7176 Commits

Author	SHA1	Message	Date
Jon Hunter	476e23f4c5	arm64: tegra: Correct the UART for Jetson Xavier NX ... The Jetson Xavier NX board routes UARTA to the 40-pin header and UARTC to a 12-pin debug header. The UARTs can be used by either the Tegra Combined UART (TCU) driver or the Tegra 8250 driver. By default, the TCU will use UARTC on Jetson Xavier NX. Currently, device-tree for Xavier NX enables the TCU and the Tegra 8250 node for UARTC. Fix this by disabling the Tegra 8250 node for UARTC and enabling the Tegra 8250 node for UARTA. Fixes: 3f9efbbe57 ("arm64: tegra: Add support for Jetson Xavier NX") Cc: stable@vger.kernel.org Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>	2020-11-25 15:23:39 +01:00
Jon Hunter	fb31949693	arm64: tegra: Disable the ACONNECT for Jetson TX2 ... Commit ff4c371d2b ("arm64: defconfig: Build ADMA and ACONNECT driver") enable the Tegra ADMA and ACONNECT drivers and this is causing resume from system suspend to fail on Jetson TX2. Resume is failing because the ACONNECT driver is being resumed before the BPMP driver, and the ACONNECT driver is attempting to power on a power-domain that is provided by the BPMP. While a proper fix for the resume sequencing problem is identified, disable the ACONNECT for Jetson TX2 temporarily to avoid breaking system suspend. Please note that ACONNECT driver is used by the Audio Processing Engine (APE) on Tegra, but because there is no mainline support for APE on Jetson TX2 currently, disabling the ACONNECT does not disable any useful feature at the moment. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>	2020-11-25 15:23:39 +01:00
Linus Torvalds	e533cda12d	ARM: Devicetree updates ... As usual, most of the changes are to devicetrees. Besides smaller fixes, some refactorings and cleanups, some of the new platforms and chips (or significant features) supported are below: Broadcom boards: - Cisco Meraki MR32 (BCM53016-based) - BCM2711 (RPi4) display pipeline support Actions Semi boards: - Caninos Loucos Labrador SBC (S500-based) - RoseapplePi SBC (S500-based) Allwinner SoCs/boards: - A100 SoC with Perf1 board - Mali, DMA, Cetrus and IR support for R40 SoC Amlogic boards: - Libretch S905x CC V2 board - Hardkernel ODROID-N2+ board Aspeed boards/platforms: - Wistron Mowgli (AST2500-based, Power9 OpenPower server) - Facebook Wedge400 (AST2500-based, ToR switch) Hisilicon SoC: - SD5203 SoC Nvidia boards: - Tegra234 VDK, for pre-silicon Orin SoC NXP i.MX boards: - Librem 5 phone - i.MX8MM DDR4 EVK - Variscite VAR-SOM-MX8MN SoM - Symphony board - Tolino Shine 2 HD - TQMa6 SoM - Y Soft IOTA Orion Rockchip boards: - NanoPi R2S board - A95X-Z2 board - more Rock-Pi4 variants STM32 boards: - Odyssey SOM board (STM32MP157CAC-based) - DH DRC02 board Toshiba SoCs/boards: - Visconti SoC and TPMV7708 board -----BEGIN PGP SIGNATURE----- iQJDBAABCgAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAl+TVacPHG9sb2ZAbGl4 b20ubmV0AAoJEIwa5zzehBx37MMP/imMO5e0QY1/7xxXWm4Kgc/Uffqw2Dvhj74a 4Nrudwz6oUFGpZzIFYxqeCeWwotjA0nXmvM4Nl/SbxtlbV6nY/JrOL1OJToaGY0z Oc1jdA0MdXITdi6Xl5PTRqDeIHTSUmTclZWi5gvT7LFEvHog3mquJ7PiNTrjyuV0 9BmHipwfmH6V5gDJZvN2dDlkhy0cpQKJFw7ylKCL89UNiEAd2QtNG0d0RLdz7yPX IGdecFelOhG9MSZyuFYYB2HOI33ukjZ9dA+yFy7BWOqegf/Z5hI02mxpke7Sys/5 4XEN7ksSSYr6sm3h9XNW++IYkapZ9y/ZW+sQdiBZ3GMOwMXj02TdRkpC7f+FgAPo Hl7yXodGmXynL6ULu7/lIbBvqfWkLcwfVCYZx6PoWRE2q5g5ifoYp9b8kI5cLXrb BJn85XIuIaoO0cgrq7EzZnksaiwY1CNL84mYgkKRCGbBoJKHRiU+8Ilm5SKzk3kq KJ0gmbwFMjvTYxs3g6LPCo0jUNLjmLQMr0tL7iHDWkk5uqA+gfjKSLQfPby3jrMr 6RDZBzMB+tPz1e++RWo41XD/Mm2kw8MGstsCOLzk2TdLh7e3fPfU4g7m0aqs/Q1y +LCqshffF/XVzV2uTFHDUGWufIM9nY6rdzuBc+JACJ5E+QyDg1tGKtMB3TYqgdN2 aRY3NLSv =xjfB -----END PGP SIGNATURE----- Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM Devicetree updates from Olof Johansson: "As usual, most of the changes are to devicetrees. Besides smaller fixes, some refactorings and cleanups, some of the new platforms and chips (or significant features) supported are below: Broadcom boards: - Cisco Meraki MR32 (BCM53016-based) - BCM2711 (RPi4) display pipeline support Actions Semi boards: - Caninos Loucos Labrador SBC (S500-based) - RoseapplePi SBC (S500-based) Allwinner SoCs/boards: - A100 SoC with Perf1 board - Mali, DMA, Cetrus and IR support for R40 SoC Amlogic boards: - Libretch S905x CC V2 board - Hardkernel ODROID-N2+ board Aspeed boards/platforms: - Wistron Mowgli (AST2500-based, Power9 OpenPower server) - Facebook Wedge400 (AST2500-based, ToR switch) Hisilicon SoC: - SD5203 SoC Nvidia boards: - Tegra234 VDK, for pre-silicon Orin SoC NXP i.MX boards: - Librem 5 phone - i.MX8MM DDR4 EVK - Variscite VAR-SOM-MX8MN SoM - Symphony board - Tolino Shine 2 HD - TQMa6 SoM - Y Soft IOTA Orion Rockchip boards: - NanoPi R2S board - A95X-Z2 board - more Rock-Pi4 variants STM32 boards: - Odyssey SOM board (STM32MP157CAC-based) - DH DRC02 board Toshiba SoCs/boards: - Visconti SoC and TPMV7708 board" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (638 commits) ARM: dts: nspire: Fix SP804 users arm64: dts: lg: Fix SP804 users arm64: dts: lg: Fix SP805 clocks ARM: mstar: Fix up the fallout from moving the dts/dtsi files ARM: mstar: Add mstar prefix to all of the dtsi/dts files ARM: mstar: Add interrupt to pm_uart ARM: mstar: Add interrupt controller to base dtsi ARM: dts: meson8: remove two invalid interrupt lines from the GPU node arm64: dts: ti: k3-j7200-common-proc-board: Add USB support arm64: dts: ti: k3-j7200-common-proc-board: Configure the SERDES lane function arm64: dts: ti: k3-j7200-main: Add USB controller arm64: dts: ti: k3-j7200-main.dtsi: Add USB to SERDES lane MUX arm64: dts: ti: k3-j7200-main: Add SERDES lane control mux dt-bindings: ti-serdes-mux: Add defines for J7200 SoC ARM: dts: hisilicon: add SD5203 dts ARM: dts: hisilicon: fix the system controller compatible nodes arm64: dts: zynqmp: Fix leds subnode name for zcu100/ultra96 v1 arm64: dts: zynqmp: Remove undocumented u-boot properties arm64: dts: zynqmp: Remove additional compatible string for i2c IPs arm64: dts: zynqmp: Rename buses to be align with simple-bus yaml ...	2020-10-24 10:44:18 -07:00
Linus Torvalds	1f70935f63	ARM: SoC fixes ... I had queued up a batch of fixes that got a bit close to the release for sending in before the merge window opened, so I'm including them in the batch of pull requests instead. They're mostly smaller DT tweaks and fixes, the usual mix that we tend to have through the releases. -----BEGIN PGP SIGNATURE----- iQJDBAABCgAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAl+TTg8PHG9sb2ZAbGl4 b20ubmV0AAoJEIwa5zzehBx3kQUP/j1HTcEOghLsUPAiV+kz1qEWjS1tcm4/OV+b +Tp4pQh5Fy++iXS9yWmCgr/kMxJ4EQkCZERO+8a1VNBms/+0j3KiFuiGsZo0rKZU QdJvY3q8JYoLYdbyYJ8B7WAT6oS0giBoskGT6FRiwPC7uqM7va1KZOtNeESblt+6 Ty4w5ognXbAvSLz+2VaTZTLbO7fbvd3oSwmbnN7n/qhoRPwaNExJHXTI057ekh4Y XqjGbYYTwY+Cdm8DkI1Dz2EPKegmSaVxS7+xzacNosx0559qe3pqrZ5OqrTui00Y /2T5caepAAjdEQsX6es2+mKRRXXWPRJMzHegv/mWvqJ68DPJZLgoHFcY2xy4cclr ALyc96rEbJTQw5jgoJO1waD6vMZOA7EqE3IXREtxcK8xYRvnK6Od8BJt7lCvB7jN Ws6U8udqPmeC+PUV9yhBhS8eR/S8MjeQfPK9h0xqqLEhHXqFTeqLHk3EompUaIsy BwPmPuZI7MBrtwXvrpbdd6I2iw/7XetIrtvSO6Z/d7iZYlf49WJhh6gBtPRnOKGX zOc90ohFjw/oMFoMpCHsXzyzrwtd/AUqEu/ZRV/yr4yvkpjfpwIRN/cTsN32nRYy Oi3BTSxow88U7CxZTwkWtwoB+alJ0ZKh3QeyLa/dwiMgj+eUc900kZLqroEMNXO1 1JWG9qL4 =tvbv -----END PGP SIGNATURE----- Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Olof Johansson: "I had queued up a batch of fixes that got a bit close to the release for sending in before the merge window opened, so I'm including them in the merge window batch instead. Mostly smaller DT tweaks and fixes, the usual mix that we tend to have through the releases" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: dts: iwg20d-q7-common: Fix touch controller probe failure ARM: OMAP2+: Restore MPU power domain if cpu_cluster_pm_enter() fails ARM: dts: am33xx: modify AM33XX_IOPAD for #pinctrl-cells = 2 soc: actions: include header to fix missing prototype arm64: dts: ti: k3-j721e: Rename mux header and update macro names soc: qcom: pdr: Fixup array type of get_domain_list_resp message arm64: dts: qcom: pm660: Fix missing pound sign in interrupt-cells arm64: dts: qcom: kitakami: Temporarily disable SDHCI1 arm64: dts: sdm630: Temporarily disable SMMUs by default arm64: dts: sdm845: Fixup OPP table for all qup devices arm64: dts: allwinner: h5: remove Mali GPU PMU module ARM: dts: sun8i: r40: bananapi-m2-ultra: Fix dcdc1 regulator soc: xilinx: Fix error code in zynqmp_pm_probe()	2020-10-24 10:26:06 -07:00
Linus Torvalds	9ff9b0d392	networking changes for the 5.10 merge window ... Add redirect_neigh() BPF packet redirect helper, allowing to limit stack traversal in common container configs and improving TCP back-pressure. Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain. Expand netlink policy support and improve policy export to user space. (Ge)netlink core performs request validation according to declared policies. Expand the expressiveness of those policies (min/max length and bitmasks). Allow dumping policies for particular commands. This is used for feature discovery by user space (instead of kernel version parsing or trial and error). Support IGMPv3/MLDv2 multicast listener discovery protocols in bridge. Allow more than 255 IPv4 multicast interfaces. Add support for Type of Service (ToS) reflection in SYN/SYN-ACK packets of TCPv6. In Multi-patch TCP (MPTCP) support concurrent transmission of data on multiple subflows in a load balancing scenario. Enhance advertising addresses via the RM_ADDR/ADD_ADDR options. Support SMC-Dv2 version of SMC, which enables multi-subnet deployments. Allow more calls to same peer in RxRPC. Support two new Controller Area Network (CAN) protocols - CAN-FD and ISO 15765-2:2016. Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit kernel problem. Add TC actions for implementing MPLS L2 VPNs. Improve nexthop code - e.g. handle various corner cases when nexthop objects are removed from groups better, skip unnecessary notifications and make it easier to offload nexthops into HW by converting to a blocking notifier. Support adding and consuming TCP header options by BPF programs, opening the doors for easy experimental and deployment-specific TCP option use. Reorganize TCP congestion control (CC) initialization to simplify life of TCP CC implemented in BPF. Add support for shipping BPF programs with the kernel and loading them early on boot via the User Mode Driver mechanism, hence reusing all the user space infra we have. Support sleepable BPF programs, initially targeting LSM and tracing. Add bpf_d_path() helper for returning full path for given 'struct path'. Make bpf_tail_call compatible with bpf-to-bpf calls. Allow BPF programs to call map_update_elem on sockmaps. Add BPF Type Format (BTF) support for type and enum discovery, as well as support for using BTF within the kernel itself (current use is for pretty printing structures). Support listing and getting information about bpf_links via the bpf syscall. Enhance kernel interfaces around NIC firmware update. Allow specifying overwrite mask to control if settings etc. are reset during update; report expected max time operation may take to users; support firmware activation without machine reboot incl. limits of how much impact reset may have (e.g. dropping link or not). Extend ethtool configuration interface to report IEEE-standard counters, to limit the need for per-vendor logic in user space. Adopt or extend devlink use for debug, monitoring, fw update in many drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx, dpaa2-eth). In mlxsw expose critical and emergency SFP module temperature alarms. Refactor port buffer handling to make the defaults more suitable and support setting these values explicitly via the DCBNL interface. Add XDP support for Intel's igb driver. Support offloading TC flower classification and filtering rules to mscc_ocelot switches. Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as fixed interval period pulse generator and one-step timestamping in dpaa-eth. Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3) offload. Add Lynx PHY/PCS MDIO module, and convert various drivers which have this HW to use it. Convert mvpp2 to split PCS. Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as 7-port Mediatek MT7531 IP. Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver, and wcn3680 support in wcn36xx. Improve performance for packets which don't require much offloads on recent Mellanox NICs by 20% by making multiple packets share a descriptor entry. Move chelsio inline crypto drivers (for TLS and IPsec) from the crypto subtree to drivers/net. Move MDIO drivers out of the phy directory. Clean up a lot of W=1 warnings, reportedly the actively developed subsections of networking drivers should now build W=1 warning free. Make sure drivers don't use in_interrupt() to dynamically adapt their code. Convert tasklets to use new tasklet_setup API (sadly this conversion is not yet complete). Signed-off-by: Jakub Kicinski <kuba@kernel.org> -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAl+ItRwACgkQMUZtbf5S IrtTMg//UxpdR/MirT1DatBU0K/UGAZY82hV7F/UC8tPgjfHZeHvWlDFxfi3YP81 PtPKbhRZ7DhwBXefUp6nY3UdvjftrJK2lJm8prJUPSsZRye8Wlcb7y65q7/P2y2U Efucyopg6RUrmrM0DUsIGYGJgylQLHnMYUl/keCsD4t5Bp4ksyi9R2t5eitGoWzh r3QGdbSa0AuWx4iu0i+tqp6Tj0ekMBMXLVb35dtU1t0joj2KTNEnSgABN3prOa8E iWYf2erOau68Ogp3yU3miCy0ZU4p/7qGHTtzbcp677692P/ekak6+zmfHLT9/Pjy 2Stq2z6GoKuVxdktr91D9pA3jxG4LxSJmr0TImcGnXbvkMP3Ez3g9RrpV5fn8j6F mZCH8TKZAoD5aJrAJAMkhZmLYE1pvDa7KolSk8WogXrbCnTEb5Nv8FHTS1Qnk3yl wSKXuvutFVNLMEHCnWQLtODbTST9DI/aOi6EctPpuOA/ZyL1v3pl+gfp37S+LUTe owMnT/7TdvKaTD0+gIyU53M6rAWTtr5YyRQorX9awIu/4Ha0F0gYD7BJZQUGtegp HzKt59NiSrFdbSH7UdyemdBF4LuCgIhS7rgfeoUXMXmuPHq7eHXyHZt5dzPPa/xP 81P0MAvdpFVwg8ij2yp2sHS7sISIRKq17fd1tIewUabxQbjXqPc= =bc1U -----END PGP SIGNATURE----- Merge tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: - Add redirect_neigh() BPF packet redirect helper, allowing to limit stack traversal in common container configs and improving TCP back-pressure. Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain. - Expand netlink policy support and improve policy export to user space. (Ge)netlink core performs request validation according to declared policies. Expand the expressiveness of those policies (min/max length and bitmasks). Allow dumping policies for particular commands. This is used for feature discovery by user space (instead of kernel version parsing or trial and error). - Support IGMPv3/MLDv2 multicast listener discovery protocols in bridge. - Allow more than 255 IPv4 multicast interfaces. - Add support for Type of Service (ToS) reflection in SYN/SYN-ACK packets of TCPv6. - In Multi-patch TCP (MPTCP) support concurrent transmission of data on multiple subflows in a load balancing scenario. Enhance advertising addresses via the RM_ADDR/ADD_ADDR options. - Support SMC-Dv2 version of SMC, which enables multi-subnet deployments. - Allow more calls to same peer in RxRPC. - Support two new Controller Area Network (CAN) protocols - CAN-FD and ISO 15765-2:2016. - Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit kernel problem. - Add TC actions for implementing MPLS L2 VPNs. - Improve nexthop code - e.g. handle various corner cases when nexthop objects are removed from groups better, skip unnecessary notifications and make it easier to offload nexthops into HW by converting to a blocking notifier. - Support adding and consuming TCP header options by BPF programs, opening the doors for easy experimental and deployment-specific TCP option use. - Reorganize TCP congestion control (CC) initialization to simplify life of TCP CC implemented in BPF. - Add support for shipping BPF programs with the kernel and loading them early on boot via the User Mode Driver mechanism, hence reusing all the user space infra we have. - Support sleepable BPF programs, initially targeting LSM and tracing. - Add bpf_d_path() helper for returning full path for given 'struct path'. - Make bpf_tail_call compatible with bpf-to-bpf calls. - Allow BPF programs to call map_update_elem on sockmaps. - Add BPF Type Format (BTF) support for type and enum discovery, as well as support for using BTF within the kernel itself (current use is for pretty printing structures). - Support listing and getting information about bpf_links via the bpf syscall. - Enhance kernel interfaces around NIC firmware update. Allow specifying overwrite mask to control if settings etc. are reset during update; report expected max time operation may take to users; support firmware activation without machine reboot incl. limits of how much impact reset may have (e.g. dropping link or not). - Extend ethtool configuration interface to report IEEE-standard counters, to limit the need for per-vendor logic in user space. - Adopt or extend devlink use for debug, monitoring, fw update in many drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx, dpaa2-eth). - In mlxsw expose critical and emergency SFP module temperature alarms. Refactor port buffer handling to make the defaults more suitable and support setting these values explicitly via the DCBNL interface. - Add XDP support for Intel's igb driver. - Support offloading TC flower classification and filtering rules to mscc_ocelot switches. - Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as fixed interval period pulse generator and one-step timestamping in dpaa-eth. - Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3) offload. - Add Lynx PHY/PCS MDIO module, and convert various drivers which have this HW to use it. Convert mvpp2 to split PCS. - Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as 7-port Mediatek MT7531 IP. - Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver, and wcn3680 support in wcn36xx. - Improve performance for packets which don't require much offloads on recent Mellanox NICs by 20% by making multiple packets share a descriptor entry. - Move chelsio inline crypto drivers (for TLS and IPsec) from the crypto subtree to drivers/net. Move MDIO drivers out of the phy directory. - Clean up a lot of W=1 warnings, reportedly the actively developed subsections of networking drivers should now build W=1 warning free. - Make sure drivers don't use in_interrupt() to dynamically adapt their code. Convert tasklets to use new tasklet_setup API (sadly this conversion is not yet complete). * tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2583 commits) Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH" net, sockmap: Don't call bpf_prog_put() on NULL pointer bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to lo bpf, sockmap: Add locking annotations to iterator netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statements net: fix pos incrementment in ipv6_route_seq_next net/smc: fix invalid return code in smcd_new_buf_create() net/smc: fix valid DMBE buffer sizes net/smc: fix use-after-free of delayed events bpfilter: Fix build error with CONFIG_BPFILTER_UMH cxgb4/ch_ipsec: Replace the module name to ch_ipsec from chcr net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info bpf: Fix register equivalence tracking. rxrpc: Fix loss of final ack on shutdown rxrpc: Fix bundle counting for exclusive connections netfilter: restore NF_INET_NUMHOOKS ibmveth: Identify ingress large send packets. ibmveth: Switch order of ibmveth_helper calls. cxgb4: handle 4-tuple PEDIT to NAT mode translation selftests: Add VRF route leaking tests ...	2020-10-15 18:42:13 -07:00
