Commit Graph

786 Commits

Author SHA1 Message Date
Ulf Hansson
a6653fb584 cpuidle: riscv-sbi: Fix code to allow a genpd governor to be used
The intent is to use a genpd governor when there are some states that needs
to be managed. Although, the current code ends up to never assign a
governor, let's fix this.

Fixes: 6abf32f1d9 ("cpuidle: Add RISC-V SBI CPU idle driver")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-05-19 19:35:54 +02:00
Ulf Hansson
34be27517c cpuidle: psci: Fix regression leading to no genpd governor
While factoring out the PM domain related code from PSCI domain driver into
a set of library functions, a regression when initializing the genpds got
introduced. More precisely, we fail to assign a genpd governor, so let's
fix this.

Fixes: 9d976d6721 ("cpuidle: Factor-out power domain related code from PSCI domain driver")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-05-19 19:35:54 +02:00
Randy Dunlap
f81f7861ee
cpuidle: riscv: support non-SMP config
Add <asm/smp.h> for cpuid_to_hartid_map etc.
This is needed for both SMP and non-SMP builds, but not having it
causes a build error for non-SMP:

drivers/cpuidle/cpuidle-riscv-sbi.c: In function 'sbi_cpuidle_init_cpu':
drivers/cpuidle/cpuidle-riscv-sbi.c:350:26: error: implicit declaration of function 'cpuid_to_hartid_map' [-Werror=implicit-function-declaration]

Fixes: 6abf32f1d9 ("cpuidle: Add RISC-V SBI CPU idle driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-04-19 17:42:08 -07:00
Ulf Hansson
171b66e2e2 cpuidle: PSCI: Improve support for suspend-to-RAM for PSCI OSI mode
When PSCI OSI mode is supported the syscore flag is set for the CPU devices
that becomes attached to their PM domains (genpds). In the suspend-to-idle
case, we call dev_pm_genpd_suspend|resume() to allow genpd to properly
manage the power-off/on operations (pick an idlestate and manage the on/off
notifications).

For suspend-to-ram, dev_pm_genpd_suspend|resume() is currently not being
called, which causes a problem that the genpd on/off notifiers do not get
sent as expected. This prevents the platform-specific operations from being
executed, typically needed just before/after the boot CPU is being turned
off/on.

To deal with this problem, let's register a syscore ops for cpuidle-psci
when PSCI OSI mode is being used and call dev_pm_genpd_suspend|resume()
from them. In this way, genpd regains control of the PM domain topology and
then sends the on/off notifications when it's appropriate.

Reported-by: Maulik Shah <quic_mkshah@quicinc.com>
Suggested-by: Maulik Shah <quic_mkshah@quicinc.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Maulik Shah <quic_mkshah@quicinc.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-04-19 17:24:34 +02:00
Palmer Dabbelt
bee7fbc385
RISC-V CPU Idle Support
This series adds RISC-V CPU Idle support using SBI HSM suspend function.
The RISC-V SBI CPU idle driver added by this series is highly inspired
from the ARM PSCI CPU idle driver.

Special thanks Sandeep Tripathy for providing early feeback on SBI HSM
support in all above projects (RISC-V SBI specification, OpenSBI, and
Linux RISC-V).

* palmer/riscv-idle:
  RISC-V: Enable RISC-V SBI CPU Idle driver for QEMU virt machine
  dt-bindings: Add common bindings for ARM and RISC-V idle states
  cpuidle: Add RISC-V SBI CPU idle driver
  cpuidle: Factor-out power domain related code from PSCI domain driver
  RISC-V: Add SBI HSM suspend related defines
  RISC-V: Add arch functions for non-retentive suspend entry/exit
  RISC-V: Rename relocate() and make it global
  RISC-V: Enable CPU_IDLE drivers
2022-03-30 16:17:54 -07:00
Linus Torvalds
b4bc93bd76 ARM driver updates for 5.18
There are a few separately maintained driver subsystems that we merge through
 the SoC tree, notable changes are:
 
  - Memory controller updates, mainly for Tegra and Mediatek SoCs,
    and clarifications for the memory controller DT bindings
 
  - SCMI firmware interface updates, in particular a new transport based
    on OPTEE and support for atomic operations.
 
  - Cleanups to the TEE subsystem, refactoring its memory management
 
 For SoC specific drivers without a separate subsystem, changes include
 
  - Smaller updates and fixes for TI, AT91/SAMA5, Qualcomm and NXP
    Layerscape SoCs.
 
  - Driver support for Microchip SAMA5D29, Tesla FSD, Renesas RZ/G2L,
    and Qualcomm SM8450.
 
  - Better power management on Mediatek MT81xx, NXP i.MX8MQ
    and older NVIDIA Tegra chips
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmI4nOUACgkQmmx57+YA
 GNlNNhAApPQw+FKQ6yVj2EZYcaAgik8PJAJoNQWYED52iQfm5uXgjt3aQewvrPNW
 nkKx5Mx+fPUfaKx5mkVOFMhME5Bw9tYbXHm2/RpRp+n8jOdUlQpAhzIPOyWPHOJS
 QX6qu4t+agrQzjbOCGouAJXgyxhTJFUMviM2EgVHbQHXPtdF8i2kyanfCP7Rw8cx
 sVtLwpvhbLm849+deYRXuv2Xw9I3M1Np7018s5QciimI2eLLEb+lJ/C5XWz5pMYn
 M1nZ7uwCLKPCewpMETTuhKOv0ioOXyY9C1ghyiGZFhHQfoCYTu94Hrx9t8x5gQmL
 qWDinXWXVk8LBegyrs8Bp4wcjtmvMMLnfWtsGSfT5uq24JOGg22OmtUNhNJbS9+p
 VjEvBgkXYD7UEl5npI9v9/KQWr3/UDir0zvkuV40gJyeBWNEZ/PB8olXAxgL7wZv
 cXRYSaUYYt3DKQf1k5I4GUyQtkP/4RaBy6AqvH5Sx0lCwuY6G6ISK+kCPaaSRKnX
 WR+nFw84dKCu7miehmW9qSzMQ4kiSCKIDqk7ilHcwv0J2oXDrlqVPKGGGTzZjUc8
 +feqM/eSoYvDDEDemuXNSnl3hc1Zlvm7Apd5AN6kdTaNgoACDYdyvGuJ3CvzcA+K
 1gBHUBvGS/ODA25KnYabr7wCMgxYqf7dXfkyKIBwFHwxOnRHtgs=
 =Cfbk
 -----END PGP SIGNATURE-----

Merge tag 'arm-drivers-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM driver updates from Arnd Bergmann:
 "There are a few separately maintained driver subsystems that we merge
  through the SoC tree, notable changes are:

   - Memory controller updates, mainly for Tegra and Mediatek SoCs, and
     clarifications for the memory controller DT bindings

   - SCMI firmware interface updates, in particular a new transport
     based on OPTEE and support for atomic operations.

   - Cleanups to the TEE subsystem, refactoring its memory management

  For SoC specific drivers without a separate subsystem, changes include

   - Smaller updates and fixes for TI, AT91/SAMA5, Qualcomm and NXP
     Layerscape SoCs.

   - Driver support for Microchip SAMA5D29, Tesla FSD, Renesas RZ/G2L,
     and Qualcomm SM8450.

   - Better power management on Mediatek MT81xx, NXP i.MX8MQ and older
     NVIDIA Tegra chips"

* tag 'arm-drivers-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (154 commits)
  ARM: spear: fix typos in comments
  soc/microchip: fix invalid free in mpfs_sys_controller_delete
  soc: s4: Add support for power domains controller
  dt-bindings: power: add Amlogic s4 power domains bindings
  ARM: at91: add support in soc driver for new SAMA5D29
  soc: mediatek: mmsys: add sw0_rst_offset in mmsys driver data
  dt-bindings: memory: renesas,rpc-if: Document RZ/V2L SoC
  memory: emif: check the pointer temp in get_device_details()
  memory: emif: Add check for setup_interrupts
  dt-bindings: arm: mediatek: mmsys: add support for MT8186
  dt-bindings: mediatek: add compatible for MT8186 pwrap
  soc: mediatek: pwrap: add pwrap driver for MT8186 SoC
  soc: mediatek: mmsys: add mmsys reset control for MT8186
  soc: mediatek: mtk-infracfg: Disable ACP on MT8192
  soc: ti: k3-socinfo: Add AM62x JTAG ID
  soc: mediatek: add MTK mutex support for MT8186
  soc: mediatek: mmsys: add mt8186 mmsys routing table
  soc: mediatek: pm-domains: Add support for mt8186
  dt-bindings: power: Add MT8186 power domains
  soc: mediatek: pm-domains: Add support for mt8195
  ...
2022-03-23 18:23:13 -07:00
Anup Patel
6abf32f1d9
cpuidle: Add RISC-V SBI CPU idle driver
The RISC-V SBI HSM extension provides HSM suspend call which can
be used by Linux RISC-V to enter platform specific low-power state.

This patch adds a CPU idle driver based on RISC-V SBI calls which
will populate idle states from device tree and use SBI calls to
entry these idle states.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Acked-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-03-10 09:29:51 -08:00
Anup Patel
9d976d6721
cpuidle: Factor-out power domain related code from PSCI domain driver
The generic power domain related code in PSCI domain driver is largely
independent of PSCI and can be shared with RISC-V SBI domain driver
hence we factor-out this code into dt_idle_genpd.c and dt_idle_genpd.h.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-03-10 09:29:44 -08:00
Li RongQing
659b66e98b cpuidle: haltpoll: Call cpuidle_poll_state_init() later
Call cpuidle_poll_state_init() only if it is needed to avoid doing
useless work.

Signed-off-by: Li RongQing <lirongqing@baidu.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-03-09 19:59:45 +01:00
Stephan Gerhold
52beb1fc23 firmware: qcom: scm: Drop cpumask parameter from set_boot_addr()
qcom_scm_set_cold/warm_boot_addr() currently take a cpumask parameter,
but it's not very useful because at the end we always set the same entry
address for all CPUs. This also allows speeding up probe of
cpuidle-qcom-spm a bit because only one SCM call needs to be made to
the TrustZone firmware, instead of one per CPU.

The main reason for this change is that it allows implementing the
"multi-cluster" variant of the set_boot_addr() call more easily
without having to rely on functions that break in certain build
configurations or that are not exported to modules.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211201130505.257379-4-stephan@gerhold.net
2022-02-03 21:54:48 -06:00
Stephan Gerhold
0ee30ace67 cpuidle: qcom-spm: Check if any CPU is managed by SPM
At the moment, the "qcom-spm-cpuidle" platform device is always created,
even if none of the CPUs is actually managed by the SPM. On non-qcom
platforms this will result in infinite probe-deferral due to the
failing qcom_scm_is_available() call.

To avoid this, look through the CPU DT nodes and check if there is
actually any CPU managed by a SPM (as indicated by the qcom,saw property).
It should also be available because e.g. MSM8916 has qcom,saw defined
but it's typically not enabled with ARM64/PSCI firmwares.

This is needed in preparation of a follow-up change that calls
qcom_scm_set_warm_boot_addr() a single time before registering any
cpuidle drivers. Otherwise this call might be made even on devices
that have this driver enabled but actually make use of PSCI.

Fixes: 60f3692b5f ("cpuidle: qcom_spm: Detach state machine from main SPM handling")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/86e3e09f-a8d7-3dff-3fc6-ddd7d30c5d78@samsung.com/
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211201130505.257379-2-stephan@gerhold.net
2022-02-03 21:54:48 -06:00
Greg Kroah-Hartman
7dfc5b6e90 cpuidle: use default_groups in kobj_type
There are currently 2 ways to create a set of sysfs files for a
kobj_type, through the default_attrs field, and the default_groups
field.  Move the cpuidle sysfs code to use default_groups field which
has been the preferred way since aa30f47cf6 ("kobject: Add support for
default attribute groups to kobj_type") so that we can soon get rid of
the obsolete default_attrs field.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-01-05 18:31:17 +01:00
Yang Li
d00ebcc654 cpuidle: Fix cpuidle_remove_state_sysfs() kerneldoc comment
Fix function name in sysfs.c kernel-doc comment
to remove a warning found by running scripts/kernel-doc,
which is caused by using 'make W=1'.

drivers/cpuidle/sysfs.c:512: warning: expecting prototype for
cpuidle_remove_driver_sysfs(). Prototype was for
cpuidle_remove_state_sysfs() instead

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-12-17 16:20:23 +01:00
Jason Wang
14e6c70671 cpuidle: menu: Fix typo in a comment
The word `these' in a comment is repeated, so drop one.

Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-11-24 17:30:44 +01:00
Linus Torvalds
d461e96cd2 ARM: SoC drivers for 5.16
These are all the driver updates for SoC specific drivers. There
 are a couple of subsystems with individual maintainers picking up
 their patches here:
 
  - The reset controller subsystem add support for a few new SoC
    variants to existing drivers, along with other minor improvements
 
  - The OP-TEE subsystem gets a driver for the ARM FF-A transport
 
  - The memory controller subsystem has improvements for Tegra,
    Mediatek, Renesas, Freescale and Broadcom specific drivers.
 
  - The tegra cpuidle driver changes get merged through this
    tree this time. There are only minor changes, but they depend
    on other tegra driver updates here.
 
  - The ep93xx platform finally moves to using the drivers/clk/
    subsystem, moving the code out of arch/arm in the process.
    This depends on a small sound driver change that is included
    here as well.
 
  - There are some minor updates for Qualcomm and Tegra specific
    firmware drivers.
 
 The other driver updates are mainly for drivers/soc, which contains
 a mixture of vendor specific drivers that don't really fit elsewhere:
 
  - Mediatek drivers gain more support for MT8192, with new support for
    hw-mutex and mmsys routing, plus support for reset lines in the
    mmsys driver.
 
  - Qualcomm gains a new "sleep stats" driver, and support for
    the "Generic Packet Router" in the APR driver.
 
  - There is a new user interface for routing the UARTS on ASpeed
    BMCs, something that apparently nobody else has needed so far.
 
  - More drivers can now be built as loadable modules, in particular
    for Broadcom and Samsung platforms.
 
  - Lots of improvements to the TI sysc driver for better suspend/resume
    support
 
 Finally, there are lots of minor cleanups and new device IDs for
 amlogic, renesas, tegra, qualcomm, mediateka, samsung, imx, layerscape,
 allwinner, broadcom, and omap.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmGCvKgACgkQmmx57+YA
 GNnNfw/8DDTfMUycVvtaNslYlWri0/2O0nSqhNIIbTAcVuD/x5qo/McDhKuv+ldM
 BoTDMjRYZfQkrNXSEj3MaxB9E0o6Srva5SM8y4+Koe0VVtvEVovjYkXOhXqSEWWl
 aqVIe0S6Y1rF/KxJlvAfGxYHb5d+6aYqzdmhjURpXNGxqpSHb9/hqisY97Q9TpnD
 6lQZOz9d1JNDq0eOh1qjcfuMjg1EHZHDZJyioCvyX38KIl2q7p3ll2z/eqrrDhQZ
 TrvL/YVosTXqBcAfi47Oz+n/CX2i0MrjVO8nfPSGOq5UL4Al3SZD4XYY96IOIQrH
 +XGFigGGAkV2LfKSEPNJWaq7g+SiQUr2jc3p8b4Zxde8/+5M127/gotiPddyG2LX
 1OnFRnPskgRApGqHjGEcEzzJUTag7Hc+YVH82TMEHZhSDMq6i30k9UnyfXsziZDV
 8CrkOpjuSg+YxFv/83bfa1pIoYtFfjGr16mq4muajodnX7+b7My9iv+2Oo2iQM9y
 DwRUKj7+eap23SEUpi4et6HlNpoF6yJMbt5Ae1k+gTK2DvQ4Cx6n4QJz/I7WC1Wp
 BdVhvSH8XVppVLtQqODud+VWvLgLerRxUpGRdbS8r5VsnNUJTvaS4YGMpm9616G7
 TrgUSSvsyu1lLqbWMh+pOCk4l3r64vSUn581hrIw6jtioNGvMdE=
 =tUuj
 -----END PGP SIGNATURE-----

Merge tag 'drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "These are all the driver updates for SoC specific drivers. There are a
  couple of subsystems with individual maintainers picking up their
  patches here:

   - The reset controller subsystem add support for a few new SoC
     variants to existing drivers, along with other minor improvements

   - The OP-TEE subsystem gets a driver for the ARM FF-A transport

   - The memory controller subsystem has improvements for Tegra,
     Mediatek, Renesas, Freescale and Broadcom specific drivers.

   - The tegra cpuidle driver changes get merged through this tree this
     time. There are only minor changes, but they depend on other tegra
     driver updates here.

   - The ep93xx platform finally moves to using the drivers/clk/
     subsystem, moving the code out of arch/arm in the process. This
     depends on a small sound driver change that is included here as
     well.

   - There are some minor updates for Qualcomm and Tegra specific
     firmware drivers.

  The other driver updates are mainly for drivers/soc, which contains a
  mixture of vendor specific drivers that don't really fit elsewhere:

   - Mediatek drivers gain more support for MT8192, with new support for
     hw-mutex and mmsys routing, plus support for reset lines in the
     mmsys driver.

   - Qualcomm gains a new "sleep stats" driver, and support for the
     "Generic Packet Router" in the APR driver.

   - There is a new user interface for routing the UARTS on ASpeed BMCs,
     something that apparently nobody else has needed so far.

   - More drivers can now be built as loadable modules, in particular
     for Broadcom and Samsung platforms.

   - Lots of improvements to the TI sysc driver for better
     suspend/resume support"

  Finally, there are lots of minor cleanups and new device IDs for
  amlogic, renesas, tegra, qualcomm, mediateka, samsung, imx,
  layerscape, allwinner, broadcom, and omap"

* tag 'drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (179 commits)
  optee: Fix spelling mistake "reclain" -> "reclaim"
  Revert "firmware: qcom: scm: Add support for MC boot address API"
  qcom: spm: allow compile-testing
  firmware: arm_ffa: Remove unused 'compat_version' variable
  soc: samsung: exynos-chipid: add exynosautov9 SoC support
  firmware: qcom: scm: Don't break compile test on non-ARM platforms
  soc: qcom: smp2p: Add of_node_put() before goto
  soc: qcom: apr: Add of_node_put() before return
  soc: qcom: qcom_stats: Fix client votes offset
  soc: qcom: rpmhpd: fix sm8350_mxc's peer domain
  dt-bindings: arm: cpus: Document qcom,msm8916-smp enable-method
  ARM: qcom: Add qcom,msm8916-smp enable-method identical to MSM8226
  firmware: qcom: scm: Add support for MC boot address API
  soc: qcom: spm: Add 8916 SPM register data
  dt-bindings: soc: qcom: spm: Document qcom,msm8916-saw2-v3.0-cpu
  soc: qcom: socinfo: Add PM8150C and SMB2351 models
  firmware: qcom_scm: Fix error retval in __qcom_scm_is_call_available()
  soc: aspeed: Add UART routing support
  soc: fsl: dpio: rename the enqueue descriptor variable
  soc: fsl: dpio: use an explicit NULL instead of 0
  ...
2021-11-03 17:00:52 -07:00
Arnd Bergmann
936fc53f3d Qualcomm driver updates for v5.16
This drops the use of power-domains for exposing the load_state from the
 QMP driver to clients, to avoid issues related to system suspend.
 
 SMP2P becomes wakeup capable, to allow dying remoteprocs to wake up
 Linux from suspend to perform recovery.
 
 It adds RPM power-domain support for SM6350 and MSM8953 and base RPM
 support for MSM8953 and QCM2290.
 
 It adds support for MSM8996, SDM630 and SDM660 in the SPM driver, which
 will enable the introduction of proper voltage scaling of the CPU
 subsystem.
 
