Add benchmark to measure the throughput and latency of the bpf_loop
call.
Testing this on my dev machine on 1 thread, the data is as follows:
nr_loops: 10
bpf_loop - throughput: 198.519 ± 0.155 M ops/s, latency: 5.037 ns/op
nr_loops: 100
bpf_loop - throughput: 247.448 ± 0.305 M ops/s, latency: 4.041 ns/op
nr_loops: 500
bpf_loop - throughput: 260.839 ± 0.380 M ops/s, latency: 3.834 ns/op
nr_loops: 1000
bpf_loop - throughput: 262.806 ± 0.629 M ops/s, latency: 3.805 ns/op
nr_loops: 5000
bpf_loop - throughput: 264.211 ± 1.508 M ops/s, latency: 3.785 ns/op
nr_loops: 10000
bpf_loop - throughput: 265.366 ± 3.054 M ops/s, latency: 3.768 ns/op
nr_loops: 50000
bpf_loop - throughput: 235.986 ± 20.205 M ops/s, latency: 4.238 ns/op
nr_loops: 100000
bpf_loop - throughput: 264.482 ± 0.279 M ops/s, latency: 3.781 ns/op
nr_loops: 500000
bpf_loop - throughput: 309.773 ± 87.713 M ops/s, latency: 3.228 ns/op
nr_loops: 1000000
bpf_loop - throughput: 262.818 ± 4.143 M ops/s, latency: 3.805 ns/op
>From this data, we can see that the latency per loop decreases as the
number of loops increases. On this particular machine, each loop had an
overhead of about ~4 ns, and we were able to run ~250 million loops
per second.
Signed-off-by: Joanne Koong <joannekoong@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211130030622.4131246-5-joannekoong@fb.com
This patch tests bpf_loop in pyperf and strobemeta, and measures the
verifier performance of replacing the traditional for loop
with bpf_loop.
The results are as follows:
~strobemeta~
Baseline
verification time 6808200 usec
stack depth 496
processed 554252 insns (limit 1000000) max_states_per_insn 16
total_states 15878 peak_states 13489 mark_read 3110
#192 verif_scale_strobemeta:OK (unrolled loop)
Using bpf_loop
verification time 31589 usec
stack depth 96+400
processed 1513 insns (limit 1000000) max_states_per_insn 2
total_states 106 peak_states 106 mark_read 60
#193 verif_scale_strobemeta_bpf_loop:OK
~pyperf600~
Baseline
verification time 29702486 usec
stack depth 368
processed 626838 insns (limit 1000000) max_states_per_insn 7
total_states 30368 peak_states 30279 mark_read 748
#182 verif_scale_pyperf600:OK (unrolled loop)
Using bpf_loop
verification time 148488 usec
stack depth 320+40
processed 10518 insns (limit 1000000) max_states_per_insn 10
total_states 705 peak_states 517 mark_read 38
#183 verif_scale_pyperf600_bpf_loop:OK
Using the bpf_loop helper led to approximately a 99% decrease
in the verification time and in the number of instructions.
Signed-off-by: Joanne Koong <joannekoong@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211130030622.4131246-4-joannekoong@fb.com
Similar to previous patch, just copy over necessary struct into local
stack variable before checking its fields.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211124002325.1737739-14-andrii@kernel.org
Buf can be not zero-terminated leading to strstr() to access data beyond
the intended buf[] array. Fix by forcing zero termination.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211124002325.1737739-12-andrii@kernel.org
Perfbuf doesn't guarantee 8-byte alignment of the data like BPF ringbuf
does, so struct get_stack_trace_t can arrive not properly aligned for
subsequent u64 accesses. Easiest fix is to just copy data locally.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211124002325.1737739-10-andrii@kernel.org
Prevent sanitizer from complaining about passing NULL into memcpy(),
even if it happens with zero size.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211124002325.1737739-9-andrii@kernel.org
Test is using __int128 variable as unsigned and highest order bit can be
set to 1 after bit shift. Use unsigned __int128 explicitly and prevent
UBSan from complaining.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211124002325.1737739-8-andrii@kernel.org
Conversion is straightforward for most cases. In few cases tests are
using mutable map_flags and attribute structs, but bpf_map_create_opts
can be used in the similar fashion, so there were no problems. Just lots
of repetitive conversions.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211124193233.3115996-5-andrii@kernel.org
Add selftest that combines two BPF programs within single BPF object
file such that one of the programs is using global variables, but can be
skipped at runtime on old kernels that don't support global data.
