CONFIG_CORESIGHT_SOURCE_ETM4X is undefined when built as module,
CONFIG_CORESIGHT_SOURCE_ETM4X_MODULE is defined instead.
Therefore code in format_attr_contextid_show() not correctly complied
when coresight built as module.
Use IS_ENABLED(CONFIG_CORESIGHT_SOURCE_ETM4X) to correct this.
Link: https://lore.kernel.org/r/20210414194808.22872-1-mike.leach@linaro.org
Fixes: 88f11864cf ("coresight: etm-perf: Support PID tracing for kernel at EL2")
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210415202404.945368-2-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It appears that the STM code didn't manage to accurately decypher the
delicate inner workings of an alternative thought process behind the
UUID API and directly called generate_random_uuid() that clearly needs
to be a static function in lib/uuid.c.
At the same time, said STM code is poking directly at the byte array
inside the uuid_t when it uses the UUID for its internal purposes.
Fix these two transgressions by using intended APIs instead.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[ash: changed back to uuid_t and updated the commit message]
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Link: https://lore.kernel.org/r/20210415091555.88085-1-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This adds support for the Trace Hub in Rocket Lake CPUs.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable <stable@vger.kernel.org> # v4.14+
Link: https://lore.kernel.org/r/20210414171251.14672-7-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The only usage of them is to pass their address to sysfs_create_group()
and sysfs_remove_group(), both which have pointers to const
attribute_group structs as input. Make them const to allow the compiler
to put them in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210414171251.14672-5-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anything that deals with drvdata structures should leave them intact.
Reflect this in function signatures.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210414171251.14672-4-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In case of error, the function devm_kasprintf() returns NULL
pointer not ERR_PTR(). The IS_ERR() test in the return value
check should be replaced with NULL test.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20210409094901.1903622-1-weiyongjun1@huawei.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The sparse tool complains as follows:
drivers/hwtracing/coresight/coresight-core.c:26:1: warning:
symbol '__pcpu_scope_csdev_sink' was not declared. Should it be static?
As csdev_sink is not used outside of coresight-core.c after the
introduction of coresight_[set|get]_percpu_sink() helpers, this
change marks it static.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20210409094900.1902783-1-weiyongjun1@huawei.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The sparse tool complains as follows:
drivers/hwtracing/coresight/coresight-etm-perf.c:61:25: warning:
symbol 'format_attr_contextid' was not declared. Should it be static?
This symbol is not used outside of coresight-etm-perf.c, so this
commit marks it static.
Link: https://lore.kernel.org/r/20210308123250.2417947-1-weiyongjun1@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20210407160007.418053-3-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Trace Buffer Extension (TRBE) implements a trace buffer per CPU which is
accessible via the system registers. The TRBE supports different addressing
modes including CPU virtual address and buffer modes including the circular
buffer mode. The TRBE buffer is addressed by a base pointer (TRBBASER_EL1),
an write pointer (TRBPTR_EL1) and a limit pointer (TRBLIMITR_EL1). But the
access to the trace buffer could be prohibited by a higher exception level
(EL3 or EL2), indicated by TRBIDR_EL1.P. The TRBE can also generate a CPU
private interrupt (PPI) on address translation errors and when the buffer
is full. Overall implementation here is inspired from the Arm SPE driver.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
[ Mark the buffer truncated on WRAP event, error code cleanup ]
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20210405164307.1720226-18-suzuki.poulose@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Add support for dedicated sinks that are bound to individual CPUs. (e.g,
TRBE). To allow quicker access to the sink for a given CPU bound source,
keep a percpu array of the sink devices. Also, add support for building
a path to the CPU local sink from the ETM.
This adds a new percpu sink type CORESIGHT_DEV_SUBTYPE_SINK_PERCPU_SYSMEM.
This new sink type is exclusively available and can only work with percpu
source type device CORESIGHT_DEV_SUBTYPE_SOURCE_PROC.
This defines a percpu structure that accommodates a single coresight_device
which can be used to store an initialized instance from a sink driver. As
these sinks are exclusively linked and dependent on corresponding percpu
sources devices, they should also be the default sink device during a perf
session.
Outwards device connections are scanned while establishing paths between a
source and a sink device. But such connections are not present for certain
percpu source and sink devices which are exclusively linked and dependent.
Build the path directly and skip connection scanning for such devices.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Tested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
[Moved the set/get percpu sink APIs from TRBE patch to here
Fixed build break on arm32]
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20210405164307.1720226-17-suzuki.poulose@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The context associated with an ETM for a given perf event
includes :
- handle -> the perf output handle for the AUX buffer.
- the path for the trace components
- the buffer config for the sink.
The path and the buffer config are part of the "aux_priv" data
(etm_event_data) setup by the setup_aux() callback, and made available
via perf_get_aux(handle).
Now with a sink supporting IRQ, the sink could "end" an output
handle when the buffer reaches the programmed limit and would try
to restart a handle. This could fail if there is not enough
space left the AUX buffer (e.g, the userspace has not consumed
the data). This leaves the "handle" disconnected from the "event"
and also the "perf_get_aux()" cleared. This all happens within
the sink driver, without the etm_perf driver being aware.
Now when the event is actually stopped, etm_event_stop()
will need to access the "event_data". But since the handle
is not valid anymore, we loose the information to stop the
"trace" path. So, we need a reliable way to access the etm_event_data
even when the handle may not be active.
This patch replaces the per_cpu handle array with a per_cpu context
for the ETM, which tracks the "handle" as well as the "etm_event_data".
The context notes the etm_event_data at etm_event_start() and clears
it at etm_event_stop(). This makes sure that we don't access a
stale "etm_event_data" as we are guaranteed that it is not
freed by free_aux() as long as the event is active and tracing,
also provides us with access to the critical information
needed to wind up a session even in the absence of an active
output_handle.
This is not an issue for the legacy sinks as none of them supports
an IRQ and is centrally handled by the etm-perf.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20210405164307.1720226-16-suzuki.poulose@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Add ETE as one of the supported device types we support
with ETM4x driver. The devices are named following the
existing convention as ete<N>.
ETE mandates that the trace resource status register is programmed
before the tracing is turned on. For the moment simply write to
it indicating TraceActive.
Cc: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20210405164307.1720226-14-suzuki.poulose@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Add support for handling the system registers for Embedded Trace
Extensions (ETE). ETE shares most of the registers with ETMv4 except
for some and also adds some new registers. Re-arrange the ETMv4x list
to share the common definitions and add the ETE sysreg support.
Cc: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20210405164307.1720226-13-suzuki.poulose@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
ETE may not implement the OS lock and instead could rely on
the PE OS Lock for the trace unit access. This is indicated
by the TRCOLSR.OSM == 0b100. Add support for handling the
PE OS lock
Cc: Mike Leach <mike.leach@linaro.org>
Reviewed-by: mike.leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20210405164307.1720226-12-suzuki.poulose@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
If a graph node is not found for a given node, of_get_next_endpoint()
will emit the following error message :
OF: graph: no port node found in /<node_name>
If the given component doesn't have any explicit connections (e.g,
ETE) we could simply ignore the graph parsing. As for any legacy
component where this is mandatory, the device will not be usable
as before this patch. Updating the DT bindings to Yaml and enabling
the schema checks can detect such issues with the DT.
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20210405164307.1720226-11-suzuki.poulose@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
When a sink is not specified by the user, the etm perf driver
finds a suitable sink automatically, based on the first ETM
where this event could be scheduled. Then we allocate the
sink buffer based on the selected sink. This is fine for a
CPU bound event as the "sink" is always guaranteed to be
reachable from the ETM (as this is the only ETM where the
event is going to be scheduled). However, if we have a thread
bound event, the event could be scheduled on any of the ETMs
on the system. In this case, currently we automatically select
a sink and exclude any ETMs that cannot reach the selected
sink. This is problematic especially for 1x1 configurations.
We end up in tracing the event only on the "first" ETM,
as the default sink is local to the first ETM and unreachable
from the rest. However, we could allow the other ETMs to
trace if they all have a sink that is compatible with the
"selected" sink and can use the sink buffer. This can be
easily done by verifying that they are all driven by the
same driver and matches the same subtype. Please note
that at anytime there can be only one ETM tracing the event.
Adding support for different types of sinks for a single
event is complex and is not something that we expect
on a sane configuration.
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Tested-by: Linu Cherian <lcherian@marvell.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20210405164307.1720226-10-suzuki.poulose@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
If the CPU implements Arm v8.4 Trace filter controls (FEAT_TRF),
move the ETM to trace prohibited region using TRFCR, while disabling.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20210405164307.1720226-9-suzuki.poulose@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
When the kernel is running at EL2, the PID is stored in CONTEXTIDR_EL2.
So, tracing CONTEXTIDR_EL1 doesn't give us the pid of the process.
Thus we should trace the VMID with VMIDOPT set to trace CONTEXTIDR_EL2
instead of CONTEXTIDR_EL1. Given that we have an existing config
option "contextid" and this will be useful for tracing virtual machines
(when we get to support virtualization).
So instead, this patch extends option CTXTID with an extra bit
ETM_OPT_CTXTID2 (bit 15), thus on an EL2 kernel, we will have another
bit available for the perf tool: ETM_OPT_CTXTID is for kernel running in
EL1, ETM_OPT_CTXTID2 is used when kernel runs in EL2 with VHE enabled.
The tool must be backward compatible for users, i.e, "contextid" today
traces PID and that should remain the same; for this purpose, the perf
tool is updated to automatically set corresponding bit for the
"contextid" config, therefore, the user doesn't have to bother which EL
the kernel is running.
i.e, perf record -e cs_etm/contextid/u --
will always do the "pid" tracing, independent of the kernel EL.
The driver parses the format "contextid", which traces CONTEXTIDR_EL1
for ETM_OPT_CTXTID (on EL1 kernel) and traces CONTEXTIDR_EL2 for
ETM_OPT_CTXTID2 (on EL2 kernel).
Besides the enhancement for format "contexid", extra two formats are
introduced: "contextid1" and "contextid2". This considers to support
tracing both CONTEXTIDR_EL1 and CONTEXTIDR_EL2 when the kernel is
running at EL2. Finally, the PMU formats are defined as follow:
"contextid1": Available on both EL1 kernel and EL2 kernel. When the
kernel is running at EL1, "contextid1" enables the PID
tracing; when the kernel is running at EL2, this enables
tracing the PID of guest applications.
"contextid2": Only usable when the kernel is running at EL2. When
selected, enables PID tracing on EL2 kernel.
"contextid": Will be an alias for the option that enables PID
tracing. I.e,
contextid == contextid1, on EL1 kernel.
contextid == contextid2, on EL2 kernel.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Al Grant <al.grant@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
[ Added two config formats: contextid1, contextid2 ]
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210206150833.42120-4-leo.yan@linaro.org
Link: https://lore.kernel.org/r/20210211172038.2483517-3-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In theory, the options should be arbitrary values and are neutral for
any ETM version; so far perf tool uses ETMv3.5/PTM ETMCR config bits
except for register's bit definitions, also uses as options.
This can introduce confusion, especially if we want to add a new option
but the new option is not supported by ETMv3.5/PTM ETMCR. But on the
other hand, we cannot change options since these options are generic
CoreSight PMU ABI.
For easier maintenance and avoid confusion, this patch refines the
comment to clarify perf options, and gives out the background info for
these bits are coming from ETMv3.5/PTM. Afterwards, we should take
these options as general knobs, and if there have any confliction with
ETMv3.5/PTM, should consider to define saperate macros for ETMv3.5/PTM
ETMCR config bits.
Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210206150833.42120-2-leo.yan@linaro.org
Link: https://lore.kernel.org/r/20210211172038.2483517-2-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This was non-trivial to get right because commits
c23bc382ef ("coresight: etm4x: Refactor probing routine") and
5214b56358 ("coresight: etm4x: Add support for sysreg only devices")
changed the code flow considerably. With this change the driver can be
built again.
Fixes: 0573d3fa48 ("Merge branch 'devel-stable' of git://git.armlinux.org.uk/~rmk/linux-arm into char-misc-next")
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Link: https://lore.kernel.org/r/20210205130848.20009-1-uwe@kleine-koenig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This merges from linux-arm at 860660fd82 ("ARM: 9055/1: mailbox:
arm_mhuv2: make remove callback return void") into char-misc-next to get
the amba fixes from Uwe.
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
v8.4 tracing extensions added support for trace filtering controlled
by TRFCR_ELx. This must be programmed to allow tracing at EL1/EL2 and
EL0. The timestamp used is the virtual time. Also enable CONTEXIDR_EL2
tracing if we are running the kernel at EL2.
Link: https://lore.kernel.org/r/20210110224850.1880240-29-suzuki.poulose@arm.com
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Jonathan Zhou <jonathan.zhouwen@huawei.com>
[ Move the trace filtering setup etm_init_arch_data() and clean ups]
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210201181351.1475223-31-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As we are about to add support for system register based devices,
we don't get an AMBA pid. So, the detection code could check
the system registers running on the CPU to check for the architecture
specific features. Thus we move the arch feature detection to
run on the CPU. We cannot always read the PID from the HW, as the
PID could be overridden by DT for broken devices. So, use the
PID from AMBA layer if available.
Link: https://lore.kernel.org/r/20210110224850.1880240-25-suzuki.poulose@arm.com
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: liuqi115@huawei.com
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210201181351.1475223-27-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Expose the TRCDEVARCH register via the sysfs for component
detection. Given that the TRCIDR1 may not completely identify
the ETM component and instead need to use TRCDEVARCH, expose
this via sysfs for tools to use it for identification.
Link: https://lore.kernel.org/r/20210110224850.1880240-21-suzuki.poulose@arm.com
Cc: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210201181351.1475223-23-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We are about to rely on TRCDEVARCH for detecting the ETM
and its architecture version, falling back to TRCIDR1 if
the former is not implemented (in older broken implementations).
