require rtnl lock when reading: IPv6 routing FIB, IPv6 address
    labels, netdev threaded NAPI sysfs files, bonding driver's sysfs files,
    MPLS devconf, IPv4 FIB rules, netns IDs, tcp metrics, TC Qdiscs,
    neighbor entries, ARP entries via ioctl(SIOCGARP), a lot of the link
    information available via rtnetlink.
 
  - Small optimizations from Eric to UDP wake up handling, memory accounting,
    RPS/RFS implementation, TCP packet sizing etc.
 
  - Allow direct page recycling in the bulk API used by XDP, for +2% PPS.
 
  - Support peek with an offset on TCP sockets.
 
  - Add MPTCP APIs for querying last time packets were received/sent/acked,
    and whether MPTCP "upgrade" succeeded on a TCP socket.
 
  - Add intra-node communication shortcut to improve SMC performance.
 
  - Add IPv6 (and IPv{4,6}-over-IPv{4,6}) support to the GTP protocol driver.
 
  - Add HSR-SAN (RedBOX) mode of operation to the HSR protocol driver.
 
  - Add reset reasons for tracing what caused a TCP reset to be sent.
 
  - Introduce direction attribute for xfrm (IPSec) states.
    State can be used either for input or output packet processing.
 
 Things we sprinkled into general kernel code
 --------------------------------------------
 
  - Add bitmap_{read,write}(), bitmap_size(), expose BYTES_TO_BITS().
    This required touch-ups and renaming of a few existing users.
 
  - Add Endian-dependent __counted_by_{le,be} annotations.
 
  - Make building selftests "quieter" by printing summaries like
    "CC object.o" rather than full commands with all the arguments.
 
 Netfilter
 ---------
 
  - Use GFP_KERNEL to clone elements, to deal better with OOM situations
    and avoid failures in the .commit step.
 
 BPF
 ---
 
  - Add eBPF JIT for ARCv2 CPUs.
 
  - Support attaching kprobe BPF programs through kprobe_multi link in
    a session mode, meaning, a BPF program is attached to both function entry
    and return, the entry program can decide if the return program gets
    executed and the entry program can share u64 cookie value with return
    program. "Session mode" is a common use-case for tetragon and bpftrace.
 
  - Add the ability to specify and retrieve BPF cookie for raw tracepoint
    programs in order to ease migration from classic to raw tracepoints.
 
  - Add an internal-only BPF per-CPU instruction for resolving per-CPU
    memory addresses and implement support in x86, ARM64 and RISC-V JITs.
    This allows inlining functions which need to access per-CPU state.
 
  - Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
    atomics in bpf_arena which can be JITed as a single x86 instruction.
    Support BPF arena on ARM64.
 
  - Add a new bpf_wq API for deferring events and refactor process-context
    bpf_timer code to keep common code where possible.
 
  - Harden the BPF verifier's and/or/xor value tracking.
 
  - Introduce crypto kfuncs to let BPF programs call kernel crypto APIs.
 
  - Support bpf_tail_call_static() helper for BPF programs with GCC 13.
 
  - Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
    program to have code sections where preemption is disabled.
 
 Driver API
 ----------
 
  - Skip software TC processing completely if all installed rules are
    marked as HW-only, instead of checking the HW-only flag rule by rule.
 
  - Add support for configuring PoE (Power over Ethernet), similar to
    the already existing support for PoDL (Power over Data Line) config.
 
  - Initial bits of a queue control API, for now allowing a single queue
    to be reset without disturbing packet flow to other queues.
 
  - Common (ethtool) statistics for hardware timestamping.
 
 Tests and tooling
 -----------------
 
  - Remove the need to create a config file to run the net forwarding tests
    so that a naive "make run_tests" can exercise them.
 
  - Define a method of writing tests which require an external endpoint
    to communicate with (to send/receive data towards the test machine).
    Add a few such tests.
 
  - Create a shared code library for writing Python tests. Expose the YAML
    Netlink library from tools/ to the tests for easy Netlink access.
 
  - Move netfilter tests under net/, extend them, separate performance tests
    from correctness tests, and iron out issues found by running them
    "on every commit".
 
  - Refactor BPF selftests to use common network helpers.
 
  - Further work filling in YAML definitions of Netlink messages for:
    nftables, team driver, bonding interfaces, vlan interfaces, VF info,
    TC u32 mark, TC police action.
 
  - Teach Python YAML Netlink to decode attribute policies.
 
  - Extend the definition of the "indexed array" construct in the specs
    to cover arrays of scalars rather than just nests.
 
  - Add hyperlinks between definitions in generated Netlink docs.
 
 Drivers
 -------
 
  - Make sure unsupported flower control flags are rejected by drivers,
    and make more drivers report errors directly to the application rather
    than dmesg (large number of driver changes from Asbjørn Sloth Tønnesen).
 
  - Ethernet high-speed NICs:
    - Broadcom (bnxt):
      - support multiple RSS contexts and steering traffic to them
      - support XDP metadata
      - make page pool allocations more NUMA aware
    - Intel (100G, ice, idpf):
      - extract datapath code common among Intel drivers into a library
      - use fewer resources in switchdev by sharing queues with the PF
      - add PFCP filter support
      - add Ethernet filter support
      - use a spinlock instead of HW lock in PTP clock ops
      - support 5 layer Tx scheduler topology
    - nVidia/Mellanox:
      - 800G link modes and 100G SerDes speeds
      - per-queue IRQ coalescing configuration
    - Marvell Octeon:
      - support offloading TC packet mark action
 
  - Ethernet NICs consumer, embedded and virtual:
    - stop lying about skb->truesize in USB Ethernet drivers, it messes up
      TCP memory calculations
    - Google cloud vNIC:
      - support changing ring size via ethtool
      - support ring reset using the queue control API
    - VirtIO net:
      - expose flow hash from RSS to XDP
      - per-queue statistics
      - add selftests
    - Synopsys (stmmac):
      - support controllers which require an RX clock signal from the MII
        bus to perform their hardware initialization
    - TI:
      - icssg_prueth: support ICSSG-based Ethernet on AM65x SR1.0 devices
      - icssg_prueth: add SW TX / RX Coalescing based on hrtimers
      - cpsw: minimal XDP support
    - Renesas (ravb):
      - support describing the MDIO bus
    - Realtek (r8169):
      - add support for RTL8168M
    - Microchip Sparx5:
      - matchall and flower actions mirred and redirect
 
  - Ethernet switches:
    - nVidia/Mellanox:
      - improve events processing performance
    - Marvell:
      - add support for MV88E6250 family internal PHYs
    - Microchip:
      - add DCB and DSCP mapping support for KSZ switches
      - vsc73xx: convert to PHYLINK
    - Realtek:
      - rtl8226b/rtl8221b: add C45 instances and SerDes switching
 
  - Many driver changes related to PHYLIB and PHYLINK deprecated API cleanup.
 
