* 'for-2.6.31' of git://git.kernel.dk/linux-2.6-block: (153 commits)
block: add request clone interface (v2)
floppy: fix hibernation
ramdisk: remove long-deprecated "ramdisk=" boot-time parameter
fs/bio.c: add missing __user annotation
block: prevent possible io_context->refcount overflow
Add serial number support for virtio_blk, V4a
block: Add missing bounce_pfn stacking and fix comments
Revert "block: Fix bounce limit setting in DM"
cciss: decode unit attention in SCSI error handling code
cciss: Remove no longer needed sendcmd reject processing code
cciss: change SCSI error handling routines to work with interrupts enabled.
cciss: separate error processing and command retrying code in sendcmd_withirq_core()
cciss: factor out fix target status processing code from sendcmd functions
cciss: simplify interface of sendcmd() and sendcmd_withirq()
cciss: factor out core of sendcmd_withirq() for use by SCSI error handling code
cciss: Use schedule_timeout_uninterruptible in SCSI error handling code
block: needs to set the residual length of a bidi request
Revert "block: implement blkdev_readpages"
block: Fix bounce limit setting in DM
Removed reference to non-existing file Documentation/PCI/PCI-DMA-mapping.txt
...
Manually fix conflicts with tracing updates in:
block/blk-sysfs.c
drivers/ide/ide-atapi.c
drivers/ide/ide-cd.c
drivers/ide/ide-floppy.c
drivers/ide/ide-tape.c
include/trace/events/block.h
kernel/trace/blktrace.c
* 'tracing-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
function-graph: always initialize task ret_stack
function-graph: move initialization of new tasks up in fork
function-graph: add memory barriers for accessing task's ret_stack
function-graph: enable the stack after initialization of other variables
function-graph: only allocate init tasks if it was not already done
Manually fix trivial conflict in kernel/trace/ftrace.c
* 'tracing-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (244 commits)
Revert "x86, bts: reenable ptrace branch trace support"
tracing: do not translate event helper macros in print format
ftrace/documentation: fix typo in function grapher name
tracing/events: convert block trace points to TRACE_EVENT(), fix !CONFIG_BLOCK
tracing: add protection around module events unload
tracing: add trace_seq_vprint interface
tracing: fix the block trace points print size
tracing/events: convert block trace points to TRACE_EVENT()
ring-buffer: fix ret in rb_add_time_stamp
ring-buffer: pass in lockdep class key for reader_lock
tracing: add annotation to what type of stack trace is recorded
tracing: fix multiple use of __print_flags and __print_symbolic
tracing/events: fix output format of user stack
tracing/events: fix output format of kernel stack
tracing/trace_stack: fix the number of entries in the header
ring-buffer: discard timestamps that are at the start of the buffer
ring-buffer: try to discard unneeded timestamps
ring-buffer: fix bug in ring_buffer_discard_commit
ftrace: do not profile functions when disabled
tracing: make trace pipe recognize latency format flag
...
When reading the trace buffer, there is a race that when a module
is unloaded it removes events that is stilled referenced in the buffers.
This patch adds the protection around the unloading of the events
from modules and the reading of the trace buffers.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The code to update the print formats for events requires a vprintf
format in the trace_seq. This patch adds that interface.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
TRACE_EVENT is a more generic way to define tracepoints. Doing so adds
these new capabilities to this tracepoint:
- zero-copy and per-cpu splice() tracing
- binary tracing without printf overhead
- structured logging records exposed under /debug/tracing/events
- trace events embedded in function tracer output and other plugins
- user-defined, per tracepoint filter expressions
...
Cons:
- no dev_t info for the output of plug, unplug_timer and unplug_io events.
no dev_t info for getrq and sleeprq events if bio == NULL.
no dev_t info for rq_abort,...,rq_requeue events if rq->rq_disk == NULL.
This is mainly because we can't get the deivce from a request queue.
But this may change in the future.
- A packet command is converted to a string in TP_assign, not TP_print.
While blktrace do the convertion just before output.
Since pc requests should be rather rare, this is not a big issue.
- In blktrace, an event can have 2 different print formats, but a TRACE_EVENT
has a unique format, which means we have some unused data in a trace entry.