Also, we use the architecture version information to
make some decisions. Streamline the architecture version
handling by adding helpers.
Link: https://lore.kernel.org/r/20210110224850.1880240-18-suzuki.poulose@arm.com
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210201181351.1475223-20-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
etm4_get_access_type() calculates the exception level bits
for use in address comparator registers. This is also used
by the TRCVICTLR register by shifting to the required position.
This patch cleans up the logic to make etm4_get_access_type()
calculate a generic mask which can be used by all users by
shifting to their field.
No functional changes intended.
Link: https://lore.kernel.org/r/20210110224850.1880240-17-suzuki.poulose@arm.com
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210201181351.1475223-19-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some of the management registers in ETMv4.x are not accessible
via system register instructions. Thus we must hide the sysfs
files exposing them to the userspace, to prevent system crashes.
This patch adds an is_visible() routine to control the visibility
at runtime for the registers that may not be accessed.
Link: https://lore.kernel.org/r/20210110224850.1880240-13-suzuki.poulose@arm.com
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210201181351.1475223-15-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ETM architecture defines the system instructions for accessing
via register accesses. Add basic support for accessing a given
register via system instructions.
We split the list of registers as :
1) Accessible only from memory mapped interface
2) Accessible from system register instructions.
All registers are accessible via the memory-mapped interface.
However, some registers are not accessible via the system
instructions. This list is then used to further filter out
the files we expose via sysfs.
Link: https://lore.kernel.org/r/20210110224850.1880240-12-suzuki.poulose@arm.com
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210201181351.1475223-14-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some of the ETM management registers are not accessible via
system instructions. Thus we need to filter accesses to these
registers depending on the access mechanism for the ETM at runtime.
The driver can cope with this for normal operation, by regular
checks. But the driver also exposes them via sysfs, which now
needs to be removed.
So far, we have used the generic coresight sysfs helper macros
to export a given device register, defining a "show" operation
per register. This is not helpful to filter the files at runtime,
based on the access.
In order to do this dynamically, we need to filter the attributes
by offsets and hard coded "show" functions doesn't make this easy.
Thus, switch to extended attributes, storing the offset in the scratch
space. This allows us to implement filtering based on the offset and
also saves us some text size. This will be later used for determining
a given attribute must be "visible" via sysfs.
Link: https://lore.kernel.org/r/20210110224850.1880240-10-suzuki.poulose@arm.com
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210201181351.1475223-12-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert all register accesses from etm4x driver to use a wrapper
to allow switching the access at runtime with little overhead.
co-developed by sed tool ;-), mostly equivalent to :
s/readl\(_relaxed\)\?(drvdata->base + \(.*\))/etm4x_\1_read32(csdev, \2)
s/writel\(_relaxed\)\?(\(.*\), drvdata->base + \(.*\))/etm4x_\1_write32(csdev, \2, \3)
We don't want to replace them with the csdev_access_* to
avoid a function call for every register access for system
register access. This is a prepartory step to add system
register access later where the support is available.
Link: https://lore.kernel.org/r/20210110224850.1880240-9-suzuki.poulose@arm.com
Cc: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210201181351.1475223-11-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Prepare the TPIU driver to make use of the CoreSight device access
abstraction layer. The driver touches the device even before the
coresight device is registered. Thus we could be accessing the
devices without a csdev. As we are about to use the abstraction
layer for accessing the device, pass in the access directly
to avoid having to deal with the un-initialised csdev.
Link: https://lore.kernel.org/r/20210110224850.1880240-5-suzuki.poulose@arm.com
Cc: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210201181351.1475223-7-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We are about to introduce support for sysreg access to ETMv4.4+
component. Since there are generic routines that access the
registers (e.g, CS_LOCK/UNLOCK , claim/disclaim operations, timeout)
and in order to preserve the logic of these operations at a
single place we introduce an abstraction layer for the accesses
to a given device.
Link: https://lore.kernel.org/r/20210110224850.1880240-4-suzuki.poulose@arm.com
Cc: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210201181351.1475223-6-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the ETM is affected by Qualcomm errata, modifying the
TRCPDCR could cause the system hang. Even though this is
taken care of during enable/disable ETM, the ETM state
save/restore could still access the TRCPDCR. Make sure
we skip the access during the save/restore.
Found by code inspection.
Link: https://lore.kernel.org/r/20210110224850.1880240-3-suzuki.poulose@arm.com
Fixes: 02510a5aa7 ("coresight: etm4x: Add support to skip trace unit power up")
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Cc: Tingwei Zhang <tingwei@codeaurora.org>
Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Reviewed-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210201181351.1475223-5-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All amba drivers return 0 in their remove callback. Together with the
driver core ignoring the return value anyhow, it doesn't make sense to
return a value here.
Change the remove prototype to return void, which makes it explicit that
returning an error value doesn't work as expected. This simplifies changing
the core remove callback to return void, too.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org> # for drivers/memory
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> # for hwtracing/coresight
Acked-By: Vinod Koul <vkoul@kernel.org> # for dmaengine
Acked-by: Guenter Roeck <linux@roeck-us.net> # for watchdog
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Acked-by: Takashi Iwai <tiwai@suse.de> # for sound
Acked-by: Vladimir Zapolskiy <vz@mleia.com> # for memory/pl172
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20210126165835.687514-5-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
In stm_heartbeat_init(): return value gets reset after the first
iteration by stm_source_register_device(), so allocation failures
after that will, after a clean up, return success. Fix that.
Fixes: 1192918530 ("stm class: Add heartbeat stm source device")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hui <john.wanghui@huawei.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Link: https://lore.kernel.org/r/20210115195917.3184-2-alexander.shishkin@linux.intel.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here is the big char/misc driver update for 5.11-rc1.
Continuing the tradition of previous -rc1 pulls, there seems to be more
and more tiny driver subsystems flowing through this tree.
Lots of different things, all of which have been in linux-next for a
while with no reported issues:
- extcon driver updates
- habannalab driver updates
- mei driver updates
- uio driver updates
- binder fixes and features added
- soundwire driver updates
- mhi bus driver updates
- phy driver updates
- coresight driver updates
- fpga driver updates
- speakup driver updates
- slimbus driver updates
- various small char and misc driver updates
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX9iDZA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylRMACgqxKS2CUcY8tPnR5weHEsbz6O+KAAn3BtEFnK
7V9EnSuZe4L1jNOHOB5V
=xzHh
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver updates from Greg KH:
"Here is the big char/misc driver update for 5.11-rc1.
Continuing the tradition of previous -rc1 pulls, there seems to be
more and more tiny driver subsystems flowing through this tree.
Lots of different things, all of which have been in linux-next for a
while with no reported issues:
- extcon driver updates
- habannalab driver updates
- mei driver updates
- uio driver updates
- binder fixes and features added
- soundwire driver updates
- mhi bus driver updates
- phy driver updates
- coresight driver updates
- fpga driver updates
- speakup driver updates
- slimbus driver updates
- various small char and misc driver updates"
* tag 'char-misc-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (305 commits)
extcon: max77693: Fix modalias string
extcon: fsa9480: Support TI TSU6111 variant
extcon: fsa9480: Rewrite bindings in YAML and extend
dt-bindings: extcon: add binding for TUSB320
extcon: Add driver for TI TUSB320
slimbus: qcom: fix potential NULL dereference in qcom_slim_prg_slew()
siox: Make remove callback return void
siox: Use bus_type functions for probe, remove and shutdown
spmi: Add driver shutdown support
spmi: fix some coding style issues at the spmi core
spmi: get rid of a warning when built with W=1
uio: uio_hv_generic: use devm_kzalloc() for private data alloc
uio: uio_fsl_elbc_gpcm: use device-managed allocators
uio: uio_aec: use devm_kzalloc() for uio_info object
uio: uio_cif: use devm_kzalloc() for uio_info object
uio: uio_netx: use devm_kzalloc() for or uio_info object
uio: uio_mf624: use devm_kzalloc() for uio_info object
uio: uio_sercos3: use device-managed functions for simple allocs
uio: uio_dmem_genirq: finalize conversion of probe to devm_ handlers
uio: uio_dmem_genirq: convert simple allocations to device-managed
...
The ETM device can't keep up with the core pipeline when cpu core
is at full speed. This may cause overflow within core and its ETM.
This is a common phenomenon on ETM devices.
On HiSilicon Hip08 platform, a specific feature is added to set
core pipeline. So commit rate can be reduced manually to avoid ETM
overflow.
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Qi Liu <liuqi115@huawei.com>
[Modified changelog title and Kconfig description]
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20201208182651.1597945-4-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Functions that are annotated __exit are discarded for built-in drivers,
but the .remove callback in a device driver must still be kept around
to allow bind/unbind operations.
There is now a linker warning for the discarded symbol references:
`tmc_remove' referenced in section `.data' of drivers/hwtracing/coresight/coresight-tmc-core.o: defined in discarded section `.exit.text' of drivers/hwtracing/coresight/coresight-tmc-core.o
`tpiu_remove' referenced in section `.data' of drivers/hwtracing/coresight/coresight-tpiu.o: defined in discarded section `.exit.text' of drivers/hwtracing/coresight/coresight-tpiu.o
`etb_remove' referenced in section `.data' of drivers/hwtracing/coresight/coresight-etb10.o: defined in discarded section `.exit.text' of drivers/hwtracing/coresight/coresight-etb10.o
`static_funnel_remove' referenced in section `.data' of drivers/hwtracing/coresight/coresight-funnel.o: defined in discarded section `.exit.text' of drivers/hwtracing/coresight/coresight-funnel.o
`dynamic_funnel_remove' referenced in section `.data' of drivers/hwtracing/coresight/coresight-funnel.o: defined in discarded section `.exit.text' of drivers/hwtracing/coresight/coresight-funnel.o
`static_replicator_remove' referenced in section `.data' of drivers/hwtracing/coresight/coresight-replicator.o: defined in discarded section `.exit.text' of drivers/hwtracing/coresight/coresight-replicator.o
`dynamic_replicator_remove' referenced in section `.data' of drivers/hwtracing/coresight/coresight-replicator.o: defined in discarded section `.exit.text' of drivers/hwtracing/coresight/coresight-replicator.o
`catu_remove' referenced in section `.data' of drivers/hwtracing/coresight/coresight-catu.o: defined in discarded section `.exit.text' of drivers/hwtracing/coresight/coresight-catu.o
Remove all those annotations.
Fixes: 8b0cf82677 ("coresight: stm: Allow to build coresight-stm as a module")
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20201208182651.1597945-3-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the ETR is used in perf mode with a larger buffer (configured
via sysfs or the default size of 1M) than the perf aux buffer size,
we end up inserting the barrier packet at the wrong offset, while
moving the offset forward. i.e, instead of the "new moved offset",
we insert it at the current hardware buffer offset. These packets
will not be visible as they are never copied and could lead to
corruption in the trace decoding side, as the decoder is not aware
that it needs to reset the decoding.
Fixes: ec13c78d7b ("coresight: tmc-etr: Add barrier packets when moving offset forward")
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: stable@vger.kernel.org
Reported-by: Al Grant <al.grant@arm.com>
Tested-by: Mike Leach <mike.leach@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20201208182651.1597945-2-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC drivers/hwtracing/coresight/coresight-cti-core.o
CC drivers/hwtracing/coresight/coresight-cti-platform.o
CC drivers/hwtracing/coresight/coresight-cti-sysfs.o
drivers/hwtracing/coresight/coresight-stm.c:109: warning: Function parameter or member 'guaranteed' not described in 'channel_space'
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20201127175256.1092685-16-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC drivers/hwtracing/coresight/coresight-etm4x-core.o
CC drivers/hwtracing/coresight/coresight-etm4x-sysfs.o
CC drivers/hwtracing/coresight/coresight-stm.o
drivers/hwtracing/coresight/coresight-tpiu.c:53: warning: Cannot understand * @base: memory mapped base address for this component.
on line 53 - I thought it was a doc line
CC drivers/hwtracing/coresight/coresight-cpu-debug.o
CC drivers/hwtracing/coresight/coresight-catu.o
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20201127175256.1092685-15-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC drivers/hwtracing/coresight/coresight-etm4x-sysfs.o
CC drivers/hwtracing/coresight/coresight-stm.o
drivers/hwtracing/coresight/coresight-core.c:440: warning: Function parameter or member 'csdev' not described in 'coresight_disable_source'
drivers/hwtracing/coresight/coresight-core.c:670: warning: Function parameter or member 'csdev' not described in 'coresight_get_ref'
drivers/hwtracing/coresight/coresight-core.c:687: warning: Function parameter or member 'csdev' not described in 'coresight_put_ref'
drivers/hwtracing/coresight/coresight-core.c:758: warning: Function parameter or member 'sink' not described in '_coresight_build_path'
CC drivers/hwtracing/coresight/coresight-cpu-debug.o
CC drivers/hwtracing/coresight/coresight-catu.o
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20201127175256.1092685-14-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
alloc_pages_node() return should be checked before calling
dma_map_page() to make sure that valid page is mapped or
else it can lead to aborts as below:
Unable to handle kernel paging request at virtual address ffffffc008000000
Mem abort info:
<snip>...
pc : __dma_inv_area+0x40/0x58
lr : dma_direct_map_page+0xd8/0x1c8
Call trace:
__dma_inv_area
tmc_pages_alloc
tmc_alloc_data_pages
tmc_alloc_sg_table
tmc_init_etr_sg_table
tmc_alloc_etr_buf
tmc_enable_etr_sink_sysfs
tmc_enable_etr_sink
coresight_enable_path
coresight_enable
enable_source_store
dev_attr_store
sysfs_kf_write
Fixes: 99443ea19e ("coresight: Add generic TMC sg table framework")
Cc: stable@vger.kernel.org
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mao Jinlong <jinlmao@codeaurora.org>
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20201127175256.1092685-13-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There was a report of NULL pointer dereference in ETF enable
path for perf CS mode with PID monitoring. It is almost 100%
reproducible when the process to monitor is something very
active such as chrome and with ETF as the sink, not ETR.