Another BPF program is written with the goal to be runnable on very old
kernels and only relies on explicitly accessed BPF maps.
Such test, run against old kernels (e.g., libbpf CI will run it against 4.9
kernel that doesn't support global data), allows to test the approach
and ensure that libbpf doesn't make unnecessary assumption about
necessary kernel features.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211123200105.387855-2-andrii@kernel.org
Fix trivial typo in comment from 'oveflow' to 'overflow'.
Reported-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Drew Fustini <dfustini@baylibre.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211122070528.837806-1-dfustini@baylibre.com
bpf_program__set_extra_flags has just been introduced so we can still
change it without breaking users.
This new interface is a bit more flexible (for example if someone wants
to clear a flag).
Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211119180035.1396139-1-revest@chromium.org
Add an artificial minimal example simulating compilers producing two
different types within a single CU that correspond to identical struct
definitions.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211117194114.347675-2-andrii@kernel.org
[1] added s390 support to libbpf CI and added an ${ARCH} prefix to a
number of paths and identifiers in libbpf GitHub repo, which vmtest.sh
relies upon. Update these and make use of the new s390 support.
[1] https://github.com/libbpf/libbpf/pull/204
Co-developed-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211118115225.1349726-1-iii@linux.ibm.com
xsk_configure_umem() needs hugepages to work in unaligned mode. So when
hugepages are not configured, 'unaligned' tests should be skipped which
is determined by the helper function hugepages_present(). This function
erroneously returns true with MAP_NORESERVE flag even when no hugepages
are configured. The removal of this flag fixes the issue.
The test TEST_TYPE_UNALIGNED_INV_DESC also needs to be skipped when
there are no hugepages. However, this was not skipped as there was no
check for presence of hugepages and hence was failing. The check to skip
the test has now been added.
Fixes: a4ba98dd0c (selftests: xsk: Add test for unaligned mode)
Signed-off-by: Tirthendu Sarkar <tirthendu.sarkar@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211117123613.22288-1-tirthendu.sarkar@intel.com
Add benchmark to measure overhead of uprobes and uretprobes. Also have
a baseline (no uprobe attached) benchmark.
On my dev machine, baseline benchmark can trigger 130M user_target()
invocations. When uprobe is attached, this falls to just 700K. With
uretprobe, we get down to 520K:
$ sudo ./bench trig-uprobe-base -a
Summary: hits 131.289 ± 2.872M/s
# UPROBE
$ sudo ./bench -a trig-uprobe-without-nop
Summary: hits 0.729 ± 0.007M/s
$ sudo ./bench -a trig-uprobe-with-nop
Summary: hits 1.798 ± 0.017M/s
# URETPROBE
$ sudo ./bench -a trig-uretprobe-without-nop
Summary: hits 0.508 ± 0.012M/s
$ sudo ./bench -a trig-uretprobe-with-nop
Summary: hits 0.883 ± 0.008M/s
So there is almost 2.5x performance difference between probing nop vs
non-nop instruction for entry uprobe. And 1.7x difference for uretprobe.
This means that non-nop uprobe overhead is around 1.4 microseconds for uprobe
and 2 microseconds for non-nop uretprobe.
For nop variants, uprobe and uretprobe overhead is down to 0.556 and
1.13 microseconds, respectively.
For comparison, just doing a very low-overhead syscall (with no BPF
programs attached anywhere) gives:
$ sudo ./bench trig-base -a
Summary: hits 4.830 ± 0.036M/s
So uprobes are about 2.67x slower than pure context switch.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211116013041.4072571-1-andrii@kernel.org
Script test_bpftool_synctypes.py parses a number of files in the bpftool
directory (or even elsewhere in the repo) to make sure that the list of
types or options in those different files are consistent. Instead of
having fixed paths, let's make the directories configurable through
environment variable. This should make easier in the future to run the
script in a different setup, for example on an out-of-tree bpftool
mirror with a different layout.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211115225844.33943-4-quentin@isovalent.com
test_bpftool_synctypes.py helps detecting inconsistencies in bpftool
between the different list of types and options scattered in the
sources, the documentation, and the bash completion. For options that
apply to all bpftool commands, the script had a hardcoded list of
values, and would use them to check whether the man pages are
up-to-date. When writing the script, it felt acceptable to have this
list in order to avoid to open and parse bpftool's main.h every time,
and because the list of global options in bpftool doesn't change so
often.