The overhead is minimized by using __dynamic_array() instead of __array().
I've benchmarked the ioctl blktrace vs the splice based TRACE_EVENT tracing:
dd dd + ioctl blktrace dd + TRACE_EVENT (splice)
1 7.36s, 42.7 MB/s 7.50s, 42.0 MB/s 7.41s, 42.5 MB/s
2 7.43s, 42.3 MB/s 7.48s, 42.1 MB/s 7.43s, 42.4 MB/s
3 7.38s, 42.6 MB/s 7.45s, 42.2 MB/s 7.41s, 42.5 MB/s
So the overhead of tracing is very small, and no regression when using
those trace events vs blktrace.
And the binary output of TRACE_EVENT is much smaller than blktrace:
# ls -l -h
-rw-r--r-- 1 root root 8.8M 06-09 13:24 sda.blktrace.0
-rw-r--r-- 1 root root 195K 06-09 13:24 sda.blktrace.1
-rw-r--r-- 1 root root 2.7M 06-09 13:25 trace_splice.out
Following are some comparisons between TRACE_EVENT and blktrace:
plug:
kjournald-480 [000] 303.084981: block_plug: [kjournald]
kjournald-480 [000] 303.084981: 8,0 P N [kjournald]
unplug_io:
kblockd/0-118 [000] 300.052973: block_unplug_io: [kblockd/0] 1
kblockd/0-118 [000] 300.052974: 8,0 U N [kblockd/0] 1
remap:
kjournald-480 [000] 303.085042: block_remap: 8,0 W 102736992 + 8 <- (8,8) 33384
kjournald-480 [000] 303.085043: 8,0 A W 102736992 + 8 <- (8,8) 33384
bio_backmerge:
kjournald-480 [000] 303.085086: block_bio_backmerge: 8,0 W 102737032 + 8 [kjournald]
kjournald-480 [000] 303.085086: 8,0 M W 102737032 + 8 [kjournald]
getrq:
kjournald-480 [000] 303.084974: block_getrq: 8,0 W 102736984 + 8 [kjournald]
kjournald-480 [000] 303.084975: 8,0 G W 102736984 + 8 [kjournald]
bash-2066 [001] 1072.953770: 8,0 G N [bash]
bash-2066 [001] 1072.953773: block_getrq: 0,0 N 0 + 0 [bash]
rq_complete:
konsole-2065 [001] 300.053184: block_rq_complete: 8,0 W () 103669040 + 16 [0]
konsole-2065 [001] 300.053191: 8,0 C W 103669040 + 16 [0]
ksoftirqd/1-7 [001] 1072.953811: 8,0 C N (5a 00 08 00 00 00 00 00 24 00) [0]
ksoftirqd/1-7 [001] 1072.953813: block_rq_complete: 0,0 N (5a 00 08 00 00 00 00 00 24 00) 0 + 0 [0]
rq_insert:
kjournald-480 [000] 303.084985: block_rq_insert: 8,0 W 0 () 102736984 + 8 [kjournald]
kjournald-480 [000] 303.084986: 8,0 I W 102736984 + 8 [kjournald]
Changelog from v2 -> v3:
- use the newly introduced __dynamic_array().
Changelog from v1 -> v2:
- use __string() instead of __array() to minimize the memory required
to store hex dump of rq->cmd().
- support large pc requests.
- add missing blk_fill_rwbs_rq() in block_rq_requeue TRACE_EVENT.
- some cleanups.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4A2DF669.5070905@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The update of ret got mistakenly added to the if statement of
rb_try_to_discard. The variable ret should be 1 on commit and zero
otherwise.