 Support for releasing secondary CPUs on MSM8226 is introduced.
 
 The Asynchronous Packet Router (APR) driver is extended to support the
 new Generic Packet Router (GPR) variant, which is used to communicate
 with the firmware in the new AudioReach audio driver.
 
 Lastly it transitions a number of drivers to safer string functions, as
 well as switching things to use devm_platform_ioremap_resource().
 -----BEGIN PGP SIGNATURE-----
 
 iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmFlxugbHGJqb3JuLmFu
 ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3F3A0P/ixLiu0XktPOyFZ+3Ag/
 5KKan6wlH8JO0AfxbOolk0MkC1/8uk1V+Kuw4b/22jTO4w/9Illi9jSmV0wR3IBh
 26sWpyxNK7N+7uAnBDqlZekQYTg5xKqJGn69kxe0oIm8yAogGkxZnlIWt7JGtWS0
 NcyLLe9gS/B/q6ppTkxlYhSMB3Qp6bU/lRjBWTcHlxaNxGyNbGw4zp5ncze8ui9R
 s0JdFhJ/T1ptuWuIhrEWXEVapQtf0pgPvYSWxRYoBRU4N1F4HcRcLVpUU6eSvFEg
 BKxN11dCW4o0njLBpdPtg3u7AL31A95OPFiVwpWEb6Wov1DAdQYfYSoc7r2uqKvL
 QgvE/Fq1uPNPsFH2AgJjmku7nb2S0UP2msIhsZjugwxCQXtHgv2uPdYSN/MOudEZ
 MdjbbAHKW9+TR4gTVzA7b7OVzB73+tjHo/4hUjy8J5RlRKujbzHHXLRjvpNAILqn
 y457eUFqYxR1C3CKy2GrgR/PvNcBdDVq0ikuv4elYZEIaPL/Wxg6V7RJSHzgAgU/
 7XArrGvCXdLXy/e07KJ4Su74OBOsXnqLLr+Xsw5+h42XCnDfmI3caQlQjTXxJxN4
 EifHOoPCa8JNtXzWKSBSO7Pb5teSYh5XlAQs8nGVbrKMhly/MDLeNzSL+uu8DGNw
 B9Cf/mM9bhs3Q69Z37WgOdK0
 =FE4j
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmFnQuMACgkQmmx57+YA
 GNk90g/9F5Sh8wfMQ3WYZMu10L431dXYKkafccK8SFgNhTxTuJ7xPbJzXxFQW6Qp
 Ky0DAKcJB/tW/jCMh7L/d7pET4tedRncZd6Pk8kkn8uRC9qiTEFyPKP+4trADnhw
 Q/gf8xbEJz13aDzFbfW2Ko9Rx0HJQ/BSWVzZ5fpkUmoSSBnxm+rq9T3e10BNX1QT
 /Bg1M77zyYWtlPKexjxBEz7EZuQIEmN9gkCCriYTMw34hfVYszsNkIZnIGfe/wAa
 F6iSjIwVqf4DbM6QzabNoCUzZf50Ij4Vdlhvk5FUt3quPIvcULzIxQxI3o/J5sJ2
 2mowPuiVjmqx4R8XFILod0+KU4NNUGcb2YFLZg+XjbopArfLZaa2OV40m2QDY/Ay
 /BHXBtxLDDcDqwOX6Y7NEfbNFUqLlFv00vuZEJ9KT/19ZfJgCw4qoxw44aldjQEo
 3pvEACOHLKoI+FOeb6LHL0erfc1jz/qul37oWI361rDIfWsWsZtbyc+gItMDLGYa
 C1qUHoP5vMmse0tILT6AJNR23aGJFapKkzTNWB6j5Pi/0sdv3zGbhxubf+TxMRtx
 5BhEP2N5pHdKVopxVSG2JVOtT12jE68tV0E00erEoPIG35C+DyADn5i9lg4g20Ix
 MwxwtgAC0cws8tpwsDvFOCj8SPn9HDtEGMJMejo5xuEIxqjAb2E=
 =LLU7
 -----END PGP SIGNATURE-----

Merge tag 'qcom-drivers-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers

Qualcomm driver updates for v5.16

This drops the use of power-domains for exposing the load_state from the
QMP driver to clients, to avoid issues related to system suspend.

SMP2P becomes wakeup capable, to allow dying remoteprocs to wake up
Linux from suspend to perform recovery.

It adds RPM power-domain support for SM6350 and MSM8953 and base RPM
support for MSM8953 and QCM2290.

It adds support for MSM8996, SDM630 and SDM660 in the SPM driver, which
will enable the introduction of proper voltage scaling of the CPU
subsystem.

Support for releasing secondary CPUs on MSM8226 is introduced.

The Asynchronous Packet Router (APR) driver is extended to support the
new Generic Packet Router (GPR) variant, which is used to communicate
with the firmware in the new AudioReach audio driver.

Lastly it transitions a number of drivers to safer string functions, as
well as switching things to use devm_platform_ioremap_resource().

* tag 'qcom-drivers-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (40 commits)
  soc: qcom: apr: Add GPR support
  soc: dt-bindings: qcom: add gpr bindings
  soc: qcom: apr: make code more reuseable
  soc: dt-bindings: qcom: apr: deprecate qcom,apr-domain property
  soc: dt-bindings: qcom: apr: convert to yaml
  dt-bindings: soc: qcom: aoss: Delete unused power-domain definitions
  dt-bindings: msm/dp: Remove aoss-qmp header
  soc: qcom: aoss: Drop power domain support
  dt-bindings: soc: qcom: aoss: Drop the load state power-domain
  soc: qcom: smp2p: Add wakeup capability to SMP2P IRQ
  dt-bindings: power: rpmpd: Add SM6350 to rpmpd binding
  dt-bindings: soc: qcom: aoss: Add SM6350 compatible
  soc: qcom: llcc: Disable MMUHWT retention
  soc: qcom: smd-rpm: Add QCM2290 compatible
  dt-bindings: soc: qcom: smd-rpm: Add QCM2290 compatible
  firmware: qcom_scm: Add compatible for MSM8953 SoC
  dt-bindings: firmware: qcom-scm: Document msm8953 bindings
  soc: qcom: pdr: Prefer strscpy over strcpy
  soc: qcom: rpmh-rsc: Make use of the helper function devm_platform_ioremap_resource_byname()
  soc: qcom: gsbi: Make use of the helper function devm_platform_ioremap_resource()
  ...

Link: https://lore.kernel.org/r/20211012173442.1017010-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-13 22:34:43 +02:00
Dmitry Osipenko
bdb1ffdad3 cpuidle: tegra: Check whether PMC is ready
Check whether PMC is ready before proceeding with the cpuidle registration.
This fixes racing with the PMC driver probe order, which results in a
disabled deepest CC6 idling state if cpuidle driver is probed before the
PMC.

Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-10-05 19:11:40 +02:00
Dmitry Osipenko
faae6c9f2e cpuidle: tegra: Enable compile testing
Enable compile testing of tegra-cpuidle driver.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-10-05 19:11:40 +02:00
Anel Orazgaliyeva
e5f5a66c9a cpuidle: Fix kobject memory leaks in error paths
Commit c343bf1ba5 ("cpuidle: Fix three reference count leaks")
fixes the cleanup of kobjects; however, it removes kfree() calls
altogether, leading to memory leaks.

Fix those and also defer the initialization of dev->kobj_dev until
after the error check, so that we do not end up with a dangling
pointer.

Fixes: c343bf1ba5 ("cpuidle: Fix three reference count leaks")
Signed-off-by: Anel Orazgaliyeva <anelkz@amazon.de>
Suggested-by: Aman Priyadarshi <apeureka@amazon.de>
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-10-01 20:42:22 +02:00
AngeloGioacchino Del Regno
60f3692b5f cpuidle: qcom_spm: Detach state machine from main SPM handling
In commit a871be6b8e ("cpuidle: Convert Qualcomm SPM driver to a generic
CPUidle driver") the SPM driver has been converted to a
generic CPUidle driver: that was mainly made to simplify the
driver and that was a great accomplishment;
Though, at that time, this driver was only applicable to ARM 32-bit SoCs,
lacking logic about the handling of newer generation SAW.

In preparation for the enablement of SPM features on AArch64/ARM64,
split the cpuidle-qcom-spm driver in two: the CPUIdle related
state machine (currently used only on ARM SoCs) stays there, while
the SPM communication handling lands back in soc/qcom/spm.c and
also making sure to not discard the simplifications that were
introduced in the aforementioned commit.

Since now the "two drivers" are split, the SCM dependency in the
main SPM handling is gone and for this reason it was also possible
to move the SPM initialization early: this will also make sure that
whenever the SAW CPUIdle driver is getting initialized, the SPM
driver will be ready to do the job.

Please note that the anticipation of the SPM initialization was
also done to optimize the boot times on platforms that have their
CPU/L2 idle states managed by other means (such as PSCI), while
needing SAW initialization for other purposes, like AVS control.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Stephan Gerhold <stephan@gerhold.net>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210729155609.608159-2-angelogioacchino.delregno@somainline.org
2021-09-21 17:41:48 -05:00
Linus Torvalds
86406a9e73 - Core Frameworks
- Add support for registering devices via MFD cells to Simple MFD (I2C)
 
  - New Drivers
    - Add support for Renesas Synchronization Management Unit (SMU)
 
  - New Device Support
    - Add support for N5010 to Intel M10 BMC
    - Add support for Cannon Lake to Intel LPSS ACPI
    - Add support for Samsung SSG{1,2} to ST-Ericsson's U8500 family
    - Add support for TQMx110EB and TQMxE40x to TQ-Systems PLD TQMx86
 
  - New Functionality
    - Add support for GPIO to Intel LPC ICH
    - Add support for Reset to Texas Instruments TPS65086
 
  - Fix-ups
    - Trivial, sorting, whitespace, renaming, etc; mt6360-core, db8500-prcmu-regs, tqmx86
    - Device Tree fiddling; syscon, axp20x, qcom,pm8008, ti,tps65086, brcm,cru
    - Use proper APIs for IRQ map resolution; ab8500-core, stmpe, tc3589x, wm8994-irq
    - Pass 'supplied-from' property through axp288_fuel_gauge via swnode
    - Remove unused file entry; MAINTAINERS
    - Make interrupt line optional; tps65086
    - Rename db8500-cpuidle driver symbol; db8500-prcmu
    - Remove support for unused hardware; tqmx86
    - Provide a standard LPC clock frequency for unknown boards; tqmx86
    - Remove unused code; ti_am335x_tscadc
    - Use of_iomap() instead of ioremap(); syscon
 
  - Bug Fixes
    - Clear GPIO IRQ resource flags when no IRQ is set; tqmx86
    - Fix incorrect/misleading frequencies; db8500-prcmu
    - Mitigate namespace clash with other GPIOBASE users
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAmE3bf4ACgkQUa+KL4f8
 d2F2YxAApt42Zm+DrwQvt6a5k8ZS3LVIfiMBqVZOdlcN9LcoqKsZKgnQRyqjjKul
 rX4YcCLqfwv01FxBk37Xf1toTnbIvggKZjjEt7tf2ZHO1oxzuHnnODVrm6mxXEeX
 inDK8fBvmevebq5K2VH5yEAZJ5my1/IjcBs8S/txeCbW8BYu/U6Bw0gMfuQjdW64
 +3jgKk+o03uN9OhGKIp2eBNoF/RkdautpfK6Pyl3bPmKxCZ7BMRrGw11I+HjZLqz
 AzfAmcQne0m8kQ8rvLYXyQrNu51xCcfxThrw8A4diTKqOXjxX0W9/OfgdcCo8uBa
 OVz22DKkK+UyajvNnfMZLzVfj9HtZTRBPl13OZN7WA42oztLWT7IgEQq+MTr1fef
 FOQJ1njiix6oXwKMdDR/Z9xoVfxQkcLIwCIw/wMC+kT/bKdZI0UtJok5iCH2Se0A
 zcdHKqc3khUR+55A9Ie1JeaZAlCViFEXdpF2SQjqBQ6c6r94mMhJryTWDcDV6Thm
 e9GwUXzG2J6u6/0mSHdeBNMDVbDetbWKTTRMMD5FlKv3d60ZvczutT7qjbkiol8S
 OzS+YnjtwlMtPKpK/4+Wgfbsuu1KWOdHkIcVvEj9fdf2Kkqhsi2kXqq95GnkeZP5
 vyZ1mt/sneX9LnHi3NCPQJcXj2wBZSmsnsN/pZJZhTFFu8UBTIU=
 =7Zv8
 -----END PGP SIGNATURE-----

Merge tag 'mfd-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "Core Frameworks:
   - Add support for registering devices via MFD cells to Simple MFD (I2C)

  New Drivers:
   - Add support for Renesas Synchronization Management Unit (SMU)

  New Device Support:
   - Add support for N5010 to Intel M10 BMC
   - Add support for Cannon Lake to Intel LPSS ACPI
   - Add support for Samsung SSG{1,2} to ST-Ericsson's U8500 family
   - Add support for TQMx110EB and TQMxE40x to TQ-Systems PLD TQMx86

  New Functionality:
   - Add support for GPIO to Intel LPC ICH
   - Add support for Reset to Texas Instruments TPS65086

  Fix-ups:
   - Trivial, sorting, whitespace, renaming, etc; mt6360-core, db8500-prcmu-regs, tqmx86
   - Device Tree fiddling; syscon, axp20x, qcom,pm8008, ti,tps65086, brcm,cru
   - Use proper APIs for IRQ map resolution; ab8500-core, stmpe, tc3589x, wm8994-irq
   - Pass 'supplied-from' property through axp288_fuel_gauge via swnode
   - Remove unused file entry; MAINTAINERS
   - Make interrupt line optional; tps65086
   - Rename db8500-cpuidle driver symbol; db8500-prcmu
   - Remove support for unused hardware; tqmx86
   - Provide a standard LPC clock frequency for unknown boards; tqmx86
   - Remove unused code; ti_am335x_tscadc
   - Use of_iomap() instead of ioremap(); syscon

  Bug Fixes:
   - Clear GPIO IRQ resource flags when no IRQ is set; tqmx86
   - Fix incorrect/misleading frequencies; db8500-prcmu
   - Mitigate namespace clash with other GPIOBASE users"

* tag 'mfd-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (31 commits)
  mfd: lpc_sch: Rename GPIOBASE to prevent build error
  mfd: syscon: Use of_iomap() instead of ioremap()
  dt-bindings: mfd: Add Broadcom CRU
  mfd: ti_am335x_tscadc: Delete superfluous error message
  mfd: tqmx86: Assume 24MHz LPC clock for unknown boards
  mfd: tqmx86: Add support for TQ-Systems DMI IDs
  mfd: tqmx86: Add support for TQMx110EB and TQMxE40x
  mfd: tqmx86: Fix typo in "platform"
  mfd: tqmx86: Remove incorrect TQMx90UC board ID
  mfd: tqmx86: Clear GPIO IRQ resource when no IRQ is set
  mfd: simple-mfd-i2c: Add support for registering devices via MFD cells
  mfd/cpuidle: ux500: Rename driver symbol
  mfd: tps65086: Add cell entry for reset driver
  mfd: tps65086: Make interrupt line optional
  dt-bindings: mfd: Convert tps65086.txt to YAML
  MAINTAINERS: Adjust ARM/NOMADIK/Ux500 ARCHITECTURES to file renaming
  mfd: db8500-prcmu: Handle missing FW variant
  mfd: db8500-prcmu: Rename register header
  mfd: axp20x: Add supplied-from property to axp288_fuel_gauge cell
  mfd: Don't use irq_create_mapping() to resolve a mapping
  ...
2021-09-07 12:38:59 -07:00
Linus Torvalds
7cca308cfd powerpc updates for 5.15
- Convert pseries & powernv to use MSI IRQ domains.
 
  - Rework the pseries CPU numbering so that CPUs that are removed, and later re-added, are
    given a CPU number on the same node as previously, when possible.
 
  - Add support for a new more flexible device-tree format for specifying NUMA distances.
 
  - Convert powerpc to GENERIC_PTDUMP.
 
  - Retire sbc8548 and sbc8641d board support.
 
  - Various other small features and fixes.
 
 Thanks to: Alexey Kardashevskiy, Aneesh Kumar K.V, Anton Blanchard, Cédric Le Goater,
 Christophe Leroy, Emmanuel Gil Peyrot, Fabiano Rosas, Fangrui Song, Finn Thain, Gautham R.
 Shenoy, Hari Bathini, Joel Stanley, Jordan Niethe, Kajol Jain, Laurent Dufour, Leonardo
 Bras, Lukas Bulwahn, Marc Zyngier, Masahiro Yamada, Michal Suchanek, Nathan Chancellor,
 Nicholas Piggin, Parth Shah, Paul Gortmaker, Pratik R. Sampat, Randy Dunlap, Sebastian
 Andrzej Siewior, Srikar Dronamraju, Wan Jiabing, Xiongwei Song, Zheng Yongjun.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAmEyHTYTHG1wZUBlbGxl
 cm1hbi5pZC5hdQAKCRBR6+o8yOGlgDo3D/9aXMVP2wsEMNB0XhTiJ1UUdi311Uq9
 PvkAaGZH14ZqZLVigeiD3gt6YzTH0cEuGj6qgwsJrPDjF8FESnMbBsprMLr5/qE1
 itWRGMAMCFaeTcB9ogYVJkzwg6RN2ZgIqoq4NVswNSXoAQGWb+1bvXq3RnXXNuGR
 TQmLL02poNC6nX0YbRaQoT1Xx4nfUTiKHhU+Aok9uOCMJIyYZVATR6Qafb7/j7tO
 UvjwOHztbu84lcJOGmSnw4LcmwNORLuP9IwR0r+O1M3ijEZqDo9TPkvtSz8HZwjU
 mxdJwhrUmN0euMcghuiFxW+1XG2eM49ugsdJugiezG2RaIijbIp0nAIvdeaKAgT1
 OSSwvWCQ0fkTPyLXE+O6tVqMhlUMdqQlRcyNwmN9svIip9VnwGNq3vA4ePlJm6Fi
 i0i/tLqVNlJwFokZ7blW5g8SRgGRuFfXd5XUYLFvy5Teez+/7b1mW95gPQZSJ8kV
 Tbx2e0nHAPX4hCAxJ1AB3/zTlnjY+4+WJ9bD5XdgXkeVE8PPh1BEkulhMi1R1OMj
 57D1W6OgsBu/Pze78wjAvwO8+NAb1T/2mv2Bd/LY6Q+7hNDqOOhuajyBTxbH41FG
 sqx5bKjKOwgTybfV9A0Eo0e4FQBX07yXltBFHaPlyA4sOsIhM59+PxNrEwN1eZrQ
 LVVsdBXg8pHxrw==
 =EbN0
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:

 - Convert pseries & powernv to use MSI IRQ domains.

 - Rework the pseries CPU numbering so that CPUs that are removed, and
   later re-added, are given a CPU number on the same node as
   previously, when possible.

 - Add support for a new more flexible device-tree format for specifying
   NUMA distances.

 - Convert powerpc to GENERIC_PTDUMP.

 - Retire sbc8548 and sbc8641d board support.

 - Various other small features and fixes.

Thanks to Alexey Kardashevskiy, Aneesh Kumar K.V, Anton Blanchard,
Cédric Le Goater, Christophe Leroy, Emmanuel Gil Peyrot, Fabiano Rosas,
Fangrui Song, Finn Thain, Gautham R.  Shenoy, Hari Bathini, Joel
Stanley, Jordan Niethe, Kajol Jain, Laurent Dufour, Leonardo Bras, Lukas
Bulwahn, Marc Zyngier, Masahiro Yamada, Michal Suchanek, Nathan
Chancellor, Nicholas Piggin, Parth Shah, Paul Gortmaker, Pratik R.
Sampat, Randy Dunlap, Sebastian Andrzej Siewior, Srikar Dronamraju, Wan
Jiabing, Xiongwei Song, and Zheng Yongjun.