However, this is prone to omissions, and we recently added a new
-l|--legacy option which was described in common_options.rst, but not
listed in the options summary of each manual page. The script did not
complain, because it keeps comparing the hardcoded list to the (now)
outdated list in the header file.
To address the issue, this commit brings the following changes:
- Options that are common to all bpftool commands (--json, --pretty, and
--debug) are moved to a dedicated file, and used in the definition of
a RST substitution. This substitution is used in the sources of all
the man pages.
- This list of common options is updated, with the addition of the new
-l|--legacy option.
- The script test_bpftool_synctypes.py is updated to compare:
- Options specific to a command, found in C files, for the
interactive help messages, with the same specific options from the
relevant man page for that command.
- Common options, checked just once: the list in main.h is
compared with the new list in substitutions.rst.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211115225844.33943-3-quentin@isovalent.com
Without previous libbpf patch, the following error will occur:
$ ./test_progs -t btf
...
do_test_dedup:FAIL:check btf_dedup failed errno:-22#13/205 btf/dedup: btf_type_tag #5, struct:FAIL
And the previous libbpf patch fixed the issue.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211115163943.3922547-1-yhs@fb.com
Daniel Borkmann says:
====================
pull-request: bpf-next 2021-11-15
We've added 72 non-merge commits during the last 13 day(s) which contain
a total of 171 files changed, 2728 insertions(+), 1143 deletions(-).
The main changes are:
1) Add btf_type_tag attributes to bring kernel annotations like __user/__rcu to
BTF such that BPF verifier will be able to detect misuse, from Yonghong Song.
2) Big batch of libbpf improvements including various fixes, future proofing APIs,
and adding a unified, OPTS-based bpf_prog_load() low-level API, from Andrii Nakryiko.
3) Add ingress_ifindex to BPF_SK_LOOKUP program type for selectively applying the
programmable socket lookup logic to packets from a given netdev, from Mark Pashmfouroush.
4) Remove the 128M upper JIT limit for BPF programs on arm64 and add selftest to
ensure exception handling still works, from Russell King and Alan Maguire.
5) Add a new bpf_find_vma() helper for tracing to map an address to the backing
file such as shared library, from Song Liu.
6) Batch of various misc fixes to bpftool, fixing a memory leak in BPF program dump,
updating documentation and bash-completion among others, from Quentin Monnet.
7) Deprecate libbpf bpf_program__get_prog_info_linear() API and migrate its users as
the API is heavily tailored around perf and is non-generic, from Dave Marchevsky.
8) Enable libbpf's strict mode by default in bpftool and add a --legacy option as an
opt-out for more relaxed BPF program requirements, from Stanislav Fomichev.
9) Fix bpftool to use libbpf_get_error() to check for errors, from Hengqi Chen.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (72 commits)
bpftool: Use libbpf_get_error() to check error
bpftool: Fix mixed indentation in documentation
bpftool: Update the lists of names for maps and prog-attach types
bpftool: Fix indent in option lists in the documentation
bpftool: Remove inclusion of utilities.mak from Makefiles
bpftool: Fix memory leak in prog_dump()
selftests/bpf: Fix a tautological-constant-out-of-range-compare compiler warning
selftests/bpf: Fix an unused-but-set-variable compiler warning
bpf: Introduce btf_tracing_ids
bpf: Extend BTF_ID_LIST_GLOBAL with parameter for number of IDs
bpftool: Enable libbpf's strict mode by default
docs/bpf: Update documentation for BTF_KIND_TYPE_TAG support
selftests/bpf: Clarify llvm dependency with btf_tag selftest
selftests/bpf: Add a C test for btf_type_tag
selftests/bpf: Rename progs/tag.c to progs/btf_decl_tag.c
selftests/bpf: Test BTF_KIND_DECL_TAG for deduplication
selftests/bpf: Add BTF_KIND_TYPE_TAG unit tests
selftests/bpf: Test libbpf API function btf__add_type_tag()
bpftool: Support BTF_KIND_TYPE_TAG
libbpf: Support BTF_KIND_TYPE_TAG
...
