Rename ATA_DFLAG_NCQ_PRIO_ENABLE to ATA_DFLAG_NCQ_PRIO_ENABLED to match
the fact that this flags indicates if NCQ priority use is enabled by the
user.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Return value from ata_exec_internal() directly instead of
taking this in another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Jinpeng Cui <cui.jinpeng2@zte.com.cn>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
ata_dev_set_feature() is currently used for enabling/disabling any ATA
feature, e.g. SETFEATURES_SPINUP and SETFEATURE_SENSE_DATA, i.e. it is
not only used to enable/disable SATA specific features.
For most features, the enable/disable bit is specified in the subcommand
specific field "count".
It is only for the specific subcommands "Enable SATA feature" (0x10) and
"Disable SATA feature" (0x90) where the field "count" is used to specify
a feature instead of enable/disable. The parameter names for this
function are thus quite misleading.
Rename the parameter names to be more generic and in line with ACS-5,
and remove the references to "SATA FEATURES" in the kernel-doc.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Printing the timeout value may help in troubleshooting failures.
Signed-off-by: David Milburn <dmilburn@redhat.com>
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Make the 'timeout' parameter to ata_exec_internal_sg() *unsigned int* as
msecs_to_jiffies() that it calls takes just *unsigned int* for the time in
milliseconds. Then follow the suit with ata_exec_internal(), its only
caller; also fix up ata_dev_set_feature(), the only ata_exec_internal()'s
caller that explicitly passes *unsigned long* variable for timeout...
Found by Linux Verification Center (linuxtesting.org) with the SVACE static
analysis tool.
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
ata_exec_internal_sg() is only called by ata_exec_internal() further in
the same file, so we can make it *static* and remove its prototype from
drivers/ata/libata.h...
Suggested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
The packed transfer mode masks and also the {pio|mwdma|udma}_mask fields
of *struct*s ata_device and ata_port_info are declared as *unsigned long*
(which is a 64-bit type on 64-bit architectures) but actually the packed
masks occupy only 20 bits (7 PIO modes, 5 MWDMA modes, and 8 UDMA modes)
and the PIO/MWDMA/UDMA masks easily fit into just 8 bits each, so we can
safely use (always 32-bit) *unsigned int* variables instead. This saves
745 bytes of object code in libata-core.o alone, not to mention LLDDs...
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Using *else* after *return* doesn't make much sense -- getting rid of such
*else* branches reduces the indentation levels and thus reduces # of LoC...
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
The code multiplying the # of cylinders/heads/sectors in ata_id_n_sectors()
to get a disk capacity implicitly uses the *int* type for that calculation
and casting the result to 'u64' before returning ensues a sign extension.
Explicitly casting the 'u16' typed multipliers to 'u32' results in avoiding
a sign extension instruction and so in a more compact code...
Found by Linux Verification Center (linuxtesting.org) with the SVACE static
analysis tool.
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
The concurrent positioning ranges log is not a fixed size and may depend
on how many ranges are supported by the device. This patch uses the size
reported in the GPL directory to determine the number of pages supported
by the device before attempting to read this log page.
This resolves this error from the dmesg output:
ata6.00: Read log 0x47 page 0x00 failed, Emask 0x1
Cc: stable@vger.kernel.org
Fixes: fe22e1c2f7 ("libata: support concurrent positioning ranges log")
Signed-off-by: Tyler Erickson <tyler.erickson@seagate.com>
Reviewed-by: Muhammad Ahmad <muhammad.ahmad@seagate.com>
Tested-by: Michael English <michael.english@seagate.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
In an unlikely (and probably wrong?) case that the 'ppi' parameter of
ata_host_alloc_pinfo() points to an array starting with a NULL pointer,
there's going to be a kernel oops as the 'pi' local variable won't get
reassigned from the initial value of NULL. Initialize 'pi' instead to
'&ata_dummy_port_info' to fix the possible kernel oops for good...
Found by Linux Verification Center (linuxtesting.org) with the SVACE static
analysis tool.
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
To facilitate debugging of drive issues in the field without kernel
changes (e.g. temporary test patches), add an entry for most horkage
flags in the force_tbl array to allow controlling these horkage
settings with the libata.force kernel boot parameter.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Similarly to the horkage flags, introduce the force_lflag_onoff() macro
to define struct ata_force_param entries of the force_tbl array that
allow turning on or off a link flag using the libata.force boot
parameter. To be consistent with naming, the macro force_lflag() is
renamed to force_lflag_on().
Using force_lflag_onoff(), define a new force_tbl entry for the
ATA_LFLAG_NO_DEBOUNCE_DELAY link flag, thus allowing testing if an
adapter requires a link debounce delay or not.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Introduce the macro definitions force_cbl(), force_spd_limit(),
force_xfer(), force_lflag(), force_horkage_on() and
force_horkage_onoff() to define with a more compact syntax the struct
ata_force_param entries in the force_tbl array defined in the function
ata_parse_force_one().
To reduce the indentation of the array declaration, force_tbl definition
is also moved out of the ata_parse_force_one() function. The entries are
also reordered to group them by type of the quirck that is applied.
Finally, fix a comment in ata_parse_force_param() incorrectly
referencing force_tbl instead of ata_force_tbl.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Remove the unneeded comma after the last field of the array entries.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Hannes Reinecke <hare@suse.de>
and "isn't" with "is not". The former fixes the typo while the latter
just uses the same formal language.
Signed-off-by: Diego Viola <diego.viola@gmail.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
The data transfer mode that corresponds to the 'xfer_mode' parameter for
ata_xfer_mode2shift() is a 8-bit *unsigned* value. Using *unsigned long*
to declare the parameter leads to a problematic implicit *int* to *unsigned
long* cast and was most probably a result of a copy/paste mistake -- use
the 'u8' type instead, as in ata_xfer_mode2mask()...
Found by Linux Verification Center (linuxtesting.org) with the SVACE static
analysis tool.
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Improve ATA queued command allocation as follows:
- For attaining a qc tag for a SAS host we need to allocate a bit in
ata_port.sas_tag_allocated bitmap.