* tag 'powerpc-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (154 commits)
  powerpc/bug: Cast to unsigned long before passing to inline asm
  powerpc/ptdump: Fix generic ptdump for 64-bit
  KVM: PPC: Fix clearing never mapped TCEs in realmode
  powerpc/pseries/iommu: Rename "direct window" to "dma window"
  powerpc/pseries/iommu: Make use of DDW for indirect mapping
  powerpc/pseries/iommu: Find existing DDW with given property name
  powerpc/pseries/iommu: Update remove_dma_window() to accept property name
  powerpc/pseries/iommu: Reorganize iommu_table_setparms*() with new helper
  powerpc/pseries/iommu: Add ddw_property_create() and refactor enable_ddw()
  powerpc/pseries/iommu: Allow DDW windows starting at 0x00
  powerpc/pseries/iommu: Add ddw_list_new_entry() helper
  powerpc/pseries/iommu: Add iommu_pseries_alloc_table() helper
  powerpc/kernel/iommu: Add new iommu_table_in_use() helper
  powerpc/pseries/iommu: Replace hard-coded page shift
  powerpc/numa: Update cpu_cpu_map on CPU online/offline
  powerpc/numa: Print debug statements only when required
  powerpc/numa: convert printk to pr_xxx
  powerpc/numa: Drop dbg in favour of pr_debug
  powerpc/smp: Enable CACHE domain for shared processor
  powerpc/smp: Update cpu_core_map on all PowerPc systems
  ...
2021-09-03 11:22:50 -07:00
Linus Walleij
f28fd3b6f7 mfd/cpuidle: ux500: Rename driver symbol
The PRCMU driver defines this as a DT node but there are no bindings
for it and it needs no data from the device tree. Just spawn the
device directly in the same way as the watchdog.

Name it "db8500-cpuidle" since there are no ambitions to support any
more SoCs than this one.

This rids this annoying boot message:
[    0.032610] cpuidle-dbx500: Failed to locate of_node [id: 0]

However I think the device still spawns and work just fine, despite
not finding a device tree node.

Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: linux-pm@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-08-16 13:42:34 +01:00
Nathan Chancellor
d04691d373 cpuidle: pseries: Mark pseries_idle_proble() as __init
After commit 7cbd631d4dec ("cpuidle: pseries: Fixup CEDE0 latency only
for POWER10 onwards"), pseries_idle_probe() is no longer inlined when
compiling with clang, which causes a modpost warning:

WARNING: modpost: vmlinux.o(.text+0xc86a54): Section mismatch in
reference from the function pseries_idle_probe() to the function
.init.text:fixup_cede0_latency()
The function pseries_idle_probe() references
the function __init fixup_cede0_latency().
This is often because pseries_idle_probe lacks a __init
annotation or the annotation of fixup_cede0_latency is wrong.

pseries_idle_probe() is a non-init function, which calls
fixup_cede0_latency(), which is an init function, explaining the
mismatch. pseries_idle_probe() is only called from
pseries_processor_idle_init(), which is an init function, so mark
pseries_idle_probe() as __init so there is no more warning.

Fixes: 054e44ba99 ("cpuidle: pseries: Add function to parse extended CEDE records")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210803211547.1093820-1-nathan@kernel.org
2021-08-04 10:53:38 +10:00
Rafael J. Wysocki
4adae7dd10 cpuidle: teo: Rename two local variables in teo_select()
Rename two local variables in teo_select() so that their names better
reflect their purpose.

No functional impact.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-08-03 15:18:57 +02:00
Rafael J. Wysocki
c2ec772b87 cpuidle: teo: Fix alternative idle state lookup
There are three mistakes in the loop in teo_select() that is looking
for an alternative candidate idle state.  First, it should walk all
of the idle states shallower than the current candidate one,
including all of the disabled ones, but it terminates after the first
enabled idle state.  Second, it should not terminate its last step
if idle state 0 is disabled (which is related to the first issue).
Finally, it may return the current alternative candidate idle state
prematurely if the time span criterion is not met by the idle state
under consideration at the moment.

To address the issues mentioned above, make the loop in question walk
all of the idle states shallower than the current candidate idle state
all the way down to idle state 0 and rearrange the checks in it.

Fixes: 77577558f2 ("cpuidle: teo: Rework most recent idle duration values treatment")
Reported-by: Doug Smythies <dsmythies@telus.net>
Tested-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-08-03 15:18:57 +02:00
Gautham R. Shenoy
71737a6c2a cpuidle: pseries: Do not cap the CEDE0 latency in fixup_cede0_latency()
Currently in fixup_cede0_latency() code, we perform the fixup the
CEDE(0) exit latency value only if minimum advertized extended CEDE
latency values are less than 10us. This was done so as to not break
the expected behaviour on POWER8 platforms where the advertised
latency was higher than the default 10us, which would delay the SMT
folding on the core.

However, after the earlier patch "cpuidle/pseries: Fixup CEDE0 latency
only for POWER10 onwards", we can be sure that the fixup of CEDE0
latency is going to happen only from POWER10 onwards. Hence
unconditionally use the minimum exit latency provided by the platform.

Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1626676399-15975-3-git-send-email-ego@linux.vnet.ibm.com
2021-08-03 22:33:37 +10:00
Gautham R. Shenoy
50741b70b0 cpuidle: pseries: Fixup CEDE0 latency only for POWER10 onwards
Commit d947fb4c96 ("cpuidle: pseries: Fixup exit latency for
CEDE(0)") sets the exit latency of CEDE(0) based on the latency values
of the Extended CEDE states advertised by the platform

On POWER9 LPARs, the firmwares advertise a very low value of 2us for
CEDE1 exit latency on a Dedicated LPAR. The latency advertized by the
PHYP hypervisor corresponds to the latency required to wakeup from the
underlying hardware idle state. However the wakeup latency from the
LPAR perspective should include

1. The time taken to transition the CPU from the Hypervisor into the
   LPAR post wakeup from platform idle state

2. Time taken to send the IPI from the source CPU (waker) to the idle
   target CPU (wakee).

1. can be measured via timer idle test, where we queue a timer, say
for 1ms, and enter the CEDE state. When the timer fires, in the timer
handler we compute how much extra timer over the expected 1ms have we
consumed. On a a POWER9 LPAR the numbers are

CEDE latency measured using a timer (numbers in ns)
N       Min      Median   Avg       90%ile  99%ile    Max    Stddev
400     2601     5677     5668.74    5917    6413     9299   455.01

1. and 2. combined can be determined by an IPI latency test where we
send an IPI to an idle CPU and in the handler compute the time
difference between when the IPI was sent and when the handler ran. We
see the following numbers on POWER9 LPAR.

CEDE latency measured using an IPI (numbers in ns)
N       Min      Median   Avg       90%ile  99%ile    Max    Stddev
400     711      7564     7369.43   8559    9514      9698   1200.01

Suppose, we consider the 99th percentile latency value measured using
the IPI to be the wakeup latency, the value would be 9.5us This is in
the ballpark of the default value of 10us.

Hence, use the exit latency of CEDE(0) based on the latency values
advertized by platform only from POWER10 onwards. The values
advertized on POWER10 platforms is more realistic and informed by the
latency measurements. For earlier platforms stick to the default value
of 10us. The fix was suggested by Michael Ellerman.

Fixes: d947fb4c96 ("cpuidle: pseries: Fixup exit latency for CEDE(0)")
Reported-by: Enrico Joedecke <joedecke@de.ibm.com>
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1626676399-15975-2-git-send-email-ego@linux.vnet.ibm.com
2021-08-03 22:33:19 +10:00
Rafael J. Wysocki
ad6b010d81 - Add support for the Qcom MSM8226 (Bartosz Dudziak)
-----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmDRhckACgkQqDIjiipP
 6E98lggAiMzuvF8eSvq+maQc787J8vfteM7UiSyexpdh/0GUqDOVM1CBxUV5MGoE
 hRZe/hSW8PfgkZ7eGwe2bRnzSs60i6tQT9l2zkgdpuImlpCz/kZrEGkYjmP16zzM
 81yVPpan4QgKWRMKI8A1SVdbkRvwmw9HuQxOyBcNaR9qlxjhYwt2Kihga80UjCUs
 HkaKSP16JNkepmzCHBdaIyMW2cTlN8r+pCe8g5dBZ5hXwVCjcW7CGBxtQBzFgS8O
 t5V06hkgvG619qfEgvipbCdOREgZgNz95alth5OIE4Ihqyb3N4u9xHC8Ah9AsQ/u
 UAF1r0KClULdoVvGSIr+CnhOLCWb9A==
 =doID
 -----END PGP SIGNATURE-----

Merge tag 'cpuidle-v5.14-rc1' of https://git.linaro.org/people/daniel.lezcano/linux

Pull ARM cpuidle updates for v5.14 from Daniel Lezcano:

"- Add support for Qcom MSM8226 (Bartosz Dudziak)"

* tag 'cpuidle-v5.14-rc1' of https://git.linaro.org/people/daniel.lezcano/linux:
  cpuidle: qcom: Add SPM register data for MSM8226
  dt-bindings: arm: msm: Add SAW2 for MSM8226
2021-06-30 14:56:51 +02:00
Linus Torvalds
3563f55ce6 Power management updates for 5.14-rc1
- Make intel_pstate support hybrid processors using abstract
    performance units in the HWP interface (Rafael Wysocki).
 
  - Add Icelake servers and Cometlake support in no-HWP mode to
    intel_pstate (Giovanni Gherdovich).
 
  - Make cpufreq_online() error path be consistent with the CPU
    device removal path in cpufreq (Rafael Wysocki).
 
  - Clean up 3 cpufreq drivers and the statistics code (Hailong Liu,
    Randy Dunlap, Shaokun Zhang).
 
  - Make intel_idle use special idle state parameters for C6 when
    package C-states are disabled (Chen Yu).
 
  - Rework the TEO (timer events oriented) cpuidle governor to address
    some theoretical shortcomings in it (Rafael Wysocki).
 
  - Drop unneeded semicolon from the TEO governor (Wan Jiabing).
 
  - Modify the runtime PM framework to accept unassigned suspend
    and resume callback pointers (Ulf Hansson).
 
  - Improve pm_runtime_get_sync() documentation (Krzysztof Kozlowski).
 
  - Improve device performance states support in the generic power
    domains (genpd) framework (Ulf Hansson).
 
  - Fix some documentation issues in genpd (Yang Yingliang).
 
  - Make the operating performance points (OPP) framework use the
    required-opps DT property in use cases that are not related to
    genpd (Hsin-Yi Wang).
 
  - Make lazy_link_required_opp_table() use list_del_init instead of
    list_del/INIT_LIST_HEAD (Yang Yingliang).
 
  - Simplify wake IRQs handling in the core system-wide sleep support
    code and clean up some coding style inconsistencies in it (Tian
    Tao, Zhen Lei).
 
  - Add cooling support to the tegra30 devfreq driver and improve its
    DT bindings (Dmitry Osipenko).
 
  - Fix some assorted issues in the devfreq core and drivers (Chanwoo
    Choi, Dong Aisheng, YueHaibing).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmDbaFwSHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxR/gP/inFFjdwWpq3r6XD5P4XeVvum/MEjqQs
 rDUDHXgEEZmWGL9CpQ0PxhXyvc7SSqtNLakECTXxrOccfMbo0NKQtjCt8eMO1XMu
 nrAcp68hr/Rg2TaenRC3j0+oGXPzOw5/Mg5Y9subRymdI3o5HyoJNjBkU+LlkdGs
 HC7k8zWPqKQaEoFgjOpYPuXKf2bvEm2jIh4dzmtCRWXBUOxDgN0z6Kckhs59xrU+
 +CLP/W4XMDrWSYdd2zjPV2IBNsqfePFchZ+t2CMQwYycI+KJr2s8tLbAFnQXfxLz
 WRqxpZKvMUPthKsK2/vgnCQkQKhGq39NmlHdqRdJm8uivCPx1Q2uuHRYF9782M+o
 cWuO60VvtUax0RIk1prP2l6JBBU/3Hvln7uf4cBnIeh/3QZKKygIgnNI1YwaqXSq
 zP4EWY00kKNmKwRUZAkDR9ZavXHiHvtoytT44XU/NxS+YXh6nMLC34CeuDUQaqni
 JvniXQyZCIWecZhwbOpW+FmAXMBCyvqXarDM0Zw4coWoyFLN7Y8ow9C5T5EWcgQ+
 pKyGhS698HiePPJrwDOtOqzfPqxcgXEWUqwmxTeD8MRDSMlamzPnRJh+wxlrIdv9
 2c8SAOSD7xvRlQQcsOpEVcKVkjsWDy7tvK6/O2CtoBsUpZOXtKIKJhr7ixnLN3Ej
 XHX/voFVDIao
 =mgLK
 -----END PGP SIGNATURE-----

Merge tag 'pm-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "These add hybrid processors support to the intel_pstate driver and
  make it work with more processor models when HWP is disabled, make the
  intel_idle driver use special C6 idle state paremeters when package
  C-states are disabled, add cooling support to the tegra30 devfreq
  driver, rework the TEO (timer events oriented) cpuidle governor,
  extend the OPP (operating performance points) framework to use the
  required-opps DT property in more cases, fix some issues and clean up
  a number of assorted pieces of code.

  Specifics:

   - Make intel_pstate support hybrid processors using abstract
     performance units in the HWP interface (Rafael Wysocki).

   - Add Icelake servers and Cometlake support in no-HWP mode to
     intel_pstate (Giovanni Gherdovich).

   - Make cpufreq_online() error path be consistent with the CPU device
     removal path in cpufreq (Rafael Wysocki).

   - Clean up 3 cpufreq drivers and the statistics code (Hailong Liu,
     Randy Dunlap, Shaokun Zhang).

   - Make intel_idle use special idle state parameters for C6 when
     package C-states are disabled (Chen Yu).

   - Rework the TEO (timer events oriented) cpuidle governor to address
     some theoretical shortcomings in it (Rafael Wysocki).

   - Drop unneeded semicolon from the TEO governor (Wan Jiabing).

   - Modify the runtime PM framework to accept unassigned suspend and
     resume callback pointers (Ulf Hansson).

   - Improve pm_runtime_get_sync() documentation (Krzysztof Kozlowski).

   - Improve device performance states support in the generic power
     domains (genpd) framework (Ulf Hansson).

   - Fix some documentation issues in genpd (Yang Yingliang).

   - Make the operating performance points (OPP) framework use the
     required-opps DT property in use cases that are not related to
     genpd (Hsin-Yi Wang).

   - Make lazy_link_required_opp_table() use list_del_init instead of
     list_del/INIT_LIST_HEAD (Yang Yingliang).

   - Simplify wake IRQs handling in the core system-wide sleep support
     code and clean up some coding style inconsistencies in it (Tian
     Tao, Zhen Lei).

   - Add cooling support to the tegra30 devfreq driver and improve its
     DT bindings (Dmitry Osipenko).

   - Fix some assorted issues in the devfreq core and drivers (Chanwoo
     Choi, Dong Aisheng, YueHaibing)"

* tag 'pm-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (39 commits)
  PM / devfreq: passive: Fix get_target_freq when not using required-opp
  cpufreq: Make cpufreq_online() call driver->offline() on errors
  opp: Allow required-opps to be used for non genpd use cases
  cpuidle: teo: remove unneeded semicolon in teo_select()
  dt-bindings: devfreq: tegra30-actmon: Add cooling-cells
  dt-bindings: devfreq: tegra30-actmon: Convert to schema
  PM / devfreq: userspace: Use DEVICE_ATTR_RW macro
  PM: runtime: Clarify documentation when callbacks are unassigned
  PM: runtime: Allow unassigned ->runtime_suspend|resume callbacks
  PM: runtime: Improve path in rpm_idle() when no callback
  PM: hibernate: remove leading spaces before tabs
  PM: sleep: remove trailing spaces and tabs
  PM: domains: Drop/restore performance state votes for devices at runtime PM
  PM: domains: Return early if perf state is already set for the device
  PM: domains: Split code in dev_pm_genpd_set_performance_state()
  cpuidle: teo: Use kerneldoc documentation in admin-guide
  cpuidle: teo: Rework most recent idle duration values treatment
  cpuidle: teo: Change the main idle state selection logic
  cpuidle: teo: Cosmetic modification of teo_select()
  cpuidle: teo: Cosmetic modifications of teo_update()
  ...
2021-06-29 13:36:06 -07:00
Wan Jiabing
795e0e38de cpuidle: teo: remove unneeded semicolon in teo_select()
Fix following coccicheck warning:
drivers/cpuidle/governors/teo.c:315:10-11: Unneeded semicolon

Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-06-17 14:13:53 +02:00
Bartosz Dudziak
0f0ac1e4ee cpuidle: qcom: Add SPM register data for MSM8226
Add MSM8226 register data to SPM AVS Wrapper 2 (SAW2) power controller
driver.

Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bartosz Dudziak <bartosz.dudziak@snejp.pl>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210612205335.9730-3-bartosz.dudziak@snejp.pl
2021-06-16 20:03:26 +02:00
Rafael J. Wysocki
154ae8bb3c cpuidle: teo: Use kerneldoc documentation in admin-guide
There are two descriptions of the TEO (Timer Events Oriented) cpuidle
governor in the kernel source tree, one in the C file containing its
code and one in cpuidle.rst which is part of admin-guide.

Instead of trying to keep them both in sync and in order to reduce
text duplication, include the governor description from the C file
directly into cpuidle.rst.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-06-11 18:36:45 +02:00
Rafael J. Wysocki
77577558f2 cpuidle: teo: Rework most recent idle duration values treatment
The TEO (Timer Events Oriented) cpuidle governor uses several most
recent idle duration values for a given CPU to refine the idle state
selection in case the previous long-term trends have not been
followed recently and a new trend appears to be forming.  That is
done by computing the average of the most recent idle duration
values falling below the time till the next timer event ("sleep
length"), provided that they are the majority of the most recent
idle duration values taken into account, and using it as the new
expected idle duration value.

However, idle state selection based on that value may not be optimal,
because the average does not really indicate which of the idle states
with target residencies less than or equal to it is likely to be the
best fit.

Thus, instead of computing the average, make the governor carry out
computations based on the distribution of the most recent idle
duration values among the bins corresponding to different idle
states.  Namely, if the majority of the most recent idle duration
values taken into consideration are less than the current sleep
length (which means that the CPU is likely to wake up early), find
the idle state closest to the "candidate" one "matching" the sleep
length whose target residency is less than or equal to the majority
of the most recent idle duration values that have fallen below the
current sleep length (which means that it is likely to be "shallow
enough" this time).

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-06-11 18:36:45 +02:00
Rafael J. Wysocki
c410a9a142 cpuidle: teo: Change the main idle state selection logic
Two aspects of the current main idle state selection logic in the
TEO (Timer Events Oriented) cpuidle governor are quite questionable.

First of all, the "hits" and "misses" metrics used by it are only
updated for a given idle state if the time till the next timer event
("sleep length") is between the target residency of that state and
the target residency of the next one.  Consequently, they are likely
to become stale if the sleep length tends to fall outside that
interval which increases the likelihood of subomtimal idle state
selection.

Second, the decision on whether or not to select the idle state
"matching" the sleep length is based on the metrics collected for
that state alone, whereas in principle the metrics collected for
the other idle states should be taken into consideration when that
decision is made.  For example, if the measured idle duration is less
than the target residency of the idle state "matching" the sleep
length, then it is also less than the target residency of any deeper
idle state and that should be taken into account when considering
whether or not to select any of those states, but currently it is
not.

