In null_register_zoned_dev(), there is no need to set disk->nr_zones as
the now uncoditional call to blk_revalidate_disk_zones() will do that.
So remove the assignment using bdev_nr_zones().
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240621031506.759397-2-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add support to set block layer request_queue atomic write limits. The
limits will be derived from either the namespace or controller atomic
parameters.
NVMe atomic-related parameters are grouped into "normal" and "power-fail"
(or PF) class of parameter. For atomic write support, only PF parameters
are of interest. The "normal" parameters are concerned with racing reads
and writes (which also applies to PF). See NVM Command Set Specification
Revision 1.0d section 2.1.4 for reference.
Whether to use per namespace or controller atomic parameters is decided by
NSFEAT bit 1 - see Figure 97: Identify – Identify Namespace Data
Structure, NVM Command Set.
NVMe namespaces may define an atomic boundary, whereby no atomic guarantees
are provided for a write which straddles this per-lba space boundary. The
block layer merging policy is such that no merges may occur in which the
resultant request would straddle such a boundary.
Unlike SCSI, NVMe specifies no granularity or alignment rules, apart from
atomic boundary rule. In addition, again unlike SCSI, there is no
dedicated atomic write command - a write which adheres to the atomic size
limit and boundary is implicitly atomic.
If NSFEAT bit 1 is set, the following parameters are of interest:
- NAWUPF (Namespace Atomic Write Unit Power Fail)
- NABSPF (Namespace Atomic Boundary Size Power Fail)
- NABO (Namespace Atomic Boundary Offset)
and we set request_queue limits as follows:
- atomic_write_unit_max = rounddown_pow_of_two(NAWUPF)
- atomic_write_max_bytes = NAWUPF
- atomic_write_boundary = NABSPF
If in the unlikely scenario that NABO is non-zero, then atomic writes will
not be supported at all as dealing with this adds extra complexity. This
policy may change in future.
In all cases, atomic_write_unit_min is set to the logical block size.
If NSFEAT bit 1 is unset, the following parameter is of interest:
- AWUPF (Atomic Write Unit Power Fail)
and we set request_queue limits as follows:
- atomic_write_unit_max = rounddown_pow_of_two(AWUPF)
- atomic_write_max_bytes = AWUPF
- atomic_write_boundary = 0
A new function, nvme_valid_atomic_write(), is also called from submission
path to verify that a request has been submitted to the driver will
actually be executed atomically. As mentioned, there is no dedicated NVMe
atomic write command (which may error for a command which exceeds the
controller atomic write limits).
Note on NABSPF:
There seems to be some vagueness in the spec as to whether NABSPF applies
for NSFEAT bit 1 being unset. Figure 97 does not explicitly mention NABSPF
and how it is affected by bit 1. However Figure 4 does tell to check Figure
97 for info about per-namespace parameters, which NABSPF is, so it is
implied. However currently nvme_update_disk_info() does check namespace
parameter NABO regardless of this bit.
Signed-off-by: Alan Adamson <alan.adamson@oracle.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
jpg: total rewrite
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240620125359.2684798-11-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add initial support for atomic writes.
As is standard method, feed device properties via modules param, those
being:
- atomic_max_size_blks
- atomic_alignment_blks
- atomic_granularity_blks
- atomic_max_size_with_boundary_blks
- atomic_max_boundary_blks
These just match sbc4r22 section 6.6.4 - Block limits VPD page.
We just support ATOMIC WRITE (16).
The major change in the driver is how we lock the device for RW accesses.
Currently the driver uses a per-device lock for accessing device metadata
and "media" data (calls to do_device_access()) atomically for the duration
of the whole read/write command.
This should not suit verifying atomic writes. Reason being that currently
all reads/writes are atomic, so using atomic writes does not prove
anything.
Change device access model to basis that regular writes only atomic on a
per-sector basis, while reads and atomic writes are fully atomic.
As mentioned, since accessing metadata and device media is atomic,
continue to have regular writes involving metadata - like discard or PI -
as atomic. We can improve this later.
