Commit Graph

553 Commits

Author SHA1 Message Date
shli@kernel.org
46d5b78562 raid5: use flex_array for scribble data
Use flex_array for scribble data. Next patch will batch several stripes
together, so scribble data should be able to cover several stripes, so this
patch also allocates scribble data for stripes across a chunk.

Signed-off-by: Shaohua Li <shli@fusionio.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2015-04-22 08:00:41 +10:00
NeilBrown
09314799e4 md: remove 'go_faster' option from ->sync_request()
This option is not well justified and testing suggests that
it hardly ever makes any difference.

The comment suggests there might be a need to wait for non-resync
activity indicated by ->nr_waiting, however raise_barrier()
already waits for all of that.

So just remove it to simplify reasoning about speed limiting.

This allows us to remove a 'FIXME' comment from raid5.c as that
never used the flag.

Signed-off-by: NeilBrown <neilb@suse.de>
2015-04-22 08:00:40 +10:00
Eric Mei
16d9cfab93 raid5: check faulty flag for array status during recovery.
When we have more than 1 drive failure, it's possible we start
rebuild one drive while leaving another faulty drive in array.
To determine whether array will be optimal after building, current
code only check whether a drive is missing, which could potentially
lead to data corruption. This patch is to add checking Faulty flag.

Signed-off-by: NeilBrown <neilb@suse.de>
2015-02-25 11:38:26 +11:00
NeilBrown
26ac107378 md/raid5: Fix livelock when array is both resyncing and degraded.
Commit a7854487cd:
  md: When RAID5 is dirty, force reconstruct-write instead of read-modify-write.

Causes an RCW cycle to be forced even when the array is degraded.
A degraded array cannot support RCW as that requires reading all data
blocks, and one may be missing.

Forcing an RCW when it is not possible causes a live-lock and the code
spins, repeatedly deciding to do something that cannot succeed.

So change the condition to only force RCW on non-degraded arrays.

Reported-by: Manibalan P <pmanibalan@amiindia.co.in>
Bisected-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Tested-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Fixes: a7854487cd
Cc: stable@vger.kernel.org (v3.7+)
2015-02-18 11:35:14 +11:00
NeilBrown
6791875e2e md: make reconfig_mutex optional for writes to md sysfs files.
Rather than using mddev_lock() to take the reconfig_mutex
when writing to any md sysfs file, we only take mddev_lock()
in the particular _store() functions that require it.
Admittedly this is most, but it isn't all.

This also allows us to remove special-case handling for new_dev_store
(in md_attr_store).

Signed-off-by: NeilBrown <neilb@suse.de>
2015-02-06 09:32:56 +11:00
NeilBrown
7b1485bab9 md/raid5: use ->lock to protect accessing raid5 sysfs attributes.
It is important that mddev->private isn't freed while
a sysfs attribute function is accessing it.

So use mddev->lock to protect the setting of ->private to NULL, and
take that lock when checking ->private for NULL and de-referencing it
in the sysfs access functions.

This only applies to the read ('show') side of access.  Write
access will be handled separately.

Signed-off-by: NeilBrown <neilb@suse.de>
2015-02-06 09:32:55 +11:00
NeilBrown
afa0f557cb md: rename ->stop to ->free
Now that the ->stop function only frees the private data,
rename is accordingly.

Also pass in the private pointer as an arg rather than using
mddev->private.  This flexibility will be useful in level_store().

Finally, don't clear ->private.  It doesn't make sense to clear
it seeing that isn't what we free, and it is no longer necessary
to clear ->private (it was some time ago before  ->to_remove was
introduced).

Setting ->to_remove in ->free() is a bit of a wart, but not a
big problem at the moment.

Signed-off-by: NeilBrown <neilb@suse.de>
2015-02-04 08:35:52 +11:00
NeilBrown
5aa61f427e md: split detach operation out from ->stop.
Each md personality has a 'stop' operation which does two
things:
 1/ it finalizes some aspects of the array to ensure nothing
    is accessing the ->private data
 2/ it frees the ->private data.

All the steps in '1' can apply to all arrays and so can be
performed in common code.

This is useful as in the case where we change the personality which
manages an array (in level_store()), it would be helpful to do
step 1 early, and step 2 later.

So split the 'step 1' functionality out into a new mddev_detach().

Signed-off-by: NeilBrown <neilb@suse.de>
2015-02-04 08:35:52 +11:00
NeilBrown
64590f45dd md: make merge_bvec_fn more robust in face of personality changes.
There is no locking around calls to merge_bvec_fn(), so
it is possible that calls which coincide with a level (or personality)
change could go wrong.

So create a central dispatch point for these functions and use
rcu_read_lock().
If the array is suspended, reject any merge that can be rejected.
If not, we know it is safe to call the function.

Signed-off-by: NeilBrown <neilb@suse.de>
2015-02-04 08:35:52 +11:00
NeilBrown
5c675f83c6 md: make ->congested robust against personality changes.
There is currently no locking around calls to the 'congested'
bdi function.  If called at an awkward time while an array is
being converted from one level (or personality) to another, there
is a tiny chance of running code in an unreferenced module etc.

So add a 'congested' function to the md_personality operations
structure, and call it with appropriate locking from a central
'mddev_congested'.

When the array personality is changing the array will be 'suspended'
so no IO is processed.
If mddev_congested detects this, it simply reports that the
array is congested, which is a safe guess.
As mddev_suspend calls synchronize_rcu(), mddev_congested can
avoid races by included the whole call inside an rcu_read_lock()
region.
This require that the congested functions for all subordinate devices
can be run under rcu_lock.  Fortunately this is the case.

Signed-off-by: NeilBrown <neilb@suse.de>
2015-02-04 08:35:52 +11:00
NeilBrown
ea664c8245 md/raid5: need_this_block: tidy/fix last condition.
That last condition is unclear and over cautious.

There are two related issues here.

If a partial write is destined for a missing device, then
either RMW or RCW can work.  We must read all the available
block.  Only then can the missing blocks be calculated, and
then the parity update performed.

If RMW is not an option, then there is a complication even
without partial writes.  If we would need to read a missing
device to perform the reconstruction, then we must first read every
block so the missing device data can be computed.
This is the case for RAID6 (Which currently does not support
RMW) and for times when we don't trust the parity (after a crash)
and so are in the process of resyncing it.

So make these two cases more clear and separate, and perform
the relevant tests more  thoroughly.

Signed-off-by: NeilBrown <neilb@suse.de>
2015-02-04 08:35:51 +11:00
NeilBrown
a9d56950f7 md/raid5: need_this_block: start simplifying the last two conditions.
Both the last two cases are only relevant if something has failed and
something needs to be written (but not over-written), and if it is OK
to pre-read blocks at this point.  So factor out those tests and
explain them.

Signed-off-by: NeilBrown <neilb@suse.de>
2015-02-04 08:35:51 +11:00
NeilBrown
a79cfe12c6 md/raid5: separate out the easy conditions in need_this_block.
Some of the conditions in need_this_block have very straight
forward motivation.  Separate those out and document them.