In order to address the above shortcomings, modify the main idle
state selection logic in the TEO governor to take the metrics
collected for all of the idle states into account when deciding
whether or not to select the one "matching" the sleep length.

Moreover, drop the "misses" metric that becomes redundant after the
above change and rename the "early_hits" metric to "intercepts" so
that its role is better reflected by its name (the idea being that
if a CPU wakes up earlier than indicated by the sleep length, then
it must be a result of a non-timer interrupt that "intercepts" the
CPU).

Also rename the states[] array in struct struct teo_cpu to
state_bins[] to avoid confusing it with the states[] array in
struct cpuidle_driver and update the documentation to match the
new code (and make it more comprehensive while at it).

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-06-11 18:36:45 +02:00
Rafael J. Wysocki
b18e0de1cf cpuidle: teo: Cosmetic modification of teo_select()
Initialize local variables in teo_select() where they are declared.

No functional impact.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-06-11 18:36:45 +02:00
Rafael J. Wysocki
f53cbdab01 cpuidle: teo: Cosmetic modifications of teo_update()
Rename a local variable in teo_update() so that its purpose is better
reflected by its name and use one more local variable in the loop
over the CPU idle states in that function to make the code somewhat
easier to read.

No functional impact.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-06-11 18:36:45 +02:00
Alexey Dobriyan
8fc2858e57 sched: Make nr_iowait_cpu() return 32-bit value
Runqueue ->nr_iowait counters are 32-bit anyway.

Propagate 32-bitness into other code, but don't try too hard.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210422200228.1423391-3-adobriyan@gmail.com
2021-05-12 21:34:16 +02:00
Rafael J. Wysocki
71f4dd3441 Merge back earlier cpuidle updates for v5.13. 2021-04-08 20:05:49 +02:00
He Ying
498ba2a8a2 cpuidle: Fix ARM_QCOM_SPM_CPUIDLE configuration
When CONFIG_ARM_QCOM_SPM_CPUIDLE is y and CONFIG_MMU is not set,
compiling errors are encountered as follows:

drivers/cpuidle/cpuidle-qcom-spm.o: In function `spm_dev_probe':
cpuidle-qcom-spm.c:(.text+0x140): undefined reference to `cpu_resume_arm'
cpuidle-qcom-spm.c:(.text+0x148): undefined reference to `cpu_resume_arm'

Note that cpu_resume_arm is defined when MMU is set. So, add dependency
on MMU in ARM_QCOM_SPM_CPUIDLE configuration.

Fixes: a871be6b8e ("cpuidle: Convert Qualcomm SPM driver to a generic CPUidle driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: He Ying <heying24@huawei.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210406123328.92904-1-heying24@huawei.com
2021-04-08 19:54:14 +02:00
Dmitry Osipenko
2dabed4777 cpuidle: tegra: Remove do_idle firmware call
The do_idle firmware call is unused by all Tegra SoCs, hence remove it in
order to keep driver's code clean.

Tested-by: Anton Bambura <jenneron@protonmail.com> # TF701 T114
Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30
Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya T30
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210302095405.28453-2-digetx@gmail.com
2021-04-08 19:54:14 +02:00
Dmitry Osipenko
32c8c34d81 cpuidle: tegra: Fix C7 idling state on Tegra114
Trusted Foundation firmware doesn't implement the do_idle call and in
this case suspending should fall back to the common suspend path. In order
to fix this issue we will unconditionally set the NOFLUSH_L2 mode via
firmware call, which is a NO-OP on Tegra30/124, and then proceed to the
C7 idling, like it was done by the older Tegra114 cpuidle driver.

Fixes: 14e086baca ("cpuidle: tegra: Squash Tegra114 driver into the common driver")
Cc: stable@vger.kernel.org # 5.7+
Reported-by: Anton Bambura <jenneron@protonmail.com> # TF701 T114
Tested-by: Anton Bambura <jenneron@protonmail.com> # TF701 T114
Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30
Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya T30
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210302095405.28453-1-digetx@gmail.com
2021-04-08 19:54:14 +02:00
Rafael J. Wysocki
060e3535ad cpuidle: menu: Take negative "sleep length" values into account
Make the menu governor check the tick_nohz_get_next_hrtimer()
return value so as to avoid dealing with negative "sleep length"
values and make it use that value directly when the tick is stopped.

While at it, rename local variable delta_next in menu_select() to
delta_tick which better reflects its purpose.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-04-07 19:26:44 +02:00
Rafael J. Wysocki
030adec9f6 cpuidle: teo: Take negative "sleep length" values into account
Modify the TEO governor to take possible negative return values of
tick_nohz_get_next_hrtimer() into account by changing the data type
of some variables used by it to s64 which allows it to carry out
computations without potentially problematic data type conversions
into u64.

Also change the computations in teo_select() so that the negative
values themselves are handled in a natural way to avoid adding extra
negative value checks to that function.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-04-07 19:26:44 +02:00
Rafael J. Wysocki
d3c33be1f3 cpuidle: teo: Adjust handling of very short idle times
If the time till the next timer event is shorter than the target
residency of the first idle state (state 0), the TEO governor does
not update its metrics for any idle states, but arguably it should
record a "hit" for idle state 0 in that case, so modify it to do
that.

Accordingly, also make it record an "early hit" for idle state 0 if
the measured idle duration is less than its target residency, which
allows one branch more to be dropped from teo_update().

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-04-07 19:26:44 +02:00
Rafael J. Wysocki
2ab80d46fe cpuidle: Use s64 as exit_latency_ns and target_residency_ns data type
Subsequent changes will cause the exit_latency_ns and target_residency_ns
fields in struct cpuidle_state to be used in computations in which data
type conversions to u64 may turn a negative number close to zero into
a verly large positive number leading to incorrect results.

In preparation for that, change the data type of the fields mentioned
above to s64, but ensure that they will not be negative themselves.

No intentional functional impact.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-04-07 19:26:44 +02:00
Linus Torvalds
48c1c40ab4 ARM: SoC drivers for v5.11
There are a couple of subsystems maintained by other people that
 merge their drivers through the SoC tree, those changes include:
 
  - The SCMI firmware framework gains support for sensor notifications
    and for controlling voltage domains.
 
  - A large update for the Tegra memory controller driver, integrating
    it better with the interconnect framework
 
  - The memory controller subsystem gains support for Mediatek MT8192
 
  - The reset controller framework gains support for sharing pulsed
    resets
 
 For Soc specific drivers in drivers/soc, the main changes are
 
  - The Allwinner/sunxi MBUS gets a rework for the way it handles
    dma_map_ops and offsets between physical and dma address spaces.
 
  - An errata fix plus some cleanups for Freescale Layerscape SoCs
 
  - A cleanup for renesas drivers regarding MMIO accesses.
 
  - New SoC specific drivers for Mediatek MT8192 and MT8183 power domains
 
  - New SoC specific drivers for Aspeed AST2600 LPC bus control
    and SoC identification.
 
  - Core Power Domain support for Qualcomm MSM8916, MSM8939, SDM660
    and SDX55.
 
  - A rework of the TI AM33xx 'genpd' power domain support to use
    information from DT instead of platform data
 
  - Support for TI AM64x SoCs
 
  - Allow building some Amlogic drivers as modules instead of built-in
 
 Finally, there are numerous cleanups and smaller bug fixes for
 Mediatek, Tegra, Samsung, Qualcomm, TI OMAP, Amlogic, Rockchips,
 Renesas, and Xilinx SoCs.
 
 There is a trivial conflict in the cedrus driver, with two branches
 adding the same CEDRUS_CAPABILITY_H265_DEC flag, and another trivial
 remove/remove conflict in linux/dma-mapping.h.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl/alSUACgkQmmx57+YA
 GNm7GRAAlNMVi7F0f4Ixf1bEh+J2QUonYIpZfrdxOLFwISGQ+nstGrFW2He/OeQv
 KAi027tZLl6Sdzjy809cLDPA4Z2IKwjVWhEbBHybvy1+irPYjnixtLd0x3YvPhjH
 iadlcjQ3uaGue8PvubK6CVnBEy82A+Pp29n9i4A4wX/8w+BVIhVsxwQWUBF8pFXE
 3La2UZYZMVMvVZMrpTOqwCgdmLDCk+RLMVZ1IiRqBEBq5/DVq03uIXgjGEOrq8tl
 PXC89w7K510Is891mbBdBThQf+pZkU1vwORuknDcEJKWs9ngbEha7ebVgp32kbFl
 pi8DEK205d106WQgfn0Zxkpbsp8XD058wDILwkhBcteXlBaUEL6btGVLDTUCJZuv
 /pkH8tL4lNGpThQFbCEXC8oHZBp2xk55P+SW9RRZOoA5tAp+sz7hlf3y3YKdCSxv
 4xybeeVOAgjl01WtbEC7CuIkqcKVSQ7njhLhC8r5ASteNywDThqxLT6nd0VegcQc
 YH3Eu9QRXpvFwQ35zMkTMWa27bMG5d60fp90bWT0R5amXZpxJJot87w8trFCxv74
 mE5KvCbefCRNsTt8GOBA/WR7hVaG369g07qOvs7g4LjJEM3Nl2h/A4/zVFef9O0t
 yq3Nm4YCGfDSAQXzGR2SJ3nxiqbDknzJTAtZPf4BmbaMuPOIJ5k=
 =BjJf
 -----END PGP SIGNATURE-----

Merge tag 'arm-soc-drivers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "There are a couple of subsystems maintained by other people that merge
  their drivers through the SoC tree, those changes include:

   - The SCMI firmware framework gains support for sensor notifications
     and for controlling voltage domains.

   - A large update for the Tegra memory controller driver, integrating
     it better with the interconnect framework

   - The memory controller subsystem gains support for Mediatek MT8192

   - The reset controller framework gains support for sharing pulsed
     resets

  For Soc specific drivers in drivers/soc, the main changes are

   - The Allwinner/sunxi MBUS gets a rework for the way it handles
     dma_map_ops and offsets between physical and dma address spaces.

   - An errata fix plus some cleanups for Freescale Layerscape SoCs

   - A cleanup for renesas drivers regarding MMIO accesses.

   - New SoC specific drivers for Mediatek MT8192 and MT8183 power
     domains

   - New SoC specific drivers for Aspeed AST2600 LPC bus control and SoC
     identification.

   - Core Power Domain support for Qualcomm MSM8916, MSM8939, SDM660 and
     SDX55.

   - A rework of the TI AM33xx 'genpd' power domain support to use
     information from DT instead of platform data

   - Support for TI AM64x SoCs

   - Allow building some Amlogic drivers as modules instead of built-in

  Finally, there are numerous cleanups and smaller bug fixes for
  Mediatek, Tegra, Samsung, Qualcomm, TI OMAP, Amlogic, Rockchips,
  Renesas, and Xilinx SoCs"

* tag 'arm-soc-drivers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (222 commits)
  soc: mediatek: mmsys: Specify HAS_IOMEM dependency for MTK_MMSYS
  firmware: xilinx: Properly align function parameter
  firmware: xilinx: Add a blank line after function declaration
  firmware: xilinx: Remove additional newline
  firmware: xilinx: Fix kernel-doc warnings
  firmware: xlnx-zynqmp: fix compilation warning
  soc: xilinx: vcu: add missing register NUM_CORE
  soc: xilinx: vcu: use vcu-settings syscon registers
  dt-bindings: soc: xlnx: extract xlnx, vcu-settings to separate binding
  soc: xilinx: vcu: drop useless success message
  clk: samsung: mark PM functions as __maybe_unused
  soc: samsung: exynos-chipid: initialize later - with arch_initcall
  soc: samsung: exynos-chipid: order list of SoCs by name
  memory: jz4780_nemc: Fix potential NULL dereference in jz4780_nemc_probe()
  memory: ti-emif-sram: only build for ARMv7
  memory: tegra30: Support interconnect framework
  memory: tegra20: Support hardware versioning and clean up OPP table initialization
  dt-bindings: memory: tegra20-emc: Document opp-supported-hw property
  soc: rockchip: io-domain: Fix error return code in rockchip_iodomain_probe()
  reset-controller: ti: force the write operation when assert or deassert
  ...
2020-12-16 16:38:41 -08:00
Linus Torvalds
b4ec805464 Power management updates for 5.11-rc1
- Use local_clock() instead of jiffies in the cpufreq statistics to
    improve accuracy (Viresh Kumar).
 
  - Fix up OPP usage in the cpufreq-dt and qcom-cpufreq-nvmem cpufreq
    drivers (Viresh Kumar).
 
  - Clean up the cpufreq core, the intel_pstate driver and the
    schedutil cpufreq governor (Rafael Wysocki).
 
  - Fix up error code paths in the sti-cpufreq and mediatek cpufreq
    drivers (Yangtao Li, Qinglang Miao).
 
  - Fix cpufreq_online() to return error codes instead of success (0)
    in all cases when it fails (Wang ShaoBo).
 
  - Add mt8167 support to the mediatek cpufreq driver and blacklist
    mt8516 in the cpufreq-dt-platdev driver (Fabien Parent).
 
  - Modify the tegra194 cpufreq driver to always return values from
    the frequency table as the current frequency and clean up that
    driver (Sumit Gupta, Jon Hunter).
 
  - Modify the arm_scmi cpufreq driver to allow it to discover the
    power scale present in the performance protocol and provide this
    information to the Energy Model (Lukasz Luba).
 
  - Add missing MODULE_DEVICE_TABLE to several cpufreq drivers (Pali
    Rohár).
 
  - Clean up the CPPC cpufreq driver (Ionela Voinescu).
 
  - Fix NVMEM_IMX_OCOTP dependency in the imx cpufreq driver (Arnd
    Bergmann).
 
  - Rework the poling interval selection for the polling state in
    cpuidle (Mel Gorman).
 
  - Enable suspend-to-idle for PSCI OSI mode in the PSCI cpuidle
    driver (Ulf Hansson).
 
  - Modify the OPP framework to support empty (node-less) OPP tables
    in DT for passing dependency information (Nicola Mazzucato).
 
  - Fix potential lockdep issue in the OPP core and clean up the OPP
    core (Viresh Kumar).
 
  - Modify dev_pm_opp_put_regulators() to accept a NULL argument and
    update its users accordingly (Viresh Kumar).
 
  - Add frequency changes tracepoint to devfreq (Matthias Kaehlcke).
 
  - Add support for governor feature flags to devfreq, make devfreq
    sysfs file permissions depend on the governor and clean up the
    devfreq core (Chanwoo Choi).
 
  - Clean up the tegra20 devfreq driver and deprecate it to allow
    another driver based on EMC_STAT to be used instead of it (Dmitry
    Osipenko).
 
  - Add interconnect support to the tegra30 devfreq driver, allow it
    to take the interconnect and OPP information from DT and clean it
    up ((Dmitry Osipenko).
 
  - Add interconnect support to the exynos-bus devfreq driver along
    with interconnect properties documentation (Sylwester Nawrocki).
 
  - Add suport for AMD Fam17h and Fam19h processors to the RAPL power
    capping driver (Victor Ding, Kim Phillips).
 
  - Fix handling of overly long constraint names in the powercap
    framework (Lukasz Luba).
 
  - Fix the wakeup configuration handling for bridges in the ACPI
    device power management core (Rafael Wysocki).
 
  - Add support for using an abstract scale for power units in the
    Energy Model (EM) and document it (Lukasz Luba).
 
  - Add em_cpu_energy() micro-optimization to the EM (Pavankumar
    Kondeti).
 
  - Modify the generic power domains (genpd) framwework to support
    suspend-to-idle (Ulf Hansson).
 
  - Fix creation of debugfs nodes in genpd (Thierry Strudel).
 
  - Clean up genpd (Lina Iyer).
 
  - Clean up the core system-wide suspend code and make it print
    driver flags for devices with debug enabled (Alex Shi, Patrice
    Chotard, Chen Yu).
 
  - Modify the ACPI system reboot code to make it prepare for system
    power off to avoid confusing the platform firmware (Kai-Heng Feng).
 
  - Update the pm-graph (multiple changes, mostly usability-related)
    and cpupower (online and offline CPU information support) PM
    utilities (Todd Brandt, Brahadambal Srinivasan).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAl/Y8mcSHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxjY4QAKsNFJeEtjGCxq7MxQIML3QLAsdJM9of
 9kkY9skMEw4v1TRmyy7sW9jZW2pLSRcLJwWRKWu4143qUS3YUp2DQ0lqX4WyXoWu
 BhnkhkMUl6iCeBO8CWnt8zsTuqSa20A13sL9LyqN1+7OZKHD8StbT4hKjBncdNNN
 4aDj+1uAPyOgj2iCUZuHQ8DtpBvOLjgTh367vbhbufjeJ//8/9+R7s4Xzrj7wtmv
 JlE0LDgvge9QeGTpjhxQJzn0q2/H5fg9jbmjPXUfbHJNuyKhrqnmjGyrN5m256JI
 8DqGqQtJpmFp7Ihrur3uKTk3gWO05YwJ1FdeEooAKEjEMObm5xuYhKVRoDhmlJAu
 G6ui+OAUvNR0FffJtbzvWe/pLovLGOEOHdvTrZxUF8Abo6br3untTm8rKTi1fhaF
 wWndSMw0apGsPzCx5T+bE7AbJz2QHFpLhaVAutenuCzNI8xoMlxNKEzsaVz/+FqL
 Pq/PdFaM4vNlMbv7hkb/fujkCs/v3EcX2ihzvt7I2o8dBS0D1X8A4mnuWJmiGslw
 1ftbJ6M9XacwkPBTHPgeXxJh2C1yxxe5VQ9Z5fWWi7sPOUeJnUwxKaluv+coFndQ
 sO6JxsPQ4hQihg8yOxLEkL6Wn68sZlmp+u2Oj+TPFAsAGANIA8rJlBPo1ppJWvdQ
 j1OCIc/qzwpH
 =BVdX
 -----END PGP SIGNATURE-----

Merge tag 'pm-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "These update cpufreq (core and drivers), cpuidle (polling state
  implementation and the PSCI driver), the OPP (operating performance
  points) framework, devfreq (core and drivers), the power capping RAPL
  (Running Average Power Limit) driver, the Energy Model support, the
  generic power domains (genpd) framework, the ACPI device power
  management, the core system-wide suspend code and power management
  utilities.

  Specifics:

   - Use local_clock() instead of jiffies in the cpufreq statistics to
     improve accuracy (Viresh Kumar).

   - Fix up OPP usage in the cpufreq-dt and qcom-cpufreq-nvmem cpufreq
     drivers (Viresh Kumar).

   - Clean up the cpufreq core, the intel_pstate driver and the
     schedutil cpufreq governor (Rafael Wysocki).

   - Fix up error code paths in the sti-cpufreq and mediatek cpufreq
     drivers (Yangtao Li, Qinglang Miao).

   - Fix cpufreq_online() to return error codes instead of success (0)
     in all cases when it fails (Wang ShaoBo).

   - Add mt8167 support to the mediatek cpufreq driver and blacklist
     mt8516 in the cpufreq-dt-platdev driver (Fabien Parent).

   - Modify the tegra194 cpufreq driver to always return values from the
     frequency table as the current frequency and clean up that driver
     (Sumit Gupta, Jon Hunter).

   - Modify the arm_scmi cpufreq driver to allow it to discover the
     power scale present in the performance protocol and provide this
     information to the Energy Model (Lukasz Luba).

   - Add missing MODULE_DEVICE_TABLE to several cpufreq drivers (Pali
     Rohár).

   - Clean up the CPPC cpufreq driver (Ionela Voinescu).

   - Fix NVMEM_IMX_OCOTP dependency in the imx cpufreq driver (Arnd
     Bergmann).