Currently we only support model where overlapping going reads or writes
wait for current access to complete before commencing an atomic write.
This is described in 4.29.3.2 section of the SBC. However, we simplify,
things and wait for all accesses to complete (when issuing an atomic
write).
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20240620125359.2684798-10-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Support is divided into two main areas:
- reading VPD pages and setting sdev request_queue limits
- support WRITE ATOMIC (16) command and tracing
The relevant block limits VPD page need to be read to allow the block layer
request_queue atomic write limits to be set. These VPD page limits are
described in sbc4r22 section 6.6.4 - Block limits VPD page.
There are five limits of interest:
- MAXIMUM ATOMIC TRANSFER LENGTH
- ATOMIC ALIGNMENT
- ATOMIC TRANSFER LENGTH GRANULARITY
- MAXIMUM ATOMIC TRANSFER LENGTH WITH BOUNDARY
- MAXIMUM ATOMIC BOUNDARY SIZE
MAXIMUM ATOMIC TRANSFER LENGTH is the maximum length for a WRITE ATOMIC
(16) command. It will not be greater than the device MAXIMUM TRANSFER
LENGTH.
ATOMIC ALIGNMENT and ATOMIC TRANSFER LENGTH GRANULARITY are the minimum
alignment and length values for an atomic write in terms of logical blocks.
Unlike NVMe, SCSI does not specify an LBA space boundary, but does specify
a per-IO boundary granularity. The maximum boundary size is specified in
MAXIMUM ATOMIC BOUNDARY SIZE. When used, this boundary value is set in the
WRITE ATOMIC (16) ATOMIC BOUNDARY field - layout for the WRITE_ATOMIC_16
command can be found in sbc4r22 section 5.48. This boundary value is the
granularity size at which the device may atomically write the data. A value
of zero in WRITE ATOMIC (16) ATOMIC BOUNDARY field means that all data must
be atomically written together.
MAXIMUM ATOMIC TRANSFER LENGTH WITH BOUNDARY is the maximum atomic write
length if a non-zero boundary value is set.
For atomic write support, the WRITE ATOMIC (16) boundary is not of much
interest, as the block layer expects each request submitted to be executed
atomically. However, the SCSI spec does leave itself open to a quirky
scenario where MAXIMUM ATOMIC TRANSFER LENGTH is zero, yet MAXIMUM ATOMIC
TRANSFER LENGTH WITH BOUNDARY and MAXIMUM ATOMIC BOUNDARY SIZE are both
non-zero. This case will be supported.
To set the block layer request_queue atomic write capabilities, sanitize
the VPD page limits and set limits as follows:
- atomic_write_unit_min is derived from granularity and alignment values.
If no granularity value is not set, use physical block size
- atomic_write_unit_max is derived from MAXIMUM ATOMIC TRANSFER LENGTH. In
the scenario where MAXIMUM ATOMIC TRANSFER LENGTH is zero and boundary
limits are non-zero, use MAXIMUM ATOMIC BOUNDARY SIZE for
atomic_write_unit_max. New flag scsi_disk.use_atomic_write_boundary is
set for this scenario.
- atomic_write_boundary_bytes is set to zero always
SCSI also supports a WRITE ATOMIC (32) command, which is for type 2
protection enabled. This is not going to be supported now, so check for
T10_PI_TYPE2_PROTECTION when setting any request_queue limits.
To handle an atomic write request, add support for WRITE ATOMIC (16)
command in handler sd_setup_atomic_cmnd(). Flag use_atomic_write_boundary
is checked here for encoding ATOMIC BOUNDARY field.
Trace info is also added for WRITE_ATOMIC_16 command.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20240620125359.2684798-9-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Support atomic writes by submitting a single BIO with the REQ_ATOMIC set.
It must be ensured that the atomic write adheres to its rules, like
naturally aligned offset, so call blkdev_dio_invalid() ->
blkdev_atomic_write_valid() [with renaming blkdev_dio_unaligned() to
blkdev_dio_invalid()] for this purpose. The BIO submission path currently
checks for atomic writes which are too large, so no need to check here.