Linus Torvalds	b4e1bce85f	Pin control bulk changes for the v5.10 kernel cycle ... Core changes: - NONE whatsoever, we don't even touch the core files this time around. New drivers: - New driver for the Toshiba Visconti SoC. - New subdriver for the Qualcomm MSM8226 SoC. - New subdriver for the Actions Semiconductor S500 SoC. - New subdriver for the Mediatek MT8192 SoC. - New subdriver for the Microchip SAMA7G5 SoC. Driver enhancements: - Intel Cherryview and Baytrail cleanups and refactorings. - Enhanced support for the Renesas R8A7790, more pins and groups. - Some optimizations for the MCP23S08 MCP23x17 variant. - Some cleanups around the Actions Semiconductor subdrivers. - A bunch of cleanups around the SH-PFC and Emma Mobile drivers. - The "SH-PFC" (literally SuperH pin function controller, I think) subdirectory is now renamed to the more neutral "renesas", as these are not very much centered around SuperH anymore. - Non-critical fixes for the Aspeed driver. - Non-critical fixes for the Ingenic (MIPS!) driver. - Fix a bunch of missing pins on the AMD pinctrl driver. -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAl+G8G0ACgkQQRCzN7AZ XXMAVw/+MBb0vaQKsD3ezoIeS6Pb8urDxnE7/A+IpU90coBFp+DbJIzTMbKhUb2L z72dAUB6zadQxPwruAt22TO81hmVwOGgqp6c/Z4G+BRDg9/GXVwEidnQqwXY7KWn zD0eJxzBxlXv76QHlJ2rT4YI9q2IhxAV1yIW638vsrLC+HZEnxKTL9U8Yx2f7ybq aCKPNPERo9oMIz+xuqpbHVeR2A2KpCAGRqCYw3Br+y4fnfkkEl7+0M5jKpBYU4yu NzTz7p0dlbeWEAhRMJCHx8wuSbV46k+AAjopJESMiaXlbS51cv+MF7p0NXhZHmNg ib6RivRZnQ2tFfznk9b6BXNywUGjUNUFWJrDrbDcbXR/k8XQtE+Hs6UQF1nuLWGS ZOppeFu2blJKyqFYMu4sT+d8fF7YNtU0TyVl2A60hg1Ef9ygGuiIASe9Pv2lgcRQ 7M94yh264oc1yEF+IUi8VeMypVg9ckklNWzacQ6oritluTR8mTk1eAFqHATi7g3W 4R3BSsBNtOySEoZS3I73HFdCuzBvXyfVTZz+iLAv2u9iVXd5kINhCxAFl9o2sEOH G6jvqxijP1hBQTCKyFGzNgHGGwsyvRYbMS9Oog1uKMTIk4yP0wy60LY7OE78HKKh uMOEbmE8bn8+oRl0z3QLttZssllFgYiruwNN2TGXUwBr868z+W0= =TdjX -----END PGP SIGNATURE----- Merge tag 'pinctrl-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "Core changes: - NONE whatsoever, we don't even touch the core files this time around. New drivers: - New driver for the Toshiba Visconti SoC. - New subdriver for the Qualcomm MSM8226 SoC. - New subdriver for the Actions Semiconductor S500 SoC. - New subdriver for the Mediatek MT8192 SoC. - New subdriver for the Microchip SAMA7G5 SoC. Driver enhancements: - Intel Cherryview and Baytrail cleanups and refactorings. - Enhanced support for the Renesas R8A7790, more pins and groups. - Some optimizations for the MCP23S08 MCP23x17 variant. - Some cleanups around the Actions Semiconductor subdrivers. - A bunch of cleanups around the SH-PFC and Emma Mobile drivers. - The "SH-PFC" (literally SuperH pin function controller, I think) subdirectory is now renamed to the more neutral "renesas", as these are not very much centered around SuperH anymore. - Non-critical fixes for the Aspeed driver. - Non-critical fixes for the Ingenic (MIPS!) driver. - Fix a bunch of missing pins on the AMD pinctrl driver" * tag 'pinctrl-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (78 commits) pinctrl: amd: Add missing pins to the pin group list dt-bindings: pinctrl: sunxi: Allow pinctrl with more interrupt banks pinctrl: visconti: PINCTRL_TMPV7700 should depend on ARCH_VISCONTI pinctrl: mediatek: Free eint data on failure pinctrl: single: fix debug output when #pinctrl-cells = 2 pinctrl: single: fix pinctrl_spec.args_count bounds check pinctrl: sunrisepoint: Modify COMMUNITY macros to be consistent pinctrl: cannonlake: Modify COMMUNITY macros to be consistent pinctrl: tigerlake: Fix register offsets for TGL-H variant pinctrl: Document pinctrl-single,pins when #pinctrl-cells = 2 pinctrl: mediatek: use devm_platform_ioremap_resource_byname() pinctrl: nuvoton: npcm7xx: Constify static ops structs pinctrl: mediatek: mt7622: add antsel pins/groups pinctrl: ocelot: simplify the return expression of ocelot_gpiochip_register() pinctrl: at91-pio4: add support for sama7g5 SoC dt-bindings: pinctrl: at91-pio4: add microchip,sama7g5 pinctrl: spear: simplify the return expression of tvc_connect() pinctrl: spear: simplify the return expression of spear310_pinctrl_probe pinctrl: sprd: use module_platform_driver to simplify the code pinctrl: Ingenic: Add I2S pins support for Ingenic SoCs. ...	2020-10-14 15:25:04 -07:00
Claudiu Manoil	9fce74bf22	arm64: dts: fsl-ls1028a-rdb: Specify in-band mode for ENETC port 0 ... As part of the transition of the enetc ethernet driver from phylib to phylink, the in-band operation mode of the SGMII interface from enetc port 0 needs to be specified explicitly for phylink. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>	2020-10-11 11:04:42 -07:00
Olof Johansson	098bfcec1b	Visconti5 SoC changes for v5.10 (take two) ... - Add dt-bindings for Toshiba Visconti ARM SoCs - Add dt-bindings for the TMPV7708 RM main board - Add initial support for Toshiba Visconti platform - Add device tree for TMPV7708 RM main board - Add information for Toshiba Visconti ARM SoCs to MAINTAINERS - Enable configs for Toshiba Visconti to arm64's defconfig -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEXmKe5SMhlzV7hM9DMiR/u0CtH6YFAl9rBdkACgkQMiR/u0Ct H6bECxAAkoXu7alw5LqfyDkiOHKehMoKjLXYdIHANFii4+K/H+rkkwPoQS96rOPM N2rvXP4ddtbZto/gtiUk4rGBUFN/onH0uAVnewgspORKiV1fZSfJtOel+s5wZFmR YNpvPTlxnY2qh+fgf1RJdNdfI8Bg9ebKgPnO9m8gZO5lGBEAQCAkTALH+RoBb/Y0 j/2/ZcGEb3A6V3tJu+lQNERdWurHhUAcdZ5q/N86APPe0TWf0zNOMeLc2cbeGihZ fRv9vbhZfO3b0XuEjYw2I5qAo80cubU/1m5z+YYzJFj1FBUKDHfcaVZevBvJu7Aa xvnb0MfAypw2zNpvdZEZw8iCNUEaWxgxwqsbFpr67eg4MXe2b8AFSS4oU1WGd07K Rnc24yG2r+AeRa8J+AYKTTDtpLOyogDWXSqba/GavbMQQ8VyTEt0e792fH5u8tCk MtCA3thXbNaRA3d8wL9S/RnGMyiXKoZqjRGBrdgSVGubw5qs6eNz/ZDH1ufoBBVA BEyrIXwBI4qg6j+Z+Bfr/e+MMOP5pcVEoFiGaVK0RMTTf4/F1PnVvk7yO9KN+LaA uRcUyh1OGKPh+7bPt6o2DGpq3sHiEPCH3y/TULhmbFP0GcOYcxGC6vddvSq4CGyb IcISu3JawgpL6h1W7HaSeK2ugPrutwgRagy0XlOiJOHVfT5HWas= =RVbA -----END PGP SIGNATURE----- Merge tag 'visconti-initial-for-5.10-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/iwamatsu/linux-visconti into arm/dt Visconti5 SoC changes for v5.10 (take two) - Add dt-bindings for Toshiba Visconti ARM SoCs - Add dt-bindings for the TMPV7708 RM main board - Add initial support for Toshiba Visconti platform - Add device tree for TMPV7708 RM main board - Add information for Toshiba Visconti ARM SoCs to MAINTAINERS - Enable configs for Toshiba Visconti to arm64's defconfig * tag 'visconti-initial-for-5.10-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/iwamatsu/linux-visconti: arm64: defconfig: Enable configs for Toshiba Visconti MAINTAINERS: Add information for Toshiba Visconti ARM SoCs arm64: dts: visconti: Add device tree for TMPV7708 RM main board arm64: visconti: Add initial support for Toshiba Visconti platform dt-bindings: arm: toshiba: Add the TMPV7708 RM main board dt-bindings: arm: toshiba: add Toshiba Visconti ARM SoCs Link: https://lore.kernel.org/r/20200923085236.4hu53gmnnmqkttuy@toshiba.co.jp Signed-off-by: Olof Johansson <olof@lixom.net>	2020-10-03 13:21:26 -07:00
Andre Przywara	c9794866ac	arm64: dts: lg: Fix SP804 users ... Even though the SP804 binding allows to specify only one clock, the primecell driver requires a named clock to activate the bus clock. Specify the one clock three times and provide some clock-names, to make the DT match the SP804 and primecell binding. Also add the missing arm,primecell compatible string. Link: https://lore.kernel.org/r/20200907121831.242281-4-andre.przywara@arm.com Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>	2020-10-03 12:56:46 -07:00
Andre Przywara	fc772314a3	arm64: dts: lg: Fix SP805 clocks ... The SP805 DT binding requires two clocks to be specified, but the two LG platform DTs currently only specify one clock. In practice, Linux would pick a clock named "apb_pclk" for the bus clock, and the Linux (and U-Boot) SP805 driver would use the first clock to derive the actual watchdog counter frequency. Since currently both are the very same clock, we can just double the clock reference, and add the correct clock-names, to match the binding. Link: https://lore.kernel.org/r/20200907121831.242281-6-andre.przywara@arm.com Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Chanho Min <chanho.min@lge.com> Signed-off-by: Olof Johansson <olof@lixom.net>	2020-10-03 12:56:03 -07:00
Olof Johansson	02d0bf1ae8	arm64: soc: ZynqMP DT changes for v5.10 ... - Fix IRQ flag for PMIC - Align gpio hogs and leds with naming convention - Rename busses to match DT schema - Tune i2c cadence compatible string - Remove undocumented u-boot properties -----BEGIN PGP SIGNATURE----- iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCX3MfRAAKCRDKSWXLKUoM IYrOAJ9Rmw076IwypgsJ4q/t9KvAn3dXSQCfffGvvHE8+rI8ZozVZ+IoSxaL9S0= =qHTW -----END PGP SIGNATURE----- Merge tag 'zynqmp-dt-for-v5.10' of https://github.com/Xilinx/linux-xlnx into arm/dt arm64: soc: ZynqMP DT changes for v5.10 - Fix IRQ flag for PMIC - Align gpio hogs and leds with naming convention - Rename busses to match DT schema - Tune i2c cadence compatible string - Remove undocumented u-boot properties * tag 'zynqmp-dt-for-v5.10' of https://github.com/Xilinx/linux-xlnx: arm64: dts: zynqmp: Fix leds subnode name for zcu100/ultra96 v1 arm64: dts: zynqmp: Remove undocumented u-boot properties arm64: dts: zynqmp: Remove additional compatible string for i2c IPs arm64: dts: zynqmp: Rename buses to be align with simple-bus yaml arm64: dts: xilinx: align GPIO hog names with dtschema arm64: dts: zynqmp-zcu100-revC: correct interrupt flags arm64: dts: xilinx: Align IOMMU nodename with dtschema arm64: dts: zynqmp: Add GTR transceivers Link: https://lore.kernel.org/r/37a0333b-541e-649c-68c5-aa4b52e6b91d@monstr.eu Signed-off-by: Olof Johansson <olof@lixom.net>	2020-10-03 12:43:27 -07:00
Olof Johansson	a3ca4b5e92	Actions Semi ARM64 DT for v5.10: ... - Fix the memory region used by pinctrl and sps drivers on the S700 SoC. The issue is fixed by limiting the address space used by pinctrl driver. In hardware these two are separate subsystems but the hw engineers somehow merged the registers space into one. So we now limit the address space with appropriate offsets for the two drivers. - Add DMA controller support for S700 SoC. The relevant driver changes are picked up by DMA Engine mainatainer. The DMA on this SoC can be used for mem-to-mem and mem-to-peripheral transfers. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEZ6VDKoFIy9ikWCeXVZ8R5v6RzvUFAl9psSsACgkQVZ8R5v6R zvXpIwf/aPOv832RfHqYe+Skq0TujFNno3AocCsZpHiy1BS9JoaKVBw9O4EecZhu aWTag7hubNF8XcEE4dZWSwxkl0DNlpdWvRZNbbS/X6KUoS3lNwkVq4nuN2RXgw0p bUoKuHSpVHSj667+/h+VuslqX0Ef6CAy4pmg6qaCpIlWCYzLX1hQ41pLNtDy0tNp 39d8yjCdbA6ye9vtgemzLqY0GvPs8GS7dDQbGdIhKPiGJOVoxMCsLV48yfhE9JQF 6y7ZMYvYU6oadS5SdLa8IhC9MzZ80MK9cxz9ve3r6Svznv2Ue0mqkfLJXRA1j8gs 6Yg1fecxMQvx75dNMcQvB6eM9r4rOw== =R/29 -----END PGP SIGNATURE----- Merge tag 'actions-arm64-dt-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions into arm/dt Actions Semi ARM64 DT for v5.10: - Fix the memory region used by pinctrl and sps drivers on the S700 SoC. The issue is fixed by limiting the address space used by pinctrl driver. In hardware these two are separate subsystems but the hw engineers somehow merged the registers space into one. So we now limit the address space with appropriate offsets for the two drivers. - Add DMA controller support for S700 SoC. The relevant driver changes are picked up by DMA Engine mainatainer. The DMA on this SoC can be used for mem-to-mem and mem-to-peripheral transfers. * tag 'actions-arm64-dt-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions: arm64: dts: actions: Add DMA Controller for S700 arm64: dts: actions: limit address range for pinctrl node Link: https://lore.kernel.org/r/20200922114030.GC11251@Mani-XPS-13-9360 Signed-off-by: Olof Johansson <olof@lixom.net>	2020-10-03 12:36:28 -07:00