====================
Link: https://lore.kernel.org/r/20211115162008.25916-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When using clang to build selftests with LLVM=1 in make commandline,
I hit the following compiler warning:
benchs/bench_bloom_filter_map.c:84:46: warning: result of comparison of constant 256
with expression of type '__u8' (aka 'unsigned char') is always false
[-Wtautological-constant-out-of-range-compare]
if (args.value_size < 2 || args.value_size > 256) {
~~~~~~~~~~~~~~~ ^ ~~~
The reason is arg.vaue_size has type __u8, so comparison "args.value_size > 256"
is always false.
This patch fixed the issue by doing proper comparison before assigning the
value to args.value_size. The patch also fixed the same issue in two
other places.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211112204838.3579953-1-yhs@fb.com
When using clang to build selftests with LLVM=1 in make commandline,
I hit the following compiler warning:
xdpxceiver.c:747:6: warning: variable 'total' set but not used [-Wunused-but-set-variable]
u32 total = 0;
^
This patch fixed the issue by removing that declaration and its
assocatied unused operation.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211112204833.3579457-1-yhs@fb.com
btf_tag selftest needs certain llvm versions (>= llvm14).
Make it clear in the selftests README.rst file.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211112012651.1508549-1-yhs@fb.com
The following is the main btf_type_tag usage in the
C test:
#define __tag1 __attribute__((btf_type_tag("tag1")))
#define __tag2 __attribute__((btf_type_tag("tag2")))
struct btf_type_tag_test {
int __tag1 * __tag1 __tag2 *p;
} g;
The bpftool raw dump with related types:
[4] INT 'int' size=4 bits_offset=0 nr_bits=32 encoding=SIGNED
[11] STRUCT 'btf_type_tag_test' size=8 vlen=1
'p' type_id=14 bits_offset=0
[12] TYPE_TAG 'tag1' type_id=16
[13] TYPE_TAG 'tag2' type_id=12
[14] PTR '(anon)' type_id=13
[15] TYPE_TAG 'tag1' type_id=4
[16] PTR '(anon)' type_id=15
[17] VAR 'g' type_id=11, linkage=global
With format C dump, we have
struct btf_type_tag_test {
int __attribute__((btf_type_tag("tag1"))) * __attribute__((btf_type_tag("tag1"))) __attribute__((btf_type_tag("tag2"))) *p;
};
The result C code is identical to the original definition except macro's are gone.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211112012646.1508231-1-yhs@fb.com
Rename progs/tag.c to progs/btf_decl_tag.c so we can introduce
progs/btf_type_tag.c in the next patch.
Also create a subtest for btf_decl_tag in prog_tests/btf_tag.c
so we can introduce btf_type_tag subtest in the next patch.
I also took opportunity to remove the check whether __has_attribute
is defined or not in progs/btf_decl_tag.c since all recent
clangs should already support this macro.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211112012641.1507144-1-yhs@fb.com
btf__dedup() and struct btf_dedup_opts were added before we figured out
OPTS mechanism. As such, btf_dedup_opts is non-extensible without
breaking an ABI and potentially crashing user application.
Unfortunately, btf__dedup() and btf_dedup_opts are short and succinct
names that would be great to preserve and use going forward. So we use
___libbpf_override() macro approach, used previously for bpf_prog_load()
API, to define a new btf__dedup() variant that accepts only struct btf *
and struct btf_dedup_opts * arguments, and rename the old btf__dedup()
implementation into btf__dedup_deprecated(). This keeps both source and
binary compatibility with old and new applications.
The biggest problem was struct btf_dedup_opts, which wasn't OPTS-based,
and as such doesn't have `size_t sz;` as a first field. But btf__dedup()
is a pretty rarely used API and I believe that the only currently known
users (besides selftests) are libbpf's own bpf_linker and pahole.