In blkdev_direct_IO(), if the nr_pages exceeds BIO_MAX_VECS, then we cannot
produce a single BIO, so error in this case.
Finally set FMODE_CAN_ATOMIC_WRITE when the bdev can support atomic writes
and the associated file flag is for O_DIRECT.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20240620125359.2684798-8-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Extend statx system call to return additional info for atomic write support
support if the specified file is a block device.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Prasad Singamsetty <prasad.singamsetty@oracle.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20240620125359.2684798-7-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add atomic write support, as follows:
- add helper functions to get request_queue atomic write limits
- report request_queue atomic write support limits to sysfs and update Doc
- support to safely merge atomic writes
- deal with splitting atomic writes
- misc helper functions
- add a per-request atomic write flag
New request_queue limits are added, as follows:
- atomic_write_hw_max is set by the block driver and is the maximum length
of an atomic write which the device may support. It is not
necessarily a power-of-2.
- atomic_write_max_sectors is derived from atomic_write_hw_max_sectors and
max_hw_sectors. It is always a power-of-2. Atomic writes may be merged,
and atomic_write_max_sectors would be the limit on a merged atomic write
request size. This value is not capped at max_sectors, as the value in
max_sectors can be controlled from userspace, and it would only cause
trouble if userspace could limit atomic_write_unit_max_bytes and the
other atomic write limits.
- atomic_write_hw_unit_{min,max} are set by the block driver and are the
min/max length of an atomic write unit which the device may support. They
both must be a power-of-2. Typically atomic_write_hw_unit_max will hold
the same value as atomic_write_hw_max.
- atomic_write_unit_{min,max} are derived from
atomic_write_hw_unit_{min,max}, max_hw_sectors, and block core limits.
Both min and max values must be a power-of-2.
- atomic_write_hw_boundary is set by the block driver. If non-zero, it
indicates an LBA space boundary at which an atomic write straddles no
longer is atomically executed by the disk. The value must be a
power-of-2. Note that it would be acceptable to enforce a rule that
atomic_write_hw_boundary_sectors is a multiple of
atomic_write_hw_unit_max, but the resultant code would be more
complicated.
All atomic writes limits are by default set 0 to indicate no atomic write
support. Even though it is assumed by Linux that a logical block can always
be atomically written, we ignore this as it is not of particular interest.
Stacked devices are just not supported either for now.
An atomic write must always be submitted to the block driver as part of a
single request. As such, only a single BIO must be submitted to the block
layer for an atomic write. When a single atomic write BIO is submitted, it
cannot be split. As such, atomic_write_unit_{max, min}_bytes are limited
by the maximum guaranteed BIO size which will not be required to be split.
This max size is calculated by request_queue max segments and the number
of bvecs a BIO can fit, BIO_MAX_VECS. Currently we rely on userspace
issuing a write with iovcnt=1 for pwritev2() - as such, we can rely on each
segment containing PAGE_SIZE of data, apart from the first+last, which each
can fit logical block size of data. The first+last will be LBS
length/aligned as we rely on direct IO alignment rules also.
New sysfs files are added to report the following atomic write limits:
- atomic_write_unit_max_bytes - same as atomic_write_unit_max_sectors in
bytes
- atomic_write_unit_min_bytes - same as atomic_write_unit_min_sectors in
bytes
- atomic_write_boundary_bytes - same as atomic_write_hw_boundary_sectors in
bytes
- atomic_write_max_bytes - same as atomic_write_max_sectors in bytes
Atomic writes may only be merged with other atomic writes and only under
the following conditions:
- total resultant request length <= atomic_write_max_bytes
- the merged write does not straddle a boundary
Helper function bdev_can_atomic_write() is added to indicate whether
atomic writes may be issued to a bdev. If a bdev is a partition, the
partition start must be aligned with both atomic_write_unit_min_sectors
and atomic_write_hw_boundary_sectors.
FSes will rely on the block layer to validate that an atomic write BIO
submitted will be of valid size, so add blk_validate_atomic_write_op_size()
for this purpose. Userspace expects an atomic write which is of invalid
size to be rejected with -EINVAL, so add BLK_STS_INVAL for this. Also use
BLK_STS_INVAL for when a BIO needs to be split, as this should mean an
invalid size BIO.