Olof Johansson	2494ad156d	Our usual bunch of patches to support the Allwinner SoCs, this time ... adding: - Allwinner A100 initial support - Mali, DMA, cedrus and IR Support for the R40 - Crypto support for the v3s - New board: Allwinner A100 Perf1 -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCX2jL0QAKCRDj7w1vZxhR xZNsAQDAHtwf/iPHoTuMw9Gz4bqPifvR1L4+aatT1YuHrksd7wD/Y/OLntePJ97I K+UKZf2bqDOf1RzUIIMiKJe3x/5NrQM= =Ejn3 -----END PGP SIGNATURE----- Merge tag 'sunxi-dt-for-5.10-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt Our usual bunch of patches to support the Allwinner SoCs, this time adding: - Allwinner A100 initial support - Mali, DMA, cedrus and IR Support for the R40 - Crypto support for the v3s - New board: Allwinner A100 Perf1 * tag 'sunxi-dt-for-5.10-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (24 commits) ARM: dts: sun8i: v3s: Enable crypto engine dt-bindings: crypto: Add compatible for V3s dt-bindings: crypto: Specify that allwinner, sun8i-a33-crypto needs reset arm64: dts: allwinner: a64: Update the audio codec compatible arm64: dts: allwinner: a64: Update codec widget names ARM: dts: sun8i: a33: Update codec widget names ARM: dts: sun8i: r40: Add video engine node ARM: dts: sun8i: r40: Add node for system controller dt-bindings: sram: allwinner, sun4i-a10-system-control: Add R40 compatibles ARM: dts: sun8i: r40: bananapi-m2-ultra: Enable IR ARM: dts: sun8i: r40: Add IR nodes dt-bindings: media: allwinner, sun4i-a10-ir: Add R40 compatible ARM: dts: sun8i: r40: Add DMA node dt-bindings: dma: allwinner,sun50i-a64-dma: Add R40 compatible arm64: allwinner: A100: add support for Allwinner Perf1 board dt-bindings: arm: sunxi: Add Allwinner A100 Perf1 Board bindings arm64: allwinner: A100: add the basical Allwinner A100 DTSI file dt-bindings: irq: sun7i-nmi: Add binding for A100's NMI controller dt-bindings: irq: sun7i-nmi: fix dt-binding for a80 nmi ARM: dts: sun4i: Enable HDMI support on the Mele A1000 ... Link: https://lore.kernel.org/r/ac39ee89-ea3a-4971-8cd7-8c4b2ecef39d.lettre@localhost Signed-off-by: Olof Johansson <olof@lixom.net>	2020-10-03 12:34:02 -07:00
Olof Johansson	ef3c139ba0	Second and final device tree updates towards 5.10-rc1 for TI K3 platform. ... -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE+KKGk1TrgjIXoxo03bWEnRc2JJ0FAl93K8EACgkQ3bWEnRc2 JJ1hhQ/+Kaak1RosL3a0AZ4tBPAkWm/CVduyKOxLZahBfHzD2pZkHhKyfwGBRFOn CoLCMTMrY19xnOkUYzUTu5bkoxvLI1YuAkvYG/Sx6yBZU4ImTlVpzmmkeE4nJYBI X8Z+oysSx7kgTVxmPbweDPVtUJ99G4yhWNlFp+v2rfWM+mCK6d6ELZkkJVQBS18l iD8rYlL9885CsowILycWGZ855z59DLxeIqy52K62+rhDaOgYz56ZnNYhWg+5RDPB ZOAvXhtMJHVUekorqD6i9FQqWfVda0rTR+KiDz4UBn8NLyFmmGbArl3bQ4CMg9+q Chm6Ri9f46uZYZU9bNny9rZtYfu5z6rvAS+kDaq3BwumMcSdy/ULjgP8UR0XJfHS sLWw1OmDHYf7V9YUXxKemSwySCKVbgoIwzZPu006fNovXKETsTi/Hu70EWEepkRF aLnjLqSxNBkdwQYy04bSzchPOaHLWWBNAczWABAQvg6pRvTQbK6+mGHnTheIM5Ve GH/qeVNWdhurVXlm76i8bHS7oBTfSSia2VVKZSuQOplruwjC8DHKkTeaMxDtXieX 1qGfT6jimkduTmzzW+u7OMc4TsP/PCsaFh5qk7QrmqvrXhQWJouCOuso/7LyTwqK 4rAN0LSq1kosDFjKCeEBsJ6uhc85DjNBYVFfftvhZDN2tFwJNr0= =tuvx -----END PGP SIGNATURE----- Merge tag 'ti-k3-dt-for-v5.10-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux into arm/dt Second and final device tree updates towards 5.10-rc1 for TI K3 platform. * tag 'ti-k3-dt-for-v5.10-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux: (23 commits) arm64: dts: ti: k3-j7200-common-proc-board: Add USB support arm64: dts: ti: k3-j7200-common-proc-board: Configure the SERDES lane function arm64: dts: ti: k3-j7200-main: Add USB controller arm64: dts: ti: k3-j7200-main.dtsi: Add USB to SERDES lane MUX arm64: dts: ti: k3-j7200-main: Add SERDES lane control mux dt-bindings: ti-serdes-mux: Add defines for J7200 SoC arm64: dts: ti: k3-j721e-common-proc-board: align GPIO hog names with dtschema arm64: dts: ti: k3-j7200-common-proc-board: Add support for eMMC and SD card arm64: dts: ti: k3-j7200-main: Add support for MMC/SD controller nodes arm64: dts: ti: k3-j7200-som-p0: Add HyperFlash node arm64: dts: ti: k3-j7200-mcu-wakeup: Add HyperBus node arm64: dts: ti: k3-j7200-common-proc-board: Add I2C IO expanders arm64: dts: ti: k3-j7200: Add I2C nodes arm64: dts: ti: k3-j7200-common-proc-board: add mcu cpsw nuss pinmux and phy defs arm64: dts: ti: k3-j7200-mcu: add mcu cpsw nuss node arm64: dts: ti: k3-j7200-main: add main navss cpts node arm64: dts: ti: k3-j7200: add DMA support arm64: dts: ti: Add support for J7200 Common Processor Board arm64: dts: ti: Add support for J7200 SoC dt-bindings: arm: ti: Add bindings for J7200 SoC ... Link: https://lore.kernel.org/r/20201002134559.orvmgbns57qlyn3i@akan Signed-off-by: Olof Johansson <olof@lixom.net>	2020-10-03 12:16:18 -07:00
Roger Quadros	bbcb0522ae	arm64: dts: ti: k3-j7200-common-proc-board: Add USB support ... The board uses lane 3 of SERDES for USB. Set the mux accordingly. The USB controller and EVM supports super-speed for USB0 on the Type-C port. However, the SERDES has a limitation that upto 2 protocols can be used at a time. The SERDES is wired for PCIe, QSGMII and USB super-speed. It has been chosen to use PCI2 and QSGMII as default. So restrict USB0 to high-speed mode. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/r/20200930122032.23481-7-rogerq@ti.com	2020-09-30 07:34:03 -05:00
Kishon Vijay Abraham I	e38a45b019	arm64: dts: ti: k3-j7200-common-proc-board: Configure the SERDES lane function ... First two lanes of SERDES is connected to PCIe, third lane is connected to QSGMII and the last lane is connected to USB. However, Cadence torrent SERDES doesn't support more than 2 protocols at the same time. Configure it only for PCIe and QSGMII. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/r/20200930122032.23481-6-rogerq@ti.com	2020-09-30 07:34:03 -05:00
Roger Quadros	6197d7139d	arm64: dts: ti: k3-j7200-main: Add USB controller ... j7200 has on USB controller instance. Add that. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/r/20200930122032.23481-5-rogerq@ti.com	2020-09-30 07:34:03 -05:00
Roger Quadros	9a09e6e9cf	arm64: dts: ti: k3-j7200-main.dtsi: Add USB to SERDES lane MUX ... The USB controller can be connected to one of the 2 lanes of SERDES0 using a MUX. Add a MUX controller node for that. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/r/20200930122032.23481-4-rogerq@ti.com	2020-09-30 07:34:02 -05:00
Roger Quadros	1509295295	arm64: dts: ti: k3-j7200-main: Add SERDES lane control mux ... The SERDES lane control mux registers are present in the CTRLMMR space. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/r/20200930122032.23481-3-rogerq@ti.com	2020-09-30 07:34:02 -05:00
Nishanth Menon	ffb0024ecd	Tag fix up for TI serdes mux definition introduced in 5.9 ... -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE+KKGk1TrgjIXoxo03bWEnRc2JJ0FAl9onNQACgkQ3bWEnRc2 JJ3YIw//VzEDb1AlwT40/LMd5i1wWP3mVbRf3oQMGHh0PXW8nM/OA1mD4f0br38e /32TeQvF9GsImQF2aUI2vN07cjZFKu3bm8vNmxdPIlQM/tZlL4lfiZAjVrQtc9XH +O2z0Y7/3MMf5mJe/kDD0AtTqcIk9nUH0bg8A+teN8QTl+cy/CAmzTbK5oEB6pYy 08zJlgZBqm4pbeSG4VZyfoTDRwSMg5LyGCG9Z5LgE8fjW9evIqnDJOoErsU+pZZr o/SWIQSWFi+Q82OsBuq3OrSwxwAsRI6T7rADcnrwJEFY6G9K+7GCxlYmgX8fq+Y0 OzIkMce/vmWp4wJ6z2OUbe36Ujvp/rdjhqFFCHuG0rr4czVGF5QKNokqP3BdZGQh 5IXvDXxMEJZlizNwyUyrruI4D4fLenpbudvOG7IJ+TtSJGNxp04gXda766M1B5+S iz4HSnhLq2oNYTyYotcpXeO/p47vuf+ZX258yxtgeMxpsG+nw5FTE1zPcRmNWnMj 7KVKyXrv/7aPlsoWyREQ4K7olDhiFqF7iLgvrqwuQzvOBwxV+5BeYlXT8JMjApQV Jm4evbZYI6Qs1gUWU6NvjHymQT9AHeA0da1AharGEBbGDY5nvepAyn0fTcvO3IwJ jpOSQa+OOlJok3nJy9SaNimQScwNogLsxvHHvWc7lsXmIMbOQSE= =rVCz -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE+KKGk1TrgjIXoxo03bWEnRc2JJ0FAl90exgACgkQ3bWEnRc2 JJ1txw//aYUykQ5kVn9amnpLFiqU6kgXSgKXJ1VsD4tZg6SSzCb1Oaf77OrNf5MW 6kSUIk+gED1UoxZHtwGup05WemOzLwOjStC4a4pa8NC5wJNL62eUkgYGCezJhs5j GgqrXV0IA2UbpyV5Sgns/4VYWiBArjdIDgs7t+ERoEmt/DvLykwdFAc2u3cA9pxW NXa0hDjW6Ff2Y6K6Owq8+rJxz9hzVkGBVFKnWSKNzZqUBSXGLE5lJmXwbn5r0clz KK7bN/4trrGRHYFUIWw4jMtg1h6E8pfOhoJ1Y0hTluFrpUwm37wRLW4LntmuawYD +upWZsp2GRLFFqzn+NQxCsDLBQDukfYa4nq7Ptv2sGSmvhBvLyTdKxzwTFm6fFEq SD4DLXLyDS/s09Ugc1TmIq0FQh1f3xEN+duOco7qA6ePCiy7Axx5CJT/tSR051dS bmqmyM0R65zynFXvKRE2CCPZ2Rpxkqxk8FLFsNh8AtO9d/8aJc7em5JoZF8F9OoC 9Rt3ixNP6Ny4Ya+i2OvW1IOFG+Z9A/cjPFhIQXI+S2HRMGGIAqmWGDivrKVQYMpO jLlKxa0prEm/zoihKaTz/WJhR5dMoEY8bsCdAxvrq9Ygd+g1HKkMkvDcqrs778qu KveMv39/6cei1zJ89bp+fFn6QW6JCaa05gKympNDc/YnrlRE5kc= =Hm9M -----END PGP SIGNATURE----- Merge tag 'ti-k3-dt-fixes-for-v5.9' into ti-k3-dts-next Merge fix up for TI serdes mux definition introduced in 5.9 as dependency for 5.10 series on J7200 USB. Signed-off-by: Nishanth Menon <nm@ti.com>	2020-09-30 07:32:50 -05:00
Michal Simek	9a19a39ee4	arm64: dts: zynqmp: Fix leds subnode name for zcu100/ultra96 v1 ... Fix the leds subnode names to match (^led-[0-9a-f]$|led). Similar change has been also done by commit 08dc0e5dd9 ("arm64: dts: meson: fix leds subnodes name"). The patch is fixing this warning: avnet-ultra96-rev1.dt.yaml: leds: 'ds2', 'ds3', 'ds4', 'ds5' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/1a69c3fa0291f991ffcf113ea222c713ba4d4ff0.1598264917.git.michal.simek@xilinx.com	2020-09-29 13:01:20 +02:00