Signed-off-by: NeilBrown <neilb@suse.de>
2015-02-04 08:35:51 +11:00
NeilBrown
2c58f06e6f md/raid5: separate large if clause out of fetch_block().
fetch_block() has a very large and hard to read 'if' condition.

Separate it into its own function so that it can be
made more readable.

Signed-off-by: NeilBrown <neilb@suse.de>
2015-02-04 08:35:51 +11:00
Jes Sorensen
ad3ab8b608 md: do_release_stripe(): No need to call md_wakeup_thread() twice
67f455486d introduced a call to
md_wakeup_thread() when adding to the delayed_list. However the md
thread is woken up unconditionally just below.

Remove the unnecessary wakeup call.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2015-02-04 08:35:51 +11:00
NeilBrown
b1b02fe97f md/raid5: fix another livelock caused by non-aligned writes.
If a non-page-aligned write is destined for a device which
is missing/faulty, we can deadlock.

As the target device is missing, a read-modify-write cycle
is not possible.
As the write is not for a full-page, a recontruct-write cycle
is not possible.

This should be handled by logic in fetch_block() which notices
there is a non-R5_OVERWRITE write to a missing device, and so
loads all blocks.

However since commit 67f455486d, that code requires
STRIPE_PREREAD_ACTIVE before it will active, and those circumstances
never set STRIPE_PREREAD_ACTIVE.

So: in handle_stripe_dirtying, if neither rmw or rcw was possible,
set STRIPE_DELAYED, which will cause STRIPE_PREREAD_ACTIVE be set
after a suitable delay.

Fixes: 67f455486d
Cc: stable@vger.kernel.org (v3.16+)
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Tested-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2015-02-02 16:57:17 +11:00
NeilBrown
108cef3aa4 md/raid5: fetch_block must fetch all the blocks handle_stripe_dirtying wants.
It is critical that fetch_block() and handle_stripe_dirtying()
are consistent in their analysis of what needs to be loaded.
Otherwise raid5 can wait forever for a block that won't be loaded.

Currently when writing to a RAID5 that is resyncing, to a location
beyond the resync offset, handle_stripe_dirtying chooses a
reconstruct-write cycle, but fetch_block() assumes a
read-modify-write, and a lockup can happen.

So treat that case just like RAID6, just as we do in
handle_stripe_dirtying.  RAID6 always does reconstruct-write.

This bug was introduced when the behaviour of handle_stripe_dirtying
was changed in 3.7, so the patch is suitable for any kernel since,
though it will need careful merging for some versions.

Cc: stable@vger.kernel.org (v3.7+)
Fixes: a7854487cd
Reported-by: Henry Cai <henryplusplus@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2014-12-03 16:07:58 +11:00
NeilBrown
f72ffdd686 md: remove unwanted white space from md.c
My editor shows much of this is RED.

Signed-off-by: NeilBrown <neilb@suse.de>
2014-10-14 13:08:29 +11:00
Markus Stockhausen
b8e6a15a1a md/raid5: fix init_stripe() inconsistencies
raid5: fix init_stripe() inconsistencies

1) remove_hash() is not necessary. We will only be called right after
   get_free_stripe(). There we have already a call to remove_hash().

2) Tracing prints out the sector of the freed stripe and not the sector
   that we want to initialize.

Signed-off-by: NeilBrown <neilb@suse.de>
2014-10-14 13:08:28 +11:00
NeilBrown
3fd83717e4 md: use set_bit/clear_bit instead of shift/mask for bi_flags changes.
Using {set,clear}_bit is more consistent than shifting and masking.

No functional change.

Signed-off-by: NeilBrown <neilb@suse.de>
2014-10-09 10:07:04 +11:00
NeilBrown
8e0e99ba64 md/raid5: disable 'DISCARD' by default due to safety concerns.
It has come to my attention (thanks Martin) that 'discard_zeroes_data'
is only a hint.  Some devices in some cases don't do what it
says on the label.

The use of DISCARD in RAID5 depends on reads from discarded regions
being predictably zero.  If a write to a previously discarded region
performs a read-modify-write cycle it assumes that the parity block
was consistent with the data blocks.  If all were zero, this would
be the case.  If some are and some aren't this would not be the case.
This could lead to data corruption after a device failure when
data needs to be reconstructed from the parity.

As we cannot trust 'discard_zeroes_data', ignore it by default
and so disallow DISCARD on all raid4/5/6 arrays.

As many devices are trustworthy, and as there are benefits to using
DISCARD, add a module parameter to over-ride this caution and cause
DISCARD to work if discard_zeroes_data is set.

If a site want to enable DISCARD on some arrays but not on others they
should select DISCARD support at the filesystem level, and set the
raid456 module parameter.
    raid456.devices_handle_discard_safely=Y

As this is a data-safety issue, I believe this patch is suitable for
-stable.
DISCARD support for RAID456 was added in 3.7

Cc: Shaohua Li <shli@kernel.org>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Heinz Mauelshagen <heinzm@redhat.com>
Cc: stable@vger.kernel.org (3.7+)
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Fixes: 620125f2bf
Signed-off-by: NeilBrown <neilb@suse.de>
2014-10-02 13:45:00 +10:00
NeilBrown
9c4bdf697c md/raid6: avoid data corruption during recovery of double-degraded RAID6
During recovery of a double-degraded RAID6 it is possible for
some blocks not to be recovered properly, leading to corruption.

If a write happens to one block in a stripe that would be written to a
missing device, and at the same time that stripe is recovering data
to the other missing device, then that recovered data may not be written.

This patch skips, in the double-degraded case, an optimisation that is
only safe for single-degraded arrays.

Bug was introduced in 2.6.32 and fix is suitable for any kernel since
then.  In an older kernel with separate handle_stripe5() and
handle_stripe6() functions the patch must change handle_stripe6().

Cc: stable@vger.kernel.org (2.6.32+)
Fixes: 6c0069c0ae
Cc: Yuri Tikhonov <yur@emcraft.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Reported-by: "Manibalan P" <pmanibalan@amiindia.co.in>
Tested-by: "Manibalan P" <pmanibalan@amiindia.co.in>
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1090423
Signed-off-by: NeilBrown <neilb@suse.de>
Acked-by: Dan Williams <dan.j.williams@intel.com>
2014-08-18 14:49:46 +10:00
NeilBrown
a40687ff73 md/raid5: avoid livelock caused by non-aligned writes.
If a stripe in a raid6 array received a write to each data block while
the array is degraded, and if any of these writes to a missing device
are not page-aligned, then a live-lock happens.

In this case the P and Q blocks need to be read so that the part of
the missing block which is *not* being updated by the write can be
constructed.  Due to a logic error, these blocks are not loaded, so
the update cannot proceed and the stripe is 'handled' repeatedly in an
infinite loop.

This bug is unlikely as most writes are page aligned.  However as it
can lead to a livelock it is suitable for -stable.  It was introduced
in 3.16.

