Put cgroup v1-specific code in mem_cgroup_print_oom_meminfo() under
CONFIG_MEMCG_V1.
Link: https://lkml.kernel.org/r/20240628210317.272856-4-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Move out the legacy cgroup v1 socket memory accounting code into
mm/memcontrol-v1.c.
This commit introduces three new functions: memcg1_tcpmem_active(),
memcg1_charge_skmem() and memcg1_uncharge_skmem(), which contain all
cgroup v1-specific code and become trivial if CONFIG_MEMCG_V1 isn't set.
Note, that !!memcg->tcpmem_pressure check in
mem_cgroup_under_socket_pressure() can't be easily moved into
memcontrol-v1.h without including memcontrol-v1.h from memcontrol.h which
isn't a good idea, so it's better to just #ifdef it.
Link: https://lkml.kernel.org/r/20240628210317.272856-3-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: memcg: put cgroup v1-specific memcg data under
CONFIG_MEMCG_V1".
This patchset puts all cgroup v1's members of struct mem_cgroup, struct
mem_cgroup_per_node and struct task_struct under the CONFIG_MEMCG_V1
config option. If cgroup v1 support is not required (and it's true for
many cgroup users these days), it allows to save a bit of memory and
compile out some code, some of which is on relatively hot paths. It also
structures the code a bit better by grouping cgroup v1-specific stuff in
one place.
This patch (of 9):
memcg_account_kmem() consists of a trivial statistics change via
mod_memcg_state() call and a relatively large memcg1-specific part.
Let's factor out the mod_memcg_state() call and move the rest into the
mm/memcontrol-v1.c file. Also rename memcg_account_kmem() into
memcg1_account_kmem() for consistency.
Link: https://lkml.kernel.org/r/20240628210317.272856-1-roman.gushchin@linux.dev
Link: https://lkml.kernel.org/r/20240628210317.272856-2-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Allow proactive reclaimers to submit an additional swappiness=<val>
argument to memory.reclaim. This overrides the global or per-memcg
swappiness setting for that reclaim attempt.
For example:
echo "2M swappiness=0" > /sys/fs/cgroup/memory.reclaim
will perform reclaim on the rootcg with a swappiness setting of 0 (no
swap) regardless of the vm.swappiness sysctl setting.
Userspace proactive reclaimers use the memory.reclaim interface to trigger
reclaim. The memory.reclaim interface does not allow for any way to
effect the balance of file vs anon during proactive reclaim. The only
approach is to adjust the vm.swappiness setting. However, there are a few
reasons we look to control the balance of file vs anon during proactive
reclaim, separately from reactive reclaim:
* Swapout should be limited to manage SSD write endurance. In near-OOM
situations we are fine with lots of swap-out to avoid OOMs. As these
are typically rare events, they have relatively little impact on write
endurance. However, proactive reclaim runs continuously and so its
impact on SSD write endurance is more significant. Therefore it is
desireable to control swap-out for proactive reclaim separately from
reactive reclaim
* Some userspace OOM killers like systemd-oomd[1] support OOM killing on
swap exhaustion. This makes sense if the swap exhaustion is triggered
due to reactive reclaim but less so if it is triggered due to proactive
reclaim (e.g. one could see OOMs when free memory is ample but anon is
just particularly cold). Therefore, it's desireable to have proactive
reclaim reduce or stop swap-out before the threshold at which OOM
killing occurs.
In the case of Meta's Senpai proactive reclaimer, we adjust vm.swappiness
before writes to memory.reclaim[2]. This has been in production for
nearly two years and has addressed our needs to control proactive vs
reactive reclaim behavior but is still not ideal for a number of reasons:
* vm.swappiness is a global setting, adjusting it can race/interfere
with other system administration that wishes to control vm.swappiness.
In our case, we need to disable Senpai before adjusting vm.swappiness.
* vm.swappiness is stateful - so a crash or restart of Senpai can leave
a misconfigured setting. This requires some additional management to
record the "desired" setting and ensure Senpai always adjusts to it.
With this patch, we avoid these downsides of adjusting vm.swappiness
globally.