Neither use case actually uses options and just passes NULL. So instead
of doing extra hacks, just rewrite struct btf_dedup_opts into OPTS-based
one, move btf_ext argument into those opts (only bpf_linker needs to
dedup btf_ext, so it's not a typical thing to specify), and drop never
used `dont_resolve_fwds` option (it was never used anywhere, AFAIK, it
makes BTF dedup much less useful and efficient).
Just in case, for old implementation, btf__dedup_deprecated(), detect
non-NULL options and error out with helpful message, to help users
migrate, if there are any user playing with btf__dedup().
The last remaining piece is dedup_table_size, which is another
anachronism from very early days of BTF dedup. Since then it has been
reduced to the only valid value, 1, to request forced hash collisions.
This is only used during testing. So instead introduce a bool flag to
force collisions explicitly.
This patch also adapts selftests to new btf__dedup() and btf_dedup_opts
use to avoid selftests breakage.
[0] Closes: https://github.com/libbpf/libbpf/issues/281
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211111053624.190580-4-andrii@kernel.org
Few clean ups and single-line simplifications. Also split CLEAN command
into multiple $(RM) invocations as it gets dangerously close to too long
argument list. Make sure that -o <output.o> is used always as the last
argument for saner verbose make output.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211111053624.190580-3-andrii@kernel.org
After recent refactoring bpf_prog_test_load(), used across multiple
selftests, lost ability to specify extra log_level 1 or 2 (for -vv and
-vvv, respectively). Fix that problem by using bpf_object__load_xattr()
API that supports extra log_level flags. Also restore
BPF_F_TEST_RND_HI32 prog_flags by utilizing new bpf_program__set_extra_flags()
API.
Fixes: f87c1930ac ("selftests/bpf: Merge test_stub.c into testing_helpers.c")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211111051758.92283-3-andrii@kernel.org
and netfilter.
Current release - regressions:
- bpf: do not reject when the stack read size is different
from the tracked scalar size
- net: fix premature exit from NAPI state polling in napi_disable()
- riscv, bpf: fix RV32 broken build, and silence RV64 warning
Current release - new code bugs:
- net: fix possible NULL deref in sock_reserve_memory
- amt: fix error return code in amt_init(); fix stopping the workqueue
- ax88796c: use the correct ioctl callback
Previous releases - always broken:
- bpf: stop caching subprog index in the bpf_pseudo_func insn
- security: fixups for the security hooks in sctp
- nfc: add necessary privilege flags in netlink layer, limit operations
to admin only
- vsock: prevent unnecessary refcnt inc for non-blocking connect
- net/smc: fix sk_refcnt underflow on link down and fallback
- nfnetlink_queue: fix OOB when mac header was cleared
- can: j1939: ignore invalid messages per standard
- bpf, sockmap:
- fix race in ingress receive verdict with redirect to self
- fix incorrect sk_skb data_end access when src_reg = dst_reg
- strparser, and tls are reusing qdisc_skb_cb and colliding
- ethtool: fix ethtool msg len calculation for pause stats
- vlan: fix a UAF in vlan_dev_real_dev() when ref-holder tries
to access an unregistering real_dev
- udp6: make encap_rcv() bump the v6 not v4 stats
- drv: prestera: add explicit padding to fix m68k build
- drv: felix: fix broken VLAN-tagged PTP under VLAN-aware bridge
- drv: mvpp2: fix wrong SerDes reconfiguration order
Misc & small latecomers:
- ipvs: auto-load ipvs on genl access
- mctp: sanity check the struct sockaddr_mctp padding fields
- libfs: support RENAME_EXCHANGE in simple_rename()
- avoid double accounting for pure zerocopy skbs
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Ttgq
-----END PGP SIGNATURE-----
Merge tag 'net-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, can and netfilter.