  - Ethernet PHYs:
    - Add a new driver for Airoha EN8811H 2.5 Gigabit PHY.
    - micrel: lan8814: add support for PPS out and external timestamp trigger
 
  - WiFi:
    - Disable Wireless Extensions (WEXT) in all Wi-Fi 7 devices drivers.
      Modern devices can only be configured using nl80211.
    - mac80211/cfg80211
      - handle color change per link for WiFi 7 Multi-Link Operation
    - Intel (iwlwifi):
      - don't support puncturing in 5 GHz
      - support monitor mode on passive channels
      - BZ-W device support
      - P2P with HE/EHT support
      - re-add support for firmware API 90
      - provide channel survey information for Automatic Channel Selection
    - MediaTek (mt76):
      - mt7921 LED control
      - mt7925 EHT radiotap support
      - mt7920e PCI support
    - Qualcomm (ath11k):
      - P2P support for QCA6390, WCN6855 and QCA2066
      - support hibernation
      - ieee80211-freq-limit Device Tree property support
    - Qualcomm (ath12k):
      - refactoring in preparation of multi-link support
      - suspend and hibernation support
      - ACPI support
      - debugfs support, including dfs_simulate_radar support
    - RealTek:
      - rtw88: RTL8723CS SDIO device support
      - rtw89: RTL8922AE Wi-Fi 7 PCI device support
      - rtw89: complete features of new WiFi 7 chip 8922AE including
        BT-coexistence and Wake-on-WLAN
      - rtw89: use BIOS ACPI settings to set TX power and channels
      - rtl8xxxu: enable Management Frame Protection (MFP) support
 
  - Bluetooth:
    - support for Intel BlazarI and Filmore Peak2 (BE201)
    - support for MediaTek MT7921S SDIO
    - initial support for Intel PCIe BT driver
    - remove HCI_AMP support
 
 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmZD6sQACgkQMUZtbf5S
 IrtLYw/+I73ePGIye37o2jpbodcLAUZVfF3r6uYUzK8hokEcKD0QVJa9w7PizLZ3
 UO45ClOXFLJCkfP4reFenLfxGCel2AJI+F7VFl2xaO2XgrcH/lnVrHqKZEAEXjls
 KoYMnShIolv7h2MKP6hHtyTi2j1wvQUKsZC71o9/fuW+4fUT8gECx1YtYcL73wrw
 gEMdlUgBYC3jiiCUHJIFX6iPJ2t/TC+q1eIIF2K/Osrk2kIqQhzoozcL4vpuAZQT
 99ljx/qRelXa8oppDb7nM5eulg7WY8ZqxEfFZphTMC5nLEGzClxuOTTl2kDYI/D/
 UZmTWZDY+F5F0xvNk2gH84qVJXBOVDoobpT7hVA/tDuybobc/kvGDzRayEVqVzKj
 Q0tPlJs+xBZpkK5TVnxaFLJVOM+p1Xosxy3kNVXmuYNBvT/R89UbJiCrUKqKZF+L
 z/1mOYUv8UklHqYAeuJSptHvqJjTGa/fsEYP7dAUBbc1N2eVB8mzZ4mgU5rYXbtC
 E6UXXiWnoSRm8bmco9QmcWWoXt5UGEizHSJLz6t1R5Df/YmXhWlytll5aCwY1ksf
 FNoL7S4u7AZThL1Nwi7yUs4CAjhk/N4aOsk+41S0sALCx30BJuI6UdesAxJ0lu+Z
 fwCQYbs27y4p7mBLbkYwcQNxAxGm7PSK4yeyRIy2njiyV4qnLf8=
 =EsC2
 -----END PGP SIGNATURE-----

Merge tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core & protocols:

   - Complete rework of garbage collection of AF_UNIX sockets.

     AF_UNIX is prone to forming reference count cycles due to fd
     passing functionality. New method based on Tarjan's Strongly
     Connected Components algorithm should be both faster and remove a
     lot of workarounds we accumulated over the years.

   - Add TCP fraglist GRO support, allowing chaining multiple TCP
     packets and forwarding them together. Useful for small switches /
     routers which lack basic checksum offload in some scenarios (e.g.
     PPPoE).

   - Support using SMP threads for handling packet backlog i.e. packet
     processing from software interfaces and old drivers which don't use
     NAPI. This helps move the processing out of the softirq jumble.

   - Continue work of converting from rtnl lock to RCU protection.

     Don't require rtnl lock when reading: IPv6 routing FIB, IPv6
     address labels, netdev threaded NAPI sysfs files, bonding driver's
     sysfs files, MPLS devconf, IPv4 FIB rules, netns IDs, tcp metrics,
     TC Qdiscs, neighbor entries, ARP entries via ioctl(SIOCGARP), a lot
     of the link information available via rtnetlink.

   - Small optimizations from Eric to UDP wake up handling, memory
     accounting, RPS/RFS implementation, TCP packet sizing etc.

   - Allow direct page recycling in the bulk API used by XDP, for +2%
     PPS.

   - Support peek with an offset on TCP sockets.

   - Add MPTCP APIs for querying last time packets were received/sent/acked
     and whether MPTCP "upgrade" succeeded on a TCP socket.

   - Add intra-node communication shortcut to improve SMC performance.

   - Add IPv6 (and IPv{4,6}-over-IPv{4,6}) support to the GTP protocol
     driver.

   - Add HSR-SAN (RedBOX) mode of operation to the HSR protocol driver.

   - Add reset reasons for tracing what caused a TCP reset to be sent.

