The COM3 register at address 0x0c already defaults to 0x10, the two bits
COM3[7:6] are set according to V4L2 controls by sethvflip later.
There is no need to set it multiple times during bridge initialization.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This register is later overwritten by set_frame_rate anyway.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The video format, payload size, and frame size setup is video format
and frame size specific. Those registers are overwritten during
bridge_start anyway.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Add support to pass through the sensor's native SGBRG8 bayer pattern,
allowing to cut the required USB bandwidth in half.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
In preparation for adding SGBRG8 as a second video format besides YUYV,
move video format specific register settings from the bridge_init array
into the bridge_start arrays.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
If a driver supports multiple pixel formats with the same frame size,
TRY_FMT will currently always return the first pixel format.
Fix this by adding pixelformat support to wxh_to_nearest_mode().
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
If a driver supports multiple pixel formats with the same frame size,
ENUM_FRAMEINTERVALS will currently only work for the first pixel format.
Fix this by adding pixelformat support to wxh_to_mode().
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
For short waits, usleep_range should be used instead of msleep,
see Documentation/timers/timers-howto.txt.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
In mt9m111_probe, m5602_write_bridge can timeout and return a negative
error value. The fix checks for this error and passes it upstream.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
In po1030_probe(), m5602_write_bridge() can timeout and return an error
value. The fix checks for the return value and propagates upstream
consistent with other usb drivers.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The fix checks if goto_low_power() fails, and if so, issues an error
message.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
do_command() may fail. The fix adds the missed return value of
do_command(). If it fails, returns its error code.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Control events can leak kernel memory since they do not fully zero the
event. The same code is present in both v4l2-ctrls.c and uvc_ctrl.c, so
fix both.
It appears that all other event code is properly zeroing the structure,
it's these two places.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: syzbot+4f021cf3697781dbd9fb@syzkaller.appspotmail.com
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
DMA cocherency slows the transfer down on systems without hardware
coherent DMA.
Instead we use noncocherent DMA memory and explicit sync at data receive
handler.
Based on previous commit the following performance benchmarks have been
carried out. Average memcpy() data transfer rate (rate) and handler
completion time (time) have been measured when running video stream at
640x480 resolution at 10fps.
x86_64 based system (Intel Core i5-3470). This platform has hardware
coherent DMA support and proposed change doesn't make big difference here.
* kmalloc: rate = (2.0 +- 0.4) GBps
time = (5.0 +- 3.0) usec
* usb_alloc_coherent: rate = (3.4 +- 1.2) GBps
time = (3.5 +- 3.0) usec
We see that the measurements agree within error ranges in this case.
So theoretically predicted performance downgrade cannot be reliably
measured here.
armv7l based system (TI AM335x BeagleBone Black @ 300MHz). This platform
has no hardware coherent DMA support. DMA coherence is implemented via
disabled page caching that slows down memcpy() due to memory controller
behaviour.
* kmalloc: rate = ( 94 +- 4) MBps
time = (101 +- 4) usec
* usb_alloc_coherent: rate = (28.1 +- 0.1) MBps
time = (341 +- 2) usec
Note, that quantative difference leads (this commit leads to 3.3 times
acceleration) to qualitative behavior change in this case. As it was
stated before, the video stream cannot be successfully received at AM335x
platforms with MUSB based USB host controller due to performance issues
[1].
[1] https://www.spinics.net/lists/linux-usb/msg165735.html
Signed-off-by: Matwey V. Kornilov <matwey@sai.msu.ru>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
There were reports that PWC-based webcams don't work at some
embedded ARM platforms. [1] Isochronous transfer handler seems to
work too long leading to the issues in MUSB USB host subsystem.
Also note, that urb->giveback() handlers are still called with
disabled interrupts. In order to be able to measure performance of
PWC driver, traces are introduced in URB handler section.
[1] https://www.spinics.net/lists/linux-usb/msg165735.html
Signed-off-by: Matwey V. Kornilov <matwey@sai.msu.ru>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
kmemdup has implemented the function that kmalloc() + memcpy().
We prefer to kmemdup rather than code opened implementation.
This issue was detected with the help of coccinelle.
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
CC: Tomoki Sekiyama <tomoki.sekiyama@gmail.com>
CC: linux-kernel@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
There is a spelling mistake in a pvr2_trace trace message, fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Interrupt is always present throughout life time of driver and
there is no dma element move this buffer to private area of driver.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The interrupt urb is killed but never freed add the function
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
usb_control_msg returns in case of a successfully sent message the number
of sent bytes as a positive number. Don't use this value as a return value
for stk_camera_read_reg, as a non-zero return value is used as an error
condition in some cases when stk_camera_read_reg is called.