   - Rework the poling interval selection for the polling state in
     cpuidle (Mel Gorman).

   - Enable suspend-to-idle for PSCI OSI mode in the PSCI cpuidle driver
     (Ulf Hansson).

   - Modify the OPP framework to support empty (node-less) OPP tables in
     DT for passing dependency information (Nicola Mazzucato).

   - Fix potential lockdep issue in the OPP core and clean up the OPP
     core (Viresh Kumar).

   - Modify dev_pm_opp_put_regulators() to accept a NULL argument and
     update its users accordingly (Viresh Kumar).

   - Add frequency changes tracepoint to devfreq (Matthias Kaehlcke).

   - Add support for governor feature flags to devfreq, make devfreq
     sysfs file permissions depend on the governor and clean up the
     devfreq core (Chanwoo Choi).

   - Clean up the tegra20 devfreq driver and deprecate it to allow
     another driver based on EMC_STAT to be used instead of it (Dmitry
     Osipenko).

   - Add interconnect support to the tegra30 devfreq driver, allow it to
     take the interconnect and OPP information from DT and clean it up
     (Dmitry Osipenko).

   - Add interconnect support to the exynos-bus devfreq driver along
     with interconnect properties documentation (Sylwester Nawrocki).

   - Add suport for AMD Fam17h and Fam19h processors to the RAPL power
     capping driver (Victor Ding, Kim Phillips).

   - Fix handling of overly long constraint names in the powercap
     framework (Lukasz Luba).

   - Fix the wakeup configuration handling for bridges in the ACPI
     device power management core (Rafael Wysocki).

   - Add support for using an abstract scale for power units in the
     Energy Model (EM) and document it (Lukasz Luba).

   - Add em_cpu_energy() micro-optimization to the EM (Pavankumar
     Kondeti).

   - Modify the generic power domains (genpd) framwework to support
     suspend-to-idle (Ulf Hansson).

   - Fix creation of debugfs nodes in genpd (Thierry Strudel).

   - Clean up genpd (Lina Iyer).

   - Clean up the core system-wide suspend code and make it print driver
     flags for devices with debug enabled (Alex Shi, Patrice Chotard,
     Chen Yu).

   - Modify the ACPI system reboot code to make it prepare for system
     power off to avoid confusing the platform firmware (Kai-Heng Feng).

   - Update the pm-graph (multiple changes, mostly usability-related)
     and cpupower (online and offline CPU information support) PM
     utilities (Todd Brandt, Brahadambal Srinivasan)"

* tag 'pm-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (86 commits)
  cpufreq: Fix cpufreq_online() return value on errors
  cpufreq: Fix up several kerneldoc comments
  cpufreq: stats: Use local_clock() instead of jiffies
  cpufreq: schedutil: Simplify sugov_update_next_freq()
  cpufreq: intel_pstate: Simplify intel_cpufreq_update_pstate()
  PM: domains: create debugfs nodes when adding power domains
  opp: of: Allow empty opp-table with opp-shared
  dt-bindings: opp: Allow empty OPP tables
  media: venus: dev_pm_opp_put_*() accepts NULL argument
  drm/panfrost: dev_pm_opp_put_*() accepts NULL argument
  drm/lima: dev_pm_opp_put_*() accepts NULL argument
  PM / devfreq: exynos: dev_pm_opp_put_*() accepts NULL argument
  cpufreq: qcom-cpufreq-nvmem: dev_pm_opp_put_*() accepts NULL argument
  cpufreq: dt: dev_pm_opp_put_regulators() accepts NULL argument
  opp: Allow dev_pm_opp_put_*() APIs to accept NULL opp_table
  opp: Don't create an OPP table from dev_pm_opp_get_opp_table()
  cpufreq: dt: Don't (ab)use dev_pm_opp_get_opp_table() to create OPP table
  opp: Reduce the size of critical section in _opp_kref_release()
  PM / EM: Micro optimization in em_cpu_energy
  cpufreq: arm_scmi: Discover the power scale in performance protocol
  ...
2020-12-15 16:30:31 -08:00
Mel Gorman
7a25759eaa cpuidle: Select polling interval based on a c-state with a longer target residency
It was noted that a few workloads that idle rapidly regressed when commit
36fcb42924 ("cpuidle: use first valid target residency as poll time")
was merged. The workloads in question were heavy communicators that idle
rapidly and were impacted by the c-state exit latency as the active CPUs
were not polling at the time of wakeup. As they were not particularly
realistic workloads, it was not considered to be a major problem.

Unfortunately, a bug was reported for a real workload in a production
environment that relied on large numbers of threads operating in a worker
pool pattern. These threads would idle for periods of time longer than the
C1 target residency and so incurred the c-state exit latency penalty. The
application is very sensitive to wakeup latency and indirectly relying
on behaviour prior to commit on a37b969a61 ("cpuidle: poll_state: Add
time limit to poll_idle()") to poll for long enough to avoid the exit
latency cost.

The target residency of C1 is typically very short. On some x86 machines,
it can be as low as 2 microseconds. In poll_idle(), the clock is checked
every POLL_IDLE_RELAX_COUNT interations of cpu_relax() and even one
iteration of that loop can be over 1 microsecond so the polling interval is
very close to the granularity of what poll_idle() can detect. Furthermore,
a basic ping pong workload like perf bench pipe has a longer round-trip
time than the 2 microseconds meaning that the CPU will almost certainly
not be polling when the ping-pong completes.

This patch selects a polling interval based on an enabled c-state that
has an target residency longer than 10usec. If there is no enabled-cstate
then polling will be up to a TICK_NSEC/16 similar to what it was up until
kernel 4.20. Polling for a full tick is unlikely (rescheduling event)
and is much longer than the existing target residencies for a deep c-state.

As an example, consider a CPU with the following c-state information from
an Intel CPU;

	residency	exit_latency
C1	2		2
C1E	20		10
C3	100		33
C6	400		133

The polling interval selected is 20usec. If booted with
intel_idle.max_cstate=1 then the polling interval is 250usec as the deeper
c-states were not available.

On an AMD EPYC machine, the c-state information is more limited and
looks like

	residency	exit_latency
C1	2		1
C2	800		400

The polling interval selected is 250usec. While C2 was considered, the
polling interval was clamped by CPUIDLE_POLL_MAX.

Note that it is not expected that polling will be a universal win. As
well as potentially trading power for performance, the performance is not
guaranteed if the extra polling prevented a turbo state being reached.
Making it a tunable was considered but it's driver-specific, may be
overridden by a governor and is not a guaranteed polling interval making
it difficult to describe without knowledge of the implementation.

tbench4
			     vanilla		    polling
Hmean     1        497.89 (   0.00%)      543.15 *   9.09%*
Hmean     2        975.88 (   0.00%)     1059.73 *   8.59%*
Hmean     4       1953.97 (   0.00%)     2081.37 *   6.52%*
Hmean     8       3645.76 (   0.00%)     4052.95 *  11.17%*
Hmean     16      6882.21 (   0.00%)     6995.93 *   1.65%*
Hmean     32     10752.20 (   0.00%)    10731.53 *  -0.19%*
Hmean     64     12875.08 (   0.00%)    12478.13 *  -3.08%*
Hmean     128    21500.54 (   0.00%)    21098.60 *  -1.87%*
Hmean     256    21253.70 (   0.00%)    21027.18 *  -1.07%*
Hmean     320    20813.50 (   0.00%)    20580.64 *  -1.12%*

Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-12-01 17:59:18 +01:00
Ingo Molnar
a787bdaff8 Merge branch 'linus' into sched/core, to resolve semantic conflict
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-11-27 11:10:50 +01:00
Peter Zijlstra
545b8c8df4 smp: Cleanup smp_call_function*()
Get rid of the __call_single_node union and cleanup the API a little
to avoid external code relying on the structure layout as much.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
2020-11-24 16:47:49 +01:00
Rafael J. Wysocki
0f6e2cb45b Merge back cpuidle changes for v5.11. 2020-11-23 12:49:28 +01:00
Dmitry Osipenko
c39de538a0 cpuidle: tegra: Annotate tegra_pm_set_cpu_in_lp2() with RCU_NONIDLE
Annotate tegra_pm_set[clear]_cpu_in_lp2() with RCU_NONIDLE in order to
fix lockdep warning about suspicious RCU usage of a spinlock during late
idling phase.

 WARNING: suspicious RCU usage
 ...
 include/trace/events/lock.h:13 suspicious rcu_dereference_check() usage!
 ...
  (dump_stack) from (lock_acquire)
  (lock_acquire) from (_raw_spin_lock)
  (_raw_spin_lock) from (tegra_pm_set_cpu_in_lp2)
  (tegra_pm_set_cpu_in_lp2) from (tegra_cpuidle_enter)
  (tegra_cpuidle_enter) from (cpuidle_enter_state)
  (cpuidle_enter_state) from (cpuidle_enter_state_coupled)
  (cpuidle_enter_state_coupled) from (cpuidle_enter)
  (cpuidle_enter) from (do_idle)
 ...

Tested-by: Peter Geis <pgwipeout@gmail.com>
Reported-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-11-16 13:24:32 +01:00
Ulf Hansson
670c90def0 cpuidle: psci: Enable suspend-to-idle for PSCI OSI mode
To select domain idlestates for cpuidle-psci when OSI mode has been
enabled, the PM domains via genpd are being managed through runtime PM.
This works fine for the regular idlepath, but it doesn't during system wide
suspend. More precisely, the domain idlestates becomes temporarily
disabled, which is because the PM core disables runtime PM for devices
during system wide suspend.

Later in the system suspend phase, genpd intends to deal with this from its
->suspend_noirq() callback, but this doesn't work as expected for a device
corresponding to a CPU, because the domain idlestates needs to be selected
on a per CPU basis (the PM core doesn't invoke the callbacks like that).

To address this problem, let's enable the syscore flag for the
corresponding CPU device that becomes successfully attached to its PM
domain (applicable only in OSI mode). This informs the PM core to skip
invoke the system wide suspend/resume callbacks for the device, thus also
prevents genpd from screwing up its internal state of it.

Moreover, to properly select a domain idlestate for the CPUs during
suspend-to-idle, let's assign a specific ->enter_s2idle() callback for the
corresponding domain idlestate (applicable only in OSI mode). From that
callback, let's invoke dev_pm_genpd_suspend|resume(), as this allows a
domain idlestate to be selected for the current CPU by genpd.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-11-10 20:42:01 +01:00
Marek Szyprowski
f1118a28be cpuidle: big.LITTLE: enable driver only on Peach-Pit/Pi Chromebooks
This driver always worked properly only on the Exynos 5420/5800 based
Chromebooks (Peach-Pit/Pi), so change the required compatible string to
the 'google,peach', to avoid enabling it on the other Exynos 542x/5800
boards, which hangs in such case. The main difference between Peach-Pit/Pi
and other Exynos 542x/5800 boards is the firmware - Peach platform doesn't
use secure firmware at all.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-10-26 10:15:24 +01:00
Linus Torvalds
96685f8666 powerpc updates for 5.10
- A series from Nick adding ARCH_WANT_IRQS_OFF_ACTIVATE_MM & selecting it for
    powerpc, as well as a related fix for sparc.
 
  - Remove support for PowerPC 601.
 
  - Some fixes for watchpoints & addition of a new ptrace flag for detecting ISA
    v3.1 (Power10) watchpoint features.
 
  - A fix for kernels using 4K pages and the hash MMU on bare metal Power9
    systems with > 16TB of RAM, or RAM on the 2nd node.
 
  - A basic idle driver for shallow stop states on Power10.
 
  - Tweaks to our sched domains code to better inform the scheduler about the
    hardware topology on Power9/10, where two SMT4 cores can be presented by
    firmware as an SMT8 core.
 
  - A series doing further reworks & cleanups of our EEH code.
 
  - Addition of a filter for RTAS (firmware) calls done via sys_rtas(), to
    prevent root from overwriting kernel memory.
 
  - Other smaller features, fixes & cleanups.
 
 Thanks to:
   Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Athira Rajeev, Biwen
   Li, Cameron Berkenpas, Cédric Le Goater, Christophe Leroy, Christoph Hellwig,
   Colin Ian King, Daniel Axtens, David Dai, Finn Thain, Frederic Barrat, Gautham
   R. Shenoy, Greg Kurz, Gustavo Romero, Ira Weiny, Jason Yan, Joel Stanley,
   Jordan Niethe, Kajol Jain, Konrad Rzeszutek Wilk, Laurent Dufour, Leonardo
   Bras, Liu Shixin, Luca Ceresoli, Madhavan Srinivasan, Mahesh Salgaonkar,
   Nathan Lynch, Nicholas Mc Guire, Nicholas Piggin, Nick Desaulniers, Oliver
   O'Halloran, Pedro Miraglia Franco de Carvalho, Pratik Rajesh Sampat, Qian Cai,
   Qinglang Miao, Ravi Bangoria, Russell Currey, Satheesh Rajendran, Scott
   Cheloha, Segher Boessenkool, Srikar Dronamraju, Stan Johnson, Stephen Kitt,
   Stephen Rothwell, Thiago Jung Bauermann, Tyrel Datwyler, Vaibhav Jain,
   Vaidyanathan Srinivasan, Vasant Hegde, Wang Wensheng, Wolfram Sang, Yang
   Yingliang, zhengbin.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAl+JBQoTHG1wZUBlbGxl
 cm1hbi5pZC5hdQAKCRBR6+o8yOGlgJJAD/0e3tsFP+9rFlxKSJlDcMW3w7kXDRXE
 tG40F1ubYFLU8wtFVR0De3njTRsz5HyaNU6SI8CwPq48mCa7OFn1D1OeHonHXDX9
 w6v3GE2S1uXXQnjm+czcfdjWQut0IwWBLx007/S23WcPff3Abc2irupKLNu+Gx29
 b/yxJHZSRJVX59jSV94HkdJS75mDHQ3oUOlFGXtuGcUZDufpD1ynRcQOjr0V/8JU
 F4WAblFSe7hiczHGqIvfhFVJ+OikEhnj2aEMAL8U7vxzrAZ7RErKCN9s/0Tf0Ktx
 FzNEFNLHZGqh+qNDpKKmM+RnaeO2Lcoc9qVn7vMHOsXPzx9F5LJwkI/DgPjtgAq/
 mFvGnQB/FapATnQeMluViC/qhEe5bQXLUfPP5i2+QOjK0QqwyFlUMgaVNfsY8jRW
 0Q/sNA72Opzst4WUTveCd4SOInlUuat09e5nLooCRLW7u7/jIiXNRSFNvpOiwkfF
 EcIPJsi6FUQ4SNbqpRSNEO9fK5JZrrUtmr0pg8I7fZhHYGcxEjqPR6IWCs3DTsak
 4/KhjhhTnP/IWJRw6qKAyNhEyEwpWqYZ97SIQbvSb1g/bS47AIdQdJRb0eEoRjhx
 sbbnnYFwPFkG4c1yQSIFanT9wNDQ2hFx/c/mRfbd7J+ordx9JsoqXjqrGuhsU/pH
 GttJLmkJ5FH+pQ==
 =akeX
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:

 - A series from Nick adding ARCH_WANT_IRQS_OFF_ACTIVATE_MM & selecting
   it for powerpc, as well as a related fix for sparc.

 - Remove support for PowerPC 601.

 - Some fixes for watchpoints & addition of a new ptrace flag for
   detecting ISA v3.1 (Power10) watchpoint features.

 - A fix for kernels using 4K pages and the hash MMU on bare metal
   Power9 systems with > 16TB of RAM, or RAM on the 2nd node.

 - A basic idle driver for shallow stop states on Power10.

 - Tweaks to our sched domains code to better inform the scheduler about
   the hardware topology on Power9/10, where two SMT4 cores can be
   presented by firmware as an SMT8 core.

 - A series doing further reworks & cleanups of our EEH code.

 - Addition of a filter for RTAS (firmware) calls done via sys_rtas(),
   to prevent root from overwriting kernel memory.

 - Other smaller features, fixes & cleanups.

Thanks to: Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V,
Athira Rajeev, Biwen Li, Cameron Berkenpas, Cédric Le Goater, Christophe
Leroy, Christoph Hellwig, Colin Ian King, Daniel Axtens, David Dai, Finn
Thain, Frederic Barrat, Gautham R. Shenoy, Greg Kurz, Gustavo Romero,
Ira Weiny, Jason Yan, Joel Stanley, Jordan Niethe, Kajol Jain, Konrad
Rzeszutek Wilk, Laurent Dufour, Leonardo Bras, Liu Shixin, Luca
Ceresoli, Madhavan Srinivasan, Mahesh Salgaonkar, Nathan Lynch, Nicholas
Mc Guire, Nicholas Piggin, Nick Desaulniers, Oliver O'Halloran, Pedro
Miraglia Franco de Carvalho, Pratik Rajesh Sampat, Qian Cai, Qinglang
Miao, Ravi Bangoria, Russell Currey, Satheesh Rajendran, Scott Cheloha,
Segher Boessenkool, Srikar Dronamraju, Stan Johnson, Stephen Kitt,
Stephen Rothwell, Thiago Jung Bauermann, Tyrel Datwyler, Vaibhav Jain,
Vaidyanathan Srinivasan, Vasant Hegde, Wang Wensheng, Wolfram Sang, Yang
Yingliang, zhengbin.

* tag 'powerpc-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (228 commits)
  Revert "powerpc/pci: unmap legacy INTx interrupts when a PHB is removed"
  selftests/powerpc: Fix eeh-basic.sh exit codes
  cpufreq: powernv: Fix frame-size-overflow in powernv_cpufreq_reboot_notifier
  powerpc/time: Make get_tb() common to PPC32 and PPC64
  powerpc/time: Make get_tbl() common to PPC32 and PPC64
  powerpc/time: Remove get_tbu()
  powerpc/time: Avoid using get_tbl() and get_tbu() internally
  powerpc/time: Make mftb() common to PPC32 and PPC64
  powerpc/time: Rename mftbl() to mftb()
  powerpc/32s: Remove #ifdef CONFIG_PPC_BOOK3S_32 in head_book3s_32.S
  powerpc/32s: Rename head_32.S to head_book3s_32.S
  powerpc/32s: Setup the early hash table at all time.
  powerpc/time: Remove ifdef in get_dec() and set_dec()
  powerpc: Remove get_tb_or_rtc()
  powerpc: Remove __USE_RTC()
  powerpc: Tidy up a bit after removal of PowerPC 601.
  powerpc: Remove support for PowerPC 601
  powerpc: Remove PowerPC 601
  powerpc: Drop SYNC_601() ISYNC_601() and SYNC()
  powerpc: Remove CONFIG_PPC601_SYNC_FIX
  ...
2020-10-16 12:21:15 -07:00
Rafael J. Wysocki
f3643b5b77 Merge back cpuidle material for 5.10. 2020-09-28 16:31:25 +02:00
Lina Iyer
f49735f497 cpuidle: record state entry rejection statistics
CPUs may fail to enter the chosen idle state if there was a
pending interrupt, causing the cpuidle driver to return an error
value.

Record that and export it via sysfs along with the other idle state
statistics.

This could prove useful in understanding behavior of the governor
and the system during usecases that involve multiple CPUs.

Signed-off-by: Lina Iyer <ilina@codeaurora.org>
[ rjw: Changelog and documentation edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-09-23 14:10:31 +02:00
Ulf Hansson
bd80527457 cpuidle: Drop misleading comments about RCU usage
The commit 1098582a0f ("sched,idle,rcu: Push rcu_idle deeper into the
idle path"), moved the calls rcu_idle_enter|exit() into the cpuidle core.

However, it forgot to remove a couple of comments in enter_s2idle_proper()
about why RCU_NONIDLE earlier was needed. So, let's drop them as they have
become a bit misleading.