[1]https://www.freedesktop.org/software/systemd/man/latest/systemd-oomd.service.html
[2]https://github.com/facebookincubator/oomd/blob/main/src/oomd/plugins/Senpai.cpp#L585-L598
Link: https://lkml.kernel.org/r/20240103164841.2800183-3-schatzberg.dan@gmail.com
Signed-off-by: Dan Schatzberg <schatzberg.dan@gmail.com>
Suggested-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Chris Li <chrisl@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Yue Zhao <findns94@gmail.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Cc: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Add swappiness argument to memory.reclaim", v6.
This patch proposes augmenting the memory.reclaim interface with a
swappiness=<val> argument that overrides the swappiness value for that
instance of proactive reclaim.
Userspace proactive reclaimers use the memory.reclaim interface to trigger
reclaim. The memory.reclaim interface does not allow for any way to
effect the balance of file vs anon during proactive reclaim. The only
approach is to adjust the vm.swappiness setting. However, there are a few
reasons we look to control the balance of file vs anon during proactive
reclaim, separately from reactive reclaim:
* Swapout should be limited to manage SSD write endurance. In near-OOM
situations we are fine with lots of swap-out to avoid OOMs. As these
are typically rare events, they have relatively little impact on write
endurance. However, proactive reclaim runs continuously and so its
impact on SSD write endurance is more significant. Therefore it is
desireable to control swap-out for proactive reclaim separately from
reactive reclaim
* Some userspace OOM killers like systemd-oomd[1] support OOM killing on
swap exhaustion. This makes sense if the swap exhaustion is triggered
due to reactive reclaim but less so if it is triggered due to proactive
reclaim (e.g. one could see OOMs when free memory is ample but anon is
just particularly cold). Therefore, it's desireable to have proactive
reclaim reduce or stop swap-out before the threshold at which OOM
killing occurs.
In the case of Meta's Senpai proactive reclaimer, we adjust vm.swappiness
before writes to memory.reclaim[2]. This has been in production for
nearly two years and has addressed our needs to control proactive vs
reactive reclaim behavior but is still not ideal for a number of reasons:
* vm.swappiness is a global setting, adjusting it can race/interfere
with other system administration that wishes to control vm.swappiness.
In our case, we need to disable Senpai before adjusting vm.swappiness.
* vm.swappiness is stateful - so a crash or restart of Senpai can leave
a misconfigured setting. This requires some additional management to
record the "desired" setting and ensure Senpai always adjusts to it.
With this patch, we avoid these downsides of adjusting vm.swappiness
globally.
Previously, this exact interface addition was proposed by Yosry[3]. In
response, Roman proposed instead an interface to specify precise
file/anon/slab reclaim amounts[4]. More recently Huan also proposed this
as well[5] and others similarly questioned if this was the proper
interface.
Previous proposals sought to use this to allow proactive reclaimers to
effectively perform a custom reclaim algorithm by issuing proactive
reclaim with different settings to control file vs anon reclaim (e.g. to
only reclaim anon from some applications). Responses argued that
adjusting swappiness is a poor interface for custom reclaim.
In contrast, I argue in favor of a swappiness setting not as a way to
implement custom reclaim algorithms but rather to bias the balance of anon
vs file due to differences of proactive vs reactive reclaim. In this
context, swappiness is the existing interface for controlling this balance
and this patch simply allows for it to be configured differently for
proactive vs reactive reclaim.
Specifying explicit amounts of anon vs file pages to reclaim feels
inappropriate for this prupose. Proactive reclaimers are un-aware of the
relative age of file vs anon for a cgroup which makes it difficult to
manage proactive reclaim of different memory pools. A proactive reclaimer
would need some amount of anon reclaim attempts separate from the amount
of file reclaim attempts which seems brittle given that it's difficult to
observe the impact.
[1]https://www.freedesktop.org/software/systemd/man/latest/systemd-oomd.service.html
[2]https://github.com/facebookincubator/oomd/blob/main/src/oomd/plugins/Senpai.cpp#L585-L598
[3]https://lore.kernel.org/linux-mm/CAJD7tkbDpyoODveCsnaqBBMZEkDvshXJmNdbk51yKSNgD7aGdg@mail.gmail.com/
[4]https://lore.kernel.org/linux-mm/YoPHtHXzpK51F%2F1Z@carbon/
[5]https://lore.kernel.org/lkml/20231108065818.19932-1-link@vivo.com/
This patch (of 2):
We use the constants 0 and 200 in a few places in the mm code when
referring to the min and max swappiness. This patch adds MIN_SWAPPINESS
and MAX_SWAPPINESS #defines to improve clarity. There are no functional
changes.