   - Introduce direction attribute for xfrm (IPSec) states. State can be
     used either for input or output packet processing.

  Things we sprinkled into general kernel code:

   - Add bitmap_{read,write}(), bitmap_size(), expose BYTES_TO_BITS().

     This required touch-ups and renaming of a few existing users.

   - Add Endian-dependent __counted_by_{le,be} annotations.

   - Make building selftests "quieter" by printing summaries like
     "CC object.o" rather than full commands with all the arguments.

  Netfilter:

   - Use GFP_KERNEL to clone elements, to deal better with OOM
     situations and avoid failures in the .commit step.

  BPF:

   - Add eBPF JIT for ARCv2 CPUs.

   - Support attaching kprobe BPF programs through kprobe_multi link in
     a session mode, meaning, a BPF program is attached to both function
     entry and return, the entry program can decide if the return
     program gets executed and the entry program can share u64 cookie
     value with return program. "Session mode" is a common use-case for
     tetragon and bpftrace.

   - Add the ability to specify and retrieve BPF cookie for raw
     tracepoint programs in order to ease migration from classic to raw
     tracepoints.

   - Add an internal-only BPF per-CPU instruction for resolving per-CPU
     memory addresses and implement support in x86, ARM64 and RISC-V
     JITs. This allows inlining functions which need to access per-CPU
     state.

   - Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
     atomics in bpf_arena which can be JITed as a single x86
     instruction. Support BPF arena on ARM64.

   - Add a new bpf_wq API for deferring events and refactor
     process-context bpf_timer code to keep common code where possible.

   - Harden the BPF verifier's and/or/xor value tracking.

   - Introduce crypto kfuncs to let BPF programs call kernel crypto
     APIs.

   - Support bpf_tail_call_static() helper for BPF programs with GCC 13.

   - Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
     program to have code sections where preemption is disabled.

  Driver API:

   - Skip software TC processing completely if all installed rules are
     marked as HW-only, instead of checking the HW-only flag rule by
     rule.

   - Add support for configuring PoE (Power over Ethernet), similar to
     the already existing support for PoDL (Power over Data Line)
     config.

   - Initial bits of a queue control API, for now allowing a single
     queue to be reset without disturbing packet flow to other queues.

   - Common (ethtool) statistics for hardware timestamping.

  Tests and tooling:

   - Remove the need to create a config file to run the net forwarding
     tests so that a naive "make run_tests" can exercise them.

   - Define a method of writing tests which require an external endpoint
     to communicate with (to send/receive data towards the test
     machine). Add a few such tests.

   - Create a shared code library for writing Python tests. Expose the
     YAML Netlink library from tools/ to the tests for easy Netlink
     access.

   - Move netfilter tests under net/, extend them, separate performance
     tests from correctness tests, and iron out issues found by running
     them "on every commit".

   - Refactor BPF selftests to use common network helpers.

   - Further work filling in YAML definitions of Netlink messages for:
     nftables, team driver, bonding interfaces, vlan interfaces, VF
     info, TC u32 mark, TC police action.

   - Teach Python YAML Netlink to decode attribute policies.

   - Extend the definition of the "indexed array" construct in the specs
     to cover arrays of scalars rather than just nests.

   - Add hyperlinks between definitions in generated Netlink docs.

  Drivers:

   - Make sure unsupported flower control flags are rejected by drivers,
     and make more drivers report errors directly to the application
     rather than dmesg (large number of driver changes from Asbjørn
     Sloth Tønnesen).

   - Ethernet high-speed NICs:
      - Broadcom (bnxt):
         - support multiple RSS contexts and steering traffic to them
         - support XDP metadata
         - make page pool allocations more NUMA aware
      - Intel (100G, ice, idpf):
         - extract datapath code common among Intel drivers into a library
         - use fewer resources in switchdev by sharing queues with the PF
         - add PFCP filter support
         - add Ethernet filter support
         - use a spinlock instead of HW lock in PTP clock ops
         - support 5 layer Tx scheduler topology
      - nVidia/Mellanox:
         - 800G link modes and 100G SerDes speeds
         - per-queue IRQ coalescing configuration
      - Marvell Octeon:
         - support offloading TC packet mark action

   - Ethernet NICs consumer, embedded and virtual:
      - stop lying about skb->truesize in USB Ethernet drivers, it
        messes up TCP memory calculations
      - Google cloud vNIC:
         - support changing ring size via ethtool
         - support ring reset using the queue control API
      - VirtIO net:
         - expose flow hash from RSS to XDP
         - per-queue statistics
         - add selftests
      - Synopsys (stmmac):
         - support controllers which require an RX clock signal from the
           MII bus to perform their hardware initialization
      - TI:
         - icssg_prueth: support ICSSG-based Ethernet on AM65x SR1.0 devices
         - icssg_prueth: add SW TX / RX Coalescing based on hrtimers
         - cpsw: minimal XDP support
      - Renesas (ravb):
         - support describing the MDIO bus
      - Realtek (r8169):
         - add support for RTL8168M
      - Microchip Sparx5:
         - matchall and flower actions mirred and redirect

   - Ethernet switches:
      - nVidia/Mellanox:
         - improve events processing performance
      - Marvell:
         - add support for MV88E6250 family internal PHYs
      - Microchip:
         - add DCB and DSCP mapping support for KSZ switches
         - vsc73xx: convert to PHYLINK
      - Realtek:
         - rtl8226b/rtl8221b: add C45 instances and SerDes switching

   - Many driver changes related to PHYLIB and PHYLINK deprecated API
     cleanup

   - Ethernet PHYs:
      - Add a new driver for Airoha EN8811H 2.5 Gigabit PHY.
      - micrel: lan8814: add support for PPS out and external timestamp trigger

