Pulls in updates in the internal headers from OP-TEE OS [1]. A few
defines has been shortened, hence the changes in rpc.c. Defines not used
by the driver in tee_rpc_cmd.h has been filtered out.
Note that this does not change the ABI.
Link: [1] https://github.com/OP-TEE/optee_os
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Use flexible-array member introduced in C99 instead of zero-length
array. Most of zero-length array was already taken care in previous
patch [1]. Now modified few more cases which were not handled earlier.
[1]. https://patchwork.kernel.org/patch/11394197/
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
There are a couple of subsystems maintained by other people that
merge their drivers through the SoC tree, those changes include:
- The SCMI firmware framework gains support for sensor notifications
and for controlling voltage domains.
- A large update for the Tegra memory controller driver, integrating
it better with the interconnect framework
- The memory controller subsystem gains support for Mediatek MT8192
- The reset controller framework gains support for sharing pulsed
resets
For Soc specific drivers in drivers/soc, the main changes are
- The Allwinner/sunxi MBUS gets a rework for the way it handles
dma_map_ops and offsets between physical and dma address spaces.
- An errata fix plus some cleanups for Freescale Layerscape SoCs
- A cleanup for renesas drivers regarding MMIO accesses.
- New SoC specific drivers for Mediatek MT8192 and MT8183 power domains
- New SoC specific drivers for Aspeed AST2600 LPC bus control
and SoC identification.
- Core Power Domain support for Qualcomm MSM8916, MSM8939, SDM660
and SDX55.
- A rework of the TI AM33xx 'genpd' power domain support to use
information from DT instead of platform data
- Support for TI AM64x SoCs
- Allow building some Amlogic drivers as modules instead of built-in
Finally, there are numerous cleanups and smaller bug fixes for
Mediatek, Tegra, Samsung, Qualcomm, TI OMAP, Amlogic, Rockchips,
Renesas, and Xilinx SoCs.
There is a trivial conflict in the cedrus driver, with two branches
adding the same CEDRUS_CAPABILITY_H265_DEC flag, and another trivial
remove/remove conflict in linux/dma-mapping.h.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=BjJf
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-drivers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"There are a couple of subsystems maintained by other people that merge
their drivers through the SoC tree, those changes include:
- The SCMI firmware framework gains support for sensor notifications
and for controlling voltage domains.
- A large update for the Tegra memory controller driver, integrating
it better with the interconnect framework
- The memory controller subsystem gains support for Mediatek MT8192
- The reset controller framework gains support for sharing pulsed
resets
For Soc specific drivers in drivers/soc, the main changes are
- The Allwinner/sunxi MBUS gets a rework for the way it handles
dma_map_ops and offsets between physical and dma address spaces.
- An errata fix plus some cleanups for Freescale Layerscape SoCs
- A cleanup for renesas drivers regarding MMIO accesses.
- New SoC specific drivers for Mediatek MT8192 and MT8183 power
domains
- New SoC specific drivers for Aspeed AST2600 LPC bus control and SoC
identification.
- Core Power Domain support for Qualcomm MSM8916, MSM8939, SDM660 and
SDX55.
- A rework of the TI AM33xx 'genpd' power domain support to use
information from DT instead of platform data
- Support for TI AM64x SoCs
- Allow building some Amlogic drivers as modules instead of built-in
Finally, there are numerous cleanups and smaller bug fixes for
Mediatek, Tegra, Samsung, Qualcomm, TI OMAP, Amlogic, Rockchips,
Renesas, and Xilinx SoCs"
* tag 'arm-soc-drivers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (222 commits)
soc: mediatek: mmsys: Specify HAS_IOMEM dependency for MTK_MMSYS
firmware: xilinx: Properly align function parameter
firmware: xilinx: Add a blank line after function declaration
firmware: xilinx: Remove additional newline
firmware: xilinx: Fix kernel-doc warnings
firmware: xlnx-zynqmp: fix compilation warning
soc: xilinx: vcu: add missing register NUM_CORE
soc: xilinx: vcu: use vcu-settings syscon registers
dt-bindings: soc: xlnx: extract xlnx, vcu-settings to separate binding
soc: xilinx: vcu: drop useless success message
clk: samsung: mark PM functions as __maybe_unused
soc: samsung: exynos-chipid: initialize later - with arch_initcall
soc: samsung: exynos-chipid: order list of SoCs by name
memory: jz4780_nemc: Fix potential NULL dereference in jz4780_nemc_probe()
memory: ti-emif-sram: only build for ARMv7
memory: tegra30: Support interconnect framework
memory: tegra20: Support hardware versioning and clean up OPP table initialization
dt-bindings: memory: tegra20-emc: Document opp-supported-hw property
soc: rockchip: io-domain: Fix error return code in rockchip_iodomain_probe()
reset-controller: ti: force the write operation when assert or deassert
...
Pull crypto updates from Herbert Xu:
"API:
- Add speed testing on 1420-byte blocks for networking
Algorithms:
- Improve performance of chacha on ARM for network packets
- Improve performance of aegis128 on ARM for network packets
Drivers:
- Add support for Keem Bay OCS AES/SM4
- Add support for QAT 4xxx devices
- Enable crypto-engine retry mechanism in caam
- Enable support for crypto engine on sdm845 in qce
- Add HiSilicon PRNG driver support"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (161 commits)
crypto: qat - add capability detection logic in qat_4xxx
crypto: qat - add AES-XTS support for QAT GEN4 devices
crypto: qat - add AES-CTR support for QAT GEN4 devices
crypto: atmel-i2c - select CONFIG_BITREVERSE
crypto: hisilicon/trng - replace atomic_add_return()
crypto: keembay - Add support for Keem Bay OCS AES/SM4
dt-bindings: Add Keem Bay OCS AES bindings
crypto: aegis128 - avoid spurious references crypto_aegis128_update_simd
crypto: seed - remove trailing semicolon in macro definition
crypto: x86/poly1305 - Use TEST %reg,%reg instead of CMP $0,%reg
crypto: x86/sha512 - Use TEST %reg,%reg instead of CMP $0,%reg
crypto: aesni - Use TEST %reg,%reg instead of CMP $0,%reg
crypto: cpt - Fix sparse warnings in cptpf
hwrng: ks-sa - Add dependency on IOMEM and OF
crypto: lib/blake2s - Move selftest prototype into header file
crypto: arm/aes-ce - work around Cortex-A57/A72 silion errata
crypto: ecdh - avoid unaligned accesses in ecdh_set_secret()
crypto: ccree - rework cache parameters handling
crypto: cavium - Use dma_set_mask_and_coherent to simplify code
crypto: marvell/octeontx - Use dma_set_mask_and_coherent to simplify code
...
Another set of patches for devicetree files and Arm
SoC specific drivers:
- A fix for OP-TEE shared memory on non-SMP systems
- multiple code fixes for the OMAP platform, including
one regression for the CPSW network driver and a few
runtime warning fixes
- Some DT patches for the Rockchip RK3399 platform,
in particular fixing the MMC device ordering that
recently became nondeterministic with async probe.
- Multiple DT fixes for the Tegra platform, including
a regression fix for suspend/resume on TX2
- A regression fix for a user-triggered fault in the
NXP dpio driver
- A regression fix for a bug caused by an earlier bug
fix in the xilinx firmware driver
- Two more DTC warning fixes
- Sylvain Lemieux steps down as maintainer for the
NXP LPC32xx platform
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=yGOq
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-fixes-v5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Another set of patches for devicetree files and Arm SoC specific
drivers:
- A fix for OP-TEE shared memory on non-SMP systems
- multiple code fixes for the OMAP platform, including one regression
for the CPSW network driver and a few runtime warning fixes
- Some DT patches for the Rockchip RK3399 platform, in particular
fixing the MMC device ordering that recently became
nondeterministic with async probe.
- Multiple DT fixes for the Tegra platform, including a regression
fix for suspend/resume on TX2
- A regression fix for a user-triggered fault in the NXP dpio driver
- A regression fix for a bug caused by an earlier bug fix in the
xilinx firmware driver
- Two more DTC warning fixes
- Sylvain Lemieux steps down as maintainer for the NXP LPC32xx
platform"
* tag 'arm-soc-fixes-v5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
arm64: tegra: Fix Tegra234 VDK node names
arm64: tegra: Wrong AON HSP reg property size
arm64: tegra: Fix USB_VBUS_EN0 regulator on Jetson TX1
arm64: tegra: Correct the UART for Jetson Xavier NX
arm64: tegra: Disable the ACONNECT for Jetson TX2
optee: add writeback to valid memory type
firmware: xilinx: Use hash-table for api feature check
firmware: xilinx: Fix SD DLL node reset issue
soc: fsl: dpio: Get the cpumask through cpumask_of(cpu)
ARM: dts: dra76x: m_can: fix order of clocks
bus: ti-sysc: suppress err msg for timers used as clockevent/source
MAINTAINERS: Remove myself as LPC32xx maintainers
arm64: dts: qcom: clear the warnings caused by empty dma-ranges
arm64: dts: broadcom: clear the warnings caused by empty dma-ranges
ARM: dts: am437x-l4: fix compatible for cpsw switch dt node
arm64: dts: rockchip: Reorder LED triggers from mmc devices on rk3399-roc-pc.
arm64: dts: rockchip: Assign a fixed index to mmc devices on rk3399 boards.
arm64: dts: rockchip: Remove system-power-controller from pmic on Odroid Go Advance
arm64: dts: rockchip: fix NanoPi R2S GMAC clock name
ARM: OMAP2+: Manage MPU state properly for omap_enter_idle_coupled()
...
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl+fOigeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGoQ0H/RLJU2FMIjO0mzLX
9LqePQ9QmNWG4KeqxwWaKq90MinIbnSG3CDPKruu8RNh2Rr6nsEJmqg1DWyEiFRB
8gzsBXMAC1i2aPfOrOnCJEfP+L+svKlbSii475tNdZw2DhP+/FBT0RVCt3rRhrRs
atc8+dM7ViGLnlvRJ4LlVqA3d1kjOr5bsPYcIcnGIHY8mYWBLFzTSVgDdrcB9+3l
7lZud/zMhJ3dS0bcnbIUS1YpBxHCsgEaMFQYmcv3RruIaaFbh5THkfQUSmbmrAru
/EeVjwVMuvpvb2jxS1ofLx2in7t4tsNgItu4AfMmV0BurM5NhpqKo7mo/1nmR/X9
Q4tjPRc=
=cUbb
-----END PGP SIGNATURE-----
Backmerge tag 'v5.10-rc2' into arm/drivers
The SCMI pull request for the arm/drivers branch requires v5.10-rc2
because of dependencies with other git trees, so merge that in here.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Only in smp systems the cache policy is setup as write alloc, in
single cpu systems the cache policy is set as writeback and it is
normal memory, so, it should pass the is_normal_memory check in the
share memory registration.
Add the right condition to make it work in no smp systems.
Fixes: cdbcf83d29 ("tee: optee: check type of registered shared memory")
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Currently <crypto/sha.h> contains declarations for both SHA-1 and SHA-2,
and <crypto/sha3.h> contains declarations for SHA-3.
This organization is inconsistent, but more importantly SHA-1 is no
longer considered to be cryptographically secure. So to the extent
possible, SHA-1 shouldn't be grouped together with any of the other SHA
versions, and usage of it should be phased out.
Therefore, split <crypto/sha.h> into two headers <crypto/sha1.h> and
<crypto/sha2.h>, and make everyone explicitly specify whether they want
the declarations for SHA-1, SHA-2, or both.
This avoids making the SHA-1 declarations visible to files that don't
want anything to do with SHA-1. It also prepares for potentially moving
sha1.h into a new insecure/ or dangerous/ directory.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
AMD-TEE driver keeps track of shared memory buffers and their
corresponding buffer id's in a global linked list. These buffers are
used to share data between x86 and AMD Secure Processor. This pull
request fixes issues related to maintaining mapped buffers in a shared
linked list.
-----BEGIN PGP SIGNATURE-----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=kkLP
-----END PGP SIGNATURE-----
Merge tag 'amdtee-fixes-for-5.10' of git://git.linaro.org:/people/jens.wiklander/linux-tee into arm/fixes
AMD-TEE driver bug fixes
AMD-TEE driver keeps track of shared memory buffers and their
corresponding buffer id's in a global linked list. These buffers are
used to share data between x86 and AMD Secure Processor. This pull
request fixes issues related to maintaining mapped buffers in a shared
linked list.