However we already have a unique tag per device in range
[0, ATA_MAX_QUEUE -1] in the scsi cmnd budget token, so just use that
instead.
- It is a bit pointless to have ata_qc_new_init() in libata-core.c since it
pokes scsi internals, so inline it in ata_scsi_qc_new() (in
libata-scsi.c). Also update Doc accordingly.
- Use standard SCSI helpers set_host_byte() and set_status_byte() in
ata_scsi_qc_new().
Christoph Hellwig originally contributed the change to inline
ata_qc_new_init().
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Samsung' 840 EVO with the latest firmware (EXT0DB6Q) locks up with
the a message: "READ LOG DMA EXT failed, trying PIO" during boot.
Initially this was discovered because it caused a crash
with the sata_dwc_460ex controller on a WD MyBook Live DUO.
The reporter "Tice Rex" which has the unique opportunity that he
has two Samsung 840 EVO SSD! One with the older firmware "EXT0BB0Q"
which booted fine and didn't expose "READ LOG DMA EXT". But the
newer/latest firmware "EXT0DB6Q" caused the headaches.
BugLink: https://github.com/openwrt/openwrt/issues/9505
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
For this cycle, no big change but many small fixes and code cleanup to
libata, the ahci driver and various pata drivers. In more details:
* Code simplification in pata_platform using platform_get_mem_or_io(),
from Lad.
* Fix read-only arrays declarations as const in pata_atiixp and
pata_pdc202xx_old, from Colin.
* Various cleanups and code simplification in libata-scsi, from me.
* Remove dead code in libata-acpi, from Sergey.
* Skip device scan deboune delay for Marvell 88SE9235 adapters (ahci) to
speedup boot, from Paul.
* Simplify functions declaration and use for functions always returning
0 in libata-core, from Sergey.
* Non-fatal error fixes and in the pata_hpt366 and pata_hpt3x2n drivers,
from Sergey.
* Various code cleanup in the pata_artop, pata_hpt37x, pata_hpt366,
pata_hpt3x2n, pata_samsung_cf and sata_rcar drivers, from Sergey.
* Some libata-sff and libata-scsi code cleanup (e.g. change functions
to return "bool"), from Sergey.
* Renae ahci_board_mobile to board_ahci_low_power to be more descriptive
of the feature as that is also used on PC and server AHCI adapters,
from Mario.
* Cleanup of OF match tables, from Geert.
* Simplify the pata_pxa driver initialization using platform_get_irq(),
from Minghao.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCYjlsYwAKCRDdoc3SxdoY
dn35AP43C5aPtM1JDd+uGZ6JC5QsFPsHYtsX3S7UsO5QhtFeXgD/d+XVYt+pD7wk
WEaUpH9bB0jRuEFp9yISZeqJzxeuzw8=
=nxBY
-----END PGP SIGNATURE-----
Merge tag 'ata-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ata updates from Damien Le Moal:
"For this cycle, no big change but many small fixes and code cleanup to
libata, the ahci driver and various pata drivers. In more details:
- Code simplification in pata_platform using
platform_get_mem_or_io(), from Lad.
- Fix read-only arrays declarations as const in pata_atiixp and
pata_pdc202xx_old, from Colin.
- Various cleanups and code simplification in libata-scsi, from me.
- Remove dead code in libata-acpi, from Sergey.
- Skip device scan deboune delay for Marvell 88SE9235 adapters (ahci)
to speedup boot, from Paul.
- Simplify functions declaration and use for functions always
returning 0 in libata-core, from Sergey.
- Non-fatal error fixes and in the pata_hpt366 and pata_hpt3x2n
drivers, from Sergey.
- Various code cleanup in the pata_artop, pata_hpt37x, pata_hpt366,
pata_hpt3x2n, pata_samsung_cf and sata_rcar drivers, from Sergey.
- Some libata-sff and libata-scsi code cleanup (e.g. change functions
to return "bool"), from Sergey.
- Renae ahci_board_mobile to board_ahci_low_power to be more
descriptive of the feature as that is also used on PC and server
AHCI adapters, from Mario.
- Cleanup of OF match tables, from Geert.
- Simplify the pata_pxa driver initialization using
platform_get_irq(), from Minghao"
* tag 'ata-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: (38 commits)
ata: pata_pxa: Use platform_get_irq() to get the interrupt
ata: Drop commas after OF match table sentinels
ata: ahci: Rename CONFIG_SATA_LPM_MOBILE_POLICY configuration item
ata: ahci: Rename `AHCI_HFLAG_IS_MOBILE`
ata: ahci: Rename board_ahci_mobile
ata: pata_hpt37x: merge transfer mode setting methods
ata: libata-sff: use *switch* statement in ata_sff_dev_classify()
ata: add/use ata_taskfile::{error|status} fields
ata: Kconfig: fix sata gemini compile test condition
ata: libata-scsi: use *switch* statements to check SCSI command codes
ata: libata-sff: refactor ata_sff_altstatus()
ata: libata-sff: refactor ata_sff_set_devctl()
ata: libata-sff: make ata_resources_present() return 'bool'
ata: pata_hpt3x2n: disable fast interrupts in prereset() method
ata: pata_hpt37x: disable fast interrupts in prereset() method
ata: pata_hpt366: disable fast interrupts in prereset() method
ata: pata_mpc52xx: use GFP_KERNEL
ata: sata_rcar: drop unused #define's
ata: pata_hpt366: check channel enable bits
ata: sata_rcar: make sata_rcar_ata_devchk() return 'bool'
...
Add the explicit error and status register fields to 'struct ata_taskfile'
using the anonymous *union*s ('struct ide_taskfile' had that for ages!) and
update the libata taskfile code accordingly. There should be no object code
changes resulting from that...
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
ata_host_suspend() always returns 0, so the result checks in many drivers
look pointless. Let's make this function return *void* instead of *int*.
Found by Linux Verification Center (linuxtesting.org) with the SVACE static
analysis tool.
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
This device is a CF card, or possibly an SSD in CF form factor.
It supports NCQ and high speed DMA.
While it also advertises TRIM support, I/O errors are reported
when the discard mount option fstrim is used. TRIM also fails
when disabling NCQ and not just as an NCQ command.
