Current implementation of UFFDIO_MOVE fails to move zeropages and returns
EBUSY when it encounters one. We can handle them by mapping a zeropage at
the destination and clearing the mapping at the source. This is done both
for ordinary and for huge zeropages.
Link: https://lkml.kernel.org/r/20240131175618.2417291-1-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202401300107.U8iMAkTl-lkp@intel.com/
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Nicolas Geoffray <ngeoffray@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: ZhangPeng <zhangpeng362@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
XArray multi-index entries do not keep track of the order stored once the
entry is being marked as used with cmpxchg (conditionally replaced with
NULL). Add a test to check the order is actually lost. The test also
verifies the order and entries for all the tied indexes before and after
the NULL replacement with xa_cmpxchg.
Add another entry at 1 << order that keeps the node around and the order
information for the NULL-entry after xa_cmpxchg.
Link: https://lkml.kernel.org/r/20240131225125.1370598-3-mcgrof@kernel.org
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "test_xarray: advanced API multi-index tests", v2.
This is a respin of the test_xarray multi-index tests [0] which use and
demonstrate the advanced API which is used by the page cache. This should
let folks more easily follow how we use multi-index to support for example
a min order later in the page cache. It also lets us grow the selftests
to mimic more of what we do in the page cache.
This patch (of 2):
The multi index selftests are great but they don't replicate how we deal
with the page cache exactly, which makes it a bit hard to follow as the
page cache uses the advanced API.
Add tests which use the advanced API, mimicking what we do in the page
cache, while at it, extend the example to do what is needed for min order
support.
[mcgrof@kernel.org: fix soft lockup for advanced-api tests]
Link: https://lkml.kernel.org/r/20240216194329.840555-1-mcgrof@kernel.org
[akpm@linux-foundation.org: s/i/loops/, make non-static]
[akpm@linux-foundation.org: restore static storage for loop counter]
Link: https://lkml.kernel.org/r/20240131225125.1370598-1-mcgrof@kernel.org
Link: https://lkml.kernel.org/r/20240131225125.1370598-2-mcgrof@kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Tested-by: Daniel Gomez <da.gomez@samsung.com>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Invalid cma_alloc() input scenarios - including excess allocation request
should neither be counted as CMA_ALLOC_FAIL nor 'cma->nr_pages_failed' be
updated when applicable with CONFIG_CMA_SYSFS. This also drops 'out' jump
label which has become redundant.
Link: https://lkml.kernel.org/r/20240201023714.3871061-1-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a readable attribute in debugfs to trigger a W^X pages check at any
time.
To trigger the test, just read /sys/kernel/debug/check_wx_pages It will
report FAILED if the test failed, SUCCESS otherwise.
Detailed result is provided into dmesg.
Link: https://lkml.kernel.org/r/e947fb1a9f3f5466344823e532d343ff194ae03d.1706610398.git.christophe.leroy@csgroup.eu
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: "Aneesh Kumar K.V (IBM)" <aneesh.kumar@kernel.org>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Greg KH <greg@kroah.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Phong Tran <tranmanphong@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Steven Price <steven.price@arm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Following patch will use ptdump_check_wx() regardless of CONFIG_DEBUG_WX,
so define it at all times on powerpc and s390 just like other
architectures. Though keep the WARN_ON_ONCE() only when CONFIG_DEBUG_WX
is set.
Link: https://lkml.kernel.org/r/07bfb04c7fec58e84413e91d2533581be357a696.1706610398.git.christophe.leroy@csgroup.eu
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: "Aneesh Kumar K.V (IBM)" <aneesh.kumar@kernel.org>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Greg KH <greg@kroah.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Phong Tran <tranmanphong@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Steven Price <steven.price@arm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
All architectures using the core ptdump functionality also implement
CONFIG_DEBUG_WX, and they all do it more or less the same way, with a
function called debug_checkwx() that is called by mark_rodata_ro(), which
is a substitute to ptdump_check_wx() when CONFIG_DEBUG_WX is set and a
no-op otherwise.
Refactor by centrally defining debug_checkwx() in linux/ptdump.h and call
debug_checkwx() immediately after calling mark_rodata_ro() instead of
calling it at the end of every mark_rodata_ro().
On x86_32, mark_rodata_ro() first checks __supported_pte_mask has _PAGE_NX
before calling debug_checkwx(). Now the check is inside the callee
ptdump_walk_pgd_level_checkwx().
On powerpc_64, mark_rodata_ro() bails out early before calling
ptdump_check_wx() when the MMU doesn't have KERNEL_RO feature. The check
is now also done in ptdump_check_wx() as it is called outside
mark_rodata_ro().
Link: https://lkml.kernel.org/r/a59b102d7964261d31ead0316a9f18628e4e7a8e.1706610398.git.christophe.leroy@csgroup.eu
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: "Aneesh Kumar K.V (IBM)" <aneesh.kumar@kernel.org>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Greg KH <greg@kroah.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Phong Tran <tranmanphong@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Steven Price <steven.price@arm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: ptdump: Refactor CONFIG_DEBUG_WX and check_wx_pages
debugfs attribute", v2.