But code path shows that ETB has a similar path as ETF, so
there could be possible NULL pointer dereference crash in
ETB as well. Currently in a bid to find the pid, the owner
is dereferenced via task_pid_nr() call in etb_enable_perf()
and with owner being NULL, we can get a NULL pointer
dereference, so have a similar fix as ETF where we cache PID
in alloc_buffer() callback which is called as the part of
etm_setup_aux().
Fixes: 75d7dbd388 ("coresight: etb10: Add support for CPU-wide trace scenarios")
Cc: stable@vger.kernel.org
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20201127175256.1092685-11-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There was a report of NULL pointer dereference in ETF enable
path for perf CS mode with PID monitoring. It is almost 100%
reproducible when the process to monitor is something very
active such as chrome and with ETF as the sink and not ETR.
Currently in a bid to find the pid, the owner is dereferenced
via task_pid_nr() call in tmc_enable_etf_sink_perf() and with
owner being NULL, we get a NULL pointer dereference.
Looking at the ETR and other places in the kernel, ETF and the
ETB are the only places trying to dereference the task(owner)
in tmc_enable_etf_sink_perf() which is also called from the
sched_in path as in the call trace. Owner(task) is NULL even
in the case of ETR in tmc_enable_etr_sink_perf(), but since we
cache the PID in alloc_buffer() callback and it is done as part
of etm_setup_aux() when allocating buffer for ETR sink, we never
dereference this NULL pointer and we are safe. So lets do the
same thing with ETF and cache the PID to which the cs_buffer
belongs in tmc_alloc_etf_buffer() as done for ETR. This will
also remove the unnecessary function calls(task_pid_nr()) since
we are caching the PID.
Easily reproducible running below:
perf record -e cs_etm/@tmc_etf0/ -N -p <pid>
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000548
Mem abort info:
ESR = 0x96000006
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000006
CM = 0, WnR = 0
<snip>...
Call trace:
tmc_enable_etf_sink+0xe4/0x280
coresight_enable_path+0x168/0x1fc
etm_event_start+0x8c/0xf8
etm_event_add+0x38/0x54
event_sched_in+0x194/0x2ac
group_sched_in+0x54/0x12c
flexible_sched_in+0xd8/0x120
visit_groups_merge+0x100/0x16c
ctx_flexible_sched_in+0x50/0x74
ctx_sched_in+0xa4/0xa8
perf_event_sched_in+0x60/0x6c
perf_event_context_sched_in+0x98/0xe0
__perf_event_task_sched_in+0x5c/0xd8
finish_task_switch+0x184/0x1cc
schedule_tail+0x20/0xec
ret_from_fork+0x4/0x18
Fixes: 880af782c6 ("coresight: tmc-etf: Add support for CPU-wide trace scenarios")
Cc: stable@vger.kernel.org
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20201127175256.1092685-10-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As THIS_MODULE has been set in platform_driver_register(), so remove it
from static funnel driver and static replicator driver to avoid set it
twice.
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20201127175256.1092685-9-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
TRCVIPCSSCTLR is not present if the TRCIDR4.NUMPC > 0. Thus we
should only access the register if it is present, preventing
any undesired behavior.
Cc: stable@vger.kernel.org
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20201127175256.1092685-8-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
TRCPROCSELR is not implemented if the TRCIDR3.NUMPROC == 0. Skip
accessing the register in such cases.
Cc: stable@vger.kernel.org
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20201127175256.1092685-7-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since ETMv4.2, TRCIDR3.NUMPROCS has been extended to a 5bit field
by encoding the top 2 bits[4:3] in TRCIDR3.[13:12], which were RES0.
Fix the driver to compute the field correctly for ETMv4.2+
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20201127175256.1092685-6-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The TRCCIDCTLR1 is only implemented if TRCIDR4.NUMCIDC > 4.
Don't touch the register if it is not implemented.
Cc: stable@vger.kernel.org
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20201127175256.1092685-5-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
TRCVMIDCTRL1 is only implemented only if the TRCIDR4.NUMVMIDC > 4.
We must not touch the register otherwise.
Cc: stable@vger.kernel.org
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20201127175256.1092685-4-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a bug on the systems supporting to skip power up
(qcom,skip-power-up) where setting LPOVERRIDE bit(low-power
state override behaviour) will result in CPU hangs/lockups
even on the implementations which supports it. So skip
setting the LPOVERRIDE bit for such platforms.
Fixes: 02510a5aa7 ("coresight: etm4x: Add support to skip trace unit power up")
Cc: stable@vger.kernel.org
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20201127175256.1092685-2-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit [bb1860efc8] changed the sink handling code introducing an
uninitialised pointer bug. This results in the default sink selection
failing.
Prior to commit:
static void etm_setup_aux(...)
<snip>
struct coresight_device *sink;
<snip>
/* First get the selected sink from user space. */
if (event->attr.config2) {
id = (u32)event->attr.config2;
sink = coresight_get_sink_by_id(id);
} else {
sink = coresight_get_enabled_sink(true);
}
<ctd>
*sink always initialised - possibly to NULL which triggers the
automatic sink selection.
After commit:
static void etm_setup_aux(...)
<snip>
struct coresight_device *sink;
<snip>
/* First get the selected sink from user space. */
if (event->attr.config2) {
id = (u32)event->attr.config2;
sink = coresight_get_sink_by_id(id);
}
<ctd>
*sink pointer uninitialised when not providing a sink on the perf command
line. This breaks later checks to enable automatic sink selection.
Fixes: bb1860efc8 ("coresight: etm: perf: Sink selection using sysfs is deprecated")
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20201029164559.1268531-3-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When built as a loadable module, coresight now causes a warning about
missing license information.
WARNING: modpost: missing MODULE_LICENSE() in drivers/hwtracing/coresight/coresight.o
Fixes: 8e264c52e1 ("coresight: core: Allow the coresight core driver to be built as a module")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20201026160205.3704789-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To avoid mixup of packets from differnt ftrace packets simultaneously,
use different channel for packets from different CPU.
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Link: https://lore.kernel.org/r/20201005071319.78508-7-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Set flags for trace_export. Export function trace, event trace
and trace marker to stm.
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Link: https://lore.kernel.org/r/20201005071319.78508-6-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We will support copying event trace to STM. Change
STM_SOURCE_FTRACE to depend on TRACING since we will
support multiple tracers.
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Link: https://lore.kernel.org/r/20201005071319.78508-2-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In commit f188b5e76a ("coresight: etm4x: Save/restore state
across CPU low power states"), mistakenly TRCVMIDCCTLR1 register
value was saved in trcvmidcctlr0 state variable which is used to
store TRCVMIDCCTLR0 register value in etm4x_cpu_save() and then
same value is written back to both TRCVMIDCCTLR0 and TRCVMIDCCTLR1
in etm4x_cpu_restore(). There is already a trcvmidcctlr1 state
variable available for TRCVMIDCCTLR1, so use it.
Fixes: f188b5e76a ("coresight: etm4x: Save/restore state across CPU low power states")
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-26-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Enhance coresight developer's efficiency to debug coresight drivers.
- Kconfig becomes a tristate, to allow =m
- append -core to source file name to allow module to
be called coresight by the Makefile
- modules can have only one init/exit, so we add the etm_perf
register/unregister function calls to the core init/exit
functions.
- add a MODULE_DEVICE_TABLE for autoloading on boot
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Suzuki K Poulose <Suzuki.Poulose@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Russell King <linux@armlinux.org.uk>
Tested-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-25-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Allow to build coresight-catu as modules, for ease of development.
- Kconfig becomes a tristate, to allow =m
- add catu_remove functions, for module unload
- add a MODULE_DEVICE_TABLE for autoloading on boot
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-24-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make etr_catu_buf_ops static. Instead of directly accessing it in
etr_buf_ops[], add a function to let catu driver register the ops at
runtime. Break circular dependency between tmc-etr and catu drivers.
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-23-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Allow to build coresight-cti as a module, for ease of development.
- Kconfig becomes a tristate, to allow =m
- append -core to source file name to allow module to
be called coresight-cti by the Makefile
- add an cti_remove function, for module unload
- add a MODULE_DEVICE_TABLE for autoloading on boot
- move cti_remove_conn_xrefs to cti_remove since all sysfs links
have gone when system calls device_release.
Reviewed-by Mike Leach <mike.leach@linaro.org>
Tested-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-22-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CTI device is enabled when associated coresight device is enabled.
Increase the module and device reference count for CTI device
when it's enabled. This can prevent CTI device be removed or
module be unloaded when CTI device is enabled by an active trace
session.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-21-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If associated ect device is not enabled at first place, disable
routine should not be called. Add ect_enabled flag to check whether
ect device is enabled. Fix the issue in below case. Ect device is
not available when associated coresight device enabled and the
association is established after coresight device is enabled.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-20-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
During module unload, a coresight driver module will call back into
the CTI driver to remove any links between the two devices.
The current code has 2 issues:-
1) in the CTI driver the matching code is matching to the wrong device
so misses all the links.
2) The callback is called too late in the unload process resulting in a
crash.
This fixes both the issues.
Fixes: 177af8285b ("coresight: cti: Enable CTI associated with devices")
Reported-by: Tingwei Zhang <tingwei@codeaurora.org>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-19-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CTI code to remove sysfs link to other devices on shutdown, incorrectly
tries to remove a single ended link when these are all double ended. This
implementation leaves elements in the link info structure undefined which
results in a crash in recent tests for driver module unload.
This patch corrects the link removal code.
Fixes: 73274abb65 ("coresight: cti: Add in sysfs links to other coresight devices")
Reported-by: Tingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-18-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Allow to build coresight-replicator as modules, for ease of development.
- Kconfig becomes a tristate, to allow =m
- combine static and dynamic replicator init into single
module_init/exit call
- add replicator_remove functions, for module unload
- add a MODULE_DEVICE_TABLE for autoloading on boot
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Suzuki K Poulose <Suzuki.Poulose@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Russell King <linux@armlinux.org.uk>
Co-developed-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Tested-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-16-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Allow to build coresight-funnel as module, for ease of development.
- combine static and dynamic funnel init into single
module_init/exit call
- add funnel_remove functions, for module unload
- add a MODULE_DEVICE_TABLE for autoloading on boot
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Suzuki K Poulose <Suzuki.Poulose@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Russell King <linux@armlinux.org.uk>
Co-developed-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Tested-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-15-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Allow to build coresight-tmc as a module, for ease of development.
- Kconfig becomes a tristate, to allow =m
- append -core to source file name to allow module to
be called coresight-tmc by the Makefile
- add an tmc_remove function, for module unload
- add a MODULE_DEVICE_TABLE for autoloading on boot
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Suzuki K Poulose <Suzuki.Poulose@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Russell King <linux@armlinux.org.uk>
Tested-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-14-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Allow to build coresight-tpiu as a module, for ease of development.
- Kconfig becomes a tristate, to allow =m
- add a tpiu_remove function, for module unload
- add a MODULE_DEVICE_TABLE for autoloading on boot
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Suzuki K Poulose <Suzuki.Poulose@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Russell King <linux@armlinux.org.uk>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-13-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Allow to build coresight-etb10 as a module, for ease of development.
- Kconfig becomes a tristate, to allow =m
- add an etb_remove function, for module unload
- add a MODULE_DEVICE_TABLE for autoloading on boot
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Suzuki K Poulose <Suzuki.Poulose@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Russell King <linux@armlinux.org.uk>
Tested-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-12-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Allow to build coresight-etm4x as a module, for ease of development.
- Kconfig becomes a tristate, to allow =m
- append -core to source file name to allow module to
be called coresight-etm4x by the Makefile
- add an etm4_remove function, for module unload
- add a MODULE_DEVICE_TABLE for autoloading on boot
- delay advertising the per-cpu etmdrvdata
- protect etmdrvdata[] by modifying it on relevant CPU
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Suzuki K Poulose <Suzuki.Poulose@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Russell King <linux@armlinux.org.uk>
Tested-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-11-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Allow to build coresight-etm3x as a module, for ease of development.
- Kconfig becomes a tristate, to allow =m
- append -core to source file name to allow module to
be called coresight-etm3x by the Makefile
- add an etm_remove function, for module unload
- add a MODULE_DEVICE_TABLE for autoloading on boot
- delay advertising the per-cpu etmdrvdata
- protect etmdrvdata[] by modifying it on relevant CPU
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Suzuki K Poulose <Suzuki.Poulose@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Russell King <linux@armlinux.org.uk>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-10-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When coresight_build_path() fails on all the cpus, etm_setup_aux
calls etm_free_aux() to free allocated event_data.
WARN_ON(cpumask_empty(mask) will be triggered since cpu mask is empty.
Check event_data->snk_config is not NULL first to avoid this
warning.
Fixes: f5200aa983 ("coresight: perf: Refactor function free_event_data()")
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-9-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Kconfig becomes a tristate, to allow =m
- add a stm_remove function, for module unload
- add a MODULE_DEVICE_TABLE for autoloading on boot
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Suzuki K Poulose <Suzuki.Poulose@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Russell King <linux@armlinux.org.uk>
Tested-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-8-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When coresight device is in an active session, driver module of
that device should not be removed. Use try_get_module() in
coresight_grab_device() to prevent module to be unloaded.
Use get_device()/put_device() to protect device data
in the middle of active session.
Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Tested-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-7-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add coresight prefix to make it specific. It will be a export symbol.
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-5-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Checking for ifdef CONFIG_x fails if CONFIG_x=m. Use IS_ENABLED
that is true for both built-ins and modules, instead. Required
when building coresight components as modules.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Suzuki K Poulose <Suzuki.Poulose@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Russell King <linux@armlinux.org.uk>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-4-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Define a MODULE_DEVICE_TABLE for cpu_debug so module can
be auto loaded on boot.
