Commit Graph

44 Commits

Author SHA1 Message Date
Jens Axboe
b0a84beb2e blk-wbt: remove dead code
We already note and mark discard and swap IO from bio_to_wbt_flags().

Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-08-27 13:32:12 -06:00
Jens Axboe
38cfb5a45e blk-wbt: improve waking of tasks
We have two potential issues:

1) After commit 2887e41b91, we only wake one process at the time when
   we finish an IO. We really want to wake up as many tasks as can
   queue IO. Before this commit, we woke up everyone, which could cause
   a thundering herd issue.

2) A task can potentially consume two wakeups, causing us to (in
   practice) miss a wakeup.

Fix both by providing our own wakeup function, which stops
__wake_up_common() from waking up more tasks if we fail to get a
queueing token. With the strict ordering we have on the wait list, this
wakes the right tasks and the right amount of tasks.

Based on a patch from Jianchao Wang <jianchao.w.wang@oracle.com>.

Tested-by: Agarwal, Anchal <anchalag@amazon.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-08-27 11:27:26 -06:00
Jens Axboe
061a542753 blk-wbt: abstract out end IO completion handler
Prep patch for calling the handler from a different context,
no functional changes in this patch.

Tested-by: Agarwal, Anchal <anchalag@amazon.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-08-27 11:27:24 -06:00
Jens Axboe
c125311d96 blk-wbt: don't maintain inflight counts if disabled
A previous commit removed the ability to have per-rq flags. We used
those flags to maintain inflight counts. Since we don't have those
anymore, we have to always maintain inflight counts, even if wbt is
disabled. This is clearly suboptimal.

Add a queue quiesce around changing the wbt latency settings from sysfs
to work around this. With that, we can reliably put the enabled check in
our bio_to_wbt_flags(), since we know the WBT_TRACKED flag will be
consistent for the lifetime of the request.

Fixes: c1c80384c8 ("block: remove external dependency on wbt_flags")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-08-23 09:34:46 -06:00
Jens Axboe
c45e6a037a blk-wbt: fix has-sleeper queueing check
We need to do this inside the loop as well, or we can allow new
IO to supersede previous IO.

Tested-by: Anchal Agarwal <anchalag@amazon.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-08-22 15:07:32 -06:00
Jens Axboe
b78820937b blk-wbt: use wq_has_sleeper() for wq active check
We need the memory barrier before checking the list head,
use the appropriate helper for this. The matching queue
side memory barrier is provided by set_current_state().

Tested-by: Anchal Agarwal <anchalag@amazon.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-08-22 15:07:31 -06:00
Jens Axboe
ffa358dcaa blk-wbt: move disable check into get_limit()
Check it in one place, instead of in multiple places.

Tested-by: Anchal Agarwal <anchalag@amazon.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-08-22 15:07:31 -06:00
Ming Lei
df60f6e835 blk-wbt: fix IO hang in wbt_wait()
On wbt invariant is that if one IO is tracked via WBT_TRACKED, rqw->inflight
should be updated for tracking this IO.

But commit c1c80384c8 ("block: remove external dependency on wbt_flags")
forgets to remove the early handling of !rwb_enabled(rwb) inside wbt_wait(),
then the inflight counter may not be increased in wbt_wait(), but decreased
in wbt_done() for this kind of IO, so this counter may become negative, then
wbt_wait() may wait forever.

This patch fixes the report in the following link:

	https://marc.info/?l=linux-block&m=153221542021033&w=2

Fixes: c1c80384c8 ("block: remove external dependency on wbt_flags")
Cc: Josef Bacik <jbacik@fb.com>
Reported-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-08-14 11:05:52 -06:00
Anchal Agarwal
2887e41b91 blk-wbt: Avoid lock contention and thundering herd issue in wbt_wait
I am currently running a large bare metal instance (i3.metal)
on EC2 with 72 cores, 512GB of RAM and NVME drives, with a
4.18 kernel. I have a workload that simulates a database
workload and I am running into lockup issues when writeback
throttling is enabled,with the hung task detector also
kicking in.