This series refactors CONFIG_DEBUG_WX for the 5 architectures implementing
CONFIG_GENERIC_PTDUMP
First rename stuff in ARM which uses similar names while not implementing
CONFIG_GENERIC_PTDUMP.
Then define a generic version of debug_checkwx() that calls
ptdump_check_wx() when CONFIG_DEBUG_WX is set. Call it immediately after
calling mark_rodata_ro() instead of calling it at the end of every
mark_rodata_ro().
Then implement a debugfs attribute that can be used to trigger a W^X test
at anytime and regardless of CONFIG_DEBUG_WX
This patch (of 5):
CONFIG_DEBUG_WX is a core option defined in mm/Kconfig.debug
To avoid any future conflict, rename ARM version into CONFIG_ARM_DEBUG_WX.
Link: https://lore.kernel.org/lkml/20200422152656.GF676@willie-the-truck/T/#m802eaf33efd6f8d575939d157301b35ac0d4a64f
Link: https://github.com/KSPP/linux/issues/35
Link: https://lkml.kernel.org/r/cover.1706610398.git.christophe.leroy@csgroup.eu
Link: https://lkml.kernel.org/r/fa297aa90caeb61eee2b70c6c5897a2ab58a9562.1706610398.git.christophe.leroy@csgroup.eu
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: "Aneesh Kumar K.V (IBM)" <aneesh.kumar@kernel.org>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Greg KH <greg@kroah.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Phong Tran <tranmanphong@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Steven Price <steven.price@arm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In the event of rebind, pol->nodemask can change at the same time as an
allocation occurs. We can detect this with tsk->mems_allowed_seq and
prevent a miscount or an allocation failure from occurring.
The same thing happens in the allocators to detect failure, but this can
prevent spurious failures in a much smaller critical section.
[gourry.memverge@gmail.com: weighted interleave checks wrong parameter]
Link: https://lkml.kernel.org/r/20240206192853.3589-1-gregory.price@memverge.com
Link: https://lkml.kernel.org/r/20240202170238.90004-5-gregory.price@memverge.com
Signed-off-by: Gregory Price <gregory.price@memverge.com>
Suggested-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Hasan Al Maruf <Hasan.Maruf@amd.com>
Cc: Honggyu Kim <honggyu.kim@sk.com>
Cc: Hyeongtak Ji <hyeongtak.ji@sk.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Ravi Jonnalagadda <ravis.opensrc@micron.com>
Cc: Srinivasulu Thanneeru <sthanneeru.opensrc@micron.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When a system has multiple NUMA nodes and it becomes bandwidth hungry,
using the current MPOL_INTERLEAVE could be an wise option.
However, if those NUMA nodes consist of different types of memory such as
socket-attached DRAM and CXL/PCIe attached DRAM, the round-robin based
interleave policy does not optimally distribute data to make use of their
different bandwidth characteristics.
Instead, interleave is more effective when the allocation policy follows
each NUMA nodes' bandwidth weight rather than a simple 1:1 distribution.
This patch introduces a new memory policy, MPOL_WEIGHTED_INTERLEAVE,
enabling weighted interleave between NUMA nodes. Weighted interleave
allows for proportional distribution of memory across multiple numa nodes,
preferably apportioned to match the bandwidth of each node.
For example, if a system has 1 CPU node (0), and 2 memory nodes (0,1),
with bandwidth of (100GB/s, 50GB/s) respectively, the appropriate weight
distribution is (2:1).
Weights for each node can be assigned via the new sysfs extension:
/sys/kernel/mm/mempolicy/weighted_interleave/
For now, the default value of all nodes will be `1`, which matches the
behavior of standard 1:1 round-robin interleave. An extension will be
added in the future to allow default values to be registered at kernel and
device bringup time.
The policy allocates a number of pages equal to the set weights. For
example, if the weights are (2,1), then 2 pages will be allocated on node0
for every 1 page allocated on node1.
The new flag MPOL_WEIGHTED_INTERLEAVE can be used in set_mempolicy(2)
and mbind(2).
Some high level notes about the pieces of weighted interleave:
current->il_prev:
Tracks the node previously allocated from.
current->il_weight:
The active weight of the current node (current->il_prev)
When this reaches 0, current->il_prev is set to the next node
and current->il_weight is set to the next weight.
weighted_interleave_nodes:
Counts the number of allocations as they occur, and applies the
weight for the current node. When the weight reaches 0, switch
to the next node. Operates only on task->mempolicy.
weighted_interleave_nid:
Gets the total weight of the nodemask as well as each individual
node weight, then calculates the node based on the given index.
Operates on VMA policies.
bulk_array_weighted_interleave:
Gets the total weight of the nodemask as well as each individual
node weight, then calculates the number of "interleave rounds" as
well as any delta ("partial round"). Calculates the number of
pages for each node and allocates them.
If a node was scheduled for interleave via interleave_nodes, the
current weight will be allocated first.
Operates only on the task->mempolicy.