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-3-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Provide name of cpu_debug module in Kconfig help section.
Tested-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-2-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The initialisation code checks TRCIDR4 to determine the number of resource
selectors available on the system. Since ETM v 4.3, the value 0 has a
different meaning. This patch takes into account this change.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
[Removed '.' in patch title, added stable]
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200916191737.4001561-17-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The member @nr_resource represents how many resource selector pairs,
and the pair 0 is always implemented and reserved.
So let's multiply by 2 when resetting the selector configuration.
And also update the validation of the input @idx.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Jonathan Zhou <jonathan.zhouwen@huawei.com>
[Fixed typographical error in changelog, added stable]
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200916191737.4001561-16-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Coresight driver assumes sink is common across all the ETMs,
and tries to build a path between ETM and the first enabled
sink found using bus based search. This breaks sysFS usage
on implementations that has multiple per core sinks in
enabled state.
To fix this, coresight_get_enabled_sink API is updated to
do a connection based search starting from the given source,
instead of bus based search.
With sink selection using sysfs depecrated for perf interface,
provision for reset is removed as well in this API.
Signed-off-by: Linu Cherian <lcherian@marvell.com>
[Fixed indentation problem and removed obsolete comment]
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200916191737.4001561-15-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When using the perf interface, sink selection using sysfs is
deprecated.
Signed-off-by: Linu Cherian <lcherian@marvell.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200916191737.4001561-14-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The TRCSEQEVR(3) is reserved, using '@nrseqstate - 1' instead to avoid
accessing the reserved register.
Fixes: f188b5e76a ("coresight: etm4x: Save/restore state across CPU low power states")
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Jonathan Zhou <jonathan.zhouwen@huawei.com>
[Fixed capital letter in title]
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200916191737.4001561-12-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the specified/hinted sink is not reachable from a subset of the CPUs,
we could end up unable to trace the event on those CPUs. This
is the best effort we could do until we support 1:1 configurations.
Fail gracefully in such cases avoiding a WARN_ON, which can be easily
triggered by the user on certain platforms (Arm N1SDP), with the following
trace paths :
CPU0
\
-- Funnel0 --> ETF0 -->
/ \
CPU1 \
MainFunnel
CPU2 /
\ /
-- Funnel1 --> ETF1 -->
/
CPU1
$ perf record --per-thread -e cs_etm/@ETF0/u -- <app>
could trigger the following WARNING, when the event is scheduled
on CPU2.
[10919.513250] ------------[ cut here ]------------
[10919.517861] WARNING: CPU: 2 PID: 24021 at
drivers/hwtracing/coresight/coresight-etm-perf.c:316 etm_event_start+0xf8/0x100
...
[10919.564403] CPU: 2 PID: 24021 Comm: perf Not tainted 5.8.0+ #24
[10919.570308] pstate: 80400089 (Nzcv daIf +PAN -UAO BTYPE=--)
[10919.575865] pc : etm_event_start+0xf8/0x100
[10919.580034] lr : etm_event_start+0x80/0x100
[10919.584202] sp : fffffe001932f940
[10919.587502] x29: fffffe001932f940 x28: fffffc834995f800
[10919.592799] x27: 0000000000000000 x26: fffffe0011f3ced0
[10919.598095] x25: fffffc837fce244c x24: fffffc837fce2448
[10919.603391] x23: 0000000000000002 x22: fffffc8353529c00
[10919.608688] x21: fffffc835bb31000 x20: 0000000000000000
[10919.613984] x19: fffffc837fcdcc70 x18: 0000000000000000
[10919.619281] x17: 0000000000000000 x16: 0000000000000000
[10919.624577] x15: 0000000000000000 x14: 00000000000009f8
[10919.629874] x13: 00000000000009f8 x12: 0000000000000018
[10919.635170] x11: 0000000000000000 x10: 0000000000000000
[10919.640467] x9 : fffffe00108cd168 x8 : 0000000000000000
[10919.645763] x7 : 0000000000000020 x6 : 0000000000000001
[10919.651059] x5 : 0000000000000002 x4 : 0000000000000001
[10919.656356] x3 : 0000000000000000 x2 : 0000000000000000
[10919.661652] x1 : fffffe836eb40000 x0 : 0000000000000000
[10919.666949] Call trace:
[10919.669382] etm_event_start+0xf8/0x100
[10919.673203] etm_event_add+0x40/0x60
[10919.676765] event_sched_in.isra.134+0xcc/0x210
[10919.681281] merge_sched_in+0xb0/0x2a8
[10919.685017] visit_groups_merge.constprop.140+0x15c/0x4b8
[10919.690400] ctx_sched_in+0x15c/0x170
[10919.694048] perf_event_sched_in+0x6c/0xa0
[10919.698130] ctx_resched+0x60/0xa0
[10919.701517] perf_event_exec+0x288/0x2f0
[10919.705425] begin_new_exec+0x4c8/0xf58
[10919.709247] load_elf_binary+0x66c/0xf30
[10919.713155] exec_binprm+0x15c/0x450
[10919.716716] __do_execve_file+0x508/0x748
[10919.720711] __arm64_sys_execve+0x40/0x50
[10919.724707] do_el0_svc+0xf4/0x1b8
[10919.728095] el0_sync_handler+0xf8/0x124
[10919.732003] el0_sync+0x140/0x180
Even though we don't support using separate sinks for the ETMs yet (e.g,
for 1:1 configurations), we should at least honor the user's choice and
handle the limitations gracefully, by simply skipping the tracing on ETMs
which can't reach the requested sink.
Fixes: f9d81a657b ("coresight: perf: Allow tracing on hotplugged CPUs")
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Reported-by: Jeremy Linton <jeremy.linton@arm.com>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200916191737.4001561-11-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Deadlock as below is triggered by one CPU holds drvdata->spinlock
and calls cti_enable_hw(). Smp_call_function_single() is called
in cti_enable_hw() and tries to let another CPU write CTI registers.
That CPU is trying to get drvdata->spinlock in cti_cpu_pm_notify()
and doesn't response to IPI from smp_call_function_single().
[ 988.335937] CPU: 6 PID: 10258 Comm: sh Tainted: G W L
5.8.0-rc6-mainline-16783-gc38daa79b26b-dirty #1
[ 988.346364] Hardware name: Thundercomm Dragonboard 845c (DT)
[ 988.352073] pstate: 20400005 (nzCv daif +PAN -UAO BTYPE=--)
[ 988.357689] pc : smp_call_function_single+0x158/0x1b8
[ 988.362782] lr : smp_call_function_single+0x124/0x1b8
...
[ 988.451638] Call trace:
[ 988.454119] smp_call_function_single+0x158/0x1b8
[ 988.458866] cti_enable+0xb4/0xf8 [coresight_cti]
[ 988.463618] coresight_control_assoc_ectdev+0x6c/0x128 [coresight]
[ 988.469855] coresight_enable+0x1f0/0x364 [coresight]
[ 988.474957] enable_source_store+0x5c/0x9c [coresight]
[ 988.480140] dev_attr_store+0x14/0x28
[ 988.483839] sysfs_kf_write+0x38/0x4c
[ 988.487532] kernfs_fop_write+0x1c0/0x2b0
[ 988.491585] vfs_write+0xfc/0x300
[ 988.494931] ksys_write+0x78/0xe0
[ 988.498283] __arm64_sys_write+0x18/0x20
[ 988.502240] el0_svc_common+0x98/0x160
[ 988.506024] do_el0_svc+0x78/0x80
[ 988.509377] el0_sync_handler+0xd4/0x270
[ 988.513337] el0_sync+0x164/0x180
This change write CTI registers directly in cti_enable_hw().
Config->hw_powered has been checked to be true with spinlock holded.
CTI is powered and can be programmed until spinlock is released.
Fixes: 6a0953ce7d ("coresight: cti: Add CPU idle pm notifer to CTI devices")
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
[Re-ordered variable declaration]
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200916191737.4001561-10-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The member @nr_addr_cmp is not a bool value, using operator '>'
instead to avoid unexpected failure.
Fixes: a77de2637c ("coresight: etm4x: moving sysFS entries to a dedicated file")
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Jonathan Zhou <jonathan.zhouwen@huawei.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200916191737.4001561-9-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Moving from using an address filter to trace the default "all addresses"
range to no filtering to acheive the same result, has caused the perf
filtering of kernel/user address spaces from not working unless an
explicit address filter was used.
This is due to the original code using a side-effect of the address
filtering rather than setting the global TRCVICTLR exception level
filtering.
The use of the mode sysfs file is also similarly affected.
A helper function is added to fix both instances.
Fixes: ae2041510d ("coresight: etmv4: Update default filter and initialisation")
Reported-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200916191737.4001561-8-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
STP_PACKET_MARKED is not supported by STM currently.
Add STM_FLAG_MARKED to support marked packet in STM.
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200916191737.4001561-3-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
etm4_count keeps track of number of ETMv4 registered and on some systems,
a race is observed on etm4_count variable which can lead to multiple calls
to cpuhp_setup_state_nocalls_cpuslocked(). This function internally calls
cpuhp_store_callbacks() which prevents multiple registrations of callbacks
for a given state and due to this race, it returns -EBUSY leading to ETM
probe failures like below.
coresight-etm4x: probe of 7040000.etm failed with error -16
This race can easily be triggered with async probe by setting probe type
as PROBE_PREFER_ASYNCHRONOUS and with ETM power management property
"arm,coresight-loses-context-with-cpu".
Prevent this race by moving cpuhp callbacks to etm driver init since the
cpuhp callbacks doesn't have to depend on the etm4_count and can be once
setup during driver init. Similarly we move cpu_pm notifier registration
to driver init and completely remove etm4_count usage. Also now we can
use non cpuslocked version of cpuhp callbacks with this movement.
Fixes: 9b6a3f3633 ("coresight: etmv4: Fix CPU power management setup in probe() function")
Fixes: 58eb457be0 ("hwtracing/coresight-etm4x: Convert to hotplug state machine")
Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Tested-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200916191737.4001561-2-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ETM state save/restore incorrectly reads/writes some of the 64bit
registers (e.g, address comparators, vmid/cid comparators etc.) using
32bit accesses. Ensure we use the appropriate width accessors for
the registers.
Fixes: f188b5e76a ("coresight: etm4x: Save/restore state across CPU low power states")
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200716175746.3338735-18-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add default sink selection to the perf trace handling in the etm driver.
Uses the select default sink infrastructure to select a sink for the perf
session, if no other sink is specified.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200716175746.3338735-17-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
An additional sink subtype is added to differentiate ETB/ETF buffer
sinks and ETR type system memory sinks.
This allows the prioritised selection of default sinks.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200716175746.3338735-16-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adds a method to select a suitable sink connected to a given source.
In cases where no sink is defined, the coresight_find_default_sink
routine can search from a given source, through the child connections
until a suitable sink is found.
The suitability is defined in by the sink coresight_dev_subtype on the
CoreSight device, and the distance from the source by counting
connections.
Higher value subtype is preferred - where these are equal, shorter
distance from source is used as a tie-break.
This allows for default sink to be discovered were none is specified
(e.g. perf command line)
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200716175746.3338735-15-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Implement a shutdown callback to ensure ETR hardware is
properly shutdown in reboot/shutdown path. This is required
for ETR which has SMMU address translation enabled like on
SC7180 SoC and few others. If the hardware is still accessing
memory after SMMU translation is disabled as part of SMMU
shutdown callback in system reboot or shutdown path, then
IOVAs(I/O virtual address) which it was using will go on the
bus as the physical addresses which might result in unknown
crashes (NoC/interconnect errors). So we make sure from this
shutdown callback that the ETR is shutdown before SMMU translation
is disabled and device_link in SMMU driver will take care of
ordering of shutdown callbacks such that SMMU shutdown callback
is not called before any of its consumer shutdown callbacks.
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200716175746.3338735-13-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The counter value registers change during operation, however this change
is not reflected in the values seen by the user in sysfs.
This fixes the issue by reading back the values on disable.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Fixes: 2e1cdfe184 ("coresight-etm4x: Adding CoreSight ETM4x driver")
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200716175746.3338735-11-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ETMv4 max resource selector constant incorrectly set to 16. Updated to the
correct 32 value, and adjustments made to limited code using it.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Fixes: 2e1cdfe184 ("coresight-etm4x: Adding CoreSight ETM4x driver")
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200716175746.3338735-10-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
acpi_dev_get_resources() does perform the NULL pointer check against
ACPI companion device which is given as function parameter. Thus,
there is no need to duplicate this check in the caller.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200716175746.3338735-9-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A multiplication for the size determination of a memory allocation
indicated that an array data structure should be processed.
Thus use the corresponding function "devm_kcalloc".
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200716175746.3338735-8-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On some QCOM SoCs, replicators in Always-On domain loses its
context as soon as the clock is disabled. Currently as a part
of pm_runtime workqueue, clock is disabled after the replicator
is initialized by amba_pm_runtime_suspend assuming that context
is not lost which is not true for replicators with such
limitations. So add a new property "qcom,replicator-loses-context"
to identify such replicators and reset them.
Suggested-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200716175746.3338735-6-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On some Qualcomm Technologies Inc. SoCs like SC7180, there
exists a hardware errata where the APSS (Application Processor
SubSystem)/CPU watchdog counter is stopped when the trace unit
power up ETM register is set (TRCPDCR.PU = 1). Since the ETMs
share the same power domain as that of respective CPU cores,
they are powered on when the CPU core is powered on. So we can
skip powering up of trace unit after checking for this errata
via new property called "qcom,skip-power-up".
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
Co-developed-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200716175746.3338735-4-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use CS_AMBA_ID macro for coresight catu AMBA id table
instead of open coding.