Flag REQ_ATOMIC is used for indicating an atomic write.
Co-developed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20240620125359.2684798-6-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Extend statx system call to return additional info for atomic write support
support for a file.
Helper function generic_fill_statx_atomic_writes() can be used by FSes to
fill in the relevant statx fields. For now atomic_write_segments_max will
always be 1, otherwise some rules would need to be imposed on iovec length
and alignment, which we don't want now.
Signed-off-by: Prasad Singamsetty <prasad.singamsetty@oracle.com>
jpg: relocate bdev support to another patch
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20240620125359.2684798-5-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
An atomic write is a write issued with torn-write protection, meaning
that for a power failure or any other hardware failure, all or none of the
data from the write will be stored, but never a mix of old and new data.
Userspace may add flag RWF_ATOMIC to pwritev2() to indicate that the
write is to be issued with torn-write prevention, according to special
alignment and length rules.
For any syscall interface utilizing struct iocb, add IOCB_ATOMIC for
iocb->ki_flags field to indicate the same.
A call to statx will give the relevant atomic write info for a file:
- atomic_write_unit_min
- atomic_write_unit_max
- atomic_write_segments_max
Both min and max values must be a power-of-2.
Applications can avail of atomic write feature by ensuring that the total
length of a write is a power-of-2 in size and also sized between
atomic_write_unit_min and atomic_write_unit_max, inclusive. Applications
must ensure that the write is at a naturally-aligned offset in the file
wrt the total write length. The value in atomic_write_segments_max
indicates the upper limit for IOV_ITER iovcnt.
Add file mode flag FMODE_CAN_ATOMIC_WRITE, so files which do not have the
flag set will have RWF_ATOMIC rejected and not just ignored.
Add a type argument to kiocb_set_rw_flags() to allows reads which have
RWF_ATOMIC set to be rejected.
Helper function generic_atomic_write_valid() can be used by FSes to verify
compliant writes. There we check for iov_iter type is for ubuf, which
implies iovcnt==1 for pwritev2(), which is an initial restriction for
atomic_write_segments_max. Initially the only user will be bdev file
operations write handler. We will rely on the block BIO submission path to
ensure write sizes are compliant for the bdev, so we don't need to check
atomic writes sizes yet.
Signed-off-by: Prasad Singamsetty <prasad.singamsetty@oracle.com>
jpg: merge into single patch and much rewrite
Acked-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20240620125359.2684798-4-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The purpose of the chunk_sectors limit is to ensure that a mergeble request
fits within the boundary of the chunck_sector value.
Such a feature will be useful for other request_queue boundary limits, so
generalize the chunk_sectors merge code.
This idea was proposed by Hannes Reinecke.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20240620125359.2684798-3-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently blk_queue_get_max_sectors() is passed a enum req_op. In future
the value returned from blk_queue_get_max_sectors() may depend on certain
request flags, so pass a request pointer.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20240620125359.2684798-2-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge in queue limits cleanups.
* for-6.11/block-limits:
block: move the raid_partial_stripes_expensive flag into the features field
block: remove the discard_alignment flag
block: move the misaligned flag into the features field
block: renumber and rename the cache disabled flag
block: fix spelling and grammar for in writeback_cache_control.rst
block: remove the unused blk_bounce enum
`blk_queue_flag_set` and `blk_queue_flag_clear` was removed in favor of a
new API. This caused a build error for Rust block device abstractions.
Thus, use the new feature passing API instead of the old removed API.
Fixes: bd4a633b6f ("block: move the nonrot flag to queue_limits")
Signed-off-by: Andreas Hindborg <a.hindborg@samsung.com>
Link: https://lore.kernel.org/r/20240620085721.1218296-1-nmi@metaspace.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the raid_partial_stripes_expensive flags into the features field to
reclaim a little bit of space.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240619154623.450048-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
queue_limits.discard_alignment is never read except in the places
where it is stacked into another limit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240619154623.450048-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the misaligned flags into the features field to reclaim a little
bit of space.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240619154623.450048-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Start with the first bit, and drop the plural-S from the name.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240619154623.450048-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Suggested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240619154623.450048-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The enum has been replaced with the BLK_FEAT_BOUNCE_HIGH flag.