Current release - regressions:
- bpf: do not reject when the stack read size is different from the
tracked scalar size
- net: fix premature exit from NAPI state polling in napi_disable()
- riscv, bpf: fix RV32 broken build, and silence RV64 warning
Current release - new code bugs:
- net: fix possible NULL deref in sock_reserve_memory
- amt: fix error return code in amt_init(); fix stopping the
workqueue
- ax88796c: use the correct ioctl callback
Previous releases - always broken:
- bpf: stop caching subprog index in the bpf_pseudo_func insn
- security: fixups for the security hooks in sctp
- nfc: add necessary privilege flags in netlink layer, limit
operations to admin only
- vsock: prevent unnecessary refcnt inc for non-blocking connect
- net/smc: fix sk_refcnt underflow on link down and fallback
- nfnetlink_queue: fix OOB when mac header was cleared
- can: j1939: ignore invalid messages per standard
- bpf, sockmap:
- fix race in ingress receive verdict with redirect to self
- fix incorrect sk_skb data_end access when src_reg = dst_reg
- strparser, and tls are reusing qdisc_skb_cb and colliding
- ethtool: fix ethtool msg len calculation for pause stats
- vlan: fix a UAF in vlan_dev_real_dev() when ref-holder tries to
access an unregistering real_dev
- udp6: make encap_rcv() bump the v6 not v4 stats
- drv: prestera: add explicit padding to fix m68k build
- drv: felix: fix broken VLAN-tagged PTP under VLAN-aware bridge
- drv: mvpp2: fix wrong SerDes reconfiguration order
Misc & small latecomers:
- ipvs: auto-load ipvs on genl access
- mctp: sanity check the struct sockaddr_mctp padding fields
- libfs: support RENAME_EXCHANGE in simple_rename()
- avoid double accounting for pure zerocopy skbs"
* tag 'net-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (123 commits)
selftests/net: udpgso_bench_rx: fix port argument
net: wwan: iosm: fix compilation warning
cxgb4: fix eeprom len when diagnostics not implemented
net: fix premature exit from NAPI state polling in napi_disable()
net/smc: fix sk_refcnt underflow on linkdown and fallback
net/mlx5: Lag, fix a potential Oops with mlx5_lag_create_definer()
gve: fix unmatched u64_stats_update_end()
net: ethernet: lantiq_etop: Fix compilation error
selftests: forwarding: Fix packet matching in mirroring selftests
vsock: prevent unnecessary refcnt inc for nonblocking connect
net: marvell: mvpp2: Fix wrong SerDes reconfiguration order
net: ethernet: ti: cpsw_ale: Fix access to un-initialized memory
net: stmmac: allow a tc-taprio base-time of zero
selftests: net: test_vxlan_under_vrf: fix HV connectivity test
net: hns3: allow configure ETS bandwidth of all TCs
net: hns3: remove check VF uc mac exist when set by PF
net: hns3: fix some mac statistics is always 0 in device version V2
net: hns3: fix kernel crash when unload VF while it is being reset
net: hns3: sync rx ring head in echo common pull
net: hns3: fix pfc packet number incorrect after querying pfc parameters
...
The below commit added optional support for passing a bind address.
It configures the sockaddr bind arguments before parsing options and
reconfigures on options -b and -4.
This broke support for passing port (-p) on its own.
Configure sockaddr after parsing all arguments.
Fixes: 3327a9c463 ("selftests: add functionals test for UDP GRO")
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A new field was added to the bpf_sk_lookup data that users can access.
Add tests that validate that the new ingress_ifindex field contains the
right data.
Signed-off-by: Mark Pashmfouroush <markpash@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211110111016.5670-3-markpash@cloudflare.com
In commit 6de6e46d27 ("cls_flower: Fix inability to match GRE/IPIP
packets"), cls_flower was fixed to match an outer packet of a tunneled
packet as would be expected, rather than dissecting to the inner packet and
matching on that.
This fix uncovered several issues in packet matching in mirroring
selftests:
- in mirror_gre_bridge_1d_vlan.sh and mirror_gre_vlan_bridge_1q.sh, the
vlan_ethtype match is copied around as "ip", even as some of the tests
are running over ip6gretap. This is fixed by using an "ipv6" for
vlan_ethtype in the ip6gretap tests.
- in mirror_gre_changes.sh, a filter to count GRE packets is set up to
match TTL of 50. This used to trigger in the offloaded datapath, where
the envelope TTL was matched, but not in the software datapath, which
considered TTL of the inner packet. Now that both match consistently, all
the packets were double-counted. This is fixed by marking the filter as
skip_hw, leaving only the SW datapath component active.
Fixes: 6de6e46d27 ("cls_flower: Fix inability to match GRE/IPIP packets")
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It looks like test_vxlan_under_vrf.sh is always failing to verify the
connectivity test during the ping between the two simulated VMs.