Link: https://lkml.kernel.org/r/20240103164841.2800183-1-schatzberg.dan@gmail.com
Link: https://lkml.kernel.org/r/20240103164841.2800183-2-schatzberg.dan@gmail.com
Signed-off-by: Dan Schatzberg <schatzberg.dan@gmail.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Chris Li <chrisl@kernel.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Tejun Heo <tj@kernel.org>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Yue Zhao <findns94@gmail.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Put legacy cgroup v1 memory controller code under a new CONFIG_MEMCG_V1
config option. The option is turned off by default. Nobody except those
who are still using cgroup v1 should turn it on.
If the option is not set, memory controller can still be mounted under
cgroup v1, but none of memcg-specific control files are present.
Please note, that not all cgroup v1's memory controller code is guarded
yet (but most of it), it's a subject for some follow-up work.
Thanks to Michal Hocko for providing a better Kconfig option description.
[roman.gushchin@linux.dev: better config option description provided by Michal]
Link: https://lkml.kernel.org/r/ZnxXNtvqllc9CDoo@google.com
Link: https://lkml.kernel.org/r/20240625005906.106920-14-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Group all cgroup v1-related declarations at the end of memcontrol.h and
mm/memcontrol-v1.h with an intention to put them all together under a
config option later on. It should make things easier to follow and
maintain too.
Link: https://lkml.kernel.org/r/20240625005906.106920-13-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
memcg1_update_tree() is not used outside of mm/memcontrol-v1.c anymore,
define it as static and remove the declaration from the header file.
Link: https://lkml.kernel.org/r/20240625005906.106920-12-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Rename memcg_oom_recover() into memcg1_oom_recover() for consistency with
other memory cgroup v1-related functions.
Move the declaration in mm/memcontrol-v1.h to be nearby other memcg v1 oom
handling functions.
Link: https://lkml.kernel.org/r/20240625005906.106920-10-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cgroup v1 supports a complicated OOM handling in userspace mechanism,
which is not supported by cgroup v2. Let's move the corresponding code
into memcontrol-v1.c.
Aside from mechanical code movement this patch introduces two new
functions: memcg1_oom_prepare() and memcg1_oom_finish(). Those are
implementing cgroup v1-specific parts of the common memcg OOM handling
path.
Link: https://lkml.kernel.org/r/20240625005906.106920-9-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Rename memcg_check_events() into memcg1_check_events() for consistency
with other cgroup v1-specific functions.
Link: https://lkml.kernel.org/r/20240625005906.106920-8-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cgroup v1's memory controller contains a pretty complicated event
notifications mechanism which is not used on cgroup v2. Let's move the
corresponding code into memcontrol-v1.c.
Please, note, that mem_cgroup_event_ratelimit() remains in memcontrol.c,
otherwise it would require exporting too many details on memcg stats
outside of memcontrol.c.
Link: https://lkml.kernel.org/r/20240625005906.106920-7-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Rename exported function related to the charge move to have the memcg1_
prefix.
Link: https://lkml.kernel.org/r/20240625005906.106920-6-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Unlike the legacy cgroup v1 memory controller, cgroup v2 memory controller
doesn't support moving charged pages between cgroups.
It's a fairly large and complicated code which created a number of
problems in the past. Let's move this code into memcontrol-v1.c. It
shaves off 1k lines from memcontrol.c. It's also another step towards
making the legacy memory controller code optionally compiled.
Link: https://lkml.kernel.org/r/20240625005906.106920-5-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Rename exported function related to the softlimit reclaim to have memcg1_
prefix.
Link: https://lkml.kernel.org/r/20240625005906.106920-4-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Soft limits are cgroup v1-specific and are not supported by cgroup v2, so
let's move the corresponding code into memcontrol-v1.c.
Aside from simple moving the code, this commits introduces a trivial
memcg1_soft_limit_reset() function to reset soft limits and also moves the
global soft limit tree initialization code into a new memcg1_init()
function.
It also moves corresponding declarations shared between memcontrol.c and
memcontrol-v1.c into mm/memcontrol-v1.h.
Link: https://lkml.kernel.org/r/20240625005906.106920-3-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: memcg: separate legacy cgroup v1 code and put under
config option", v2.