Crash dumps show that most CPUs (up to 50 of them) are
all trying to get the wbt wait queue lock while trying to add
themselves to it in __wbt_wait (see stack traces below).

[    0.948118] CPU: 45 PID: 0 Comm: swapper/45 Not tainted 4.14.51-62.38.amzn1.x86_64 #1
[    0.948119] Hardware name: Amazon EC2 i3.metal/Not Specified, BIOS 1.0 10/16/2017
[    0.948120] task: ffff883f7878c000 task.stack: ffffc9000c69c000
[    0.948124] RIP: 0010:native_queued_spin_lock_slowpath+0xf8/0x1a0
[    0.948125] RSP: 0018:ffff883f7fcc3dc8 EFLAGS: 00000046
[    0.948126] RAX: 0000000000000000 RBX: ffff887f7709ca68 RCX: ffff883f7fce2a00
[    0.948128] RDX: 000000000000001c RSI: 0000000000740001 RDI: ffff887f7709ca68
[    0.948129] RBP: 0000000000000002 R08: 0000000000b80000 R09: 0000000000000000
[    0.948130] R10: ffff883f7fcc3d78 R11: 000000000de27121 R12: 0000000000000002
[    0.948131] R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000000
[    0.948132] FS:  0000000000000000(0000) GS:ffff883f7fcc0000(0000) knlGS:0000000000000000
[    0.948134] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    0.948135] CR2: 000000c424c77000 CR3: 0000000002010005 CR4: 00000000003606e0
[    0.948136] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    0.948137] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    0.948138] Call Trace:
[    0.948139]  <IRQ>
[    0.948142]  do_raw_spin_lock+0xad/0xc0
[    0.948145]  _raw_spin_lock_irqsave+0x44/0x4b
[    0.948149]  ? __wake_up_common_lock+0x53/0x90
[    0.948150]  __wake_up_common_lock+0x53/0x90
[    0.948155]  wbt_done+0x7b/0xa0
[    0.948158]  blk_mq_free_request+0xb7/0x110
[    0.948161]  __blk_mq_complete_request+0xcb/0x140
[    0.948166]  nvme_process_cq+0xce/0x1a0 [nvme]
[    0.948169]  nvme_irq+0x23/0x50 [nvme]
[    0.948173]  __handle_irq_event_percpu+0x46/0x300
[    0.948176]  handle_irq_event_percpu+0x20/0x50
[    0.948179]  handle_irq_event+0x34/0x60
[    0.948181]  handle_edge_irq+0x77/0x190
[    0.948185]  handle_irq+0xaf/0x120
[    0.948188]  do_IRQ+0x53/0x110
[    0.948191]  common_interrupt+0x87/0x87
[    0.948192]  </IRQ>
....
[    0.311136] CPU: 4 PID: 9737 Comm: run_linux_amd64 Not tainted 4.14.51-62.38.amzn1.x86_64 #1
[    0.311137] Hardware name: Amazon EC2 i3.metal/Not Specified, BIOS 1.0 10/16/2017
[    0.311138] task: ffff883f6e6a8000 task.stack: ffffc9000f1ec000