Signed-off-by: Andreas Pape <ap@ca-pape.de>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The ASUS A6VM notebook has a built in stk11xx webcam which is mounted
in a way that the video is vertically and horizontally flipped.
Therefore this notebook is added to the special handling in the driver
to automatically flip the video into the correct orientation.
Signed-off-by: Andreas Pape <ap@ca-pape.de>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Merge from Upstream after the latest media fixes branch, because we
need one patch that it is there.
* commit '0072a0c14d5b7cb72c611d396f143f5dcd73ebe2': (1108 commits)
ide: Change to use DEFINE_SHOW_ATTRIBUTE macro
ide: pmac: add of_node_put()
drivers/tty: add missing of_node_put()
drivers/sbus/char: add of_node_put()
sbus: char: add of_node_put()
Linux 4.20-rc5
PCI: Fix incorrect value returned from pcie_get_speed_cap()
MAINTAINERS: Update linux-mips mailing list address
ocfs2: fix potential use after free
mm/khugepaged: fix the xas_create_range() error path
mm/khugepaged: collapse_shmem() do not crash on Compound
mm/khugepaged: collapse_shmem() without freezing new_page
mm/khugepaged: minor reorderings in collapse_shmem()
mm/khugepaged: collapse_shmem() remember to clear holes
mm/khugepaged: fix crashes due to misaccounted holes
mm/khugepaged: collapse_shmem() stop if punched or truncated
mm/huge_memory: fix lockdep complaint on 32-bit i_size_read()
mm/huge_memory: splitting set mapping+index before unfreeze
mm/huge_memory: rename freeze_page() to unmap_page()
initramfs: clean old path before creating a hardlink
...
friio drivers is unused and un-compilable since
commit b30cc07de8 ("media: dvb-usb/friio, dvb-usb-v2/gl861: decompose
friio and merge with gl861"). Let's remove it.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Cc: Akihiro Tsukada <tskd2@yahoo.co.jp>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Use dvb-usb-v2 generic usb function for bulk transfers and simplify logic.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
lme2510_state exists for the entire duration of driver.
Move usb_buffer to lme2510_state removing the need for
lme2510_exit_int for removing the buffer.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Since 2018 some new revisions of RTL2832P based devices having
Sony CXD2837ER as a slave demodulator instead of Panasonic MN88473.
CXD2837ER handled in DVB_CXD2841ER module but it's has a lack of control.
So slave demod has to be reseted by GPIO0 before detecting to woke up
CXD2837ER.
Signed-off-by: Nikita Gerasimov <nikitych@yandex.ru>
Cc: Antti Palosaari <crope@iki.fi>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
A new iterator is available for processing UVC URB structures. This
simplifies the processing of the internal stream data.
Convert the manual loop iterators to the new helper, adding an index
helper to keep the existing debug print.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
We have both uvc_init_video() and uvc_video_init() calls which can be
quite confusing to determine the process for each. Now that video
uvc_video_enable() has been renamed to uvc_video_start_streaming(),
adapt these calls to suit the new flow.
Rename uvc_init_video() to uvc_video_start_transfer() and
uvc_uninit_video() to uvc_video_stop_transfer().
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
uvc_video_enable() is used both to start and stop the video stream
object, however the single function entry point shares no code between
the two operations.
Split the function into two distinct calls, and rename to
uvc_video_start_streaming() and uvc_video_stop_streaming() as
appropriate.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Newer high definition cameras, and cameras with multiple lenses such as
the range of stereo-vision cameras now available have ever increasing
data rates.
The inclusion of a variable length packet header in URB packets mean
that we must memcpy the frame data out to our destination 'manually'.
This can result in data rates of up to 2 gigabits per second being
processed.
To improve efficiency, and maximise throughput, handle the URB decode
processing through a work queue to move it from interrupt context, and
allow multiple processors to work on URBs in parallel.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The streaming object is a key part of handling the UVC device. Although
not critical, we are currently missing a call to destroy the mutex on
clean up paths, and we are due to extend the objects complexity in the
near future.
Facilitate easy management of a stream object by creating a pair of
functions to handle creating and destroying the allocation. The new
uvc_stream_delete() function also performs the missing mutex_destroy()
operation.
Previously a failed streaming object allocation would cause
uvc_parse_streaming() to return -EINVAL, which is inappropriate. If the
constructor failes, we will instead return -ENOMEM.
While we're here, fix the trivial spelling error in the function banner
of uvc_delete().
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The buffer queue interface currently operates sequentially, processing
buffers after they have fully completed.