   - WiFi:
      - Disable Wireless Extensions (WEXT) in all Wi-Fi 7 devices
        drivers. Modern devices can only be configured using nl80211.
      - mac80211/cfg80211
         - handle color change per link for WiFi 7 Multi-Link Operation
      - Intel (iwlwifi):
         - don't support puncturing in 5 GHz
         - support monitor mode on passive channels
         - BZ-W device support
         - P2P with HE/EHT support
         - re-add support for firmware API 90
         - provide channel survey information for Automatic Channel Selection
      - MediaTek (mt76):
         - mt7921 LED control
         - mt7925 EHT radiotap support
         - mt7920e PCI support
      - Qualcomm (ath11k):
         - P2P support for QCA6390, WCN6855 and QCA2066
         - support hibernation
         - ieee80211-freq-limit Device Tree property support
      - Qualcomm (ath12k):
         - refactoring in preparation of multi-link support
         - suspend and hibernation support
         - ACPI support
         - debugfs support, including dfs_simulate_radar support
      - RealTek:
         - rtw88: RTL8723CS SDIO device support
         - rtw89: RTL8922AE Wi-Fi 7 PCI device support
         - rtw89: complete features of new WiFi 7 chip 8922AE including
           BT-coexistence and Wake-on-WLAN
         - rtw89: use BIOS ACPI settings to set TX power and channels
         - rtl8xxxu: enable Management Frame Protection (MFP) support

   - Bluetooth:
      - support for Intel BlazarI and Filmore Peak2 (BE201)
      - support for MediaTek MT7921S SDIO
      - initial support for Intel PCIe BT driver
      - remove HCI_AMP support"

* tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1827 commits)
  selftests: netfilter: fix packetdrill conntrack testcase
  net: gro: fix napi_gro_cb zeroed alignment
  Bluetooth: btintel_pcie: Refactor and code cleanup
  Bluetooth: btintel_pcie: Fix warning reported by sparse
  Bluetooth: hci_core: Fix not handling hdev->le_num_of_adv_sets=1
  Bluetooth: btintel: Fix compiler warning for multi_v7_defconfig config
  Bluetooth: btintel_pcie: Fix compiler warnings
  Bluetooth: btintel_pcie: Add *setup* function to download firmware
  Bluetooth: btintel_pcie: Add support for PCIe transport
  Bluetooth: btintel: Export few static functions
  Bluetooth: HCI: Remove HCI_AMP support
  Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init()
  Bluetooth: qca: Fix error code in qca_read_fw_build_info()
  Bluetooth: hci_conn: Use __counted_by() and avoid -Wfamnae warning
  Bluetooth: btintel: Add support for Filmore Peak2 (BE201)
  Bluetooth: btintel: Add support for BlazarI
  LE Create Connection command timeout increased to 20 secs
  dt-bindings: net: bluetooth: Add MediaTek MT7921S SDIO Bluetooth
  Bluetooth: compute LE flow credits based on recvbuf space
  Bluetooth: hci_sync: Use cmd->num_cis instead of magic number
  ...
 2024-05-14 19:42:24 -07:00
Masahiro Yamada
7f7f6f7ad6 Makefile: remove redundant tool coverage variables 
Now Kbuild provides reasonable defaults for objtool, sanitizers, and
profilers.

Remove redundant variables.

Note:

This commit changes the coverage for some objects:

  - include arch/mips/vdso/vdso-image.o into UBSAN, GCOV, KCOV
  - include arch/sparc/vdso/vdso-image-*.o into UBSAN
  - include arch/sparc/vdso/vma.o into UBSAN
  - include arch/x86/entry/vdso/extable.o into KASAN, KCSAN, UBSAN, GCOV, KCOV
  - include arch/x86/entry/vdso/vdso-image-*.o into KASAN, KCSAN, UBSAN, GCOV, KCOV
  - include arch/x86/entry/vdso/vdso32-setup.o into KASAN, KCSAN, UBSAN, GCOV, KCOV
  - include arch/x86/entry/vdso/vma.o into GCOV, KCOV
  - include arch/x86/um/vdso/vma.o into KASAN, GCOV, KCOV

I believe these are positive effects because all of them are kernel
space objects.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Roberto Sassu <roberto.sassu@huawei.com>
 2024-05-14 23:35:48 +09:00
Mike Rapoport (IBM)
0cc2dc4902 arch: make execmem setup available regardless of CONFIG_MODULES 
execmem does not depend on modules, on the contrary modules use
execmem.

To make execmem available when CONFIG_MODULES=n, for instance for
kprobes, split execmem_params initialization out from
arch/*/kernel/module.c and compile it when CONFIG_EXECMEM=y

Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
 2024-05-14 00:31:44 -07:00
Mike Rapoport (IBM)
f6bec26c0a mm/execmem, arch: convert simple overrides of module_alloc to execmem 
Several architectures override module_alloc() only to define address
range for code allocations different than VMALLOC address space.

Provide a generic implementation in execmem that uses the parameters for
address space ranges, required alignment and page protections provided
by architectures.

The architectures must fill execmem_info structure and implement
execmem_arch_setup() that returns a pointer to that structure. This way the
execmem initialization won't be called from every architecture, but rather
from a central place, namely a core_initcall() in execmem.

The execmem provides execmem_alloc() API that wraps __vmalloc_node_range()
with the parameters defined by the architectures.  If an architecture does
not implement execmem_arch_setup(), execmem_alloc() will fall back to
module_alloc().

Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
 2024-05-14 00:31:43 -07:00
Binbin Zhou
7c33c9111c LoongArch: dts: Add new supported device nodes to Loongson-2K2000 
By now, more Loongson-2K2000 related drivers are supported, such as
clock controller and thermal controller. So we add these device nodes
to the Loongson-2K2000 dts file.

Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
 2024-05-14 12:24:24 +08:00
Binbin Zhou
bd7bc02b0c LoongArch: dts: Add new supported device nodes to Loongson-2K0500 
By now, more Loongson-2K0500 related drivers are supported, such as
clock controller, thermal controller, and dma controller. So we add
these device nodes to the Loongson-2K0500 dts file.

Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
 2024-05-14 12:24:18 +08:00
Binbin Zhou
3e4d599c1c LoongArch: dts: Remove "disabled" state of clock controller node 
Things like clock controllers or architectural interrupt controllers,
no one would disable them because otherwise they would have no usable
system. So we just "enabled" them by default.

Suggested-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
 2024-05-14 12:24:18 +08:00
WANG Rui
8f8d74ee11 LoongArch: rust: Switch to use built-in rustc target 
This commit switches to use the LoongArch's built-in rustc target
'loongarch64-unknown-none-softfloat'. The Rust samples have been tested.