[    0.311141] RIP: 0010:native_queued_spin_lock_slowpath+0xf5/0x1a0
[    0.311142] RSP: 0018:ffffc9000f1efa28 EFLAGS: 00000046
[    0.311144] RAX: 0000000000000000 RBX: ffff887f7709ca68 RCX: ffff883f7f722a00
[    0.311145] RDX: 0000000000000035 RSI: 0000000000d80001 RDI: ffff887f7709ca68
[    0.311146] RBP: 0000000000000202 R08: 0000000000140000 R09: 0000000000000000
[    0.311147] R10: ffffc9000f1ef9d8 R11: 000000001a249fa0 R12: ffff887f7709ca68
[    0.311148] R13: ffffc9000f1efad0 R14: 0000000000000000 R15: ffff887f7709ca00
[    0.311149] FS:  000000c423f30090(0000) GS:ffff883f7f700000(0000) knlGS:0000000000000000
[    0.311150] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    0.311151] CR2: 00007feefcea4000 CR3: 0000007f7016e001 CR4: 00000000003606e0
[    0.311152] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    0.311153] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    0.311154] Call Trace:
[    0.311157]  do_raw_spin_lock+0xad/0xc0
[    0.311160]  _raw_spin_lock_irqsave+0x44/0x4b
[    0.311162]  ? prepare_to_wait_exclusive+0x28/0xb0
[    0.311164]  prepare_to_wait_exclusive+0x28/0xb0
[    0.311167]  wbt_wait+0x127/0x330
[    0.311169]  ? finish_wait+0x80/0x80
[    0.311172]  ? generic_make_request+0xda/0x3b0
[    0.311174]  blk_mq_make_request+0xd6/0x7b0
[    0.311176]  ? blk_queue_enter+0x24/0x260
[    0.311178]  ? generic_make_request+0xda/0x3b0
[    0.311181]  generic_make_request+0x10c/0x3b0
[    0.311183]  ? submit_bio+0x5c/0x110
[    0.311185]  submit_bio+0x5c/0x110
[    0.311197]  ? __ext4_journal_stop+0x36/0xa0 [ext4]
[    0.311210]  ext4_io_submit+0x48/0x60 [ext4]
[    0.311222]  ext4_writepages+0x810/0x11f0 [ext4]
[    0.311229]  ? do_writepages+0x3c/0xd0
[    0.311239]  ? ext4_mark_inode_dirty+0x260/0x260 [ext4]
[    0.311240]  do_writepages+0x3c/0xd0
[    0.311243]  ? _raw_spin_unlock+0x24/0x30
[    0.311245]  ? wbc_attach_and_unlock_inode+0x165/0x280
[    0.311248]  ? __filemap_fdatawrite_range+0xa3/0xe0
[    0.311250]  __filemap_fdatawrite_range+0xa3/0xe0
[    0.311253]  file_write_and_wait_range+0x34/0x90
[    0.311264]  ext4_sync_file+0x151/0x500 [ext4]
[    0.311267]  do_fsync+0x38/0x60
[    0.311270]  SyS_fsync+0xc/0x10
[    0.311272]  do_syscall_64+0x6f/0x170
[    0.311274]  entry_SYSCALL_64_after_hwframe+0x42/0xb7