[ Impact: fix compiler warning and real bug ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
On Sun, 7 Jun 2009, Ingo Molnar wrote:
> Testing tracer sched_switch: <6>Starting ring buffer hammer
> PASSED
> Testing tracer sysprof: PASSED
> Testing tracer function: PASSED
> Testing tracer irqsoff:
> =============================================
> PASSED
> Testing tracer preemptoff: PASSED
> Testing tracer preemptirqsoff: [ INFO: possible recursive locking detected ]
> PASSED
> Testing tracer branch: 2.6.30-rc8-tip-01972-ge5b9078-dirty #5760
> ---------------------------------------------
> rb_consumer/431 is trying to acquire lock:
> (&cpu_buffer->reader_lock){......}, at: [<c109eef7>] ring_buffer_reset_cpu+0x37/0x70
>
> but task is already holding lock:
> (&cpu_buffer->reader_lock){......}, at: [<c10a019e>] ring_buffer_consume+0x7e/0xc0
>
> other info that might help us debug this:
> 1 lock held by rb_consumer/431:
> #0: (&cpu_buffer->reader_lock){......}, at: [<c10a019e>] ring_buffer_consume+0x7e/0xc0
The ring buffer is a generic structure, and can be used outside of
ftrace. If ftrace traces within the use of the ring buffer, it can produce
false positives with lockdep.
This patch passes in a static lock key into the allocation of the ring
buffer, so that different ring buffers will have their own lock class.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1244477919.13761.9042.camel@twins>
[ store key in ring buffer descriptor ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The current method of printing out a stack trace is to add a new line
and print out the trace:
yum-updatesd-3120 [002] 573.691303:
=> do_softirq
=> irq_exit
=> smp_apic_timer_interrupt
=> apic_timer_interrupt
This looks a bit awkward, and if we have both stack and user stack traces
running, it would be nice to have a title to tell them apart, although
it is easy to tell by the output.
This patch adds an annotation to the start of the stack traces:
init-1 [003] 929.304979: <stack trace>
=> user_path_at
=> vfs_fstatat
=> vfs_stat
=> sys_newstat
=> system_call_fastpath
cat-3459 [002] 1016.824040: <user stack trace>
=> <0000003aae6c0250>
=> <00007ffff4b06ae4>
=> <69636172742f6775>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Here is an updated patch to include the extra call to
trace_seq_init() as requested. This is vs. the latest
-tip tree and fixes the use of multiple __print_flags
and __print_symbolic in a single tracer. Also tested
to ensure its working now:
mount.gfs2-2534 [000] 235.850587: gfs2_glock_queue: 8.7 glock 1:2 dequeue PR
mount.gfs2-2534 [000] 235.850591: gfs2_demote_rq: 8.7 glock 1:0 demote EX to NL flags:DI
mount.gfs2-2534 [000] 235.850591: gfs2_glock_queue: 8.7 glock 1:0 dequeue EX
glock_workqueue-2529 [000] 235.850666: gfs2_glock_state_change: 8.7 glock 1:0 state EX => NL tgt:NL dmt:NL flags:lDpI
glock_workqueue-2529 [000] 235.850672: gfs2_glock_put: 8.7 glock 1:0 state NL => IV flags:I
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
LKML-Reference: <1244037123.29604.603.camel@localhost.localdomain>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
According to "events/ftrace/user_stack/format", fix the output of
user stack.
before fix:
sh-1073 [000] 31.137561: <b7f274fe> <- <0804e33c> <- <080835c1>
after fix:
sh-1072 [000] 37.039329:
=> <b7f8a4fe>
=> <0804e33c>
=> <080835c1>
Signed-off-by: walimis <walimisdev@gmail.com>
LKML-Reference: <1244016090-7814-3-git-send-email-walimisdev@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
According to "events/ftrace/kernel_stack/format", output format of
kernel stack should use "=>" instead of "<=".
The second problem is that we shouldn't skip the first entry in the stack,
although it seems to be duplicated when used in the "function" tracer,
but events also use it. If we skip the first one, we will drop the topmost
entry of the stack.
The last problem is that if the last entry is ULONG_MAX(0xffffffff), we should
drop it, otherwise it will print a NULL name line.
before fix:
sh-1072 [000] 26.957239: sched_process_fork: parent sh:1072 child sh:1073
sh-1072 [000] 26.957262:
<= syscall_call
<=
sh-1072 [000] 26.957744: sched_switch: task sh:1072 [120] (R) ==> sh:1073 [120]
sh-1072 [000] 26.957752:
<= preempt_schedule
<= wake_up_new_task
<= do_fork
<= sys_clone
<= syscall_call
<=
After fix:
sh-1075 [000] 39.791848: sched_process_fork: parent sh:1075 child sh:1076
sh-1075 [000] 39.791871:
=> sys_clone
=> syscall_call
sh-1075 [000] 39.792713: sched_switch: task sh:1075 [120] (R) ==> sh:1076 [120]
sh-1075 [000] 39.792722:
=> schedule
=> preempt_schedule
=> wake_up_new_task
=> do_fork
=> sys_clone
=> syscall_call
Signed-off-by: walimis <walimisdev@gmail.com>
LKML-Reference: <1244016090-7814-2-git-send-email-walimisdev@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The last entry in the stack_dump_trace is ULONG_MAX, which is not
a valid entry, but max_stack_trace.nr_entries has accounted for it.