Acked-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
 2024-05-14 12:24:18 +08:00
Huacai Chen
d6af2c7639 LoongArch: Fix callchain parse error with kernel tracepoint events again 
With commit d3119bc985 ("LoongArch: Fix callchain parse error with
kernel tracepoint events"), perf can parse kernel callchain, but not
complete and sometimes maybe error. The reason is LoongArch's unwinders
(guess, prologue and orc) don't really need fp (i.e., regs[22]), and
they use sp (i.e., regs[3]) as the frame address rather than the current
stack pointer.

Fix that by removing the assignment of regs[22], and instead assign the
__builtin_frame_address(0) to regs[3].

Without fix:

  Children      Self  Command        Shared Object      Symbol
  ........  ........  .............  .................  ................
  33.91%    33.91%    swapper        [kernel.vmlinux]   [k] __schedule
            |
            |--33.04%--__schedule
            |
             --0.87%--__arch_cpu_idle
                       __schedule

With this fix:

  Children      Self  Command        Shared Object      Symbol
  ........  ........  .............  .................  ................
  31.16%    31.16%    swapper        [kernel.vmlinux]   [k] __schedule
            |
            |--20.63%--smpboot_entry
            |          cpu_startup_entry
            |          schedule_idle
            |          __schedule
            |
             --10.53%--start_kernel
                       cpu_startup_entry
                       schedule_idle
                       __schedule

Fixes: d3119bc985 ("LoongArch: Fix callchain parse error with kernel tracepoint events")
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
 2024-05-14 12:24:18 +08:00
Tiezhu Yang
5685d7fcb5 LoongArch: Give a chance to build with !CONFIG_SMP 
In the current code, SMP is selected in Kconfig for LoongArch, the users
can not unset it, this is reasonable for a multi-processor machine. But
as the help info of config SMP said, if you have a system with only one
CPU, say N. On a uni-processor machine, the kernel will run faster if you
say N here.

Loongson-2K0500 is a single-core CPU for applications like industrial
control, printing terminals, and BMC (Baseboard Management Controller),
there are many development boards, products and solutions on the market,
so it is better and necessary to give a chance to build with !CONFIG_SMP
for a uni-processor machine.

First of all, do not select SMP for config LOONGARCH in Kconfig to make
it possible to unset CONFIG_SMP. Then, do some changes to fix warnings
and errors if CONFIG_SMP is not set.

(1) Define get_ipi_irq() only if CONFIG_SMP is set to fix the warning:
arch/loongarch/kernel/irq.c:90:19: warning: 'get_ipi_irq' defined but not used [-Wunused-function]

(2) Add "#ifdef CONFIG_SMP" in asm/smp.h to fix the warning:
./arch/loongarch/include/asm/smp.h:49:9: warning: "raw_smp_processor_id" redefined
   49 | #define raw_smp_processor_id raw_smp_processor_id
      |         ^~~~~~~~~~~~~~~~~~~~
./include/linux/smp.h:198:9: note: this is the location of the previous definition
  198 | #define raw_smp_processor_id()                  0

(3) Define machine_shutdown() as empty under !CONFIG_SMP to fix the error:
arch/loongarch/kernel/machine_kexec.c: In function 'machine_shutdown':
arch/loongarch/kernel/machine_kexec.c:233:25: error: implicit declaration of function 'cpu_device_up'; did you mean 'put_device'? [-Wimplicit-function-declaration]

(4) Make config SCHED_SMT depends on SMP to fix many errors such as:
kernel/sched/core.c: In function 'sched_core_find':
kernel/sched/core.c:310:43: error: 'struct rq' has no member named 'cpu'

(5) Define cpu_logical_map(cpu) as 0 under !CONFIG_SMP in asm/smp.h,
then include asm/smp.h in asm/acpi.h (because acpi.h is included in
linux/irq.h indirectly) to fix many build errors under drivers/irqchip
such as:
drivers/irqchip/irq-loongson-eiointc.c: In function 'cpu_to_eio_node':
drivers/irqchip/irq-loongson-eiointc.c:59:16: error: implicit declaration of function 'cpu_logical_map' [-Wimplicit-function-declaration]

(6) Do not write per_cpu_offset(0) to PERCPU_BASE_KS when resume because
the per_cpu_offset(x) macro is defined as (__per_cpu_offset[x]) only
under CONFIG_SMP in include/asm-generic/percpu.h. Just save the value of
PERCPU_BASE_KS when suspend and restore it when resume to fix the error:
arch/loongarch/power/suspend.c: In function 'loongarch_common_resume':
arch/loongarch/power/suspend.c:47:21: error: implicit declaration of function 'per_cpu_offset' [-Wimplicit-function-declaration]

(7) Fix huge page handling under !CONFIG_SMP in tlbex.S.

When running the UnixBench tests with "-c 1" single-streamed pass, the
improvement of performance is about 9 percent with this patch.

By the way, it is helpful to debug and analysis the kernel issues of
multi-processor system under !CONFIG_SMP.

Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
 2024-05-14 12:24:18 +08:00
Huacai Chen
ff4a2443ef LoongArch: Select THP_SWAP if HAVE_ARCH_TRANSPARENT_HUGEPAGE 
THP_SWAP has been proven to improve the swap throughput significantly on
x86_64 system according to commit bd4c82c22c ("mm, THP, swap: delay
splitting THP after swapped out"), on ARM64 system according to commit
d0637c505f ("arm64: enable THP_SWAP for arm64") and on RISC-V system
according to commit 87f81e66e2 ("riscv: enable THP_SWAP for RV64").

Enable THP_SWAP for LoongArch, testing the micro-benchmark which is
introduced by commit d0637c505f ("arm64: enable THP_SWAP for arm64")
shows below numbers on the Loongson-3A5000 board:

swp out bandwidth w/o patch: 1815716 bytes/ms (mean of 10 tests)
swp out bandwidth w/  patch: 3410003 bytes/ms (mean of 10 tests)

Improved by 46.75%!

Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
 2024-05-14 12:24:18 +08:00
Huacai Chen
d0b35b0247 LoongArch: Select ARCH_WANT_DEFAULT_BPF_JIT 
BPF JIT has better performance and more secure than BPF interpreter, so
enable it by default, as most other architectures done.

Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
 2024-05-14 12:24:18 +08:00
Xi Ruoyao
5125d033c8 LoongArch: Select ARCH_SUPPORTS_INT128 if CC_HAS_INT128 
This allows compiling a full 128-bit product of two 64-bit integers as a
mul/mulh pair, instead of a nasty long sequence of 20+ instructions.

However, after selecting ARCH_SUPPORTS_INT128, when optimizing for size
the compiler generates calls to __ashlti3, __ashrti3, and __lshrti3 for
shifting __int128 values, causing a link failure:

    loongarch64-unknown-linux-gnu-ld: kernel/sched/fair.o: in
    function `mul_u64_u32_shr':
    <PATH>/include/linux/math64.h:161:(.text+0x5e4): undefined
    reference to `__lshrti3'

So provide the implementation of these functions if ARCH_SUPPORTS_INT128.

Closes: https://lore.kernel.org/loongarch/CAAhV-H5EZ=7OF7CSiYyZ8_+wWuenpo=K2WT8-6mAT4CvzUC_4g@mail.gmail.com/
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
 2024-05-14 12:24:18 +08:00
Xi Ruoyao
2cce905959 LoongArch: Select ARCH_HAS_FAST_MULTIPLIER 
LA464 and LA664 can do 32-bit/64-bit integer multiplication with a
latency of 4 cycles and a throughput of 2 ops per cycle.  It is
comparable to the mainstream x86 and arm64 cores, so we can select
ARCH_HAS_FAST_MULTIPLIER like them.

It speeds up __sw_hweight32() in lib/hweight.c for about 14% on LA464
and 11% on LA664, while __sw_hweight64() for about 30% on LA464 and 33%
on LA664.

Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
 2024-05-14 12:24:18 +08:00
Linus Torvalds
0c9f4ac808 for-6.10/block-20240511 
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmY/YgsQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpvi0EACwnFRtYioizBH0x7QUHTBcIr0IhACd5gfz
 bm+uwlDUtf6G6lupHdJT9gOVB2z2z1m2Pz//8RuUVWw3Eqw2+rfgG8iJd+yo7IaV
 DpX3WaM4NnBvB7FKOKHlMPvGuf7KgbZ3uPm3x8cbrn/axMmkZ6ljxTixJ3p5t4+s
 xRsef/lVdG71DkXIFgTKATB86yNRJNlRQTbL+sZW22vdXdtfyBbOgR1sBuFfp7Hd
 g/uocZM/z0ahM6JH/5R2IX2ttKXMIBZLA8HRkJdvYqg022cj4js2YyRCPU3N6jQN
 MtN4TpJV5I++8l6SPQOOhaDNrK/6zFtDQpwG0YBiKKj3nQDgVbWWb8ejYTIUv4MP
 SrEto4MVBEqg5N65VwYYhIf45rmueFyJp6z0Vqv6Owur5nuww/YIFknmoMa/WDMd
 V8dIU3zL72FZDbPjIBjxHeqAGz9OgzEVafled7pi0Xbw6wqiB4kZihlMGXlD+WBy
 Yd6xo8PX4i5+d2LLKKPxpW1X0eJlKYJ/4dnYCoFN8LmXSiPJnMx2pYrV+NqMxy4X
 Thr8lxswLQC7j9YBBuIeDl8NB9N5FZZLvaC6I25QKq045M2ckJ+VrounsQb3vGwJ
 72nlxxBZL8wz3sasgX9Pc1Cez9AqYbM+UZahq8ezPY5y3Jh0QfRw/MOk1ZaDNC8V
 CNOHBH0E+Q==
 =HnjE
 -----END PGP SIGNATURE-----

Merge tag 'for-6.10/block-20240511' of git://git.kernel.dk/linux

Pull block updates from Jens Axboe:

 - Add a partscan attribute in sysfs, fixing an issue with systemd
   relying on an internal interface that went away.

 - Attempt #2 at making long running discards interruptible. The
   previous attempt went into 6.9, but we ended up mostly reverting it
   as it had issues.

 - Remove old ida_simple API in bcache

 - Support for zoned write plugging, greatly improving the performance
   on zoned devices.

 - Remove the old throttle low interface, which has been experimental
   since 2017 and never made it beyond that and isn't being used.

 - Remove page->index debugging checks in brd, as it hasn't caught
   anything and prepares us for removing in struct page.

 - MD pull request from Song

 - Don't schedule block workers on isolated CPUs

* tag 'for-6.10/block-20240511' of git://git.kernel.dk/linux: (84 commits)
  blk-throttle: delay initialization until configuration
  blk-throttle: remove CONFIG_BLK_DEV_THROTTLING_LOW
  block: fix that util can be greater than 100%
  block: support to account io_ticks precisely
  block: add plug while submitting IO
  bcache: fix variable length array abuse in btree_iter
  bcache: Remove usage of the deprecated ida_simple_xx() API
  md: Revert "md: Fix overflow in is_mddev_idle"
  blk-lib: check for kill signal in ioctl BLKDISCARD
  block: add a bio_await_chain helper
  block: add a blk_alloc_discard_bio helper
  block: add a bio_chain_and_submit helper
  block: move discard checks into the ioctl handler
  block: remove the discard_granularity check in __blkdev_issue_discard
  block/ioctl: prefer different overflow check
  null_blk: Fix the WARNING: modpost: missing MODULE_DESCRIPTION()
  block: fix and simplify blkdevparts= cmdline parsing
  block: refine the EOF check in blkdev_iomap_begin
  block: add a partscan sysfs attribute for disks
  block: add a disk_has_partscan helper
  ...
 2024-05-13 13:03:54 -07:00
Joerg Roedel
2bd5059c6c Merge branches 'arm/renesas', 'arm/smmu', 'x86/amd', 'core' and 'x86/vt-d' into next 2024-05-13 14:06:54 +02:00
Paolo Bonzini
4232da23d7 Merge tag 'loongarch-kvm-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD 
LoongArch KVM changes for v6.10

1. Add ParaVirt IPI support.
2. Add software breakpoint support.
3. Add mmio trace events support.
 2024-05-10 13:20:18 -04:00
Masahiro Yamada
b1992c3772 kbuild: use $(src) instead of $(srctree)/$(src) for source directory 
Kbuild conventionally uses $(obj)/ for generated files, and $(src)/ for
checked-in source files. It is merely a convention without any functional
difference. In fact, $(obj) and $(src) are exactly the same, as defined
in scripts/Makefile.build:

    src := $(obj)

When the kernel is built in a separate output directory, $(src) does
not accurately reflect the source directory location. While Kbuild
resolves this discrepancy by specifying VPATH=$(srctree) to search for
source files, it does not cover all cases. For example, when adding a
header search path for local headers, -I$(srctree)/$(src) is typically
passed to the compiler.