In the original patch, wbt_done is waking up all the exclusive
processes in the wait queue, which can cause a thundering herd
if there is a large number of writer threads in the queue. The
original intention of the code seems to be to wake up one thread
only however, it uses wake_up_all() in __wbt_done(), and then
uses the following check in __wbt_wait to have only one thread
actually get out of the wait loop:

if (waitqueue_active(&rqw->wait) &&
            rqw->wait.head.next != &wait->entry)
                return false;

The problem with this is that the wait entry in wbt_wait is
define with DEFINE_WAIT, which uses the autoremove wakeup function.
That means that the above check is invalid - the wait entry will
have been removed from the queue already by the time we hit the
check in the loop.

Secondly, auto-removing the wait entries also means that the wait
queue essentially gets reordered "randomly" (e.g. threads re-add
themselves in the order they got to run after being woken up).
Additionally, new requests entering wbt_wait might overtake requests
that were queued earlier, because the wait queue will be
(temporarily) empty after the wake_up_all, so the waitqueue_active
check will not stop them. This can cause certain threads to starve
under high load.

The fix is to leave the woken up requests in the queue and remove
them in finish_wait() once the current thread breaks out of the
wait loop in __wbt_wait. This will ensure new requests always
end up at the back of the queue, and they won't overtake requests
that are already in the wait queue. With that change, the loop
in wbt_wait is also in line with many other wait loops in the kernel.
Waking up just one thread drastically reduces lock contention, as
does moving the wait queue add/remove out of the loop.

A significant drop in lockdep's lock contention numbers is seen when
running the test application on the patched kernel.

Signed-off-by: Anchal Agarwal <anchalag@amazon.com>
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-08-07 14:40:49 -06:00
Josef Bacik
c1c80384c8 block: remove external dependency on wbt_flags
We don't really need to save this stuff in the core block code, we can
just pass the bio back into the helpers later on to derive the same
flags and update the rq->wbt_flags appropriately.

Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-09 09:07:54 -06:00
Josef Bacik
a79050434b blk-rq-qos: refactor out common elements of blk-wbt
blkcg-qos is going to do essentially what wbt does, only on a cgroup
basis.  Break out the common code that will be shared between blkcg-qos
and wbt into blk-rq-qos.* so they can both utilize the same
infrastructure.

Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-09 09:07:54 -06:00
Omar Sandoval
544ccc8dc9 block: get rid of struct blk_issue_stat
struct blk_issue_stat squashes three things into one u64:

- The time the driver started working on a request
- The original size of the request (for the io.low controller)
- Flags for writeback throttling

It turns out that on x86_64, we have a 4 byte hole in struct request
which we can fill with the non-timestamp fields from blk_issue_stat,
simplifying things quite a bit.

Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-09 08:33:05 -06:00
Omar Sandoval
a8a4594170 block: pass struct request instead of struct blk_issue_stat to wbt
issue_stat is going to go away, so first make writeback throttling take
the containing request, update the internal wbt helpers accordingly, and
change rwb->sync_cookie to be the request pointer instead of the
issue_stat pointer. No functional change.

Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-09 08:33:02 -06:00
Omar Sandoval
934031a129 block: move some wbt helpers to blk-wbt.c
A few helpers are only used from blk-wbt.c, so move them there, and put
wbt_track() behind the CONFIG_BLK_WBT typedef. This is in preparation
for changing how the wbt flags are tracked.

Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-09 08:33:00 -06:00
Jens Axboe
782f569774 blk-wbt: throttle discards like background writes
Throttle discards like we would any background write. Discards should
be background activity, so if they are impacting foreground IO, then
we will throttle them down.

Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-08 15:11:02 -06:00
Jens Axboe
8bea609019 blk-wbt: pass in enum wbt_flags to get_rq_wait()
This is in preparation for having more write queues, in which
case we would have needed to pass in more information than just
a simple 'is_kswapd' boolean.

Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-08 15:10:56 -06:00
Jens Axboe
825843b0ad blk-wbt: account any writing command as a write
We currently special case WRITE and FLUSH, but we should really
just include any command with the write bit set. This ensures
that we account DISCARD.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-08 15:10:49 -06:00
Jens Axboe
5235553d82 blk-wbt: account flush requests correctly
Mikulas reported a workload that saw bad performance, and figured
out what it was due to various other types of requests being
accounted as reads. Flush requests, for instance. Due to the
high latency of those, we heavily throttle the writes to keep
the latencies in balance. But they really should be accounted
as writes.

Fix this by checking the exact type of the request. If it's a
read, account as a read, if it's a write or a flush, account
as a write. Any other request we disregard. Previously everything
would have been mistakenly accounted as reads.

Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-02-06 14:14:03 -07:00
weiping zhang
3dfbdc44d6 blk-wbt: fix comments typo
Signed-off-by: weiping zhang <zhangweiping@didichuxing.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-23 22:00:20 -07:00
weiping zhang
62d772fa9d blk-wbt: move wbt_clear_stat to common place in wbt_done
wbt_done call wbt_clear_stat no matter current stat was tracked
or not, move it to common place.