One piece of complexity is the interaction between a recent refactor which
split the logic to acquire the "ilx" (interleave index) of an allocation
and the actually application of the interleave. If a call to
alloc_pages_mpol() were made with a weighted-interleave policy and ilx set
to NO_INTERLEAVE_INDEX, weighted_interleave_nodes() would operate on a VMA
policy - violating the description above.
An inspection of all callers of alloc_pages_mpol() shows that all external
callers set ilx to `0`, an index value, or will call get_vma_policy() to
acquire the ilx.
For example, mm/shmem.c may call into alloc_pages_mpol. The call stacks
all set (pgoff_t ilx) or end up in `get_vma_policy()`. This enforces the
`weighted_interleave_nodes()` and `weighted_interleave_nid()` policy
requirements (task/vma respectively).
Link: https://lkml.kernel.org/r/20240202170238.90004-4-gregory.price@memverge.com
Suggested-by: Hasan Al Maruf <Hasan.Maruf@amd.com>
Signed-off-by: Gregory Price <gregory.price@memverge.com>
Co-developed-by: Rakie Kim <rakie.kim@sk.com>
Signed-off-by: Rakie Kim <rakie.kim@sk.com>
Co-developed-by: Honggyu Kim <honggyu.kim@sk.com>
Signed-off-by: Honggyu Kim <honggyu.kim@sk.com>
Co-developed-by: Hyeongtak Ji <hyeongtak.ji@sk.com>
Signed-off-by: Hyeongtak Ji <hyeongtak.ji@sk.com>
Co-developed-by: Srinivasulu Thanneeru <sthanneeru.opensrc@micron.com>
Signed-off-by: Srinivasulu Thanneeru <sthanneeru.opensrc@micron.com>
Co-developed-by: Ravi Jonnalagadda <ravis.opensrc@micron.com>
Signed-off-by: Ravi Jonnalagadda <ravis.opensrc@micron.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Move the use of barrier() to force policy->nodemask onto the stack into a
function `read_once_policy_nodemask` so that it may be re-used.
Link: https://lkml.kernel.org/r/20240202170238.90004-3-gregory.price@memverge.com
Signed-off-by: Gregory Price <gregory.price@memverge.com>
Suggested-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Hasan Al Maruf <Hasan.Maruf@amd.com>
Cc: Honggyu Kim <honggyu.kim@sk.com>
Cc: Hyeongtak Ji <hyeongtak.ji@sk.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Ravi Jonnalagadda <ravis.opensrc@micron.com>
Cc: Srinivasulu Thanneeru <sthanneeru.opensrc@micron.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/mempolicy: weighted interleave mempolicy and sysfs
extension", v5.
Weighted interleave is a new interleave policy intended to make use of
heterogeneous memory environments appearing with CXL.
The existing interleave mechanism does an even round-robin distribution of
memory across all nodes in a nodemask, while weighted interleave
distributes memory across nodes according to a provided weight. (Weight =
# of page allocations per round)
Weighted interleave is intended to reduce average latency when bandwidth
is pressured - therefore increasing total throughput.
In other words: It allows greater use of the total available bandwidth in
a heterogeneous hardware environment (different hardware provides
different bandwidth capacity).
As bandwidth is pressured, latency increases - first linearly and then
exponentially. By keeping bandwidth usage distributed according to
available bandwidth, we therefore can reduce the average latency of a
cacheline fetch.
A good explanation of the bandwidth vs latency response curve:
https://mahmoudhatem.wordpress.com/2017/11/07/memory-bandwidth-vs-latency-response-curve/
From the article:
```
Constant region:
The latency response is fairly constant for the first 40%
of the sustained bandwidth.
Linear region:
In between 40% to 80% of the sustained bandwidth, the
latency response increases almost linearly with the bandwidth
demand of the system due to contention overhead by numerous
memory requests.
Exponential region:
Between 80% to 100% of the sustained bandwidth, the memory
latency is dominated by the contention latency which can be
as much as twice the idle latency or more.
Maximum sustained bandwidth :
Is 65% to 75% of the theoretical maximum bandwidth.
```
As a general rule of thumb:
* If bandwidth usage is low, latency does not increase. It is
optimal to place data in the nearest (lowest latency) device.
* If bandwidth usage is high, latency increases. It is optimal
to place data such that bandwidth use is optimized per-device.
This is the top line goal: Provide a user a mechanism to target using the
"maximum sustained bandwidth" of each hardware component in a heterogenous
memory system.
For example, the stream benchmark demonstrates that 1:1 (default)
interleave is actively harmful, while weighted interleave can be
beneficial. Default interleave distributes data such that too much
pressure is placed on devices with lower available bandwidth.
Stream Benchmark (vs DRAM, 1 Socket + 1 CXL Device)
Default interleave : -78% (slower than DRAM)
Global weighting : -6% to +4% (workload dependant)
Targeted weights : +2.5% to +4% (consistently better than DRAM)
Global means the task-policy was set (set_mempolicy), while targeted means
VMA policies were set (mbind2). We see weighted interleave is not always
beneficial when applied globally, but is always beneficial when applied to
bandwidth-driving memory regions.