So when printing the header, we should decrease it by one.
Before fix, print as following, for example:
Depth Size Location (53 entries) <--- should be 52
----- ---- --------
0) 3264 108 update_wall_time+0x4d5/0x9a0
...
51) 80 80 syscall_call+0x7/0xb
^^^
it's correct.
Signed-off-by: walimis <walimisdev@gmail.com>
LKML-Reference: <1244016090-7814-1-git-send-email-walimisdev@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Every buffer page in the ring buffer includes its own time stamp.
When an event is recorded to the ring buffer with a delta time greater
than what can be held in the event header, a time stamp event is created.
If the the create timestamp falls over to the next buffer page, it is
redundant because the buffer page holds a full time stamp. This patch
will try to discard the time stamp when it falls to the start of the
next page.
This change also fixes a issues with disarding events. If most events are
discarded, timestamps will start to creep into the ring buffer. If we
do not discard the timestamps then they can fill up the ring buffer over
time and waste space.
This change will keep time stamps from filling up over another page. If
something is recorded in the buffer page, and the rest is filtered, then
the time stamps can only fill up to the end of the page.
[ Impact: prevent time stamps from filling ring buffer ]
Reported-by: Tim Bird <tim.bird@am.sony.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There are times that a race may happen that we add a timestamp in a
nested write. This timestamp would just contain a zero delta and serves
no purpose.
Now that we have a way to discard events, this patch will try to discard
the timestamp instead of just wasting the space in the ring buffer.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There's a bug in ring_buffer_discard_commit. The wrong
pointer is being compared in order to check if the event
can be freed from the buffer rather than discarded
(i.e. marked as PAD).
I noticed this when I was working on duration filtering.
The bug is not deadly - it just results in lots of wasted
space in the buffer. All filtered events are left in
the buffer and marked as discarded, rather than being
removed from the buffer to make space for other events.
Unfortunately, when I fixed this bug, I got errors doing a
filtered function trace. Multiple TIME_EXTEND
events pile up in the buffer, and trigger the
following loop overage warning in rb_iter_peek():
again:
...
if (RB_WARN_ON(cpu_buffer, ++nr_loops > 10))
return NULL;
I'm not sure what the best way is to fix this. I don't
know if I should extend the loop threshhold, or if I should
make the test more complex (ignore TIME_EXTEND
events), or just get rid of this loop check completely.
Note that if I implement a workaround for this, then I
see another problem from rb_advance_iter(). I haven't
tracked that one down yet.
In general, it seems like the case of removing filtered
events has not been working properly, and so some assumptions
about buffer invariant conditions need to be revisited.
Here's the patch for the simple fix:
Compare correct pointer for checking if an event can be
freed rather than left as discarded in the buffer.
Signed-off-by: Tim Bird <tim.bird@am.sony.com>
LKML-Reference: <4A25BE9E.5090909@am.sony.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
On creating a new task while running the function graph tracer, if
we fail to allocate the ret_stack, and then fail the fork, the
code will free the parent ret_stack. This is because the child
duplicated the parent and currently points to the parent's ret_stack.
This patch always initializes the task's ret_stack to NULL.
[ Impact: prevent crash of parent on low memory during fork ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The code that handles the tasks ret_stack allocation for every task
assumes that only an interrupt can cause issues (even though interrupts
are disabled).
In reality, the code is allocating the ret_stack for tasks that may be
running on other CPUs and there are not efficient memory barriers to
handle this case.
[ Impact: prevent crash due to using of uninitialized ret_stack variables ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The function graph tracer checks if the task_struct has ret_stack defined
to know if it is OK or not to use it. The initialization is done for
all tasks by one process, but the idle tasks use the same initialization
used by new tasks.