Cgroups v2 have been around for a while and many users have fully adopted
them, so they never use cgroups v1 features and functionality. Yet they
have to "pay" for the cgroup v1 support anyway:
1) the kernel binary contains an unused cgroup v1 code,
2) some code paths have additional checks which are not needed,
3) some common structures like task_struct and mem_cgroup contain unused
cgroup v1-specific members.
Cgroup v1's memory controller has a number of features that are not
supported by cgroup v2 and their implementation is pretty much self
contained. Most notably, these features are: soft limit reclaim, oom
handling in userspace, complicated event notification system, charge
migration. Cgroup v1-specific code in memcontrol.c is close to 4k lines
in size and it's intervened with generic and cgroup v2-specific code.
It's a burden on developers and maintainers.
This patchset aims to solve these problems by:
1) moving cgroup v1-specific memcg code to the new mm/memcontrol-v1.c file,
2) putting definitions shared by memcontrol.c and memcontrol-v1.c into the
mm/memcontrol-v1.h header,
3) introducing the CONFIG_MEMCG_V1 config option, turned off by default,
4) making memcontrol-v1.c to compile only if CONFIG_MEMCG_V1 is set.
If CONFIG_MEMCG_V1 is not set, cgroup v1 memory controller is still available
for mounting, however no memory-specific control knobs are present.
This patch (of 14):
This patch introduces the mm/memcontrol-v1.c source file which will be
used for all legacy (cgroup v1) memory cgroup code. It also introduces
mm/memcontrol-v1.h to keep declarations shared between mm/memcontrol.c and
mm/memcontrol-v1.c.
As of now, let's compile it if CONFIG_MEMCG is set, similar to
mm/memcontrol.c. Later on it can be switched to use a separate config
option, so that the legacy code won't be compiled if not required.
Link: https://lkml.kernel.org/r/20240625005906.106920-1-roman.gushchin@linux.dev
Link: https://lkml.kernel.org/r/20240625005906.106920-2-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Now the implementation of stable_node_dup() causes chain()/chain_prune()
interfaces and usages are overcomplicated.
Why? stable_node_dup() only find and return a candidate stable_node for
sharing, so the users have to recheck using stable_node_dup_any() if any
non-candidate stable_node exist. And try to ksm_get_folio() from it
again.
Actually, stable_node_dup() can just return a best stable_node as it can,
then the users can check if it's a candidate for sharing or not.
The code is simplified too and fewer corner cases: such as stable_node and
stable_node_dup can't be NULL if returned tree_folio is not NULL.
Link: https://lkml.kernel.org/r/20240621-b4-ksm-scan-optimize-v2-3-1c328aa9e30b@linux.dev
Signed-off-by: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Stefan Roesch <shr@devkernel.io>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The code flow in cmp_and_merge_page() is suboptimal for handling the ksm
page and non-ksm page at the same time. For example:
- ksm page
1. Mostly just return if this ksm page is not migrated and this rmap_item
has been on the rmap hlist. Or we have to fix this rmap_item mapping.
2. But we absolutely don't need to checksum for this ksm page, since it
can't change.
- non-ksm page
1. First don't need to waste time searching stable tree if fast changing.
2. Should try to merge with zero page before search the stable tree.
3. Then search stable tree to find mergeable ksm page.
This patch optimizes the code flow so the handling differences between ksm
page and non-ksm page become clearer and more efficient too.
Link: https://lkml.kernel.org/r/20240621-b4-ksm-scan-optimize-v2-2-1c328aa9e30b@linux.dev
Signed-off-by: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Stefan Roesch <shr@devkernel.io>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/ksm: cmp_and_merge_page() optimizations and cleanup", v2.
This series mainly optimizes cmp_and_merge_page() to have more efficient
separate code flow for ksm page and non-ksm anon page.
- ksm page: don't need to calculate the checksum obviously.
- anon page: don't need to search stable tree if changing fast and try
to merge with zero page before searching ksm page on stable tree.
Please see the patch-2 for details.
Patch-3 is cleanup also a little optimization for the chain()/chain_prune
interfaces, which made the stable_tree_search()/stable_tree_insert() over
complex.
I have done simple testing using "hackbench -g 1 -l 300000" (maybe I need
to use a better workload) on my machine, have seen a little CPU usage
decrease of ksmd and some improvements of cmp_and_merge_page() latency:
We can see the latency of cmp_and_merge_page() when handling non-ksm anon
pages has been improved.