There are 4 patches in this set:
1) Implement system-global interleave weights as sysfs extension
in mm/mempolicy.c. These weights are RCU protected, and a
default weight set is provided (all weights are 1 by default).
In future work, we intend to expose an interface for HMAT/CDAT
code to set reasonable default values based on the memory
configuration of the system discovered at boot/hotplug.
2) A mild refactor of some interleave-logic for re-use in the
new weighted interleave logic.
3) MPOL_WEIGHTED_INTERLEAVE extension for set_mempolicy/mbind
4) Protect interleave logic (weighted and normal) with the
mems_allowed seq cookie. If the nodemask changes while
accessing it during a rebind, just retry the access.
Included below are some performance and LTP test information,
and a sample numactl branch which can be used for testing.
= Performance summary =
(tests may have different configurations, see extended info below)
1) MLC (W2) : +38% over DRAM. +264% over default interleave.
MLC (W5) : +40% over DRAM. +226% over default interleave.
2) Stream : -6% to +4% over DRAM, +430% over default interleave.
3) XSBench : +19% over DRAM. +47% over default interleave.
= LTP Testing Summary =
existing mempolicy & mbind tests: pass
mempolicy & mbind + weighted interleave (global weights): pass
= version history
v5:
- style fixes
- mems_allowed cookie protection to detect rebind issues,
prevents spurious allocation failures and/or mis-allocations
- sparse warning fixes related to __rcu on local variables
=====================================================================
Performance tests - MLC
From - Ravi Jonnalagadda <ravis.opensrc@micron.com>
Hardware: Single-socket, multiple CXL memory expanders.
Workload: W2
Data Signature: 2:1 read:write
DRAM only bandwidth (GBps): 298.8
DRAM + CXL (default interleave) (GBps): 113.04
DRAM + CXL (weighted interleave)(GBps): 412.5
Gain over DRAM only: 1.38x
Gain over default interleave: 2.64x
Workload: W5
Data Signature: 1:1 read:write
DRAM only bandwidth (GBps): 273.2
DRAM + CXL (default interleave) (GBps): 117.23
DRAM + CXL (weighted interleave)(GBps): 382.7
Gain over DRAM only: 1.4x
Gain over default interleave: 2.26x
=====================================================================
Performance test - Stream
From - Gregory Price <gregory.price@memverge.com>
Hardware: Single socket, single CXL expander
numactl extension: https://github.com/gmprice/numactl/tree/weighted_interleave_master
Summary: 64 threads, ~18GB workload, 3GB per array, executed 100 times
Default interleave : -78% (slower than DRAM)
Global weighting : -6% to +4% (workload dependant)
mbind2 weights : +2.5% to +4% (consistently better than DRAM)
dram only:
numactl --cpunodebind=1 --membind=1 ./stream_c.exe --ntimes 100 --array-size 400M --malloc
Function Direction BestRateMBs AvgTime MinTime MaxTime
Copy: 0->0 200923.2 0.032662 0.031853 0.033301
Scale: 0->0 202123.0 0.032526 0.031664 0.032970
Add: 0->0 208873.2 0.047322 0.045961 0.047884
Triad: 0->0 208523.8 0.047262 0.046038 0.048414
CXL-only:
numactl --cpunodebind=1 -w --membind=2 ./stream_c.exe --ntimes 100 --array-size 400M --malloc
Copy: 0->0 22209.7 0.288661 0.288162 0.289342
Scale: 0->0 22288.2 0.287549 0.287147 0.288291
Add: 0->0 24419.1 0.393372 0.393135 0.393735
Triad: 0->0 24484.6 0.392337 0.392083 0.394331
Based on the above, the optimal weights are ~9:1
echo 9 > /sys/kernel/mm/mempolicy/weighted_interleave/node1
echo 1 > /sys/kernel/mm/mempolicy/weighted_interleave/node2
default interleave:
numactl --cpunodebind=1 --interleave=1,2 ./stream_c.exe --ntimes 100 --array-size 400M --malloc
Copy: 0->0 44666.2 0.143671 0.143285 0.144174
Scale: 0->0 44781.6 0.143256 0.142916 0.143713
Add: 0->0 48600.7 0.197719 0.197528 0.197858
Triad: 0->0 48727.5 0.197204 0.197014 0.197439
global weighted interleave:
numactl --cpunodebind=1 -w --interleave=1,2 ./stream_c.exe --ntimes 100 --array-size 400M --malloc
Copy: 0->0 190085.9 0.034289 0.033669 0.034645
Scale: 0->0 207677.4 0.031909 0.030817 0.033061
Add: 0->0 202036.8 0.048737 0.047516 0.053409
Triad: 0->0 217671.5 0.045819 0.044103 0.046755
targted regions w/ global weights (modified stream to mbind2 malloc'd regions))
numactl --cpunodebind=1 --membind=1 ./stream_c.exe -b --ntimes 100 --array-size 400M --malloc
Copy: 0->0 205827.0 0.031445 0.031094 0.031984
Scale: 0->0 208171.8 0.031320 0.030744 0.032505
Add: 0->0 217352.0 0.045087 0.044168 0.046515
Triad: 0->0 216884.8 0.045062 0.044263 0.046982
=====================================================================
Performance tests - XSBench
From - Hyeongtak Ji <hyeongtak.ji@sk.com>
Hardware: Single socket, Single CXL memory Expander
NUMA node 0: 56 logical cores, 128 GB memory
NUMA node 2: 96 GB CXL memory
Threads: 56
Lookups: 170,000,000
Summary: +19% over DRAM. +47% over default interleave.