This introduces inconsistency between upstream and downstream Makefiles
because $(src) is used instead of $(srctree)/$(src) for the latter.

To address this inconsistency, this commit changes the semantics of
$(src) so that it always points to the directory in the source tree.

Going forward, the variables used in Makefiles will have the following
meanings:

  $(obj)     - directory in the object tree
  $(src)     - directory in the source tree  (changed by this commit)
  $(objtree) - the top of the kernel object tree
  $(srctree) - the top of the kernel source tree

Consequently, $(srctree)/$(src) in upstream Makefiles need to be replaced
with $(src).

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
 2024-05-10 04:34:52 +09:00
Yu Kuai
bf20ab538c blk-throttle: remove CONFIG_BLK_DEV_THROTTLING_LOW 
One the one hand, it's marked EXPERIMENTAL since 2017, and looks like
there are no users since then, and no testers and no developers, it's
just not active at all.

On the other hand, even if the config is disabled, there are still many
fields in throtl_grp and throtl_data and many functions that are only
used for throtl low.

At last, currently blk-throtl is initialized during disk initialization,
and destroyed during disk removal, and it exposes many functions to be
called directly from block layer.

Remove throtl low to make code much more cleaner and follow up work much
easier.

Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20240509121107.3195568-2-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
 2024-05-09 09:44:55 -06:00
Bibo Mao
7b7e584f90 LoongArch: KVM: Add mmio trace events support 
Add mmio trace events support, currently generic mmio events
KVM_TRACE_MMIO_WRITE/xxx_READ/xx_READ_UNSATISFIED are added here.

Also vcpu id field is added for all kvm trace events, since perf
KVM tool parses vcpu id information for kvm entry event.

Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
 2024-05-06 22:00:47 +08:00
Bibo Mao
163e9fc695 LoongArch: KVM: Add software breakpoint support 
When VM runs in kvm mode, system will not exit to host mode when
executing a general software breakpoint instruction such as INSN_BREAK,
trap exception happens in guest mode rather than host mode. In order to
debug guest kernel on host side, one mechanism should be used to let VM
exit to host mode.

Here a hypercall instruction with a special code is used for software
breakpoint usage. VM exits to host mode and kvm hypervisor identifies
the special hypercall code and sets exit_reason with KVM_EXIT_DEBUG. And
then let qemu handle it.

Idea comes from ppc kvm, one api KVM_REG_LOONGARCH_DEBUG_INST is added
to get the hypercall code. VMM needs get sw breakpoint instruction with
this api and set the corresponding sw break point for guest kernel.

Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
 2024-05-06 22:00:47 +08:00
Bibo Mao
74c16b2e2b LoongArch: KVM: Add PV IPI support on guest side 
PARAVIRT config option and PV IPI is added for the guest side, function
pv_ipi_init() is used to add IPI sending and IPI receiving hooks. This
function firstly checks whether system runs in VM mode, and if kernel
runs in VM mode, it will call function kvm_para_available() to detect
the current hypervirsor type (now only KVM type detection is supported).
The paravirt functions can work only if current hypervisor type is KVM,
since there is only KVM supported on LoongArch now.

PV IPI uses virtual IPI sender and virtual IPI receiver functions. With
virtual IPI sender, IPI message is stored in memory rather than emulated
HW. IPI multicast is also supported, and 128 vcpus can received IPIs
at the same time like X86 KVM method. Hypercall method is used for IPI
sending.

With virtual IPI receiver, HW SWI0 is used rather than real IPI HW.
Since VCPU has separate HW SWI0 like HW timer, there is no trap in IPI
interrupt acknowledge. Since IPI message is stored in memory, there is
no trap in getting IPI message.

Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
 2024-05-06 22:00:47 +08:00
Bibo Mao
e33bda7ee5 LoongArch: KVM: Add PV IPI support on host side 
On LoongArch system, IPI hw uses iocsr registers. There are one iocsr
register access on IPI sending, and two iocsr access on IPI receiving
for the IPI interrupt handler. In VM mode all iocsr accessing will cause
VM to trap into hypervisor. So with one IPI hw notification there will
be three times of trap.

In this patch PV IPI is added for VM, hypercall instruction is used for
IPI sender, and hypervisor will inject an SWI to the destination vcpu.
During the SWI interrupt handler, only CSR.ESTAT register is written to
clear irq. CSR.ESTAT register access will not trap into hypervisor, so
with PV IPI supported, there is one trap with IPI sender, and no trap
with IPI receiver, there is only one trap with IPI notification.

Also this patch adds IPI multicast support, the method is similar with
x86. With IPI multicast support, IPI notification can be sent to at
most 128 vcpus at one time. It greatly reduces the times of trapping
into hypervisor.

Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
 2024-05-06 22:00:47 +08:00
Bibo Mao
73516e9da5 LoongArch: KVM: Add vcpu mapping from physical cpuid 
Physical CPUID is used for interrupt routing for irqchips such as ipi,
msgint and eiointc interrupt controllers. Physical CPUID is stored at
the CSR register LOONGARCH_CSR_CPUID, it can not be changed once vcpu
is created and the physical CPUIDs of two vcpus cannot be the same.

Different irqchips have different size declaration about physical CPUID,
the max CPUID value for CSR LOONGARCH_CSR_CPUID on Loongson-3A5000 is
512, the max CPUID supported by IPI hardware is 1024, while for eiointc
irqchip is 256, and for msgint irqchip is 65536.

The smallest value from all interrupt controllers is selected now, and
the max cpuid size is defines as 256 by KVM which comes from the eiointc
irqchip.

Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
 2024-05-06 22:00:47 +08:00
Bibo Mao
9753d30379 LoongArch: KVM: Add cpucfg area for kvm hypervisor 
Instruction cpucfg can be used to get processor features. And there
is a trap exception when it is executed in VM mode, and also it can be
used to provide cpu features to VM. On real hardware cpucfg area 0 - 20
is used by now. Here one specified area 0x40000000 -- 0x400000ff is used
for KVM hypervisor to provide PV features, and the area can be extended
for other hypervisors in future. This area will never be used for real
HW, it is only used by software.

Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
 2024-05-06 22:00:47 +08:00
Bibo Mao
372631bb62 LoongArch: KVM: Add hypercall instruction emulation 
On LoongArch system, there is a hypercall instruction special for
virtualization. When system executes this instruction on host side,
there is an illegal instruction exception reported, however it will
trap into host when it is executed in VM mode.

When hypercall is emulated, A0 register is set with value
KVM_HCALL_INVALID_CODE, rather than inject EXCCODE_INE invalid
instruction exception. So VM can continue to executing the next code.

Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
 2024-05-06 22:00:46 +08:00
Bibo Mao
316863cb62 LoongArch/smp: Refine some ipi functions on LoongArch platform 
Refine the ipi handling on LoongArch platform, there are three
modifications:

1. Add generic function get_percpu_irq(), replacing some percpu irq
functions such as get_ipi_irq()/get_pmc_irq()/get_timer_irq() with
get_percpu_irq().

2. Change definition about parameter action called by function
loongson_send_ipi_single() and loongson_send_ipi_mask(), and it is
defined as decimal encoding format at ipi sender side. Normal decimal
encoding is used rather than binary bitmap encoding for ipi action, ipi
hw sender uses decimal encoding code, and ipi receiver will get binary
bitmap encoding, the ipi hw will convert it into bitmap in ipi message
buffer.

3. Add a structure smp_ops on LoongArch platform so that pv ipi can be
used later.

Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
 2024-05-06 22:00:46 +08:00
Thomas Zimmermann
2fd001cd36
arch: Rename fbdev header and source files 
The per-architecture fbdev code has no dependencies on fbdev and can
be used for any video-related subsystem. Rename the files to 'video'.
Use video-sti.c on parisc as the source file depends on CONFIG_STI_CORE.

On arc, arm, arm64, sh, and um the asm header file is an empty wrapper
around the file in asm-generic. Let Kbuild generate the file. The build
system does this automatically. Only um needs to generate video.h
explicitly, so that it overrides the host architecture's header. The
latter would otherwise interfere with the build.

Further update all includes statements, include guards, and Makefiles.
Also update a few strings and comments to refer to video instead of
fbdev.

v3:
- arc, arm, arm64, sh: generate asm header via build system (Sam,
Helge, Arnd)
- um: rename fb.h to video.h
- fix typo in commit message (Sam)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: x86@kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2024-05-03 17:07:50 +02:00
Jakub Kicinski
e958da0ddb Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 
Cross-merge networking fixes after downstream PR.

Conflicts:

include/linux/filter.h
kernel/bpf/core.c
  66e13b615a ("bpf: verifier: prevent userspace memory access")
  d503a04f8b ("bpf: Add support for certain atomics in bpf_arena to x86 JIT")
https://lore.kernel.org/all/20240429114939.210328b0@canb.auug.org.au/

No adjacent changes.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 2024-05-02 12:06:25 -07:00
Robin Murphy
fece6530bf dma-mapping: Add helpers for dma_range_map bounds 
Several places want to compute the lower and/or upper bounds of a
dma_range_map, so let's factor that out into reusable helpers.

Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com> # For arm64
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/45ec52f033ec4dfb364e23f48abaf787f612fa53.1713523152.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
 2024-04-26 12:07:24 +02:00
David Hildenbrand
25176ad09c mm/treewide: rename CONFIG_HAVE_FAST_GUP to CONFIG_HAVE_GUP_FAST 
Nowadays, we call it "GUP-fast", the external interface includes functions
like "get_user_pages_fast()", and we renamed all internal functions to
reflect that as well.

Let's make the config option reflect that.

Link: https://lkml.kernel.org/r/20240402125516.223131-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
 2024-04-25 20:56:41 -07:00
Rick Edgecombe
b80fa3cbb7 treewide: use initializer for struct vm_unmapped_area_info 
Future changes will need to add a new member to struct
vm_unmapped_area_info.  This would cause trouble for any call site that
doesn't initialize the struct.  Currently every caller sets each member
manually, so if new ones are added they will be uninitialized and the core
code parsing the struct will see garbage in the new member.

It could be possible to initialize the new member manually to 0 at each
call site.  This and a couple other options were discussed.  Having some
struct vm_unmapped_area_info instances not zero initialized will put those
sites at risk of feeding garbage into vm_unmapped_area(), if the
convention is to zero initialize the struct and any new field addition
missed a call site that initializes each field manually.  So it is useful
to do things similar across the kernel.

The consensus (see links) was that in general the best way to accomplish
taking into account both code cleanliness and minimizing the chance of
introducing bugs, was to do C99 static initialization.  As in: struct
vm_unmapped_area_info info = {};

With this method of initialization, the whole struct will be zero
initialized, and any statements setting fields to zero will be unneeded. 
The change should not leave cleanup at the call sides.

While iterating though the possible solutions a few archs kindly acked
other variations that still zero initialized the struct.  These sites have
been modified in previous changes using the pattern acked by the
respective arch.

So to be reduce the chance of bugs via uninitialized fields, perform a
tree wide change using the consensus for the best general way to do this
change.  Use C99 static initializing to zero the struct and remove and
statements that simply set members to zero.

Link: https://lkml.kernel.org/r/20240326021656.202649-11-rick.p.edgecombe@intel.com
Link: https://lore.kernel.org/lkml/202402280912.33AEE7A9CF@keescook/#t
Link: https://lore.kernel.org/lkml/j7bfvig3gew3qruouxrh7z7ehjjafrgkbcmg6tcghhfh3rhmzi@wzlcoecgy5rs/
Link: https://lore.kernel.org/lkml/ec3e377a-c0a0-4dd3-9cb9-96517e54d17e@csgroup.eu/
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Deepak Gupta <debug@rivosinc.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: H. Peter Anvin (Intel) <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
 2024-04-25 20:56:27 -07:00