TRIM must be disabled for this device.
Signed-off-by: Zoltán Böszörményi <zboszor@gmail.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
The concurrent positioning ranges log page 47h is a general purpose log
page and not a subpage of the indentify device log. Using
ata_identify_page_supported() to test for concurrent positioning ranges
support is thus wrong. ata_log_supported() must be used.
Furthermore, unlike other advanced ATA features (e.g. NCQ priority),
accesses to the concurrent positioning ranges log page are not gated by
a feature bit from the device IDENTIFY data. Since many older drives
react badly to the READ LOG EXT and/or READ LOG DMA EXT commands isued
to read device log pages, avoid problems with older drives by limiting
the concurrent positioning ranges support detection to drives
implementing at least the ACS-4 ATA standard (major version 11). This
additional condition effectively turns ata_dev_config_cpr() into a nop
for older drives, avoiding problems in the field.
Fixes: fe22e1c2f7 ("libata: support concurrent positioning ranges log")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215519
Cc: stable@vger.kernel.org
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Abderraouf Adjal <adjal.arf@gmail.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
06f6c4c6c3 ("ata: libata: add missing ata_identify_page_supported() calls")
introduced additional calls to ata_identify_page_supported(), thus also
adding indirectly accesses to the device log directory log page through
ata_log_supported(). Reading this log page causes SATADOM-ML 3ME devices
to lock up.
Introduce the horkage flag ATA_HORKAGE_NO_LOG_DIR to prevent accesses to
the log directory in ata_log_supported() and add a blacklist entry
with this flag for "SATADOM-ML 3ME" devices.
Fixes: 636f6e2af4 ("libata: add horkage for missing Identify Device log")
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
ata_std_prereset() always returns 0, hence the check in ata_sff_prereset()
is pointless and thus it also can return only 0 (however, we cannot change
the prototypes of ata_{sff|std}_prereset() as they implement the driver's
prereset() method).
Found by Linux Verification Center (linuxtesting.org) with the SVACE static
analysis tool.
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Drivers that need to tweak a device IDENTIFY data implement the
read_id() port operation. The IDENTIFY data buffer is passed as an
argument to the read_id() operation for drivers to use. However, when
this operation is called, the IDENTIFY data is not yet converted to CPU
endian and contains le16 words.
Change the interface of the read_id operation to pass a __le16 * pointer
to the IDENTIFY data buffer to clarify the buffer endianness. Fix the
pata_netcell, pata_it821x, ahci_xgene, ahci_ceva and ahci_brcm drivers
implementation of this operation and modify the code to corretly deal
with identify data words manipulation to avoid sparse warnings such as:
drivers/ata/ahci_xgene.c:262:33: warning: invalid assignment: &=
drivers/ata/ahci_xgene.c:262:33: left side has type unsigned short
drivers/ata/ahci_xgene.c:262:33: right side has type restricted __le16
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Callers are already protected by ata_dev_print_info(), so no need
to have an additional configuration parameter here.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Convert the sole caller to ata_dev_dbg() and remove the definition.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
All callsites have been converted to dynamic debugging.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
The WARN level was always enabled, so drop ata_msg_warn().
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
The one caller have been converted to dynamic debugging.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Most of the information is already covered by tracepoints
(if not downright pointless), so remove the VPRINTK() calls.
And while we're at it, remove ata_scsi_dump_cdb(), too,
as this information can be retrieved from scsi tracing.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Replace all DPRINTK calls with ata_dev_dbg().
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Use standard pr_{debug,info,notice,warn,err} macros instead of the
hand-crafted printk helpers.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Add tracepoints for bus-master DMA and taskfile related functions.
That allows us to drop the relevant DPRINTK() calls.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Convert the existing ata_qc_issue() tracepoint into a template,
and add tracepoints for ata_qc_prep() and ata_qc_issue() based
on that template.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
To follow the flow of control we should be using tracepoints, as
they will tie in with the actual I/O flow and deliver a better
overview about what it happening.
This patch adds tracepoints for hard reset, soft reset, and postreset
and adds them in the libata-eh control flow.
With that we can drop the reset DPRINTK calls in the various drivers.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
With moving ata_dev_dbg() over to dynamic debugging ATA_HORKAGE_DUMP_ID
will now print out the raw IDENTIFY data without a header unless
explicitly enable via dyndebug.
So move the logging level up to INFO and have the header printed
always.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Use ata_dev_dbg() to print out the information in ata_dump_id()
and remove the ata_msg_probe() conditional.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Add an ata_port_classify() helper to print out the results from
the device classification and remove the debugging statements
from ata_dev_classify().
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Debugging messages in pci init functions or sg setup are pretty
much pointless, as the workflow pretty much decides what happened.
So drop them.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
The ASMedia 1092 has a configuration mode which will present a
dummy device; sadly the implementation falsely claims to provide
a device with 100M which doesn't actually exist.
So disable this device to avoid errors during boot.
Cc: stable@vger.kernel.org
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
ata_dev_config_ncq_prio() and ata_dev_config_devslp() both access pages
of the IDENTIFY DEVICE data log. Before calling ata_read_log_page(),
make sure to check for the existence of the IDENTIFY DEVICE data log and
of the log page accessed using ata_identify_page_supported(). This
avoids useless error messages from ata_read_log_page() and failures with
some LLDD scsi drivers using libsas.
Reported-by: Nikolay <knv418@gmail.com>
Cc: stable@kernel.org # 5.15
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Matthew Perkowski <mgperkow@gmail.com>
If ata_read_log_page() fails to read a log page, the ata_dev_err() error
message only print the page number, omitting the log number. In case of
error, facilitate debugging by also printing the log number.
Cc: stable@kernel.org # 5.15
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Matthew Perkowski <mgperkow@gmail.com>
ACS-3 introduced the ATA Identify Device Data log as mandatory. A
warning message currently signals to the user if a device does not
report supporting this log page in the log directory page, regardless
of the ATA version of the device. Furthermore, this warning will appear
for all attempts at accessing this missing log page during device
revalidation.