Fixes: 1098582a0f ("sched,idle,rcu: Push rcu_idle deeper into the idle path")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-09-22 19:32:03 +02:00
Ulf Hansson
70c179b498 cpuidle: psci: Allow PM domain to be initialized even if no OSI mode
If the PSCI OSI mode isn't supported or fails to be enabled, the PM domain
topology with the genpd providers isn't initialized. This is perfectly fine
from cpuidle-psci point of view.

However, since the PM domain topology in the DTS files is a description of
the HW, no matter of whether the PSCI OSI mode is supported or not, other
consumers besides the CPUs may rely on it.

Therefore, let's always allow the initialization of the PM domain topology
to succeed, independently of whether the PSCI OSI mode is supported.
Consequentially we need to track if we succeed to enable the OSI mode, as
to know when a domain idlestate can be selected.

Note that, CPU devices are still not being attached to the PM domain
topology, unless the PSCI OSI mode is supported.

Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-09-22 17:50:32 +02:00
Ulf Hansson
1094201904 firmware: psci: Extend psci_set_osi_mode() to allow reset to PC mode
The current user (cpuidle-psci) of psci_set_osi_mode() only needs to enable
the PSCI OSI mode. Although, as subsequent changes shows, there is a need
to be able to reset back into the PSCI PC mode.

Therefore, let's extend psci_set_osi_mode() to take a bool as in-parameter,
to let the user indicate whether to enable OSI or to switch back to PC
mode.

Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-09-22 17:50:32 +02:00
Dmitry Osipenko
1170433e66 cpuidle: tegra: Correctly handle result of arm_cpuidle_simple_enter()
The enter() callback of CPUIDLE drivers returns index of the entered idle
state on success or a negative value on failure. The negative value could
any negative value, i.e. it doesn't necessarily needs to be a error code.
That's because CPUIDLE core only cares about the fact of failure and not
about the reason of the enter() failure.

Like every other enter() callback, the arm_cpuidle_simple_enter() returns
the entered idle-index on success. Unlike some of other drivers, it never
fails. It happened that TEGRA_C1=index=err=0 in the code of cpuidle-tegra
driver, and thus, there is no problem for the cpuidle-tegra driver created
by the typo in the code which assumes that the arm_cpuidle_simple_enter()
returns a error code.

The arm_cpuidle_simple_enter() also may return a -ENODEV error if CPU_IDLE
is disabled in a kernel's config, but all CPUIDLE drivers are disabled if
CPU_IDLE is disabled, including the cpuidle-tegra driver. So we can't ever
see the error code from arm_cpuidle_simple_enter() today.

Of course the code may get some changes in the future and then the
typo may transform into a real bug, so let's correct the typo! The
tegra_cpuidle_state_enter() is now changed to make it return the entered
idle-index on success and negative error code on fail, which puts it on
par with the arm_cpuidle_simple_enter(), making code consistent in regards
to the error handling.

This patch fixes a minor typo in the code, it doesn't fix any bugs.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-09-21 17:44:54 +02:00
Ulf Hansson
36050d8984 cpuidle: psci: Fix suspicious RCU usage
The commit eb1f00237a ("lockdep,trace: Expose tracepoints"), started to
expose us for tracepoints. This lead to the following RCU splat on an ARM64
Qcom board.

[    5.529634] WARNING: suspicious RCU usage
[    5.537307] sdhci-pltfm: SDHCI platform and OF driver helper
[    5.541092] 5.9.0-rc3 #86 Not tainted
[    5.541098] -----------------------------
[    5.541105] ../include/trace/events/lock.h:37 suspicious rcu_dereference_check() usage!
[    5.541110]
[    5.541110] other info that might help us debug this:
[    5.541110]
[    5.541116]
[    5.541116] rcu_scheduler_active = 2, debug_locks = 1
[    5.541122] RCU used illegally from extended quiescent state!
[    5.541129] no locks held by swapper/0/0.
[    5.541134]
[    5.541134] stack backtrace:
[    5.541143] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.9.0-rc3 #86
[    5.541149] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT)
[    5.541157] Call trace:
[    5.568185] sdhci_msm 7864900.sdhci: Got CD GPIO
[    5.574186]  dump_backtrace+0x0/0x1c8
[    5.574206]  show_stack+0x14/0x20
[    5.574229]  dump_stack+0xe8/0x154
[    5.574250]  lockdep_rcu_suspicious+0xd4/0xf8
[    5.574269]  lock_acquire+0x3f0/0x460
[    5.574292]  _raw_spin_lock_irqsave+0x80/0xb0
[    5.574314]  __pm_runtime_suspend+0x4c/0x188
[    5.574341]  psci_enter_domain_idle_state+0x40/0xa0
[    5.574362]  cpuidle_enter_state+0xc0/0x610
[    5.646487]  cpuidle_enter+0x38/0x50
[    5.650651]  call_cpuidle+0x18/0x40
[    5.654467]  do_idle+0x228/0x278
[    5.657678]  cpu_startup_entry+0x24/0x70
[    5.661153]  rest_init+0x1a4/0x278
[    5.665061]  arch_call_rest_init+0xc/0x14
[    5.668272]  start_kernel+0x508/0x540

Following the path in pm_runtime_put_sync_suspend() from
psci_enter_domain_idle_state(), it seems like we end up using the RCU.
Therefore, let's simply silence the splat by informing the RCU about it
with RCU_NONIDLE.

Note that, this is a temporary solution. Instead we should strive to avoid
using RCU_NONIDLE (and similar), but rather push rcu_idle_enter|exit()
further down, closer to the arch specific code. However, as the CPU PM
notifiers are also using the RCU, additional rework is needed.

Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-09-21 15:56:53 +02:00
Linus Torvalds
5a55d36f71 powerpc fixes for 5.9 #5
Opt us out of the DEBUG_VM_PGTABLE support for now as it's causing crashes.
 
 Fix a long standing bug in our DMA mask handling that was hidden until recently,
 and which caused problems with some drivers.
 
 Fix a boot failure on systems with large amounts of RAM, and no hugepage support
 and using Radix MMU, only seen in the lab.
 
 A few other minor fixes.
 
 Thanks to:
   Alexey Kardashevskiy, Aneesh Kumar K.V, Gautham R. Shenoy, Hari Bathini, Ira
   Weiny, Nick Desaulniers, Shirisha Ganta, Vaibhav Jain, Vaidyanathan
   Srinivasan.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAl9kk4UTHG1wZUBlbGxl
 cm1hbi5pZC5hdQAKCRBR6+o8yOGlgLM5D/42Wuuq6hOpGEfE2XjBjsOxCR07SCw9
 CQ/c72jw/1tDLe0YclPVYAZc8BmT8uLo6tE2Ot+0vI+1Y06rRvC5g5uQBwp1zD/t
 MOwC0d4zf8a7WzBCcVaBv9HMHVOaKaTBwQc2R4k6NzYtARIf5m0evMPOWINioRsv
 /x4+Np8aeQd1WiVn6PBdqL8w1yRhk8LsVDvX35lFzQlgZvH09umXSGjw9K442xdE
 lr1PrV9GKd4DeudwLHPkMNs8Ul1QTxmY5vKIAklsJ5g3dBySfM7+GMrTzYOHYkWr
 aqGfGH6ojdFSQZRo7QwFhO52Kni7JN7AIoUPEBDqLb1fR10w8wesdjCs8JQMXIMc
 8Eo210EbiSsq6kG/LzqZuStLUAup3rQd20+wWua7jo8HbcZOLDH7pPGwNtJInPTr
 gwH7sALYhTzFUAO4LzqVVE+yA8wndFPHoz+QSkO6LZJKuszON2LJ0r+IEx1l9Wmr
 ClZYujK36/N+ih42xBFcBZi2lL0VKzlkn7u7NDeZQBONgoJMCoWkGDkEHnMI9zdT
 1iYcVZyY+IpJLcwxH+NP8weJKHIZbP4kvuFXR/QIpHdrDWKaTT95BvBhAK1KMYBo
 lLo81zMTzJCz2wWDg/+3sLuEzHdGr//uxcVXxjqE2vyEckeuZjiCyz0dRNEY4Sw3
 vB2p3Zl7L0J4pQ==
 =cj6B
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-5.9-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:
 "Some more powerpc fixes for 5.9:

   - Opt us out of the DEBUG_VM_PGTABLE support for now as it's causing
     crashes.

   - Fix a long standing bug in our DMA mask handling that was hidden
     until recently, and which caused problems with some drivers.

   - Fix a boot failure on systems with large amounts of RAM, and no
     hugepage support and using Radix MMU, only seen in the lab.

   - A few other minor fixes.

  Thanks to Alexey Kardashevskiy, Aneesh Kumar K.V, Gautham R. Shenoy,
  Hari Bathini, Ira Weiny, Nick Desaulniers, Shirisha Ganta, Vaibhav
  Jain, and Vaidyanathan Srinivasan"

* tag 'powerpc-5.9-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/papr_scm: Limit the readability of 'perf_stats' sysfs attribute
  cpuidle: pseries: Fix CEDE latency conversion from tb to us
  powerpc/dma: Fix dma_map_ops::get_required_mask
  Revert "powerpc/build: vdso linker warning for orphan sections"
  powerpc/mm: Remove DEBUG_VM_PGTABLE support on powerpc
  selftests/powerpc: Skip PROT_SAO test in guests/LPARS
  powerpc/book3s64/radix: Fix boot failure with large amount of guest memory
2020-09-18 11:48:25 -07:00
Peter Zijlstra
8747f2022f cpuidle: Allow cpuidle drivers to take over RCU-idle
Some drivers have to do significant work, some of which relies on RCU
still being active. Instead of using RCU_NONIDLE in the drivers and
flipping RCU back on, allow drivers to take over RCU-idle duty.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-09-16 19:36:26 +02:00
Nicholas Piggin
ffd2961bb4 powerpc/powernv/idle: add a basic stop 0-3 driver for POWER10
This driver does not restore stop > 3 state, so it limits itself
to states which do not lose full state or TB.

The POWER10 SPRs are sufficiently different from P9 that it seems
easier to split out the P10 code. The POWER10 deep sleep code
(e.g., the BHRB restore) has been taken out, but it can be re-added
when stop > 3 support is added.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Pratik Rajesh Sampat<psampat@linux.ibm.com>
Tested-by: Vaidyanathan Srinivasan <svaidy@linux.ibm.com>
Reviewed-by: Pratik Rajesh Sampat<psampat@linux.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200819094700.493399-1-npiggin@gmail.com
2020-09-15 22:13:38 +10:00
Gautham R. Shenoy
1d3ee7df00 cpuidle: pseries: Fix CEDE latency conversion from tb to us
Commit d947fb4c96 ("cpuidle: pseries: Fixup exit latency for
CEDE(0)") sets the exit latency of CEDE(0) based on the latency values
of the Extended CEDE states advertised by the platform. The values
advertised by the platform are in timebase ticks. However the cpuidle
framework requires the latency values in microseconds.

If the tb-ticks value advertised by the platform correspond to a value
smaller than 1us, during the conversion from tb-ticks to microseconds,
in the current code, the result becomes zero. This is incorrect as it
puts a CEDE state on par with the snooze state.

This patch fixes this by rounding up the result obtained while
converting the latency value from tb-ticks to microseconds. It also
prints a warning in case we discover an extended-cede state with
wakeup latency to be 0. In such a case, ensure that CEDE(0) has a
non-zero wakeup latency.

Fixes: d947fb4c96 ("cpuidle: pseries: Fixup exit latency for CEDE(0)")
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Reviewed-by: Vaidyanathan Srinivasan <svaidy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1599125247-28488-1-git-send-email-ego@linux.vnet.ibm.com
2020-09-08 17:14:42 +10:00
Peter Zijlstra
bf9282dc26 cpuidle: Make CPUIDLE_FLAG_TLB_FLUSHED generic
This allows moving the leave_mm() call into generic code before
rcu_idle_enter(). Gets rid of more trace_*_rcuidle() users.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Marco Elver <elver@google.com>
Link: https://lkml.kernel.org/r/20200821085348.369441600@infradead.org
2020-08-26 12:41:53 +02:00
Peter Zijlstra
1098582a0f sched,idle,rcu: Push rcu_idle deeper into the idle path
Lots of things take locks, due to a wee bug, rcu_lockdep didn't notice
that the locking tracepoints were using RCU.

Push rcu_idle_{enter,exit}() as deep as possible into the idle paths,
this also resolves a lot of _rcuidle()/RCU_NONIDLE() usage.

Specifically, sched_clock_idle_wakeup_event() will use ktime which
will use seqlocks which will tickle lockdep, and
stop_critical_timings() uses lock.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Marco Elver <elver@google.com>
Link: https://lkml.kernel.org/r/20200821085348.310943801@infradead.org
2020-08-26 12:41:53 +02:00
Peter Zijlstra
49d9c59363 cpuidle: Fixup IRQ state
Match the pattern elsewhere in this file.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Marco Elver <elver@google.com>
Link: https://lkml.kernel.org/r/20200821085348.251340558@infradead.org
2020-08-26 12:41:53 +02:00
Linus Torvalds
25d8d4eeca powerpc updates for 5.9
- Add support for (optionally) using queued spinlocks & rwlocks.
 
  - Support for a new faster system call ABI using the scv instruction on Power9
    or later.
 
  - Drop support for the PROT_SAO mmap/mprotect flag as it will be unsupported on
    Power10 and future processors, leaving us with no way to implement the
    functionality it requests. This risks breaking userspace, though we believe
    it is unused in practice.
 
  - A bug fix for, and then the removal of, our custom stack expansion checking.
    We now allow stack expansion up to the rlimit, like other architectures.
 
  - Remove the remnants of our (previously disabled) topology update code, which
    tried to react to NUMA layout changes on virtualised systems, but was prone
    to crashes and other problems.
 
  - Add PMU support for Power10 CPUs.
 
  - A change to our signal trampoline so that we don't unbalance the link stack
    (branch return predictor) in the signal delivery path.
 
  - Lots of other cleanups, refactorings, smaller features and so on as usual.
 
 Thanks to:
   Abhishek Goel, Alastair D'Silva, Alexander A. Klimov, Alexey Kardashevskiy,
   Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Anton
   Blanchard, Arnd Bergmann, Athira Rajeev, Balamuruhan S, Bharata B Rao, Bill
   Wendling, Bin Meng, Cédric Le Goater, Chris Packham, Christophe Leroy,
   Christoph Hellwig, Daniel Axtens, Dan Williams, David Lamparter, Desnes A.
   Nunes do Rosario, Erhard F., Finn Thain, Frederic Barrat, Ganesh Goudar,
   Gautham R. Shenoy, Geoff Levand, Greg Kurz, Gustavo A. R. Silva, Hari Bathini,
   Harish, Imre Kaloz, Joel Stanley, Joe Perches, John Crispin, Jordan Niethe,
   Kajol Jain, Kamalesh Babulal, Kees Cook, Laurent Dufour, Leonardo Bras, Li
   RongQing, Madhavan Srinivasan, Mahesh Salgaonkar, Mark Cave-Ayland, Michal
   Suchanek, Milton Miller, Mimi Zohar, Murilo Opsfelder Araujo, Nathan
   Chancellor, Nathan Lynch, Naveen N. Rao, Nayna Jain, Nicholas Piggin, Oliver
   O'Halloran, Palmer Dabbelt, Pedro Miraglia Franco de Carvalho, Philippe
   Bergheaud, Pingfan Liu, Pratik Rajesh Sampat, Qian Cai, Qinglang Miao, Randy
   Dunlap, Ravi Bangoria, Sachin Sant, Sam Bobroff, Sandipan Das, Santosh
   Sivaraj, Satheesh Rajendran, Shirisha Ganta, Sourabh Jain, Srikar Dronamraju,
   Stan Johnson, Stephen Rothwell, Thadeu Lima de Souza Cascardo, Thiago Jung
   Bauermann, Tom Lane, Vaibhav Jain, Vladis Dronov, Wei Yongjun, Wen Xiong,
   YueHaibing.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAl8tOxATHG1wZUBlbGxl
 cm1hbi5pZC5hdQAKCRBR6+o8yOGlgDQfEAClXHWf6hnxB84bEu39D51NkVotL1IG
 BRWFvyix+xHuUkHIouBPAAMl6ngY5X6wkYd+Z+CY9zHNtdSDoVlJE30YXdMQA/dE
 L/rYxR1884yGR/uU/3wusboO68ReXwcKQPmKOymUfh0zH7ujyJsSWLpXFK1YDC5d
 2TVVTi0Q+P5ucMHDh0L+AHirIxZvtZSp43+J7xLtywsj+XAxJWCTGo5WCJbdgbCA
 Qbv3aOkVyUa3EgsbdM/STPpv82ebqT+PHxeSIO4Jw6ZODtKRH0R5YsWCApuY9eZ+
 ebY9RLmgv9ZAhJqB2fv9A5NDcMoGpZNmjM7HrWpXwULKQpkBGHCzJ9FcSdHVMOx8
 nbVMFjt4uzLwV1w8lFYslQ2tNH/uH2o9BlryV1RLpiiKokDAJO/NOsWN9y0u/I4J
 EmAM5DSX2LgVvvas96IlGK8KX4xkOkf8FLX/H5UDvvAfloH8J4CZXk/CWCab/nqY
 KEHPnMmYvQZ1w9SzyZg9sO/1p6Bl1Gmm75Jv2F1lBiRW/42VcGBI/qLsJ4lC59Fc
 KbwufYNYYG38wbxDLW1HAPJhRonxIcaZj3EEqk7aTiLZ55nNbu8e2k32CpNXTGqt
 npOhzJHimcq7L6+878ZW+xpbZwogIEUdRSsmwb6aT8za3ShnYwSA2Q3LYxh9xyGH
 j3GifvPq6Efp3Q==
 =QMY1
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:

 - Add support for (optionally) using queued spinlocks & rwlocks.

 - Support for a new faster system call ABI using the scv instruction on
   Power9 or later.

 - Drop support for the PROT_SAO mmap/mprotect flag as it will be
   unsupported on Power10 and future processors, leaving us with no way
   to implement the functionality it requests. This risks breaking
   userspace, though we believe it is unused in practice.

 - A bug fix for, and then the removal of, our custom stack expansion
   checking. We now allow stack expansion up to the rlimit, like other
   architectures.

 - Remove the remnants of our (previously disabled) topology update
   code, which tried to react to NUMA layout changes on virtualised
   systems, but was prone to crashes and other problems.

 - Add PMU support for Power10 CPUs.

 - A change to our signal trampoline so that we don't unbalance the link
   stack (branch return predictor) in the signal delivery path.

 - Lots of other cleanups, refactorings, smaller features and so on as
   usual.

Thanks to: Abhishek Goel, Alastair D'Silva, Alexander A. Klimov, Alexey
Kardashevskiy, Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anju
T Sudhakar, Anton Blanchard, Arnd Bergmann, Athira Rajeev, Balamuruhan
S, Bharata B Rao, Bill Wendling, Bin Meng, Cédric Le Goater, Chris
Packham, Christophe Leroy, Christoph Hellwig, Daniel Axtens, Dan
Williams, David Lamparter, Desnes A. Nunes do Rosario, Erhard F., Finn
Thain, Frederic Barrat, Ganesh Goudar, Gautham R. Shenoy, Geoff Levand,
Greg Kurz, Gustavo A. R. Silva, Hari Bathini, Harish, Imre Kaloz, Joel
Stanley, Joe Perches, John Crispin, Jordan Niethe, Kajol Jain, Kamalesh
Babulal, Kees Cook, Laurent Dufour, Leonardo Bras, Li RongQing, Madhavan
Srinivasan, Mahesh Salgaonkar, Mark Cave-Ayland, Michal Suchanek, Milton
Miller, Mimi Zohar, Murilo Opsfelder Araujo, Nathan Chancellor, Nathan
Lynch, Naveen N. Rao, Nayna Jain, Nicholas Piggin, Oliver O'Halloran,
Palmer Dabbelt, Pedro Miraglia Franco de Carvalho, Philippe Bergheaud,
Pingfan Liu, Pratik Rajesh Sampat, Qian Cai, Qinglang Miao, Randy
Dunlap, Ravi Bangoria, Sachin Sant, Sam Bobroff, Sandipan Das, Santosh
Sivaraj, Satheesh Rajendran, Shirisha Ganta, Sourabh Jain, Srikar
Dronamraju, Stan Johnson, Stephen Rothwell, Thadeu Lima de Souza
Cascardo, Thiago Jung Bauermann, Tom Lane, Vaibhav Jain, Vladis Dronov,
Wei Yongjun, Wen Xiong, YueHaibing.