Cc: stable@vger.kernel.org (v3.16)
Fixed: 67f455486d
Signed-off-by: NeilBrown <neilb@suse.de>
2014-08-18 14:49:41 +10:00
Linus Torvalds
8d0304e69d Assorted md fixes for 3.16
Mostly performance improvements with a few corner-case bug fixes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIVAwUAU5fevznsnt1WYoG5AQKzNxAAgjZPg6LZgl0wEHJi09ykqLK9dSkglz2B
 RY5IEWPEMcsGJQbSX7fEME5WSHkqKBIHx43xmdzijPCHyWLnF4vQRubNAi/Wo8PC
 yfJyI5hMrG8+0rNKnmXWeG+NLGj7l7j+wkExe27VBlu2+6ATvIUCa34kjOWFDJJx
 xAN9/t22XGly776SiuLXTpMhA0pRWH4sqijJhvM5EqPlsEUjGxvQU/URwUPYzhYr
 iCbvY64uKB1Crh+vn7yP1IUWc77aDOoUPIxO50m0GXOQFU/wbQta1NAFmMeu8tIo
 3QRlGzP+jRJFBV7jLii4nHTMSVxBmD2zMppxVtDoq/egWhyZlJhh2Kd5sUKo2r9V
 8bGQm7e1JlsDsRMVXxSlx3TebZDfJhtnFNhYb6JPlpWM5EYjCzXXfJUl3/6LfKX6
 BKJ800xvabr5TFkVubF9H80LTQxaO+pQoS6PSs8hnwneqtybdbt9o7V59yluMGao
 IwaG/BY4jlY+76YnK32Kbr1eofUNYXBLg45mgSkrhUVqv9HLHe0CDnYAzYs68aur
 zG8a1rhA9IJtBmWwql2Gm8lKOnDFM6onvSmaYntsabJ++eahaNDpL5ck+R4kO8mJ
 pyI1N6GQDjtLdONk4NmH36P+CuCZje6KwRbVXvsJIBA1042tkZfU0zdqgt5QhFZj
 Ma9ZCn9wZFo=
 =MaM/
 -----END PGP SIGNATURE-----

Merge tag 'md/3.16' of git://neil.brown.name/md

Pull md updates from Neil Brown:
 "Assorted md fixes for 3.16

  Mostly performance improvements with a few corner-case bug fixes"

* tag 'md/3.16' of git://neil.brown.name/md:
  raid5: speedup sync_request processing
  md/raid5: deadlock between retry_aligned_read with barrier io
  raid5: add an option to avoid copy data from bio to stripe cache
  md/bitmap: remove confusing code from filemap_get_page.
  raid5: avoid release list until last reference of the stripe
  md: md_clear_badblocks should return an error code on failure.
  md/raid56: Don't perform reads to support writes until stripe is ready.
  md: refuse to change shape of array if it is active but read-only
2014-06-11 08:33:41 -07:00
Eivind Sarto
053f5b6525 raid5: speedup sync_request processing
The raid5 sync_request() processing calls handle_stripe() within the context of
the resync-thread.  The resync-thread issues the first set of read requests
and this adds execution latency and slows down the scheduling of the next
sync_request().
The current rebuild/resync speed of raid5 is not much faster than what
rotational HDDs can sustain.
Testing the following patch on a 6-drive array, I can increase the rebuild
speed from 100 MB/s to 175 MB/s.
The sync_request() now just sets STRIPE_HANDLE and releases the stripe.  This
creates some more parallelism between the resync-thread and raid5 kernel daemon.

Signed-off-by: Eivind Sarto <esarto@fusionio.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2014-06-10 11:02:01 +10:00
hui jiao
2844dc32ea md/raid5: deadlock between retry_aligned_read with barrier io
A chunk aligned read increases counter active_aligned_reads and
decreases it after sub-device handle it successfully. But when a read
error occurs,  the read redispatched by raid5d, and the
active_aligned_reads will not be decreased until we can grab a stripe
head in retry_aligned_read. Now suppose, a barrier io comes, set
conf->quiesce to 2, and wait until both active_stripes and
active_aligned_reads are zero. The retried chunk aligned read gets
stuck at get_active_stripe waiting until conf->quiesce becomes 0.
Retry_aligned_read and barrier io are waiting each other now.
One possible solution is that we ignore conf->quiesce, let the retried
aligned read finish. I reproduced this deadlock and test this patch on
centos6.0

Signed-off-by: NeilBrown <neilb@suse.de>
2014-06-05 17:18:19 +10:00
Shaohua Li
d592a99691 raid5: add an option to avoid copy data from bio to stripe cache
The stripe cache has two goals:
1. cache data, so next time if data can be found in stripe cache, disk access
can be avoided.
2. stable data. data is copied from bio to stripe cache and calculated parity.
data written to disk is from stripe cache, so if upper layer changes bio data,
data written to disk isn't impacted.

In my environment, I can guarantee 2 will not happen. And BDI_CAP_STABLE_WRITES
can guarantee 2 too. For 1, it's not common too. block plug mechanism will
dispatch a bunch of sequentail small requests together. And since I'm using
SSD, I'm using small chunk size. It's rare case stripe cache is really useful.

So I'd like to avoid the copy from bio to stripe cache and it's very helpful
for performance. In my 1M randwrite tests, avoid the copy can increase the
performance more than 30%.

Of course, this shouldn't be enabled by default. It's reported enabling
BDI_CAP_STABLE_WRITES can harm some workloads before, so I added an option to
control it.

Neilb:
  changed BUG_ON to WARN_ON
  Removed some assignments from raid5_build_block which are now not needed.

Signed-off-by: Shaohua Li <shli@fusionio.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2014-05-29 16:59:47 +10:00
Eivind Sarto
cf170f3fa4 raid5: avoid release list until last reference of the stripe
The (lockless) release_list reduces lock contention, but there is excessive
queueing and dequeuing of stripes on this list.  A stripe will currently be
queued on the release_list with a stripe reference count > 1.  This can cause
the raid5 kernel thread(s) to dequeue the stripe and decrement the refcount
without doing any other useful processing of the stripe.  The are two cases
when the stripe can be put on the release_list multiple times before it is
actually handled by the kernel thread(s).
1) make_request() activates the stripe processing in 4k increments.  When a
   write request is large enough to span multiple chunks of a stripe_head, the
   first 4k chunk adds the stripe to the plug list.  The next 4k chunk that is
   processed for the same stripe puts the stripe on the release_list with a
   refcount=2.  This can cause the kernel thread to process and decrement the
   stripe before the stripe us unplugged, which again will put it back on the
   release_list.
2) Whenever IO is scheduled on a stripe (pre-read and/or write), the stripe
   refcount is set to the number of active IO (for each chunk).  The stripe is
   released as each IO complete, and can be queued and dequeued multiple times
   on the release_list, until its refcount finally reached zero.