Michal Simek	db7691f958	arm64: dts: zynqmp: Remove undocumented u-boot properties ... u-boot, DT properties are not documented anywhere in Linux DT binding that's why remove them. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/8ba339425b9c9f319bdedce7741367055a30713c.1598257720.git.michal.simek@xilinx.com Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>	2020-09-29 13:00:19 +02:00
Michal Simek	35292518cb	arm64: dts: zynqmp: Remove additional compatible string for i2c IPs ... DT binding permits only one compatible string which was decribed in past by commit 63cab195bf ("i2c: removed work arounds in i2c driver for Zynq Ultrascale+ MPSoC"). The commit aea37006e1 ("dt-bindings: i2c: cadence: Migrate i2c-cadence documentation to YAML") has converted binding to yaml and the following issues is reported: ...: i2c@ff030000: compatible: Additional items are not allowed ('cdns,i2c-r1p10' was unexpected) From schema: .../Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml fds ...: i2c@ff030000: compatible: ['cdns,i2c-r1p14', 'cdns,i2c-r1p10'] is too long The commit c415f9e830 ("ARM64: zynqmp: Fix i2c node's compatible string") has added the second compatible string but without removing origin one. The patch is only keeping one compatible string "cdns,i2c-r1p14". Fixes: c415f9e830 ("ARM64: zynqmp: Fix i2c node's compatible string") Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/cc294ae1a79ef845af6809ddb4049f0c0f5bb87a.1598259551.git.michal.simek@xilinx.com Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>	2020-09-29 12:59:23 +02:00
Michal Simek	dfff9066e6	arm64: dts: zynqmp: Rename buses to be align with simple-bus yaml ... Rename amba-apu and amba to AXI. Based on Xilinx ZynqMP TRM (Chapter 15) chip is "using the advanced eXtensible interface (AXI) point-to-point channels for communicating addresses, data, and response transactions between master and slave clients." Issues are reported as: ...: amba: $nodename:0: 'amba' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' From schema: .../dt-schema/dtschema/schemas/simple-bus.yaml ...: amba-apu@0: $nodename:0: 'amba-apu@0' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' From schema: .../dt-schema/dtschema/schemas/simple-bus.yaml Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/68f20a2b2bb0feee80bc3348619c2ee98aa69963.1598263539.git.michal.simek@xilinx.com Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>	2020-09-29 12:58:38 +02:00
Krzysztof Kozlowski	cbf5a878ae	arm64: dts: xilinx: align GPIO hog names with dtschema ... The convention for node names is to use hyphens, not underscores. dtschema for pca95xx expects GPIO hogs to end with 'hog' prefix. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200916155715.21009-8-krzk@kernel.org Signed-off-by: Michal Simek <michal.simek@xilinx.com>	2020-09-29 12:54:36 +02:00
Olof Johansson	f75ff2c7bc	mt8173: ... - make nor flash work - fix da9211 regulator modes mt8183: - add support for system companion processor mt8516: - set reset gpio for gpio expander in pumpkin board -----BEGIN PGP SIGNATURE----- iQJLBAABCAA1FiEEUdvKHhzqrUYPB/u8L21+TfbCqH4FAl9uC+IXHG1hdHRoaWFz LmJnZ0BnbWFpbC5jb20ACgkQL21+TfbCqH7c3w/+L6fmP/VXGl89AN7JG3J+45yo WCyjT+JnQIOvI38o6ueGet/I5M6uFNC3wLM9VKa3/9Jj8fxJuSpQQzxBojwKwEHG hqBUVlhC12WdHLtf15fulwmkuXOi731NbnRW6/lBWZ2dW8ZNqxRu7T5kRGuWgokk Uoo38SI81xFBaOBkYZy4S+MEZIWFsvD4wxehJKkb+yT+IRXEYUA8zGbzznLKnojQ XUMuGaoB6uJiW2dme19pwj0AeG/maYuD6XkOEqY6YHaF7GCY9dk+xBiys581M5wn 2/XpLoZu1jPQkPOlylwl5zc0TbVbZuqpESOVoCotSz+tO6OekNQQ8gouGzGjRU45 fZtVKI9M8hl4NKldtnPoqykGLnfgveFNu0Kz0sQ8t47JWP4y/lKnusRxsWptWpe/ RlKPHq/Hkg7yMEXsQoiOwGy4gOe5+2p29H4G/GcsRjY0fEaqs8s9mtwaYTzc4Wi6 TsI0FTudmp9BenCKLmctt3Cbp5VASN+pXMfZm5mXudC1CloLxMqDw5Ny0duKvxJ0 innCl38E4UpmTPBjsxdJ3UU7gJJjMwZas8oKsBkNBP7xbEKA1EqfX37Pg3TUBGJf sSY+UYWfhkYNtqSTXj/7uRvo1YRD3LZbt0QBNtDok3BxbExv695AWe3rRkKSkmiU tYYVlX0N76LXsJ3sCSk= =hAPZ -----END PGP SIGNATURE----- Merge tag 'v5.9-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt mt8173: - make nor flash work - fix da9211 regulator modes mt8183: - add support for system companion processor mt8516: - set reset gpio for gpio expander in pumpkin board * tag 'v5.9-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: arm64: dts: mt8183: update watchdog device node arm64: dts: mt8173: elm: Fix nor_flash node property arm64: dts: mediatek: fix tca6416 reset GPIOs in pumpkin arm64: dts: mt8183: add scp node arm64: dts: mt8173-elm: fix supported values for regulator-allowed-modes of da9211 Link: https://lore.kernel.org/r/1580bc76-b05a-ad29-1854-d2aca657c775@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>	2020-09-26 10:23:59 -07:00
Olof Johansson	9289beb8eb	arm64: dtc: amlogic updates for v5.10 ... - new boards: libretch s905x cc v2, Hardkernel ODROID-N2+ - vim3: sound updates -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEe4dGDhaSf6n1v/EMWTcYmtP7xmUFAl9t/bwACgkQWTcYmtP7 xmX/kg//Sk4td4460YcVXrkNJCZ5m7PXiOlJ/ATVz2pv8lb+bf7bOkYWR+pUyxv0 FERntgCgH8BlY+omNVRq3EduVjaaoeilKwCuaHgbGExy20dRLh8BhiYCqRKADnL5 dJ59HKntHh6S/7NbooYRgSdlE2uAmt2hdQx7mtJQZNlTraRCXs/NP3WmBrmOLbjS 1CDLk7iG0S7b6McsNwZnWje6aV01g53599aM1WRKgNbNl7hafnpTB3YB+IdI0wwK k1hX1ma77TmwXTk2CuSZh2rL0k22Gqd6kzMnH1x5rvSwhhpARDoqMDqCGTrcqbqJ Ziy8EXaVT/S8NkcPbdGQtu6vwlXjBskSA5bEqNylCdkpsghukbXTMug5fw3ftVWZ s67Vw/fFGEnzSINJ8uVQxMT6dkKRjkvSIYgukaAQG8Ni+xqfZfulbHkgo5HdVNvt 8YlgbhOx4dmPvZLvkjP3mzlaoZbPt2Fg+4XVPtHyXjK52ppjt08xzZ2xscq0APNG G/eF2+treEn305I3kmOK0flrPelpOy6BVcB6lyK6L3DsGYb/hoGI/55y0JvGFxwp j0i59X1b9LrBmxi8C96x5dQSzrzprnj6sI1aaTsereAJyuA6rZ6B+nN9bzj1Xfk+ 7/RsXzSJ/gkOudDgFFyjML8IqXhlhQull0y5+iiDib7vQ1XS/9A= =vrF9 -----END PGP SIGNATURE----- Merge tag 'amlogic-dt64' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt arm64: dtc: amlogic updates for v5.10 - new boards: libretch s905x cc v2, Hardkernel ODROID-N2+ - vim3: sound updates * tag 'amlogic-dt64' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: arm64: dts: meson: initial support for aml-s905x-cc v2 dt-bindings: arm: amlogic: add support for libretch s905x cc v2 arm64: dts: meson: add support for the ODROID-N2+ dt-bindings: arm: amlogic: add support for the ODROID-N2+ arm64: dts: meson: convert ODROID-N2 to dtsi arm64: dts: meson: vim3l: remove sound card definition arm64: dts: meson: vim3: make sound card common to all variants arm64: dts: meson: vim3: correct led polarity Link: https://lore.kernel.org/r/7h3636kjxd.fsf@baylibre.com Signed-off-by: Olof Johansson <olof@lixom.net>	2020-09-26 10:23:18 -07:00
Olof Johansson	a1c259cdb0	Qualcomm ARM64 DT updates for v5.10 ... Cleanup, refactor and modernize MSM8916 by sorting nodes, moving device and platform specific parts to their respective files, add and use labels for reference nodes and use IRQ defines. Migrate TCSR mutex off the depricated binding, add resin node for PM8916. Add LPASS clock controller for SC7180. Fix the LLCC reg, increase interconnect-cells, drop flags on MDSS irqs. Add interconnects for display, eMMC and SD-card, specify 'sustainable_power' for CPU thermal zones, improve pinconf states related to UART and Bluetooth. Add new DT for Lazor and Trogdor. Increase #interconnect-cells for SDM845 to allow tags, add OPP tables and power-domains for Venus and interconnects for display. Fix the ports on the HDMI nodes for DB845c and add DT for the Xiaomi Poco F1. Add interconnect providers, fix up primary USB's clock and use dt-binding defines for GPU clocks on SM8150. Add interconnect providers, CPUfreq, thermal configuration and missing uarts for SM8250. Fix up naming of debug uart, add always-on supply clock to gcc, fix up the sleep clock rate and define OPP tables for all QUP devices. Then add a new DeviceTree for the QRB5165 RB5 board. Enable watchdog on IPQ8074 and use the appropriate compatible for the PMU node. Enable DVFS support for IPQ6018. Finally correct the spelling of "interrupts" in MSM8992 uart node, fix missing # in PM660 #interrupt-cells, add second VFE power-domain to camss in MSM8996 and sort the Makefile. -----BEGIN PGP SIGNATURE----- iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAl9sGmAbHGJqb3JuLmFu ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3F7n4QANwKflwOuE+KDK5/SCNb T7xYWw8ZV1GylHh3E52I42EmpkNDojepBUcjGMy+CZecZzD6cmivKRPu//X6GYzE MCE+1Z6pUugiDFpcQ2xuY62H1nw+52FeiF9Ze9lITvsKv6nGb+9iVjwU34PXGxuj uzUCTwqjF/At52zEO+nU0GoN51r3KZgnQEaI/dgTiSV5m0mb8eIG29oq0qB7RTno mcM8SWcewUHJOJP0/MzdFVE1Vp1MyiL5U7ilKKCCBg5U2Jwzif7Ugv5ZqR3wQ1vD I3Si9WaLechmCUPWsc6xuysreIdzUrWg37gL+FUdWLj+eWQw6NWjdJDZQM/Zr1DC XLxHYVliVr164XwTbZOR+JjaJKBOd1b399N8PKGaDYmlHZqP4L81LbfNvB3rkH2o Y1NuKksicUWt9E6+tAIIceBxBbUW4T2z4FEqwd4edFYxknAk/kr0iVT796Unv9lT mcsZW7zjN7ob1hqRlUNgPk/u8zASz0/7kGTEyJAbf8Q8MsJSkqvteJpFo0xcVM0W ty0sC8g7yGgEkuz9Ou5KIXT/5ulinhR+NjoBi1bG8mtgkDnw4k2hyEIpNbuWx5iP 7CjM5ECDV5DK+Q1IXLDyQfrpUIRs9u9QOhoGuNvEztl9q/irJo26m0EEUrIoEgMI mH/AQkwMrY2x9aXGhtAjOxW9 =yiGd -----END PGP SIGNATURE----- Merge tag 'qcom-arm64-for-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm ARM64 DT updates for v5.10 Cleanup, refactor and modernize MSM8916 by sorting nodes, moving device and platform specific parts to their respective files, add and use labels for reference nodes and use IRQ defines. Migrate TCSR mutex off the depricated binding, add resin node for PM8916. Add LPASS clock controller for SC7180. Fix the LLCC reg, increase interconnect-cells, drop flags on MDSS irqs. Add interconnects for display, eMMC and SD-card, specify 'sustainable_power' for CPU thermal zones, improve pinconf states related to UART and Bluetooth. Add new DT for Lazor and Trogdor. Increase #interconnect-cells for SDM845 to allow tags, add OPP tables and power-domains for Venus and interconnects for display. Fix the ports on the HDMI nodes for DB845c and add DT for the Xiaomi Poco F1. Add interconnect providers, fix up primary USB's clock and use dt-binding defines for GPU clocks on SM8150. Add interconnect providers, CPUfreq, thermal configuration and missing uarts for SM8250. Fix up naming of debug uart, add always-on supply clock to gcc, fix up the sleep clock rate and define OPP tables for all QUP devices. Then add a new DeviceTree for the QRB5165 RB5 board. Enable watchdog on IPQ8074 and use the appropriate compatible for the PMU node. Enable DVFS support for IPQ6018. Finally correct the spelling of "interrupts" in MSM8992 uart node, fix missing # in PM660 #interrupt-cells, add second VFE power-domain to camss in MSM8996 and sort the Makefile. * tag 'qcom-arm64-for-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (75 commits) arm64: dts: qcom: sm8250: Add thermal zones and throttling support arm64: dts: qcom: sm8250: Add cpufreq hw node arm64: dts: qcom: sdm845: Add interconnects property for display arm64: dts: qcom: sm8250: Add EPSS L3 interconnect provider arm64: dts: qcom: sm8150: Add OSM L3 interconnect provider arm64: dts: qcom: sm8250: add interconnect nodes arm64: dts: qcom: sm8150: add interconnect nodes arm64: dts: qcom: sc7180: Increase the number of interconnect cells arm64: dts: qcom: sdm845: Increase the number of interconnect cells arm64: dts: qcom: Makefile: Sort lines arm64: dts: qcom: pm8916: Sort nodes arm64: dts: qcom: msm8916: Sort nodes arm64: dts: qcom: msm8916: Pad addresses arm64: dts: qcom: msm8916: Rename "x-smp2p" to "smp2p-x" arm64: dts: qcom: msm8916: Use more generic node names arm64: dts: qcom: msm8916: Add MSM8916-specific compatibles to SCM/MSS arm64: dts: qcom: msm8916: Minor style fixes arm64: dts: qcom: msm8916: Drop qcom,tcsr-mutex syscon arm64: dts: qcom: msm8916: Use IRQ defines, add IRQ types arm64: dts: qcom: msm8916: Fix MDP/DSI interrupts ... Link: https://lore.kernel.org/r/20200924040607.180039-1-bjorn.andersson@linaro.org Signed-off-by: Olof Johansson <olof@lixom.net>	2020-09-26 10:21:23 -07:00