This patch (of 3):
In preparation for later changes, refactor out a new function called
try_to_merge_with_zero_page(), which tries to merge with zero page.
Link: https://lkml.kernel.org/r/20240621-b4-ksm-scan-optimize-v2-0-1c328aa9e30b@linux.dev
Link: https://lkml.kernel.org/r/20240621-b4-ksm-scan-optimize-v2-1-1c328aa9e30b@linux.dev
Signed-off-by: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Stefan Roesch <shr@devkernel.io>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When trying to allocate a hugepage with no reserved ones free, it may be
allowed in case a number of overcommit hugepages was configured (using
/proc/sys/vm/nr_overcommit_hugepages) and that number wasn't reached.
This allows for a behavior of having extra hugepages allocated
dynamically, if there're resources for it. Some sysadmins even prefer not
reserving any hugepages and setting a big number of overcommit hugepages.
But while attempting to allocate overcommit hugepages in a multi node
system (either NUMA or mempolicy/cpuset) said allocations might randomly
fail even when there're resources available for the allocation.
This happens due to allowed_mems_nr() only accounting for the number of
free hugepages in the nodes the current process belongs to and the surplus
hugepage allocation is done so it can be allocated in any node. In case
one or more of the requested surplus hugepages are allocated in a
different node, the whole allocation will fail due allowed_mems_nr()
returning a lower value.
So allocate surplus hugepages in one of the nodes the current process
belongs to.
Easy way to reproduce this issue is to use a 2+ NUMA nodes system:
# echo 0 >/proc/sys/vm/nr_hugepages
# echo 1 >/proc/sys/vm/nr_overcommit_hugepages
# numactl -m0 ./tools/testing/selftests/mm/map_hugetlb 2
Repeating the execution of map_hugetlb test application will eventually
fail when the hugepage ends up allocated in a different node.
[aris@ruivo.org: v2]
Link: https://lkml.kernel.org/r/20240701212343.GG844599@cathedrallabs.org
Link: https://lkml.kernel.org/r/20240621190050.mhxwb65zn37doegp@redhat.com
Signed-off-by: Aristeu Rozanski <aris@redhat.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Aristeu Rozanski <aris@ruivo.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Vishal Moola <vishal.moola@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The variable is supposed to be set via later migrate_pages() call.
However, the function does not do that when CONFIG_MIGRATION is unset.
Initialize the variable to zero.
Link: https://lkml.kernel.org/r/20240701165332.47495-1-sj@kernel.org
Fixes: 5311c0a2ee ("mm/damon/paddr: introduce DAMOS_MIGRATE_COLD action for demotion")
Signed-off-by: SeongJae Park <sj@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202406251102.GE07hqfQ-lkp@intel.com/
Cc: Honggyu Kim <honggyu.kim@sk.com>
Cc: Hyeongtak Ji <hyeongtak.ji@sk.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Folios of order <= 1 are not in deferred list, the check of order is added
into folio_undo_large_rmappable() from commit 8897277acf ("mm: support
order-1 folios in the page cache"), but there is a repeated check for
small folio (order 0) during each call of the
folio_undo_large_rmappable(), so only keep folio_order() check inside the
function.
In addition, move all the checks into header file to save a function call
for non-large-rmappable or empty deferred_list folio.
Link: https://lkml.kernel.org/r/20240521130315.46072-1-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
User could update max_nr_regions parameter while DAMON is running to a
value that smaller than the current number of regions that DAMON is
seeing. Such update could be done for reducing the monitoring overhead.
In the case, DAMON should merge regions aggressively more than normal
situation to ensure the new limit is successfully applied. Implement a
kselftest to ensure that.
Link: https://lkml.kernel.org/r/20240625180538.73134-9-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Users can update DAMON parameters while it is running, using 'commit'
DAMON sysfs interface command. For testing the feature in future tests,
implement a function for doing that on the test-purpose DAMON sysfs
interface wrapper Python module.
Link: https://lkml.kernel.org/r/20240625180538.73134-8-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Implement a kselftest for DAMON's {min,max}_nr_regions' parameters. The
test ensures both the minimum and the maximum number of regions limit is
respected even if the workload's real number of regions is less than the
minimum or larger than the maximum limits.