Since it is useless to constantly access the log directory and warn
about this lack of support once we have discovered that the device
does not support this log page, introduce the horkage flag
ATA_HORKAGE_NO_ID_DEV_LOG to mark a device as lacking support for
the Identify Device Data log page. Set this flag when
ata_log_supported() returns false in ata_identify_page_supported().
The warning is printed only if the device ATA level is 10 or above
(ACS-3 or above), and only once on device scan. With this flag set, the
log directory page is not accessed again to test for Identify Device
Data log page support.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Changes in libata for 5.16 include the following:
* Remove duplicated AHCI adapter PCI device IDs (from Krzysztof)
* Cleanup of device DMA state checking to consistantly use
ata_dma_enabled() (from Reimar)
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCYYDUiwAKCRDdoc3SxdoY
dgcUAP9G6Bf5Yar37Nd+2eoROAh01jkc4J2ez0p/pr+kDlp0MQD/f6Cfj1oFpoqn
kZXd3dIyf6uOtkJRXbyc1YLMzdr8Xw8=
=EaHo
-----END PGP SIGNATURE-----
Merge tag 'libata-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull libata updates from Damien Le Moal:
- Remove duplicated AHCI adapter PCI device IDs (from Krzysztof)
- Cleanup of device DMA state checking to consistantly use
ata_dma_enabled() (from Reimar)
* tag 'libata-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
pata_radisys: fix checking of DMA state
pata_optidma: fix checking of DMA state
pata_amd: fix checking of DMA state
pata_ali: fix checking of DMA state
libata-scsi: fix checking of DMA state
libata: fix checking of DMA state
Add AHCI support for ASM1062+JBM575 cards
ahci: remove duplicated PCI device IDs
Add support to discover if an ATA device supports the Concurrent
Positioning Ranges data log (address 0x47), indicating that the device
is capable of seeking to multiple different locations in parallel using
multiple actuators serving different LBA ranges.
Also add support to translate the concurrent positioning ranges log
into its equivalent Concurrent Positioning Ranges VPD page B9h in
libata-scsi.c.
The format of the Concurrent Positioning Ranges Log is defined in ACS-5
r9.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20211027022223.183838-4-damien.lemoal@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Checking if DMA is enabled should be done via the
ata_dma_enabled helper function, since the init state
0xff indicates disabled.
This meant that ATA_CMD_READ_LOG_DMA_EXT was used and probed
for before DMA was enabled, which caused hangs for some combinations
of controllers and devices.
It might also have caused it to be incorrectly disabled as broken,
but there have been no reports of that.
Cc: stable@vger.kernel.org
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=195895
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Many users are reporting that the Samsung 860 and 870 SSD are having
various issues when combined with AMD/ATI (vendor ID 0x1002) SATA
controllers and only completely disabling NCQ helps to avoid these
issues.
Always disabling NCQ for Samsung 860/870 SSDs regardless of the host
SATA adapter vendor will cause I/O performance degradation with well
behaved adapters. To limit the performance impact to ATI adapters,
introduce the ATA_HORKAGE_NO_NCQ_ON_ATI flag to force disable NCQ
only for these adapters.
Also, two libata.force parameters (noncqati and ncqati) are introduced
to disable and enable the NCQ for the system which equipped with ATI
SATA adapter and Samsung 860 and 870 SSDs. The user can determine NCQ
function to be enabled or disabled according to the demand.
After verifying the chipset from the user reports, the issue appears
on AMD/ATI SB7x0/SB8x0/SB9x0 SATA Controllers and does not appear on
recent AMD SATA adapters. The vendor ID of ATI should be 0x1002.
Therefore, ATA_HORKAGE_NO_NCQ_ON_AMD was modified to
ATA_HORKAGE_NO_NCQ_ON_ATI.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=201693
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210903094411.58749-1-hpa@redhat.com
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit ca6bfcb2f6 ("libata: Enable queued TRIM for Samsung SSD 860")
limited the existing ATA_HORKAGE_NO_NCQ_TRIM quirk from "Samsung SSD 8*",
covering all Samsung 800 series SSDs, to only apply to "Samsung SSD 840*"
and "Samsung SSD 850*" series based on information from Samsung.
But there is a large number of users which is still reporting issues
with the Samsung 860 and 870 SSDs combined with Intel, ASmedia or
Marvell SATA controllers and all reporters also report these problems
going away when disabling queued trims.
Note that with AMD SATA controllers users are reporting even worse
issues and only completely disabling NCQ helps there, this will be
addressed in a separate patch.
Fixes: ca6bfcb2f6 ("libata: Enable queued TRIM for Samsung SSD 860")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=203475
Cc: stable@vger.kernel.org
Cc: Kate Hsuan <hpa@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210823095220.30157-1-hdegoede@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Print a list of features supported by a drive when it is configured in
ata_dev_configure() using the new function ata_dev_print_features().
The features printed are not already advertized and are: trusted
send-recev support, device attention support, device sleep support,
NCQ send-recv support and NCQ priority support.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20210816014456.2191776-9-damien.lemoal@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Support for the READ LOG PAGE DMA EXT command is indicated by words 119
and 120 of a device identify data. This is tested in
ata_read_log_page() with ata_id_has_read_log_dma_ext() and the
READ LOG PAGE DMA command used if the device reports supports for it.
However, some devices lie about this support and using the DMA version
of the command fails, generating the warning message "READ LOG DMA EXT
failed, trying PIO". Since READ LOG PAGE DMA EXT is an optional command,
this warning is not at all important but may be scary for the user.
Change ata_read_log_page() to suppres this warning and to print an
error message if both DMA and PIO attempts failed.
With this change, there is no need to print again an error message when
ata_read_log_page() returns an error. So simplify the users of this
function.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20210816014456.2191776-8-damien.lemoal@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The ata device flag ATA_DFLAG_NCQ_PRIO indicates if a device supports
the NCQ Priority feature while the ATA_DFLAG_NCQ_PRIO_ENABLE device
flag indicates if the feature is enabled. Enabling NCQ priority use is
controlled by the user through the device sysfs attribute
ncq_prio_enable. As a result, the ATA_DFLAG_NCQ_PRIO flag should not be
cleared when ATA_DFLAG_NCQ_PRIO_ENABLE is not set as the device still
supports the feature even after the user disables it. This leads to the
following cleanups:
- In ata_build_rw_tf(), set a command high priority bit based on the
ATA_DFLAG_NCQ_PRIO_ENABLE flag, not on the ATA_DFLAG_NCQ flag. That
is, set a command high priority only if the user enabled NCQ priority
use.