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200716175746.3338735-3-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use CS_AMBA_ID macro for dynamic replicator AMBA id table
instead of open coding.
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200716175746.3338735-2-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current probe() function calls a pair of cpuhp_xxx API functions to
setup CPU hotplug handling. The hotplug lock is held for the duration of
the two calls and other CPU related code using cpus_read_lock() /
cpus_read_unlock() calls.
The problem is that on error states, goto: statements bypass the
cpus_read_unlock() call. This code has increased in complexity as the
driver has developed.
This patch introduces a pair of helper functions etm4_pm_setup_cpuslocked()
and etm4_pm_clear() which correct the issues above and group the PM code a
little better.
The two functions etm4_cpu_pm_register() and etm4_cpu_pm_unregister() are
dropped as these call cpu_pm_register_notifier() / ..unregister_notifier()
dependent on CONFIG_CPU_PM - but this define is used to nop these functions
out in the pm headers - so the wrapper functions are superfluous.
Fixes: f188b5e76a ("coresight: etm4x: Save/restore state across CPU low power states")
Fixes: e9f5d63f84 ("hwtracing/coresight-etm4x: Use cpuhp_setup_state_nocalls_cpuslocked()")
Fixes: 58eb457be0 ("hwtracing/coresight-etm4x: Convert to hotplug state machine")
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200701160852.2782823-3-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There were a couple problems with error handling in the probe function:
1) If the "drvdata" allocation failed then it lead to a NULL
dereference.
2) On several error paths we decremented "nr_cti_cpu" before it was
incremented which lead to a reference counting bug.
There were also some parts of the error handling which were not bugs but
were messy. The error handling was confusing to read. It printed some
unnecessary error messages.
The simplest way to fix these problems was to create a cti_pm_setup()
function that did all the power management setup in one go. That way
when we call cti_pm_release() we don't have to deal with the
complications of a partially configured power management config.
I reversed the "if (drvdata->ctidev.cpu >= 0)" condition in
cti_pm_release() so that it mirros the new cti_pm_setup() function.
Fixes: 6a0953ce7d ("coresight: cti: Add CPU idle pm notifer to CTI devices")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200701160852.2782823-2-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Here is the large set of char/misc driver patches for 5.8-rc1
Included in here are:
- habanalabs driver updates, loads
- mhi bus driver updates
- extcon driver updates
- clk driver updates (approved by the clock maintainer)
- firmware driver updates
- fpga driver updates
- gnss driver updates
- coresight driver updates
- interconnect driver updates
- parport driver updates (it's still alive!)
- nvmem driver updates
- soundwire driver updates
- visorbus driver updates
- w1 driver updates
- various misc driver updates
In short, loads of different driver subsystem updates along with the
drivers as well.
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXtzkHw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yldOwCgus/DgpnI1UL4z+NdBxJrAXtkPmgAn2sgTUea
i5RblCmcVMqvHaGtYkY+
=tScN
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the large set of char/misc driver patches for 5.8-rc1
Included in here are:
- habanalabs driver updates, loads
- mhi bus driver updates
- extcon driver updates
- clk driver updates (approved by the clock maintainer)
- firmware driver updates
- fpga driver updates
- gnss driver updates
- coresight driver updates
- interconnect driver updates
- parport driver updates (it's still alive!)
- nvmem driver updates
- soundwire driver updates
- visorbus driver updates
- w1 driver updates
- various misc driver updates
In short, loads of different driver subsystem updates along with the
drivers as well.
All have been in linux-next for a while with no reported issues"
* tag 'char-misc-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (233 commits)
habanalabs: correctly cast u64 to void*
habanalabs: initialize variable to default value
extcon: arizona: Fix runtime PM imbalance on error
extcon: max14577: Add proper dt-compatible strings
extcon: adc-jack: Fix an error handling path in 'adc_jack_probe()'
extcon: remove redundant assignment to variable idx
w1: omap-hdq: print dev_err if irq flags are not cleared
w1: omap-hdq: fix interrupt handling which did show spurious timeouts
w1: omap-hdq: fix return value to be -1 if there is a timeout
w1: omap-hdq: cleanup to add missing newline for some dev_dbg
/dev/mem: Revoke mappings when a driver claims the region
misc: xilinx-sdfec: convert get_user_pages() --> pin_user_pages()
misc: xilinx-sdfec: cleanup return value in xsdfec_table_write()
misc: xilinx-sdfec: improve get_user_pages_fast() error handling
nvmem: qfprom: remove incorrect write support
habanalabs: handle MMU cache invalidation timeout
habanalabs: don't allow hard reset with open processes
habanalabs: GAUDI does not support soft-reset
habanalabs: add print for soft reset due to event
habanalabs: improve MMU cache invalidation code
...
set from Mauro toward the completion of the RST conversion. I *really*
hope we are getting close to the end of this. Meanwhile, those patches
reach pretty far afield to update document references around the tree;
there should be no actual code changes there. There will be, alas, more of
the usual trivial merge conflicts.
Beyond that we have more translations, improvements to the sphinx
scripting, a number of additions to the sysctl documentation, and lots of
fixes.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl7VId8PHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5Yq/gH/iaDgirQZV6UZ2v9sfwQNYolNpf2sKAuOZjd
bPFB7WJoMQbKwQEvYrAUL2+5zPOcLYuIfzyOfo1BV1py+EyKbACcKjI4AedxfJF7
+NchmOBhlEqmEhzx2U08HRc4/8J223WG17fJRVsV3p+opJySexSFeQucfOciX5NR
RUCxweWWyg/FgyqjkyMMTtsePqZPmcT5dWTlVXISlbWzcv5NFhuJXnSrw8Sfzcmm
SJMzqItv3O+CabnKQ8kMLV2PozXTMfjeWH47ZUK0Y8/8PP9+cvqwFzZ0UDQJ1Xaz
oyW/TqmunaXhfMsMFeFGSwtfgwRHvXdxkQdtwNHvo1dV4dzTvDw=
=fDC/
-----END PGP SIGNATURE-----
Merge tag 'docs-5.8' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"A fair amount of stuff this time around, dominated by yet another
massive set from Mauro toward the completion of the RST conversion. I
*really* hope we are getting close to the end of this. Meanwhile,
those patches reach pretty far afield to update document references
around the tree; there should be no actual code changes there. There
will be, alas, more of the usual trivial merge conflicts.
Beyond that we have more translations, improvements to the sphinx
scripting, a number of additions to the sysctl documentation, and lots
of fixes"
* tag 'docs-5.8' of git://git.lwn.net/linux: (130 commits)
Documentation: fixes to the maintainer-entry-profile template
zswap: docs/vm: Fix typo accept_threshold_percent in zswap.rst
tracing: Fix events.rst section numbering
docs: acpi: fix old http link and improve document format
docs: filesystems: add info about efivars content
Documentation: LSM: Correct the basic LSM description
mailmap: change email for Ricardo Ribalda
docs: sysctl/kernel: document unaligned controls
Documentation: admin-guide: update bug-hunting.rst
docs: sysctl/kernel: document ngroups_max
nvdimm: fixes to maintainter-entry-profile
Documentation/features: Correct RISC-V kprobes support entry
Documentation/features: Refresh the arch support status files
Revert "docs: sysctl/kernel: document ngroups_max"
docs: move locking-specific documents to locking/
docs: move digsig docs to the security book
docs: move the kref doc into the core-api book
docs: add IRQ documentation at the core-api book
docs: debugging-via-ohci1394.txt: add it to the core-api book
docs: fix references for ipmi.rst file
...
Adds a notify callback for CPU PM events to the CTI driver - for
CPU bound CTI devices.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200518180242.7916-24-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adds registration of CPU start and stop functions to CPU hotplug
mechanisms - for any CPU bound CTI.
Sets CTI powered flag according to state.
Will enable CTI on CPU start if there are existing enable requests.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200518180242.7916-23-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We don't need to cast void pointers, such as the amba_id data. Assign to
a local variable to make the code prettier and also return NULL instead
of 0 to make sparse happy.
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Joe Perches <joe@perches.com>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200518180242.7916-21-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We should include headers that C files use in the C files that use them
and avoid relying on implicit includes as much as possible. This helps
avoid compiler errors in the future about missing declarations when
header files change includes in the future.
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200518180242.7916-20-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sparse gets annoyed when this initializer is 0 but the first struct
member is a pointer. Just use { } to initialize instead so that sparse
is quiet.
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200518180242.7916-19-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These variables are assigned again before they're used. Leave them
unassigned at first so that the compiler can detect problems in the
future with use before initialization.
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200518180242.7916-18-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These functions aren't used outside the file they're in. Mark them
static to indicate as such and silence tools like sparse.
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
[Dropped changes in coresight-cti.c and coresight-etb10.c]
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200518180242.7916-17-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add PID for Arm Neoverse N1 ETM to the list of supported/known ETMs.
Signed-off-by: Anurag Koul <anurag.koul@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200518180242.7916-16-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Differing default states set on driver init / perf init and as a result
of a sysfs reset.
The ETMv4 can be programmed to trace the entire instruction address range
without the need to use address comparator filter resources.
(Described in the ETMv4.x technical reference manual)
sysfs reset was using this method, perf and default driver init were setup
with an address range comparator for the entire address range.
The perf / driver init has been altered to use the method without needing
any comparator address hardware.
Minor adjustment to the vinst_ctrl register initialisation to ensure
correct zero initialisation.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200518180242.7916-15-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On some QCOM platforms like SC7180, SDM845 and SM8150,
reading TMC mode register without proper coresight power
management can lead to async exceptions like the one in
the call trace below in tmc_read_prepare_etb(). This can
happen if the user tries to read the TMC etf data via
device node without setting up source and the sink first.
Fix this by having a check for coresight sysfs mode
before reading TMC mode management register.
Kernel panic - not syncing: Asynchronous SError Interrupt
CPU: 7 PID: 2605 Comm: hexdump Tainted: G S 5.4.30 #122
Call trace:
dump_backtrace+0x0/0x188
show_stack+0x20/0x2c
dump_stack+0xdc/0x144
panic+0x168/0x36c
panic+0x0/0x36c
arm64_serror_panic+0x78/0x84
do_serror+0x130/0x138
el1_error+0x84/0xf8
tmc_read_prepare_etb+0x88/0xb8
tmc_open+0x40/0xd8
misc_open+0x120/0x158
chrdev_open+0xb8/0x1a4
do_dentry_open+0x268/0x3a0
vfs_open+0x34/0x40
path_openat+0x39c/0xdf4
do_filp_open+0x90/0x10c
do_sys_open+0x150/0x3e8
__arm64_compat_sys_openat+0x28/0x34
el0_svc_common+0xa8/0x160
el0_svc_compat_handler+0x2c/0x38
el0_svc_compat+0x8/0x10
Fixes: 4525412a50 ("coresight: tmc: making prepare/unprepare functions generic")
Reported-by: Stephen Boyd <swboyd@chromium.org>
Suggested-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200518180242.7916-14-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On some systems the firmware may not describe all the ports
connected to a component (e.g, for security reasons). This
could be especially problematic for "funnels" where we could
end up in modifying memory beyond the allocated space for
refcounts.
e.g, for a funnel with input ports listed 0, 3, 5, nr_inport = 3.
However the we could access refcnts[5] while checking for
references, like :
[ 526.110401] ==================================================================
[ 526.117988] BUG: KASAN: slab-out-of-bounds in funnel_enable+0x54/0x1b0
[ 526.124706] Read of size 4 at addr ffffff8135f9549c by task bash/1114
[ 526.131324]
[ 526.132886] CPU: 3 PID: 1114 Comm: bash Tainted: G S 5.4.25 #232
[ 526.140397] Hardware name: Qualcomm Technologies, Inc. SC7180 IDP (DT)
[ 526.147113] Call trace:
[ 526.149653] dump_backtrace+0x0/0x188
[ 526.153431] show_stack+0x20/0x2c
[ 526.156852] dump_stack+0xdc/0x144
[ 526.160370] print_address_description+0x3c/0x494
[ 526.165211] __kasan_report+0x144/0x168
[ 526.169170] kasan_report+0x10/0x18
[ 526.172769] check_memory_region+0x1a4/0x1b4
[ 526.177164] __kasan_check_read+0x18/0x24
[ 526.181292] funnel_enable+0x54/0x1b0
[ 526.185072] coresight_enable_path+0x104/0x198
[ 526.189649] coresight_enable+0x118/0x26c
...
[ 526.237782] Allocated by task 280:
[ 526.241298] __kasan_kmalloc+0xf0/0x1ac
[ 526.245249] kasan_kmalloc+0xc/0x14
[ 526.248849] __kmalloc+0x28c/0x3b4
[ 526.252361] coresight_register+0x88/0x250
[ 526.256587] funnel_probe+0x15c/0x228
[ 526.260365] dynamic_funnel_probe+0x20/0x2c
[ 526.264679] amba_probe+0xbc/0x158
[ 526.268193] really_probe+0x144/0x408
[ 526.271970] driver_probe_device+0x70/0x140
...
[ 526.316810]
[ 526.318364] Freed by task 0:
[ 526.321344] (stack is not available)
[ 526.325024]
[ 526.326580] The buggy address belongs to the object at ffffff8135f95480
[ 526.326580] which belongs to the cache kmalloc-128 of size 128
[ 526.339439] The buggy address is located 28 bytes inside of
[ 526.339439] 128-byte region [ffffff8135f95480, ffffff8135f95500)
[ 526.351399] The buggy address belongs to the page:
[ 526.356342] page:ffffffff04b7e500 refcount:1 mapcount:0 mapping:ffffff814b00c380 index:0x0 compound_mapcount: 0
[ 526.366711] flags: 0x4000000000010200(slab|head)
[ 526.371475] raw: 4000000000010200 ffffffff05034008 ffffffff0501eb08 ffffff814b00c380
[ 526.379435] raw: 0000000000000000 0000000000190019 00000001ffffffff 0000000000000000
[ 526.387393] page dumped because: kasan: bad access detected
[ 526.393128]
[ 526.394681] Memory state around the buggy address:
[ 526.399619] ffffff8135f95380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 526.407046] ffffff8135f95400: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 526.414473] >ffffff8135f95480: 04 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 526.421900] ^
[ 526.426029] ffffff8135f95500: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 526.433456] ffffff8135f95580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 526.440883] ==================================================================
To keep the code simple, we now track the maximum number of
possible input/output connections to/from this component
@ nr_inport and nr_outport in platform_data, respectively.