Olof Johansson	99bf15c707	New boards NanoPi R2S, A95X-Z2 and more Rock-Pi4 variants. ... Khadas-edge additions and a some fixes. -----BEGIN PGP SIGNATURE----- iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAl9ryD0QHGhlaWtvQHNu dGVjaC5kZQAKCRDzpnnJnNEdgU20CACU6tSCmlWEQ2dK3KLavODfcs2GvBpNlUA9 xfoSmMcVbiFosmO7t9gSbJHkIqadMaU/XDZWU/aIcnnPffX3YnCSqRiRWmtw05PG 7kBwHgPOqWhNc9fB7saj/sxth39V/7WKl3qwGuEPUZSDPJ/ZO9008vM0d6kbIQbA ubZqFZA3fM847Ej5LJgJ1yY2adYPYL5b43b5y6H5Us1nXPt5ONHrSoLhLLeoCVk8 Ds+UdkLeu7zy2fDN4V6jhkEVFPgG2yq+xeDudIsFk1WXWsB7lO8yGdhPwfOrRire fsK3dGyO8dKvc8rhshTYwEPyJchrIIQsJFdqLBbVKeVW2mHxKtjC =WETP -----END PGP SIGNATURE----- Merge tag 'v5.10-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt New boards NanoPi R2S, A95X-Z2 and more Rock-Pi4 variants. Khadas-edge additions and a some fixes. * tag 'v5.10-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: add ir-receiver node to rk3399-khadas-edge arm64: dts: rockchip: add spiflash node to rk3399-khadas-edge arm64: dts: rockchip: Add support for FriendlyARM NanoPi R2S dt-bindings: Add doc for FriendlyARM NanoPi R2S arm64: dts: rockchip: replace status value "ok" by "okay" arm64: dts: rockchip: fix cpu-supply for rk3328-evb arm64: dts: rockchip: add rk3318 A95X Z2 board dt-bindings: arm: rockchip: add Zkmagic A95X Z2 description dt-bindings: Add vendor prefix for Shenzhen Zkmagic Technology Co., Ltd. arm64: dts: rockchip: Add Radxa ROCK Pi 4C support arm64: dts: rockchip: Add Radxa ROCK Pi 4B support arm64: dts: rockchip: Mark rock-pi-4 as rock-pi-4a dts dt-bindings: arm: rockchip: Update ROCKPi 4 binding arm64: dts: rockchip: change spdif fallback compatible on rk3308 arm64: dts: rockchip: Fix power routing to support POE on rk3399-roc-pc Link: https://lore.kernel.org/r/16010805.MhVyP8KKtY@diego Signed-off-by: Olof Johansson <olof@lixom.net>	2020-09-26 10:18:13 -07:00
Olof Johansson	5f7067bc3a	i.MX arm64 device tree change for 5.10: ... - New board/device support: Librem 5 phone, i.MX8MM DDR4 EVK, Variscite VAR-SOM-MX8MN SoM and Symphony board. - Add NWL MIPI DSI controller support for i.MX8MQ. - Several series from Krzysztof Kozlowski to clean and fix up i.MX8 based device trees according to DT schema. - A series from Michael Walle to add sl28cpld support for Kontron sl28 device based on LS1028A. - Add two parameters for Samsung picophy tuning on imx8mm-evk and imx8mn-evk boards. - Add more thermal zones for Layerscape SoCs. - Various random update and minor fix-ups. -----BEGIN PGP SIGNATURE----- iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl9q8W0UHHNoYXduZ3Vv QGtlcm5lbC5vcmcACgkQUFdYWoewfM4AhQf+L6avHelgOvIbZFqv3EJEPsCZgTzQ ryXDfdC+x5tpWWdd2ulu3XevaNSWpDwrmmNEKr0jqehsRDQz/Q+/H13DZgz9qALy 4vWyd6eY16pY38bTHC+Bf57LsC5scbpwkt/2gdy2oh73p4R0GwrBNp2CLo9ATduw QoVY9+5AOCilinI0Smqg/a2o1UeDoUSwzfnlEwA6hlx5cR7mla5wM6mRX8DNaFO3 zEes8mpLaWfxWw256NPMUL9RTgVTaAPaR/hboN3DYjoUDSinv+5zxKbJDMavG5Ok 1uG/T0g+XbvQJbOz1CDI4gI0tRgqWAJMtYCjH62m6DXBmajOaUcHi/Il7A== =XIpX -----END PGP SIGNATURE----- Merge tag 'imx-dt64-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX arm64 device tree change for 5.10: - New board/device support: Librem 5 phone, i.MX8MM DDR4 EVK, Variscite VAR-SOM-MX8MN SoM and Symphony board. - Add NWL MIPI DSI controller support for i.MX8MQ. - Several series from Krzysztof Kozlowski to clean and fix up i.MX8 based device trees according to DT schema. - A series from Michael Walle to add sl28cpld support for Kontron sl28 device based on LS1028A. - Add two parameters for Samsung picophy tuning on imx8mm-evk and imx8mn-evk boards. - Add more thermal zones for Layerscape SoCs. - Various random update and minor fix-ups. * tag 'imx-dt64-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (71 commits) arm64: dts: imx8mq-librem5: correct GPIO hog property arm64: dts: imx8mm-var-som-symphony: Drop wake-up source from RTC arm64: dts: imx8mq: correct interrupt flags arm64: dts: imx8mn: correct interrupt flags arm64: dts: imx8mm: correct interrupt flags arm64: dts: imx8mm-var-som-symphony: fix ptn5150 interrupts arm64: dts: layerscape: correct watchdog clocks for LS1088A arm64: dts: freescale: sl28: enable fan support arm64: dts: freescale: sl28: enable LED support arm64: dts: freescale: sl28: map GPIOs to input events arm64: dts: freescale: sl28: enable sl28cpld arm64: dts: imx8mq-evk: Add MIPI DSI support arm64: dts: layerscape: Add label to pcie nodes arm64: dts: imx8mn-var-som-symphony: Add Variscite Symphony board with VAR-SOM-MX8MN arm64: dts: imx8mn-var-som: Add Variscite VAR-SOM-MX8MN System on Module arm64: dts: imx8mn-ddr4-evk: Remove unneeded PMIC pin configuration arm64: dts: imx8mm-var-som-symphony: Adjust ethernet pin configuration arm64: dts: imx8mm-var-som-symphony: Remove unneeded i2c3 properties arm64: dts: imx8mm-var-som-symphony: Drop unused gpioledgrp arm64: dts: imx8mq-librem5: Add interrupt-names to ti,tps6598x ... Link: https://lore.kernel.org/r/20200923073009.23678-5-shawnguo@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>	2020-09-26 10:17:45 -07:00
Olof Johansson	5310d705a9	Device tree updates towards 5.10-rc1 for TI K3 platform. ... -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE+KKGk1TrgjIXoxo03bWEnRc2JJ0FAl9p/FMACgkQ3bWEnRc2 JJ2WQxAAg2Amv8rpc1e0PWFQdRf374rZ6KpjtsIm7fXX6PMA39G8tcBmQVgC7xLN a+bMceoBJatq8pUxBH91UluMZmG+cH3yzp0rgmP7uZSHPecOgkXhMUxdDwy0+hFj xKClp/j9zdma8Zab/gG3h4G6NPw6aBOFxkOkXW7pKCXcRNYSyqiIilafCTfV1Z1C A5rETY/FKjXBhT0N9702MooaPXq00cxcKwqO6nTCJzK8X3d/GhDD+QsabVteVN9H S+45r8KYxw7JCgt34EUW/LLrexnMOKCLjudcWE7FWMGb0W+KGnuxFUfRpGkbB5jU zH+yXiATBQFJOt1+KkxkS7osjf5jbNLsJP9dD8kMYsMEzd0TAQ9lgoVBBMnzUCPf 68hYOc2kUkQaxOTZ+rhJjz5jbwUjADJ5jr8lJyjMIwey6Ne8BoAgN5Twpj4h58K8 eFlVIOJ9mpsRLy1GCBgw4VohN+6bCO6K2p69CXgseKfj7JJ+5mtgNA1fVLQ16yB6 wqdld12bWg83xuI6+pe6JYHVnMpgN2sUn6+uPMIM2YuZBXFTp2fqCSLAqaZeCMna 37O7Yi3wXgS08IctTRkUNjTfBKzAXebO/x4Rko2/OdUNcYJh3LmFinbU1WY2wEND FXWd+GFL2DdmuF/09l0pqFKzvjdUeZMfcI3EeN3KJnNGZoWue7o= =7wth -----END PGP SIGNATURE----- Merge tag 'ti-k3-dt-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux into arm/dt Device tree updates towards 5.10-rc1 for TI K3 platform. * tag 'ti-k3-dt-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux: (23 commits) arm64: dts: ti: k3-j721e-common-proc-board: Configure the PCIe instances arm64: dts: ti: k3-j721e-main: Add PCIe device tree nodes arm64: dts: ti: k3-*: Fix up node_name_chars_strict warnings arm64: dts: ti: k3-am65-wakeup: Use generic temperature-sensor for node name arm64: dts: ti: k3-am65-base-board Use generic camera for node name instead of ov5640 arm64: dts: ti: k3-*: Use generic pinctrl for node names arm64: dts: ti: k3-am65*: Use generic clock for syscon clock names arm64: dts: ti: k3-am65*: Use generic gpio for node names arm64: dts: ti: k3-am65-main: Use lower case hexadecimal arm64: dts: ti: k3-j721e: Use lower case hexadecimal arm64: dts: ti: k3-am65: restrict PCIe to Gen2 speed arm64: dts: ti: k3-j721e-som-p0: Reserve memory for IPC between RTOS cores arm64: dts: ti: k3-j721e-som-p0: Add DDR carveout memory nodes for C71x DSP arm64: dts: ti: k3-j721e-som-p0: Add mailboxes to C71x DSP arm64: dts: ti: k3-j721e-main: Add C71x DSP node arm64: dts: ti: k3-j721e-som-p0: Add DDR carveout memory nodes for C66 DSPs arm64: dts: ti: k3-j721e-som-p0: Add mailboxes to C66x DSPs arm64: dts: ti: k3-j721e-main: Add C66x DSP nodes arm64: dts: ti: k3-j721e-som-p0: Move mailbox nodes from board dts file arm64: dts: ti: k3-j721e-main: Add crypto accelerator node ... Link: https://lore.kernel.org/r/20200922134722.2y5kqxu4lghbwp5u@akan Signed-off-by: Olof Johansson <olof@lixom.net>	2020-09-26 10:15:12 -07:00
Olof Johansson	6cd19012d0	Qualcomm ARM64 DT fixes for v5.9 ... This fixes the OPP table for SDM845 QUP devices to bring back Bluetooth support, disables SMMU on SDM630 to make the devices boot again, disables the eMMC controller on Kitakami to prevent permanent damage and fixes a typo in the pm660. -----BEGIN PGP SIGNATURE----- iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAl9pPacbHGJqb3JuLmFu ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3F820P/Ry8VzhQqj9G+jivcGyN M62rUcN1vkPQlc6NwtqxeUtIwrORIo8xIV5QH7urNO5PhzZuA/E06tedqmlfGkV9 znq5NGm22BICkgpN/tFOTM01aOSwyOZ3QEcxOslkCHjSlulwJsSYbG8A/PKtLzG0 nQSy4mYrNDg4Yl39M1PDapYKLAAJvwxaQvrMyaXOeoZwARy/wexb5p4IyBJqUdel xVg8Y7KPNHkXClnWS6rfTumcsgCksnU+ww3BQbPnWs+u95uBuC7oGbxuAPq2to+i uOa8TfLuorcpHEaKTrQIsvBoDYQER+o+JrLaoWOygDIW/GPVQiPlzj4f4kavXpOm NFEu3BE6TRSaCPP+gK/18qeiJx5WooEuhffzVwxyfhhig5Y95dsLzzSKB8kLiyL5 4iBFT8fmSNbgrehN5izZ57Qvy7ugID3/B08pwYyEn9fgCHmsVQh0l5QnwvEQHDx9 wq1HIuLpdIln34v9aB+dAT91xPNIzOK1CAs+bGLvlPsII8eRfKI4L5ABU715GNJP Du1B0fY8cwrm2iOmmERkrjhJJgOZx3AR8wFM1Why5LY2KHKQBysNj+EpuO+3CG+N fJGgV4B5odBtIKG9Apd9jA8KjTD7Q1AQMKGHS+xyxghOlf3pmWmvxPGYMZoRXwiL zm/u4fN8sLmAEk9iGgAPTSUL =1HTr -----END PGP SIGNATURE----- Merge tag 'qcom-arm64-fixes-for-5.9' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes Qualcomm ARM64 DT fixes for v5.9 This fixes the OPP table for SDM845 QUP devices to bring back Bluetooth support, disables SMMU on SDM630 to make the devices boot again, disables the eMMC controller on Kitakami to prevent permanent damage and fixes a typo in the pm660. * tag 'qcom-arm64-fixes-for-5.9' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm64: dts: qcom: pm660: Fix missing pound sign in interrupt-cells arm64: dts: qcom: kitakami: Temporarily disable SDHCI1 arm64: dts: sdm630: Temporarily disable SMMUs by default arm64: dts: sdm845: Fixup OPP table for all qup devices Link: https://lore.kernel.org/r/20200922000521.39621-1-bjorn.andersson@linaro.org Signed-off-by: Olof Johansson <olof@lixom.net>	2020-09-26 10:10:47 -07:00