* tag 'amdtee-fixes-for-5.10' of git://git.linaro.org:/people/jens.wiklander/linux-tee:
tee: amdtee: synchronize access to shm list
tee: amdtee: fix memory leak due to reset of global shm list
Link: https://lore.kernel.org/r/20201109080809.GA3862873@jade
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Synchronize access to shm or shared memory buffer list to prevent
race conditions due to concurrent updates to shared shm list by
multiple threads.
Fixes: 757cc3e9ff ("tee: add AMD-TEE driver")
Reviewed-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com>
Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
The driver maintains a list of shared memory buffers along with their
mapped buffer id's in a global linked list. These buffers need to be
unmapped after use by the user-space client.
The global shared memory list is initialized to zero entries in the
function amdtee_open(). This clearing of list entries can be a source
for memory leak on secure side if the global linked list previously
held some mapped buffer entries allocated from another TEE context.
Fix potential memory leak issue by moving global shared memory list
to AMD-TEE driver context data structure.
Fixes: 757cc3e9ff ("tee: add AMD-TEE driver")
Reviewed-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com>
Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Uses export_uuid() to export and uuid_t to an u8 array instead of depending
on the internals of uuid_t.
-----BEGIN PGP SIGNATURE-----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=tsJ3
-----END PGP SIGNATURE-----
Merge tag 'optee-use-uuid-api-for-v5.10' of git://git.linaro.org:/people/jens.wiklander/linux-tee into arm/drivers
Use UUID API to export the UUID
Uses export_uuid() to export and uuid_t to an u8 array instead of depending
on the internals of uuid_t.
* tag 'optee-use-uuid-api-for-v5.10' of git://git.linaro.org:/people/jens.wiklander/linux-tee:
tee: optee: Use UUID API for exporting the UUID
Link: https://lore.kernel.org/r/20201013063612.GA3325842@jade
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The kernel TEE login method was accidentally disabled previously when
enabling a few other login methods, so fix that here.
-----BEGIN PGP SIGNATURE-----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=aCZO
-----END PGP SIGNATURE-----
Merge tag 'tee-fix-for-v5.10' of git://git.linaro.org:/people/jens.wiklander/linux-tee into arm/fixes
Reenable kernel login method for kernel TEE client API
The kernel TEE login method was accidentally disabled previously when
enabling a few other login methods, so fix that here.
* tag 'tee-fix-for-v5.10' of git://git.linaro.org:/people/jens.wiklander/linux-tee:
tee: client UUID: Skip REE kernel login method as well
Link: https://lore.kernel.org/r/20201013070918.GA3328976@jade
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Since the addition of session's client UUID generation via commit [1],
login via REE kernel method was disallowed. So fix that via passing
nill UUID in case of TEE_IOCTL_LOGIN_REE_KERNEL method as well.
Fixes: e33bcbab16 ("tee: add support for session's client UUID generation") [1]
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
There is export_uuid() function which exports uuid_t to the u8 array.
Use it instead of open coding variant.
This allows to hide the uuid_t internals.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Uses cdev_device_add() instead of the cdev_add() device_add()
combination.
Initializes dev->groups instead of direct calls to sysfs_create_group()
and friends.
-----BEGIN PGP SIGNATURE-----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=Knzl
-----END PGP SIGNATURE-----
Merge tag 'tee-dev-cleanup-for-v5.10' of git://git.linaro.org:/people/jens.wiklander/linux-tee into arm/drivers
Simplify tee_device_register() and friends
Uses cdev_device_add() instead of the cdev_add() device_add()
combination.
Initializes dev->groups instead of direct calls to sysfs_create_group()
and friends.
* tag 'tee-dev-cleanup-for-v5.10' of git://git.linaro.org:/people/jens.wiklander/linux-tee:
tee: avoid explicit sysfs_create/delete_group by initialising dev->groups
tee: replace cdev_add + device_add with cdev_device_add
Link: https://lore.kernel.org/r/20200918144130.GB1219771@jade
Signed-off-by: Olof Johansson <olof@lixom.net>
If the dev->groups is initialised, the sysfs group is created as part
of device_add call. There is no need to call sysfs_create/delete_group
explicitly.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Commit 233ed09d7f ("chardev: add helper function to register char devs
with a struct device") added a helper function 'cdev_device_add'.
Make use of cdev_device_add in tee_device_register to replace cdev_add
and device_add. Since cdev_device_add takes care of setting the
kobj->parent, drop explicit initialisation in tee_device_alloc.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
-----BEGIN PGP SIGNATURE-----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=tNe4
-----END PGP SIGNATURE-----
Merge tag 'optee-i2c-fix-for-v5.10' of git://git.linaro.org:/people/jens.wiklander/linux-tee into arm/drivers
Make sure I2C functions used in OP-TEE are reachable with IS_REACHABLE()
* tag 'optee-i2c-fix-for-v5.10' of git://git.linaro.org:/people/jens.wiklander/linux-tee:
drivers: optee: fix i2c build issue
Link: https://lore.kernel.org/r/20200901101806.GA3286324@jade
Signed-off-by: Olof Johansson <olof@lixom.net>
When the optee driver is compiled into the kernel while the i2c core
is configured as a module, the i2c symbols are not available.
This commit addresses the situation by disabling the i2c support for
this use case while allowing it in all other scenarios:
i2c=y, optee=y
i2c=m, optee=m
i2c=y, optee=m
i2c=m, optee=y (not supported)
Fixes: c05210ab97 ("drivers: optee: allow op-tee to access devices on the i2c bus")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
This code was using get_user_pages*(), in a "Case 2" scenario
(DMA/RDMA), using the categorization from [1]. That means that it's
time to convert the get_user_pages*() + put_page() calls to
pin_user_pages*() + unpin_user_pages() calls.
Factor out a new, small release_registered_pages() function, in
order to consolidate the logic for discerning between
TEE_SHM_USER_MAPPED and TEE_SHM_KERNEL_MAPPED pages. This also
absorbs the kfree() call that is also required there.
There is some helpful background in [2]: basically, this is a small
part of fixing a long-standing disconnect between pinning pages, and
file systems' use of those pages.
[1] Documentation/core-api/pin_user_pages.rst
[2] "Explicit pinning of user-space pages":
https://lwn.net/Articles/807108/
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: tee-dev@lists.linaro.org
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Adds support to indicate NULL pointers instead of a valid buffer when
querying the needed size of a buffer.
-----BEGIN PGP SIGNATURE-----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=wZ1T
-----END PGP SIGNATURE-----
Merge tag 'tee-memref-null-for-v5.10' of git://git.linaro.org/people/jens.wiklander/linux-tee into arm/drivers
Handle NULL pointer indication from tee client
Adds support to indicate NULL pointers instead of a valid buffer when
querying the needed size of a buffer.
* tag 'tee-memref-null-for-v5.10' of git://git.linaro.org/people/jens.wiklander/linux-tee:
driver: tee: Handle NULL pointer indication from client
Link: https://lore.kernel.org/r/20200821102535.GA1872111@jade
Signed-off-by: Olof Johansson <olof@lixom.net>
Some secure elements like NXP's SE050 sit on I2C buses. For OP-TEE to
control this type of cryptographic devices it needs coordinated access
to the bus, so collisions and RUNTIME_PM dont get in the way.
This trampoline driver allow OP-TEE to access them.
Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
TEE Client introduce a new capability "TEE_GEN_CAP_MEMREF_NULL"
to handle the support of the shared memory buffer with a NULL pointer.
This capability depends on TEE Capabilities and driver support.
Driver and TEE exchange capabilities at driver initialization.
Signed-off-by: Michael Whitfield <michael.whitfield@nxp.com>
Signed-off-by: Cedric Neveux <cedric.neveux@nxp.com>
Reviewed-by: Joakim Bech <joakim.bech@linaro.org>
Tested-by: Joakim Bech <joakim.bech@linaro.org> (QEMU)
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Probes drivers on the OP-TEE bus in two steps. First for drivers which
do not depend on tee-supplicant. After tee-supplicant has been started
probe the devices which do depend on tee-supplicant.
Also introduces driver which uses an OP-TEE based fTPM Trusted
Application depends on tee-supplicant NV RAM implementation based on
RPMB secure storage.
-----BEGIN PGP SIGNATURE-----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=PDtV
-----END PGP SIGNATURE-----
Merge tag 'optee-bus-for-v5.9' of git://git.linaro.org/people/jens.wiklander/linux-tee into arm/drivers
Enable multi-stage OP-TEE bus enumeration
Probes drivers on the OP-TEE bus in two steps. First for drivers which
do not depend on tee-supplicant. After tee-supplicant has been started
probe the devices which do depend on tee-supplicant.
Also introduces driver which uses an OP-TEE based fTPM Trusted
Application depends on tee-supplicant NV RAM implementation based on
RPMB secure storage.
* tag 'optee-bus-for-v5.9' of git://git.linaro.org/people/jens.wiklander/linux-tee:
tpm_ftpm_tee: register driver on TEE bus
optee: enable support for multi-stage bus enumeration
optee: use uuid for sysfs driver entry
Link: https://lore.kernel.org/r/20200710085230.GA1312913@jade
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Some drivers (like ftpm) can operate only after tee-supplicant
runs because of tee-supplicant provides things like storage
services (rpmb, shm). This patch splits probe of non tee-supplicant
dependable drivers to the early stage, and after tee-supplicant run
probe other drivers.
Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org>
Suggested-by: Sumit Garg <sumit.garg@linaro.org>
Suggested-by: Arnd Bergmann <arnd@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Acked-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
With the evolving use-cases for TEE bus, now it's required to support
multi-stage enumeration process. But using a simple index doesn't
suffice this requirement and instead leads to duplicate sysfs entries.
So instead switch to use more informative device UUID for sysfs entry
like:
/sys/bus/tee/devices/optee-ta-<uuid>
Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
function is also used in the optee driver.
-----BEGIN PGP SIGNATURE-----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=dx75
-----END PGP SIGNATURE-----
Merge tag 'tee-login-for-5.8' of git://git.linaro.org/people/jens.wiklander/linux-tee into arm/drivers
Adds utility function in TEE subsystem for client UUID generation. This
function is also used in the optee driver.
* tag 'tee-login-for-5.8' of git://git.linaro.org/people/jens.wiklander/linux-tee:
tee: optee: Add support for session login client UUID generation
tee: add support for session's client UUID generation
Link: https://lore.kernel.org/r/20200512131243.GA10028@jade
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Adds support for client UUID generation for OP-TEE. For group based session
logins membership is verified.
Signed-off-by: Vesa Jääskeläinen <vesa.jaaskelainen@vaisala.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
TEE Client API defines that from user space only information needed for
specified login operations is group identifier for group based logins.
REE kernel is expected to formulate trustworthy client UUID and pass that
to TEE environment. REE kernel is required to verify that provided group
identifier for group based logins matches calling processes group
memberships.
TEE specification only defines that the information passed from REE
environment to TEE environment is encoded into on UUID.
In order to guarantee trustworthiness of client UUID user space is not
allowed to freely pass client UUID.
UUIDv5 form is used encode variable amount of information needed for
different login types.
Signed-off-by: Vesa Jääskeläinen <vesa.jaaskelainen@vaisala.com>
[jw: remove unused variable application_id]
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
There are use-cases where user-space shouldn't be allowed to communicate
directly with a TEE device which is dedicated to provide a specific
service for a kernel client. So add a private login method for kernel
clients and disallow user-space to open-session using GP implementation
defined login method range: (0x80000000 - 0xBFFFFFFF).
Reviewed-by: Jerome Forissier <jerome@forissier.org>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Enable support to register kernel memory reference with TEE. This change
will allow TEE bus drivers to register memory references.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Smatch complains that "ctx" isn't checked consistently:
drivers/tee/tee_shm.c:164 tee_shm_alloc()
warn: variable dereferenced before check 'ctx' (see line 95)
I audited the callers and "ctx" can't be NULL so the check can be
removed.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
These are the usual updates for SoC specific device drivers and related
subsystems that don't have their own top-level maintainers:
- ARM SCMI/SCPI updates to allow pluggable transport layers
- TEE subsystem cleanups
- A new driver for the Amlogic secure power domain controller
- Various driver updates for the NXP Layerscape DPAA2, NXP i.MX SCU and
TI OMAP2+ sysc drivers.