Thus the output connections could be sparse and code is
adjusted to skip the unspecified connections.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Reported-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Tested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200518180242.7916-13-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the following sparse warning:
drivers/hwtracing/coresight/coresight-etb10.c:720:30: warning: symbol
'coresight_etb_groups' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200518180242.7916-12-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the following sparse warning:
drivers/hwtracing/coresight/coresight-cti.c:22:1: warning: symbol
'ect_net' was not declared. Should it be static?
drivers/hwtracing/coresight/coresight-cti.c:625:32: warning: symbol
'cti_ops_ect' was not declared. Should it be static?
drivers/hwtracing/coresight/coresight-cti.c:630:28: warning: symbol
'cti_ops' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200518180242.7916-11-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace the AMBA ETM PIDs with UCI IDs to avoid future
conflicts when adding the CTI support for QCOM Kryo385
CPU cores.
Fixes: 17b4add0d4 ("coresight: etm4x: Add ETM PIDs for SDM845 and MSM8996")
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200518180242.7916-10-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add ETM UCI IDs for Qualcomm SC7180 SoC. It has 2
big CPU cores based on Cortex-A76 and 6 LITTLE CPU
cores based on Cortex-A55.
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200518180242.7916-9-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adds in sysfs links for connections where the connected device is another
coresight device. This allows examination of the coresight topology.
Non-coresight connections remain just as a reference name.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200518180242.7916-6-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Coresight device connections are a bit complicated and is not
exposed currently to the user. One has to look at the platform
descriptions (DT bindings or ACPI bindings) to make an understanding.
Given the new naming scheme, it will be helpful to have this information
to choose the appropriate devices for tracing. This patch exposes
the device connections via links in the sysfs directories.
e.g, for a connection devA[OutputPort_X] -> devB[InputPort_Y]
is represented as two symlinks:
/sys/bus/coresight/.../devA/out:X -> /sys/bus/coresight/.../devB
/sys/bus/coresight/.../devB/in:Y -> /sys/bus/coresight/.../devA
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
[Revised to use the generic sysfs links functions & link structures.
Provides a connections sysfs group in each device to hold the links.]
Co-developed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200518180242.7916-5-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To allow the connections between coresight components to be represented
in sysfs, generic methods for creating sysfs links between two coresight
devices are added.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200518180242.7916-4-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Handle failures in fixing up connections for a newly registered
device. This will be useful to handle cases where we fail to expose
the links via sysfs for the connections.
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200518180242.7916-3-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As we prepare to expose the links between the devices in
sysfs, pass the coresight_device instance to the
coresight_release_platform_data in order to free up the connections
when the device is removed.
No functional changes as such in this patch.
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200518180242.7916-2-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fwnode_find_reference() doesn't return NULL and hence that check
should be avoided.
Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200507053547.13707-1-calvin.johnson@oss.nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Several references got broken due to txt to ReST conversion.
Several of them can be automatically fixed with:
scripts/documentation-file-ref-check --fix
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> # hwtracing/coresight/Kconfig
Reviewed-by: Paul E. McKenney <paulmck@kernel.org> # memory-barrier.txt
Acked-by: Alex Shi <alex.shi@linux.alibaba.com> # translations/zh_CN
Acked-by: Federico Vaga <federico.vaga@vaga.pv.it> # translations/it_IT
Acked-by: Marc Zyngier <maz@kernel.org> # kvm/arm64
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/6f919ddb83a33b5f2a63b6b5f0575737bb2b36aa.1586881715.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Some use cases prefer to keep collecting the trace data into the last
available window while the other windows are being offloaded instead of
stopping the trace. In this scenario, the window switch happens
automatically when the next window becomes available again.
Add an option to allow this and a sysfs attribute to enable it.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200319085152.52183-1-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dynamically adds sysfs attributes for all connections defined in the CTI.
Each connection has a triggers<N> sub-directory with name, in_signals,
in_types, out_signals and out_types as read-only parameters in the
directory. in_ or out_ parameters may be omitted if there are no in or
out signals for the connection.
Additionally each device has a nr_cons in the connections sub-directory.
This allows clients to explore the connection and trigger signal details
without needing to refer to device tree or specification of the device.
Standardised type information is provided for certain common functions -
e.g. snk_full for a trigger from a sink indicating full. Otherwise type
defaults to genio.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200320165303.13681-10-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The CoreSight subsystem enables a path of devices from source to sink.
Any CTI devices associated with the path devices must be enabled at the
same time.
This patch adds an associated coresight_device element to the main
coresight device structure, and uses this to create associations between
the CTI and other devices based on the device tree data. The associated
device element is used to enable CTI in conjunction with the path elements.
CTI devices are reference counted so where a single CTI is associated with
multiple elements on the path, it will be enabled on the first associated
device enable, and disabled with the last associated device disable.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200320165303.13681-9-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adds support for CTIs whose connections are implementation defined at
hardware design time, and not constrained by v8 architecture.
These CTIs have no standard connection setup, all the settings have to
be defined in the device tree files. The patch creates a set of connections
and trigger signals based on the information provided.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200320165303.13681-8-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The v8 architecture defines the relationship between a PE, its optional ETM
and a CTI. Unlike non-architectural CTIs which are implementation defined,
this has a fixed set of connections which can therefore be represented as a
simple tag in the device tree.
This patch defines the tags needed to create an entry for this PE/ETM/CTI
relationship, and provides functionality to implement the connection model
in the CTI driver.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200320165303.13681-7-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adds a user API to allow programming of CTI by trigger ID and
channel number. This will take the channel and trigger ID supplied
by the user and program the appropriate register values.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200320165303.13681-5-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adds in sysfs programming support for the CTI function register sets.
Allows direct manipulation of channel / trigger association registers.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200320165303.13681-4-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This introduces a baseline CTI driver and associated configuration files.
Uses the platform agnostic naming standard for CoreSight devices, along
with a generic platform probing method that currently supports device
tree descriptions, but allows for the ACPI bindings to be added once these
have been defined for the CTI devices.
Driver will probe for the device on the AMBA bus, and load the CTI driver
on CoreSight ID match to CTI IDs in tables.
Initial sysfs support for enable / disable provided.
Default CTI interconnection data is generated based on hardware
register signal counts, with no additional connection information.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200320165303.13681-2-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are a few places in the driver that end up returning ENOTSUPP to
the user, replace those with EINVAL.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fixes: ba82664c13 ("intel_th: Add Memory Storage Unit driver")
Cc: stable@vger.kernel.org # v4.4+
Link: https://lore.kernel.org/r/20200317062215.15598-6-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The unexpected state warning should only warn on illegal state
transitions. Fix that.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fixes: 615c164da0 ("intel_th: msu: Introduce buffer interface")
Cc: stable@vger.kernel.org # v5.4+
Link: https://lore.kernel.org/r/20200317062215.15598-5-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The operands of time_after() are in a wrong order in both instances in
the sys-t driver. Fix that.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fixes: 39f10239df ("stm class: p_sys-t: Add support for CLOCKSYNC packets")
Fixes: d69d5e8311 ("stm class: Add MIPI SyS-T protocol support")
Cc: stable@vger.kernel.org # v4.20+
Link: https://lore.kernel.org/r/20200317062215.15598-3-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some versions of Intel TH have an issue that prevents the multi mode of
MSU from working correctly, resulting in no trace data and potentially
stuck MSU pipeline.
Disable multi mode on such devices.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200317062215.15598-2-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some of the newly added code in the etm4x driver is inside of an #ifdef,
and some other code is outside of it, leading to a harmless warning when
CONFIG_CPU_PM is disabled:
drivers/hwtracing/coresight/coresight-etm4x.c:68:13: error: 'etm4_os_lock' defined but not used [-Werror=unused-function]
static void etm4_os_lock(struct etmv4_drvdata *drvdata)
^~~~~~~~~~~~
To avoid the warning and simplify the the #ifdef checks, use
IS_ENABLED() instead, so the compiler can drop the unused functions
without complaining.
Fixes: f188b5e76a ("coresight: etm4x: Save/restore state across CPU low power states")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[Fixed capital 'f' in title]
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20191213223107.1484-2-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit aac8da6517 ("intel_th: msu: Start handling IRQs") implicitly
relies on the use of devm_request_irq() to subsequently free the irqs on
device removal, but in case of the pci_free_irq_vectors() API, the
handlers need to be freed before it is called. Therefore, at the moment
the driver's remove path trips a BUG_ON(irq_has_action()):
> kernel BUG at drivers/pci/msi.c:375!
> invalid opcode: 0000 1 SMP
> CPU: 2 PID: 818 Comm: rmmod Not tainted 5.5.0-rc1+ #1
> RIP: 0010:free_msi_irqs+0x67/0x1c0
> pci_disable_msi+0x116/0x150
> pci_free_irq_vectors+0x1b/0x20
> intel_th_pci_remove+0x22/0x30 [intel_th_pci]
> pci_device_remove+0x3e/0xb0
> device_release_driver_internal+0xf0/0x1c0
> driver_detach+0x4c/0x8f
> bus_remove_driver+0x5c/0xd0
> driver_unregister+0x31/0x50
> pci_unregister_driver+0x40/0x90
> intel_th_pci_driver_exit+0x10/0xad6 [intel_th_pci]
> __x64_sys_delete_module+0x147/0x290
> ? exit_to_usermode_loop+0xd7/0x120
> do_syscall_64+0x57/0x1b0
> entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fix this by explicitly freeing irqs before freeing the vectors. We keep
using the devm_* variants because they are still useful in early error
paths.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fixes: aac8da6517 ("intel_th: msu: Start handling IRQs")
Reported-by: Ammy Yi <ammy.yi@intel.com>
Tested-by: Ammy Yi <ammy.yi@intel.com>
Cc: stable@vger.kernel.org # v5.2+
Link: https://lore.kernel.org/r/20191217115527.74383-4-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This adds Intel(R) Trace Hub PCI ID for Comet Lake PCH-V.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191217115527.74383-2-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As part of the cleanup of some remaining y2038 issues, I came to
fs/compat_ioctl.c, which still has a couple of commands that need support
for time64_t.
In completely unrelated work, I spent time on cleaning up parts of this
file in the past, moving things out into drivers instead.
After Al Viro reviewed an earlier version of this series and did a lot
more of that cleanup, I decided to try to completely eliminate the rest
of it and move it all into drivers.
This series incorporates some of Al's work and many patches of my own,
but in the end stops short of actually removing the last part, which is
the scsi ioctl handlers. I have patches for those as well, but they need
more testing or possibly a rewrite.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=lgCl
-----END PGP SIGNATURE-----
Merge tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground
Pull removal of most of fs/compat_ioctl.c from Arnd Bergmann:
"As part of the cleanup of some remaining y2038 issues, I came to
fs/compat_ioctl.c, which still has a couple of commands that need
support for time64_t.
In completely unrelated work, I spent time on cleaning up parts of
this file in the past, moving things out into drivers instead.
After Al Viro reviewed an earlier version of this series and did a lot
more of that cleanup, I decided to try to completely eliminate the
rest of it and move it all into drivers.
This series incorporates some of Al's work and many patches of my own,
but in the end stops short of actually removing the last part, which
is the scsi ioctl handlers. I have patches for those as well, but they
need more testing or possibly a rewrite"
* tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (42 commits)
scsi: sd: enable compat ioctls for sed-opal
pktcdvd: add compat_ioctl handler
compat_ioctl: move SG_GET_REQUEST_TABLE handling
compat_ioctl: ppp: move simple commands into ppp_generic.c
compat_ioctl: handle PPPIOCGIDLE for 64-bit time_t
compat_ioctl: move PPPIOCSCOMPRESS to ppp_generic
compat_ioctl: unify copy-in of ppp filters
tty: handle compat PPP ioctls
compat_ioctl: move SIOCOUTQ out of compat_ioctl.c
compat_ioctl: handle SIOCOUTQNSD
af_unix: add compat_ioctl support
compat_ioctl: reimplement SG_IO handling
compat_ioctl: move WDIOC handling into wdt drivers
fs: compat_ioctl: move FITRIM emulation into file systems
gfs2: add compat_ioctl support
compat_ioctl: remove unused convert_in_user macro
compat_ioctl: remove last RAID handling code
compat_ioctl: remove /dev/raw ioctl translation
compat_ioctl: remove PCI ioctl translation
compat_ioctl: remove joystick ioctl translation
...
Commit a753bfcfdb ("intel_th: Make the switch allocate its subdevices")
factored out intel_th_subdevice_alloc() from intel_th_populate(), but got
the error path wrong, resulting in two instances of a double put_device()
on a freshly initialized, but not 'added' device.
Fix this by only doing one put_device() in the error path.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Fixes: a753bfcfdb ("intel_th: Make the switch allocate its subdevices")
Reported-by: Wen Yang <wenyang@linux.alibaba.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable@vger.kernel.org # v4.14+
Link: https://lore.kernel.org/r/20191120130806.44028-2-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver allocates the spinlock but not initialize it.
Use spin_lock_init() on it to initialize it correctly.
This is detected by Coccinelle semantic patch.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Tested-by: Yabin Cui <yabinc@google.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20191118185207.30441-3-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver allocates the spinlock but not initialize it.
Use spin_lock_init() on it to initialize it correctly.