Olof Johansson	190b05d751	Two fixes for the Allwinner SoCs, one for the H5 GPU support and one for ... a misconfigured regulator on the Bananapi M2 Ultra. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCX2jLlQAKCRDj7w1vZxhR xfeOAP9HaamZwsHuTm+4FYLhJwUe44c1cHmnRTA49I8ifWaAqwEAt0+SfFue9GG7 ToKUFegAf7NP2h82QB04a72wHBo8CQk= =uA2F -----END PGP SIGNATURE----- Merge tag 'sunxi-fixes-for-5.9-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes Two fixes for the Allwinner SoCs, one for the H5 GPU support and one for a misconfigured regulator on the Bananapi M2 Ultra. * tag 'sunxi-fixes-for-5.9-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: h5: remove Mali GPU PMU module ARM: dts: sun8i: r40: bananapi-m2-ultra: Fix dcdc1 regulator Link: https://lore.kernel.org/r/8a436328-b844-4599-8695-ab2088a00ade.lettre@localhost Signed-off-by: Olof Johansson <olof@lixom.net>	2020-09-26 10:09:39 -07:00
Olof Johansson	abc7220b22	Tag fix up for TI serdes mux definition introduced in 5.9 ... -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE+KKGk1TrgjIXoxo03bWEnRc2JJ0FAl9onNQACgkQ3bWEnRc2 JJ3YIw//VzEDb1AlwT40/LMd5i1wWP3mVbRf3oQMGHh0PXW8nM/OA1mD4f0br38e /32TeQvF9GsImQF2aUI2vN07cjZFKu3bm8vNmxdPIlQM/tZlL4lfiZAjVrQtc9XH +O2z0Y7/3MMf5mJe/kDD0AtTqcIk9nUH0bg8A+teN8QTl+cy/CAmzTbK5oEB6pYy 08zJlgZBqm4pbeSG4VZyfoTDRwSMg5LyGCG9Z5LgE8fjW9evIqnDJOoErsU+pZZr o/SWIQSWFi+Q82OsBuq3OrSwxwAsRI6T7rADcnrwJEFY6G9K+7GCxlYmgX8fq+Y0 OzIkMce/vmWp4wJ6z2OUbe36Ujvp/rdjhqFFCHuG0rr4czVGF5QKNokqP3BdZGQh 5IXvDXxMEJZlizNwyUyrruI4D4fLenpbudvOG7IJ+TtSJGNxp04gXda766M1B5+S iz4HSnhLq2oNYTyYotcpXeO/p47vuf+ZX258yxtgeMxpsG+nw5FTE1zPcRmNWnMj 7KVKyXrv/7aPlsoWyREQ4K7olDhiFqF7iLgvrqwuQzvOBwxV+5BeYlXT8JMjApQV Jm4evbZYI6Qs1gUWU6NvjHymQT9AHeA0da1AharGEBbGDY5nvepAyn0fTcvO3IwJ jpOSQa+OOlJok3nJy9SaNimQScwNogLsxvHHvWc7lsXmIMbOQSE= =rVCz -----END PGP SIGNATURE----- Merge tag 'ti-k3-dt-fixes-for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux into arm/fixes Tag fix up for TI serdes mux definition introduced in 5.9 * tag 'ti-k3-dt-fixes-for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux: (637 commits) arm64: dts: ti: k3-j721e: Rename mux header and update macro names Linux 5.9-rc3 genirq/matrix: Deal with the sillyness of for_each_cpu() on UP fsldma: fix very broken 32-bit ppc ioread64 functionality kernel.h: Silence sparse warning in lower_32_bits cifs: fix check of tcon dfs in smb1 KVM: arm64: Set HCR_EL2.PTW to prevent AT taking synchronous exception KVM: arm64: Survive synchronous exceptions caused by AT instructions KVM: arm64: Add kvm_extable for vaxorcism code arm64: vdso32: make vdso32 install conditional arm64: use a common .arch preamble for inline assembly mfd: mfd-core: Ensure disabled devices are ignored without error usb: storage: Add unusual_uas entry for Sony PSZ drives md/raid5: make sure stripe_size as power of two powerpc/32s: Disable VMAP stack which CONFIG_ADB_PMU io_uring: don't bounce block based -EAGAIN retry off task_work io_uring: fix IOPOLL -EAGAIN retries arm64/cpuinfo: Remove unnecessary fallthrough annotation media: dib0700: Fix identation issue in dib8096_set_param_override() hwmon: (gsc-hwmon) Scale temperature to millidegrees ... Link: https://lore.kernel.org/r/20200921125402.mtwypblhb45a6ssh@akan Signed-off-by: Olof Johansson <olof@lixom.net>	2020-09-26 10:08:48 -07:00
Olof Johansson	12f0f6f654	Samsung DTS ARM64 changes for v5.10, part two ... Minor cleanups: removal of undocumented I2S properties, alignment of OPP table node name with dtschema. -----BEGIN PGP SIGNATURE----- iQJEBAABCgAuFiEE3dJiKD0RGyM7briowTdm5oaLg9cFAl9nefUQHGtyemtAa2Vy bmVsLm9yZwAKCRDBN2bmhouD10wPD/9KA3aaph63wzNeVnktLt8U71Va5OilCtb3 McsKUv0ibQJ1YXFGMbChpG0rwsExJE2gA+Ur0YdwgoEtQvYi1wwKTTCyWLejzNRT uWITxCodPeXDUnNG7TM7BIefb/bO1L1bhjuGLF0S2ThiPMW19+cDXUDZIQBC9aSn NmHajddNs+S7x7FnHHRgdTuQ+aTvcFPWzshtLAOEbfOEf4VyyFjRrK0XRfqPpc/i n5vmj0uaGuet3b0mODvnzPn2LlajWQN3B4XGR+wCphFBAwl15a0ZI3OKZsshF4UP OXm6pd7hbCOHtByKAjq8zBVTYsNUiSyXvtRmujhQWsa8hqqnKd4JkuddRGDMN/Xj zUGzo/71m8Tv7IfeTR1W+DQUFQnBM8n5FjbvXLA251TMZu99Fwg9ZVRZEmpqclyR xFr4EAglBjpvmW5bYSHdBTJu5kf2g8eizGkf/951UvQythGpkn4dQUGBDfsvY/hm Dr30owmE84waThpWVOjXTnZgAw1z062DnVqj5NKg1wXRCQcb1BfqwzF94Qjbe7Ce K4+SW3eVFx4oclmBja8a7PlVh+avF1zbx81Rpi04WFACo2DrQNU0YCzlUpNhD9DD o2ZI1M2odP7HXtKXg46CELhxZvpCubg4jH35EHj0VFIwTVL3bCGor48cE9rtrjQ6 7YRDlPWvnQ== =RS85 -----END PGP SIGNATURE----- Merge tag 'samsung-dt64-5.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt Samsung DTS ARM64 changes for v5.10, part two Minor cleanups: removal of undocumented I2S properties, alignment of OPP table node name with dtschema. * tag 'samsung-dt64-5.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: arm64: dts: exynos: Align OPP table name with dt-schema arm64: dts: exynos: Remove undocumented i2s properties in Exynos5433 Link: https://lore.kernel.org/r/20200920160705.9651-4-krzk@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>	2020-09-26 10:02:59 -07:00
Olof Johansson	dd59aed76d	arm64: tegra: Changes for v5.10-rc1 ... This set of changes fixes some minor issues in existing device trees and adds ID EEPROMs on the Jetson Xavier NX. All ID EEPROMs are now labelled to allow them to be detected by software. It also adds support for the Tegra234 VDK board, which is a pre-silicon platform for the upcoming Orin SoC. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAl9ky48THHRyZWRpbmdA bnZpZGlhLmNvbQAKCRDdI6zXfz6zoVVtEACJcW6ztbQiqrksFdVW+8wlT/EZwNwr qwwjGvy0ovJIYAPTB+XhGllUp17QR2EVzdGJW9Q8mr92QRpoQxSg3yB3BaJWsMoz AH+9qkQoRE5F+aFwO2l8kTBDswyiOQCLxsiDSCcCWTHtvAQOl/K2HjG+4kxtko+C 0in+p67PG0t4qanjeTApWEWXjfiXBpM0bcv89TKK0SO+k+zsjupEZeOnVIbEpGTa SMjKm/0l0jZIEMoweqX3H0jpTBvqE6IjLm4EAbCfLJrhDEIQe50WkNpw2CVaCZy6 2Mjnv7Gr/XO3MKmM4stLYTZ9eu5qDa7wGrQT/mXZt7kEc3L85rGZGyWQm5bCmspa mSKZ+swtegkEBBofOabxcCDi0V9KxDiba3hwv4mr17qMjj7VBK5le3JhUS19qnZ8 Osu81JqKrDjfkmxtqSnJEeTTVwxBG09WQ5lME9FRBqH9P5Y1L7yCAuqPLzYhXxtj KAcqveVzoMMi2YIp4Rt07seWsHhuNqkY9XWtPWrgubGtU1AKYXWHYDojefyo1VUq 1bOkzSa+ZVBwZuRmdgn2vxbeJnexeTAPolJp4WCpJpSGJbiFKNqhh5scjjfSviGS PfOITtuJgaxoqEZRhCdF/VM2+YSjjVljRkiE6b8W0+eKkeQKzzDvJIDnOqeb7PGX 1gJniuIR25eShg== =zeT7 -----END PGP SIGNATURE----- Merge tag 'tegra-for-5.10-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt arm64: tegra: Changes for v5.10-rc1 This set of changes fixes some minor issues in existing device trees and adds ID EEPROMs on the Jetson Xavier NX. All ID EEPROMs are now labelled to allow them to be detected by software. It also adds support for the Tegra234 VDK board, which is a pre-silicon platform for the upcoming Orin SoC. * tag 'tegra-for-5.10-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: arm64: tegra: Initial Tegra234 VDK support arm64: tegra: Populate EEPROMs for Jetson Xavier NX arm64: tegra: Add label properties for EEPROMs arm64: tegra: Add DT binding for AHUB components arm64: tegra: Enable ACONNECT, ADMA and AGIC on Jetson Nano arm64: tegra: Properly size register regions for GPU on Tegra194 arm64: tegra: Use valid PWM period for VDD_GPU on Tegra210 arm64: tegra: Describe display controller outputs for Tegra210 arm64: tegra: Disable SD card write-protection on Jetson Nano arm64: tegra: Add VBUS supply for micro USB port on Jetson Nano arm64: tegra: Wire up pinctrl states for all DPAUX controllers arm64: tegra: Add ID EEPROMs on Jetson AGX Xavier Link: https://lore.kernel.org/r/20200918150303.3938852-5-thierry.reding@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>	2020-09-26 10:01:52 -07:00
Olof Johansson	0b69d912b3	Renesas ARM DT updates for v5.10 (take two) ... - PCIe endpoint support for the RZ/G2H SoC, - SATA support for the HopeRun HiHope RZ/G2H board, - Increase support (CAN, LED, SPI NOR, VIN, VSP) for the RZ/G1H SoC on the iWave Qseven board (G21D), and its camera add-on board, - Initial support for the R-Car V3U SoC on the Falcon CPU and BreakOut boards, - HDMI display and sound support for the R-Car M3-W+ SoC on the Salvator-XS board, - Digital Radio Interface (DRIF) support for the R-Car E3 SoC, - Minor fixes and cleanups. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCX2SkmQAKCRCKwlD9ZEnx cIXNAP0XqvKJP7xGjQ1ORyePB1nWZtebVqGoQFxpvqwznMNZlAD7BIRlATo4LYpu LNMya5sk85WAhZNbpkHwR++3/8m+mgE= =Va2A -----END PGP SIGNATURE----- Merge tag 'renesas-arm-dt-for-v5.10-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt Renesas ARM DT updates for v5.10 (take two) - PCIe endpoint support for the RZ/G2H SoC, - SATA support for the HopeRun HiHope RZ/G2H board, - Increase support (CAN, LED, SPI NOR, VIN, VSP) for the RZ/G1H SoC on the iWave Qseven board (G21D), and its camera add-on board, - Initial support for the R-Car V3U SoC on the Falcon CPU and BreakOut boards, - HDMI display and sound support for the R-Car M3-W+ SoC on the Salvator-XS board, - Digital Radio Interface (DRIF) support for the R-Car E3 SoC, - Minor fixes and cleanups. * tag 'renesas-arm-dt-for-v5.10-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (24 commits) arm64: dts: renesas: r8a774c0: Fix MSIOF1 DMA channels arm64: dts: renesas: r8a77990: Fix MSIOF1 DMA channels arm64: dts: renesas: r8a77990: Add DRIF support ARM: dts: r8a7742-iwg21d-q7-dbcm-ca: Add can0 support to camera DB ARM: dts: r8a7742: Add VSP support arm64: dts: renesas: Drop superfluous pin configuration containers arm64: dts: renesas: r8a77961: salvator-xs: Add HDMI Sound support arm64: dts: renesas: r8a77961: salvator-xs: Add HDMI Display support arm64: dts: renesas: r8a77961: Add HDMI device nodes arm64: dts: renesas: r8a77961: Add DU device nodes arm64: dts: renesas: r8a77961: Add VSP device nodes arm64: dts: renesas: r8a77961: Add FCP device nodes arm64: dts: renesas: Fix pin controller node names ARM: dts: renesas: Fix pin controller node names arm64: dts: renesas: Add Renesas Falcon boards support arm64: dts: renesas: Add Renesas R8A779A0 SoC support ARM: dts: r8a7742-iwg21d-q7: Enable SD2 LED indication ARM: dts: r8a7742-iwg21d-q7: Add can1 support to carrier board ARM: dts: r8a7742-iwg21d-q7: Add SPI NOR support ARM: dts: r8a7742: Add VIN DT nodes ... Link: https://lore.kernel.org/r/20200918124800.15555-2-geert+renesas@glider.be Signed-off-by: Olof Johansson <olof@lixom.net>	2020-09-26 09:59:32 -07:00