* tag 'powerpc-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (337 commits)
  selftests/powerpc: Fix pkey syscall redefinitions
  powerpc: Fix circular dependency between percpu.h and mmu.h
  powerpc/powernv/sriov: Fix use of uninitialised variable
  selftests/powerpc: Skip vmx/vsx/tar/etc tests on older CPUs
  powerpc/40x: Fix assembler warning about r0
  powerpc/papr_scm: Add support for fetching nvdimm 'fuel-gauge' metric
  powerpc/papr_scm: Fetch nvdimm performance stats from PHYP
  cpuidle: pseries: Fixup exit latency for CEDE(0)
  cpuidle: pseries: Add function to parse extended CEDE records
  cpuidle: pseries: Set the latency-hint before entering CEDE
  selftests/powerpc: Fix online CPU selection
  powerpc/perf: Consolidate perf_callchain_user_[64|32]()
  powerpc/pseries/hotplug-cpu: Remove double free in error path
  powerpc/pseries/mobility: Add pr_debug() for device tree changes
  powerpc/pseries/mobility: Set pr_fmt()
  powerpc/cacheinfo: Warn if cache object chain becomes unordered
  powerpc/cacheinfo: Improve diagnostics about malformed cache lists
  powerpc/cacheinfo: Use name@unit instead of full DT path in debug messages
  powerpc/cacheinfo: Set pr_fmt()
  powerpc: fix function annotations to avoid section mismatch warnings with gcc-10
  ...
2020-08-07 10:33:50 -07:00
Gautham R. Shenoy
d947fb4c96 cpuidle: pseries: Fixup exit latency for CEDE(0)
We are currently assuming that CEDE(0) has exit latency 10us, since
there is no way for us to query from the platform. However, if the
wakeup latency of an Extended CEDE state is smaller than 10us, then we
can be sure that the exit latency of CEDE(0) cannot be more than that.

In this patch, we fix the exit latency of CEDE(0) if we discover an
Extended CEDE state with wakeup latency smaller than 10us.

Benchmark results:

On POWER8, this patch does not have any impact since the advertized
latency of Extended CEDE (1) is 30us which is higher than the default
latency of CEDE (0) which is 10us.

On POWER9 we see improvement the single-threaded performance of
ebizzy, and no regression in the wakeup latency or the number of
context-switches.

ebizzy:
2 ebizzy threads bound to the same big-core. 25% improvement in the
avg records/s with patch.

  x without_patch
  * with_patch
      N           Min           Max        Median           Avg        Stddev
  x  10       2491089       5834307       5398375       4244335     1596244.9
  *  10       2893813       5834474       5832448     5327281.3     1055941.4

context_switch2:
There is no major regression observed with this patch as seen from the
context_switch2 benchmark.

context_switch2 across CPU0 CPU1 (Both belong to same big-core, but
different small cores). We observe a minor 0.14% regression in the
number of context-switches (higher is better).

  x without_patch
  * with_patch
      N           Min           Max        Median           Avg        Stddev
  x 500        348872        362236        354712     354745.69      2711.827
  * 500        349422        361452        353942      354215.4     2576.9258

  Difference at 99.0% confidence
    -530.288 +/- 430.963
    -0.149484% +/- 0.121485%
    (Student's t, pooled s = 2645.24)

context_switch2 across CPU0 CPU8 (Different big-cores). We observe a
0.37% improvement in the number of context-switches (higher is
better).

  x without_patch
  * with_patch
      N           Min           Max        Median           Avg        Stddev
  x 500        287956        294940        288896     288977.23     646.59295
  * 500        288300        294646        289582     290064.76     1161.9992

  Difference at 99.0% confidence
    1087.53 +/- 153.194
    0.376337% +/- 0.0530125%
    (Student's t, pooled s = 940.299)

schbench:
No major difference could be seen until the 99.9th percentile.

Without-patch:
  Latency percentiles (usec)
        50.0th: 29
        75.0th: 39
        90.0th: 49
        95.0th: 59
        *99.0th: 13104
        99.5th: 14672
        99.9th: 15824
        min=0, max=17993

With-patch:
  Latency percentiles (usec)
        50.0th: 29
        75.0th: 40
        90.0th: 50
        95.0th: 61
        *99.0th: 13648
        99.5th: 14768
        99.9th: 15664
        min=0, max=29812

Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
[mpe: Minor formatting]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1596087177-30329-4-git-send-email-ego@linux.vnet.ibm.com
2020-07-30 22:53:50 +10:00
Gautham R. Shenoy
054e44ba99 cpuidle: pseries: Add function to parse extended CEDE records
Currently we use CEDE with latency-hint 0 as the only other idle state
on a dedicated LPAR apart from the polling "snooze" state.

The platform might support additional extended CEDE idle states, which
can be discovered through the "ibm,get-system-parameter" rtas-call
made with CEDE_LATENCY_TOKEN.

This patch adds a function to obtain information about the extended
CEDE idle states from the platform and parse the contents to populate
an array of extended CEDE states. These idle states thus discovered
will be added to the cpuidle framework in the next patch.

dmesg on a POWER8 and POWER9 LPAR, demonstrating the output of parsing
the extended CEDE latency parameters are as follows

POWER8
[   10.093279] xcede : xcede_record_size = 10
[   10.093285] xcede : Record 0 : hint = 1, latency = 0x3c00 tb ticks, Wake-on-irq = 1
[   10.093291] xcede : Record 1 : hint = 2, latency = 0x4e2000 tb ticks, Wake-on-irq = 0
[   10.093297] cpuidle : Skipping the 2 Extended CEDE idle states

POWER9
[    5.913180] xcede : xcede_record_size = 10
[    5.913183] xcede : Record 0 : hint = 1, latency = 0x400 tb ticks, Wake-on-irq = 1
[    5.913188] xcede : Record 1 : hint = 2, latency = 0x3e8000 tb ticks, Wake-on-irq = 0
[    5.913193] cpuidle : Skipping the 2 Extended CEDE idle states

Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
[mpe: Make space for 16 records, drop memset, minor cleanup & formatting]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1596087177-30329-3-git-send-email-ego@linux.vnet.ibm.com
2020-07-30 22:53:50 +10:00
Gautham R. Shenoy
3af0ada7dd cpuidle: pseries: Set the latency-hint before entering CEDE
As per the PAPR, each H_CEDE call is associated with a latency-hint to
be passed in the VPA field "cede_latency_hint". The CEDE states that
we were implicitly entering so far is CEDE with latency-hint = 0.

This patch explicitly sets the latency hint corresponding to the CEDE
state that we are currently entering. While at it, we save the
previous hint, to be restored once we wakeup from CEDE. This will be
required in the future when we expose extended-cede states through the
cpuidle framework, where each of them will have a different
cede-latency hint.

Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
[mpe: Make cede_latency_hint static]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1596087177-30329-2-git-send-email-ego@linux.vnet.ibm.com
2020-07-30 22:53:50 +10:00
Neal Liu
efe9711214 cpuidle: change enter_s2idle() prototype
Control Flow Integrity(CFI) is a security mechanism that disallows
changes to the original control flow graph of a compiled binary,
making it significantly harder to perform such attacks.

init_state_node() assign same function callback to different
function pointer declarations.

static int init_state_node(struct cpuidle_state *idle_state,
                           const struct of_device_id *matches,
                           struct device_node *state_node) { ...
        idle_state->enter = match_id->data; ...
        idle_state->enter_s2idle = match_id->data; }

Function declarations:

struct cpuidle_state { ...
        int (*enter) (struct cpuidle_device *dev,
                      struct cpuidle_driver *drv,
                      int index);

        void (*enter_s2idle) (struct cpuidle_device *dev,
                              struct cpuidle_driver *drv,
                              int index); };

In this case, either enter() or enter_s2idle() would cause CFI check
failed since they use same callee.

Align function prototype of enter() since it needs return value for
some use cases. The return value of enter_s2idle() is no
need currently.

Signed-off-by: Neal Liu <neal.liu@mediatek.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-29 18:38:30 +02:00
Ulf Hansson
81f94ddfec cpuidle: psci: Prevent domain idlestates until consumers are ready
Depending on the SoC/platform, additional devices may be part of the PSCI
PM domain topology. This is the case with 'qcom,rpmh-rsc' device, for
example, even if this is not yet visible in the corresponding DTS-files.

Without going into too much details, a device like the 'qcom,rpmh-rsc' may
have HW constraints that needs to be obeyed to, before a domain idlestate
can be picked.

Therefore, let's implement the ->sync_state() callback to receive a
notification when all consumers of the PSCI PM domain providers have been
attached/probed to it. In this way, we can make sure all constraints from
all relevant devices, are taken into account before allowing a domain
idlestate to be picked.

Acked-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-29 18:38:30 +02:00
Ulf Hansson
ee7c34caac cpuidle: psci: Convert PM domain to platform driver
To enable support for deferred probing and to allow implementation of the
->sync_state() callback from subsequent changes, let's convert into a
platform driver.

Reviewed-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-29 18:38:30 +02:00
Ulf Hansson
166bf83529 cpuidle: psci: Fix error path via converting to a platform driver
The current error paths for the cpuidle-psci driver, may leak memory or
possibly leave CPU devices attached to their PM domains. These are quite
harmless issues, but still deserves to be taken care of.

Although, rather than fixing them by keeping track of allocations that
needs to be freed, which tends to become a bit messy, let's convert into a
platform driver. In this way, it gets easier to fix the memory leaks as we
can rely on the devm_* functions.

Moreover, converting to a platform driver also enables support for deferred
probe, which subsequent changes takes benefit from.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-29 18:38:30 +02:00
Ulf Hansson
4b072cd6ac cpuidle: psci: Fail cpuidle registration if set OSI mode failed
Currently we allow the cpuidle driver registration to succeed, even if we
failed to enable the OSI mode when the hierarchical DT layout is used. This
means running in a degraded mode, by using the available idle states per
CPU, while also preventing the domain idle states.

Moving forward, this behaviour looks quite questionable to maintain, as
complexity seems to grow around it, especially when trying to add support
for deferred probe, for example.

Therefore, let's make the cpuidle driver registration to fail in this
situation, thus relying on the default architectural cpuidle backend for
WFI to be used.

Reviewed-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-29 18:38:30 +02:00
Ulf Hansson
0317561912 cpuidle: psci: Split into two separate build objects
The combined build object for the PSCI cpuidle driver and the PSCI PM
domain, is a bit messy. Therefore let's split it up by adding a new Kconfig
ARM_PSCI_CPUIDLE_DOMAIN and convert into two separate objects.

Reviewed-by: Lina Iyer <ilina@codeaurora.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-29 18:38:30 +02:00
Wei Yongjun
92fe8483b1 cpuidle/pseries: Make symbol 'pseries_idle_driver' static
The sparse tool complains as follows:

drivers/cpuidle/cpuidle-pseries.c:25:23: warning:
 symbol 'pseries_idle_driver' was not declared. Should it be static?

'pseries_idle_driver' is not used outside of this file, so marks
it static.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200714142424.66648-1-weiyongjun1@huawei.com
2020-07-16 13:12:45 +10:00
Abhishek Goel
c339f9be30 cpuidle/powernv : Remove dead code block
Commit 1961acad2f removes usage of
function "validate_dt_prop_sizes". This patch removes this unused
function.

Signed-off-by: Abhishek Goel <huntbag@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200706053258.121475-1-huntbag@linux.vnet.ibm.com
2020-07-15 11:07:20 +10:00
Rafael J. Wysocki
10e8b11eb3 cpuidle: Rearrange s2idle-specific idle state entry code
Implement call_cpuidle_s2idle() in analogy with call_cpuidle()
for the s2idle-specific idle state entry and invoke it from
cpuidle_idle_call() to make the s2idle-specific idle entry code
path look more similar to the "regular" idle entry one.

No intentional functional impact.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Chen Yu <yu.c.chen@intel.com>
2020-06-25 13:52:53 +02:00
Chen Yu
81e6737518 PM: s2idle: Clear _TIF_POLLING_NRFLAG before suspend to idle
Suspend to idle was found to not work on Goldmont CPU recently.

The issue happens due to:

 1. On Goldmont the CPU in idle can only be woken up via IPIs,
    not POLLING mode, due to commit 08e237fa56 ("x86/cpu: Add
    workaround for MONITOR instruction erratum on Goldmont based
    CPUs")

 2. When the CPU is entering suspend to idle process, the
    _TIF_POLLING_NRFLAG remains on, because cpuidle_enter_s2idle()
    doesn't match call_cpuidle() exactly.

 3. Commit b2a02fc43a ("smp: Optimize send_call_function_single_ipi()")
    makes use of _TIF_POLLING_NRFLAG to avoid sending IPIs to idle
    CPUs.

 4. As a result, some IPIs related functions might not work
    well during suspend to idle on Goldmont. For example, one
    suspected victim:

    tick_unfreeze() -> timekeeping_resume() -> hrtimers_resume()
    -> clock_was_set() -> on_each_cpu() might wait forever,
    because the IPIs will not be sent to the CPUs which are
    sleeping with _TIF_POLLING_NRFLAG set, and Goldmont CPU
    could not be woken up by only setting _TIF_NEED_RESCHED
    on the monitor address.

To avoid that, clear the _TIF_POLLING_NRFLAG flag before invoking
enter_s2idle_proper() in cpuidle_enter_s2idle() in analogy with the
call_cpuidle() code flow.

Fixes: b2a02fc43a ("smp: Optimize send_call_function_single_ipi()")
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Suggested-by: Rafael J. Wysocki <rafael@kernel.org>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
[ rjw: Subject / changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-06-23 17:06:55 +02:00
Linus Torvalds
df2fbf5bfa - Add the hwmon support on the i.MX SC (Anson Huang)
- Thermal framework cleanups (self-encapsulation, pointless stubs,
   private structures) (Daniel Lezcano)
 
 - Use the PM QoS frequency changes for the devfreq cooling device (Matthias
   Kaehlcke)
 
 - Remove duplicate error messages from platform_get_irq() error handling
   (Markus Elfring)
 
 - Add support for the bandgap sensors (Keerthy)
 
 - Statically initialize .get_mode/.set_mode ops (Andrzej Pietrasiewicz)
 
 - Add Renesas R-Car maintainer entry (Niklas Söderlund)
 
 - Fix error checking after calling ti_bandgap_get_sensor_data() for the TI SoC
   thermal (Sudip Mukherjee)
 
 - Add latency constraint for the idle injection, the DT binding and the change
   the registering function (Daniel Lezcano)
 
 - Convert the thermal framework binding to the Yaml schema (Amit Kucheria)
 
 - Replace zero-length array with flexible-array on i.MX 8MM (Gustavo A. R. Silva)
 
 - Thermal framework cleanups (alphabetic order for heads, replace module.h by
   export.h, make file naming consistent) (Amit Kucheria)
 
 - Merge tsens-common into the tsens driver (Amit Kucheria)
 
 - Fix platform dependency for the Qoriq driver (Geert Uytterhoeven)
 
 - Clean up the rcar_thermal_update_temp() function in the rcar thermal driver
   (Niklas Söderlund)
 
 - Fix the TMSAR register for the TMUv2 on the Qoriq platform (Yuantian Tang)
 
 - Export GDDV, OEM vendor variables, and don't require IDSP for the int340x
   thermal driver - trivial conflicts fixed (Matthew Garrett)
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAl7jra8ACgkQqDIjiipP
 6E+ugAgApBF6FsHoonWIvoSrzBrrbU2oqhEJA42Mx+iY/UnXi01I79vZ/8WpZt7M
 D1J01Kf0PUhRbywoKaoCX3Oh9ZO9PKq4N9ZC8yqdoD6GLl+rC9Wmr7Ui+c80klcv
 M9rYhpPYfNXTFj0saSbbFWNNhP4TvhzGsNj8foYVQDKyhjbSmNE5ipZlbmP23jlr
 O53SmJAwS5zxLOd8QA5nfSWP9FYYMuCR2AHj8BUCmxiAjXZLPNB/Hz2RRBr7q0MF
 zRo/4HJ04mSQYp0kluP/EBhz9g2wM/htIPyWRveB/ByKEYt3UNKjB++PJmPbu5UG
 dS3aXZhRfaPqpdsWrMB9fY7ll+oyfw==
 =T+RI
 -----END PGP SIGNATURE-----

Merge tag 'thermal-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux

Pull thermal updates from Daniel Lezcano:

 - Add the hwmon support on the i.MX SC (Anson Huang)

 - Thermal framework cleanups (self-encapsulation, pointless stubs,
   private structures) (Daniel Lezcano)

 - Use the PM QoS frequency changes for the devfreq cooling device
   (Matthias Kaehlcke)

 - Remove duplicate error messages from platform_get_irq() error
   handling (Markus Elfring)

 - Add support for the bandgap sensors (Keerthy)

 - Statically initialize .get_mode/.set_mode ops (Andrzej Pietrasiewicz)

 - Add Renesas R-Car maintainer entry (Niklas Söderlund)

 - Fix error checking after calling ti_bandgap_get_sensor_data() for the
   TI SoC thermal (Sudip Mukherjee)

 - Add latency constraint for the idle injection, the DT binding and the
   change the registering function (Daniel Lezcano)

 - Convert the thermal framework binding to the Yaml schema (Amit
   Kucheria)

 - Replace zero-length array with flexible-array on i.MX 8MM (Gustavo A.
   R. Silva)

 - Thermal framework cleanups (alphabetic order for heads, replace
   module.h by export.h, make file naming consistent) (Amit Kucheria)

 - Merge tsens-common into the tsens driver (Amit Kucheria)

 - Fix platform dependency for the Qoriq driver (Geert Uytterhoeven)

 - Clean up the rcar_thermal_update_temp() function in the rcar thermal
   driver (Niklas Söderlund)

 - Fix the TMSAR register for the TMUv2 on the Qoriq platform (Yuantian
   Tang)

 - Export GDDV, OEM vendor variables, and don't require IDSP for the
   int340x thermal driver - trivial conflicts fixed (Matthew Garrett)

* tag 'thermal-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (48 commits)
  thermal/int340x_thermal: Don't require IDSP to exist
  thermal/int340x_thermal: Export OEM vendor variables
  thermal/int340x_thermal: Export GDDV
  thermal: qoriq: Update the settings for TMUv2
  thermal: rcar_thermal: Clean up rcar_thermal_update_temp()
  thermal: qoriq: Add platform dependencies
  drivers: thermal: tsens: Merge tsens-common.c into tsens.c
  thermal/of: Rename of-thermal.c
  thermal/governors: Prefix all source files with gov_
  thermal/drivers/user_space: Sort headers alphabetically
  thermal/drivers/of-thermal: Sort headers alphabetically
  thermal/drivers/cpufreq_cooling: Replace module.h with export.h
  thermal/drivers/cpufreq_cooling: Sort headers alphabetically
  thermal/drivers/clock_cooling: Include export.h
  thermal/drivers/clock_cooling: Sort headers alphabetically
  thermal/drivers/thermal_hwmon: Include export.h
  thermal/drivers/thermal_hwmon: Sort headers alphabetically
  thermal/drivers/thermal_helpers: Include export.h
  thermal/drivers/thermal_helpers: Sort headers alphabetically
  thermal/core: Replace module.h with export.h
  ...
2020-06-12 14:10:21 -07:00
Linus Torvalds
7ae77150d9 powerpc updates for 5.8
- Support for userspace to send requests directly to the on-chip GZIP
    accelerator on Power9.
 