This is detected by Coccinelle semantic patch.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Tested-by: Yabin Cui <yabinc@google.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20191118185207.30441-2-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit c7fd62bc69 ("stm class: Introduce framing protocol drivers")
forgot to tear down the link between an stm device and its protocol
driver when policy is removed. This leads to an invalid pointer reference
if one tries to write to an stm device after the policy has been removed
and the protocol driver module unloaded, leading to the below splat:
> BUG: unable to handle page fault for address: ffffffffc0737068
> #PF: supervisor read access in kernel mode
> #PF: error_code(0x0000) - not-present page
> PGD 3d780f067 P4D 3d780f067 PUD 3d7811067 PMD 492781067 PTE 0
> Oops: 0000 [#1] SMP NOPTI
> CPU: 1 PID: 26122 Comm: cat Not tainted 5.4.0-rc5+ #1
> RIP: 0010:stm_output_free+0x40/0xc0 [stm_core]
> Call Trace:
> stm_char_release+0x3e/0x70 [stm_core]
> __fput+0xc6/0x260
> ____fput+0xe/0x10
> task_work_run+0x9d/0xc0
> exit_to_usermode_loop+0x103/0x110
> do_syscall_64+0x19d/0x1e0
> entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fix this by tearing down the link from an stm device to its protocol
driver when the policy involving that driver is removed.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Fixes: c7fd62bc69 ("stm class: Introduce framing protocol drivers")
Reported-by: Ammy Yi <ammy.yi@intel.com>
Tested-by: Ammy Yi <ammy.yi@intel.com>
CC: stable@vger.kernel.org # v4.20+
Link: https://lore.kernel.org/r/20191114064201.43089-2-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The second argument should be the lsb and the third argument should be
the msb.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20191104181251.26732-15-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When tracing etm data of multiple threads on multiple cpus through perf
interface, some link devices are shared between paths of different cpus.
It creates race conditions when different cpus wants to enable/disable
the same link device at the same time.
Example 1:
Two cpus want to enable different ports of a coresight funnel, thus
calling the funnel enable operation at the same time. But the funnel
enable operation isn't reentrantable.
Example 2:
For an enabled coresight dynamic replicator with refcnt=1, one cpu wants
to disable it, while another cpu wants to enable it. Ideally we still have
an enabled replicator with refcnt=1 at the end. But in reality the result
is uncertain.
Since coresight devices claim themselves when enabled for self-hosted
usage, the race conditions above usually make the link devices not usable
after many cycles.
To fix the race conditions, this patch uses spinlocks to serialize
enabling/disabling link devices.
Fixes: a06ae8609b ("coresight: add CoreSight core layer framework")
Signed-off-by: Yabin Cui <yabinc@google.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: stable <stable@vger.kernel.org> # 5.3
Link: https://lore.kernel.org/r/20191104181251.26732-14-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Coresight hardware is only likely to appear on Arm systems and currently
the core code has Arm-specific barrier operations in it so can't be
built anywhere else so add an explicit dependency saying so. This will
make no practical difference currently due to the way subsystems are
referenced, the subsystem is only pulled in on arm and arm64, so mainly
serves as documentation in case someone wants to increase build
coverage.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20191104181251.26732-13-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
An API to control single-shot comparator operation was missing from sysfs.
This adds the parameters to sysfs to allow programming of this feature.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20191104181251.26732-12-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently it is not possible to view the current settings of a given
address comparator without knowing what type it is set to. For example, if
a comparator is set as an addr_start comparator, attempting to read
addr_stop for the same index will result in an error.
addr_cmp_view is added to allow the user to see the current settings of
the indexed address comparator without resorting to trial and error when
the set type is not known.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20191104181251.26732-11-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Context ID and VM ID masks required 2 value inputs, even when the
second value is ignored as insufficient CID / VMID comparators are
implemented.
Permit a single value to be used if that is sufficient to cover all
implemented comparators.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20191104181251.26732-10-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Setting include / exclude on a range had to be done by setting
the bit in 'mode' before setting the range. However, setting this
bit also had the effect of altering the current range as well.
Changed to only set include / exclude setting of a range at the point of
setting that range. Either use a 3rd input parameter as the include exclude
value, or if not present use the current value of 'mode'. Do not change
current range when 'mode' changes.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20191104181251.26732-9-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following issues when using the ETMv4 start-stop logic.
1) Setting a start or a stop address should not automatically set the
start-stop status to 'on'. The value set by the user in 'mode' must
be respected or start instances could be missed.
2) Missing API for controlling TRCVIPCSSCTLR - start stop control by
PE comparators.
3) Default ETM configuration sets a trace all range, and correctly sets
the start-stop status bit. This was not being correctly reflected in
the 'mode' parameter.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20191104181251.26732-8-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
TRCACATRn registers have match bits for secure and non-secure exception
levels which are not accessible by the sysfs API.
This adds a new sysfs parameter to enable this - addr_exlevel_s_ns.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20191104181251.26732-7-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A number of issues are fixed relating to sysfs input validation:-
1) bb_ctrl_store() - incorrect compare of bit select field to absolute
value. Reworked per ETMv4 specification.
2) seq_event_store() - incorrect mask value - register has two
event values.
3) cyc_threshold_store() - must mask with max before checking min
otherwise wrapped values can set illegal value below min.
4) res_ctrl_store() - update to mask off all res0 bits.
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Fixes: a77de2637c ("coresight: etm4x: moving sysFS entries to a dedicated file")
Cc: stable <stable@vger.kernel.org> # 4.9+
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20191104181251.26732-6-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ETMv4.4 adds in support for tracing secure EL2 (per arch 8.x updates).
Patch accounts for this new capability.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20191104181251.26732-5-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some hardware will ignore bit TRCPDCR.PU which is used to signal
to hardware that power should not be removed from the trace unit.
Let's mitigate against this by conditionally saving and restoring
the trace unit state when the CPU enters low power states.
This patchset introduces a firmware property named
'arm,coresight-loses-context-with-cpu' - when this is present the
hardware state will be conditionally saved and restored.
A module parameter 'pm_save_enable' is also introduced which can
be configured to override the firmware property. This can be set
to never allow save/restore or to conditionally allow it (only for
self-hosted). The default value is determined by firmware.
We avoid saving the hardware state when self-hosted coresight isn't
in use to reduce PM latency - we can't determine this by reading the
claim tags (TRCCLAIMCLR) as these are 'trace' registers which need
power and clocking, something we can't easily provide in the PM
context. Therefore we rely on the existing drvdata->mode internal
state that is set when self-hosted coresight is used (and powered).
Signed-off-by: Andrew Murray <andrew.murray@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20191104181251.26732-2-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The shift of the unsigned int win->nr_blocks by PAGE_SHIFT may
potentially overflow. Note that the intended return of this shift
is expected to be a size_t however the shift is being performed as
an unsigned int. Fix this by casting win->nr_blocks to a size_t
before performing the shift.
Addresses-Coverity: ("Unintentional integer overflow")
Fixes: 615c164da0 ("intel_th: msu: Introduce buffer interface")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/lkml/20190726113151.8967-1-colin.king@canonical.com/
Link: https://lore.kernel.org/r/20191028070651.9770-5-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 615c164da0 ("intel_th: msu: Introduce buffer interface") forgot
to add a NULL pointer check for the value returned from kstrdup(), which
will be troublesome if the allocation fails.
Fix that by adding the check.
Addresses-Coverity: ("Dereference null return")
Fixes: 615c164da0 ("intel_th: msu: Introduce buffer interface")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
[alexander.shishkin: amended the commit message]
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/lkml/20190726120421.9650-1-colin.king@canonical.com/
Link: https://lore.kernel.org/r/20191028070651.9770-4-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 615c164da0 ("intel_th: msu: Introduce buffer interface") added a
mutex that it forgot to initialize, resulting in a lockdep splat.
Fix that by initializing the mutex statically.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fixes: 615c164da0 ("intel_th: msu: Introduce buffer interface")
Link: https://lore.kernel.org/r/20191028070651.9770-3-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 8116db57cf ("intel_th: Add switch triggering support") added
a trigger assertion of the CTS, but forgot to de-assert it at the end
of the sequence. This results in window switches randomly not happening.
Fix that by de-asserting the trigger at the end of the window switch
sequence.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fixes: 8116db57cf ("intel_th: Add switch triggering support")
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191028070651.9770-2-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Each of these drivers has a copy of the same trivial helper function to
convert the pointer argument and then call the native ioctl handler.
We now have a generic implementation of that, so use it.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Jiri Kosina <jkosina@suse.cz>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Here is the big char/misc driver pull request for 5.4-rc1.
As has been happening in previous releases, more and more individual
driver subsystem trees are ending up in here. Now if that is good or
bad I can't tell, but hopefully it makes your life easier as it's more
of an aggregation of trees together to one merge point for you.
Anyway, lots of stuff in here:
- habanalabs driver updates
- thunderbolt driver updates
- misc driver updates
- coresight and intel_th hwtracing driver updates
- fpga driver updates
- extcon driver updates
- some dma driver updates
- char driver updates
- android binder driver updates
- nvmem driver updates
- phy driver updates
- parport driver fixes
- pcmcia driver fix
- uio driver updates
- w1 driver updates
- configfs fixes
- other assorted driver updates
All of these have been in linux-next for a long time with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXYIT1g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ym9lwCgrHZlMMvfYNVm6GQ5ge58JJsVTL4AoNatTcL4
hfVMA6pCHWBjV65xVSf6
=Tijw
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big char/misc driver pull request for 5.4-rc1.
As has been happening in previous releases, more and more individual
driver subsystem trees are ending up in here. Now if that is good or
bad I can't tell, but hopefully it makes your life easier as it's more
of an aggregation of trees together to one merge point for you.
Anyway, lots of stuff in here:
- habanalabs driver updates
- thunderbolt driver updates
- misc driver updates
- coresight and intel_th hwtracing driver updates
- fpga driver updates
- extcon driver updates
- some dma driver updates
- char driver updates
- android binder driver updates
- nvmem driver updates
- phy driver updates
- parport driver fixes
- pcmcia driver fix
- uio driver updates
- w1 driver updates
- configfs fixes
- other assorted driver updates
All of these have been in linux-next for a long time with no reported
issues"
* tag 'char-misc-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (200 commits)
misc: mic: Use PTR_ERR_OR_ZERO rather than its implementation
habanalabs: correctly cast variable to __le32
habanalabs: show correct id in error print
habanalabs: stop using the acronym KMD
habanalabs: display card name as sensors header
habanalabs: add uapi to retrieve aggregate H/W events
habanalabs: add uapi to retrieve device utilization
habanalabs: Make the Coresight timestamp perpetual
habanalabs: explicitly set the queue-id enumerated numbers
habanalabs: print to kernel log when reset is finished
habanalabs: replace __le32_to_cpu with le32_to_cpu
habanalabs: replace __cpu_to_le32/64 with cpu_to_le32/64
habanalabs: Handle HW_IP_INFO if device disabled or in reset
habanalabs: Expose devices after initialization is done
habanalabs: improve security in Debug IOCTL
habanalabs: use default structure for user input in Debug IOCTL
habanalabs: Add descriptive name to PSOC app status register
habanalabs: Add descriptive names to PSOC scratch-pad registers
habanalabs: create two char devices per ASIC
habanalabs: change device_setup_cdev() to be more generic
...
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQUwxxKyE5l/npt8ARiEGxRG/Sl2wUCXYAIeQAKCRBiEGxRG/Sl
2/SzAQDEnoNxzV/R5kWFd+2kmFeY3cll0d99KMrWJ8om+kje6QD/cXxZHzFm+T1L
UPF66k76oOODV7cyndjXnTnRXbeCRAM=
=Szby
-----END PGP SIGNATURE-----
Merge tag 'leds-for-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds
Pull LED updates from Jacek Anaszewski:
"In this cycle we've finally managed to contribute the patch set
sorting out LED naming issues. Besides that there are many changes
scattered among various LED class drivers and triggers.
LED naming related improvements:
- add new 'function' and 'color' fwnode properties and deprecate
'label' property which has been frequently abused for conveying
vendor specific names that have been available in sysfs anyway
- introduce a set of standard LED_FUNCTION* definitions
- introduce a set of standard LED_COLOR_ID* definitions
- add a new {devm_}led_classdev_register_ext() API with the
capability of automatic LED name composition basing on the
properties available in the passed fwnode; the function is
backwards compatible in a sense that it uses 'label' data, if
present in the fwnode, for creating LED name
- add tools/leds/get_led_device_info.sh script for retrieving LED
vendor, product and bus names, if applicable; it also performs
basic validation of an LED name
- update following drivers and their DT bindings to use the new LED
registration API:
- leds-an30259a, leds-gpio, leds-as3645a, leds-aat1290, leds-cr0014114,
leds-lm3601x, leds-lm3692x, leds-lp8860, leds-lt3593, leds-sc27xx-blt
Other LED class improvements:
- replace {devm_}led_classdev_register() macros with inlines
- allow to call led_classdev_unregister() unconditionally
- switch to use fwnode instead of be stuck with OF one
LED triggers improvements:
- led-triggers:
- fix dereferencing of null pointer
- fix a memory leak bug
- ledtrig-gpio:
- GPIO 0 is valid
Drop superseeded apu2/3 support from leds-apu since for apu2+ a newer,
more complete driver exists, based on a generic driver for the AMD
SOCs gpio-controller, supporting LEDs as well other devices:
- drop profile field from priv data
- drop iosize field from priv data
- drop enum_apu_led_platform_types
- drop superseeded apu2/3 led support
- add pr_fmt prefix for better log output
- fix error message on probing failure
Other misc fixes and improvements to existing LED class drivers:
- leds-ns2, leds-max77650:
- add of_node_put() before return
- leds-pwm, leds-is31fl32xx:
- use struct_size() helper
- leds-lm3697, leds-lm36274, leds-lm3532:
- switch to use fwnode_property_count_uXX()
- leds-lm3532:
- fix brightness control for i2c mode
- change the define for the fs current register
- fixes for the driver for stability
- add full scale current configuration
- dt: Add property for full scale current.