Performance tests - XSBench
1. dram only
$ numactl -m 0 ./XSBench -s XL –p 5000000
Runtime: 36.235 seconds
Lookups/s: 4,691,618
2. default interleave
$ numactl –i 0,2 ./XSBench –s XL –p 5000000
Runtime: 55.243 seconds
Lookups/s: 3,077,293
3. weighted interleave
numactl –w –i 0,2 ./XSBench –s XL –p 5000000
Runtime: 29.262 seconds
Lookups/s: 5,809,513
=====================================================================
LTP Tests: https://github.com/gmprice/ltp/tree/mempolicy2
= Existing tests
set_mempolicy, get_mempolicy, mbind
MPOL_WEIGHTED_INTERLEAVE added manually to test basic functionality but
did not adjust tests for weighting. Basically the weights were set to 1,
which is the default, and it should behave the same as MPOL_INTERLEAVE if
logic is correct.
== set_mempolicy01 : passed 18, failed 0
== set_mempolicy02 : passed 10, failed 0
== set_mempolicy03 : passed 64, failed 0
== set_mempolicy04 : passed 32, failed 0
== set_mempolicy05 - n/a on non-x86
== set_mempolicy06 : passed 10, failed 0
this is set_mempolicy02 + MPOL_WEIGHTED_INTERLEAVE
== set_mempolicy07 : passed 32, failed 0
set_mempolicy04 + MPOL_WEIGHTED_INTERLEAVE
== get_mempolicy01 : passed 12, failed 0
change: added MPOL_WEIGHTED_INTERLEAVE
== get_mempolicy02 : passed 2, failed 0
== mbind01 : passed 15, failed 0
added MPOL_WEIGHTED_INTERLEAVE
== mbind02 : passed 4, failed 0
added MPOL_WEIGHTED_INTERLEAVE
== mbind03 : passed 16, failed 0
added MPOL_WEIGHTED_INTERLEAVE
== mbind04 : passed 48, failed 0
added MPOL_WEIGHTED_INTERLEAVE
=====================================================================
numactl (set_mempolicy) w/ global weighting test
numactl fork: https://github.com/gmprice/numactl/tree/weighted_interleave_master
command: numactl -w --interleave=0,1 ./eatmem
result (weights 1:1):
0176a000 weighted interleave:0-1 heap anon=65793 dirty=65793 active=0 N0=32897 N1=32896 kernelpagesize_kB=4
7fceeb9ff000 weighted interleave:0-1 anon=65537 dirty=65537 active=0 N0=32768 N1=32769 kernelpagesize_kB=4
50% distribution is correct
result (weights 5:1):
01b14000 weighted interleave:0-1 heap anon=65793 dirty=65793 active=0 N0=54828 N1=10965 kernelpagesize_kB=4
7f47a1dff000 weighted interleave:0-1 anon=65537 dirty=65537 active=0 N0=54614 N1=10923 kernelpagesize_kB=4
16.666% distribution is correct
result (weights 1:5):
01f07000 weighted interleave:0-1 heap anon=65793 dirty=65793 active=0 N0=10966 N1=54827 kernelpagesize_kB=4
7f17b1dff000 weighted interleave:0-1 anon=65537 dirty=65537 active=0 N0=10923 N1=54614 kernelpagesize_kB=4
16.666% distribution is correct
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
int main (void)
{
char* mem = malloc(1024*1024*256);
memset(mem, 1, 1024*1024*256);
for (int i = 0; i < ((1024*1024*256)/4096); i++)
{
mem = malloc(4096);
mem[0] = 1;
}
printf("done\n");
getchar();
return 0;
}
This patch (of 4):
This patch provides a way to set interleave weight information under sysfs
at /sys/kernel/mm/mempolicy/weighted_interleave/nodeN
The sysfs structure is designed as follows.
$ tree /sys/kernel/mm/mempolicy/
/sys/kernel/mm/mempolicy/ [1]
└── weighted_interleave [2]
├── node0 [3]
└── node1
Each file above can be explained as follows.
[1] mm/mempolicy: configuration interface for mempolicy subsystem
[2] weighted_interleave/: config interface for weighted interleave policy
[3] weighted_interleave/nodeN: weight for nodeN
If a node value is set to `0`, the system-default value will be used.
As of this patch, the system-default for all nodes is always 1.