Reported-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240619154623.450048-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge in last round of queue limits changes from Christoph.
* for-6.11/block-limits: (26 commits)
block: move the bounce flag into the features field
block: move the skip_tagset_quiesce flag to queue_limits
block: move the pci_p2pdma flag to queue_limits
block: move the zone_resetall flag to queue_limits
block: move the zoned flag into the features field
block: move the poll flag to queue_limits
block: move the dax flag to queue_limits
block: move the nowait flag to queue_limits
block: move the synchronous flag to queue_limits
block: move the stable_writes flag to queue_limits
block: move the io_stat flag setting to queue_limits
block: move the add_random flag to queue_limits
block: move the nonrot flag to queue_limits
block: move cache control settings out of queue->flags
block: remove blk_flush_policy
block: freeze the queue in queue_attr_store
nbd: move setting the cache control flags to __nbd_set_size
virtio_blk: remove virtblk_update_cache_mode
loop: fold loop_update_rotational into loop_reconfigure_limits
loop: also use the default block size from an underlying block device
...
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the bounce flag into the features field to reclaim a little bit of
space.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240617060532.127975-27-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the skip_tagset_quiesce flag into the queue_limits feature field so
that it can be set atomically with the queue frozen.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240617060532.127975-26-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the pci_p2pdma flag into the queue_limits feature field so that it
can be set atomically with the queue frozen.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240617060532.127975-25-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the zone_resetall flag into the queue_limits feature field so that
it can be set atomically with the queue frozen.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240617060532.127975-24-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the zoned flags into the features field to reclaim a little
bit of space.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240617060532.127975-23-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the poll flag into the queue_limits feature field so that it can
be set atomically with the queue frozen.
Stacking drivers are simplified in that they now can simply set the
flag, and blk_stack_limits will clear it when the features is not
supported by any of the underlying devices.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240617060532.127975-22-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the dax flag into the queue_limits feature field so that it can be
set atomically with the queue frozen.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240617060532.127975-21-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the nowait flag into the queue_limits feature field so that it can
be set atomically with the queue frozen.
Stacking drivers are simplified in that they now can simply set the
flag, and blk_stack_limits will clear it when the features is not
supported by any of the underlying devices.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240617060532.127975-20-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the synchronous flag into the queue_limits feature field so that it
can be set atomically with the queue frozen.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240617060532.127975-19-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the stable_writes flag into the queue_limits feature field so that
it can be set atomically with the queue frozen.
The flag is now inherited by blk_stack_limits, which greatly simplifies
the code in dm, and fixed md which previously did not pass on the flag
set on lower devices.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240617060532.127975-18-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the io_stat flag into the queue_limits feature field so that it can
be set atomically with the queue frozen.
Simplify md and dm to set the flag unconditionally instead of avoiding
setting a simple flag for cases where it already is set by other means,
which is a bit pointless.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240617060532.127975-17-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the add_random flag into the queue_limits feature field so that it
can be set atomically with the queue frozen.
Note that this also removes code from dm to clear the flag based on
the underlying devices, which can't be reached as dm devices will
always start out without the flag set.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240617060532.127975-16-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the nonrot flag into the queue_limits feature field so that it can
be set atomically with the queue frozen.
Use the chance to switch to defaulting to non-rotational and require
the driver to opt into rotational, which matches the polarity of the
sysfs interface.
For the z2ram, ps3vram, 2x memstick, ubiblock and dcssblk the new
rotational flag is not set as they clearly are not rotational despite
this being a behavior change. There are some other drivers that
unconditionally set the rotational flag to keep the existing behavior
as they arguably can be used on rotational devices even if that is
probably not their main use today (e.g. virtio_blk and drbd).