If an interrupt happens on an idle task that just had the ret_stack
created, but before the rest of the initialization took place, then
we can corrupt the return address of the functions.
This patch moves the setting of the task_struct's ret_stack to after
the other variables have been initialized.
[ Impact: prevent kernel panic on idle task when starting function graph ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When the function graph tracer is enabled, it calls the initialization
needed for the init tasks that would be called on all created tasks.
The problem is that this is called every time the function graph tracer
is enabled, and the ret_stack is allocated for the idle tasks each time.
Thus, the old ret_stack is lost and a memory leak is created.
This is also dangerous because if an interrupt happened on another CPU
with the init task and the ret_stack is replaced, we then lose all the
return pointers for the interrupt, and a crash would take place.
[ Impact: fix memory leak and possible crash due to race ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
A race was found that if one were to enable and disable the function
profiler repeatedly, then the system can panic. This was because a profiled
function may be preempted just before disabling interrupts. While
the profiler is disabled and then reenabled, the preempted function
could start again, and access the hash as it is being initialized.
This just adds a check in the irq disabled part to check if the profiler
is enabled, and if it is not then it will just exit.
When the system is disabled, the profile_enabled variable is cleared
before calling the unregistering of the function profiler. This
unregistering calls stop machine which also acts as a synchronize schedule.
[ Impact: fix panic in enabling/disabling function profiler ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The trace_pipe did not recognize the latency format flag and would produce
different output than the trace file. The problem was partly due that
the trace flags in the iterator was not set as well as the trace_pipe
zeros out part of the iterator (including the flags) to be able to use
the same routines as the trace file. trace_flags of the iterator should
not cause any problems when not zeroed out by for trace_pipe.
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
A patch to allow the use of __print_symbolic and __print_flags
from a module. This allows the current GFS2 tracing patch to
build.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
LKML-Reference: <1243868015.29604.542.camel@localhost.localdomain>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
__string() is limited:
- it's a char array, but we may want to define array with other types
- a source string should be available, but we may just know the string size
We introduce __dynamic_array() to break those limitations, and __string()
becomes a wrapper of it. As a side effect, now __get_str() can be used
in TP_fast_assign but not only TP_print.
Take XFS for example, we have the string length in the dirent, but the
string itself is not NULL-terminated, so __dynamic_array() can be used:
TRACE_EVENT(xfs_dir2,
TP_PROTO(struct xfs_da_args *args),
TP_ARGS(args),
TP_STRUCT__entry(
__field(int, namelen)
__dynamic_array(char, name, args->namelen + 1)
...
),
TP_fast_assign(
char *name = __get_str(name);
if (args->namelen)
memcpy(name, args->name, args->namelen);
name[args->namelen] = '\0';
__entry->namelen = args->namelen;
),
TP_printk("name %.*s namelen %d",
__entry->namelen ? __get_str(name) : NULL
__entry->namelen)
);
[ Impact: allow defining dynamic size arrays ]
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4A2384D2.3080403@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Both event tracer and sched switch plugin are selected by default
by all generic tracers. But if no generic tracer is enabled, their options
appear. But ether one of them will select the other, thus it only
makes sense to have the default tracers be selected by one option.
[ Impact: clean up kconfig menu ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There are two options that are selected by all tracers, but we want
to have those options available when no tracer is selected. These are
The event tracer and sched switch tracer.
The are enabled by all tracers, but if a tracer is not selected we want
the options to appear. All tracers including them select TRACING.
Thus what we would like to do is:
config EVENT_TRACER
bool "prompt"
depends on TRACING
select TRACING
But that gives us a bug in the kbuild system since we just created a
circular dependency. We only want the prompt to show when TRACING is off.
This patch adds GENERIC_TRACER that all tracers will select instead of
TRACING. The two options (sched switch and event tracer) will select
TRACING directly and depend on !GENERIC_TRACER. This solves the cicular
dependency.
[ Impact: hide options that are selected by default ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When using ftrace=function on the command line to trace functions
on boot up, one can not filter out functions that are commonly called.
This patch adds two new ftrace command line commands.
ftrace_notrace=function-list
ftrace_filter=function-list
Where function-list is a comma separated list of functions to filter.