Link: https://lkml.kernel.org/r/20240202170238.90004-1-gregory.price@memverge.com
Link: https://lkml.kernel.org/r/20240202170238.90004-2-gregory.price@memverge.com
Suggested-by: "Huang, Ying" <ying.huang@intel.com>
Signed-off-by: Rakie Kim <rakie.kim@sk.com>
Signed-off-by: Honggyu Kim <honggyu.kim@sk.com>
Co-developed-by: Gregory Price <gregory.price@memverge.com>
Signed-off-by: Gregory Price <gregory.price@memverge.com>
Co-developed-by: Hyeongtak Ji <hyeongtak.ji@sk.com>
Signed-off-by: Hyeongtak Ji <hyeongtak.ji@sk.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Gregory Price <gourry.memverge@gmail.com>
Cc: Hasan Al Maruf <Hasan.Maruf@amd.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Srinivasulu Thanneeru <sthanneeru.opensrc@micron.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use SZ_{8K, 128K} helper macro instead of the number in init_user_reserve
and reserve_mem_notifier. This is more readable.
Link: https://lkml.kernel.org/r/20240131031913.2058597-1-yajun.deng@linux.dev
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Update DAMON debugfs interface sections on the translated usage documents
to reflect the fact that 'monitor_on' file has renamed to
'monitor_on_DEPRECATED'.
Link: https://lkml.kernel.org/r/20240130013549.89538-10-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Alex Shi <alexs@kernel.org>
Cc: Hu Haowen <2023002089@link.tyut.edu.cn>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Update DAMON debugfs interface sections on the usage document to reflect
the fact that 'monitor_on' file has renamed to 'monitor_on_DEPRECATED'.
Link: https://lkml.kernel.org/r/20240130013549.89538-9-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Alex Shi <alexs@kernel.org>
Cc: Hu Haowen <2023002089@link.tyut.edu.cn>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kernel builders could silently enable CONFIG_DAMON_DBGFS_DEPRECATED.
Users who manually check the files under the DAMON debugfs directory could
notice the deprecation owing to the 'DEPRECATED' DAMON debugfs file, but
there could be users who doesn't manually check the files.
Make the deprecation cannot be ignored in the case by renaming
'monitor_on' file, which is essential for real use of DAMON on runtime, to
'monitor_on_DEPRECATED'. Still users who control DAMON via only
user-space tool could ignore the deprecation, but that's what the tool
developers should take care of. DAMON user-space tool, damo, has also
made a change[1] for the purpose.
[1] commit 935dae76f2aee ("_damon_args: Rename --damon_interface to
--damon_interface_DEPRECATED") of https://github.com/awslabs/damo
Link: https://lkml.kernel.org/r/20240130013549.89538-8-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Alex Shi <alexs@kernel.org>
Cc: Hu Haowen <2023002089@link.tyut.edu.cn>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Following change will rename 'monitor_on' DAMON debugfs file to
'monitor_on_DEPRECATED', to make the deprecation unignorable in runtime.
Since it could make DAMON selftests fail and disturb future bisects,
update DAMON selftests to support the change.
Link: https://lkml.kernel.org/r/20240130013549.89538-7-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Alex Shi <alexs@kernel.org>
Cc: Hu Haowen <2023002089@link.tyut.edu.cn>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Document the newly added DAMON debugfs interface deprecation notice file
on the usage document.
Link: https://lkml.kernel.org/r/20240130013549.89538-6-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Alex Shi <alexs@kernel.org>
Cc: Hu Haowen <2023002089@link.tyut.edu.cn>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON debugfs interface deprecation message is written twice, once for the
warning, and again for DEPRECATED file's read output. De-duplicate those
by defining the message as a macro and reuse.
[akpm@linux-foundation.org: s/comnst/const/]
Link: https://lkml.kernel.org/r/20240130013549.89538-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Alex Shi <alexs@kernel.org>
Cc: Hu Haowen <2023002089@link.tyut.edu.cn>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Implement a read-only file for DAMON debugfs interface deprecation notice,
to let users who manually read/write the DAMON debugfs files from their
shell command line easily notice the fact.
[arnd@arndb.de: fix bogus string length]
Link: https://lkml.kernel.org/r/20240202124339.892862-1-arnd@kernel.org
Link: https://lkml.kernel.org/r/20240130013549.89538-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Alex Shi <alexs@kernel.org>
Cc: Hu Haowen <2023002089@link.tyut.edu.cn>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON debugfs interface is deprecated. The fact has documented by commit
5445fcbc4c ("Docs/admin-guide/mm/damon/usage: add DAMON debugfs
interface deprecation notice"). Commit 620932cd28 ("mm/damon/dbgfs:
print DAMON debugfs interface deprecation message") further started
printing a warning message when users still use it. Many people don't
read documentation or kernel log, though.
Make the deprecation harder to be ignored using the approach of commit
eb07c4f39c ("mm/slab: rename CONFIG_SLAB to CONFIG_SLAB_DEPRECATED").
'make oldconfig' with 'CONFIG_DAMON_DBGFS=y' will get a new prompt with
the explicit deprecation notice on the name. 'make olddefconfig' with
'CONFIG_DAMON_DBGFS=y' will result in not building DAMON debugfs
interface. If there is a real user of DAMON debugfs interface, they will
complain the change to the builder.