Signed-off-by: weiping zhang <zhangweiping@didichuxing.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-23 22:00:18 -07:00
weiping zhang
612ea091fc blk-wbt: remove duplicated setting in wbt_init
rwb->wc and rwb->queue_depth were overwritten by wbt_set_write_cache and
wbt_set_queue_depth, remove the default setting.

Signed-off-by: weiping zhang <zhangweiping@didichuxing.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-23 22:00:15 -07:00
Linus Torvalds
e2c5923c34 Merge branch 'for-4.15/block' of git://git.kernel.dk/linux-block
Pull core block layer updates from Jens Axboe:
 "This is the main pull request for block storage for 4.15-rc1.

  Nothing out of the ordinary in here, and no API changes or anything
  like that. Just various new features for drivers, core changes, etc.
  In particular, this pull request contains:

   - A patch series from Bart, closing the whole on blk/scsi-mq queue
     quescing.

   - A series from Christoph, building towards hidden gendisks (for
     multipath) and ability to move bio chains around.

   - NVMe
        - Support for native multipath for NVMe (Christoph).
        - Userspace notifications for AENs (Keith).
        - Command side-effects support (Keith).
        - SGL support (Chaitanya Kulkarni)
        - FC fixes and improvements (James Smart)
        - Lots of fixes and tweaks (Various)

   - bcache
        - New maintainer (Michael Lyle)
        - Writeback control improvements (Michael)
        - Various fixes (Coly, Elena, Eric, Liang, et al)

   - lightnvm updates, mostly centered around the pblk interface
     (Javier, Hans, and Rakesh).

   - Removal of unused bio/bvec kmap atomic interfaces (me, Christoph)

   - Writeback series that fix the much discussed hundreds of millions
     of sync-all units. This goes all the way, as discussed previously
     (me).

   - Fix for missing wakeup on writeback timer adjustments (Yafang
     Shao).

   - Fix laptop mode on blk-mq (me).

   - {mq,name} tupple lookup for IO schedulers, allowing us to have
     alias names. This means you can use 'deadline' on both !mq and on
     mq (where it's called mq-deadline). (me).

   - blktrace race fix, oopsing on sg load (me).

   - blk-mq optimizations (me).

   - Obscure waitqueue race fix for kyber (Omar).

   - NBD fixes (Josef).

   - Disable writeback throttling by default on bfq, like we do on cfq
     (Luca Miccio).

   - Series from Ming that enable us to treat flush requests on blk-mq
     like any other request. This is a really nice cleanup.

   - Series from Ming that improves merging on blk-mq with schedulers,
     getting us closer to flipping the switch on scsi-mq again.

   - BFQ updates (Paolo).

   - blk-mq atomic flags memory ordering fixes (Peter Z).

   - Loop cgroup support (Shaohua).

   - Lots of minor fixes from lots of different folks, both for core and
     driver code"

* 'for-4.15/block' of git://git.kernel.dk/linux-block: (294 commits)
  nvme: fix visibility of "uuid" ns attribute
  blk-mq: fixup some comment typos and lengths
  ide: ide-atapi: fix compile error with defining macro DEBUG
  blk-mq: improve tag waiting setup for non-shared tags
  brd: remove unused brd_mutex
  blk-mq: only run the hardware queue if IO is pending
  block: avoid null pointer dereference on null disk
  fs: guard_bio_eod() needs to consider partitions
  xtensa/simdisk: fix compile error
  nvme: expose subsys attribute to sysfs
  nvme: create 'slaves' and 'holders' entries for hidden controllers
  block: create 'slaves' and 'holders' entries for hidden gendisks
  nvme: also expose the namespace identification sysfs files for mpath nodes
  nvme: implement multipath access to nvme subsystems
  nvme: track shared namespaces
  nvme: introduce a nvme_ns_ids structure
  nvme: track subsystems
  block, nvme: Introduce blk_mq_req_flags_t
  block, scsi: Make SCSI quiesce and resume work reliably
  block: Add the QUEUE_FLAG_PREEMPT_ONLY request queue flag
  ...
2017-11-14 15:32:19 -08:00
Mark Rutland
6aa7de0591 locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns to READ_ONCE()/WRITE_ONCE()
Please do not apply this to mainline directly, instead please re-run the
coccinelle script shown below and apply its output.