Link: https://lkml.kernel.org/r/20240625180538.73134-7-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Implement DAMON stop function on the test-purpose DAMON sysfs interface
wrapper Python module, _damon_sysfs.py. This feature will be used by
future DAMON tests that need to start/stop DAMON multiple times.
Link: https://lkml.kernel.org/r/20240625180538.73134-6-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Implement a test for DAMOS tried regions command of DAMON sysfs interface.
It ensures the expected number of monitoring regions are created using an
artificial memory access pattern generator program.
Link: https://lkml.kernel.org/r/20240625180538.73134-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
To test schemes_tried_regions feature, we need to have a program having
specific number of regions that having different access pattern. Existing
artificial access pattern generator, 'access_memory', cannot be used for
the purpose, since it accesses only one region at a given time. Extending
it could be an option, but since the purpose and the implementation are
pretty simple, implementing another one from the scratch is better.
Implement such another artificial memory access program that allocates
user-defined number/size regions and accesses even-numbered regions.
Link: https://lkml.kernel.org/r/20240625180538.73134-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Implement schemes_update_tried_regions DAMON sysfs command on
_damon_sysfs.py, to use on implementations of future tests for the
feature.
Link: https://lkml.kernel.org/r/20240625180538.73134-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "selftests/damon: test DAMOS tried regions and
{min,max}_nr_regions".
This patch series fix a minor issue in a program for DAMON selftest, and
implement new functionality selftests for DAMOS tried regions and
{min,max}_nr_regions. The test for max_nr_regions also test the recovery
from online tuning-caused limit violation, which was fixed by a previous
patch [1] titled "mm/damon/core: merge regions aggressively when
max_nr_regions is unmet".
The first patch fixes a minor problem in the articial memory access
pattern generator for tests. Following 3 patches (2-4) implement schemes
tried regions test. Then a couple of patches (5-6) implementing static
setup based {min,max}_nr_regions functionality test follows. Final two
patches (7-8) implement dynamic max_nr_regions update test.
[1] https://lore.kernel.org/20240624210650.53960C2BBFC@smtp.kernel.org
This patch (of 8):
'access_memory' is an artificial memory access pattern generator for DAMON
tests. It creates and accesses memory regions that the user specified the
number and size via the command line. However, real access part of the
program ignores the user-specified size of each region. Instead, it uses
a hard-coded value, 10 MiB. Fix it to use user-defined size.
Note that all existing 'access_memory' users are setting the region size
as 10 MiB. Hence no real problem has happened so far.
Link: https://lkml.kernel.org/r/20240625180538.73134-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20240625180538.73134-2-sj@kernel.org
Fixes: b5906f5f73 ("selftests/damon: add a test for update_schemes_tried_regions sysfs command")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Unify all conditions for initial readahead to simplify goto logic in
page_cache_sync_ra(). No functional changes.
Link: https://lkml.kernel.org/r/20240625101909.12234-10-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: Zhang Peng <zhangpengpeng0808@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
try_context_readahead() has a single caller page_cache_sync_ra(). Fold
the function there to make ra state modifications more obvious. No
functional changes.
Link: https://lkml.kernel.org/r/20240625101909.12234-9-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: Zhang Peng <zhangpengpeng0808@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Both async and sync readahead are handled by ondemand_readahead()
function. However there isn't actually much in common. Just move async
related parts into page_cache_ra_async() and sync related parts to
page_cache_ra_sync(). No functional changes.
Link: https://lkml.kernel.org/r/20240625101909.12234-8-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: Zhang Peng <zhangpengpeng0808@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
ondemand_readahead() scales up the readahead window if the current read
would hit the readahead mark placed by itself. However the condition is
mostly dead code because:
a) In case of async readahead we always increase ra->start so ra->start
== index is never true.
b) In case of sync readahead we either go through
try_context_readahead() in which case ra->async_size == 1 < ra->size or
we go through initial_readahead where ra->async_size == ra->size iff
ra->size == max_pages.
So the only practical effect is reducing async_size for large initial
reads. Make the code more obvious.
Link: https://lkml.kernel.org/r/20240625101909.12234-7-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: Zhang Peng <zhangpengpeng0808@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
page_cache_ra_order() scales folio order down so that is fully fits within
readahead window. Thus the code handling the case where we walked past
the readahead window is a dead code. Remove it.
Link: https://lkml.kernel.org/r/20240625101909.12234-6-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: Zhang Peng <zhangpengpeng0808@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The index argument of page_cache_async_readahead() is just folio->index so
there's no point in passing is separately. Drop it.