The ftrace_notrace will make the functions listed not be included
in the function tracing, and ftrace_filter will only trace the functions
listed.
These two act the same as the debugfs/tracing/set_ftrace_notrace and
debugfs/tracing/set_ftrace_filter respectively.
The simple glob expressions that are allowed by the filter files can also
be used by the command line interface.
ftrace_notrace=rcu*,*lock,*spin*
Will not trace any function that starts with rcu, ends with lock, or has
the word spin in it.
Note, if the self tests are enabled, they may interfere with the filtering
set by the command lines.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
register_stat_tracer() uses list_for_each_entry_safe
to check whether a tracer is already present in the list.
But we don't delete anything from the list here, so
we don't need the safe version
[ Impact: cleanup list use is stat tracing ]
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
- remove duplicate code in stat_seq_init()
- update comments to reflect the change from stat list to stat rbtree
[ Impact: clean up ]
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
When closing a trace_stat file, we destroy the rbtree constructed during
file open, but there is memory leak that the root node is not freed.
[ Impact: fix memory leak when closing a trace_stat file ]
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Currently the output of trace_stat/workqueues is totally reversed:
# cat /debug/tracing/trace_stat/workqueues
...
1 17 17 210 37 `-blk_unplug_work+0x0/0x57
1 3779 3779 181 11 |-cfq_kick_queue+0x0/0x2f
1 3796 3796 kblockd/1:120
...
The correct output should be:
1 3796 3796 kblockd/1:120
1 3779 3779 181 11 |-cfq_kick_queue+0x0/0x2f
1 17 17 210 37 `-blk_unplug_work+0x0/0x57
It's caused by "tracing/stat: replace linked list by an rbtree for
sorting"
(53059c9b67a62a3dc8c80204d3da42b9267ea5a0).
dummpy_cmp() should return -1, so rb_node will always be inserted as
right-most node in the rbtree, thus we sort the output in ascending
order.
[ Impact: fix the output of trace_stat/workqueues ]
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
When the stat tracing framework prepares the entries from a tracer
to output them to the user, it starts by computing a linear sort
through a linked list to give the entries ordered by relevance
to the user.
This is quite ugly and causes a small latency when we begin to
read the file.
This patch changes that by turning the linked list into a red-black
tree. Athough the whole iteration using the start and next tracer
callbacks while opening the file remain the same, it is now much
more fast and scalable.
The rbtree guarantees O(log(n)) insertions whereas a linked
list with linear sorting brought us a O(n) despair. Now the
(visible) latency has disapeared.
[ Impact: kill the latency while starting to read a stat tracer file ]
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
The "trace" prefix in struct trace_stat_session type is annoying while
reading the trace_stat.c file. It makes the lines longer, and
is not that much useful to explain the sense of this type.
Just keep "struct stat_session" for this type.
[ Impact: make the code a bit more readable ]
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
The blankline between each cpu's workqueue stat is not necessary, because
the cpu number is enough to part them by eye.
Old style also caused a blankline below headline, and made code complex
by using lock, disableirq and get cpu var.
Old style:
# CPU INSERTED EXECUTED NAME
# | | | |
0 8644 8644 events/0
0 0 0 cpuset
...
0 1 1 kdmflush
1 35365 35365 events/1
...
New style:
# CPU INSERTED EXECUTED NAME
# | | | |
0 8644 8644 events/0
0 0 0 cpuset
...
0 1 1 kdmflush
1 35365 35365 events/1
...
[ Impact: provide more readable code ]
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
cpu_workqueue_stats->first_entry is useless because we can retrieve the
header of a cpu workqueue using:
if (&cpu_workqueue_stats->list == workqueue_cpu_stat(cpu)->list.next)
[ Impact: cleanup ]
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
No need to use list_for_each_entry_safe() in iteration without deleting
any node, we can use list_for_each_entry() instead.
[ Impact: cleanup ]
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
v3: zhaolei@cn.fujitsu.com: Change TRACE_EVENT definition to new format
introduced by Steven Rostedt: consolidate trace and trace_event headers
v2: kosaki@jp.fujitsu.com: print the function names instead of addr, and zap
the work addr
v1: zhaolei@cn.fujitsu.com: Make workqueue tracepoints use TRACE_EVENT macro
TRACE_EVENT is a more generic way to define tracepoints.