Link: https://lkml.kernel.org/r/20240130013549.89538-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Alex Shi <alexs@kernel.org>
Cc: Hu Haowen <2023002089@link.tyut.edu.cn>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/damon: make DAMON debugfs interface deprecation
unignorable".
DAMON debugfs interface is deprecated in February 2023, by commit
5445fcbc4c ("Docs/admin-guide/mm/damon/usage: add DAMON debugfs
interface deprecation notice"). Make the fact unable to be easily ignored
by removing an example usage from the document (patch 1), renaming the
config (patch 2), adding a deprecation notice file to the debugfs
directory (patches 3-5), and renaming the debugfs file that essnetial to
be used for real use of DAMON (patches 6-9).
This patch (of 9):
DAMON tracepoints example on the DAMON usage document is using DAMON
debugfs interface, which is deprecated. Use its alternative, DAMON sysfs
interface.
Link: https://lkml.kernel.org/r/20240130013549.89538-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20240130013549.89538-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Alex Shi <alexs@kernel.org>
Cc: Hu Haowen <2023002089@link.tyut.edu.cn>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
shrink_memcg_cb() is called by the shrinker and is based on
zswap_writeback_entry(). Move it in between. Save one fwd decl.
Link: https://lkml.kernel.org/r/20240130014208.565554-21-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: Chengming Zhou <zhouchengming@bytedance.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The per-cpu compression init/exit callbacks are awkwardly in the
middle of the shrinker code. Move them up to the compression section.
Link: https://lkml.kernel.org/r/20240130014208.565554-19-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: Chengming Zhou <zhouchengming@bytedance.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Writeback needs to decompress. Move the (de)compression API above what
will be the consolidated shrinking/writeback code.
Link: https://lkml.kernel.org/r/20240130014208.565554-18-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: Chengming Zhou <zhouchengming@bytedance.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The higher-level entry operations modify the tree, so move the entry
API after the tree section.
Link: https://lkml.kernel.org/r/20240130014208.565554-17-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: Chengming Zhou <zhouchengming@bytedance.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This completes consolidation of the LRU section.
Link: https://lkml.kernel.org/r/20240130014208.565554-16-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: Chengming Zhou <zhouchengming@bytedance.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The zswap entry section sits awkwardly in the middle of LRU-related
functions. Group the external LRU API functions first.
Link: https://lkml.kernel.org/r/20240130014208.565554-15-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: Chengming Zhou <zhouchengming@bytedance.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: zswap: cleanups".
Cleanups and maintenance items that accumulated while reviewing zswap
patches.
This patch (of 20):
The parameters primarily control pool attributes. Move those
operations up to the pool section.
Link: https://lkml.kernel.org/r/20240130014208.565554-1-hannes@cmpxchg.org
Link: https://lkml.kernel.org/r/20240130014208.565554-14-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: Chengming Zhou <zhouchengming@bytedance.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Move the operations against the global zswap_pools list (current pool,
last, find) to the pool section.
Link: https://lkml.kernel.org/r/20240130014208.565554-13-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: Chengming Zhou <zhouchengming@bytedance.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Move pool refcounting functions into the pool section. First the
destroy functions, then the get and put which uses them.
__zswap_pool_empty() has an upward reference to the global
zswap_pools, to sanity check it's not the currently active pool that's
being freed. That gets the forward decl for zswap_pool_current().
This puts the get and put function above all callers, so kill the
forward decls as well.
Link: https://lkml.kernel.org/r/20240130014208.565554-12-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: Chengming Zhou <zhouchengming@bytedance.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The function ordering in zswap.c is a little chaotic, which requires
jumping in unexpected directions when following related code. This is
a series of patches that brings the file into the following order:
- pool functions
- lru functions
- rbtree functions
- zswap entry functions
- compression/backend functions
- writeback & shrinking functions
- store, load, invalidate, swapon, swapoff
- debugfs
- init
But it has to be split up such the moving still produces halfway
readable diffs.
In this patch, move pool allocation and freeing functions.
Link: https://lkml.kernel.org/r/20240130014208.565554-11-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: Chengming Zhou <zhouchengming@bytedance.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The branching is awkward and duplicates code. The comment about
writeback is also misleading: yes, the entry might have been written
back. Or it might have never been stored in zswap to begin with due to
a rejection - zswap_invalidate() is called on all exiting swap entries.
Link: https://lkml.kernel.org/r/20240130014208.565554-10-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
- Remove dupentry, reusing entry works just fine.
- Rename pool to shrink_pool, as this one actually is confusing.
- Remove page, use folio_nid() and kmap_local_folio() directly.
- Set entry->swpentry in a common path.
- Move value and src to local scope of use.
Link: https://lkml.kernel.org/r/20240130014208.565554-9-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
zswap_store() is long and mixes work at the zswap layer with work at
the backend and compression layer. Move compression & backend work to
zswap_compress(), mirroring zswap_decompress().
Link: https://lkml.kernel.org/r/20240130014208.565554-8-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Remove stale comment and unnecessary local variable.