Link: https://lkml.kernel.org/r/20240625101909.12234-5-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: Zhang Peng <zhangpengpeng0808@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Current index to readahead is tracked in readahead_control and properly
updated by page_cache_ra_unbounded() (read_pages() in fact). So there's
no need to track the index separately in force_page_cache_ra().
Link: https://lkml.kernel.org/r/20240625101909.12234-4-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: Zhang Peng <zhangpengpeng0808@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When we succeed in creating some folios in page_cache_ra_order() but then
need to fallback to single page folios, we don't shorten the amount to
read passed to do_page_cache_ra() by the amount we've already read. This
then results in reading more and also in placing another readahead mark in
the middle of the readahead window which confuses readahead code. Fix the
problem by properly reducing number of pages to read.
Link: https://lkml.kernel.org/r/20240625101909.12234-3-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: Zhang Peng <zhangpengpeng0808@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
page_cache_next_miss() should return value outside of the specified range
when no hole is found. However currently it will return the last index
*in* the specified range confusing ondemand_readahead() to think there's a
hole in the searched range and upsetting readahead logic.
Link: https://lkml.kernel.org/r/20240625101909.12234-2-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: Zhang Peng <zhangpengpeng0808@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: Fix various readahead quirks".
When we were internally testing performance of recent kernels, we have
noticed quite variable performance of readahead arising from various
quirks in readahead code. So I went on a cleaning spree there. This is a
batch of patches resulting out of that. A quick testing in my test VM
with the following fio job file:
[global]
direct=0
ioengine=sync
invalidate=1
blocksize=4k
size=10g
readwrite=read
[reader]
numjobs=1
shows that this patch series improves the throughput from variable one in
310-340 MB/s range to rather stable one at 350 MB/s. As a side effect
these cleanups also address the issue noticed by Bruz Zhang [1].
[1] https://lore.kernel.org/all/20240618114941.5935-1-zhangpengpeng0808@gmail.com/
Zhang Peng reported:
: I test this batch of patch with fio, it indeed has a huge sppedup
: in sequential read when block size is 4KiB. The result as follow,
: for async read, iodepth is set to 128, and other settings
: are self-evident.
:
: casename upstream withFix speedup
: ---------------- -------- -------- -------
: randread-4k-sync 48991 47
: seqread-4k-sync 1162758 14229
: seqread-1024k-sync 1460208 1452522
: randread-4k-libaio 47467 4730
: randread-4k-posixaio 49190 49512
: seqread-4k-libaio 1085932 1234635
: seqread-1024k-libaio 1423341 1402214 -1
: seqread-4k-posixaio 1165084 1369613 1
: seqread-1024k-posixaio 1435422 1408808 -1.8
This patch (of 10):
page_cache_sync_ra() is called when a folio we want to read is not in the
page cache. It is expected that it creates the folio (and perhaps the
following folios as well) and submits reads for them unless some error
happens. However if index == ra->start + ra->size, ondemand_readahead()
will treat the call as another async readahead hit. Thus ra->start will
be advanced and we create pages and queue reads from ra->start + ra->size
further. Consequentially the page at 'index' is not created and
filemap_get_pages() has to always go through filemap_create_folio() path.
This behavior has particularly unfortunate consequences when we have two
IO threads sequentially reading from a shared file (as is the case when
NFS serves sequential reads). In that case what can happen is:
suppose ra->size == ra->async_size == 128, ra->start = 512
T1 T2
reads 128 pages at index 512
- hits async readahead mark
filemap_readahead()
ondemand_readahead()
if (index == expected ...)
ra->start = 512 + 128 = 640
ra->size = 128
ra->async_size = 128
page_cache_ra_order()
blocks in ra_alloc_folio()
reads 128 pages at index 640
- no page found
page_cache_sync_readahead()
ondemand_readahead()
if (index == expected ...)
ra->start = 640 + 128 = 768
ra->size = 128
ra->async_size = 128
page_cache_ra_order()
submits reads from 768
- still no page found at index 640
filemap_create_folio()
- goes on to index 641
page_cache_sync_readahead()
ondemand_readahead()
- founds ra is confused,
trims is to small size
finds pages were already inserted
And as a result read performance suffers.