For several reasons, it is desirable to use {READ,WRITE}_ONCE() in
preference to ACCESS_ONCE(), and new code is expected to use one of the
former. So far, there's been no reason to change most existing uses of
ACCESS_ONCE(), as these aren't harmful, and changing them results in
churn.

However, for some features, the read/write distinction is critical to
correct operation. To distinguish these cases, separate read/write
accessors must be used. This patch migrates (most) remaining
ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following
coccinelle script:

----
// Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and
// WRITE_ONCE()

// $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch

virtual patch

@ depends on patch @
expression E1, E2;
@@

- ACCESS_ONCE(E1) = E2
+ WRITE_ONCE(E1, E2)

@ depends on patch @
expression E;
@@

- ACCESS_ONCE(E)
+ READ_ONCE(E)
----

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: davem@davemloft.net
Cc: linux-arch@vger.kernel.org
Cc: mpe@ellerman.id.au
Cc: shuah@kernel.org
Cc: snitzer@redhat.com
Cc: thor.thayer@linux.intel.com
Cc: tj@kernel.org
Cc: viro@zeniv.linux.org.uk
Cc: will.deacon@arm.com
Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-25 11:01:08 +02:00
Luca Miccio
b5dc5d4d1f block,bfq: Disable writeback throttling
Similarly to CFQ, BFQ has its write-throttling heuristics, and it
is better not to combine them with further write-throttling
heuristics of a different nature.
So this commit disables write-back throttling for a device if BFQ
is used as I/O scheduler for that device.

Signed-off-by: Luca Miccio <lucmiccio@gmail.com>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Lee Tibbert <lee.tibbert@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-09 08:29:21 -06:00
Ingo Molnar
2055da9738 sched/wait: Disambiguate wq_entry->task_list and wq_head->task_list naming
So I've noticed a number of instances where it was not obvious from the
code whether ->task_list was for a wait-queue head or a wait-queue entry.

Furthermore, there's a number of wait-queue users where the lists are
not for 'tasks' but other entities (poll tables, etc.), in which case
the 'task_list' name is actively confusing.

To clear this all up, name the wait-queue head and entry list structure
fields unambiguously:

	struct wait_queue_head::task_list	=> ::head
	struct wait_queue_entry::task_list	=> ::entry

For example, this code:

	rqw->wait.task_list.next != &wait->task_list

... is was pretty unclear (to me) what it's doing, while now it's written this way:

	rqw->wait.head.next != &wait->entry

... which makes it pretty clear that we are iterating a list until we see the head.

Other examples are:

	list_for_each_entry_safe(pos, next, &x->task_list, task_list) {
	list_for_each_entry(wq, &fence->wait.task_list, task_list) {

... where it's unclear (to me) what we are iterating, and during review it's
hard to tell whether it's trying to walk a wait-queue entry (which would be
a bug), while now it's written as:

	list_for_each_entry_safe(pos, next, &x->head, entry) {
	list_for_each_entry(wq, &fence->wait.head, entry) {

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-20 12:19:14 +02:00
Ingo Molnar
ac6424b981 sched/wait: Rename wait_queue_t => wait_queue_entry_t
Rename:

	wait_queue_t		=>	wait_queue_entry_t

'wait_queue_t' was always a slight misnomer: its name implies that it's a "queue",
but in reality it's a queue *entry*. The 'real' queue is the wait queue head,
which had to carry the name.

Start sorting this out by renaming it to 'wait_queue_entry_t'.