- In ata_dev_config_ncq_prio(), ATA_DFLAG_NCQ_PRIO should not be cleared
if ATA_DFLAG_NCQ_PRIO_ENABLE is not set. If the device does not
support NCQ priority, both ATA_DFLAG_NCQ_PRIO and
ATA_DFLAG_NCQ_PRIO_ENABLE must be cleared.
With the above ata_dev_config_ncq_prio() change, ATA_DFLAG_NCQ_PRIO flag
is set on device scan and revalidation. There is no need to trigger a
device revalidation in ata_ncq_prio_enable_store() when the user enables
the use of NCQ priority. Remove the revalidation code from that funciton
to simplify it. Also change the return value from -EIO to -EINVAL when a
user tries to enable NCQ priority for a device that does not support
this feature. While at it, also simplify ata_ncq_prio_enable_show().
Overall, there is no functional change introduced by this patch.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20210816014456.2191776-7-damien.lemoal@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Introduce the helper functions ata_dev_config_lba() and
ata_dev_config_chs() to configure the addressing capabilities of a
device. To control message printing in these new helpers, as well as
in ata_dev_configure() and in ata_hpa_resize(), add the helper function
ata_dev_print_info() to avoid open coding for the eh context
ATA_EHI_PRINTINFO flag in multiple functions.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20210816014456.2191776-6-damien.lemoal@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the code to retrieve the device sleep capability and timings out of
ata_dev_configure() into the helper function ata_dev_config_devslp().
While at it, mark the device as supporting the device sleep capability
only if the sata settings page was retrieved successfully to ensure that
the timing information is correctly initialized.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20210816014456.2191776-5-damien.lemoal@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The loop on entry of ata_host_start() may not initialize host->ops to a
non NULL value. The test on the host_stop field of host->ops must then
be preceded by a check that host->ops is not NULL.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20210816014456.2191776-3-damien.lemoal@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Some functions have different names between their prototypes
and the kernel-doc markup.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
All three generations of Sandisk SSDs lock up hard intermittently.
Experiments showed that disabling NCQ lowered the failure rate significantly
and the kernel has been disabling NCQ for some models of SD7's and 8's,
which is obviously undesirable.
Karthik worked with Sandisk to root cause the hard lockups to trim commands
larger than 128M. This patch implements ATA_HORKAGE_MAX_TRIM_128M which
limits max trim size to 128M and applies it to all three generations of
Sandisk SSDs.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Karthik Shivaram <karthikgs@fb.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 130f4caf14 ("libata: Ensure ata_port probe has completed before
detach") may cause system freeze during suspend.
Using async_synchronize_full() in PM callbacks is wrong, since async
callbacks that are already scheduled may wait for not-yet-scheduled
callbacks, causes a circular dependency.
Instead of using big hammer like async_synchronize_full(), use async
cookie to make sure port probe are synced, without affecting other
scheduled PM callbacks.
Fixes: 130f4caf14 ("libata: Ensure ata_port probe has completed before detach")
Suggested-by: John Garry <john.garry@huawei.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: John Garry <john.garry@huawei.com>
BugLink: https://bugs.launchpad.net/bugs/1867983
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The docs toolchain doesn't recognise this pattern:
@link->[hw_]sata_spd_limit
As it can't really process it. So, instead, let's mark it with
a literal block markup:
``link->[hw_]sata_spd_limit``
in order to get rid of the following warning:
./drivers/ata/libata-core.c:5974: WARNING: Unknown target name: "hw".
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/9a21444df75c46095c4b1839d2061d19c9addcff.1586881715.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Start separating SATA specific code from libata-core.c:
* move following functions to libata-sata.c:
- ata_tf_to_fis()
- ata_tf_from_fis()
- sata_link_scr_lpm()
- ata_slave_link_init()
- sata_lpm_ignore_phy_events()
* group above functions together in <linux/libata.h>
* include libata-sata.c in the build when CONFIG_SATA_HOST=y
Code size savings on m68k arch using (modified) atari_defconfig:
text data bss dec hex filename
before:
37582 572 40 38194 9532 drivers/ata/libata-core.o
after:
36762 572 40 37374 91fe drivers/ata/libata-core.o
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add !IS_ENABLED(CONFIG_SATA_HOST) to ata_dev_config_ncq() to allow
compiler to optimize out the function for non-SATA configs.
Code size savings on m68k arch using (modified) atari_defconfig:
text data bss dec hex filename
before:
37582 572 40 38194 9532 drivers/ata/libata-core.o
after:
36462 572 40 37074 90d2 drivers/ata/libata-core.o
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Separate PATA timings code from libata-core.c:
* add PATA_TIMINGS config option and make corresponding PATA
host drivers (and ATA ACPI code) select it
* move following PATA timings code to libata-pata-timings.c:
- ata_timing_quantize()
- ata_timing_merge()
- ata_timing_find_mode()
- ata_timing_compute()
* group above functions together in <linux/libata.h>
* include libata-pata-timings.c in the build when PATA_TIMINGS
config option is enabled
* cover ata_timing_cycle2mode() with CONFIG_ATA_ACPI ifdef (it
depends on code from libata-core.c and libata-pata-timings.c
while its only user is ATA ACPI)
Code size savings on m68k arch using (modified) atari_defconfig:
text data bss dec hex filename
before:
39688 573 40 40301 9d6d drivers/ata/libata-core.o
after:
37820 572 40 38432 9620 drivers/ata/libata-core.o
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
* fix the overly long line in ata_timing_quantize()
* use standard kernel CodingStyle in ata_timing_merge()
* do not use assignment in if condition in ata_timing_compute()
* fix non-standard comment style in ata_timing_compute()
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move EXPORT_SYMBOL_GPL()s close to exported code like it is
done in other kernel subsystems. As a nice side effect this
results in the removal of few ifdefs.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Optimize struct ata_force_param size by:
- using u8 for cbl and spd_limit fields
- using u16 for lflags field
Code size savings on m68k arch using (modified) atari_defconfig:
text data bss dec hex filename
before:
41064 573 40 41677 a2cd drivers/ata/libata-core.o
after:
40654 573 40 41267 a133 drivers/ata/libata-core.o
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use COMMAND_LINE_SIZE instead PAGE_SIZE for ata_force_param_buf[]
size as libata parameters buffer doesn't need to be bigger than
the command line buffer.