This is due to the fact that veth-hv in each VM should have a distinct
MAC address.
Fix by setting a unique MAC address on each simulated VM interface.
Without this fix:
$ sudo ./tools/testing/selftests/net/test_vxlan_under_vrf.sh
Checking HV connectivity [ OK ]
Check VM connectivity through VXLAN (underlay in the default VRF) [FAIL]
With this fix applied:
$ sudo ./tools/testing/selftests/net/test_vxlan_under_vrf.sh
Checking HV connectivity [ OK ]
Check VM connectivity through VXLAN (underlay in the default VRF) [ OK ]
Check VM connectivity through VXLAN (underlay in a VRF) [FAIL]
NOTE: the connectivity test with the underlay VRF is still failing; it
seems that ARP requests are blocked at the simulated hypervisor level,
probably due to some missing ARP forwarding rules. This requires more
investigation (in the meantime we may consider to set that test as
expected failure - XFAIL).
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov says:
====================
pull-request: bpf 2021-11-09
We've added 7 non-merge commits during the last 3 day(s) which contain
a total of 10 files changed, 174 insertions(+), 48 deletions(-).
The main changes are:
1) Various sockmap fixes, from John and Jussi.
2) Fix out-of-bound issue with bpf_pseudo_func, from Martin.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, sockmap: sk_skb data_end access incorrect when src_reg = dst_reg
bpf: sockmap, strparser, and tls are reusing qdisc_skb_cb and colliding
bpf, sockmap: Fix race in ingress receive verdict with redirect to self
bpf, sockmap: Remove unhash handler for BPF sockmap usage
bpf, sockmap: Use stricter sk state checks in sk_lookup_assign
bpf: selftest: Trigger a DCE on the whole subprog
bpf: Stop caching subprog index in the bpf_pseudo_func insn
====================
Link: https://lore.kernel.org/r/20211109215702.38350-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Merge more updates from Andrew Morton:
"87 patches.
Subsystems affected by this patch series: mm (pagecache and hugetlb),
procfs, misc, MAINTAINERS, lib, checkpatch, binfmt, kallsyms, ramfs,
init, codafs, nilfs2, hfs, crash_dump, signals, seq_file, fork,
sysvfs, kcov, gdb, resource, selftests, and ipc"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (87 commits)
ipc/ipc_sysctl.c: remove fallback for !CONFIG_PROC_SYSCTL
ipc: check checkpoint_restore_ns_capable() to modify C/R proc files
selftests/kselftest/runner/run_one(): allow running non-executable files
virtio-mem: disallow mapping virtio-mem memory via /dev/mem
kernel/resource: disallow access to exclusive system RAM regions
kernel/resource: clean up and optimize iomem_is_exclusive()
scripts/gdb: handle split debug for vmlinux
kcov: replace local_irq_save() with a local_lock_t
kcov: avoid enable+disable interrupts if !in_task()
kcov: allocate per-CPU memory on the relevant node
Documentation/kcov: define `ip' in the example
Documentation/kcov: include types.h in the example
sysv: use BUILD_BUG_ON instead of runtime check
kernel/fork.c: unshare(): use swap() to make code cleaner
seq_file: fix passing wrong private data
seq_file: move seq_escape() to a header
signal: remove duplicate include in signal.h
crash_dump: remove duplicate include in crash_dump.h
crash_dump: fix boolreturn.cocci warning
hfs/hfsplus: use WARN_ON for sanity check
...
When running a test program, 'run_one()' checks if the program has the
execution permission and fails if it doesn't. However, it's easy to
mistakenly lose the permissions, as some common tools like 'diff' don't
support the permission change well[1]. Compared to that, making mistakes
in the test program's path would only rare, as those are explicitly listed
in 'TEST_PROGS'. Therefore, it might make more sense to resolve the
situation on our own and run the program.
For this reason, this commit makes the test program runner function still
print the warning message but to try parsing the interpreter of the
program and to explicitly run it with the interpreter, in this case.
[1] https://lore.kernel.org/mm-commits/YRJisBs9AunccCD4@kroah.com/
Link: https://lkml.kernel.org/r/20210810164534.25902-1-sj38.park@gmail.com
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Exception handling is triggered in BPF tracing programs when a NULL pointer
is dereferenced; the exception handler zeroes the target register and
execution of the BPF program progresses.