- Qualcomm SoC driver updates, including a new library module for
"protection domain" notifications
- Lots of smaller bugfixes and cleanups in other drivers
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=qbsP
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM driver updates from Arnd Bergmann:
"These are the usual updates for SoC specific device drivers and
related subsystems that don't have their own top-level maintainers:
- ARM SCMI/SCPI updates to allow pluggable transport layers
- TEE subsystem cleanups
- A new driver for the Amlogic secure power domain controller
- Various driver updates for the NXP Layerscape DPAA2, NXP i.MX SCU
and TI OMAP2+ sysc drivers.
- Qualcomm SoC driver updates, including a new library module for
"protection domain" notifications
- Lots of smaller bugfixes and cleanups in other drivers"
* tag 'arm-drivers-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (70 commits)
soc: fsl: qe: fix sparse warnings for ucc_slow.c
soc: fsl: qe: ucc_slow: remove 0 assignment for kzalloc'ed structure
soc: fsl: qe: fix sparse warnings for ucc_fast.c
soc: fsl: qe: fix sparse warnings for qe_ic.c
soc: fsl: qe: fix sparse warnings for ucc.c
soc: fsl: qe: fix sparse warning for qe_common.c
soc: fsl: qe: fix sparse warnings for qe.c
soc: qcom: Fix QCOM_APR dependencies
soc: qcom: pdr: Avoid uninitialized use of found in pdr_indication_cb
soc: imx: drop COMPILE_TEST for IMX_SCU_SOC
firmware: imx: add COMPILE_TEST for IMX_SCU driver
soc: imx: gpc: fix power up sequencing
soc: imx: increase build coverage for imx8m soc driver
soc: qcom: apr: Add avs/audio tracking functionality
dt-bindings: soc: qcom: apr: Add protection domain bindings
soc: qcom: Introduce Protection Domain Restart helpers
devicetree: bindings: firmware: add ipq806x to qcom_scm
memory: tegra: Correct debugfs clk rate-range on Tegra124
memory: tegra: Correct debugfs clk rate-range on Tegra30
memory: tegra: Correct debugfs clk rate-range on Tegra20
...
Cleanup shared memory handing in TEE subsystem
The highlights are:
- Removing redundant or unused fields in struct tee_shm
- Only assign userspace shm IDs for shared memory objects originating from
user space
* tag 'tee-cleanup-for-5.7' of https://git.linaro.org/people/jens.wiklander/linux-tee:
tee: tee_shm_op_mmap(): use TEE_SHM_USER_MAPPED
tee: remove redundant teedev in struct tee_shm
tee: don't assign shm id for private shms
tee: remove unused tee_shm_priv_alloc()
tee: remove linked list of struct tee_shm
Link: https://lore.kernel.org/r/20200228140925.GA12393@jade
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The "index" is a user provided value from 0-USHRT_MAX. If it's over
TEE_NUM_SESSIONS (31) then it results in an out of bounds read when we
call test_bit(index, sess->sess_mask).
Fixes: 757cc3e9ff ("tee: add AMD-TEE driver")
Acked-by: Rijo Thomas <Rijo-john.Thomas@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
- The compatible for Agilex GMAC should be "altr,socfpga-stmmac-a10-s10"
-----BEGIN PGP SIGNATURE-----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=VAHM
-----END PGP SIGNATURE-----
Merge tag 'socfpga_dts_fix_for_v5.6_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/fixes
arm64: dts: agilex: fix gmac compatible
- The compatible for Agilex GMAC should be "altr,socfpga-stmmac-a10-s10"
* tag 'socfpga_dts_fix_for_v5.6_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: (578 commits)
arm64: dts: socfpga: agilex: Fix gmac compatible
Linux 5.6-rc4
KVM: VMX: check descriptor table exits on instruction emulation
ext4: potential crash on allocation error in ext4_alloc_flex_bg_array()
macintosh: therm_windtunnel: fix regression when instantiating devices
jbd2: fix data races at struct journal_head
kvm: x86: Limit the number of "kvm: disabled by bios" messages
KVM: x86: avoid useless copy of cpufreq policy
KVM: allow disabling -Werror
KVM: x86: allow compiling as non-module with W=1
KVM: Pre-allocate 1 cpumask variable per cpu for both pv tlb and pv ipis
KVM: Introduce pv check helpers
KVM: let declaration of kvm_get_running_vcpus match implementation
KVM: SVM: allocate AVIC data structures based on kvm_amd module parameter
MAINTAINERS: Correct Cadence PCI driver path
io_uring: fix 32-bit compatability with sendmsg/recvmsg
net: dsa: mv88e6xxx: Fix masking of egress port
mlxsw: pci: Wait longer before accessing the device after reset
sfc: fix timestamp reconstruction at 16-bit rollover points
vsock: fix potential deadlock in transport->release()
...
Link: https://lore.kernel.org/r/20200303153509.28248-1-dinguyen@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
tee_shm_op_mmap() uses the TEE_SHM_USER_MAPPED flag instead of the
TEE_SHM_REGISTER flag to tell if a shared memory object is originating
from registered user space memory.
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
The ctx element in struct tee_shm is always valid. So remove the now
redundant teedev element.
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Private shared memory object must not be referenced from user space. To
guarantee that, don't assign an id to shared memory objects which are
driver private.
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
tee_shm_priv_alloc() isn't useful in the current state and it's also not
not used so remove it.
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
On these error paths the "sess" variable isn't freed. It's a refcounted
pointer so we need to call kref_put(). I re-arranged the code a bit so
the error case is always handled before the success case and the error
paths are indented two tabs.
Fixes: 757cc3e9ff ("tee: add AMD-TEE driver")
Reviewed-by: Rijo Thomas <Rijo-john.Thomas@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Pull crypto fixes from Herbert Xu:
"This fixes a Kconfig-related build error and an integer overflow in
chacha20poly1305"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: chacha20poly1305 - prevent integer overflow on large input
tee: amdtee: amdtee depends on CRYPTO_DEV_CCP_DD
If CRYPTO_DEV_CCP_DD=m and AMDTEE=y, the following error is seen
while building call.c or core.c
drivers/tee/amdtee/call.o: In function `handle_unload_ta':
call.c:(.text+0x35f): undefined reference to `psp_tee_process_cmd'
drivers/tee/amdtee/core.o: In function `amdtee_driver_init':
core.c:(.init.text+0xf): undefined reference to `psp_check_tee_status
Fix the config dependency for AMDTEE here.
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 757cc3e9ff ("tee: add AMD-TEE driver")
Signed-off-by: Hongbo Yao <yaohongbo@huawei.com>
Reviewed-by: Rijo Thomas <Rijo-john.Thomas@amd.com>
Acked-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Various driver updates for platforms:
- Nvidia: Fuse support for Tegra194, continued memory controller pieces
for Tegra30
- NXP/FSL: Refactorings of QuickEngine drivers to support ARM/ARM64/PPC
- NXP/FSL: i.MX8MP SoC driver pieces
- TI Keystone: ring accelerator driver
- Qualcomm: SCM driver cleanup/refactoring + support for new SoCs.
- Xilinx ZynqMP: feature checking interface for firmware. Mailbox
communication for power management
- Overall support patch set for cpuidle on more complex hierarchies
(PSCI-based)
+ Misc cleanups, refactorings of Marvell, TI, other platforms.
-----BEGIN PGP SIGNATURE-----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=ONtb
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC-related driver updates from Olof Johansson:
"Various driver updates for platforms:
- Nvidia: Fuse support for Tegra194, continued memory controller
pieces for Tegra30
- NXP/FSL: Refactorings of QuickEngine drivers to support
ARM/ARM64/PPC
- NXP/FSL: i.MX8MP SoC driver pieces
- TI Keystone: ring accelerator driver
- Qualcomm: SCM driver cleanup/refactoring + support for new SoCs.
- Xilinx ZynqMP: feature checking interface for firmware. Mailbox
communication for power management
- Overall support patch set for cpuidle on more complex hierarchies
(PSCI-based)
and misc cleanups, refactorings of Marvell, TI, other platforms"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (166 commits)
drivers: soc: xilinx: Use mailbox IPI callback
dt-bindings: power: reset: xilinx: Add bindings for ipi mailbox
drivers: soc: ti: knav_qmss_queue: Pass lockdep expression to RCU lists
MAINTAINERS: Add brcmstb PCIe controller entry
soc/tegra: fuse: Unmap registers once they are not needed anymore
soc/tegra: fuse: Correct straps' address for older Tegra124 device trees
soc/tegra: fuse: Warn if straps are not ready
soc/tegra: fuse: Cache values of straps and Chip ID registers
memory: tegra30-emc: Correct error message for timed out auto calibration
memory: tegra30-emc: Firm up hardware programming sequence
memory: tegra30-emc: Firm up suspend/resume sequence
soc/tegra: regulators: Do nothing if voltage is unchanged
memory: tegra: Correct reset value of xusb_hostr
soc/tegra: fuse: Add APB DMA dependency for Tegra20
bus: tegra-aconnect: Remove PM_CLK dependency
dt-bindings: mediatek: add MT6765 power dt-bindings
soc: mediatek: cmdq: delete not used define
memory: tegra: Add support for the Tegra194 memory controller
memory: tegra: Only include support for enabled SoCs
memory: tegra: Support DVFS on Tegra186 and later
...
uapi:
- dma-buf heaps added (and fixed)
- command line add support for panel oreientation
- command line allow overriding penguin count
drm:
- mipi dsi definition updates
- lockdep annotations for dma_resv
- remove dma-buf kmap/kunmap support
- constify fb_ops in all fbdev drivers
- MST fix for daisy chained hotplug-
- CTA-861-G modes with VIC >= 193 added
- fix drm_panel_of_backlight export
- LVDS decoder support
- more device based logging support
- scanline alighment for dumb buffers
- MST DSC helpers
scheduler:
- documentation fixes
- job distribution improvements
panel:
- Logic PD type 28 panel support
- Jimax8729d MIPI-DSI
- igenic JZ4770
- generic DSI devicetree bindings
- sony acx424AKP panel
- Leadtek LTK500HD1829
- xinpeng XPP055C272
- AUO B116XAK01
- GiantPlus GPM940B0
- BOE NV140FHM-N49
- Satoz SAT050AT40H12R2
- Sharp LS020B1DD01D panels.
ttm:
- use blocking WW lock
i915:
- hw/uapi state separation
- Lock annotation improvements
- selftest improvements
- ICL/TGL DSI VDSC support
- VBT parsing improvments
- Display refactoring
- DSI updates + fixes
- HDCP 2.2 for CFL
- CML PCI ID fixes
- GLK+ fbc fix
- PSR fixes
- GEN/GT refactor improvments
- DP MST fixes
- switch context id alloc to xarray
- workaround updates
- LMEM debugfs support
- tiled monitor fixes
- ICL+ clock gating programming removed
- DP MST disable sequence fixed
- LMEM discontiguous object maps
- prefaulting for discontiguous objects
- use LMEM for dumb buffers if possible
- add LMEM mmap support
amdgpu:
- enable sync object timelines for vulkan
- MST atomic routines
- enable MST DSC support
- add DMCUB display microengine support
- DC OEM i2c support
- Renoir DC fixes
- Initial HDCP 2.x support
- BACO support for Arcturus
- Use BACO for runtime PM power save
- gfxoff on navi10
- gfx10 golden updates and fixes
- DCN support on POWER
- GFXOFF for raven1 refresh
- MM engine idle handlers cleanup
- 10bpc EDP panel fixes
- renoir watermark fixes
- SR-IOV fixes
- Arcturus VCN fixes
- GDDR6 training fixes
- freesync fixes
- Pollock support
amdkfd:
- unify more codepath with amdgpu
- use KIQ to setup HIQ rather than MMIO
radeon:
- fix vma fault handler race
- PPC DMA fix
- register check fixes for r100/r200
nouveau:
- mmap_sem vs dma_resv fix
- rewrite the ACR secure boot code for Turing
- TU10x graphics engine support (TU11x pending)
- Page kind mapping for turing
- 10-bit LUT support
- GP10B Tegra fixes
- HD audio regression fix
hisilicon/hibmc:
- use generic fbdev code and helpers
rockchip:
- dsi/px30 support
virtio:
- fb damage support
- static some functions
vc4:
- use dma_resv lock wrappers
msm:
- use dma_resv lock wrappers
- sc7180 display + DSI support
- a618 support
- UBWC support improvements
vmwgfx:
- updates + new logging uapi
exynos:
- enable/disable callback cleanups
etnaviv:
- use dma_resv lock wrappers
atmel-hlcdc:
- clock fixes
mediatek:
- cmdq support
- non-smooth cursor fixes
- ctm property support
sun4i:
- suspend support
- A64 mipi dsi support
rcar-du:
- Color management module support
- LVDS encoder dual-link support
- R8A77980 support
analogic:
- add support for an6345
ast:
- atomic modeset support
- primary plane garbage fix
arcgpu:
- fixes for fourcc handling
tegra:
- minor fixes and improvments
mcde:
- vblank support
meson:
- OSD1 plane AFBC commit
gma500:
- add pageflip support
- reomve global drm_dev
komeda:
- tweak debugfs output
- d32 support
- runtime PM suppotr
udl:
- use generic shmem helpers
- cleanup and fixes
-----BEGIN PGP SIGNATURE-----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=oFrI
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2020-01-30' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Davbe Airlie:
"This is the main pull request for graphics for 5.6. Usual selection of
changes all over.