  - Rework of our lockless page table walking (__find_linux_pte()) to make it
    safe against parallel page table manipulations without relying on an IPI for
    serialisation.
 
  - A series of fixes & enhancements to make our machine check handling more
    robust.
 
  - Lots of plumbing to add support for "prefixed" (64-bit) instructions on
    Power10.
 
  - Support for using huge pages for the linear mapping on 8xx (32-bit).
 
  - Remove obsolete Xilinx PPC405/PPC440 support, and an associated sound driver.
 
  - Removal of some obsolete 40x platforms and associated cruft.
 
  - Initial support for booting on Power10.
 
  - Lots of other small features, cleanups & fixes.
 
 Thanks to:
   Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan, Andrey Abramov,
   Aneesh Kumar K.V, Balamuruhan S, Bharata B Rao, Bulent Abali, Cédric Le
   Goater, Chen Zhou, Christian Zigotzky, Christophe JAILLET, Christophe Leroy,
   Dmitry Torokhov, Emmanuel Nicolet, Erhard F., Gautham R. Shenoy, Geoff Levand,
   George Spelvin, Greg Kurz, Gustavo A. R. Silva, Gustavo Walbon, Haren Myneni,
   Hari Bathini, Joel Stanley, Jordan Niethe, Kajol Jain, Kees Cook, Leonardo
   Bras, Madhavan Srinivasan., Mahesh Salgaonkar, Markus Elfring, Michael
   Neuling, Michal Simek, Nathan Chancellor, Nathan Lynch, Naveen N. Rao,
   Nicholas Piggin, Oliver O'Halloran, Paul Mackerras, Pingfan Liu, Qian Cai, Ram
   Pai, Raphael Moreira Zinsly, Ravi Bangoria, Sam Bobroff, Sandipan Das, Segher
   Boessenkool, Stephen Rothwell, Sukadev Bhattiprolu, Tyrel Datwyler, Wolfram
   Sang, Xiongfeng Wang.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAl7aYZ8THG1wZUBlbGxl
 cm1hbi5pZC5hdQAKCRBR6+o8yOGlgPiKD/9zNCuZLFMAFrIdbm0HlYA2RGYZFT75
 GUHsqYyei1pxA7PgM3KwJiXELVODsBv0eQbgNh1tbecKrxPRegN/cywd1KLjPZ7I
 v5/qweQP8MvR0RhzjbhvUcO0jq/f8u2LbJr5mUfVzjU6tAvrvcWo3oZqDElsekCS
 kgyOH3r1vZ2PLTMiGFhb0gWi2iqc+6BHU1AFCGPCMjB1Vu5d5+54VvZ/6lllGsOF
 yg9CBXmmVvQ+Bn6tH4zdEB78FYxnAIwBqlbmL79i5ca+HQJ0Sw6HuPRy9XYq35p6
 2EiXS4Wrgp7i7+1TN3HO362u5Onb8TSyQU7NS6yCFPoJ6JQxcJMBIw6mHhnXOPuZ
 CrjgcdwUMjx8uDoKmX1Epbfuex2w+AysW+4yBHPFiSgl3klKC3D0wi95mR485w2F
 rN8uzJtrDeFKcYZJG7IoB/cgFCCPKGf9HaXr8q0S/jBKMffx91ul3cfzlfdIXOCw
 FDNw/+ZX7UD6ddFEG12ZTO+vdL8yf1uCRT/DIZwUiDMIA0+M6F4nc7j3lfyZfoO1
 65f9UlhoLxScq7VH2fKH4UtZatO9cPID2z1CmiY4UbUIPtFDepSuYClgLF+Duf4b
 rkfxhKU0+Ja1zNH5XNc+L+Bc5/W4lFiJXz02dYIjtHoUpWkc1aToOETVwzggYFNM
 G3PXIBOI0jRgRw==
 =o0WU
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:

 - Support for userspace to send requests directly to the on-chip GZIP
   accelerator on Power9.

 - Rework of our lockless page table walking (__find_linux_pte()) to
   make it safe against parallel page table manipulations without
   relying on an IPI for serialisation.

 - A series of fixes & enhancements to make our machine check handling
   more robust.

 - Lots of plumbing to add support for "prefixed" (64-bit) instructions
   on Power10.

 - Support for using huge pages for the linear mapping on 8xx (32-bit).

 - Remove obsolete Xilinx PPC405/PPC440 support, and an associated sound
   driver.

 - Removal of some obsolete 40x platforms and associated cruft.

 - Initial support for booting on Power10.

 - Lots of other small features, cleanups & fixes.

Thanks to: Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan,
Andrey Abramov, Aneesh Kumar K.V, Balamuruhan S, Bharata B Rao, Bulent
Abali, Cédric Le Goater, Chen Zhou, Christian Zigotzky, Christophe
JAILLET, Christophe Leroy, Dmitry Torokhov, Emmanuel Nicolet, Erhard F.,
Gautham R. Shenoy, Geoff Levand, George Spelvin, Greg Kurz, Gustavo A.
R. Silva, Gustavo Walbon, Haren Myneni, Hari Bathini, Joel Stanley,
Jordan Niethe, Kajol Jain, Kees Cook, Leonardo Bras, Madhavan
Srinivasan., Mahesh Salgaonkar, Markus Elfring, Michael Neuling, Michal
Simek, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin,
Oliver O'Halloran, Paul Mackerras, Pingfan Liu, Qian Cai, Ram Pai,
Raphael Moreira Zinsly, Ravi Bangoria, Sam Bobroff, Sandipan Das, Segher
Boessenkool, Stephen Rothwell, Sukadev Bhattiprolu, Tyrel Datwyler,
Wolfram Sang, Xiongfeng Wang.

* tag 'powerpc-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (299 commits)
  powerpc/pseries: Make vio and ibmebus initcalls pseries specific
  cxl: Remove dead Kconfig options
  powerpc: Add POWER10 architected mode
  powerpc/dt_cpu_ftrs: Add MMA feature
  powerpc/dt_cpu_ftrs: Enable Prefixed Instructions
  powerpc/dt_cpu_ftrs: Advertise support for ISA v3.1 if selected
  powerpc: Add support for ISA v3.1
  powerpc: Add new HWCAP bits
  powerpc/64s: Don't set FSCR bits in INIT_THREAD
  powerpc/64s: Save FSCR to init_task.thread.fscr after feature init
  powerpc/64s: Don't let DT CPU features set FSCR_DSCR
  powerpc/64s: Don't init FSCR_DSCR in __init_FSCR()
  powerpc/32s: Fix another build failure with CONFIG_PPC_KUAP_DEBUG
  powerpc/module_64: Use special stub for _mcount() with -mprofile-kernel
  powerpc/module_64: Simplify check for -mprofile-kernel ftrace relocations
  powerpc/module_64: Consolidate ftrace code
  powerpc/32: Disable KASAN with pages bigger than 16k
  powerpc/uaccess: Don't set KUEP by default on book3s/32
  powerpc/uaccess: Don't set KUAP by default on book3s/32
  powerpc/8xx: Reduce time spent in allow_user_access() and friends
  ...
2020-06-05 12:39:30 -07:00
Linus Torvalds
828f3e18e1 ARM/SoC: drivers for v5.7
These are updates to SoC specific drivers that did not have
 another subsystem maintainer tree to go through for some
 reason:
 
 - Some bus and memory drivers for the MIPS P5600 based
   Baikal-T1 SoC that is getting added through the MIPS tree.
 
 - There are new soc_device identification drivers for TI K3,
   Qualcomm MSM8939
 
 - New reset controller drivers for NXP i.MX8MP, Renesas
   RZ/G1H, and Hisilicon hi6220
 
 - The SCMI firmware interface can now work across ARM SMC/HVC
   as a transport.
 
 - Mediatek platforms now use a new driver for their "MMSYS"
   hardware block that controls clocks and some other aspects
   in behalf of the media and gpu drivers.
 
 - Some Tegra processors have improved power management
   support, including getting woken up by the PMIC and cluster
   power down during idle.
 
 - A new v4l staging driver for Tegra is added.
 
 - Cleanups and minor bugfixes for TI, NXP, Hisilicon,
   Mediatek, and Tegra.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl7XvgAACgkQmmx57+YA
 GNmj/hAAnAJ/hYehLfgCe711HUntgeRkaoTVpCt8BJNMdxsa23sn3V6k5+WYn1uG
 PtlgpefZEMHLUEEVDegR4nZXLG0Pzu1SR12KW34YPcQKkNo/+vlQ9zYUajnJ/KX6
 10zdLSIzHfk1VtXKvvQQ8xFyE+S/trGmjC57E6gfoCUT3rl1maD+ccVXUBaz9oob
 wuMxGXQAl57mio5yT1OfSk6Fev39xRE2dN1hzP7KUYhsemZajBwBBW5wVJZCsCB8
 LCGmxVkavM7BV4r2NokbBDs5rlfedBl/P/IPd9Is5a5tuGUkSsVRG9zqShxYLGM3
 S06az6POQFwXKFJoUKW0dK/Koy0D7BK+vhUBPzFv4HZ8iDCVf6Jju2MJ02GMqHPj
 OOrXaCbLYrvN/edVUWeeFywqwMbYTRwC4DxyTq5m7HxEB004xTOhs0rX5aR0u4n1
 bbsR97LguolwH9iEMzd3F3jCiKBcMecH3lAh5WcrtwlFIRrNhbWoGDoA/4TuORFS
 b11rgsTRIJ5Vc++D1HnSnx0ZZvUzyluMvygdALnSgVah6xYe6KVw9Kg/wioAJ04G
 uSTidqP3qRhsyET2HQo7CxdVfZbKfP25iKCKrdhQziztKvhF8qrUmZKloXOodRw+
 ewYSRmv8c324OYYit1X43oAdW8dntq1XbSIauaqxEb4JC7x/xRY=
 =44Jc
 -----END PGP SIGNATURE-----

Merge tag 'arm-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM/SoC driver updates from Arnd Bergmann:
 "These are updates to SoC specific drivers that did not have another
  subsystem maintainer tree to go through for some reason:

   - Some bus and memory drivers for the MIPS P5600 based Baikal-T1 SoC
     that is getting added through the MIPS tree.

   - There are new soc_device identification drivers for TI K3, Qualcomm
     MSM8939

   - New reset controller drivers for NXP i.MX8MP, Renesas RZ/G1H, and
     Hisilicon hi6220

   - The SCMI firmware interface can now work across ARM SMC/HVC as a
     transport.

   - Mediatek platforms now use a new driver for their "MMSYS" hardware
     block that controls clocks and some other aspects in behalf of the
     media and gpu drivers.

   - Some Tegra processors have improved power management support,
     including getting woken up by the PMIC and cluster power down
     during idle.

   - A new v4l staging driver for Tegra is added.

   - Cleanups and minor bugfixes for TI, NXP, Hisilicon, Mediatek, and
     Tegra"

* tag 'arm-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (155 commits)
  clk: sprd: fix compile-testing
  bus: bt1-axi: Build the driver into the kernel
  bus: bt1-apb: Build the driver into the kernel
  bus: bt1-axi: Use sysfs_streq instead of strncmp
  bus: bt1-axi: Optimize the return points in the driver
  bus: bt1-apb: Use sysfs_streq instead of strncmp
  bus: bt1-apb: Use PTR_ERR_OR_ZERO to return from request-regs method
  bus: bt1-apb: Fix show/store callback identations
  bus: bt1-apb: Include linux/io.h
  dt-bindings: memory: Add Baikal-T1 L2-cache Control Block binding
  memory: Add Baikal-T1 L2-cache Control Block driver
  bus: Add Baikal-T1 APB-bus driver
  bus: Add Baikal-T1 AXI-bus driver
  dt-bindings: bus: Add Baikal-T1 APB-bus binding
  dt-bindings: bus: Add Baikal-T1 AXI-bus binding
  staging: tegra-video: fix V4L2 dependency
  tee: fix crypto select
  drivers: soc: ti: knav_qmss_queue: Make knav_gp_range_ops static
  soc: ti: add k3 platforms chipid module driver
  dt-bindings: soc: ti: add binding for k3 platforms chipid module
  ...
2020-06-04 19:56:20 -07:00
Qiushi Wu
c343bf1ba5 cpuidle: Fix three reference count leaks
kobject_init_and_add() takes reference even when it fails.
If this function returns an error, kobject_put() must be called to
properly clean up the memory associated with the object.

Previous commit "b8eb718348b8" fixed a similar problem.

Signed-off-by: Qiushi Wu <wu000273@umn.edu>
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-05-29 18:07:18 +02:00
Stephan Gerhold
a871be6b8e cpuidle: Convert Qualcomm SPM driver to a generic CPUidle driver
The Qualcomm SPM cpuidle driver seems to be the last driver still
using the generic ARM CPUidle infrastructure.

Converting it actually allows us to simplify the driver,
and we end up being able to remove more lines than adding new ones:

  - We can parse the CPUidle states in the device tree directly
    with dt_idle_states (and don't need to duplicate that
    functionality into the spm driver).

  - Each "saw" device managed by the SPM driver now directly
    registers its own cpuidle driver, removing the need for
    any global (per cpu) state.

The device tree binding is the same, so the driver stays
compatible with all old device trees.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Lina Iyer <ilina@codeaurora.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-05-26 10:46:01 +02:00
Hanjun Guo
cce55cc902 cpuidle: sysfs: Remove sysfs_switch and switch attributes
Since the cpuidle governor can be switched via sysfs in default,
remove sysfs_switch and cpuidle_switch_attrs.

Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Doug Smythies <dsmythies@telus.net>
Tested-by: Doug Smythies <dsmythies@telus.net>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-05-19 17:41:17 +02:00
Hanjun Guo
b52e93e4e8 cpuidle: Make cpuidle governor switchable to be the default behaviour
For now cpuidle governor can be switched via sysfs only when the
boot option "cpuidle_sysfs_switch" is passed, but it's important
to switch the governor to adapt to different workloads, especially
after TEO and haltpoll governor were introduced.

Add available_governors and current_governor into the default
attributes, but reserve the current_governor_ro for compatiblity.

Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Doug Smythies <dsmythies@telus.net>
Tested-by: Doug Smythies <dsmythies@telus.net>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-05-19 17:41:17 +02:00
Hanjun Guo
ef7e7d65eb cpuidle: sysfs: Accept governor name with 15 characters
CPUIDLE_NAME_LEN is 16, so it's possible to accept governor name
with 15 characters, but now store_current_governor() rejects
governor name with 15 characters as it returns -EINVAL if count
equals CPUIDLE_NAME_LEN.

Refactor the code to accept such case and simplify the code.

Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Doug Smythies <dsmythies@telus.net>
Tested-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-05-19 17:41:17 +02:00
Hanjun Guo
3f9f8daad3 cpuidle: sysfs: Fix the overlap for showing available governors
When showing the available governors, it's "%s " in scnprintf(),
not "%s", so if the governor name has 15 characters, it will
overlap with the later one, fix it by adding one more for the
size.

While we are at it, fix the minor coding style issue and remove
the "/sizeof(char)" since sizeof(char) always equals 1.

Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Doug Smythies <dsmythies@telus.net>
Tested-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-05-19 17:41:17 +02:00
Daniel Lezcano
fc7a3d9e9c thermal: cpuidle: Register cpuidle cooling device
The cpuidle driver can be used as a cooling device by injecting idle
cycles.

When the property is set, register the cpuidle driver with the idle
state node pointer as a cooling device. The thermal framework will do
the association automatically with the thermal zone via the
cooling-device defined in the device tree cooling-maps section.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20200429103644.5492-4-daniel.lezcano@linaro.org
2020-05-19 12:58:07 +02:00
Ulf Hansson
8b7ce5e490 cpuidle: psci: Fixup execution order when entering a domain idle state
Moving forward, platforms are going to need to execute specific "last-man"
operations before a domain idle state can be entered. In one way or the
other, these operations needs to be triggered while walking the
hierarchical topology via runtime PM and genpd, as it's at that point the
last-man becomes known.

Moreover, executing last-man operations needs to be done after the CPU PM
notifications are sent through cpu_pm_enter(), as otherwise it's likely
that some notifications would fail. Therefore, let's re-order the sequence
in psci_enter_domain_idle_state(), so cpu_pm_enter() gets called prior
pm_runtime_put_sync().

Fixes: ce85aef570 ("cpuidle: psci: Manage runtime PM in the idle path")
Reported-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-05-15 18:37:36 +02:00
Dmitry Osipenko
fafd62e768 cpuidle: tegra: Support CPU cluster power-down state on Tegra30
The new Tegra CPU Idle driver now has a unified code path for the coupled
CC6 (LP2) state, this allows to enable the deepest idling state on Tegra30
SoC where the whole CPU cluster is power-gated.

Tested-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Tested-by: Jasper Korten <jja2000@gmail.com>
Tested-by: David Heidelberg <david@ixit.cz>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-05-06 18:42:55 +02:00
Gautham R. Shenoy
c4019198cf powerpc/idle: Store PURR snapshot in a per-cpu global variable
Currently when CPU goes idle, we take a snapshot of PURR via
pseries_idle_prolog() which is used at the CPU idle exit to compute
the idle PURR cycles via the function pseries_idle_epilog().  Thus,
the value of idle PURR cycle thus read before pseries_idle_prolog() and
after pseries_idle_epilog() is always correct.

However, if we were to read the idle PURR cycles from an interrupt
context between pseries_idle_prolog() and pseries_idle_epilog() (this
will be done in a future patch), then, the value of the idle PURR thus
read will not include the cycles spent in the most recent idle period.
Thus, in that interrupt context, we will need access to the snapshot
of the PURR before going idle, in order to compute the idle PURR
cycles for the latest idle duration.

In this patch, we save the snapshot of PURR in pseries_idle_prolog()
in a per-cpu variable, instead of on the stack, so that it can be
accessed from an interrupt context.

Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1586249263-14048-3-git-send-email-ego@linux.vnet.ibm.com
2020-04-30 12:35:26 +10:00
Gautham R. Shenoy
e4a884cc28 powerpc: Move idle_loop_prolog()/epilog() functions to header file
Currently prior to entering an idle state on a Linux Guest, the
pseries cpuidle driver implement an idle_loop_prolog() and
idle_loop_epilog() functions which ensure that idle_purr is correctly
computed, and the hypervisor is informed that the CPU cycles have been
donated.

These prolog and epilog functions are also required in the default
idle call, i.e pseries_lpar_idle(). Hence move these accessor
functions to a common header file and call them from
pseries_lpar_idle(). Since the existing header files such as
asm/processor.h have enough clutter, create a new header file
asm/idle.h. Finally rename idle_loop_prolog() and idle_loop_epilog()
to pseries_idle_prolog() and pseries_idle_epilog() as they are only
relavent for on pseries guests.

Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1586249263-14048-2-git-send-email-ego@linux.vnet.ibm.com
2020-04-30 12:35:26 +10:00
Hanjun Guo
eba933ceeb cpuidle: sysfs: Minor coding style corrections
Fix two minor coding style issues.

Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-29 13:33:24 +02:00
Hanjun Guo
2f516e7cbe cpuidle: sysfs: Remove the unused define_one_r(o/w) macros
The define_one_ro and define_one_rw macros are not used,
remove it.

Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-29 13:33:24 +02:00