This simple patch will ensure a stripe is only queued on the release_list when
its refcount=1 and is ready to be handled by the kernel thread(s).  I added some
instrumentation to raid5 and counted the number of times striped were queued on
the release_list for a variety of write IO sizes.  Without this patch the number
of times stripes got queued on the release_list was 100-500% higher than with
the patch.  The excess queuing will increase with the IO size.  The patch also
improved throughput by 5-10%.

Signed-off-by: Eivind Sarto <esarto@fusionio.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2014-05-29 16:59:46 +10:00
NeilBrown
67f455486d md/raid56: Don't perform reads to support writes until stripe is ready.
If it is found that we need to pre-read some blocks before a write
can succeed, we normally set STRIPE_DELAYED and don't actually perform
the read until STRIPE_PREREAD_ACTIVE subsequently gets set.

However for a degraded RAID6 we currently perform the reads as soon
as we see that a write is pending.  This significantly hurts
throughput.

So:
 - when handle_stripe_dirtying find a block that it wants on a device
   that is failed, set STRIPE_DELAY, instead of doing nothing, and
 - when fetch_block detects that a read might be required to satisfy a
   write, only perform the read if STRIPE_PREREAD_ACTIVE is set,
   and if we would actually need to read something to complete the write.

This also helps RAID5, though less often as RAID5 supports a
read-modify-write cycle.  For RAID5 the read is performed too early
only if the write is not a full 4K aligned write (i.e. no an
R5_OVERWRITE).

Also clean up a couple of horrible bits of formatting.

Reported-by: Patrik Horník <patrik@dsl.sk>
Signed-off-by: NeilBrown <neilb@suse.de>
2014-05-29 16:59:46 +10:00
Peter Zijlstra
4e857c58ef arch: Mass conversion of smp_mb__*()
Mostly scripted conversion of the smp_mb__* barriers.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/n/tip-55dhyhocezdw1dg7u19hmh1u@git.kernel.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-arch@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-18 14:20:48 +02:00
Shaohua Li
c7a6d35e46 raid5: fix a race of stripe count check
I hit another BUG_ON with e240c1839d. In __get_priority_stripe(),
stripe count equals to 0 initially. Between atomic_inc and BUG_ON,
get_active_stripe() finds the stripe. So the stripe count isn't 1 any more.

V2: keeps the BUG_ON suggested by Neil.

Signed-off-by: Shaohua Li <shli@fusionio.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2014-04-17 17:05:28 +10:00
Shaohua Li
e240c1839d raid5: get_active_stripe avoids device_lock
For sequential workload (or request size big workload), get_active_stripe can
find cached stripe. In this case, we always hold device_lock, which exposes a
lot of lock contention for such workload. If stripe count isn't 0, we don't
need hold the lock actually, since we just increase its count. And this is the
hot code path for such workload. Unfortunately we must delete the BUG_ON.

Signed-off-by: Shaohua Li <shli@fusionio.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2014-04-09 14:42:42 +10:00
Shaohua Li
27c0f68f07 raid5: make_request does less prepare wait
In NUMA machine, prepare_to_wait/finish_wait in make_request exposes a
lot of contention for sequential workload (or big request size
workload). For such workload, each bio includes several stripes. So we
can just do prepare_to_wait/finish_wait once for the whold bio instead
of every stripe.  This reduces the lock contention completely for such
workload. Random workload might have the similar lock contention too,
but I didn't see it yet, maybe because my stroage is still not fast
enough.

Signed-off-by: Shaohua Li <shli@fusionio.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2014-04-09 14:42:38 +10:00
Oleg Nesterov
789b5e0315 md/raid5: Fix CPU hotplug callback registration
Subsystems that want to register CPU hotplug callbacks, as well as perform
initialization for the CPUs that are already online, often do it as shown
below:

	get_online_cpus();

	for_each_online_cpu(cpu)
		init_cpu(cpu);

	register_cpu_notifier(&foobar_cpu_notifier);

	put_online_cpus();

This is wrong, since it is prone to ABBA deadlocks involving the
cpu_add_remove_lock and the cpu_hotplug.lock (when running concurrently
with CPU hotplug operations).

Interestingly, the raid5 code can actually prevent double initialization and
hence can use the following simplified form of callback registration:

	register_cpu_notifier(&foobar_cpu_notifier);

	get_online_cpus();

	for_each_online_cpu(cpu)
		init_cpu(cpu);

	put_online_cpus();

A hotplug operation that occurs between registering the notifier and calling
get_online_cpus(), won't disrupt anything, because the code takes care to
perform the memory allocations only once.

So reorganize the code in raid5 this way to fix the deadlock with callback
registration.

Cc: linux-raid@vger.kernel.org
Cc: stable@vger.kernel.org (v2.6.32+)
Fixes: 36d1c6476b
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
[Srivatsa: Fixed the unregister_cpu_notifier() deadlock, added the
free_scratch_buffer() helper to condense code further and wrote the changelog.]
Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2014-02-13 13:46:45 +11:00
Linus Torvalds
53d8ab29f8 Merge branch 'for-3.14/drivers' of git://git.kernel.dk/linux-block
Pull block IO driver changes from Jens Axboe:

 - bcache update from Kent Overstreet.

 - two bcache fixes from Nicholas Swenson.

 - cciss pci init error fix from Andrew.

 - underflow fix in the parallel IDE pg_write code from Dan Carpenter.
   I'm sure the 1 (or 0) users of that are now happy.

 - two PCI related fixes for sx8 from Jingoo Han.

 - floppy init fix for first block read from Jiri Kosina.

 - pktcdvd error return miss fix from Julia Lawall.

 - removal of IRQF_SHARED from the SEGA Dreamcast CD-ROM code from
   Michael Opdenacker.

 - comment typo fix for the loop driver from Olaf Hering.

 - potential oops fix for null_blk from Raghavendra K T.

 - two fixes from Sam Bradshaw (Micron) for the mtip32xx driver, fixing
   an OOM problem and a problem with handling security locked conditions

* 'for-3.14/drivers' of git://git.kernel.dk/linux-block: (47 commits)
  mg_disk: Spelling s/finised/finished/
  null_blk: Null pointer deference problem in alloc_page_buffers
  mtip32xx: Correctly handle security locked condition
  mtip32xx: Make SGL container per-command to eliminate high order dma allocation
  drivers/block/loop.c: fix comment typo in loop_config_discard
  drivers/block/cciss.c:cciss_init_one(): use proper errnos
  drivers/block/paride/pg.c: underflow bug in pg_write()
  drivers/block/sx8.c: remove unnecessary pci_set_drvdata()
  drivers/block/sx8.c: use module_pci_driver()
  floppy: bail out in open() if drive is not responding to block0 read
  bcache: Fix auxiliary search trees for key size > cacheline size
  bcache: Don't return -EINTR when insert finished
  bcache: Improve bucket_prio() calculation
  bcache: Add bch_bkey_equal_header()
  bcache: update bch_bkey_try_merge
  bcache: Move insert_fixup() to btree_keys_ops
  bcache: Convert sorting to btree_keys
  bcache: Convert debug code to btree_keys
  bcache: Convert btree_iter to struct btree_keys
  bcache: Refactor bset_tree sysfs stats
  ...
2014-01-30 11:40:10 -08:00
Linus Torvalds
f568849eda Merge branch 'for-3.14/core' of git://git.kernel.dk/linux-block
Pull core block IO changes from Jens Axboe:
 "The major piece in here is the immutable bio_ve series from Kent, the
  rest is fairly minor.  It was supposed to go in last round, but
  various issues pushed it to this release instead.  The pull request
  contains:

   - Various smaller blk-mq fixes from different folks.  Nothing major
     here, just minor fixes and cleanups.