I've got one outstanding vmwgfx pull that touches mm so kept it
separate until after all of this lands. I'll try and get it to you
soon after this, but it might be early next week (nothing wrong with
code, just my schedule is messy)
This also hits a lot of fbdev drivers with some cleanups.
Other notables:
- vulkan timeline semaphore support added to syncobjs
- nouveau turing secureboot/graphics support
- Displayport MST display stream compression support
Detailed summary:
uapi:
- dma-buf heaps added (and fixed)
- command line add support for panel oreientation
- command line allow overriding penguin count
drm:
- mipi dsi definition updates
- lockdep annotations for dma_resv
- remove dma-buf kmap/kunmap support
- constify fb_ops in all fbdev drivers
- MST fix for daisy chained hotplug-
- CTA-861-G modes with VIC >= 193 added
- fix drm_panel_of_backlight export
- LVDS decoder support
- more device based logging support
- scanline alighment for dumb buffers
- MST DSC helpers
scheduler:
- documentation fixes
- job distribution improvements
panel:
- Logic PD type 28 panel support
- Jimax8729d MIPI-DSI
- igenic JZ4770
- generic DSI devicetree bindings
- sony acx424AKP panel
- Leadtek LTK500HD1829
- xinpeng XPP055C272
- AUO B116XAK01
- GiantPlus GPM940B0
- BOE NV140FHM-N49
- Satoz SAT050AT40H12R2
- Sharp LS020B1DD01D panels.
ttm:
- use blocking WW lock
i915:
- hw/uapi state separation
- Lock annotation improvements
- selftest improvements
- ICL/TGL DSI VDSC support
- VBT parsing improvments
- Display refactoring
- DSI updates + fixes
- HDCP 2.2 for CFL
- CML PCI ID fixes
- GLK+ fbc fix
- PSR fixes
- GEN/GT refactor improvments
- DP MST fixes
- switch context id alloc to xarray
- workaround updates
- LMEM debugfs support
- tiled monitor fixes
- ICL+ clock gating programming removed
- DP MST disable sequence fixed
- LMEM discontiguous object maps
- prefaulting for discontiguous objects
- use LMEM for dumb buffers if possible
- add LMEM mmap support
amdgpu:
- enable sync object timelines for vulkan
- MST atomic routines
- enable MST DSC support
- add DMCUB display microengine support
- DC OEM i2c support
- Renoir DC fixes
- Initial HDCP 2.x support
- BACO support for Arcturus
- Use BACO for runtime PM power save
- gfxoff on navi10
- gfx10 golden updates and fixes
- DCN support on POWER
- GFXOFF for raven1 refresh
- MM engine idle handlers cleanup
- 10bpc EDP panel fixes
- renoir watermark fixes
- SR-IOV fixes
- Arcturus VCN fixes
- GDDR6 training fixes
- freesync fixes
- Pollock support
amdkfd:
- unify more codepath with amdgpu
- use KIQ to setup HIQ rather than MMIO
radeon:
- fix vma fault handler race
- PPC DMA fix
- register check fixes for r100/r200
nouveau:
- mmap_sem vs dma_resv fix
- rewrite the ACR secure boot code for Turing
- TU10x graphics engine support (TU11x pending)
- Page kind mapping for turing
- 10-bit LUT support
- GP10B Tegra fixes
- HD audio regression fix
hisilicon/hibmc:
- use generic fbdev code and helpers
rockchip:
- dsi/px30 support
virtio:
- fb damage support
- static some functions
vc4:
- use dma_resv lock wrappers
msm:
- use dma_resv lock wrappers
- sc7180 display + DSI support
- a618 support
- UBWC support improvements
vmwgfx:
- updates + new logging uapi
exynos:
- enable/disable callback cleanups
etnaviv:
- use dma_resv lock wrappers
atmel-hlcdc:
- clock fixes
mediatek:
- cmdq support
- non-smooth cursor fixes
- ctm property support
sun4i:
- suspend support
- A64 mipi dsi support
rcar-du:
- Color management module support
- LVDS encoder dual-link support
- R8A77980 support
analogic:
- add support for an6345
ast:
- atomic modeset support
- primary plane garbage fix
arcgpu:
- fixes for fourcc handling
tegra:
- minor fixes and improvments
mcde:
- vblank support
meson:
- OSD1 plane AFBC commit
gma500:
- add pageflip support
- reomve global drm_dev
komeda:
- tweak debugfs output
- d32 support
- runtime PM suppotr
udl:
- use generic shmem helpers
- cleanup and fixes"
* tag 'drm-next-2020-01-30' of git://anongit.freedesktop.org/drm/drm: (1998 commits)
drm/nouveau/fb/gp102-: allow module to load even when scrubber binary is missing
drm/nouveau/acr: return error when registering LSF if ACR not supported
drm/nouveau/disp/gv100-: not all channel types support reporting error codes
drm/nouveau/disp/nv50-: prevent oops when no channel method map provided
drm/nouveau: support synchronous pushbuf submission
drm/nouveau: signal pending fences when channel has been killed
drm/nouveau: reject attempts to submit to dead channels
drm/nouveau: zero vma pointer even if we only unreference it rather than free
drm/nouveau: Add HD-audio component notifier support
drm/nouveau: fix build error without CONFIG_IOMMU_API
drm/nouveau/kms/nv04: remove set but not used variable 'width'
drm/nouveau/kms/nv50: remove set but not unused variable 'nv_connector'
drm/nouveau/mmu: fix comptag memory leak
drm/nouveau/gr/gp10b: Use gp100_grctx and gp100_gr_zbc
drm/nouveau/pmu/gm20b,gp10b: Fix Falcon bootstrapping
drm/exynos: Rename Exynos to lowercase
drm/exynos: change callback names
drm/mst: Don't do atomic checks over disabled managers
drm/amdgpu: add the lost mutex_init back
drm/amd/display: skip opp blank or unblank if test pattern enabled
...
Pull crypto updates from Herbert Xu:
"API:
- Removed CRYPTO_TFM_RES flags
- Extended spawn grabbing to all algorithm types
- Moved hash descsize verification into API code
Algorithms:
- Fixed recursive pcrypt dead-lock
- Added new 32 and 64-bit generic versions of poly1305
- Added cryptogams implementation of x86/poly1305
Drivers:
- Added support for i.MX8M Mini in caam
- Added support for i.MX8M Nano in caam
- Added support for i.MX8M Plus in caam
- Added support for A33 variant of SS in sun4i-ss
- Added TEE support for Raven Ridge in ccp
- Added in-kernel API to submit TEE commands in ccp
- Added AMD-TEE driver
- Added support for BCM2711 in iproc-rng200
- Added support for AES256-GCM based ciphers for chtls
- Added aead support on SEC2 in hisilicon"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (244 commits)
crypto: arm/chacha - fix build failured when kernel mode NEON is disabled
crypto: caam - add support for i.MX8M Plus
crypto: x86/poly1305 - emit does base conversion itself
crypto: hisilicon - fix spelling mistake "disgest" -> "digest"
crypto: chacha20poly1305 - add back missing test vectors and test chunking
crypto: x86/poly1305 - fix .gitignore typo
tee: fix memory allocation failure checks on drv_data and amdtee
crypto: ccree - erase unneeded inline funcs
crypto: ccree - make cc_pm_put_suspend() void
crypto: ccree - split overloaded usage of irq field
crypto: ccree - fix PM race condition
crypto: ccree - fix FDE descriptor sequence
crypto: ccree - cc_do_send_request() is void func
crypto: ccree - fix pm wrongful error reporting
crypto: ccree - turn errors to debug msgs
crypto: ccree - fix AEAD decrypt auth fail
crypto: ccree - fix typo in comment
crypto: ccree - fix typos in error msgs
crypto: atmel-{aes,sha,tdes} - Retire crypto_platform_data
crypto: x86/sha - Eliminate casts on asm implementations
...
The optee driver uses specific page table types to verify if a memory
region is normal. These types are not defined in nommu systems. Trying
to compile the driver in these systems results in a build error:
linux/drivers/tee/optee/call.c: In function ‘is_normal_memory’:
linux/drivers/tee/optee/call.c:533:26: error: ‘L_PTE_MT_MASK’ undeclared
(first use in this function); did you mean ‘PREEMPT_MASK’?
return (pgprot_val(p) & L_PTE_MT_MASK) == L_PTE_MT_WRITEALLOC;
^~~~~~~~~~~~~
PREEMPT_MASK
linux/drivers/tee/optee/call.c:533:26: note: each undeclared identifier is
reported only once for each function it appears in
linux/drivers/tee/optee/call.c:533:44: error: ‘L_PTE_MT_WRITEALLOC’ undeclared
(first use in this function)
return (pgprot_val(p) & L_PTE_MT_MASK) == L_PTE_MT_WRITEALLOC;
^~~~~~~~~~~~~~~~~~~
Make the optee driver depend on MMU to fix the compilation issue.
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
[jw: update commit title]
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Currently the memory allocation failure checks on drv_data and
amdtee are using IS_ERR rather than checking for a null pointer.
Fix these checks to use the conventional null pointer check.
Addresses-Coverity: ("Dereference null return")
Fixes: 757cc3e9ff ("tee: add AMD-TEE driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Rijo Thomas <Rijo-john.Thomas@amd.com>
Acked-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove NULL check for pool variable, since in the current
code path it is guaranteed to be non-NULL.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Rename err label to err_device_unregister for better
readability.
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently, if tee_device_alloc() fails, then tee_device_unregister()
is a no-op. Therefore, skip the function call to tee_device_unregister() by
introducing a new goto label 'err_free_pool'.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If there is no TEE with which the driver can communicate, then
print an error message and return.
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove unused variable initialization from driver code.
If enabled as a compiler option, compiler may throw warning for
unused assignments.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 757cc3e9ff ("tee: add AMD-TEE driver")
Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The AMD-TEE driver should check if TEE is available before
registering itself with TEE subsystem. This ensures that
there is a TEE which the driver can talk to before proceeding
with tee device node allocation.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Jens Wiklander <jens.wiklander@linaro.org>
Co-developed-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com>
Signed-off-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com>
Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com>
Reviewed-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Adds AMD-TEE driver.
* targets AMD APUs which has AMD Secure Processor with software-based
Trusted Execution Environment (TEE) support
* registers with TEE subsystem
* defines tee_driver_ops function callbacks
* kernel allocated memory is used as shared memory between normal
world and secure world.
* acts as REE (Rich Execution Environment) communication agent, which
uses the services of AMD Secure Processor driver to submit commands
for processing in TEE environment
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Jens Wiklander <jens.wiklander@linaro.org>
Co-developed-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com>
Signed-off-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com>
Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com>
Reviewed-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Allow compilation of tee subsystem for AMD's CPUs which have a dedicated
AMD Secure Processor for Trusted Execution Environment (TEE).
Acked-by: Jens Wiklander <jens.wiklander@linaro.org>
Co-developed-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com>
Signed-off-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com>
Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com>
Reviewed-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
optee_shm_register() expected pages to be passed as an array of page
pointers rather than as an array of contiguous pages. So fix that via
correctly passing pages as per expectation.
Fixes: a249dd200d ("tee: optee: Fix dynamic shm pool allocations")
Reported-by: Vincent Cao <vincent.t.cao@intel.com>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Tested-by: Vincent Cao <vincent.t.cao@intel.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
To simplify adding ACPI support to the OP-TEE driver, model it as
a platform driver. This will permit us to use the generic device
property layer for parsing additional properties, regardless of
whether DT or ACPI is being used.