Fix the problem by triggering async readahead case in ondemand_readahead()
only if we are calling the function because we hit the readahead marker.
In any other case we need to read the folio at 'index' and thus we cannot
really use the current ra state.
Note that the above situation could be viewed as a special case of
file->f_ra state corruption. In fact two thread reading using the shared
file can also seemingly corrupt file->f_ra in interesting ways due to
concurrent access. I never saw that in practice and the fix is going to
be much more complex so for now at least fix this practical problem while
we ponder about the theoretically correct solution.
Link: https://lkml.kernel.org/r/20240625100859.15507-1-jack@suse.cz
Link: https://lkml.kernel.org/r/20240625101909.12234-1-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: Zhang Peng <zhangpengpeng0808@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently we always take a folio reference even if migration will not even
be tried or isolation failed, requiring us to grab+drop an additional
reference.
Further, we end up calling folio_likely_mapped_shared() while the folio
might have already been unmapped, because after we dropped the PTL, that
can easily happen. We want to stop touching mapcounts and friends from
such context, and only call folio_likely_mapped_shared() while the folio
is still mapped: mapcount information is pretty much stale and unreliable
otherwise.
So let's move checks into numamigrate_isolate_folio(), rename that
function to migrate_misplaced_folio_prepare(), and call that function from
callsites where we call migrate_misplaced_folio(), but still with the PTL
held.
We can now stop taking temporary folio references, and really only take a
reference if folio isolation succeeded. Doing the
folio_likely_mapped_shared() + folio isolation under PT lock is now
similar to how we handle MADV_PAGEOUT.
While at it, combine the folio_is_file_lru() checks.
[david@redhat.com: fix list_del() corruption]
Link: https://lkml.kernel.org/r/8f85c31a-e603-4578-bf49-136dae0d4b69@redhat.com
Link: https://lkml.kernel.org/r/20240626191129.658CFC32782@smtp.kernel.org
Link: https://lkml.kernel.org/r/20240620212935.656243-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Tested-by: Donet Tom <donettom@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/migrate: move NUMA hinting fault folio isolation + checks
under PTL".
Let's just return 0 on success, which is less confusing.
... especially because we got it wrong in the migrate.h stub where we
have "return -EAGAIN; /* can't migrate now */" instead of "return 0;".
Likely this wrong return value doesn't currently matter, but it certainly
adds confusion.
We'll add migrate_misplaced_folio_prepare() next, where we want to use the
same "return 0 on success" approach, so let's just clean this up.
Link: https://lkml.kernel.org/r/20240620212935.656243-1-david@redhat.com
Link: https://lkml.kernel.org/r/20240620212935.656243-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Donet Tom <donettom@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit 2b5067a814 ("mm: mmap_lock: add tracepoints around lock
acquisition") introduced TRACE_MMAP_LOCK_EVENT() macro using
preempt_disable() in order to let get_mm_memcg_path() return a percpu
buffer exclusively used by normal, softirq, irq and NMI contexts
respectively.
Commit 832b507253 ("mm: mmap_lock: use local locks instead of disabling
preemption") replaced preempt_disable() with local_lock(&memcg_paths.lock)
based on an argument that preempt_disable() has to be avoided because
get_mm_memcg_path() might sleep if PREEMPT_RT=y.
But syzbot started reporting
inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage.
and
inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
messages, for local_lock() does not disable IRQ.
We could replace local_lock() with local_lock_irqsave() in order to
suppress these messages. But this patch instead replaces percpu buffers
with on-stack buffer, for the size of each buffer returned by
get_memcg_path_buf() is only 256 bytes which is tolerable for allocating
from current thread's kernel stack memory.
Link: https://lkml.kernel.org/r/ef22d289-eadb-4ed9-863b-fbc922b33d8d@I-love.SAKURA.ne.jp
Reported-by: syzbot <syzbot+40905bca570ae6784745@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=40905bca570ae6784745
Fixes: 832b507253 ("mm: mmap_lock: use local locks instead of disabling preemption")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Axel Rasmussen <axelrasmussen@google.com>
Cc: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
sparse complains that __user pointers are being passed to functions that
expect non-__user ones. In all cases, these functions are in fact working
with user pointers, only the tag is missing. Add it.
Link: https://lkml.kernel.org/r/20240627145754.27333-2-iii@linux.ibm.com
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202406272033.KejtfLkw-lkp@intel.com/
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