   - Fix for a memory leak in the error path in the block ioctl code
     from Christian Engelmayer.

   - Header export fix from CaiZhiyong.

   - Finally the immutable biovec changes from Kent Overstreet.  This
     enables some nice future work on making arbitrarily sized bios
     possible, and splitting more efficient.  Related fixes to immutable
     bio_vecs:

        - dm-cache immutable fixup from Mike Snitzer.
        - btrfs immutable fixup from Muthu Kumar.

  - bio-integrity fix from Nic Bellinger, which is also going to stable"

* 'for-3.14/core' of git://git.kernel.dk/linux-block: (44 commits)
  xtensa: fixup simdisk driver to work with immutable bio_vecs
  block/blk-mq-cpu.c: use hotcpu_notifier()
  blk-mq: for_each_* macro correctness
  block: Fix memory leak in rw_copy_check_uvector() handling
  bio-integrity: Fix bio_integrity_verify segment start bug
  block: remove unrelated header files and export symbol
  blk-mq: uses page->list incorrectly
  blk-mq: use __smp_call_function_single directly
  btrfs: fix missing increment of bi_remaining
  Revert "block: Warn and free bio if bi_end_io is not set"
  block: Warn and free bio if bi_end_io is not set
  blk-mq: fix initializing request's start time
  block: blk-mq: don't export blk_mq_free_queue()
  block: blk-mq: make blk_sync_queue support mq
  block: blk-mq: support draining mq queue
  dm cache: increment bi_remaining when bi_end_io is restored
  block: fixup for generic bio chaining
  block: Really silence spurious compiler warnings
  block: Silence spurious compiler warnings
  block: Kill bio_pair_split()
  ...
2014-01-30 11:19:05 -08:00
NeilBrown
7da9d450ab md/raid5: close recently introduced race in stripe_head management.
As release_stripe and __release_stripe decrement ->count and then
manipulate ->lru both under ->device_lock, it is important that
get_active_stripe() increments ->count and clears ->lru also under
->device_lock.

However we currently list_del_init ->lru under the lock, but increment
the ->count outside the lock.  This can lead to races and list
corruption.

So move the atomic_inc(&sh->count) up inside the ->device_lock
protected region.

Note that we still increment ->count without device lock in the case
where get_free_stripe() was called, and in fact don't take
->device_lock at all in that path.
This is safe because if the stripe_head can be found by
get_free_stripe, then the hash lock assures us the no-one else could
possibly be calling release_stripe() at the same time.

Fixes: 566c09c534
Cc: stable@vger.kernel.org (3.13)
Reported-and-tested-by: Ian Kumlien <ian.kumlien@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2014-01-22 11:45:03 +11:00
NeilBrown
9f97e4b128 md/raid5: fix long-standing problem with bitmap handling on write failure.
Before a write starts we set a bit in the write-intent bitmap.
When the write completes we clear that bit if the write was successful
to all devices.  However if the write wasn't fully successful we
should not clear the bit.  If the faulty drive is subsequently
re-added, the fact that the bit is still set ensure that we will
re-write the data that is missing.

This logic is mediated by the STRIPE_DEGRADED flag - we only clear the
bitmap bit when this flag is not set.
Currently we correctly set the flag if a write starts when some
devices are failed or missing.  But we do *not* set the flag if some
device failed during the write attempt.
This is wrong and can result in clearing the bit inappropriately.

So: set the flag when a write fails.

This bug has been present since bitmaps were introduces, so the fix is
suitable for any -stable kernel.

Reported-by: Ethan Wilson <ethan.wilson@shiftmail.org>
Cc: stable@vger.kernel.org
Signed-off-by: NeilBrown <neilb@suse.de>
2014-01-16 09:35:38 +11:00
NeilBrown
5af9bef72c md/raid5: fix a recently broken BUG_ON().
commit 6d183de407
    md/raid5: fix newly-broken locking in get_active_stripe.

simplified a BUG_ON, but removed too much so now it sometimes fires
when it shouldn't.

When the STRIPE_EXPANDING flag is set, the stripe_head might be on a
special list while multiple stripe_heads are collected, or it might
not be on any list, even a 'free' list when the refcount is zero.  As
long as STRIPE_EXPANDING is set, it will be found and added back to a
list eventually.

So both of the BUG_ONs which test for the ->lru being empty or not
need to avoid the case where STRIPE_EXPANDING is set.

The patch which broke this was marked for -stable, so this patch needs
to be applied to any branch that received 6d183de4

Fixes: 6d183de407
Cc: stable@vger.kernel.org (any release to which above was applied)
Signed-off-by: NeilBrown <neilb@suse.de>
2014-01-14 16:44:07 +11:00
NeilBrown
1cc03eb932 md/raid5: Fix possible confusion when multiple write errors occur.
commit 5d8c71f9e5
    md: raid5 crash during degradation

Fixed a crash in an overly simplistic way which could leave
R5_WriteError or R5_MadeGood set in the stripe cache for devices
for which it is no longer relevant.
When those devices are removed and spares added the flags are still
set and can cause incorrect behaviour.

commit 14a75d3e07
    md/raid5: preferentially read from replacement device if possible.

Fixed the same bug if a more effective way, so we can now revert
the original commit.

Reported-and-tested-by: Alexander Lyakas <alex.bolshoy@gmail.com>
Cc: stable@vger.kernel.org (3.2+ - 3.2 will need a different fix though)
Fixes: 5d8c71f9e5
Signed-off-by: NeilBrown <neilb@suse.de>
2014-01-14 16:44:07 +11:00
Kent Overstreet
c78afc6261 bcache/md: Use raid stripe size
Now that we've got code for raid5/6 stripe awareness, bcache just needs
to know about the stripes and when writing partial stripes is expensive
- we probably don't want to enable this optimization for raid1 or 10,
even though they have stripes. So add a flag to queue_limits.