- avoid potentially unpaired regulator calls
- move static keyword to the front of declarations
- fix optional led-max-microamp prop error handling
- leds-max77650:
- add of_node_put() before return
- add MODULE_ALIAS()
- Switch to fwnode property API
- leds-as3645a:
- fix misuse of strlcpy
- leds-netxbig:
- add of_node_put() in netxbig_leds_get_of_pdata()
- remove legacy board-file support
- leds-is31fl319x:
- simplify getting the adapter of a client
- leds-ti-lmu-common:
- fix coccinelle issue
- move static keyword to the front of declaration
- leds-syscon:
- use resource managed variant of device register
- leds-ktd2692:
- fix a typo in the name of a constant
- leds-lp5562:
- allow firmware files up to the maximum length
- leds-an30259a:
- fix typo
- leds-pca953x:
- include the right header"
* tag 'leds-for-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: (72 commits)
leds: lm3532: Fix optional led-max-microamp prop error handling
led: triggers: Fix dereferencing of null pointer
leds: ti-lmu-common: Move static keyword to the front of declaration
leds: lm3532: Move static keyword to the front of declarations
leds: trigger: gpio: GPIO 0 is valid
leds: pwm: Use struct_size() helper
leds: is31fl32xx: Use struct_size() helper
leds: ti-lmu-common: Fix coccinelle issue in TI LMU
leds: lm3532: Avoid potentially unpaired regulator calls
leds: syscon: Use resource managed variant of device register
leds: Replace {devm_}led_classdev_register() macros with inlines
leds: Allow to call led_classdev_unregister() unconditionally
leds: lm3532: Add full scale current configuration
dt: lm3532: Add property for full scale current.
leds: lm3532: Fixes for the driver for stability
leds: lm3532: Change the define for the fs current register
leds: lm3532: Fix brightness control for i2c mode
leds: Switch to use fwnode instead of be stuck with OF one
leds: max77650: Switch to fwnode property API
led: triggers: Fix a memory leak bug
...
RST conversion is happily mostly behind us.
- A new document on reproducible builds.
- We finally got around to zapping the documentation for hardware support
that was removed in 2004; one doesn't want to rush these things.
- The usual assortment of fixes, typo corrections, etc.
You'll still find a handful of annoying conflicts against other trees,
mostly tied to the last RST conversions; resolutions are straightforward
and the linux-next ones are good.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl1/J4IACgkQF0NaE2wM
flhYogf9EgYozCe8RocSq+JjJpZOSFjIGDQv+GwTjOBIdqgO9tSIaY/p0wSkYKil
jYXyMDF+Xwr8podsUep2F7akBM7j9XJ+XBGJcfOna0ypC9xoejMgWt9fU3YvaWge
dQJxIQ/iwkDlKNx6uOYgKysLUWFS0EP/nzPhqBo4bZZzhugvrR46D/nQqFNmGihd
l9yLalJtP5mC0XRUv3hpdAFFFKxdC0R3BGOel2V+slSClp0LEgpdMAuMaKydEDI3
Ch9ZpIp8fB8kqONCs9/X6083WRsDOMe28KgeGrGHo4Jla6u51QBLQjSVKttFv7xk
051yNJwDWMxgl+A4gyNLDPXM7Gd7HQ==
=v4dp
-----END PGP SIGNATURE-----
Merge tag 'docs-5.4' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"It's a somewhat calmer cycle for docs this time, as the churn of the
mass RST conversion is happily mostly behind us.
- A new document on reproducible builds.
- We finally got around to zapping the documentation for hardware
support that was removed in 2004; one doesn't want to rush these
things.
- The usual assortment of fixes, typo corrections, etc"
* tag 'docs-5.4' of git://git.lwn.net/linux: (67 commits)
Documentation: kbuild: Add document about reproducible builds
docs: printk-formats: Stop encouraging use of unnecessary %h[xudi] and %hh[xudi]
Documentation: Add "earlycon=sbi" to the admin guide
doc🔒 remove reference to clever use of read-write lock
devices.txt: improve entry for comedi (char major 98)
docs: mtd: Update spi nor reference driver
doc: arm64: fix grammar dtb placed in no attributes region
Documentation: sysrq: don't recommend 'S' 'U' before 'B'
mailmap: Update email address for Quentin Perret
docs: ftrace: clarify when tracing is disabled by the trace file
docs: process: fix broken link
Documentation/arm/samsung-s3c24xx: Remove stray U+FEFF character to fix title
Documentation/arm/sa1100/assabet: Fix 'make assabet_defconfig' command
Documentation/arm/sa1100: Remove some obsolete documentation
docs/zh_CN: update Chinese howto.rst for latexdocs making
Documentation: virt: Fix broken reference to virt tree's index
docs: Fix typo on pull requests guide
kernel-doc: Allow anonymous enum
Documentation: sphinx: Don't parse socket() as identifier reference
Documentation: sphinx: Add missing comma to list of strings
...
This patch adds barrier packets in the trace stream when the offset in the
data buffer needs to be moved forward. Otherwise the decoder isn't aware
of the break in the stream and can't synchronise itself with the trace
data.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Yabin Cui <yabinc@google.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Link: https://lore.kernel.org/r/20190829202842.580-18-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If less space is available in the perf ring buffer than the ETR buffer,
barrier packets inserted in the trace stream by tmc_sync_etr_buf() are
skipped over when the head of the buffer is moved forward, resulting in
traces that can't be decoded.
This patch decouples the process of syncing ETR buffers and the addition
of barrier packets in order to perform the latter once the offset in the
trace buffer has been properly computed.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Link: https://lore.kernel.org/r/20190829202842.580-17-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make the computation of a memory mask representing the width of the memory
bus into a function so that it can be re-used by the ETR driver.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Link: https://lore.kernel.org/r/20190829202842.580-16-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When tracing etm data of multiple threads on multiple cpus through
perf interface, each cpu has a unique etr_perf_buffer while sharing
the same etr device. There is no guarantee that the last cpu starts
etm tracing also stops last. This makes perf_data check fail.
Fix it by checking etr_buf instead of etr_perf_buffer.
Also move the code setting and clearing perf_buf to more suitable
places.
Fixes: 3147da92a8 ("coresight: tmc-etr: Allocate and free ETR memory buffers for CPU-wide scenarios")
Signed-off-by: Yabin Cui <yabinc@google.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20190829202842.580-15-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
TMC etr always copies all available data to perf aux buffer, which
may exceed the available space in perf aux buffer. It isn't suitable
for not-snapshot mode, because:
1) It may overwrite previously written data.
2) It may make the perf_event_mmap_page->aux_head report having more
or less data than the reality.
So change to only copy the latest data fitting the available space in
perf aux buffer.
Signed-off-by: Yabin Cui <yabinc@google.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20190829202842.580-14-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To improve clarity, let's update the comment for etm4_os_unlock
to use the name of the register as per the ETM architecture
specification.
The existing comment is also misleading as it suggests any value
written to TRCOSLAR unlocks the trace registers, however it must
be '0' - let's also correct this.
Signed-off-by: Andrew Murray <andrew.murray@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20190829202842.580-13-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Given that the user-exposed module parameter for 'boot_enable' matches
the variable that it sets, let's use module_param instead of
module_param_named.
Let's also use octal permissions (checkpatch recommends this) and
provide a module parameter description.
Signed-off-by: Andrew Murray <andrew.murray@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20190829202842.580-12-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Synchronization is recommended before disabling the trace registers
to prevent any start or stop points being speculative at the point
of disabling the unit (section 7.3.77 of ARM IHI 0064D).
Synchronization is also recommended after programming the trace
registers to ensure all updates are committed prior to normal code
resuming (section 4.3.7 of ARM IHI 0064D).
Let's ensure these syncronization points are present in the code
and clearly commented.
Note that we could rely on the barriers in CS_LOCK and
coresight_disclaim_device_unlocked or the context switch to user
space - however coresight may be of use in the kernel.
On armv8 the mb macro is defined as dsb(sy) - Given that the etm4x is
only used on armv8 let's directly use dsb(sy) instead of mb(). This
removes some ambiguity and makes it easier to correlate the code with
the TRM.
Signed-off-by: Andrew Murray <andrew.murray@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
[Fixed capital letter for "use" in title]
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20190829202842.580-11-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In addition to unlocking the OS lock, etm4_os_unlock will also
set the os_unlock flag. Therefore let's avoid unnecessarily
setting os_unlock flag outside of this function.
Signed-off-by: Andrew Murray <andrew.murray@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
[Fixed capital letter for "remove" in the title]
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20190829202842.580-10-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We warn the users of obsolete bindings in the DT for coresight replicator
and funnel drivers. However we use pr_warn_once() which doesn't give a clue
about which device it is bound to. Let us use dev_warn_once() to give the
context.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20190829202842.580-8-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CoreSight TMC-ETR must have the non-secure invasive debug access
enabled for use by self-hosted tracing. Without it, there is no
point in enabling the ETR. So, let us check it in the TMC_AUTHSTATUS
register and fail the probe if it is disabled.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20190829202842.580-7-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We have so far ignored the memory errors, assuming that we have perfect
hardware and driver. Let us handle the memory errors reported by the
TMC ETR in status and truncate the buffer.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
[Removed ASCII smiley face from changelog]
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20190829202842.580-6-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We now use refcounts for the etr_buf users. Let us initialize it
while we allocate it.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20190829202842.580-5-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for coresight CPU debug module on Qualcomm
Kryo CPUs. This patch adds the UCI entries for Kryo CPUs
found on MSM8996 which shares the same PIDs as ETMs.
Without this, below error is observed on MSM8996:
[ 5.429867] OF: graph: no port node found in /soc/debug@3810000
[ 5.429938] coresight-etm4x: probe of 3810000.debug failed with error -22
[ 5.435415] coresight-cpu-debug 3810000.debug: Coresight debug-CPU0 initialized
[ 5.446474] OF: graph: no port node found in /soc/debug@3910000
[ 5.448927] coresight-etm4x: probe of 3910000.debug failed with error -22
[ 5.454681] coresight-cpu-debug 3910000.debug: Coresight debug-CPU1 initialized
[ 5.487765] OF: graph: no port node found in /soc/debug@3a10000
[ 5.488007] coresight-etm4x: probe of 3a10000.debug failed with error -22
[ 5.493024] coresight-cpu-debug 3a10000.debug: Coresight debug-CPU2 initialized
[ 5.501802] OF: graph: no port node found in /soc/debug@3b10000
[ 5.512901] coresight-etm4x: probe of 3b10000.debug failed with error -22
[ 5.513192] coresight-cpu-debug 3b10000.debug: Coresight debug-CPU3 initialized
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20190829202842.580-4-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of overriding the peripheral id(PID) check in AMBA
by hardcoding them in DT, add the PIDs to the ETM4x driver.
Here we use Unique Component Identifier(UCI) for MSM8996
since the ETM and CPU debug module shares the same PIDs.
SDM845 does not support CPU debug module.
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20190829202842.580-3-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Avoid an extra function call in two function implementations
by using a ternary operator instead of a conditional statement.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20190829202842.580-2-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here are 4 small SPDX fixes for 5.3-rc5. A few style fixes for some
SPDX comments, added an SPDX tag for one file, and fix up some GPL
boilerplate for another file.
All of these have been in linux-next for a few weeks with no reported
issues (they are comment changes only, so that's to be expected...)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXVkVSg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yneygCfdBxdIl98qXA2SRDLeKl/PkSJH1gAoLwnkoKq
WK/gN0IMFf25UrItBsGe
=b31n
-----END PGP SIGNATURE-----
Merge tag 'spdx-5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX fixes from Greg KH:
"Here are four small SPDX fixes for 5.3-rc5.
A few style fixes for some SPDX comments, added an SPDX tag for one
file, and fix up some GPL boilerplate for another file.
All of these have been in linux-next for a few weeks with no reported
issues (they are comment changes only, so that's to be expected...)"
* tag 'spdx-5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
i2c: stm32: Use the correct style for SPDX License Identifier
intel_th: Use the correct style for SPDX License Identifier
coccinelle: api/atomic_as_refcounter: add SPDX License Identifier
kernel/configs: Replace GPL boilerplate code with SPDX identifier
While running the linux-next with CONFIG_DEBUG_LOCKS_ALLOC enabled,
I get the following splat.
BUG: key ffffcb5636929298 has not been registered!
------------[ cut here ]------------
DEBUG_LOCKS_WARN_ON(1)
WARNING: CPU: 1 PID: 53 at kernel/locking/lockdep.c:3669 lockdep_init_map+0x164/0x1f0
CPU: 1 PID: 53 Comm: kworker/1:1 Tainted: G W 5.2.0-next-20190712-00015-g00ad4634222e-dirty #603
Workqueue: events amba_deferred_retry_func
pstate: 60c00005 (nZCv daif +PAN +UAO)
pc : lockdep_init_map+0x164/0x1f0
lr : lockdep_init_map+0x164/0x1f0
[ trimmed ]
Call trace:
lockdep_init_map+0x164/0x1f0
__kernfs_create_file+0x9c/0x158
sysfs_add_file_mode_ns+0xa8/0x1d0
sysfs_add_file_to_group+0x88/0xd8
etm_perf_add_symlink_sink+0xcc/0x138
coresight_register+0x110/0x280
tmc_probe+0x160/0x420
[ trimmed ]
---[ end trace ab4cc669615ba1b0 ]---
Fix this by initialising the dynamically allocated attribute properly.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Fixes: bb8e370bdc ("coresight: perf: Add "sinks" group to PMU directory")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
[Fixed a typograhic error in the changelog]
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20190801172323.18359-2-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