To test exception handling then, we need to trigger a NULL pointer dereference
for a field which should never be zero; if it is, the only explanation is the
exception handler ran. task->task_works is the NULL pointer chosen (for a new
task from fork() no work is associated), and the task_works->func field should
not be zero if task_works is non-NULL. The test verifies that task_works and
task_works->func are 0.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1636131046-5982-3-git-send-email-alan.maguire@oracle.com
- Fix support for platforms that do not enumerate every ACPI0016 (CXL
Host Bridge) in the CHBS (ACPI Host Bridge Structure).
- Introduce a common pci_find_dvsec_capability() helper, clean up open
coded implementations in various drivers.
- Add 'cxl_test' for regression testing CXL subsystem ABIs. 'cxl_test'
is a module built from tools/testing/cxl/ that mocks up a CXL topology
to augment the nascent support for emulation of CXL devices in QEMU.
- Convert libnvdimm to use the uuid API.
- Complete the definition of CXL namespace labels in libnvdimm.
- Tunnel libnvdimm label operations from nd_ioctl() back to the CXL
mailbox driver. Enable 'ndctl {read,write}-labels' for CXL.
- Continue to sort and refactor functionality into distinct driver and
core-infrastructure buckets. For example, mailbox handling is now a
generic core capability consumed by the PCI and cxl_test drivers.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCYYRtyQAKCRDfioYZHlFs
Z7UsAP9DzUN6IWWnYk1R95YXYVxFriRtRsBjujAqTg49EMghawEAoHaA9lxO3Hho
l25TLYUOmB/zFTlUbe6YQptMJZ5YLwY=
=im9j
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl updates from Dan Williams:
"More preparation and plumbing work in the CXL subsystem.
From an end user perspective the highlight here is lighting up the CXL
Persistent Memory related commands (label read / write) with the
generic ioctl() front-end in LIBNVDIMM.
Otherwise, the ability to instantiate new persistent and volatile
memory regions is still on track for v5.17.
Summary:
- Fix support for platforms that do not enumerate every ACPI0016 (CXL
Host Bridge) in the CHBS (ACPI Host Bridge Structure).
- Introduce a common pci_find_dvsec_capability() helper, clean up
open coded implementations in various drivers.
- Add 'cxl_test' for regression testing CXL subsystem ABIs.
'cxl_test' is a module built from tools/testing/cxl/ that mocks up
a CXL topology to augment the nascent support for emulation of CXL
devices in QEMU.
- Convert libnvdimm to use the uuid API.
- Complete the definition of CXL namespace labels in libnvdimm.
- Tunnel libnvdimm label operations from nd_ioctl() back to the CXL
mailbox driver. Enable 'ndctl {read,write}-labels' for CXL.
- Continue to sort and refactor functionality into distinct driver
and core-infrastructure buckets. For example, mailbox handling is
now a generic core capability consumed by the PCI and cxl_test
drivers"
* tag 'cxl-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (34 commits)
ocxl: Use pci core's DVSEC functionality
cxl/pci: Use pci core's DVSEC functionality
PCI: Add pci_find_dvsec_capability to find designated VSEC
cxl/pci: Split cxl_pci_setup_regs()
cxl/pci: Add @base to cxl_register_map
cxl/pci: Make more use of cxl_register_map
cxl/pci: Remove pci request/release regions
cxl/pci: Fix NULL vs ERR_PTR confusion
cxl/pci: Remove dev_dbg for unknown register blocks
cxl/pci: Convert register block identifiers to an enum
cxl/acpi: Do not fail cxl_acpi_probe() based on a missing CHBS
cxl/pci: Disambiguate cxl_pci further from cxl_mem
Documentation/cxl: Add bus internal docs
cxl/core: Split decoder setup into alloc + add
tools/testing/cxl: Introduce a mock memory device + driver
cxl/mbox: Move command definitions to common location
cxl/bus: Populate the target list at decoder create
tools/testing/cxl: Introduce a mocked-up CXL port hierarchy
cxl/pmem: Add support for multiple nvdimm-bridge objects
cxl/pmem: Translate NVDIMM label commands to CXL label commands
...