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-01-08 13:05:09 -08:00
Jens Axboe
b28bc9b38c Linux 3.13-rc6
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJSwLfoAAoJEHm+PkMAQRiGi6QH/1U1B7lmHChDTw3jj1lfm9gA
 189Si4QJlnxFWCKHvKEL+pcaVuACU+aMGI8+KyMYK4/JfuWVjjj5fr/SvyHH2/8m
 LdSK8aHMhJ46uBS4WJ/l6v46qQa5e2vn8RKSBAyKm/h4vpt+hd6zJdoFrFai4th7
 k/TAwOAEHI5uzexUChwLlUBRTvbq4U8QUvDu+DeifC8cT63CGaaJ4qVzjOZrx1an
 eP6UXZrKDASZs7RU950i7xnFVDQu4PsjlZi25udsbeiKcZJgPqGgXz5ULf8ZH8RQ
 YCi1JOnTJRGGjyIOyLj7pyB01h7XiSM2+eMQ0S7g54F2s7gCJ58c2UwQX45vRWU=
 =/4/R
 -----END PGP SIGNATURE-----

Merge tag 'v3.13-rc6' into for-3.14/core

Needed to bring blk-mq uptodate, since changes have been going in
since for-3.14/core was established.

Fixup merge issues related to the immutable biovec changes.

Signed-off-by: Jens Axboe <axboe@kernel.dk>

Conflicts:
	block/blk-flush.c
	fs/btrfs/check-integrity.c
	fs/btrfs/extent_io.c
	fs/btrfs/scrub.c
	fs/logfs/dev_bdev.c
2013-12-31 09:51:02 -07:00
NeilBrown
6d183de407 md/raid5: fix newly-broken locking in get_active_stripe.
commit 566c09c534 raid5: relieve lock contention in get_active_stripe()

modified the locking in get_active_stripe() reducing the range
protected by the (highly contended) device_lock.
Unfortunately it reduced the range too much opening up some races.

One race can occur if get_priority_stripe runs between the
test on sh->count and device_lock being taken.
This will mean that sh->lru is not empty while get_active_stripe
thinks ->count is zero resulting in a 'BUG' firing.

Another race happens if __release_stripe is called immediately
after sh->count is tested and found to be non-zero.  If STRIPE_HANDLE
is not set, get_active_stripe should increment ->active_stripes
when it increments ->count from 0, but as it didn't think it was 0,
it doesn't.

Extending device_lock to cover the test on sh->count close these
races.

While we are here, fix the two BUG tests:
 -If count is zero, then lru really must not be empty, or we've
  lock the stripe_head somehow - no other tests are relevant.
 -STRIPE_ON_RELEASE_LIST is completely independent of ->lru so
  testing it is pointless.

Reported-and-tested-by: Brassow Jonathan <jbrassow@redhat.com>
Reviewed-by: Shaohua Li <shli@kernel.org>
Fixes: 566c09c534
Signed-off-by: NeilBrown <neilb@suse.de>
2013-11-28 11:00:15 +11:00
NeilBrown
0c775d5208 md/raid5: fix new memory-reference bug in alloc_thread_groups.
In alloc_thread_groups, worker_groups is a pointer to an array,
not an array of pointers.
So
   worker_groups[i]
is wrong.  It should be
   &(*worker_groups)[i]

Found-by: coverity
Fixes: 60aaf93385
Reported-by: Ben Hutchings <bhutchings@solarflare.com>
Cc: majianpeng <majianpeng@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2013-11-28 11:00:04 +11:00
Kent Overstreet
7988613b0e block: Convert bio_for_each_segment() to bvec_iter
More prep work for immutable biovecs - with immutable bvecs drivers
won't be able to use the biovec directly, they'll need to use helpers
that take into account bio->bi_iter.bi_bvec_done.

This updates callers for the new usage without changing the
implementation yet.

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "Ed L. Cashin" <ecashin@coraid.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Lars Ellenberg <drbd-dev@lists.linbit.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Paul Clements <Paul.Clements@steeleye.com>
Cc: Jim Paris <jim@jtan.com>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Yehuda Sadeh <yehuda@inktank.com>
Cc: Sage Weil <sage@inktank.com>
Cc: Alex Elder <elder@inktank.com>
Cc: ceph-devel@vger.kernel.org
Cc: Joshua Morris <josh.h.morris@us.ibm.com>
Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Neil Brown <neilb@suse.de>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: linux390@de.ibm.com
Cc: Nagalakshmi Nandigama <Nagalakshmi.Nandigama@lsi.com>
Cc: Sreekanth Reddy <Sreekanth.Reddy@lsi.com>
Cc: support@lsi.com
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Guo Chao <yan@linux.vnet.ibm.com>
Cc: Asai Thambi S P <asamymuthupa@micron.com>
Cc: Selvan Mani <smani@micron.com>
Cc: Sam Bradshaw <sbradshaw@micron.com>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: Quoc-Son Anh <quoc-sonx.anh@intel.com>
Cc: Sebastian Ott <sebott@linux.vnet.ibm.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Seth Jennings <sjenning@linux.vnet.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: "Darrick J. Wong" <darrick.wong@oracle.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Jan Kara <jack@suse.cz>
Cc: linux-m68k@lists.linux-m68k.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: drbd-user@lists.linbit.com
Cc: nbd-general@lists.sourceforge.net
Cc: cbe-oss-dev@lists.ozlabs.org
Cc: xen-devel@lists.xensource.com
Cc: virtualization@lists.linux-foundation.org
Cc: linux-raid@vger.kernel.org
Cc: linux-s390@vger.kernel.org
Cc: DL-MPTFusionLinux@lsi.com
Cc: linux-scsi@vger.kernel.org
Cc: devel@driverdev.osuosl.org
Cc: linux-fsdevel@vger.kernel.org
Cc: cluster-devel@redhat.com
Cc: linux-mm@kvack.org
Acked-by: Geoff Levand <geoff@infradead.org>
2013-11-23 22:33:49 -08:00
Kent Overstreet
4f024f3797 block: Abstract out bvec iterator
Immutable biovecs are going to require an explicit iterator. To
implement immutable bvecs, a later patch is going to add a bi_bvec_done
member to this struct; for now, this patch effectively just renames
things.

