The comment refers to drm_irq_install() et al, which are not used by
omapdrm. The functions are part of the DRM IRQ midlayer and shouldn't
be used any longer. Remove the comment.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210706073125.7689-1-tzimmermann@suse.de
Replace usage of struct drm_device.irq_enabled with the driver's
own state field struct omap_drm_device.irq_enabled. The field in
the DRM device structure is considered legacy and should not be
used by KMS drivers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-16-tzimmermann@suse.de
I guess no one ever tried running omap together with lima or panfrost,
not even sure that's possible. Anyway for consistency, fix this.
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Tomi Valkeinen <tomba@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210622165511.3169559-12-daniel.vetter@ffwll.ch
msm-next pull request has a baseline with stuff from -fixes, roll
forward first.
Some simple conflicts in amdgpu, ttm and one in i915 where git gets
confused and tries to add the same function twice.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
struct dss_device has been declared. Remove the duplicate.
And sort these forward declarations alphabetically.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325111028.864628-1-wanjiabing@vivo.com
fixed the following coccicheck:
./drivers/gpu/drm/omapdrm/dss/dsi.c:4329:7-27: ERROR: Threaded IRQ with
no primary handler requested without IRQF_ONESHOT
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Fixes: 4c1b935fea ("drm/omap: dsi: move TE GPIO handling into core")
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1616492093-68237-1-git-send-email-yang.lee@linux.alibaba.com
An old patch added a 'return' statement after each BUG() in this driver,
which was necessary at the time, but has become redundant after the BUG()
definition was updated to handle this properly.
gcc-11 now warns about one such instance, where the 'return' statement
was incorrectly indented:
drivers/gpu/drm/omapdrm/dss/dispc.c: In function ‘pixinc’:
drivers/gpu/drm/omapdrm/dss/dispc.c:2093:9: error: this ‘else’ clause does not guard... [-Werror=misleading-indentation]
2093 | else
| ^~~~
drivers/gpu/drm/omapdrm/dss/dispc.c:2095:17: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘else’
2095 | return 0;
| ^~~~~~
Address this by removing the return again and changing the BUG()
to be unconditional to make this more intuitive.
Fixes: c6eee968d4 ("OMAPDSS: remove compiler warnings when CONFIG_BUG=n")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210322164203.827324-1-arnd@kernel.org
r is "u32" always >= 0,mipi_dsi_create_packet may return little than zero.
so r < 0 condition is never accessible.
Fixes coccicheck warnings:
./drivers/gpu/drm/omapdrm/dss/dsi.c:2155:5-6:
WARNING: Unsigned expression compared with zero: r < 0
Signed-off-by: Junlin Yang <yangjunlin@yulong.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210312071445.1721-1-angkery@163.com
Many drivers reference the plane->state pointer in order to get the
current plane state in their atomic_update or atomic_disable hooks,
which would be the new plane state in the global atomic state since
_swap_state happened when those hooks are run.
Use the drm_atomic_get_new_plane_state helper to get that state to make it
more obvious.
This was made using the coccinelle script below:
@ plane_atomic_func @
identifier helpers;
identifier func;
@@
(
static const struct drm_plane_helper_funcs helpers = {
...,
.atomic_disable = func,
...,
};
|
static const struct drm_plane_helper_funcs helpers = {
...,
.atomic_update = func,
...,
};
)
@ adds_new_state @
identifier plane_atomic_func.func;
identifier plane, state;
identifier new_state;
@@
func(struct drm_plane *plane, struct drm_atomic_state *state)
{
...
- struct drm_plane_state *new_state = plane->state;
+ struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state, plane);
...
}
@ include depends on adds_new_state @
@@
#include <drm/drm_atomic.h>
@ no_include depends on !include && adds_new_state @
@@
+ #include <drm/drm_atomic.h>
#include <drm/...>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20210219120032.260676-1-maxime@cerno.tech
The current atomic helpers have either their object state being passed as
an argument or the full atomic state.
The former is the pattern that was done at first, before switching to the
latter for new hooks or when it was needed.