For many architectures this results in decreased libata-core.o
size (COMMAND_LINE_SIZE varies from 256 to 4096 while the minimum
PAGE_SIZE is 4096).
Code size savings on m68k arch using (modified) atari_defconfig:
text data bss dec hex filename
before:
41064 4413 40 45517 b1cd drivers/ata/libata-core.o
after:
41064 573 40 41677 a2cd drivers/ata/libata-core.o
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In commit 7634ccd2da ("libata: maintainership update") from 2018
Jens has officially taken over libata maintainership from Tejun so
remove stale information from core libata code.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
device_shutdown() called from reboot or power_shutdown expect
all devices to be shutdown. Same is true for even ahci pci driver.
As no ahci shutdown function is implemented, the ata subsystem
always remains alive with DMA & interrupt support. File system
related calls should not be honored after device_shutdown().
So defining ahci pci driver shutdown to freeze hardware (mask
interrupt, stop DMA engine and free DMA resources).
Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
ata_qc_complete_multiple() is called with a mask of the still active
tags.
mv_sata doesn't have this information directly and instead calculates
the still active tags from the started tags (ap->qc_active) and the
finished tags as (ap->qc_active ^ done_mask)
Since 28361c4036 the hw_tag and tag are no longer the same and the
equation is no longer valid. In ata_exec_internal_sg() ap->qc_active is
initialized as 1ULL << ATA_TAG_INTERNAL, but in hardware tag 0 is
started and this will be in done_mask on completion. ap->qc_active ^
done_mask becomes 0x100000000 ^ 0x1 = 0x100000001 and thus tag 0 used as
the internal tag will never be reported as completed.
This is fixed by introducing ata_qc_get_active() which returns the
active hardware tags and calling it where appropriate.
This is tested on mv_sata, but sata_fsl and sata_nv suffer from the same
problem. There is another case in sata_nv that most likely needs fixing
as well, but this looks a little different, so I wasn't confident enough
to change that.
Fixes: 28361c4036 ("libata: add extra internal command")
Cc: stable@vger.kernel.org
Tested-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add missing export of ata_qc_get_active(), as per Pali.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In case a driver wants to return an error from qc_prep, return enum
ata_completion_errors. sata_mv is one of those drivers -- see the next
patch. Other drivers return the newly defined AC_ERR_OK.
[v2] use enum ata_completion_errors and AC_ERR_OK.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With CONFIG_DEBUG_TEST_DRIVER_REMOVE set, we may find the following WARN:
[ 23.452574] ------------[ cut here ]------------
[ 23.457190] WARNING: CPU: 59 PID: 1 at drivers/ata/libata-core.c:6676 ata_host_detach+0x15c/0x168
[ 23.466047] Modules linked in:
[ 23.469092] CPU: 59 PID: 1 Comm: swapper/0 Not tainted 5.4.0-rc1-00010-g5b83fd27752b-dirty #296
[ 23.477776] Hardware name: Huawei D06 /D06, BIOS Hisilicon D06 UEFI RC0 - V1.16.01 03/15/2019
[ 23.486286] pstate: a0c00009 (NzCv daif +PAN +UAO)
[ 23.491065] pc : ata_host_detach+0x15c/0x168
[ 23.495322] lr : ata_host_detach+0x88/0x168
[ 23.499491] sp : ffff800011cabb50
[ 23.502792] x29: ffff800011cabb50 x28: 0000000000000007
[ 23.508091] x27: ffff80001137f068 x26: ffff8000112c0c28
[ 23.513390] x25: 0000000000003848 x24: ffff0023ea185300
[ 23.518689] x23: 0000000000000001 x22: 00000000000014c0
[ 23.523987] x21: 0000000000013740 x20: ffff0023bdc20000
[ 23.529286] x19: 0000000000000000 x18: 0000000000000004
[ 23.534584] x17: 0000000000000001 x16: 00000000000000f0
[ 23.539883] x15: ffff0023eac13790 x14: ffff0023eb76c408
[ 23.545181] x13: 0000000000000000 x12: ffff0023eac13790
[ 23.550480] x11: ffff0023eb76c228 x10: 0000000000000000
[ 23.555779] x9 : ffff0023eac13798 x8 : 0000000040000000
[ 23.561077] x7 : 0000000000000002 x6 : 0000000000000001
[ 23.566376] x5 : 0000000000000002 x4 : 0000000000000000
[ 23.571674] x3 : ffff0023bf08a0bc x2 : 0000000000000000
[ 23.576972] x1 : 3099674201f72700 x0 : 0000000000400284
[ 23.582272] Call trace:
[ 23.584706] ata_host_detach+0x15c/0x168
[ 23.588616] ata_pci_remove_one+0x10/0x18
[ 23.592615] ahci_remove_one+0x20/0x40
[ 23.596356] pci_device_remove+0x3c/0xe0
[ 23.600267] really_probe+0xdc/0x3e0
[ 23.603830] driver_probe_device+0x58/0x100
[ 23.608000] device_driver_attach+0x6c/0x90
[ 23.612169] __driver_attach+0x84/0xc8
[ 23.615908] bus_for_each_dev+0x74/0xc8
[ 23.619730] driver_attach+0x20/0x28
[ 23.623292] bus_add_driver+0x148/0x1f0
[ 23.627115] driver_register+0x60/0x110
[ 23.630938] __pci_register_driver+0x40/0x48
[ 23.635199] ahci_pci_driver_init+0x20/0x28
[ 23.639372] do_one_initcall+0x5c/0x1b0
[ 23.643199] kernel_init_freeable+0x1a4/0x24c
[ 23.647546] kernel_init+0x10/0x108
[ 23.651023] ret_from_fork+0x10/0x18
[ 23.654590] ---[ end trace 634a14b675b71c13 ]---
With KASAN also enabled, we may also get many use-after-free reports.