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "Ed L. Cashin" <ecashin@coraid.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Lars Ellenberg <drbd-dev@lists.linbit.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Yehuda Sadeh <yehuda@inktank.com>
Cc: Sage Weil <sage@inktank.com>
Cc: Alex Elder <elder@inktank.com>
Cc: ceph-devel@vger.kernel.org
Cc: Joshua Morris <josh.h.morris@us.ibm.com>
Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Neil Brown <neilb@suse.de>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: dm-devel@redhat.com
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: linux390@de.ibm.com
Cc: Boaz Harrosh <bharrosh@panasas.com>
Cc: Benny Halevy <bhalevy@tonian.com>
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Chris Mason <chris.mason@fusionio.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Dave Kleikamp <shaggy@kernel.org>
Cc: Joern Engel <joern@logfs.org>
Cc: Prasad Joshi <prasadjoshi.linux@gmail.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Ben Myers <bpm@sgi.com>
Cc: xfs@oss.sgi.com
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Guo Chao <yan@linux.vnet.ibm.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Asai Thambi S P <asamymuthupa@micron.com>
Cc: Selvan Mani <smani@micron.com>
Cc: Sam Bradshaw <sbradshaw@micron.com>
Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Cc: "Roger Pau Monné" <roger.pau@citrix.com>
Cc: Jan Beulich <jbeulich@suse.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Campbell <Ian.Campbell@citrix.com>
Cc: Sebastian Ott <sebott@linux.vnet.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Jerome Marchand <jmarchand@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Peng Tao <tao.peng@emc.com>
Cc: Andy Adamson <andros@netapp.com>
Cc: fanchaoting <fanchaoting@cn.fujitsu.com>
Cc: Jie Liu <jeff.liu@oracle.com>
Cc: Sunil Mushran <sunil.mushran@gmail.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Namjae Jeon <namjae.jeon@samsung.com>
Cc: Pankaj Kumar <pankaj.km@samsung.com>
Cc: Dan Magenheimer <dan.magenheimer@oracle.com>
Cc: Mel Gorman <mgorman@suse.de>6
2013-11-23 22:33:47 -08:00
Linus Torvalds
6d6e352c80 md update for 3.13.
Mostly optimisations and obscure bug fixes.
  - raid5 gets less lock contention
  - raid1 gets less contention between normal-io and resync-io
    during resync.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIVAwUAUovzDznsnt1WYoG5AQJ1pQ//bDuXadoJ5dwjWjVxFOKoQ9j/9joEI0yH
 XTApD3ADKckdBc4TSLOIbCNLW1Pbe23HlOI/GjCiJ/7mePL3OwHd7Fx8Rfq3BubV
 f7NgjVwu8nwYD0OXEZsshImptEtrbYwQdy+qlKcHXcZz1MUfR+Egih3r/ouTEfEt
 FNq/6MpyN0IKSY82xP/jFZgesBucgKz/YOUIbwClxm7UiyISKvWQLBIAfLB3dyI3
 HoEdEzQX6I56Rw0mkSUG4Mk+8xx/8twxL+yqEUqfdJREWuB56Km8kl8y/e465Nk0
 ZZg6j/TrslVEwbEeVMx0syvYcaAWFZ4X2jdKfo1lI0g9beZp7H1GRF8yR1s2t/h4
 g/vb55MEN++4LPaE9ut4z7SG2yLyGkZgFTzTjyq5of+DFL0cayO7wXxbgpcD7JYf
 Doef/OSa6csKiGiJI48iQa08Bolmz9ZWzZQXhAthKfFQ9Rv+GEtIAi4kLR8EZPbu
 0/FL1ylYNUY9O7p0g+iy9Kcoc+xW36I95pPZf8pO8GFcXTjyuCCBVh/SNvFZZHPl
 3xk3aZJknAEID8VrVG2IJPkeDI8WK8YxmpU/nARCoytn07Df6Ye8jGvLdR8pL3lB
 TIZV6eRY4yciB8LtoK9Kg4XTmOMhBtjt4c3znkljp98vhOQQb/oHN+BXMGcwqvr9
 fk0KGrg31VA=
 =8RCg
 -----END PGP SIGNATURE-----

Merge tag 'md/3.13' of git://neil.brown.name/md

Pull md update from Neil Brown:
 "Mostly optimisations and obscure bug fixes.
   - raid5 gets less lock contention
   - raid1 gets less contention between normal-io and resync-io during
     resync"

* tag 'md/3.13' of git://neil.brown.name/md:
  md/raid5: Use conf->device_lock protect changing of multi-thread resources.
  md/raid5: Before freeing old multi-thread worker, it should flush them.
  md/raid5: For stripe with R5_ReadNoMerge, we replace REQ_FLUSH with REQ_NOMERGE.
  UAPI: include <asm/byteorder.h> in linux/raid/md_p.h
  raid1: Rewrite the implementation of iobarrier.
  raid1: Add some macros to make code clearly.
  raid1: Replace raise_barrier/lower_barrier with freeze_array/unfreeze_array when reconfiguring the array.
  raid1: Add a field array_frozen to indicate whether raid in freeze state.
  md: Convert use of typedef ctl_table to struct ctl_table
  md/raid5: avoid deadlock when raid5 array has unack badblocks during md_stop_writes.
  md: use MD_RECOVERY_INTR instead of kthread_should_stop in resync thread.
  md: fix some places where mddev_lock return value is not checked.
  raid5: Retry R5_ReadNoMerge flag when hit a read error.
  raid5: relieve lock contention in get_active_stripe()
  raid5: relieve lock contention in get_active_stripe()
  wait: add wait_event_cmd()
  md/raid5.c: add proper locking to error path of raid5_start_reshape.
  md: fix calculation of stacking limits on level change.
  raid5: Use slow_path to release stripe when mddev->thread is null
2013-11-20 13:05:25 -08:00
majianpeng
60aaf93385 md/raid5: Use conf->device_lock protect changing of multi-thread resources.
When we change group_thread_cnt from sysfs entry, it can OOPS.

The kernel messages are:
[  135.299021] BUG: unable to handle kernel NULL pointer dereference at           (null)
[  135.299073] IP: [<ffffffff815188ab>] handle_active_stripes+0x32b/0x440
[  135.299107] PGD 0
[  135.299122] Oops: 0000 [#1] SMP
[  135.299144] Modules linked in: netconsole e1000e ptp pps_core
[  135.299188] CPU: 3 PID: 2225 Comm: md0_raid5 Not tainted 3.12.0+ #24
[  135.299214] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS 080015  11/09/2011
[  135.299255] task: ffff8800b9638f80 ti: ffff8800b77a4000 task.ti: ffff8800b77a4000
[  135.299283] RIP: 0010:[<ffffffff815188ab>]  [<ffffffff815188ab>] handle_active_stripes+0x32b/0x440
[  135.299323] RSP: 0018:ffff8800b77a5c48  EFLAGS: 00010002
[  135.299344] RAX: ffff880037bb5c70 RBX: 0000000000000000 RCX: 0000000000000008
[  135.299371] RDX: ffff880037bb5cb8 RSI: 0000000000000001 RDI: ffff880037bb5c00
[  135.299398] RBP: ffff8800b77a5d08 R08: 0000000000000001 R09: 0000000000000000
[  135.299425] R10: ffff8800b77a5c98 R11: 00000000ffffffff R12: ffff880037bb5c00
[  135.299452] R13: 0000000000000000 R14: 0000000000000000 R15: ffff880037bb5c70
[  135.299479] FS:  0000000000000000(0000) GS:ffff88013fd80000(0000) knlGS:0000000000000000
[  135.299510] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[  135.299532] CR2: 0000000000000000 CR3: 0000000001c0b000 CR4: 00000000000407e0
[  135.299559] Stack:
[  135.299570]  ffff8800b77a5c88 ffffffff8107383e ffff8800b77a5c88 ffff880037a64300
[  135.299611]  000000000000ec08 ffff880037bb5cb8 ffff8800b77a5c98 ffffffffffffffd8
[  135.299654]  000000000000ec08 ffff880037bb5c60 ffff8800b77a5c98 ffff8800b77a5c98
[  135.299696] Call Trace:
[  135.299711]  [<ffffffff8107383e>] ? __wake_up+0x4e/0x70
[  135.299733]  [<ffffffff81518f88>] raid5d+0x4c8/0x680
[  135.299756]  [<ffffffff817174ed>] ? schedule_timeout+0x15d/0x1f0
[  135.299781]  [<ffffffff81524c9f>] md_thread+0x11f/0x170
[  135.299804]  [<ffffffff81069cd0>] ? wake_up_bit+0x40/0x40
[  135.299826]  [<ffffffff81524b80>] ? md_rdev_init+0x110/0x110
[  135.299850]  [<ffffffff81069656>] kthread+0xc6/0xd0
[  135.299871]  [<ffffffff81069590>] ? kthread_freezable_should_stop+0x70/0x70
[  135.299899]  [<ffffffff81722ffc>] ret_from_fork+0x7c/0xb0
[  135.299923]  [<ffffffff81069590>] ? kthread_freezable_should_stop+0x70/0x70
[  135.299951] Code: ff ff ff 0f 84 d7 fe ff ff e9 5c fe ff ff 66 90 41 8b b4 24 d8 01 00 00 45 31 ed 85 f6 0f 8e 7b fd ff ff 49 8b 9c 24 d0 01 00 00 <48> 3b 1b 49 89 dd 0f 85 67 fd ff ff 48 8d 43 28 31 d2 eb 17 90
[  135.300005] RIP  [<ffffffff815188ab>] handle_active_stripes+0x32b/0x440
[  135.300005]  RSP <ffff8800b77a5c48>
[  135.300005] CR2: 0000000000000000
[  135.300005] ---[ end trace 504854e5bb7562ed ]---
[  135.300005] Kernel panic - not syncing: Fatal exception