In preparation for supporting parallel tasks operating on the buffers,
we will need to support buffers being processed on multiple CPUs.
Adapt the uvc_queue_next_buffer() such that a reference count tracks the
active use of the buffer, returning the buffer to the VB2 stack at
completion.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Both uvc_start_streaming(), and uvc_stop_streaming() are called from
userspace context, with interrupts enabled. As such, they do not need to
save the IRQ state, and can use spin_lock_irq() and spin_unlock_irq()
respectively.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The URB completion operation obtains the current buffer by reading
directly into the queue internal interface.
Protect this queue abstraction by providing a helper
uvc_queue_get_current_buffer() which can be used by both the decode
task, and the uvc_queue_next_buffer() functions.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The URB completion handlers currently reference the stream context.
Now that each URB has its own context structure, convert the decode (and
one encode) functions to utilise this context for URB management.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
We currently store three separate arrays for each URB reference we hold.
Objectify the data needed to track URBs into a single uvc_urb structure,
allowing better object management and tracking of the URB.
All accesses to the data pointers through stream, are converted to use a
uvc_urb pointer for consistency.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Fix name of the Hybrid T USB XS em28xx card, should be Cinergy.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Currently, disconnecting a USB webcam while it is in use prints out a
number of warnings, such as:
WARNING: CPU: 2 PID: 3118 at /build/linux-ezBi1T/linux-4.8.0/fs/sysfs/group.c:237 sysfs_remove_group+0x8b/0x90
sysfs group ffffffffa7cd0780 not found for kobject 'event13'
This has been noticed before. [0]
This is because of the order in which things are torn down.
If there are no streams active during a USB disconnect:
- uvc_disconnect() is invoked via device_del() through the bus
notifier mechanism.
- this calls uvc_unregister_video().
- uvc_unregister_video() unregisters the video device for each
stream,
- because there are no streams open, it calls uvc_delete()
- uvc_delete() calls uvc_status_cleanup(), which cleans up the status
input device.
- uvc_delete() calls media_device_unregister(), which cleans up the
media device
- uvc_delete(), uvc_unregister_video() and uvc_disconnect() all
return, and we end up back in device_del().
- device_del() then cleans up the sysfs folder for the camera with
dpm_sysfs_remove(). Because uvc_status_cleanup() and
media_device_unregister() have already been called, this all works
nicely.
If, on the other hand, there *are* streams active during a USB disconnect:
- uvc_disconnect() is invoked
- this calls uvc_unregister_video()
- uvc_unregister_video() unregisters the video device for each
stream,
- uvc_unregister_video() and uvc_disconnect() return, and we end up
back in device_del().
- device_del() then cleans up the sysfs folder for the camera with
dpm_sysfs_remove(). Because the status input device and the media
device are children of the USB device, this also deletes their
sysfs folders.
- Sometime later, the final stream is closed, invoking uvc_release().
- uvc_release() calls uvc_delete()
- uvc_delete() calls uvc_status_cleanup(), which cleans up the status
input device. Because the sysfs directory has already been removed,
this causes a WARNing.
- uvc_delete() calls media_device_unregister(), which cleans up the
media device. Because the sysfs directory has already been removed,
this causes another WARNing.
To fix this, we need to make sure the devices are always unregistered
before the end of uvc_disconnect(). To this, move the unregistration
into the disconnect path:
- split uvc_status_cleanup() into two parts, one on disconnect that
unregisters and one on delete that frees.
- move v4l2_device_unregister() and media_device_unregister() into
the disconnect path.
[0]: https://lkml.org/lkml/2016/12/8/657
[Renamed uvc_input_cleanup() to uvc_input_unregister()]
Signed-off-by: Daniel Axtens <dja@axtens.net>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
kmemdup has implemented the function that kmalloc() + memcpy().
We prefer to kmemdup rather than code opened implementation.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Device should be either COLD or WARM.
This change only make usage of the existing definition.
Signed-off-by: Victor Toso <me@victortoso.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
There is a spelling mistake in the MODULE_PARM_DESC text, fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
commit 1a0c10ed7b ("media: dvb-usb-v2: stop using coherent memory for
URBs") incorrectly adds URB_FREE_BUFFER after every urb transfer.
It cannot use this flag because it reconfigures the URBs accordingly
to suit connected devices. In doing a call to usb_free_urb is made and
invertedly frees the buffers.
The stream buffer should remain constant while driver is up.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
CC: stable@vger.kernel.org # v4.18+
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Return 0 when invalidating the logical address. The cec core produces
a warning for drivers that do this.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reported-by: Torbjorn Jansson <torbjorn.jansson@mbox200.swipnet.se>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
When converting gspca to vb2 I missed that fact that the buffer sizes
were rounded up to the next page size. As a result some gspca drivers
(spca561 being one of them) reported frame overflows.