The issue is that when CONFIG_DEBUG_TEST_DRIVER_REMOVE is set, we may
attempt to detach the ata_port before it has been probed.
This is because the ata_ports are async probed, meaning that there is no
guarantee that the ata_port has probed prior to detach. When the ata_port
does probe in this scenario, we get all sorts of issues as the detach may
have already happened.
Fix by ensuring synchronisation with async_synchronize_full(). We could
alternatively use the cookie returned from the ata_port probe
async_schedule() call, but that means managing the cookie, so more
complicated.
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are several firmware versions between version 2AR10001 and
2BA30001, presumably these also have broken FPDMA_AA activation, so
lets play it safe and apply the quirk to all firmware versions.
Suggested-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We've received a bugreport that using LPM with ST1000LM024 drives leads
to system lockups. So it seems that these models are buggy in more then
1 way. Add NOLPM quirk to the existing quirks entry for BROKEN_FPDMA_AA.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1571330
Cc: stable@vger.kernel.org
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 or at your option any
later version this program is distributed in the hope that it will
be useful but without any warranty without even the implied warranty
of merchantability or fitness for a particular purpose see the gnu
general public license for more details you should have received a
copy of the gnu general public license along with this program see
the file copying if not write to the free software foundation 675
mass ave cambridge ma 02139 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 52 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190519154042.342335923@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We've received a bugreport that using LPM with a SAMSUNG
MZ7TE512HMHP-000L1 SSD leads to system instability, we already have
a quirk for the MZ7TD256HAFV-000L9, which is also a Samsun EVO 840 /
PM851 OEM model, so it seems some of these models have a LPM issue.
This commits adds a NOLPM quirk for the model string from the new
bugeport, to avoid the reported stability issues.
Cc: stable@vger.kernel.org
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1571330
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
These devices support read zero after trim (RZAT), as they advertise to
the OS. However, the OS doesn't believe the SSDs unless they are
explicitly whitelisted.
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Juha-Matti Tilli <juha-matti.tilli@iki.fi>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
med_power_with_dipm still causes freezes after updating the firmware to
the latest version (DXT04L5Q).
Set model_rev to NULL and blacklist the device.
Cc: stable@vger.kernel.org
Signed-off-by: Diego Viola <diego.viola@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
med_power_with_dipm causes my T450 to freeze with a SAMSUNG
MZ7TD256HAFV-000L9 SSD (firmware DXT02L5Q).
Switching the LPM to max_performance fixes this issue.
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Diego Viola <diego.viola@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAlukFZsQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpi5MD/424bOq72KPsGNGU6io2c56ecIDItpZiDvq
srDPKN/pdGQ5WZuP2E21Zz+Ry/LP4niUvjZmY88UC9SXx9nxkESyCccxVFGmlGXN
Ttno1l47bu9nvAVPBdZ8brvsODCXk03RiJUDf9NrJsROMB3Xhbo1DtxyjwFwJ/Fr
aokAD3KvFitIbrHhTozxyvzpT55icVu+ykNQypnwdmWSyvebuCvrnQTxRJDNyrgk
wYUB9bhjGaCJzfBT4U7Pi5Is7t16cOSLmw0nv7uo/CUvk1xmSNajxRybCG1IEIFs
eg7Xyo2AFd/+BMwp7cFdOncjLbLzNJW0tJn3bsoJXPVE+MAy2EYYgk760fgqePMV
8afzG6l+obDCefCySj6SMVhXZi3YE640MHWeRBxGJVW5HmWq7Himlt2BUJBvcP72
y6syVoU5gkOTtUun60uF4Lloc0If6MPqvHA5mfDQx6hmQEi/H2XBE0YJxyQoxsZg
8FDq6KMBlmBlxdzfCtOMGNPPS9LIilvgFUpfsR3XzbY5nUhKB4ZZmMCWe9qm6hOl
1yoT6RS1tNV5PL1wQu1cj+d/RHaM7ok0F9FeKhofh1w3NG2x1qajTLNHLb/no7u2
eOJ8mmDxOvJOmU+9H7/Eu4jb2jhpaZPlrX//lxF3VzJcfGwU1wprjsbAjB9mxN1i
4k8CjG0h6w==
=z9pB
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20180920' of git://git.kernel.dk/linux-block
Jens writes:
"Storage fixes for 4.19-rc5
- Fix for leaking kernel pointer in floppy ioctl (Andy Whitcroft)
- NVMe pull request from Christoph, and a single ANA log page fix
(Hannes)
- Regression fix for libata qd32 support, where we trigger an illegal
active command transition. This fixes a CD-ROM detection issue that
was reported, but could also trigger premature completion of the
internal tag (me)"
* tag 'for-linus-20180920' of git://git.kernel.dk/linux-block:
floppy: Do not copy a kernel pointer to user memory in FDGETPRM ioctl
libata: mask swap internal and hardware tag
nvme: count all ANA groups for ANA Log page
hen we're comparing the hardware completion mask passed in from the
driver with the internal tag pending mask, we need to account for the
fact that the internal tag is different from the hardware tag. If not,
then we can end up either prematurely completing the internal tag (since
it's not set in the hw mask), or simply flag an error:
ata2: illegal qc_active transition (100000000->00000001)
If the internal tag is set, then swap that with the hardware tag in this
case before comparing with what the hardware reports.