Link: https://lkml.kernel.org/r/20240130014208.565554-6-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Put a standard sanity check on zswap_entry_get() for UAF scenario.
Link: https://lkml.kernel.org/r/20240130014208.565554-5-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Move it up to the other tree and refcounting functions.
Link: https://lkml.kernel.org/r/20240130014208.565554-4-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There is only one caller and the function is trivial. Inline it.
Link: https://lkml.kernel.org/r/20240130014208.565554-3-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There is a zswap_entry_ namespace with multiple functions already.
Link: https://lkml.kernel.org/r/20240130014208.565554-2-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Since the only user zswap_lru_putback() has gone, remove
list_lru_putback() too.
Link: https://lkml.kernel.org/r/20240126-zswap-writeback-race-v2-3-b10479847099@bytedance.com
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Cc: Chris Li <chriscli@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
LRU writeback has race problem with swapoff, as spotted by Yosry [1]:
CPU1 CPU2
shrink_memcg_cb swap_off
list_lru_isolate zswap_invalidate
zswap_swapoff
kfree(tree)
// UAF
spin_lock(&tree->lock)
The problem is that the entry in lru list can't protect the tree from
being swapoff and freed, and the entry also can be invalidated and freed
concurrently after we unlock the lru lock.
We can fix it by moving the swap cache allocation ahead before referencing
the tree, then check invalidate race with tree lock, only after that we
can safely deref the entry. Note we couldn't deref entry or tree anymore
after we unlock the folio, since we depend on this to hold on swapoff.
So this patch moves all tree and entry usage to zswap_writeback_entry(),
we only use the copied swpentry on the stack to allocate swap cache and if
returned with folio locked we can reference the tree safely. Then we can
check invalidate race with tree lock, the following things is much the
same like zswap_load().
Since we can't deref the entry after zswap_writeback_entry(), we can't use
zswap_lru_putback() anymore, instead we rotate the entry in the beginning.
And it will be unlinked and freed when invalidated if writeback success.
Another change is we don't update the memcg nr_zswap_protected in the
-ENOMEM and -EEXIST cases anymore. -EEXIST case means we raced with
swapin or concurrent shrinker action, since swapin already have memcg
nr_zswap_protected updated, don't need double counts here. For concurrent
shrinker, the folio will be writeback and freed anyway. -ENOMEM case is
extremely rare and doesn't happen spuriously either, so don't bother
distinguishing this case.
[1] https://lore.kernel.org/all/CAJD7tkasHsRnT_75-TXsEe58V9_OW6m3g6CF7Kmsvz8CKRG_EA@mail.gmail.com/
Link: https://lkml.kernel.org/r/20240126-zswap-writeback-race-v2-2-b10479847099@bytedance.com
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Cc: Chris Li <chriscli@google.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In the x86 implementation of switch_mm_irqs_off(), we do not use the
"prev" argument passed in by the caller, we use exclusively use
"real_prev", which is cpu_tlbstate.loaded_mm. This is not obvious at the
first sight.
Furthermore, a comment describes a condition that happens when called with
prev == next, but this should not affect the function in any way since
prev is unused. Apparently, the comment is intended to clarify why we
don't rely on prev == next to decide whether we need to update CR3, but
again, it is not obvious. The comment also references the fact that
leave_mm() calls with prev == NULL and tsk == NULL, but this also
shouldn't matter because prev is unused and tsk is only used in one
function which has a NULL check.
Clarify things by renaming (prev -> unused) and (real_prev -> prev), also
move and rewrite the comment as an explanation for why we don't rely on
"prev" supplied by the caller in x86 code and use our own. Hopefully this
makes reading the code easier.
Link: https://lkml.kernel.org/r/20240126080644.1714297-2-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The argument is unused since commit 3d28ebceaf ("x86/mm: Rework lazy
TLB to track the actual loaded mm"), delete it.
Link: https://lkml.kernel.org/r/20240126080644.1714297-1-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
For each CPU hotplug event, we will update per-CPU data slice size and
corresponding PCP configuration for every online CPU to make the
implementation simple. But, Kyle reported that this takes tens seconds
during boot on a machine with 34 zones and 3840 CPUs.
So, in this patch, for each CPU hotplug event, we only update per-CPU data
slice size and corresponding PCP configuration for the CPUs that share
caches with the hotplugged CPU. With the patch, the system boot time
reduces 67 seconds on the machine.
Link: https://lkml.kernel.org/r/20240126081944.414520-1-ying.huang@intel.com
Fixes: 362d37a106 ("mm, pcp: reduce lock contention for draining high-order pages")
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Originally-by: Kyle Meyer <kyle.meyer@hpe.com>
Reported-and-tested-by: Kyle Meyer <kyle.meyer@hpe.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Instead of using try_to_freeze, use kthread_freezable_should_stop in
kswapd. By this, we can avoid unnecessary freezing when kswapd should
stop.
Link: https://lkml.kernel.org/r/20240126152556.58791-1-ppbuk5246@gmail.com
Signed-off-by: Levi Yun <ppbuk5246@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