This also allows the real structure name 'struct __wait_queue' to
lose its double underscore and become 'struct wait_queue_entry',
which is the more canonical nomenclature for such data types.

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-20 12:18:27 +02:00
Jens Axboe
99c749a4c4 blk-stat: kill blk_stat_rq_ddir()
No point in providing and exporting this helper. There's just
one (real) user of it, just use rq_data_dir().

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-21 07:56:23 -06:00
Jan Kara
8330cdb0fe block: Make writeback throttling defaults consistent for SQ devices
When CFQ is used as an elevator, it disables writeback throttling
because they don't play well together. Later when a different elevator
is chosen for the device, writeback throttling doesn't get enabled
again as it should. Make sure CFQ enables writeback throttling (if it
should be enabled by default) when we switch from it to another IO
scheduler.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-19 08:49:03 -06:00
Jan Kara
3f19cd23f3 block: Fix list corruption of blk stats callback list
When CFQ calls wbt_disable_default(), it will call
blk_stat_remove_callback() to stop gathering IO statistics for the
purposes of writeback throttling. Later, when request_queue is
unregistered, wbt_exit() will call blk_stat_remove_callback() again
which will try to delete callback from the list again and possibly cause
list corruption.

Fix the problem by making wbt_disable_default() called wbt_exit() which
is properly guarded against being called multiple times.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-11 08:09:14 -06:00
Omar Sandoval
34dbad5d26 blk-stat: convert to callback-based statistics reporting
Currently, statistics are gathered in ~0.13s windows, and users grab the
statistics whenever they need them. This is not ideal for both in-tree
users:

1. Writeback throttling wants its own dynamically sized window of
   statistics. Since the blk-stats statistics are reset after every
   window and the wbt windows don't line up with the blk-stats windows,
   wbt doesn't see every I/O.
2. Polling currently grabs the statistics on every I/O. Again, depending
   on how the window lines up, we may miss some I/Os. It's also
   unnecessary overhead to get the statistics on every I/O; the hybrid
   polling heuristic would be just as happy with the statistics from the
   previous full window.

This reworks the blk-stats infrastructure to be callback-based: users
register a callback that they want called at a given time with all of
the statistics from the window during which the callback was active.
Users can dynamically bucketize the statistics. wbt and polling both
currently use read vs. write, but polling can be extended to further
subdivide based on request size.

The callbacks are kept on an RCU list, and each callback has percpu
stats buffers. There will only be a few users, so the overhead on the
I/O completion side is low. The stats flushing is also simplified
considerably: since the timer function is responsible for clearing the
statistics, we don't have to worry about stale statistics.

wbt is a trivial conversion. After the conversion, the windowing problem
mentioned above is fixed.

For polling, we register an extra callback that caches the previous
window's statistics in the struct request_queue for the hybrid polling
heuristic to use.

Since we no longer have a single stats buffer for the request queue,
this also removes the sysfs and debugfs stats entries. To replace those,
we add a debugfs entry for the poll statistics.

Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-21 10:03:11 -06:00
Omar Sandoval
fa2e39cb9e blk-stat: use READ and WRITE instead of BLK_STAT_{READ,WRITE}
The stats buckets will become generic soon, so make the existing users
use the common READ and WRITE definitions instead of one internal to
blk-stat.

Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-21 10:03:08 -06:00
Jan Kara
dc3b17cc8b block: Use pointer to backing_dev_info from request_queue
We will want to have struct backing_dev_info allocated separately from
struct request_queue. As the first step add pointer to backing_dev_info
to request_queue and convert all users touching it. No functional
changes in this patch.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-02 08:20:48 -07:00
Bart Van Assche
9eca53508a block: Avoid that sparse complains about context imbalance in __wbt_wait()
This patch does not change any functionality.