Doing so adds these new capabilities to the tracepoints:
- zero-copy and per-cpu splice() tracing
- binary tracing without printf overhead
- structured logging records exposed under /debug/tracing/events
- trace events embedded in function tracer output and other plugins
- user-defined, per tracepoint filter expressions
Then, this patch converts DEFINE_TRACE to TRACE_EVENT in workqueue related
tracepoints.
[ Impact: expand workqueue tracer to events tracing ]
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
This patch adds __print_symbolic which is similar to __print_flags but
works for an enumeration type instead. That is, there is only a one to one
mapping between the values and the symbols. When a match is made, then
it is printed, otherwise the hex value is outputed.
[ Impact: add interface for showing symbol names in events ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Developers have been asking for the ability in the ftrace event tracer
to display names of bits in a flags variable.
Instead of printing out c2, it would be easier to read FOO|BAR|GOO,
assuming that FOO is bit 1, BAR is bit 6 and GOO is bit 7.
Some examples where this would be useful are the state flags in a context
switch, kmalloc flags, and even permision flags in accessing files.
[
v2 changes include:
Frederic Weisbecker's idea of using a mask instead of bits,
thus we can output GFP_KERNEL instead of GPF_WAIT|GFP_IO|GFP_FS.
Li Zefan's idea of allowing the caller of __print_flags to add their
own delimiter (or no delimiter) where we can get for file permissions
rwx instead of r|w|x.
]
[
v3 changes:
Christoph Hellwig's idea of using an array instead of va_args.
]
[ Impact: better displaying of flags in trace output ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Always use ftrace_event_enable_disable() to enable/disable an event
so that we can factorize out the event toggling code.
[ Impact: factorize and cleanup event tracing code ]
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <4A14FDFE.2080402@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
I found that there is nothing to protect event_hash in
ftrace_find_event(). Rcu protects the event hashlist
but not the event itself while we use it after its extraction
through ftrace_find_event().
This lack of a proper locking in this spot opens a race
window between any event dereferencing and module removal.
Eg:
--Task A--
print_trace_line(trace) {
event = find_ftrace_event(trace)
--Task B--
trace_module_remove_events(mod) {
list_trace_events_module(ev, mod) {
unregister_ftrace_event(ev->event) {
hlist_del(ev->event->node)
list_del(....)
}
}
}
|--> module removed, the event has been dropped
--Task A--
event->print(trace); // Dereferencing freed memory
If the event retrieved belongs to a module and this module
is concurrently removed, we may end up dereferencing a data
from a freed module.
RCU could solve this, but it would add latency to the kernel and
forbid tracers output callbacks to call any sleepable code.
So this fix converts 'trace_event_mutex' to a read/write semaphore,
and adds trace_event_read_lock() to protect ftrace_find_event().
[ Impact: fix possible freed memory dereference in ftrace ]
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <4A114806.7090302@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
register_module_notifier() returns zero in the success case.
So fix the inverted fail case check in trace events modules
handler.
[ Impact: fix spurious warning on ftrace initialization]
Reported-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
debugfs directory entries for devices are not removed on some
of the failure pathes in do_blk_trace_setup().
One way to reproduce is to start blktrace on multiple devices
with insufficient Vmalloc space: Devices will fail with
a message like this:
BLKTRACESETUP(2) /dev/sdu failed: 5/Input/output error
If so, the respective entries in debugfs
(e.g. /sys/kernel/debug/block/sdu) will remain and subsequent
attempts to start blktrace on the respective devices will not
succeed due to existing directories.
[ Impact: fix /debug/tracing file cleanup corner case ]
Signed-off-by: Stefan Raspl <stefan.raspl@linux.vnet.ibm.com>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: schwidefsky@de.ibm.com
Cc: heiko.carstens@de.ibm.com
LKML-Reference: <4A1266CC.5040801@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
return zero should be correct, so fix it.
[ Impact: eliminate incorrect syslog message ]
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: rostedt@goodmis.org
LKML-Reference: <1242545498-7285-1-git-send-email-tom.leiming@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