Krzysztof Kozlowski	e90ac411dc	arm64: dts: apm: add required gpio-cells to DW APB GPIO controller port ... The Synopsys DesignWare APB GPIO controller port must have gpio-cells property, as pointed by dtschema: arch/arm64/boot/dts/apm/apm-mustang.dt.yaml: gpio@1c024000: gpio-controller@0: '#gpio-cells' is a required property Link: https://lore.kernel.org/r/20200917165040.22908-2-krzk@kernel.org Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>	2020-09-26 09:50:18 -07:00
Krzysztof Kozlowski	61163895f3	arm64: dts: apm: drop unused reg-io-width from DW APB GPIO controller ... The Synopsys DesignWare APB GPIO controller driver does not parse reg-io-width and dtschema does not allow it so drop it to fix dtschema warnings like: arch/arm64/boot/dts/apm/apm-mustang.dt.yaml: gpio@1c024000: 'reg-io-width' does not match any of the regexes: '^gpio-(port|controller)@[0-9a-f]+$', 'pinctrl-[0-9]+' Link: https://lore.kernel.org/r/20200917165040.22908-1-krzk@kernel.org Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>	2020-09-26 09:50:07 -07:00
Olof Johansson	b042dc7424	SoCFPGA DTS updates for v5.10 ... - Increase shared-dma-pool size to 32MB - Add ptp_ref clock properties to the ethernet nodes on Stratix10 and Agilex -----BEGIN PGP SIGNATURE----- iQJIBAABCgAyFiEEoHhMeiyk5VmwVMwNGZQEC4GjKPQFAl9ieBkUHGRpbmd1eWVu QGtlcm5lbC5vcmcACgkQGZQEC4GjKPQxIA//VUV1yy5PWxHQSEVF47XinZFN9H/2 pdxPF5O9z8S0CuHWQlYYi53wwLjw2cM44B78PbLx4dtQnmno1gaQQsUTuMfDjUeN E9DwTJJTonOYib7dIwLRh33mRSd8WA8Hp2up3Ban2X14Biec9VphTDo5ECXUxPk2 +ajsDkFxBTREfTh8fwnJvZnj5ApimHfTvODEpDSdPqVY1vXCUIbMCHbWrTnCabck qvLzamZU6k7/dccEiv9eXnpN/WVj4jGgdHe3x8XApIEhqmdHqgP7okH1n8sZDkr/ S0ew63ST+rD24+SC+OodWEpRGNkmfzzfi0I7aIVw2h3Nh+fwpx6HDQifnL5HtJKM lWqnVR9szxdwRRafqXMmG41qXmu6ZomD5TNGkPIfZJ2Ib67xoXpZB5WtQkDbu34r kBWQsLiEkN1mPjUs0htqskaPRc228zHMvTNd9OC9917/V7DgMg5dMEMbO5KUHCDv alX/rcYOXkUDEyCjKJ9zEAvYeO8Fq0pF9Onz8euYNQQCk9efBf/r3z9pwd7kJ8b9 Tkg2SabimR+3qN6luiPwdaWGWk2MF6+JMQqKywanG+5DWT540Ka++IF/CR2KJh4J 9F81oAF/Z94ATQ8F95bKogrSfeGj/jhwL5T0qIejOvaWW70Jb/C1DUBuEyl6g6ek oYXdZbiSmXvI1R8= =N0jI -----END PGP SIGNATURE----- Merge tag 'socfpga_dts_update_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt SoCFPGA DTS updates for v5.10 - Increase shared-dma-pool size to 32MB - Add ptp_ref clock properties to the ethernet nodes on Stratix10 and Agilex * tag 'socfpga_dts_update_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: arm64: dts: stratix10/agilex: add the ptp_ref clock arm64: dts: agilex: increase shared memory size to 32Mb Link: https://lore.kernel.org/r/20200916204422.30897-1-dinguyen@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>	2020-09-26 09:48:13 -07:00
Olof Johansson	38c419037a	Sparx5 DT updates for Linux 5.10 ... - Add public repo to MAINTAINERS - Add SPI controller and devices - Add eMMC controller and devices - Add temperature sensor -----BEGIN PGP SIGNATURE----- iJEEABYIADkWIQQaBzOicklHovJvajA3MaYaSgcc9AUCX2HdrxscbGFycy5wb3Zs c2VuQG1pY3JvY2hpcC5jb20ACgkQNzGmGkoHHPSyFgD8CeApRk+Nft2RMt72TyLW A/sGGCdqnhQqp7Sswpf625wA/idFqzcEfwQNVar29MBJ3A6Uu213DK4b/lnkw9cm Mg4E =Ln9n -----END PGP SIGNATURE----- Merge tag 'sparx5-dt-5.10' of https://github.com/microchip-ung/linux-upstream into arm/dt Sparx5 DT updates for Linux 5.10 - Add public repo to MAINTAINERS - Add SPI controller and devices - Add eMMC controller and devices - Add temperature sensor * tag 'sparx5-dt-5.10' of https://github.com/microchip-ung/linux-upstream: arm64: dts: sparx5: Add spi-nand devices arm64: dts: sparx5: Add spi-nor support arm64: dts: sparx5: Add SPI controller and associated mmio-mux MAINTAINERS: Add git tree for Sparx5 arm64: dts: sparx5: Add hwmon temperature sensor arm64: dts: sparx5: Add Sparx5 eMMC support Link: https://lore.kernel.org/r/878sda2dj0.fsf@microchip.com Signed-off-by: Olof Johansson <olof@lixom.net>	2020-09-26 09:47:12 -07:00
Olof Johansson	39d601ba9a	ARM64: DT: Hisilicon ARM64 SoCs DT updates for 5.10 ... - Change the status properties from "ok" to "okay" for all the hisilicon SoCs - Update the SP805 nodes to have the correct clocks and clock names for the hi3660 and hi6220 SoCs -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJfYWmLAAoJEAvIV27ZiWZcOhgP+gNhGuy1F1+P1LnvKDo5Hi/g a2mf6NfySPhm9Cg/2qSQkI5F1LnQayTBWEv850oL21CzqKZ8cpifs4HuQRZDwV4V L2MIB9/cQRKfj9cONOuRYjNNc7CZl+FmVWCIn/WV34x4xYs7QmH04n4VwBXP2VRx 6UgZ96tMsT0LB+ni9qLdxBn8F8loF7YgJCcncOeViGic+TEa8qw9kDvXcqibuXIF R5LbhLfE1zZCBi1gveLHXIN6kAF+Zk27sZU+MwouhuYC2kp1EQ06bb0XJ8abiT93 iLiUQXvPfj9tcsZ4P6XRGODgOkrl/JU/mtxCyNziBXOU5fgnBi8TniQQVn/+0Oy5 XMtgWMFphRY5q/rnHCLgDVvp8At6mIOFjXx8+CBxoxhXEglpo2P5JQ3IXDOt/ZXA vm/68IbE9PDm/O0bzN2gOIbVBZAttydU+oL6Otpo4l1W1xETDUskH6kGt5SYeiO2 HsTTfcKvORXmRmtfBoWMO3WfO3uRlSCtj5DygxBPn7cCNcdaaBWc9N1yVkMhhT2x FoDU2uA4q7T8DJRaHSArhdZJk0LHdgGmaT8C8ksMkQ+4aAPQi/lzqq9KG4LuyO7p j+F+7sKAsvOGiMcucpGilMX2QCCuicZRYs+d7QPslaiOywihHFwb3f/1c5BMpTam 4D38UFWUX3RxNV8nyBWe =/Wrz -----END PGP SIGNATURE----- Merge tag 'hisi-arm64-dt-for-5.10' of git://github.com/hisilicon/linux-hisi into arm/dt ARM64: DT: Hisilicon ARM64 SoCs DT updates for 5.10 - Change the status properties from "ok" to "okay" for all the hisilicon SoCs - Update the SP805 nodes to have the correct clocks and clock names for the hi3660 and hi6220 SoCs * tag 'hisi-arm64-dt-for-5.10' of git://github.com/hisilicon/linux-hisi: arm64: dts: hisilicon: Fix SP805 clocks arm64: dts: hisilicon: replace status value "ok" by "okay" Link: https://lore.kernel.org/r/5F617134.3050705@hisilicon.com Signed-off-by: Olof Johansson <olof@lixom.net>	2020-09-26 09:46:10 -07:00
Krzysztof Kozlowski	197bbae9ed	arm64: dts: ti: k3-j721e-common-proc-board: align GPIO hog names with dtschema ... The convention for node names is to use hyphens, not underscores. dtschema for pca95xx expects GPIO hogs to end with 'hog' prefix. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/r/20200916155715.21009-7-krzk@kernel.org	2020-09-25 06:59:31 -05:00
Faiz Abbas	a2178b83ae	arm64: dts: ti: k3-j7200-common-proc-board: Add support for eMMC and SD card ... Add support for the eMMC and SD card connected on the common processor board sdhci0 is connected to an eMMC while sdhci1 is connected to the micro SD slot. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Tested-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Sekhar Nori <nsekhar@ti.com> Link: https://lore.kernel.org/r/20200924112644.11076-3-faiz_abbas@ti.com	2020-09-24 07:11:38 -05:00
Faiz Abbas	7cd03dc78b	arm64: dts: ti: k3-j7200-main: Add support for MMC/SD controller nodes ... Add support for MMC/SD controller nodes present on TI's j7200 SoCs. There are two nodes: 1. sdhci0 (8 bit bus width, 200 MHz, HS200, 200 MBps) 2. sdhci1 (4 bit bus width, 50 MHz, HS, 25 MBps) Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Tested-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Sekhar Nori <nsekhar@ti.com> Link: https://lore.kernel.org/r/20200924112644.11076-2-faiz_abbas@ti.com	2020-09-24 07:11:38 -05:00
Vignesh Raghavendra	0bf331496a	arm64: dts: ti: k3-j7200-som-p0: Add HyperFlash node ... J7200 SoM has a HyperFlash connected to HyperBus memory controller. But HyperBus is muxed with OSPI, therefore keep HyperBus node disabled. Bootloader will detect the mux and enable the node as required. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Sekhar Nori <nsekhar@ti.com> Link: https://lore.kernel.org/r/20200923163150.16973-3-vigneshr@ti.com	2020-09-24 06:11:53 -05:00
Vignesh Raghavendra	1b77265626	arm64: dts: ti: k3-j7200-mcu-wakeup: Add HyperBus node ... J7200 has a Flash SubSystem that has one OSPI and one HyperBus.. Add DT nodes for HyperBus controller for now. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Sekhar Nori <nsekhar@ti.com> Link: https://lore.kernel.org/r/20200923163150.16973-2-vigneshr@ti.com	2020-09-24 06:11:53 -05:00
Vignesh Raghavendra	e25889f8f5	arm64: dts: ti: k3-j7200-common-proc-board: Add I2C IO expanders ... Add DT nodes for I2C GPIO expanders on main_i2c0 and main_i2c1 and also add the pinmux corresponding to these I2C instances. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Sekhar Nori <nsekhar@ti.com> Reviewed-by: Faiz Abbas <faiz_abbas@ti.com> Link: https://lore.kernel.org/r/20200923155400.13757-3-vigneshr@ti.com	2020-09-24 06:11:53 -05:00
Vignesh Raghavendra	03bfeb5287	arm64: dts: ti: k3-j7200: Add I2C nodes ... J7200 has 7 I2Cs in main domain, 2 I2Cs in MCU and 1 in wakeup domain. Add DT nodes for the same. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Sekhar Nori <nsekhar@ti.com> Reviewed-by: Faiz Abbas <faiz_abbas@ti.com> Link: https://lore.kernel.org/r/20200923155400.13757-2-vigneshr@ti.com	2020-09-24 06:11:47 -05:00
Grygorii Strashko	fc3b15506d	arm64: dts: ti: k3-j7200-common-proc-board: add mcu cpsw nuss pinmux and phy defs ... The TI J7200 EVM base board has TI DP83867 PHY connected to external CPSW NUSS Port 1 in rgmii-rxid mode. Hence, add pinmux and Ethernet PHY configuration for TI J7200 SoC MCU Gigabit Ethernet two ports Switch subsystem (CPSW NUSS). Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Suman Anna <s-anna@ti.com> Link: https://lore.kernel.org/r/20200923220938.30788-5-grygorii.strashko@ti.com	2020-09-24 05:55:11 -05:00