Note that this change will result in the OP-TEE driver to be loaded
automatically on systems that advertise the presence of OP-TEE via
the device tree.
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
UAPI Changes:
- Add support for DMA-BUF HEAPS.
Cross-subsystem Changes:
- mipi dsi definition updates, pulled into drm-intel as well.
- Add lockdep annotations for dma_resv vs mmap_sem and fs_reclaim.
- Remove support for dma-buf kmap/kunmap.
- Constify fb_ops in all fbdev drivers, including drm drivers and drm-core, and media as well.
Core Changes:
- Small cleanups to ttm.
- Fix SCDC definition.
- Assorted cleanups to core.
- Add todo to remove load/unload hooks, and use generic fbdev emulation.
- Assorted documentation updates.
- Use blocking ww lock in ttm fault handler.
- Remove drm_fb_helper_fbdev_setup/teardown.
- Warning fixes with W=1 for atomic.
- Use drm_debug_enabled() instead of drm_debug flag testing in various drivers.
- Fallback to nontiled mode in fbdev emulation when not all tiles are present. (Later on reverted)
- Various kconfig indentation fixes in core and drivers.
- Fix freeing transactions in dp-mst correctly.
- Sean Paul is steping down as core maintainer. :-(
- Add lockdep annotations for atomic locks vs dma-resv.
- Prevent use-after-free for a bad job in drm_scheduler.
- Fill out all block sizes in the P01x and P210 definitions.
- Avoid division by zero in drm/rect, and fix bounds.
- Add drm/rect selftests.
- Add aspect ratio and alternate clocks for HDMI 4k modes.
- Add todo for drm_framebuffer_funcs and fb_create cleanup.
- Drop DRM_AUTH for prime import/export ioctls.
- Clear DP-MST payload id tables downstream when initializating.
- Fix for DSC throughput definition.
- Add extra FEC definitions.
- Fix fake offset in drm_gem_object_funs.mmap.
- Stop using encoder->bridge in core directly
- Handle bridge chaining slightly better.
- Add backlight support to drm/panel, and use it in many panel drivers.
- Increase max number of y420 modes from 128 to 256, as preparation to add the new modes.
Driver Changes:
- Small fixes all over.
- Fix documentation in vkms.
- Fix mmap_sem vs dma_resv in nouveau.
- Small cleanup in komeda.
- Add page flip support in gma500 for psb/cdv.
- Add ddc symlink in the connector sysfs directory for many drivers.
- Add support for analogic an6345, and fix small bugs in it.
- Add atomic modesetting support to ast.
- Fix radeon fault handler VMA race.
- Switch udl to use generic shmem helpers.
- Unconditional vblank handling for mcde.
- Miscellaneous fixes to mcde.
- Tweak debug output from komeda using debugfs.
- Add gamma and color transform support to komeda for DOU-IPS.
- Add support for sony acx424AKP panel.
- Various small cleanups to gma500.
- Use generic fbdev emulation in udl, and replace udl_framebuffer with generic implementation.
- Add support for Logic PD Type 28 panel.
- Use drm_panel_* wrapper functions in exynos/tegra/msm.
- Add devicetree bindings for generic DSI panels.
- Don't include drm_pci.h directly in many drivers.
- Add support for begin/end_cpu_access in udmabuf.
- Stop using drm_get_pci_dev in gma500 and mga200.
- Fixes to UDL damage handling, and use dma_buf_begin/end_cpu_access.
- Add devfreq thermal support to panfrost.
- Fix hotplug with daisy chained monitors by removing VCPI when disabling topology manager.
- meson: Add support for OSD1 plane AFBC commit.
- Stop displaying garbage when toggling ast primary plane on/off.
- More cleanups and fixes to UDL.
- Add D32 suport to komeda.
- Remove globle copy of drm_dev in gma500.
- Add support for Boe Himax8279d MIPI-DSI LCD panel.
- Add support for ingenic JZ4770 panel.
- Small null pointer deference fix in ingenic.
- Remove support for the special tfp420 driver, as there is a generic way to do it.
-----BEGIN PGP SIGNATURE-----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=b15X
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2019-12-16' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.6:
UAPI Changes:
- Add support for DMA-BUF HEAPS.
Cross-subsystem Changes:
- mipi dsi definition updates, pulled into drm-intel as well.
- Add lockdep annotations for dma_resv vs mmap_sem and fs_reclaim.
- Remove support for dma-buf kmap/kunmap.
- Constify fb_ops in all fbdev drivers, including drm drivers and drm-core, and media as well.
Core Changes:
- Small cleanups to ttm.
- Fix SCDC definition.
- Assorted cleanups to core.
- Add todo to remove load/unload hooks, and use generic fbdev emulation.
- Assorted documentation updates.
- Use blocking ww lock in ttm fault handler.
- Remove drm_fb_helper_fbdev_setup/teardown.
- Warning fixes with W=1 for atomic.
- Use drm_debug_enabled() instead of drm_debug flag testing in various drivers.
- Fallback to nontiled mode in fbdev emulation when not all tiles are present. (Later on reverted)
- Various kconfig indentation fixes in core and drivers.
- Fix freeing transactions in dp-mst correctly.
- Sean Paul is steping down as core maintainer. :-(
- Add lockdep annotations for atomic locks vs dma-resv.
- Prevent use-after-free for a bad job in drm_scheduler.
- Fill out all block sizes in the P01x and P210 definitions.
- Avoid division by zero in drm/rect, and fix bounds.
- Add drm/rect selftests.
- Add aspect ratio and alternate clocks for HDMI 4k modes.
- Add todo for drm_framebuffer_funcs and fb_create cleanup.
- Drop DRM_AUTH for prime import/export ioctls.
- Clear DP-MST payload id tables downstream when initializating.
- Fix for DSC throughput definition.
- Add extra FEC definitions.
- Fix fake offset in drm_gem_object_funs.mmap.
- Stop using encoder->bridge in core directly
- Handle bridge chaining slightly better.
- Add backlight support to drm/panel, and use it in many panel drivers.
- Increase max number of y420 modes from 128 to 256, as preparation to add the new modes.
Driver Changes:
- Small fixes all over.
- Fix documentation in vkms.
- Fix mmap_sem vs dma_resv in nouveau.
- Small cleanup in komeda.
- Add page flip support in gma500 for psb/cdv.
- Add ddc symlink in the connector sysfs directory for many drivers.
- Add support for analogic an6345, and fix small bugs in it.
- Add atomic modesetting support to ast.
- Fix radeon fault handler VMA race.
- Switch udl to use generic shmem helpers.
- Unconditional vblank handling for mcde.
- Miscellaneous fixes to mcde.
- Tweak debug output from komeda using debugfs.
- Add gamma and color transform support to komeda for DOU-IPS.
- Add support for sony acx424AKP panel.
- Various small cleanups to gma500.
- Use generic fbdev emulation in udl, and replace udl_framebuffer with generic implementation.
- Add support for Logic PD Type 28 panel.
- Use drm_panel_* wrapper functions in exynos/tegra/msm.
- Add devicetree bindings for generic DSI panels.
- Don't include drm_pci.h directly in many drivers.
- Add support for begin/end_cpu_access in udmabuf.
- Stop using drm_get_pci_dev in gma500 and mga200.
- Fixes to UDL damage handling, and use dma_buf_begin/end_cpu_access.
- Add devfreq thermal support to panfrost.
- Fix hotplug with daisy chained monitors by removing VCPI when disabling topology manager.
- meson: Add support for OSD1 plane AFBC commit.
- Stop displaying garbage when toggling ast primary plane on/off.
- More cleanups and fixes to UDL.
- Add D32 suport to komeda.
- Remove globle copy of drm_dev in gma500.
- Add support for Boe Himax8279d MIPI-DSI LCD panel.
- Add support for ingenic JZ4770 panel.
- Small null pointer deference fix in ingenic.
- Remove support for the special tfp420 driver, as there is a generic way to do it.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ba73535a-9334-5302-2e1f-5208bd7390bd@linux.intel.com
This brings in the mainline tree right after armsoc contents was merged
this release cycle, so that we can re-run savedefconfig, etc.
Signed-off-by: Olof Johansson <olof@lixom.net>
Prior to this patch in optee_probe() when optee_enumerate_devices() was
called the struct optee was fully initialized. If
optee_enumerate_devices() returns an error optee_probe() is supposed to
clean up and free the struct optee completely, but will at this late
stage need to call optee_remove() instead. This isn't done and thus
freeing the struct optee prematurely.
With this patch the call to optee_enumerate_devices() is done after
optee_probe() has returned successfully and in case
optee_enumerate_devices() fails everything is cleaned up with a call to
optee_remove().
Fixes: c3fa24af92 ("tee: optee: add TEE bus device enumeration support")
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
In case of dynamic shared memory pool, kernel memory allocated using
dmabuf_mgr pool needs to be registered with OP-TEE prior to its usage
during optee_open_session() or optee_invoke_func().
So fix dmabuf_mgr pool allocations via an additional call to
optee_shm_register().
Also, allow kernel pages to be registered as shared memory with OP-TEE.
Fixes: 9733b072a1 ("optee: allow to work without static shared memory")
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
The .ioctl and .compat_ioctl file operations have the same prototype so
they can both point to the same function, which works great almost all
the time when all the commands are compatible.
One exception is the s390 architecture, where a compat pointer is only
31 bit wide, and converting it into a 64-bit pointer requires calling
compat_ptr(). Most drivers here will never run in s390, but since we now
have a generic helper for it, it's easy enough to use it consistently.
I double-checked all these drivers to ensure that all ioctl arguments
are used as pointers or are ignored, but are not interpreted as integer
values.
Acked-by: Jason Gunthorpe <jgg@mellanox.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: David Sterba <dsterba@suse.com>
Acked-by: Darren Hart (VMware) <dvhart@infradead.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This patch is a part of a series that extends kernel ABI to allow to pass
tagged user pointers (with the top byte set to something else other than
0x00) as syscall arguments.
tee_shm_register()->optee_shm_unregister()->check_mem_type() uses provided
user pointers for vma lookups (via __check_mem_type()), which can only by
done with untagged pointers.
Untag user pointers in this function.
Link: http://lkml.kernel.org/r/4b993f33196b3566ac81285ff8453219e2079b45.1563904656.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Eric Auger <eric.auger@redhat.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If the kernel is compiled with CONFIG_PREEMPT_VOLUNTARY and OP-TEE is
executing a long running workload, the following errors are raised:
[ 1705.971228] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
[ 1705.977195] rcu: (detected by 0, t=2102 jiffies, g=51977, q=3)
[ 1705.983152] rcu: All QSes seen, last rcu_sched kthread activity 2102 (140596-138494), jiffies_till_next_fqs=1, root ->qsmask 0x0
[ 1705.994729] optee-xtest R running task 0 169 157 0x00000002
While OP-TEE is returning regularly to the kernel due to timer
interrupts, the OPTEE_SMC_FUNC_FOREIGN_INTR case does not contain an
explicit rescheduling point. Add a might_sleep() to the RPC request case
to ensure that the kernel can reschedule another task if OP-TEE requests
RPC handling.
Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Based on 1 normalized pattern(s):
this software is licensed under the terms of the gnu general public
license version 2 as published by the free software foundation and
may be copied distributed and modified under those terms this
program is distributed in the hope that it will be useful but
without any warranty without even the implied warranty of
merchantability or fitness for a particular purpose see the gnu
general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 285 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141900.642774971@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Various driver updates for platforms and a couple of the small driver
subsystems we merge through our tree:
Among the larger pieces:
- Power management improvements for TI am335x and am437x (RTC suspend/wake)
- Misc new additions for Amlogic (socinfo updates)
- ZynqMP FPGA manager
- Nvidia improvements for reset/powergate handling
- PMIC wrapper for Mediatek MT8516
- Misc fixes/improvements for ARM SCMI, TEE, NXP i.MX SCU drivers
-----BEGIN PGP SIGNATURE-----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=YSfu
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC-related driver updates from Olof Johansson:
"Various driver updates for platforms and a couple of the small driver
subsystems we merge through our tree:
Among the larger pieces:
- Power management improvements for TI am335x and am437x (RTC
suspend/wake)
- Misc new additions for Amlogic (socinfo updates)
- ZynqMP FPGA manager
- Nvidia improvements for reset/powergate handling
- PMIC wrapper for Mediatek MT8516
- Misc fixes/improvements for ARM SCMI, TEE, NXP i.MX SCU drivers"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (57 commits)
soc: aspeed: fix Kconfig
soc: add aspeed folder and misc drivers
spi: zynqmp: Fix build break
soc: imx: Add generic i.MX8 SoC driver
MAINTAINERS: Update email for Qualcomm SoC maintainer
memory: tegra: Fix a typos for "fdcdwr2" mc client
Revert "ARM: tegra: Restore memory arbitration on resume from LP1 on Tegra30+"
memory: tegra: Replace readl-writel with mc_readl-mc_writel
memory: tegra: Fix integer overflow on tick value calculation
memory: tegra: Fix missed registers values latching
ARM: tegra: cpuidle: Handle tick broadcasting within cpuidle core on Tegra20/30
optee: allow to work without static shared memory
soc/tegra: pmc: Move powergate initialisation to probe
soc/tegra: pmc: Remove reset sysfs entries on error
soc/tegra: pmc: Fix reset sources and levels
soc: amlogic: meson-gx-pwrc-vpu: Add support for G12A
soc: amlogic: meson-gx-pwrc-vpu: Fix power on/off register bitmask
fpga manager: Adding FPGA Manager support for Xilinx zynqmp
dt-bindings: fpga: Add bindings for ZynqMP fpga driver
firmware: xilinx: Add fpga API's
...
To facilitate additional options to get_user_pages_fast() change the
singular write parameter to be gup_flags.
This patch does not change any functionality. New functionality will
follow in subsequent patches.
Some of the get_user_pages_fast() call sites were unchanged because they
already passed FOLL_WRITE or 0 for the write parameter.
NOTE: It was suggested to change the ordering of the get_user_pages_fast()
arguments to ensure that callers were converted. This breaks the current
GUP call site convention of having the returned pages be the final
parameter. So the suggestion was rejected.
Link: http://lkml.kernel.org/r/20190328084422.29911-4-ira.weiny@intel.com
Link: http://lkml.kernel.org/r/20190317183438.2057-4-ira.weiny@intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marshall <hubcap@omnibond.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=AE1r
-----END PGP SIGNATURE-----
Merge tag 'tee-optee-for-5.2' of http://git.linaro.org:/people/jens.wiklander/linux-tee into arm/drivers
Allow OP-TEE driver to work without static shared memory
* tag 'tee-optee-for-5.2' of http://git.linaro.org:/people/jens.wiklander/linux-tee:
optee: allow to work without static shared memory
Signed-off-by: Olof Johansson <olof@lixom.net>
On virtualized systems it is possible that OP-TEE will provide
only dynamic shared memory support. So it is fine to boot
without static SHM enabled if dymanic one is supported.
Signed-off-by: Volodymyr Babchuk <vlad.babchuk@gmail.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
As usual, the drivers/tee and drivers/reset subsystems get merged
here, with the expected set of smaller updates and some new hardware
support. The tee subsystem now supports device drivers to be attached
to a tee, the first example here is a random number driver with its
implementation in the secure world.
Three new power domain drivers get added for specific chip families:
- Broadcom BCM283x chips (used in Raspberry Pi)
- Qualcomm Snapdragon phone chips
- Xilinx ZynqMP FPGA SoCs
One new driver is added to talk to the BPMP firmware on NVIDIA
Tegra210
Existing drivers are extended for new SoC variants from NXP,
NVIDIA, Amlogic and Qualcomm.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=+DOl
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"As usual, the drivers/tee and drivers/reset subsystems get merged
here, with the expected set of smaller updates and some new hardware
support. The tee subsystem now supports device drivers to be attached
to a tee, the first example here is a random number driver with its
implementation in the secure world.
Three new power domain drivers get added for specific chip families:
- Broadcom BCM283x chips (used in Raspberry Pi)
- Qualcomm Snapdragon phone chips
- Xilinx ZynqMP FPGA SoCs
One new driver is added to talk to the BPMP firmware on NVIDIA
Tegra210
Existing drivers are extended for new SoC variants from NXP, NVIDIA,
Amlogic and Qualcomm"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (113 commits)
tee: optee: update optee_msg.h and optee_smc.h to dual license
tee: add cancellation support to client interface
dpaa2-eth: configure the cache stashing amount on a queue
soc: fsl: dpio: configure cache stashing destination
soc: fsl: dpio: enable frame data cache stashing per software portal
soc: fsl: guts: make fsl_guts_get_svr() static
hwrng: make symbol 'optee_rng_id_table' static
tee: optee: Fix unsigned comparison with less than zero
hwrng: Fix unsigned comparison with less than zero
tee: fix possible error pointer ctx dereferencing
hwrng: optee: Initialize some structs using memset instead of braces
tee: optee: Initialize some structs using memset instead of braces
soc: fsl: dpio: fix memory leak of a struct qbman on error exit path
clk: tegra: dfll: Make symbol 'tegra210_cpu_cvb_tables' static
soc: qcom: llcc-slice: Fix typos
qcom: soc: llcc-slice: Consolidate some code
qcom: soc: llcc-slice: Clear the global drv_data pointer on error
drivers: soc: xilinx: Add ZynqMP power domain driver
firmware: xilinx: Add APIs to control node status/power
dt-bindings: power: Add ZynqMP power domain bindings
...
- dual license for optee_msg.h and optee_smc.h
Generic
- add cancellation support to client interface
-----BEGIN PGP SIGNATURE-----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=h0Es
-----END PGP SIGNATURE-----
Merge tag 'tee-misc-for-v5.1' of https://git.linaro.org/people/jens.wiklander/linux-tee into arm/drivers
OP-TEE driver
- dual license for optee_msg.h and optee_smc.h
Generic
- add cancellation support to client interface
* tag 'tee-misc-for-v5.1' of https://git.linaro.org/people/jens.wiklander/linux-tee:
tee: optee: update optee_msg.h and optee_smc.h to dual license
tee: add cancellation support to client interface
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add support of cancellation request to the TEE kernel internal
client interface. Can be used by software TPM drivers, that leverage
TEE under the hood (for instance TPM2.0 mobile profile), for requesting
cancellation of time-consuming operations (RSA key-pair generation etc.).
Signed-off-by: Igor Opaniuk <igor.opaniuk@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Add an of_node_put when a tested device node is not available.
The semantic patch that fixes this problem is as follows
(http://coccinelle.lip6.fr):
// <smpl>
@@
identifier f;
local idexpression e;
expression x;
@@
e = f(...);
... when != of_node_put(e)
when != x = e
when != e = x
when any
if (<+...of_device_is_available(e)...+>) {
... when != of_node_put(e)
(
return e;
|
+ of_node_put(e);
return ...;
)
}
// </smpl>
Fixes: db878f76b9 ("tee: optee: take DT status property into account")
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
The return from the call to tee_client_invoke_func can be a
negative error code however this is being assigned to an
unsigned variable 'ret' hence the check is always false.
Fix this by making 'ret' an int.
Detected by Coccinelle ("Unsigned expression compared with zero:
ret < 0")
Fixes: c3fa24af92 ("tee: optee: add TEE bus device enumeration support")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add check for valid ctx pointer and then only dereference ctx to
configure supp_nowait flag.
Fixes: 42bf4152d8 ("tee: add supp_nowait flag in tee_context struct")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Clang warns:
drivers/tee/optee/device.c:39:31: warning: suggest braces around
initialization of subobject [-Wmissing-braces]
struct tee_param param[4] = {0};
^
{}
drivers/tee/optee/device.c:92:48: warning: suggest braces around
initialization of subobject [-Wmissing-braces]
struct tee_ioctl_open_session_arg sess_arg = {0};
^
{}
2 warnings generated.
One way to fix these warnings is to add additional braces like Clang
suggests; however, there has been a bit of push back from some
maintainers, who just prefer memset as it is unambiguous, doesn't
depend on a particular compiler version, and properly initializes all
subobjects [1][2]. Do that here so there are no more warnings.
[1]: https://lore.kernel.org/lkml/022e41c0-8465-dc7a-a45c-64187ecd9684@amd.com/
[2]: https://lore.kernel.org/lkml/20181128.215241.702406654469517539.davem@davemloft.net/
Fixes: c3fa24af92 ("tee: optee: add TEE bus device enumeration support")
Link: https://github.com/ClangBuiltLinux/linux/issues/370
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
OP-TEE provides a pseudo TA to enumerate TAs which can act as devices/
services for TEE bus. So implement device enumeration using invoke
function: PTA_CMD_GET_DEVICES provided by pseudo TA to fetch array of
device UUIDs. Also register these enumerated devices with TEE bus as
"optee-clntX" device.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
[jw: fix optee_enumerate_devices() with no devices found]
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Introduce a generic TEE bus driver concept for TEE based kernel drivers
which would like to communicate with TEE based devices/services. Also
add support in module device table for these new TEE based devices.
In this TEE bus concept, devices/services are identified via Universally
Unique Identifier (UUID) and drivers register a table of device UUIDs
which they can support.
So this TEE bus framework registers following apis:
- match(): Iterates over the driver UUID table to find a corresponding
match for device UUID. If a match is found, then this particular device
is probed via corresponding probe api registered by the driver. This
process happens whenever a device or a driver is registered with TEE
bus.
- uevent(): Notifies user-space (udev) whenever a new device is registered
on this bus for auto-loading of modularized drivers.
Also this framework allows for device enumeration to be specific to
corresponding TEE implementation like OP-TEE etc.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Bhupesh Sharma <bhsharma@redhat.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
This flag indicates that requests in this context should not wait for
tee-supplicant daemon to be started if not present and just return
with an error code. It is needed for requests which should be
non-blocking in nature like ones arising from TEE based kernel drivers
or any in kernel api that uses TEE internal client interface.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Adds a log message in the OP-TEE driver to inform that dynamic shared
memory is enabled.
-----BEGIN PGP SIGNATURE-----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=NJ/O
-----END PGP SIGNATURE-----
Merge tag 'tee-subsys-optee-for-4.21' of https://git.linaro.org/people/jens.wiklander/linux-tee into next/late
OP-TEE dynamic shm log message
Adds a log message in the OP-TEE driver to inform that dynamic shared
memory is enabled.
* tag 'tee-subsys-optee-for-4.21' of https://git.linaro.org/people/jens.wiklander/linux-tee:
tee: optee: log message if dynamic shm is enabled
Signed-off-by: Olof Johansson <olof@lixom.net>
When dynamic shared memory support is enabled in the OP-TEE Trusted
OS, it doesn't mean that the driver supports it, which can confuse
users during debugging. Log a message when dynamic shared memory is
enabled in the driver, to let users know for sure.
Suggested-by: Jerome Forissier <jerome.forissier@linaro.org>
Signed-off-by: Victor Chong <victor.chong@linaro.org>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
This bug occurs when:
- a new request arrives, one thread(let's call it A) is pending in
optee_supp_req() with req->busy is initial value false.
- tee-supplicant is killed, then optee_supp_release() is called, this
function calls list_del(&req->link), and set supp->ctx to NULL. And
it also wake up process A.
- process A continues, it firstly checks supp->ctx which is NULL,
then checks req->busy which is false, at last run list_del(&req->link).
This triggers double list_del() and results kernel panic.
For solve this problem, we rename req->busy to req->in_queue, and
associate it with state of whether req is linked to supp->reqs. So we
can just only check req->in_queue to make decision calling list_del()
or not.
Signed-off-by: Zhizhou Zhang <zhizhouzhang@asrmicro.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
* Adds a kernel internal tee client interface allowing other drivers
etc to access a TEE
* OP-TEE driver takes DT status property into account
-----BEGIN PGP SIGNATURE-----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=E7jv
-----END PGP SIGNATURE-----
Merge tag 'tee-drv-for-4.20' of git://git.linaro.org/people/jens.wiklander/linux-tee into next/drivers
Misc enhancement for tee driver subsystem
* Adds a kernel internal tee client interface allowing other drivers
etc to access a TEE
* OP-TEE driver takes DT status property into account
* tag 'tee-drv-for-4.20' of git://git.linaro.org/people/jens.wiklander/linux-tee:
tee: add kernel internal client interface
tee: optee: take DT status property into account
Signed-off-by: Olof Johansson <olof@lixom.net>
Adds a kernel internal TEE client interface to be used by other drivers.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Tested-by: Sumit Garg <sumit.garg@linaro.org>
Tested-by: Zeng Tao <prime.zeng@hisilicon.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
DT nodes may have a 'status' property which, if set to anything other
than 'ok' or 'okay', indicates to the OS that the DT node should be
treated as if it was not present. So add that missing logic to the
OP-TEE driver.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Some of the larger changes this merge window:
- Removal of drivers for Exynos5440, a Samsung SoC that never saw
widespread use.