This is because raid5d() can be running when the multi-thread
resources are changed via system. We see need to provide locking.

mddev->device_lock is suitable, but we cannot simple call
alloc_thread_groups under this lock as we cannot allocate memory
while holding a spinlock.
So change alloc_thread_groups() to allocate and return the data
structures, then raid5_store_group_thread_cnt() can take the lock
while updating the pointers to the data structures.

This fixes a bug introduced in 3.12 and so is suitable for the 3.12.x
stable series.

Fixes: b721420e87
Cc: stable@vger.kernel.org (3.12)
Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Shaohua Li <shli@kernel.org>
2013-11-19 15:19:18 +11:00
majianpeng
d206dcfa98 md/raid5: Before freeing old multi-thread worker, it should flush them.
When changing group_thread_cnt from sysfs entry, the kernel can oops.

The kernel messages are:
[  740.961389] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
[  740.961444] IP: [<ffffffff81062570>] process_one_work+0x30/0x500
[  740.961476] PGD b9013067 PUD b651e067 PMD 0
[  740.961503] Oops: 0000 [#1] SMP
[  740.961525] Modules linked in: netconsole e1000e ptp pps_core
[  740.961577] CPU: 0 PID: 3683 Comm: kworker/u8:5 Not tainted 3.12.0+ #23
[  740.961602] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS 080015  11/09/2011
[  740.961646] task: ffff88013abe0000 ti: ffff88013a246000 task.ti: ffff88013a246000
[  740.961673] RIP: 0010:[<ffffffff81062570>]  [<ffffffff81062570>] process_one_work+0x30/0x500
[  740.961708] RSP: 0018:ffff88013a247e08  EFLAGS: 00010086
[  740.961730] RAX: ffff8800b912b400 RBX: ffff88013a61e680 RCX: ffff8800b912b400
[  740.961757] RDX: ffff8800b912b600 RSI: ffff8800b912b600 RDI: ffff88013a61e680
[  740.961782] RBP: ffff88013a247e48 R08: ffff88013a246000 R09: 000000000002c09d
[  740.961808] R10: 000000000000010f R11: 0000000000000000 R12: ffff88013b00cc00
[  740.961833] R13: 0000000000000000 R14: ffff88013b00cf80 R15: ffff88013a61e6b0
[  740.961861] FS:  0000000000000000(0000) GS:ffff88013fc00000(0000) knlGS:0000000000000000
[  740.961893] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[  740.962001] CR2: 00000000000000b8 CR3: 00000000b24fe000 CR4: 00000000000407f0
[  740.962001] Stack:
[  740.962001]  0000000000000008 ffff8800b912b600 ffff88013b00cc00 ffff88013a61e680
[  740.962001]  ffff88013b00cc00 ffff88013b00cc18 ffff88013b00cf80 ffff88013a61e6b0
[  740.962001]  ffff88013a247eb8 ffffffff810639c6 0000000000012a80 ffff88013a247fd8
[  740.962001] Call Trace:
[  740.962001]  [<ffffffff810639c6>] worker_thread+0x206/0x3f0
[  740.962001]  [<ffffffff810637c0>] ? manage_workers+0x2c0/0x2c0
[  740.962001]  [<ffffffff81069656>] kthread+0xc6/0xd0
[  740.962001]  [<ffffffff81069590>] ? kthread_freezable_should_stop+0x70/0x70
[  740.962001]  [<ffffffff81722ffc>] ret_from_fork+0x7c/0xb0
[  740.962001]  [<ffffffff81069590>] ? kthread_freezable_should_stop+0x70/0x70
[  740.962001] Code: 89 e5 41 57 41 56 41 55 45 31 ed 41 54 53 48 89 fb 48 83 ec 18 48 8b 06 4c 8b 67 48 48 89 c1 30 c9 a8 04 4c 0f 45 e9 80 7f 58 00 <49> 8b 45 08 44 8b b0 00 01 00 00 78 0c 41 f6 44 24 10 04 0f 84
[  740.962001] RIP  [<ffffffff81062570>] process_one_work+0x30/0x500
[  740.962001]  RSP <ffff88013a247e08>
[  740.962001] CR2: 0000000000000008
[  740.962001] ---[ end trace 39181460000748de ]---
[  740.962001] Kernel panic - not syncing: Fatal exception

This can happen if there are some stripes left, fewer than MAX_STRIPE_BATCH.
A worker is queued to handle them.
But before calling raid5_do_work, raid5d handles those
stripes making conf->active_stripe = 0.
So mddev_suspend() can return.
We might then free old worker resources before the queued
raid5_do_work() handled them.  When it runs, it crashes.

	raid5d()		raid5_store_group_thread_cnt()
	queue_work		mddev_suspend()
				handle_strips
				active_stripe=0
				free(old worker resources)
	process_one_work
	raid5_do_work

To avoid this, we should only flush the worker resources before freeing them.

This fixes a bug introduced in 3.12 so is suitable for the 3.12.x
stable series.

Cc: stable@vger.kernel.org (3.12)
Fixes: b721420e87
Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Shaohua Li <shli@kernel.org>
2013-11-19 15:19:18 +11:00
majianpeng
e59aa23f4c md/raid5: For stripe with R5_ReadNoMerge, we replace REQ_FLUSH with REQ_NOMERGE.
For R5_ReadNoMerge,it mean this bio can't merge with other bios or
request.It used REQ_FLUSH to achieve this. But REQ_NOMERGE can do the
same work.

Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2013-11-19 15:19:18 +11:00