Fixes: e34cbd3074 ("blk-wbt: add general throttling mechanism")
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-02 09:48:47 -07:00
Bart Van Assche
f2e0a0b292 block: Make wbt_wait() definition consistent with declaration
Fixes: e34cbd3074 ("blk-wbt: add general throttling mechanism")
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-02 09:46:15 -07:00
Christoph Hellwig
be07e14f96 blk-wbt: don't throttle discard or write zeroes
Both of these are metadata only commands that are not issued by the
writeback code and not directly relevant to the writeback bandwith.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-12-09 08:29:35 -07:00
Chaitanya Kulkarni
a6f0788ec2 block: add support for REQ_OP_WRITE_ZEROES
This adds a new block layer operation to zero out a range of
LBAs. This allows to implement zeroing for devices that don't use
either discard with a predictable zero pattern or WRITE SAME of zeroes.
The prominent example of that is NVMe with the Write Zeroes command,
but in the future, this should also help with improving the way
zeroing discards work. For this operation, suitable entry is exported in
sysfs which indicate the number of maximum bytes allowed in one
write zeroes operation by the device.

Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@hgst.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-12-01 07:58:40 -07:00
Jens Axboe
d62118b6dd blk-wbt: allow wbt to be enabled always through sysfs
Currently there's no way to enable wbt if it's not enabled in the
kernel config by default for a device. Allow a write to the
'wbt_lat_usec' queue sysfs file to enable wbt.

This is useful for both the kernel config case, but also if the
device is CFQ managed and it was turned off by default.

Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-28 10:27:03 -07:00
Jens Axboe
fa224eed2b blk-wbt: cleanup disable-by-default for CFQ
Make it clear that we are disabling wbt for the specified queued,
if it was enabled by default. This is in preparation for allowing
users to re-enable wbt, and not have it disabled automatically
again.

Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-28 10:27:03 -07:00
Jens Axboe
80e091d10e blk-wbt: allow reset of default latency through sysfs
Allow a write of '-1' to reset the default latency target for
a given device. This removes knowledge of the different default
settings for rotational vs non-rotational from user space.

Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-28 10:27:03 -07:00
Arnd Bergmann
4121d385f1 blk-wbt: fix old-style function declaration
The newly added driver causes a harmless warning in some configurations:

block/blk-wbt.c:250:1: error: ‘inline’ is not at beginning of declaration [-Werror=old-style-declaration]
 static bool inline stat_sample_valid(struct blk_rq_stat *stat)

This makes it use the expected format for the declaration.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-16 08:32:40 -07:00
Jens Axboe
382cf633ed blk-wbt: use BLK_STAT_{READ,WRITE} instead of 0/1
Since we have proper enums for the stats directions, use them.

Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-11 16:18:29 -07:00
Jens Axboe
8054b89f8f blk-wbt: remove stat ops
Again a leftover from when the throttling code was generic. Now that we
just have the block user, get rid of the stat ops and indirections.

Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-11 16:18:24 -07:00
Jens Axboe
d8a0cbfd73 blk-wbt: store queue instead of bdi
The bdi was a leftover from when the code was block layer agnostic.
Now that we just support a block layer user, store the queue directly.

Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-11 16:18:18 -07:00
Jens Axboe
e34cbd3074 blk-wbt: add general throttling mechanism
We can hook this up to the block layer, to help throttle buffered
writes.

wbt registers a few trace points that can be used to track what is
happening in the system:

wbt_lat: 259:0: latency 2446318
wbt_stat: 259:0: rmean=2446318, rmin=2446318, rmax=2446318, rsamples=1,
               wmean=518866, wmin=15522, wmax=5330353, wsamples=57
wbt_step: 259:0: step down: step=1, window=72727272, background=8, normal=16, max=32

This shows a sync issue event (wbt_lat) that exceeded it's time. wbt_stat
dumps the current read/write stats for that window, and wbt_step shows a
step down event where we now scale back writes. Each trace includes the
device, 259:0 in this case.

Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-10 13:53:32 -07:00