Modify the code to align the buffer sizes to the next page size, just
as the original code did.
Fixes: 1f5965c4df ("media: gspca: convert to vb2")
Tested-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reported-by: softwarebugs <softwarebugs@protonmail.com>
Cc: <stable@vger.kernel.org> # for v4.18 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Now vidioc_cropcap is only used to return the pixelaspect, so
rename it accordingly.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
If g_selection is implemented, then the v4l2-ioctl cropcap code assumes
that cropcap just implements the pixelaspect part and that g_selection
provides the crop bounds and default rectangles.
There are still some drivers that only implement cropcap and not
g_selection. Split up cropcap into a cropcap and g_selection for those
drivers.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-----BEGIN PGP SIGNATURE-----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=V4X4
-----END PGP SIGNATURE-----
Merge tag 'media/v4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull new experimental media request API from Mauro Carvalho Chehab:
"A new media request API
This API is needed to support device drivers that can dynamically
change their parameters for each new frame. The latest versions of
Google camera and codec HAL depends on such feature.
At this stage, it supports only stateless codecs.
It has been discussed for a long time (at least over the last 3-4
years), and we finally reached to something that seem to work.
This series contain both the API and core changes required to support
it and a new m2m decoder driver (cedrus).
As the current API is still experimental, the only real driver using
it (cedrus) was added at staging[1]. We intend to keep it there for a
while, in order to test the API. Only when we're sure that this API
works for other cases (like encoders), we'll move this driver out of
staging and set the API into a stone.
[1] We added support for the vivid virtual driver (used only for
testing) to it too, as it makes easier to test the API for the ones
that don't have the cedrus hardware"
* tag 'media/v4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (53 commits)
media: dt-bindings: Document the Rockchip VPU bindings
media: platform: Add Cedrus VPU decoder driver
media: dt-bindings: media: Document bindings for the Cedrus VPU driver
media: v4l: Add definition for the Sunxi tiled NV12 format
media: v4l: Add definitions for MPEG-2 slice format and metadata
media: videobuf2-core: Rework and rename helper for request buffer count
media: v4l2-ctrls.c: initialize an error return code with zero
media: v4l2-compat-ioctl32.c: add missing documentation for a field
media: media-request: update documentation
media: media-request: EPERM -> EACCES/EBUSY
media: v4l2-ctrls: improve media_request_(un)lock_for_update
media: v4l2-ctrls: use media_request_(un)lock_for_access
media: media-request: add media_request_(un)lock_for_access
media: vb2: set reqbufs/create_bufs capabilities
media: videodev2.h: add new capabilities for buffer types
media: buffer.rst: only set V4L2_BUF_FLAG_REQUEST_FD for QBUF
media: v4l2-ctrls: return -EACCES if request wasn't completed
media: media-request: return -EINVAL for invalid request_fds
media: vivid: add request support
media: vivid: add mc
...
-----BEGIN PGP SIGNATURE-----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=Cc6D
-----END PGP SIGNATURE-----
Merge tag 'media/v4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- new dvb frontend driver: lnbh29
- new sensor drivers: imx319 and imx 355
- some old soc_camera driver renames to avoid conflict with new
drivers
- new i.MX Pixel Pipeline (PXP) mem-to-mem platform driver
- a new V4L2 frontend for the FWHT codec
- several other improvements, bug fixes, code cleanups, etc
* tag 'media/v4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (289 commits)
media: rename soc_camera I2C drivers
media: cec: forgot to cancel delayed work
media: vivid: Support 480p for webcam capture
media: v4l2-tpg: fix kernel oops when enabling HFLIP and OSD
media: vivid: Add 16-bit bayer to format list
media: v4l2-tpg-core: Add 16-bit bayer
media: pvrusb2: replace `printk` with `pr_*`
media: venus: vdec: fix decoded data size
media: cx231xx: fix potential sign-extension overflow on large shift
media: dt-bindings: media: rcar_vin: add device tree support for r8a7744
media: isif: fix a NULL pointer dereference bug
media: exynos4-is: make const array config_ids static
media: cx23885: make const array addr_list static
media: ivtv: make const array addr_list static
media: bttv-input: make const array addr_list static
media: cx18: Don't check for address of video_dev
media: dw9807-vcm: Fix probe error handling
media: dw9714: Remove useless error message
media: dw9714: Fix error handling in probe function
media: cec: name for RC passthrough device does not need 'RC for'
...