- Uniphier support for USB3 and SPI reset handling
- Syste control and SRAM drivers and bindings for Allwinner platforms
- Qualcomm AOSS (Always-on subsystem) reset controller drivers
- Raspberry Pi hwmon driver for voltage
- Mediatek pwrap (pmic) support for MT6797 SoC
-----BEGIN PGP SIGNATURE-----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=ZjwY
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Olof Johansson:
"Some of the larger changes this merge window:
- Removal of drivers for Exynos5440, a Samsung SoC that never saw
widespread use.
- Uniphier support for USB3 and SPI reset handling
- Syste control and SRAM drivers and bindings for Allwinner platforms
- Qualcomm AOSS (Always-on subsystem) reset controller drivers
- Raspberry Pi hwmon driver for voltage
- Mediatek pwrap (pmic) support for MT6797 SoC"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (52 commits)
drivers/firmware: psci_checker: stash and use topology_core_cpumask for hotplug tests
soc: fsl: cleanup Kconfig menu
soc: fsl: dpio: Convert DPIO documentation to .rst
staging: fsl-mc: Remove remaining files
staging: fsl-mc: Move DPIO from staging to drivers/soc/fsl
staging: fsl-dpaa2: eth: move generic FD defines to DPIO
soc: fsl: qe: gpio: Add qe_gpio_set_multiple
usb: host: exynos: Remove support for Exynos5440
clk: samsung: Remove support for Exynos5440
soc: sunxi: Add the A13, A23 and H3 system control compatibles
reset: uniphier: add reset control support for SPI
cpufreq: exynos: Remove support for Exynos5440
ata: ahci-platform: Remove support for Exynos5440
soc: imx6qp: Use GENPD_FLAG_ALWAYS_ON for PU errata
soc: mediatek: pwrap: add mt6351 driver for mt6797 SoCs
soc: mediatek: pwrap: add pwrap driver for mt6797 SoCs
soc: mediatek: pwrap: fix cipher init setting error
dt-bindings: pwrap: mediatek: add pwrap support for MT6797
reset: uniphier: add USB3 core reset control
dt-bindings: reset: uniphier: add USB3 core reset support
...
Neither used nor correctly implemented anywhere. Just completely remove
the interface.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/226645/
This change adds KCONFIG option to set number of pages out of
whole shared memory to be used for OP-TEE driver private data
structures.
Signed-off-by: Sahil Malhotra <sahil.malhotra@nxp.com>
[jw: fixing trivial merge conflict]
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
The two do the same thing, but we want to have a consistent
naming in the kernel.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
This change prevents userland from referencing TEE shared memory
outside the area initially allocated by its owner. Prior this change an
application could not reference or access memory it did not own but
it could reference memory not explicitly allocated by owner but still
allocated to the owner due to the memory allocation granule.
Reported-by: Alexandre Jutras <alexandre.jutras@nxp.com>
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Bump the file's refcount before moving the reference into the fd table,
not afterwards. The old code could drop the file's refcount to zero for a
short moment before calling get_file() via get_dma_buf().
This code can only be triggered on ARM systems that use Linaro's OP-TEE.
Fixes: 967c9cca2c ("tee: generic TEE subsystem")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
When the driver initializes, report the following information
about the OP-TEE OS:
- major and minor version,
- build identifier (if available).
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Matthias Brugger <mbruger@suse.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
In the OPTEE_SMC_CALL_GET_OS_REVISION request, the previously reserved
parameter a2 is now documented as being an optional build identifier
(such as an SCM revision or commit ID, for instance).
A new structure optee_smc_call_get_os_revision_result is introduced to
be used when querying the secure OS version, instead of re-using the
struct defined for OPTEE_SMC_CALLS_REVISION.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Matthias Brugger <mbruger@suse.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
The privileged dev id range is [TEE_NUM_DEVICES / 2, TEE_NUM_DEVICES).
The non-privileged dev id range is [0, TEE_NUM_DEVICES / 2).
So when finding a slot for them, need to use different max value.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
request with five new patches fixing review comments and errors.
Apart from three small fixes there's two larger patches that in the end
checks that memory to be registered really is normal cached memory.
-----BEGIN PGP SIGNATURE-----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=0+NS
-----END PGP SIGNATURE-----
Merge tag 'tee-drv-dynamic-shm+fixes-for-v4.16' of https://git.linaro.org/people/jens.wiklander/linux-tee into next/drivers
This pull request updates the previous tee-drv-dynamic-shm-for-v4.16 pull
request with five new patches fixing review comments and errors.
Apart from three small fixes there's two larger patches that in the end
checks that memory to be registered really is normal cached memory.
* tag 'tee-drv-dynamic-shm+fixes-for-v4.16' of https://git.linaro.org/people/jens.wiklander/linux-tee:
tee: shm: Potential NULL dereference calling tee_shm_register()
tee: shm: don't put_page on null shm->pages
tee: shm: make function __tee_shm_alloc static
tee: optee: check type of registered shared memory
tee: add start argument to shm_register callback
Signed-off-by: Olof Johansson <olof@lixom.net>
get_user_pages_fast() can return zero in certain error paths. We should
handle that or else it means we accidentally return ERR_PTR(0) which is
NULL instead of an error pointer. The callers are not expecting that
and will crash with a NULL dereference.
Fixes: 033ddf12bc ("tee: add register user memory")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
In the case that shm->pages fails to allocate, the current exit
error path will try to put_page on a null shm->pages and cause
a null pointer dereference when accessing shm->pages[n]. Fix this
by only performing the put_page and kfree on shm->pages if it
is not null.
Detected by CoverityScan, CID#1463283 ("Dereference after null check")
Fixes: 033ddf12bc ("tee: add register user memory")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
The function __tee_shm_alloc is local to the source and does
not need to be in global scope, so make it static.
Cleans up sparse warning:
symbol '__tee_shm_alloc' was not declared. Should it be static?
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Checks the memory type of the pages to be registered as shared memory.
Only normal cached memory is allowed.
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Adds a start argument to the shm_register callback to allow the callback
to check memory type of the passed pages.
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
The optee driver includes the header files in an unusual order,
with asm/pgtable.h before the linux/*.h headers. For some reason
this seems to trigger a build failure:
drivers/tee/optee/call.c: In function 'optee_fill_pages_list':
include/asm-generic/memory_model.h:64:14: error: implicit declaration of function 'page_to_section'; did you mean '__nr_to_section'? [-Werror=implicit-function-declaration]
int __sec = page_to_section(__pg); \
drivers/tee/optee/call.c:494:15: note: in expansion of macro 'page_to_phys'
optee_page = page_to_phys(*pages) +
Let's just include linux/mm.h, which will then get the other
header implicitly.
Fixes: 3bb48ba5cd ("tee: optee: add page list manipulation functions")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
subsystem as a whole and in OP-TEE in particular.
Global Platform TEE specification [1] allows client applications
to register part of own memory as a shared buffer between
application and TEE. This allows fast zero-copy communication between
TEE and REE. But current implementation of TEE in Linux does not support
this feature.
Also, current implementation of OP-TEE transport uses fixed size
pre-shared buffer for all communications with OP-TEE OS. This is okay
in the most use cases. But this prevents use of OP-TEE in virtualized
environments, because:
a) We can't share the same buffer between different virtual machines
b) Physically contiguous memory as seen by VM can be non-contiguous
in reality (and as seen by OP-TEE OS) due to second stage of
MMU translation.
c) Size of this pre-shared buffer is limited.
So, first part of this pull request adds generic register/unregister
interface to tee subsystem. The second part adds necessary features into
OP-TEE driver, so it can use not only static pre-shared buffer, but
whole RAM to communicate with OP-TEE OS.
This change is backwards compatible allowing older secure world or
user space to work with newer kernels and vice versa.
[1] https://www.globalplatform.org/specificationsdevice.asp
-----BEGIN PGP SIGNATURE-----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=3iwl
-----END PGP SIGNATURE-----
Merge tag 'tee-drv-dynamic-shm-for-v4.16' of https://git.linaro.org/people/jens.wiklander/linux-tee into next/drivers
Pull "tee dynamic shm for v4.16" from Jens Wiklander:
This pull request enables dynamic shared memory support in the TEE
subsystem as a whole and in OP-TEE in particular.
Global Platform TEE specification [1] allows client applications
to register part of own memory as a shared buffer between
application and TEE. This allows fast zero-copy communication between
TEE and REE. But current implementation of TEE in Linux does not support
this feature.
Also, current implementation of OP-TEE transport uses fixed size
pre-shared buffer for all communications with OP-TEE OS. This is okay
in the most use cases. But this prevents use of OP-TEE in virtualized
environments, because:
a) We can't share the same buffer between different virtual machines
b) Physically contiguous memory as seen by VM can be non-contiguous
in reality (and as seen by OP-TEE OS) due to second stage of
MMU translation.
c) Size of this pre-shared buffer is limited.
So, first part of this pull request adds generic register/unregister
interface to tee subsystem. The second part adds necessary features into
OP-TEE driver, so it can use not only static pre-shared buffer, but
whole RAM to communicate with OP-TEE OS.
This change is backwards compatible allowing older secure world or
user space to work with newer kernels and vice versa.
[1] https://www.globalplatform.org/specificationsdevice.asp
* tag 'tee-drv-dynamic-shm-for-v4.16' of https://git.linaro.org/people/jens.wiklander/linux-tee:
tee: shm: inline tee_shm_get_id()
tee: use reference counting for tee_context
tee: optee: enable dynamic SHM support
tee: optee: add optee-specific shared pool implementation
tee: optee: store OP-TEE capabilities in private data
tee: optee: add registered buffers handling into RPC calls
tee: optee: add registered shared parameters handling
tee: optee: add shared buffer registration functions
tee: optee: add page list manipulation functions
tee: optee: Update protocol definitions
tee: shm: add page accessor functions
tee: shm: add accessors for buffer size and page offset
tee: add register user memory
tee: flexible shared memory pool creation
This pull request enables asynchronous communication with TEE supplicant
by introducing meta parameters in the user space API. The meta
parameters can be used to tag requests with an id that can be matched
against an asynchronous response as is done here in the OP-TEE driver.
Asynchronous supplicant communication is needed by OP-TEE to implement
GlobalPlatforms TEE Sockets API Specification v1.0.1. The specification
is available at https://www.globalplatform.org/specificationsdevice.asp.
This change is backwards compatible allowing older supplicants to work
with newer kernels and vice versa.
-----BEGIN PGP SIGNATURE-----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=jsDo
-----END PGP SIGNATURE-----
Merge tag 'tee-drv-async-supplicant-for-v4.16' of https://git.linaro.org/people/jens.wiklander/linux-tee into next/drivers
Pull "Enable async communication with tee supplicant" from Jens Wiklander:
This pull request enables asynchronous communication with TEE supplicant
by introducing meta parameters in the user space API. The meta
parameters can be used to tag requests with an id that can be matched
against an asynchronous response as is done here in the OP-TEE driver.
Asynchronous supplicant communication is needed by OP-TEE to implement
GlobalPlatforms TEE Sockets API Specification v1.0.1. The specification
is available at https://www.globalplatform.org/specificationsdevice.asp.
This change is backwards compatible allowing older supplicants to work
with newer kernels and vice versa.
* tag 'tee-drv-async-supplicant-for-v4.16' of https://git.linaro.org/people/jens.wiklander/linux-tee:
optee: support asynchronous supplicant requests
tee: add TEE_IOCTL_PARAM_ATTR_META
tee: add tee_param_is_memref() for driver use
Now, when struct tee_shm is defined in public header,
we can inline small getter functions like this one.
Signed-off-by: Volodymyr Babchuk <vlad.babchuk@gmail.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
We need to ensure that tee_context is present until last
shared buffer will be freed.
Signed-off-by: Volodymyr Babchuk <vlad.babchuk@gmail.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Previous patches added various features that are needed for dynamic SHM.
Dynamic SHM allows Normal World to share any buffers with OP-TEE.
While original design suggested to use pre-allocated region (usually of
1M to 2M of size), this new approach allows to use all non-secure RAM for
command buffers, RPC allocations and TA parameters.