Let's convert all the remaining helpers to provide a consistent
interface, starting with the planes atomic_check.
The conversion was done using the coccinelle script below plus some
manual changes for vmwgfx, built tested on all the drivers.
@@
identifier plane, plane_state;
symbol state;
@@
struct drm_plane_helper_funcs {
...
int (*atomic_check)(struct drm_plane *plane,
- struct drm_plane_state *plane_state);
+ struct drm_atomic_state *state);
...
}
@ plane_atomic_func @
identifier helpers;
identifier func;
@@
static const struct drm_plane_helper_funcs helpers = {
...,
.atomic_check = func,
...,
};
@@
struct drm_plane_helper_funcs *FUNCS;
identifier f;
identifier dev;
identifier plane, plane_state, state;
@@
f(struct drm_device *dev, struct drm_atomic_state *state)
{
<+...
- FUNCS->atomic_check(plane, plane_state)
+ FUNCS->atomic_check(plane, state)
...+>
}
@ ignores_new_state @
identifier plane_atomic_func.func;
identifier plane, new_plane_state;
@@
func(struct drm_plane *plane, struct drm_plane_state *new_plane_state)
{
... when != new_plane_state
}
@ adds_new_state depends on plane_atomic_func && !ignores_new_state @
identifier plane_atomic_func.func;
identifier plane, new_plane_state;
@@
func(struct drm_plane *plane, struct drm_plane_state *new_plane_state)
{
+ struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state, plane);
...
}
@ depends on plane_atomic_func @
identifier plane_atomic_func.func;
identifier plane, new_plane_state;
@@
func(struct drm_plane *plane,
- struct drm_plane_state *new_plane_state
+ struct drm_atomic_state *state
)
{ ... }
@ include depends on adds_new_state @
@@
#include <drm/drm_atomic.h>
@ no_include depends on !include && adds_new_state @
@@
+ #include <drm/drm_atomic.h>
#include <drm/...>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-4-maxime@cerno.tech
Nothing special, just put the end right after hw_done(). Note that in
one path there's a wait for the flip/update to complete. But as far as
I understand from comments and code that's only relevant for modesets,
and skipped if there wasn't a modeset done on a given crtc.
For a bit more clarity pull the hw_done() call out of the if/else,
that way it's a bit clearer flow. But happy to shuffle this around as
is seen fit.
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210121152959.1725404-9-daniel.vetter@ffwll.ch
The 'r' in dsi_vc_send_short() is of type 'unsigned int', so the
'r < 0' can't be true.
Fix this by introducing a 'err' of type 'int' insteaded.
Fixes: 1ed6253856 ("drm/omap: dsi: switch dsi_vc_send_long/short to mipi_dsi_msg")
Signed-off-by: Menglong Dong <dong.menglong@zte.com.cn>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210127015117.23267-1-dong.menglong@zte.com.cn
Panel drivers can send DSI commands in panel's prepare(), which happens
before the bridge's enable() is called. The OMAP DSI driver currently
only sets up the DSI interface at bridge's enable(), so prepare() cannot
be used to send DSI commands.
This patch fixes the issue by making it possible to enable the DSI
interface any time a command is about to be sent. Disabling the
interface is be done via delayed work.
Clarifications for the delayed disable work and the panel doing DSI
transactions:
bridge_enable: If the disable callback is called just before
bridge_enable takes the dsi_bus_lock, no problem, bridge_enable just
enables the interface again. If the callback is ran just after
bridge_enable's dsi_bus_unlock, no problem, dsi->video_enabled == true
so the callback does nothing.
bridge_disable: similar to bridge-enable, the callback won't do anything
if video_enabled == true, and after bridge-disable has turned the video
and the interface off, there's nothing to do for the callback.
omap_dsi_host_detach: this is called when the panel does
mipi_dsi_detach(), and we expect the panel to _not_ do any DSI
transactions after (or during) mipi_dsi_detatch(), so there are no
race conditions.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-85-tomi.valkeinen@ti.com
We only need to set VC_CTRL:DCS_CMD_ENABLE for command mode panels when
the HW has DSI_QUIRK_DCS_CMD_CONFIG_VC quirk. The old code did this
right by accident, but now we set DCS_CMD_ENABLE for video mode panels
too.