Fixes: 28361c4036 ("libata: add extra internal command")
Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=201151
Cc: stable@vger.kernel.org
Reported-by: Paul Sbarra <sbarra.paul@gmail.com>
Tested-by: Paul Sbarra <sbarra.paul@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With gcc 4.1.2:
drivers/ata/libata-core.c:7396:33: warning: no newline at end of file
Fixes: 2fa4a32613 ("scsi: libsas: dynamically allocate and free ata host")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pull libata updates from Tejun Heo:
"Nothing too interesting. Mostly ahci and ahci_platform changes, many
around power management"
* 'for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (22 commits)
ata: ahci_platform: enable to get and control reset
ata: libahci_platform: add reset control support
ata: add an extra argument to ahci_platform_get_resources()
ata: sata_rcar: Add r8a77965 support
ata: sata_rcar: exclude setting of PHY registers in Gen3
ata: sata_rcar: really mask all interrupts on Gen2 and later
Revert "ata: ahci_platform: allow disabling of hotplug to save power"
ata: libahci: Allow reconfigure of DEVSLP register
ata: libahci: Correct setting of DEVSLP register
ata: ahci: Enable DEVSLP by default on x86 with SLP_S0
ata: ahci: Support state with min power but Partial low power state
Revert "ata: ahci_platform: convert kcalloc to devm_kcalloc"
ata: sata_rcar: Add rudimentary Runtime PM support
ata: sata_rcar: Provide a short-hand for &pdev->dev
ata: Only output sg element mapped number in verbose debug
ata: Guard ata_scsi_dump_cdb() by ATA_VERBOSE_DEBUG
ata: ahci_platform: convert kcalloc to devm_kcalloc
ata: ahci_platform: convert kzallloc to kcalloc
ata: ahci_platform: correct parameter documentation for ahci_platform_shutdown
libata: remove ata_sff_data_xfer_noirq()
...
This is mostly updates to the usual drivers: mpt3sas, lpfc, qla2xxx,
hisi_sas, smartpqi, megaraid_sas, arcmsr. In addition, with the
continuing absence of Nic we have target updates for tcmu and target
core (all with reviews and acks). The biggest observable change is
going to be that we're (again) trying to switch to mulitqueue as the
default (a user can still override the setting on the kernel command
line). Other major core stuff is the removal of the remaining
Microchannel drivers, an update of the internal timers and some
reworks of completion and result handling.
Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCW3R3niYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishauRAP4yfBKK
dbxF81c/Bxi/Stk16FWkOOrjs4CizwmnMcpM5wD/UmM9o6ebDzaYpZgA8wIl7X/N
o/JckEZZpIp+5NySZNc=
=ggLB
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This is mostly updates to the usual drivers: mpt3sas, lpfc, qla2xxx,
hisi_sas, smartpqi, megaraid_sas, arcmsr.
In addition, with the continuing absence of Nic we have target updates
for tcmu and target core (all with reviews and acks).
The biggest observable change is going to be that we're (again) trying
to switch to mulitqueue as the default (a user can still override the
setting on the kernel command line).
Other major core stuff is the removal of the remaining Microchannel
drivers, an update of the internal timers and some reworks of
completion and result handling"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (203 commits)
scsi: core: use blk_mq_run_hw_queues in scsi_kick_queue
scsi: ufs: remove unnecessary query(DM) UPIU trace
scsi: qla2xxx: Fix issue reported by static checker for qla2x00_els_dcmd2_sp_done()
scsi: aacraid: Spelling fix in comment
scsi: mpt3sas: Fix calltrace observed while running IO & reset
scsi: aic94xx: fix an error code in aic94xx_init()
scsi: st: remove redundant pointer STbuffer
scsi: qla2xxx: Update driver version to 10.00.00.08-k
scsi: qla2xxx: Migrate NVME N2N handling into state machine
scsi: qla2xxx: Save frame payload size from ICB
scsi: qla2xxx: Fix stalled relogin
scsi: qla2xxx: Fix race between switch cmd completion and timeout
scsi: qla2xxx: Fix Management Server NPort handle reservation logic
scsi: qla2xxx: Flush mailbox commands on chip reset
scsi: qla2xxx: Fix unintended Logout
scsi: qla2xxx: Fix session state stuck in Get Port DB
scsi: qla2xxx: Fix redundant fc_rport registration
scsi: qla2xxx: Silent erroneous message
scsi: qla2xxx: Prevent sysfs access when chip is down
scsi: qla2xxx: Add longer window for chip reset
...
Currently when min_power policy is selected, the partial low power state
is not entered and link will try aggressively enter to only slumber state.
Add a new policy which still enable DEVSLP but also try to enter partial
low power state. This policy is presented as "min_power_with_partial".
For information the difference between partial and slumber
Partial – PHY logic is powered up, and in a reduced power state. The link
PM exit latency to active state maximum is 10 ns.
Slumber – PHY logic is powered up, and in a reduced power state. The link
PM exit latency to active state maximum is 10 ms.
Devslp – PHY logic is powered down. The link PM exit latency from this
state to active state maximum is 20 ms, unless otherwise specified by
DETO.
Suggested-and-reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Defining `ATA_DEBUG` there are a lof of messages like below in the log.
[ 16.345472] ata_sg_setup: 1 sg elements mapped
As that is too verbose, only output these messages in verbose debug.
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
There have been several reports of LPM related hard freezes about once
a day on multiple Lenovo 50 series models. Strange enough these reports
where not disk model specific as LPM issues usually are and some users
with the exact same disk + laptop where seeing them while other users
where not seeing these issues.
It turns out that enabling LPM triggers a firmware bug somewhere, which
has been fixed in later BIOS versions.
This commit adds a new ahci_broken_lpm() function and a new ATA_FLAG_NO_LPM
for dealing with this.
The ahci_broken_lpm() function contains DMI match info for the 4 models
which are known to be affected by this and the DMI BIOS date field for
known good BIOS versions. If the BIOS date is older then the one in the
table LPM will be disabled and a warning will be printed.
Note the BIOS dates are for known good versions, some older versions may
work too, but we don't know for sure, the table is using dates from BIOS
versions for which users have confirmed that upgrading to that version
makes the problem go away.
Unfortunately I've been unable to get hold of the reporter who reported
that BIOS version 2.35 fixed the problems on the W541 for him. I've been
able to verify the DMI_SYS_VENDOR and DMI_PRODUCT_VERSION from an older
dmidecode, but I don't know the exact BIOS date as reported in the DMI.
Lenovo keeps a changelog with dates in their release notes, but the
dates there are the release dates not the build dates which are in DMI.
So I've chosen to set the date to which we compare to one day past the
release date of the 2.34 BIOS. I plan to fix this with a follow up
commit once I've the necessary info.
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