The flag is automatically inherited in blk_stack_limits matching the
existing behavior in dm and md.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240617060532.127975-15-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the cache control settings into the queue_limits so that the flags
can be set atomically with the device queue frozen.
Add new features and flags field for the driver set flags, and internal
(usually sysfs-controlled) flags in the block layer. Note that we'll
eventually remove enough field from queue_limits to bring it back to the
previous size.
The disable flag is inverted compared to the previous meaning, which
means it now survives a rescan, similar to the max_sectors and
max_discard_sectors user limits.
The FLUSH and FUA flags are now inherited by blk_stack_limits, which
simplified the code in dm a lot, but also causes a slight behavior
change in that dm-switch and dm-unstripe now advertise a write cache
despite setting num_flush_bios to 0. The I/O path will handle this
gracefully, but as far as I can tell the lack of num_flush_bios
and thus flush support is a pre-existing data integrity bug in those
targets that really needs fixing, after which a non-zero num_flush_bios
should be required in dm for targets that map to underlying devices.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240617060532.127975-14-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fold blk_flush_policy into the only caller to prepare for pending changes
to it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20240617060532.127975-13-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
queue_attr_store updates attributes used to control generating I/O, and
can cause malformed bios if changed with I/O in flight. Freeze the queue
in common code instead of adding it to almost every attribute.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20240617060532.127975-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move setting the cache control flags in nbd in preparation for moving
these flags into the queue_limits structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240617060532.127975-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
virtblk_update_cache_mode boils down to a single call to
blk_queue_write_cache. Remove it in preparation for moving the cache
control flags into the queue_limits.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20240617060532.127975-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This prepares for moving the rotational flag into the queue_limits and
also fixes it for the case where the loop device is backed by a block
device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240617060532.127975-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fix the code in loop_reconfigure_limits to pick a default block size for
O_DIRECT file descriptors to also work when the loop device sits on top
of a block device and not just on a regular file on a block device based
file system.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240617060532.127975-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The LOOP_CONFIGURE path automatically upgrades the block size to that
of the underlying file for O_DIRECT file descriptors, but the
LOOP_SET_BLOCK_SIZE path does not. Fix this by lifting the code to
pick the block size into common code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240617060532.127975-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Simplify loop_reconfigure_limits by always updating the discard limits.
This adds a little more work to loop_set_block_size, but doesn't change
the outcome as the discard flag won't change.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240617060532.127975-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
__loop_clr_fd wants to clear all settings on the device. Prepare for
moving more settings into the block limits by open coding
loop_reconfigure_limits.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240617060532.127975-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move a bit of code that sets up the zone flag and the write granularity
into sd_zbc_read_zones to be with the rest of the zoned limits.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240617060532.127975-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since commit 7437bb73f0 ("block: remove support for the host aware zone
model"), only ZBC devices expose a zoned access model. sd_is_zoned is
used to check for that and thus return false for host aware devices.
Replace the helper with the simple open coded TYPE_ZBC check to fix this.
Fixes: 7437bb73f0 ("block: remove support for the host aware zone model")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20240617060532.127975-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blkfront always had a robust negotiation protocol for detecting a write
cache. Stop simply disabling cache flushes in the block layer as the
flags handling is moving to the atomic queue limits API that needs
user context to freeze the queue for that. Instead handle the case
of the feature flags cleared inside of blkfront. This removes old
debug code to check for such a mismatch which was previously impossible
to hit, including the check for passthrough requests that blkfront
never used to start with.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240617060532.127975-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With ARCH=m68k, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/block/z2ram.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20240617-md-m68k-drivers-block-v1-3-b200599a315e@quicinc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With ARCH=m68k, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/block/ataflop.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20240617-md-m68k-drivers-block-v1-2-b200599a315e@quicinc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With ARCH=m68k, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/block/amiflop.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20240617-md-m68k-drivers-block-v1-1-b200599a315e@quicinc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
After commit 35fe6d7632 ("block: use standard blktrace API to output
cgroup info for debug notes"), the field 'bfqg->blkg_path' is not used
and hence can be removed, and therefor blkg_path() is not used anymore
and can be removed.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240618032753.3502528-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