Fix this by skipping the set for video mode.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-84-tomi.valkeinen@ti.com
ULPS is a niche power-saving feature which only really affects command
mode panels showing a static picture. I know the ULPS code used to work
very long time ago, but I could not get it working with the current
driver. As the ULPS code is not trivial and includes delayed work (so
lots of chances for race issues), and just keeping DSI video and command
mode panels working has been challenging enough even without ULPS, lets
remove ULPS support.
When the DSI driver works reliably for command and video mode displays,
someone interested can work on ULPS and add it back if the power saving
is substantial enough.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-83-tomi.valkeinen@ti.com
The driver ignores MIPI_DSI_CLOCK_NON_CONTINUOUS, and always uses
non-continuous clock.
Fix this by using MIPI_DSI_CLOCK_NON_CONTINUOUS and at the same time,
drop ddr_clk_always_on field which seems pretty useless.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-82-tomi.valkeinen@ti.com
Clean up the code by separating video-mode enable/disable code into
functions of their own.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-81-tomi.valkeinen@ti.com
The function names have evolved to be very confusing, and bunch of them
have "display" in them even if the function doesn't deal with display as
such (e.g. dsi_display_enable which just enables the DSI interface).
Rename them by dropping the "display".
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-79-tomi.valkeinen@ti.com
We can drop dsi_display_disable() which just calls
_dsi_display_disable(), and rename _dsi_display_disable() to
dsi_display_disable().
The WARN_ON(!dsi_bus_is_locked(dsi)) in dsi_display_disable is extra and
can be dropped, as _dsi_display_disable() has the same WARN_ON().
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-78-tomi.valkeinen@ti.com
We can drop dsi_display_enable(), which just calls
_dsi_display_enable(), and rename _dsi_display_enable() to
dsi_display_enable().
The WARN_ON(!dsi_bus_is_locked(dsi)) in dsi_display_enable is extra and
can be dropped, as _dsi_display_enable() has the same WARN_ON().
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-77-tomi.valkeinen@ti.com
Clean up the code by inlining dsi_enable_video_outputs and
dsi_disable_video_outputs functions.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-76-tomi.valkeinen@ti.com
Move structs and defines to a private dsi.h header file to make dsi.c a
bit easier to navigate. Also move the (now) private structs and defines
from omapdss.h to dsi.h.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-75-tomi.valkeinen@ti.com
For command mode panels we can use a single VC for sending command and
video data, even if we have to change the data source for that VC when
going from command to video or vice versa.
However, with video mode panels we want to keep the pixel data VC
enabled, and use another VC for command data, and the commands will get
interleaved into the pixel data.
This patch makes the driver use VC0 for commands and VC1 for video.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-71-tomi.valkeinen@ti.com
We currently use a single VC for sending commands and pixel data. The
LP/HS mode for pixel data is correctly set to HS by accident, as we have
set the VC to HS already earlier.
However, if we use a different VC for video data, the VC is in LP mode.
Fix this by always enabling HS mode before starting a frame update.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-70-tomi.valkeinen@ti.com
Simplify and optimize dsi_vc_enable_hs() so that it can be called
without checking the current HS/LP mode. Make dsi_vc_enable_hs() return
if the VC is already in the correct mode.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-69-tomi.valkeinen@ti.com
DSI virtual channel and hardware VC blocks have gotten tangled as
described in the previous commits. This has not caused any issues, as
the value for both is 0, so it happens to work.
To fix the issue, change the code to use the correct one of the two.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-68-tomi.valkeinen@ti.com
To start fixing the issues related to channels and vcs described in the
previous commit, pass vc and/or channel to various functions which will
need it do properly handle different DSI channels and VCs.
No functional changes.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-67-tomi.valkeinen@ti.com
The "channel" usage in omap dsi driver is confusing. We have three
different "channels":
1) DSI virtual channel ID. This is a number from 0 to 3, included in the
packet payload.