This patch checks capability OPTEE_SMC_SEC_CAP_DYNAMIC_SHM. If it was set
by OP-TEE, then kernel part of OP-TEE will use kernel page allocator
to allocate command buffers. Also it will set TEE_GEN_CAP_REG_MEM
capability to tell userspace that it supports shared memory registration.
Signed-off-by: Volodymyr Babchuk <vlad.babchuk@gmail.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
This is simple pool that uses kernel page allocator. This pool can be
used in case OP-TEE supports dynamic shared memory.
Signed-off-by: Volodymyr Babchuk <vlad.babchuk@gmail.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Those capabilities will be used in subsequent patches.
Signed-off-by: Volodymyr Babchuk <vlad.babchuk@gmail.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
With latest changes to OP-TEE we can use any buffers as a shared memory.
Thus, it is possible for supplicant to provide part of own memory
when OP-TEE asks to allocate a shared buffer.
This patch adds support for such feature into RPC handling code.
Now when OP-TEE asks supplicant to allocate shared buffer, supplicant
can use TEE_IOC_SHM_REGISTER to provide such buffer. RPC handler is
aware of this, so it will pass list of allocated pages to OP-TEE.
Signed-off-by: Volodymyr Babchuk <vlad.babchuk@gmail.com>
[jw: fix parenthesis alignment in free_pages_list()]
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Now, when client applications can register own shared buffers in OP-TEE,
we need to extend ABI for parameter passing to/from OP-TEE.
So, if OP-TEE core detects that parameter belongs to registered shared
memory, it will use corresponding parameter attribute.
Signed-off-by: Volodymyr Babchuk <vlad.babchuk@gmail.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
This change adds ops for shm_(un)register functions in tee interface.
Client application can use these functions to (un)register an own shared
buffer in OP-TEE address space. This allows zero copy data sharing between
Normal and Secure Worlds.
Please note that while those functions were added to optee code,
it does not report to userspace that those functions are available.
OP-TEE code does not set TEE_GEN_CAP_REG_MEM flag. This flag will be
enabled only after all other features of dynamic shared memory will be
implemented in subsequent patches. Of course user can ignore presence of
TEE_GEN_CAP_REG_MEM flag and try do call those functions. This is okay,
driver will register shared buffer in OP-TEE, but any attempts to use
this shared buffer will fail.
Signed-off-by: Volodymyr Babchuk <vlad.babchuk@gmail.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
These functions will be used to pass information about shared
buffers to OP-TEE. ABI between Linux and OP-TEE is defined
in optee_msg.h and optee_smc.h.
optee_msg.h defines OPTEE_MSG_ATTR_NONCONTIG attribute
for shared memory references and describes how such references
should be passed. Note that it uses 64-bit page addresses even
on 32 bit systems. This is done to support LPAE and to unify
interface.
Signed-off-by: Volodymyr Babchuk <vlad.babchuk@gmail.com>
[jw: replacing uint64_t with u64 in optee_fill_pages_list()]
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
There were changes in REE<->OP-TEE ABI recently.
Now ABI allows us to pass non-contiguous memory buffers as list of
pages to OP-TEE. This can be achieved by using new parameter attribute
OPTEE_MSG_ATTR_NONCONTIG.
OP-TEE also is able to use all non-secure RAM for shared buffers. This
new capability is enabled with OPTEE_SMC_SEC_CAP_DYNAMIC_SHM flag.
This patch adds necessary definitions to the protocol definition files at
Linux side.
Signed-off-by: Volodymyr Babchuk <vlad.babchuk@gmail.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Added new ioctl to allow users register own buffers as a shared memory.
Signed-off-by: Volodymyr Babchuk <vlad.babchuk@gmail.com>
[jw: moved tee_shm_is_registered() declaration]
[jw: added space after __tee_shm_alloc() implementation]
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Makes creation of shm pools more flexible by adding new more primitive
functions to allocate a shm pool. This makes it easier to add driver
specific shm pool management.
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Volodymyr Babchuk <vlad.babchuk@gmail.com>
Adds support for asynchronous supplicant requests, meaning that the
supplicant can process several requests in parallel or block in a
request for some time.
Acked-by: Etienne Carriere <etienne.carriere@linaro.org>
Tested-by: Etienne Carriere <etienne.carriere@linaro.org> (b2260 pager=y/n)
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Adds TEE_IOCTL_PARAM_ATTR_META which can be used to indicate meta
parameters when communicating with user space. These meta parameters can
be used by supplicant support multiple parallel requests at a time.
Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
The first node supplied to of_find_matching_node() has its reference
counter decreased as part of call to that function. In optee_driver_init()
after calling of_find_matching_node() it's invalid to call of_node_put() on
the supplied node again.
So remove the invalid call to of_node_put().
Reported-by: Alex Shi <alex.shi@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the latest changes of optee_os, the interrupts' names are
changed to "native" and "foreign" interrupts.
Signed-off-by: David Wang <david.wang@arm.com>
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Mirrors the TEE_DESC_PRIVILEGED bit of struct tee_desc:flags into struct
tee_ioctl_version_data:gen_caps as TEE_GEN_CAP_PRIVILEGED in
tee_ioctl_version()
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Prior to this patch RPC sleep was uninterruptible since msleep() is
uninterruptible. Change to use msleep_interruptible() instead.
Signed-off-by: Tiger Yu <tigeryu99@hotmail.com>
Reviewed-by: Joakim Bech <joakim.bech@linaro.org>
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Add const to tee_desc structures as they are only passed as an argument
to the function tee_device_alloc. This argument is of type const, so
declare these structures as const too.
Add const to tee_driver_ops structures as they are only stored in the
ops field of a tee_desc structure. This field is of type const, so
declare these structure types as const.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
dma_buf_ops are not supposed to change at runtime. All functions
working with dma_buf_ops provided by <linux/dma-buf.h> work with
const dma_buf_ops. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
2026 112 0 2138 85a drivers/tee/tee_shm.o
File size After adding 'const':
text data bss dec hex filename
2138 0 0 2138 85a drivers/tee/tee_shm.o
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Fixes the static checker warning in optee_release().
error: uninitialized symbol 'parg'.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZF2pwAAoJEHm+PkMAQRiG9aAIAJJyV6Ux9kaX+glqO3KIs0wm
0K/yqMOv1JTfJ1UUgY4iZbk5XOPPmXv1bdKJFECZfuAHdymJUF/RVNNvDlZbaLdd
K8vDEi92eRwcf07a5b/Q2F8yNfADKKmRAA/oAbuQLBhJ0dPHig70PIvi9gq9kqiE
Ft1MinbsZLavYatLm7oVDr/nsYebEDMGwTy0EX5bF2YjydfAlCvVWnI5ld5wisiV
0fQF4W7MMjjcpAzG8uq3atEB8iQcWS2Ykz2chZRbYzHcdV2WJW751Vge9xc05Hzi
rxlqn6peZFiFyM0qdPLhY0ktGzSTZcCFeb3aZicvm5aOamy2KJjOSZrEwjU8kts=
=VHpx
-----END PGP SIGNATURE-----
Merge tag 'v4.12-rc1' into fixes
We've received a few fixes branches with -rc1 as base, but our contents was
still at pre-rc1. Merge it in expliticly to make 'git merge --log' clear on
hat was actually merged.
Signed-off-by: Olof Johansson <olof@lixom.net>
For the moment, the tee subsystem only makes sense in combination with
the op-tee driver that depends on ARM_SMCCC, so let's hide the subsystem
from users that can't select that.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This branch introduces a generic TEE framework in the kernel, to handle
trusted environemtns (security coprocessor or software implementations
such as OP-TEE/TrustZone). I'm sending it separately from the other
arm-soc driver changes to give it a little more visibility, once
the subsystem is merged, we will likely keep this in the arm₋soc
drivers branch or have the maintainers submit pull requests directly,
depending on the patch volume.
I have reviewed earlier versions in the past, and have reviewed
the latest version in person during Linaro Connect BUD17.
Here is my overall assessment of the subsystem:
* There is clearly demand for this, both for the generic
infrastructure and the specific OP-TEE implementation.
* The code has gone through a large number of reviews,
and the review comments have all been addressed, but
the reviews were not coming up with serious issues any more
and nobody volunteered to vouch for the quality.
* The user space ioctl interface is sufficient to work with the
OP-TEE driver, and it should in principle work with other
TEE implementations that follow the GlobalPlatform[1] standards,
but it might need to be extended in minor ways depending on
specific requirements of future TEE implementations
* The main downside of the API to me is how the user space
is tied to the TEE implementation in hardware or firmware,
but uses a generic way to communicate with it. This seems
to be an inherent problem with what it is trying to do,
and I could not come up with any better solution than what
is implemented here.
For a detailed history of the patch series, see
https://lkml.org/lkml/2017/3/10/1277
Conflicts: needs a fixup after the drm tree was merged, see
https://patchwork.kernel.org/patch/9691679/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=VzpB
-----END PGP SIGNATURE-----
Merge tag 'armsoc-tee' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull TEE driver infrastructure and OP-TEE drivers from Arnd Bergmann:
"This introduces a generic TEE framework in the kernel, to handle
trusted environemtns (security coprocessor or software implementations
such as OP-TEE/TrustZone). I'm sending it separately from the other
arm-soc driver changes to give it a little more visibility, once the
subsystem is merged, we will likely keep this in the arm₋soc drivers
branch or have the maintainers submit pull requests directly,
depending on the patch volume.
I have reviewed earlier versions in the past, and have reviewed the
latest version in person during Linaro Connect BUD17.
Here is my overall assessment of the subsystem:
- There is clearly demand for this, both for the generic
infrastructure and the specific OP-TEE implementation.
- The code has gone through a large number of reviews, and the review
comments have all been addressed, but the reviews were not coming
up with serious issues any more and nobody volunteered to vouch for
the quality.
- The user space ioctl interface is sufficient to work with the
OP-TEE driver, and it should in principle work with other TEE
implementations that follow the GlobalPlatform[1] standards, but it
might need to be extended in minor ways depending on specific
requirements of future TEE implementations
- The main downside of the API to me is how the user space is tied to
the TEE implementation in hardware or firmware, but uses a generic
way to communicate with it. This seems to be an inherent problem
with what it is trying to do, and I could not come up with any
better solution than what is implemented here.
For a detailed history of the patch series, see
https://lkml.org/lkml/2017/3/10/1277"
* tag 'armsoc-tee' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
arm64: dt: hikey: Add optee node
Documentation: tee subsystem and op-tee driver
tee: add OP-TEE driver
tee: generic TEE subsystem
dt/bindings: add bindings for optee
Adds a OP-TEE driver which also can be compiled as a loadable module.
* Targets ARM and ARM64
* Supports using reserved memory from OP-TEE as shared memory
* Probes OP-TEE version using SMCs
* Accepts requests on privileged and unprivileged device
* Uses OPTEE message protocol version 2 to communicate with secure world
Acked-by: Andreas Dannenberg <dannenberg@ti.com>
Tested-by: Jerome Forissier <jerome.forissier@linaro.org> (HiKey)
Tested-by: Volodymyr Babchuk <vlad.babchuk@gmail.com> (RCAR H3)
Tested-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Javier González <javier@javigon.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Initial patch for generic TEE subsystem.
This subsystem provides:
* Registration/un-registration of TEE drivers.
* Shared memory between normal world and secure world.
* Ioctl interface for interaction with user space.
* Sysfs implementation_id of TEE driver
A TEE (Trusted Execution Environment) driver is a driver that interfaces
with a trusted OS running in some secure environment, for example,
TrustZone on ARM cpus, or a separate secure co-processor etc.
The TEE subsystem can serve a TEE driver for a Global Platform compliant
TEE, but it's not limited to only Global Platform TEEs.
This patch builds on other similar implementations trying to solve
the same problem:
* "optee_linuxdriver" by among others
Jean-michel DELORME<jean-michel.delorme@st.com> and
Emmanuel MICHEL <emmanuel.michel@st.com>
* "Generic TrustZone Driver" by Javier González <javier@javigon.com>
Acked-by: Andreas Dannenberg <dannenberg@ti.com>
Tested-by: Jerome Forissier <jerome.forissier@linaro.org> (HiKey)
Tested-by: Volodymyr Babchuk <vlad.babchuk@gmail.com> (RCAR H3)
Tested-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Javier González <javier@javigon.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