2) VC. This is a register block in the DSI IP. There are four of those
blocks. A VC is a DSI "pipeline", with defined fifo settings, data
source (cpu or dispc), and some other settings. It has no relation to
the 1).
3) dispc channel. It's the "pipeline" number dispc uses to send pixel
data.
The previous patch handled the third case.
To start fixing 1) and 2), we first rename all uses of 'channel' to
'vc', as in most of the cases that is the correct thing to use.
However, in some places 1) and 2) have gotten mixed up (i.e. the code
uses msg->channel when it should use vc), which will be fixed in the
following patch.
Note that mixing 1) and 2) currently is "fine", as at the moment we only
support DSI peripherals with DSI virtual channel 0, and we always use
VC0 to send data. So both 1) and 2) are always 0.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-66-tomi.valkeinen@ti.com
The "channel" usage in omap dsi driver is confusing. As the first step,
change "channel" to "dispc_channel" when dealing with the dispc channel.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-65-tomi.valkeinen@ti.com
A DSI peripheral can have virtual channel ID of 0-3. This should be
always the case, and there's no need in the driver to validate the
channel.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-64-tomi.valkeinen@ti.com
The VC handling has gotten quite tangled up. As the first step to clean
it up, lets define that we only support a single DSI peripheral (which
was really already the case), and we always use VC0 (define VC_DEFAULT
0) register block to send data to the peripheral.
We can thus have a single mipi_dsi_device pointer and remove the
for-loops which made passes over all the four VCs (just the first one
was ever used).
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-63-tomi.valkeinen@ti.com
The OMAP DSI command mode panel driver used to send page & column
address before each frame update, and this code was moved into the DSI
host driver when converting it to the DRM bridge model.
However, it's not really required to send the page & column address
before each frame. It's also something that doesn't really belong to the
DSI host driver, so we should drop the code.
That said, frame updates break if we don't send _something_ between the
frames. A NOP command does the trick.
It is not clear if this behavior is as expected from a DSI command mode
frame transfer, or is it a feature/issue with OMAP DSI driver, or a
feature/issue in the command mode panel used.
Most likely this is related to the following from the DSI spec:
"To enable PHY synchronization the host processor should periodically
end HS transmission and drive the Data Lanes to the LP state. This
transition should take place at least once per frame."
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-62-tomi.valkeinen@ti.com
The DSI host driver currently ignores the video mode flags in
client->mode_flags. Add the code to take the transfer mode from client's
mode_flags.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-60-tomi.valkeinen@ti.com
If the PLL calc function is given bad parameters, n_start/m_start may be
higher than n_stop/m_stop, which leads to the loops iterating through
the whole u32 number space.
Fix this by failing early on such cases.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-59-tomi.valkeinen@ti.com
dss_mgr_ops was needed with the multi-module architecture, but is no
longer needed. We can thus remove it and use direct calls.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-55-tomi.valkeinen@ti.com
dispc_ops was created to help with the multi-module architecture and
giving us the possibility of multiple dispc implementations. Neither of
these is valid anymore, and we can remove dispc_ops and use direct
calls to dispc.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-54-tomi.valkeinen@ti.com
At the moment we have three different modules: omapdss-base, omapdss,
omapdrm. This setup is finally obsolete, as the last omapdrm specific
panel has been converted to DRM panel.
We can thus remove omapdss-base and omapdss, and just compile everything
into omapdrm.ko.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-51-tomi.valkeinen@ti.com
Simplify DSI pin config, which always originates from DT
nowadays. With the code being fully contained in the DSI
encoder, we can drop the public structure.
Since the function is no longer exposed, it now directly
takes the private DSI data pointer. This drops a pointless
conversion and means the pins can be configured earlier.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-49-tomi.valkeinen@ti.com
Move dsi_ops into the main structure, since all other ops
are gone. Instead of checking the device type we can simply
check if dsi_ops are set.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-48-tomi.valkeinen@ti.com
All displays are now using a drm_panel or a drm_bridge that models the
connector instead of dssdev, so this field is always 0 and can be
dropped.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-47-tomi.valkeinen@ti.com
